aboutsummaryrefslogtreecommitdiff
path: root/doc/guix.texi
diff options
context:
space:
mode:
authorLudovic Courtès <ludo@gnu.org>2019-01-20 22:12:10 +0100
committerLudovic Courtès <ludo@gnu.org>2019-01-20 22:12:10 +0100
commit3e2d4e69c340c3520f546f8c7e21e52383058d1c (patch)
tree0bc92edb753cfdf9a9e7ef763ebc19f0cd2d528c /doc/guix.texi
parentad79ae7e2d7505292b11e87302b08f4db0f934e9 (diff)
parente5ad2cdf172eecc7edef37a500593b1941af013c (diff)
downloadguix-3e2d4e69c340c3520f546f8c7e21e52383058d1c.tar
guix-3e2d4e69c340c3520f546f8c7e21e52383058d1c.tar.gz
Merge branch 'master' into staging
Diffstat (limited to 'doc/guix.texi')
-rw-r--r--doc/guix.texi116
1 files changed, 81 insertions, 35 deletions
diff --git a/doc/guix.texi b/doc/guix.texi
index 34d0bf32fa..d6148757fe 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -9328,12 +9328,20 @@ GuixSD in a virtual machine (VM).
@subsection Preparing for Installation
Once you have successfully booted your computer using the installation medium,
-you should end up with a root prompt. Several console TTYs are configured
-and can be used to run commands as root. TTY2 shows this documentation,
-browsable using the Info reader commands (@pxref{Top,,, info-stnd,
-Stand-alone GNU Info}). The installation system runs the GPM mouse
-daemon, which allows you to select text with the left mouse button and
-to paste it with the middle button.
+you should end up with the welcome page of the graphical installer. The
+graphical installer is a text-based user interface built upon the newt
+library. It shall guide you through all the different steps needed to install
+GNU GuixSD. However, as the graphical installer is still under heavy
+development, you might want to fallback to the original, shell based install
+process, by switching to TTYs 3 to 6 with the shortcuts CTRL-ALT-F[3-6]. The
+following sections describe the installation procedure assuming you're using
+one of those TTYs. They are configured and can be used to run commands as
+root.
+
+TTY2 shows this documentation, browsable using the Info reader commands
+(@pxref{Top,,, info-stnd, Stand-alone GNU Info}). The installation system
+runs the GPM mouse daemon, which allows you to select text with the left mouse
+button and to paste it with the middle button.
@quotation Note
Installation requires access to the Internet so that any missing
@@ -9660,12 +9668,12 @@ unless your configuration specifies otherwise
(@pxref{user-account-password, user account passwords}).
@cindex upgrading GuixSD
-From then on, you can update GuixSD whenever you want by running
-@command{guix pull} as @code{root} (@pxref{Invoking guix pull}), and
-then running @command{guix system reconfigure} to build a new system
-generation with the latest packages and services (@pxref{Invoking guix
-system}). We recommend doing that regularly so that your system
-includes the latest security updates (@pxref{Security Updates}).
+From then on, you can update GuixSD whenever you want by running @command{guix
+pull} as @code{root} (@pxref{Invoking guix pull}), and then running
+@command{guix system reconfigure /etc/config.scm}, as @code{root} too, to
+build a new system generation with the latest packages and services
+(@pxref{Invoking guix system}). We recommend doing that regularly so that
+your system includes the latest security updates (@pxref{Security Updates}).
Join us on @code{#guix} on the Freenode IRC network or on
@email{guix-devel@@gnu.org} to share your experience---good or not so
@@ -10848,7 +10856,9 @@ system, you will want to append services to @var{%base-services}, like
this:
@example
-(cons* (avahi-service) (lsh-service) %base-services)
+(cons* (service avahi-service-type)
+ (service openssh-service-type)
+ %base-services)
@end example
@end defvr
@@ -12634,6 +12644,19 @@ This is a symbol specifying the logging level: @code{quiet}, @code{fatal},
@code{error}, @code{info}, @code{verbose}, @code{debug}, etc. See the man
page for @file{sshd_config} for the full list of level names.
+@item @code{extra-content} (default: @code{""})
+This field can be used to append arbitrary text to the configuration file. It
+is especially useful for elaborate configurations that cannot be expressed
+otherwise. This configuration, for example, would generally disable root
+logins, but permit them from one specific IP address:
+
+@example
+(openssh-configuration
+ (extra-content "\
+Match Address 192.168.0.1
+ PermitRootLogin yes"))
+@end example
+
@end table
@end deftp
@@ -12709,31 +12732,54 @@ browsers, from accessing Facebook.
The @code{(gnu services avahi)} provides the following definition.
-@deffn {Scheme Procedure} avahi-service [#:avahi @var{avahi}] @
- [#:host-name #f] [#:publish? #t] [#:ipv4? #t] @
- [#:ipv6? #t] [#:wide-area? #f] @
- [#:domains-to-browse '()] [#:debug? #f]
-Return a service that runs @command{avahi-daemon}, a system-wide
+@defvr {Scheme Variable} avahi-service-type
+This is the service that runs @command{avahi-daemon}, a system-wide
mDNS/DNS-SD responder that allows for service discovery and
-"zero-configuration" host name lookups (see @uref{http://avahi.org/}), and
-extends the name service cache daemon (nscd) so that it can resolve
-@code{.local} host names using
-@uref{http://0pointer.de/lennart/projects/nss-mdns/, nss-mdns}. Additionally,
-add the @var{avahi} package to the system profile so that commands such as
-@command{avahi-browse} are directly usable.
-
-If @var{host-name} is different from @code{#f}, use that as the host name to
+``zero-configuration'' host name lookups (see @uref{http://avahi.org/}).
+Its value must be a @code{zero-configuration} record---see below.
+
+This service extends the name service cache daemon (nscd) so that it can
+resolve @code{.local} host names using
+@uref{http://0pointer.de/lennart/projects/nss-mdns/, nss-mdns}. @xref{Name
+Service Switch}, for information on host name resolution.
+
+Additionally, add the @var{avahi} package to the system profile so that
+commands such as @command{avahi-browse} are directly usable.
+@end defvr
+
+@deftp {Data Type} avahi-configuration
+Data type representation the configuration for Avahi.
+
+@table @asis
+
+@item @code{host-name} (default: @code{#f})
+If different from @code{#f}, use that as the host name to
publish for this machine; otherwise, use the machine's actual host name.
-When @var{publish?} is true, publishing of host names and services is allowed;
-in particular, avahi-daemon will publish the machine's host name and IP
-address via mDNS on the local network.
+@item @code{publish?} (default: @code{#t})
+When true, allow host names and services to be published (broadcast) over the
+network.
-When @var{wide-area?} is true, DNS-SD over unicast DNS is enabled.
+@item @code{publish-workstation?} (default: @code{#t})
+When true, @command{avahi-daemon} publishes the machine's host name and IP
+address via mDNS on the local network. To view the host names published on
+your local network, you can run:
-Boolean values @var{ipv4?} and @var{ipv6?} determine whether to use IPv4/IPv6
-sockets.
-@end deffn
+@example
+avahi-browse _workstation._tcp
+@end example
+
+@item @code{wide-area?} (default: @code{#f})
+When true, DNS-SD over unicast DNS is enabled.
+
+@item @code{ipv4?} (default: @code{#t})
+@itemx @code{ipv6?} (default: @code{#t})
+These fields determine whether to use IPv4/IPv6 sockets.
+
+@item @code{domains-to-browse} (default: @code{'()})
+This is a list of domains to browse.
+@end table
+@end deftp
@deffn {Scheme Variable} openvswitch-service-type
This is the type of the @uref{http://www.openvswitch.org, Open vSwitch}
@@ -22339,8 +22385,8 @@ want is to have @code{.local} host lookup working.
Note that, in this case, in addition to setting the
@code{name-service-switch} of the @code{operating-system} declaration,
-you also need to use @code{avahi-service} (@pxref{Networking Services,
-@code{avahi-service}}), or @var{%desktop-services}, which includes it
+you also need to use @code{avahi-service-type} (@pxref{Networking Services,
+@code{avahi-service-type}}), or @var{%desktop-services}, which includes it
(@pxref{Desktop Services}). Doing this makes @code{nss-mdns} accessible
to the name service cache daemon (@pxref{Base Services,
@code{nscd-service}}).