dpkg-buildpackage: source package dsh dpkg-buildpackage: source version 0.25.9-1 dpkg-buildpackage: source changed by Junichi Uekawa fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp /usr/bin/make clean make[1]: Entering directory `/TESTDIR/dir2/dsh-0.25.9' make[1]: *** No rule to make target `clean'. Stop. make[1]: Leaving directory `/TESTDIR/dir2/dsh-0.25.9' make: [clean] Error 2 (ignored) /usr/bin/make distclean make[1]: Entering directory `/TESTDIR/dir2/dsh-0.25.9' make[1]: *** No rule to make target `distclean'. Stop. make[1]: Leaving directory `/TESTDIR/dir2/dsh-0.25.9' make: [clean] Error 2 (ignored) dh_clean dpkg-source -b dsh-0.25.9 dpkg-source: building dsh using existing dsh_0.25.9.orig.tar.gz dpkg-source: building dsh in dsh_0.25.9-1.diff.gz dpkg-source: warning: file debian/compat has no final newline (either original or modified version) dpkg-source: warning: file dcp.sh has no final newline (either original or modified version) dpkg-source: building dsh in dsh_0.25.9-1.dsc dpkg-genchanges -S >../dsh_0.25.9-1_source.changes dpkg-genchanges: including full source code in upload dpkg-buildpackage: source only upload (original source is included) W: /home/dancer/.pbuilderrc does not exist I: using fakeroot in build. Current time: TIME pbuilder-time-stamp: XXXX Building the build Environment -> extracting base tarball [/TESTDIR/testimage] -> creating local configuration -> copying local configuration -> mounting /proc filesystem -> mounting /dev/pts filesystem -> policy-rc.d already exists Installing the build-deps -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder and should Depends: debhelper (>> 3.0.0), libdshconfig1-dev (>= 0.20.11-1), po4a dpkg-deb: building package `pbuilder-satisfydepends-dummy' in `/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Reading package lists... Building dependency tree... Reading state information... aptitude is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Selecting previously deselected package pbuilder-satisfydepends-dummy. (Reading database ... 11771 files and directories currently installed.) Unpacking pbuilder-satisfydepends-dummy (from .../pbuilder-satisfydepends-dummy.deb) ... dpkg: dependency problems prevent configuration of pbuilder-satisfydepends-dummy: pbuilder-satisfydepends-dummy depends on debhelper (>> 3.0.0); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on libdshconfig1-dev (>= 0.20.11-1); however: Package libdshconfig1-dev is not installed. pbuilder-satisfydepends-dummy depends on po4a; however: Package po4a is not installed. dpkg: error processing pbuilder-satisfydepends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: pbuilder-satisfydepends-dummy Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Reading task descriptions... Building tag database... The following NEW packages will be automatically installed: debhelper file gettext gettext-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libdshconfig1 libdshconfig1-dev libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsgmls-perl libsp1c2 libterm-readkey-perl po-debconf po4a sp The following NEW packages will be installed: debhelper file gettext gettext-base html2text intltool-debian libcompress-raw-zlib-perl libcompress-zlib-perl libdshconfig1 libdshconfig1-dev libio-compress-base-perl libio-compress-zlib-perl libmagic1 libmail-sendmail-perl libsgmls-perl libsp1c2 libterm-readkey-perl po-debconf po4a sp The following partially installed packages will be configured: pbuilder-satisfydepends-dummy 0 packages upgraded, 20 newly installed, 0 to remove and 0 not upgraded. Need to get 6315kB of archives. After unpacking 21.2MB will be used. Writing extended state information... Get:1 http://cdn.debian.or.jp sid/main libmagic1 4.21-3 [333kB] Get:2 http://cdn.debian.or.jp sid/main file 4.21-3 [40.3kB] Get:3 http://cdn.debian.or.jp sid/main html2text 1.3.2a-3 [92.7kB] Get:4 http://cdn.debian.or.jp sid/main gettext-base 0.16.1-2 [133kB] Get:5 http://cdn.debian.or.jp sid/main gettext 0.16.1-2 [2269kB] Get:6 http://cdn.debian.or.jp sid/main intltool-debian 0.35.0+20060710.1 [30.8kB] Get:7 http://cdn.debian.or.jp sid/main po-debconf 1.0.9 [117kB] Get:8 http://cdn.debian.or.jp sid/main debhelper 5.0.59 [519kB] Get:9 http://cdn.debian.or.jp sid/main libdshconfig1 0.20.13-1 [11.0kB] Get:10 http://cdn.debian.or.jp sid/main libdshconfig1-dev 0.20.13-1 [25.4kB] Get:11 http://cdn.debian.or.jp sid/main libsgmls-perl 1.03ii-31 [29.3kB] Get:12 http://cdn.debian.or.jp sid/main libsp1c2 1.3.4-1.2.1-47 [1386kB] Get:13 http://cdn.debian.or.jp sid/main sp 1.3.4-1.2.1-47 [182kB] Get:14 http://cdn.debian.or.jp sid/main po4a 0.32-1 [762kB] Get:15 http://cdn.debian.or.jp sid/main libcompress-raw-zlib-perl 2.006-1 [94.5kB] Get:16 http://cdn.debian.or.jp sid/main libio-compress-base-perl 2.006-1 [55.1kB] Get:17 http://cdn.debian.or.jp sid/main libio-compress-zlib-perl 2.006-1 [138kB] Get:18 http://cdn.debian.or.jp sid/main libcompress-zlib-perl 2.007-1 [35.4kB] Get:19 http://cdn.debian.or.jp sid/main libmail-sendmail-perl 0.79-4 [27.6kB] Get:20 http://cdn.debian.or.jp sid/main libterm-readkey-perl 2.30-3 [32.6kB] Fetched XXXB in Xs (XXXXXB/s) Selecting previously deselected package libmagic1. (Reading database ... 11771 files and directories currently installed.) Unpacking libmagic1 (from .../libmagic1_4.21-3_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_4.21-3_amd64.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-3_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.16.1-2_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.16.1-2_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.9_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_5.0.59_all.deb) ... Selecting previously deselected package libdshconfig1. Unpacking libdshconfig1 (from .../libdshconfig1_0.20.13-1_amd64.deb) ... Selecting previously deselected package libdshconfig1-dev. Unpacking libdshconfig1-dev (from .../libdshconfig1-dev_0.20.13-1_amd64.deb) ... Selecting previously deselected package libsgmls-perl. Unpacking libsgmls-perl (from .../libsgmls-perl_1.03ii-31_all.deb) ... Selecting previously deselected package libsp1c2. Unpacking libsp1c2 (from .../libsp1c2_1.3.4-1.2.1-47_amd64.deb) ... Selecting previously deselected package sp. Unpacking sp (from .../sp_1.3.4-1.2.1-47_amd64.deb) ... Selecting previously deselected package po4a. Unpacking po4a (from .../archives/po4a_0.32-1_all.deb) ... Selecting previously deselected package libcompress-raw-zlib-perl. Unpacking libcompress-raw-zlib-perl (from .../libcompress-raw-zlib-perl_2.006-1_amd64.deb) ... Selecting previously deselected package libio-compress-base-perl. Unpacking libio-compress-base-perl (from .../libio-compress-base-perl_2.006-1_all.deb) ... Selecting previously deselected package libio-compress-zlib-perl. Unpacking libio-compress-zlib-perl (from .../libio-compress-zlib-perl_2.006-1_all.deb) ... Selecting previously deselected package libcompress-zlib-perl. Unpacking libcompress-zlib-perl (from .../libcompress-zlib-perl_2.007-1_all.deb) ... Selecting previously deselected package libmail-sendmail-perl. Unpacking libmail-sendmail-perl (from .../libmail-sendmail-perl_0.79-4_all.deb) ... Selecting previously deselected package libterm-readkey-perl. Unpacking libterm-readkey-perl (from .../libterm-readkey-perl_2.30-3_amd64.deb) ... Setting up libmagic1 (4.21-3) ... Setting up file (4.21-3) ... Setting up html2text (1.3.2a-3) ... Setting up gettext-base (0.16.1-2) ... Setting up gettext (0.16.1-2) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.9) ... Setting up debhelper (5.0.59) ... Setting up libdshconfig1 (0.20.13-1) ... Setting up libdshconfig1-dev (0.20.13-1) ... Setting up libsgmls-perl (1.03ii-31) ... Setting up libsp1c2 (1.3.4-1.2.1-47) ... Setting up sp (1.3.4-1.2.1-47) ... Setting up po4a (0.32-1) ... Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Setting up libcompress-raw-zlib-perl (2.006-1) ... Setting up libio-compress-base-perl (2.006-1) ... Setting up libio-compress-zlib-perl (2.006-1) ... Setting up libcompress-zlib-perl (2.007-1) ... Setting up libmail-sendmail-perl (0.79-4) ... Setting up libterm-readkey-perl (2.30-3) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Reading task descriptions... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: fakeroot 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 114kB of archives. After unpacking 451kB of additional disk space will be used. Get:1 http://cdn.debian.or.jp sid/main fakeroot 1.8.3 [114kB] Fetched XXXB in Xs (XXXXXB/s) Selecting previously deselected package fakeroot. (Reading database ... 12846 files and directories currently installed.) Unpacking fakeroot (from .../fakeroot_1.8.3_amd64.deb) ... Setting up fakeroot (1.8.3) ... Copying source file -> copying [../dsh_0.25.9-1.dsc] -> copying [../dsh_0.25.9.orig.tar.gz] -> copying [../dsh_0.25.9-1.diff.gz] Extracting source dpkg-source: warning: extracting unsigned source package (./dsh_0.25.9-1.dsc) dpkg-source: extracting dsh in dsh-0.25.9 dpkg-source: unpacking dsh_0.25.9.orig.tar.gz dpkg-source: applying ./dsh_0.25.9-1.diff.gz -> Building the package dpkg-buildpackage: source package dsh dpkg-buildpackage: source version 0.25.9-1 dpkg-buildpackage: source changed by Junichi Uekawa dpkg-buildpackage: host architecture amd64 fakeroot debian/rules clean dh_testdir dh_testroot rm -f build-stamp configure-stamp /usr/bin/make clean make[1]: Entering directory `/tmp/buildd/dsh-0.25.9' make[1]: *** No rule to make target `clean'. Stop. make[1]: Leaving directory `/tmp/buildd/dsh-0.25.9' make: [clean] Error 2 (ignored) /usr/bin/make distclean make[1]: Entering directory `/tmp/buildd/dsh-0.25.9' make[1]: *** No rule to make target `distclean'. Stop. make[1]: Leaving directory `/tmp/buildd/dsh-0.25.9' make: [clean] Error 2 (ignored) dh_clean dpkg-source -b dsh-0.25.9 dpkg-source: building dsh using existing dsh_0.25.9.orig.tar.gz dpkg-source: building dsh in dsh_0.25.9-1.diff.gz dpkg-source: warning: file debian/compat has no final newline (either original or modified version) dpkg-source: warning: file dcp.sh has no final newline (either original or modified version) dpkg-source: building dsh in dsh_0.25.9-1.dsc debian/rules build dh_testdir INSTALL_PROGRAM='install -p -o root -g root -m 755 -s' CFLAGS='-Wall -g -O2' \ ./configure --prefix=/usr --sysconfdir=/etc/dsh --mandir=/usr/share/man checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for strerror in -lcposix... no checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking whether make sets $(MAKE)... (cached) yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for xlf... no checking for f77... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for xlf90... no checking for f90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for xlf95... no checking for f95... no checking for fort... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for an ANSI C-conforming const... yes checking for msgfmt... /usr/bin/msgfmt checking for gmsgfmt... /usr/bin/msgfmt checking for xgettext... /usr/bin/xgettext checking for msgmerge... /usr/bin/msgmerge checking for ld used by GCC... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking for shared library run path origin... done checking whether NLS is requested... yes checking for GNU gettext in libc... yes checking for gettext... yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking for stdlib.h... (cached) yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking for string.h... (cached) yes checking for unistd.h... (cached) yes checking netgroup.h usability... no checking netgroup.h presence... no checking for netgroup.h... no checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking for libdshconfig.h ... yes checking for asprintf... yes checking for strdup... yes checking for getopt_long... yes checking for getline... yes checking for dup2... yes checking for setlocale... yes checking for strcasecmp... yes checking for strchr... yes checking for setnetgrent... yes checking for getnetgrent... yes checking for endnetgrent... yes checking for open_dshconfig in -ldshconfig... yes checking netdb.h has setnetgrent that returns void... no checking getopt with a GNU option reordering extention... yes, disabling configure: creating ./config.status config.status: creating po/Makefile.in config.status: WARNING: po/Makefile.in.in seems to ignore the --datarootdir setting config.status: creating m4/Makefile config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing default-1 commands config.status: creating po/POTFILES config.status: creating po/Makefile touch configure-stamp dh_testdir /usr/bin/make make[1]: Entering directory `/tmp/buildd/dsh-0.25.9' /usr/bin/make all-recursive make[2]: Entering directory `/tmp/buildd/dsh-0.25.9' Making all in m4 make[3]: Entering directory `/tmp/buildd/dsh-0.25.9/m4' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/tmp/buildd/dsh-0.25.9/m4' Making all in po make[3]: Entering directory `/tmp/buildd/dsh-0.25.9/po' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/tmp/buildd/dsh-0.25.9/po' make[3]: Entering directory `/tmp/buildd/dsh-0.25.9' if gcc -DHAVE_CONFIG_H -I. -I. -I. -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-dsh.o -MD -MP -MF ".deps/dsh-dsh.Tpo" -c -o dsh-dsh.o `test -f 'dsh.c' || echo './'`dsh.c; \ then mv -f ".deps/dsh-dsh.Tpo" ".deps/dsh-dsh.Po"; else rm -f ".deps/dsh-dsh.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I. -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-linkedlist.o -MD -MP -MF ".deps/dsh-linkedlist.Tpo" -c -o dsh-linkedlist.o `test -f 'linkedlist.c' || echo './'`linkedlist.c; \ then mv -f ".deps/dsh-linkedlist.Tpo" ".deps/dsh-linkedlist.Po"; else rm -f ".deps/dsh-linkedlist.Tpo"; exit 1; fi if gcc -DHAVE_CONFIG_H -I. -I. -I. -DDSHCONFDIR="\"/etc/dsh\"" -DDSH_COMMANDLINE="\"/usr/bin/dsh\"" -DLOCALEDIR="\"/usr/share/locale\"" -Wall -g -O2 -MT dsh-parameter.o -MD -MP -MF ".deps/dsh-parameter.Tpo" -c -o dsh-parameter.o `test -f 'parameter.c' || echo './'`parameter.c; \ then mv -f ".deps/dsh-parameter.Tpo" ".deps/dsh-parameter.Po"; else rm -f ".deps/dsh-parameter.Tpo"; exit 1; fi /bin/sh ./libtool --tag=CC --mode=link gcc -Wall -g -O2 -o dsh dsh-dsh.o dsh-linkedlist.o dsh-parameter.o -ldshconfig mkdir .libs gcc -Wall -g -O2 -o dsh dsh-dsh.o dsh-linkedlist.o dsh-parameter.o /usr/lib/libdshconfig.so mkdir build-man sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.1 > build-man/dsh.1 sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.5 > build-man/dsh.conf.5 make[3]: Leaving directory `/tmp/buildd/dsh-0.25.9' make[2]: Leaving directory `/tmp/buildd/dsh-0.25.9' make[1]: Leaving directory `/tmp/buildd/dsh-0.25.9' /usr/bin/make check make[1]: Entering directory `/tmp/buildd/dsh-0.25.9' Making check in m4 make[2]: Entering directory `/tmp/buildd/dsh-0.25.9/m4' make[2]: Nothing to be done for `check'. make[2]: Leaving directory `/tmp/buildd/dsh-0.25.9/m4' Making check in po make[2]: Entering directory `/tmp/buildd/dsh-0.25.9/po' make[2]: Nothing to be done for `check'. make[2]: Leaving directory `/tmp/buildd/dsh-0.25.9/po' make[2]: Entering directory `/tmp/buildd/dsh-0.25.9' /usr/bin/make dsh make[3]: Entering directory `/tmp/buildd/dsh-0.25.9' make[3]: `dsh' is up to date. make[3]: Leaving directory `/tmp/buildd/dsh-0.25.9' /usr/bin/make check-TESTS make[3]: Entering directory `/tmp/buildd/dsh-0.25.9' PASS: tests/param-f.sh dsh: File ./tests/nonexistent.file could not be opened for read PASS: tests/param-f-fail.sh PASS: tests/param-f-with-space.sh PASS: tests/param-m.sh test to check that unknown parameter checking is right. ./dsh: unrecognized option `--unknown-parameter' ./dsh: invalid option -- u PASS: tests/param-unknown.sh test1 test2 dsh: Process terminated (before write). PASS: tests/param-i.sh Check that cn4 option is working. PASS: tests/param-cn4.sh test to check that -b0 is rejected, and -b1 is accepted Buffer size needs to be greater than 1 Buffer size needs to be greater than 1 a b PASS: tests/param-b-0.sh dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call success dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call success success success success success b: dsh: Failed executing ./invalid-exec-file with llexec call a: dsh: Failed executing ./invalid-exec-file with llexec call c: dsh: Failed executing ./invalid-exec-file with llexec call d: dsh: Failed executing ./invalid-exec-file with llexec call success dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call dsh: Failed executing ./invalid-exec-file with llexec call success PASS: tests/param-r-invalid.sh 1: 1 2: 2 dsh: fork limit and wait shell cannot be specified at the same time PASS: tests/param-F-invalid.sh Wed Oct 31 03:05:19 UTC 2007 2: Using sleep as the remote shell 2: Show machine names on output 2: Adding machine 5,4,3,2,1 to list 2: Setting forklimit to 3 and wait_shell to 0 2: DUMPing parameters passed to llexec 2: [2] Using sleep as the remote shell Show machine names on output Adding machine 5,4,3,2,1 to list Setting forklimit to 3 and wait_shell to 0 DUMPing parameters passed to llexec [2] 3: Using sleep as the remote shell 3: Show machine names on output 3: Adding machine 5,4,3,2,1 to list 3: Setting forklimit to 3 and wait_shell to 0 3: DUMPing parameters passed to llexec 3: [3] Using sleep as the remote shell Show machine names on output Adding machine 5,4,3,2,1 to list Setting forklimit to 3 and wait_shell to 0 DUMPing parameters passed to llexec [3] 1: Using sleep as the remote shell 1: Show machine names on output 1: Adding machine 5,4,3,2,1 to list 1: Setting forklimit to 3 and wait_shell to 0 1: ... Waiting for process to end with waitpid 1: DUMPing parameters passed to llexec 1: [1] Using sleep as the remote shell Show machine names on output Adding machine 5,4,3,2,1 to list Setting forklimit to 3 and wait_shell to 0 ... Waiting for process to end with waitpid DUMPing parameters passed to llexec [1] 4: Using sleep as the remote shell 4: Show machine names on output 4: Adding machine 5,4,3,2,1 to list 4: Setting forklimit to 3 and wait_shell to 0 4: DUMPing parameters passed to llexec 4: [4] Using sleep as the remote shell Show machine names on output Adding machine 5,4,3,2,1 to list Setting forklimit to 3 and wait_shell to 0 DUMPing parameters passed to llexec [4] 5: Using sleep as the remote shell 5: Show machine names on output 5: Adding machine 5,4,3,2,1 to list 5: Setting forklimit to 3 and wait_shell to 0 5: DUMPing parameters passed to llexec 5: [5] Using sleep as the remote shell Show machine names on output Adding machine 5,4,3,2,1 to list Setting forklimit to 3 and wait_shell to 0 DUMPing parameters passed to llexec [5] --- Terminated running Using sleep as the remote shell Show machine names on output Adding machine 5,4,3,2,1 to list Setting forklimit to 3 and wait_shell to 0 ... Waiting for process to end with waitpid ... Waiting for process to end with waitpid Wed Oct 31 03:05:24 UTC 2007 PASS: tests/param-F-forklimit.sh PASS: tests/param-gnu-getopt.sh PASS: tests/news-okay.sh a: a dsh: Process terminated (before write). b: b c: c PASS: tests/segv-catcher.sh l w PASS: tests/test-bufferoverflow.sh PASS: tests/machinelist-comment-test.sh PASS: tests/machinelist-order.sh =================== All 17 tests passed =================== make[3]: Leaving directory `/tmp/buildd/dsh-0.25.9' make[2]: Leaving directory `/tmp/buildd/dsh-0.25.9' make[1]: Leaving directory `/tmp/buildd/dsh-0.25.9' touch build-stamp fakeroot debian/rules binary dh_testdir dh_testroot dh_clean -k dh_installdirs # Add here commands to install the package into debian/dsh. /usr/bin/make install DESTDIR=/tmp/buildd/dsh-0.25.9/debian/dsh make[1]: Entering directory `/tmp/buildd/dsh-0.25.9' Making install in m4 make[2]: Entering directory `/tmp/buildd/dsh-0.25.9/m4' make[3]: Entering directory `/tmp/buildd/dsh-0.25.9/m4' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/tmp/buildd/dsh-0.25.9/m4' make[2]: Leaving directory `/tmp/buildd/dsh-0.25.9/m4' Making install in po make[2]: Entering directory `/tmp/buildd/dsh-0.25.9/po' /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share mkdir -p -- /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share mkdir -p -- /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/locale/ja/LC_MESSAGES installing ja.gmo as /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/locale/ja/LC_MESSAGES/dsh.mo if test "dsh" = "gettext"; then \ /bin/sh `case "./mkinstalldirs" in /*) echo "./mkinstalldirs" ;; *) echo ".././mkinstalldirs" ;; esac` /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/gettext/po; \ for file in Makefile.in.in Makevars remove-potcdate.sin ; do \ /usr/bin/install -c -m 644 ./$file \ /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/gettext/po/$file; \ done; \ else \ : ; \ fi make[2]: Leaving directory `/tmp/buildd/dsh-0.25.9/po' make[2]: Entering directory `/tmp/buildd/dsh-0.25.9' make[3]: Entering directory `/tmp/buildd/dsh-0.25.9' test -z "/usr/bin" || mkdir -p -- "/tmp/buildd/dsh-0.25.9/debian/dsh/usr/bin" /bin/sh ./libtool --mode=install install -p -o root -g root -m 755 -s 'dsh' '/tmp/buildd/dsh-0.25.9/debian/dsh/usr/bin/dsh' install -p -o root -g root -m 755 -s dsh /tmp/buildd/dsh-0.25.9/debian/dsh/usr/bin/dsh test -z "/etc/dsh" || mkdir -p -- "/tmp/buildd/dsh-0.25.9/debian/dsh/etc/dsh" /usr/bin/install -c -m 644 'dsh.conf' '/tmp/buildd/dsh-0.25.9/debian/dsh/etc/dsh/dsh.conf' for LANGS in ja ; do \ mkdir -p /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/$LANGS/man1 ;\ mkdir -p /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/$LANGS/man5 ;\ sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.$LANGS.1 \ > /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/$LANGS/man1/dsh.1 ; \ sed -e 's,[@]sysconfdir[@],/etc/dsh,' < ./dsh.conf.$LANGS.5 \ > /tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/$LANGS/man5/dsh.conf.5 ; \ done test -z "/usr/share/man/man1" || mkdir -p -- "/tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/man1" /usr/bin/install -c -m 644 './build-man/dsh.1' '/tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/man1/dsh.1' test -z "/usr/share/man/man5" || mkdir -p -- "/tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/man5" /usr/bin/install -c -m 644 './build-man/dsh.conf.5' '/tmp/buildd/dsh-0.25.9/debian/dsh/usr/share/man/man5/dsh.conf.5' make[3]: Leaving directory `/tmp/buildd/dsh-0.25.9' make[2]: Leaving directory `/tmp/buildd/dsh-0.25.9' make[1]: Leaving directory `/tmp/buildd/dsh-0.25.9' cp /tmp/buildd/dsh-0.25.9/debian/machines.list /tmp/buildd/dsh-0.25.9/debian/dsh/etc/dsh/machines.list cp /tmp/buildd/dsh-0.25.9/dsh.conf /tmp/buildd/dsh-0.25.9/debian/dsh/etc/dsh/dsh.conf ln -s ../machines.list /tmp/buildd/dsh-0.25.9/debian/dsh/etc/dsh/group/all install -d /tmp/buildd/dsh-0.25.9/debian/dsh/usr/lib/update-cluster install -m 755 /tmp/buildd/dsh-0.25.9/debian/dsh.updatelist /tmp/buildd/dsh-0.25.9/debian/dsh/usr/lib/update-cluster/ dh_testdir dh_testroot dh_installdocs NEWS dh_installexamples dh_installmenu dh_installman dh_installchangelogs ChangeLog dh_link dh_strip dh_shlibdeps dh_compress dh_fixperms dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package `dsh' in `../dsh_0.25.9-1_amd64.deb'. dpkg-genchanges >../dsh_0.25.9-1_amd64.changes dpkg-genchanges: including full source code in upload dpkg-buildpackage: full upload (original source is included) -> unmounting dev/pts filesystem -> unmounting proc filesystem -> cleaning the build env -> removing directory /TESTDIR/dir3/NUM and its subdirectories Current time: TIME pbuilder-time-stamp: XXXX