I: Upgrading for distribution squeeze I: Building the build Environment I: extracting base tarball [/TESTDIR/testimage] I: creating local configuration I: copying local configuration I: Installing apt-lines I: mounting /proc filesystem I: mounting /dev/pts filesystem I: policy-rc.d already exists I: Refreshing the base.tgz I: upgrading packages Get:1 http://localhost squeeze Release.gpg [835B] Get:2 http://localhost squeeze Release [89.5kB] Ign http://localhost squeeze/main Packages Get:3 http://localhost squeeze/main Packages [7916kB] Fetched XXXB in Xs (XXXXXB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: dash diffutils gcc-4.4-base insserv libc-bin libc-dev-bin libdb4.7 liblzma0 libreadline6 sensible-utils xz-utils The following packages will be upgraded: apt aptitude base-files base-passwd bash binutils bsdutils bzip2 coreutils cpio cpp cpp-4.3 debconf debconf-i18n debianutils diff dpkg dpkg-dev e2fslibs e2fsprogs fakeroot findutils g++ g++-4.3 gcc gcc-4.3 gcc-4.3-base gnupg gpgv grep gzip hostname initscripts libacl1 libattr1 libblkid1 libbz2-1.0 libc6 libc6-dev libcomerr2 libcwidget3 libdb4.6 libept0 libgcc1 libgdbm3 libgmp3c2 libgomp1 liblocale-gettext-perl libmpfr1ldbl libncurses5 libncursesw5 libpam-modules libpam-runtime libpam0g libreadline5 libselinux1 libsepol1 libslang2 libss2 libstdc++6 libstdc++6-4.3-dev libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libtimedate-perl libuuid1 libxapian15 linux-libc-dev login lsb-base make mawk mktemp mount ncurses-base ncurses-bin passwd perl perl-base perl-modules readline-common sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux zlib1g 89 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. Need to get 65.7MB of archives. After this operation, 12.2MB of additional disk space will be used. Get:1 http://localhost squeeze/main libc-dev-bin 2.10.1-7 [200kB] Get:2 http://localhost squeeze/main libc6-dev 2.10.1-7 [2546kB] Get:3 http://localhost squeeze/main libc-bin 2.10.1-7 [727kB] Get:4 http://localhost squeeze/main libc6 2.10.1-7 [4244kB] Get:5 http://localhost squeeze/main linux-libc-dev 2.6.30-8 [827kB] Get:6 http://localhost squeeze/main gcc-4.4-base 4.4.2-3 [113kB] Get:7 http://localhost squeeze/main libgcc1 1:4.4.2-3 [44.8kB] Get:8 http://localhost squeeze/main base-passwd 3.5.22 [41.9kB] Get:9 http://localhost squeeze/main base-files 5.0.0 [70.3kB] Get:10 http://localhost squeeze/main sensible-utils 0.0.1 [4442B] Get:11 http://localhost squeeze/main debianutils 3.2.2 [49.1kB] Get:12 http://localhost squeeze/main bash 4.0-4 [1154kB] Get:13 http://localhost squeeze/main coreutils 7.4-2 [4883kB] Get:14 http://localhost squeeze/main diffutils 1:2.8.1-18 [193kB] Get:15 http://localhost squeeze/main dpkg 1.15.5.2 [2223kB] Get:16 http://localhost squeeze/main e2fslibs 1.41.9-1 [141kB] Get:17 http://localhost squeeze/main e2fsprogs 1.41.9-1 [796kB] Get:18 http://localhost squeeze/main findutils 4.4.2-1 [689kB] Get:19 http://localhost squeeze/main grep 2.5.4-4 [317kB] Get:20 http://localhost squeeze/main gzip 1.3.12-8 [107kB] Get:21 http://localhost squeeze/main hostname 3.01 [14.2kB] Get:22 http://localhost squeeze/main login 1:4.1.4.2-1 [755kB] Get:23 http://localhost squeeze/main libselinux1 2.0.88-1 [85.0kB] Get:24 http://localhost squeeze/main perl-modules 5.10.1-8 [3478kB] Get:25 http://localhost squeeze/main libdb4.7 4.7.25-8 [650kB] Get:26 http://localhost squeeze/main bzip2 1.0.5-3 [48.6kB] Get:27 http://localhost squeeze/main libbz2-1.0 1.0.5-3 [45.4kB] Get:28 http://localhost squeeze/main libgdbm3 1.8.3-8 [46.1kB] Get:29 http://localhost squeeze/main zlib1g 1:1.2.3.3.dfsg-15 [75.8kB] Get:30 http://localhost squeeze/main perl 5.10.1-8 [4417kB] Get:31 http://localhost squeeze/main perl-base 5.10.1-8 [1086kB] Get:32 http://localhost squeeze/main liblocale-gettext-perl 1.05-6 [21.6kB] Get:33 http://localhost squeeze/main libtext-iconv-perl 1.7-2 [18.5kB] Get:34 http://localhost squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB] Get:35 http://localhost squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B] Get:36 http://localhost squeeze/main debconf-i18n 1.5.28 [178kB] Get:37 http://localhost squeeze/main debconf 1.5.28 [149kB] Get:38 http://localhost squeeze/main libpam0g 1.1.0-4 [116kB] Get:39 http://localhost squeeze/main libpam-modules 1.1.0-4 [351kB] Get:40 http://localhost squeeze/main passwd 1:4.1.4.2-1 [1054kB] Get:41 http://localhost squeeze/main libuuid1 2.16.1-4 [56.7kB] Get:42 http://localhost squeeze/main libblkid1 2.16.1-4 [86.2kB] Get:43 http://localhost squeeze/main mount 2.16.1-4 [170kB] Get:44 http://localhost squeeze/main ncurses-bin 5.7+20090803-2 [312kB] Get:45 http://localhost squeeze/main sed 4.2.1-4 [251kB] Get:46 http://localhost squeeze/main sysvinit-utils 2.87dsf-8 [110kB] Get:47 http://localhost squeeze/main libsepol1 2.0.40-2 [129kB] Get:48 http://localhost squeeze/main sysvinit 2.87dsf-8 [112kB] Get:49 http://localhost squeeze/main tar 1.22-2 [881kB] Get:50 http://localhost squeeze/main lsb-base 3.2-23 [20.0kB] Get:51 http://localhost squeeze/main tzdata 2009s-1 [765kB] Get:52 http://localhost squeeze/main initscripts 2.87dsf-8 [64.0kB] Get:53 http://localhost squeeze/main insserv 1.12.0-14 [68.7kB] Get:54 http://localhost squeeze/main sysv-rc 2.87dsf-8 [54.2kB] Get:55 http://localhost squeeze/main util-linux 2.16.1-4 [623kB] Get:56 http://localhost squeeze/main dash 0.5.5.1-3 [101kB] Get:57 http://localhost squeeze/main diff 1:2.8.1-18 [5842B] Get:58 http://localhost squeeze/main mktemp 7.4-2 [13.9kB] Get:59 http://localhost squeeze/main bsdutils 1:2.16.1-4 [78.0kB] Get:60 http://localhost squeeze/main libncurses5 5.7+20090803-2 [355kB] Get:61 http://localhost squeeze/main ncurses-base 5.7+20090803-2 [182kB] Get:62 http://localhost squeeze/main mawk 1.3.3-15 [90.1kB] Get:63 http://localhost squeeze/main libstdc++6 4.4.2-3 [342kB] Get:64 http://localhost squeeze/main libxapian15 1.0.16-3 [815kB] Get:65 http://localhost squeeze/main libept0 0.5.29 [204kB] Get:66 http://localhost squeeze/main libncursesw5 5.7+20090803-2 [379kB] Get:67 http://localhost squeeze/main libcwidget3 0.5.13-1 [309kB] Get:68 http://localhost squeeze/main aptitude 0.4.11.11-1+b2 [3067kB] Get:69 http://localhost squeeze/main apt 0.7.23.1 [1652kB] Get:70 http://localhost squeeze/main readline-common 6.0-5 [51.9kB] Get:71 http://localhost squeeze/main libreadline6 6.0-5 [152kB] Get:72 http://localhost squeeze/main gpgv 1.4.10-2 [218kB] Get:73 http://localhost squeeze/main gnupg 1.4.10-2 [2137kB] Get:74 http://localhost squeeze/main libattr1 1:2.4.44-1 [12.7kB] Get:75 http://localhost squeeze/main libacl1 2.2.48-1 [19.2kB] Get:76 http://localhost squeeze/main libcomerr2 1.41.9-1 [46.4kB] Get:77 http://localhost squeeze/main libpam-runtime 1.1.0-4 [219kB] Get:78 http://localhost squeeze/main libslang2 2.2.1-1 [539kB] Get:79 http://localhost squeeze/main libss2 1.41.9-1 [51.9kB] Get:80 http://localhost squeeze/main cpio 2.10-1 [245kB] Get:81 http://localhost squeeze/main libreadline5 5.2-7 [146kB] Get:82 http://localhost squeeze/main libgomp1 4.4.2-3 [25.3kB] Get:83 http://localhost squeeze/main libgmp3c2 2:4.3.1+dfsg-3 [307kB] Get:84 http://localhost squeeze/main libmpfr1ldbl 2.4.1-2 [419kB] Get:85 http://localhost squeeze/main libstdc++6-4.3-dev 4.3.4-6 [1384kB] Get:86 http://localhost squeeze/main g++-4.3 4.3.4-6 [4804kB] Get:87 http://localhost squeeze/main gcc-4.3 4.3.4-6 [2595kB] Get:88 http://localhost squeeze/main cpp-4.3 4.3.4-6 [3349kB] Get:89 http://localhost squeeze/main binutils 2.20-4 [3300kB] Get:90 http://localhost squeeze/main gcc-4.3-base 4.3.4-6 [108kB] Get:91 http://localhost squeeze/main libdb4.6 4.6.21-14 [590kB] Get:92 http://localhost squeeze/main cpp 4:4.3.3-9+nmu1 [14.5kB] Get:93 http://localhost squeeze/main liblzma0 4.999.9beta+20091004-1 [146kB] Get:94 http://localhost squeeze/main xz-utils 4.999.9beta+20091004-1 [223kB] Get:95 http://localhost squeeze/main make 3.81-7 [404kB] Get:96 http://localhost squeeze/main libtimedate-perl 1.1900-1 [40.5kB] Get:97 http://localhost squeeze/main dpkg-dev 1.15.5.2 [756kB] Get:98 http://localhost squeeze/main fakeroot 1.14.4-1 [100kB] Get:99 http://localhost squeeze/main gcc 4:4.3.3-9+nmu1 [5032B] Get:100 http://localhost squeeze/main g++ 4:4.3.3-9+nmu1 [1386B] debconf: delaying package configuration, since apt-utils is not installed Fetched XXXB in Xs (XXXXXB/s) Selecting previously deselected package libc-dev-bin. (Reading database ... 9634 files and directories currently installed.) Unpacking libc-dev-bin (from .../libc-dev-bin_2.10.1-7_amd64.deb) ... Replacing files in old package libc6-dev ... Preparing to replace libc6-dev 2.7-18 (using .../libc6-dev_2.10.1-7_amd64.deb) ... Unpacking replacement libc6-dev ... Selecting previously deselected package libc-bin. dpkg: considering deconfiguration of libc6, which would be broken by installation of libc-bin ... dpkg: yes, will deconfigure libc6 (broken by libc-bin). Unpacking libc-bin (from .../libc-bin_2.10.1-7_amd64.deb) ... De-configuring libc6 ... Replacing files in old package libc6 ... Setting up libc-bin (2.10.1-7) ... Installing new version of config file /etc/gai.conf ... Installing new version of config file /etc/bindresvport.blacklist ... (Reading database ... 9660 files and directories currently installed.) Preparing to replace libc6 2.7-18 (using .../libc6_2.10.1-7_amd64.deb) ... Removing obsolete conffile /etc/init.d/glibc.sh ... Checking for services that may need to be restarted... Checking init scripts... Unpacking replacement libc6 ... Setting up libc6 (2.10.1-7) ... Checking for services that may need to be restarted... Checking init scripts... Nothing to restart. (Reading database ... 9655 files and directories currently installed.) Preparing to replace linux-libc-dev 2.6.26-19 (using .../linux-libc-dev_2.6.30-8_amd64.deb) ... Unpacking replacement linux-libc-dev ... Selecting previously deselected package gcc-4.4-base. Unpacking gcc-4.4-base (from .../gcc-4.4-base_4.4.2-3_amd64.deb) ... Setting up gcc-4.4-base (4.4.2-3) ... (Reading database ... 9749 files and directories currently installed.) Preparing to replace libgcc1 1:4.3.2-1.1 (using .../libgcc1_1%3a4.4.2-3_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.4.2-3) ... (Reading database ... 9749 files and directories currently installed.) Preparing to replace base-passwd 3.5.20 (using .../base-passwd_3.5.22_amd64.deb) ... Unpacking replacement base-passwd ... Setting up base-passwd (3.5.22) ... (Reading database ... 9749 files and directories currently installed.) Preparing to replace base-files 5lenny4 (using .../base-files_5.0.0_amd64.deb) ... Unpacking replacement base-files ... Replacing files in old package dpkg ... Setting up base-files (5.0.0) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Selecting previously deselected package sensible-utils. (Reading database ... 9748 files and directories currently installed.) Unpacking sensible-utils (from .../sensible-utils_0.0.1_all.deb) ... Replacing files in old package debianutils ... Setting up sensible-utils (0.0.1) ... (Reading database ... 9752 files and directories currently installed.) Preparing to replace debianutils 2.30 (using .../debianutils_3.2.2_amd64.deb) ... Unpacking replacement debianutils ... Setting up debianutils (3.2.2) ... (Reading database ... 9748 files and directories currently installed.) Preparing to replace bash 3.2-4 (using .../archives/bash_4.0-4_amd64.deb) ... Unpacking replacement bash ... Setting up bash (4.0-4) ... Installing new version of config file /etc/skel/.bashrc ... Installing new version of config file /etc/bash.bashrc ... (Reading database ... 9769 files and directories currently installed.) Preparing to replace coreutils 6.10-6 (using .../coreutils_7.4-2_amd64.deb) ... Unpacking replacement coreutils ... Replacing files in old package mktemp ... Setting up coreutils (7.4-2) ... Selecting previously deselected package diffutils. (Reading database ... 9776 files and directories currently installed.) Unpacking diffutils (from .../diffutils_1%3a2.8.1-18_amd64.deb) ... Replacing files in old package diff ... Setting up diffutils (1:2.8.1-18) ... (Reading database ... 9781 files and directories currently installed.) Preparing to replace dpkg 1.14.25 (using .../dpkg_1.15.5.2_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.15.5.2) ... Installing new version of config file /etc/logrotate.d/dpkg ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9778 files and directories currently installed.) Preparing to replace e2fslibs 1.41.3-1 (using .../e2fslibs_1.41.9-1_amd64.deb) ... Unpacking replacement e2fslibs ... Setting up e2fslibs (1.41.9-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9778 files and directories currently installed.) Preparing to replace e2fsprogs 1.41.3-1 (using .../e2fsprogs_1.41.9-1_amd64.deb) ... Unpacking replacement e2fsprogs ... Setting up e2fsprogs (1.41.9-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9775 files and directories currently installed.) Preparing to replace findutils 4.4.0-2 (using .../findutils_4.4.2-1_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. Unpacking replacement findutils ... Setting up findutils (4.4.2-1) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package findutils should be updated. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9777 files and directories currently installed.) Preparing to replace grep 2.5.3~dfsg-6 (using .../grep_2.5.4-4_amd64.deb) ... Unpacking replacement grep ... Setting up grep (2.5.4-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9778 files and directories currently installed.) Preparing to replace gzip 1.3.12-6 (using .../gzip_1.3.12-8_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. Unpacking replacement gzip ... Setting up gzip (1.3.12-8) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package gzip should be updated. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9778 files and directories currently installed.) Preparing to replace hostname 2.95 (using .../hostname_3.01_amd64.deb) ... Unpacking replacement hostname ... Setting up hostname (3.01) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9784 files and directories currently installed.) Preparing to replace login 1:4.1.1-6 (using .../login_1%3a4.1.4.2-1_amd64.deb) ... Unpacking replacement login ... Setting up login (1:4.1.4.2-1) ... Installing new version of config file /etc/login.defs ... Installing new version of config file /etc/securetty ... Installing new version of config file /etc/pam.d/login ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9783 files and directories currently installed.) Preparing to replace libselinux1 2.0.65-5 (using .../libselinux1_2.0.88-1_amd64.deb) ... Unpacking replacement libselinux1 ... Setting up libselinux1 (2.0.88-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9783 files and directories currently installed.) Preparing to replace perl-modules 5.10.0-19lenny2 (using .../perl-modules_5.10.1-8_all.deb) ... Unpacking replacement perl-modules ... Selecting previously deselected package libdb4.7. Unpacking libdb4.7 (from .../libdb4.7_4.7.25-8_amd64.deb) ... Setting up libdb4.7 (4.7.25-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9888 files and directories currently installed.) Preparing to replace bzip2 1.0.5-1 (using .../bzip2_1.0.5-3_amd64.deb) ... Unpacking replacement bzip2 ... Preparing to replace libbz2-1.0 1.0.5-1 (using .../libbz2-1.0_1.0.5-3_amd64.deb) ... Unpacking replacement libbz2-1.0 ... Setting up libbz2-1.0 (1.0.5-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9888 files and directories currently installed.) Preparing to replace libgdbm3 1.8.3-3 (using .../libgdbm3_1.8.3-8_amd64.deb) ... Unpacking replacement libgdbm3 ... Preparing to replace zlib1g 1:1.2.3.3.dfsg-12 (using .../zlib1g_1%3a1.2.3.3.dfsg-15_amd64.deb) ... Unpacking replacement zlib1g ... Setting up zlib1g (1:1.2.3.3.dfsg-15) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9891 files and directories currently installed.) Preparing to replace perl 5.10.0-19lenny2 (using .../perl_5.10.1-8_amd64.deb) ... Unpacking replacement perl ... Preparing to replace perl-base 5.10.0-19lenny2 (using .../perl-base_5.10.1-8_amd64.deb) ... Unpacking replacement perl-base ... Setting up perl-base (5.10.1-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9951 files and directories currently installed.) Preparing to replace liblocale-gettext-perl 1.05-4 (using .../liblocale-gettext-perl_1.05-6_amd64.deb) ... Unpacking replacement liblocale-gettext-perl ... Setting up liblocale-gettext-perl (1.05-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9951 files and directories currently installed.) Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ... Unpacking replacement libtext-iconv-perl ... Setting up libtext-iconv-perl (1.7-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9952 files and directories currently installed.) Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ... Unpacking replacement libtext-charwidth-perl ... Setting up libtext-charwidth-perl (0.04-6) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9952 files and directories currently installed.) Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ... Unpacking replacement libtext-wrapi18n-perl ... Setting up libtext-wrapi18n-perl (0.06-7) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9952 files and directories currently installed.) Preparing to replace debconf-i18n 1.5.24 (using .../debconf-i18n_1.5.28_all.deb) ... Unpacking replacement debconf-i18n ... Setting up debconf-i18n (1.5.28) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9956 files and directories currently installed.) Preparing to replace debconf 1.5.24 (using .../debconf_1.5.28_all.deb) ... Unpacking replacement debconf ... Setting up debconf (1.5.28) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9942 files and directories currently installed.) Preparing to replace libpam0g 1.0.1-5+lenny1 (using .../libpam0g_1.1.0-4_amd64.deb) ... Unpacking replacement libpam0g ... Setting up libpam0g (1.1.0-4) ... Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9942 files and directories currently installed.) Preparing to replace libpam-modules 1.0.1-5+lenny1 (using .../libpam-modules_1.1.0-4_amd64.deb) ... Unpacking replacement libpam-modules ... Setting up libpam-modules (1.1.0-4) ... Installing new version of config file /etc/security/limits.conf ... Installing new version of config file /etc/security/namespace.init ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9947 files and directories currently installed.) Preparing to replace passwd 1:4.1.1-6 (using .../passwd_1%3a4.1.4.2-1_amd64.deb) ... Unpacking replacement passwd ... Setting up passwd (1:4.1.4.2-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9941 files and directories currently installed.) Preparing to replace libuuid1 1.41.3-1 (using .../libuuid1_2.16.1-4_amd64.deb) ... Unpacking replacement libuuid1 ... Setting up libuuid1 (2.16.1-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9941 files and directories currently installed.) Preparing to replace libblkid1 1.41.3-1 (using .../libblkid1_2.16.1-4_amd64.deb) ... Unpacking replacement libblkid1 ... Setting up libblkid1 (2.16.1-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9942 files and directories currently installed.) Preparing to replace mount 2.13.1.1-1 (using .../mount_2.16.1-4_amd64.deb) ... Unpacking replacement mount ... Setting up mount (2.16.1-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9942 files and directories currently installed.) Preparing to replace ncurses-bin 5.7+20081213-1 (using .../ncurses-bin_5.7+20090803-2_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.7+20090803-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9942 files and directories currently installed.) Preparing to replace sed 4.1.5-6 (using .../archives/sed_4.2.1-4_amd64.deb) ... Unpacking replacement sed ... Setting up sed (4.2.1-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9945 files and directories currently installed.) Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.87dsf-8_amd64.deb) ... Unpacking replacement sysvinit-utils ... Replacing files in old package sysvinit ... Setting up sysvinit-utils (2.87dsf-8) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9949 files and directories currently installed.) Preparing to replace libsepol1 2.0.30-2 (using .../libsepol1_2.0.40-2_amd64.deb) ... Unpacking replacement libsepol1 ... Setting up libsepol1 (2.0.40-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9949 files and directories currently installed.) Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.87dsf-8_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.87dsf-8) ... sysvinit: creating /dev/initctl init: timeout opening/writing control channel /dev/initctl (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9950 files and directories currently installed.) Preparing to replace tar 1.20-1 (using .../archives/tar_1.22-2_amd64.deb) ... Unpacking replacement tar ... Setting up tar (1.22-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9950 files and directories currently installed.) Preparing to replace lsb-base 3.2-20 (using .../lsb-base_3.2-23_all.deb) ... Unpacking replacement lsb-base ... Setting up lsb-base (3.2-23) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9950 files and directories currently installed.) Preparing to replace tzdata 2009l-0lenny1 (using .../tzdata_2009s-1_all.deb) ... Unpacking replacement tzdata ... Setting up tzdata (2009s-1) ... Current default time zone: 'Etc/UTC' Local time is now: XXXX Universal Time is now: XXXX Run 'dpkg-reconfigure tzdata' if you wish to change it. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9956 files and directories currently installed.) Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.87dsf-8_amd64.deb) ... Unpacking replacement initscripts ... Setting up initscripts (2.87dsf-8) ... Installing new version of config file /etc/init.d/bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd ... Installing new version of config file /etc/init.d/stop-bootlogd-single ... Installing new version of config file /etc/init.d/bootmisc.sh ... Installing new version of config file /etc/init.d/checkfs.sh ... Installing new version of config file /etc/init.d/checkroot.sh ... Installing new version of config file /etc/init.d/hostname.sh ... Installing new version of config file /etc/init.d/killprocs ... Installing new version of config file /etc/init.d/mountnfs-bootclean.sh ... Installing new version of config file /etc/init.d/mountoverflowtmp ... Installing new version of config file /etc/init.d/mountdevsubfs.sh ... Installing new version of config file /etc/init.d/mountkernfs.sh ... Installing new version of config file /etc/init.d/mtab.sh ... Installing new version of config file /etc/init.d/rc.local ... Installing new version of config file /etc/init.d/rmnologin ... Installing new version of config file /etc/init.d/umountfs ... Installing new version of config file /etc/init.d/umountnfs.sh ... Installing new version of config file /etc/init.d/urandom ... Installing new version of config file /etc/network/if-up.d/mountnfs ... Selecting previously deselected package insserv. dpkg: considering deconfiguration of sysv-rc, which would be broken by installation of insserv ... dpkg: yes, will deconfigure sysv-rc (broken by insserv). (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9958 files and directories currently installed.) Unpacking insserv (from .../insserv_1.12.0-14_amd64.deb) ... De-configuring sysv-rc ... Setting up insserv (1.12.0-14) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9987 files and directories currently installed.) Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.87dsf-8_all.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.87dsf-8) ... info: Checking if it is safe to convert to dependency based boot. info: Reordering boot system, log to /var/lib/insserv/run-20091129T1026.log success: Enabled dependency based boot system. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 9987 files and directories currently installed.) Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.16.1-4_amd64.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package util-linux should be updated. Unpacking replacement util-linux ... Setting up util-linux (2.16.1-4) ... Installing new version of config file /etc/init.d/hwclockfirst.sh ... Installing new version of config file /etc/init.d/hwclock.sh ... Selecting previously deselected package dash. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10006 files and directories currently installed.) Unpacking dash (from .../dash_0.5.5.1-3_amd64.deb) ... Adding `diversion of /bin/sh to /bin/sh.distrib by dash' Adding `diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Setting up dash (0.5.5.1-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10017 files and directories currently installed.) Preparing to replace diff 2.8.1-12 (using .../diff_1%3a2.8.1-18_all.deb) ... Unpacking replacement diff ... Setting up diff (1:2.8.1-18) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10015 files and directories currently installed.) Preparing to replace mktemp 1.5-9 (using .../archives/mktemp_7.4-2_all.deb) ... Unpacking replacement mktemp ... Setting up mktemp (7.4-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10015 files and directories currently installed.) Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.16.1-4_amd64.deb) ... Unpacking replacement bsdutils ... Setting up bsdutils (1:2.16.1-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10015 files and directories currently installed.) Preparing to replace libncurses5 5.7+20081213-1 (using .../libncurses5_5.7+20090803-2_amd64.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.7+20090803-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10015 files and directories currently installed.) Preparing to replace ncurses-base 5.7+20081213-1 (using .../ncurses-base_5.7+20090803-2_all.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.7+20090803-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10015 files and directories currently installed.) Preparing to replace mawk 1.3.3-11.1 (using .../mawk_1.3.3-15_amd64.deb) ... Unpacking replacement mawk ... Preparing to replace libstdc++6 4.3.2-1.1 (using .../libstdc++6_4.4.2-3_amd64.deb) ... Unpacking replacement libstdc++6 ... Setting up libstdc++6 (4.4.2-3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10015 files and directories currently installed.) Preparing to replace libxapian15 1.0.7-4 (using .../libxapian15_1.0.16-3_amd64.deb) ... Unpacking replacement libxapian15 ... Preparing to replace libept0 0.5.22 (using .../libept0_0.5.29_amd64.deb) ... Unpacking replacement libept0 ... Preparing to replace libncursesw5 5.7+20081213-1 (using .../libncursesw5_5.7+20090803-2_amd64.deb) ... Unpacking replacement libncursesw5 ... Preparing to replace libcwidget3 0.5.12-4 (using .../libcwidget3_0.5.13-1_amd64.deb) ... Unpacking replacement libcwidget3 ... Preparing to replace aptitude 0.4.11.11-1~lenny1 (using .../aptitude_0.4.11.11-1+b2_amd64.deb) ... Unpacking replacement aptitude ... Preparing to replace apt 0.7.20.2+lenny1 (using .../apt_0.7.23.1_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.7.23.1) ... Installing new version of config file /etc/cron.daily/apt ... gpg: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) " not changed gpg: key ADB11277: "Etch Stable Release Key " not changed gpg: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed gpg: key F42584E6: "Lenny Stable Release Key " not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) " not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: Total number processed: 6 gpg: unchanged: 6 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10017 files and directories currently installed.) Preparing to replace readline-common 5.2-3.1 (using .../readline-common_6.0-5_all.deb) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package readline-common should be updated. Unpacking replacement readline-common ... Setting up readline-common (6.0-5) ... Selecting previously deselected package libreadline6. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10017 files and directories currently installed.) Unpacking libreadline6 (from .../libreadline6_6.0-5_amd64.deb) ... Setting up libreadline6 (6.0-5) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10030 files and directories currently installed.) Preparing to replace gpgv 1.4.9-3+lenny1 (using .../gpgv_1.4.10-2_amd64.deb) ... Unpacking replacement gpgv ... Setting up gpgv (1.4.10-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10031 files and directories currently installed.) Preparing to replace gnupg 1.4.9-3+lenny1 (using .../gnupg_1.4.10-2_amd64.deb) ... Unpacking replacement gnupg ... Setting up gnupg (1.4.10-2) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10039 files and directories currently installed.) Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.44-1_amd64.deb) ... Unpacking replacement libattr1 ... Setting up libattr1 (1:2.4.44-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10039 files and directories currently installed.) Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.48-1_amd64.deb) ... Unpacking replacement libacl1 ... Setting up libacl1 (2.2.48-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10039 files and directories currently installed.) Preparing to replace libcomerr2 1.41.3-1 (using .../libcomerr2_1.41.9-1_amd64.deb) ... Unpacking replacement libcomerr2 ... Setting up libcomerr2 (1.41.9-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10039 files and directories currently installed.) Preparing to replace libpam-runtime 1.0.1-5+lenny1 (using .../libpam-runtime_1.1.0-4_all.deb) ... Unpacking replacement libpam-runtime ... Setting up libpam-runtime (1.1.0-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10056 files and directories currently installed.) Preparing to replace libslang2 2.1.3-3 (using .../libslang2_2.2.1-1_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.1-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10056 files and directories currently installed.) Preparing to replace libss2 1.41.3-1 (using .../libss2_1.41.9-1_amd64.deb) ... Unpacking replacement libss2 ... Setting up libss2 (1.41.9-1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 10056 files and directories currently installed.) Preparing to replace cpio 2.9-13 (using .../archives/cpio_2.10-1_amd64.deb) ... Unpacking replacement cpio ... Preparing to replace libreadline5 5.2-3.1 (using .../libreadline5_5.2-7_amd64.deb) ... Unpacking replacement libreadline5 ... Preparing to replace libgomp1 4.3.2-1.1 (using .../libgomp1_4.4.2-3_amd64.deb) ... Unpacking replacement libgomp1 ... Preparing to replace libgmp3c2 2:4.2.2+dfsg-3 (using .../libgmp3c2_2%3a4.3.1+dfsg-3_amd64.deb) ... Unpacking replacement libgmp3c2 ... Preparing to replace libmpfr1ldbl 2.3.1.dfsg.1-2 (using .../libmpfr1ldbl_2.4.1-2_amd64.deb) ... Unpacking replacement libmpfr1ldbl ... Preparing to replace libstdc++6-4.3-dev 4.3.2-1.1 (using .../libstdc++6-4.3-dev_4.3.4-6_amd64.deb) ... Unpacking replacement libstdc++6-4.3-dev ... Preparing to replace g++-4.3 4.3.2-1.1 (using .../g++-4.3_4.3.4-6_amd64.deb) ... Unpacking replacement g++-4.3 ... Preparing to replace gcc-4.3 4.3.2-1.1 (using .../gcc-4.3_4.3.4-6_amd64.deb) ... Unpacking replacement gcc-4.3 ... Preparing to replace cpp-4.3 4.3.2-1.1 (using .../cpp-4.3_4.3.4-6_amd64.deb) ... Unpacking replacement cpp-4.3 ... Preparing to replace binutils 2.18.1~cvs20080103-7 (using .../binutils_2.20-4_amd64.deb) ... Unpacking replacement binutils ... Preparing to replace gcc-4.3-base 4.3.2-1.1 (using .../gcc-4.3-base_4.3.4-6_amd64.deb) ... Unpacking replacement gcc-4.3-base ... Preparing to replace libdb4.6 4.6.21-11 (using .../libdb4.6_4.6.21-14_amd64.deb) ... Unpacking replacement libdb4.6 ... Preparing to replace cpp 4:4.3.2-2 (using .../cpp_4%3a4.3.3-9+nmu1_amd64.deb) ... Unpacking replacement cpp ... Selecting previously deselected package liblzma0. Unpacking liblzma0 (from .../liblzma0_4.999.9beta+20091004-1_amd64.deb) ... Selecting previously deselected package xz-utils. Unpacking xz-utils (from .../xz-utils_4.999.9beta+20091004-1_amd64.deb) ... Preparing to replace make 3.81-5 (using .../archives/make_3.81-7_amd64.deb) ... Unpacking replacement make ... Preparing to replace libtimedate-perl 1.1600-9 (using .../libtimedate-perl_1.1900-1_all.deb) ... Unpacking replacement libtimedate-perl ... Preparing to replace dpkg-dev 1.14.25 (using .../dpkg-dev_1.15.5.2_all.deb) ... Unpacking replacement dpkg-dev ... Preparing to replace fakeroot 1.11 (using .../fakeroot_1.14.4-1_amd64.deb) ... Unpacking replacement fakeroot ... Preparing to replace gcc 4:4.3.2-2 (using .../gcc_4%3a4.3.3-9+nmu1_amd64.deb) ... Removing old gcc doc directory. Unpacking replacement gcc ... Preparing to replace g++ 4:4.3.2-2 (using .../g++_4%3a4.3.3-9+nmu1_amd64.deb) ... Unpacking replacement g++ ... Setting up libc-dev-bin (2.10.1-7) ... Setting up linux-libc-dev (2.6.30-8) ... Setting up libc6-dev (2.10.1-7) ... Setting up libgdbm3 (1.8.3-8) ... Setting up bzip2 (1.0.5-3) ... Setting up mawk (1.3.3-15) ... Setting up libxapian15 (1.0.16-3) ... Setting up libept0 (0.5.29) ... Setting up libncursesw5 (5.7+20090803-2) ... Setting up libcwidget3 (0.5.13-1) ... Setting up aptitude (0.4.11.11-1+b2) ... Setting up cpio (2.10-1) ... install-info: warning: maintainer scripts should not call install-info anymore, install-info: warning: this is handled now by a dpkg trigger provided by the install-info: warning: install-info package; package cpio should be updated. Setting up libreadline5 (5.2-7) ... Setting up libgomp1 (4.4.2-3) ... Setting up libgmp3c2 (2:4.3.1+dfsg-3) ... Setting up libmpfr1ldbl (2.4.1-2) ... Setting up gcc-4.3-base (4.3.4-6) ... Setting up cpp-4.3 (4.3.4-6) ... Setting up binutils (2.20-4) ... Setting up gcc-4.3 (4.3.4-6) ... Setting up libdb4.6 (4.6.21-14) ... Setting up cpp (4:4.3.3-9+nmu1) ... Setting up liblzma0 (4.999.9beta+20091004-1) ... Setting up xz-utils (4.999.9beta+20091004-1) ... Setting up make (3.81-7) ... Setting up fakeroot (1.14.4-1) ... Setting up gcc (4:4.3.3-9+nmu1) ... Setting up perl-modules (5.10.1-8) ... Setting up g++-4.3 (4.3.4-6) ... Setting up libstdc++6-4.3-dev (4.3.4-6) ... Setting up g++ (4:4.3.3-9+nmu1) ... Setting up perl (5.10.1-8) ... Setting up libtimedate-perl (1.1900-1) ... Setting up dpkg-dev (1.15.5.2) ... Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... build-essential is already the newest version. dpkg-dev is already the newest version. apt is already the newest version. apt set to manually installed. aptitude is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: user script /var/cache/pbuilder/build//NUM/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh starting umount: /sys: not mounted umount: /run: not found umount: /proc/bus/usb: not mounted umount: /dev/shm: not mounted umount: /lib/init/rw: not mounted cat: /var/run/inetd.pid: No such file or directory kill: 20: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or kill -l [exitstatus] I: user script /var/cache/pbuilder/build//NUM/tmp/hooks/E50-initscripts-2.86.ds1-7.workaround.sh finished I: unmounting dev/pts filesystem I: unmounting proc filesystem I: creating base tarball [/TESTDIR/testimage] I: cleaning the build env I: removing directory /var/cache/pbuilder/build//NUM and its subdirectories