I: Upgrading for distribution sid I: Building the build Environment I: extracting base tarball [/TESTDIR/testimage] I: creating local configuration I: copying local configuration I: Installing apt-lines I: mounting /proc filesystem I: mounting /dev/pts filesystem I: policy-rc.d already exists I: Refreshing the base.tgz I: upgrading packages Get:1 http://localhost sid Release.gpg [835B] Get:2 http://localhost sid Release [100kB] Ign http://localhost sid/main Packages Get:3 http://localhost sid/main Packages [7938kB] Fetched XXXB in Xs (XXXXXB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: insserv libc-bin libc-dev-bin The following packages will be upgraded: apt aptitude binutils bsdutils cpp-4.3 debianutils e2fslibs e2fsprogs g++-4.3 gcc-4.3 gcc-4.3-base gcc-4.4-base initscripts libblkid1 libc6 libc6-dev libcomerr2 libept0 libgcc1 libgomp1 libselinux1 libsepol1 libss2 libstdc++6 libstdc++6-4.3-dev libuuid1 linux-libc-dev mount sysv-rc sysvinit sysvinit-utils tar tzdata util-linux 34 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 33.7MB of archives. After this operation, 344kB of additional disk space will be used. Get:1 http://localhost sid/main debianutils 3.2.1 [49.0kB] Get:2 http://localhost sid/main libc-bin 2.9-24 [709kB] Get:3 http://localhost sid/main libc-dev-bin 2.9-24 [195kB] Get:4 http://localhost sid/main linux-libc-dev 2.6.30-6 [809kB] Get:5 http://localhost sid/main libc6-dev 2.9-24 [2505kB] Get:6 http://localhost sid/main libgomp1 4.4.1-2 [25.3kB] Get:7 http://localhost sid/main gcc-4.4-base 4.4.1-2 [110kB] Get:8 http://localhost sid/main libgcc1 1:4.4.1-2 [53.1kB] Get:9 http://localhost sid/main libstdc++6 4.4.1-2 [341kB] Get:10 http://localhost sid/main libc6 2.9-24 [4188kB] Get:11 http://localhost sid/main e2fslibs 1.41.8-2 [140kB] Get:12 http://localhost sid/main e2fsprogs 1.41.8-2 [809kB] Get:13 http://localhost sid/main libuuid1 2.16-3 [55.6kB] Get:14 http://localhost sid/main libblkid1 2.16-3 [85.0kB] Get:15 http://localhost sid/main mount 2.16-3 [169kB] Get:16 http://localhost sid/main libselinux1 2.0.85-1 [83.1kB] Get:17 http://localhost sid/main libsepol1 2.0.37-1 [127kB] Get:18 http://localhost sid/main sysvinit 2.87dsf-2 [107kB] Get:19 http://localhost sid/main tar 1.22-2 [881kB] Get:20 http://localhost sid/main tzdata 2009k-3 [767kB] Get:21 http://localhost sid/main util-linux 2.16-3 [622kB] Get:22 http://localhost sid/main bsdutils 1:2.16-3 [76.8kB] Get:23 http://localhost sid/main sysvinit-utils 2.87dsf-2 [106kB] Get:24 http://localhost sid/main libept0 0.5.27 [206kB] Get:25 http://localhost sid/main aptitude 0.4.11.11-1+b2 [3067kB] Get:26 http://localhost sid/main apt 0.7.22.2 [1637kB] Get:27 http://localhost sid/main initscripts 2.87dsf-2 [78.2kB] Get:28 http://localhost sid/main libcomerr2 1.41.8-2 [45.9kB] Get:29 http://localhost sid/main libss2 1.41.8-2 [51.4kB] Get:30 http://localhost sid/main insserv 1.12.0-10 [70.9kB] Get:31 http://localhost sid/main sysv-rc 2.87dsf-2 [70.9kB] Get:32 http://localhost sid/main libstdc++6-4.3-dev 4.3.4-1 [1384kB] Get:33 http://localhost sid/main g++-4.3 4.3.4-1 [4794kB] Get:34 http://localhost sid/main gcc-4.3 4.3.4-1 [2594kB] Get:35 http://localhost sid/main cpp-4.3 4.3.4-1 [3348kB] Get:36 http://localhost sid/main binutils 2.19.51.20090805-1 [3219kB] Get:37 http://localhost sid/main gcc-4.3-base 4.3.4-1 [107kB] debconf: delaying package configuration, since apt-utils is not installed Fetched XXXB in Xs (XXXXXB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9843 files and directories currently installed.) Preparing to replace debianutils 3.2 (using .../debianutils_3.2.1_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (3.2.1) ... Selecting previously deselected package libc-bin. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9843 files and directories currently installed.) Unpacking libc-bin (from .../libc-bin_2.9-24_amd64.deb) ... Replacing files in old package libc6 ... Setting up libc-bin (2.9-24) ... Selecting previously deselected package libc-dev-bin. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9849 files and directories currently installed.) Unpacking libc-dev-bin (from .../libc-dev-bin_2.9-24_amd64.deb) ... Replacing files in old package libc6-dev ... Preparing to replace linux-libc-dev 2.6.30-5 (using .../linux-libc-dev_2.6.30-6_amd64.deb) ... Unpacking replacement linux-libc-dev ... Preparing to replace libc6-dev 2.9-23 (using .../libc6-dev_2.9-24_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libgomp1 4.4.1-1 (using .../libgomp1_4.4.1-2_amd64.deb) ... Unpacking replacement libgomp1 ... Preparing to replace gcc-4.4-base 4.4.1-1 (using .../gcc-4.4-base_4.4.1-2_amd64.deb) ... Unpacking replacement gcc-4.4-base ... Setting up gcc-4.4-base (4.4.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace libgcc1 1:4.4.1-1 (using .../libgcc1_1%3a4.4.1-2_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace libstdc++6 4.4.1-1 (using .../libstdc++6_4.4.1-2_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.1-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace libc6 2.9-23 (using .../libc6_2.9-24_amd64.deb) ... Unpacking replacement libc6 ... Setting up libc6 (2.9-24) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.8-2_amd64.deb) ... Unpacking replacement e2fslibs ... Setting up e2fslibs (1.41.8-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.8-2_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.41.8-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9856 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.16-3_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.16-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9856 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.16-3_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.16-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9857 files and directories currently installed.) Preparing to replace mount 2.15.1~rc1-1 (using .../mount_2.16-3_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.16-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9857 files and directories currently installed.) Preparing to replace libselinux1 2.0.82-1 (using .../libselinux1_2.0.85-1_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.85-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9857 files and directories currently installed.) Preparing to replace libsepol1 2.0.36-1 (using .../libsepol1_2.0.37-1_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.37-1) ... telinit: timeout opening/writing control channel /dev/initctl (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9857 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-65 (using .../sysvinit_2.87dsf-2_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.87dsf-2) ... init: timeout opening/writing control channel /dev/initctl (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace tar 1.22-1.1 (using .../archives/tar_1.22-2_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.22-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace tzdata 2009k-2 (using .../tzdata_2009k-3_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2009k-3) ... Current default time zone: 'Etc/UTC' Local time is now: XXXX Universal Time is now: XXXX Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9855 files and directories currently installed.) Preparing to replace util-linux 2.15.1~rc1-1 (using .../util-linux_2.16-3_amd64.deb) ... Unpacking replacement util-linux ... Replacing files in old package e2fsprogs ... Setting up util-linux (2.16-3) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9857 files and directories currently installed.) Preparing to replace bsdutils 1:2.15.1~rc1-1 (using .../bsdutils_1%3a2.16-3_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.16-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9857 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-65 (using .../sysvinit-utils_2.87dsf-2_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.87dsf-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9859 files and directories currently installed.) Preparing to replace libept0 0.5.26+b1 (using .../libept0_0.5.27_amd64.deb) ... Unpacking replacement libept0 ... Preparing to replace aptitude 0.4.11.11-1+b1 (using .../aptitude_0.4.11.11-1+b2_amd64.deb) ... Unpacking replacement aptitude ... Preparing to replace apt 0.7.21 (using .../apt_0.7.22.2_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.7.22.2) ... Installing new version of config file /etc/cron.daily/apt ... gpg: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) " not changed gpg: key ADB11277: "Etch Stable Release Key " not changed gpg: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: Total number processed: 6 gpg: unchanged: 6 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9860 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-65 (using .../initscripts_2.87dsf-2_amd64.deb) ... Unpacking replacement initscripts ... Setting up initscripts (2.87dsf-2) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/bootlogs ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9860 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.8-2_amd64.deb) ... Unpacking replacement libcomerr2 ... Setting up libcomerr2 (1.41.8-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9860 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.8-2_amd64.deb) ... Unpacking replacement libss2 ... Setting up libss2 (1.41.8-2) ... Selecting previously deselected package insserv. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9860 files and directories currently installed.) Unpacking insserv (from .../insserv_1.12.0-10_amd64.deb) ... Setting up insserv (1.12.0-10) ... info: Checking if it is safe to convert to dependency based boot. info: It is safe to convert to dependency based boot. info: Checking if it is safe to convert to dependency based boot. info: Backing up existing boot scripts in /var/lib/insserv/bootscripts-20090815T2336.tar.gz info: Reordering boot system, log to /var/lib/insserv/run-20090815T2336.log info: Recording new boot sequence in /var/lib/insserv/bootscripts-20090815T2336-after.list info: Use '/usr/sbin/update-bootsystem-insserv restore' to restore the old boot sequence. Adding `diversion of /usr/sbin/update-rc.d to /usr/sbin/update-rc.d.distrib by insserv' success: Boot system successfully converted (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9889 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-65 (using .../sysv-rc_2.87dsf-2_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.87dsf-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9890 files and directories currently installed.) Preparing to replace libstdc++6-4.3-dev 4.3.3-14 (using .../libstdc++6-4.3-dev_4.3.4-1_amd64.deb) ... Unpacking replacement libstdc++6-4.3-dev ... Preparing to replace g++-4.3 4.3.3-14 (using .../g++-4.3_4.3.4-1_amd64.deb) ... Unpacking replacement g++-4.3 ... Preparing to replace gcc-4.3 4.3.3-14 (using .../gcc-4.3_4.3.4-1_amd64.deb) ... Unpacking replacement gcc-4.3 ... Preparing to replace cpp-4.3 4.3.3-14 (using .../cpp-4.3_4.3.4-1_amd64.deb) ... Unpacking replacement cpp-4.3 ... Preparing to replace binutils 2.19.51.20090723-1 (using .../binutils_2.19.51.20090805-1_amd64.deb) ... Unpacking replacement binutils ... Preparing to replace gcc-4.3-base 4.3.3-14 (using .../gcc-4.3-base_4.3.4-1_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Setting up libc-dev-bin (2.9-24) ... Setting up linux-libc-dev (2.6.30-6) ... Setting up libc6-dev (2.9-24) ... Setting up libgomp1 (4.4.1-2) ... Setting up libept0 (0.5.27) ... Setting up aptitude (0.4.11.11-1+b2) ... Setting up gcc-4.3-base (4.3.4-1) ... Setting up cpp-4.3 (4.3.4-1) ... Setting up binutils (2.19.51.20090805-1) ... Setting up gcc-4.3 (4.3.4-1) ... Setting up libstdc++6-4.3-dev (4.3.4-1) ... Setting up g++-4.3 (4.3.4-1) ... Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version. dpkg-dev is already the newest version. apt is already the newest version. apt set to manually installed. aptitude is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: user script /var/cache/pbuilder/build//NUM/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh starting umount: /sys: not mounted umount: /run: not found umount: /proc/bus/usb: not mounted umount: /dev/shm: not mounted umount: /lib/init/rw: not mounted cat: /var/run/inetd.pid: No such file or directory kill: 20: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or kill -l [exitstatus] I: user script /var/cache/pbuilder/build//NUM/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished I: unmounting dev/pts filesystem I: unmounting proc filesystem I: creating base tarball [/TESTDIR/testimage] I: cleaning the build env I: removing directory /var/cache/pbuilder/build//NUM and its subdirectories