Checking for the skas3 patch in the host...not found Checking for /proc/mm...not found Linux version 2.4.22-5um (dancer@atoron) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 2003年 11月 16日 日曜日 23:07:20 JST On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: eth0=slirp,,slirp-fullbolt con0=fd:0,fd:1 con=pty root=/dev/root rootflags=/ rootfstype=hostfs ubd1=/home/dancer/cvscheckout/pbuilder/pbuilder/testsuite/testimage init=/usr/lib/rootstrap/builder devfs=mount rsworkdir=/home/dancer/.pbuilder-user-mode-linux Calibrating delay loop... 1574.96 BogoMIPS Memory: 28528k available Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for host processor cmov support...Yes Checking for host processor xmm support...No Checking that ptrace can change system call numbers...OK Checking that host ptys support output SIGIO...Yes Checking that host ptys support SIGIO on close...No, enabling workaround POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Initializing Cryptographic API Initializing software serial port version 1 Netdevice 0 : SLIRP backend - command line: 'slirp-fullbolt' mconsole (version 2) initialized on /home/dancer/.uml/yy18ZI/mconsole unable to open root_fs for validation Partition check: ubdb: unknown partition table Initializing stdio console driver NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (hostfs filesystem) readonly. Mounted devfs on /dev builder running... Using rootstrap module network from: /usr/lib/rootstrap/modules/network Slirp v1.0.14pre1 (BETA) Copyright (c) 1995,1996 Danny Gasparovski and others. All rights reserved. This program is copyrighted, free software. Please read the file COPYRIGHT that came with the Slirp package for the terms and conditions of the copyright. IP address of Slirp host: 192.168.1.62 IP address of your DNS(s): 218.231.0.10, 218.231.0.42 Your address is 10.0.2.15 (or anything else you want) Type five zeroes (0) to exit. [autodetect SLIP/CSLIP, MTU 1500, MRU 1500] SLiRP Ready ... Using rootstrap module mkfs from: /usr/lib/rootstrap/modules/mkfs Using rootstrap module mount from: /usr/lib/rootstrap/modules/mount Using rootstrap module debian from: /usr/lib/rootstrap/modules/debian I: Retrieving debootstrap.invalid_dists_sarge_Release I: Validating debootstrap.invalid_dists_sarge_Release I: Retrieving debootstrap.invalid_dists_sarge_main_binary-i386_Packages I: Validating debootstrap.invalid_dists_sarge_main_binary-i386_Packages I: Checking adduser... I: Checking apt... I: Checking apt-utils... I: Checking at... I: Checking base-config... I: Checking base-files... I: Checking base-passwd... I: Checking bash... I: Checking bsdmainutils... I: Checking bsdutils... I: Checking console-common... I: Checking console-data... I: Checking console-tools... I: Checking coreutils... I: Checking cpio... I: Checking cron... I: Checking debconf... I: Checking debconf-i18n... I: Checking debianutils... I: Checking diff... I: Checking dpkg... I: Checking dselect... I: Checking e2fslibs... I: Checking e2fsprogs... I: Checking ed... I: Checking exim4... I: Checking exim4-base... I: Checking exim4-config... I: Checking exim4-daemon-light... I: Checking fdutils... I: Checking findutils... I: Checking gcc-3.2-base... I: Checking gcc-3.3-base... I: Checking gettext-base... I: Checking grep... I: Checking groff-base... I: Checking gzip... I: Checking hostname... I: Checking ifupdown... I: Checking info... I: Checking initscripts... I: Checking ipchains... I: Checking iptables... I: Checking iputils-ping... I: Checking klogd... I: Checking libblkid1... I: Checking libc6... I: Checking libcap1... I: Checking libcomerr2... I: Checking libconsole... I: Checking libdb1-compat... I: Checking libdb2... I: Checking libdb3... I: Checking libgcc1... I: Checking libgcrypt1... I: Checking libgdbm3... I: Checking libgnutls7... I: Checking libident... I: Checking liblocale-gettext-perl... I: Checking liblockfile1... I: Checking liblzo1... I: Checking libncurses5... I: Checking libnewt0.51... I: Checking libopencdk4... I: Checking libpam-modules... I: Checking libpam-runtime... I: Checking libpam0g... I: Checking libpcap0.7... I: Checking libpcre3... I: Checking libpopt0... I: Checking libsasl2... I: Checking libss2... I: Checking libssl0.9.7... I: Checking libstdc++5... I: Checking libtasn1-0... I: Checking libtext-charwidth-perl... I: Checking libtext-iconv-perl... I: Checking libtext-wrapi18n-perl... I: Checking libtextwrap1... I: Checking libuuid1... I: Checking libwrap0... I: Checking lilo... I: Checking login... I: Checking logrotate... I: Checking mailx... I: Checking makedev... I: Checking man-db... I: Checking manpages... I: Checking mawk... I: Checking mbr... I: Checking modconf... I: Checking modutils... I: Checking mount... I: Checking nano... I: Checking ncurses-base... I: Checking ncurses-bin... I: Checking net-tools... I: Checking netbase... I: Checking netkit-inetd... I: Checking nvi... I: Checking passwd... I: Checking pciutils... I: Checking perl-base... I: Checking ppp... I: Checking pppconfig... I: Checking pppoe... I: Checking pppoeconf... I: Checking procps... I: Checking psmisc... I: Checking sed... I: Checking slang1... I: Checking slang1a-utf8... I: Checking sysklogd... I: Checking syslinux... I: Checking sysv-rc... I: Checking sysvinit... I: Checking tar... I: Checking tasksel... I: Checking tcpd... I: Checking telnet... I: Checking util-linux... I: Checking wget... I: Checking whiptail... I: Checking zlib1g... I: Retrieving adduser I: Validating adduser I: Retrieving apt I: Validating apt I: Retrieving apt-utils I: Validating apt-utils I: Retrieving at I: Validating at I: Retrieving base-config I: Validating base-config I: Retrieving base-files I: Validating base-files I: Retrieving base-passwd I: Validating base-passwd I: Retrieving bash I: Validating bash I: Retrieving bsdmainutils I: Validating bsdmainutils I: Retrieving bsdutils I: Validating bsdutils I: Retrieving console-common I: Validating console-common I: Retrieving console-data I: Validating console-data I: Retrieving console-tools I: Validating console-tools I: Retrieving coreutils I: Validating coreutils I: Retrieving cpio I: Validating cpio I: Retrieving cron I: Validating cron I: Retrieving debconf I: Validating debconf I: Retrieving debconf-i18n I: Validating debconf-i18n I: Retrieving debianutils I: Validating debianutils I: Retrieving diff I: Validating diff I: Retrieving dpkg I: Validating dpkg I: Retrieving dselect I: Validating dselect I: Retrieving e2fslibs I: Validating e2fslibs I: Retrieving e2fsprogs I: Validating e2fsprogs I: Retrieving ed I: Validating ed I: Retrieving exim4 I: Validating exim4 I: Retrieving exim4-base I: Validating exim4-base I: Retrieving exim4-config I: Validating exim4-config I: Retrieving exim4-daemon-light I: Validating exim4-daemon-light I: Retrieving fdutils I: Validating fdutils I: Retrieving findutils I: Validating findutils I: Retrieving gcc-3.2-base I: Validating gcc-3.2-base I: Retrieving gcc-3.3-base I: Validating gcc-3.3-base I: Retrieving gettext-base I: Validating gettext-base I: Retrieving grep I: Validating grep I: Retrieving groff-base I: Validating groff-base I: Retrieving gzip I: Validating gzip I: Retrieving hostname I: Validating hostname I: Retrieving ifupdown I: Validating ifupdown I: Retrieving info I: Validating info I: Retrieving initscripts I: Validating initscripts I: Retrieving ipchains I: Validating ipchains I: Retrieving iptables I: Validating iptables I: Retrieving iputils-ping I: Validating iputils-ping I: Retrieving klogd I: Validating klogd I: Retrieving libblkid1 I: Validating libblkid1 I: Retrieving libc6 I: Validating libc6 I: Retrieving libcap1 I: Validating libcap1 I: Retrieving libcomerr2 I: Validating libcomerr2 I: Retrieving libconsole I: Validating libconsole I: Retrieving libdb1-compat I: Validating libdb1-compat I: Retrieving libdb2 I: Validating libdb2 I: Retrieving libdb3 I: Validating libdb3 I: Retrieving libgcc1 I: Validating libgcc1 I: Retrieving libgcrypt1 I: Validating libgcrypt1 I: Retrieving libgdbm3 I: Validating libgdbm3 I: Retrieving libgnutls7 I: Validating libgnutls7 I: Retrieving libident I: Validating libident I: Retrieving liblocale-gettext-perl I: Validating liblocale-gettext-perl I: Retrieving liblockfile1 I: Validating liblockfile1 I: Retrieving liblzo1 I: Validating liblzo1 I: Retrieving libncurses5 I: Validating libncurses5 I: Retrieving libnewt0.51 I: Validating libnewt0.51 I: Retrieving libopencdk4 I: Validating libopencdk4 I: Retrieving libpam-modules I: Validating libpam-modules I: Retrieving libpam-runtime I: Validating libpam-runtime I: Retrieving libpam0g I: Validating libpam0g I: Retrieving libpcap0.7 I: Validating libpcap0.7 I: Retrieving libpcre3 I: Validating libpcre3 I: Retrieving libpopt0 I: Validating libpopt0 I: Retrieving libsasl2 I: Validating libsasl2 I: Retrieving libss2 I: Validating libss2 I: Retrieving libssl0.9.7 I: Validating libssl0.9.7 I: Retrieving libstdc++5 I: Validating libstdc++5 I: Retrieving libtasn1-0 I: Validating libtasn1-0 I: Retrieving libtext-charwidth-perl I: Validating libtext-charwidth-perl I: Retrieving libtext-iconv-perl I: Validating libtext-iconv-perl I: Retrieving libtext-wrapi18n-perl I: Validating libtext-wrapi18n-perl I: Retrieving libtextwrap1 I: Validating libtextwrap1 I: Retrieving libuuid1 I: Validating libuuid1 I: Retrieving libwrap0 I: Validating libwrap0 I: Retrieving lilo I: Validating lilo I: Retrieving login I: Validating login I: Retrieving logrotate I: Validating logrotate I: Retrieving mailx I: Validating mailx I: Retrieving makedev I: Validating makedev I: Retrieving man-db I: Validating man-db I: Retrieving manpages I: Validating manpages I: Retrieving mawk I: Validating mawk I: Retrieving mbr I: Validating mbr I: Retrieving modconf I: Validating modconf I: Retrieving modutils I: Validating modutils I: Retrieving mount I: Validating mount I: Retrieving nano I: Validating nano I: Retrieving ncurses-base I: Validating ncurses-base I: Retrieving ncurses-bin I: Validating ncurses-bin I: Retrieving net-tools I: Validating net-tools I: Retrieving netbase I: Validating netbase I: Retrieving netkit-inetd I: Validating netkit-inetd I: Retrieving nvi I: Validating nvi I: Retrieving passwd I: Validating passwd I: Retrieving pciutils I: Validating pciutils I: Retrieving perl-base I: Validating perl-base I: Retrieving ppp I: Validating ppp I: Retrieving pppconfig I: Validating pppconfig I: Retrieving pppoe I: Validating pppoe I: Retrieving pppoeconf I: Validating pppoeconf I: Retrieving procps I: Validating procps I: Retrieving psmisc I: Validating psmisc I: Retrieving sed I: Validating sed I: Retrieving slang1 I: Validating slang1 I: Retrieving slang1a-utf8 I: Validating slang1a-utf8 I: Retrieving sysklogd I: Validating sysklogd I: Retrieving syslinux I: Validating syslinux I: Retrieving sysv-rc I: Validating sysv-rc I: Retrieving sysvinit I: Validating sysvinit I: Retrieving tar I: Validating tar I: Retrieving tasksel I: Validating tasksel I: Retrieving tcpd I: Validating tcpd I: Retrieving telnet I: Validating telnet I: Retrieving util-linux I: Validating util-linux I: Retrieving wget I: Validating wget I: Retrieving whiptail I: Validating whiptail I: Retrieving zlib1g I: Validating zlib1g I: Extracting base-files... I: Extracting base-passwd... I: Extracting bash... I: Extracting bsdutils... I: Extracting coreutils... I: Extracting debconf... I: Extracting debconf-i18n... I: Extracting liblocale-gettext-perl... I: Extracting libtext-wrapi18n-perl... I: Extracting libtext-charwidth-perl... I: Extracting debianutils... I: Extracting diff... I: Extracting dpkg... I: Extracting dselect... I: Extracting libblkid1... I: Extracting e2fsprogs... I: Extracting e2fslibs... I: Extracting libcomerr2... I: Extracting libss2... I: Extracting libuuid1... I: Extracting findutils... I: Extracting grep... I: Extracting gzip... I: Extracting hostname... I: Extracting libcap1... I: Extracting libc6... I: Extracting libdb1-compat... I: Extracting libdb2... I: Extracting libdb3... I: Extracting libncurses5... I: Extracting libnewt0.51... I: Extracting libpam-modules... I: Extracting libpam-runtime... I: Extracting libpam0g... I: Extracting libpopt0... I: Extracting login... I: Extracting makedev... I: Extracting mawk... I: Extracting modutils... I: Extracting mount... I: Extracting ncurses-base... I: Extracting ncurses-bin... I: Extracting passwd... I: Extracting perl-base... I: Extracting procps... I: Extracting sed... I: Extracting slang1... I: Extracting slang1a-utf8... I: Extracting initscripts... I: Extracting sysvinit... I: Extracting sysv-rc... I: Extracting tar... I: Extracting util-linux... I: Extracting whiptail... I: Extracting libgcc1... I: Extracting gcc-3.2-base... I: Extracting gcc-3.3-base... I: Extracting libstdc++5... I: Extracting mbr... I: Installing core packages... Selecting previously deselected package base-files. (Reading database ... 0 files and directories currently installed.) Unpacking base-files (from .../base-files_3.0.12_i386.deb) ... Selecting previously deselected package base-passwd. Unpacking base-passwd (from .../base-passwd_3.5.4_i386.deb) ... dpkg: base-passwd: dependency problems, but configuring anyway as you request: base-passwd depends on libc6 (>= 2.3.1-1); however: Package libc6 is not installed. Setting up base-passwd (3.5.4) ... dpkg: base-files: dependency problems, but configuring anyway as you request: base-files depends on awk; however: Package awk is not installed. Setting up base-files (3.0.12) ... dpkg: regarding .../archives/dpkg_1.10.18_i386.deb containing dpkg, pre-dependency problem: dpkg pre-depends on dselect dselect is not installed. dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../archives/dpkg_1.10.18_i386.deb containing dpkg, pre-dependency problem: dpkg pre-depends on libc6 (>= 2.3.2-1) dpkg: warning - ignoring pre-dependency problem ! (Reading database ... 84 files and directories currently installed.) Preparing to replace dpkg 1.10.18 (using .../archives/dpkg_1.10.18_i386.deb) ... Unpacking replacement dpkg ... dpkg: dpkg: dependency problems, but configuring anyway as you request: dpkg depends on dselect; however: Package dselect is not installed. dpkg depends on libc6 (>= 2.3.2-1); however: Package libc6 is not installed. Setting up dpkg (1.10.18) ... Moving /usr/info/dir to /usr/share/info/dir. Making /usr/info a symlink to /usr/share/info. Selecting previously deselected package libc6. (Reading database ... 220 files and directories currently installed.) Unpacking libc6 (from .../libc6_2.3.2.ds1-10_i386.deb) ... dpkg: libc6: dependency problems, but configuring anyway as you request: libc6 depends on libdb1-compat; however: Package libdb1-compat is not installed. Setting up libc6 (2.3.2.ds1-10) ... Current default timezone: 'UTC'. Local time is now: Wed Nov 19 23:24:26 UTC 2003. Universal Time is now: Wed Nov 19 23:24:26 UTC 2003. Run 'tzconfig' if you wish to change it. Package `sysvinit' is not installed and no info is available. Use dpkg --info (= dpkg-deb --info) to examine archive files, and dpkg --contents (= dpkg-deb --contents) to list their contents. Selecting previously deselected package perl-base. (Reading database ... 2231 files and directories currently installed.) Unpacking perl-base (from .../perl-base_5.8.0-18_i386.deb) ... Setting up perl-base (5.8.0-18) ... Selecting previously deselected package mawk. (Reading database ... 2349 files and directories currently installed.) Unpacking mawk (from .../mawk_1.3.3-11_i386.deb) ... Setting up mawk (1.3.3-11) ... Selecting previously deselected package debconf. (Reading database ... 2368 files and directories currently installed.) Unpacking debconf (from .../debconf_1.3.20_all.deb) ... dpkg: debconf: dependency problems, but configuring anyway as you request: debconf depends on debconf-i18n | debconf-english; however: Package debconf-i18n is not installed. Package debconf-english is not installed. Setting up debconf (1.3.20) ... I: Unpacking required packages... (Reading database ... 2503 files and directories currently installed.) Preparing to replace base-files 3.0.12 (using .../base-files_3.0.12_i386.deb) ... Unpacking replacement base-files ... Preparing to replace base-passwd 3.5.4 (using .../base-passwd_3.5.4_i386.deb) ... Unpacking replacement base-passwd ... Selecting previously deselected package bash. dpkg: regarding .../bash_2.05b-12_i386.deb containing bash, pre-dependency problem: bash pre-depends on libncurses5 (>= 5.3.20030510-1) dpkg: warning - ignoring pre-dependency problem ! Unpacking bash (from .../bash_2.05b-12_i386.deb) ... Selecting previously deselected package bsdutils. Unpacking bsdutils (from .../bsdutils_1%3a2.12-3_i386.deb) ... Selecting previously deselected package coreutils. Unpacking coreutils (from .../coreutils_5.0-5_i386.deb) ... Preparing to replace debconf 1.3.20 (using .../debconf_1.3.20_all.deb) ... Unpacking replacement debconf ... Selecting previously deselected package debconf-i18n. Unpacking debconf-i18n (from .../debconf-i18n_1.3.20_all.deb) ... Selecting previously deselected package liblocale-gettext-perl. Unpacking liblocale-gettext-perl (from .../liblocale-gettext-perl_1.01-17_i386.deb) ... Selecting previously deselected package libtext-wrapi18n-perl. Unpacking libtext-wrapi18n-perl (from .../libtext-wrapi18n-perl_0.06-1_all.deb) ... Selecting previously deselected package libtext-charwidth-perl. Unpacking libtext-charwidth-perl (from .../libtext-charwidth-perl_0.04-1_i386.deb) ... Selecting previously deselected package debianutils. dpkg: regarding .../debianutils_2.6_i386.deb containing debianutils, pre-dependency problem: debianutils pre-depends on coreutils (>= 4.5.8-1) coreutils is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! Unpacking debianutils (from .../debianutils_2.6_i386.deb) ... Selecting previously deselected package diff. Unpacking diff (from .../archives/diff_2.8.1-6_i386.deb) ... dpkg: regarding .../archives/dpkg_1.10.18_i386.deb containing dpkg, pre-dependency problem: dpkg pre-depends on dselect dselect is not installed. dpkg: warning - ignoring pre-dependency problem ! Preparing to replace dpkg 1.10.18 (using .../archives/dpkg_1.10.18_i386.deb) ... Unpacking replacement dpkg ... Selecting previously deselected package dselect. Unpacking dselect (from .../dselect_1.10.18_i386.deb) ... Selecting previously deselected package libblkid1. Unpacking libblkid1 (from .../libblkid1_1.34+1.35-WIP-2003.08.21-3_i386.deb) ... Selecting previously deselected package e2fsprogs. dpkg: regarding .../e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb containing e2fsprogs, pre-dependency problem: e2fsprogs pre-depends on e2fslibs (= 1.34+1.35-WIP-2003.08.21-3) dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb containing e2fsprogs, pre-dependency problem: e2fsprogs pre-depends on libblkid1 (>= 1.34-1) libblkid1 is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb containing e2fsprogs, pre-dependency problem: e2fsprogs pre-depends on libcomerr2 (>= 1.34-1) dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb containing e2fsprogs, pre-dependency problem: e2fsprogs pre-depends on libss2 (>= 1.34-1) dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb containing e2fsprogs, pre-dependency problem: e2fsprogs pre-depends on libuuid1 (>= 1.34-1) dpkg: warning - ignoring pre-dependency problem ! Unpacking e2fsprogs (from .../e2fsprogs_1.34+1.35-WIP-2003.08.21-3_i386.deb) ... Selecting previously deselected package e2fslibs. Unpacking e2fslibs (from .../e2fslibs_1.34+1.35-WIP-2003.08.21-3_i386.deb) ... Selecting previously deselected package libcomerr2. Unpacking libcomerr2 (from .../libcomerr2_1.34+1.35-WIP-2003.08.21-3_i386.deb) ... Selecting previously deselected package libss2. Unpacking libss2 (from .../libss2_1.34+1.35-WIP-2003.08.21-3_i386.deb) ... Selecting previously deselected package libuuid1. Unpacking libuuid1 (from .../libuuid1_1.34+1.35-WIP-2003.08.21-3_i386.deb) ... Selecting previously deselected package findutils. Unpacking findutils (from .../findutils_4.1.20-3_i386.deb) ... Selecting previously deselected package grep. Unpacking grep (from .../archives/grep_2.5.1-6_i386.deb) ... Selecting previously deselected package gzip. Unpacking gzip (from .../archives/gzip_1.3.5-7_i386.deb) ... Selecting previously deselected package hostname. Unpacking hostname (from .../hostname_2.10_i386.deb) ... Selecting previously deselected package libcap1. Unpacking libcap1 (from .../libcap1_1%3a1.10-12_i386.deb) ... Preparing to replace libc6 2.3.2.ds1-10 (using .../libc6_2.3.2.ds1-10_i386.deb) ... Unpacking replacement libc6 ... Selecting previously deselected package libdb1-compat. Unpacking libdb1-compat (from .../libdb1-compat_2.1.3-7_i386.deb) ... Selecting previously deselected package libdb2. Unpacking libdb2 (from .../libdb2_2%3a2.7.7.0-8_i386.deb) ... Selecting previously deselected package libdb3. Unpacking libdb3 (from .../libdb3_3.2.9-19_i386.deb) ... Selecting previously deselected package libncurses5. Unpacking libncurses5 (from .../libncurses5_5.3.20030719-1_i386.deb) ... Selecting previously deselected package libnewt0.51. Unpacking libnewt0.51 (from .../libnewt0.51_0.51.4-18_i386.deb) ... Selecting previously deselected package libpam-modules. Unpacking libpam-modules (from .../libpam-modules_0.76-14_i386.deb) ... Selecting previously deselected package libpam-runtime. Unpacking libpam-runtime (from .../libpam-runtime_0.76-14_all.deb) ... Selecting previously deselected package libpam0g. Unpacking libpam0g (from .../libpam0g_0.76-14_i386.deb) ... Selecting previously deselected package libpopt0. Unpacking libpopt0 (from .../libpopt0_1.7-2_i386.deb) ... Selecting previously deselected package login. dpkg: regarding .../login_1%3a4.0.3-12_i386.deb containing login, pre-dependency problem: login pre-depends on libpam0g (>= 0.76) libpam0g is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../login_1%3a4.0.3-12_i386.deb containing login, pre-dependency problem: login pre-depends on libpam-runtime (>= 0.76-13.1) libpam-runtime is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! Unpacking login (from .../login_1%3a4.0.3-12_i386.deb) ... Selecting previously deselected package makedev. Unpacking makedev (from .../makedev_2.3.1-63_all.deb) ... Preparing to replace mawk 1.3.3-11 (using .../mawk_1.3.3-11_i386.deb) ... Unpacking replacement mawk ... Selecting previously deselected package modutils. Unpacking modutils (from .../modutils_2.4.25-3_i386.deb) ... Selecting previously deselected package mount. Unpacking mount (from .../archives/mount_2.12-3_i386.deb) ... Selecting previously deselected package ncurses-base. Unpacking ncurses-base (from .../ncurses-base_5.3.20030719-1_all.deb) ... Selecting previously deselected package ncurses-bin. dpkg: regarding .../ncurses-bin_5.3.20030719-1_i386.deb containing ncurses-bin, pre-dependency problem: ncurses-bin pre-depends on libncurses5 (>= 5.3.20030510-1) libncurses5 is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! Unpacking ncurses-bin (from .../ncurses-bin_5.3.20030719-1_i386.deb) ... Selecting previously deselected package passwd. Unpacking passwd (from .../passwd_1%3a4.0.3-12_i386.deb) ... Preparing to replace perl-base 5.8.0-18 (using .../perl-base_5.8.0-18_i386.deb) ... Unpacking replacement perl-base ... Selecting previously deselected package procps. Unpacking procps (from .../procps_1%3a3.1.14-1_i386.deb) ... Selecting previously deselected package sed. Unpacking sed (from .../archives/sed_4.0.7-3_i386.deb) ... Selecting previously deselected package slang1. Unpacking slang1 (from .../slang1_1.4.9-2_i386.deb) ... Selecting previously deselected package slang1a-utf8. Unpacking slang1a-utf8 (from .../slang1a-utf8_1.4.9-2_i386.deb) ... Selecting previously deselected package initscripts. Unpacking initscripts (from .../initscripts_2.85-7_all.deb) ... Selecting previously deselected package sysvinit. dpkg: regarding .../sysvinit_2.85-7_i386.deb containing sysvinit, pre-dependency problem: sysvinit pre-depends on initscripts initscripts is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! Unpacking sysvinit (from .../sysvinit_2.85-7_i386.deb) ... Selecting previously deselected package sysv-rc. Unpacking sysv-rc (from .../sysv-rc_2.85-7_all.deb) ... Selecting previously deselected package tar. Unpacking tar (from .../tar_1.13.25-6_i386.deb) ... Selecting previously deselected package util-linux. dpkg: regarding .../util-linux_2.12-3_i386.deb containing util-linux, pre-dependency problem: util-linux pre-depends on libncurses5 (>= 5.3.20030510-1) libncurses5 is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../util-linux_2.12-3_i386.deb containing util-linux, pre-dependency problem: util-linux pre-depends on slang1a-utf8 (>> 1.4.4-7.1) slang1a-utf8 is unpacked, but has never been configured. dpkg: warning - ignoring pre-dependency problem ! dpkg: regarding .../util-linux_2.12-3_i386.deb containing util-linux, pre-dependency problem: util-linux pre-depends on zlib1g (>= 1:1.1.4) dpkg: warning - ignoring pre-dependency problem ! Unpacking util-linux (from .../util-linux_2.12-3_i386.deb) ... Selecting previously deselected package whiptail. Unpacking whiptail (from .../whiptail_0.51.4-18_i386.deb) ... Selecting previously deselected package libgcc1. Unpacking libgcc1 (from .../libgcc1_1%3a3.3.2-4_i386.deb) ... Selecting previously deselected package gcc-3.2-base. Unpacking gcc-3.2-base (from .../gcc-3.2-base_1%3a3.2.3-8_i386.deb) ... Selecting previously deselected package gcc-3.3-base. Unpacking gcc-3.3-base (from .../gcc-3.3-base_1%3a3.3.2-4_i386.deb) ... Selecting previously deselected package libstdc++5. Unpacking libstdc++5 (from .../libstdc++5_1%3a3.3.2-4_i386.deb) ... Selecting previously deselected package mbr. Unpacking mbr (from .../archives/mbr_1.1.5-1_i386.deb) ... I: Configuring required packages... Setting up ncurses-base (5.3.20030719-1) ... Setting up sysv-rc (2.85-7) ... Setting up libpam-runtime (0.76-14) ... Setting up gcc-3.2-base (3.2.3-8) ... Setting up gcc-3.3-base (3.3.2-4) ... Setting up libc6 (2.3.2.ds1-10) ... Current default timezone: 'UTC'. Local time is now: Wed Nov 19 23:25:25 UTC 2003. Universal Time is now: Wed Nov 19 23:25:25 UTC 2003. Run 'tzconfig' if you wish to change it. Setting up libcap1 (1.10-12) ... Setting up coreutils (5.0-5) ... Setting up debianutils (2.6) ... Setting up libdb1-compat (2.1.3-7) ... Setting up slang1 (1.4.9-2) ... Setting up libuuid1 (1.34+1.35-WIP-2003.08.21-3) ... Setting up libpopt0 (1.7-2) ... Setting up libpam0g (0.76-14) ... Setting up bsdutils (2.12-3) ... Setting up perl-base (5.8.0-18) ... Setting up mbr (1.1.5-1) ... Setting up tar (1.13.25-6) ... Setting up slang1a-utf8 (1.4.9-2) ... Setting up libgcc1 (3.3.2-4) ... Setting up mount (2.12-3) ... Setting up libncurses5 (5.3.20030719-1) ... Setting up sed (4.0.7-3) ... Setting up e2fslibs (1.34+1.35-WIP-2003.08.21-3) ... Setting up base-passwd (3.5.4) ... Setting up libcomerr2 (1.34+1.35-WIP-2003.08.21-3) ... Setting up mawk (1.3.3-11) ... Setting up libnewt0.51 (0.51.4-18) ... Setting up grep (2.5.1-6) ... Setting up hostname (2.10) ... Setting up libblkid1 (1.34+1.35-WIP-2003.08.21-3) ... Setting up libss2 (1.34+1.35-WIP-2003.08.21-3) ... Setting up findutils (4.1.20-3) ... Setting up e2fsprogs (1.34+1.35-WIP-2003.08.21-3) ... Setting up gzip (1.3.5-7) ... Setting up liblocale-gettext-perl (1.01-17) ... Setting up diff (2.8.1-6) ... Setting up libdb2 (2.7.7.0-8) ... Setting up libdb3 (3.2.9-19) ... Setting up libstdc++5 (3.3.2-4) ... Setting up libtext-charwidth-perl (0.04-1) ... Setting up libtext-wrapi18n-perl (0.06-1) ... Setting up makedev (2.3.1-63) ... Setting up procps (3.1.14-1) ... Setting up ncurses-bin (5.3.20030719-1) ... Setting up whiptail (0.51.4-18) ... Setting up libpam-modules (0.76-14) ... Setting up base-files (3.0.12) ... Setting up dselect (1.10.18) ... Setting up bash (2.05b-12) ... Setting up login (4.0.3-12) ... Setting up passwd (4.0.3-12) ... Setting up dpkg (1.10.18) ... dpkg: debconf-i18n: dependency problems, but configuring anyway as you request: debconf-i18n depends on libtext-iconv-perl; however: Package libtext-iconv-perl is not installed. Setting up debconf-i18n (1.3.20) ... dpkg: util-linux: dependency problems, but configuring anyway as you request: util-linux depends on zlib1g (>= 1:1.1.4); however: Package zlib1g is not installed. Setting up util-linux (2.12-3) ... Setting up debconf (1.3.20) ... Setting up initscripts (2.85-7) ... Setting up sysvinit (2.85-7) ... sysvinit: creating /dev/initctl init: timeout opening/writing control channel /dev/initctl Setting up modutils (2.4.25-3) ... I: Installing base packages... Selecting previously deselected package adduser. (Reading database ... 4253 files and directories currently installed.) Unpacking adduser (from .../archives/adduser_3.51_all.deb) ... Selecting previously deselected package apt. Unpacking apt (from .../archives/apt_0.5.14_i386.deb) ... Selecting previously deselected package apt-utils. Unpacking apt-utils (from .../apt-utils_0.5.14_i386.deb) ... Selecting previously deselected package at. Unpacking at (from .../archives/at_3.1.8-11_i386.deb) ... Selecting previously deselected package base-config. Unpacking base-config (from .../base-config_1.75_all.deb) ... Selecting previously deselected package bsdmainutils. Unpacking bsdmainutils (from .../bsdmainutils_6.0.4_i386.deb) ... Selecting previously deselected package console-common. Unpacking console-common (from .../console-common_0.7.32_all.deb) ... Selecting previously deselected package console-tools. Unpacking console-tools (from .../console-tools_1%3a0.2.3dbs-44_i386.deb) ... Selecting previously deselected package libconsole. Unpacking libconsole (from .../libconsole_1%3a0.2.3dbs-44_i386.deb) ... Selecting previously deselected package console-data. Unpacking console-data (from .../console-data_2002.12.04dbs-21_all.deb) ... Selecting previously deselected package cpio. Unpacking cpio (from .../archives/cpio_2.5-1.1_i386.deb) ... Selecting previously deselected package cron. Unpacking cron (from .../cron_3.0pl1-81_i386.deb) ... Selecting previously deselected package ed. Unpacking ed (from .../archives/ed_0.2-20_i386.deb) ... Selecting previously deselected package exim4. Unpacking exim4 (from .../archives/exim4_4.22-5_all.deb) ... Selecting previously deselected package exim4-base. Unpacking exim4-base (from .../exim4-base_4.22-5_i386.deb) ... Selecting previously deselected package exim4-config. Unpacking exim4-config (from .../exim4-config_4.22-5_all.deb) ... Selecting previously deselected package exim4-daemon-light. Unpacking exim4-daemon-light (from .../exim4-daemon-light_4.22-5_i386.deb) ... Selecting previously deselected package fdutils. Unpacking fdutils (from .../fdutils_5.4-20030718-1_i386.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.12.1-8_i386.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.18.1-12_i386.deb) ... Selecting previously deselected package ifupdown. Unpacking ifupdown (from .../ifupdown_0.6.4-4.6_i386.deb) ... Selecting previously deselected package info. Unpacking info (from .../archives/info_4.6-1_i386.deb) ... Selecting previously deselected package klogd. Unpacking klogd (from .../klogd_1.4.1-10_i386.deb) ... Selecting previously deselected package libident. Unpacking libident (from .../libident_0.22-2.2_i386.deb) ... Selecting previously deselected package libgnutls7. Unpacking libgnutls7 (from .../libgnutls7_0.8.9-2_i386.deb) ... Selecting previously deselected package libssl0.9.7. Unpacking libssl0.9.7 (from .../libssl0.9.7_0.9.7c-5_i386.deb) ... Selecting previously deselected package libgcrypt1. Unpacking libgcrypt1 (from .../libgcrypt1_1.1.12-4_i386.deb) ... Selecting previously deselected package liblzo1. Unpacking liblzo1 (from .../liblzo1_1.08-1_i386.deb) ... Selecting previously deselected package libopencdk4. Unpacking libopencdk4 (from .../libopencdk4_1%3a0.4.2-3_i386.deb) ... Selecting previously deselected package libtasn1-0. Unpacking libtasn1-0 (from .../libtasn1-0_0.1.2-1_i386.deb) ... Selecting previously deselected package zlib1g. Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-16_i386.deb) ... Selecting previously deselected package liblockfile1. Unpacking liblockfile1 (from .../liblockfile1_1.05_i386.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_4.3-3_i386.deb) ... Selecting previously deselected package libsasl2. Unpacking libsasl2 (from .../libsasl2_2.1.12-1_i386.deb) ... Selecting previously deselected package libwrap0. Unpacking libwrap0 (from .../libwrap0_7.6-ipv6.1-3_i386.deb) ... Selecting previously deselected package logrotate. Unpacking logrotate (from .../logrotate_3.6.5-2_i386.deb) ... Selecting previously deselected package mailx. Unpacking mailx (from .../mailx_1%3a8.1.2-0.20031014cvs-1_i386.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.4.2-4_i386.deb) ... Selecting previously deselected package libgdbm3. Unpacking libgdbm3 (from .../libgdbm3_1.8.3-2_i386.deb) ... Selecting previously deselected package manpages. Unpacking manpages (from .../manpages_1.60-3_all.deb) ... Selecting previously deselected package modconf. Unpacking modconf (from .../modconf_0.2.44_all.deb) ... Selecting previously deselected package nano. Unpacking nano (from .../archives/nano_1.2.2-5_i386.deb) ... Selecting previously deselected package net-tools. Unpacking net-tools (from .../net-tools_1.60-8_i386.deb) ... Selecting previously deselected package netbase. Unpacking netbase (from .../archives/netbase_4.14_all.deb) ... Selecting previously deselected package netkit-inetd. Unpacking netkit-inetd (from .../netkit-inetd_0.10-9_i386.deb) ... Selecting previously deselected package iputils-ping. Unpacking iputils-ping (from .../iputils-ping_3%3a20020927-1_i386.deb) ... Selecting previously deselected package nvi. Unpacking nvi (from .../archives/nvi_1.79-21_i386.deb) ... Selecting previously deselected package ppp. Unpacking ppp (from .../ppp_2.4.2+20031002-4_i386.deb) ... Selecting previously deselected package pppconfig. Unpacking pppconfig (from .../pppconfig_2.2.0_all.deb) ... Selecting previously deselected package pppoe. Unpacking pppoe (from .../archives/pppoe_3.5-3_i386.deb) ... Selecting previously deselected package pppoeconf. Unpacking pppoeconf (from .../archives/pppoeconf_1.0_all.deb) ... Selecting previously deselected package libpcap0.7. Unpacking libpcap0.7 (from .../libpcap0.7_0.7.2-4_i386.deb) ... Selecting previously deselected package sysklogd. Unpacking sysklogd (from .../sysklogd_1.4.1-10_i386.deb) ... Selecting previously deselected package tasksel. Unpacking tasksel (from .../archives/tasksel_1.36_i386.deb) ... Selecting previously deselected package libtextwrap1. Unpacking libtextwrap1 (from .../libtextwrap1_0.1-1_i386.deb) ... Selecting previously deselected package tcpd. Unpacking tcpd (from .../tcpd_7.6-ipv6.1-3_i386.deb) ... Selecting previously deselected package telnet. Unpacking telnet (from .../telnet_0.17-21_i386.deb) ... Selecting previously deselected package libtext-iconv-perl. Unpacking libtext-iconv-perl (from .../libtext-iconv-perl_1.2-2_i386.deb) ... Selecting previously deselected package wget. Unpacking wget (from .../archives/wget_1.9-1_i386.deb) ... Selecting previously deselected package lilo. Unpacking lilo (from .../lilo_1%3a22.5.8-5_i386.deb) ... Selecting previously deselected package pciutils. Unpacking pciutils (from .../pciutils_1%3a2.1.11-5_i386.deb) ... Selecting previously deselected package syslinux. Unpacking syslinux (from .../syslinux_2.04-1_i386.deb) ... Selecting previously deselected package psmisc. Unpacking psmisc (from .../psmisc_21.3-1_i386.deb) ... Selecting previously deselected package ipchains. Unpacking ipchains (from .../ipchains_1.3.10-15_i386.deb) ... Selecting previously deselected package iptables. Unpacking iptables (from .../iptables_1.2.9-1_i386.deb) ... Setting up modconf (0.2.44) ... Setting up telnet (0.17-21) ... Setting up gettext-base (0.12.1-8) ... Setting up libgdbm3 (1.8.3-2) ... Setting up libgcrypt1 (1.1.12-4) ... Setting up libtasn1-0 (0.1.2-1) ... Setting up psmisc (21.3-1) ... Setting up libident (0.22-2.2) ... Setting up libssl0.9.7 (0.9.7c-5) ... Setting up apt (0.5.14) ... Setting up fdutils (5.4-20030718-1) ... Keeping old fdmount setuid root settings. Please note that you can run '/usr/sbin/fdutilsconfig' to change them. Setting up pciutils (2.1.11-5) ... Setting up console-data (2002.12.04dbs-21) ... Looking for keymap to install: NONE Setting up zlib1g (1.1.4-16) ... Setting up adduser (3.51) ... Setting up manpages (1.60-3) ... Setting up ed (0.2-20) ... Setting up libtext-iconv-perl (1.2-2) ... Setting up libpcap0.7 (0.7.2-4) ... Setting up liblzo1 (1.08-1) ... Setting up wget (1.9-1) ... Setting up ipchains (1.3.10-15) ... Setting up groff-base (1.18.1-12) ... Setting up net-tools (1.60-8) ... Setting up bsdmainutils (6.0.4) ... Setting up syslinux (2.04-1) ... Setting up libpcre3 (4.3-3) ... Setting up info (4.6-1) ... Setting up libopencdk4 (0.4.2-3) ... Setting up iputils-ping (20020927-1) ... Setting up lilo (22.5.8-5) ... hostname: Unknown host Use of uninitialized value in sprintf at /usr/share/perl5/Debconf/Element/Noninteractive/Note.pm line 38, line 3. Setting up libgnutls7 (0.8.9-2) ... Setting up cron (3.0pl1-81) ... Adding group crontab (101)... Done. Starting periodic command scheduler: cron Warning: Fake start-stop-daemon called, doing nothing . Setting up libsasl2 (2.1.12-1) ... Setting up nano (1.2.2-5) ... Setting up netkit-inetd (0.10-9) ... Starting internet superserver: inetd Warning: Fake start-stop-daemon called, doing nothing . Setting up libconsole (0.2.3dbs-44) ... Setting up apt-utils (0.5.14) ... Setting up iptables (1.2.9-1) ... Setting up cpio (2.5-1.1) ... Setting up nvi (1.79-21) ... Setting up libwrap0 (7.6-ipv6.1-3) ... Setting up liblockfile1 (1.05) ... Setting up tcpd (7.6-ipv6.1-3) ... Setting up man-db (2.4.2-4) ... Building database of manual pages ... mandb: warning: /usr/share/man/man7/mdoc.samples.7.gz is a dangling symlink Setting up console-common (0.7.32) ... Looking for keymap to install: NONE Setting up ifupdown (0.6.4-4.6) ... Setting up logrotate (3.6.5-2) ... Setting up console-tools (0.2.3dbs-44) ... Setting up base-config (1.75) ... Setting up netbase (4.14) ... Setting up ppp (2.4.2+20031002-4) ... Setting up pppoe (3.5-3) ... Setting up pppoeconf (1.0) ... Setting up pppconfig (2.2.0) ... Setting up klogd (1.4.1-10) ... Stopping kernel log daemon: klogd Warning: Fake start-stop-daemon called, doing nothing . Starting kernel log daemon: klogd Warning: Fake start-stop-daemon called, doing nothing . Setting up exim4-config (4.22-5) ... hostname: Unknown host Setting up libtextwrap1 (0.1-1) ... Setting up tasksel (1.36) ... Setting up sysklogd (1.4.1-10) ... Stopping system log daemon: syslogd Warning: Fake start-stop-daemon called, doing nothing . Starting system log daemon: syslogd Warning: Fake start-stop-daemon called, doing nothing . Setting up exim4-base (4.22-5) ... Setting up exim4-daemon-light (4.22-5) ... Starting MTA: Warning: Fake start-stop-daemon called, doing nothing exim4. Setting up mailx (8.1.2-0.20031014cvs-1) ... Setting up at (3.1.8-11) ... Starting deferred execution scheduler: atd Warning: Fake start-stop-daemon called, doing nothing . Setting up exim4 (4.22-5) ... I: Base system installed successfully. chroot /tmp/target dpkg --purge base-config console-common console-tools console-data console-tools-libs (Reading database ... 7000 files and directories currently installed.) Removing base-config ... Purging configuration files for base-config ... Removing console-tools ... Purging configuration files for console-tools ... dpkg - warning: ignoring request to remove console-tools-libs which isn't installed. Removing console-common ... Purging configuration files for console-common ... Removing console-data ... Purging configuration files for console-data ... Using rootstrap module uml from: /usr/lib/rootstrap/modules/uml ./MAKEDEV: warning: can't read /proc/devices Using rootstrap module umount from: /usr/lib/rootstrap/modules/umount umount: /tmp/target/proc: not mounted System halted. tracing thread pid = 18795 Invoking: linux mem=128M eth0=slirp,12345,/usr/bin/slirp-fullbolt con0=fd:0,fd:1 con=pty root=/dev/root rootflags=/ rootfstype=hostfs ubd1=/home/dancer/cvscheckout/pbuilder/pbuilder/testsuite/testimage devfs=mount init=/tmp/fileBP4x7M rw Checking for the skas3 patch in the host...not found Checking for /proc/mm...not found Linux version 2.4.22-5um (dancer@atoron) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 2003年 11月 16日 日曜日 23:07:20 JST On node 0 totalpages: 32768 zone(0): 32768 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: mem=128M eth0=slirp,12345,/usr/bin/slirp-fullbolt con0=fd:0,fd:1 con=pty root=/dev/root rootflags=/ rootfstype=hostfs ubd1=/home/dancer/cvscheckout/pbuilder/pbuilder/testsuite/testimage devfs=mount init=/tmp/fileBP4x7M rw Calibrating delay loop... 1557.89 BogoMIPS Memory: 124716k available Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Checking for host processor cmov support...Yes Checking for host processor xmm support...No Checking that ptrace can change system call numbers...OK Checking that host ptys support output SIGIO...Yes Checking that host ptys support SIGIO on close...No, enabling workaround POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Initializing Cryptographic API Initializing software serial port version 1 setup_etheraddr: failed to parse '/usr/bin/slirp-fullbolt' as an ethernet address Netdevice 0 : SLIRP backend - command line: '/usr/bin/slirp-fullbolt' mconsole (version 2) initialized on /home/dancer/.uml/WOVunq/mconsole unable to open root_fs for validation Partition check: ubdb: unknown partition table Initializing stdio console driver NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (hostfs filesystem). Mounted devfs on /dev Starting network inside the chroot sed: can't read /proc/mounts: No such file or directory sed: can't read /proc/mounts: No such file or directory sed: can't read /proc/mounts: No such file or directory Deconfiguring network interfaces... done. Setting up IP spoofing protection: FAILED. Configuring network interfaces... Slirp v1.0.14pre1 (BETA) Copyright (c) 1995,1996 Danny Gasparovski and others. All rights reserved. This program is copyrighted, free software. Please read the file COPYRIGHT that came with the Slirp package for the terms and conditions of the copyright. IP address of Slirp host: 192.168.1.62 IP address of your DNS(s): 218.231.0.10, 218.231.0.42 Your address is 10.0.2.15 (or anything else you want) Type five zeroes (0) to exit. [autodetect SLIP/CSLIP, MTU 1500, MRU 1500] SLiRP Ready ... done. W: /home/dancer/.pbuilderrc does not exist -> Running in pbuilder-user-mode-linux mode Upgrading for distribution sarge -> copying local configuration -> mounting /proc filesystem -> mounting /dev/pts filesystem -> installing dummy policy-rc.d Refreshing the base.tgz -> upgrading packages 0% [Working] Get:1 http://ring.asahi-net.or.jp sarge/main Packages [2595kB] 0% [1 Packages 2804/2595kB 0%] 37% [1 Packages 961846/2595kB 37%] 63% [1 Packages 1648930/2595kB 63%] 99% [Working] 99% [1 Packages gzip 0] [Waiting for headers] Get:2 http://ring.asahi-net.or.jp sarge/main Release [81B] 99% [1 Packages gzip 2605056] 99% [1 Packages gzip 8245248] 100% [Working] Fetched 2595kB in 2s (1016kB/s) Reading Package Lists... 0% Reading Package Lists... 0% Reading Package Lists... 1% Reading Package Lists... 99% Reading Package Lists... 99% Reading Package Lists... 99% Reading Package Lists... Done (Reading database ... 6270 files and directories currently installed.) Removing lilo ... Purging configuration files for lilo ... Reading Package Lists... 0% Reading Package Lists... 0% Reading Package Lists... 79% Reading Package Lists... Done Building Dependency Tree... 0% Building Dependency Tree... 0% Building Dependency Tree... 50% Building Dependency Tree... 50% Building Dependency Tree... 71% Building Dependency Tree... Done Calculating Upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading Package Lists... 0% Reading Package Lists... 100% Reading Package Lists... Done Building Dependency Tree... 0% Building Dependency Tree... 0% Building Dependency Tree... 50% Building Dependency Tree... 50% Building Dependency Tree... 73% Building Dependency Tree... Done apt is already the newest version. The following extra packages will be installed: binutils cpp cpp-3.3 g++ g++-3.3 gcc gcc-3.3 libc6-dev libdb4.0 libstdc++5-3.3-dev linux-kernel-headers make patch perl perl-modules Suggested packages: gnupg manpages-dev automake flex gdb gcc-3.3-doc glibc-doc libstdc++5-3.3-doc libterm-readline-perl-perl The following NEW packages will be installed: binutils build-essential cpp cpp-3.3 dpkg-dev g++ g++-3.3 gcc gcc-3.3 libc6-dev libdb4.0 libstdc++5-3.3-dev linux-kernel-headers make patch perl perl-modules 0 upgraded, 17 newly installed, 0 to remove and 0 not upgraded. Need to get 18.3MB of archives. After unpacking 60.6MB of additional disk space will be used. 0% [Working] Get:1 http://ring.asahi-net.or.jp sarge/main binutils 2.14.90.0.6-5 [2430kB] 0% [1 binutils 0/2430kB 0%] 3% [1 binutils 689668/2430kB 28%] 5% [1 binutils 1026200/2430kB 42%] 9% [1 binutils 1645686/2430kB 67%] 13% [Working] Get:2 http://ring.asahi-net.or.jp sarge/main cpp-3.3 1:3.3.2-4 [1386kB] 13% [2 cpp-3.3 0/1386kB 0%] 15% [2 cpp-3.3 322512/1386kB 23%] 20% [2 cpp-3.3 1244140/1386kB 89%] 20% [Working] Get:3 http://ring.asahi-net.or.jp sarge/main cpp 4:3.3.1-2 [26.0kB] 20% [3 cpp 0/26.0kB 0%] 21% [Working] Get:4 http://ring.asahi-net.or.jp sarge/main perl-modules 5.8.0-18 [1947kB] 21% [4 perl-modules 0/1947kB 0%] 25% [4 perl-modules 779560/1947kB 40%] 28% [4 perl-modules 1453366/1947kB 74%] 31% [Working] Get:5 http://ring.asahi-net.or.jp sarge/main libdb4.0 4.0.14-1.3 [302kB] 31% [5 libdb4.0 0/302kB 0%] 33% [Working] Get:6 http://ring.asahi-net.or.jp sarge/main perl 5.8.0-18 [3858kB] 33% [6 perl 0/3858kB 0%] 36% [6 perl 578526/3858kB 14%] 37% [6 perl 675428/3858kB 17%] 42% [6 perl 1656242/3858kB 42%] 43% [6 perl 1917424/3858kB 49%] 1251kB/s 8s 47% [6 perl 2656024/3858kB 68%] 1251kB/s 7s 48% [6 perl 2729752/3858kB 70%] 1251kB/s 7s 53% [6 perl 3679420/3858kB 95%] 1251kB/s 6s 54% [Working] 1251kB/s 6s Get:7 http://ring.asahi-net.or.jp sarge/main patch 2.5.9-1 [92.3kB] 54% [7 patch 0/92.3kB 0%] 1251kB/s 6s 54% [Working] 1251kB/s 6s Get:8 http://ring.asahi-net.or.jp sarge/main make 3.80-4 [349kB] 54% [8 make 0/349kB 0%] 1251kB/s 6s 56% [Working] 1251kB/s 6s Get:9 http://ring.asahi-net.or.jp sarge/main dpkg-dev 1.10.18 [115kB] 56% [9 dpkg-dev 0/115kB 0%] 1251kB/s 6s 57% [Working] 1251kB/s 6s Get:10 http://ring.asahi-net.or.jp sarge/main gcc-3.3 1:3.3.2-4 [1327kB] 57% [10 gcc-3.3 0/1327kB 0%] 1251kB/s 6s 59% [10 gcc-3.3 349672/1327kB 26%] 1251kB/s 5s 64% [10 gcc-3.3 1277348/1327kB 96%] 1251kB/s 5s 64% [Working] 1251kB/s 5s Get:11 http://ring.asahi-net.or.jp sarge/main linux-kernel-headers 2.5.999-test7-bk-9 [1374kB] 64% [11 linux-kernel-headers 0/1374kB 0%] 1251kB/s 5s 67% [11 linux-kernel-headers 434616/1374kB 31%] 1251kB/s 4s 72% [Working] 1251kB/s 4s Get:12 http://ring.asahi-net.or.jp sarge/main libc6-dev 2.3.2.ds1-10 [2515kB] 72% [12 libc6-dev 0/2515kB 0%] 1251kB/s 4s 74% [12 libc6-dev 490558/2515kB 19%] 1251kB/s 3s 78% [12 libc6-dev 1191964/2515kB 47%] 1251kB/s 3s 81% [12 libc6-dev 1632188/2515kB 64%] 1251kB/s 2s 86% [Working] 1251kB/s 2s Get:13 http://ring.asahi-net.or.jp sarge/main libstdc++5-3.3-dev 1:3.3.2-4 [768kB] 86% [13 libstdc++5-3.3-dev 0/768kB 0%] 1251kB/s 2s 88% [13 libstdc++5-3.3-dev 418452/768kB 54%] 1251kB/s 1s 90% [Working] 1251kB/s 1s Get:14 http://ring.asahi-net.or.jp sarge/main g++-3.3 1:3.3.2-4 [1766kB] 90% [14 g++-3.3 0/1766kB 0%] 1251kB/s 1s 95% [14 g++-3.3 1000222/1766kB 56%] 1483kB/s 0s 99% [Working] 1483kB/s 0s Get:15 http://ring.asahi-net.or.jp sarge/main g++ 4:3.3.1-2 [1390B] 99% [15 g++ 0/1390B 0%] 1483kB/s 0s 99% [Working] 1483kB/s 0s Get:16 http://ring.asahi-net.or.jp sarge/main gcc 4:3.3.1-2 [4850B] 99% [16 gcc 0/4850B 0%] 1483kB/s 0s 99% [Working] 1483kB/s 0s Get:17 http://ring.asahi-net.or.jp sarge/main build-essential 10 [6450B] 99% [17 build-essential 0/6450B 0%] 1483kB/s 0s 100% [Working] 1483kB/s 0s Fetched 18.3MB in 13s (1394kB/s) Selecting previously deselected package binutils. (Reading database ... 6231 files and directories currently installed.) Unpacking binutils (from .../binutils_2.14.90.0.6-5_i386.deb) ... Selecting previously deselected package cpp-3.3. Unpacking cpp-3.3 (from .../cpp-3.3_1%3a3.3.2-4_i386.deb) ... Selecting previously deselected package cpp. Unpacking cpp (from .../cpp_4%3a3.3.1-2_i386.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.8.0-18_all.deb) ... Selecting previously deselected package libdb4.0. Unpacking libdb4.0 (from .../libdb4.0_4.0.14-1.3_i386.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.8.0-18_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from .../patch_2.5.9-1_i386.deb) ... Selecting previously deselected package make. Unpacking make (from .../archives/make_3.80-4_i386.deb) ... Selecting previously deselected package dpkg-dev. Unpacking dpkg-dev (from .../dpkg-dev_1.10.18_all.deb) ... Selecting previously deselected package gcc-3.3. Unpacking gcc-3.3 (from .../gcc-3.3_1%3a3.3.2-4_i386.deb) ... Selecting previously deselected package linux-kernel-headers. Unpacking linux-kernel-headers (from .../linux-kernel-headers_2.5.999-test7-bk-9_i386.deb) ... Selecting previously deselected package libc6-dev. Unpacking libc6-dev (from .../libc6-dev_2.3.2.ds1-10_i386.deb) ... Selecting previously deselected package libstdc++5-3.3-dev. Unpacking libstdc++5-3.3-dev (from .../libstdc++5-3.3-dev_1%3a3.3.2-4_i386.deb) ... Selecting previously deselected package g++-3.3. Unpacking g++-3.3 (from .../g++-3.3_1%3a3.3.2-4_i386.deb) ... Selecting previously deselected package g++. Unpacking g++ (from .../g++_4%3a3.3.1-2_i386.deb) ... Selecting previously deselected package gcc. Unpacking gcc (from .../gcc_4%3a3.3.1-2_i386.deb) ... Selecting previously deselected package build-essential. Unpacking build-essential (from .../build-essential_10_i386.deb) ... Setting up binutils (2.14.90.0.6-5) ... Setting up cpp-3.3 (3.3.2-4) ... Setting up cpp (3.3.1-2) ... Setting up libdb4.0 (4.0.14-1.3) ... Setting up patch (2.5.9-1) ... Setting up make (3.80-4) ... Setting up gcc-3.3 (3.3.2-4) ... Setting up linux-kernel-headers (2.5.999-test7-bk-9) ... Setting up libc6-dev (2.3.2.ds1-10) ... Setting up gcc (3.3.1-2) ... Setting up libstdc++5-3.3-dev (3.3.2-4) ... Setting up perl-modules (5.8.0-18) ... Setting up g++-3.3 (3.3.2-4) ... Setting up g++ (3.3.1-2) ... Setting up perl (5.8.0-18) ... Setting up dpkg-dev (1.10.18) ... Setting up build-essential (10) ... -> ignoring umount of dev/pts filesystem -> ignoring umount of proc filesystem Kernel panic: Attempted to kill init! tracing thread pid = 20019 -> Successful exit from user-mode linux