2007-05-17 Junichi Uekawa * pbuilder-checkparams: * pbuilder-buildpackage: use tee so that user can see what's being logged. 2007-05-14 Junichi Uekawa * Documentation/pbuilder-doc.ja.po: * Documentation/Makefile: start implementing Japanese version of manual 2007-05-10 Junichi Uekawa * Documentation/debconf7/pbuilder.tex: add references to other works. * Documentation/pbuilder-doc.xml: add more explanation about B92test-pkg 2007-05-05 Junichi Uekawa * Documentation/pbuilder-doc.xml: update and clarify documentation. 2007-04-29 Loic Minier * pbuilder-satisfydepends-aptitude: Pass --without-recommends to aptitude. 2007-04-22 Junichi Uekawa * examples/execute_installtest.sh: update install test so that it can handle more than one packages. 2007-04-22 Loic Minier * pbuilder-satisfydepends-aptitude: Pass Aptitude::ProblemResolver::StepScore and Aptitude::CmdLine::Ignore-Trust-Violations flags to aptitude to help resolve complex situations relatively common in experimental and support unsigned repositories like we do for apt-get. 2007-04-17 Junichi Uekawa * debian/rules: remove amd64 from build rules. * testsuite/run-test.sh (HOOKOPTION): change upgrade testing procedure 2007-04-16 Junichi Uekawa * examples/B92test-pkg: change comment to clarify. * pdebuild.1: documentation update: note --debbuildopts and --debootstrapopts have different ways of specifying multiple options. This probably needs really fixing, but that will happen sometime later. * pbuilder.8: ditto. 2007-04-11 Junichi Uekawa * AUTHORS, etc: remove $Id$, which is CVS specific 2007-04-10 Junichi Uekawa * Documentation/pbuilder-doc.xml: update documentation * pbuilder-modules: say lenny instead of sarge * pbuilder.8: lenny is supported architecture, not sarge * pbuilderrc: make lenny default * testsuite/run-test.sh: add lenny 2007-04-03 Junichi Uekawa * Makefile: install pbuilder-satisfydepends-funcs, pbuilder-satisfydepends-checkparams 2007-04-02 Loic Minier * pbuilder-satisfydepends-aptitude: check whether the dummy dependencies package was truly installed or error out; catches situation where "aptitude" did not keep the dummy package but claimed the installation was successful. 2007-04-01 Junichi Uekawa * pbuilder-user-mode-linux.1, etc.: 409135: SEE ALSO fix. 2007-04-01 Loic Minier * pbuilder-satisfydepends*: - Modularize with new -funcs and -checkparams shared sources. - New pbuilder-satisfydepends-aptitude resolver based on aptitude. - Cleanups. 2007-03-31 Junichi Uekawa * pbuilder-user-mode-linux: spacing fix. * pbuilder-modules: re-refix. 391915 "The fix for #391915 as applied in 0.165 isn't quite correct, it still has an unconditional rm -f "$BUILDPLACE/etc/$a" outside the check for an existing /etc/$a to copy into its place." From Paul TBBle Hampson 2007-03-30 Junichi Uekawa * pbuilder-user-mode-linux : '-n "${PBUILDER_COW}"' is not a good condition since it will change default behavior for pbuilder create/update. Just use UML_IP=dhcp for condition. 2007-03-29 Junichi Uekawa * pbuilder-uml.conf.5: * pbuilder-user-mode-linux.1: add documentation for 'dhcp' option. * pbuilder-user-mode-linux: allow network dhcp configuration 415544 From: Paul TBBle Hampson 2007-03-28 Junichi Uekawa * pbuilder-user-mode-linux: make more vivid notes on what is executed inside the user-mode-linux * pbuilder-modules: for pbuilder-user-mode-linux; only warn if host network configuration files are not available, and assume it is correct inside the chroot, and give out a W: warning. From: Paul TBBle Hampson * debuild-pbuilder.1, pbuilder-uml.conf.5, pbuilder-user-mode-linux.1, pbuilder.8, pbuilderrc.5, pdebuild-user-mode-linux.1, pdebuild.1: 409135: Fix 'SEE ALSO' spacing. 2007-03-27 Junichi Uekawa * pbuilder, et al: Copyrigjht 2007 update. warning/ error message sent to >&2 consistently. * pdebuild: 399484: Use $BUILDRESULT with pdebuild-internal "Anderson Lizardo" 2007-03-21 Junichi Uekawa * debian/rules (binary-arch): create similar for amd64. * debian/control (Architecture): try having amd64 package for pbuilder-uml 2007-03-20 Junichi Uekawa * pbuilder-buildpackage: build-dep resolution cannot determine the architecture being built on when building under fakeroot, reported and patch submitted by Paul TBBle Hampson. 2007-01-31 Junichi Uekawa * pbuilder-satisfydepends: run dpkg-architecture inside chroot. 2007-01-30 Junichi Uekawa * pbuilder-user-mode-linux: Mattia Dongili: "As rootstrap allows this configuration it would be nice if pbuilder-uml was aware of it too and mount /lib/modules early enough to avoid errors and warnings." 2007-01-22 Junichi Uekawa * pbuilderrc: default is now --variant=buildd for debootstrap option 2007-01-20 Junichi Uekawa * pbuilder.8: add EXAMPLES section * pdebuild.1: add EXAMPLES section * debuild-pbuilder.1: add EXAMPLES section. 2007-01-13 Junichi Uekawa * git-tag.sh: * debuild.sh: tools for git repository package building. * Documentation/pbuilder-doc.xml: Add references to git repository. 2007-01-04 Junichi Uekawa * pbuilder-modules: Fix the situation where "cowbuilder --update --override-config --mirror $mirror" fails to clean up. 2006-12-17 Junichi Uekawa * pbuilder-createbuildenv: use FORCE_CONFNEW in 'pbuilder create' also, since dist-upgrade here may cause configuration file change if enough change exists. e.g. when OTHERMIRROR is set to backports.org * pbuilder: remove '/run' after 'execute' 2006-12-09 Loic Minier * pbuilder-satisfydepends-experimental: small optimization: move COMPARESTRING and DEPSVERSION computation out of the per-version loop; quote COMPARESTRING properly. * pbuilder-satisfydepends-experimental: small optimization: return the exact requested version when a strictly versionned dependency is used. 2006-11-14 Loic Minier * testsuite/regression/run-test-satisfy-depends.sh: log error messages with E:, not I:. 2006-11-13 Loic Minier * Documentation/pbuilder-doc.xml: describe workaround of using backports.org to use cowdancer for sarge; fixes #394710. 2006-11-06 Loic Minier * debuild-pbuilder, pbuilder-buildpackage-funcs, pdebuild-internal: use $PBUILDERSATISFYDEPENDSCMD instead of /usr/lib/pbuilder/pbuilder-satisfydepends. * pbuilderrc: set PBUILDERSATISFYDEPENDSCMD to /usr/lib/pbuilder/pbuilder-satisfydepends by default. * pbuilderrc.5: document PBUILDERSATISFYDEPENDSCMD. * debian/TODO: alternatives implementation of pbuilder-satisfydepends now possible. * pdebuild-checkparams, pdebuild-uml-checkparams, pdebuild-internal: add a new --pbuildersatisfydepends flag to override PBUILDERSATISFYDEPENDSCMD * pdebuild: pass --pbuildersatisfydepends to pdebuild-internal. * pbuilder-modules, pdebuild.1: document --pbuildersatisfydepends. * pbuilder-satisfydepends: drop an useless invocation of awk. * pbuilder-satisfydepends-experimental, Makefile: alternate implementation of pbuilder-satisfydepends which supports pulling build-deps with a version on the apt-get command-line; this is derived from pbuilder-satisfydepends with the following changes: - Add and use new package_versions() and candidate_version() helpers; the former returns all versions of a package available via APT, the later APT's candidate version. - For versionned build-deps, when building the "apt-get install" command, try APT's candidate version or all available versions available from APT in ascending order (the reverse order of apt-cache's output); checkbuilddep_versiondeps() isn't used for this part of the process anymore, but it is still used to honor build-conflicts. - Recover from APT errors caused by unsufficient dependencies ("libfoo-dev Depends: bar but baz is to be installed") and missing dependencies libfoo-dev Depends: bar but it is not going to be installed", or simply "libfoo-dev Depends: bar"); this permits simply listing build-deps when uploading to experimental; achieved by moving the version matching logic in the new versioneddep_to_aptcmd() helper. * pbuilderrc, pbuilderrc.5: document the availability of the alternate implementation. 2006-11-03 Loic Minier * pdebuild-internal: install the passwd package before calling groupadd and useradd. 2006-10-30 Loic Minier * pbuilder-modules: add sanity checks during umount_one(); ignore umount errors of the type "umount: /foobar: not mounted" and "umount: /foobar: not found" as retries will be useless anyway, and these errors shouldn't cause data loss; fixes #391390. * pbuilder-modules: umount selinux and bind mounts first. * testsuite/satisfydepends/gtk2-engines_*.changelog, testsuite/satisfydepends/gtk2-engines_*.control, testsuite/run-test-satisfy-depends.log, testsuite/run-test-satisfy-depends.sh: move to testsuite/regression and adapt to the regression suite layout. 2006-10-29 Junichi Uekawa * Documentation/pbuilder-doc.xml: developer info is updated. 2006-10-28 Loic Minier * testsuite/run-test-satisfy-depends.sh, testsuite/satisfydepends/debian/rules: new testsuite scripts to test pbuilder-satisfydepends. * testsuite/satisfydepends/gtk2-engines_*.changelog, testsuite/satisfydepends/gtk2-engines_*.control: initial test data. * testsuite/run-test-satisfy-depends.log: initial test results. * testsuite/run-test-satisfy-depends.sh: fix invocation from CVS checkout by only copying debian/rules and not debian/*. 2006-10-27 Junichi Uekawa * Documentation/pbuilder-doc.xml: update developers documentation. 2006-10-24 Junichi Uekawa * examples/E50-initscripts-2.86.ds1-7.workaround.sh: workaround postinst which mounts /lib/init/rw * Documentation/pbuilder-doc.xml: remove the note saying that pbuilder-user-mode-linux is not available. 2006-10-23 Junichi Uekawa * Documentation/pbuilder-doc.xml: s/cowdancer/cowbuilder/ 2006-09-16 Junichi Uekawa * added patch from Mattia Dongili for pbuilder-uml. diffstat /tmp/pbuilder-uml.diff debian/rules | 16 ++++++++++++++-- pbuilder-checkparams | 2 +- pbuilder-uml-checkparams | 2 +- pbuilder-user-mode-linux | 20 +++++++++++++++----- pdebuild-uml-checkparams | 2 +- pdebuild-user-mode-linux | 2 +- 6 files changed, 33 insertions(+), 11 deletions(-) 2006-09-03 Junichi Uekawa * examples/B90linda, etc.: add notice that it's usable for hookdir. 2006-09-02 Junichi Uekawa * pbuilder-checkparams (BASEBUILDPLACE): support --login, --execute, --pdebuild 2006-08-25 Junichi Uekawa * pbuilder-modules: support for selinux. 2006-08-20 Junichi Uekawa * pbuilder-checkparams: sort and reverse-sort bindmounts * pbuilder-modules: 2006-08-15 Junichi Uekawa * debian/control (Recommends): recommend cowdancer, for those people who complain about speed. * debian/TODO: update the TODO file for a change. * pbuilder-checkparams: PKGNAME_LOGFILE option support * pbuilderrc: PKGNAME_LOGFILE option support * pbuilderrc.5: PKGNAME_LOGFILE option support 2006-07-23 Junichi Uekawa * Documentation/pbuilder-doc.xml: update documentation on fakechroot. 2006-06-26 Junichi Uekawa * pdebuild-internal: export DEBBUILDOPTS 2006-06-17 Junichi Uekawa * testsuite/run-test.sh: remove sarge from test target, since I know it fails every time. 2006-06-15 Junichi Uekawa * debian/pbuilder-test/01_pbuilder_create: test against sid rather than sarge for now, since amd64 sarge doesn't work. 2006-06-11 Junichi Uekawa * pdebuild-checkparams: do not error out if buildresult directory does not exist. * pbuilder-buildpackage: actually do error-checking. * pbuilder-checkparams: do not error out if buildresult directory does not exist. * pbuilder-buildpackage: actually create buildresult dir, the condition was wrong. 2006-06-05 Junichi Uekawa * pdebuild-internal: -p for 'su' 2006-06-04 Junichi Uekawa * debian/TODO: spellfix * pbuilder-user-mode-linux.1: spellfix * Documentation/pbuilder-doc.xml: add note on tmpfs building. 2006-06-01 Junichi Uekawa * pbuilder-modules (pbuilder-options): silence ln -s for /etc/mtab 2006-05-31 Junichi Uekawa * pbuilder: update address of GPL, and generally update copyright dates. * debian/copyright (Copyright): update copyright info. 2006-05-29 Matt Kraai * pdebuild.1: Fix a misspelling of pdebuild. 2006-05-28 Junichi Uekawa * pbuilder-user-mode-linux.1: uppercase url->URL * pbuilder.8: ditto * pdebuild.1: From comment from Sesse, note that the default place build results are placed is /var/cache/pbuilder/result. 2006-05-27 Junichi Uekawa * Documentation/pbuilder-doc.xml: document cowdancer and pdebuild cowdancer option. 2006-05-24 Junichi Uekawa * pbuilder-buildpackage-funcs: quiet down cowprotect, it's giving out useless output, like the following: Copying back the cached apt archive contents /var/cache/pbuilder/build/cow.12278/etc/passwd /var/cache/pbuilder/build/cow.12278/etc/group Copying source file * pbuilder.8: fix pbuilder execute command-line specification to reflect that script can receive command-line parameters. * pdebuild: add a in invocation to pbuilder execute "--", to avoid reorder in cowbuilder, and still work with pbuilder. * pdebuild.1: document --pbuilder option. * pbuilderrc.5: document the new option * pdebuild-checkparams: --pbuilder option. Use pbuilder as default. It is possible to use cowbuilder. * pbuilder: add --XXX options as compatibility options for cowbuilder. * pdebuild (ARCHITECTURE): use PDEBUILD_PBUILDER instead of calling pbuilder directly, and use cowdancer-compatible command-line options. * Documentation/pbuilder-doc.xml: generally spellcheck, and revise. * pdebuild.1: spellcheck * pdebuild-user-mode-linux.1: spellcheck * pbuilderrc.5: spellcheck * pbuilder-modules: remove mention of potato/woody, since they probably don't work (pbuilder-options): remove potato/woody. * pbuilder.8: remove woody from supported list of distributions, we know dpkg from then doesn't really work with modern kernel. (well, they do, but I don't want this documented/advertised) * pbuilder-user-mode-linux.1: spellcheck * pbuilder.8: spellcheck 2006-05-22 Junichi Uekawa * debian/TODO: update TODO, amd64-x86 cross build is documented and functional. * pbuilder-satisfydepends: keep the original behavior until dpkg change is verified. 2006-05-17 Junichi Uekawa * Documentation/pbuilder-doc.xml: minor updates to the documentation. 2006-05-15 Junichi Uekawa * Documentation/pbuilder-doc.xml: document method for adding local repository. * pbuilder-satisfydepends: add support for new dpkg-dev construct for linux-any etc. patch by Peter Eisentraut. * THANKS: update thanks text for a change. * pbuilderrc.5: undocument the restriction that --buildresult option needs to be specified for pdebuild, and BUILDRESULT cannot be used. I should probably warn that the directory should be absolute. * pdebuild.1: fix man a bit to make --buildresult option doc unambiguous. * pbuilder-modules: fix pdebuild command options. 2006-04-22 Junichi Uekawa * Documentation/pbuilder-doc.xml: update docs on user-mode-linux usage. add reference to PDF version. * pdebuild: give --uid/--gid options to pdebuild-internal 2006-04-01 Junichi Uekawa * pdebuild: directory is moved after command-line is parsed. This should fix a few weird behaviors wrt relative directories, and allow --help to work if there is no debian/ directory 2006-03-31 Junichi Uekawa * pbuilder-satisfydepends: spelling mistake, thanks pryzbyj for telling me. daner->dancer 2006-03-22 Junichi Uekawa * pbuilderrc.5: spelling fix: s/extention/extension/ * pbuilderrc: * pbuilder.8: 2006-03-18 Junichi Uekawa * testsuite/regression/287477-pkgname-logfile.sh: create regression * pbuilder.8: update documentation of --pkgname-logfile * pbuilder-buildpackage: allow chown, and add support for PKGNAME_LOGFILE_EXTENTION. * pbuilderrc (PKGNAME_LOGFILE_EXTENTION): add * pbuilderrc.5: document 2006-03-17 Junichi Uekawa * pbuilder-buildpackage (BUILDRESULTGID): chown/chgrp buildresult logfiles 2006-03-08 Junichi Uekawa * Documentation/pbuilder-doc.xml: apply necessary formatting edition. * Documentation/Makefile (%.pdf): create PDF documentation out of pbuilder-doc. * Documentation/pbuilder-doc.xml: update amd64->i386 cross debootstrap command-line option. apparently, the --arch=i386 notation doesn't seem to work anymore. 2006-02-23 Junichi Uekawa * pbuilder-modules (pbuilder-options): remove NONUSMIRRORSITE * pbuilder.8: * pbuilder-user-mode-linux.1: remove --nonusmirror * pbuilder-uml-checkparams: remove --nonusmirror * pbuilder-checkparams: remove --nonusmirror * pbuilder-modules (pbuilder-options): remove reference to --nonusmirror [non-US mirror location] option. * pbuilderrc (MIRRORSITE): remove non-US * testsuite/regression/344089-initscripts-inetd-workaround-check.sh: remove, bugs are all resolved. 2006-02-12 Junichi Uekawa * pbuilder-updatebuildenv: * pbuilder-createbuildenv: * pbuilder: move apt-get clean after umountproc, so that you can probably bind-mount /var/cache/apt/archives 2006-02-11 Junichi Uekawa * pbuilder-satisfydepends: quote echo INSTALLPKGMULTI * pbuilder: apt-get clean after save_aptcache. * pbuilderrc.5: document that EXTRAPACKAGES is a space-delimited list. 2006-01-30 Junichi Uekawa * Makefile: install the script * examples/G50-initscripts-2.86.ds1-11-cdebootstrap0.3.9.sh: implement workaround. * pbuilder.8: document G hook. * pbuilder-createbuildenv: add G hook * testsuite/run-test.sh: use the workaround dir for testing. * Makefile: install workaround hooks to /usr/share/doc/pbuilder/examples/workaround 2006-01-24 Junichi Uekawa * examples/B92test-pkg: improve the script a bit; do not fail if apt-get install of a previous version fails, and cd to the package directory before test starts. 2006-01-13 Junichi Uekawa * debian/TODO: update notes on cowdancer. * Documentation/pbuilder-doc.xml (BINDMOUNTS): add note on regression testing. 2006-01-12 Junichi Uekawa * pbuilder-modules: replace ../project/experimental with experimental 2006-01-06 Junichi Uekawa * pbuilderrc.5: document that there are default values for BUILDRESULTUID * pbuilder-buildpackage (BUILDRESULTGID, BUILDRESULTUID): set default values here. * pbuilder-modules (pbuilder-options): --debootstrap= is not a valid option, change to --debootstrap[space] 2005-12-21 Junichi Uekawa * Makefile (install): * examples/B91debc: * examples/B90list-missing: from q-funk. 343894 * testsuite/run-regression.sh: add results display. * testsuite/run-test.sh: add results display * testsuite/run-test-uml.sh: add results display. * testsuite/run-regression.sh: run tests in numerical order of bug reports. * testsuite/regression/344089-workaround-check.sh: create a regression test * testsuite/run-test.sh: use /usr/share/doc/pbuilder/examples/344089 for hookdir. * Makefile: no longer install libc6 workaround which is outdated, and install the initscripts workaround to /usr/share/doc/pbuilder/examples/344089 * examples/E50-initscripts-2.86.ds1-7.workaround.sh: add a workaround for #344089, and #262627 2005-12-19 Junichi Uekawa * pdebuild-internal: export HOME with a decent value. * Documentation/pbuilder-doc.xml: document that $HOME is set to /tmp/buildd, since that seems to be the case in pbuilder-buildpackage 2005-12-12 Junichi Uekawa * testsuite/regression/342665-config: config used for the regression test. This is to address 342665 * testsuite/regression/342665-pbuilder-ccache.sh: regression testsuite. * Documentation/pbuilder-doc.xml: update FAQ to note that ccache dir needs to be writable from user within chroot. * testsuite/run-regression.sh: add 2005-12-09 Junichi Uekawa * debian/TODO: update TODO. 2005-12-05 Junichi Uekawa * pdebuild-user-mode-linux: * pdebuild-uml-checkparams: * pdebuild-checkparams: * pdebuild: readlink -e instead of readlink -f * pbuilder-uml-checkparams: readlink -e instead of readlink -f * pbuilder-modules: readlink -e instead of readlink -f * pbuilder-createbuildenv: quote HOOKDIR and readlink -e instead of readlink -f. * pbuilder-checkparams: * pbuilder-buildpackage: use readlink -e here. * pbuilder-buildpackage-funcs: use readlink -e instead of readlink -f. 338976, reopened as 342117 thanks to Markus Kolb * pbuilder-buildpackage-funcs: 'install' was missing from apt-get for EXTRAPACKAGES handling. Fix. * pbuilderrc: make fakeroot default. * Documentation/pbuilder-doc.xml: update a note on pdebuild-internal is ran as the outside user uid. * pdebuild-internal: Add a note what I'm doing. 2005-12-04 Junichi Uekawa * debian/TODO: note TODO item. * pdebuild-internal: Revert to use of --force-yes, since --allow-unauthenticated does not work in sarge * pbuilder-updatebuildenv: * pbuilder-satisfydepends: * pbuilder-createbuildenv: * pbuilder-buildpackage-funcs: * examples/execute_installtest.sh: * examples/B92test-pkg: * examples/B91dpkg-i: * examples/B90linda: * pbuilder-createbuildenv: implement --no-targz for pbuilder create. * pbuilder-buildpackage-funcs: #338976; SUTOUSER check is bogus. Only add a user when there is a user to add. * pdebuild-internal: use --allow-unauthenticated option rather than --force-yes to apt-get install * pbuilder-updatebuildenv: * pbuilder-satisfydepends: * pbuilder-createbuildenv: * pbuilder-buildpackage-funcs: * examples/execute_installtest.sh: --allow-unauthenticated option to apt-get install * examples/B92test-pkg: * examples/B91dpkg-i: * examples/B90linda: 2005-12-01 Junichi Uekawa * Documentation/pbuilder-doc.xml: add notes on ccache+pbuilder. * pbuilder-buildpackage: preserve environment when running as root. Thanks to Mike Hommey 2005-11-28 Junichi Uekawa * testsuite/run-test.sh: run pdebuild-internal on one directory and use another directory for build place. I don't know why but it's started to fail running since 28 Nov..? pdebuild internal sid fails to umount the bind-mount. -- this was fixed in 29 Nov run. Strange. 2005-11-16 Junichi Uekawa * pbuilder-buildpackage-funcs: test if /etc/shadow already exists before trying to change it. fix typo. 2005-11-11 Junichi Uekawa * pbuilder-modules (pbuilder-options): policy-rc.d: allow x11-common to run. 337541 2005-11-03 Junichi Uekawa * testsuite/run-test-experimental.sh: * testsuite/run-test-experimental.log: experimental test no longer works since apt with gpg checking is default, remove it. * debian/TODO: remove todo item on /etc/mtab documentation. * Documentation/pbuilder-doc.xml: document /etc/mtab is a symlink to /proc/mounts spellcheck. * debian/control (Depends): cdebootstrap or debootstrap * pbuilder-createbuildenv: change inconsistent error message Check and report error state when debootstrap specified in DEBOOTSTRAP option does not exist. 2005-11-02 Junichi Uekawa * debian/TODO: update. * pbuilder-modules: ln -s is protected with ||true, since /etc/mtab may already exist. * debian/TODO: update TODO. 2005-10-28 Junichi Uekawa * debian/TODO: update. * Documentation/pbuilder-doc.xml: Update documentation on pbuilder on amd64 document TODO file. 2005-10-26 Junichi Uekawa * debian/TODO: update * testsuite/run-test.sh (testbuild): --resolve-deps removed. debootstrap 0.3.2 runs --resolve-deps per default. 2005-10-20 Junichi Uekawa * pdebuild: apply patch from Jonas Smedegaard (#312121) and change -P to -[bB] 2005-10-19 Junichi Uekawa * testsuite/run-test.sh (testbuild): Change to use resolve-deps in testsuite for debootstrap. 2005-10-18 Junichi Uekawa * debian/TODO: updated TODO file; with hopefully a better tracking of debian bugs. 2005-10-14 Junichi Uekawa * Documentation/pbuilder-doc.xml: update documentation to include IRC channel specification 2005-10-09 Junichi Uekawa * Documentation/pbuilder-doc.xml: update documentation on development policy. 2005-10-08 Junichi Uekawa * Documentation/pbuilder-doc.xml: reviewed and updated documentation. Added development, and bugreporting section, which should be filled up later, if possible. * debian/README.Debian: update README * pbuilder.8: refer to --debug option from --preserve-buildplace. 2005-10-06 Junichi Uekawa * testsuite/run-test.sh (testbuild): add debootstrapopts, --verbose. 2005-10-04 Junichi Uekawa * pbuilder-buildpackage-funcs: Add comment on what cowprotect is there for. 2005-09-30 Junichi Uekawa * Documentation/pbuilder-doc.xml: #325318, from Osamu Aoki; clarify about precedence in configuration options. * pbuilder-modules: * pbuilder-updatebuildenv: apply patch to place -maxdepth before other args. 2005-09-04 Junichi Uekawa * Documentation/pbuilder-doc.xml: Add notes on cowdancer. updates notes to note that it's hosted at alioth now. * Documentation/Makefile (preview): create target for preview with mozilla firefox. 2005-08-29 Junichi Uekawa * pdebuild.1: update semantics; left-to-right * pbuilder.8: update semantics; left-to-right 2005-08-28 Junichi Uekawa * pbuilderrc: SHELL variable is set a default value. 2005-08-19 Junichi Uekawa * pbuilder-buildpackage-funcs: do cow thing, with cowprotect, for cowdancer. 2005-08-17 Junichi Uekawa * debian/TODO: update the TODO list. * pbuilder-buildpackage-funcs: pass ${CHROOTEXEC} value directly to pbuilder-satisfydepends. * pbuilder-satisfydepends (CONTINUE_FAIL): add --internal-chrootexec 2005-08-15 Junichi Uekawa * pbuilder: $CHROOTEXEC instead of direct invocation of 'chroot' command. satisfydepends needs the CHROOTEXEC support. I want to support setting CHROOTEXEC so that I can hook 'chroot XXX cow-shell' instead of 'chroot XXX' 2005-08-07 Junichi Uekawa * debian/control: allow cdebootstrap dependency. * testsuite/run-test.sh: complicate the process by testing both cdebootstrap and debootstrap. * pbuilder.8: document --debootstrap * pbuilder-checkparams: --debootstrap * pbuilder-modules: --debootstrap * pbuilder-createbuildenv: unset DEBOOTSTRAPSCRIPT instead of setting "". The number of parameter given to cdebootstrap changes. since DEBOOTSTRAPSCRIPT are not supported by cdebootstrap, Giving cdebootstrap this parameter caused it to fail. * pbuilderrc.5: Document DEBOOTSTRAP * pbuilderrc (DEBOOTSTRAP): new option. * pbuilder-createbuildenv (DEBOOTSTRAPSCRIPT): call ${DEBOOTSTRAP} instead of calling debootstrap directly. 2005-07-28 Junichi Uekawa * Documentation/Makefile (%.html): update make rule to successfully fail on error. 2005-07-14 Junichi Uekawa * pbuilder-buildpackage: change the use of su, to allow su design change. Bug: 317264 2005-07-13 Junichi Uekawa * Documentation/pbuilder-doc.xml: added a reference to bug 316135 2005-07-11 Junichi Uekawa * pbuilderrc.5: clarify documentation to lighten the requirement of BUILDUSERID 2005-07-10 Junichi Uekawa * pbuilder-user-mode-linux.1: * pdebuild-user-mode-linux.1: * pdebuild.1: * pbuilder.8: use \- for dash. 2005-07-03 Junichi Uekawa * testsuite/run-test.sh (RESULTFILE): remove vmstat and iostat. I don't really need them; and add test for etch. * debian/TODO: add TODO 2005-07-02 Junichi Uekawa * testsuite/run-test.log: failure to run pdebuild-internal-sid-dsh is correct; until fixed pbuilder is in archive proper, it will fail. * debian/changelog: prepare for release. * debian/TODO: updated todo list. * pdebuild-internal: add missing --force-yes to pbuilder install. 2005-06-25 Junichi Uekawa * pbuilder-user-mode-linux: use configured PATH instead of hard-coded PATH. * pbuilder-buildpackage: preserve PATH in su, pass -p option. This fixes the problem with env-var preservation. 2005-06-20 Junichi Uekawa * pbuilderrc: set PATH in the configuration file. * pbuilder-buildpackage: do not set PATH inside pbuilder-buildpackage 2005-06-12 Junichi Uekawa * pbuilder-uml-checkparams: add --othermirror option to uml. * pbuilder-user-mode-linux.1: add othermirror documentation. * pbuilderrc.5: synchronize --othermirror documentation. * pbuilder.8: * testsuite/test-pdebuild.sh: add a sample command-line that should work. * pbuilder-modules (pbuilder-options): find '-xdev' is an option, not an evaluation, and so moved it around since newer find now complains. Marc Dequènes (Duck) and "Artur R. Czechowski" #312913 2005-06-08 Junichi Uekawa * pbuildd/install-test.sh: imported from pbuilder-buildd tree. 2005-06-05 Junichi Uekawa * debuild-pbuilder.1: * pbuilder-uml.conf.5: * pbuilderrc.5: * pdebuild.1: * pdebuild-user-mode-linux.1: * pbuilder.8: add \% escape for URL. 2005-06-04 Junichi Uekawa * pdebuild-internal: implement with user-adding. * pbuilder.8: document --help option * pdebuild.1: document the --help option. * pdebuild-checkparams: add --help * debian/pbuilder-uml.files: move to uml. * Makefile: install * pdebuild-user-mode-linux: use pdebuild-uml-checkparams * pdebuild-uml-checkparams: add --debsign-k * pbuilder-uml-checkparams: pdebuild options remove. * pdebuild-uml-checkparams: --buildresult * pdebuild.1: add --logfile option to documentation. * pdebuild-checkparams: --logfile option implemented for pdebuild. * Makefile (install): install * pdebuild: use pdebuild-checkparams instead. * pbuilder-checkparams: split * pdebuild-checkparams: new file. * pbuilder-updatebuildenv: fix typo * pbuilder.8: document --autocleanaptcache * pbuilder-updatebuildenv: * pbuilder-checkparams (AUTOCLEANAPTCACHE): support auto-clean of aptcache (IGNORE_UMOUNT): add --autocleanaptcache * debian/pbuilder-test/01_pbuilder_create: use sarge. * examples/B92test-pkg: fix after testing so that it works. * debian/pbuilder-test/03_pbuilder_build: fix typo. 2005-06-03 Junichi Uekawa * testsuite/run-test-experimental.sh: created a testsuite. * pbuilder-updatebuildenv: update copyright year * pbuilder-checkparams (BASEBUILDPLACE): move distribution 'experimental' checking here, instead of 'create' target. * pbuilder-createbuildenv: update copyright year. * pbuilder-modules: add etch. * pbuilder.8: add 'etch' for list of supported architectures, and make it the default. * examples/pbuilder-distribution.sh: * pbuilder-buildpackage-funcs: * pbuilder-createbuildenv: * pbuilder-modules: * pbuilder-satisfydepends: * pbuilder-updatebuildenv: * pbuilder.8: patch Emanuele Rocca to support 'experimental' for distribution. 2005-05-07 Junichi Uekawa * Documentation/pbuilder-doc.xml: Document testsuite. * debian/pbuilder-test/03_pbuilder_build: add * debian/pbuilder-test/02_pbuilder_update: add * debian/pbuilder-test/01_pbuilder_create: update 2005-05-02 Junichi Uekawa * Documentation/pbuilder-doc.xml: trim trailing spaces on lines Added documentation on directory structure of pbuilder. 2005-05-01 Junichi Uekawa * debian/pbuilder-test/01_pbuilder_create: an example script to test pbuilder. * Makefile (install): install * examples/B92test-pkg: a generic interface script to test a package. 2005-04-22 Junichi Uekawa * pbuilder-buildpackage: call save_aptcache after running final B hook on build. 2005-04-16 Junichi Uekawa * pdebuild.1: * pdebuild-user-mode-linux.1: add note that key-id is required in --debsign-k. * pbuilder-modules: document signing-related options in pbuilder-options. * pdebuild-user-mode-linux: * pdebuild: implement keyid specification. * Documentation/pbuilder-doc.xml: add document on using auto-debsign and add a FAQ entry for source.changes file. * pbuilder-checkparams: use --debsign-k option to specify DEBSIGN_KEYID * pdebuild.1: add --debsign-k option * pdebuild-user-mode-linux.1: add --debsign-k option 2005-04-11 Junichi Uekawa * examples/B91dpkg-i: Fix example script so that it actually works. 2005-04-06 Junichi Uekawa * pbuilder.8: * pbuilderrc.5: update documentation to fix confusing entry on DEBEMAIL (#302855) 2005-03-04 Junichi Uekawa * pbuilder: apply patch frp, Danilo to save aptcache on pbuilder login. Apply similar change to pbuilder execute. 271600 * pbuilder.8: * pbuilder-checkparams: * pbuilder-modules: support --aptcache option thanks: Danilo Piazzalunga 295766 * Cleaned build dir for pbuilder-uml #297100 * pbuilder-modules (pbuilder-options): document save-after-login/exec flag in --help output. #296672 2005-02-13 Junichi Uekawa * pbuilder.8: update documentation to include 'sarge' * pbuilder: set umask 0022 in pbuilder. 276589 * pbuilderrc (BUILDRESULT): make default distribution sarge, instead of woody. * pbuilder-modules: update to include sarge in list of distributions; this list is too long, needs some improvement. 289170 * pdebuild: Change build results by default to be owned by the building user, not root:root This change only required for pdebuild only, UML already runs as user. 286397 * pbuilder.8: clarify documentation for 286602, Do not use --debbuildopts -B, but use --binary-arch * Documentation/pbuilder-doc.xml: 293882: Jens Seidel small typo fixes. * pbuilderrc (MIRRORSITE): 295032: change default mirror from www.jp.debian.org to ftp.jp.debian.org 2005-01-04 Junichi Uekawa * Documentation/pbuilder-doc.xsl: update XSL stylesheet to work with new LDP * Documentation/pbuilder-doc.xml: update date. * pbuilder-buildpackage: * pbuilder-buildpackage-funcs: * pbuilder-checkparams: * pbuilder-modules: * pbuilder-uml-checkparams: * pdebuild: * pdebuild-internal: * pdebuild-user-mode-linux: * pbuilder: update copyright year * update copyright 2004-12-29 Junichi Uekawa * Documentation/pbuilder-doc.xml: minor update, it's fourth year already passed? * pdebuild-user-mode-linux, pdebuild: typo fix, thanks Clint Adams , Bug#287041 2004-12-11 Junichi Uekawa * Documentation/pbuilder-doc.xml: some more minor fixes before it is released * pdebuild-user-mode-linux, pdebuild: use bash instead of sh 2004-12-02 Junichi Uekawa * Documentation/pbuilder-doc.xml: some parts I fixed, but I am leaving some FIXME entries for later. * pbuilderrc.5: change to 'sid'. distribution default is now sid. * pbuilder-createbuildenv: change default distribution to sid, not woody * Documentation/pbuilder-doc.xml: apply patch from on documentation era eriksson . Needs review. * pdebuild-user-mode-linux: also * pdebuild: pass DEBBUILDOPTS through echo to dpkg-buildpackage. 2004-11-19 Junichi Uekawa * pbuilder.8: update docs. 2004-11-17 Junichi Uekawa * Makefile: add pbuilder-distribution.sh * Documentation/pbuilder-doc.xml: document the example. * examples/pbuilder-distribution.sh: add example from Jamin. 2004-11-16 Junichi Uekawa * pdebuild-user-mode-linux: * pdebuild: Check for build-deps before dpkg-buildpackage -S 2004-11-14 Junichi Uekawa * pdebuild: add quoting for debbuildopts. 2004-11-05 Junichi Uekawa * pbuilderrc.5: Fix formatting errors #279700 from Jordi Mallach 2004-10-31 Junichi Uekawa * Documentation/pbuilder-doc.xml (PBUILDER_UML_IMAGE): add notes on BUILDRESULTUID and SUDO interaction. * pbuilder-buildpackage (PACKAGENAME): move around buildresult dir creation before pkgname logfile creation. * pbuilder.8: add documentation for --save-after-login/exec option. * pbuilder: execute and login with --save-after-login/exec option. * pbuilder-user-mode-linux.1: add notes that uml-nocow is effective for exec and login. * pbuilder-uml-checkparams (UML_SAVE_AFTER_LOGIN): add UML_NOCOW for exec * pbuilder-checkparams (SAVE_AFTER_LOGIN): --save-after-login/exec command-option. * pdebuild-user-mode-linux.1: add notes that the option will override pbuilder option. * pdebuild.1: add notes that the option will override pbuilder option * pdebuild-user-mode-linux: ditto. * pdebuild: override --debbbuildopts in pbuilder option when DEBBUILDOPTS is available and for non-internal mode. 2004-10-20 Junichi Uekawa * debian/control: Remove uml package * debian/rules: Remove uml package workaround for sarge release. 2004-10-09 Junichi Uekawa * Documentation/pbuilder-doc.xml (PBUILDER_UML_IMAGE): documentation on what directories cannot be bind-mounted #275113 Added documentation on how to hook to pbuilder update. somewhat addresses #275016, #272353 * debian/control (Depends): remove versioned depends on user-mode-linux. Packages are provided from other kernel packages. #275544 * pbuilder: implement pbuilder debuild #275110 * Documentation/pbuilder-doc.xml (PBUILDER_UML_IMAGE): update doc on debian_chroot env var. #275466 2004-09-13 Junichi Uekawa * pbuilder-modules (pbuilder-options): remove non-free and contrib from non-us. 2004-08-12 Junichi Uekawa * pbuildd/remote-buildd.sh: files from 'compiler' distributed pbuilder setup * pbuildd/build-agent.sh: files from 'compiler' * pbuildd/README: Added 2004-08-08 Junichi Uekawa * pbuildd/buildd.sh: Applied patch from Roland Stigge. 263987 264182 264182 buildd.sh assumes to be in ${BASEDIRECTORY} buildd.sh shouldn't try to build packages for wrong architectures support DEPWAIT 2004-07-29 Junichi Uekawa * debian/pbuilder-uml.files: add pbuilder-uml-checkparams * Makefile: add pbuilder-uml-checkparams * pdebuild-user-mode-linux.1: update manual to reflect current reality of pdebuild-user-mode-linux. It was originally just a copy of pdebuild manpage. * pbuilder-checkparams: shift around debootstrapopts parameter processing out of pdebuild options; it doesn't belong there. * pdebuild-user-mode-linux: Call pbuilder-uml-checkparams to parse commands in UML way, not pbuilder way. * pbuilder-uml-checkparams: Move command-line parser to here * pbuilder-user-mode-linux: Move command-line parser out 2004-07-24 Junichi Uekawa * pbuilder-user-mode-linux.1: document dumpconfig. * pbuilder.8: document dumpconfig * pbuilder-modules: add note to dumpconfig in help. * pbuilder: add dumpconfig option. * pbuilder-user-mode-linux: pass --debug option to pbuilder when --uml-debugmode is available. add "dumpconfig" operation. 2004-07-21 Junichi Uekawa * testsuite/run-test-uml.sh: try to update. Still does not work. * testsuite/rootstrap.conf: try to update * pbuilder-uml.conf.5: update doc to note that ~/.pbuilderrc shoulnd't have APTCACHEHARDLINK=yes if using user-mode-linux * pbuilder-uml.conf (APTCACHEHARDLINK): set default value of APTCACHEHARDLINK to no. 2004-07-16 Junichi Uekawa * pbuilder-user-mode-linux: 259325: call /sbin/halt -d -f instead of just doing an exit from UML. init=/bin/sh, and this is required for safe exit now, apparently. 2004-07-14 Junichi Uekawa * Documentation/pbuilder-doc.xml: update notes on D10tmp script. * examples/D10tmp: mkdir -p 2004-07-09 Junichi Uekawa * testsuite/run-test.sh (IOSTATPID): add debemail to testsuite. * pbuilder-buildpackage (PACKAGENAME): move SUTOUSER outside of what's fed into bash. Run bash in SUTOUSER. SUTOUSER might be eating quote characters. 2004-06-19 Junichi Uekawa * pbuilder-user-mode-linux: apply patch from Mike Markley Bug#252800: pbuilder-uml: hardcodes rootstrap image size argument (--buildresult): found typo in error message, It said $d instead of $2. * pbuilder-user-mode-linux.1: document. * pbuilder-user-mode-linux (uml-login-nocow): add --uml-login-nocow option for pbuilder login without COW filesystem use. * pdebuild.1: add warning on pdebuild/pbuilder options. specifying --basetgz as pdebuild option does not work. 255005 2004-06-17 Junichi Uekawa * pbuilder-updatebuildenv: Patch from matt kraai to save apt cache when pbuilder update fails. 252777, 252793 2004-05-27 Junichi Uekawa * debian/control (Depends): add coreutils 4.5.8-1 dependency. 2004-04-20 Junichi Uekawa * pbuilder-modules: patch from Michel Daenzer (244698) to work around /usr/sbin/update-binfmts. 2004-04-18 Junichi Uekawa * pbuilder-modules: "main contrib non-free" to "main" only. contrib, non-free aren't really required here. 2004-04-07 Junichi Uekawa * debian/control (Depends): Require 0.2.29 or later of debootstrap * pbuilder-modules (pbuilder-options): document option. * pbuilder-checkparams (IGNORE_UMOUNT): --debootstrapopts * pbuilderrc.5: document the option DEBOOTSTRAPVARIANT. * pbuilderrc (DEBOOTSTRAPOPTS): new option. * pbuilder-createbuildenv (DEBOOTSTRAPOPTS): add DEBOOTSTRAPOPTS which should be empty, or '--variant=buildd' 2004-04-04 Junichi Uekawa * pbuilder.8: update manpage to clarify terms on don't bind-mount. update date. * debian/TODO: update TODO file. 2004-03-13 Junichi Uekawa * testsuite/run-test.sh: run-test changed to create log. Add libc6workaround for now. -- after some testing, libc6workaround is not really required. Strange. It will probably be required for upgrades containing libc6. * Makefile: install * examples/E50-libc2.3.2.ds1-11-workaround: libc6 workaround. * Documentation/pbuilder-doc.xml: Try to update the docs. 2004-02-28 Junichi Uekawa * Makefile (install): install F90chrootmemo * pbuilder: implement hook F for login/execute * Documentation/pbuilder-doc.xml: update doc to use F hook. * examples/F90chrootmemo: create F example. * pbuilder.8: add "F" hook 2004-02-27 Junichi Uekawa * Documentation/pbuilder-doc.xml: document the chrootmemo script in FAQ section. * Makefile (install): install the memo. * examples/D90chrootmemo: implement Turbo's request. Add this to your hookdir. 2004-02-23 Junichi Uekawa * pbuilder.8: fix typo on manual page from Matt Kraai 2004-01-19 Junichi Uekawa * pdebuild-user-mode-linux.1: document * pdebuild.1: document * pdebuild-internal: add support for DEBBUILDOPTS * pdebuild-user-mode-linux: add support for DEBBUILDOPTS remove '|| true ' from dpkg-source invocation * pdebuild: --debbuildopts support. * examples/execute_installtest.sh (KILLPID): add killing routine; change it to reboot, to get a reboot done. 2004-01-12 Junichi Uekawa * testsuite/run-test.sh (IOSTATPID): create normal/ dir for plain pbuilder logs. * testsuite/run-test-uml.sh (PBUILDER_UML): create uml/ dir for uml logs. * testsuite/run-test.sh: update estimate time. 2004-01-11 Junichi Uekawa * pbuilder-checkparams: logging * debian/copyright (Copyright): update copyright info. * pbuilder: update copyright info * pbuilder-modules: update copyright info. * testsuite/run-test.sh: change to pbuilder test, instead of UML. * testsuite/run-test-uml.sh: split out UML test * README: tried updating the documentation. * Documentation/pbuilder-doc.css: Change css so that it's black on white, not white on black. 2004-01-10 Junichi Uekawa * examples/B91dpkg-i: fix typo to properly obtain the list of packages 2004-01-06 Junichi Uekawa * Documentation/pbuilder-doc.xml: Notes on debootstrap failures. * pbuilder.8: add a note so that people won't mistake pbuilder will use --extrapackage for creating the bootstrap script. 2003-12-31 Junichi Uekawa * Documentation/pbuilder-doc.xml: updated doc so that user-mode-linux is no longer in the experimental section of the documentation. A new faq entry on 'pbuilder is slow', to recomment using pbuilder-uml when the user thinks tar is slow. 2003-12-30 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): Document apt-proxy is usable as a proxy. 2003-12-29 Junichi Uekawa * Documentation/pbuilder-doc.xml: update docs on --use-pdebuild-internal 2003-12-27 Junichi Uekawa * testsuite/run-test.sh (PBUILDER_UML): fix rm testbuild2. Estimate is 45 minutes now. It takes longer. * Makefile (clean): clean testsuite/testbuild2 directory also. * pdebuild-internal: use dpkg-buildpackage inside the chroot rather than debuild. 2003-12-26 Junichi Uekawa * examples/execute_installtest.sh: add CVS id output 2003-12-24 Junichi Uekawa * testsuite/run-test.sh (PBUILDER_UML): add pdebuild-user-mode-linux tests. 2003-12-23 Junichi Uekawa * Makefile (install): update build rules to install pdebuild-internal * pbuilderrc.5: update document USE_PDEBUILD_INTERNAL * pdebuild-user-mode-linux.1: document --use-pdebuild-internal * pdebuild.1: document --use-pdebuild-internal * pbuilder-modules: document use-pdebuild-internal * pbuilder-checkparams: --use-pdebuild-internal option. * pdebuild: use pdebuild-internal if USE_PDEBUILD_INTERNAL option is 'yes' * pdebuild-user-mode-linux: use pdebuild-internal if USE_PDEBUILD_INTERNAL option is 'yes' * pdebuild-internal: Implement a pbuilder execute script to be used for pdebuild without doing debian/rules clean outside of chroot. * pbuilder-checkparams: support multiple bindmounts; delimit it with spaces. * pbuilder-modules: add --debug option here. 2003-12-20 Junichi Uekawa * examples/execute_installtest.sh: add /etc/mailname hack for emacs. note known bugs as comment. 2003-12-18 Junichi Uekawa * debian/changelog: update changelog for 0.96 release 2003-12-16 Junichi Uekawa * debian/control (Description): do not conflict with older bash. * pbuilder-buildpackage-funcs: * pbuilder-checkparams: do not error out on failure to unset. * pbuilder.8: document --debug. * pbuilder-checkparams (IGNORE_UMOUNT): --debug option. * pbuilder-createbuildenv: * pbuilder-updatebuildenv: use PBUILDER_DEBUGMODE variable * pbuilder-createbuildenv (DEBOOTSTRAPSCRIPT): use $TRAP instead of trap, and set TRAP to trap only when PRESERVE_BUILDPLACE is not yes. * Makefile (install): install new examples. * Documentation/pbuilder-doc.xml: Document execute_installtest.sh * examples/execute_installtest.sh: Install testing script. Calls apt. * testsuite/run-test.sh (PBUILDER_UML): add regression test on execute script. * pbuilder-user-mode-linux.1: update manual page on passing on of the command-line on 'execute'. * pbuilder.8: update manual page on passing on of the command-line on 'execute' * pbuilder-user-mode-linux (UML_EXECUTE_EXTRAOPT): added new option for appending parameters to the end of the pbuilder-command-line. * examples/execute_paramtest.sh: sample execute script; to give what is given as a parameter. * pbuilder-user-mode-linux: || true on unset. * pbuilder: Accept command-line options for 'execute' command 2003-12-15 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): document problem with /dev/null 2003-12-14 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): add notes on debconf inside pbuilder. 2003-12-11 Junichi Uekawa * debuild-pbuilder.1: fix document formatting error, from Roland Stigge. * pbuilder-runhooks (hooks): Try and detect file name non-matching case for hooks, from Dale Amon. 2003-11-28 * Documentation/pbuilder-doc.xml: update 2003-11-27 Junichi Uekawa * debian/control (Conflicts): add conflicts against old bash. unset fails. 2003-11-21 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): add notes on fakechroot. 2003-11-16 Junichi Uekawa * pbuilder-user-mode-linux: preen fsck. comment out fsck bit, it's too slow. * THANKS: add * pbuilder-runhooks: fix warning messages to be more correct, thanks to Daniel Martin. 2003-11-11 Junichi Uekawa * pbuilder-modules (pbuilder-options): reorder umount and mount so that dev, devpts, proc is done in that order. 2003-11-09 Junichi Uekawa * pbuilder-user-mode-linux: Do no hard-fail if I fail to fsck; fsck isn't really a requirement. 2003-11-08 Junichi Uekawa * pbuilder-user-mode-linux: add fsck 2003-11-06 Junichi Uekawa * pdebuild-user-mode-linux.1: update documentation. * pdebuild.1: typographical fix. * pdebuild-user-mode-linux (ARCHITECTURE): update to support --configfile option. 2003-10-29 Junichi Uekawa * debian/TODO: note the memo. * elmo.txt: note on apt. 2003-10-28 Junichi Uekawa * pdebuild.1: pbuilder will use the config file that is specified as pdebuild command-line. * pdebuild (ARCHITECTURE): Add --configfile to the call to pbuilder invocation. * pbuilder-checkparams (IGNORE_UMOUNT): EXTRA_CONFIGFILE is an array containing the list of CONFIGFILEs loaded via --configfile. * pbuilder-user-mode-linux: rename variable that looked similar to other variable. CONFIGFILE->SYSTEM_CONFIG. * pbuilder-checkparams (IGNORE_UMOUNT): add error check to --configfile option * pbuilderrc.5: update docs on BUILDRESULT not effective on pdebuild. * pdebuild.1: add notes on pdebuild requiring buildresult to be specified. 2003-10-23 Junichi Uekawa * pbuilder-modules (pbuilder-options): fix quoting. * pbuilderrc.5: update doc to mention mirrorsite. 2003-10-20 Junichi Uekawa * pbuilder.8: document. add more warnings against bind mounting. -xdev does cross bind-mount boundaries if they are the same device. 2003-10-18 Junichi Uekawa * Makefile (clean): fix clean rule to clean up * testsuite/run-test.sh (PBUILDER_UML): add more cases, test-build debootstrap also. * pbuilder-modules (pbuilder-options): change policy-rc.d to allow makedev to run. * pbuilder-user-mode-linux.1: update doc. * pbuilder-user-mode-linux (UML_DEBUGMODE): error check if BUILDPLACE is user-accessible. 2003-10-10 Junichi Uekawa * pbuilder-modules (pbuilder-options): change the wording slightly and document a workaround. 2003-10-05 Junichi Uekawa * THANKS: update thanks file. 2003-10-03 Junichi Uekawa * pbuilder-user-mode-linux (BUILDING_DSC_FILE): error checking on readlink. * pbuilder-checkparams (IGNORE_UMOUNT): error-checking on readlink. 2003-09-24 Junichi Uekawa * pbuilder-modules (pbuilder-options): actually, return 101 for policy-rc.d * debian/TODO: update * pbuilder-modules (pbuilder-options): install policy-rc.d inside chroot if it does not exist, and make it a dummy exit-all one. * THANKS: add Aaron here. * pbuilder-buildpackage (PACKAGENAME): use echo here, so that su won't mess up the command-line. c.f. 203584, "Aaron M. Ucko" 2003-09-23 Junichi Uekawa * debian/TODO: update * pbuilder.8: updated docs. * pbuilder-user-mode-linux.1: add docs on new options, mirror and nonusmirror. * testsuite/run-test.sh (PBUILDER_UML): add option --mirror. * pbuilder-user-mode-linux (UML_DEBUGMODE): support mirror option to set mirror, and nonusmirror. 2003-09-22 Junichi Uekawa * pdebuild (ARCHITECTURE): do not || true for dpkg-buildpackage -S. * testsuite/run-test.sh (PBUILDER_UML): update script to test both sid and sarge. 2003-09-19 Junichi Uekawa * testsuite/run-test.sh (PBUILDER_UML): download * Makefile (clean): remove testsuite/testimage, it's 1G. (full-check): add new target to run the test program. * pbuilder-user-mode-linux (UML_EXITCODE): check for rootstrap.conf in the current directory. * testsuite/run-test.sh (PBUILDER_UML): a test script to run pbuilder-uml and see if it's working. * testsuite/rootstrap.conf (interface): testsuite config 2003-09-05 Junichi Uekawa * pbuilder-uml.conf.5: document slirp here also. 2003-09-04 Junichi Uekawa * pbuilder-user-mode-linux.1: Document how to use slirp; it was actually easy. * pbuilder-modules: fix typo in file existence checking. * debian/TODO: how about passing "-o dpkg::Options=--force-confnew" to apt? is now done. Request from Roland Stigge to finally implement the missing feature. * pbuilder-checkparams: set FORCE_CONFNEW array variable if DEBIAN_FRONTEND is noninteractive to allow non-interactive install. * pbuilder-updatebuildenv: use FORCE_CONFNEW variable to give force-confnew option to DPKG 2003-09-02 Junichi Uekawa * pbuilder-modules: check if etc/hosts etc. exists before trying to readlink. 2003-09-01 Junichi Uekawa * debian/changelog: 0.85 * THANKS: update * pbuilder-checkparams (IGNORE_UMOUNT): fix case of --basetgz option when the base.tgz does not exist (pbuilder create). readlink failed if file did not exist. 2003-08-27 Junichi Uekawa * Documentation/pbuilder-doc.xml (PBUILDER_UML_IMAGE): Update documentation to note updates that I am aware of. * THANKS: update the list. * pbuilder.8: fix unintended italic in manual page Subject: Bug#207390: italicized period in manual page From: Matt Kraai * pbuilder-buildpackage (BUILD_PID): add default BUILDRESULTGID for chown. 2003-08-25 Junichi Uekawa * debian/README.Debian (Testsuite): update README.Debian 2003-08-22 Junichi Uekawa * pbuilder-user-mode-linux: error out when COW file cannot be created. (UML_DEBUGMODE): add --buildplace option. * pbuilder-user-mode-linux.1: update manual page since some information are missing. Add information on --buildplace option. 2003-08-20 Junichi Uekawa * pbuilder-user-mode-linux: give a more helpful message when /dev/ubd/1 is not mountable. Give a warning message that running as uid=0 is not supported. * pbuilder-buildpackage (BUILD_PID): Use chown "userid:" instead of "userid" 2003-08-15 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): Document uml-net group requirement for user-mode-linux. * THANKS: update. * pbuilder-user-mode-linux (UML_EXITCODE): check against no --distribution flag. pbuilder-user-mode-linux errored out when no distribution was set. From: Marek Habersack * pbuilder-user-mode-linux.1: update document to note that pbuilder-uml shouldn't be ran as root. 2003-08-09 Junichi Uekawa * pbuilder-modules (pbuilder-options): rm -r replacement, clean_subdirectories, use this instead of rm -rf, to check for -xdev. 2003-08-05 Junichi Uekawa * pbuilder-user-mode-linux: add 'rw' option to linux invocation to mount / read-write. 2003-08-01 Junichi Uekawa * pbuilder-user-mode-linux (UML_EXITCODE): remove |lv from pipe, it's not needed. Subject: Bug#203732: pbuilder-uml: Missing dependency on lv From: Daniel Schepler 2003-07-27 Junichi Uekawa * pbuilder-user-mode-linux: support --distribution flag for pbuilder-user-mode-linux #176095 2003-07-26 Junichi Uekawa * debian/pbuilder.links: Try symlinking /etc/pbuilderrc to /etc/pbuilder/pbuilderrc 2003-07-22 Junichi Uekawa * Documentation/pbuilder-doc.xml: document update, to clarify a little bit on where the example for running lintian is. 2003-07-08 Junichi Uekawa * pbuilderrc.5: update to note about user-mode-linux quirks. * pbuilder-uml.conf.5: note that APTCACHEHARDLINK * Documentation/pbuilder-doc.xml: document the error for LOGNAME not defined warning, Invalid cross-device link error, and conflict against essential being a bad idea. 2003-07-03 Junichi Uekawa * pbuilder-user-mode-linux.1: document that. * pbuilder-user-mode-linux (UML_DEBUGMODE): interpret --configfile itself and then pass to pbuilder. 2003-06-07 Junichi Uekawa * pbuilder.8: update documentation so that --othermirror is obvious. 2003-05-17 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): add notes on pbuilder backport. 2003-04-24 Junichi Uekawa * Documentation/pbuilder-doc.xml: note that --configfile option is useful for switching distributions. 2003-04-20 Junichi Uekawa * pbuilder-satisfydepends: use Source: rather than Format. Format does not exist on very old .dsc files. 189691 Daniel Schepler 2003-04-19 Junichi Uekawa * pbuilder: update copyright date. * pbuilder-buildpackage (PACKAGENAME): moved around D hook location so that D hook is called before satisfying build-deps. update copyright date. * pbuilder.8: minor improvements on the documentation wording. 2003-04-17 Junichi Uekawa * Documentation/pbuilder-doc.xml (PBUILDER_UML_IMAGE): update and document /tmp peculiarity. * pbuilder-user-mode-linux.1: document /tmp peculiarity 2003-04-11 Junichi Uekawa * debian/TODO: update TODO, bind mount, and other entries. 2003-04-10 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): added id tags to facilitate with wysidocbookxml 2003-04-09 Junichi Uekawa * pbuilder-user-mode-linux (EXTRAOPT): Change to use new hostfs options for user-mode-linux 2003-04-08 Junichi Uekawa * Documentation/pbuilder-doc.xml: update documentation a bit. * debian/TODO: update the TODO file wrt bind-mount/hostfs for UML. * pbuilder-user-mode-linux: Do not try to umount the mountpoints. There is no point in doing that. This works around the problem of non-upgradable UML. * pbuilder-modules (pbuilder-options): support IGNORE_UMOUNT option, and do not umount. * pbuilder-checkparams (IGNORE_UMOUNT): split --no-targz and --internal-build-uml. new variable IGNORE_UMOUNT, for ignoring umount. 2003-04-06 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): document bindmounts option. * pbuilderrc: add reference to the manual page in the example configuration file. * pbuilder-user-mode-linux (UML_DEBUGMODE): --bindmounts option. * debian/TODO: remove bind-mount from TODO. * pbuilder.8: document --bindmounts. * pbuilder-modules (pbuilder-options): add --bindmounts option * pbuilder-checkparams (PRESERVE_BUILDPLACE): add --bindmounts option * AUTHORS: update * pbuilderrc.5: document BINDMOUNTS option 2003-04-05 Sam Hartman * pbuilder: Remove warning about bind filesystems as it is no longer true. * pbuilder-modules : Support Bind mounts * pbuilderrc (BINDMOUNTS): New option 2003-04-05 Sam Hartman * pbuilder-modules (cleanbuildplace): Use find not rm -rf to clean up; avoid crossing out of the chroot on bind mounts. 2003-03-30 Junichi Uekawa * Documentation/pbuilder-doc.xml (PBUILDER_UML_IMAGE): spell-checked 2003-03-17 Junichi Uekawa * Documentation/pbuilder-doc.xml: add new FAQ entry on using apt cache for pbuilder files. 2003-03-12 Junichi Uekawa * pbuilder-modules (pbuilder-options): fix applying of preserve-buildplace patch. * pbuilder-checkparams (PRESERVE_BUILDPLACE): thinko fix. do not unset buildresult. 184420,184422 2003-03-11 Junichi Uekawa * pbuilder-buildpackage (PACKAGENAME): add missing PACKAGENAME. duh. * pbuilder-satisfydepends: unquote checkbuilddep_versiondeps ${CURRENTREALPKGNAME} * pbuilder-checkparams (PRESERVE_BUILDPLACE): the next day bug. let -buildresult '' to set BUILDRESULT to ''. 2003-03-10 Junichi Uekawa * pbuilder-checkparams (PRESERVE_BUILDPLACE): support pbuilder-user-mode-linux invocation for --buildresult. * pbuilder.8,pbuilder-createbuildenv,pbuilder-updatebuildenv: change hook name to E. * debian/rules: add check target for build. * Makefile (check): add check target to makefile, to see if there is any syntax error. * pbuilder-updatebuildenv: support --preserve-buildplace apply things from Daniel Schepler * pbuilder-satisfydepends: support --preserve-buildplace support Format: field. * pbuilder-modules (pbuilder-options): support --preserve-buildplace * pbuilder-buildpackage (PACKAGENAME): support --preserve-buildplace * pbuilder-buildpackage-funcs: support --preserve-buildplace * pbuilder-createbuildenv (DEBOOTSTRAPSCRIPT): support --preserve-buildplace * pbuilder-checkparams (PRESERVE_BUILDPLACE): add PRESERVE_BUILDPLACE * pbuilder.8: update docs to add --preserve-buildplace * pbuilder-satisfydepends: quote some strings... trying to be pedantic * pbuilder-buildpackage-funcs: unset LOGNAME for when building with real root privilage. thanks Barak Pearlmutter * pbuilder.8: document X hooks which were previously undocumented. * pbuilder-user-mode-linux (BUILDING_DSC_FILE): use readlink on real existing files. GNU "readlink -f " exits with an exit code of 1 when the file does not exist, debianutils readlink did not. * pbuilder-runhooks (hooks): do not call readlink here, since the file may not exist. * pbuilder-checkparams (USE_PKGNAME_LOGFILE): use readlink on real existing files. * pbuilder-buildpackage (PACKAGENAME): use readlink on real existing files. 2003-03-09 Junichi Uekawa * pbuilder.8: fix typo From: Tommaso Moroni Subject: Bug#184049: pbuilder: typo error in man page * THANKS: update. * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): add doc on PS1 setting for pbuilder. 183861: distinctive prompt Barak Pearlmutter 2003-03-06 Junichi Uekawa * AUTHORS: update authors and thanks file. 2003-03-01 Junichi Uekawa * pbuilder-satisfydepends: Try giving out messages on fail to install, and bugfix. from Daniel Schepler * Documentation/pbuilder-doc.xml: update documentation info somewhat to match what dxml-db2latex expects. 2003-02-22 Junichi Uekawa * pbuilder: check if it is in UML mode, and do not warn if it is in UML mode. 2003-02-14 Junichi Uekawa * Documentation/pbuilder-doc.xml: update ssh installing script to allow X forwarding. 2003-02-13 Junichi Uekawa * Documentation/pbuilder-doc.xml: document an example script to start up ssh inside pbuilder-uml. * pbuilder-checkparams: support execute option. * Documentation/pbuilder-doc.xml: document pbuilder-uml more, and execute command. * pbuilder-modules: update copyright statement. document "execute" * pbuilder-user-mode-linux.1: document "execute" command * pbuilder-user-mode-linux: implement execute command. * pbuilder.8: document "execute" * pbuilder: "execute" command. 2003-02-10 Junichi Uekawa * pdebuild: set pdebuild here as well. * pbuilder-checkparams (BASEBUILDPLACE): support the convention, and do not exec < /dev/null in that case. * pdebuild-user-mode-linux (PBCURRENTCOMMANDLINEOPERATION): set to pdebuild-user-mode-linux. * pbuilder-user-mode-linux.1: fix manual to have pbuilder-uml.conf.5 * Makefile (install): add pdebuild-user-mode-linux * pdebuild-user-mode-linux.1: Initial manual page. * pdebuild-user-mode-linux: try making a new script that uses pbuilder-user-mode-linux for building instead of pbuilder. 2003-02-04 Junichi Uekawa * pbuilder-buildpackage-funcs: use "cp -p" in copydsc 2003-01-29 Junichi Uekawa * pbuilder: add warning on never to bind mount on login. * pbuilder-uml.conf.5: document the FQDN lookup quirk. * pbuilder-uml.conf (UML_HOSTNAME): default value is the hostname of the host system. 2003-01-28 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): document that. * pbuilder.8: document apt-get update hook. * pbuilder-satisfydepends: apply patch from Daniel Schepler , fixing obvious typos. Bug: 178552 2003-01-18 Junichi Uekawa * THANKS: update. * pbuilder-modules (pbuilder-options): doit=cp instead of "ln -s". in pbuilder-modules. Thanks to eichin@metacarta.com (Mark Eichin) for reporting this. Bug: 177173 2003-01-16 Junichi Uekawa * pbuilder-modules (save_aptcache,recover_aptcache): use "find | while read ; " combination to go over the limits of shell globbing. #176872, reported by "Michel Dänzer" . 2003-01-10 Junichi Uekawa * pbuilder-user-mode-linux: use /var/cache/pbuilder/pbuilder-umlresult as directory to mount hostfs for result. (UML_DEBUGMODE): --uml-debugmode option to enable trace of shell. * Makefile (install): create pbuilder-umlresult dir. * pbuilder-uml.conf.5: document UML_BUILDRESULT * pbuilder-uml.conf (UML_BUILDRESULT): add UML_BUILDRESULT= * pbuilder-user-mode-linux (EXTRAOPT): add support for exitcode. Thanks mdz for the hint! (UML_EXTRAOPT): try and implement BUILDRESULT 2003-01-09 Junichi Uekawa * pbuilder-user-mode-linux: use /var/cache/pbuilder/pbuilder-mnt instead of /mnt, which may be used for other tasks. PBUILDER_COWFILENAME is buildplace/$$.cow. * Makefile (install): install /var/cache/pbuilder/pbuilder-mnt dir. * pbuilder-user-mode-linux (UML_EXTRAOPT): --buildresult ignore. * pbuilder-user-mode-linux.1: document --uml-hostname * pbuilder-user-mode-linux: set hostname inside UML. (UML_EXTRAOPT): --uml-hostname option. * pbuilder-uml.conf.5: document * pbuilder-uml.conf (UML_HOSTNAME): add variable for hostname 2003-01-08 Junichi Uekawa * pbuilder-user-mode-linux (UML_EXTRAOPT): --logfile option. * pbuilder-user-mode-linux.1: and document these new options. * pbuilder-user-mode-linux (OPERATION): --override-config option passed through to pbuilder. (EXTRAOPT): quote ${EXTRAOPT} which is probably meant to be passed through. (UML_EXTRAOPT): define as variable that is used to pass uml extra options. and, of course, add these options: --binary-arch --override-config --timeout --http-proxy --configfile --hookdir --aptconfdir * debian/rules (binary-arch): add manual page installation * pbuilder-uml.conf.5: new manual page * pbuilder-uml.conf (UML_MEM): Use 128MB memory per default, it would be better to use that. * pbuilder-user-mode-linux: export HOME inside UML Try and umount the device afterwards, so that it will be clean-mount the next time. thanks: Matt Zimmerman (OPERATION): --uml-mem option. * pbuilder-checkparams: update copyright * pdebuild: update copyright info. * update copyright information to add 2003. * pbuilder-user-mode-linux: LOGNAME is set as soon as entering UML. 2003-01-07 Junichi Uekawa * Documentation/pbuilder-doc.xml (PBUILDER_UML_IMAGE): update notes on parallel-invocation of pbuilder-uml * Documentation/pbuilder-doc.xsl: stylesheet * Documentation/Makefile (%.html): build rules updated thusly. * Documentation/pbuilder-doc.css: add new file to match netfort page style. * Documentation/pbuilder-doc.xml: update documentation and add chapter on pbuilder-uml, document that pbuilder-uml actually works, and some detailed nodes on how to use them. Add FAQ entry on how to specify extra apt sources. fix encoding to be utf-8 * pbuilder-user-mode-linux.1: update doc to document that configuration files for pbuilder is now read in. * pbuilder-user-mode-linux: add debug info, to print out the command-line used for running uml. export TMPDIR=/tmp inside the chroot inside UML. change UML_CHROOT_MOUNTPOINT from /tmp/ubd1 to /mnt, and do not mkdir UML_CHROOT_MOUNTPOINT. fix /tmp creation script so that /tmp is writable when not using tmpfs. use tempfile in creating the COW file. clean COW file after finishing. remove temporary file created by tempfile, because UML doesn't seem to like the zero-byte file. (POSSIBLE SECURITY PROBLEM) extra cleanup added for cleanup_function * pbuilder-uml.conf (BUILDPLACE): add definition of BUILDPLACE for pbuilder-uml. It is probably needed, because BUILDPLACE needs to be writable by the user for UML, while it is not for pbuilder. * pbuilder-user-mode-linux: load config for pbuilder also, before trying to load other things. 2003-01-06 Junichi Uekawa * Documentation/pbuilder-doc.xml (EXTRAPACKAGES): document possible usage of pbuilder for dchroot. * pbuilder.8: document --no-targz * pbuilder-checkparams (USE_PKGNAME_LOGFILE): allow --no-targz option as alias to --internal-build-uml * pdebuild (ARCHITECTURE): use dpkg-architecture to find out the architecture. sign changes file not dsc file. pointed out by Andrew Lau , bug #175432 2003-01-04 Junichi Uekawa * debian/control (Description): fix suggests to pbuilder-uml 2003-01-03 Junichi Uekawa * Documentation/pbuilder-doc.xml: add notes on what kind of things to expect when mass-autobuilding. 2002-12-31 Junichi Uekawa * debian/README.Debian (Testsuite): update the number of packages which do build and not build. 5000 builds -> 6000 1000 fail -> 600 * Documentation/pbuilder-doc.xml: import some parts from README.Debian. * debian/README.Debian (Try): removed some parts to XML doc. * Documentation/pbuilder-doc.xml: add notes on how to set up pentium-builder for building. * Documentation/Makefile (install): add install method. * Makefile (install): add install method for docs. * Documentation/pbuilder-doc.xml: history of pbuilder moved to here. * AUTHORS: history and background of pbuilder is moved over and remove from here. * Documentation/pbuilder-doc.xml: add docs on pbuildd. * pbuildd/Makefile (install): add /var/cache/pbuilder/pbuildd dir 2002-12-30 Junichi Uekawa * Makefile: install pbuildd files as well. * pbuildd/buildd.sh: modified for pbuilder. * pbuildd/buildd-config.sh (HOOKDIR): modified for pbuilder. 2002-12-28 Junichi Uekawa * Documentation/Makefile (all): documentation makefile. * Documentation/pbuilder-doc.xml: start to create documentation. 2002-12-23 Junichi Uekawa * pbuilder-satisfydepends: add note of which versions to try in pdebuild. 2002-12-18 Junichi Uekawa * pbuilder-user-mode-linux: try to use COW device. I had a typo, fix it. * pbuilder-user-mode-linux.1: document 2002-12-16 Junichi Uekawa * THANKS: update. * pdebuild.1: More vigorously document pdebuild option, which changed. From: Jose Carlos Garcia Sogo . 2002-12-15 Junichi Uekawa * THANKS: update this file, thinking that this file is probably autogenerated from ChangeLog on other projects... * pbuilder-modules (pbuilder-options): modify the ordering of scripts so that concurrent-build experience is more active. (pbuilder-options): extraction does not need the locking, does it? I can ignore the locks while extracting. Creating the tarball needs to lock the file. mv will not replace inodes, and running extraction routines will not be affected by it. Therefore I am removing the locking completely from extraction routines. At request of Sam Couter 2002-12-13 Junichi Uekawa * examples/D10tmp: fix error in script. * examples/C10shell: example of shell invocation. * Makefile (install): install dpkg-i example. * examples/B91dpkg-i: add new file to demonstrate using script to automatically install packages. * README: update the readme file for a change, since Andrew Stribblehill noticed a mistake. 2002-12-12 Junichi Uekawa * pbuilder-buildpackage (PACKAGENAME): add banner for logfile. * debian/control (Recommends): add devscripts to recommends * pbuilder-checkparams (USE_PKGNAME_LOGFILE): fix typo * pbuilder-modules (pbuilder-options): add reference to pkgname-logfile to help text. * pbuilder.8: documentation of pkgname-logfile moved closer to --logfile option. * ChangeLog: spell-checked. * pbuilder.8: document --pkgname-logfile option. From Michael Banck , requested feature. * pbuilder-checkparams (PBUILDER_BUILD_LOGFILE): logfile name is stored in PBUILDER_BUILD_LOGFILE (PBUILDER_BUILD_LOGFILE): add --pkgname-logfile option for using logfile with pkgname-version.log (USE_PKGNAME_LOGFILE): make this variable be usable only as command-line option, and not for configuration. * pbuilderrc.5: update doc to document AUTO_DEBSIGN * pdebuild: force set BUILDRESULT from pdebuild options when invoking pbuilder, so that config from pdebuild is used inside pbuilder. (PKG_SOURCENAME, PKG_VERSION): define as version and source base name. (debsign): invoke debsign when AUTO_DEBSIGN=yes. From Andrew Lau , requested feature. * pdebuild.1: update docs, so that --buildresult quirk is documented, and --auto-debsign is documented. * pbuilder-checkparams: change option ordering so that internal options go at bottom. --auto-debsign option added for setting AUTO_DEBSIGN=yes (BINARY_ARCH): move buildsourceroot and pbuilderroot option around so that they are in the pdebuild options section. * pbuilder.8: fix the documentation to clarify that A is executed after satisfying the build-depends. 2002-12-07 Junichi Uekawa * pbuilder-buildpackage-funcs: apply patch from Daniel Schepler , to properly use BUILDOPT in checkbuilddep. 2002-11-27 Junichi Uekawa * pbuilder-buildpackage-funcs: try and implement binary-arch option. * pbuilder-checkparams (--binary-arch): set DEBBUILDOPTS. * pbuilder.8: document --binary-arch * pbuilder-modules (pbuilder-options): add doc of binary-arch * pbuilder-checkparams (OVERRIDE_APTLINES): --binary-arch option. (BINARY_ARCH): set initial value to "no". thanks: Daniel Schepler * THANKS: update. * pbuilder-buildpackage-funcs (createbuilduser): do not set HOME here. * pbuilder-buildpackage (PACKAGENAME): make HOME to be "/tmp/buildd". thanks: Clint Adams 2002-11-25 Junichi Uekawa * THANKS: update list of people. * pbuilder-modules (pbuilder-options): display value of $BASETGZ instead of base.tgz Bug: 167813 Thanks: Michael Banck * pbuilder-user-mode-linux: Fix the order of conffile loading. Bug: 167808 Thanks: Peter Hawkins 2002-11-12 Junichi Uekawa * debian/README.Debian: update documentation a little-bit. 2002-10-30 Junichi Uekawa * pbuilder.8: update documentation for --debemail, it was wrong. * pbuilderrc.5: update documentation for DEBEMAIL, it was wrong. * pbuilderrc (HOOKDIR): Set default DEBEMAIL to "". * pbuilder-satisfydepends: remove the debug thing. * debuild-pbuilder: a better handling of directory, copied from pdebuild. * pbuilder-satisfydepends: make CHROOTEXEC invocation to make it less ambiguous, for versiondeps. 2002-10-29 Junichi Uekawa * pbuilder-buildpackage-funcs: unset LOGNAME * pbuilder-satisfydepends (--continue-fail): add a new feature to debug. * pbuilderrc.5: update * pbuilder.8: update documentation slightly. * THANKS: update thanks file. * pbuilder-buildpackage-funcs: LOGNAME is set to BUILDUSERNAME, and Create shadow entry for inside chroot on fakerooting as well. Reported by: Robert Bihlmeyer * pbuilder-buildpackage: Changed to work with trap instead of other kludgey alternatives. * pbuilder-buildpackage-funcs: fixed to use trap for buildpackage hooks. 2002-10-27 Junichi Uekawa * pbuilder-checkparams (BASEBUILDPLACE): check for user-mode-linux operation, Reported by ranty@debian.org Bug: #166194 2002-10-23 Junichi Uekawa * pbuilder-buildpackage-funcs: clean up when dsc-file copying into chroot fails. 2002-10-19 Junichi Uekawa * debian/TODO: beautify file, with Todoo mode. * debian/control (Standards-Version): 3.5.7 * and revert the change made.... fuser will kill anything that uses proc, which may be outside the chroot (including X and other things..) * pbuilder-modules (umountproc): use "umount_one". * debian/control (Suggests): add psmisc Suggestion. * pbuilder-modules (umount_one): generic umount module split out from umountproc Add FORCE_KILL_WITH_FUSER option, kills processes with fuser if "yes" Reported by Thorsten Sauter 2002-10-18 Junichi Uekawa * pbuilder-buildpackage-funcs: hack HOME variable. 2002-10-16 Junichi Uekawa * THANKS: update. * AUTHORS: update, add hmh. * debian/README.Debian: update a lot. * pbuilderrc.5: update doc to mention --override-config * pbuilder.8: update doc to mention that sid/sarge/woody are supported. update doc to mention --override-config * pbuilder-modules: update the help text a little bit. * pbuilder-checkparams (OVERRIDE_APTLINES): new option --override-config to install new aptlines. * pbuilder-modules (extractbuildplace): Check that OVERRIDE_APTLINES is not set, and rewrite apt lines. Bug: #164473 * pbuilder-satisfydepends: apply patch from hmh, thanks! It now searches for a version that matches. Bug: #164919 2002-10-11 Junichi Uekawa * pbuilder-modules (create_basetgz): new function add file locking (extractbuildplace) add file locking. * pbuilder-updatebuildenv: use create_basetgz * pbuilder-createbuildenv (DEBOOTSTRAPSCRIPT): make error handling more fine-grained, and add more handling for error cases. (create_basetgz): move function over to -modules. and use it. 2002-10-05 Junichi Uekawa * pbuilder-buildpackage (BUILD_PID): fix more quoting problems with PID. $! cannot be inside "". It seems. * debian/TODO: note that TODO item, support building without root is implemented. Running as non-root in the build process is implemented through the fakeroot options, so that entry goes away, too. * AUTHORS: update the little story. * THANKS: update a bit. * pbuilder-buildpackage (BUILD_PID): quote properly 2002-09-29 Junichi Uekawa * pbuilderrc.5: update manpage to document the vars. * pbuilder-buildpackage (BUILD_PID): preserve file permissions on copying the result. (BUILDRESULTUID,BUILDRESULTGID): define UID and GID. chown and chgrp to the user ID after build. 2002-09-25 Junichi Uekawa * pbuilder-runhooks (hooks): do not error out if there are no hooks in the hookdir. * debuild-pbuilder.1: fix typo. update date. add author and URL. * pdebuild.1: add author, URL. * pbuilder.8: update date and add URL. * pbuilderrc.5: add credits and upstream URL. update date. 2002-09-24 Junichi Uekawa * pbuilder-modules (copy_local_configuration): fix the rules to copy over to work around debootstrap breakage with handling of symlinks. Remove the target file prior to copy. 2002-09-22 Junichi Uekawa * THANKS: updated thanks file. * pbuilder.8: update documentation, to clarify a bit. * pbuilder-checkparams (BUILDPLACE): Change command-line parsing so that it should fix problems with specifying configfile. (BUILDPLACE): only set CHROOTEXEC if it is empty. set CHROOTEXEC to be empty at the start of param checking. * pbuilder-createbuildenv: use pbuilder-modules code for copying etc/ files. * pbuilder-modules: split out the function to copy local configuration. 2002-09-19 Junichi Uekawa * debian/rules (binary-indep): install pbuilder-user-mode-linux.1 manpage. * pbuilder-user-mode-linux.1: document with more details. * pbuilder-user-mode-linux (OPERATION): add distribution option. 2002-09-18 Junichi Uekawa * pbuilder-uml.conf: change configuration file so that it is more generic. * debian/pbuilder-uml.files: add more files to be moved over to pbuilder-uml package. * pbuilder-user-mode-linux: change the filenames to pbuilder.conf pbuilder-uml.conf * pbuilder-user-mode-linux.1: document config files. * pbuilder-uml.conf: change filename. * uml.conf: new file created. * pbuilder-user-mode-linux (BUILDING_DSC_FILE): add update after create. It should work better. (UML_MOUNT_TMPFS): add config file loading routine. 2002-09-17 Junichi Uekawa * pbuilder-user-mode-linux (UML_MOUNT_TMPFS): fix update whatever. * pbuilder-user-mode-linux.1: create manual page * pbuilder-user-mode-linux (BUILDING_DSC_FILE): update script to get it working. 2002-09-16 Junichi Uekawa * pbuilder-user-mode-linux (BUILDING_DSC_FILE): change the construct of the script. (UML_MOUNT_TMPFS): make chroot tmpfs mounting optional. * debian/control (Depends): add Source-Version dependency, because some modules are going to be incompatible with each other. * debian/pbuilder-user-mode-linux.files: create file. Move pbuilder-user-mode-linux * debian/rules: move the thing from binary-arch to binary-indep * debian/control (Depends): update depends of debootstrap to 0.1.17.9 * pbuilder-user-mode-linux: add trapping and cleaning up routine. * pbuilder-modules: modify things shuffling around until it works... * pbuilder-user-mode-linux (BUILDING_DSC_FILE): add call to pbuilder update. * pbuilder-updatebuildenv: check for INTERNAL_BUILD_UML and ignore the basetgz creation in UML. * pbuilder-modules: remove invocation of hostname from uml. * debian/control (Depends): require 1.31.1 or greater of debianutils for readlink * Makefile (install): add pbuilder-user-mode-linux to install target * debian/control (Depends): add depends on debianutils, for readlink * pbuilder-user-mode-linux (BUILDING_DSC_FILE): use --internal-build-uml * pbuilder-modules (extractbuildplace): change to do less things when INTERNAL_BUILD_UML is specified. (cleanbuildplace): add check for INTERNAL_BUILD_UML * pbuilder-checkparams (--internal-build-uml): new option. * Makefile (install): add pbuilder-buildpackage-funcs to install target * pbuilder-buildpackage (PACKAGENAME): add id tag for calling showbuildbanner * pbuilder-buildpackage-funcs: create new file add banner opt for showbuildbanner * pbuilder-buildpackage: move funcs to /usr/lib/pbuilder/pbuilder-buildpackage-funcs 2002-09-15 Junichi Uekawa * pbuilder-user-mode-linux: experimental file. 2002-09-13 Junichi Uekawa * pbuilder-checkparams (CHROOTEXEC): add --internal-chrootexec option to set CHROOTEXEC variable. * pbuilder-createbuildenv: remove def for CHROOTEXEC * pbuilder-updatebuildenv: ditto * pbuilder-checkparams (CHROOTEXEC): CHROOTEXEC is set in checkparams, instead of -buildpackage etc. 2002-09-09 Junichi Uekawa * AUTHORS: add notes on devfs support. * pbuilder-modules: add devfs support Thanks to: "Dagfinn Ilmari Manns?er" * pbuilderrc (USEDEVFS): change default value on USEDEVFS * pbuilderrc.5: update docs on noninteractive. document USEDEVFS 2002-09-06 Junichi Uekawa * debian/changelog: 0.36 * debian/rules (binary-arch): add manpage install * pbuilder-loadconfig: create from checkparams. a module to load config files only. * debuild-pbuilder: add debuild wrapper script. * debuild-pbuilder.1: add manpage * pbuilder-buildpackage (BUILD_PID): use "trap" a bit, so that error checking can be done at all. 2002-08-27 Junichi Uekawa * pbuilder-buildpackage (BUILD_PID): race condition with termination. Make it display message before KILL. 2002-08-24 Junichi Uekawa * pbuilder-buildpackage (BUILD_PID): add error checking for "kill" 2002-08-20 Junichi Uekawa * pbuilder-buildpackage (BUILD_PID): add better messages for build-termination process. more verbose execution logs, better messages * debian/docs: add THANKS. * pbuilder-modules: document --timeout option. * pbuilder.8: document --timeout option * pbuilder-checkparams: add --timeout option * pbuilderrc.5: document TIMEOUT_TIME * pbuilder-buildpackage (CHROOTEXEC): add missing executehooks "C" to a case. (CHROOTEXEC): clean the command-line a bit, so that it's easier to use. (BUILD_PID): add timeout for build process. 2002-08-18 Junichi Uekawa * AUTHORS: added section about History and background of pbuilder. 2002-08-07 Junichi Uekawa * debian/changelog: 0.35 release * debian/control (Depends): stricter depends. * debian/README.Debian: update notes 2002-08-06 Junichi Uekawa * pbuilderrc.5: update manpage to make it more verbose 2002-07-23 Junichi Uekawa * Makefile (install): add examples dir. (install): install B90linda, D10tmp (install): install them executable, probably. 2002-07-17 Junichi Uekawa * debian/changelog: 0.33 release * THANKS: Created file to credit people. 2002-07-11 Junichi Uekawa * pbuilder-updatebuildenv: fix the && usage to use if. 2002-07-07 Junichi Uekawa * pbuilderrc.5: document that "" for APTCACHE will turn off the caching, as pointed by Colin Walters * pbuilder.8: add some documentation. 2002-06-20 Junichi Uekawa * examples/B90linda: added an example to use linda. 2002-06-18 Junichi Uekawa * debian/README.Debian: update README.Debian to note of TMPDIR. 2002-05-30 Junichi Uekawa * pbuilder-modules: add suggestion from david@josefine.at 2002-05-26 Junichi Uekawa * pbuilder-modules: use readlink -f to determine the real location of etc/hostname etc. 2002-05-14 Junichi Uekawa * pbuilder-buildpackage: add handler for some .dsc files which contain something after the filenames, like ones which have the undocumented url: field. (e.g. zope-extfile) 2002-05-13 Junichi Uekawa * pbuilder: modified clean target to load pbuilder-checkparams, instead of sourcing the config file directly. Change the test to if conditions. Fixed a thinko. 2002-05-07 Junichi Uekawa * pbuilderrc.5: document USEDEVPTS * pbuilderrc (USEDEVPTS): added USEDEVPTS option, and change to yes. * pbuilder-modules: mount /dev/pts and umount. fixed messages 2002-05-01 Junichi Uekawa * debian/changelog: release 0.27 2002-04-30 Junichi Uekawa * debian/rules (binary-arch): change pbuilder manpage to 8 * pbuilderrc.5: change pbuilder manpage to 8 * pbuilder.1: change pbuilder manpage to 8 * pdebuild.1: change pbuilder manpage to 8 * pbuilderrc.5: updated documentation by comment from Steven M Robbins. I appreciate this! 2002-04-20 Junichi Uekawa * debian/TODO: update a little bit. 2002-04-13 Junichi Uekawa * examples/D10tmp: created TMPDIR creating script * created examples dir, for example script. * pbuilder.1: added notes on manpage 2002-04-05 Junichi Uekawa * pbuilder-buildpackage: "perl dpkg-source" instead of "dpkg-source" for potato. er... this didn't help, reverting. 2002-03-31 Junichi Uekawa * pbuilder-satisfydepends: changed message slightly to make things more visible. 2002-03-24 Junichi Uekawa * pbuilder-satisfydepends: Build-Depends:[SPACE] is not forced. Fixed regexp. for "smurf" 2002-03-13 Junichi Uekawa * pbuilderrc.5: fixed the documentation, somehow --distribution doc was mixed in with --hookdir. refer to pbuilder.1 for --hookdir options. * pbuilder-buildpackage (CHROOTEXEC): executehooks "D" before unpack, and after extract. * pbuilder.1: document new hook "D" * pbuilder-satisfydepends: fix depends regexp, so that multi-line Build-Depends with epoch versions will not fail. * pbuilder-buildpackage: will clean up and exit if satisfydepends fail. * pbuilder-satisfydepends: fixed --echo and --chroot race. It is now possible to specify "--chroot whatever --echo" to debug some chrooting action. "/usr/lib/pbuilder/pbuilder-satisfydepends" reads debian/control and satisfies dependency, outside of chroot. It is rather handy. saveaptcache_umountproc_cleanbuildplace cannot be called from satisfydepends. fixed error message. * pbuilder.1: added notes on "almost obsolete"ness of -m option. 2002-03-12 Junichi Uekawa * pbuilder-satisfydepends: created Modified/forked pbuilder-buildpackage. Should be possible to install build-dependency outside of chroot, for usual operation. -- Do you trust pbuilder parser ? Instead of dpkg --print-architecture, use dpkg-architecture -qDEB_HOST_ARCH It is now possible to debug dependency with pbuilder-satisfydepends --echo --force-version --control controlfile * pbuilder-buildpackage: only run apt-get -y install ${EXTRAPACKAGES} when ${EXTRAPACKAGES} is not "" * debian/TODO: updated, non-root builds using fakeroot are now supported. document $TMPDIR and $HOME problems. * pbuilder-buildpackage: only handle Build-Depends / Control found in Source section and ignore any such entry in package sections.. 2002-03-10 Junichi Uekawa * debian/changelog: add new bug # to changelog. 2002-03-03 Junichi Uekawa * pbuilder.1: fix the documentation, --debbuildopts. Note the default. * pbuilder-checkparams (BUILDPLACE): no longer set DEBEMAIL to nobody@nowhere even if it is "". Just hope that the user has set it to a valid value. * pbuilderrc (DEBEMAIL): nobody@nowhere is the default DEBEMAIL. Configure it! * pbuilderrc, pbuilderrc.5: change default to build source/binary packages. Document it. 2002-02-26 Junichi Uekawa * pbuilder-buildpackage: reversed logic. sort -nr instead of sort in PACKAGEVERSION apt-cache routine. 2002-02-24 Junichi Uekawa * debian/changelog: release 0.24 * pdebuild.1: added better documentation. * pbuilder-buildpackage: add runhooks * pbuilder-runhooks: add quoting. * pbuilder.1: added notes of hooks * pbuilder-createbuildenv: HOOKDIR checking is moved over to runhooks. * pbuilder-updatebuildenv: likewise * pbuilder-runhooks: checks HOOKDIR, and if it's blank, quit. 2002-02-22 Junichi Uekawa * debian/changelog: release 0.23 2002-02-20 Junichi Uekawa * Makefile (install): fixed typo. * pbuilderrc.5: update the doc accordingly. * pbuilder-buildpackage (CHROOTEXEC): add fakeroot to EXTRAPACKAGES when in fakeroot mode. * pbuilderrc (BASETGZ): revert the pbuilderrc change to make fakeroot always installed. It's only required when fakeroot mode of buildpackage is run. Make it so. * pbuilder-buildpackage: most things are now fixed. fakeroot mode now works! * Makefile (INSTALL_DIRECTORY): rewrote the makefile to be a bit better with install. * pbuilder-buildpackage: add fix to chown the directory as well removed some debug string. 2002-02-18 Junichi Uekawa * pbuilder-modules: adds /etc/mailname on extractbuildplace. emacsen should install. * pbuilder-buildpackage: Can now handle ([SPACE]<< version) version relationship. Needed for arpack trying to change the /etc/group string, to make things work. Changed ordering of commands for SUTOUSER. 2002-02-16 Junichi Uekawa * pbuilder-buildpackage: fix ordering, to make the passwd creation work -rfakeroot added to DEBBUILDOPTS automatically. some more typos fixed. very much fixo. * pbuilderrc: added fakeroot to default extrapackages * pbuilderrc.5: added notes. 2002-02-15 Junichi Uekawa * pbuilder.1: document updated, noting of minor details of what option takes effect in what command. * pbuilder-buildpackage: changing it to use the specified uid. EXTRAPACKAGES option is valued within "pbuilder build" * pbuilderrc.5: document BUILDUSERNAME, BUILDUSERID * pbuilderrc (BUILDUSERNAME): added (BUILDUSERID): added 2002-02-14 Junichi Uekawa * debian/TODO: document some known bugs and features. * pbuilder-updatebuildenv: instead of purge lilo, purge $REMOVEPACKAGES Tried to add something like: -o 'DPkg::Options={"--force-confnew";}' to apt-get dist-upgrade, but it doesn't seem to function. * pbuilder-buildpackage: quoting some string redirct the cp error output to /dev/null because it looks ugly. Slight mods to message 2002-02-13 Junichi Uekawa * pbuilder-buildpackage: support for saving the aptcache when build target fails in the middle of installing the build dependency. 2002-02-12 Junichi Uekawa * debian/changelog: 0.22 released, 0.23 started. * pbuilder-updatebuildenv: apt-get clean is handled with ||true * pbuilder-modules: some notes will be given if cache content is empty Added more check. * debian/changelog: updated the changelog, adding notes. 2002-02-11 Junichi Uekawa * pbuilder-buildpackage: added a banner for pbuilder changed the message for build-dependency failure, to make it more "pbuilder" like. 2002-02-10 Junichi Uekawa * debian/TODO: updated TODO * debian/README.Debian (Testsuite): document testsuit. The current testsuite is not individual programs, but the Debian main archive itself. * debian/changelog: update the changelog wrt the problem with debootstrap. * debian/control (Depends): update the depends field to require 0.1.16.2 of debootstrap. There was a bug in 0.1.16 and 0.1.16.1 0.1.15.7 etc. should work, but they no longer exist in the archive, I shouldn't worry about it. * pbuilder-buildpackage: fixed the sed rule to allow for space. * pbuilder-buildpackage: fixing the awk bit to make case-insensitive, and non-intervening. Build-Depends detection should be better now. slight fix in ordering and minor detail. * pbuilder-buildpackage: Build-Depends-Indep etc. field names are handled as case-insensitive. So "BuilD-DePeNDS-inDeP" is a valid field name according to policy. INSTALLPKG and INSTALLPKGMULTI are local vars considering INSTALLPKGMULTI is printed with $0, not $1 (which contains random output) introduced CURRENTREALPKGNAME Using the CURRENTREALPKGNAME variable in depends/conflicts checker. fixed the CURRENTREALPKGNAME to handle packages with build-dependency without space. i.e. PACKAGENAME(>> version) * pbuilder-updatebuildenv: uses recover_aptcache and save_aptcache. * pbuilder-createbuildenv: added recover_aptcache, and save_aptcache to the creation process. * pbuilder-modules: recover_aptcache, save_aptcache function created * pbuilder-buildpackage: moved the recovering the aptcache and saving routine out to -modules. 2002-02-09 Junichi Uekawa * pbuilder-modules: some message change. * pbuilder-buildpackage: Build-[dD]epends, and Build-[Dd]epends-[Ii]ndep, because many packages seem to use Build-depends instead of Build-Depends, and most tools seem to cope with it. Likewise for Build-Conflicts. fix some messages. 2002-02-08 Junichi Uekawa * debian/changelog: release 0.21 * pbuilder-buildpackage: added echobacktime function, and some logging of time, so that the information can be used in tracking the time required. * pdebuild: use the dpkg-buildpackage -r option rather than calling it with $BUILDSOURCEROOTCMD. dpkg-buildpackage does more optimal things. Am I breaking things? * pbuilder-checkparams : adding DEBIAN_FRONTEND=Noninteractive case to the noninteractive mode check. Needed to work around FAI/ sbuild/whateverelse undocumented incompatibility. 2002-02-06 Junichi Uekawa * debian/changelog: updated the changelog. 2002-02-02 Junichi Uekawa * debian/README.Debian: typo fixes. * pbuilderrc.5: checked and fixed typos. * pbuilder-modules: fixed, privilate -> privilege * debian/TODO: fixed typo, added notes. * pbuilder-updatebuildenv: added GPL notice * pbuilder-createbuildenv: added GPL notice * pbuilder-checkparams: added GPL notice * pbuilder-modules: added GPL notice * pbuilder-buildpackage: added GPL notice at top * pbuilder: updated copyright notice to 2001,2002. * pbuilder: remove the unnecessary test -z thing, so that duplicate help message will not appear. * pbuilderrc.5: APTCONFDIR documentation * pbuilder.1: document --aptconfdir added some more comments on "update" option and "--distribution" more notes are added to --buildresult. * pbuilder-modules: when aptconfdir is set, just dump the files inside there to /etc/apt inside chroot. * pbuilder-checkparams: added --aptconfdir * pbuilderrc (APTCONFDIR): new variable. * pbuilder-modules: installing apt-lines will use arbitrary dir to copy the template from. 2002-02-01 Junichi Uekawa * pbuilder-checkparams: --othermirror option parser had a typo. pointed by kov@debian.org 2002-01-31 Junichi Uekawa * debian/TODO: updated documentation in TODO. * debian/changelog, debian/README.Debian: the documented workaround is not a good one, removed the workaround, and mention of it. * debian/README.Debian: updates to the documentation. 2002-01-28 Junichi Uekawa * debian/changelog: updated the changelog. * pbuilder-checkparams: change the --logfile option behavior, it should be able to redirect stderr output better. Read ~/.pbuilderrc * pbuilder.1: typo/spelling mistake fixed. * debian/README.Debian (Notes): added notes on the workaround. 2002-01-27 Junichi Uekawa * pbuilder: modified to use umountproc_cleanbuildplace in "trap" for "pbuilder login" * pbuilder-createbuildenv: added a trap function to cleanbuildplace on exit. some obsolete and unnecessary cleanbuildplace invocation removed. * pbuilder-buildpackage: changed abortingfunction -> umountproc_cleanbuildplace (name change) * pbuilder-modules (umountproc_cleanbuildplace): changed function name. * pbuilder-updatebuildenv: changed aborting function to umountproc_cleanbuildplace, to unify. moved the "trap" invocation to a better location, before loadhooks. 2002-01-24 Junichi Uekawa * pbuilder-updatebuildenv: Aborting function is performed through trap * exit. Probably others too need to be done this way. 2002-01-22 Junichi Uekawa * pbuilder-updatebuildenv: added a aborting function abortprocess, so that any upgrade process that fails will clean up. 2002-01-18 Junichi Uekawa * pbuilder-checkparams: fixed a typo. 2002-01-18 * pbuilder-modules: added documentation for debbuildopts. * pbuilderrc (DEBBUILDOPTS): added a default value for the new option. * pbuilder-buildpackage : hand-applied patch from Daniel Kobras * pbuilder-checkparams: ditto * pbuilder.1: ditto * pbuilderrc.5: ditto * added copyright notice to bottom of ChangeLog * AUTHORS: added Daniel Kobras to the list. Maybe he should join the "THANKS" file, but I don't know if I should be making another file. * debian/TODO: updated 2002-01-15 * pbuilderrc: quoting some text just for the sake of quoting. adding some verbose comments. * pbuilder-checkparams: var emptying at the beginning for DPKG_BUILDPACKAGEOPTS was obsolete, removed. * debian/README.Debian (Testsuite): added notes on testsuites, and how they are doing. * pbuilder: Modify $@ to "$@" as pointed out by Daniel Kobras. 2002-01-15 Junichi Uekawa * pbuilder-checkparams : added routine to load usr/share/pbuilder/pbuilderrc if it exists. * Makefile (install): added usr/share/pbuilder/pbuilderrc default config. This file contains some changelog record for individual files. More generic info should be found in debian/changelog. I should probably create NEWS file, but well... it takes some energy. When pbuilder stabilizes, I will look at doing it. 14 Jan 2002 Junichi Uekawa Copyright (c) 2001-2006 Junichi Uekawa