path: root/Documentation/pbuilder-doc.xml

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "/usr/share/sgml/docbook/dtd/xml/4.2/docbookx.dtd"> 
<!-- the original of this documentation is in pbuilder source tar-ball,
  and the latest version is found in git repository. -->
<book xml:lang="en">
  <bookinfo>
    <date>2007-5-27</date>
    <title>pbuilder User's Manual</title>
    <abbrev>pbuilder-doc</abbrev>
    <subtitle>Usage and operations</subtitle>
    <releaseinfo>documentation in progress</releaseinfo>
    <authorgroup>
      <author>
	<firstname>Junichi</firstname>
	<surname>Uekawa</surname>
      </author>
    </authorgroup>
  </bookinfo>

  <!-- FIXME: consistent markup of commands, files, and variables -->
  <chapter id="introduction">
    <title>Introducing pbuilder</title>
    <sect1 id="aim">
      <title>Aims of pbuilder</title>
      <para>
	<command>pbuilder</command> stands for
	Personal Builder, and it is an automatic Debian Package Building system
	for personal development workstation environments.
	<command>pbuilder</command> aims to be an
	easy-to-setup system
	for auto-building Debian packages inside a clean-room
	environment, so that it is possible to verify that
	a package can be built on most Debian installations.
	The clean-room environment is achieved through the use of
	a base chroot image,
	so that only minimal packages will be installed inside the
	chroot.
      </para>
      <para>
	The Debian distribution consists of free software
	accompanied with source.
	The source code within Debian's "main" section
	must build within Debian "main",
	with only the explicitly specified build-dependencies
	installed.
      </para>
      <para>
	The primary aim of <command>pbuilder</command> is different from other
	auto-building systems in Debian in that its aim is not
	to try to build as many packages as possible.
        It does not try to guess
	what a package needs, and in most cases it tries the
	worst choice of all if there is a choice to be made.
      </para>
      <para>
	In this way, <command>pbuilder</command> tries to ensure
	that packages
	tested against <command>pbuilder</command> will build properly in
	most Debian installations, hopefully resulting
	in a good overall Debian source-buildability.
      </para>
      <para>
	The goal of making Debian buildable from source is somewhat
	accomplished, and has seen good progress.  In the past age of
	Debian 3.0, there were many problems when building from
	source.  More recent versions of Debian is much better.
      </para>
    </sect1>
  </chapter>
  <chapter id="usingpbuilder">
    <title>Using pbuilder</title>
    <para>
      There are several simple commands for operation.
      <command>pbuilder create</command>, <command>pbuilder
      update</command>, and <command>pbuilder build</command> commands
      are the typical commands used.  Let us look at the commands
      one by one.
    </para>
    <sect1 id="creatingbase">
      <title>Creating a base chroot image tar-ball</title>
      <para>
	<command>pbuilder create</command>
	will create a base chroot image tar-ball (base.tgz).
	All other commands will operate on the resulting base.tgz

	If the Debian release to be created within chroot is not going
	to be "sid" (which is the default), the distribution code-name
	needs to be specified with the
	<command><option>--distribution</option></command>
	command-line option.
      </para>
      <para>
	<command>debootstrap</command> <footnote>
	  <para>debootstrap or cdebootstrap can be chosen</para>
	</footnote>
	is used to create
	the bare minimum Debian installation,
	and then build-essential packages are installed on top
	of the minimum installation using <command>apt-get</command>
	inside the chroot.
      </para>
      <para>
	For fuller documentation of command-line options, see
	the pbuilder.8 manual page.
	Some configuration will be required for <filename>/etc/pbuilderrc</filename>
	for the mirror site
	<footnote>
	  <para>
	    The mirror site should preferably be
	    a local mirror or a cache server,
	    so as not to overload the public mirrors with
	    a lot of access.
	    Use of tools such as apt-proxy would be advisable.
	  </para>
	</footnote>
	to use, and proxy configuration may be required to allow access
	through HTTP.
	See the pbuilderrc.5 manual page for details.
      </para>
    </sect1>
    <sect1 id="basechroot">
      <title>Updating the base.tgz</title>
      <para><command>pbuilder update</command>
	will update the base.tgz.
	It will extract the chroot, invoke <command>apt-get update</command>
	and <command>apt-get dist-upgrade</command> inside the
	chroot, and then recreate the base.tgz (the base tar-ball.)
      </para>
      <para>
	It is possible to switch the distribution which the 
	base.tgz is targeted at at this point.
	Specify <command><option>--distribution <parameter>sid</parameter></option> <option>--override-config</option></command> to change the distribution
	to sid.
	<footnote>
	  <para>Only upgrading is supported.
	  Debian does not generally support downgrading (yet?).</para>
	</footnote>
      </para>
      <para>
	For fuller documentation of command-line options, see
	the pbuilder.8 manual page
      </para>
    </sect1>
    <sect1 id="buildpackagechroot">
      <title>Building a package using the base.tgz</title>
      <para>
	To build a package inside the chroot, invoke
	<command>pbuilder build <option>whatever.dsc</option></command>.
	<command>pbuilder</command> will extract
	the base.tgz to a temporary working directory,
	enter the directory with chroot, 
	satisfy the build-dependencies inside chroot,
	and build the package.
	The built packages will be moved to a
	directory specified with
	the <command><option>--buildresult</option></command>
	command-line option.
      </para>
      <para>
	The <command><option>--basetgz</option></command> option can be
	used to specify which base.tgz to use.
      </para>
      <para>
	<command>pbuilder</command> will extract a fresh base chroot
	image from base.tgz. (base.tgz is created with
	<command>pbuilder create</command>, and updated with
	<command>pbuilder update</command>).  The chroot is populated
	with build-dependencies by parsing debian/control and invoking
	<command>apt-get</command>.
      </para>
      <para>
	For fuller documentation of command-line options, see
	the pbuilder.8 manual page
      </para>
    </sect1>
    <sect1 id="pdebuild">
      <title>Facilitating Debian Developers' typing, pdebuild</title>
      <para>
	<command>pdebuild</command> is a little wrapper
	script that does the most frequent of all tasks.
	A Debian Developer may try to do <command>debuild</command>, and
	build a package, inside a Debian source directory.
	<command>pdebuild</command> will allow similar
	control, and allow package to be built inside the chroot,
	to check that the current source tree will build happily
	inside the chroot.
      </para>
      <para>
	<command>pdebuild</command> calls <command>dpkg-source</command>
	to build the source packages, and then invokes
	<command>pbuilder</command> on the resulting source package.
	However, unlike debuild, the resulting deb files will be
	found in the <command><option>--buildresult</option></command>
	directory.
      </para>
      <para>
	See the pdebuild.1 manual page for more details.
      </para>
      <para>
	There is a slightly different mode of operation available
	in <command>pdebuild</command> since version 0.97. <command>pdebuild</command> usually runs
	<command>debian/rules clean</command> outside of the chroot;
	however, it is possible to change the behavior to run it
	inside the chroot with
	the <command><option>--use-pdebuild-internal</option></command>.
	It will try to bind mount the working directory inside chroot,
	and run <command>dpkg-buildpackage</command> inside.
	It has the following characteristics, and is not yet the 
	default mode of operation.
      </para>
      <itemizedlist>
	<listitem>
	  <para>
	    Satisfies build-dependency inside the chroot before creating source package.
	    (which is a good point that default <command>pdebuild</command> could not do).
	  </para>
	</listitem>
	<listitem>
	  <para>The working directory is modified
	  from inside the chroot.</para>
	</listitem>
	<listitem>
	  <para>Building with <command>pdebuild</command> does not guarantee
	  that it works with <command>pbuilder</command>.</para>
	</listitem>
	<listitem>
	  <para>If making the source package fails,
	  the session using the chroot is wasted
	  (chroot creation takes a bit of time, which should be improved with cowdancer).</para>
	</listitem>
	<listitem>
	  <para>Does not work in the same manner as it used to;
	  for example, <command><option>--buildresult</option></command>
	  does not have any effect.</para>
	</listitem>
	<listitem>
	  <para>The build inside chroot is ran with the current user outside chroot.
	  </para>
	</listitem>
      </itemizedlist>
    </sect1>
    <sect1 id="configfile">
      <title>Configuration Files</title>
      <para>
	It is possible to specify all settings by command-line
	options. However, for typing convenience, it is possible to
	use a configuration file.
      </para>
      <para>
	<filename>/etc/pbuilderrc</filename> and
	<filename>${HOME}/.pbuilderrc</filename>
	are read in when <command>pbuilder</command> is invoked.
	The possible options are documented in
	the pbuilderrc.5 manual page.
      </para>
      <para>
	It is useful to use <option>--configfile</option> option to load up a preset
	configuration file  when switching between configuration files for
	different distributions.
      </para>
      <para>
	Please note <filename>${HOME}/.pbuilderrc</filename> supersede system settings.  For
	example, if you are upgrading from sarge to etch, you may need to
	adjust some part of your local setting just like new
	<filename>/usr/share/pbuilder/pbuilderrc</filename>, e.g., "unset DEBOOTSTRAPOPTS", to cope
	with the use of cdebootstrap.  The same care is needed if you edited
	old system setting in <filename>/etc/pbuilderrc</filename>.
      </para>
    </sect1>
    <sect1 id="nonrootchroot">
      <title>Building packages as non-root inside the chroot</title>
      <para>
	<command>pbuilder</command> requires full root privilege
	when it is satisfying the build-dependencies, but most packages do not
	need root privilege to build, or even refused to build when they are built as root.
	<command>pbuilder </command> can create a user which is only used
	inside <command>pbuilder </command> and use that user id when
	building, and use the <command>fakeroot</command> command
	when root privilege is required.
      </para>
      <para>
	BUILDUSERID configuration option should be set to a value for a user id that
	does not already exist on the system, so that it is more difficult for
	packages that are being built with
	<command>pbuilder</command> to affect the environment outside the chroot.
	When BUILDUSERNAME configuration option is also set,
	<command>pbuilder</command> will use the specified user name and fakeroot for building packages,
	instead of running as root inside chroot.
      </para>
      <para>
	Even when using the fakerooting method, <command>pbuilder</command> will run with
	root privilege when it is required.
	For example, when installing
	packages to the chroot, <command>pbuilder</command> will run under root privilege.
      </para>
      <para>
	To be able to invoke <command>pbuilder</command> without being
	root, you need to use user-mode-linux, as explained
	in <xref linkend="pbuilder-uml"/>.
      </para>
    </sect1>
    <sect1 id="backporting">
      <title>Using pbuilder for back-porting</title>
      <para>
	<command>pbuilder</command> can be used for back-porting software from
	the latest Debian distribution to
	the older stable distribution, by using a chroot that contains
	an image of the older distribution, and building packages inside the
	chroot.
	There are several points to consider, and due to the following reasons,
	automatic back-porting is usually not possible, and
	manual interaction is required:
      </para>
      <itemizedlist>
	<listitem>
	  <para>The package from the unstable distribution
	  may depend on packages or versions of packages which
	  are only available in unstable.
	  Thus, it may not be possible to satisfy Build-Depends:
	  on stable (without additional backporting work).</para>
	</listitem>
	<listitem>
	  <para>The stable distribution may have bugs that have been
	  fixed in unstable which need to be worked around.</para></listitem>
	<listitem>
	  <para>The package in the unstable distribution may have
	  problems building even on unstable.</para>
	</listitem>
      </itemizedlist>
    </sect1>
    <sect1 id="massbuild">
      <title>Mass-building packages</title>
      <para>
	<command>pbuilder</command> can be automated, because its operations are
	non-interactive.
	It is possible to run <command>pbuilder</command> through multiple packages
	non-interactively.
	Several such scripts are known to exist.
	Junichi Uekawa has been running such a script since 2001,
	and has been filing bugs on packages that fail the
	test of <command>pbuilder</command>. There were several problems with auto-building:
      </para>
      <itemizedlist>
	<listitem>
	  <para>Build-Dependencies need to install non-interactively, but
	    some packages are so broken that they cannot install
	    without interaction (like postgresql).</para>
	</listitem>
	<listitem>
	  <para>When a library package breaks, or gcc/gcj/g++ breaks,
	    or even bison, a large number of build failures are reported.
	    (gcj-3.0 which had no "javac", bison which got more strict, etc.)
	  </para>
	</listitem>
	<listitem>
	  <para>Some people were quite hostile against build failure reports.</para>
	</listitem>
      </itemizedlist>
      <para>
	Most of the initial bugs have been resolved in the <command>pbuilder</command>
	sweep done around 2002, but these transitional problems which
	affect a large portion of Debian Archive do arise from time to
	time.  Regression tests have their values.
      </para>
      <para>
	A script that was used by Junichi Uekawa in the initial run is now included in
	the <command>pbuilder</command> distribution, as <command>pbuildd.sh</command>.
	It is available in <filename>/usr/share/doc/pbuilder/examples/pbuildd/</filename>
	and its configuration is in <filename>/etc/pbuilder/pbuildd-config.sh</filename>.
	It should be easy enough to set up for people who are used to
	<command>pbuilder</command>. It has been running for quite a while, and it should be
	possible to set the application up on your system also.
	This version of the code is not the most tested, but should function as a starter.
      </para>
      <para>
	To set up pbuildd, there are some points to be aware of.
      </para>
      <itemizedlist>
	<listitem>
	  <para>A file <filename>./avoidlist</filename> needs to be available with the list of packages to avoid building. </para>
	</listitem>
	<listitem>
	  <para>It will try building anything, even packages
	  which are not aimed for your architecture.</para>
	</listitem>
	<listitem>
	  <para>Because you are running random build scripts, it is better to use
	  the fakeroot option of <command>pbuilder</command>, to avoid running the build
	  under root privilege.</para>
	</listitem>
	<listitem>
	  <para>Because not all builds are guaranteed to finish in a finite time,
	    setting a timeout is probably necessary, or pbuildd may stall with
	    a bad build.</para>
	</listitem>
	<listitem>
	  <para>
	    Some packages require a lot of disk space,
	    around 2GB seems to be sufficient for the largest packages for the time being.
            If you find otherwise, please inform the maintainer of this documentation.
	  </para>
	</listitem>
      </itemizedlist>
    </sect1>
    <sect1 id="autobackport">
      <title>Auto-backporting scripts</title>
      <para>
	There are some people who use <command>pbuilder</command> to automatically back-port
	a subset of packages to the stable distribution.
      </para>
      <para>
	I would like some information on how people are doing it,
	I would appreciate any feedback or information on
	how you are doing, or any examples.
      </para>
    </sect1>
    <sect1 id="autotesting">
      <title>Using pbuilder for automated testing of packages</title>
      <para>
	<command>pbuilder</command> can be used for automated testing of packages.
	It has the feature of allowing hooks to be placed,
	and these hooks can try to install packages inside
	the chroot, or run them, or whatever else that
	can be done. Some known tests and ideas:
      </para>
      <itemizedlist>
	<listitem>
	  <para>Automatic install-remove-upgrade-remove-install-purge-upgrade-purge test-suite (distributed as an example, <filename>B91dpkg-i</filename>),
	    or just check that everything installs somewhat (<filename>execute_installtest.sh</filename>).</para>
	</listitem>

	<listitem>
	  <para>Automatically running lintian (distributed as an example in
	    <filename>/usr/share/doc/pbuilder/examples/B90lintian</filename>).</para>
	</listitem>
	<listitem>
	  <para>Automatic debian-test of the package?
	  The debian-test package has been removed from Debian.
	  A <command>pbuilder</command> implementation can be found as 
	  debian/pbuilder-test directory, implemented through B92test-pkg script.</para>
	</listitem>
      </itemizedlist>
      <para>
	To use B92test-pkg script, first, add it to your hook directory.
	<footnote>
	  <para>It is possible to specify <command>--hookdir
	    /usr/share/doc/pbuilder/examples</command> command-line
	    option to include all example hooks as
	    well.</para></footnote>. 
	The test files are shell scripts
	placed in
	<filename>debian/pbuilder-test/NN_name</filename> (where
	NN is number) following run-parts standard<footnote>
	  <para> See run-parts(8). For example, no '.' in file
	    names!
	  </para>
	</footnote>
	for file names.  After a successful build, packages are first
	tested for installation and removal, and then each test is ran
	inside the chroot.  The current directory is the top directory
	of the source-code.  This means you can expect to be able to
	use ./debian/ directory from inside your scripts.
      </para>
      <para>
	Example scripts for use with pbuilder-test can be found in 
	<filename>/usr/share/doc/pbuilder/examples/pbuilder-test</filename>
      </para>
    </sect1>
    <sect1 id="altcompiler">
      <title>Using pbuilder for testing builds with alternate compilers</title>
      <para>
	Most packages are compiled with <command>gcc</command>
	or <command>g++</command>
	and using the default compiler version, which was gcc 2.95 for Debian GNU/Linux 3.0 (i386).
	However, Debian 3.0 was distributed with other compilers, under package names
        such as <command>gcc-3.2</command> for gcc compiler
	version 3.2.
	It was therefore possible to try compiling packages against different
	compiler versions.
	<command>pentium-builder</command> provides an infrastructure for
	using a different compiler for building packages than the default gcc, by
	providing a wrapper script called gcc which calls the real gcc.
	To use <command>pentium-builder</command> in <command>pbuilder</command>, it is possible to set up the
	following in the configuration:
	<screen>
EXTRAPACKAGES="pentium-builder gcc-3.2 g++-3.2"
export DEBIAN_BUILDARCH=athlon
export DEBIAN_BUILDGCCVER=3.2</screen>
      </para>
      <para>
	It will instruct <command>pbuilder</command> to install the <command>pentium-builder</command> package
	and also the GCC 3.2 compiler packages inside the chroot,
	and set the environment variables required for
	<command>pentium-builder</command> to function.
      </para>
    </sect1>
  </chapter>
  <chapter id="pbuilder-uml">
    <title>Using User-mode-linux with pbuilder</title>
    <para>
      It is possible to use user-mode-linux by invoking
      <command>pbuilder-user-mode-linux</command> instead of
      <command>pbuilder</command>.
      <command>pbuilder-user-mode-linux</command> doesn't require root
      privileges, and it uses the copy-on-write (COW) disk access
      method of <command>User-mode-linux</command> which typically
      makes it much faster than the traditional
      <command>pbuilder</command>.
    </para>
    <para>
      <command>User-mode-linux</command> is a somewhat less proven
      platform than the standard Unix tools which
      <command>pbuilder</command> relies on
      (<command>chroot</command>, <command>tar</command>, and
      <command>gzip</command>) but mature enough to support
      <command>pbuilder-user-mode-linux</command> since its version
      0.59.  And since then,
      <command>pbuilder-user-mode-linux</command> has seen a rapid
      evolution.
    </para>
    <para>
      The configuration of <command>pbuilder-user-mode-linux</command>
      goes in three steps:
      <itemizedlist>
	<listitem>
	  <para>Configuration of user-mode-linux</para>
	</listitem>
	<listitem>
	  <para>Configuration of rootstrap</para>
	</listitem>
	<listitem>
	  <para>Configuration of pbuilder-uml</para>
	</listitem>
      </itemizedlist>
    </para>
    <sect1 id="user-mode-linux-config">
      <title>Configuring user-mode-linux</title>
      <para>
	user-mode-linux isn't completely trivial to set up.  It would
	probably be useful to acquaint yourself with it a bit before
	attempting to use <command>rootstrap</command> or
	<command>pbuilder-user-mode-linux</command>.  For details,
	read
	<filename>/usr/share/doc/uml-utilities/README.Debian</filename>
	and the <command>user-mode-linux</command> documentation.  (It's in a separate
	package, user-mode-linux-doc.)
      </para>
      <para>
	<command>user-mode-linux</command> requires
	the user to be in the uml-net group in order to configure the network
	unless you are using slirp.
      </para>
      <para>
	If you compile your own kernel, you may want to
	verify that you enable TUN/TAP support,
	and you might want to consider the SKAS patch.
      </para>
    </sect1>
    <sect1 id="rootstrap">
      <title>Configuring rootstrap</title>
      <para>
	<command>rootstrap</command>
	is a wrapper around debootstrap.
	It creates a Debian disk image for use with UML.
	To configure rootstrap, there are several requirements.
      </para>
      <itemizedlist>
	<listitem>
	  <para>Install the rootstrap package.</para>
	</listitem>
	<listitem>
	  <para>
	    TUN/TAP only:
	    add the user to the uml-net group to allow access to the network
	    <screen>adduser dancer uml-net</screen>
          </para>
	</listitem>
	<listitem>
	  <para>TUN/TAP only:
	    Check that the kernel supports the TUN/TAP interface,
	    or recompile the kernel if necessary.
	  </para>
	</listitem>
	<listitem>
	  <para>Set up <filename>/etc/rootstrap/rootstrap.conf</filename>.
	    For example,
	    if the current host is 192.168.1.2, changing following
	    entries to something like this seems to work.
	    <screen>
transport=tuntap
interface=eth0
gateway=192.168.1.1
mirror=http://192.168.1.2:8081/debian
host=192.168.1.198
uml=192.168.1.199
netmask=255.255.255.0</screen>
	    Some experimentation with configuration and running
	    <command>rootstrap ~/test.uml</command> to actually
	    test it would be handy.
	  </para>
	  <para>
	    Using slirp requires less configuration.
	    The default configuration comes with a working example.
	  </para>
	</listitem>
      </itemizedlist>
    </sect1>
    <sect1 id="pbuilderumlconfig">
      <title>Configuring pbuilder-uml</title>
      <para>
	The following needs to happen:
	<itemizedlist>
	  <listitem>
	    <para>Install the pbuilder-uml package.</para>
	  </listitem>
	  <listitem>
	    <para>
	      Set up the configuration file
	      <filename>/etc/pbuilder/pbuilder-uml.conf</filename>
	      in the following manner. It will be different for slirp.
	      <screen>
MY_ETH0=tuntap,,,192.168.1.198
UML_IP=192.168.1.199
UML_NETMASK=255.255.255.0
UML_NETWORK=192.168.1.0
UML_BROADCAST=255.255.255.255
UML_GATEWAY=192.168.1.1
PBUILDER_UML_IMAGE="/home/dancer/uml-image"</screen>
	      Also, it needs to match the rootstrap configuration.
	    </para>
	  </listitem>
	  <listitem>
	    <para>
	      Make sure BUILDPLACE is writable by the user.
	      Change BUILDPLACE in the configuration file to a place
	      where the user has access.
	    </para>
	  </listitem>
	  <listitem>
	    <para>Run <command>pbuilder-user-mode-linux <option>create --distribution sid</option></command> to create the image.</para>
	  </listitem>
	  <listitem>
	    <para>Try running <command>pbuilder-user-mode-linux build</command>.</para>
	  </listitem>
	</itemizedlist>
      </para>
    </sect1>
    <sect1 id="consideruml">
      <title>Considerations for running pbuilder-user-mode-linux</title>
      <para>
	<command>pbuilder-user-mode-linux</command> emulates most of <command>pbuilder</command>, but there
	are some differences.
      </para>
      <itemizedlist>
	<listitem>
	  <para>	
	    <command>pbuilder-user-mode-linux</command> does not support all options of <command>pbuilder</command>
	    properly yet. This is a problem, and will be addressed as
	    specific areas are discovered.
	  </para>
	</listitem>
	<listitem>
	  <para>
	    /tmp is handled differently inside
	    <command>pbuilder-user-mode-linux</command>.  In
	    <command>pbuilder-user-mode-linux</command>,
	    <filename>/tmp</filename> is mounted as tmpfs inside UML,
	    so accessing files under <filename>/tmp</filename> from
	    outside user-mode-linux does not work.  It affects options
	    like <command><option>--configfile</option></command>, and
	    when trying to build packages placed under
	    <filename>/tmp</filename>.
	  </para>
	</listitem>
      </itemizedlist>
    </sect1>
    <sect1 id="paralleluml">
      <title>Parallel running of pbuilder-user-mode-linux</title>
      <para>
	To run <command>pbuilder-user-mode-linux</command> in parallel
	on a system, there are a few things to bear in mind.
      </para>
      <itemizedlist>
	<listitem>
	  <para>The create and update methods must not be run when
	  a build is in progress, or the COW file will be invalidated.</para>
	</listitem>
	<listitem>
	  <para>
	    If you are not using slirp, user-mode-linux processes which are
	    running in parallel need to have different IP addresses.
	    Just trying to run the <command>pbuilder-user-mode-linux</command>
	    several times will result in failure to access the network.
	    But something like the following will work:
	    <screen>
for IP in 102 103 104 105; do
  xterm -e pbuilder-user-mode-linux build --uml-ip 192.168.0.$IP \
    20030107/whizzytex_1.1.1-1.dsc &amp;
done</screen>
	    When using slirp, this problem does not exist.
	  </para>
	</listitem>
      </itemizedlist>
    </sect1>
    <sect1 id="pbuilderumlwrap">
      <title>Using pbuilder-user-mode-linux as a wrapper script to start up a virtual machine</title>
      <para>
	It is possible to use
	<command>pbuilder-user-mode-linux</command> for other uses
	than just building Debian packages.
	<command>pbuilder-user-mode-linux
	<option>login</option></command> will let a user use a shell
	inside the user-mode-linux <command>pbuilder</command> base
	image, and <command>pbuilder-user-mode-linux
	<option>execute</option></command> will allow the user to
	execute a script inside the image.
      </para>
      <para>
	You can use the script to install ssh and add a new user,
	so that it is possible to access inside the user-mode-linux through ssh.
      </para>
      <para>
	Note that it is not possible to use a script from
	<filename>/tmp</filename> due to the way
	<command>pbuilder-user-mode-linux</command> mounts a tmpfs at
	<filename>/tmp</filename>.
      </para>
      <para>
	The following example script may be useful in starting a sshd
	inside user-mode-linux.
      </para>
      <screen>
#!/bin/bash

apt-get install -y ssh xbase-clients xterm
echo "enter root password"
passwd
cp /etc/ssh/sshd_config{,-}
sed 's/X11Forwarding.*/X11Forwarding yes/' /etc/ssh/sshd_config- &gt; /etc/ssh/sshd_config

/etc/init.d/ssh restart
ifconfig
echo "Hit enter to finish"
read</screen>
    </sect1>
  </chapter>
  <chapter id="faq">
    <title>Frequently asked questions </title>
    <!-- Start of FAQ/faq -->
    <para>
      Here, known problems and frequently asked questions are
      documented. This portion was initially available in README.Debian
      file, but moved here.
    </para>
    <sect1 id="pbuildercreatefail">
      <title>pbuilder create fails</title>
      <para>
	It often happens that <command>pbuilder</command> cannot create the latest chroot.
	Try upgrading <command>pbuilder</command> and debootstrap.
	It is currently only possible to create software that handles the
	past. Future prediction is a feature which may be added later after
	we have become comfortable with the past.
      </para>
      <para>
	There are people who occasionally back port debootstrap to stable
	versions; hunt for them.
      </para>
      <para>
	When there are errors with the debootstrap phase,
	the debootstrap script needs to be fixed.
	<command>pbuilder</command> does not provide a way to work around debootstrap.
      </para>
    </sect1>
    <sect1 id="bindmountlimits">
      <title>Directories that cannot be bind-mounted</title>
      <para>
	Because of the way <command>pbuilder</command> works, there
	are several directories which cannot be bind-mounted when
	running <command>pbuilder</command>.  The directories include
	<filename>/tmp</filename>,
	<filename>/var/cache/pbuilder</filename>, and system
	directories such as <filename>/etc</filename> and
	<filename>/usr</filename>.  The recommendation is to use
	directories under the user's home directory for bind-mounts.
      </para>
    </sect1>
    <sect1 id="shellafterfail">
      <title>Logging in to pbuilder to investigate build failure</title>
      <para>
	It is possible to invoke a shell session after a build
	failure.  Example hook script are provided as
	<filename>C10shell</filename> and
	<filename>C11screen</filename> scripts.  C10shell script will
	start bash inside chroot, and C11screen script will start GNU
	screen inside the chroot.
      </para>
    </sect1>
    <sect1 id="modifyupdate">
      <title>Logging in to pbuilder to modify the environment</title>
      <para>
	It is sometimes necessary to modify the chroot environment.
	<command>login</command> will remove the contents of the chroot after logout.
	It is possible to invoke a shell using hook scripts.
	<command>pbuilder update</command> executes 'E' scripts,
	and a sample for invoking a shell
	is provided as <filename>C10shell</filename>.
      </para>
      <screen>
$ mkdir ~/loginhooks
$ cp C10shell ~/loginhooks/E10shell
$ sudo pbuilder update --hookdir ~/loginhooks/E10shell</screen>
      <para>
	It is also possible to add <option>--save-after-exec</option>
	and/or <option>--save-after-login</option> options
	to the <command>pbuilder login</command> session
	to accomplish the goal.
	It is possible to add the <option>--uml-login-nocow</option> option
	to <command>pbuilder-user-mode-linux <option>login</option></command> session
	as well.
      </para>
    </sect1>
    <sect1 id="BUILDRESULTUID">
      <title>Setting BUILDRESULTUID for sudo sessions</title>
      <para>
	It is possible to set
	<screen>BUILDRESULTUID=$SUDO_UID</screen> in pbuilderrc to set
	the proper BUILDRESULTUID when using <command>sudo</command>.
      </para>
    </sect1>
    <sect1 id="tmpdir">
      <title>Notes on usage of $TMPDIR</title>
      <para>
	If you are setting $TMPDIR to an unusual value, of other than
	<filename>/tmp</filename>, you will find that some errors may occur inside the chroot,
	such as <command>dpkg-source</command> failing.
      </para>
      <para>There are two options, you may install a hook to create that
	directory, or set
	<screen>export TMPDIR=/tmp</screen>
	in pbuilderrc. Take your pick.
      </para>
      <para>
	An example script is provided as
	<filename>examples/D10tmp</filename> with <command>pbuilder</command>.
      </para>
    </sect1>
    <sect1 id="DISTRIBUTIONSWITCH">
      <title>Creating a shortcut for running <command>pbuilder</command> with a specific distribution</title>
      <para>
	When working with multiple chroots, it would be nice to work
	with scripts that reduce the amount of typing.  An example
	script <filename>pbuilder-distribution.sh</filename> is
	provided as an example.  Invoking the script as
	<filename>pbuilder-etch</filename> will invoke
	<command>pbuilder</command> with a etch chroot.
      </para>
    </sect1>
    <sect1 id="ENVVARDISTRIBUTIONSWITCH">
      <title>Using environmental variables for running <command>pbuilder</command>
	for specific distribution
      </title>
      <para>      This section<footnote>
	  <para>This part of the documentation contributed by Andres Mejia</para>
	  <para>
	    This example was taken from a wiki (<ulink url="https://wiki.ubuntu.com/PbuilderHowto">https://wiki.ubuntu.com/PbuilderHowto</ulink>).
      </para>

	</footnote>
	describes briefly a way to setup and use multiple pbuilder setups
	by creating a pbuilderrc configuration in your home path (<filename>$HOME/.pbuilderrc</filename>)
	and using the variable "DIST" when running pbuilder or pdebuild.
</para>
      <para>      First, setup <filename>$HOME/.pbuilderrc</filename> to look like:</para>
      <para>
	<screen>
if [ -n "${DIST}" ]; then
        BASETGZ="`dirname $BASETGZ`/$DIST-base.tgz"
        DISTRIBUTION="$DIST"
        BUILDRESULT="/var/cache/pbuilder/$DIST/result/"
        APTCACHE="/var/cache/pbuilder/$DIST/aptcache/"
fi
</screen></para>
      <para>Then, whenever you wish to use pbuilder for a particular distro, assign a value
to "DIST" that is one of the distros available for Debian or any Debian based
distro you happen to be running (i.e. whatever is found under
/usr/lib/debootstrap/scripts).
      </para>

      <para>Here's some examples on running pbuilder or pdebuild:
</para>
      <para><screen>
DIST=gutsy sudo pbuilder create

DIST=sid sudo pbuilder create --mirror http://http.us.debian.org/debian

DIST=gutsy sudo pbuilder create \
        --othermirror "deb http://archive.ubuntu.com/ubuntu gutsy universe \
        multiverse"

DIST=gutsy sudo pbuilder update

DIST=sid sudo pbuilder update --override-config --mirror \
http://http.us.debian.org/debian \
--othermirror "deb http://http.us.debian.org/debian sid contrib non-free"

DIST=gutsy pdebuild
</screen></para>
    </sect1>
    <sect1 id="usingspecialaptsources">
      <title>Using special apt sources lists, and local packages</title>
      <para>
	If you have some very specialized requirements on your
	apt setup inside <command>pbuilder</command>,
	it is possible to specify that through
	the <command><option>--othermirror</option></command>
	option.
	Try something like:
	<command><option>--othermirror "deb http://local/mirror stable main|deb-src http://local/source/repository ./"</option></command>
      </para>
      <para>
	To use the local file system instead of HTTP, it is necessary to do
	bind-mounting.
	<command><option>--bindmounts</option></command>
	is a command-line option useful for such cases.
      </para>
      <para>
	It might be convenient to use your built packages from inside the chroot.
	It is possible to automate the task with the following configuration.
	First, set up pbuilderrc to bindmount your build results directory.
      </para>
      <para>
	<screen>BINDMOUNTS="/var/cache/pbuilder/result"</screen>
      </para>
      <para>
	Then, add the following hook
      </para>
      <para>
	<screen>
# cat /var/cache/pbuilder/hooks/D70results
#!/bin/sh
cd /var/cache/pbuilder/result/
/usr/bin/dpkg-scanpackages . /dev/null &gt; /var/cache/pbuilder/result/Packages
/usr/bin/apt-get update</screen>
      </para>
      <para>
	This way, you can use <filename>deb file:/var/cache/pbuilder/result</filename>
      </para>
    </sect1>
    <sect1 id="apt-getupdateonbuild-depend">
      <title>How to get pbuilder to run apt-get update before trying to satisfy build-dependency</title>
      <para>
	You can use hook scripts for this.
	D scripts are run before satisfying build-dependency.
      </para>
      <para>
	<ulink url="http://lists.debian.org/debian-devel/2006/05/msg00550.html">
	  This snippet comes from Ondrej Sury.
	</ulink>
      </para>
    </sect1>
    <sect1 id="bashprompt">
      <title>Different bash prompts inside pbuilder login</title>
      <para>
	To make distinguishing bash prompts inside
	<command>pbuilder</command> easier, it is possible to set
	environment variables such as PS1 inside
	<filename>pbuilderrc</filename>
      </para>
      <para>
	With versions of bash more recent than 2.05b-2-15,
	the value of the debian_chroot variable, if set,
	is included in the value of PS1 (the Bash prompt)
	inside the chroot.
	In prior versions of bash,<footnote>
	  <para>Versions of bash from and before Debian 3.0</para>
	</footnote>
	setting PS1 in pbuilderrc worked.
      </para>
      <para>example of debian_chroot</para>
      <screen>
	export debian_chroot="pbuild$$"</screen>
      <para>example of PS1</para>
      <screen>
	export PS1="pbuild chroot 32165 # "</screen>
    </sect1>
    <sect1 id="chrootmemo">
      <title>Creating a chroot reminder</title>
      <para>
	Bash prompts will help you remember that you are inside a
	chroot.  There are other cases where you may want other signs
	of being inside a chroot.  Check out the
	<filename>examples/F90chrootmemo</filename> hook script.  It
	will create a file called <filename>/CHROOT</filename> inside
	your chroot. 
      </para>
    </sect1>
    <sect1 id="packagecachearchives">
      <title>Using /var/cache/apt/archives for the package cache</title>
      <para>
	For the help of low-bandwidth systems, it is possible to use
	<filename>/var/cache/apt/archives</filename> as the package
	cache.  Just specify it instead of the default
	<filename>/var/cache/pbuilder/aptcache</filename>.
      </para>
      <para>
	It is however not possible to do so currently with the
	user-mode-linux version of <command>pbuilder</command>,
	because <filename>/var/cache/apt/archives</filename> is
	usually only writable by root.
      </para>
      <para>
	Use of dedicated tools such as apt-proxy is recommended, since
	caching of packages would benefit the system outside the scope
	of <command>pbuilder</command>.
      </para>
    </sect1>
    <sect1 id="stablebackport">
      <title>pbuilder back ported to stable Debian releases</title>
      <para>
	Currently stable back port of pbuilder is available at backports.org.
      </para>
    </sect1>
    <sect1 id="LOGNAME">
      <title>Warning about LOGNAME not being defined</title>
      <para>
	You might see a lot of warning messages when running <command>pbuilder</command>.
      </para>
      <para>
	<screen>
	dpkg-genchanges: warning: no utmp entry available and LOGNAME not defined; using uid of process (1234)</screen>
      </para>
      <para>
	It is currently safe to ignore this warning message.  Please
	report back if you find any problem with having LOGNAME unset.
	Setting LOGNAME caused a few problems when invoking
	<command>chroot</command>. For example, dpkg requires getpwnam
	to succeed inside chroot, which means LOGNAME and the related
	user information have to be set up inside chroot.
      </para>
    </sect1>
    <sect1 id="nobuildconflictessential">
      <title>Cannot Build-conflict against an essential package</title>
      <para>
	<command>pbuilder</command> does not currently allow Build-Conflicts against
	essential packages.
	It should be obvious that essential packages should not be
	removed from a working Debian system, and a source
	package should not try to force removal of such packages
	on people building the package.
      </para>
    </sect1>
    <sect1 id="lninvalidcrossdevicelink">
      <title>Avoiding the "ln: Invalid cross-device link" message</title>
      <para>
	By default, <command>pbuilder</command> uses hard links to
	manage the <command>pbuilder</command> package cache.  It is
	not possible to make hard links across different devices; and
	thus this error will occur, depending on your set up.  If this
	happens, set <screen>APTCACHEHARDLINK=no</screen> in your
	pbuilderrc file. Note that packages in
	<command>APTCACHE</command> will be copied into chroot local
	cache, so plan for enough space on
	<command>BUILDPLACE</command> device.
      </para>
    </sect1>
    <sect1 id="fakechroot">
      <title>Using fakechroot</title>
      <para>
	It is possible to use <command>fakechroot</command> instead of
	being root to run <command>pbuilder</command>; however,
	several things make this impractical.
	<command>fakechroot</command> overrides library loads and
	tries to override default libc functions when providing the
	functionality of virtual <command>chroot</command>.  However,
	some binaries do no use libc to function, or override the
	overriding provided by <command>fakechroot</command>.  One
	example is <command>ldd</command>.  Inside
	<command>fakechroot</command>, <command>ldd</command> will
	check the library dependency outside of the chroot, which is
	not the expected behavior.
      </para>
      <para>
	To work around the problem, debootstrap has a
	<option>--variant fakechroot</option> option.  Use that, so
	that ldd and ldconfig are overridden.
      </para>
      <para>
	Make sure you have set your LD_PRELOAD path correctly, as described in
	the fakechroot manpage.
      </para>
    </sect1>
    <sect1 id="debconfinsidepbuilder">
      <title>Using debconf inside pbuilder sessions</title>
      <para>
	To use debconf inside <command>pbuilder</command>, setting DEBIAN_FRONTEND to
	<quote>readline</quote> in <filename>pbuilderrc</filename> should work.
	Setting it to <quote>dialog</quote> should also work, but make sure
	whiptail or dialog is installed inside the chroot.
      </para>
    </sect1>
    <sect1 id="nodev">
      <title>nodev mount options hinder pbuilder activity</title>
      <para>
	If you see messages such as this when building a chroot, you are mounting the file system with
	the nodev option.
      </para>
      <screen>
	/var/lib/dpkg/info/base-files.postinst: /dev/null: Permission denied</screen>
      <para>
	You will also have problems if you mount the file system with
	the noexec option, or nosuid.
	Make sure you do not have these flags set when mounting the file system for
	<filename>/var/cache/pbuilder</filename> or $BUILDPLACE.
      </para>
      <para>
	This is not a problem when using <command>user-mode-linux</command>.
      </para>
      <para>
	See <ulink url="http://bugs.debian.org/316135">
	  316135
	</ulink> for example.
      </para>
    </sect1>
    <sect1 id="faqslowpbuilder">
      <title>pbuilder is slow</title>
      <para>
	<command>pbuilder</command> is often slow. The slowest part of
	<command>pbuilder</command> is extracting the tar.gz every
	time <command>pbuilder</command> is invoked. That can be
	avoided by using <command>pbuilder-user-mode-linux</command>.
	<command>pbuilder-user-mode-linux</command> uses COW file
	system, and thus does not need to clean up and recreate the
	root file system.
      </para>
      <para>
	<command>pbuilder-user-mode-linux</command> is slower in
	executing the actual build system, due to the usual
	<command>user-mode-linux</command> overhead for system
	calls. It is more friendly to the hard drive.
      </para>
      <para>
	<command>pbuilder</command> with cowdancer is also an
	alternative that improves speed of pbuilder startup.
      </para>
    </sect1>
    <sect1 id="sponsor">
      <title>Using pdebuild to sponsor package</title>
      <para>
	To sign a package marking for sponsorship, it is possible to
	use<command><option> --auto-debsign</option></command> and
	<command><option>--debsign-k</option></command> options of
	<command>pdebuild</command>.
      </para>
      <screen>
	<command>pdebuild  <option>--auto-debsign </option> <option>--debsign-k </option><parameter>XXXXXXXX</parameter></command></screen>
    </sect1>
    <sect1 id="sourcechanges">
      <title>Why is there a source.changes file in ../?</title>
      <para>
	When running <command>pdebuild</command>, <command>pbuilder</command> will run dpkg-buildpackage to create a
	Debian source package to pass it on to <command>pbuilder</command>.
	File named XXXX_YYY_source.changes is what remains from that process.
	It is harmless unless you try to upload it to the Debian archive.
      </para>
      <para>
	This behavior is different when running through <option>--use-pdebuild-internal</option>
      </para>
    </sect1>
    <sect1 id="amd64i386">
      <title>amd64 and i386-mode</title>
      <para>
	amd64 architectures are capable of running binaries in i386
	mode.  It is possible to use <command>pbuilder</command> to
	run packages, using <command>linux32</command> and
	<command>debootstrap <option>--arch</option></command> option.
	Specifically, a command-line option like the following will
	work.
      </para>
      <para>
	<screen>
<command>pbuilder create --distribution sid --debootstrapopts --arch --debootstrapopts i386 \
  --basetgz /var/cache/pbuilder/base-i386.tgz --mirror http://ftp.jp.debian.org/debian</command>
<command>linux32 pbuilder build --basetgz /var/cache/pbuilder/base-i386.tgz</command></screen>
      </para>
    </sect1>
    <sect1 id="ccache">
      <title>How to use ccache</title>
      <para>
	To use <command>ccache</command> with
	<command>pbuilder</command>, use the following
	configuration.  Note that the directory used for CCACHE_DIR
	needs to exist, and be writable by user within <command>chroot</command>.  The
	default user within <command>chroot</command> is <screen>uid=1234</screen>.
      </para>
      <para>
	Example is provided as pbuilderrc.ccache.
      </para>
      <screen>
export CCACHE_DIR="/var/cache/pbuilder/ccache"
export PATH="/usr/lib/ccache:${PATH}"

EXTRAPACKAGES=ccache
BINDMOUNTS="${CCACHE_DIR}"</screen>
      <para>
	<ulink url="http://web.glandium.org/blog/?p=55">This entry created thanks to a blog posting.
	</ulink>
      </para>
    </sect1>
    <sect1 id="tmpfsforpbuilder">
      <title>Using tmpfs for buildplace</title>
      <para>
	To improve speed of operation, it is possible to use tmpfs for
	pbuilder build location.  Mount tmpfs to
	<filename>/var/cache/pbuilder/build</filename>, and set
	<screen>APTCACHEHARDLINK=no</screen>.
      </para>
    </sect1>
    <sect1>
      <title id="svnbuildpackage">Using svn-buildpackage together with pbuilder</title>
      <para>
	pdebuild command can be used with svn-buildpackage
	--svn-builder command-line option.
	<footnote>
	  <para><ulink url="http://upsilon.cc/~zack/blog/posts/2007/09/svn-cowbuilder/">
	      Zack has posted an example on his blog.
	    </ulink></para>
	</footnote>
      </para>
      <screen>
alias svn-cowbuilder="svn-buildpackage --svn-builder='pdebuild --pbuilder cowbuilder"</screen>
    </sect1>

    <!-- end of FAQ -->
  </chapter>

  <chapter id="develanddebug">
    <title>Troubleshooting and development</title>
    <sect1 id="bugreport">
      <title>Reporting bugs </title>
      <para>
	To report bugs, it would be important to have a log of what's
	going wrong.  Most of the time, adding a
	<command><option>--debug</option></command> option and
	re-running the session should do the trick.  Please send the
	log of such session along with your problem to ease the
	debugging process.
      </para>
    </sect1>
    <sect1 id="mailinglist">
      <title>Mailing list</title>
      <para>
	There is a mailing list for <command>pbuilder</command> on
	alioth (pbuilder-maint@lists.alioth.debian.org).  You can
	subscribe through the alioth web interface.
	<ulink url="http://alioth.debian.org/mail/?group_id=30778">
	  http://alioth.debian.org/mail/?group_id=30778</ulink>.
      </para>
    </sect1>
    <sect1 id="IRCchannel">
      <title>IRC Channel</title>
      <para>
	For coordination and communication,
	IRC channel #pbuilder on irc.oftc.net is used.
	Please log your intent there when you are going to 
	start doing some changes and committing some change.
      </para>
    </sect1>
    <sect1 id="development">
      <title>Information for pbuilder developers</title>
      <para>
	This section tries to document current development practices
	and how things generally operate in development.
      </para>
      <para>
	<command>pbuilder</command> is co-maintained with resources
	provided by Alioth.

	There is an Alioth project page at
	<ulink url="http://alioth.debian.org/projects/pbuilder">
	  http://alioth.debian.org/projects/pbuilder</ulink>.  
	Home page is also available, 
	at <ulink url="http://pbuilder.alioth.debian.org/">
	  http://alioth.debian.org/projects/pbuilder</ulink>
	which shows this text.
	git repository is available through http, git, or (if you have an
	account on alioth, ) ssh.
      </para>
      <screen>
git-clone git://git.debian.org/git/pbuilder/pbuilder.git
git-clone http://git.debian.org/git/pbuilder/pbuilder.git
git-clone ssh://git.debian.org/git/pbuilder/pbuilder.git</screen>
      <para>
	Test-suites are available in <filename>./testsuite/</filename> directory.
	Changes are expected not to break the test-suites.
	<filename>./run-test.sh</filename> is a basic test-suite, which puts a summary in 
	<filename>run-test.log</filename>, and <filename>run-test-cdebootstrap.log</filename>.
	<filename>./run-test-regression.sh</filename> is a regression test-suite,
	which puts the result in <filename>run-test-regression.log</filename>.
	Currently, run-test.sh is ran automatically daily to ensure that pbuilder is working.
      </para>
      <table id="dirtestsuites">
	<title>Directory structure of the testsuite</title>
	<tgroup cols="2">
	  <colspec colnum="1" colname="c1" colwidth="1*" align="left" />
	  <colspec colnum="2" colname="c2" colwidth="1*" align="left" />
	  <thead>
	    <row>
	      <entry>Directory</entry>
	      <entry>Meaning</entry>
	    </row>
	  </thead>
	  <tbody>
	    <row>
	      <entry><filename>./testsuite/</filename></entry>
	      <entry>Directory for testsuite</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/run-test.sh</filename></entry>
	      <entry>Daily regression test to test against Debian Archive changes breaking pbuilder.</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/run-test.log</filename></entry>
	      <entry>A summary of testsuite</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/normal/</filename></entry>
	      <entry>Directory for testsuite results of running pbuilder with debootstrap</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/cdebootstrap/</filename></entry>
	      <entry>Directory for testsuite results of running pbuilder with cdebootstrap</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/run-regression.sh</filename></entry>
	      <entry>Regression testsuite, ran every time change is made to pbuilder to make sure there is no regression.</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/run-regression.log</filename></entry>
	      <entry>Summary of test result</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/regression/BugID-*.sh</filename></entry>
	      <entry>Regression tests, exit 0 for success, exit 1 for failure</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/regression/BugID-*</filename></entry>
	      <entry>Files used for the regression testsuite.</entry>
	    </row>
	    <row>
	      <entry><filename>./testsuite/regression/log/BugID-*.sh.log</filename></entry>
	      <entry>Output of the regression test, output from the script is redirected by run-regression.sh</entry>
	    </row>
	  </tbody>
	</tgroup>
      </table>
      <para>
	When making changes, changes should be documented in the Git
	commit log.  git-dch will generate debian/changelog from the
	commit log. Make the first line of your commit log meaningful,
	and add any bug-closing information available.	
      </para>
      <para>
	A TODO file is available in <filename>debian/TODO</filename>.
	It's mostly not well-maintained, but hopefully it will be more
	up-to-date when people start using it.  emacs todoo-mode is
	used in editing the file.
      </para>
      <para>
	When releasing a new version of <command>pbuilder</command>,
	the version is tagged with the git tag
	X.XXX (version number).
	This is done with <command>./git-tag.sh</command> script available in the source tree.
      </para>
    </sect1>
  </chapter>
  <chapter id="otheruse">
    <title>Other uses of pbuilder</title>
    <sect1 id="chroot">
      <title>Using pbuilder for small experiments</title>
      <para>
	There are cases when some small experimenting is required, and
	you do not want to damage the main system,
	like when installing experimental library packages,
	or compiling with experimental compilers.
	For such cases, the <command>pbuilder login</command> command is available.
      </para>
      <para>
	<command>pbuilder login </command> is a debugging feature for
	<command>pbuilder</command> itself, but it also allows users to have a temporary chroot.
      </para>
      <para>
	Note that the chroot is cleaned after logging out of the shell,
	and mounting file systems inside it is considered harmful.
      </para>
    </sect1>
    <sect1 id="runningprograms">
      <title>Running little programs inside the chroot</title>
      <para>
	To facilitate using <command>pbuilder</command> for other uses,
	<command>pbuilder execute</command> is available.
	<command>pbuilder execute </command> will take a script
	specified in the command-line argument, and
	invoke the script inside the chroot.
      </para>
      <para>
	The script can be useful for sequences of operations such as
	installing ssh and adding a new user inside the chroot.
      </para>
    </sect1>
  </chapter>
  <chapter id="experimental">
    <title>Experimental or wish-list features of pbuilder</title>
    <para>
      There are some advanced features, above that of the
      basic feature of <command>pbuilder</command>, for some specific purposes.
    </para>
    <sect1 id="lvm">
      <title>Using LVM</title>
      <para>
	LVM2 has a useful snapshot function that features Copy-on-write images.
	That could be used for <command>pbuilder</command> just as it can be used for
	the user-mode-linux <command>pbuilder</command> port.
	lvmpbuilder script in the examples directory implements such port.
	The scripts and documentation can be found under 
	<filename>/usr/share/doc/pbuilder/examples/lvmpbuilder/</filename>
      </para>
    </sect1>
    <sect1 id="cowdancer">
      <title>Using cowdancer</title>
      <para>
	<command>cowdancer</command> allows copy-on-write semantics on
	file system using hard links and hard-link-breaking-on-write
	tricks.  <command>pbuilder</command> using
	<command>cowdancer</command> seems to be much faster and it is
	one ideal point for improvement.
	<command>cowbuilder</command>, a wrapper for
	<command>pbuilder</command> for using
	<command>cowdancer</command> is available from
	<command>cowdancer</command> package since 0.14
      </para>
      <para>
	Example command-lines for cowbuilder look like the following.
      </para>
      <para>
	<screen>
# cowbuilder --create --distribution sid
# cowbuilder --update --distribution sid
# cowbuilder --build XXX.dsc</screen>
      </para>
      <para>
	It is also possible to use cowdancer with pdebuild command.
	Specify with command-line option <option>--pbuilder</option>
	or set it in PDEBUILD_PBUILDER configuration option.
      </para>
      <para>
	<screen>
$ pdebuild --pbuilder cowbuilder</screen>
      </para>
      <sect2 id="sargecowdancer">
        <title>Using cowdancer for sarge</title>
	<para>
	  This section is mostly obsolete now that etch is released,
	  but left for reference, and will be removed after lenny
	  release.
	</para>
        <para>
          cowdancer was introduced after the release of Debian sarge;
          if you want to build packages for sarge with cowbuilder, you
          will need to workaround its unavailability.
        </para>
        <para>
          One way to workaround the problem is to set APTCONFDIR in pbuilderrc
          to point to a directory with a list of sources for APT which has both
          sarge and sarge-backports.
        </para>
        <para>
          <screen>
$ cat sources.list
# sarge-backports
deb     http://www.backports.org/debian sarge-backports main
deb-src http://www.backports.org/debian sarge-backports main

# sarge
deb     http://ftp.de.debian.org/debian sarge main
deb-src http://ftp.de.debian.org/debian sarge main</screen>
        </para>
        <para>
          It is recommended to "Pin" the cowdancer package appropriately in
          this case, via the APT preferences mechanism.
        </para>
        <para>
          <screen>
$ cat preferences
Explanation: use cowdancer from backports
Package: cowdancer
Pin: release a=sarge-backports
Pin-Priority: 950</screen>
        </para>
      </sect2>
    </sect1>
    <sect1 id="withouttargz">
      <title>Using pbuilder without tar.gz</title>
      <para>
	The <command><option>--no-targz</option></command>
	option of <command>pbuilder</command>
	will allow usage of <command>pbuilder</command> in a different way
	from conventional usage.
	It will try to use an existing chroot,
	and will not try to clean up after
	working on it.
	It is an operation mode more like
	<command>sbuild</command>.
      </para>
      <para>
	It should be possible to create base chroot images
	for <command>dchroot</command> with the following commands:
	<screen>
# pbuilder create --distribution etch --no-targz --basetgz /chroot/etch
# pbuilder create --distribution lenny --no-targz --basetgz /chroot/lenny
# pbuilder create --distribution sid --no-targz --basetgz /chroot/sid</screen>
      </para>
    </sect1>
    <sect1 id="inavserver">
      <title>Using pbuilder in a vserver</title>
      <para>
	It is possible to use <command>pbuilder</command> in a vserver
	environment.  This requires either vserver-patches in version 2.1.1-rc14
	or higher, or a Linux kernel version 2.6.16 or higher.
      </para>
      <para>
	To use <command>pbuilder</command> in a vserver, you need to set the
	<command>secure_mount</command> <command>CAPS</command> in the
	<command>ccapabilities</command> of this vserver.
      </para>
    </sect1>
  </chapter>
  <chapter id="refs">
    <title>Reference materials</title>
    <sect1 id="dirstructoutside">
      <title>Directory structure outside the chroot</title>
      <table>
	<title>Directory Structure outside the chroot </title>
	<tgroup cols="2">
	  <colspec colnum="1" colname="c1" colwidth="1*" align="left" />
	  <colspec colnum="2" colname="c2" colwidth="1*" align="left" />
	  <thead>
	    <row>
	      <entry>Directory</entry>
	      <entry>Meaning</entry>
	    </row>
	  </thead>
	  <tbody>
	    <row>
	      <entry><filename>/etc/pbuilderrc</filename></entry>
	      <entry>configuration file</entry>
	    </row>
	    <row>
	      <entry><filename>/usr/share/pbuilder/pbuilderrc</filename></entry>
	      <entry>Default configuration</entry>
	    </row>
	    <row>
	      <entry><filename>/var/cache/pbuilder/base.tgz</filename></entry>
	      <entry>Default location pbuilder uses for base.tgz, the tar-ball containing a basic Debian installation
	        with only the build-essential packages.
	      </entry>
	    </row>
	    <row>
	      <entry><filename>/var/cache/pbuilder/build/PID/</filename></entry>
	      <entry>Default location pbuilder uses for chroot</entry>
	    </row>
	    <row>
	      <entry><filename>/var/cache/pbuilder/aptcache</filename></entry>
	      <entry>Default location <command>pbuilder</command> will use as apt cache, to store deb packages required during <command>pbuilder</command> build.</entry>
	    </row>
	    <row>
	      <entry><filename>/var/cache/pbuilder/result</filename></entry>
	      <entry>Default location <command>pbuilder</command> puts the deb files and other files created after build</entry>
	    </row>
	    <row>
	      <entry><filename>/var/cache/pbuilder/pbuilder-umlresult</filename></entry>
	      <entry>Default location <command>pbuilder-user-mode-linux</command> puts the deb files and other files created after build </entry>
	    </row>
	    <row>
	      <entry><filename>/var/cache/pbuilder/pbuilder-mnt</filename></entry>
	      <entry>Default location <command>pbuilder-user-mode-linux</command> uses for mounting the COW file system, for chrooting.</entry>
	    </row>
	    <row>
	      <entry><filename>/tmp</filename></entry>
	      <entry><command>pbuilder-user-mode-linux</command> will mount tmpfs for work.</entry>
	    </row>
	    <row>
	      <entry><filename>${HOME}/tmp/PID.cow</filename></entry>
	      <entry><command>pbuilder-user-mode-linux</command> use this directory for location of COW file system.</entry>
	    </row>
	    <row>
	      <entry><filename>${HOME}/uml-image</filename></entry>
	      <entry><command>pbuilder-user-mode-linux</command> use this directory for user-mode-linux full disk image.</entry>
	    </row>
	  </tbody>
	</tgroup>
      </table>
    </sect1>
    <sect1 id="dirstructinside">
      <title>Directory structure inside the chroot</title>
      <table>
	<title>Directory Structure inside the chroot </title>
	<tgroup cols="2">
	  <colspec colnum="1" colname="c1" colwidth="1*" align="left" />
	  <colspec colnum="2" colname="c2" colwidth="1*" align="left" />
	  <thead>
	    <row>
	      <entry>Directory</entry>
	      <entry>Meaning</entry>
	    </row>
	  </thead>
	  <tbody>
	    <row>
	      <entry><filename>/etc/mtab</filename></entry>
	      <entry>
		symlink to <filename>/proc/mounts</filename>.
	      </entry>
	    </row>
	    <row>
	      <entry><filename>/tmp/buildd</filename></entry>
	      <entry>Default place used in <command>pbuilder</command>
	      to place the Debian package to be processed.
	      <filename>/tmp/buildd/packagename-version/</filename>
	      will be the root directory of the package being
	      processed.  HOME environment variable is set to this
	      value inside chroot by pbuilder-buildpackage
	      </entry>
	    </row>
	    <row>
	      <entry><filename>/run</filename></entry> 
	      <entry>The
	      script passed as an argument to
	      <command>pbuilder</command> execute is passed on.
	      </entry>
	    </row>
	    <row>
	      <entry><filename>/tmp/hooks</filename></entry>
	      <entry>
		The location of hooks.
	      </entry>
	    </row>
	    <row>
	      <entry><filename>/var/cache/apt/archives</filename></entry>
	      <entry>
		<command>pbuilder</command> copies the content of this directory to and from 
		the aptcache directory of outside chroot.
	      </entry>
	    </row>
	    <row>
	      <entry><filename>/tmp/XXXX</filename></entry>
	      <entry><command>pbuilder-user-mode-linux</command> uses
	      a script in <filename>/tmp</filename> to bootstrap into
	      user-mode-linux</entry>
	    </row>
	  </tbody>
	</tgroup>
      </table>
    </sect1>
  </chapter>
  <chapter>
    <title>Minor archaeological details</title>
    <sect1>
      <title>Documentation history </title>
      <para>
	This document was started on 28 Dec 2002 by
	Junichi Uekawa, trying to document what is known
	about <command>pbuilder</command>.
      </para>
      <para>
	This documentation is available from the <command>pbuilder</command> source tar-ball,
	and from the git repository of <command>pbuilder</command> (web-based access is possible).
	A copy of this documentation can be found on the
	<ulink url="http://pbuilder.alioth.debian.org/pbuilder-doc.html">Alioth project page for pbuilder</ulink>.
	<ulink url="http://pbuilder.alioth.debian.org/pbuilder-doc.pdf">There is also a PDF version</ulink>.
	The homepage for <command>pbuilder</command> is
	<ulink url="http://pbuilder.alioth.debian.org/">
	  http://pbuilder.alioth.debian.org/
	</ulink> hosted by alioth project.
      </para>
      <para>
	Documentation is written using DocBook XML, 
	with emacs PSGML mode, and using wysidocbookxml for live 
	previewing.
      </para>
    </sect1>
    <sect1 id="pbuilderbackgroundhistory">
      <title>Possibly inaccurate Background History of pbuilder</title>
      <para>
	The following is a most possibly inaccurate account of how
	<command>pbuilder</command> came to happen, and other attempts to
	make something like <command>pbuilder</command> happen.
	This part of the document was originally in the AUTHORS file,
	to give credit to those who existed before <command>pbuilder</command>.
      </para>
      <sect2>
	<title>The Time Before pbuilder</title>
	<para>
	  There was once dbuild, which was a shell script to build
	  Debian packages from source. Lars Wirzenius wrote that
	  script, and it was good, short, and simple (probably).
	  There was nothing like build-depends then (I think), and it was simple.
	  It could have been improved, I could only find references and no actual source.
	</para>
	<para>
	  debbuild was probably written by James Troup. I don't know it
	  because I have never seen the actual code, I could only find some
	  references to it on the net, and mailing list logs.
	</para>
	<para>
	  sbuild is a perl script to build Debian packages from source.
	  It parses Build-Depends, and performs other miscellaneous checks,
	  and has a lot of hacks to actually get things building,
	  including a table of what package to use when virtual packages are
	  specified (does it do that still?).
	  It supports the use of a local database for packages which do not
	  have build-dependencies. It was written by Ronan Hodek,
	  and I think it was patched and fixed and extended by
	  several people. It is part of wanna-build, and used extensively
	  in the Debian buildd system. I think it was maintained
	  mostly by Ryan Murray.
	</para>
      </sect2>
      <sect2 id="birth">
	<title>Birth of pbuilder</title>
	<para>
	  wanna-build (sbuild) was (at the time of year 2001) quite
	  difficult to set up, and it was never a Debian
	  package. dbuild was something that predated Build-Depends.
	</para>
	<para>
	  Building packages from source using Build-Depends
	  information within a chroot sounded trivial; and
	  <command>pbuilder</command> was born. It was initially a shell script
	  with only a few lines, which called debootstrap
	  and chroot and dpkg-buildpackage in the same run,
	  but soon, it was decided that that's too slow.
	</para>
	<para>
	  Yes, and it took almost an year to get things somewhat
	  right, and in the middle of the process, Debian 3.0
	  was released. Yay.
	  Debian 3.0 wasn't completely buildable with <command>pbuilder</command>,
	  but the amount of packages which are not buildable
	  is steadily decreasing (I hope).
	</para>
      </sect2>
      <sect2 id="secondyear">
	<title>And the second year of its life</title>
	<para>
	  Someone wanted <command>pbuilder</command> to not run as
	  root, and as User-mode-linux has become more useful as time
	  passed, I've started experimenting with
	  <command>pbuilder-user-mode-linux</command>.
	  <command>pbuilder-user-mode-linux</command> has not stayed
	  functional as much as I would have liked, and bootstrapping
	  <command>user-mode-linux</command> environment has been
	  pretty hard, due to the quality of user-mode-linux code or
	  packaging at that time, which kept on breaking network
	  support in one way or the other.
	</para>
      </sect2>
      <sect2 id="fifthyear">
	<title>Fifth year of pbuilder</title>
	<para>
	  <command>pbuilder</command> is now widely adopted as a 'almost standard' tool
	  for testing packages, and building packages in a pristine
	  environment.  There are other similar tools that do similar
	  tasks, but they do not share the exact same goal.  To
	  commemorate this fact, <command>pbuilder</command> is now co-maintained with
	  several people.
	</para>
	<para>
	  <command>sbuild</command> is now a well-maintained Debian package within
	  Debian, and with <command>pbuilder</command> being such a slow monster, some
	  people prefer the approach of sbuild.  Development to use
	  LVM-snapshots, cowloop, or cowdancer is hoped to improve the
	  situation somewhat.
	</para>
      </sect2>
    </sect1>
  </chapter>
</book>
<!--  LocalWords:  pbuilder xml Exp Junichi Uekawa chroot buildability sid HTTP
 -->
<!--  LocalWords:  buildable debootstrap pbuilderrc dist config dsc buildresult
 -->
<!--  LocalWords:  basetgz debian pdebuild debuild dpkg buildpackage cowdancer
 -->
<!--  LocalWords:  configfile sarge DEBOOTSTRAPOPTS cdebootstrap fakeroot linux
 -->
<!--  LocalWords:  BUILDUSERID BUILDUSERNAME fakerooting backporting postgresql
 -->
<!--  LocalWords:  gcc gcj javac pbuildd BTS GB installtest lintian linda pkg
 -->
<!--  LocalWords:  pentium EXTRAPACKAGES BUILDARCH athlon BUILDGCCVER uml gzip
 -->
<!--  LocalWords:  rootstrap slirp SKAS adduser tuntap eth netmask IP tmp tmpfs
 -->
<!--  LocalWords:  BUILDPLACE ip ssh sshd xbase passwd cp sed ifconfig README
 -->
<!--  LocalWords:  usr mkdir loginhooks sudo hookdir nocow BUILDRESULTUID UID
 -->
<!--  LocalWords:  TMPDIR chroots othermirror src bindmounts bindmount cd Sury
 -->
<!--  LocalWords:  Ondrej PS pbuild LOGNAME genchanges utmp uid ln fakechroot
 -->
<!--  LocalWords:  APTCACHEHARDLINK libc ldd ldconfig debconf FRONTEND readline
 -->
<!--  LocalWords:  whiptail nodev noexec nosuid gz chrootmemo debsign XXXXXXXX
 -->
<!--  LocalWords:  XXXX YYY amd debootstrapopts ccache DIR blog alioth IRC co
 -->
<!--  LocalWords:  CVS cvs ChangeLog changelog diff TODO todoo releaseX XXX LVM
 -->
<!--  LocalWords:  targz sbuild dchroot tgz chrooting symlink aptcache PDF Sep
 -->
<!--  LocalWords:  DocBook PSGML wysidocbookxml dbuild Wirzenius debbuild Troup
 -->
<!--  LocalWords:  perl Ronan Hodek buildd Yay cowloop buildplace
 -->