aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/guix.texi367
-rw-r--r--gnu/services/configuration.scm11
-rw-r--r--gnu/services/file-sharing.scm4
-rw-r--r--gnu/services/messaging.scm12
-rw-r--r--gnu/services/networking.scm6
-rw-r--r--gnu/services/telephony.scm6
-rw-r--r--tests/services/configuration.scm6
7 files changed, 102 insertions, 310 deletions
diff --git a/doc/guix.texi b/doc/guix.texi
index fc6f477c9a..9d17050ffc 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -19769,75 +19769,46 @@ The value of this service is a @code{opendht-configuration} object, as
described below.
@end defvr
-@deftp {Data Type} opendht-configuration
-This is the data type for the OpenDHT service configuration.
-
@c The fields documentation has been auto-generated using the
@c configuration->documentation procedure from
@c (gnu services configuration).
+@deftp {Data Type} opendht-configuration
Available @code{opendht-configuration} fields are:
-@deftypevr {@code{opendht-configuration} parameter} package opendht
+@table @asis
+@item @code{opendht} (default: @code{opendht}) (type: file-like)
The @code{opendht} package to use.
-@end deftypevr
-
-@deftypevr {@code{opendht-configuration} parameter} boolean peer-discovery?
+@item @code{peer-discovery?} (default: @code{#f}) (type: boolean)
Whether to enable the multicast local peer discovery mechanism.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{opendht-configuration} parameter} boolean enable-logging?
+@item @code{enable-logging?} (default: @code{#f}) (type: boolean)
Whether to enable logging messages to syslog. It is disabled by default
as it is rather verbose.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{opendht-configuration} parameter} boolean debug?
+@item @code{debug?} (default: @code{#f}) (type: boolean)
Whether to enable debug-level logging messages. This has no effect if
logging is disabled.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{opendht-configuration} parameter} maybe-string bootstrap-host
+@item @code{bootstrap-host} (default: @code{"bootstrap.jami.net:4222"}) (type: maybe-string)
The node host name that is used to make the first connection to the
network. A specific port value can be provided by appending the
@code{:PORT} suffix. By default, it uses the Jami bootstrap nodes, but
any host can be specified here. It's also possible to disable
-bootsrapping by explicitly setting this to the @code{*unspecified*}
-value.
+bootstrapping by explicitly setting this field to the
+@code{'unset} value.
-Defaults to @samp{"bootstrap.jami.net:4222"}.
-
-@end deftypevr
-
-@deftypevr {@code{opendht-configuration} parameter} maybe-number port
-The UDP port to bind to. When explicitly set to @code{*unspecified*},
-an available port is automatically selected.
-
-Defaults to @samp{4222}.
-
-@end deftypevr
+@item @code{port} (default: @code{4222}) (type: maybe-number)
+The UDP port to bind to. When left unspecified, an available port is
+automatically selected.
-@deftypevr {@code{opendht-configuration} parameter} maybe-number proxy-server-port
+@item @code{proxy-server-port} (type: maybe-number)
Spawn a proxy server listening on the specified port.
-Defaults to @samp{disabled}.
-
-@end deftypevr
-
-@deftypevr {@code{opendht-configuration} parameter} maybe-number proxy-server-port-tls
+@item @code{proxy-server-port-tls} (type: maybe-number)
Spawn a proxy server listening to TLS connections on the specified port.
-Defaults to @samp{disabled}.
-
-@end deftypevr
+@end table
@end deftp
@cindex Tor
@@ -30532,362 +30503,184 @@ Both can be run simultaneously.
@c %automatically generated documentation
+@deftp {Data Type} openvpn-client-configuration
Available @code{openvpn-client-configuration} fields are:
-@deftypevr {@code{openvpn-client-configuration} parameter} package openvpn
+@table @asis
+@item @code{openvpn} (default: @code{openvpn}) (type: file-like)
The OpenVPN package.
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} string pid-file
+@item @code{pid-file} (default: @code{"/var/run/openvpn/openvpn.pid"}) (type: string)
The OpenVPN pid file.
-Defaults to @samp{"/var/run/openvpn/openvpn.pid"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} proto proto
+@item @code{proto} (default: @code{udp}) (type: proto)
The protocol (UDP or TCP) used to open a channel between clients and
servers.
-Defaults to @samp{udp}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} dev dev
+@item @code{dev} (default: @code{tun}) (type: dev)
The device type used to represent the VPN connection.
-Defaults to @samp{tun}.
-
-@end deftypevr
-
-If you do not have some of these files (eg.@: you use a username and
-password), you can disable any of the following three fields by setting
-it to @code{*unspecified*}.
-
-@deftypevr {@code{openvpn-client-configuration} parameter} maybe-string ca
+@item @code{ca} (default: @code{"/etc/openvpn/ca.crt"}) (type: maybe-string)
The certificate authority to check connections against.
-Defaults to @samp{"/etc/openvpn/ca.crt"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} maybe-string cert
+@item @code{cert} (default: @code{"/etc/openvpn/client.crt"}) (type: maybe-string)
The certificate of the machine the daemon is running on. It should be
signed by the authority given in @code{ca}.
-Defaults to @samp{"/etc/openvpn/client.crt"}.
+@item @code{key} (default: @code{"/etc/openvpn/client.key"}) (type: maybe-string)
+The key of the machine the daemon is running on. It must be the key
+whose certificate is @code{cert}.
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} maybe-string key
-The key of the machine the daemon is running on. It must be the key whose
-certificate is @code{cert}.
-
-Defaults to @samp{"/etc/openvpn/client.key"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} boolean comp-lzo?
+@item @code{comp-lzo?} (default: @code{#t}) (type: boolean)
Whether to use the lzo compression algorithm.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} boolean persist-key?
+@item @code{persist-key?} (default: @code{#t}) (type: boolean)
Don't re-read key files across SIGUSR1 or --ping-restart.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} boolean persist-tun?
+@item @code{persist-tun?} (default: @code{#t}) (type: boolean)
Don't close and reopen TUN/TAP device or run up/down scripts across
SIGUSR1 or --ping-restart restarts.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} boolean fast-io?
+@item @code{fast-io?} (default: @code{#f}) (type: boolean)
(Experimental) Optimize TUN/TAP/UDP I/O writes by avoiding a call to
poll/epoll/select prior to the write operation.
-Defaults to @samp{#f}.
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} number verbosity
+@item @code{verbosity} (default: @code{3}) (type: number)
Verbosity level.
-Defaults to @samp{3}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} tls-auth-client tls-auth
+@item @code{tls-auth} (default: @code{#f}) (type: tls-auth-client)
Add an additional layer of HMAC authentication on top of the TLS control
channel to protect against DoS attacks.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} maybe-string auth-user-pass
+@item @code{auth-user-pass} (type: maybe-string)
Authenticate with server using username/password. The option is a file
-containing username/password on 2 lines. Do not use a file-like object as it
-would be added to the store and readable by any user.
+containing username/password on 2 lines. Do not use a file-like object
+as it would be added to the store and readable by any user.
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} key-usage verify-key-usage?
+@item @code{verify-key-usage?} (default: @code{#t}) (type: key-usage)
Whether to check the server certificate has server usage extension.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} bind bind?
+@item @code{bind?} (default: @code{#f}) (type: bind)
Bind to a specific local port number.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} resolv-retry resolv-retry?
+@item @code{resolv-retry?} (default: @code{#t}) (type: resolv-retry)
Retry resolving server address.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-client-configuration} parameter} openvpn-remote-list remote
+@item @code{remote} (default: @code{()}) (type: openvpn-remote-list)
A list of remote servers to connect to.
-Defaults to @samp{()}.
-
+@deftp {Data Type} openvpn-remote-configuration
Available @code{openvpn-remote-configuration} fields are:
-@deftypevr {@code{openvpn-remote-configuration} parameter} string name
+@table @asis
+@item @code{name} (default: @code{"my-server"}) (type: string)
Server name.
-Defaults to @samp{"my-server"}.
+@item @code{port} (default: @code{1194}) (type: number)
+Port number the server listens to.
-@end deftypevr
+@end table
-@deftypevr {@code{openvpn-remote-configuration} parameter} number port
-Port number the server listens to.
+@end deftp
-Defaults to @samp{1194}.
+@end table
-@end deftypevr
+@end deftp
-@end deftypevr
@c %end of automatic openvpn-client documentation
@c %automatically generated documentation
+@deftp {Data Type} openvpn-server-configuration
Available @code{openvpn-server-configuration} fields are:
-@deftypevr {@code{openvpn-server-configuration} parameter} package openvpn
+@table @asis
+@item @code{openvpn} (default: @code{openvpn}) (type: file-like)
The OpenVPN package.
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} string pid-file
+@item @code{pid-file} (default: @code{"/var/run/openvpn/openvpn.pid"}) (type: string)
The OpenVPN pid file.
-Defaults to @samp{"/var/run/openvpn/openvpn.pid"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} proto proto
+@item @code{proto} (default: @code{udp}) (type: proto)
The protocol (UDP or TCP) used to open a channel between clients and
servers.
-Defaults to @samp{udp}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} dev dev
+@item @code{dev} (default: @code{tun}) (type: dev)
The device type used to represent the VPN connection.
-Defaults to @samp{tun}.
-
-@end deftypevr
-
-If you do not have some of these files (eg.@: you use a username and
-password), you can disable any of the following three fields by setting
-it to @code{*unspecified*}.
-
-@deftypevr {@code{openvpn-server-configuration} parameter} maybe-string ca
+@item @code{ca} (default: @code{"/etc/openvpn/ca.crt"}) (type: maybe-string)
The certificate authority to check connections against.
-Defaults to @samp{"/etc/openvpn/ca.crt"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} maybe-string cert
+@item @code{cert} (default: @code{"/etc/openvpn/client.crt"}) (type: maybe-string)
The certificate of the machine the daemon is running on. It should be
signed by the authority given in @code{ca}.
-Defaults to @samp{"/etc/openvpn/client.crt"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} maybe-string key
-The key of the machine the daemon is running on. It must be the key whose
-certificate is @code{cert}.
-
-Defaults to @samp{"/etc/openvpn/client.key"}.
-
-@end deftypevr
+@item @code{key} (default: @code{"/etc/openvpn/client.key"}) (type: maybe-string)
+The key of the machine the daemon is running on. It must be the key
+whose certificate is @code{cert}.
-@deftypevr {@code{openvpn-server-configuration} parameter} boolean comp-lzo?
+@item @code{comp-lzo?} (default: @code{#t}) (type: boolean)
Whether to use the lzo compression algorithm.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} boolean persist-key?
+@item @code{persist-key?} (default: @code{#t}) (type: boolean)
Don't re-read key files across SIGUSR1 or --ping-restart.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} boolean persist-tun?
+@item @code{persist-tun?} (default: @code{#t}) (type: boolean)
Don't close and reopen TUN/TAP device or run up/down scripts across
SIGUSR1 or --ping-restart restarts.
-Defaults to @samp{#t}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} boolean fast-io?
+@item @code{fast-io?} (default: @code{#f}) (type: boolean)
(Experimental) Optimize TUN/TAP/UDP I/O writes by avoiding a call to
poll/epoll/select prior to the write operation.
-Defaults to @samp{#f}.
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} number verbosity
+@item @code{verbosity} (default: @code{3}) (type: number)
Verbosity level.
-Defaults to @samp{3}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} tls-auth-server tls-auth
+@item @code{tls-auth} (default: @code{#f}) (type: tls-auth-server)
Add an additional layer of HMAC authentication on top of the TLS control
channel to protect against DoS attacks.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} number port
+@item @code{port} (default: @code{1194}) (type: number)
Specifies the port number on which the server listens.
-Defaults to @samp{1194}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} ip-mask server
+@item @code{server} (default: @code{"10.8.0.0 255.255.255.0"}) (type: ip-mask)
An ip and mask specifying the subnet inside the virtual network.
-Defaults to @samp{"10.8.0.0 255.255.255.0"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} cidr6 server-ipv6
+@item @code{server-ipv6} (default: @code{#f}) (type: cidr6)
A CIDR notation specifying the IPv6 subnet inside the virtual network.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} string dh
+@item @code{dh} (default: @code{"/etc/openvpn/dh2048.pem"}) (type: string)
The Diffie-Hellman parameters file.
-Defaults to @samp{"/etc/openvpn/dh2048.pem"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} string ifconfig-pool-persist
+@item @code{ifconfig-pool-persist} (default: @code{"/etc/openvpn/ipp.txt"}) (type: string)
The file that records client IPs.
-Defaults to @samp{"/etc/openvpn/ipp.txt"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} gateway redirect-gateway?
+@item @code{redirect-gateway?} (default: @code{#f}) (type: gateway)
When true, the server will act as a gateway for its clients.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} boolean client-to-client?
+@item @code{client-to-client?} (default: @code{#f}) (type: boolean)
When true, clients are allowed to talk to each other inside the VPN.
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} keepalive keepalive
+@item @code{keepalive} (default: @code{(10 120)}) (type: keepalive)
Causes ping-like messages to be sent back and forth over the link so
that each side knows when the other side has gone down. @code{keepalive}
requires a pair. The first element is the period of the ping sending,
and the second element is the timeout before considering the other side
down.
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} number max-clients
+@item @code{max-clients} (default: @code{100}) (type: number)
The maximum number of clients.
-Defaults to @samp{100}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} string status
+@item @code{status} (default: @code{"/var/run/openvpn/status"}) (type: string)
The status file. This file shows a small report on current connection.
It is truncated and rewritten every minute.
-Defaults to @samp{"/var/run/openvpn/status"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-server-configuration} parameter} openvpn-ccd-list client-config-dir
+@item @code{client-config-dir} (default: @code{()}) (type: openvpn-ccd-list)
The list of configuration for some clients.
-Defaults to @samp{()}.
-
-Available @code{openvpn-ccd-configuration} fields are:
-
-@deftypevr {@code{openvpn-ccd-configuration} parameter} string name
-Client name.
-
-Defaults to @samp{"client"}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-ccd-configuration} parameter} ip-mask iroute
-Client own network
-
-Defaults to @samp{#f}.
-
-@end deftypevr
-
-@deftypevr {@code{openvpn-ccd-configuration} parameter} ip-mask ifconfig-push
-Client VPN IP.
-
-Defaults to @samp{#f}.
-
-@end deftypevr
+@end table
-@end deftypevr
+@end deftp
@c %end of automatic openvpn-server documentation
@@ -31519,7 +31312,7 @@ Each parameter definition is preceded by its type; for example,
@samp{boolean foo} indicates that the @code{foo} parameter should be
specified as a boolean. Types starting with @code{maybe-} denote
parameters that won't show up in TLP config file when their value is
-left unset, or is explicitly set to the @code{*unspecified*} value.
+left unset, or is explicitly set to the @code{'unset} value.
@c The following documentation was initially generated by
@c (generate-tlp-documentation) in (gnu services pm). Manually maintained
@@ -39136,7 +38929,7 @@ macro which is a shorthand of this.
Sometimes a field should not be serialized if the user doesn’t specify a
value. To achieve this, you can use the @code{define-maybe} macro to
define a ``maybe type''; if the value of a maybe type is left unset, or
-is set to the @code{*unspecified*} value, then it will not be
+is set to the @code{'unset} value, then it will not be
serialized.
When defining a ``maybe type'', the corresponding serializer for the
diff --git a/gnu/services/configuration.scm b/gnu/services/configuration.scm
index e3c101d042..3007e8de35 100644
--- a/gnu/services/configuration.scm
+++ b/gnu/services/configuration.scm
@@ -3,7 +3,7 @@
;;; Copyright © 2017 Mathieu Othacehe <m.othacehe@gmail.com>
;;; Copyright © 2017, 2018 Clément Lassieur <clement@lassieur.org>
;;; Copyright © 2021 Xinglu Chen <public@yoctocell.xyz>
-;;; Copyright © 2021 Maxim Cournoyer <maxim.cournoyer@gmail.com>
+;;; Copyright © 2021, 2022 Maxim Cournoyer <maxim.cournoyer@gmail.com>
;;; Copyright © 2021 Andrew Tropin <andrew@trop.in>
;;; Copyright © 2022 Maxime Devos <maximedevos@telenet.be>
;;;
@@ -142,8 +142,7 @@ does not have a default value" field kind)))
(id #'stem #'serialize-maybe- #'stem))))
#`(begin
(define (maybe-stem? val)
- (or (unspecified? val)
- (stem? val)))
+ (or (eq? val 'unset) (stem? val)))
#,@(if serialize?
(list #'(define (serialize-maybe-stem field-name val)
(if (stem? val)
@@ -171,10 +170,10 @@ does not have a default value" field kind)))
(values #'(field-type def)))
((field-type)
(identifier? #'field-type)
- (values #'(field-type *unspecified*)))
+ (values #'(field-type 'unset)))
(field-type
(identifier? #'field-type)
- (values #'(field-type *unspecified*)))))
+ (values #'(field-type 'unset)))))
(define (define-configuration-helper serialize? serializer-prefix syn)
(syntax-case syn ()
@@ -262,7 +261,7 @@ does not have a default value" field kind)))
(lambda ()
(display '#,(id #'stem #'% #'stem))
(if (eq? (syntax->datum field-default)
- '*unspecified*)
+ 'unset)
(configuration-missing-default-value
'#,(id #'stem #'% #'stem) 'field)
field-default)))
diff --git a/gnu/services/file-sharing.scm b/gnu/services/file-sharing.scm
index e32d1f145d..5df8b0d597 100644
--- a/gnu/services/file-sharing.scm
+++ b/gnu/services/file-sharing.scm
@@ -115,7 +115,7 @@ type generated and used by Transmission clients, suitable for passing to the
(set! serialize-maybe-string
(lambda (field-name val)
(serialize-string field-name
- (if (unspecified? val)
+ (if (eq? val 'unset)
""
val))))
@@ -180,7 +180,7 @@ type generated and used by Transmission clients, suitable for passing to the
(define-maybe file-object)
(set! serialize-maybe-file-object
(lambda (field-name val)
- (if (unspecified? val)
+ (if (eq? val 'unset)
(serialize-string field-name "")
(serialize-file-object field-name val))))
diff --git a/gnu/services/messaging.scm b/gnu/services/messaging.scm
index 651f90adb2..00a1c80a14 100644
--- a/gnu/services/messaging.scm
+++ b/gnu/services/messaging.scm
@@ -90,7 +90,7 @@
((new-def ...)
(map (lambda (def target)
(if (eq? 'common (syntax->datum target))
- #'*unspecified* def))
+ #''unset def))
#'(def ...) #'(target ...)))
((new-doc ...)
(map (lambda (doc target)
@@ -200,7 +200,7 @@
(define-maybe file-object-list)
(define (raw-content? val)
- (not (unspecified? val)))
+ (not (eq? val 'unset)))
(define (serialize-raw-content field-name val)
val)
(define-maybe raw-content)
@@ -474,12 +474,12 @@ by the Prosody service. See @url{https://prosody.im/doc/logging}."
global)
(http-max-content-size
- (maybe-non-negative-integer *unspecified*)
+ (maybe-non-negative-integer 'unset)
"Maximum allowed size of the HTTP body (in bytes)."
common)
(http-external-url
- (maybe-string *unspecified*)
+ (maybe-string 'unset)
"Some modules expose their own URL in various ways. This URL is built
from the protocol, host and port used. If Prosody sits behind a proxy, the
public URL will be @code{http-external-url} instead. See
@@ -556,7 +556,7 @@ support. To add an external component, you simply fill the hostname field. See
int-component)
(mod-muc
- (maybe-mod-muc-configuration *unspecified*)
+ (maybe-mod-muc-configuration 'unset)
"Multi-user chat (MUC) is Prosody's module for allowing you to create
hosted chatrooms/conferences for XMPP users.
@@ -573,7 +573,7 @@ See also @url{https://prosody.im/doc/modules/mod_muc}."
ext-component)
(raw-content
- (maybe-raw-content *unspecified*)
+ (maybe-raw-content 'unset)
"Raw content that will be added to the configuration file."
common)))
diff --git a/gnu/services/networking.scm b/gnu/services/networking.scm
index 3ddcdcc251..3c6395b6ca 100644
--- a/gnu/services/networking.scm
+++ b/gnu/services/networking.scm
@@ -772,11 +772,11 @@ logging is disabled.")
network. A specific port value can be provided by appending the @code{:PORT}
suffix. By default, it uses the Jami bootstrap nodes, but any host can be
specified here. It's also possible to disable bootstrapping by explicitly
-setting this field to the @code{*unspecified*} value.")
+setting this field to the @code{'unset} value.")
(port
(maybe-number 4222)
- "The UDP port to bind to. When set to @code{*unspecified*}, an available
-port is automatically selected.")
+ "The UDP port to bind to. When left unspecified, an available port is
+automatically selected.")
(proxy-server-port
maybe-number
"Spawn a proxy server listening on the specified port.")
diff --git a/gnu/services/telephony.scm b/gnu/services/telephony.scm
index e8bfbc88c5..7152f3b38d 100644
--- a/gnu/services/telephony.scm
+++ b/gnu/services/telephony.scm
@@ -307,7 +307,7 @@ CONFIG, a <jami-configuration> object."
(dbus (jami-configuration-dbus config))
(dbus-daemon (file-append dbus "/bin/dbus-daemon"))
(accounts (jami-configuration-accounts config))
- (declarative-mode? (not (unspecified? accounts))))
+ (declarative-mode? (not (eq? 'unset accounts))))
(with-extensions (list guile-packrat ;used by guile-ac-d-bus
guile-ac-d-bus
@@ -649,7 +649,7 @@ argument, either a registered username or the fingerprint of the account.")
account-details)
(let ((username (archive-name->username
archive)))
- (when (not (unspecified? allowed-contacts))
+ (when (not (eq? 'unset allowed-contacts))
;; Reject calls from unknown contacts.
(set-account-details
'(("DHT.PublicInCalls" . "false")) username)
@@ -659,7 +659,7 @@ argument, either a registered username or the fingerprint of the account.")
;; Add allowed ones.
(for-each (cut add-contact <> username)
allowed-contacts))
- (when (not (unspecified? moderators))
+ (when (not (eq? 'unset moderators))
;; Disable the 'AllModerators' property.
(set-all-moderators #f username)
;; Remove all moderators.
diff --git a/tests/services/configuration.scm b/tests/services/configuration.scm
index 6268525317..548c400bfe 100644
--- a/tests/services/configuration.scm
+++ b/tests/services/configuration.scm
@@ -151,9 +151,9 @@
(not (defined? 'serialize-maybe-string)))
(test-assert "maybe type, no default"
- (unspecified?
- (config-with-maybe-string/no-serialization-name
- (config-with-maybe-string/no-serialization))))
+ (eq? 'unset
+ (config-with-maybe-string/no-serialization-name
+ (config-with-maybe-string/no-serialization))))
(test-assert "maybe type, with default"
(equal?