/* Copyright 2004 Roger Dingledine, Nick Mathewson. */
/* See LICENSE for licensing information */
/* $Id$ */

/**
 * \file hibernate.c
 * \brief Functions to close listeners, stop allowing new circuits,
 * etc in preparation for closing down or going dormant; and to track
 * bandwidth and time intervals to know when to hibernate and when to
 * stop hibernating.
 **/

/*
hibernating, phase 1:
  - send destroy in response to create cells
  - send end (policy failed) in response to begin cells
  - close an OR conn when it has no circuits

hibernating, phase 2:
  (entered when bandwidth hard limit reached)
  - close all OR/AP/exit conns)
*/

#include "or.h"

#define HIBERNATE_STATE_LIVE 1
#define HIBERNATE_STATE_EXITING 2
#define HIBERNATE_STATE_LOWBANDWIDTH 3
#define HIBERNATE_STATE_DORMANT 4

#define SHUTDOWN_WAIT_LENGTH 30 /* seconds */

static int hibernate_state = HIBERNATE_STATE_LIVE;
/** If are hibernating, when do we plan to wake up? Set to 0 if we
 * aren't hibernating. */
static time_t hibernate_end_time = 0;

/* Fields for accounting logic.  Accounting overview:
 *
 * Accounting is designed to ensure that no more than N bytes are sent
 * in either direction over a given interval (currently, one month,
 * starting at 0:00 GMT an arbitrary day within the month).  We could
 * try to do this by choking our bandwidth to a trickle, but that
 * would make our streams useless.  Instead, we estimate what our
 * bandwidth usage will be, and guess how long we'll be able to
 * provide that much bandwidth before hitting our limit.  We then
 * choose a random time within the accounting interval to come up (so
 * that we don't get 50 Tors running on the 1st of the month and none
 * on the 30th).
 *
 * Each interval runs as follows:
 *
 * 1. We guess our bandwidth usage, based on how much we used
 *     last time.  We choose a "wakeup time" within the interval to come up.
 * 2. Until the chosen wakeup time, we hibernate.
 * 3. We come up at the wakeup time, and provide bandwidth until we are
 *    "very close" to running out.
 * 4. Then we go into low-bandwidth mode, and stop accepting new
 *    connections, but provide bandwidth until we run out.
 * 5. Then we hibernate until the end of the interval.
 *
 * If the interval ends before we run out of bandwdith, we go back to
 * step one.
 */

/** How many bytes have we read/written in this accounting interval? */
static uint64_t n_bytes_read_in_interval = 0;
static uint64_t n_bytes_written_in_interval = 0;
/** How many seconds have we been running this interval? */
static uint32_t n_seconds_active_in_interval = 0;
/** When did this accounting interval start? */
static time_t interval_start_time = 0;
/** When will this accounting interval end? */
static time_t interval_end_time = 0;
/** How far into the accounting interval should we hibernate? */
static time_t interval_wakeup_time = 0;
/** How much bandwidth do we 'expect' to use per minute? */
static uint32_t expected_bandwidth_usage = 0;

static void reset_accounting(time_t now);
static int read_bandwidth_usage(void);
static int record_bandwidth_usage(time_t now);
static time_t start_of_accounting_period_after(time_t now);
static time_t start_of_accounting_period_containing(time_t now);
static void accounting_set_wakeup_time(void);

/* ************
 * Functions for bandwidth accounting.
 * ************/

/** Called from main.c to tell us that <b>seconds</b> seconds have
 * passed, <b>n_read</b> bytes have been read, and <b>n_written</b>
 * bytes have been written. */
void
accounting_add_bytes(size_t n_read, size_t n_written, int seconds)
{
  n_bytes_read_in_interval += n_read;
  n_bytes_written_in_interval += n_written;
  /* If we haven't been called in 10 seconds, we're probably jumping
   * around in time. */
  n_seconds_active_in_interval += (seconds < 10) ? seconds : 0;
}

/** Increment the month field of <b>tm</b> by <b>delta</b> months. */
static INLINE void
incr_month(struct tm *tm, unsigned int delta)
{
  tm->tm_mon += delta;
  /* officially, we don't have to do this, but some platforms are rumored
   * to have broken implementations. */
  while (tm->tm_mon > 11) {
    ++tm->tm_year;
    tm->tm_mon -= 12;
  }
}

/** Decrement the month field of <b>tm</b> by <b>delta</b> months. */
static INLINE void
decr_month(struct tm *tm, unsigned int delta)
{
  tm->tm_mon -= delta;
  while (tm->tm_mon < 0) {
    --tm->tm_year;
    tm->tm_mon += 12;
  }
}

/** Return the start of the accounting period that contains the time
 * <b>now</b> */
static time_t
start_of_accounting_period_containing(time_t now)
{
  struct tm *tm;
  /* Only months are supported. */
  tm = gmtime(&now);
  /* If this is before the Nth, we want the Nth of last month. */
  if (tm->tm_mday < get_options()->AccountingStart) {
    decr_month(tm, 1);
  }
  /* Otherwise, the month and year are correct.*/

  tm->tm_mday = get_options()->AccountingStart;
  tm->tm_hour = 0;
  tm->tm_min = 0;
  tm->tm_sec = 0;
  return tor_timegm(tm);
}

/** Return the start of the accounting period that comes after the one
 * containing the time <b>now</b>. */
static time_t
start_of_accounting_period_after(time_t now)
{
  time_t start;
  struct tm *tm;
  start = start_of_accounting_period_containing(now);

  tm = gmtime(&start);
  incr_month(tm, 1);
  return tor_timegm(tm);
}

/** Initialize the accounting subsystem. */
void
configure_accounting(time_t now)
{
  /* Try to remember our recorded usage. */
  if (!interval_start_time)
    read_bandwidth_usage(); /* If we fail, we'll leave values at zero, and
                             * reset below.*/
  if (!interval_start_time ||
      start_of_accounting_period_after(interval_start_time) <= now) {
    /* We didn't have recorded usage, or we don't have recorded usage
     * for this interval. Start a new interval. */
    log_fn(LOG_INFO, "Starting new accounting interval.");
    reset_accounting(now);
  } if (interval_start_time ==
        start_of_accounting_period_containing(interval_start_time)) {
    log_fn(LOG_INFO, "Continuing accounting interval.");
    /* We are in the interval we thought we were in. Do nothing.*/
    interval_end_time = start_of_accounting_period_after(interval_start_time);
  } else {
    log_fn(LOG_WARN, "Mismatched accounting interval; starting a fresh one.");
    reset_accounting(now);
  }
  accounting_set_wakeup_time();
}

/** Set expected_bandwidth_usage based on how much we sent/received
 * per minute last interval (if we were up for at least 30 minutes),
 * or based on our declared bandwidth otherwise. */
static void
update_expected_bandwidth(void)
{
  uint64_t used;
  uint32_t max_configured = (get_options()->BandwidthRateBytes * 60);
  /* XXX max_configured will be false if it exceeds
   * get_options()->AccountingMaxKB*1000, right? -RD
   */

  if (n_seconds_active_in_interval < 1800) {
    expected_bandwidth_usage = max_configured;
  } else {
    used = n_bytes_written_in_interval < n_bytes_read_in_interval ?
      n_bytes_read_in_interval : n_bytes_written_in_interval;
    expected_bandwidth_usage = (uint32_t)
      (used / (n_seconds_active_in_interval / 60));
    if (expected_bandwidth_usage > max_configured)
      expected_bandwidth_usage = max_configured;
  }
}

/** Called at the start of a new accounting interval: reset our
 * expected bandwidth usage based on what happened last time, set up
 * the start and end of the interval, and clear byte/time totals.
 */
static void
reset_accounting(time_t now) {
  log_fn(LOG_INFO, "Starting new accounting interval.");
  update_expected_bandwidth();
  interval_start_time = start_of_accounting_period_containing(now);
  interval_end_time = start_of_accounting_period_after(interval_start_time);
  n_bytes_read_in_interval = 0;
  n_bytes_written_in_interval = 0;
  n_seconds_active_in_interval = 0;
}

/** Return true iff we should save our bandwidth usage to disk. */
static INLINE int
time_to_record_bandwidth_usage(time_t now)
{
  /* Note every 60 sec */
#define NOTE_INTERVAL (60)
  /* Or every 20 megabytes */
#define NOTE_BYTES 20*(1024*1024)
  static uint64_t last_read_bytes_noted = 0;
  static uint64_t last_written_bytes_noted = 0;
  static time_t last_time_noted = 0;

  if (last_time_noted + NOTE_INTERVAL <= now ||
      last_read_bytes_noted + NOTE_BYTES <= n_bytes_read_in_interval ||
      last_written_bytes_noted + NOTE_BYTES <= n_bytes_written_in_interval ||
      (interval_end_time && interval_end_time <= now)) {
    last_time_noted = now;
    last_read_bytes_noted = n_bytes_read_in_interval;
    last_written_bytes_noted = n_bytes_written_in_interval;
    return 1;
  }
  return 0;
}

void
accounting_run_housekeeping(time_t now)
{
  if (now >= interval_end_time) {
    configure_accounting(now);
  }
  if (time_to_record_bandwidth_usage(now)) {
    if (record_bandwidth_usage(now)) {
      log_fn(LOG_ERR, "Couldn't record bandwidth usage; exiting.");
      exit(1);
    }
  }
}

/** Based on our interval and our estimated bandwidth, choose a
 * deterministic (but random-ish) time to wake up. */
static void
accounting_set_wakeup_time(void)
{
  struct tm *tm;
  char buf[ISO_TIME_LEN+1];
  char digest[DIGEST_LEN];
  crypto_digest_env_t *d;
  int n_days_in_interval;
  int n_days_to_exhaust_bw;
  int n_days_to_consider;

  format_iso_time(buf, interval_start_time);
  crypto_pk_get_digest(get_identity_key(), digest);

  d = crypto_new_digest_env();
  crypto_digest_add_bytes(d, buf, ISO_TIME_LEN);
  crypto_digest_add_bytes(d, digest, DIGEST_LEN);
  crypto_digest_get_digest(d, digest, DIGEST_LEN);
  crypto_free_digest_env(d);

  if (expected_bandwidth_usage)
    n_days_to_exhaust_bw =
      (get_options()->AccountingMaxKB/expected_bandwidth_usage)/(24*60);
  else
    n_days_to_exhaust_bw = 1;

  tm = gmtime(&interval_start_time);
  if (++tm->tm_mon > 11) { tm->tm_mon = 0; ++tm->tm_year; }
  n_days_in_interval = (tor_timegm(tm)-interval_start_time+1)/(24*60*60);

  n_days_to_consider = n_days_in_interval - n_days_to_exhaust_bw;

  /* XXX can we simplify this just by picking a random (non-deterministic)
   * time to be up? If we go down and come up, then we pick a new one. Is
   * that good enough? -RD */
  while (((unsigned char)digest[0]) > n_days_to_consider)
    crypto_digest(digest, digest, DIGEST_LEN);

  interval_wakeup_time = interval_start_time +
    24*60*60 * (unsigned char)digest[0];
}

/* XXXX009 This should also get called on HUP and shutdown. */
#define BW_ACCOUNTING_VERSION 1
/** Save all our bandwidth tracking information to disk. Return 0 on
 * success, -1 on failure*/
static int
record_bandwidth_usage(time_t now)
{
  char buf[128];
  char fname[512];
  char time1[ISO_TIME_LEN+1];
  char time2[ISO_TIME_LEN+1];
  char *cp = buf;
  /* Format is:
     Version\nTime\nTime\nRead\nWrite\nSeconds\nExpected-Rate\n */

  format_iso_time(time1, interval_start_time);
  format_iso_time(time2, now);
  tor_snprintf(cp, sizeof(buf),
               "%d\n%s\n%s\n"U64_FORMAT"\n"U64_FORMAT"\n%lu\n%lu\n",
               BW_ACCOUNTING_VERSION,
               time1,
               time2,
               U64_PRINTF_ARG(n_bytes_read_in_interval),
               U64_PRINTF_ARG(n_bytes_written_in_interval),
               (unsigned long)n_seconds_active_in_interval,
               (unsigned long)expected_bandwidth_usage);
  tor_snprintf(fname, sizeof(fname), "%s/bw_accounting",
               get_options()->DataDirectory);

  return write_str_to_file(fname, buf, 0);
}

/** Read stored accounting information from disk. Return 0 on success;
 * return -1 and change nothing on failure. */
static int
read_bandwidth_usage(void)
{
  char *s = NULL;
  char fname[512];
  time_t t1, t2;
  uint64_t n_read, n_written;
  uint32_t expected_bw, n_seconds;
  smartlist_t *elts;
  int ok;

  tor_snprintf(fname, sizeof(fname), "%s/bw_accounting",
               get_options()->DataDirectory);
  if (!(s = read_file_to_str(fname, 0))) {
    return 0;
  }
  elts = smartlist_create();
  smartlist_split_string(elts, s, "\n", SPLIT_SKIP_SPACE|SPLIT_IGNORE_BLANK,0);
  tor_free(s);

  if (smartlist_len(elts)<1 ||
      atoi(smartlist_get(elts,0)) != BW_ACCOUNTING_VERSION) {
    log_fn(LOG_WARN, "Unrecognized bw_accounting file version: %s",
           (const char*)smartlist_get(elts,0));
    goto err;
  }
  if (smartlist_len(elts) < 7) {
    log_fn(LOG_WARN, "Corrupted bw_accounting file: %d lines",
           smartlist_len(elts));
    goto err;
  }
  if (parse_iso_time(smartlist_get(elts,1), &t1)) {
    log_fn(LOG_WARN, "Error parsing bandwidth usage start time.");
    goto err;
  }
  if (parse_iso_time(smartlist_get(elts,2), &t2)) {
    log_fn(LOG_WARN, "Error parsing bandwidth usage last-written time");
    goto err;
  }
  n_read = tor_parse_uint64(smartlist_get(elts,3), 10, 0, UINT64_MAX,
                            &ok, NULL);
  if (!ok) {
    log_fn(LOG_WARN, "Error parsing number of bytes read");
    goto err;
  }
  n_written = tor_parse_uint64(smartlist_get(elts,4), 10, 0, UINT64_MAX,
                               &ok, NULL);
  if (!ok) {
    log_fn(LOG_WARN, "Error parsing number of bytes read");
    goto err;
  }
  n_seconds = (uint32_t)tor_parse_ulong(smartlist_get(elts,5), 10,0,ULONG_MAX,
                                        &ok, NULL);
  if (!ok) {
    log_fn(LOG_WARN, "Error parsing number of seconds live");
    goto err;
  }
  expected_bw =(uint32_t)tor_parse_ulong(smartlist_get(elts,6), 10,0,ULONG_MAX,
                                        &ok, NULL);
  if (!ok) {
    log_fn(LOG_WARN, "Error parsing expected bandwidth");
    goto err;
  }

  n_bytes_read_in_interval = n_read;
  n_bytes_written_in_interval = n_written;
  n_seconds_active_in_interval = n_seconds;
  interval_start_time = t1;
  expected_bandwidth_usage = expected_bw;

  accounting_set_wakeup_time();
  return 0;
 err:
  SMARTLIST_FOREACH(elts, char *, cp, tor_free(cp));
  smartlist_free(elts);
  return -1;
}

/** Return true iff we have sent/received all the bytes we are willing
 * to send/receive this interval. */
static int
hibernate_hard_limit_reached(void)
{
  uint64_t hard_limit = get_options()->AccountingMaxKB<<10;
  if (!hard_limit)
    return 0;
  return n_bytes_read_in_interval >= hard_limit
    || n_bytes_written_in_interval >= hard_limit;
}

/** Return true iff we have sent/received almost all the bytes we are willing
 * to send/receive this interval. */
static int hibernate_soft_limit_reached(void)
{
  uint64_t soft_limit = (uint64_t) ((get_options()->AccountingMaxKB<<10) * .99);
  if (!soft_limit)
    return 0;
  return n_bytes_read_in_interval >= soft_limit
    || n_bytes_written_in_interval >= soft_limit;
}

/** Called when we get a SIGINT, or when bandwidth soft limit is
 * reached. Puts us into "loose hibernation": we don't accept new
 * connections, but we continue handling old ones. */
static void hibernate_begin(int new_state, time_t now) {
  connection_t *conn;

  if(hibernate_state == HIBERNATE_STATE_EXITING) {
    /* we've been called twice now. close immediately. */
    log(LOG_NOTICE,"Second sigint received; exiting now.");
    tor_cleanup();
    exit(0);
  }

  /* close listeners. leave control listener(s). */
  while((conn = connection_get_by_type(CONN_TYPE_OR_LISTENER)) ||
        (conn = connection_get_by_type(CONN_TYPE_AP_LISTENER)) ||
        (conn = connection_get_by_type(CONN_TYPE_DIR_LISTENER))) {
    log_fn(LOG_INFO,"Closing listener type %d", conn->type);
    connection_mark_for_close(conn);
  }

  /* XXX kill intro point circs */
  /* XXX upload rendezvous service descriptors with no intro points */

  if(new_state == HIBERNATE_STATE_EXITING) {
    log(LOG_NOTICE,"Interrupt: will shut down in %d seconds. Interrupt again to exit now.", SHUTDOWN_WAIT_LENGTH);
    hibernate_end_time = time(NULL) + SHUTDOWN_WAIT_LENGTH;
  } else { /* soft limit reached */
    hibernate_end_time = interval_end_time;
  }

  hibernate_state = new_state;
  record_bandwidth_usage(time(NULL));
}

/** Called when we've been hibernating and our timeout is reached. */
static void
hibernate_end(int new_state) {

  tor_assert(hibernate_state == HIBERNATE_STATE_LOWBANDWIDTH ||
             hibernate_state == HIBERNATE_STATE_DORMANT);

  /* listeners will be relaunched in run_scheduled_events() in main.c */
  log_fn(LOG_NOTICE,"Hibernation period ended. Resuming normal activity.");

  hibernate_state = new_state;
  hibernate_end_time = 0; /* no longer hibernating */
}

/** A wrapper around hibernate_begin, for when we get SIGINT. */
void
hibernate_begin_shutdown(void) {
  hibernate_begin(HIBERNATE_STATE_EXITING, time(NULL));
}

/** Return true iff we are currently hibernating. */
int
we_are_hibernating(void) {
  return hibernate_state != HIBERNATE_STATE_LIVE;
}

/** If we aren't currently dormant, close all connections and become
 * dormant. */
static void
hibernate_go_dormant(void) {
  connection_t *conn;

  if (hibernate_state == HIBERNATE_STATE_DORMANT)
    return;

  hibernate_state = HIBERNATE_STATE_DORMANT;
  log_fn(LOG_NOTICE,"Going dormant. Blowing away remaining connections.");

  /* Close all OR/AP/exit conns. Leave dir conns because we still want
   * to be able to upload server descriptors so people know we're still
   * running, and download directories so we can detect if we're obsolete.
   * Leave control conns because we still want to be controllable.
   */
  while((conn = connection_get_by_type(CONN_TYPE_OR)) ||
        (conn = connection_get_by_type(CONN_TYPE_AP)) ||
        (conn = connection_get_by_type(CONN_TYPE_EXIT))) {
    log_fn(LOG_INFO,"Closing conn type %d", conn->type);
    connection_mark_for_close(conn);
  }

  record_bandwidth_usage(time(NULL));
}

/** Called when hibernate_end_time has arrived. */
static void
hibernate_end_time_elapsed(time_t now)
{
  /* The interval has ended, or it is wakeup time.  Find out which. */
  accounting_run_housekeeping(now);
  if (interval_wakeup_time <= now) {
    /* The interval hasn't changed, but interval_wakeup_time has passed.
     * It's time to wake up and start being a server. */
    hibernate_end(HIBERNATE_STATE_LIVE);
    return;
  } else {
    /* The interval has changed, and it isn't time to wake up yet. */
    hibernate_end_time = interval_wakeup_time;
    if (hibernate_state != HIBERNATE_STATE_DORMANT)
      /* We weren't sleeping before; we should sleep now. */
      hibernate_go_dormant();
  }
}

/** The big function. Consider our environment and decide if it's time
 * to start/stop hibernating.
 */
void consider_hibernation(time_t now) {

  /* If we're in 'exiting' mode, then we just shut down after the interval
   * elapses. */
  if (hibernate_state == HIBERNATE_STATE_EXITING) {
    tor_assert(hibernate_end_time);
    if(hibernate_end_time <= now) {
      log(LOG_NOTICE,"Clean shutdown finished. Exiting.");
      tor_cleanup();
      exit(0);
    }
    return; /* if exiting soon, don't worry about bandwidth limits */
  }

  if(hibernate_state == HIBERNATE_STATE_DORMANT) {
    /* We've been hibernating because of bandwidth accounting. */
    tor_assert(hibernate_end_time);
    if (hibernate_end_time > now) {
      /* If we're hibernating, don't wake up until it's time, regardless of
       * whether we're in a new interval. */
      return ;
    } else {
      hibernate_end_time_elapsed(now);
    }
  }

  /* Else, we aren't hibernating. See if it's time to start hibernating, or to
   * go dormant. */
  if (hibernate_state == HIBERNATE_STATE_LIVE &&
      hibernate_soft_limit_reached()) {
    log_fn(LOG_NOTICE,"Bandwidth soft limit reached; commencing hibernation.");
    hibernate_begin(HIBERNATE_STATE_LOWBANDWIDTH, now);
  }

  if (hibernate_state == HIBERNATE_STATE_LOWBANDWIDTH) {
    if (hibernate_hard_limit_reached()) {
      hibernate_go_dormant();
    } else if (hibernate_end_time <= now) {
      /* The hibernation period ended while we were still in lowbandwidth.*/
      hibernate_end_time_elapsed(now);
    }
  }
}