path: root/testsuite/normal/pdebuild-normal-sid.log

dpkg-buildpackage: source package is dsh
dpkg-buildpackage: source version is 0.25.8-1
dpkg-buildpackage: source changed by Junichi Uekawa <dancer@debian.org>
dpkg-buildpackage: source version without epoch 0.25.8-1
 fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp configure-stamp
/usr/bin/make clean
make[1]: Entering directory `/TESTDIR/dir2/dsh-0.25.8'
make[1]: *** No rule to make target `clean'.  Stop.
make[1]: Leaving directory `/TESTDIR/dir2/dsh-0.25.8'
make: [clean] Error 2 (ignored)
/usr/bin/make distclean
make[1]: Entering directory `/TESTDIR/dir2/dsh-0.25.8'
make[1]: *** No rule to make target `distclean'.  Stop.
make[1]: Leaving directory `/TESTDIR/dir2/dsh-0.25.8'
make: [clean] Error 2 (ignored)
dh_clean
 dpkg-source -b dsh-0.25.8
dpkg-source: building dsh using existing dsh_0.25.8.orig.tar.gz
dpkg-source: building dsh in dsh_0.25.8-1.diff.gz
dpkg-source: warning: file debian/compat has no final newline (either original or modified version)
dpkg-source: warning: file dcp.sh has no final newline (either original or modified version)
dpkg-source: building dsh in dsh_0.25.8-1.dsc
 dpkg-genchanges -S
dpkg-genchanges: including full source code in upload
dpkg-buildpackage: source only upload (original source is included)
W: /home/dancer/.pbuilderrc does not exist
I: using fakeroot in build.
Current time: TIME
pbuilder-time-stamp: XXXX
Building the build Environment
 -> extracting base tarball [/TESTDIR/testimage]
 -> creating local configuration
 -> copying local configuration
 -> mounting /proc filesystem
 -> mounting /dev/pts filesystem
 -> policy-rc.d already exists
Installing the build-deps
 -> Attempting to parse the build-deps 
 -> Considering build-dep debhelper (>> 3.0.0)
   -> Trying debhelper
 -> Considering build-dep libdshconfig1-dev (>= 0.20.11-1)
   -> Trying libdshconfig1-dev
 -> Installing  debhelper libdshconfig1-dev
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
  file gettext gettext-base html2text intltool-debian libdshconfig1 libmagic1
  po-debconf
Suggested packages:
  dh-make cvs gettext-doc
Recommended packages:
  libmail-sendmail-perl libcompress-zlib-perl
The following NEW packages will be installed:
  debhelper file gettext gettext-base html2text intltool-debian libdshconfig1
  libdshconfig1-dev libmagic1 po-debconf
0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded.
Need to get 3552kB of archives.
After unpacking 12.0MB of additional disk space will be used.
Get:1 http://cdn.debian.or.jp sid/main libmagic1 4.21-1 [332kB]
Get:2 http://cdn.debian.or.jp sid/main file 4.21-1 [40.0kB]
Get:3 http://cdn.debian.or.jp sid/main gettext-base 0.16.1-1 [132kB]
Get:4 http://cdn.debian.or.jp sid/main html2text 1.3.2a-3 [92.7kB]
Get:5 http://cdn.debian.or.jp sid/main gettext 0.16.1-1 [2261kB]
Get:6 http://cdn.debian.or.jp sid/main intltool-debian 0.35.0+20060710.1 [30.8kB]
Get:7 http://cdn.debian.or.jp sid/main po-debconf 1.0.8 [111kB]
Get:8 http://cdn.debian.or.jp sid/main debhelper 5.0.50 [517kB]
Get:9 http://cdn.debian.or.jp sid/main libdshconfig1 0.20.12-2 [10.9kB]
Get:10 http://cdn.debian.or.jp sid/main libdshconfig1-dev 0.20.12-2 [25.3kB]
Fetched XXXB in Xs (XXXXXB/s)
Selecting previously deselected package libmagic1.
(Reading database ... 11066 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.21-1_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.21-1_amd64.deb) ...
Selecting previously deselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.16.1-1_amd64.deb) ...
Selecting previously deselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-3_amd64.deb) ...
Selecting previously deselected package gettext.
Unpacking gettext (from .../gettext_0.16.1-1_amd64.deb) ...
Selecting previously deselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ...
Selecting previously deselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.8_all.deb) ...
Selecting previously deselected package debhelper.
Unpacking debhelper (from .../debhelper_5.0.50_all.deb) ...
Selecting previously deselected package libdshconfig1.
Unpacking libdshconfig1 (from .../libdshconfig1_0.20.12-2_amd64.deb) ...
Selecting previously deselected package libdshconfig1-dev.
Unpacking libdshconfig1-dev (from .../libdshconfig1-dev_0.20.12-2_amd64.deb) ...
Setting up libmagic1 (4.21-1) ...

Setting up file (4.21-1) ...
Setting up gettext-base (0.16.1-1) ...

Setting up html2text (1.3.2a-3) ...

Setting up gettext (0.16.1-1) ...

Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.8) ...
Setting up debhelper (5.0.50) ...
Setting up libdshconfig1 (0.20.12-2) ...

Setting up libdshconfig1-dev (0.20.12-2) ...
 -> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
  fakeroot
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 111kB of archives.
After unpacking 451kB of additional disk space will be used.
Get:1 http://cdn.debian.or.jp sid/main fakeroot 1.7.1 [111kB]
Fetched XXXB in Xs (XXXXXB/s)
Selecting previously deselected package fakeroot.
(Reading database ... 11741 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.7.1_amd64.deb) ...
Setting up fakeroot (1.7.1) ...

Copying source file
    -> copying [../dsh_0.25.8-1.dsc]
    -> copying [../dsh_0.25.8.orig.tar.gz]
    -> copying [../dsh_0.25.8-1.diff.gz]
Extracting source
dpkg-source: warning: extracting unsigned source package (./dsh_0.25.8-1.dsc)
dpkg-source: extracting dsh in dsh-0.25.8
dpkg-source: unpacking dsh_0.25.8.orig.tar.gz
dpkg-source: applying ./dsh_0.25.8-1.diff.gz
 -> Building the package
dpkg-buildpackage: source package is dsh
dpkg-buildpackage: source version is 0.25.8-1
dpkg-buildpackage: source changed by Junichi Uekawa <dancer@debian.org>
dpkg-buildpackage: host architecture amd64
dpkg-buildpackage: source version without epoch 0.25.8-1
 fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp configure-stamp
/usr/bin/make clean
make[1]: Entering directory `/tmp/buildd/dsh-0.25.8'
make[1]: *** No rule to make target `clean'.  Stop.
make[1]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make: [clean] Error 2 (ignored)
/usr/bin/make distclean
make[1]: Entering directory `/tmp/buildd/dsh-0.25.8'
make[1]: *** No rule to make target `distclean'.  Stop.
make[1]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make: [clean] Error 2 (ignored)
dh_clean
 dpkg-source -b dsh-0.25.8
dpkg-source: building dsh using existing dsh_0.25.8.orig.tar.gz
dpkg-source: building dsh in dsh_0.25.8-1.diff.gz
dpkg-source: warning: file debian/compat has no final newline (either original or modified version)
dpkg-source: warning: file dcp.sh has no final newline (either original or modified version)
dpkg-source: building dsh in dsh_0.25.8-1.dsc
 debian/rules build
dh_testdir
INSTALL_PROGRAM='install -p    -o root -g root  -m  755 -s' CFLAGS='-Wall -g -O2' \
	 ./configure --prefix=/usr --sysconfdir=/etc/dsh --mandir=/usr/share/man
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for strerror in -lcposix... no
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking whether make sets $(MAKE)... (cached) yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for an ANSI C-conforming const... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking for gettext... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for stdlib.h... (cached) yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking netgroup.h usability... no
checking netgroup.h presence... no
checking for netgroup.h... no
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for libdshconfig.h ... yes
checking for asprintf... yes
checking for strdup... yes
checking for getopt_long... yes
checking for getline... yes
checking for dup2... yes
checking for setlocale... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for setnetgrent... yes
checking for getnetgrent... yes
checking for endnetgrent... yes
checking for open_dshconfig in -ldshconfig... yes
checking netdb.h has setnetgrent that returns void... no
checking getopt with a GNU option reordering extention... yes, disabling
configure: creating ./config.status
config.status: creating po/Makefile.in
config.status: WARNING:  po/Makefile.in.in seems to ignore the --datarootdir setting
config.status: creating m4/Makefile
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
touch configure-stamp
dh_testdir
/usr/bin/make
make[1]: Entering directory `/tmp/buildd/dsh-0.25.8'
/usr/bin/make  all-recursive
make[2]: Entering directory `/tmp/buildd/dsh-0.25.8'
Making all in m4
make[3]: Entering directory `/tmp/buildd/dsh-0.25.8/m4'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/buildd/dsh-0.25.8/m4'
Making all in po
make[3]: Entering directory `/tmp/buildd/dsh-0.25.8/po'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/buildd/dsh-0.25.8/po'
make[3]: Entering directory `/tmp/buildd/dsh-0.25.8'
if gcc -DHAVE_CONFIG_H -I. -I. -I.    -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-dsh.o -MD -MP -MF ".deps/dsh-dsh.Tpo" -c -o dsh-dsh.o `test -f 'dsh.c' || echo './'`dsh.c; \
	then mv -f ".deps/dsh-dsh.Tpo" ".deps/dsh-dsh.Po"; else rm -f ".deps/dsh-dsh.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.    -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-linkedlist.o -MD -MP -MF ".deps/dsh-linkedlist.Tpo" -c -o dsh-linkedlist.o `test -f 'linkedlist.c' || echo './'`linkedlist.c; \
	then mv -f ".deps/dsh-linkedlist.Tpo" ".deps/dsh-linkedlist.Po"; else rm -f ".deps/dsh-linkedlist.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.    -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-parameter.o -MD -MP -MF ".deps/dsh-parameter.Tpo" -c -o dsh-parameter.o `test -f 'parameter.c' || echo './'`parameter.c; \
	then mv -f ".deps/dsh-parameter.Tpo" ".deps/dsh-parameter.Po"; else rm -f ".deps/dsh-parameter.Tpo"; exit 1; fi
/bin/sh ./libtool --tag=CC --mode=link gcc  -Wall -g -O2   -o dsh  dsh-dsh.o dsh-linkedlist.o dsh-parameter.o  -ldshconfig 
mkdir .libs
gcc -Wall -g -O2 -o dsh dsh-dsh.o dsh-linkedlist.o dsh-parameter.o  /usr/lib/libdshconfig.so
mkdir build-man
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.1 > build-man/dsh.1
sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.5 > build-man/dsh.conf.5
make[3]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make[2]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make[1]: Leaving directory `/tmp/buildd/dsh-0.25.8'
/usr/bin/make check
make[1]: Entering directory `/tmp/buildd/dsh-0.25.8'
Making check in m4
make[2]: Entering directory `/tmp/buildd/dsh-0.25.8/m4'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/tmp/buildd/dsh-0.25.8/m4'
Making check in po
make[2]: Entering directory `/tmp/buildd/dsh-0.25.8/po'
make[2]: Nothing to be done for `check'.
make[2]: Leaving directory `/tmp/buildd/dsh-0.25.8/po'
make[2]: Entering directory `/tmp/buildd/dsh-0.25.8'
/usr/bin/make  dsh
make[3]: Entering directory `/tmp/buildd/dsh-0.25.8'
make[3]: `dsh' is up to date.
make[3]: Leaving directory `/tmp/buildd/dsh-0.25.8'
/usr/bin/make  check-TESTS
make[3]: Entering directory `/tmp/buildd/dsh-0.25.8'
PASS: tests/param-f.sh
dsh: File ./tests/nonexistent.file could not be opened for read
PASS: tests/param-f-fail.sh
PASS: tests/param-f-with-space.sh
PASS: tests/param-m.sh
test to check that unknown parameter checking is right.
./dsh: unrecognized option `--unknown-parameter'
./dsh: invalid option -- u
PASS: tests/param-unknown.sh
test1
test2
dsh: Process terminated (before write).
PASS: tests/param-i.sh
Check that cn4 option is working.
PASS: tests/param-cn4.sh
test to check that -b0 is rejected, and -b1 is accepted
Buffer size needs to be greater than 1
Buffer size needs to be greater than 1
a
b
PASS: tests/param-b-0.sh
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
success
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
success
success
success
success
success
a: dsh: Failed executing ./invalid-exec-file with llexec call
b: dsh: Failed executing ./invalid-exec-file with llexec call
d: dsh: Failed executing ./invalid-exec-file with llexec call
c: dsh: Failed executing ./invalid-exec-file with llexec call
success
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
dsh: Failed executing ./invalid-exec-file with llexec call
success
PASS: tests/param-r-invalid.sh
1: 1
2: 2
dsh: fork limit and wait shell cannot be specified at the same time
PASS: tests/param-F-invalid.sh
Wed Jun  6 03:04:16 UTC 2007
2: Using sleep as the remote shell
2: Show machine names on output
2: Adding machine 5,4,3,2,1 to list
2: Setting forklimit to 3 and wait_shell to 0
2: DUMPing parameters passed to llexec
2: [2] 
Using sleep as the remote shell
Show machine names on output
Adding machine 5,4,3,2,1 to list
Setting forklimit to 3 and wait_shell to 0
DUMPing parameters passed to llexec
[2] 
3: Using sleep as the remote shell
3: Show machine names on output
3: Adding machine 5,4,3,2,1 to list
3: Setting forklimit to 3 and wait_shell to 0
3: DUMPing parameters passed to llexec
3: [3] 
Using sleep as the remote shell
Show machine names on output
Adding machine 5,4,3,2,1 to list
Setting forklimit to 3 and wait_shell to 0
DUMPing parameters passed to llexec
[3] 
1: Using sleep as the remote shell
1: Show machine names on output
1: Adding machine 5,4,3,2,1 to list
1: Setting forklimit to 3 and wait_shell to 0
1: ... Waiting for process to end with waitpid
1: DUMPing parameters passed to llexec
1: [1] 
Using sleep as the remote shell
Show machine names on output
Adding machine 5,4,3,2,1 to list
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
DUMPing parameters passed to llexec
[1] 
4: Using sleep as the remote shell
4: Show machine names on output
4: Adding machine 5,4,3,2,1 to list
4: Setting forklimit to 3 and wait_shell to 0
4: DUMPing parameters passed to llexec
4: [4] 
Using sleep as the remote shell
Show machine names on output
Adding machine 5,4,3,2,1 to list
Setting forklimit to 3 and wait_shell to 0
DUMPing parameters passed to llexec
[4] 
5: Using sleep as the remote shell
5: Show machine names on output
5: Adding machine 5,4,3,2,1 to list
5: Setting forklimit to 3 and wait_shell to 0
5: DUMPing parameters passed to llexec
5: [5] 
Using sleep as the remote shell
Show machine names on output
Adding machine 5,4,3,2,1 to list
Setting forklimit to 3 and wait_shell to 0
DUMPing parameters passed to llexec
[5] 
--- Terminated running
Using sleep as the remote shell
Show machine names on output
Adding machine 5,4,3,2,1 to list
Setting forklimit to 3 and wait_shell to 0
... Waiting for process to end with waitpid
... Waiting for process to end with waitpid
Wed Jun  6 03:04:22 UTC 2007
PASS: tests/param-F-forklimit.sh
PASS: tests/param-gnu-getopt.sh
PASS: tests/news-okay.sh
a: a
b: b
c: c
PASS: tests/segv-catcher.sh
l w
PASS: tests/test-bufferoverflow.sh
PASS: tests/machinelist-comment-test.sh
PASS: tests/machinelist-order.sh
===================
All 17 tests passed
===================
make[3]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make[2]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make[1]: Leaving directory `/tmp/buildd/dsh-0.25.8'
touch build-stamp
 fakeroot debian/rules binary
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
# Add here commands to install the package into debian/dsh.
/usr/bin/make install DESTDIR=/tmp/buildd/dsh-0.25.8/debian/dsh
make[1]: Entering directory `/tmp/buildd/dsh-0.25.8'
Making install in m4
make[2]: Entering directory `/tmp/buildd/dsh-0.25.8/m4'
make[3]: Entering directory `/tmp/buildd/dsh-0.25.8/m4'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/tmp/buildd/dsh-0.25.8/m4'
make[2]: Leaving directory `/tmp/buildd/dsh-0.25.8/m4'
Making install in po
make[2]: Entering directory `/tmp/buildd/dsh-0.25.8/po'
/bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share
mkdir -p -- /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share
mkdir -p -- /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/locale/ja/LC_MESSAGES
installing ja.gmo as /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/locale/ja/LC_MESSAGES/dsh.mo
if test "dsh" = "gettext"; then \
	  /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/gettext/po; \
	  for file in Makefile.in.in Makevars remove-potcdate.sin   ; do \
	    /usr/bin/install -c -m 644 ./$file \
			    /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/gettext/po/$file; \
	  done; \
	else \
	  : ; \
	fi
make[2]: Leaving directory `/tmp/buildd/dsh-0.25.8/po'
make[2]: Entering directory `/tmp/buildd/dsh-0.25.8'
make[3]: Entering directory `/tmp/buildd/dsh-0.25.8'
test -z "/usr/bin" || mkdir -p -- "/tmp/buildd/dsh-0.25.8/debian/dsh/usr/bin"
  /bin/sh ./libtool --mode=install install -p    -o root -g root  -m  755 -s 'dsh' '/tmp/buildd/dsh-0.25.8/debian/dsh/usr/bin/dsh'
install -p -o root -g root -m 755 -s dsh /tmp/buildd/dsh-0.25.8/debian/dsh/usr/bin/dsh
test -z "/etc/dsh" || mkdir -p -- "/tmp/buildd/dsh-0.25.8/debian/dsh/etc/dsh"
 /usr/bin/install -c -m 644 'dsh.conf' '/tmp/buildd/dsh-0.25.8/debian/dsh/etc/dsh/dsh.conf'
for LANGS in ja ; do \
		mkdir -p /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/$LANGS/man1 ;\
		mkdir -p /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/$LANGS/man5 ;\
		sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.$LANGS.1 \
			> /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/$LANGS/man1/dsh.1 ; \
		sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.$LANGS.5 \
			> /tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/$LANGS/man5/dsh.conf.5 ; \
	done
test -z "/usr/share/man/man1" || mkdir -p -- "/tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/man1"
 /usr/bin/install -c -m 644 './build-man/dsh.1' '/tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/man1/dsh.1'
test -z "/usr/share/man/man5" || mkdir -p -- "/tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/man5"
 /usr/bin/install -c -m 644 './build-man/dsh.conf.5' '/tmp/buildd/dsh-0.25.8/debian/dsh/usr/share/man/man5/dsh.conf.5'
make[3]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make[2]: Leaving directory `/tmp/buildd/dsh-0.25.8'
make[1]: Leaving directory `/tmp/buildd/dsh-0.25.8'
cp /tmp/buildd/dsh-0.25.8/debian/machines.list /tmp/buildd/dsh-0.25.8/debian/dsh/etc/dsh/machines.list
cp /tmp/buildd/dsh-0.25.8/dsh.conf /tmp/buildd/dsh-0.25.8/debian/dsh/etc/dsh/dsh.conf
ln -s ../machines.list /tmp/buildd/dsh-0.25.8/debian/dsh/etc/dsh/group/all
install -d /tmp/buildd/dsh-0.25.8/debian/dsh/usr/lib/update-cluster
install -m 755 /tmp/buildd/dsh-0.25.8/debian/dsh.updatelist /tmp/buildd/dsh-0.25.8/debian/dsh/usr/lib/update-cluster/
dh_testdir
dh_testroot
dh_installdocs NEWS
dh_installexamples
dh_installmenu
dh_installman
dh_installchangelogs ChangeLog 
dh_link
dh_strip
dh_shlibdeps
dh_compress
dh_fixperms
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package `dsh' in `../dsh_0.25.8-1_amd64.deb'.
 dpkg-genchanges
dpkg-genchanges: including full source code in upload
dpkg-buildpackage: full upload (original source is included)
 -> unmounting dev/pts filesystem
 -> unmounting proc filesystem
 -> cleaning the build env 
    -> removing directory /TESTDIR/dir3/NUM and its subdirectories
Current time: TIME
pbuilder-time-stamp: XXXX