diff options
Diffstat (limited to 'Arduino/ButtonMatrix/ButtonMatrix.pde')
| -rwxr-xr-x | Arduino/ButtonMatrix/ButtonMatrix.pde | 110 |
1 files changed, 72 insertions, 38 deletions
diff --git a/Arduino/ButtonMatrix/ButtonMatrix.pde b/Arduino/ButtonMatrix/ButtonMatrix.pde index 41ae6ab..99c879d 100755 --- a/Arduino/ButtonMatrix/ButtonMatrix.pde +++ b/Arduino/ButtonMatrix/ButtonMatrix.pde @@ -11,29 +11,48 @@ const int ypin = A2; // y-axis const int zpin = A1; // z-axis (only on 3-axis models) const int selfTest = A0; +const int id = 1; + /* Each of the buttons can be refered to by a number - At the moment the byte overflow for the 127+ numbers is dealt with at the - getKey time, but if a unsigned byte could be used here it would remove the need - for the correction? -*/ + At the moment the byte overflow for the 127+ numbers is dealt with at the + getKey time, but if a unsigned byte could be used here it would remove the need + for the correction? + */ char keys[COLS][ROWS] = { -{1, 9, 17, 25, 33, 41, 49, 57, 65, 73, 81, 89, 97, 105, 113, 121, 129, 137, 145}, -{2, 10, 18, 26, 34, 42, 50, 58, 66, 74, 82, 90, 98, 106, 114, 122, 130, 138, 146}, -{3, 11, 19, 27, 35, 43, 51, 59, 67, 75, 83, 91, 99, 107, 115, 123, 131, 139, 147}, -{4, 12, 20, 28, 36, 44, 52, 60, 68, 76, 84, 92, 100, 108, 116, 124, 132, 140, 148}, -{5, 13, 21, 29, 37, 45, 53, 61, 69, 77, 85, 93, 101, 109, 117, 125, 133, 141, 149}, -{6, 14, 22, 30, 38, 46, 54, 62, 70, 78, 86, 94, 102, 110, 118, 126, 134, 142, 150}, -{7, 15, 23, 31, 39, 47, 55, 63, 71, 79, 87, 95, 103, 111, 119, 127, 135, 143, 151}, -{8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128, 136, 144, 152} + { + 1, 9, 17, 25, 33, 41, 49, 57, 65, 73, 81, 89, 97, 105, 113, 121, 129, 137, 145 } + , + { + 2, 10, 18, 26, 34, 42, 50, 58, 66, 74, 82, 90, 98, 106, 114, 122, 130, 138, 146 } + , + { + 3, 11, 19, 27, 35, 43, 51, 59, 67, 75, 83, 91, 99, 107, 115, 123, 131, 139, 147 } + , + { + 4, 12, 20, 28, 36, 44, 52, 60, 68, 76, 84, 92, 100, 108, 116, 124, 132, 140, 148 } + , + { + 5, 13, 21, 29, 37, 45, 53, 61, 69, 77, 85, 93, 101, 109, 117, 125, 133, 141, 149 } + , + { + 6, 14, 22, 30, 38, 46, 54, 62, 70, 78, 86, 94, 102, 110, 118, 126, 134, 142, 150 } + , + { + 7, 15, 23, 31, 39, 47, 55, 63, 71, 79, 87, 95, 103, 111, 119, 127, 135, 143, 151 } + , + { + 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128, 136, 144, 152 } }; -byte colPins[COLS] = {9, 8, 7, 6, 5, 4, 3, 2}; -byte rowPins[ROWS] = {14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42}; +byte colPins[COLS] = { + 9, 8, 7, 6, 5, 4, 3, 2}; +byte rowPins[ROWS] = { + 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42}; /* - Becuase of the diodes being fitted the WRONG WAY ROUND, - the columns are rows and the rows are columns, have fun! -*/ + Becuase of the diodes being fitted the WRONG WAY ROUND, + the columns are rows and the rows are columns, have fun! + */ // ROW COL ROWS COLS Keypad keypad = Keypad( makeKeymap(keys), colPins, rowPins, COLS, ROWS); @@ -53,8 +72,8 @@ void setup(){ //digitalWrite(selfTest, HIGH); } /* Send numbers back and forth to test the integrity of the serial communication - Computer sends the first byte -*/ + Computer sends the first byte + */ boolean runSerialTest() { Serial.println("Begining Serial Test"); delay(10); @@ -68,24 +87,39 @@ boolean runSerialTest() { } return true; } - + void loop(){ - char customKey = keypad.getKey(); - int customKeyInt = customKey; - if (customKeyInt < 0) customKeyInt += 256; - if (customKey != NO_KEY){ - Serial.println(customKeyInt); - } - - // print the sensor values: - Serial.print(analogRead(xpin)); - // print a tab between values: - Serial.print("\t"); - Serial.print(analogRead(ypin)); - // print a tab between values: - Serial.print("\t"); - Serial.print(analogRead(zpin)); - Serial.println(); - // delay before next reading: - delay(10); + //if (Serial.peek() == 0x49) { + Serial.write(37); + //Serial.write(Serial.read()); + /*if (Serial.read() == 0x44) { + Serial.write(id); + }*/ + //} else { + // Serial.write(1); + //Serial.write(Serial.read()); + //} + + /*char customKey = keypad.getKey(); + int customKeyInt = customKey; + if (customKeyInt < 0) customKeyInt += 256; + if (customKey != NO_KEY){ + Serial.println(customKeyInt); + } + + // print the sensor values: + Serial.print(analogRead(xpin)); + // print a tab between values: + Serial.print("\t"); + Serial.print(analogRead(ypin)); + // print a tab between values: + Serial.print("\t"); + Serial.print(analogRead(zpin)); + Serial.println(); + // delay before next reading: + //delay(10);*/ } + + + + |