From ba3448fb8093afd9d298cef1123a1bedfea13999 Mon Sep 17 00:00:00 2001
From: Christopher Baines <cbaines8@gmail.com>
Date: Wed, 7 Sep 2011 09:44:04 +0100
Subject: Added LEDMatrix.pde, this should be used to test the first matrix
 only! (at the moment). Also added font, this can be used only with java 1.70
 and an eclipse maintantice build?

---
 Arduino/ButtonMatrix/ButtonMatrix.pde | 28 ++++++++++++++++++++++++++++
 Arduino/LEDMatrix/LEDMatrix.pde       | 34 ++++++++++++++++++++++++++++++++++
 Arduino/Libraies/AS1107/AS1107.h      |  6 +++---
 3 files changed, 65 insertions(+), 3 deletions(-)
 create mode 100644 Arduino/LEDMatrix/LEDMatrix.pde

(limited to 'Arduino')

diff --git a/Arduino/ButtonMatrix/ButtonMatrix.pde b/Arduino/ButtonMatrix/ButtonMatrix.pde
index 6ce18f4..1ed494c 100755
--- a/Arduino/ButtonMatrix/ButtonMatrix.pde
+++ b/Arduino/ButtonMatrix/ButtonMatrix.pde
@@ -3,6 +3,14 @@
 const byte ROWS = 19;
 const byte COLS = 8;
 
+
+// these constants describe the pins for the acellarometer . They won't change:
+const int groundpin = 18;             // analog input pin 4 -- ground
+const int powerpin = 19;              // analog input pin 5 -- voltage
+const int xpin = A3;                  // x-axis of the accelerometer
+const int ypin = A2;                  // y-axis
+const int zpin = A1;                  // z-axis (only on 3-axis models)
+
 /* Each of the buttons can be refered to by a number 
    At the moment the byte overflow for the 127+ numbers is dealt with at the 
    getKey time, but if a unsigned byte could be used here it would remove the need
@@ -33,6 +41,14 @@ void setup(){
   Serial.begin(115200);
   Serial.println("Go");
 
+  // Provide ground and power by using the analog inputs as normal
+  // digital pins.  This makes it possible to directly connect the
+  // breakout board to the Arduino.  If you use the normal 5V and
+  // GND pins on the Arduino, you can remove these lines.
+  pinMode(groundpin, OUTPUT);
+  pinMode(powerpin, OUTPUT);
+  digitalWrite(groundpin, LOW);
+  digitalWrite(powerpin, HIGH);
 }
 /* Send numbers back and forth to test the integrity of the serial communication 
    Computer sends the first byte
@@ -58,4 +74,16 @@ void loop(){
   if (customKey != NO_KEY){
     Serial.println(customKeyInt);
   }
+  
+  // print the sensor values:
+  Serial.print(analogRead(xpin));
+  // print a tab between values:
+  Serial.print("\t");
+  Serial.print(analogRead(ypin));
+  // print a tab between values:
+  Serial.print("\t");
+  Serial.print(analogRead(zpin));
+  Serial.println();
+  // delay before next reading:
+  delay(100);
 }
diff --git a/Arduino/LEDMatrix/LEDMatrix.pde b/Arduino/LEDMatrix/LEDMatrix.pde
new file mode 100644
index 0000000..0d3994b
--- /dev/null
+++ b/Arduino/LEDMatrix/LEDMatrix.pde
@@ -0,0 +1,34 @@
+// test program for three cascaded AS1107
+// if you got a different configuration you need to
+// modify the library itself.
+
+#include <AS1107.h>
+
+// Arduino pins
+const byte CsnPin = 2 ; // Chip select (Low active)
+const byte ClkPin = 3 ; // Serial Clockq
+const byte DataPin = 4 ; // Serial Data
+
+byte buffer [ 8 ] ; // Screen buffer (No. of modules * 8)
+AS1107 matrix ( CsnPin, ClkPin, DataPin ) ;
+
+const byte d = 0 ;
+int count= 1 ;
+void setup ( )
+{
+  matrix. Init ( buffer, 7, 7, 0 ) ;
+}
+
+void loop ( )
+{
+  for (int x=0; x<8; x++) {
+    for (int y=0; y<8; y++) {
+      matrix.SetLed(x,y,1);
+      matrix.Update();
+      delay(1000);
+      matrix.SetLed(x,y,0);
+      matrix.Update();
+      delay(1000);
+    }
+  }
+}
diff --git a/Arduino/Libraies/AS1107/AS1107.h b/Arduino/Libraies/AS1107/AS1107.h
index 60ad6ad..80b01da 100755
--- a/Arduino/Libraies/AS1107/AS1107.h
+++ b/Arduino/Libraies/AS1107/AS1107.h
@@ -59,9 +59,9 @@ class AS1107
     // ***************************************
     // Set your module configuration here
     // ***************************************
-    static const byte Maxx=15;      // maximum x - Pixels of the Module
-    static const byte Maxy=7;         // maximum y - Pixels of the Module
-    static const byte HighestCtrlNum=1; // Number of Matrix modules -1 (0 = single module)
+    static const byte Maxx=8;      // maximum x - Pixels of the Module
+    static const byte Maxy=19;         // maximum y - Pixels of the Module
+    static const byte HighestCtrlNum=5; // Number of Matrix modules -1 (0 = single module)
 
   private:
     byte _cspin;
-- 
cgit v1.2.3