diff options
Diffstat (limited to 'gnu')
164 files changed, 12765 insertions, 46119 deletions
diff --git a/gnu/bootloader/grub.scm b/gnu/bootloader/grub.scm index d984d5f5e3..fd62f627a0 100644 --- a/gnu/bootloader/grub.scm +++ b/gnu/bootloader/grub.scm @@ -384,7 +384,13 @@ set timeout=~a~%" submenu \"GNU system, old configurations...\" {~%") #$@(map menu-entry->gexp old-entries) (format port "}~%")) - #~())))) + #~()) + (format port " +if [ \"${grub_platform}\" == efi ]; then + menuentry \"Firmware setup\" { + fwsetup + } +fi~%")))) (computed-file "grub.cfg" builder)) diff --git a/gnu/build/linux-boot.scm b/gnu/build/linux-boot.scm index 950a3507f2..3d40a7d05d 100644 --- a/gnu/build/linux-boot.scm +++ b/gnu/build/linux-boot.scm @@ -358,10 +358,10 @@ the last argument of `mknod'." (filter-map string->number (scandir "/proc"))))) (define* (mount-root-file-system root type - #:key volatile-root? options) - "Mount the root file system of type TYPE at device ROOT. If VOLATILE-ROOT? -is true, mount ROOT read-only and make it an overlay with a writable tmpfs -using the kernel built-in overlayfs. OPTIONS indicates the options to use + #:key volatile-root? (flags 0) options) + "Mount the root file system of type TYPE at device ROOT. If VOLATILE-ROOT? is +true, mount ROOT read-only and make it an overlay with a writable tmpfs using +the kernel built-in overlayfs. FLAGS and OPTIONS indicates the options to use to mount ROOT." (if volatile-root? @@ -384,7 +384,7 @@ to mount ROOT." "lowerdir=/real-root,upperdir=/rw-root/upper,workdir=/rw-root/work")) (begin (check-file-system root type) - (mount root "/root" type 0 options))) + (mount root "/root" type flags options))) ;; Make sure /root/etc/mtab is a symlink to /proc/self/mounts. (false-if-exception @@ -474,6 +474,13 @@ upon error." mounts) "ext4")) + (define root-fs-flags + (mount-flags->bit-mask (or (any (lambda (fs) + (and (root-mount-point? fs) + (file-system-flags fs))) + mounts) + '()))) + (define root-fs-options (any (lambda (fs) (and (root-mount-point? fs) @@ -533,6 +540,7 @@ upon error." (mount-root-file-system (canonicalize-device-spec root) root-fs-type #:volatile-root? volatile-root? + #:flags root-fs-flags #:options root-fs-options)) (mount "none" "/root" "tmpfs")) diff --git a/gnu/build/vm.scm b/gnu/build/vm.scm index 89d685b352..9a9e5bd001 100644 --- a/gnu/build/vm.scm +++ b/gnu/build/vm.scm @@ -131,14 +131,7 @@ the #:references-graphs parameter of 'derivation'." ;; The serial port name differs between emulated ;; architectures/machines. " console=" - (if target-arm? "ttyAMA0" "ttyS0")) - - ;; NIC is not supported on ARM "virt" machine, so use a user mode - ;; network stack instead. - ,@(if target-arm? - '("-device" "virtio-net-pci,netdev=mynet" - "-netdev" "user,id=mynet") - '("-net" "nic,model=virtio")))) + (if target-arm? "ttyAMA0" "ttyS0")))) (when make-disk-image? (format #t "creating ~a image of ~,2f MiB...~%" @@ -163,6 +156,7 @@ the #:references-graphs parameter of 'derivation'." ;; CPU with the maximum possible feature set otherwise. "-cpu" "max" "-m" (number->string memory-size) + "-nic" "user,model=virtio-net-pci" "-object" "rng-random,filename=/dev/urandom,id=guixsd-vm-rng" "-device" "virtio-rng-pci,rng=guixsd-vm-rng" "-virtfs" diff --git a/gnu/installer/final.scm b/gnu/installer/final.scm index 855b640030..1b85900912 100644 --- a/gnu/installer/final.scm +++ b/gnu/installer/final.scm @@ -102,7 +102,7 @@ Start COW-STORE service on target directory and launch guix install command in a subshell. LOCALE must be the locale name under which that command will run, or #f. Return #t on success and #f on failure." (let ((install-command - (format #f "guix system init ~a ~a" + (format #f "guix system init --fallback ~a ~a" (%installer-configuration-file) (%installer-target-dir)))) (mkdir-p (%installer-target-dir)) diff --git a/gnu/local.mk b/gnu/local.mk index 3d672ea213..efbd9067bf 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -24,7 +24,7 @@ # Copyright © 2019 John Soo <jsoo1@asu.edu> # Copyright © 2019 Jonathan Brielmaier <jonathan.brielmaier@web.de> # Copyright © 2019 Evan Straw <evan.straw99@gmail.com> -# Copyright © 2019 Brett Gilio <brettg@posteo.de> +# Copyright © 2019 Brett Gilio <brettg@gnu.org> # # This file is part of GNU Guix. # @@ -159,6 +159,7 @@ GNU_SYSTEM_MODULES = \ %D%/packages/docbook.scm \ %D%/packages/docker.scm \ %D%/packages/documentation.scm \ + %D%/packages/drones.scm \ %D%/packages/dunst.scm \ %D%/packages/dvtm.scm \ %D%/packages/easyrpg.scm \ @@ -271,6 +272,7 @@ GNU_SYSTEM_MODULES = \ %D%/packages/iso-codes.scm \ %D%/packages/java.scm \ %D%/packages/java-compression.scm \ + %D%/packages/java-graphics.scm \ %D%/packages/java-maths.scm \ %D%/packages/javascript.scm \ %D%/packages/jemalloc.scm \ @@ -281,7 +283,9 @@ GNU_SYSTEM_MODULES = \ %D%/packages/kawa.scm \ %D%/packages/kde.scm \ %D%/packages/kde-frameworks.scm \ + %D%/packages/kde-multimedia.scm \ %D%/packages/kde-plasma.scm \ + %D%/packages/kde-utils.scm \ %D%/packages/kerberos.scm \ %D%/packages/key-mon.scm \ %D%/packages/kodi.scm \ @@ -711,6 +715,19 @@ dist_patch_DATA = \ %D%/packages/patches/ath9k-htc-firmware-gcc.patch \ %D%/packages/patches/ath9k-htc-firmware-objcopy.patch \ %D%/packages/patches/audacity-build-with-system-portaudio.patch \ + %D%/packages/patches/audiofile-fix-datatypes-in-tests.patch \ + %D%/packages/patches/audiofile-fix-sign-conversion.patch \ + %D%/packages/patches/audiofile-CVE-2015-7747.patch \ + %D%/packages/patches/audiofile-CVE-2018-13440.patch \ + %D%/packages/patches/audiofile-CVE-2018-17095.patch \ + %D%/packages/patches/audiofile-Check-the-number-of-coefficients.patch \ + %D%/packages/patches/audiofile-Fail-on-error-in-parseFormat.patch \ + %D%/packages/patches/audiofile-Fix-index-overflow-in-IMA.cpp.patch \ + %D%/packages/patches/audiofile-Fix-multiply-overflow-sfconvert.patch \ + %D%/packages/patches/audiofile-Fix-overflow-in-MSADPCM-decodeSam.patch \ + %D%/packages/patches/audiofile-division-by-zero-BlockCodec-runPull.patch \ + %D%/packages/patches/audiofile-hurd.patch \ + %D%/packages/patches/audiofile-signature-of-multiplyCheckOverflow.patch \ %D%/packages/patches/automake-skip-amhello-tests.patch \ %D%/packages/patches/avahi-CVE-2018-1000845.patch \ %D%/packages/patches/avahi-localstatedir.patch \ @@ -804,6 +821,7 @@ dist_patch_DATA = \ %D%/packages/patches/elixir-path-length.patch \ %D%/packages/patches/elm-compiler-disable-reactor.patch \ %D%/packages/patches/elm-compiler-fix-map-key.patch \ + %D%/packages/patches/emacs27-exec-path.patch \ %D%/packages/patches/emacs-dired-toggle-sudo-emacs-26.patch \ %D%/packages/patches/emacs-exec-path.patch \ %D%/packages/patches/emacs-fix-scheme-indent-function.patch \ @@ -868,6 +886,7 @@ dist_patch_DATA = \ %D%/packages/patches/gcc-6-source-date-epoch-1.patch \ %D%/packages/patches/gcc-6-source-date-epoch-2.patch \ %D%/packages/patches/gcc-7-cross-mingw.patch \ + %D%/packages/patches/gcc-7-cross-environment-variables.patch \ %D%/packages/patches/gcc-8-cross-environment-variables.patch \ %D%/packages/patches/gcc-8-strmov-store-file-names.patch \ %D%/packages/patches/gcc-9-asan-fix-limits-include.patch \ @@ -938,6 +957,7 @@ dist_patch_DATA = \ %D%/packages/patches/gpm-glibc-2.26.patch \ %D%/packages/patches/gpsbabel-minizip.patch \ %D%/packages/patches/gpsbabel-qstring.patch \ + %D%/packages/patches/grantlee-merge-theme-dirs.patch \ %D%/packages/patches/grep-timing-sensitive-test.patch \ %D%/packages/patches/groovy-add-exceptionutilsgenerator.patch \ %D%/packages/patches/grub-efi-fat-serial-number.patch \ @@ -969,7 +989,6 @@ dist_patch_DATA = \ %D%/packages/patches/hdf4-shared-fortran.patch \ %D%/packages/patches/hdf4-tirpc.patch \ %D%/packages/patches/hdf5-config-date.patch \ - %D%/packages/patches/hdf5-mpi-deprecations.patch \ %D%/packages/patches/hdf5-1.8-mpi-deprecations.patch \ %D%/packages/patches/hdf-eos2-build-shared.patch \ %D%/packages/patches/hdf-eos2-remove-gctp.patch \ @@ -1012,6 +1031,7 @@ dist_patch_DATA = \ %D%/packages/patches/java-xerces-xjavac_taskdef.patch \ %D%/packages/patches/jbig2dec-ignore-testtest.patch \ %D%/packages/patches/kdbusaddons-kinit-file-name.patch \ + %D%/packages/patches/libnftnl-dont-check-NFTNL_FLOWTABLE_SIZE.patch \ %D%/packages/patches/libvirt-create-machine-cgroup.patch \ %D%/packages/patches/libziparchive-add-includes.patch \ %D%/packages/patches/localed-xorg-keyboard.patch \ @@ -1025,6 +1045,8 @@ dist_patch_DATA = \ %D%/packages/patches/kmod-module-directory.patch \ %D%/packages/patches/kmscon-runtime-keymap-switch.patch \ %D%/packages/patches/kpackage-allow-external-paths.patch \ + %D%/packages/patches/kmplayer-aarch64.patch \ + %D%/packages/patches/kmplayer-upstream_Fix-build-with-Qt-5.9.patch \ %D%/packages/patches/kpmcore-fix-tests.patch \ %D%/packages/patches/kpmcore-remove-broken-test.patch \ %D%/packages/patches/kobodeluxe-paths.patch \ @@ -1058,6 +1080,7 @@ dist_patch_DATA = \ %D%/packages/patches/libexif-CVE-2017-7544.patch \ %D%/packages/patches/libexif-CVE-2018-20030.patch \ %D%/packages/patches/libextractor-exiv2.patch \ + %D%/packages/patches/libgeotiff-adapt-test-script-for-proj-6.2.patch \ %D%/packages/patches/libgit2-avoid-python.patch \ %D%/packages/patches/libgit2-mtime-0.patch \ %D%/packages/patches/libgnome-encoding.patch \ @@ -1103,7 +1126,6 @@ dist_patch_DATA = \ %D%/packages/patches/lierolibre-remove-arch-warning.patch \ %D%/packages/patches/lierolibre-try-building-other-arch.patch \ %D%/packages/patches/linkchecker-tests-require-network.patch \ - %D%/packages/patches/linux-libre-active-entropy.patch \ %D%/packages/patches/linux-pam-no-setfsuid.patch \ %D%/packages/patches/lirc-localstatedir.patch \ %D%/packages/patches/lirc-reproducible-build.patch \ @@ -1157,7 +1179,6 @@ dist_patch_DATA = \ %D%/packages/patches/mrrescue-support-love-11.patch \ %D%/packages/patches/mrustc-0.8.0-fix-variable-length-integer-receiving.patch \ %D%/packages/patches/mtools-mformat-uninitialized.patch \ - %D%/packages/patches/mumble-1.2.19-abs.patch \ %D%/packages/patches/mumps-build-parallelism.patch \ %D%/packages/patches/mumps-shared-libseq.patch \ %D%/packages/patches/mumps-shared-mumps.patch \ diff --git a/gnu/packages/admin.scm b/gnu/packages/admin.scm index 33d378310e..1725f2a563 100644 --- a/gnu/packages/admin.scm +++ b/gnu/packages/admin.scm @@ -23,7 +23,7 @@ ;;; Copyright © 2018 Pierre-Antoine Rouby <pierre-antoine.rouby@inria.fr> ;;; Copyright © 2018 Rutger Helling <rhelling@mykolab.com> ;;; Copyright © 2018 Pierre Neidhardt <mail@ambrevar.xyz> -;;; Copyright © 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2019 Björn Höfling <bjoern.hoefling@bjoernhoefling.de> ;;; Copyright © 2019 Jakob L. Kreuze <zerodaysfordays@sdf.lonestar.org> ;;; Copyright © 2019 Hartmut Goebel <h.goebel@crazy-compilers.com> @@ -754,7 +754,7 @@ connection alive.") (define-public isc-dhcp (let* ((bind-major-version "9") (bind-minor-version "11") - (bind-patch-version "13") + (bind-patch-version "14") (bind-release-type "") ; for patch release, use "-P" (bind-release-version "") ; for patch release, e.g. "6" (bind-version (string-append bind-major-version @@ -902,7 +902,7 @@ connection alive.") "/bind-" bind-version ".tar.gz")) (sha256 (base32 - "0z8g81xinqx8j3y2fclxa31dq7zsi9cj9srmvd9agnpwzk4kqgzx")))) + "1pv3bvm9dzyz2kqjkw15sgh0hd5fzsv274v5z6jp9c4nb5130fyr")))) ;; When cross-compiling, we need the cross Coreutils and sed. ;; Otherwise just use those from %FINAL-INPUTS. @@ -1583,7 +1583,7 @@ module slots, and the list of I/O ports (e.g. serial, parallel, USB).") (define-public acpica (package (name "acpica") - (version "20191018") + (version "20191213") (source (origin (method url-fetch) (uri (string-append @@ -1591,7 +1591,7 @@ module slots, and the list of I/O ports (e.g. serial, parallel, USB).") version ".tar.gz")) (sha256 (base32 - "0k6xr9v46pnw8kl7jh23zfafs2vq3gk2sgkmjdf9a8jx8n3aifgd")))) + "1106d5b7q8jlgc2z0gz83jdah1yml4fz5z0jjcs7a52pv00c9am8")))) (build-system gnu-build-system) (native-inputs `(("flex" ,flex) ("bison" ,bison))) @@ -2494,13 +2494,13 @@ a new command using the matched rule, and runs it.") (define-public di (package (name "di") - (version "4.47.2") + (version "4.47.3") (source (origin (method url-fetch) (uri (string-append "https://gentoo.com/di/di-" version ".tar.gz")) (sha256 - (base32 "1g97pp2hznskqlkhl6ppyzgdmv878bcqiwh633kdnm70d1pvh192")))) + (base32 "0m4npba50sf5s61g5z3xd2r7937zwja941f2h3f081xi24c2hfck")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; obscure test failures @@ -2803,15 +2803,16 @@ buffers.") (define-public igt-gpu-tools (package (name "igt-gpu-tools") - (version "1.23") - (source (origin - (method url-fetch) - (uri (string-append "https://cgit.freedesktop.org/xorg/app/" - "intel-gpu-tools/snapshot/" - "igt-gpu-tools-" version ".tar.gz")) - (sha256 - (base32 - "0vzv2i4jfv2pkbqby5k3ap9pzidkmajwqmg3s7wnv8i1h33775iq")))) + (version "1.24") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://gitlab.freedesktop.org/drm/igt-gpu-tools.git") + (commit (string-append "igt-gpu-tools-" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1gpdjs5aj6vsnzwcjvw5bb120lgffvvshi4202phr0bzw3b92ky8")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; many of the tests try to load kernel modules @@ -2824,6 +2825,7 @@ buffers.") (invoke "sh" "autogen.sh")))))) (inputs `(("cairo" ,cairo) + ("elfutils" ,elfutils) ; libdw ("eudev" ,eudev) ("glib" ,glib) ("kmod" ,kmod) @@ -2934,7 +2936,7 @@ you are running, what theme or icon set you are using, etc.") (define-public screenfetch (package (name "screenfetch") - (version "3.9.0") + (version "3.9.1") (source (origin (method git-fetch) (uri (git-reference @@ -2943,7 +2945,7 @@ you are running, what theme or icon set you are using, etc.") (file-name (git-file-name name version)) (sha256 (base32 - "13i7dczbqwhws08zzrdraki1zkqv0qkbgx9c1r8vmg5qr9f7hfzg")))) + "04l8aqr474pb115nagn9f6y48jw92n1qfszgw7dbhgl4mpn95lcr")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) @@ -2990,14 +2992,14 @@ everyone's screenshots nowadays.") (define-public nnn (package (name "nnn") - (version "2.7") + (version "2.8.1") (source (origin (method url-fetch) (uri (string-append "https://github.com/jarun/nnn/releases/download/v" version "/nnn-v" version ".tar.gz")) (sha256 - (base32 "1wvh11iw7s3r8c985s99fqm2l7cn7dkbx7ah3xpk34jvry7j3vg5")))) + (base32 "1g47bndxld875d0xb3pgmlw223mz47p1xcvwym861y6l4zkgiyp0")))) (build-system gnu-build-system) (inputs `(("ncurses" ,ncurses) @@ -3026,7 +3028,7 @@ make it a perfect utility on modern distros.") (define-public thermald (package (name "thermald") - (version "1.9") + (version "1.9.1") (source (origin (method git-fetch) @@ -3035,7 +3037,7 @@ make it a perfect utility on modern distros.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "1ajhivl9jifcf12nbk281yayk7666v65m249aclyli0bz1kh8cfs")))) + (base32 "0iagc3jqpnh6q2fa1gx4wx6r8qg0556j60xr159zqg95djr4dv99")))) (build-system gnu-build-system) (arguments `(#:configure-flags diff --git a/gnu/packages/antivirus.scm b/gnu/packages/antivirus.scm index a723e8bebe..397b94301d 100644 --- a/gnu/packages/antivirus.scm +++ b/gnu/packages/antivirus.scm @@ -44,14 +44,14 @@ (define-public clamav (package (name "clamav") - (version "0.102.0") + (version "0.102.1") (source (origin (method url-fetch) (uri (string-append "https://www.clamav.net/downloads/production/" "clamav-" version ".tar.gz")) (sha256 (base32 - "1qdyj4r39266bmbsd2nwyspm20k9wh3c30awrg8c54y78s61izj8")) + "1mpdgn3isz26hd1j6p8lcb76v8hjs54k1wb655rnil4hv78aig8d")) (modules '((guix build utils))) (snippet '(begin diff --git a/gnu/packages/audio.scm b/gnu/packages/audio.scm index 24c294b8e2..dcd4711513 100644 --- a/gnu/packages/audio.scm +++ b/gnu/packages/audio.scm @@ -13,7 +13,7 @@ ;;; Copyright © 2018 okapi <okapi@firemail.cc> ;;; Copyright © 2018 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; Copyright © 2018 Clément Lassieur <clement@lassieur.org> -;;; Copyright © 2018 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2018 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2018, 2019 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2018 Thorsten Wilms <t_w_@freenet.de> ;;; Copyright © 2018 Eric Bavier <bavier@member.fsf.org> @@ -26,6 +26,8 @@ ;;; Copyright © 2019 Alexandros Theodotou <alex@zrythm.org> ;;; Copyright © 2019 Christopher Lemmer Webber <cwebber@dustycloud.org> ;;; Copyright © 2019 Jan Wielkiewicz <tona_kosmicznego_smiecia@interia.pl> +;;; Copyright © 2019 Hartmt Goebel <h.goebel@crazy-compilers.com> +;;; Copyright © 2019 Nicolas Goaziou <mail@nicolasgoaziou.fr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -467,6 +469,54 @@ and editing digital audio. It features digital effects and spectrum analysis tools.") (license license:gpl2+))) +(define-public audiofile + (package + (name "audiofile") + (version "0.3.6") + (source + (origin + (method url-fetch) + (uri (string-append + "https://audiofile.68k.org/audiofile-" version ".tar.gz")) + (sha256 + (base32 "0rb927zknk9kmhprd8rdr4azql4gn2dp75a36iazx2xhkbqhvind")) + (patches + ;; CVE references according to nixpgs + (search-patches + "audiofile-fix-datatypes-in-tests.patch" + "audiofile-fix-sign-conversion.patch" + "audiofile-hurd.patch" + "audiofile-CVE-2015-7747.patch" + ;; CVE-2017-6829: + "audiofile-Fix-index-overflow-in-IMA.cpp.patch" + ;; CVE-2017-6827, CVE-2017-6828, CVE-2017-6832, CVE-2017-6835, + ;; CVE-2017-6837: + "audiofile-Check-the-number-of-coefficients.patch" + ;; CVE-2017-6839: + "audiofile-Fix-overflow-in-MSADPCM-decodeSam.patch" + ;; CVE-2017-6830, CVE-2017-6834, CVE-2017-6836, CVE-2017-6838: + "audiofile-Fix-multiply-overflow-sfconvert.patch" + "audiofile-signature-of-multiplyCheckOverflow.patch" + ;; CVE-2017-6831: + "audiofile-Fail-on-error-in-parseFormat.patch" + ;; CVE-2017-6833: + "audiofile-division-by-zero-BlockCodec-runPull.patch" + "audiofile-CVE-2018-13440.patch" + "audiofile-CVE-2018-17095.patch")))) + (build-system gnu-build-system) + (inputs + `(("alsa-lib" ,alsa-lib))) + (home-page "https://audiofile.68k.org/") + (synopsis "Library to handle various audio file formats") + (description "This is an open-source version of SGI's audiofile library. +It provides a uniform programming interface for processing of audio data to +and from audio files of many common formats. + +Currently supported file formats include AIFF/AIFF-C, WAVE, and NeXT/Sun +.snd/.au, BICS, and raw data. Supported compression formats are currently +G.711 mu-law and A-law.") + (license license:lgpl2.1+))) + (define-public autotalent (package (name "autotalent") @@ -1111,7 +1161,7 @@ follower.") (define-public fluidsynth (package (name "fluidsynth") - (version "2.0.9") + (version "2.1.0") (source (origin (method git-fetch) (uri (git-reference @@ -1120,7 +1170,7 @@ follower.") (file-name (git-file-name name version)) (sha256 (base32 - "08bhwv0gw7zq1z0b36m2dzxl6zcgvmvaa60nly2wif7rinkprp5n")))) + "0jhla1641rx77va4b6n4shn8srj87rpwvp170byj1bg8z8g89ji1")))) (build-system cmake-build-system) (arguments '(#:tests? #f ; no check target @@ -2823,8 +2873,14 @@ portions of LAME.") ("libtool" ,libtool) ("pkg-config" ,pkg-config))) (arguments - '(#:tests? #f ;no 'check' target - #:configure-flags '("--with-pic") + '(#:tests? #f ;no 'check' target + #:parallel-build? #f ;fails on some systems + #:configure-flags '("--with-pic" + "--enable-cxx" + ;; XXX: The following prevents a build error + ;; because of missing depcomp when C++ bindings are + ;; requested. + "--disable-dependency-tracking") #:phases (modify-phases %standard-phases ;; This is needed for linking the static libraries @@ -3331,7 +3387,7 @@ mixers.") (define-public bluez-alsa (package (name "bluez-alsa") - (version "1.2.0") + (version "2.0.0") (source (origin ;; The tarballs are mere snapshots and don't contain a ;; bootstrapped build system. @@ -3339,11 +3395,19 @@ mixers.") (uri (git-reference (url "https://github.com/Arkq/bluez-alsa.git") (commit (string-append "v" version)))) - (file-name (string-append name "-" version "-checkout")) + (file-name (git-file-name name version)) (sha256 (base32 - "1qinf41wl2ihx54zmmhanycihwjkn7dn1cicq6pp4rqbiv79b95x")))) + "08mppgnjf1j2733bk9yf0cny6rfxxwiys0s62lz2zd2lpdl6d9lz")))) (build-system gnu-build-system) + (arguments + `(#:configure-flags + (list (string-append "--with-alsaplugindir=" + (assoc-ref %outputs "out") + "/lib/alsa-lib") + (string-append "--with-dbusconfdir=" + (assoc-ref %outputs "out") + "/etc/dbus-1/system.d")))) (native-inputs `(("autoconf" ,autoconf) ("automake" ,automake) @@ -3352,6 +3416,7 @@ mixers.") (inputs `(("alsa-lib" ,alsa-lib) ("bluez" ,bluez) + ("dbus" ,dbus) ("glib" ,glib) ("libbsd" ,libbsd) ("ncurses" ,ncurses) diff --git a/gnu/packages/aux-files/linux-libre/5.2-arm-veyron.conf b/gnu/packages/aux-files/linux-libre/5.2-arm-veyron.conf deleted file mode 100644 index 7c1b08aae6..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.2-arm-veyron.conf +++ /dev/null @@ -1,4944 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/arm 5.2.0-gnu Kernel Configuration -# - -# -# Compiler: gcc (GCC) 7.4.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=70400 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y -CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_LZMA is not set -CONFIG_KERNEL_XZ=y -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="debsus" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_USELIB is not set -# CONFIG_AUDIT is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_PSI is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_PREEMPT_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_TASKS_RCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -# CONFIG_CHECKPOINT_RESTORE is not set -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -# CONFIG_SGETMASK_SYSCALL is not set -CONFIG_SYSFS_SYSCALL=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_SYSCALL=y -# CONFIG_BPF_JIT_ALWAYS_ON is not set -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -CONFIG_EMBEDDED=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -# CONFIG_SLAB_FREELIST_RANDOM is not set -# CONFIG_SLAB_FREELIST_HARDENED is not set -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_ARM=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_DMA_USE_IOMMU=y -CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_GENERIC_BUG=y -CONFIG_PGTABLE_LEVELS=3 - -# -# System Type -# -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_BITS_MAX=16 -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_LPC32XX is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP1 is not set - -# -# Multiple platform selection -# - -# -# CPU Core family selection -# -# CONFIG_ARCH_MULTI_V6 is not set -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MULTI_V6_V7=y -# end of Multiple platform selection - -# CONFIG_ARCH_VIRT is not set -# CONFIG_ARCH_ACTIONS is not set -# CONFIG_ARCH_ALPINE is not set -# CONFIG_ARCH_ARTPEC is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_AXXIA is not set -# CONFIG_ARCH_BCM is not set -# CONFIG_ARCH_BERLIN is not set -# CONFIG_ARCH_DIGICOLOR is not set -# CONFIG_ARCH_EXYNOS is not set -# CONFIG_ARCH_HIGHBANK is not set -# CONFIG_ARCH_HISI is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_KEYSTONE is not set -# CONFIG_ARCH_MEDIATEK is not set -# CONFIG_ARCH_MESON is not set -# CONFIG_ARCH_MILBEAUT is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_MVEBU is not set -# CONFIG_ARCH_NPCM is not set - -# -# TI OMAP/AM/DM/DRA Family -# -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_ARCH_OMAP4 is not set -# CONFIG_SOC_OMAP5 is not set -# CONFIG_SOC_AM33XX is not set -# CONFIG_SOC_AM43XX is not set -# CONFIG_SOC_DRA7XX is not set -# end of TI OMAP/AM/DM/DRA Family - -# CONFIG_ARCH_SIRF is not set -# CONFIG_ARCH_QCOM is not set -# CONFIG_ARCH_RDA is not set -# CONFIG_ARCH_REALVIEW is not set -CONFIG_ARCH_ROCKCHIP=y -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_RENESAS is not set -# CONFIG_ARCH_SOCFPGA is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_ARCH_STI is not set -# CONFIG_ARCH_STM32 is not set -# CONFIG_ARCH_SUNXI is not set -# CONFIG_ARCH_TANGO is not set -# CONFIG_ARCH_TEGRA is not set -# CONFIG_ARCH_UNIPHIER is not set -# CONFIG_ARCH_U8500 is not set -# CONFIG_ARCH_VEXPRESS is not set -# CONFIG_ARCH_WM8850 is not set -# CONFIG_ARCH_ZX is not set -# CONFIG_ARCH_ZYNQ is not set - -# -# Processor Type -# -CONFIG_CPU_V7=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_LPAE=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_THUMBEE=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_SWP_EMULATE=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_SPECTRE=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_KUSER_HELPERS=y -CONFIG_VDSO=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_CACHE_L2X0=y -# CONFIG_CACHE_L2X0_PMU is not set -CONFIG_PL310_ERRATA_588369=y -CONFIG_PL310_ERRATA_727915=y -CONFIG_PL310_ERRATA_753970=y -CONFIG_PL310_ERRATA_769419=y -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_DMA_MEM_BUFFERABLE=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_643719=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_754327=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_ERRATA_798181=y -CONFIG_ARM_ERRATA_773022=y -CONFIG_ARM_ERRATA_818325_852422=y -CONFIG_ARM_ERRATA_821420=y -CONFIG_ARM_ERRATA_825619=y -# CONFIG_ARM_ERRATA_852421 is not set -CONFIG_ARM_ERRATA_852423=y -# end of System Type - -# -# Bus support -# -# end of Bus support - -# -# Kernel Features -# -CONFIG_HAVE_SMP=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_ARM_CPU_TOPOLOGY=y -CONFIG_SCHED_MC=y -# CONFIG_SCHED_SMT is not set -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_MCPM is not set -# CONFIG_BIG_LITTLE is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_NR_CPUS=4 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARM_PSCI=y -CONFIG_ARCH_NR_GPIO=288 -CONFIG_HZ_FIXED=0 -# CONFIG_HZ_100 is not set -# CONFIG_HZ_200 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -# CONFIG_HZ_500 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_SCHED_HRTICK=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_GENERIC_GUP=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HW_PERF_EVENTS=y -CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -# CONFIG_ARM_MODULE_PLTS is not set -CONFIG_FORCE_MAX_ZONEORDER=12 -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_UACCESS_WITH_MEMCPY is not set -CONFIG_SECCOMP=y -# CONFIG_PARAVIRT is not set -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -# CONFIG_XEN is not set -CONFIG_STACKPROTECTOR_PER_TASK=y -# end of Kernel Features - -# -# Boot options -# -CONFIG_USE_OF=y -CONFIG_ATAGS=y -# CONFIG_DEPRECATED_PARAM_STRUCT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_CMDLINE="" -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_AUTO_ZRELADDR=y -# CONFIG_EFI is not set -# end of Boot options - -# -# CPU Power Management -# - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set - -# -# CPU frequency scaling drivers -# -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set -# CONFIG_QORIQ_CPUFREQ is not set -# end of CPU Frequency scaling - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_GOV_TEO=y -CONFIG_DT_IDLE_STATES=y - -# -# ARM CPU Idle Drivers -# -CONFIG_ARM_CPUIDLE=y -# CONFIG_ARM_HIGHBANK_CPUIDLE is not set -# end of ARM CPU Idle Drivers -# end of CPU Idle -# end of CPU Power Management - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_NEON=y -# CONFIG_KERNEL_MODE_NEON is not set -# end of Floating point emulation - -# -# Power management options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -# CONFIG_HIBERNATION is not set -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -CONFIG_APM_EMULATION=y -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_PM_GENERIC_DOMAINS_SLEEP=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_CPU_PM=y -# CONFIG_ENERGY_MODEL is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# end of Power management options - -# -# Firmware Drivers -# -# CONFIG_ARM_SCMI_PROTOCOL is not set -CONFIG_ARM_SCPI_PROTOCOL=y -CONFIG_ARM_SCPI_POWER_DOMAIN=y -# CONFIG_FIRMWARE_MEMMAP is not set -# CONFIG_FW_CFG_SYSFS is not set -# CONFIG_TRUSTED_FOUNDATIONS is not set -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_ARM_PSCI_FW=y -# CONFIG_ARM_PSCI_CHECKER is not set -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# Tegra firmware driver -# -# end of Tegra firmware driver -# end of Firmware Drivers - -# CONFIG_ARM_CRYPTO is not set -# CONFIG_VIRTUALIZATION is not set - -# -# General architecture-dependent options -# -# CONFIG_OPROFILE is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_UPROBES=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=8 -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y -CONFIG_64BIT_TIME=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_REFCOUNT_FULL=y -# CONFIG_LOCK_EVENT_COUNTS is not set - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_PLUGIN_HOSTCC="g++" -CONFIG_HAVE_GCC_PLUGINS=y -CONFIG_GCC_PLUGINS=y - -# -# GCC plugins -# -# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set -# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set -# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -CONFIG_GCC_PLUGIN_ARM_SSP_PER_TASK=y -# end of GCC plugins -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_TRIM_UNUSED_KSYMS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_DEV_BSG=y -# CONFIG_BLK_DEV_BSGLIB is not set -CONFIG_BLK_DEV_INTEGRITY=y -# CONFIG_BLK_DEV_ZONED is not set -# CONFIG_BLK_DEV_THROTTLING is not set -# CONFIG_BLK_CMDLINE_PARSER is not set -# CONFIG_BLK_WBT is not set -# CONFIG_BLK_CGROUP_IOLATENCY is not set -# CONFIG_BLK_DEBUG_FS is not set -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set -# end of Partition Types - -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=y -# CONFIG_IOSCHED_BFQ is not set -# end of IO Schedulers - -CONFIG_ASN1=y -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_ELF_FDPIC is not set -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -# CONFIG_BINFMT_FLAT is not set -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_BOUNCE=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_TRANSPARENT_HUGEPAGE=y -# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set -CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y -CONFIG_TRANSPARENT_HUGE_PAGECACHE=y -# CONFIG_CLEANCACHE is not set -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_ZSWAP=y -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -# CONFIG_Z3FOLD is not set -CONFIG_ZSMALLOC=y -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_IDLE_PAGE_TRACKING is not set -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -CONFIG_ARCH_HAS_PTE_SPECIAL=y -# end of Memory Management options - -CONFIG_NET=y -CONFIG_NET_INGRESS=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=y -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=y -# CONFIG_TLS is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_INTERFACE is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE_DEMUX is not set -# CONFIG_IP_MROUTE is not set -CONFIG_SYN_COOKIES=y -# CONFIG_NET_IPVTI is not set -# CONFIG_NET_FOU is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -CONFIG_IPV6_MIP6=m -# CONFIG_IPV6_ILA is not set -# CONFIG_IPV6_VTI is not set -# CONFIG_IPV6_SIT is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_IPV6_SEG6_LWTUNNEL is not set -# CONFIG_IPV6_SEG6_HMAC is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -# CONFIG_BRIDGE_NETFILTER is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -# CONFIG_NETFILTER_NETLINK_ACCT is not set -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NETFILTER_NETLINK_OSF is not set -CONFIG_NF_CONNTRACK=y -# CONFIG_NF_LOG_NETDEV is not set -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -# CONFIG_NF_CONNTRACK_ZONES is not set -CONFIG_NF_CONNTRACK_PROCFS=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -# CONFIG_NF_CONNTRACK_LABELS is not set -# CONFIG_NF_CT_PROTO_DCCP is not set -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CT_PROTO_UDPLITE is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set -# CONFIG_NF_CONNTRACK_FTP is not set -# CONFIG_NF_CONNTRACK_H323 is not set -# CONFIG_NF_CONNTRACK_IRC is not set -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -# CONFIG_NF_CONNTRACK_SNMP is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SANE is not set -# CONFIG_NF_CONNTRACK_SIP is not set -# CONFIG_NF_CONNTRACK_TFTP is not set -# CONFIG_NF_CT_NETLINK is not set -# CONFIG_NF_CT_NETLINK_TIMEOUT is not set -# CONFIG_NF_NAT is not set -# CONFIG_NF_TABLES is not set -CONFIG_NETFILTER_XTABLES=y - -# -# Xtables combined modules -# -# CONFIG_NETFILTER_XT_MARK is not set -# CONFIG_NETFILTER_XT_CONNMARK is not set - -# -# Xtables targets -# -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set -# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set -# CONFIG_NETFILTER_XT_TARGET_HMARK is not set -# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set -# CONFIG_NETFILTER_XT_TARGET_LED is not set -# CONFIG_NETFILTER_XT_TARGET_LOG is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set -# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set -# CONFIG_NETFILTER_XT_TARGET_TEE is not set -# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set -# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set - -# -# Xtables matches -# -# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_BPF is not set -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set -# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y -# CONFIG_NETFILTER_XT_MATCH_CPU is not set -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ECN is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_HL is not set -# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set -# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set -# CONFIG_NETFILTER_XT_MATCH_L2TP is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set -# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set -# CONFIG_NETFILTER_XT_MATCH_OSF is not set -# CONFIG_NETFILTER_XT_MATCH_OWNER is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set -# CONFIG_NETFILTER_XT_MATCH_REALM is not set -# CONFIG_NETFILTER_XT_MATCH_RECENT is not set -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set -# CONFIG_NETFILTER_XT_MATCH_STATE is not set -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -# end of Core Netfilter Configuration - -# CONFIG_IP_SET is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=y -# CONFIG_NF_SOCKET_IPV4 is not set -# CONFIG_NF_TPROXY_IPV4 is not set -# CONFIG_NF_DUP_IPV4 is not set -# CONFIG_NF_LOG_ARP is not set -# CONFIG_NF_LOG_IPV4 is not set -# CONFIG_NF_REJECT_IPV4 is not set -CONFIG_IP_NF_IPTABLES=y -# CONFIG_IP_NF_MATCH_AH is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_TTL is not set -CONFIG_IP_NF_FILTER=y -# CONFIG_IP_NF_TARGET_REJECT is not set -# CONFIG_IP_NF_TARGET_SYNPROXY is not set -# CONFIG_IP_NF_NAT is not set -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -# CONFIG_NF_SOCKET_IPV6 is not set -# CONFIG_NF_TPROXY_IPV6 is not set -# CONFIG_NF_DUP_IPV6 is not set -# CONFIG_NF_REJECT_IPV6 is not set -# CONFIG_NF_LOG_IPV6 is not set -# CONFIG_IP6_NF_IPTABLES is not set -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=y -# CONFIG_BRIDGE_NF_EBTABLES is not set -# CONFIG_BPFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_L2TP is not set -CONFIG_STP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_HAVE_NET_DSA=y -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -CONFIG_ATALK=y -# CONFIG_DEV_APPLETALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_PHONET is not set -# CONFIG_6LOWPAN is not set -# CONFIG_IEEE802154 is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set -# CONFIG_DNS_RESOLVER is not set -# CONFIG_BATMAN_ADV is not set -# CONFIG_OPENVSWITCH is not set -# CONFIG_VSOCKETS is not set -# CONFIG_NETLINK_DIAG is not set -# CONFIG_MPLS is not set -# CONFIG_NET_NSH is not set -# CONFIG_HSR is not set -# CONFIG_NET_SWITCHDEV is not set -# CONFIG_NET_L3_MASTER_DEV is not set -# CONFIG_NET_NCSI is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -CONFIG_BPF_JIT=y -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_DROP_MONITOR is not set -# end of Network testing -# end of Networking options - -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -CONFIG_BT=y -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=y -# CONFIG_BT_RFCOMM_TTY is not set -CONFIG_BT_BNEP=y -# CONFIG_BT_BNEP_MC_FILTER is not set -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y -CONFIG_BT_HS=y -CONFIG_BT_LE=y -# CONFIG_BT_LEDS is not set -# CONFIG_BT_SELFTEST is not set -# CONFIG_BT_DEBUGFS is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=y -CONFIG_BT_HCIBTUSB=y -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -# CONFIG_BT_HCIBTUSB_BCM is not set -# CONFIG_BT_HCIBTUSB_RTL is not set -# CONFIG_BT_HCIBTSDIO is not set -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_BT_MRVL is not set -# CONFIG_BT_ATH3K is not set -# CONFIG_BT_MTKSDIO is not set -# end of Bluetooth device drivers - -# CONFIG_AF_RXRPC is not set -# CONFIG_AF_KCM is not set -CONFIG_WIRELESS=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_CFG80211=y -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_MAC80211=y -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -# CONFIG_MAC80211_MESH is not set -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -# CONFIG_WIMAX is not set -CONFIG_RFKILL=y -CONFIG_RFKILL_LEDS=y -# CONFIG_RFKILL_INPUT is not set -# CONFIG_RFKILL_GPIO is not set -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -# CONFIG_NET_9P_DEBUG is not set -# CONFIG_CAIF is not set -# CONFIG_CEPH_LIB is not set -# CONFIG_NFC is not set -# CONFIG_PSAMPLE is not set -# CONFIG_NET_IFE is not set -# CONFIG_LWTUNNEL is not set -CONFIG_GRO_CELLS=y -CONFIG_FAILOVER=m -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_ARM_AMBA=y -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -# CONFIG_PCIEAER_INJECT is not set -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -# CONFIG_PCIE_DPC is not set -# CONFIG_PCIE_PTM is not set -# CONFIG_PCIE_BW is not set -# CONFIG_PCI_MSI is not set -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCI_IOV is not set -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# PCI controller drivers -# - -# -# Cadence PCIe controllers support -# -# CONFIG_PCIE_CADENCE_HOST is not set -# end of Cadence PCIe controllers support - -# CONFIG_PCI_FTPCI100 is not set -# CONFIG_PCI_HOST_GENERIC is not set -# CONFIG_PCIE_XILINX is not set -# CONFIG_PCI_V3_SEMI is not set -# CONFIG_PCIE_ALTERA is not set - -# -# DesignWare PCI Core Support -# -# end of DesignWare PCI Core Support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -# CONFIG_PCI_SW_SWITCHTEC is not set -# end of PCI switch controller drivers - -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Generic Driver Options -# -# CONFIG_UEVENT_HELPER is not set -CONFIG_DEVTMPFS=y -# CONFIG_DEVTMPFS_MOUNT is not set -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_FW_LOADER_USER_HELPER is not set -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -CONFIG_GENERIC_ARCH_TOPOLOGY=y -# end of Generic Driver Options - -# -# Bus devices -# -# CONFIG_BRCMSTB_GISB_ARB is not set -# CONFIG_SIMPLE_PM_BUS is not set -# CONFIG_VEXPRESS_CONFIG is not set -# end of Bus devices - -CONFIG_CONNECTOR=m -# CONFIG_GNSS is not set -# CONFIG_MTD is not set -CONFIG_DTC=y -CONFIG_OF=y -# CONFIG_OF_UNITTEST is not set -CONFIG_OF_FLATTREE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_KOBJ=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_MDIO=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OF_RESOLVE=y -CONFIG_OF_OVERLAY=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_NULL_BLK is not set -CONFIG_CDROM=y -# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set -CONFIG_ZRAM=y -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_DRBD is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_VIRTIO_BLK=m -# CONFIG_VIRTIO_BLK_SCSI is not set -# CONFIG_BLK_DEV_RBD is not set -# CONFIG_BLK_DEV_RSXX is not set - -# -# NVME Support -# -# CONFIG_BLK_DEV_NVME is not set -# CONFIG_NVME_FC is not set -# CONFIG_NVME_TARGET is not set -# end of NVME Support - -# -# Misc devices -# -# CONFIG_AD525X_DPOT is not set -# CONFIG_DUMMY_IRQ is not set -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_APDS9802ALS is not set -# CONFIG_ISL29003 is not set -# CONFIG_ISL29020 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_SENSORS_BH1770 is not set -# CONFIG_SENSORS_APDS990X is not set -# CONFIG_HMC6352 is not set -# CONFIG_DS1682 is not set -# CONFIG_USB_SWITCH_FSA9480 is not set -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_MISC_RTSX=y -# CONFIG_PVPANIC is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_AT25 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_MAX6875 is not set -CONFIG_EEPROM_93CX6=m -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_EEPROM_IDT_89HPESX is not set -# CONFIG_EEPROM_EE1004 is not set -# end of EEPROM support - -# CONFIG_CB710_CORE is not set - -# -# Texas Instruments shared transport line discipline -# -# CONFIG_TI_ST is not set -# end of Texas Instruments shared transport line discipline - -# CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_SENSORS_LIS3_I2C is not set -# CONFIG_ALTERA_STAPL is not set - -# -# Intel MIC & related support -# - -# -# Intel MIC Bus Driver -# - -# -# SCIF Bus Driver -# - -# -# VOP Bus Driver -# -# CONFIG_VOP_BUS is not set - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# - -# -# SCIF Driver -# - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# - -# -# VOP Driver -# -# end of Intel MIC & related support - -# CONFIG_ECHO is not set -# CONFIG_MISC_ALCOR_PCI is not set -# CONFIG_MISC_RTSX_PCI is not set -CONFIG_MISC_RTSX_USB=y -# CONFIG_HABANA_AI is not set -# end of Misc devices - -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_ISCSI_BOOT_SYSFS is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_SCSI_BNX2_ISCSI is not set -# CONFIG_BE2ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_HPSA is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_3W_SAS is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_MVUMI is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_SCSI_ESAS2R is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_MPT3SAS is not set -# CONFIG_SCSI_MPT2SAS is not set -# CONFIG_SCSI_SMARTPQI is not set -# CONFIG_SCSI_UFSHCD is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_MYRB is not set -# CONFIG_SCSI_MYRS is not set -# CONFIG_SCSI_SNIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_WD719X is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_PMCRAID is not set -# CONFIG_SCSI_PM8001 is not set -# CONFIG_SCSI_VIRTIO is not set -# CONFIG_SCSI_DH is not set -# end of SCSI device support - -# CONFIG_ATA is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -# CONFIG_MD_LINEAR is not set -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BCACHE is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_UNSTRIPED=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -# CONFIG_DM_WRITECACHE is not set -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -# CONFIG_DM_INTEGRITY is not set -# CONFIG_TARGET_CORE is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_FIREWIRE_NOSY is not set -# end of IEEE 1394 (FireWire) support - -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_NET_CORE=y -# CONFIG_BONDING is not set -# CONFIG_DUMMY is not set -# CONFIG_EQUALIZER is not set -# CONFIG_NET_FC is not set -# CONFIG_NET_TEAM is not set -# CONFIG_MACVLAN is not set -# CONFIG_IPVLAN is not set -# CONFIG_VXLAN is not set -# CONFIG_GENEVE is not set -# CONFIG_GTP is not set -# CONFIG_MACSEC is not set -# CONFIG_NETCONSOLE is not set -CONFIG_TUN=y -# CONFIG_TUN_VNET_CROSS_LE is not set -# CONFIG_VETH is not set -CONFIG_VIRTIO_NET=m -# CONFIG_NLMON is not set -# CONFIG_ARCNET is not set - -# -# CAIF transport drivers -# - -# -# Distributed Switch Architecture drivers -# -# end of Distributed Switch Architecture drivers - -# CONFIG_ETHERNET is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_BUS=y -# CONFIG_MDIO_BCM_UNIMAC is not set -# CONFIG_MDIO_BITBANG is not set -# CONFIG_MDIO_BUS_MUX_GPIO is not set -# CONFIG_MDIO_BUS_MUX_MMIOREG is not set -# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set -# CONFIG_MDIO_HISI_FEMAC is not set -# CONFIG_MDIO_MSCC_MIIM is not set -CONFIG_PHYLIB=y -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -# CONFIG_AMD_PHY is not set -# CONFIG_AQUANTIA_PHY is not set -# CONFIG_AX88796B_PHY is not set -# CONFIG_AT803X_PHY is not set -# CONFIG_BCM7XXX_PHY is not set -# CONFIG_BCM87XX_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_CORTINA_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_DP83822_PHY is not set -# CONFIG_DP83TC811_PHY is not set -# CONFIG_DP83848_PHY is not set -# CONFIG_DP83867_PHY is not set -CONFIG_FIXED_PHY=y -# CONFIG_ICPLUS_PHY is not set -# CONFIG_INTEL_XWAY_PHY is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_MARVELL_PHY is not set -# CONFIG_MARVELL_10G_PHY is not set -# CONFIG_MICREL_PHY is not set -CONFIG_MICROCHIP_PHY=y -# CONFIG_MICROCHIP_T1_PHY is not set -# CONFIG_MICROSEMI_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_RENESAS_PHY is not set -# CONFIG_ROCKCHIP_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_TERANETICS_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_XILINX_GMII2RGMII is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -CONFIG_USB_NET_DRIVERS=y -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -CONFIG_USB_RTL8150=y -CONFIG_USB_RTL8152=y -CONFIG_USB_LAN78XX=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_AX8817X=y -CONFIG_USB_NET_AX88179_178A=y -CONFIG_USB_NET_CDCETHER=y -CONFIG_USB_NET_CDC_EEM=y -# CONFIG_USB_NET_CDC_NCM is not set -# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set -# CONFIG_USB_NET_CDC_MBIM is not set -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_SR9700 is not set -# CONFIG_USB_NET_SR9800 is not set -CONFIG_USB_NET_SMSC75XX=y -CONFIG_USB_NET_SMSC95XX=y -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -CONFIG_USB_NET_CDC_SUBSET_ENABLE=y -CONFIG_USB_NET_CDC_SUBSET=y -# CONFIG_USB_ALI_M5632 is not set -# CONFIG_USB_AN2720 is not set -# CONFIG_USB_BELKIN is not set -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_EPSON2888 is not set -# CONFIG_USB_KC2190 is not set -# CONFIG_USB_NET_ZAURUS is not set -# CONFIG_USB_NET_CX82310_ETH is not set -# CONFIG_USB_NET_KALMIA is not set -# CONFIG_USB_NET_QMI_WWAN is not set -# CONFIG_USB_HSO is not set -# CONFIG_USB_NET_INT51X1 is not set -# CONFIG_USB_IPHETH is not set -# CONFIG_USB_SIERRA_NET is not set -# CONFIG_USB_VL600 is not set -# CONFIG_USB_NET_CH9200 is not set -# CONFIG_USB_NET_AQC111 is not set -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -# CONFIG_WLAN_VENDOR_ADMTEK is not set -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -# CONFIG_ATH5K is not set -# CONFIG_ATH5K_PCI is not set -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -# CONFIG_ATH9K is not set -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -# CONFIG_CARL9170 is not set -# CONFIG_ATH6KL is not set -# CONFIG_AR5523 is not set -# CONFIG_WIL6210 is not set -# CONFIG_ATH10K is not set -# CONFIG_WCN36XX is not set -# CONFIG_WLAN_VENDOR_ATMEL is not set -# CONFIG_WLAN_VENDOR_BROADCOM is not set -# CONFIG_WLAN_VENDOR_CISCO is not set -# CONFIG_WLAN_VENDOR_INTEL is not set -# CONFIG_WLAN_VENDOR_INTERSIL is not set -# CONFIG_WLAN_VENDOR_MARVELL is not set -# CONFIG_WLAN_VENDOR_MEDIATEK is not set -# CONFIG_WLAN_VENDOR_RALINK is not set -# CONFIG_WLAN_VENDOR_REALTEK is not set -# CONFIG_WLAN_VENDOR_RSI is not set -# CONFIG_WLAN_VENDOR_ST is not set -# CONFIG_WLAN_VENDOR_TI is not set -# CONFIG_WLAN_VENDOR_ZYDAS is not set -# CONFIG_WLAN_VENDOR_QUANTENNA is not set -# CONFIG_MAC80211_HWSIM is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_VIRT_WIFI is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_VMXNET3 is not set -# CONFIG_NETDEVSIM is not set -CONFIG_NET_FAILOVER=m -# CONFIG_ISDN is not set -# CONFIG_NVM is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set -# CONFIG_INPUT_SPARSEKMAP is not set -CONFIG_INPUT_MATRIXKMAP=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_APMPOWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ADC is not set -# CONFIG_KEYBOARD_ADP5588 is not set -# CONFIG_KEYBOARD_ADP5589 is not set -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_QT1050 is not set -# CONFIG_KEYBOARD_QT1070 is not set -# CONFIG_KEYBOARD_QT2160 is not set -# CONFIG_KEYBOARD_DLINK_DIR685 is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_LM8333 is not set -# CONFIG_KEYBOARD_MAX7359 is not set -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_SAMSUNG is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_OMAP4 is not set -# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set -# CONFIG_KEYBOARD_TWL4030 is not set -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_KEYBOARD_CROS_EC=y -# CONFIG_KEYBOARD_CAP11XX is not set -# CONFIG_KEYBOARD_BCM is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -CONFIG_MOUSE_ELAN_I2C=y -CONFIG_MOUSE_ELAN_I2C_I2C=y -# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -CONFIG_MOUSE_SYNAPTICS_I2C=y -# CONFIG_MOUSE_SYNAPTICS_USB is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set -# CONFIG_RMI4_CORE is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set -# CONFIG_N_GSM is not set -# CONFIG_TRACE_SINK is not set -CONFIG_NULL_TTY=m -CONFIG_LDISC_AUTOLOAD=y -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_ASPEED_VUART is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_DW=y -# CONFIG_SERIAL_8250_EM is not set -# CONFIG_SERIAL_8250_RT288X is not set -# CONFIG_SERIAL_8250_MOXA is not set -CONFIG_SERIAL_OF_PLATFORM=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_SIFIVE is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_BCM63XX is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y -CONFIG_SERIAL_ARC_NR_PORTS=1 -# CONFIG_SERIAL_RP2 is not set -# CONFIG_SERIAL_FSL_LPUART is not set -# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set -# CONFIG_SERIAL_ST_ASC is not set -# end of Serial drivers - -# CONFIG_SERIAL_DEV_BUS is not set -# CONFIG_TTY_PRINTK is not set -# CONFIG_HVC_DCC is not set -# CONFIG_VIRTIO_CONSOLE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_TCG_TPM=y -# CONFIG_TCG_TIS is not set -# CONFIG_TCG_TIS_SPI is not set -# CONFIG_TCG_TIS_I2C_ATMEL is not set -CONFIG_TCG_TIS_I2C_INFINEON=y -# CONFIG_TCG_TIS_I2C_NUVOTON is not set -# CONFIG_TCG_ATMEL is not set -# CONFIG_TCG_VTPM_PROXY is not set -# CONFIG_TCG_TIS_ST33ZP24_I2C is not set -# CONFIG_TCG_TIS_ST33ZP24_SPI is not set -CONFIG_DEVPORT=y -# CONFIG_XILLYBUS is not set -# end of Character devices - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=y - -# -# Multiplexer I2C Chip support -# -# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_GPMUX is not set -# CONFIG_I2C_MUX_LTC4306 is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_MUX_REG is not set -# CONFIG_I2C_DEMUX_PINCTRL is not set -# CONFIG_I2C_MUX_MLXCPLD is not set -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_ALGOBIT=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_NVIDIA_GPU is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_CBUS_GPIO is not set -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_EMEV2 is not set -CONFIG_I2C_GPIO=y -# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set -# CONFIG_I2C_NOMADIK is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_RK3X=y -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_XILINX is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_DIOLAN_U2C is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_ROBOTFUZZ_OSIF is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_CROS_EC_TUNNEL=y -# end of I2C Hardware Bus support - -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_SLAVE is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -# CONFIG_I3C is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -# CONFIG_SPI_MEM is not set - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_ALTERA is not set -# CONFIG_SPI_AXI_SPI_ENGINE is not set -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_DESIGNWARE is not set -# CONFIG_SPI_NXP_FLEXSPI is not set -CONFIG_SPI_GPIO=y -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_OC_TINY is not set -# CONFIG_SPI_PL022 is not set -# CONFIG_SPI_PXA2XX is not set -CONFIG_SPI_ROCKCHIP=y -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_SIFIVE is not set -# CONFIG_SPI_MXIC is not set -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_ZYNQMP_GQSPI is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_LOOPBACK_TEST is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPI_SLAVE is not set -# CONFIG_SPMI is not set -# CONFIG_HSI is not set -CONFIG_PPS=y -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -# CONFIG_PPS_CLIENT_LDISC is not set -# CONFIG_PPS_CLIENT_GPIO is not set - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=y - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_PINMUX=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AS3722=y -# CONFIG_PINCTRL_AXP209 is not set -# CONFIG_PINCTRL_AMD is not set -# CONFIG_PINCTRL_MCP23S08 is not set -CONFIG_PINCTRL_ROCKCHIP=y -CONFIG_PINCTRL_SINGLE=y -# CONFIG_PINCTRL_SX150X is not set -# CONFIG_PINCTRL_STMFX is not set -CONFIG_PINCTRL_PALMAS=y -# CONFIG_PINCTRL_RK805 is not set -# CONFIG_PINCTRL_OCELOT is not set -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_OF_GPIO=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=y - -# -# Memory mapped GPIO drivers -# -# CONFIG_GPIO_74XX_MMIO is not set -# CONFIG_GPIO_ALTERA is not set -# CONFIG_GPIO_CADENCE is not set -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EXAR is not set -# CONFIG_GPIO_FTGPIO010 is not set -CONFIG_GPIO_GENERIC_PLATFORM=y -# CONFIG_GPIO_GRGPIO is not set -# CONFIG_GPIO_HLWD is not set -# CONFIG_GPIO_MB86S7X is not set -# CONFIG_GPIO_MPC8XXX is not set -CONFIG_GPIO_PL061=y -# CONFIG_GPIO_SAMA5D2_PIOBU is not set -# CONFIG_GPIO_SYSCON is not set -# CONFIG_GPIO_XILINX is not set -# CONFIG_GPIO_ZEVIO is not set -# CONFIG_GPIO_AMD_FCH is not set -# end of Memory mapped GPIO drivers - -# -# I2C GPIO expanders -# -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ADNP is not set -# CONFIG_GPIO_GW_PLD is not set -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_TPIC2810 is not set -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -# CONFIG_GPIO_DA9052 is not set -# CONFIG_HTC_EGPIO is not set -CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_TWL4030=y -CONFIG_GPIO_TWL6040=y -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -# CONFIG_GPIO_BT8XX is not set -# CONFIG_GPIO_PCI_IDIO_16 is not set -# CONFIG_GPIO_PCIE_IDIO_24 is not set -# CONFIG_GPIO_RDC321X is not set -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -# CONFIG_GPIO_74X164 is not set -# CONFIG_GPIO_MAX3191X is not set -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_PISOSR is not set -# CONFIG_GPIO_XRA1403 is not set -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -# CONFIG_W1 is not set -CONFIG_POWER_AVS=y -CONFIG_ROCKCHIP_IODOMAIN=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_AS3722=y -# CONFIG_POWER_RESET_BRCMKONA is not set -# CONFIG_POWER_RESET_BRCMSTB is not set -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y -# CONFIG_POWER_RESET_LTC2952 is not set -CONFIG_POWER_RESET_RESTART=y -# CONFIG_POWER_RESET_VERSATILE is not set -CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_RESET_SYSCON_POWEROFF=y -CONFIG_REBOOT_MODE=y -CONFIG_SYSCON_REBOOT_MODE=y -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_APM_POWER is not set -# CONFIG_GENERIC_ADC_BATTERY is not set -# CONFIG_TEST_POWER is not set -# CONFIG_CHARGER_ADP5061 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2781 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_LEGO_EV3 is not set -CONFIG_BATTERY_SBS=y -# CONFIG_CHARGER_SBS is not set -# CONFIG_MANAGER_SBS is not set -# CONFIG_BATTERY_BQ27XXX is not set -# CONFIG_BATTERY_DA9052 is not set -# CONFIG_AXP20X_POWER is not set -# CONFIG_AXP288_FUEL_GAUGE is not set -# CONFIG_BATTERY_MAX17040 is not set -# CONFIG_BATTERY_MAX17042 is not set -# CONFIG_CHARGER_ISP1704 is not set -# CONFIG_CHARGER_MAX8903 is not set -# CONFIG_CHARGER_TWL4030 is not set -# CONFIG_CHARGER_LP8727 is not set -CONFIG_CHARGER_GPIO=y -# CONFIG_CHARGER_MANAGER is not set -# CONFIG_CHARGER_LT3651 is not set -# CONFIG_CHARGER_DETECTOR_MAX14656 is not set -# CONFIG_CHARGER_BQ2415X is not set -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_BQ24257 is not set -# CONFIG_CHARGER_BQ24735 is not set -# CONFIG_CHARGER_BQ25890 is not set -# CONFIG_CHARGER_SMB347 is not set -# CONFIG_BATTERY_GAUGE_LTC2941 is not set -# CONFIG_CHARGER_RT9455 is not set -# CONFIG_CHARGER_CROS_USBPD is not set -# CONFIG_CHARGER_UCS1002 is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_OF=y -# CONFIG_THERMAL_WRITABLE_TRIPS is not set -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -# CONFIG_THERMAL_GOV_BANG_BANG is not set -# CONFIG_THERMAL_GOV_USER_SPACE is not set -# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -CONFIG_CPU_THERMAL=y -# CONFIG_CLOCK_THERMAL is not set -# CONFIG_DEVFREQ_THERMAL is not set -# CONFIG_THERMAL_EMULATION is not set -# CONFIG_THERMAL_MMIO is not set -# CONFIG_QORIQ_THERMAL is not set -CONFIG_ROCKCHIP_THERMAL=y -# CONFIG_GENERIC_ADC_THERMAL is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -# CONFIG_WATCHDOG_SYSFS is not set - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_DA9052_WATCHDOG is not set -# CONFIG_GPIO_WATCHDOG is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_ZIIRAVE_WATCHDOG is not set -# CONFIG_ARM_SP805_WATCHDOG is not set -# CONFIG_CADENCE_WATCHDOG is not set -# CONFIG_FTWDT010_WATCHDOG is not set -CONFIG_DW_WATCHDOG=y -# CONFIG_TWL4030_WATCHDOG is not set -# CONFIG_MAX63XX_WATCHDOG is not set -# CONFIG_IMX_SC_WDT is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_I6300ESB_WDT is not set -# CONFIG_MEN_A21_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set -CONFIG_BCMA_POSSIBLE=y -# CONFIG_BCMA is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -# CONFIG_MFD_ACT8945A is not set -# CONFIG_MFD_AS3711 is not set -CONFIG_MFD_AS3722=y -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_ATMEL_FLEXCOM is not set -# CONFIG_MFD_ATMEL_HLCDC is not set -# CONFIG_MFD_BCM590XX is not set -# CONFIG_MFD_BD9571MWV is not set -CONFIG_MFD_AXP20X=y -CONFIG_MFD_AXP20X_I2C=y -CONFIG_MFD_CROS_EC=y -CONFIG_MFD_CROS_EC_CHARDEV=y -# CONFIG_MFD_MADERA is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_PMIC_DA903X is not set -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9052_I2C=y -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9062 is not set -# CONFIG_MFD_DA9063 is not set -# CONFIG_MFD_DA9150 is not set -# CONFIG_MFD_DLN2 is not set -# CONFIG_MFD_MC13XXX_SPI is not set -# CONFIG_MFD_MC13XXX_I2C is not set -# CONFIG_MFD_HI6421_PMIC is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_LPC_ICH is not set -# CONFIG_LPC_SCH is not set -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set -# CONFIG_MFD_MAX77620 is not set -# CONFIG_MFD_MAX77650 is not set -CONFIG_MFD_MAX77686=y -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX77843 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_MFD_MT6397 is not set -# CONFIG_MFD_MENF21BMC is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_MFD_CPCAP is not set -# CONFIG_MFD_VIPERBOARD is not set -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_MFD_PM8XXX is not set -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RT5033 is not set -# CONFIG_MFD_RC5T583 is not set -CONFIG_MFD_RK808=y -# CONFIG_MFD_RN5T618 is not set -CONFIG_MFD_SEC_CORE=y -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SKY81452 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_ABX500_CORE is not set -# CONFIG_MFD_STMPE is not set -CONFIG_MFD_SYSCON=y -# CONFIG_MFD_TI_AM335X_TSCADC is not set -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_TI_LMU is not set -CONFIG_MFD_PALMAS=y -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65086 is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TI_LP873X is not set -# CONFIG_MFD_TI_LP87565 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_MFD_TWL4030_AUDIO=y -CONFIG_TWL6040_CORE=y -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_MFD_TQMX86 is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_LOCHNAGAR is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set -# CONFIG_MFD_ROHM_BD718XX is not set -# CONFIG_MFD_STPMIC1 is not set -# CONFIG_MFD_STMFX is not set -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_88PG86X is not set -CONFIG_REGULATOR_ACT8865=y -# CONFIG_REGULATOR_AD5398 is not set -# CONFIG_REGULATOR_ANATOP is not set -CONFIG_REGULATOR_AS3722=y -# CONFIG_REGULATOR_AXP20X is not set -# CONFIG_REGULATOR_DA9052 is not set -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_DA9211 is not set -CONFIG_REGULATOR_FAN53555=y -# CONFIG_REGULATOR_GPIO is not set -# CONFIG_REGULATOR_ISL9305 is not set -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_LTC3676 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -# CONFIG_REGULATOR_MAX77686 is not set -# CONFIG_REGULATOR_MAX77802 is not set -# CONFIG_REGULATOR_MCP16502 is not set -# CONFIG_REGULATOR_MT6311 is not set -CONFIG_REGULATOR_PALMAS=y -# CONFIG_REGULATOR_PFUZE100 is not set -# CONFIG_REGULATOR_PV88060 is not set -# CONFIG_REGULATOR_PV88080 is not set -# CONFIG_REGULATOR_PV88090 is not set -CONFIG_REGULATOR_PWM=y -CONFIG_REGULATOR_RK808=y -# CONFIG_REGULATOR_S2MPA01 is not set -# CONFIG_REGULATOR_S2MPS11 is not set -# CONFIG_REGULATOR_S5M8767 is not set -# CONFIG_REGULATOR_SY8106A is not set -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS65132 is not set -# CONFIG_REGULATOR_TPS6524X is not set -CONFIG_REGULATOR_TWL4030=y -# CONFIG_REGULATOR_VCTRL is not set -# CONFIG_RC_CORE is not set -# CONFIG_MEDIA_SUPPORT is not set - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -# CONFIG_IMX_IPUV3_CORE is not set -CONFIG_DRM=y -CONFIG_DRM_MIPI_DSI=y -# CONFIG_DRM_DP_AUX_CHARDEV is not set -# CONFIG_DRM_DEBUG_MM is not set -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=y -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_SCHED=y - -# -# I2C encoder or helper chips -# -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set -# CONFIG_DRM_I2C_NXP_TDA998X is not set -# CONFIG_DRM_I2C_NXP_TDA9950 is not set -# end of I2C encoder or helper chips - -# -# ARM devices -# -# CONFIG_DRM_HDLCD is not set -# CONFIG_DRM_MALI_DISPLAY is not set -# CONFIG_DRM_KOMEDA is not set -# end of ARM devices - -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_AMDGPU is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# end of ACP (Audio CoProcessor) Configuration - -# CONFIG_DRM_NOUVEAU is not set -# CONFIG_DRM_VGEM is not set -# CONFIG_DRM_VKMS is not set -# CONFIG_DRM_EXYNOS is not set -CONFIG_DRM_ROCKCHIP=y -CONFIG_ROCKCHIP_ANALOGIX_DP=y -# CONFIG_ROCKCHIP_CDN_DP is not set -CONFIG_ROCKCHIP_DW_HDMI=y -CONFIG_ROCKCHIP_DW_MIPI_DSI=y -# CONFIG_ROCKCHIP_INNO_HDMI is not set -# CONFIG_ROCKCHIP_LVDS is not set -# CONFIG_ROCKCHIP_RGB is not set -CONFIG_ROCKCHIP_RK3066_HDMI=y -# CONFIG_DRM_UDL is not set -# CONFIG_DRM_AST is not set -# CONFIG_DRM_MGAG200 is not set -# CONFIG_DRM_CIRRUS_QEMU is not set -# CONFIG_DRM_ARMADA is not set -# CONFIG_DRM_RCAR_DW_HDMI is not set -# CONFIG_DRM_RCAR_LVDS is not set -# CONFIG_DRM_OMAP is not set -# CONFIG_DRM_TILCDC is not set -# CONFIG_DRM_QXL is not set -# CONFIG_DRM_BOCHS is not set -# CONFIG_DRM_VIRTIO_GPU is not set -# CONFIG_DRM_FSL_DCU is not set -# CONFIG_DRM_STM is not set -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -# CONFIG_DRM_PANEL_ARM_VERSATILE is not set -# CONFIG_DRM_PANEL_LVDS is not set -CONFIG_DRM_PANEL_SIMPLE=y -# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set -# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set -# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set -# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set -# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set -# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set -# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set -# CONFIG_DRM_PANEL_LG_LG4573 is not set -# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set -# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set -# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set -# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set -# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set -# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set -# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set -# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set -# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set -# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set -# CONFIG_DRM_PANEL_TPO_TPG110 is not set -# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -# CONFIG_DRM_ANALOGIX_ANX78XX is not set -# CONFIG_DRM_CDNS_DSI is not set -# CONFIG_DRM_DUMB_VGA_DAC is not set -# CONFIG_DRM_LVDS_ENCODER is not set -# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set -# CONFIG_DRM_NXP_PTN3460 is not set -# CONFIG_DRM_PARADE_PS8622 is not set -# CONFIG_DRM_SIL_SII8620 is not set -# CONFIG_DRM_SII902X is not set -# CONFIG_DRM_SII9234 is not set -# CONFIG_DRM_THINE_THC63LVD1024 is not set -# CONFIG_DRM_TOSHIBA_TC358764 is not set -# CONFIG_DRM_TOSHIBA_TC358767 is not set -# CONFIG_DRM_TI_TFP410 is not set -# CONFIG_DRM_TI_SN65DSI86 is not set -CONFIG_DRM_ANALOGIX_DP=y -# CONFIG_DRM_I2C_ADV7511 is not set -CONFIG_DRM_DW_HDMI=y -# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set -CONFIG_DRM_DW_HDMI_I2S_AUDIO=y -# CONFIG_DRM_DW_HDMI_CEC is not set -CONFIG_DRM_DW_MIPI_DSI=y -# end of Display Interface Bridges - -# CONFIG_DRM_STI is not set -# CONFIG_DRM_ETNAVIV is not set -# CONFIG_DRM_ARCPGU is not set -# CONFIG_DRM_HISI_HIBMC is not set -# CONFIG_DRM_MXSFB is not set -# CONFIG_DRM_TINYDRM is not set -# CONFIG_DRM_PL111 is not set -# CONFIG_DRM_TVE200 is not set -# CONFIG_DRM_LIMA is not set -CONFIG_DRM_PANFROST=y -# CONFIG_DRM_LEGACY is not set -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_ARMCLCD is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_UVESA is not set -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I740 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_SMSCUFX is not set -# CONFIG_FB_UDL is not set -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -CONFIG_FB_SIMPLE=y -# CONFIG_FB_SSD1307 is not set -# CONFIG_FB_SM712 is not set -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_BACKLIGHT_PWM=y -# CONFIG_BACKLIGHT_DA9052 is not set -# CONFIG_BACKLIGHT_PM8941_WLED is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -# CONFIG_BACKLIGHT_LP855X is not set -# CONFIG_BACKLIGHT_PANDORA is not set -# CONFIG_BACKLIGHT_GPIO is not set -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_BACKLIGHT_ARCXCNN is not set -# end of Backlight & LCD device support - -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -# CONFIG_LOGO is not set -# end of Graphics support - -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=y -CONFIG_SND_SEQ_DEVICE=y -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -# CONFIG_SND_OSSEMUL is not set -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=y -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_PROC_FS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_SEQUENCER=y -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -# CONFIG_SND_DRIVERS is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CTXFI is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_INDIGOIOX is not set -# CONFIG_SND_INDIGODJX is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_LOLA is not set -# CONFIG_SND_LX6464ES is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SE6X is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# HD-Audio -# -# CONFIG_SND_HDA_INTEL is not set -# end of HD-Audio - -CONFIG_SND_HDA_PREALLOC_SIZE=64 -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -# CONFIG_SND_USB is not set -CONFIG_SND_SOC=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -# CONFIG_SND_SOC_AMD_ACP is not set -# CONFIG_SND_ATMEL_SOC is not set -CONFIG_SND_DESIGNWARE_I2S=y -# CONFIG_SND_DESIGNWARE_PCM is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -# CONFIG_SND_SOC_FSL_ASRC is not set -# CONFIG_SND_SOC_FSL_SAI is not set -# CONFIG_SND_SOC_FSL_AUDMIX is not set -# CONFIG_SND_SOC_FSL_SSI is not set -# CONFIG_SND_SOC_FSL_SPDIF is not set -# CONFIG_SND_SOC_FSL_ESAI is not set -# CONFIG_SND_SOC_FSL_MICFIL is not set -# CONFIG_SND_SOC_IMX_AUDMUX is not set -# end of SoC Audio for Freescale CPUs - -# CONFIG_SND_I2S_HI6210_I2S is not set -# CONFIG_SND_SOC_IMG is not set -# CONFIG_SND_SOC_MTK_BTCVSD is not set -CONFIG_SND_SOC_ROCKCHIP=y -CONFIG_SND_SOC_ROCKCHIP_I2S=y -CONFIG_SND_SOC_ROCKCHIP_PDM=y -CONFIG_SND_SOC_ROCKCHIP_SPDIF=y -CONFIG_SND_SOC_ROCKCHIP_MAX98090=y -CONFIG_SND_SOC_ROCKCHIP_RT5645=y -CONFIG_SND_SOC_RK3288_HDMI_ANALOG=y -# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set -# CONFIG_SND_SOC_SOF_TOPLEVEL is not set - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -# CONFIG_SND_SOC_XILINX_I2S is not set -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -# CONFIG_SND_SOC_XTFPGA_I2S is not set -# CONFIG_ZX_TDM is not set -CONFIG_SND_SOC_I2C_AND_SPI=y - -# -# CODEC drivers -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_ADAU1761_I2C is not set -# CONFIG_SND_SOC_ADAU1761_SPI is not set -# CONFIG_SND_SOC_ADAU7002 is not set -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4118 is not set -# CONFIG_SND_SOC_AK4458 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4613 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_AK5558 is not set -# CONFIG_SND_SOC_ALC5623 is not set -# CONFIG_SND_SOC_BD28623 is not set -# CONFIG_SND_SOC_BT_SCO is not set -CONFIG_SND_SOC_CROS_EC_CODEC=m -# CONFIG_SND_SOC_CS35L32 is not set -# CONFIG_SND_SOC_CS35L33 is not set -# CONFIG_SND_SOC_CS35L34 is not set -# CONFIG_SND_SOC_CS35L35 is not set -# CONFIG_SND_SOC_CS35L36 is not set -# CONFIG_SND_SOC_CS42L42 is not set -# CONFIG_SND_SOC_CS42L51_I2C is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4265 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271_I2C is not set -# CONFIG_SND_SOC_CS4271_SPI is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_CS43130 is not set -# CONFIG_SND_SOC_CS4341 is not set -# CONFIG_SND_SOC_CS4349 is not set -# CONFIG_SND_SOC_CS53L30 is not set -# CONFIG_SND_SOC_DMIC is not set -CONFIG_SND_SOC_HDMI_CODEC=y -# CONFIG_SND_SOC_ES7134 is not set -# CONFIG_SND_SOC_ES7241 is not set -# CONFIG_SND_SOC_ES8316 is not set -CONFIG_SND_SOC_ES8328=y -CONFIG_SND_SOC_ES8328_I2C=y -CONFIG_SND_SOC_ES8328_SPI=y -# CONFIG_SND_SOC_GTM601 is not set -# CONFIG_SND_SOC_INNO_RK3036 is not set -# CONFIG_SND_SOC_MAX98088 is not set -CONFIG_SND_SOC_MAX98090=y -# CONFIG_SND_SOC_MAX98504 is not set -# CONFIG_SND_SOC_MAX9867 is not set -# CONFIG_SND_SOC_MAX98927 is not set -# CONFIG_SND_SOC_MAX98373 is not set -# CONFIG_SND_SOC_MAX9860 is not set -# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1789_I2C is not set -# CONFIG_SND_SOC_PCM179X_I2C is not set -# CONFIG_SND_SOC_PCM179X_SPI is not set -# CONFIG_SND_SOC_PCM186X_I2C is not set -# CONFIG_SND_SOC_PCM186X_SPI is not set -# CONFIG_SND_SOC_PCM3060_I2C is not set -# CONFIG_SND_SOC_PCM3060_SPI is not set -# CONFIG_SND_SOC_PCM3168A_I2C is not set -# CONFIG_SND_SOC_PCM3168A_SPI is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -CONFIG_SND_SOC_RK3328=m -CONFIG_SND_SOC_RL6231=y -# CONFIG_SND_SOC_RT5616 is not set -# CONFIG_SND_SOC_RT5631 is not set -CONFIG_SND_SOC_RT5645=y -# CONFIG_SND_SOC_SGTL5000 is not set -# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_SSM2305 is not set -# CONFIG_SND_SOC_SSM2602_SPI is not set -# CONFIG_SND_SOC_SSM2602_I2C is not set -# CONFIG_SND_SOC_SSM4567 is not set -# CONFIG_SND_SOC_STA32X is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_STI_SAS is not set -# CONFIG_SND_SOC_TAS2552 is not set -# CONFIG_SND_SOC_TAS5086 is not set -# CONFIG_SND_SOC_TAS571X is not set -# CONFIG_SND_SOC_TAS5720 is not set -# CONFIG_SND_SOC_TAS6424 is not set -# CONFIG_SND_SOC_TDA7419 is not set -# CONFIG_SND_SOC_TFA9879 is not set -# CONFIG_SND_SOC_TLV320AIC23_I2C is not set -# CONFIG_SND_SOC_TLV320AIC23_SPI is not set -# CONFIG_SND_SOC_TLV320AIC31XX is not set -# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set -# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set -# CONFIG_SND_SOC_TLV320AIC3X is not set -CONFIG_SND_SOC_TS3A227E=y -# CONFIG_SND_SOC_TSCS42XX is not set -# CONFIG_SND_SOC_TSCS454 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8524 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8782 is not set -# CONFIG_SND_SOC_WM8804_I2C is not set -# CONFIG_SND_SOC_WM8804_SPI is not set -# CONFIG_SND_SOC_WM8903 is not set -# CONFIG_SND_SOC_WM8904 is not set -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8962 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8978 is not set -# CONFIG_SND_SOC_WM8985 is not set -# CONFIG_SND_SOC_ZX_AUD96P22 is not set -# CONFIG_SND_SOC_MAX9759 is not set -# CONFIG_SND_SOC_MT6351 is not set -# CONFIG_SND_SOC_MT6358 is not set -# CONFIG_SND_SOC_NAU8540 is not set -# CONFIG_SND_SOC_NAU8810 is not set -# CONFIG_SND_SOC_NAU8822 is not set -# CONFIG_SND_SOC_NAU8824 is not set -# CONFIG_SND_SOC_TPA6130A2 is not set -# end of CODEC drivers - -# CONFIG_SND_SIMPLE_CARD is not set -# CONFIG_SND_AUDIO_GRAPH_CARD is not set - -# -# HID support -# -CONFIG_HID=y -# CONFIG_HID_BATTERY_STRENGTH is not set -CONFIG_HIDRAW=y -CONFIG_UHID=y -CONFIG_HID_GENERIC=y - -# -# Special HID drivers -# -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_ACCUTOUCH is not set -# CONFIG_HID_ACRUX is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_APPLEIR is not set -# CONFIG_HID_ASUS is not set -# CONFIG_HID_AUREAL is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_BETOP_FF is not set -# CONFIG_HID_BIGBEN_FF is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -CONFIG_HID_CORSAIR=y -# CONFIG_HID_COUGAR is not set -# CONFIG_HID_MACALLY is not set -# CONFIG_HID_PRODIKEYS is not set -# CONFIG_HID_CMEDIA is not set -# CONFIG_HID_CP2112 is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_EMS_FF is not set -CONFIG_HID_ELAN=y -# CONFIG_HID_ELECOM is not set -# CONFIG_HID_ELO is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_GEMBIRD is not set -# CONFIG_HID_GFRM is not set -# CONFIG_HID_HOLTEK is not set -# CONFIG_HID_GOOGLE_HAMMER is not set -# CONFIG_HID_GT683R is not set -# CONFIG_HID_KEYTOUCH is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_UCLOGIC is not set -# CONFIG_HID_WALTOP is not set -# CONFIG_HID_VIEWSONIC is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_ICADE is not set -# CONFIG_HID_ITE is not set -# CONFIG_HID_JABRA is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LCPOWER is not set -# CONFIG_HID_LED is not set -# CONFIG_HID_LENOVO is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MAGICMOUSE is not set -# CONFIG_HID_MALTRON is not set -# CONFIG_HID_MAYFLASH is not set -# CONFIG_HID_REDRAGON is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_MULTITOUCH is not set -# CONFIG_HID_NTI is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_ORTEK is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PENMOUNT is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_PICOLCD is not set -# CONFIG_HID_PLANTRONICS is not set -# CONFIG_HID_PRIMAX is not set -# CONFIG_HID_RETRODE is not set -# CONFIG_HID_ROCCAT is not set -# CONFIG_HID_SAITEK is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_SPEEDLINK is not set -# CONFIG_HID_STEAM is not set -# CONFIG_HID_STEELSERIES is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_RMI is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_TIVO is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_THINGM is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_UDRAW_PS3 is not set -# CONFIG_HID_WACOM is not set -# CONFIG_HID_WIIMOTE is not set -# CONFIG_HID_XINMO is not set -# CONFIG_HID_ZEROPLUS is not set -# CONFIG_HID_ZYDACRON is not set -# CONFIG_HID_SENSOR_HUB is not set -# CONFIG_HID_ALPS is not set -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=y -CONFIG_HID_PID=y -# CONFIG_USB_HIDDEV is not set -# end of USB HID support - -# -# I2C HID support -# -CONFIG_I2C_HID=y -# end of I2C HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_OTG=y -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_OTG_FSM is not set -# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=y -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_XHCI_HCD=y -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=y -CONFIG_USB_XHCI_PLATFORM=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=y -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PLATFORM=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_MAX3421_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=y -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_STORAGE_ALAUDA=y -CONFIG_USB_STORAGE_ONETOUCH=y -CONFIG_USB_STORAGE_KARMA=y -CONFIG_USB_STORAGE_CYPRESS_ATACB=y -CONFIG_USB_STORAGE_ENE_UB6250=y -CONFIG_USB_UAS=y - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USBIP_CORE is not set -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_DWC3 is not set -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -# CONFIG_USB_DWC2_PCI is not set -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -# CONFIG_USB_CHIPIDEA is not set -# CONFIG_USB_ISP1760 is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_EHSET_TEST_FIXTURE is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_YUREX is not set -# CONFIG_USB_EZUSB_FX2 is not set -# CONFIG_USB_HUB_USB251XB is not set -# CONFIG_USB_HSIC_USB3503 is not set -# CONFIG_USB_HSIC_USB4604 is not set -# CONFIG_USB_LINK_LAYER_TEST is not set - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=y -# CONFIG_AM335X_PHY_USB is not set -CONFIG_USB_GPIO_VBUS=y -# CONFIG_USB_ISP1301 is not set -# CONFIG_USB_ULPI is not set -# end of USB Physical Layer drivers - -# CONFIG_USB_GADGET is not set -# CONFIG_TYPEC is not set -# CONFIG_USB_ROLE_SWITCH is not set -# CONFIG_USB_LED_TRIG is not set -# CONFIG_USB_ULPI_BUS is not set -# CONFIG_UWB is not set -CONFIG_MMC=y -CONFIG_PWRSEQ_EMMC=y -CONFIG_PWRSEQ_SIMPLE=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=16 -# CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_ARMMMCI is not set -CONFIG_MMC_SDHCI=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_SDHCI_OF_ARASAN is not set -# CONFIG_MMC_SDHCI_OF_AT91 is not set -# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set -CONFIG_MMC_SDHCI_CADENCE=y -# CONFIG_MMC_SDHCI_F_SDH30 is not set -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MMC_SPI=y -# CONFIG_MMC_CB710 is not set -# CONFIG_MMC_VIA_SDMMC is not set -CONFIG_MMC_DW=y -CONFIG_MMC_DW_PLTFM=y -# CONFIG_MMC_DW_BLUEFIELD is not set -# CONFIG_MMC_DW_EXYNOS is not set -# CONFIG_MMC_DW_HI3798CV200 is not set -# CONFIG_MMC_DW_K3 is not set -# CONFIG_MMC_DW_PCI is not set -CONFIG_MMC_DW_ROCKCHIP=y -# CONFIG_MMC_VUB300 is not set -CONFIG_MMC_USHC=y -# CONFIG_MMC_USDHI6ROL0 is not set -CONFIG_MMC_REALTEK_USB=y -# CONFIG_MMC_CQHCI is not set -# CONFIG_MMC_TOSHIBA_PCI is not set -# CONFIG_MMC_MTK is not set -# CONFIG_MMC_SDHCI_XENON is not set -# CONFIG_MMC_SDHCI_OMAP is not set -# CONFIG_MMC_SDHCI_AM654 is not set -# CONFIG_MEMSTICK is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_CLASS_FLASH is not set -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -# CONFIG_LEDS_AN30259A is not set -# CONFIG_LEDS_BCM6328 is not set -# CONFIG_LEDS_BCM6358 is not set -# CONFIG_LEDS_CR0014114 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3532 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_LM3692X is not set -# CONFIG_LEDS_PCA9532 is not set -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEDS_LP3944 is not set -# CONFIG_LEDS_LP3952 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set -# CONFIG_LEDS_PCA955X is not set -# CONFIG_LEDS_PCA963X is not set -# CONFIG_LEDS_DA9052 is not set -# CONFIG_LEDS_DAC124S085 is not set -# CONFIG_LEDS_PWM is not set -# CONFIG_LEDS_REGULATOR is not set -# CONFIG_LEDS_BD2802 is not set -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_TCA6507 is not set -# CONFIG_LEDS_TLC591XX is not set -# CONFIG_LEDS_LM355x is not set -# CONFIG_LEDS_IS31FL319X is not set -# CONFIG_LEDS_IS31FL32XX is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set -# CONFIG_LEDS_SYSCON is not set -# CONFIG_LEDS_MLXREG is not set -# CONFIG_LEDS_USER is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_TIMER is not set -# CONFIG_LEDS_TRIGGER_ONESHOT is not set -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -CONFIG_LEDS_TRIGGER_CPU=y -# CONFIG_LEDS_TRIGGER_ACTIVITY is not set -# CONFIG_LEDS_TRIGGER_GPIO is not set -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set - -# -# iptables trigger is under Netfilter config (LED target) -# -# CONFIG_LEDS_TRIGGER_TRANSIENT is not set -# CONFIG_LEDS_TRIGGER_CAMERA is not set -# CONFIG_LEDS_TRIGGER_PANIC is not set -# CONFIG_LEDS_TRIGGER_NETDEV is not set -# CONFIG_LEDS_TRIGGER_PATTERN is not set -# CONFIG_LEDS_TRIGGER_AUDIO is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_ABB5ZES3 is not set -# CONFIG_RTC_DRV_ABEOZ9 is not set -# CONFIG_RTC_DRV_ABX80X is not set -# CONFIG_RTC_DRV_AS3722 is not set -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -CONFIG_RTC_DRV_HYM8563=y -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_MAX77686 is not set -CONFIG_RTC_DRV_RK808=y -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12026 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8523 is not set -# CONFIG_RTC_DRV_PCF85063 is not set -# CONFIG_RTC_DRV_PCF85363 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_TWL4030 is not set -# CONFIG_RTC_DRV_PALMAS is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8010 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3028 is not set -# CONFIG_RTC_DRV_RV8803 is not set -# CONFIG_RTC_DRV_S5M is not set -# CONFIG_RTC_DRV_SD3078 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1302 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6916 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_RX6110 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_MCP795 is not set -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1685_FAMILY is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DS2404 is not set -# CONFIG_RTC_DRV_DA9052 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_ZYNQMP is not set -CONFIG_RTC_DRV_CROS_EC=y - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PL030 is not set -# CONFIG_RTC_DRV_PL031 is not set -# CONFIG_RTC_DRV_CADENCE is not set -# CONFIG_RTC_DRV_FTRTC010 is not set -# CONFIG_RTC_DRV_SNVS is not set -# CONFIG_RTC_DRV_R7301 is not set - -# -# HID Sensor RTC drivers -# -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DMA_OF=y -# CONFIG_ALTERA_MSGDMA is not set -CONFIG_AMBA_PL08X=y -# CONFIG_DW_AXI_DMAC is not set -# CONFIG_FSL_EDMA is not set -# CONFIG_FSL_QDMA is not set -# CONFIG_INTEL_IDMA64 is not set -# CONFIG_NBPFAXI_DMA is not set -CONFIG_PL330_DMA=y -# CONFIG_QCOM_HIDMA_MGMT is not set -# CONFIG_QCOM_HIDMA is not set -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set - -# -# DMA Clients -# -# CONFIG_ASYNC_TX_DMA is not set -# CONFIG_DMATEST is not set - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# end of DMABUF options - -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -# CONFIG_VFIO is not set -# CONFIG_VIRT_DRIVERS is not set -CONFIG_VIRTIO=y -# CONFIG_VIRTIO_MENU is not set - -# -# Microsoft Hyper-V guest support -# -# end of Microsoft Hyper-V guest support - -# CONFIG_STAGING is not set -# CONFIG_GOLDFISH is not set -CONFIG_CHROME_PLATFORMS=y -CONFIG_CROS_EC_I2C=y -CONFIG_CROS_EC_SPI=y -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_EC_LIGHTBAR=y -CONFIG_CROS_EC_VBC=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SYSFS=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -# CONFIG_CLK_HSDK is not set -# CONFIG_COMMON_CLK_MAX77686 is not set -# CONFIG_COMMON_CLK_MAX9485 is not set -CONFIG_COMMON_CLK_RK808=y -# CONFIG_COMMON_CLK_SCPI is not set -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI514 is not set -# CONFIG_COMMON_CLK_SI544 is not set -# CONFIG_COMMON_CLK_SI570 is not set -# CONFIG_COMMON_CLK_CDCE706 is not set -# CONFIG_COMMON_CLK_CDCE925 is not set -# CONFIG_COMMON_CLK_CS2000_CP is not set -# CONFIG_COMMON_CLK_S2MPS11 is not set -# CONFIG_CLK_TWL6040 is not set -# CONFIG_CLK_QORIQ is not set -# CONFIG_COMMON_CLK_PALMAS is not set -# CONFIG_COMMON_CLK_PWM is not set -# CONFIG_COMMON_CLK_VC5 is not set -# CONFIG_COMMON_CLK_FIXED_MMIO is not set -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_CLKSRC_MMIO=y -CONFIG_DW_APB_TIMER=y -CONFIG_DW_APB_TIMER_OF=y -CONFIG_ROCKCHIP_TIMER=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -# end of Clock Source drivers - -CONFIG_MAILBOX=y -# CONFIG_ARM_MHU is not set -# CONFIG_PLATFORM_MHU is not set -CONFIG_PL320_MBOX=y -CONFIG_ROCKCHIP_MBOX=y -# CONFIG_ALTERA_MBOX is not set -# CONFIG_MAILBOX_TEST is not set -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -CONFIG_IOMMU_IO_PGTABLE=y -CONFIG_IOMMU_IO_PGTABLE_LPAE=y -# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_OF_IOMMU=y -CONFIG_ROCKCHIP_IOMMU=y -# CONFIG_ARM_SMMU is not set - -# -# Remoteproc drivers -# -CONFIG_REMOTEPROC=y -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -# CONFIG_RPMSG_QCOM_GLINK_RPM is not set -# CONFIG_RPMSG_VIRTIO is not set -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -# CONFIG_SOC_BRCMSTB is not set -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -# end of i.MX SoC drivers - -# -# IXP4xx SoC drivers -# -# CONFIG_IXP4XX_QMGR is not set -# CONFIG_IXP4XX_NPE is not set -# end of IXP4xx SoC drivers - -# -# Qualcomm SoC drivers -# -# end of Qualcomm SoC drivers - -CONFIG_ROCKCHIP_GRF=y -CONFIG_ROCKCHIP_PM_DOMAINS=y -# CONFIG_SOC_TI is not set - -# -# Xilinx SoC drivers -# -# CONFIG_XILINX_VCU is not set -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=m -CONFIG_DEVFREQ_GOV_POWERSAVE=m -CONFIG_DEVFREQ_GOV_USERSPACE=m -CONFIG_DEVFREQ_GOV_PASSIVE=m - -# -# DEVFREQ Drivers -# -CONFIG_ARM_RK3399_DMC_DEVFREQ=m -CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -# CONFIG_EXTCON_ADC_JACK is not set -# CONFIG_EXTCON_GPIO is not set -# CONFIG_EXTCON_MAX3355 is not set -# CONFIG_EXTCON_PALMAS is not set -# CONFIG_EXTCON_PTN5150 is not set -# CONFIG_EXTCON_RT8973A is not set -# CONFIG_EXTCON_SM5502 is not set -# CONFIG_EXTCON_USB_GPIO is not set -# CONFIG_EXTCON_USBC_CROS_EC is not set -# CONFIG_MEMORY is not set -CONFIG_IIO=y -CONFIG_IIO_BUFFER=y -# CONFIG_IIO_BUFFER_CB is not set -# CONFIG_IIO_BUFFER_HW_CONSUMER is not set -CONFIG_IIO_KFIFO_BUF=y -CONFIG_IIO_TRIGGERED_BUFFER=y -# CONFIG_IIO_CONFIGFS is not set -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -# CONFIG_IIO_SW_DEVICE is not set -# CONFIG_IIO_SW_TRIGGER is not set - -# -# Accelerometers -# -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADXL345_I2C is not set -# CONFIG_ADXL345_SPI is not set -# CONFIG_ADXL372_SPI is not set -# CONFIG_ADXL372_I2C is not set -# CONFIG_BMA180 is not set -# CONFIG_BMA220 is not set -# CONFIG_BMC150_ACCEL is not set -# CONFIG_DA280 is not set -# CONFIG_DA311 is not set -# CONFIG_DMARD06 is not set -# CONFIG_DMARD09 is not set -# CONFIG_DMARD10 is not set -# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set -# CONFIG_IIO_ST_ACCEL_3AXIS is not set -# CONFIG_KXSD9 is not set -# CONFIG_KXCJK1013 is not set -# CONFIG_MC3230 is not set -# CONFIG_MMA7455_I2C is not set -# CONFIG_MMA7455_SPI is not set -# CONFIG_MMA7660 is not set -# CONFIG_MMA8452 is not set -# CONFIG_MMA9551 is not set -# CONFIG_MMA9553 is not set -# CONFIG_MXC4005 is not set -# CONFIG_MXC6255 is not set -# CONFIG_SCA3000 is not set -# CONFIG_STK8312 is not set -# CONFIG_STK8BA50 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -# CONFIG_AD7124 is not set -# CONFIG_AD7266 is not set -# CONFIG_AD7291 is not set -# CONFIG_AD7298 is not set -# CONFIG_AD7476 is not set -# CONFIG_AD7606_IFACE_PARALLEL is not set -# CONFIG_AD7606_IFACE_SPI is not set -# CONFIG_AD7766 is not set -# CONFIG_AD7768_1 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7791 is not set -# CONFIG_AD7793 is not set -# CONFIG_AD7887 is not set -# CONFIG_AD7923 is not set -# CONFIG_AD7949 is not set -# CONFIG_AD799X is not set -# CONFIG_AXP20X_ADC is not set -# CONFIG_AXP288_ADC is not set -# CONFIG_CC10001_ADC is not set -# CONFIG_ENVELOPE_DETECTOR is not set -# CONFIG_HI8435 is not set -# CONFIG_HX711 is not set -# CONFIG_INA2XX_ADC is not set -# CONFIG_LTC2471 is not set -# CONFIG_LTC2485 is not set -# CONFIG_LTC2497 is not set -# CONFIG_MAX1027 is not set -# CONFIG_MAX11100 is not set -# CONFIG_MAX1118 is not set -# CONFIG_MAX1363 is not set -# CONFIG_MAX9611 is not set -# CONFIG_MCP320X is not set -# CONFIG_MCP3422 is not set -# CONFIG_MCP3911 is not set -# CONFIG_NAU7802 is not set -# CONFIG_PALMAS_GPADC is not set -CONFIG_ROCKCHIP_SARADC=y -CONFIG_SD_ADC_MODULATOR=y -# CONFIG_TI_ADC081C is not set -# CONFIG_TI_ADC0832 is not set -# CONFIG_TI_ADC084S021 is not set -# CONFIG_TI_ADC12138 is not set -# CONFIG_TI_ADC108S102 is not set -# CONFIG_TI_ADC128S052 is not set -# CONFIG_TI_ADC161S626 is not set -# CONFIG_TI_ADS1015 is not set -# CONFIG_TI_ADS7950 is not set -# CONFIG_TI_ADS8344 is not set -# CONFIG_TI_ADS8688 is not set -# CONFIG_TI_ADS124S08 is not set -# CONFIG_TI_TLC4541 is not set -# CONFIG_TWL4030_MADC is not set -# CONFIG_TWL6030_GPADC is not set -# CONFIG_VF610_ADC is not set -# end of Analog to digital converters - -# -# Analog Front Ends -# -# CONFIG_IIO_RESCALE is not set -# end of Analog Front Ends - -# -# Amplifiers -# -# CONFIG_AD8366 is not set -# end of Amplifiers - -# -# Chemical Sensors -# -# CONFIG_ATLAS_PH_SENSOR is not set -# CONFIG_BME680 is not set -# CONFIG_CCS811 is not set -# CONFIG_IAQCORE is not set -# CONFIG_SENSIRION_SGP30 is not set -# CONFIG_SPS30 is not set -# CONFIG_VZ89X is not set -# end of Chemical Sensors - -# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set - -# -# Hid Sensor IIO Common -# -# end of Hid Sensor IIO Common - -# -# SSP Sensor Common -# -# CONFIG_IIO_SSP_SENSORHUB is not set -# end of SSP Sensor Common - -# -# Digital to analog converters -# -# CONFIG_AD5064 is not set -# CONFIG_AD5360 is not set -# CONFIG_AD5380 is not set -# CONFIG_AD5421 is not set -# CONFIG_AD5446 is not set -# CONFIG_AD5449 is not set -# CONFIG_AD5592R is not set -# CONFIG_AD5593R is not set -# CONFIG_AD5504 is not set -# CONFIG_AD5624R_SPI is not set -# CONFIG_LTC1660 is not set -# CONFIG_LTC2632 is not set -# CONFIG_AD5686_SPI is not set -# CONFIG_AD5696_I2C is not set -# CONFIG_AD5755 is not set -# CONFIG_AD5758 is not set -# CONFIG_AD5761 is not set -# CONFIG_AD5764 is not set -# CONFIG_AD5791 is not set -# CONFIG_AD7303 is not set -# CONFIG_AD8801 is not set -# CONFIG_DPOT_DAC is not set -# CONFIG_DS4424 is not set -# CONFIG_M62332 is not set -# CONFIG_MAX517 is not set -# CONFIG_MAX5821 is not set -# CONFIG_MCP4725 is not set -# CONFIG_MCP4922 is not set -# CONFIG_TI_DAC082S085 is not set -# CONFIG_TI_DAC5571 is not set -# CONFIG_TI_DAC7311 is not set -# CONFIG_TI_DAC7612 is not set -# CONFIG_VF610_DAC is not set -# end of Digital to analog converters - -# -# IIO dummy driver -# -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -# CONFIG_AD9523 is not set -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -# CONFIG_ADF4350 is not set -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -# CONFIG_ADIS16080 is not set -# CONFIG_ADIS16130 is not set -# CONFIG_ADIS16136 is not set -# CONFIG_ADIS16260 is not set -# CONFIG_ADXRS450 is not set -# CONFIG_BMG160 is not set -# CONFIG_FXAS21002C is not set -# CONFIG_MPU3050_I2C is not set -# CONFIG_IIO_ST_GYRO_3AXIS is not set -# CONFIG_ITG3200 is not set -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -# CONFIG_AFE4403 is not set -# CONFIG_AFE4404 is not set -# CONFIG_MAX30100 is not set -# CONFIG_MAX30102 is not set -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -# CONFIG_AM2315 is not set -# CONFIG_DHT11 is not set -# CONFIG_HDC100X is not set -# CONFIG_HTS221 is not set -# CONFIG_HTU21 is not set -# CONFIG_SI7005 is not set -# CONFIG_SI7020 is not set -# end of Humidity sensors - -# -# Inertial measurement units -# -# CONFIG_ADIS16400 is not set -# CONFIG_ADIS16480 is not set -# CONFIG_BMI160_I2C is not set -# CONFIG_BMI160_SPI is not set -# CONFIG_KMX61 is not set -# CONFIG_INV_MPU6050_I2C is not set -# CONFIG_INV_MPU6050_SPI is not set -# CONFIG_IIO_ST_LSM6DSX is not set -# end of Inertial measurement units - -# -# Light sensors -# -# CONFIG_ADJD_S311 is not set -# CONFIG_AL3320A is not set -# CONFIG_APDS9300 is not set -# CONFIG_APDS9960 is not set -# CONFIG_BH1750 is not set -# CONFIG_BH1780 is not set -# CONFIG_CM32181 is not set -# CONFIG_CM3232 is not set -# CONFIG_CM3323 is not set -# CONFIG_CM3605 is not set -# CONFIG_CM36651 is not set -# CONFIG_GP2AP020A00F is not set -# CONFIG_SENSORS_ISL29018 is not set -# CONFIG_SENSORS_ISL29028 is not set -# CONFIG_ISL29125 is not set -# CONFIG_JSA1212 is not set -# CONFIG_RPR0521 is not set -# CONFIG_LTR501 is not set -# CONFIG_LV0104CS is not set -# CONFIG_MAX44000 is not set -# CONFIG_MAX44009 is not set -# CONFIG_OPT3001 is not set -# CONFIG_PA12203001 is not set -# CONFIG_SI1133 is not set -# CONFIG_SI1145 is not set -# CONFIG_STK3310 is not set -# CONFIG_ST_UVIS25 is not set -# CONFIG_TCS3414 is not set -# CONFIG_TCS3472 is not set -# CONFIG_SENSORS_TSL2563 is not set -# CONFIG_TSL2583 is not set -# CONFIG_TSL2772 is not set -# CONFIG_TSL4531 is not set -# CONFIG_US5182D is not set -# CONFIG_VCNL4000 is not set -# CONFIG_VCNL4035 is not set -# CONFIG_VEML6070 is not set -# CONFIG_VL6180 is not set -# CONFIG_ZOPT2201 is not set -# end of Light sensors - -# -# Magnetometer sensors -# -# CONFIG_AK8974 is not set -# CONFIG_AK8975 is not set -# CONFIG_AK09911 is not set -# CONFIG_BMC150_MAGN_I2C is not set -# CONFIG_BMC150_MAGN_SPI is not set -# CONFIG_MAG3110 is not set -# CONFIG_MMC35240 is not set -# CONFIG_IIO_ST_MAGN_3AXIS is not set -# CONFIG_SENSORS_HMC5843_I2C is not set -# CONFIG_SENSORS_HMC5843_SPI is not set -# CONFIG_SENSORS_RM3100_I2C is not set -# CONFIG_SENSORS_RM3100_SPI is not set -# end of Magnetometer sensors - -# -# Multiplexers -# -# CONFIG_IIO_MUX is not set -# end of Multiplexers - -# -# Inclinometer sensors -# -# end of Inclinometer sensors - -# -# Triggers - standalone -# -# CONFIG_IIO_INTERRUPT_TRIGGER is not set -CONFIG_IIO_SYSFS_TRIGGER=y -# end of Triggers - standalone - -# -# Digital potentiometers -# -# CONFIG_AD5272 is not set -# CONFIG_DS1803 is not set -# CONFIG_MAX5481 is not set -# CONFIG_MAX5487 is not set -# CONFIG_MCP4018 is not set -# CONFIG_MCP4131 is not set -# CONFIG_MCP4531 is not set -# CONFIG_MCP41010 is not set -# CONFIG_TPL0102 is not set -# end of Digital potentiometers - -# -# Digital potentiostats -# -# CONFIG_LMP91000 is not set -# end of Digital potentiostats - -# -# Pressure sensors -# -# CONFIG_ABP060MG is not set -# CONFIG_BMP280 is not set -# CONFIG_HP03 is not set -# CONFIG_MPL115_I2C is not set -# CONFIG_MPL115_SPI is not set -# CONFIG_MPL3115 is not set -# CONFIG_MS5611 is not set -# CONFIG_MS5637 is not set -# CONFIG_IIO_ST_PRESS is not set -# CONFIG_T5403 is not set -# CONFIG_HP206C is not set -# CONFIG_ZPA2326 is not set -# end of Pressure sensors - -# -# Lightning sensors -# -# CONFIG_AS3935 is not set -# end of Lightning sensors - -# -# Proximity and distance sensors -# -# CONFIG_ISL29501 is not set -# CONFIG_LIDAR_LITE_V2 is not set -# CONFIG_MB1232 is not set -# CONFIG_RFD77402 is not set -# CONFIG_SRF04 is not set -# CONFIG_SX9500 is not set -# CONFIG_SRF08 is not set -# CONFIG_VL53L0X_I2C is not set -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -# CONFIG_AD2S90 is not set -# CONFIG_AD2S1200 is not set -# end of Resolver to digital converters - -# -# Temperature sensors -# -# CONFIG_MAXIM_THERMOCOUPLE is not set -# CONFIG_MLX90614 is not set -# CONFIG_MLX90632 is not set -# CONFIG_TMP006 is not set -# CONFIG_TMP007 is not set -# CONFIG_TSYS01 is not set -# CONFIG_TSYS02D is not set -# CONFIG_MAX31856 is not set -# end of Temperature sensors - -# CONFIG_NTB is not set -# CONFIG_VME_BUS is not set -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_PWM_CROS_EC=y -# CONFIG_PWM_FSL_FTM is not set -# CONFIG_PWM_PCA9685 is not set -CONFIG_PWM_ROCKCHIP=y -# CONFIG_PWM_TWL is not set -# CONFIG_PWM_TWL_LED is not set - -# -# IRQ chip support -# -CONFIG_IRQCHIP=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_MAX_NR=1 -# end of IRQ chip support - -# CONFIG_IPACK_BUS is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_TI_SYSCON is not set -# CONFIG_FMC is not set - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -# CONFIG_BCM_KONA_USB2_PHY is not set -# CONFIG_PHY_CADENCE_DP is not set -# CONFIG_PHY_CADENCE_DPHY is not set -# CONFIG_PHY_CADENCE_SIERRA is not set -# CONFIG_PHY_FSL_IMX8MQ_USB is not set -# CONFIG_PHY_PXA_28NM_HSIC is not set -# CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_PHY_CPCAP_USB is not set -# CONFIG_PHY_MAPPHONE_MDM6600 is not set -# CONFIG_PHY_OCELOT_SERDES is not set -CONFIG_PHY_ROCKCHIP_DP=y -CONFIG_PHY_ROCKCHIP_EMMC=y -# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set -# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set -# CONFIG_PHY_ROCKCHIP_PCIE is not set -# CONFIG_PHY_ROCKCHIP_TYPEC is not set -CONFIG_PHY_ROCKCHIP_USB=y -# CONFIG_PHY_SAMSUNG_USB2 is not set -# end of PHY Subsystem - -# CONFIG_POWERCAP is not set -# CONFIG_MCB is not set - -# -# Performance monitor support -# -# CONFIG_ARM_CCI_PMU is not set -# CONFIG_ARM_CCN is not set -CONFIG_ARM_PMU=y -# end of Performance monitor support - -CONFIG_RAS=y - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -# CONFIG_LIBNVDIMM is not set -# CONFIG_DAX is not set -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_ROCKCHIP_EFUSE=y - -# -# HW tracing support -# -# CONFIG_STM is not set -# CONFIG_INTEL_TH is not set -# end of HW tracing support - -# CONFIG_FPGA is not set -# CONFIG_FSI is not set -# CONFIG_TEE is not set -CONFIG_PM_OPP=y -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -# CONFIG_COUNTER is not set -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -# CONFIG_NILFS2_FS is not set -# CONFIG_F2FS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -# CONFIG_EXPORTFS_BLOCK_OPS is not set -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FSNOTIFY=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=m -# CONFIG_CUSE is not set -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=y -# CONFIG_FSCACHE_STATS is not set -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=y -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=850 -CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -CONFIG_FAT_DEFAULT_UTF8=y -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y -# end of DOS/FAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -# CONFIG_HUGETLBFS is not set -CONFIG_MEMFD_CREATE=y -CONFIG_CONFIGFS_FS=y -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ORANGEFS_FS is not set -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_ECRYPT_FS=y -# CONFIG_ECRYPT_FS_MESSAGING is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -# CONFIG_SQUASHFS_XATTR is not set -CONFIG_SQUASHFS_ZLIB=y -# CONFIG_SQUASHFS_LZ4 is not set -# CONFIG_SQUASHFS_LZO is not set -# CONFIG_SQUASHFS_XZ is not set -# CONFIG_SQUASHFS_ZSTD is not set -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX6FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_PSTORE is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=y -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_MAC_ROMAN is not set -# CONFIG_NLS_MAC_CELTIC is not set -# CONFIG_NLS_MAC_CENTEURO is not set -# CONFIG_NLS_MAC_CROATIAN is not set -# CONFIG_NLS_MAC_CYRILLIC is not set -# CONFIG_NLS_MAC_GAELIC is not set -# CONFIG_NLS_MAC_GREEK is not set -# CONFIG_NLS_MAC_ICELAND is not set -# CONFIG_NLS_MAC_INUIT is not set -# CONFIG_NLS_MAC_ROMANIAN is not set -# CONFIG_NLS_MAC_TURKISH is not set -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set -# CONFIG_UNICODE is not set -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_TRUSTED_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_KEY_DH_OPERATIONS is not set -# CONFIG_SECURITY_DMESG_RESTRICT is not set -# CONFIG_SECURITY is not set -CONFIG_SECURITYFS=y -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -# CONFIG_FORTIFY_SOURCE is not set -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_LSM="yama,loadpin,safesetid,integrity" - -# -# Kernel hardening options -# -CONFIG_GCC_PLUGIN_STRUCTLEAK=y - -# -# Memory initialization -# -# CONFIG_INIT_STACK_NONE is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set -CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y -# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_USER is not set -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -# CONFIG_CRYPTO_PCRYPT is not set -CONFIG_CRYPTO_WORKQUEUE=y -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -# CONFIG_CRYPTO_DH is not set -CONFIG_CRYPTO_ECC=y -CONFIG_CRYPTO_ECDH=y -CONFIG_CRYPTO_ECRDSA=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=y -CONFIG_CRYPTO_GCM=y -# CONFIG_CRYPTO_CHACHA20POLY1305 is not set -# CONFIG_CRYPTO_AEGIS128 is not set -# CONFIG_CRYPTO_AEGIS128L is not set -# CONFIG_CRYPTO_AEGIS256 is not set -# CONFIG_CRYPTO_MORUS640 is not set -# CONFIG_CRYPTO_MORUS1280 is not set -CONFIG_CRYPTO_SEQIV=y -# CONFIG_CRYPTO_ECHAINIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CFB is not set -CONFIG_CRYPTO_CTR=y -# CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_OFB is not set -# CONFIG_CRYPTO_PCBC is not set -CONFIG_CRYPTO_XTS=y -# CONFIG_CRYPTO_KEYWRAP is not set -# CONFIG_CRYPTO_ADIANTUM is not set - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_CRC32 is not set -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=y -# CONFIG_CRYPTO_POLY1305 is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_SHA3 is not set -# CONFIG_CRYPTO_SM3 is not set -CONFIG_CRYPTO_STREEBOG=m -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_TI is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_ARC4=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_CHACHA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_SM4 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_842 is not set -CONFIG_CRYPTO_LZ4=y -# CONFIG_CRYPTO_LZ4HC is not set -# CONFIG_CRYPTO_ZSTD is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_DRBG_HMAC=y -# CONFIG_CRYPTO_DRBG_HASH is not set -# CONFIG_CRYPTO_DRBG_CTR is not set -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_JITTERENTROPY=y -# CONFIG_CRYPTO_USER_API_HASH is not set -# CONFIG_CRYPTO_USER_API_SKCIPHER is not set -# CONFIG_CRYPTO_USER_API_RNG is not set -# CONFIG_CRYPTO_USER_API_AEAD is not set -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_ROCKCHIP=y -CONFIG_CRYPTO_DEV_VIRTIO=m -# CONFIG_CRYPTO_DEV_CCREE is not set -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_X509_CERTIFICATE_PARSER=y -# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -# CONFIG_PACKING is not set -CONFIG_BITREVERSE=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -# CONFIG_CORDIC is not set -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -# CONFIG_CRC64 is not set -# CONFIG_CRC4 is not set -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y -# CONFIG_CRC8 is not set -CONFIG_XXHASH=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=y -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -# CONFIG_XZ_DEC_SPARC is not set -CONFIG_XZ_DEC_BCJ=y -# CONFIG_XZ_DEC_TEST is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_XARRAY_MULTI=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=16 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_CLZ_TAB=y -CONFIG_DDR=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_LIBFDT=y -CONFIG_OID_REGISTRY=y -CONFIG_FONT_SUPPORT=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_SG_POOL=y -CONFIG_SBITMAP=y -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=8 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -# CONFIG_BOOT_PRINTK_DELAY is not set -CONFIG_DYNAMIC_DEBUG=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_INFO_REDUCED is not set -# CONFIG_DEBUG_INFO_SPLIT is not set -# CONFIG_DEBUG_INFO_DWARF4 is not set -# CONFIG_DEBUG_INFO_BTF is not set -# CONFIG_GDB_SCRIPTS is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_OPTIMIZE_INLINING=y -# CONFIG_DEBUG_SECTION_MISMATCH is not set -# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 -# CONFIG_MAGIC_SYSRQ_SERIAL is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_OWNER is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -# CONFIG_SOFTLOCKUP_DETECTOR is not set -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=300 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# end of Debug Lockups and Hangs - -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_TIMEKEEPING is not set -# CONFIG_DEBUG_PREEMPT is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -# CONFIG_WW_MUTEX_SELFTEST is not set -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -CONFIG_STACK_TRACER=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_KPROBE_EVENTS is not set -CONFIG_UPROBE_EVENTS=y -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_RUNTIME_TESTING_MENU is not set -# CONFIG_MEMTEST is not set -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_UBSAN is not set -CONFIG_UBSAN_ALIGNMENT=y -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -# CONFIG_STRICT_DEVMEM is not set -# CONFIG_ARM_PTDUMP_DEBUGFS is not set -# CONFIG_DEBUG_WX is not set -CONFIG_UNWINDER_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_LL is not set -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -# CONFIG_ARM_KPROBES_TEST is not set -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_CORESIGHT is not set -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.2-arm.conf b/gnu/packages/aux-files/linux-libre/5.2-arm.conf deleted file mode 100644 index 7cab0ab66c..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.2-arm.conf +++ /dev/null @@ -1,9115 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/arm 5.2.0-gnu Kernel Configuration -# - -# -# Compiler: gcc (GCC) 7.4.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=70400 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_LZMA is not set -CONFIG_KERNEL_XZ=y -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_USELIB is not set -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -# CONFIG_NO_HZ is not set -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -# CONFIG_CGROUP_BPF is not set -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -# CONFIG_SGETMASK_SYSCALL is not set -# CONFIG_SYSFS_SYSCALL is not set -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_SYSCALL=y -# CONFIG_BPF_JIT_ALWAYS_ON is not set -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_ARM=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_DMA_USE_IOMMU=y -CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_NO_IOPORT_MAP=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_ARCH_HAS_BANDGAP=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIQ=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_GENERIC_BUG=y -CONFIG_PGTABLE_LEVELS=2 - -# -# System Type -# -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_BITS_MAX=16 -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_LPC32XX is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP1 is not set - -# -# Multiple platform selection -# - -# -# CPU Core family selection -# -# CONFIG_ARCH_MULTI_V6 is not set -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MULTI_V6_V7=y -# end of Multiple platform selection - -CONFIG_ARCH_VIRT=y -# CONFIG_ARCH_ACTIONS is not set -# CONFIG_ARCH_ALPINE is not set -# CONFIG_ARCH_ARTPEC is not set -# CONFIG_ARCH_AT91 is not set -CONFIG_ARCH_BCM=y - -# -# IPROC architected SoCs -# -# CONFIG_ARCH_BCM_CYGNUS is not set -# CONFIG_ARCH_BCM_HR2 is not set -# CONFIG_ARCH_BCM_NSP is not set -# CONFIG_ARCH_BCM_5301X is not set - -# -# KONA architected SoCs -# -# CONFIG_ARCH_BCM_281XX is not set -# CONFIG_ARCH_BCM_21664 is not set -# CONFIG_ARCH_BCM_23550 is not set - -# -# Other Architectures -# -CONFIG_ARCH_BCM2835=y -# CONFIG_ARCH_BCM_53573 is not set -# CONFIG_ARCH_BCM_63XX is not set -# CONFIG_ARCH_BRCMSTB is not set -# CONFIG_ARCH_BERLIN is not set -# CONFIG_ARCH_DIGICOLOR is not set -CONFIG_ARCH_EXYNOS=y -CONFIG_S5P_DEV_MFC=y -# CONFIG_ARCH_EXYNOS3 is not set -CONFIG_ARCH_EXYNOS4=y -CONFIG_ARCH_EXYNOS5=y - -# -# EXYNOS SoCs -# -CONFIG_CPU_EXYNOS4210=y -CONFIG_SOC_EXYNOS4412=y -CONFIG_SOC_EXYNOS5250=y -CONFIG_SOC_EXYNOS5260=y -CONFIG_SOC_EXYNOS5410=y -CONFIG_SOC_EXYNOS5420=y -CONFIG_SOC_EXYNOS5800=y -CONFIG_EXYNOS_CPU_SUSPEND=y -CONFIG_PLAT_SAMSUNG=y - -# -# Samsung Common options -# - -# -# Boot options -# - -# -# Power management -# -# end of Samsung Common options - -CONFIG_ARCH_HIGHBANK=y -# CONFIG_ARCH_HISI is not set -CONFIG_ARCH_MXC=y -CONFIG_MXC_TZIC=y -CONFIG_HAVE_IMX_ANATOP=y -CONFIG_HAVE_IMX_GPC=y -CONFIG_HAVE_IMX_MMDC=y -CONFIG_HAVE_IMX_SRC=y - -# -# Device tree only -# - -# -# Cortex-A platforms -# -CONFIG_SOC_IMX5=y -# CONFIG_SOC_IMX50 is not set -CONFIG_SOC_IMX51=y -CONFIG_SOC_IMX53=y -CONFIG_SOC_IMX6=y -CONFIG_SOC_IMX6Q=y -# CONFIG_SOC_IMX6SL is not set -# CONFIG_SOC_IMX6SLL is not set -# CONFIG_SOC_IMX6SX is not set -# CONFIG_SOC_IMX6UL is not set -# CONFIG_SOC_LS1021A is not set - -# -# Cortex-A/Cortex-M asymmetric multiprocessing platforms -# -# CONFIG_SOC_IMX7D is not set -# CONFIG_SOC_IMX7ULP is not set -# CONFIG_SOC_VF610 is not set -# CONFIG_ARCH_KEYSTONE is not set -# CONFIG_ARCH_MEDIATEK is not set -# CONFIG_ARCH_MESON is not set -# CONFIG_ARCH_MILBEAUT is not set -# CONFIG_ARCH_MMP is not set -CONFIG_ARCH_MVEBU=y -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MACH_MVEBU_V7=y -CONFIG_MACH_ARMADA_370=y -CONFIG_MACH_ARMADA_375=y -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_39X=y -CONFIG_MACH_ARMADA_XP=y -# CONFIG_MACH_DOVE is not set -# CONFIG_ARCH_NPCM is not set -CONFIG_ARCH_OMAP=y - -# -# TI OMAP Common Features -# - -# -# OMAP Feature Selections -# -CONFIG_POWER_AVS_OMAP=y -CONFIG_POWER_AVS_OMAP_CLASS3=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_32K_TIMER=y -# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set -# end of TI OMAP Common Features - -CONFIG_MACH_OMAP_GENERIC=y - -# -# TI OMAP/AM/DM/DRA Family -# -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y -CONFIG_SOC_OMAP5=y -CONFIG_SOC_AM33XX=y -# CONFIG_SOC_AM43XX is not set -CONFIG_SOC_DRA7XX=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_OMAP_INTERCONNECT_BARRIER=y - -# -# TI OMAP2/3/4 Specific Features -# -CONFIG_ARCH_OMAP2PLUS_TYPICAL=y -CONFIG_SOC_HAS_OMAP2_SDRC=y -CONFIG_SOC_HAS_REALTIME_COUNTER=y -CONFIG_SOC_OMAP3430=y -CONFIG_SOC_TI81XX=y -CONFIG_OMAP_PACKAGE_CBB=y - -# -# OMAP Legacy Platform Data Board Type -# -CONFIG_MACH_OMAP3517EVM=y -CONFIG_MACH_OMAP3_PANDORA=y -# CONFIG_OMAP3_SDRC_AC_TIMING is not set -# end of TI OMAP2/3/4 Specific Features - -# CONFIG_OMAP5_ERRATA_801819 is not set -# end of TI OMAP/AM/DM/DRA Family - -# CONFIG_ARCH_SIRF is not set -# CONFIG_ARCH_QCOM is not set -# CONFIG_ARCH_RDA is not set -# CONFIG_ARCH_REALVIEW is not set -CONFIG_ARCH_ROCKCHIP=y -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_RENESAS is not set -CONFIG_ARCH_SOCFPGA=y -# CONFIG_SOCFPGA_SUSPEND is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_ARCH_STI is not set -# CONFIG_ARCH_STM32 is not set -CONFIG_ARCH_SUNXI=y -CONFIG_MACH_SUN4I=y -CONFIG_MACH_SUN5I=y -CONFIG_MACH_SUN6I=y -CONFIG_MACH_SUN7I=y -CONFIG_MACH_SUN8I=y -CONFIG_MACH_SUN9I=y -CONFIG_ARCH_SUNXI_MC_SMP=y -# CONFIG_ARCH_TANGO is not set -CONFIG_ARCH_TEGRA=y -# CONFIG_ARCH_UNIPHIER is not set -# CONFIG_ARCH_U8500 is not set -CONFIG_ARCH_VEXPRESS=y -CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y -# CONFIG_ARCH_VEXPRESS_DCSCB is not set -# CONFIG_ARCH_VEXPRESS_SPC is not set -# CONFIG_ARCH_VEXPRESS_TC2_PM is not set -CONFIG_ARCH_VT8500=y -CONFIG_ARCH_WM8850=y -# CONFIG_ARCH_ZX is not set -# CONFIG_ARCH_ZYNQ is not set -CONFIG_PLAT_ORION=y -CONFIG_PLAT_VERSATILE=y - -# -# Processor Type -# -CONFIG_CPU_PJ4B=y -CONFIG_CPU_V7=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_THUMBEE=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_SWP_EMULATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_SPECTRE=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_KUSER_HELPERS=y -CONFIG_VDSO=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_CACHE_FEROCEON_L2=y -# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_CACHE_L2X0=y -# CONFIG_CACHE_L2X0_PMU is not set -CONFIG_PL310_ERRATA_588369=y -CONFIG_PL310_ERRATA_727915=y -CONFIG_PL310_ERRATA_753970=y -CONFIG_PL310_ERRATA_769419=y -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_DMA_MEM_BUFFERABLE=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_IWMMXT=y -CONFIG_PJ4B_ERRATA_4742=y -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_643719=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_754327=y -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_ERRATA_798181=y -CONFIG_ARM_ERRATA_773022=y -# CONFIG_ARM_ERRATA_818325_852422 is not set -# CONFIG_ARM_ERRATA_821420 is not set -# CONFIG_ARM_ERRATA_825619 is not set -# CONFIG_ARM_ERRATA_852421 is not set -# CONFIG_ARM_ERRATA_852423 is not set -# end of System Type - -# -# Bus support -# -# end of Bus support - -# -# Kernel Features -# -CONFIG_HAVE_SMP=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_ARM_CPU_TOPOLOGY=y -# CONFIG_SCHED_MC is not set -# CONFIG_SCHED_SMT is not set -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_ARCH_TIMER=y -CONFIG_HAVE_ARM_TWD=y -CONFIG_MCPM=y -# CONFIG_BIG_LITTLE is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_NR_CPUS=8 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARM_PSCI=y -CONFIG_ARCH_NR_GPIO=2048 -CONFIG_HZ_FIXED=0 -# CONFIG_HZ_100 is not set -# CONFIG_HZ_200 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_500 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_ARM_PATCH_IDIV=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_CPU_SW_DOMAIN_PAN=y -CONFIG_HW_PERF_EVENTS=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -# CONFIG_ARM_MODULE_PLTS is not set -CONFIG_FORCE_MAX_ZONEORDER=12 -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_UACCESS_WITH_MEMCPY is not set -CONFIG_SECCOMP=y -CONFIG_PARAVIRT=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_XEN_DOM0=y -CONFIG_XEN=y -CONFIG_STACKPROTECTOR_PER_TASK=y -# end of Kernel Features - -# -# Boot options -# -CONFIG_USE_OF=y -CONFIG_ATAGS=y -# CONFIG_DEPRECATED_PARAM_STRUCT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_CMDLINE="" -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y -# CONFIG_CRASH_DUMP is not set -CONFIG_AUTO_ZRELADDR=y -CONFIG_EFI_STUB=y -CONFIG_EFI=y -CONFIG_DMI=y -# end of Boot options - -# -# CPU Power Management -# - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_CPUFREQ_DT=m -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_ARM_ARMADA_37XX_CPUFREQ=m -CONFIG_ARM_ARMADA_8K_CPUFREQ=m -# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set -CONFIG_ARM_HIGHBANK_CPUFREQ=m -CONFIG_ARM_IMX6Q_CPUFREQ=m -CONFIG_ARM_OMAP2PLUS_CPUFREQ=y -CONFIG_ARM_SCMI_CPUFREQ=m -CONFIG_ARM_TEGRA20_CPUFREQ=y -CONFIG_ARM_TEGRA124_CPUFREQ=y -# CONFIG_ARM_TI_CPUFREQ is not set -# CONFIG_QORIQ_CPUFREQ is not set -# end of CPU Frequency scaling - -# -# CPU Idle -# -# CONFIG_CPU_IDLE is not set -CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y -# end of CPU Idle -# end of CPU Power Management - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_NEON=y -# CONFIG_KERNEL_MODE_NEON is not set -# end of Floating point emulation - -# -# Power management options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -CONFIG_APM_EMULATION=y -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_PM_GENERIC_DOMAINS_SLEEP=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_CPU_PM=y -CONFIG_ENERGY_MODEL=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# end of Power management options - -# -# Firmware Drivers -# -CONFIG_ARM_SCMI_PROTOCOL=y -CONFIG_ARM_SCMI_POWER_DOMAIN=m -# CONFIG_ARM_SCPI_PROTOCOL is not set -# CONFIG_FIRMWARE_MEMMAP is not set -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=y -CONFIG_RASPBERRYPI_FIRMWARE=y -CONFIG_TRUSTED_FOUNDATIONS=y -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_ARM_PSCI_FW=y -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=m -CONFIG_EFI_ESRT=y -CONFIG_EFI_PARAMS_FROM_FDT=y -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_ARMSTUB=y -CONFIG_EFI_ARMSTUB_DTB_LOADER=y -# CONFIG_EFI_BOOTLOADER_CONTROL is not set -# CONFIG_EFI_CAPSULE_LOADER is not set -# CONFIG_EFI_TEST is not set -CONFIG_RESET_ATTACK_MITIGATION=y -# end of EFI (Extensible Firmware Interface) Support - -# CONFIG_IMX_SCU is not set - -# -# Tegra firmware driver -# -# CONFIG_TEGRA_IVC is not set -# end of Tegra firmware driver -# end of Firmware Drivers - -# CONFIG_ARM_CRYPTO is not set -# CONFIG_VIRTUALIZATION is not set - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_OPROFILE=m -CONFIG_HAVE_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_UPROBES=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=8 -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y -CONFIG_64BIT_TIME=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_REFCOUNT_FULL=y -# CONFIG_LOCK_EVENT_COUNTS is not set - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_PLUGIN_HOSTCC="g++" -CONFIG_HAVE_GCC_PLUGINS=y -CONFIG_GCC_PLUGINS=y - -# -# GCC plugins -# -# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set -# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set -# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -CONFIG_GCC_PLUGIN_ARM_SSP_PER_TASK=y -# end of GCC plugins -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_TRIM_UNUSED_KSYMS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -# CONFIG_BLK_DEV_ZONED is not set -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -# CONFIG_BLK_CMDLINE_PARSER is not set -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set -# end of Partition Types - -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -CONFIG_BFQ_GROUP_IOSCHED=y -# end of IO Schedulers - -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_ELF_FDPIC is not set -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -# CONFIG_BINFMT_FLAT is not set -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_BOUNCE=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -# CONFIG_CLEANCACHE is not set -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_ZSWAP=y -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -# CONFIG_Z3FOLD is not set -CONFIG_ZSMALLOC=m -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_FRAME_VECTOR=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -# end of Memory Management options - -CONFIG_NET=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -# CONFIG_TLS is not set -CONFIG_XFRM=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_MIGRATE=y -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_ESP_OFFLOAD is not set -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -# CONFIG_INET_RAW_DIAG is not set -CONFIG_INET_DIAG_DESTROY=y -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -# CONFIG_INET6_ESP_OFFLOAD is not set -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -# CONFIG_IPV6_SEG6_LWTUNNEL is not set -# CONFIG_IPV6_SEG6_HMAC is not set -# CONFIG_NETLABEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -CONFIG_NF_CONNTRACK_PROCFS=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_SET=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_FLOW_OFFLOAD=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -# CONFIG_IP_SET_HASH_IPMAC is not set -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_TABLES_BRIDGE=y -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=y -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_TFRC_LIB=y -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_CBS=m -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -# CONFIG_NET_ACT_SAMPLE is not set -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -CONFIG_NET_CLS_IND=y -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=m -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=y -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -# CONFIG_HSR is not set -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -# CONFIG_NET_NCSI is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -CONFIG_BPF_JIT=y -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NET_DROP_MONITOR=m -# end of Network testing -# end of Networking options - -# CONFIG_HAMRADIO is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -# CONFIG_CAN_VXCAN is not set -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -# CONFIG_CAN_FLEXCAN is not set -# CONFIG_CAN_GRCAN is not set -CONFIG_CAN_SUN4I=m -# CONFIG_CAN_TI_HECC is not set -# CONFIG_CAN_C_CAN is not set -# CONFIG_CAN_CC770 is not set -# CONFIG_CAN_IFI_CANFD is not set -# CONFIG_CAN_M_CAN is not set -# CONFIG_CAN_PEAK_PCIEFD is not set -# CONFIG_CAN_RCAR is not set -# CONFIG_CAN_RCAR_CANFD is not set -CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -# CONFIG_CAN_SJA1000_PLATFORM is not set -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SOFTING=m - -# -# CAN SPI interfaces -# -# CONFIG_CAN_HI311X is not set -# CONFIG_CAN_MCP251X is not set -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -# CONFIG_CAN_MCBA_USB is not set -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -# CONFIG_BT_LEDS is not set -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_WILINK=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -CONFIG_RXKAD=y -# CONFIG_AF_KCM is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=m -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -# CONFIG_RFKILL_GPIO is not set -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -# CONFIG_NET_9P_XEN is not set -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -# CONFIG_CAIF is not set -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -# CONFIG_NFC_NCI is not set -# CONFIG_NFC_HCI is not set - -# -# Near Field Communication (NFC) devices -# -# CONFIG_NFC_TRF7970A is not set -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -# CONFIG_NFC_PN533_I2C is not set -# CONFIG_NFC_ST95HF is not set -# end of Near Field Communication (NFC) devices - -# CONFIG_PSAMPLE is not set -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=m -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_ARM_AMBA=y -CONFIG_TEGRA_AHB=y -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -CONFIG_PCIEAER_INJECT=m -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_STUB=m -CONFIG_PCI_ECAM=y -CONFIG_PCI_BRIDGE_EMUL=y -# CONFIG_PCI_IOV is not set -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set -CONFIG_PCI_LABEL=y -# CONFIG_HOTPLUG_PCI is not set - -# -# PCI controller drivers -# -CONFIG_PCI_MVEBU=y - -# -# Cadence PCIe controllers support -# -# CONFIG_PCIE_CADENCE_HOST is not set -# end of Cadence PCIe controllers support - -# CONFIG_PCI_FTPCI100 is not set -CONFIG_PCI_TEGRA=y -CONFIG_PCI_HOST_COMMON=y -CONFIG_PCI_HOST_GENERIC=y -# CONFIG_PCIE_XILINX is not set -# CONFIG_PCI_V3_SEMI is not set -# CONFIG_PCIE_ALTERA is not set -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_HOST=m - -# -# DesignWare PCI Core Support -# -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCI_DRA7XX=y -CONFIG_PCI_DRA7XX_HOST=y -# CONFIG_PCIE_DW_PLAT_HOST is not set -CONFIG_PCI_IMX6=y -# CONFIG_PCI_LAYERSCAPE is not set -# CONFIG_PCIE_ARMADA_8K is not set -# CONFIG_PCI_MESON is not set -# end of DesignWare PCI Core Support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -# CONFIG_PCI_SW_SWITCHTEC is not set -# end of PCI switch controller drivers - -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Generic Driver Options -# -# CONFIG_UEVENT_HELPER is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_SOC_BUS=y -CONFIG_REGMAP=y -CONFIG_REGMAP_AC97=m -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_W1=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -CONFIG_GENERIC_ARCH_TOPOLOGY=y -# end of Generic Driver Options - -# -# Bus devices -# -CONFIG_ARM_CCI=y -CONFIG_ARM_CCI400_COMMON=y -CONFIG_ARM_CCI400_PORT_CTRL=y -# CONFIG_BRCMSTB_GISB_ARB is not set -# CONFIG_IMX_WEIM is not set -CONFIG_MVEBU_MBUS=y -CONFIG_OMAP_INTERCONNECT=y -CONFIG_OMAP_OCP2SCP=m -# CONFIG_SIMPLE_PM_BUS is not set -CONFIG_SUN50I_DE2_BUS=y -CONFIG_SUNXI_RSB=y -# CONFIG_TEGRA_GMI is not set -CONFIG_TI_SYSC=y -CONFIG_VEXPRESS_CONFIG=y -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_MTD=y -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_OF_PARTS=m -CONFIG_MTD_AR7_PARTS=m - -# -# Partition parsers -# -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -# CONFIG_SM_FTL is not set -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_RAM=m -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_PHYSMAP_OF is not set -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -# CONFIG_MTD_DATAFLASH_OTP is not set -CONFIG_MTD_M25P80=m -# CONFIG_MTD_MCHP23K256 is not set -CONFIG_MTD_SST25L=m -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOCG3 is not set -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -# CONFIG_MTD_ONENAND_GENERIC is not set -CONFIG_MTD_ONENAND_OMAP2=m -# CONFIG_MTD_ONENAND_SAMSUNG is not set -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -# CONFIG_MTD_NAND_DENALI_PCI is not set -# CONFIG_MTD_NAND_DENALI_DT is not set -CONFIG_MTD_NAND_OMAP2=m -# CONFIG_MTD_NAND_OMAP_BCH is not set -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_ORION=m -CONFIG_MTD_NAND_MARVELL=m -# CONFIG_MTD_NAND_BRCMNAND is not set -CONFIG_MTD_NAND_GPMI_NAND=m -CONFIG_MTD_NAND_MXC=m -CONFIG_MTD_NAND_SUNXI=m -CONFIG_MTD_NAND_TEGRA=m -# CONFIG_MTD_NAND_GPIO is not set -# CONFIG_MTD_NAND_PLATFORM is not set - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -# CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# CONFIG_MTD_LPDDR2_NVM is not set -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -# CONFIG_SPI_CADENCE_QUADSPI is not set -# CONFIG_SPI_MTK_QUADSPI is not set -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_BLOCK=y -CONFIG_DTC=y -CONFIG_OF=y -# CONFIG_OF_UNITTEST is not set -CONFIG_OF_FLATTREE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_KOBJ=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_MDIO=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OF_RESOLVE=y -CONFIG_OF_OVERLAY=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -# CONFIG_PARPORT_PC is not set -# CONFIG_PARPORT_AX88796 is not set -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_CDROM=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=m -# CONFIG_VIRTIO_BLK_SCSI is not set -CONFIG_BLK_DEV_RBD=m -# CONFIG_BLK_DEV_RSXX is not set - -# -# NVME Support -# -CONFIG_NVME_CORE=y -CONFIG_BLK_DEV_NVME=y -# CONFIG_NVME_MULTIPATH is not set -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -# CONFIG_NVME_FC is not set -# CONFIG_NVME_TCP is not set -CONFIG_NVME_TARGET=m -# CONFIG_NVME_TARGET_LOOP is not set -CONFIG_NVME_TARGET_RDMA=m -# CONFIG_NVME_TARGET_FC is not set -# CONFIG_NVME_TARGET_TCP is not set -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -# CONFIG_DUMMY_IRQ is not set -# CONFIG_PHANTOM is not set -CONFIG_SGI_IOC4=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -# CONFIG_HP_ILO is not set -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -# CONFIG_USB_SWITCH_FSA9480 is not set -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_VEXPRESS_SYSCFG=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_MISC_RTSX=m -# CONFIG_PVPANIC is not set -CONFIG_C2PORT=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_EEPROM_IDT_89HPESX is not set -# CONFIG_EEPROM_EE1004 is not set -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -# CONFIG_SENSORS_LIS3_SPI is not set -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m - -# -# Intel MIC & related support -# - -# -# Intel MIC Bus Driver -# - -# -# SCIF Bus Driver -# - -# -# VOP Bus Driver -# -# CONFIG_VOP_BUS is not set - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# - -# -# SCIF Driver -# - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# - -# -# VOP Driver -# -# end of Intel MIC & related support - -# CONFIG_ECHO is not set -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -# CONFIG_HABANA_AI is not set -# end of Misc devices - -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -CONFIG_SCSI_HPSA=m -# CONFIG_SCSI_3W_9XXX is not set -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_ADVANSYS=m -# CONFIG_SCSI_ARCMSR is not set -CONFIG_SCSI_ESAS2R=m -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -# CONFIG_SCSI_UFSHCD_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_MYRB is not set -# CONFIG_SCSI_MYRS is not set -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_STEX=m -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_QEDI is not set -# CONFIG_QEDF is not set -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -# CONFIG_SCSI_DC395x is not set -CONFIG_SCSI_AM53C974=m -# CONFIG_SCSI_NSP32 is not set -CONFIG_SCSI_WD719X=m -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_ATA=m -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -# CONFIG_AHCI_DM816 is not set -CONFIG_AHCI_IMX=m -# CONFIG_AHCI_CEVA is not set -CONFIG_AHCI_MVEBU=m -CONFIG_AHCI_SUNXI=m -CONFIG_AHCI_TEGRA=m -# CONFIG_AHCI_QORIQ is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=m -# CONFIG_SATA_DWC is not set -CONFIG_SATA_HIGHBANK=m -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -CONFIG_PATA_ARTOP=m -# CONFIG_PATA_ATIIXP is not set -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -CONFIG_PATA_IMX=m -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -# CONFIG_PATA_NETCELL is not set -CONFIG_PATA_NINJA32=m -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -CONFIG_PATA_RDC=m -CONFIG_PATA_SCH=m -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -CONFIG_PATA_SIS=m -CONFIG_PATA_TOSHIBA=m -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -CONFIG_PATA_PLATFORM=m -CONFIG_PATA_OF_PLATFORM=m -# CONFIG_PATA_RZ1000 is not set - -# -# Generic fallback / legacy drivers -# -CONFIG_ATA_GENERIC=m -# CONFIG_PATA_LEGACY is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -# CONFIG_MD_CLUSTER is not set -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_UNSTRIPED=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -# CONFIG_DM_WRITECACHE is not set -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -# CONFIG_DM_INTEGRITY is not set -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -# CONFIG_FUSION_LOGGING is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_EQUALIZER=m -# CONFIG_NET_FC is not set -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -# CONFIG_IPVTAP is not set -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_TUN=m -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=m -CONFIG_NLMON=m -CONFIG_NET_VRF=m -# CONFIG_ARCNET is not set -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -CONFIG_ATM_NICSTAR=m -CONFIG_ATM_NICSTAR_USE_SUNI=y -CONFIG_ATM_NICSTAR_USE_IDT77105=y -# CONFIG_ATM_IDT77252 is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -# CONFIG_ATM_HE is not set -CONFIG_ATM_SOLOS=m - -# -# CAIF transport drivers -# - -# -# Distributed Switch Architecture drivers -# -CONFIG_B53=m -# CONFIG_B53_SPI_DRIVER is not set -CONFIG_B53_MDIO_DRIVER=m -# CONFIG_B53_MMAP_DRIVER is not set -# CONFIG_B53_SRAB_DRIVER is not set -# CONFIG_B53_SERDES is not set -CONFIG_NET_DSA_BCM_SF2=m -# CONFIG_NET_DSA_LOOP is not set -# CONFIG_NET_DSA_LANTIQ_GSWIP is not set -# CONFIG_NET_DSA_MT7530 is not set -CONFIG_NET_DSA_MV88E6060=m -# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_SJA1105=m -# CONFIG_NET_DSA_QCA8K is not set -CONFIG_NET_DSA_REALTEK_SMI=m -# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set -# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set -CONFIG_NET_DSA_VITESSE_VSC73XX=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -# CONFIG_SLICOSS is not set -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_SUN4I_EMAC=m -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_ALTERA_TSE is not set -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -# CONFIG_AMD8111_ETH is not set -CONFIG_PCNET32=m -CONFIG_NET_VENDOR_AQUANTIA=y -# CONFIG_NET_VENDOR_ARC is not set -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -# CONFIG_NET_VENDOR_AURORA is not set -CONFIG_NET_VENDOR_BROADCOM=y -# CONFIG_B44 is not set -# CONFIG_BCMGENET is not set -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -# CONFIG_MACB is not set -CONFIG_NET_CALXEDA_XGMAC=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CIRRUS=y -# CONFIG_CS89x0 is not set -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -CONFIG_NET_VENDOR_CORTINA=y -CONFIG_GEMINI_ETHERNET=m -# CONFIG_DM9000 is not set -# CONFIG_DNET is not set -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_FARADAY=y -# CONFIG_FTMAC100 is not set -# CONFIG_FTGMAC100 is not set -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=y -# CONFIG_FSL_PQ_MDIO is not set -# CONFIG_FSL_XGMAC_MDIO is not set -# CONFIG_GIANFAR is not set -CONFIG_NET_VENDOR_HISILICON=y -# CONFIG_HIX5HD2_GMAC is not set -# CONFIG_HISI_FEMAC is not set -# CONFIG_HIP04_ETH is not set -# CONFIG_HNS is not set -# CONFIG_HNS_DSAF is not set -# CONFIG_HNS_ENET is not set -# CONFIG_HNS3 is not set -CONFIG_NET_VENDOR_HP=y -# CONFIG_HP100 is not set -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBEVF=m -CONFIG_I40E=m -CONFIG_I40E_DCB=y -CONFIG_IAVF=m -CONFIG_I40EVF=m -# CONFIG_ICE is not set -# CONFIG_FM10K is not set -# CONFIG_IGC is not set -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -# CONFIG_MV643XX_ETH is not set -CONFIG_MVMDIO=m -# CONFIG_MVNETA_BM_ENABLE is not set -CONFIG_MVNETA=m -CONFIG_MVPP2=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -# CONFIG_MLXSW_CORE is not set -# CONFIG_MLXFW is not set -CONFIG_NET_VENDOR_MICREL=y -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_ENC28J60=m -# CONFIG_ENC28J60_WRITEVERIFY is not set -# CONFIG_ENCX24J600 is not set -# CONFIG_LAN743X is not set -CONFIG_NET_VENDOR_MICROSEMI=y -# CONFIG_MSCC_OCELOT_SWITCH is not set -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -# CONFIG_NFP_APP_FLOWER is not set -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -# CONFIG_NI_XGE_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_8390=y -# CONFIG_AX88796 is not set -CONFIG_NE2K_PCI=m -CONFIG_NET_VENDOR_NVIDIA=y -# CONFIG_FORCEDETH is not set -CONFIG_NET_VENDOR_OKI=y -# CONFIG_ETHOC is not set -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QEDE=m -CONFIG_NET_VENDOR_QUALCOMM=y -# CONFIG_QCA7000_SPI is not set -# CONFIG_QCOM_EMAC is not set -CONFIG_RMNET=m -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -# CONFIG_ROCKER is not set -CONFIG_NET_VENDOR_SAMSUNG=y -# CONFIG_SXGBE_ETH is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -# CONFIG_SIS900 is not set -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC91X=m -CONFIG_EPIC100=m -CONFIG_SMC911X=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -CONFIG_NET_VENDOR_SOCIONEXT=y -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -CONFIG_STMMAC_PLATFORM=m -# CONFIG_DWMAC_DWC_QOS_ETH is not set -CONFIG_DWMAC_GENERIC=m -CONFIG_DWMAC_ROCKCHIP=m -CONFIG_DWMAC_SOCFPGA=m -CONFIG_DWMAC_SUNXI=m -CONFIG_DWMAC_SUN8I=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -# CONFIG_DWC_XLGMAC is not set -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -CONFIG_TI_DAVINCI_EMAC=m -CONFIG_TI_DAVINCI_MDIO=m -CONFIG_TI_CPSW_PHY_SEL=y -CONFIG_TI_CPSW=m -# CONFIG_TI_CPTS is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -# CONFIG_VIA_RHINE is not set -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -# CONFIG_WIZNET_W5100 is not set -# CONFIG_WIZNET_W5300 is not set -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BCM_UNIMAC=m -# CONFIG_MDIO_BITBANG is not set -CONFIG_MDIO_BUS_MUX=m -# CONFIG_MDIO_BUS_MUX_GPIO is not set -# CONFIG_MDIO_BUS_MUX_MMIOREG is not set -# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set -# CONFIG_MDIO_HISI_FEMAC is not set -CONFIG_MDIO_I2C=m -# CONFIG_MDIO_MSCC_MIIM is not set -CONFIG_MDIO_SUN4I=y -CONFIG_PHYLINK=m -CONFIG_PHYLIB=y -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -CONFIG_SFP=m -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_CICADA_PHY=m -# CONFIG_CORTINA_PHY is not set -CONFIG_DAVICOM_PHY=m -CONFIG_DP83822_PHY=m -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_FIXED_PHY=y -CONFIG_ICPLUS_PHY=m -# CONFIG_INTEL_XWAY_PHY is not set -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -# CONFIG_MARVELL_10G_PHY is not set -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_RENESAS_PHY=m -CONFIG_ROCKCHIP_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -# CONFIG_XILINX_GMII2RGMII is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y - -# -# Host-side USB support is needed for USB Network Adapter support -# -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -# CONFIG_ATH9K_AHB is not set -# CONFIG_ATH9K_DEBUGFS is not set -# CONFIG_ATH9K_DYNACK is not set -# CONFIG_ATH9K_WOW is not set -CONFIG_ATH9K_RFKILL=y -# CONFIG_ATH9K_CHANNEL_CONTEXT is not set -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -# CONFIG_ATH9K_HWRNG is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -# CONFIG_CARL9170_HWRNG is not set -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -# CONFIG_ATH10K_AHB is not set -# CONFIG_ATH10K_SDIO is not set -CONFIG_ATH10K_USB=m -# CONFIG_ATH10K_DEBUG is not set -# CONFIG_ATH10K_DEBUGFS is not set -# CONFIG_ATH10K_TRACING is not set -# CONFIG_WCN36XX is not set -CONFIG_WLAN_VENDOR_ATMEL=y -# CONFIG_ATMEL is not set -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_SDIO=y -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -CONFIG_B43LEGACY_DEBUG=y -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -# CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_WLAN_VENDOR_INTEL=y -# CONFIG_IPW2100 is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -# CONFIG_IWLWIFI_DEVICE_TRACING is not set -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -# CONFIG_HERMES is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -# CONFIG_P54_SPI is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_SPI is not set -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -# CONFIG_MWIFIEX is not set -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -# CONFIG_RT2800USB_UNKNOWN is not set -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -# CONFIG_RTL8XXXU_UNTESTED is not set -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y -# CONFIG_RSI_SDIO is not set -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -# CONFIG_CW1200 is not set -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -# CONFIG_USB_ZD1201 is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -# CONFIG_QTNFMAC_PCIE is not set -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -# CONFIG_WAN is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not set -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -# CONFIG_IEEE802154_CA8210 is not set -# CONFIG_IEEE802154_MCR20A is not set -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=m -CONFIG_XEN_NETDEV_BACKEND=m -# CONFIG_VMXNET3 is not set -CONFIG_NETDEVSIM=m -CONFIG_NET_FAILOVER=m -# CONFIG_ISDN is not set -# CONFIG_NVM is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_APMPOWER is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ADC is not set -CONFIG_KEYBOARD_ADP5588=m -# CONFIG_KEYBOARD_ADP5589 is not set -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -# CONFIG_KEYBOARD_QT1070 is not set -CONFIG_KEYBOARD_QT2160=m -# CONFIG_KEYBOARD_DLINK_DIR685 is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_MATRIX is not set -CONFIG_KEYBOARD_LM8323=m -# CONFIG_KEYBOARD_LM8333 is not set -CONFIG_KEYBOARD_MAX7359=m -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -CONFIG_KEYBOARD_SNVS_PWRKEY=m -CONFIG_KEYBOARD_IMX=m -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_TEGRA=m -CONFIG_KEYBOARD_OPENCORES=m -# CONFIG_KEYBOARD_SAMSUNG is not set -CONFIG_KEYBOARD_STOWAWAY=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_STMPE is not set -CONFIG_KEYBOARD_SUN4I_LRADC=m -CONFIG_KEYBOARD_OMAP4=m -# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set -CONFIG_KEYBOARD_TWL4030=m -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_KEYBOARD_CROS_EC=m -# CONFIG_KEYBOARD_CAP11XX is not set -# CONFIG_KEYBOARD_BCM is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_SMBUS=y -# CONFIG_MOUSE_SERIAL is not set -CONFIG_MOUSE_APPLETOUCH=m -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_AD7877=m -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -# CONFIG_TOUCHSCREEN_AD7879_SPI is not set -CONFIG_TOUCHSCREEN_ADC=m -# CONFIG_TOUCHSCREEN_AR1021_I2C is not set -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set -# CONFIG_TOUCHSCREEN_BU21013 is not set -# CONFIG_TOUCHSCREEN_BU21029 is not set -# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set -# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set -# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set -# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set -# CONFIG_TOUCHSCREEN_DA9052 is not set -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -# CONFIG_TOUCHSCREEN_EETI is not set -# CONFIG_TOUCHSCREEN_EGALAX is not set -# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set -CONFIG_TOUCHSCREEN_EXC3000=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_HIDEEP=m -# CONFIG_TOUCHSCREEN_ILI210X is not set -CONFIG_TOUCHSCREEN_S6SY761=m -CONFIG_TOUCHSCREEN_GUNZE=m -# CONFIG_TOUCHSCREEN_EKTF2127 is not set -# CONFIG_TOUCHSCREEN_ELAN is not set -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -# CONFIG_TOUCHSCREEN_WACOM_I2C is not set -# CONFIG_TOUCHSCREEN_MAX11801 is not set -CONFIG_TOUCHSCREEN_MCS5000=m -# CONFIG_TOUCHSCREEN_MMS114 is not set -# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set -CONFIG_TOUCHSCREEN_MTOUCH=m -# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set -CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -# CONFIG_TOUCHSCREEN_PIXCIR is not set -# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -# CONFIG_TOUCHSCREEN_TS4800 is not set -# CONFIG_TOUCHSCREEN_TSC_SERIO is not set -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -# CONFIG_TOUCHSCREEN_TSC2004 is not set -CONFIG_TOUCHSCREEN_TSC2005=m -CONFIG_TOUCHSCREEN_TSC2007=m -# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set -# CONFIG_TOUCHSCREEN_RM_TS is not set -# CONFIG_TOUCHSCREEN_SILEAD is not set -# CONFIG_TOUCHSCREEN_SIS_I2C is not set -# CONFIG_TOUCHSCREEN_ST1232 is not set -# CONFIG_TOUCHSCREEN_STMFTS is not set -CONFIG_TOUCHSCREEN_STMPE=m -CONFIG_TOUCHSCREEN_SUN4I=m -CONFIG_TOUCHSCREEN_SUR40=m -# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set -# CONFIG_TOUCHSCREEN_SX8654 is not set -CONFIG_TOUCHSCREEN_TPS6507X=m -# CONFIG_TOUCHSCREEN_ZET6223 is not set -# CONFIG_TOUCHSCREEN_ZFORCE is not set -# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set -# CONFIG_TOUCHSCREEN_IQS5XX is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ATMEL_CAPTOUCH is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_E3X0_BUTTON is not set -# CONFIG_INPUT_MSM_VIBRATOR is not set -# CONFIG_INPUT_MC13783_PWRBUTTON is not set -CONFIG_INPUT_MMA8450=m -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_DECODER is not set -# CONFIG_INPUT_GPIO_VIBRA is not set -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -# CONFIG_INPUT_KXTJ9 is not set -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -# CONFIG_INPUT_REGULATOR_HAPTIC is not set -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_TWL4030_PWRBUTTON=m -CONFIG_INPUT_TWL4030_VIBRA=m -CONFIG_INPUT_TWL6040_VIBRA=m -CONFIG_INPUT_UINPUT=m -# CONFIG_INPUT_PALMAS_PWRBUTTON is not set -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_PWM_VIBRA is not set -CONFIG_INPUT_RK805_PWRKEY=m -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_DA9052_ONKEY is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_CMA3000 is not set -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set -# CONFIG_INPUT_DRV260X_HAPTICS is not set -# CONFIG_INPUT_DRV2665_HAPTICS is not set -# CONFIG_INPUT_DRV2667_HAPTICS is not set -CONFIG_RMI4_CORE=m -# CONFIG_RMI4_I2C is not set -# CONFIG_RMI4_SPI is not set -# CONFIG_RMI4_SMB is not set -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -# CONFIG_RMI4_F55 is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_AMBAKMI=m -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_ALTERA_PS2=m -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_SERIO_APBPS2 is not set -CONFIG_SERIO_SUN4I_PS2=m -CONFIG_SERIO_GPIO_PS2=m -# CONFIG_USERIO is not set -# CONFIG_GAMEPORT is not set -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_NOZOMI=m -CONFIG_N_GSM=m -# CONFIG_TRACE_SINK is not set -CONFIG_NULL_TTY=m -CONFIG_LDISC_AUTOLOAD=y -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SERIAL_8250_ASPEED_VUART is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_DW=y -# CONFIG_SERIAL_8250_EM is not set -# CONFIG_SERIAL_8250_RT288X is not set -# CONFIG_SERIAL_8250_OMAP is not set -CONFIG_SERIAL_8250_MOXA=m -CONFIG_SERIAL_OF_PLATFORM=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_UARTS_4=y -CONFIG_SERIAL_SAMSUNG_UARTS=4 -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_SERIAL_TEGRA=y -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_VT8500=y -CONFIG_SERIAL_VT8500_CONSOLE=y -CONFIG_SERIAL_OMAP=y -CONFIG_SERIAL_OMAP_CONSOLE=y -# CONFIG_SERIAL_SIFIVE is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_BCM63XX is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -CONFIG_SERIAL_ARC=y -CONFIG_SERIAL_ARC_CONSOLE=y -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -# CONFIG_SERIAL_FSL_LPUART is not set -# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set -# CONFIG_SERIAL_ST_ASC is not set -# CONFIG_SERIAL_MVEBU_UART is not set -# end of Serial drivers - -CONFIG_SERIAL_MCTRL_GPIO=y -# CONFIG_SERIAL_DEV_BUS is not set -CONFIG_TTY_PRINTK=m -CONFIG_TTY_PRINTK_LEVEL=6 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -# CONFIG_HVC_DCC is not set -CONFIG_VIRTIO_CONSOLE=m -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_BCM2835=m -CONFIG_HW_RANDOM_OMAP=m -CONFIG_HW_RANDOM_OMAP3_ROM=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_IMX_RNGC=m -CONFIG_HW_RANDOM_EXYNOS=m -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_TCG_TPM=y -# CONFIG_TCG_TIS is not set -# CONFIG_TCG_TIS_SPI is not set -# CONFIG_TCG_TIS_I2C_ATMEL is not set -# CONFIG_TCG_TIS_I2C_INFINEON is not set -# CONFIG_TCG_TIS_I2C_NUVOTON is not set -# CONFIG_TCG_XEN is not set -# CONFIG_TCG_VTPM_PROXY is not set -# CONFIG_TCG_TIS_ST33ZP24_I2C is not set -# CONFIG_TCG_TIS_ST33ZP24_SPI is not set -CONFIG_DEVPORT=y -# CONFIG_XILLYBUS is not set -# end of Character devices - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_MUX=y - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_ARB_GPIO_CHALLENGE=m -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_GPMUX is not set -# CONFIG_I2C_MUX_LTC4306 is not set -# CONFIG_I2C_MUX_PCA9541 is not set -CONFIG_I2C_MUX_PCA954x=m -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_MUX_REG is not set -# CONFIG_I2C_DEMUX_PINCTRL is not set -# CONFIG_I2C_MUX_MLXCPLD is not set -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -CONFIG_I2C_ISCH=m -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_NVIDIA_GPU is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_ALTERA=m -CONFIG_I2C_BCM2835=m -# CONFIG_I2C_CBUS_GPIO is not set -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_EMEV2 is not set -CONFIG_I2C_EXYNOS5=m -CONFIG_I2C_GPIO=y -# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set -CONFIG_I2C_IMX=m -# CONFIG_I2C_IMX_LPI2C is not set -CONFIG_I2C_MV64XXX=m -# CONFIG_I2C_NOMADIK is not set -CONFIG_I2C_OCORES=m -CONFIG_I2C_OMAP=y -CONFIG_I2C_PCA_PLATFORM=m -# CONFIG_I2C_PXA is not set -CONFIG_I2C_RK3X=m -CONFIG_HAVE_S3C2410_I2C=y -CONFIG_I2C_S3C2410=y -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_SUN6I_P2WI=m -CONFIG_I2C_TEGRA=y -CONFIG_I2C_VERSATILE=m -# CONFIG_I2C_WMT is not set -# CONFIG_I2C_XILINX is not set - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_CROS_EC_TUNNEL=m -# end of I2C Hardware Bus support - -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_SLAVE is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -# CONFIG_I3C is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_ALTERA is not set -# CONFIG_SPI_ARMADA_3700 is not set -# CONFIG_SPI_AXI_SPI_ENGINE is not set -CONFIG_SPI_BCM2835=m -CONFIG_SPI_BCM2835AUX=m -# CONFIG_SPI_BCM_QSPI is not set -CONFIG_SPI_BITBANG=y -CONFIG_SPI_BUTTERFLY=m -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_DESIGNWARE is not set -# CONFIG_SPI_FSL_LPSPI is not set -# CONFIG_SPI_FSL_QUADSPI is not set -# CONFIG_SPI_NXP_FLEXSPI is not set -CONFIG_SPI_GPIO=y -CONFIG_SPI_IMX=m -CONFIG_SPI_LM70_LLP=m -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_OC_TINY is not set -CONFIG_SPI_OMAP24XX=m -CONFIG_SPI_TI_QSPI=m -CONFIG_SPI_ORION=m -CONFIG_SPI_PL022=m -# CONFIG_SPI_PXA2XX is not set -CONFIG_SPI_ROCKCHIP=m -# CONFIG_SPI_S3C64XX is not set -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_SIFIVE is not set -CONFIG_SPI_SUN4I=m -CONFIG_SPI_SUN6I=m -CONFIG_SPI_MXIC=m -CONFIG_SPI_TEGRA114=m -CONFIG_SPI_TEGRA20_SFLASH=m -# CONFIG_SPI_TEGRA20_SLINK is not set -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_ZYNQMP_GQSPI is not set - -# -# SPI Protocol Masters -# -CONFIG_SPI_SPIDEV=y -# CONFIG_SPI_LOOPBACK_TEST is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPI_SLAVE is not set -# CONFIG_SPMI is not set -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# -CONFIG_OMAP_SSI=m - -# -# HSI clients -# -CONFIG_NOKIA_MODEM=m -CONFIG_CMT_SPEECH=m -CONFIG_SSI_PROTOCOL=m -# CONFIG_HSI_CHAR is not set -CONFIG_PPS=y -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -# CONFIG_PPS_CLIENT_GPIO is not set - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=y - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_PINMUX=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AS3722=y -CONFIG_PINCTRL_AXP209=m -# CONFIG_PINCTRL_AMD is not set -CONFIG_PINCTRL_MCP23S08=m -CONFIG_PINCTRL_ROCKCHIP=y -CONFIG_PINCTRL_SINGLE=y -# CONFIG_PINCTRL_SX150X is not set -# CONFIG_PINCTRL_STMFX is not set -CONFIG_PINCTRL_PALMAS=y -CONFIG_PINCTRL_RK805=m -# CONFIG_PINCTRL_OCELOT is not set -CONFIG_PINCTRL_BCM2835=y -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX51=y -CONFIG_PINCTRL_IMX53=y -CONFIG_PINCTRL_IMX6Q=y -CONFIG_PINCTRL_MVEBU=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_375=y -CONFIG_PINCTRL_ARMADA_38X=y -CONFIG_PINCTRL_ARMADA_39X=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_SAMSUNG=y -CONFIG_PINCTRL_EXYNOS=y -CONFIG_PINCTRL_EXYNOS_ARM=y -CONFIG_PINCTRL_SUNXI=y -CONFIG_PINCTRL_SUN4I_A10=y -CONFIG_PINCTRL_SUN5I=y -CONFIG_PINCTRL_SUN6I_A31=y -CONFIG_PINCTRL_SUN6I_A31_R=y -CONFIG_PINCTRL_SUN8I_A23=y -CONFIG_PINCTRL_SUN8I_A33=y -CONFIG_PINCTRL_SUN8I_A83T=y -CONFIG_PINCTRL_SUN8I_A83T_R=y -CONFIG_PINCTRL_SUN8I_A23_R=y -CONFIG_PINCTRL_SUN8I_H3=y -CONFIG_PINCTRL_SUN8I_H3_R=y -CONFIG_PINCTRL_SUN8I_V3S=y -CONFIG_PINCTRL_SUN9I_A80=y -CONFIG_PINCTRL_SUN9I_A80_R=y -# CONFIG_PINCTRL_SUN50I_A64 is not set -# CONFIG_PINCTRL_SUN50I_A64_R is not set -# CONFIG_PINCTRL_SUN50I_H5 is not set -# CONFIG_PINCTRL_SUN50I_H6 is not set -# CONFIG_PINCTRL_SUN50I_H6_R is not set -CONFIG_PINCTRL_TEGRA=y -CONFIG_PINCTRL_TEGRA124=y -CONFIG_PINCTRL_TEGRA_XUSB=y -CONFIG_PINCTRL_TI_IODELAY=y -CONFIG_PINCTRL_WMT=y -CONFIG_PINCTRL_WM8850=y -CONFIG_PINCTRL_MADERA=m -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_OF_GPIO=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=y - -# -# Memory mapped GPIO drivers -# -# CONFIG_GPIO_74XX_MMIO is not set -# CONFIG_GPIO_ALTERA is not set -CONFIG_GPIO_RASPBERRYPI_EXP=m -CONFIG_GPIO_CADENCE=m -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EXAR is not set -# CONFIG_GPIO_FTGPIO010 is not set -CONFIG_GPIO_GENERIC_PLATFORM=y -# CONFIG_GPIO_GRGPIO is not set -# CONFIG_GPIO_HLWD is not set -CONFIG_GPIO_MB86S7X=m -# CONFIG_GPIO_MPC8XXX is not set -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_MXC=y -CONFIG_GPIO_OMAP=y -CONFIG_GPIO_PL061=y -# CONFIG_GPIO_SAMA5D2_PIOBU is not set -# CONFIG_GPIO_SYSCON is not set -CONFIG_GPIO_TEGRA=y -# CONFIG_GPIO_TS4800 is not set -# CONFIG_GPIO_XILINX is not set -# CONFIG_GPIO_ZEVIO is not set -# CONFIG_GPIO_AMD_FCH is not set -# end of Memory mapped GPIO drivers - -# -# I2C GPIO expanders -# -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ADNP is not set -# CONFIG_GPIO_GW_PLD is not set -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m -# CONFIG_GPIO_TPIC2810 is not set -# CONFIG_GPIO_TS4900 is not set -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_BD9571MWV=m -CONFIG_GPIO_DA9052=m -# CONFIG_HTC_EGPIO is not set -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_PALMAS=y -# CONFIG_GPIO_STMPE is not set -CONFIG_GPIO_TWL4030=y -CONFIG_GPIO_TWL6040=y -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -# CONFIG_GPIO_PCI_IDIO_16 is not set -# CONFIG_GPIO_PCIE_IDIO_24 is not set -# CONFIG_GPIO_RDC321X is not set -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -# CONFIG_GPIO_74X164 is not set -CONFIG_GPIO_MAX3191X=m -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_PISOSR is not set -# CONFIG_GPIO_XRA1403 is not set -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -# CONFIG_W1_MASTER_MATROX is not set -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -# CONFIG_W1_MASTER_MXC is not set -# CONFIG_W1_MASTER_DS1WM is not set -CONFIG_W1_MASTER_GPIO=m -CONFIG_HDQ_MASTER_OMAP=m -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -# CONFIG_W1_SLAVE_DS2405 is not set -# CONFIG_W1_SLAVE_DS2408 is not set -# CONFIG_W1_SLAVE_DS2413 is not set -# CONFIG_W1_SLAVE_DS2406 is not set -# CONFIG_W1_SLAVE_DS2423 is not set -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -# CONFIG_W1_SLAVE_DS2438 is not set -# CONFIG_W1_SLAVE_DS2780 is not set -# CONFIG_W1_SLAVE_DS2781 is not set -# CONFIG_W1_SLAVE_DS28E04 is not set -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_ROCKCHIP_IODOMAIN=m -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_AS3722=y -# CONFIG_POWER_RESET_BRCMKONA is not set -# CONFIG_POWER_RESET_BRCMSTB is not set -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y -# CONFIG_POWER_RESET_LTC2952 is not set -# CONFIG_POWER_RESET_QNAP is not set -CONFIG_POWER_RESET_RESTART=y -# CONFIG_POWER_RESET_VERSATILE is not set -CONFIG_POWER_RESET_VEXPRESS=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_RESET_SYSCON_POWEROFF=y -# CONFIG_SYSCON_REBOOT_MODE is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_APM_POWER is not set -# CONFIG_GENERIC_ADC_BATTERY is not set -# CONFIG_TEST_POWER is not set -CONFIG_CHARGER_ADP5061=m -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2781 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_LEGO_EV3 is not set -CONFIG_BATTERY_SBS=m -# CONFIG_CHARGER_SBS is not set -CONFIG_MANAGER_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=m -CONFIG_BATTERY_BQ27XXX_HDQ=m -# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set -# CONFIG_BATTERY_DA9052 is not set -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_FUEL_GAUGE=m -# CONFIG_BATTERY_MAX17040 is not set -# CONFIG_BATTERY_MAX17042 is not set -CONFIG_BATTERY_MAX1721X=m -CONFIG_BATTERY_TWL4030_MADC=m -CONFIG_BATTERY_RX51=m -CONFIG_CHARGER_ISP1704=m -# CONFIG_CHARGER_MAX8903 is not set -CONFIG_CHARGER_TWL4030=m -# CONFIG_CHARGER_LP8727 is not set -CONFIG_CHARGER_GPIO=m -# CONFIG_CHARGER_MANAGER is not set -# CONFIG_CHARGER_LT3651 is not set -# CONFIG_CHARGER_DETECTOR_MAX14656 is not set -CONFIG_CHARGER_BQ2415X=m -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_BQ24257 is not set -# CONFIG_CHARGER_BQ24735 is not set -# CONFIG_CHARGER_BQ25890 is not set -# CONFIG_CHARGER_SMB347 is not set -# CONFIG_BATTERY_GAUGE_LTC2941 is not set -# CONFIG_CHARGER_RT9455 is not set -CONFIG_CHARGER_CROS_USBPD=m -# CONFIG_CHARGER_UCS1002 is not set -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -# CONFIG_SENSORS_AD7314 is not set -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -CONFIG_SENSORS_ADM1029=m -# CONFIG_SENSORS_ADM1031 is not set -CONFIG_SENSORS_ADM9240=m -# CONFIG_SENSORS_ADT7310 is not set -# CONFIG_SENSORS_ADT7410 is not set -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_ARM_SCMI=m -# CONFIG_SENSORS_ASPEED is not set -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DS620=m -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_DA9052_ADC is not set -CONFIG_SENSORS_I5K_AMB=m -# CONFIG_SENSORS_F71805F is not set -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FTSTEUTATES=m -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m -# CONFIG_SENSORS_HIH6130 is not set -# CONFIG_SENSORS_IIO_HWMON is not set -# CONFIG_SENSORS_IT87 is not set -CONFIG_SENSORS_JC42=m -# CONFIG_SENSORS_POWR1220 is not set -CONFIG_SENSORS_LINEAGE=m -# CONFIG_SENSORS_LTC2945 is not set -# CONFIG_SENSORS_LTC2990 is not set -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -# CONFIG_SENSORS_LTC4222 is not set -CONFIG_SENSORS_LTC4245=m -# CONFIG_SENSORS_LTC4260 is not set -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -# CONFIG_SENSORS_MAX1619 is not set -CONFIG_SENSORS_MAX1668=m -# CONFIG_SENSORS_MAX197 is not set -# CONFIG_SENSORS_MAX31722 is not set -CONFIG_SENSORS_MAX6621=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -# CONFIG_SENSORS_MAX6697 is not set -# CONFIG_SENSORS_MAX31790 is not set -# CONFIG_SENSORS_MCP3021 is not set -# CONFIG_SENSORS_TC654 is not set -CONFIG_SENSORS_ADCXX=m -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -CONFIG_SENSORS_LM93=m -# CONFIG_SENSORS_LM95234 is not set -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -# CONFIG_SENSORS_PC87360 is not set -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -# CONFIG_SENSORS_NCT7802 is not set -# CONFIG_SENSORS_NCT7904 is not set -# CONFIG_SENSORS_NPCM7XX is not set -# CONFIG_SENSORS_OCC_P8_I2C is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_PMBUS is not set -CONFIG_SENSORS_PWM_FAN=m -CONFIG_SENSORS_RASPBERRYPI_HWMON=m -# CONFIG_SENSORS_SHT15 is not set -CONFIG_SENSORS_SHT21=m -# CONFIG_SENSORS_SHT3x is not set -# CONFIG_SENSORS_SHTC1 is not set -# CONFIG_SENSORS_SIS5595 is not set -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -# CONFIG_SENSORS_SMSC47M1 is not set -CONFIG_SENSORS_SMSC47M192=m -# CONFIG_SENSORS_SMSC47B397 is not set -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -# CONFIG_SENSORS_SCH5636 is not set -# CONFIG_SENSORS_STTS751 is not set -CONFIG_SENSORS_SMM665=m -# CONFIG_SENSORS_ADC128D818 is not set -CONFIG_SENSORS_ADS1015=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -# CONFIG_SENSORS_INA209 is not set -# CONFIG_SENSORS_INA2XX is not set -# CONFIG_SENSORS_INA3221 is not set -# CONFIG_SENSORS_TC74 is not set -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -# CONFIG_SENSORS_TMP103 is not set -# CONFIG_SENSORS_TMP108 is not set -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -# CONFIG_SENSORS_VEXPRESS is not set -# CONFIG_SENSORS_VIA686A is not set -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83773G=m -# CONFIG_SENSORS_W83781D is not set -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -# CONFIG_SENSORS_W83L785TS is not set -CONFIG_SENSORS_W83L786NG=m -# CONFIG_SENSORS_W83627HF is not set -CONFIG_SENSORS_W83627EHF=m -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THERMAL_WRITABLE_TRIPS is not set -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -# CONFIG_THERMAL_GOV_BANG_BANG is not set -# CONFIG_THERMAL_GOV_USER_SPACE is not set -# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -CONFIG_CPU_THERMAL=y -# CONFIG_CLOCK_THERMAL is not set -# CONFIG_DEVFREQ_THERMAL is not set -# CONFIG_THERMAL_EMULATION is not set -# CONFIG_THERMAL_MMIO is not set -# CONFIG_IMX_THERMAL is not set -# CONFIG_QORIQ_THERMAL is not set -CONFIG_ROCKCHIP_THERMAL=m -CONFIG_ARMADA_THERMAL=y - -# -# Broadcom thermal drivers -# -CONFIG_BCM2835_THERMAL=m -# end of Broadcom thermal drivers - -# -# Texas Instruments thermal drivers -# -CONFIG_TI_SOC_THERMAL=m -CONFIG_TI_THERMAL=y -# CONFIG_OMAP3_THERMAL is not set -CONFIG_OMAP4_THERMAL=y -CONFIG_OMAP5_THERMAL=y -CONFIG_DRA752_THERMAL=y -# end of Texas Instruments thermal drivers - -# -# Samsung thermal drivers -# -CONFIG_EXYNOS_THERMAL=y -# end of Samsung thermal drivers - -# -# NVIDIA Tegra thermal drivers -# -CONFIG_TEGRA_SOCTHERM=y -# end of NVIDIA Tegra thermal drivers - -# CONFIG_GENERIC_ADC_THERMAL is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_DA9052_WATCHDOG=m -# CONFIG_GPIO_WATCHDOG is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_ZIIRAVE_WATCHDOG is not set -CONFIG_ARM_SP805_WATCHDOG=m -# CONFIG_ARMADA_37XX_WATCHDOG is not set -# CONFIG_CADENCE_WATCHDOG is not set -CONFIG_FTWDT010_WATCHDOG=m -CONFIG_HAVE_S3C2410_WATCHDOG=y -CONFIG_S3C2410_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_OMAP_WATCHDOG=m -CONFIG_ORION_WATCHDOG=m -CONFIG_SUNXI_WATCHDOG=m -CONFIG_TWL4030_WATCHDOG=m -# CONFIG_TS4800_WATCHDOG is not set -# CONFIG_MAX63XX_WATCHDOG is not set -CONFIG_IMX2_WDT=m -CONFIG_IMX_SC_WDT=m -CONFIG_TEGRA_WATCHDOG=m -# CONFIG_ALIM7101_WDT is not set -# CONFIG_I6300ESB_WDT is not set -CONFIG_BCM2835_WDT=m -# CONFIG_MEN_A21_WDT is not set -CONFIG_XEN_WDT=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -# CONFIG_SSB_DRIVER_GPIO is not set -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -# CONFIG_BCMA_HOST_SOC is not set -CONFIG_BCMA_DRIVER_PCI=y -# CONFIG_BCMA_DRIVER_GMAC_CMN is not set -# CONFIG_BCMA_DRIVER_GPIO is not set -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -# CONFIG_MFD_ALTERA_A10SR is not set -# CONFIG_MFD_ALTERA_SYSMGR is not set -# CONFIG_MFD_ACT8945A is not set -# CONFIG_MFD_SUN4I_GPADC is not set -# CONFIG_MFD_AS3711 is not set -CONFIG_MFD_AS3722=y -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_ATMEL_FLEXCOM is not set -# CONFIG_MFD_ATMEL_HLCDC is not set -# CONFIG_MFD_BCM590XX is not set -CONFIG_MFD_BD9571MWV=m -# CONFIG_MFD_AC100 is not set -CONFIG_MFD_AXP20X=y -CONFIG_MFD_AXP20X_I2C=y -# CONFIG_MFD_AXP20X_RSB is not set -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_CHARDEV=m -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_PMIC_DA903X is not set -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9052_I2C=y -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9062 is not set -# CONFIG_MFD_DA9063 is not set -# CONFIG_MFD_DA9150 is not set -# CONFIG_MFD_DLN2 is not set -# CONFIG_MFD_EXYNOS_LPASS is not set -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_SPI=m -CONFIG_MFD_MC13XXX_I2C=m -# CONFIG_MFD_HI6421_PMIC is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_LPC_ICH is not set -CONFIG_LPC_SCH=m -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set -# CONFIG_MFD_MAX77620 is not set -# CONFIG_MFD_MAX77650 is not set -CONFIG_MFD_MAX77686=y -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX77843 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_MFD_MT6397 is not set -# CONFIG_MFD_MENF21BMC is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_MFD_CPCAP is not set -CONFIG_MFD_VIPERBOARD=m -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_UCB1400_CORE is not set -# CONFIG_MFD_PM8XXX is not set -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RT5033 is not set -# CONFIG_MFD_RC5T583 is not set -CONFIG_MFD_RK808=y -# CONFIG_MFD_RN5T618 is not set -CONFIG_MFD_SEC_CORE=y -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SKY81452 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_ABX500_CORE is not set -CONFIG_MFD_STMPE=y - -# -# STMicroelectronics STMPE Interface Drivers -# -CONFIG_STMPE_I2C=y -# CONFIG_STMPE_SPI is not set -# end of STMicroelectronics STMPE Interface Drivers - -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_TI_LMU is not set -CONFIG_MFD_OMAP_USB_HOST=y -CONFIG_MFD_PALMAS=y -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65086 is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TI_LP873X is not set -# CONFIG_MFD_TI_LP87565 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_MFD_TWL4030_AUDIO=y -CONFIG_TWL6040_CORE=y -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_MFD_TQMX86 is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_LOCHNAGAR is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set -CONFIG_MFD_ROHM_BD718XX=m -# CONFIG_MFD_STPMIC1 is not set -# CONFIG_MFD_STMFX is not set -CONFIG_MFD_VEXPRESS_SYSREG=y -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_88PG86X is not set -CONFIG_REGULATOR_ACT8865=m -# CONFIG_REGULATOR_AD5398 is not set -CONFIG_REGULATOR_ANATOP=m -CONFIG_REGULATOR_AS3722=y -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BD718XX=m -CONFIG_REGULATOR_BD9571MWV=m -CONFIG_REGULATOR_DA9052=m -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_DA9211 is not set -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -# CONFIG_REGULATOR_ISL9305 is not set -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_LTC3676 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -CONFIG_REGULATOR_MAX77686=m -# CONFIG_REGULATOR_MAX77802 is not set -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -# CONFIG_REGULATOR_MCP16502 is not set -# CONFIG_REGULATOR_MT6311 is not set -CONFIG_REGULATOR_PALMAS=y -CONFIG_REGULATOR_PBIAS=m -CONFIG_REGULATOR_PFUZE100=m -# CONFIG_REGULATOR_PV88060 is not set -# CONFIG_REGULATOR_PV88080 is not set -# CONFIG_REGULATOR_PV88090 is not set -# CONFIG_REGULATOR_PWM is not set -CONFIG_REGULATOR_RK808=m -CONFIG_REGULATOR_S2MPA01=m -CONFIG_REGULATOR_S2MPS11=m -CONFIG_REGULATOR_S5M8767=m -CONFIG_REGULATOR_TI_ABB=m -CONFIG_REGULATOR_SY8106A=m -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS65132 is not set -# CONFIG_REGULATOR_TPS6524X is not set -CONFIG_REGULATOR_TWL4030=y -# CONFIG_REGULATOR_VCTRL is not set -CONFIG_REGULATOR_VEXPRESS=m -CONFIG_CEC_CORE=m -CONFIG_CEC_NOTIFIER=y -CONFIG_RC_CORE=y -CONFIG_RC_MAP=m -CONFIG_LIRC=y -# CONFIG_BPF_LIRC_MODE2 is not set -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -# CONFIG_IR_HIX5HD2 is not set -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_REDRAT3=m -# CONFIG_IR_SPI is not set -CONFIG_IR_STREAMZAP=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -# CONFIG_IR_RX51 is not set -CONFIG_RC_LOOPBACK=m -CONFIG_IR_GPIO_CIR=m -CONFIG_IR_GPIO_TX=m -CONFIG_IR_PWM_TX=m -CONFIG_IR_SUNXI=m -# CONFIG_IR_SERIAL is not set -# CONFIG_IR_SIR is not set -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=y - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=y -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -# CONFIG_VIDEO_TM6000 is not set - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -# CONFIG_DVB_USB_ZD1301 is not set -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -# CONFIG_VIDEO_CX25821 is not set -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -# CONFIG_VIDEO_SAA7134_GO7007 is not set -CONFIG_VIDEO_SAA7164=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_CADENCE=y -CONFIG_VIDEO_CADENCE_CSI2RX=m -CONFIG_VIDEO_CADENCE_CSI2TX=m -CONFIG_VIDEO_ASPEED=m -# CONFIG_VIDEO_MUX is not set -CONFIG_VIDEO_OMAP3=m -# CONFIG_VIDEO_OMAP3_DEBUG is not set -# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set -# CONFIG_VIDEO_XILINX is not set -CONFIG_VIDEO_SUN6I_CSI=m -# CONFIG_VIDEO_TI_CAL is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -# CONFIG_VIDEO_CODA is not set -CONFIG_VIDEO_IMX_PXP=m -# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set -# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set -# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set -# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set -# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set -# CONFIG_VIDEO_SH_VEU is not set -CONFIG_VIDEO_ROCKCHIP_RGA=m -CONFIG_VIDEO_TI_VPE=m -# CONFIG_VIDEO_TI_VPE_DEBUG is not set -CONFIG_VIDEO_TI_VPDMA=m -CONFIG_VIDEO_TI_SC=m -CONFIG_VIDEO_TI_CSC=m -CONFIG_V4L_TEST_DRIVERS=y -# CONFIG_VIDEO_VIMC is not set -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -# CONFIG_VIDEO_VIM2M is not set -# CONFIG_VIDEO_VICODEC is not set -# CONFIG_DVB_PLATFORM_DRIVERS is not set -# CONFIG_CEC_PLATFORM_DRIVERS is not set -# CONFIG_SDR_PLATFORM_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=y -CONFIG_USB_SI470X=m -# CONFIG_I2C_SI470X is not set -CONFIG_RADIO_SI4713=m -# CONFIG_USB_SI4713 is not set -# CONFIG_PLATFORM_SI4713 is not set -CONFIG_I2C_SI4713=m -CONFIG_USB_MR800=m -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_MAXIRADIO is not set -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -# CONFIG_RADIO_TEA5764 is not set -# CONFIG_RADIO_SAA7706H is not set -# CONFIG_RADIO_TEF6862 is not set -# CONFIG_RADIO_WL1273 is not set - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m -# end of Texas Instruments WL128x FM driver (ST based) - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -# CONFIG_SMS_SIANO_DEBUGFS is not set -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=y - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_MT9V011=m - -# -# Lens drivers -# - -# -# Flash devices -# - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_M52790=m - -# -# Media SPI Adapters -# -# CONFIG_CXD2880_SPI_DRV is not set -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=y -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA827X=y -CONFIG_MEDIA_TUNER_TDA18271=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_XC4000=y -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_GP8PSK_FE=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -# CONFIG_TEGRA_HOST1X is not set -CONFIG_IMX_IPUV3_CORE=m -CONFIG_DRM=m -CONFIG_DRM_MIPI_DSI=y -# CONFIG_DRM_DP_AUX_CHARDEV is not set -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_VM=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_I2C_NXP_TDA9950=m -# end of I2C encoder or helper chips - -# -# ARM devices -# -# CONFIG_DRM_HDLCD is not set -# CONFIG_DRM_MALI_DISPLAY is not set -# CONFIG_DRM_KOMEDA is not set -# end of ARM devices - -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_AMDGPU is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# end of ACP (Audio CoProcessor) Configuration - -# CONFIG_DRM_NOUVEAU is not set -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_ATI_PCIGART=y -CONFIG_DRM_EXYNOS=m - -# -# CRTCs -# -CONFIG_DRM_EXYNOS_FIMD=y -# CONFIG_DRM_EXYNOS5433_DECON is not set -# CONFIG_DRM_EXYNOS7_DECON is not set -CONFIG_DRM_EXYNOS_MIXER=y -# CONFIG_DRM_EXYNOS_VIDI is not set - -# -# Encoders and Bridges -# -# CONFIG_DRM_EXYNOS_DPI is not set -CONFIG_DRM_EXYNOS_DSI=y -CONFIG_DRM_EXYNOS_DP=y -CONFIG_DRM_EXYNOS_HDMI=y - -# -# Sub-drivers -# -# CONFIG_DRM_EXYNOS_G2D is not set -# CONFIG_DRM_EXYNOS_FIMC is not set -# CONFIG_DRM_EXYNOS_ROTATOR is not set -# CONFIG_DRM_EXYNOS_SCALER is not set -# CONFIG_DRM_EXYNOS_GSC is not set -CONFIG_DRM_ROCKCHIP=m -CONFIG_ROCKCHIP_ANALOGIX_DP=y -# CONFIG_ROCKCHIP_CDN_DP is not set -CONFIG_ROCKCHIP_DW_HDMI=y -CONFIG_ROCKCHIP_DW_MIPI_DSI=y -# CONFIG_ROCKCHIP_INNO_HDMI is not set -# CONFIG_ROCKCHIP_LVDS is not set -# CONFIG_ROCKCHIP_RGB is not set -CONFIG_ROCKCHIP_RK3066_HDMI=y -CONFIG_DRM_UDL=m -# CONFIG_DRM_AST is not set -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -# CONFIG_DRM_ARMADA is not set -# CONFIG_DRM_RCAR_DW_HDMI is not set -# CONFIG_DRM_RCAR_LVDS is not set -# CONFIG_DRM_SUN4I is not set -CONFIG_DRM_OMAP=m -CONFIG_OMAP2_DSS_INIT=y -CONFIG_OMAP_DSS_BASE=m -CONFIG_OMAP2_DSS=m -# CONFIG_OMAP2_DSS_DEBUG is not set -# CONFIG_OMAP2_DSS_DEBUGFS is not set -CONFIG_OMAP2_DSS_DPI=y -CONFIG_OMAP2_DSS_VENC=y -CONFIG_OMAP2_DSS_HDMI_COMMON=y -CONFIG_OMAP4_DSS_HDMI=y -CONFIG_OMAP4_DSS_HDMI_CEC=y -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y -CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 -CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y - -# -# OMAPDRM External Display Device Drivers -# -# CONFIG_DRM_OMAP_ENCODER_OPA362 is not set -CONFIG_DRM_OMAP_ENCODER_TPD12S015=m -CONFIG_DRM_OMAP_CONNECTOR_HDMI=m -CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m -# CONFIG_DRM_OMAP_PANEL_DSI_CM is not set -CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m -# CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02 is not set -# CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01 is not set -CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m -CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m -# CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11 is not set -# end of OMAPDRM External Display Device Drivers - -CONFIG_DRM_TILCDC=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_MSM=m -CONFIG_DRM_MSM_GPU_STATE=y -# CONFIG_DRM_MSM_REGISTER_LOGGING is not set -# CONFIG_DRM_MSM_GPU_SUDO is not set -CONFIG_DRM_MSM_DSI=y -CONFIG_DRM_MSM_DSI_PLL=y -CONFIG_DRM_MSM_DSI_28NM_PHY=y -CONFIG_DRM_MSM_DSI_20NM_PHY=y -CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y -CONFIG_DRM_MSM_DSI_14NM_PHY=y -CONFIG_DRM_MSM_DSI_10NM_PHY=y -# CONFIG_DRM_FSL_DCU is not set -# CONFIG_DRM_TEGRA is not set -# CONFIG_DRM_STM is not set -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_PANEL_ARM_VERSATILE=m -# CONFIG_DRM_PANEL_LVDS is not set -CONFIG_DRM_PANEL_SIMPLE=m -# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set -CONFIG_DRM_PANEL_ILITEK_IL9322=m -CONFIG_DRM_PANEL_ILITEK_ILI9881C=m -# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set -# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set -# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set -# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set -# CONFIG_DRM_PANEL_LG_LG4573 is not set -# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set -# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set -# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set -CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m -# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set -# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set -# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set -# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set -# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set -# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set -# CONFIG_DRM_PANEL_TPO_TPG110 is not set -# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -# CONFIG_DRM_ANALOGIX_ANX78XX is not set -CONFIG_DRM_CDNS_DSI=m -# CONFIG_DRM_DUMB_VGA_DAC is not set -# CONFIG_DRM_LVDS_ENCODER is not set -# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set -# CONFIG_DRM_NXP_PTN3460 is not set -# CONFIG_DRM_PARADE_PS8622 is not set -# CONFIG_DRM_SIL_SII8620 is not set -# CONFIG_DRM_SII902X is not set -# CONFIG_DRM_SII9234 is not set -# CONFIG_DRM_THINE_THC63LVD1024 is not set -# CONFIG_DRM_TOSHIBA_TC358764 is not set -# CONFIG_DRM_TOSHIBA_TC358767 is not set -# CONFIG_DRM_TI_TFP410 is not set -# CONFIG_DRM_TI_SN65DSI86 is not set -CONFIG_DRM_ANALOGIX_DP=m -# CONFIG_DRM_I2C_ADV7511 is not set -CONFIG_DRM_DW_HDMI=m -# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set -# CONFIG_DRM_DW_HDMI_I2S_AUDIO is not set -CONFIG_DRM_DW_HDMI_CEC=m -CONFIG_DRM_DW_MIPI_DSI=m -# end of Display Interface Bridges - -# CONFIG_DRM_STI is not set -CONFIG_DRM_IMX=m -# CONFIG_DRM_IMX_PARALLEL_DISPLAY is not set -# CONFIG_DRM_IMX_TVE is not set -CONFIG_DRM_IMX_LDB=m -CONFIG_DRM_IMX_HDMI=m -CONFIG_DRM_V3D=m -CONFIG_DRM_VC4=m -# CONFIG_DRM_VC4_HDMI_CEC is not set -CONFIG_DRM_ETNAVIV=m -CONFIG_DRM_ETNAVIV_THERMAL=y -# CONFIG_DRM_ARCPGU is not set -# CONFIG_DRM_HISI_HIBMC is not set -# CONFIG_DRM_MXSFB is not set -# CONFIG_DRM_TINYDRM is not set -# CONFIG_DRM_PL111 is not set -# CONFIG_DRM_TVE200 is not set -# CONFIG_DRM_XEN is not set -CONFIG_DRM_LIMA=m -CONFIG_DRM_PANFROST=m -CONFIG_DRM_LEGACY=y -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_MGA is not set -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_SVGALIB=m -CONFIG_FB_BACKLIGHT=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -CONFIG_FB_ARMCLCD=y -# CONFIG_FB_IMX is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_UVESA is not set -CONFIG_FB_EFI=y -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_NVIDIA=m -# CONFIG_FB_NVIDIA_I2C is not set -# CONFIG_FB_NVIDIA_DEBUG is not set -CONFIG_FB_NVIDIA_BACKLIGHT=y -CONFIG_FB_RIVA=m -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -# CONFIG_FB_I740 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -CONFIG_FB_3DFX_I2C=y -# CONFIG_FB_VOODOO1 is not set -CONFIG_FB_VT8623=m -# CONFIG_FB_TRIDENT is not set -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -# CONFIG_FB_CARMINE is not set -CONFIG_FB_VT8500=y -CONFIG_FB_WM8505=y -# CONFIG_FB_WMT_GE_ROPS is not set -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_DA8XX is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=y -# CONFIG_FB_METRONOME is not set -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_MX3=y -# CONFIG_FB_MXS is not set -CONFIG_FB_SIMPLE=y -# CONFIG_FB_SSD1307 is not set -# CONFIG_FB_SM712 is not set -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_BACKLIGHT_PWM=m -# CONFIG_BACKLIGHT_DA9052 is not set -# CONFIG_BACKLIGHT_PM8941_WLED is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -# CONFIG_BACKLIGHT_LP855X is not set -CONFIG_BACKLIGHT_PANDORA=m -CONFIG_BACKLIGHT_GPIO=m -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_BACKLIGHT_ARCXCNN is not set -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -# CONFIG_LOGO is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -CONFIG_SND_ALOOP=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -CONFIG_SND_MTS64=m -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDSP is not set -CONFIG_SND_HDSPM=m -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -CONFIG_SND_LOLA=m -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -CONFIG_SND_VIRTUOSO=m -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# HD-Audio -# -CONFIG_SND_HDA=m -# CONFIG_SND_HDA_INTEL is not set -CONFIG_SND_HDA_TEGRA=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=1 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_PREALLOC_SIZE=2048 -CONFIG_SND_ARM=y -# CONFIG_SND_ARMAACI is not set -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -# CONFIG_SND_FIREWIRE_MOTU is not set -# CONFIG_SND_FIREFACE is not set -CONFIG_SND_SOC=m -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -# CONFIG_SND_SOC_AMD_ACP is not set -# CONFIG_SND_ATMEL_SOC is not set -CONFIG_SND_BCM2835_SOC_I2S=m -# CONFIG_SND_DESIGNWARE_I2S is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -CONFIG_SND_SOC_FSL_ASRC=m -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -# CONFIG_SND_SOC_FSL_ESAI is not set -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_FSL_UTILS=m -CONFIG_SND_SOC_IMX_PCM_DMA=m -CONFIG_SND_SOC_IMX_AUDMUX=m -CONFIG_SND_IMX_SOC=m -CONFIG_SND_SOC_IMX_PCM_FIQ=m -CONFIG_SND_SOC_IMX_SSI=m - -# -# SoC Audio support for Freescale i.MX boards: -# -CONFIG_SND_SOC_EUKREA_TLV320=m -CONFIG_SND_SOC_IMX_ES8328=m -CONFIG_SND_SOC_IMX_SGTL5000=m -CONFIG_SND_SOC_IMX_SPDIF=m -CONFIG_SND_SOC_IMX_MC13783=m -# CONFIG_SND_SOC_FSL_ASOC_CARD is not set -CONFIG_SND_SOC_IMX_AUDMIX=m -# end of SoC Audio for Freescale CPUs - -# CONFIG_SND_I2S_HI6210_I2S is not set -# CONFIG_SND_KIRKWOOD_SOC is not set -# CONFIG_SND_SOC_IMG is not set -# CONFIG_SND_SOC_MTK_BTCVSD is not set -CONFIG_SND_SOC_ROCKCHIP=m -CONFIG_SND_SOC_ROCKCHIP_I2S=m -# CONFIG_SND_SOC_ROCKCHIP_PDM is not set -CONFIG_SND_SOC_ROCKCHIP_SPDIF=m -CONFIG_SND_SOC_ROCKCHIP_MAX98090=m -CONFIG_SND_SOC_ROCKCHIP_RT5645=m -# CONFIG_SND_SOC_RK3288_HDMI_ANALOG is not set -# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set -# CONFIG_SND_SOC_SAMSUNG is not set -# CONFIG_SND_SOC_SOF_TOPLEVEL is not set - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -# -# Allwinner SoC Audio support -# -CONFIG_SND_SUN4I_CODEC=m -# CONFIG_SND_SUN8I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC_ANALOG is not set -# CONFIG_SND_SUN4I_I2S is not set -CONFIG_SND_SUN4I_SPDIF=m -# end of Allwinner SoC Audio support - -CONFIG_SND_SOC_TEGRA=m -CONFIG_SND_SOC_TEGRA20_AC97=m -CONFIG_SND_SOC_TEGRA20_DAS=m -CONFIG_SND_SOC_TEGRA20_I2S=m -CONFIG_SND_SOC_TEGRA20_SPDIF=m -CONFIG_SND_SOC_TEGRA30_AHUB=m -CONFIG_SND_SOC_TEGRA30_I2S=m -CONFIG_SND_SOC_TEGRA_RT5640=m -CONFIG_SND_SOC_TEGRA_WM8753=m -CONFIG_SND_SOC_TEGRA_WM8903=m -CONFIG_SND_SOC_TEGRA_WM9712=m -CONFIG_SND_SOC_TEGRA_TRIMSLICE=m -CONFIG_SND_SOC_TEGRA_ALC5632=m -CONFIG_SND_SOC_TEGRA_MAX98090=m -CONFIG_SND_SOC_TEGRA_RT5677=m -# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set - -# -# Audio support for Texas Instruments SoCs -# -CONFIG_SND_SOC_TI_EDMA_PCM=m -CONFIG_SND_SOC_TI_SDMA_PCM=m - -# -# Texas Instruments DAI support for: -# -CONFIG_SND_SOC_DAVINCI_MCASP=m -CONFIG_SND_SOC_OMAP_DMIC=m -CONFIG_SND_SOC_OMAP_MCBSP=m -CONFIG_SND_SOC_OMAP_MCPDM=m - -# -# Audio support for boards with Texas Instruments SoCs -# -CONFIG_SND_SOC_NOKIA_RX51=m -CONFIG_SND_SOC_OMAP3_PANDORA=m -CONFIG_SND_SOC_OMAP3_TWL4030=m -CONFIG_SND_SOC_OMAP_ABE_TWL6040=m -CONFIG_SND_SOC_OMAP_HDMI=m -# end of Audio support for Texas Instruments SoCs - -# CONFIG_SND_SOC_XILINX_I2S is not set -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -# CONFIG_SND_SOC_XTFPGA_I2S is not set -# CONFIG_ZX_TDM is not set -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_ADAU1761_I2C is not set -# CONFIG_SND_SOC_ADAU1761_SPI is not set -# CONFIG_SND_SOC_ADAU7002 is not set -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4118 is not set -# CONFIG_SND_SOC_AK4458 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4613 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_AK5558 is not set -# CONFIG_SND_SOC_ALC5623 is not set -CONFIG_SND_SOC_ALC5632=m -# CONFIG_SND_SOC_BD28623 is not set -# CONFIG_SND_SOC_BT_SCO is not set -CONFIG_SND_SOC_CROS_EC_CODEC=m -# CONFIG_SND_SOC_CS35L32 is not set -# CONFIG_SND_SOC_CS35L33 is not set -# CONFIG_SND_SOC_CS35L34 is not set -# CONFIG_SND_SOC_CS35L35 is not set -# CONFIG_SND_SOC_CS35L36 is not set -# CONFIG_SND_SOC_CS42L42 is not set -# CONFIG_SND_SOC_CS42L51_I2C is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4265 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271_I2C is not set -# CONFIG_SND_SOC_CS4271_SPI is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_CS43130 is not set -# CONFIG_SND_SOC_CS4341 is not set -# CONFIG_SND_SOC_CS4349 is not set -# CONFIG_SND_SOC_CS53L30 is not set -CONFIG_SND_SOC_DMIC=m -CONFIG_SND_SOC_HDMI_CODEC=m -# CONFIG_SND_SOC_ES7134 is not set -# CONFIG_SND_SOC_ES7241 is not set -# CONFIG_SND_SOC_ES8316 is not set -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -# CONFIG_SND_SOC_GTM601 is not set -# CONFIG_SND_SOC_INNO_RK3036 is not set -# CONFIG_SND_SOC_MAX98088 is not set -CONFIG_SND_SOC_MAX98090=m -# CONFIG_SND_SOC_MAX98504 is not set -# CONFIG_SND_SOC_MAX9867 is not set -# CONFIG_SND_SOC_MAX98927 is not set -# CONFIG_SND_SOC_MAX98373 is not set -# CONFIG_SND_SOC_MAX9860 is not set -# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1789_I2C is not set -# CONFIG_SND_SOC_PCM179X_I2C is not set -# CONFIG_SND_SOC_PCM179X_SPI is not set -# CONFIG_SND_SOC_PCM186X_I2C is not set -# CONFIG_SND_SOC_PCM186X_SPI is not set -# CONFIG_SND_SOC_PCM3060_I2C is not set -# CONFIG_SND_SOC_PCM3060_SPI is not set -# CONFIG_SND_SOC_PCM3168A_I2C is not set -# CONFIG_SND_SOC_PCM3168A_SPI is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -CONFIG_SND_SOC_RK3328=m -CONFIG_SND_SOC_RL6231=m -# CONFIG_SND_SOC_RT5616 is not set -# CONFIG_SND_SOC_RT5631 is not set -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_SGTL5000=m -# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_SSM2305 is not set -# CONFIG_SND_SOC_SSM2602_SPI is not set -# CONFIG_SND_SOC_SSM2602_I2C is not set -# CONFIG_SND_SOC_SSM4567 is not set -# CONFIG_SND_SOC_STA32X is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_STI_SAS is not set -# CONFIG_SND_SOC_TAS2552 is not set -# CONFIG_SND_SOC_TAS5086 is not set -# CONFIG_SND_SOC_TAS571X is not set -# CONFIG_SND_SOC_TAS5720 is not set -# CONFIG_SND_SOC_TAS6424 is not set -# CONFIG_SND_SOC_TDA7419 is not set -# CONFIG_SND_SOC_TFA9879 is not set -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -# CONFIG_SND_SOC_TLV320AIC23_SPI is not set -# CONFIG_SND_SOC_TLV320AIC31XX is not set -# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set -# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set -CONFIG_SND_SOC_TLV320AIC3X=m -CONFIG_SND_SOC_TS3A227E=m -# CONFIG_SND_SOC_TSCS42XX is not set -# CONFIG_SND_SOC_TSCS454 is not set -CONFIG_SND_SOC_TWL4030=m -CONFIG_SND_SOC_TWL6040=m -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8524 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -CONFIG_SND_SOC_WM8753=m -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8782 is not set -# CONFIG_SND_SOC_WM8804_I2C is not set -# CONFIG_SND_SOC_WM8804_SPI is not set -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8962 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8978 is not set -# CONFIG_SND_SOC_WM8985 is not set -CONFIG_SND_SOC_WM9712=m -# CONFIG_SND_SOC_ZX_AUD96P22 is not set -# CONFIG_SND_SOC_MAX9759 is not set -CONFIG_SND_SOC_MC13783=m -# CONFIG_SND_SOC_MT6351 is not set -# CONFIG_SND_SOC_MT6358 is not set -# CONFIG_SND_SOC_NAU8540 is not set -# CONFIG_SND_SOC_NAU8810 is not set -# CONFIG_SND_SOC_NAU8822 is not set -# CONFIG_SND_SOC_NAU8824 is not set -CONFIG_SND_SOC_TPA6130A2=m -# end of CODEC drivers - -CONFIG_SND_SIMPLE_CARD_UTILS=m -CONFIG_SND_SIMPLE_CARD=m -# CONFIG_SND_AUDIO_GRAPH_CARD is not set -# CONFIG_SND_XEN_FRONTEND is not set -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -# CONFIG_HID_ACCUTOUCH is not set -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -# CONFIG_HID_APPLEIR is not set -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -# CONFIG_HID_BIGBEN_FF is not set -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -# CONFIG_HID_ELAN is not set -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -# CONFIG_HID_GFRM is not set -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -# CONFIG_HID_GOOGLE_HAMMER is not set -# CONFIG_HID_GT683R is not set -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -# CONFIG_HID_VIEWSONIC is not set -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -# CONFIG_HID_ITE is not set -CONFIG_HID_JABRA=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -# CONFIG_HID_MALTRON is not set -# CONFIG_HID_MAYFLASH is not set -# CONFIG_HID_REDRAGON is not set -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -# CONFIG_HID_NTI is not set -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -# CONFIG_HID_RETRODE is not set -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -# CONFIG_HID_STEAM is not set -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -# CONFIG_HID_UDRAW_PS3 is not set -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -# CONFIG_I2C_HID is not set -# end of I2C HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=m -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_XHCI_HCD=m -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=m -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_XHCI_MVEBU=m -CONFIG_USB_XHCI_TEGRA=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=m -CONFIG_USB_EHCI_FSL=m -CONFIG_USB_EHCI_MXC=m -CONFIG_USB_EHCI_HCD_OMAP=m -CONFIG_USB_EHCI_HCD_ORION=m -CONFIG_USB_EHCI_TEGRA=m -CONFIG_USB_EHCI_EXYNOS=m -CONFIG_USB_EHCI_HCD_PLATFORM=m -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_MAX3421_HCD is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_OMAP3=m -CONFIG_USB_OHCI_HCD_PCI=m -# CONFIG_USB_OHCI_HCD_SSB is not set -CONFIG_USB_OHCI_EXYNOS=m -CONFIG_USB_OHCI_HCD_PLATFORM=m -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC=y -CONFIG_USB_UHCI_PLATFORM=y -CONFIG_USB_U132_HCD=m -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m -# CONFIG_USB_IMX21_HCD is not set -# CONFIG_USB_HCD_BCMA is not set -# CONFIG_USB_HCD_SSB is not set -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -# CONFIG_USBIP_CORE is not set -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# -CONFIG_USB_MUSB_SUNXI=m -CONFIG_USB_MUSB_TUSB6010=m -CONFIG_USB_MUSB_OMAP2PLUS=m -CONFIG_USB_MUSB_AM35X=m -CONFIG_USB_MUSB_DSPS=m -CONFIG_USB_MUSB_AM335X_CHILD=m - -# -# MUSB DMA mode -# -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_INVENTRA_DMA=y -CONFIG_USB_TI_CPPI41_DMA=y -CONFIG_USB_TUSB_OMAP_DMA=y -CONFIG_USB_DWC3=m -# CONFIG_USB_DWC3_ULPI is not set -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_OMAP=m -CONFIG_USB_DWC3_EXYNOS=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC3_OF_SIMPLE=m -CONFIG_USB_DWC2=m -# CONFIG_USB_DWC2_HOST is not set - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y -# CONFIG_USB_DWC2_PCI is not set -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_OF=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -# CONFIG_USB_ISP1760 is not set - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -# CONFIG_USB_SERIAL_F8153X is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -# CONFIG_USB_SERIAL_UPD78F0730 is not set -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -# CONFIG_USB_HUB_USB251XB is not set -CONFIG_USB_HSIC_USB3503=m -# CONFIG_USB_HSIC_USB4604 is not set -# CONFIG_USB_LINK_LAYER_TEST is not set -CONFIG_USB_CHAOSKEY=m -# CONFIG_USB_ATM is not set - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -CONFIG_AM335X_CONTROL_USB=m -CONFIG_AM335X_PHY_USB=m -CONFIG_TWL6030_USB=m -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ISP1301 is not set -CONFIG_USB_MXS_PHY=m -CONFIG_USB_TEGRA_PHY=m -CONFIG_USB_ULPI=y -CONFIG_USB_ULPI_VIEWPORT=y -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -# CONFIG_USB_FSL_USB2 is not set -# CONFIG_USB_FUSB300 is not set -# CONFIG_USB_FOTG210_UDC is not set -# CONFIG_USB_GR_UDC is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_MV_U3D is not set -# CONFIG_USB_SNP_UDC_PLAT is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_BDC_UDC is not set -# CONFIG_USB_AMD5536UDC is not set -# CONFIG_USB_NET2272 is not set -CONFIG_USB_NET2280=m -# CONFIG_USB_GOKU is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_GADGET_XILINX is not set -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_G_NCM is not set -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_GADGET_TARGET is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -CONFIG_USB_G_NOKIA=m -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set -# CONFIG_TYPEC is not set -CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m -CONFIG_MMC=y -CONFIG_PWRSEQ_EMMC=y -# CONFIG_PWRSEQ_SD8787 is not set -CONFIG_PWRSEQ_SIMPLE=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=256 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_ARMMMCI=m -CONFIG_MMC_STM32_SDMMC=y -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_PLTFM=m -# CONFIG_MMC_SDHCI_OF_ARASAN is not set -# CONFIG_MMC_SDHCI_OF_AT91 is not set -# CONFIG_MMC_SDHCI_OF_ESDHC is not set -# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set -# CONFIG_MMC_SDHCI_CADENCE is not set -CONFIG_MMC_SDHCI_ESDHC_IMX=m -CONFIG_MMC_SDHCI_TEGRA=m -CONFIG_MMC_SDHCI_S3C=m -CONFIG_MMC_SDHCI_PXAV3=m -# CONFIG_MMC_SDHCI_S3C_DMA is not set -# CONFIG_MMC_SDHCI_F_SDH30 is not set -CONFIG_MMC_SDHCI_IPROC=m -CONFIG_MMC_OMAP=m -CONFIG_MMC_OMAP_HS=m -CONFIG_MMC_ALCOR=m -# CONFIG_MMC_MXC is not set -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_MVSDIO=m -CONFIG_MMC_SPI=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_DW=m -CONFIG_MMC_DW_PLTFM=m -# CONFIG_MMC_DW_BLUEFIELD is not set -CONFIG_MMC_DW_EXYNOS=m -# CONFIG_MMC_DW_HI3798CV200 is not set -# CONFIG_MMC_DW_K3 is not set -# CONFIG_MMC_DW_PCI is not set -CONFIG_MMC_DW_ROCKCHIP=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_WMT=m -# CONFIG_MMC_USDHI6ROL0 is not set -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_SUNXI=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_BCM2835=m -# CONFIG_MMC_MTK is not set -# CONFIG_MMC_SDHCI_XENON is not set -# CONFIG_MMC_SDHCI_OMAP is not set -CONFIG_MMC_SDHCI_AM654=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -# CONFIG_MS_BLOCK is not set - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_CLASS_FLASH is not set -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -# CONFIG_LEDS_AN30259A is not set -# CONFIG_LEDS_BCM6328 is not set -# CONFIG_LEDS_BCM6358 is not set -# CONFIG_LEDS_CR0014114 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3532 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_LM3692X is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -# CONFIG_LEDS_LP3952 is not set -CONFIG_LEDS_LP55XX_COMMON=m -# CONFIG_LEDS_LP5521 is not set -CONFIG_LEDS_LP5523=m -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -# CONFIG_LEDS_PCA963X is not set -CONFIG_LEDS_DA9052=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_LT3593=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_NS2=y -CONFIG_LEDS_TCA6507=m -# CONFIG_LEDS_TLC591XX is not set -# CONFIG_LEDS_LM355x is not set -# CONFIG_LEDS_IS31FL319X is not set -# CONFIG_LEDS_IS31FL32XX is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set -# CONFIG_LEDS_SYSCON is not set -# CONFIG_LEDS_MLXREG is not set -# CONFIG_LEDS_USER is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LEDS_TRIGGER_MTD=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_ACTIVITY=m -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -# CONFIG_LEDS_TRIGGER_NETDEV is not set -# CONFIG_LEDS_TRIGGER_PATTERN is not set -# CONFIG_LEDS_TRIGGER_AUDIO is not set -CONFIG_ACCESSIBILITY=y -CONFIG_A11Y_BRAILLE_CONSOLE=y -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_CXGB3=m -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_RDMA_RXE=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_ABB5ZES3 is not set -# CONFIG_RTC_DRV_ABEOZ9 is not set -# CONFIG_RTC_DRV_ABX80X is not set -CONFIG_RTC_DRV_AS3722=y -CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_RK808=y -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12026 is not set -# CONFIG_RTC_DRV_X1205 is not set -CONFIG_RTC_DRV_PCF8523=y -# CONFIG_RTC_DRV_PCF85063 is not set -# CONFIG_RTC_DRV_PCF85363 is not set -CONFIG_RTC_DRV_PCF8563=y -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_BQ32K is not set -CONFIG_RTC_DRV_TWL4030=y -CONFIG_RTC_DRV_PALMAS=y -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8010 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3028 is not set -# CONFIG_RTC_DRV_RV8803 is not set -CONFIG_RTC_DRV_S5M=y -# CONFIG_RTC_DRV_SD3078 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1302 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6916 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_RX6110 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_MCP795 is not set -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=m -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1685_FAMILY is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DS2404 is not set -CONFIG_RTC_DRV_DA9052=y -CONFIG_RTC_DRV_EFI=y -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_ZYNQMP is not set -CONFIG_RTC_DRV_CROS_EC=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_IMXDI=y -CONFIG_RTC_DRV_OMAP=y -CONFIG_HAVE_S3C_RTC=y -# CONFIG_RTC_DRV_S3C is not set -CONFIG_RTC_DRV_PL030=y -CONFIG_RTC_DRV_PL031=y -CONFIG_RTC_DRV_VT8500=y -CONFIG_RTC_DRV_SUN6I=y -CONFIG_RTC_DRV_SUNXI=y -CONFIG_RTC_DRV_MV=y -CONFIG_RTC_DRV_ARMADA38X=y -# CONFIG_RTC_DRV_CADENCE is not set -# CONFIG_RTC_DRV_FTRTC010 is not set -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_TEGRA=y -CONFIG_RTC_DRV_MXC=y -CONFIG_RTC_DRV_MXC_V2=m -CONFIG_RTC_DRV_SNVS=y -# CONFIG_RTC_DRV_R7301 is not set - -# -# HID Sensor RTC drivers -# -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DMA_OF=y -CONFIG_ALTERA_MSGDMA=m -CONFIG_AMBA_PL08X=y -# CONFIG_AXI_DMAC is not set -CONFIG_DMA_BCM2835=y -CONFIG_DMA_SUN4I=y -CONFIG_DMA_SUN6I=m -# CONFIG_DW_AXI_DMAC is not set -# CONFIG_FSL_EDMA is not set -# CONFIG_FSL_QDMA is not set -CONFIG_IMX_DMA=y -CONFIG_IMX_SDMA=y -# CONFIG_INTEL_IDMA64 is not set -CONFIG_MV_XOR=y -CONFIG_MXS_DMA=y -CONFIG_MX3_IPU=y -CONFIG_MX3_IPU_IRQS=4 -# CONFIG_NBPFAXI_DMA is not set -CONFIG_PL330_DMA=y -CONFIG_TEGRA20_APB_DMA=y -# CONFIG_QCOM_HIDMA_MGMT is not set -# CONFIG_QCOM_HIDMA is not set -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_TI_CPPI41=m -CONFIG_TI_EDMA=y -CONFIG_DMA_OMAP=y -CONFIG_TI_DMA_CROSSBAR=y - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set -CONFIG_DMA_ENGINE_RAID=y - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# end of DMABUF options - -# CONFIG_AUXDISPLAY is not set -# CONFIG_PANEL is not set -CONFIG_UIO=m -CONFIG_UIO_CIF=m -# CONFIG_UIO_PDRV_GENIRQ is not set -# CONFIG_UIO_DMEM_GENIRQ is not set -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -# CONFIG_UIO_PRUSS is not set -CONFIG_UIO_MF624=m -# CONFIG_VFIO is not set -CONFIG_VIRT_DRIVERS=y -CONFIG_VIRTIO=m -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=m -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_BALLOON=m -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=m -# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set - -# -# Microsoft Hyper-V guest support -# -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_PVCALLS_FRONTEND=m -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_EFI=y -CONFIG_XEN_AUTO_XLATE=y -# end of Xen driver support - -CONFIG_STAGING=y -# CONFIG_PRISM2_USB is not set -# CONFIG_COMEDI is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTLLIB is not set -# CONFIG_RTL8723BS is not set -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -# CONFIG_RTS5208 is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set - -# -# IIO staging drivers -# - -# -# Accelerometers -# -# CONFIG_ADIS16203 is not set -# CONFIG_ADIS16240 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -# CONFIG_AD7816 is not set -# CONFIG_AD7192 is not set -# CONFIG_AD7280 is not set -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -# CONFIG_ADT7316 is not set -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -# CONFIG_AD7150 is not set -# CONFIG_AD7746 is not set -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -# CONFIG_AD9832 is not set -# CONFIG_AD9834 is not set -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -# CONFIG_AD5933 is not set -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -# CONFIG_ADE7854 is not set -# end of Active energy metering IC - -# -# Resolver to digital converters -# -# CONFIG_AD2S1210 is not set -# end of Resolver to digital converters -# end of IIO staging drivers - -# CONFIG_FB_SM750 is not set - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -# CONFIG_MFD_NVEC is not set -# CONFIG_STAGING_MEDIA is not set - -# -# Android -# -# end of Android - -# CONFIG_STAGING_BOARD is not set -# CONFIG_LTE_GDM724X is not set -# CONFIG_FIREWIRE_SERIAL is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_UNISYSSPAR is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set -# CONFIG_FB_TFT is not set -# CONFIG_WILC1000_SDIO is not set -# CONFIG_WILC1000_SPI is not set -# CONFIG_MOST is not set -# CONFIG_KS7010 is not set -# CONFIG_GREYBUS is not set -CONFIG_BCM_VIDEOCORE=y -# CONFIG_BCM2835_VCHIQ is not set -# CONFIG_SND_BCM2835 is not set -# CONFIG_VIDEO_BCM2835 is not set -CONFIG_PI433=m - -# -# Gasket devices -# -# end of Gasket devices - -# CONFIG_XIL_AXIS_FIFO is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set -# CONFIG_FIELDBUS_DEV is not set -# CONFIG_KPC2000 is not set -# CONFIG_GOLDFISH is not set -CONFIG_CHROME_PLATFORMS=y -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_PROTO=y -# CONFIG_CROS_EC_LIGHTBAR is not set -CONFIG_CROS_EC_VBC=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SYSFS=m -CONFIG_CROS_USBPD_LOGGER=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_ICST=y -CONFIG_COMMON_CLK_VERSATILE=y -CONFIG_CLK_SP810=y -CONFIG_CLK_VEXPRESS_OSC=y -# CONFIG_CLK_HSDK is not set -CONFIG_COMMON_CLK_MAX77686=m -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_RK808=m -CONFIG_COMMON_CLK_SCMI=m -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI514 is not set -# CONFIG_COMMON_CLK_SI544 is not set -# CONFIG_COMMON_CLK_SI570 is not set -# CONFIG_COMMON_CLK_CDCE706 is not set -# CONFIG_COMMON_CLK_CDCE925 is not set -# CONFIG_COMMON_CLK_CS2000_CP is not set -CONFIG_COMMON_CLK_S2MPS11=m -CONFIG_CLK_TWL6040=m -# CONFIG_CLK_QORIQ is not set -CONFIG_COMMON_CLK_PALMAS=m -# CONFIG_COMMON_CLK_PWM is not set -# CONFIG_COMMON_CLK_VC5 is not set -# CONFIG_COMMON_CLK_BD718XX is not set -# CONFIG_COMMON_CLK_FIXED_MMIO is not set -CONFIG_MXC_CLK=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_ARMADA_370_CLK=y -CONFIG_ARMADA_375_CLK=y -CONFIG_ARMADA_38X_CLK=y -CONFIG_ARMADA_39X_CLK=y -CONFIG_ARMADA_XP_CLK=y -CONFIG_COMMON_CLK_SAMSUNG=y -CONFIG_EXYNOS_AUDSS_CLK_CON=y -CONFIG_CLK_SUNXI=y -CONFIG_CLK_SUNXI_CLOCKS=y -CONFIG_CLK_SUNXI_PRCM_SUN6I=y -CONFIG_CLK_SUNXI_PRCM_SUN8I=y -CONFIG_CLK_SUNXI_PRCM_SUN9I=y -CONFIG_SUNXI_CCU=y -CONFIG_SUN4I_A10_CCU=y -CONFIG_SUN5I_CCU=y -CONFIG_SUN6I_A31_CCU=y -CONFIG_SUN8I_A23_CCU=y -CONFIG_SUN8I_A33_CCU=y -CONFIG_SUN8I_A83T_CCU=y -CONFIG_SUN8I_H3_CCU=y -CONFIG_SUN8I_V3S_CCU=y -# CONFIG_SUN8I_DE2_CCU is not set -CONFIG_SUN8I_R40_CCU=y -CONFIG_SUN9I_A80_CCU=y -CONFIG_SUN8I_R_CCU=y -CONFIG_TEGRA_CLK_EMC=y -CONFIG_TEGRA_CLK_DFLL=y -CONFIG_COMMON_CLK_TI_ADPLL=y -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_OMAP_DM_TIMER=y -CONFIG_CLKSRC_MMIO=y -CONFIG_BCM2835_TIMER=y -CONFIG_DW_APB_TIMER=y -CONFIG_DW_APB_TIMER_OF=y -CONFIG_ROCKCHIP_TIMER=y -CONFIG_ARMADA_370_XP_TIMER=y -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_TEGRA_TIMER=y -CONFIG_VT8500_TIMER=y -CONFIG_CLKSRC_TI_32K=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_GLOBAL_TIMER=y -CONFIG_ARM_TIMER_SP804=y -CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y -CONFIG_CLKSRC_EXYNOS_MCT=y -CONFIG_CLKSRC_SAMSUNG_PWM=y -CONFIG_CLKSRC_VERSATILE=y -CONFIG_CLKSRC_IMX_GPT=y -# end of Clock Source drivers - -CONFIG_MAILBOX=y -# CONFIG_ARM_MHU is not set -CONFIG_IMX_MBOX=m -# CONFIG_PLATFORM_MHU is not set -CONFIG_PL320_MBOX=y -# CONFIG_ARMADA_37XX_RWTM_MBOX is not set -CONFIG_OMAP2PLUS_MBOX=y -CONFIG_OMAP_MBOX_KFIFO_SIZE=256 -# CONFIG_ROCKCHIP_MBOX is not set -# CONFIG_ALTERA_MBOX is not set -CONFIG_BCM2835_MBOX=y -# CONFIG_MAILBOX_TEST is not set -# CONFIG_TEGRA_HSP_MBOX is not set -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -CONFIG_IOMMU_IO_PGTABLE=y -CONFIG_IOMMU_IO_PGTABLE_LPAE=y -# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_OF_IOMMU=y -CONFIG_OMAP_IOMMU=y -# CONFIG_OMAP_IOMMU_DEBUG is not set -CONFIG_ROCKCHIP_IOMMU=y -CONFIG_TEGRA_IOMMU_SMMU=y -# CONFIG_EXYNOS_IOMMU is not set -# CONFIG_ARM_SMMU is not set - -# -# Remoteproc drivers -# -# CONFIG_REMOTEPROC is not set -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -# CONFIG_RPMSG_QCOM_GLINK_RPM is not set -# CONFIG_RPMSG_VIRTIO is not set -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -CONFIG_BCM2835_POWER=y -CONFIG_RASPBERRYPI_POWER=y -# CONFIG_SOC_BRCMSTB is not set -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -CONFIG_IMX_GPCV2_PM_DOMAINS=y -# end of i.MX SoC drivers - -# -# IXP4xx SoC drivers -# -# CONFIG_IXP4XX_QMGR is not set -# CONFIG_IXP4XX_NPE is not set -# end of IXP4xx SoC drivers - -# -# Qualcomm SoC drivers -# -# end of Qualcomm SoC drivers - -CONFIG_ROCKCHIP_GRF=y -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_SOC_SAMSUNG=y -CONFIG_EXYNOS_PMU=y -CONFIG_EXYNOS_PMU_ARM_DRIVERS=y -CONFIG_EXYNOS_PM_DOMAINS=y -CONFIG_SUNXI_SRAM=y -# CONFIG_ARCH_TEGRA_2x_SOC is not set -# CONFIG_ARCH_TEGRA_3x_SOC is not set -# CONFIG_ARCH_TEGRA_114_SOC is not set -CONFIG_ARCH_TEGRA_124_SOC=y -CONFIG_SOC_TEGRA_FUSE=y -CONFIG_SOC_TEGRA_FLOWCTRL=y -CONFIG_SOC_TEGRA_PMC=y -# CONFIG_SOC_TI is not set - -# -# Xilinx SoC drivers -# -# CONFIG_XILINX_VCU is not set -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m -# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set -# CONFIG_DEVFREQ_GOV_POWERSAVE is not set -# CONFIG_DEVFREQ_GOV_USERSPACE is not set -# CONFIG_DEVFREQ_GOV_PASSIVE is not set - -# -# DEVFREQ Drivers -# -# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set -CONFIG_ARM_TEGRA_DEVFREQ=m -# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set -# CONFIG_PM_DEVFREQ_EVENT is not set -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -# CONFIG_EXTCON_ADC_JACK is not set -# CONFIG_EXTCON_GPIO is not set -# CONFIG_EXTCON_MAX3355 is not set -CONFIG_EXTCON_PALMAS=m -CONFIG_EXTCON_PTN5150=m -# CONFIG_EXTCON_RT8973A is not set -# CONFIG_EXTCON_SM5502 is not set -CONFIG_EXTCON_USB_GPIO=m -CONFIG_EXTCON_USBC_CROS_EC=m -CONFIG_MEMORY=y -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_TI_EMIF=m -CONFIG_OMAP_GPMC=y -# CONFIG_OMAP_GPMC_DEBUG is not set -CONFIG_TI_EMIF_SRAM=m -CONFIG_MVEBU_DEVBUS=y -CONFIG_PL353_SMC=y -CONFIG_SAMSUNG_MC=y -CONFIG_EXYNOS_SROM=y -CONFIG_TEGRA_MC=y -CONFIG_TEGRA124_EMC=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=m -# CONFIG_IIO_BUFFER_HW_CONSUMER is not set -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -# CONFIG_IIO_CONFIGFS is not set -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -# CONFIG_IIO_SW_DEVICE is not set -# CONFIG_IIO_SW_TRIGGER is not set - -# -# Accelerometers -# -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADXL345_I2C is not set -# CONFIG_ADXL345_SPI is not set -# CONFIG_ADXL372_SPI is not set -# CONFIG_ADXL372_I2C is not set -# CONFIG_BMA180 is not set -# CONFIG_BMA220 is not set -# CONFIG_BMC150_ACCEL is not set -# CONFIG_DA280 is not set -# CONFIG_DA311 is not set -# CONFIG_DMARD06 is not set -# CONFIG_DMARD09 is not set -# CONFIG_DMARD10 is not set -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -# CONFIG_KXSD9 is not set -# CONFIG_KXCJK1013 is not set -# CONFIG_MC3230 is not set -# CONFIG_MMA7455_I2C is not set -# CONFIG_MMA7455_SPI is not set -# CONFIG_MMA7660 is not set -CONFIG_MMA8452=m -# CONFIG_MMA9551 is not set -# CONFIG_MMA9553 is not set -# CONFIG_MXC4005 is not set -# CONFIG_MXC6255 is not set -# CONFIG_SCA3000 is not set -# CONFIG_STK8312 is not set -# CONFIG_STK8BA50 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -# CONFIG_AD7124 is not set -# CONFIG_AD7266 is not set -# CONFIG_AD7291 is not set -# CONFIG_AD7298 is not set -# CONFIG_AD7476 is not set -# CONFIG_AD7606_IFACE_PARALLEL is not set -# CONFIG_AD7606_IFACE_SPI is not set -# CONFIG_AD7766 is not set -# CONFIG_AD7768_1 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7791 is not set -# CONFIG_AD7793 is not set -# CONFIG_AD7887 is not set -# CONFIG_AD7923 is not set -# CONFIG_AD7949 is not set -# CONFIG_AD799X is not set -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -# CONFIG_CC10001_ADC is not set -# CONFIG_ENVELOPE_DETECTOR is not set -CONFIG_EXYNOS_ADC=m -# CONFIG_HI8435 is not set -# CONFIG_HX711 is not set -# CONFIG_INA2XX_ADC is not set -# CONFIG_IMX7D_ADC is not set -CONFIG_LTC2471=m -# CONFIG_LTC2485 is not set -# CONFIG_LTC2497 is not set -# CONFIG_MAX1027 is not set -# CONFIG_MAX11100 is not set -# CONFIG_MAX1118 is not set -# CONFIG_MAX1363 is not set -# CONFIG_MAX9611 is not set -# CONFIG_MCP320X is not set -# CONFIG_MCP3422 is not set -# CONFIG_MCP3911 is not set -# CONFIG_NAU7802 is not set -# CONFIG_PALMAS_GPADC is not set -CONFIG_ROCKCHIP_SARADC=m -CONFIG_SD_ADC_MODULATOR=m -# CONFIG_STMPE_ADC is not set -# CONFIG_SUN4I_GPADC is not set -# CONFIG_TI_ADC081C is not set -# CONFIG_TI_ADC0832 is not set -# CONFIG_TI_ADC084S021 is not set -# CONFIG_TI_ADC12138 is not set -# CONFIG_TI_ADC108S102 is not set -# CONFIG_TI_ADC128S052 is not set -# CONFIG_TI_ADC161S626 is not set -# CONFIG_TI_ADS1015 is not set -# CONFIG_TI_ADS7950 is not set -# CONFIG_TI_ADS8344 is not set -# CONFIG_TI_ADS8688 is not set -# CONFIG_TI_ADS124S08 is not set -CONFIG_TI_AM335X_ADC=m -# CONFIG_TI_TLC4541 is not set -CONFIG_TWL4030_MADC=m -# CONFIG_TWL6030_GPADC is not set -# CONFIG_VF610_ADC is not set -CONFIG_VIPERBOARD_ADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# CONFIG_IIO_RESCALE is not set -# end of Analog Front Ends - -# -# Amplifiers -# -# CONFIG_AD8366 is not set -# end of Amplifiers - -# -# Chemical Sensors -# -# CONFIG_ATLAS_PH_SENSOR is not set -# CONFIG_BME680 is not set -CONFIG_CCS811=m -# CONFIG_IAQCORE is not set -# CONFIG_SENSIRION_SGP30 is not set -# CONFIG_SPS30 is not set -# CONFIG_VZ89X is not set -# end of Chemical Sensors - -# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -# -# SSP Sensor Common -# -# CONFIG_IIO_SSP_SENSORHUB is not set -# end of SSP Sensor Common - -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_SPI=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Digital to analog converters -# -# CONFIG_AD5064 is not set -# CONFIG_AD5360 is not set -# CONFIG_AD5380 is not set -# CONFIG_AD5421 is not set -# CONFIG_AD5446 is not set -# CONFIG_AD5449 is not set -# CONFIG_AD5592R is not set -# CONFIG_AD5593R is not set -# CONFIG_AD5504 is not set -# CONFIG_AD5624R_SPI is not set -# CONFIG_LTC1660 is not set -# CONFIG_LTC2632 is not set -# CONFIG_AD5686_SPI is not set -# CONFIG_AD5696_I2C is not set -# CONFIG_AD5755 is not set -# CONFIG_AD5758 is not set -# CONFIG_AD5761 is not set -# CONFIG_AD5764 is not set -# CONFIG_AD5791 is not set -# CONFIG_AD7303 is not set -# CONFIG_AD8801 is not set -# CONFIG_DPOT_DAC is not set -# CONFIG_DS4424 is not set -# CONFIG_M62332 is not set -# CONFIG_MAX517 is not set -# CONFIG_MAX5821 is not set -# CONFIG_MCP4725 is not set -# CONFIG_MCP4922 is not set -# CONFIG_TI_DAC082S085 is not set -# CONFIG_TI_DAC5571 is not set -# CONFIG_TI_DAC7311 is not set -# CONFIG_TI_DAC7612 is not set -# CONFIG_VF610_DAC is not set -# end of Digital to analog converters - -# -# IIO dummy driver -# -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -# CONFIG_AD9523 is not set -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -# CONFIG_ADF4350 is not set -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -# CONFIG_ADIS16080 is not set -# CONFIG_ADIS16130 is not set -# CONFIG_ADIS16136 is not set -# CONFIG_ADIS16260 is not set -# CONFIG_ADXRS450 is not set -# CONFIG_BMG160 is not set -# CONFIG_FXAS21002C is not set -CONFIG_HID_SENSOR_GYRO_3D=m -# CONFIG_MPU3050_I2C is not set -# CONFIG_IIO_ST_GYRO_3AXIS is not set -# CONFIG_ITG3200 is not set -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -# CONFIG_AFE4403 is not set -# CONFIG_AFE4404 is not set -# CONFIG_MAX30100 is not set -# CONFIG_MAX30102 is not set -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -# CONFIG_AM2315 is not set -# CONFIG_DHT11 is not set -# CONFIG_HDC100X is not set -# CONFIG_HID_SENSOR_HUMIDITY is not set -# CONFIG_HTS221 is not set -# CONFIG_HTU21 is not set -# CONFIG_SI7005 is not set -# CONFIG_SI7020 is not set -# end of Humidity sensors - -# -# Inertial measurement units -# -# CONFIG_ADIS16400 is not set -# CONFIG_ADIS16480 is not set -# CONFIG_BMI160_I2C is not set -# CONFIG_BMI160_SPI is not set -# CONFIG_KMX61 is not set -# CONFIG_INV_MPU6050_I2C is not set -# CONFIG_INV_MPU6050_SPI is not set -# CONFIG_IIO_ST_LSM6DSX is not set -# end of Inertial measurement units - -# -# Light sensors -# -# CONFIG_ADJD_S311 is not set -# CONFIG_AL3320A is not set -# CONFIG_APDS9300 is not set -# CONFIG_APDS9960 is not set -# CONFIG_BH1750 is not set -CONFIG_BH1780=m -# CONFIG_CM32181 is not set -# CONFIG_CM3232 is not set -# CONFIG_CM3323 is not set -# CONFIG_CM3605 is not set -# CONFIG_CM36651 is not set -# CONFIG_GP2AP020A00F is not set -# CONFIG_SENSORS_ISL29018 is not set -# CONFIG_SENSORS_ISL29028 is not set -# CONFIG_ISL29125 is not set -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -# CONFIG_JSA1212 is not set -# CONFIG_RPR0521 is not set -# CONFIG_LTR501 is not set -# CONFIG_LV0104CS is not set -# CONFIG_MAX44000 is not set -# CONFIG_MAX44009 is not set -# CONFIG_OPT3001 is not set -# CONFIG_PA12203001 is not set -# CONFIG_SI1133 is not set -# CONFIG_SI1145 is not set -# CONFIG_STK3310 is not set -# CONFIG_ST_UVIS25 is not set -# CONFIG_TCS3414 is not set -# CONFIG_TCS3472 is not set -CONFIG_SENSORS_TSL2563=m -# CONFIG_TSL2583 is not set -# CONFIG_TSL2772 is not set -# CONFIG_TSL4531 is not set -# CONFIG_US5182D is not set -# CONFIG_VCNL4000 is not set -# CONFIG_VCNL4035 is not set -# CONFIG_VEML6070 is not set -# CONFIG_VL6180 is not set -# CONFIG_ZOPT2201 is not set -# end of Light sensors - -# -# Magnetometer sensors -# -# CONFIG_AK8974 is not set -# CONFIG_AK8975 is not set -# CONFIG_AK09911 is not set -# CONFIG_BMC150_MAGN_I2C is not set -# CONFIG_BMC150_MAGN_SPI is not set -# CONFIG_MAG3110 is not set -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -# CONFIG_MMC35240 is not set -# CONFIG_IIO_ST_MAGN_3AXIS is not set -# CONFIG_SENSORS_HMC5843_I2C is not set -# CONFIG_SENSORS_HMC5843_SPI is not set -# CONFIG_SENSORS_RM3100_I2C is not set -# CONFIG_SENSORS_RM3100_SPI is not set -# end of Magnetometer sensors - -# -# Multiplexers -# -# CONFIG_IIO_MUX is not set -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -# CONFIG_IIO_INTERRUPT_TRIGGER is not set -# CONFIG_IIO_SYSFS_TRIGGER is not set -# end of Triggers - standalone - -# -# Digital potentiometers -# -# CONFIG_AD5272 is not set -# CONFIG_DS1803 is not set -# CONFIG_MAX5481 is not set -# CONFIG_MAX5487 is not set -# CONFIG_MCP4018 is not set -# CONFIG_MCP4131 is not set -# CONFIG_MCP4531 is not set -# CONFIG_MCP41010 is not set -# CONFIG_TPL0102 is not set -# end of Digital potentiometers - -# -# Digital potentiostats -# -# CONFIG_LMP91000 is not set -# end of Digital potentiostats - -# -# Pressure sensors -# -# CONFIG_ABP060MG is not set -# CONFIG_BMP280 is not set -CONFIG_HID_SENSOR_PRESS=m -# CONFIG_HP03 is not set -# CONFIG_MPL115_I2C is not set -# CONFIG_MPL115_SPI is not set -# CONFIG_MPL3115 is not set -# CONFIG_MS5611 is not set -# CONFIG_MS5637 is not set -# CONFIG_IIO_ST_PRESS is not set -# CONFIG_T5403 is not set -# CONFIG_HP206C is not set -# CONFIG_ZPA2326 is not set -# end of Pressure sensors - -# -# Lightning sensors -# -# CONFIG_AS3935 is not set -# end of Lightning sensors - -# -# Proximity and distance sensors -# -# CONFIG_ISL29501 is not set -# CONFIG_LIDAR_LITE_V2 is not set -# CONFIG_MB1232 is not set -# CONFIG_RFD77402 is not set -# CONFIG_SRF04 is not set -# CONFIG_SX9500 is not set -# CONFIG_SRF08 is not set -# CONFIG_VL53L0X_I2C is not set -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -# CONFIG_AD2S90 is not set -# CONFIG_AD2S1200 is not set -# end of Resolver to digital converters - -# -# Temperature sensors -# -# CONFIG_MAXIM_THERMOCOUPLE is not set -# CONFIG_HID_SENSOR_TEMP is not set -# CONFIG_MLX90614 is not set -# CONFIG_MLX90632 is not set -# CONFIG_TMP006 is not set -# CONFIG_TMP007 is not set -# CONFIG_TSYS01 is not set -# CONFIG_TSYS02D is not set -# CONFIG_MAX31856 is not set -# end of Temperature sensors - -# CONFIG_NTB is not set -# CONFIG_VME_BUS is not set -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_PWM_BCM2835=m -# CONFIG_PWM_CROS_EC is not set -# CONFIG_PWM_FSL_FTM is not set -# CONFIG_PWM_IMX1 is not set -# CONFIG_PWM_IMX27 is not set -CONFIG_PWM_IMX_TPM=m -CONFIG_PWM_OMAP_DMTIMER=m -# CONFIG_PWM_PCA9685 is not set -CONFIG_PWM_ROCKCHIP=m -CONFIG_PWM_SAMSUNG=m -# CONFIG_PWM_STMPE is not set -CONFIG_PWM_SUN4I=m -CONFIG_PWM_TEGRA=m -CONFIG_PWM_TIECAP=m -CONFIG_PWM_TIEHRPWM=m -CONFIG_PWM_TIPWMSS=y -CONFIG_PWM_TWL=m -CONFIG_PWM_TWL_LED=m -CONFIG_PWM_VT8500=m - -# -# IRQ chip support -# -CONFIG_IRQCHIP=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_MAX_NR=1 -CONFIG_ARM_GIC_V2M=y -CONFIG_GIC_NON_BANKED=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -CONFIG_ARMADA_370_XP_IRQ=y -CONFIG_MADERA_IRQ=m -CONFIG_OMAP_IRQCHIP=y -# CONFIG_TS4800_IRQ is not set -CONFIG_IRQ_CROSSBAR=y -CONFIG_PARTITION_PERCPU=y -CONFIG_IMX_IRQSTEER=y -# end of IRQ chip support - -# CONFIG_IPACK_BUS is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_SIMPLE=y -CONFIG_RESET_SOCFPGA=y -CONFIG_RESET_SUNXI=y -# CONFIG_RESET_TI_SYSCON is not set -# CONFIG_FMC is not set - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PHY_MIPI_DPHY=y -CONFIG_PHY_SUN4I_USB=m -CONFIG_PHY_SUN6I_MIPI_DPHY=m -CONFIG_PHY_SUN9I_USB=m -# CONFIG_BCM_KONA_USB2_PHY is not set -# CONFIG_PHY_CADENCE_DP is not set -# CONFIG_PHY_CADENCE_DPHY is not set -# CONFIG_PHY_CADENCE_SIERRA is not set -# CONFIG_PHY_FSL_IMX8MQ_USB is not set -CONFIG_ARMADA375_USBCLUSTER_PHY=y -CONFIG_PHY_MVEBU_A3700_COMPHY=m -CONFIG_PHY_MVEBU_A3700_UTMI=m -CONFIG_PHY_MVEBU_A38X_COMPHY=m -CONFIG_PHY_MVEBU_CP110_COMPHY=m -# CONFIG_PHY_PXA_28NM_HSIC is not set -# CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_PHY_CPCAP_USB is not set -# CONFIG_PHY_MAPPHONE_MDM6600 is not set -# CONFIG_PHY_OCELOT_SERDES is not set -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_ROCKCHIP_DP=m -CONFIG_PHY_ROCKCHIP_EMMC=m -# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set -# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set -# CONFIG_PHY_ROCKCHIP_PCIE is not set -# CONFIG_PHY_ROCKCHIP_TYPEC is not set -CONFIG_PHY_ROCKCHIP_USB=m -CONFIG_PHY_EXYNOS_DP_VIDEO=m -CONFIG_PHY_EXYNOS_MIPI_VIDEO=m -# CONFIG_PHY_EXYNOS_PCIE is not set -CONFIG_PHY_SAMSUNG_USB2=m -CONFIG_PHY_EXYNOS4210_USB2=y -CONFIG_PHY_EXYNOS4X12_USB2=y -CONFIG_PHY_EXYNOS5250_USB2=y -CONFIG_PHY_EXYNOS5_USBDRD=m -CONFIG_PHY_EXYNOS5250_SATA=m -CONFIG_PHY_TEGRA_XUSB=m -# CONFIG_PHY_DM816X_USB is not set -CONFIG_OMAP_CONTROL_PHY=m -CONFIG_OMAP_USB2=m -CONFIG_TI_PIPE3=m -CONFIG_PHY_TUSB1210=m -CONFIG_TWL4030_USB=m -CONFIG_PHY_TI_GMII_SEL=m -# end of PHY Subsystem - -# CONFIG_POWERCAP is not set -# CONFIG_MCB is not set - -# -# Performance monitor support -# -# CONFIG_ARM_CCI_PMU is not set -# CONFIG_ARM_CCN is not set -CONFIG_ARM_PMU=y -# end of Performance monitor support - -CONFIG_RAS=y - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_DAX=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -# CONFIG_NVMEM_IMX_IIM is not set -# CONFIG_NVMEM_IMX_OCOTP is not set -CONFIG_ROCKCHIP_EFUSE=m -CONFIG_NVMEM_SUNXI_SID=m -# CONFIG_NVMEM_SNVS_LPGPR is not set - -# -# HW tracing support -# -# CONFIG_STM is not set -# CONFIG_INTEL_TH is not set -# end of HW tracing support - -# CONFIG_FPGA is not set -# CONFIG_FSI is not set -# CONFIG_TEE is not set -CONFIG_PM_OPP=y -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -CONFIG_COUNTER=m -CONFIG_FTM_QUADDEC=m -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -CONFIG_EXPORTFS_BLOCK_OPS=y -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -CONFIG_PRINT_QUOTA_WARNING=y -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_DEFAULT_UTF8 is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_MEMFD_CREATE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=m -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ORANGEFS_FS is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=m -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_UBIFS_ATIME_SUPPORT is not set -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -# CONFIG_CRAMFS is not set -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_FILE_CACHE=y -# CONFIG_SQUASHFS_FILE_DIRECT is not set -CONFIG_SQUASHFS_DECOMP_SINGLE=y -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -# CONFIG_SQUASHFS_LZ4 is not set -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZSTD is not set -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -# CONFIG_ROMFS_BACKED_BY_BLOCK is not set -# CONFIG_ROMFS_BACKED_BY_MTD is not set -CONFIG_ROMFS_BACKED_BY_BOTH=y -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_ROMFS_ON_MTD=y -# CONFIG_PSTORE is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -# CONFIG_NFS_V4_1_MIGRATION is not set -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_PNFS=y -CONFIG_NFSD_BLOCKLAYOUT=y -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_ACL=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_DLM_DEBUG=y -# CONFIG_UNICODE is not set -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_TRUSTED_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_KEY_DH_OPERATIONS is not set -CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_LSM_MMAP_MIN_ADDR=32768 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -CONFIG_FORTIFY_SOURCE=y -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set -# CONFIG_SECURITY_SELINUX_DISABLE is not set -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0 -# CONFIG_SECURITY_SMACK is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -CONFIG_IMA=y -CONFIG_IMA_MEASURE_PCR_IDX=10 -CONFIG_IMA_LSM_RULES=y -# CONFIG_IMA_TEMPLATE is not set -CONFIG_IMA_NG_TEMPLATE=y -# CONFIG_IMA_SIG_TEMPLATE is not set -CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" -# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set -CONFIG_IMA_DEFAULT_HASH_SHA256=y -CONFIG_IMA_DEFAULT_HASH="sha256" -# CONFIG_IMA_WRITE_POLICY is not set -# CONFIG_IMA_READ_POLICY is not set -CONFIG_IMA_APPRAISE=y -# CONFIG_IMA_ARCH_POLICY is not set -# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set -CONFIG_IMA_APPRAISE_BOOTPARAM=y -CONFIG_IMA_TRUSTED_KEYRING=y -# CONFIG_IMA_BLACKLIST_KEYRING is not set -# CONFIG_IMA_LOAD_X509 is not set -# CONFIG_EVM is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# -CONFIG_GCC_PLUGIN_STRUCTLEAK=y - -# -# Memory initialization -# -# CONFIG_INIT_STACK_NONE is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set -CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y -# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=m -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=m -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -# CONFIG_CRYPTO_DH is not set -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS1280=m -CONFIG_CRYPTO_SEQIV=m -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -# CONFIG_CRYPTO_KEYWRAP is not set -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_ADIANTUM=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=m -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -# CONFIG_CRYPTO_SHA3 is not set -# CONFIG_CRYPTO_SM3 is not set -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_TI is not set -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_842 is not set -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=m -CONFIG_CRYPTO_DRBG_HMAC=y -# CONFIG_CRYPTO_DRBG_HASH is not set -# CONFIG_CRYPTO_DRBG_CTR is not set -CONFIG_CRYPTO_DRBG=m -CONFIG_CRYPTO_JITTERENTROPY=m -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=m -# CONFIG_CRYPTO_DEV_FSL_CAAM is not set -# CONFIG_CRYPTO_DEV_OMAP is not set -# CONFIG_CRYPTO_DEV_SAHARA is not set -# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set -# CONFIG_CRYPTO_DEV_S5P is not set -# CONFIG_CRYPTO_DEV_MXS_DCP is not set -CONFIG_CRYPTO_DEV_SUN4I_SS=m -# CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG is not set -# CONFIG_CRYPTO_DEV_ROCKCHIP is not set -CONFIG_CRYPTO_DEV_CHELSIO=m -CONFIG_CRYPTO_DEV_VIRTIO=m -# CONFIG_CRYPTO_DEV_CCREE is not set -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_STMP_DEVICE=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -# CONFIG_XZ_DEC_SPARC is not set -CONFIG_XZ_DEC_BCJ=y -# CONFIG_XZ_DEC_TEST is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=16 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_DDR=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_LIBFDT=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_FONT_SUPPORT=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_SG_SPLIT=y -CONFIG_SG_POOL=y -CONFIG_SBITMAP=y -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_INFO_REDUCED is not set -# CONFIG_DEBUG_INFO_SPLIT is not set -# CONFIG_DEBUG_INFO_DWARF4 is not set -# CONFIG_DEBUG_INFO_BTF is not set -# CONFIG_GDB_SCRIPTS is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_OPTIMIZE_INLINING=y -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -CONFIG_PAGE_EXTENSION=y -# CONFIG_PAGE_OWNER is not set -CONFIG_PAGE_POISONING=y -CONFIG_PAGE_POISONING_NO_SANITY=y -# CONFIG_PAGE_POISONING_ZERO is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# end of Debug Lockups and Hangs - -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -# CONFIG_WW_MUTEX_SELFTEST is not set -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LIST=y -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -# CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT is not set -# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -CONFIG_STACK_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -CONFIG_UPROBE_EVENTS=y -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_TEST_HEXDUMP is not set -# CONFIG_TEST_STRING_HELPERS is not set -CONFIG_TEST_STRSCPY=m -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_BITMAP is not set -# CONFIG_TEST_BITFIELD is not set -# CONFIG_TEST_UUID is not set -CONFIG_TEST_XARRAY=m -# CONFIG_TEST_OVERFLOW is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_HASH is not set -# CONFIG_TEST_IDA is not set -# CONFIG_TEST_LKM is not set -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_FIND_BIT_BENCHMARK=m -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -# CONFIG_TEST_UDELAY is not set -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -# CONFIG_TEST_STACKINIT is not set -# CONFIG_MEMTEST is not set -CONFIG_BUG_ON_DATA_CORRUPTION=y -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_UBSAN is not set -CONFIG_UBSAN_ALIGNMENT=y -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y -CONFIG_ARM_PTDUMP_CORE=y -# CONFIG_ARM_PTDUMP_DEBUGFS is not set -CONFIG_DEBUG_WX=y -CONFIG_UNWINDER_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_LL is not set -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -# CONFIG_ARM_KPROBES_TEST is not set -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_CORESIGHT is not set -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.2-arm64.conf b/gnu/packages/aux-files/linux-libre/5.2-arm64.conf deleted file mode 100644 index 99ff63354f..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.2-arm64.conf +++ /dev/null @@ -1,9073 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/arm64 5.2.0-gnu Kernel Configuration -# - -# -# Compiler: gcc (GCC) 7.4.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=70400 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y -CONFIG_THREAD_INFO_IN_TASK=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_USELIB is not set -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_IRQ_MSI_IOMMU=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -# CONFIG_NO_HZ is not set -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_ARCH_SUPPORTS_INT128=y -CONFIG_NUMA_BALANCING=y -CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -# CONFIG_CGROUP_HUGETLB is not set -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -# CONFIG_SGETMASK_SYSCALL is not set -# CONFIG_SYSFS_SYSCALL is not set -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_SYSCALL=y -# CONFIG_BPF_JIT_ALWAYS_ON is not set -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_ARM64=y -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_CONT_SHIFT=4 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=33 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA32=y -CONFIG_HAVE_GENERIC_GUP=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_SMP=y -CONFIG_KERNEL_MODE_NEON=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=4 -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_PROC_KCORE_TEXT=y - -# -# Platform selection -# -# CONFIG_ARCH_ACTIONS is not set -# CONFIG_ARCH_AGILEX is not set -CONFIG_ARCH_SUNXI=y -# CONFIG_ARCH_ALPINE is not set -CONFIG_ARCH_BCM2835=y -# CONFIG_ARCH_BCM_IPROC is not set -# CONFIG_ARCH_BERLIN is not set -CONFIG_ARCH_BITMAIN=y -# CONFIG_ARCH_BRCMSTB is not set -# CONFIG_ARCH_EXYNOS is not set -# CONFIG_ARCH_K3 is not set -# CONFIG_ARCH_LAYERSCAPE is not set -# CONFIG_ARCH_LG1K is not set -CONFIG_ARCH_HISI=y -# CONFIG_ARCH_MEDIATEK is not set -CONFIG_ARCH_MESON=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_MXC=y -CONFIG_ARCH_QCOM=y -# CONFIG_ARCH_REALTEK is not set -# CONFIG_ARCH_RENESAS is not set -CONFIG_ARCH_ROCKCHIP=y -CONFIG_ARCH_SEATTLE=y -# CONFIG_ARCH_STRATIX10 is not set -CONFIG_ARCH_SYNQUACER=y -CONFIG_ARCH_TEGRA=y -# CONFIG_ARCH_SPRD is not set -CONFIG_ARCH_THUNDER=y -CONFIG_ARCH_THUNDER2=y -# CONFIG_ARCH_UNIPHIER is not set -CONFIG_ARCH_VEXPRESS=y -CONFIG_ARCH_XGENE=y -# CONFIG_ARCH_ZX is not set -# CONFIG_ARCH_ZYNQMP is not set -# end of Platform selection - -# -# Kernel Features -# - -# -# ARM errata workarounds via the alternatives framework -# -CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y -CONFIG_ARM64_ERRATUM_826319=y -CONFIG_ARM64_ERRATUM_827319=y -CONFIG_ARM64_ERRATUM_824069=y -CONFIG_ARM64_ERRATUM_819472=y -CONFIG_ARM64_ERRATUM_832075=y -CONFIG_ARM64_ERRATUM_834220=y -CONFIG_ARM64_ERRATUM_845719=y -CONFIG_ARM64_ERRATUM_843419=y -CONFIG_ARM64_ERRATUM_1024718=y -CONFIG_ARM64_ERRATUM_1418040=y -CONFIG_ARM64_ERRATUM_1165522=y -CONFIG_ARM64_ERRATUM_1286807=y -CONFIG_ARM64_ERRATUM_1463225=y -CONFIG_CAVIUM_ERRATUM_22375=y -CONFIG_CAVIUM_ERRATUM_23144=y -CONFIG_CAVIUM_ERRATUM_23154=y -CONFIG_CAVIUM_ERRATUM_27456=y -CONFIG_CAVIUM_ERRATUM_30115=y -CONFIG_QCOM_FALKOR_ERRATUM_1003=y -CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y -CONFIG_QCOM_FALKOR_ERRATUM_1009=y -CONFIG_QCOM_QDF2400_ERRATUM_0065=y -CONFIG_SOCIONEXT_SYNQUACER_PREITS=y -CONFIG_HISILICON_ERRATUM_161600802=y -CONFIG_QCOM_FALKOR_ERRATUM_E1041=y -CONFIG_FUJITSU_ERRATUM_010001=y -# end of ARM errata workarounds via the alternatives framework - -CONFIG_ARM64_4K_PAGES=y -# CONFIG_ARM64_16K_PAGES is not set -# CONFIG_ARM64_64K_PAGES is not set -# CONFIG_ARM64_VA_BITS_39 is not set -CONFIG_ARM64_VA_BITS_48=y -CONFIG_ARM64_VA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_PA_BITS=48 -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_SCHED_MC=y -# CONFIG_SCHED_SMT is not set -CONFIG_NR_CPUS=256 -CONFIG_HOTPLUG_CPU=y -CONFIG_NUMA=y -CONFIG_NODES_SHIFT=2 -CONFIG_USE_PERCPU_NUMA_NODE_ID=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_HOLES_IN_ZONE=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HW_PERF_EVENTS=y -CONFIG_SYS_SUPPORTS_HUGETLBFS=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y -CONFIG_SECCOMP=y -CONFIG_PARAVIRT=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_KEXEC=y -CONFIG_KEXEC_FILE=y -# CONFIG_KEXEC_VERIFY_SIG is not set -CONFIG_CRASH_DUMP=y -CONFIG_XEN_DOM0=y -CONFIG_XEN=y -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDEN_EL2_VECTORS=y -CONFIG_ARM64_SSBD=y -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y -# CONFIG_ARM64_SW_TTBR0_PAN is not set -CONFIG_COMPAT=y -CONFIG_KUSER_HELPERS=y -CONFIG_ARMV8_DEPRECATED=y -CONFIG_SWP_EMULATION=y -CONFIG_CP15_BARRIER_EMULATION=y -CONFIG_SETEND_EMULATION=y - -# -# ARMv8.1 architectural features -# -CONFIG_ARM64_HW_AFDBM=y -CONFIG_ARM64_PAN=y -# CONFIG_ARM64_LSE_ATOMICS is not set -CONFIG_ARM64_VHE=y -# end of ARMv8.1 architectural features - -# -# ARMv8.2 architectural features -# -CONFIG_ARM64_UAO=y -CONFIG_ARM64_PMEM=y -CONFIG_ARM64_RAS_EXTN=y -CONFIG_ARM64_CNP=y -# end of ARMv8.2 architectural features - -# -# ARMv8.3 architectural features -# -CONFIG_ARM64_PTR_AUTH=y -# end of ARMv8.3 architectural features - -CONFIG_ARM64_SVE=y -CONFIG_ARM64_MODULE_PLTS=y -CONFIG_RELOCATABLE=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_RANDOMIZE_MODULE_REGION_FULL=y -# end of Kernel Features - -# -# Boot options -# -CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y -CONFIG_CMDLINE="" -# CONFIG_CMDLINE_FORCE is not set -CONFIG_EFI_STUB=y -CONFIG_EFI=y -CONFIG_DMI=y -# end of Boot options - -CONFIG_SYSVIPC_COMPAT=y -CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y - -# -# Power management options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_DPM_WATCHDOG is not set -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_PM_GENERIC_DOMAINS_SLEEP=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_CPU_PM=y -CONFIG_ENERGY_MODEL=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# end of Power management options - -# -# CPU Power Management -# - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_GOV_TEO=y -CONFIG_DT_IDLE_STATES=y - -# -# ARM CPU Idle Drivers -# -CONFIG_ARM_CPUIDLE=y -# end of ARM CPU Idle Drivers -# end of CPU Idle - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_CPUFREQ_DT=m -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_ACPI_CPPC_CPUFREQ=m -# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set -# CONFIG_ARM_ARMADA_8K_CPUFREQ is not set -# CONFIG_ARM_QCOM_CPUFREQ_HW is not set -CONFIG_ARM_SCMI_CPUFREQ=m -CONFIG_ARM_TEGRA20_CPUFREQ=y -CONFIG_ARM_TEGRA124_CPUFREQ=y -# CONFIG_ARM_TEGRA186_CPUFREQ is not set -# CONFIG_QORIQ_CPUFREQ is not set -# end of CPU Frequency scaling -# end of CPU Power Management - -# -# Firmware Drivers -# -CONFIG_ARM_SCMI_PROTOCOL=y -CONFIG_ARM_SCMI_POWER_DOMAIN=m -# CONFIG_ARM_SCPI_PROTOCOL is not set -# CONFIG_ARM_SDE_INTERFACE is not set -# CONFIG_FIRMWARE_MEMMAP is not set -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=y -CONFIG_RASPBERRYPI_FIRMWARE=y -# CONFIG_FW_CFG_SYSFS is not set -CONFIG_QCOM_SCM=y -CONFIG_QCOM_SCM_64=y -# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set -CONFIG_HAVE_ARM_SMCCC=y -CONFIG_ARM_PSCI_FW=y -# CONFIG_ARM_PSCI_CHECKER is not set -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=m -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set -CONFIG_EFI_PARAMS_FROM_FDT=y -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_ARMSTUB=y -CONFIG_EFI_ARMSTUB_DTB_LOADER=y -# CONFIG_EFI_BOOTLOADER_CONTROL is not set -# CONFIG_EFI_CAPSULE_LOADER is not set -# CONFIG_EFI_TEST is not set -# CONFIG_RESET_ATTACK_MITIGATION is not set -# end of EFI (Extensible Firmware Interface) Support - -CONFIG_EFI_EARLYCON=y -CONFIG_IMX_SCU=y -CONFIG_IMX_SCU_PD=y -CONFIG_MESON_SM=y - -# -# Tegra firmware driver -# -CONFIG_TEGRA_IVC=y -CONFIG_TEGRA_BPMP=y -# end of Tegra firmware driver -# end of Firmware Drivers - -CONFIG_ARCH_SUPPORTS_ACPI=y -CONFIG_ACPI=y -CONFIG_ACPI_GENERIC_GSI=y -CONFIG_ACPI_CCA_REQUIRED=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SPCR_TABLE=y -# CONFIG_ACPI_EC_DEBUGFS is not set -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_FAN=y -CONFIG_ACPI_TAD=m -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_MCFG=y -CONFIG_ACPI_CPPC_LIB=y -CONFIG_ACPI_PROCESSOR=y -# CONFIG_ACPI_IPMI is not set -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_NUMA=y -CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y -CONFIG_ACPI_TABLE_UPGRADE=y -# CONFIG_ACPI_DEBUG is not set -# CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_CONTAINER=y -# CONFIG_ACPI_HED is not set -# CONFIG_ACPI_CUSTOM_METHOD is not set -# CONFIG_ACPI_BGRT is not set -CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y -CONFIG_ACPI_NFIT=y -# CONFIG_NFIT_SECURITY_DEBUG is not set -CONFIG_ACPI_HMAT=y -CONFIG_HAVE_ACPI_APEI=y -# CONFIG_ACPI_APEI is not set -# CONFIG_PMIC_OPREGION is not set -# CONFIG_ACPI_CONFIGFS is not set -CONFIG_ACPI_IORT=y -CONFIG_ACPI_GTDT=y -CONFIG_ACPI_PPTT=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_MMIO=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y -CONFIG_IRQ_BYPASS_MANAGER=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=y -CONFIG_KVM_ARM_HOST=y -CONFIG_KVM_ARM_PMU=y -CONFIG_KVM_INDIRECT_VECTORS=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set -CONFIG_ARM64_CRYPTO=y -CONFIG_CRYPTO_SHA256_ARM64=m -# CONFIG_CRYPTO_SHA512_ARM64 is not set -CONFIG_CRYPTO_SHA1_ARM64_CE=m -CONFIG_CRYPTO_SHA2_ARM64_CE=m -# CONFIG_CRYPTO_SHA512_ARM64_CE is not set -# CONFIG_CRYPTO_SHA3_ARM64 is not set -# CONFIG_CRYPTO_SM3_ARM64_CE is not set -# CONFIG_CRYPTO_SM4_ARM64_CE is not set -CONFIG_CRYPTO_GHASH_ARM64_CE=m -# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set -CONFIG_CRYPTO_AES_ARM64=m -CONFIG_CRYPTO_AES_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64_CE_CCM=m -CONFIG_CRYPTO_AES_ARM64_CE_BLK=m -# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set -# CONFIG_CRYPTO_CHACHA20_NEON is not set -CONFIG_CRYPTO_NHPOLY1305_NEON=m -# CONFIG_CRYPTO_AES_ARM64_BS is not set - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_UPROBES=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_KRETPROBES=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_KEEPINITRD=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_STACKLEAK=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y -CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_COMPAT_OLD_SIGACTION=y -CONFIG_64BIT_TIME=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_VMAP_STACK=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_REFCOUNT_FULL=y -CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -# CONFIG_LOCK_EVENT_COUNTS is not set - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_PLUGIN_HOSTCC="g++" -CONFIG_HAVE_GCC_PLUGINS=y -CONFIG_GCC_PLUGINS=y - -# -# GCC plugins -# -# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set -# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set -# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -# end of GCC plugins -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_TRIM_UNUSED_KSYMS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -# CONFIG_BLK_DEV_ZONED is not set -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -# CONFIG_BLK_CMDLINE_PARSER is not set -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_SED_OPAL=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set -# end of Partition Types - -CONFIG_BLOCK_COMPAT=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -CONFIG_BFQ_GROUP_IOSCHED=y -# end of IO Schedulers - -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y -CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y -CONFIG_ARCH_INLINE_SPIN_LOCK=y -CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y -CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y -CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y -CONFIG_ARCH_INLINE_READ_LOCK=y -CONFIG_ARCH_INLINE_READ_LOCK_BH=y -CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y -CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y -CONFIG_ARCH_INLINE_READ_UNLOCK=y -CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y -CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y -CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y -CONFIG_ARCH_INLINE_WRITE_LOCK=y -CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y -CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y -CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y -CONFIG_INLINE_SPIN_TRYLOCK=y -CONFIG_INLINE_SPIN_TRYLOCK_BH=y -CONFIG_INLINE_SPIN_LOCK=y -CONFIG_INLINE_SPIN_LOCK_BH=y -CONFIG_INLINE_SPIN_LOCK_IRQ=y -CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y -CONFIG_INLINE_SPIN_UNLOCK_BH=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y -CONFIG_INLINE_READ_LOCK=y -CONFIG_INLINE_READ_LOCK_BH=y -CONFIG_INLINE_READ_LOCK_IRQ=y -CONFIG_INLINE_READ_LOCK_IRQSAVE=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_BH=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y -CONFIG_INLINE_WRITE_LOCK=y -CONFIG_INLINE_WRITE_LOCK_BH=y -CONFIG_INLINE_WRITE_LOCK_IRQ=y -CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_BH=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -CONFIG_COMPAT_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_MEMORY_ISOLATION=y -# CONFIG_MEMORY_HOTPLUG is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_MEMORY_FAILURE=y -CONFIG_HWPOISON_INJECT=m -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_TRANSPARENT_HUGE_PAGECACHE=y -# CONFIG_CLEANCACHE is not set -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_ZSWAP=y -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -# CONFIG_Z3FOLD is not set -CONFIG_ZSMALLOC=m -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_FRAME_VECTOR=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -CONFIG_ARCH_HAS_PTE_SPECIAL=y -# end of Memory Management options - -CONFIG_NET=y -CONFIG_COMPAT_NETLINK_MESSAGES=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -# CONFIG_TLS is not set -CONFIG_XFRM=y -CONFIG_XFRM_OFFLOAD=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_MIGRATE=y -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_ESP_OFFLOAD=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -# CONFIG_INET_RAW_DIAG is not set -CONFIG_INET_DIAG_DESTROY=y -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_ESP_OFFLOAD=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -CONFIG_IPV6_SEG6_LWTUNNEL=y -CONFIG_IPV6_SEG6_HMAC=y -CONFIG_IPV6_SEG6_BPF=y -# CONFIG_NETLABEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -CONFIG_NF_CONNTRACK_PROCFS=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_SET=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -# CONFIG_NFT_FLOW_OFFLOAD is not set -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_TABLES_BRIDGE=y -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=y -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_TFRC_LIB=y -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -# CONFIG_DECNET is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -# CONFIG_NET_SCH_CBS is not set -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_SAMPLE=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -CONFIG_NET_CLS_IND=y -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=m -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=y -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -# CONFIG_HSR is not set -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -# CONFIG_QRTR is not set -# CONFIG_NET_NCSI is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -CONFIG_BPF_JIT=y -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -CONFIG_NET_DROP_MONITOR=m -# end of Network testing -# end of Networking options - -# CONFIG_HAMRADIO is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -# CONFIG_CAN_VXCAN is not set -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_FLEXCAN=m -# CONFIG_CAN_GRCAN is not set -# CONFIG_CAN_XILINXCAN is not set -# CONFIG_CAN_C_CAN is not set -# CONFIG_CAN_CC770 is not set -# CONFIG_CAN_IFI_CANFD is not set -# CONFIG_CAN_M_CAN is not set -# CONFIG_CAN_PEAK_PCIEFD is not set -CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -# CONFIG_CAN_SJA1000_PLATFORM is not set -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SOFTING=m - -# -# CAN SPI interfaces -# -# CONFIG_CAN_HI311X is not set -# CONFIG_CAN_MCP251X is not set -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -# CONFIG_CAN_MCBA_USB is not set -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -CONFIG_BT_LEDS=y -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_SERDEV=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_NOKIA is not set -# CONFIG_BT_HCIUART_BCSP is not set -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_RTL=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_WILINK=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_MTKUART=m -CONFIG_BT_QCOMSMD=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -CONFIG_RXKAD=y -# CONFIG_AF_KCM is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=m -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -# CONFIG_RFKILL_GPIO is not set -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -# CONFIG_NET_9P_XEN is not set -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -# CONFIG_CAIF is not set -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -# CONFIG_NFC_NCI is not set -# CONFIG_NFC_HCI is not set - -# -# Near Field Communication (NFC) devices -# -# CONFIG_NFC_TRF7970A is not set -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -# CONFIG_NFC_PN533_I2C is not set -# CONFIG_NFC_ST95HF is not set -# end of Near Field Communication (NFC) devices - -CONFIG_PSAMPLE=m -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=m -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_ARM_AMBA=y -CONFIG_TEGRA_AHB=y -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_SYSCALL=y -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -CONFIG_PCIEAER_INJECT=m -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_REALLOC_ENABLE_AUTO=y -CONFIG_PCI_STUB=m -# CONFIG_PCI_PF_STUB is not set -CONFIG_PCI_ATS=y -CONFIG_PCI_ECAM=y -CONFIG_PCI_BRIDGE_EMUL=y -CONFIG_PCI_IOV=y -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set -CONFIG_PCI_LABEL=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -CONFIG_HOTPLUG_PCI_CPCI=y -CONFIG_HOTPLUG_PCI_SHPC=y - -# -# PCI controller drivers -# -CONFIG_PCI_AARDVARK=y - -# -# Cadence PCIe controllers support -# -# CONFIG_PCIE_CADENCE_HOST is not set -# end of Cadence PCIe controllers support - -# CONFIG_PCI_FTPCI100 is not set -CONFIG_PCI_TEGRA=y -CONFIG_PCI_HOST_COMMON=y -CONFIG_PCI_HOST_GENERIC=y -# CONFIG_PCIE_XILINX is not set -CONFIG_PCI_XGENE=y -CONFIG_PCI_XGENE_MSI=y -# CONFIG_PCIE_ALTERA is not set -CONFIG_PCI_HOST_THUNDER_PEM=y -CONFIG_PCI_HOST_THUNDER_ECAM=y -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_HOST=m - -# -# DesignWare PCI Core Support -# -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -# CONFIG_PCIE_DW_PLAT_HOST is not set -CONFIG_PCI_IMX6=y -CONFIG_PCI_HISI=y -CONFIG_PCIE_QCOM=y -CONFIG_PCIE_ARMADA_8K=y -CONFIG_PCIE_KIRIN=y -# CONFIG_PCIE_HISI_STB is not set -# CONFIG_PCI_MESON is not set -# end of DesignWare PCI Core Support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -# CONFIG_PCI_SW_SWITCHTEC is not set -# end of PCI switch controller drivers - -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Generic Driver Options -# -# CONFIG_UEVENT_HELPER is not set -CONFIG_DEVTMPFS=y -# CONFIG_DEVTMPFS_MOUNT is not set -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -CONFIG_HMEM_REPORTING=y -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_SOC_BUS=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_SPMI=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -CONFIG_GENERIC_ARCH_TOPOLOGY=y -# end of Generic Driver Options - -# -# Bus devices -# -# CONFIG_BRCMSTB_GISB_ARB is not set -# CONFIG_HISILICON_LPC is not set -# CONFIG_IMX_WEIM is not set -CONFIG_QCOM_EBI2=y -# CONFIG_SIMPLE_PM_BUS is not set -CONFIG_SUN50I_DE2_BUS=y -CONFIG_SUNXI_RSB=y -CONFIG_TEGRA_ACONNECT=y -# CONFIG_TEGRA_GMI is not set -CONFIG_VEXPRESS_CONFIG=y -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_GNSS_SERIAL=m -CONFIG_GNSS_MTK_SERIAL=m -CONFIG_GNSS_SIRF_SERIAL=m -CONFIG_GNSS_UBX_SERIAL=m -CONFIG_MTD=m -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_OF_PARTS=m -CONFIG_MTD_AR7_PARTS=m - -# -# Partition parsers -# -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -# CONFIG_SM_FTL is not set -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_RAM=m -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -# CONFIG_MTD_DATAFLASH_OTP is not set -CONFIG_MTD_M25P80=m -# CONFIG_MTD_MCHP23K256 is not set -CONFIG_MTD_SST25L=m -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOCG3 is not set -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -# CONFIG_MTD_ONENAND_GENERIC is not set -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -CONFIG_MTD_NAND_DENALI=m -# CONFIG_MTD_NAND_DENALI_PCI is not set -CONFIG_MTD_NAND_DENALI_DT=m -# CONFIG_MTD_NAND_CAFE is not set -CONFIG_MTD_NAND_MARVELL=m -CONFIG_MTD_NAND_BRCMNAND=m -CONFIG_MTD_NAND_MXC=m -CONFIG_MTD_NAND_SUNXI=m -CONFIG_MTD_NAND_HISI504=m -CONFIG_MTD_NAND_QCOM=m -CONFIG_MTD_NAND_TEGRA=m -CONFIG_MTD_NAND_MESON=m -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_PLATFORM=m - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -# CONFIG_SPI_CADENCE_QUADSPI is not set -CONFIG_SPI_HISI_SFC=m -# CONFIG_SPI_MTK_QUADSPI is not set -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_BLOCK=y -CONFIG_DTC=y -CONFIG_OF=y -# CONFIG_OF_UNITTEST is not set -CONFIG_OF_FLATTREE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_KOBJ=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_MDIO=m -CONFIG_OF_RESERVED_MEM=y -# CONFIG_OF_OVERLAY is not set -CONFIG_OF_NUMA=y -CONFIG_PARPORT=m -# CONFIG_PARPORT_AX88796 is not set -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_CDROM=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SKD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=m -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=m -# CONFIG_VIRTIO_BLK_SCSI is not set -CONFIG_BLK_DEV_RBD=m -# CONFIG_BLK_DEV_RSXX is not set - -# -# NVME Support -# -CONFIG_NVME_CORE=m -CONFIG_BLK_DEV_NVME=m -CONFIG_NVME_MULTIPATH=y -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -CONFIG_NVME_FC=m -CONFIG_NVME_TCP=m -CONFIG_NVME_TARGET=m -# CONFIG_NVME_TARGET_LOOP is not set -CONFIG_NVME_TARGET_RDMA=m -CONFIG_NVME_TARGET_FC=m -# CONFIG_NVME_TARGET_FCLOOP is not set -CONFIG_NVME_TARGET_TCP=m -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -# CONFIG_DUMMY_IRQ is not set -# CONFIG_PHANTOM is not set -CONFIG_SGI_IOC4=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -# CONFIG_HP_ILO is not set -CONFIG_QCOM_COINCELL=m -# CONFIG_QCOM_FASTRPC is not set -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -# CONFIG_USB_SWITCH_FSA9480 is not set -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_SRAM=y -CONFIG_VEXPRESS_SYSCFG=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_MISC_RTSX=m -CONFIG_PVPANIC=m -CONFIG_C2PORT=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_EEPROM_IDT_89HPESX is not set -# CONFIG_EEPROM_EE1004 is not set -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m - -# -# Intel MIC & related support -# - -# -# Intel MIC Bus Driver -# - -# -# SCIF Bus Driver -# - -# -# VOP Bus Driver -# -# CONFIG_VOP_BUS is not set - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# - -# -# SCIF Driver -# - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# - -# -# VOP Driver -# -# end of Intel MIC & related support - -# CONFIG_GENWQE is not set -# CONFIG_ECHO is not set -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -CONFIG_HABANA_AI=m -# end of Misc devices - -# -# SCSI device support -# -CONFIG_SCSI_MOD=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -CONFIG_AIC79XX_DEBUG_ENABLE=y -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_HISI_SAS=m -CONFIG_SCSI_HISI_SAS_PCI=m -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_ADVANSYS=m -# CONFIG_SCSI_ARCMSR is not set -CONFIG_SCSI_ESAS2R=m -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -# CONFIG_SCSI_UFSHCD_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -CONFIG_SCSI_HPTIOP=m -# CONFIG_SCSI_MYRB is not set -# CONFIG_SCSI_MYRS is not set -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -# CONFIG_TCM_QLA2XXX_DEBUG is not set -CONFIG_SCSI_QLA_ISCSI=m -# CONFIG_QEDI is not set -# CONFIG_QEDF is not set -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_AM53C974 is not set -CONFIG_SCSI_WD719X=m -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_HAVE_PATA_PLATFORM=y -CONFIG_ATA=m -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_ACPI=y -CONFIG_SATA_ZPODD=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -CONFIG_AHCI_IMX=m -# CONFIG_AHCI_CEVA is not set -CONFIG_AHCI_MVEBU=m -# CONFIG_AHCI_SUNXI is not set -CONFIG_AHCI_TEGRA=m -CONFIG_AHCI_XGENE=m -# CONFIG_AHCI_QORIQ is not set -CONFIG_SATA_AHCI_SEATTLE=m -# CONFIG_SATA_INIC162X is not set -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=m -# CONFIG_SATA_DWC is not set -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -CONFIG_PATA_ARTOP=m -# CONFIG_PATA_ATIIXP is not set -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IMX is not set -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -# CONFIG_PATA_NETCELL is not set -CONFIG_PATA_NINJA32=m -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -CONFIG_PATA_RDC=m -CONFIG_PATA_SCH=m -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -CONFIG_PATA_SIS=m -CONFIG_PATA_TOSHIBA=m -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_RZ1000 is not set - -# -# Generic fallback / legacy drivers -# -# CONFIG_PATA_ACPI is not set -CONFIG_ATA_GENERIC=m -# CONFIG_PATA_LEGACY is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -# CONFIG_MD_CLUSTER is not set -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -# CONFIG_DM_UNSTRIPED is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_WRITECACHE=m -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -# CONFIG_DM_INTEGRITY is not set -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -# CONFIG_FUSION_LOGGING is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_EQUALIZER=m -# CONFIG_NET_FC is not set -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -CONFIG_IPVTAP=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_TUN=m -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=m -CONFIG_NLMON=m -CONFIG_NET_VRF=m -# CONFIG_VSOCKMON is not set -# CONFIG_ARCNET is not set -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -# CONFIG_ATM_TCP is not set -# CONFIG_ATM_LANAI is not set -# CONFIG_ATM_ENI is not set -CONFIG_ATM_NICSTAR=m -CONFIG_ATM_NICSTAR_USE_SUNI=y -CONFIG_ATM_NICSTAR_USE_IDT77105=y -# CONFIG_ATM_IDT77252 is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -# CONFIG_ATM_HE is not set -CONFIG_ATM_SOLOS=m - -# -# CAIF transport drivers -# - -# -# Distributed Switch Architecture drivers -# -# CONFIG_B53 is not set -# CONFIG_NET_DSA_BCM_SF2 is not set -# CONFIG_NET_DSA_LOOP is not set -# CONFIG_NET_DSA_LANTIQ_GSWIP is not set -# CONFIG_NET_DSA_MT7530 is not set -CONFIG_NET_DSA_MV88E6060=m -# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_SJA1105=m -# CONFIG_NET_DSA_QCA8K is not set -CONFIG_NET_DSA_REALTEK_SMI=m -# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set -# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set -CONFIG_NET_DSA_VITESSE_VSC73XX=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -# CONFIG_SLICOSS is not set -CONFIG_NET_VENDOR_ALLWINNER=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_ALTERA_TSE is not set -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -# CONFIG_AMD8111_ETH is not set -CONFIG_PCNET32=m -CONFIG_AMD_XGBE=m -# CONFIG_AMD_XGBE_DCB is not set -CONFIG_NET_XGENE=m -CONFIG_NET_XGENE_V2=m -CONFIG_NET_VENDOR_AQUANTIA=y -CONFIG_AQTION=m -# CONFIG_NET_VENDOR_ARC is not set -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -# CONFIG_NET_VENDOR_AURORA is not set -CONFIG_NET_VENDOR_BROADCOM=y -# CONFIG_B44 is not set -# CONFIG_BCMGENET is not set -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -# CONFIG_MACB is not set -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_THUNDER_NIC_PF=m -CONFIG_THUNDER_NIC_VF=m -CONFIG_THUNDER_NIC_BGX=m -CONFIG_THUNDER_NIC_RGX=m -CONFIG_CAVIUM_PTP=y -CONFIG_LIQUIDIO=m -# CONFIG_LIQUIDIO_VF is not set -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -CONFIG_NET_VENDOR_CORTINA=y -# CONFIG_GEMINI_ETHERNET is not set -# CONFIG_DNET is not set -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -CONFIG_TULIP_NAPI=y -CONFIG_TULIP_NAPI_HW_MITIGATION=y -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=m -CONFIG_FSL_PQ_MDIO=m -CONFIG_FSL_XGMAC_MDIO=m -CONFIG_GIANFAR=m -CONFIG_NET_VENDOR_HISILICON=y -CONFIG_HIX5HD2_GMAC=m -CONFIG_HISI_FEMAC=m -CONFIG_HIP04_ETH=m -CONFIG_HNS_MDIO=m -CONFIG_HNS=m -CONFIG_HNS_DSAF=m -CONFIG_HNS_ENET=m -# CONFIG_HNS3 is not set -CONFIG_NET_VENDOR_HP=y -# CONFIG_HP100 is not set -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_HINIC=m -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBE_IPSEC=y -CONFIG_IXGBEVF=m -CONFIG_IXGBEVF_IPSEC=y -CONFIG_I40E=m -CONFIG_I40E_DCB=y -# CONFIG_I40EVF is not set -# CONFIG_ICE is not set -# CONFIG_FM10K is not set -# CONFIG_IGC is not set -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_MVNETA=m -CONFIG_MVPP2=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -# CONFIG_OCTEONTX2_AF is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -# CONFIG_MLXSW_CORE is not set -# CONFIG_MLXFW is not set -CONFIG_NET_VENDOR_MICREL=y -# CONFIG_KS8842 is not set -# CONFIG_KS8851 is not set -# CONFIG_KS8851_MLL is not set -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -# CONFIG_ENC28J60 is not set -# CONFIG_ENCX24J600 is not set -# CONFIG_LAN743X is not set -CONFIG_NET_VENDOR_MICROSEMI=y -CONFIG_MSCC_OCELOT_SWITCH=m -CONFIG_MSCC_OCELOT_SWITCH_OCELOT=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -CONFIG_NFP_APP_FLOWER=y -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -# CONFIG_NI_XGE_MANAGEMENT_ENET is not set -CONFIG_NET_VENDOR_8390=y -CONFIG_NE2K_PCI=m -CONFIG_NET_VENDOR_NVIDIA=y -# CONFIG_FORCEDETH is not set -CONFIG_NET_VENDOR_OKI=y -# CONFIG_ETHOC is not set -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QED_LL2=y -CONFIG_QED_SRIOV=y -CONFIG_QEDE=m -CONFIG_QED_RDMA=y -CONFIG_QED_OOO=y -CONFIG_NET_VENDOR_QUALCOMM=y -# CONFIG_QCA7000_SPI is not set -# CONFIG_QCA7000_UART is not set -CONFIG_QCOM_EMAC=m -# CONFIG_RMNET is not set -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -# CONFIG_ROCKER is not set -CONFIG_NET_VENDOR_SAMSUNG=y -# CONFIG_SXGBE_ETH is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -# CONFIG_SIS900 is not set -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC91X=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -CONFIG_NET_VENDOR_SOCIONEXT=y -CONFIG_SNI_NETSEC=m -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -CONFIG_STMMAC_PLATFORM=m -# CONFIG_DWMAC_DWC_QOS_ETH is not set -CONFIG_DWMAC_GENERIC=m -CONFIG_DWMAC_IPQ806X=m -CONFIG_DWMAC_MESON=m -CONFIG_DWMAC_QCOM_ETHQOS=m -CONFIG_DWMAC_ROCKCHIP=m -CONFIG_DWMAC_SUNXI=m -CONFIG_DWMAC_SUN8I=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -# CONFIG_DWC_XLGMAC is not set -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -# CONFIG_TI_CPSW_PHY_SEL is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -# CONFIG_VIA_RHINE is not set -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -# CONFIG_WIZNET_W5100 is not set -# CONFIG_WIZNET_W5300 is not set -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -# CONFIG_NET_SB1000 is not set -CONFIG_MDIO_DEVICE=m -CONFIG_MDIO_BUS=m -# CONFIG_MDIO_BCM_UNIMAC is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_MDIO_BUS_MUX=m -# CONFIG_MDIO_BUS_MUX_GPIO is not set -CONFIG_MDIO_BUS_MUX_MESON_G12A=m -CONFIG_MDIO_BUS_MUX_MMIOREG=m -# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set -CONFIG_MDIO_CAVIUM=m -CONFIG_MDIO_HISI_FEMAC=m -CONFIG_MDIO_MSCC_MIIM=m -# CONFIG_MDIO_OCTEON is not set -# CONFIG_MDIO_SUN4I is not set -CONFIG_MDIO_THUNDER=m -CONFIG_MDIO_XGENE=m -CONFIG_PHYLINK=m -CONFIG_PHYLIB=m -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -# CONFIG_SFP is not set -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -CONFIG_AT803X_PHY=m -# CONFIG_BCM7XXX_PHY is not set -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_CICADA_PHY=m -# CONFIG_CORTINA_PHY is not set -CONFIG_DAVICOM_PHY=m -# CONFIG_DP83822_PHY is not set -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_FIXED_PHY=m -CONFIG_ICPLUS_PHY=m -# CONFIG_INTEL_XWAY_PHY is not set -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MESON_GXL_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -# CONFIG_RENESAS_PHY is not set -# CONFIG_ROCKCHIP_PHY is not set -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -# CONFIG_XILINX_GMII2RGMII is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y - -# -# Host-side USB support is needed for USB Network Adapter support -# -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -# CONFIG_ATH9K_AHB is not set -# CONFIG_ATH9K_DEBUGFS is not set -# CONFIG_ATH9K_DYNACK is not set -# CONFIG_ATH9K_WOW is not set -CONFIG_ATH9K_RFKILL=y -# CONFIG_ATH9K_CHANNEL_CONTEXT is not set -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -# CONFIG_ATH9K_HWRNG is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -# CONFIG_CARL9170_HWRNG is not set -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -# CONFIG_ATH10K_AHB is not set -# CONFIG_ATH10K_SDIO is not set -# CONFIG_ATH10K_USB is not set -# CONFIG_ATH10K_SNOC is not set -# CONFIG_ATH10K_DEBUG is not set -# CONFIG_ATH10K_DEBUGFS is not set -# CONFIG_ATH10K_TRACING is not set -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set -CONFIG_WLAN_VENDOR_ATMEL=y -# CONFIG_ATMEL is not set -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_SDIO=y -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -CONFIG_B43LEGACY_DEBUG=y -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -# CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_WLAN_VENDOR_INTEL=y -# CONFIG_IPW2100 is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -# CONFIG_IWLWIFI_DEVICE_TRACING is not set -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -# CONFIG_HERMES is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -# CONFIG_P54_SPI is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_SPI is not set -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -# CONFIG_MWIFIEX is not set -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -# CONFIG_RT2800USB_UNKNOWN is not set -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -# CONFIG_RTL8XXXU_UNTESTED is not set -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y -# CONFIG_RSI_SDIO is not set -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -# CONFIG_CW1200 is not set -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SPI=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -# CONFIG_USB_ZD1201 is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_QTNFMAC=m -CONFIG_QTNFMAC_PCIE=m -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -# CONFIG_WAN is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not set -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -# CONFIG_IEEE802154_CA8210 is not set -CONFIG_IEEE802154_MCR20A=m -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=m -CONFIG_XEN_NETDEV_BACKEND=m -# CONFIG_VMXNET3 is not set -# CONFIG_FUJITSU_ES is not set -# CONFIG_NETDEVSIM is not set -CONFIG_NET_FAILOVER=m -# CONFIG_ISDN is not set -# CONFIG_NVM is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ADC is not set -CONFIG_KEYBOARD_ADP5588=m -# CONFIG_KEYBOARD_ADP5589 is not set -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -# CONFIG_KEYBOARD_QT1070 is not set -CONFIG_KEYBOARD_QT2160=m -# CONFIG_KEYBOARD_DLINK_DIR685 is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=m -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_MATRIX is not set -CONFIG_KEYBOARD_LM8323=m -# CONFIG_KEYBOARD_LM8333 is not set -CONFIG_KEYBOARD_MAX7359=m -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -CONFIG_KEYBOARD_SNVS_PWRKEY=m -CONFIG_KEYBOARD_IMX=m -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_TEGRA=m -CONFIG_KEYBOARD_OPENCORES=m -# CONFIG_KEYBOARD_SAMSUNG is not set -CONFIG_KEYBOARD_STOWAWAY=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_SUN4I_LRADC is not set -# CONFIG_KEYBOARD_OMAP4 is not set -# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_CROS_EC is not set -# CONFIG_KEYBOARD_CAP11XX is not set -# CONFIG_KEYBOARD_BCM is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_SMBUS=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -# CONFIG_MOUSE_ELAN_I2C is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ATMEL_CAPTOUCH is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_E3X0_BUTTON is not set -# CONFIG_INPUT_MSM_VIBRATOR is not set -CONFIG_INPUT_PM8941_PWRKEY=m -# CONFIG_INPUT_PM8XXX_VIBRATOR is not set -# CONFIG_INPUT_MMA8450 is not set -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_DECODER is not set -# CONFIG_INPUT_GPIO_VIBRA is not set -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -# CONFIG_INPUT_KXTJ9 is not set -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -# CONFIG_INPUT_REGULATOR_HAPTIC is not set -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_UINPUT=m -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_PWM_VIBRA is not set -# CONFIG_INPUT_RK805_PWRKEY is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_CMA3000 is not set -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set -# CONFIG_INPUT_DRV260X_HAPTICS is not set -# CONFIG_INPUT_DRV2665_HAPTICS is not set -# CONFIG_INPUT_DRV2667_HAPTICS is not set -CONFIG_INPUT_HISI_POWERKEY=m -CONFIG_RMI4_CORE=m -# CONFIG_RMI4_I2C is not set -# CONFIG_RMI4_SPI is not set -# CONFIG_RMI4_SMB is not set -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -# CONFIG_RMI4_F55 is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_ALTERA_PS2=m -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_SERIO_APBPS2 is not set -# CONFIG_SERIO_SUN4I_PS2 is not set -# CONFIG_SERIO_GPIO_PS2 is not set -# CONFIG_USERIO is not set -# CONFIG_GAMEPORT is not set -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_NOZOMI=m -CONFIG_N_GSM=m -# CONFIG_TRACE_SINK is not set -CONFIG_NULL_TTY=m -CONFIG_LDISC_AUTOLOAD=y -CONFIG_DEVMEM=y - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_PNP=y -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_ASPEED_VUART is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set -CONFIG_SERIAL_8250_BCM2835AUX=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_DW=y -# CONFIG_SERIAL_8250_RT288X is not set -CONFIG_SERIAL_8250_MOXA=m -CONFIG_SERIAL_OF_PLATFORM=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -CONFIG_SERIAL_MESON=y -CONFIG_SERIAL_MESON_CONSOLE=y -CONFIG_SERIAL_TEGRA=y -CONFIG_SERIAL_TEGRA_TCU=m -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -CONFIG_SERIAL_IMX=m -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SERIAL_QCOM_GENI=m -# CONFIG_SERIAL_SIFIVE is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -# CONFIG_SERIAL_ARC is not set -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -# CONFIG_SERIAL_FSL_LPUART is not set -# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set -CONFIG_SERIAL_MVEBU_UART=y -CONFIG_SERIAL_MVEBU_CONSOLE=y -# end of Serial drivers - -CONFIG_SERIAL_MCTRL_GPIO=m -CONFIG_SERIAL_DEV_BUS=m -CONFIG_TTY_PRINTK=m -CONFIG_TTY_PRINTK_LEVEL=6 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -# CONFIG_HVC_DCC is not set -CONFIG_VIRTIO_CONSOLE=m -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DMI_DECODE=y -CONFIG_IPMI_PLAT_DATA=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_SSIF=m -# CONFIG_IPMI_WATCHDOG is not set -# CONFIG_IPMI_POWEROFF is not set -CONFIG_HW_RANDOM=m -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_BCM2835=m -# CONFIG_HW_RANDOM_OMAP is not set -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_IMX_RNGC=m -CONFIG_HW_RANDOM_HISI=m -CONFIG_HW_RANDOM_XGENE=m -CONFIG_HW_RANDOM_MESON=m -CONFIG_HW_RANDOM_CAVIUM=m -CONFIG_HW_RANDOM_OPTEE=m -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_XILLYBUS is not set -# end of Character devices - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_ACPI_I2C_OPREGION=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_GPMUX is not set -# CONFIG_I2C_MUX_LTC4306 is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_MUX_REG is not set -# CONFIG_I2C_DEMUX_PINCTRL is not set -# CONFIG_I2C_MUX_MLXCPLD is not set -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_AMD_MP2 is not set -# CONFIG_I2C_HIX5HD2 is not set -# CONFIG_I2C_I801 is not set -CONFIG_I2C_ISCH=m -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_NVIDIA_GPU is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# ACPI drivers -# -# CONFIG_I2C_SCMI is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_BCM2835=m -# CONFIG_I2C_CADENCE is not set -# CONFIG_I2C_CBUS_GPIO is not set -CONFIG_I2C_DESIGNWARE_CORE=m -CONFIG_I2C_DESIGNWARE_PLATFORM=m -# CONFIG_I2C_DESIGNWARE_SLAVE is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_EMEV2 is not set -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_IMX=m -CONFIG_I2C_IMX_LPI2C=m -CONFIG_I2C_MESON=m -CONFIG_I2C_MV64XXX=m -# CONFIG_I2C_NOMADIK is not set -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -CONFIG_I2C_PXA=m -# CONFIG_I2C_PXA_SLAVE is not set -CONFIG_I2C_QCOM_GENI=m -CONFIG_I2C_QUP=m -CONFIG_I2C_RK3X=m -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_SYNQUACER=m -CONFIG_I2C_TEGRA=m -CONFIG_I2C_TEGRA_BPMP=y -# CONFIG_I2C_VERSATILE is not set -CONFIG_I2C_THUNDERX=m -# CONFIG_I2C_XILINX is not set -CONFIG_I2C_XLP9XX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_CROS_EC_TUNNEL=m -CONFIG_I2C_XGENE_SLIMPRO=m -# end of I2C Hardware Bus support - -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_SLAVE is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -CONFIG_I3C=m -CONFIG_CDNS_I3C_MASTER=m -CONFIG_DW_I3C_MASTER=m -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_ALTERA is not set -CONFIG_SPI_ARMADA_3700=m -# CONFIG_SPI_AXI_SPI_ENGINE is not set -CONFIG_SPI_BCM2835=m -CONFIG_SPI_BCM2835AUX=m -CONFIG_SPI_BITBANG=m -CONFIG_SPI_BUTTERFLY=m -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_DESIGNWARE is not set -CONFIG_SPI_FSL_LPSPI=m -CONFIG_SPI_FSL_QUADSPI=m -CONFIG_SPI_NXP_FLEXSPI=m -# CONFIG_SPI_GPIO is not set -CONFIG_SPI_IMX=m -CONFIG_SPI_LM70_LLP=m -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_MESON_SPICC is not set -CONFIG_SPI_MESON_SPIFC=m -# CONFIG_SPI_OC_TINY is not set -# CONFIG_SPI_ORION is not set -# CONFIG_SPI_PL022 is not set -# CONFIG_SPI_PXA2XX is not set -# CONFIG_SPI_ROCKCHIP is not set -# CONFIG_SPI_QCOM_QSPI is not set -CONFIG_SPI_QUP=m -# CONFIG_SPI_QCOM_GENI is not set -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_SIFIVE is not set -# CONFIG_SPI_SUN4I is not set -# CONFIG_SPI_SUN6I is not set -# CONFIG_SPI_MXIC is not set -CONFIG_SPI_TEGRA114=m -CONFIG_SPI_TEGRA20_SFLASH=m -CONFIG_SPI_TEGRA20_SLINK=m -CONFIG_SPI_THUNDERX=m -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -CONFIG_SPI_XLP=m -# CONFIG_SPI_ZYNQMP_GQSPI is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_LOOPBACK_TEST is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPI_SLAVE is not set -CONFIG_SPMI=y -CONFIG_SPMI_MSM_PMIC_ARB=y -# CONFIG_HSI is not set -CONFIG_PPS=y -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -# CONFIG_PPS_CLIENT_GPIO is not set - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_QORIQ=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_PINMUX=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AXP209=m -CONFIG_PINCTRL_AMD=y -CONFIG_PINCTRL_BM1880=y -# CONFIG_PINCTRL_MCP23S08 is not set -CONFIG_PINCTRL_ROCKCHIP=y -CONFIG_PINCTRL_SINGLE=y -# CONFIG_PINCTRL_SX150X is not set -# CONFIG_PINCTRL_STMFX is not set -CONFIG_PINCTRL_MAX77620=y -# CONFIG_PINCTRL_RK805 is not set -# CONFIG_PINCTRL_OCELOT is not set -CONFIG_PINCTRL_BCM2835=y -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX_SCU=y -CONFIG_PINCTRL_IMX8MM=y -CONFIG_PINCTRL_IMX8MQ=y -CONFIG_PINCTRL_IMX8QM=y -CONFIG_PINCTRL_IMX8QXP=y -CONFIG_PINCTRL_MVEBU=y -CONFIG_PINCTRL_ARMADA_AP806=y -CONFIG_PINCTRL_ARMADA_CP110=y -CONFIG_PINCTRL_ARMADA_37XX=y -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -# CONFIG_PINCTRL_IPQ4019 is not set -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_IPQ8074 is not set -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_MDM9615 is not set -# CONFIG_PINCTRL_MSM8X74 is not set -CONFIG_PINCTRL_MSM8916=y -# CONFIG_PINCTRL_MSM8994 is not set -CONFIG_PINCTRL_MSM8996=y -# CONFIG_PINCTRL_MSM8998 is not set -# CONFIG_PINCTRL_QCS404 is not set -# CONFIG_PINCTRL_QDF2XXX is not set -CONFIG_PINCTRL_QCOM_SPMI_PMIC=y -CONFIG_PINCTRL_QCOM_SSBI_PMIC=y -# CONFIG_PINCTRL_SDM660 is not set -# CONFIG_PINCTRL_SDM845 is not set -CONFIG_PINCTRL_SUNXI=y -# CONFIG_PINCTRL_SUN4I_A10 is not set -# CONFIG_PINCTRL_SUN5I is not set -# CONFIG_PINCTRL_SUN6I_A31 is not set -# CONFIG_PINCTRL_SUN6I_A31_R is not set -# CONFIG_PINCTRL_SUN8I_A23 is not set -# CONFIG_PINCTRL_SUN8I_A33 is not set -# CONFIG_PINCTRL_SUN8I_A83T is not set -# CONFIG_PINCTRL_SUN8I_A83T_R is not set -# CONFIG_PINCTRL_SUN8I_A23_R is not set -# CONFIG_PINCTRL_SUN8I_H3 is not set -CONFIG_PINCTRL_SUN8I_H3_R=y -# CONFIG_PINCTRL_SUN8I_V3S is not set -# CONFIG_PINCTRL_SUN9I_A80 is not set -# CONFIG_PINCTRL_SUN9I_A80_R is not set -CONFIG_PINCTRL_SUN50I_A64=y -CONFIG_PINCTRL_SUN50I_A64_R=y -CONFIG_PINCTRL_SUN50I_H5=y -CONFIG_PINCTRL_SUN50I_H6=y -CONFIG_PINCTRL_SUN50I_H6_R=y -CONFIG_PINCTRL_TEGRA=y -CONFIG_PINCTRL_TEGRA124=y -CONFIG_PINCTRL_TEGRA210=y -CONFIG_PINCTRL_TEGRA_XUSB=y -CONFIG_PINCTRL_MESON=y -CONFIG_PINCTRL_MESON_GXBB=y -CONFIG_PINCTRL_MESON_GXL=y -CONFIG_PINCTRL_MESON8_PMX=y -CONFIG_PINCTRL_MESON_AXG=y -CONFIG_PINCTRL_MESON_AXG_PMX=y -CONFIG_PINCTRL_MESON_G12A=y -CONFIG_PINCTRL_MADERA=m -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_OF_GPIO=y -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=y - -# -# Memory mapped GPIO drivers -# -# CONFIG_GPIO_74XX_MMIO is not set -# CONFIG_GPIO_ALTERA is not set -# CONFIG_GPIO_AMDPT is not set -CONFIG_GPIO_RASPBERRYPI_EXP=m -CONFIG_GPIO_CADENCE=m -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EXAR is not set -# CONFIG_GPIO_FTGPIO010 is not set -CONFIG_GPIO_GENERIC_PLATFORM=y -# CONFIG_GPIO_GRGPIO is not set -# CONFIG_GPIO_HLWD is not set -CONFIG_GPIO_MB86S7X=m -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_MXC=y -CONFIG_GPIO_PL061=y -# CONFIG_GPIO_SAMA5D2_PIOBU is not set -# CONFIG_GPIO_SYSCON is not set -CONFIG_GPIO_TEGRA=y -# CONFIG_GPIO_THUNDERX is not set -CONFIG_GPIO_XGENE=y -CONFIG_GPIO_XGENE_SB=m -# CONFIG_GPIO_XILINX is not set -CONFIG_GPIO_XLP=y -# CONFIG_GPIO_AMD_FCH is not set -# end of Memory mapped GPIO drivers - -# -# I2C GPIO expanders -# -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ADNP is not set -# CONFIG_GPIO_GW_PLD is not set -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_TPIC2810 is not set -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_MAX77620=y -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -# CONFIG_GPIO_PCI_IDIO_16 is not set -# CONFIG_GPIO_PCIE_IDIO_24 is not set -# CONFIG_GPIO_RDC321X is not set -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -# CONFIG_GPIO_74X164 is not set -# CONFIG_GPIO_MAX3191X is not set -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_PISOSR is not set -# CONFIG_GPIO_XRA1403 is not set -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -# CONFIG_W1_MASTER_MATROX is not set -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_MXC=m -# CONFIG_W1_MASTER_DS1WM is not set -CONFIG_W1_MASTER_GPIO=m -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2405=m -CONFIG_W1_SLAVE_DS2408=m -CONFIG_W1_SLAVE_DS2408_READBACK=y -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -CONFIG_W1_SLAVE_DS2438=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_ROCKCHIP_IODOMAIN=m -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_BRCMSTB is not set -# CONFIG_POWER_RESET_GPIO is not set -# CONFIG_POWER_RESET_GPIO_RESTART is not set -CONFIG_POWER_RESET_HISI=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_RESET_QCOM_PON=m -# CONFIG_POWER_RESET_LTC2952 is not set -# CONFIG_POWER_RESET_RESTART is not set -CONFIG_POWER_RESET_VEXPRESS=y -CONFIG_POWER_RESET_XGENE=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_RESET_SYSCON_POWEROFF=y -CONFIG_REBOOT_MODE=m -# CONFIG_SYSCON_REBOOT_MODE is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_GENERIC_ADC_BATTERY is not set -# CONFIG_TEST_POWER is not set -CONFIG_CHARGER_ADP5061=m -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2781 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_LEGO_EV3 is not set -# CONFIG_BATTERY_SBS is not set -# CONFIG_CHARGER_SBS is not set -# CONFIG_MANAGER_SBS is not set -CONFIG_BATTERY_BQ27XXX=m -# CONFIG_BATTERY_BQ27XXX_I2C is not set -CONFIG_BATTERY_BQ27XXX_HDQ=m -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_FUEL_GAUGE=m -# CONFIG_BATTERY_MAX17040 is not set -# CONFIG_BATTERY_MAX17042 is not set -# CONFIG_BATTERY_MAX1721X is not set -# CONFIG_CHARGER_ISP1704 is not set -# CONFIG_CHARGER_MAX8903 is not set -# CONFIG_CHARGER_LP8727 is not set -# CONFIG_CHARGER_GPIO is not set -# CONFIG_CHARGER_MANAGER is not set -# CONFIG_CHARGER_LT3651 is not set -# CONFIG_CHARGER_DETECTOR_MAX14656 is not set -CONFIG_CHARGER_QCOM_SMBB=m -# CONFIG_CHARGER_BQ2415X is not set -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_BQ24257 is not set -# CONFIG_CHARGER_BQ24735 is not set -# CONFIG_CHARGER_BQ25890 is not set -# CONFIG_CHARGER_SMB347 is not set -# CONFIG_BATTERY_GAUGE_LTC2941 is not set -# CONFIG_CHARGER_RT9455 is not set -CONFIG_CHARGER_CROS_USBPD=m -# CONFIG_CHARGER_UCS1002 is not set -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -# CONFIG_SENSORS_AD7314 is not set -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -CONFIG_SENSORS_ADM1029=m -# CONFIG_SENSORS_ADM1031 is not set -CONFIG_SENSORS_ADM9240=m -# CONFIG_SENSORS_ADT7310 is not set -# CONFIG_SENSORS_ADT7410 is not set -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_ARM_SCMI=m -# CONFIG_SENSORS_ASPEED is not set -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DS620=m -# CONFIG_SENSORS_DS1621 is not set -CONFIG_SENSORS_I5K_AMB=m -# CONFIG_SENSORS_F71805F is not set -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_FTSTEUTATES=m -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -CONFIG_SENSORS_G760A=m -# CONFIG_SENSORS_G762 is not set -# CONFIG_SENSORS_GPIO_FAN is not set -# CONFIG_SENSORS_HIH6130 is not set -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -# CONFIG_SENSORS_IIO_HWMON is not set -# CONFIG_SENSORS_IT87 is not set -CONFIG_SENSORS_JC42=m -# CONFIG_SENSORS_POWR1220 is not set -CONFIG_SENSORS_LINEAGE=m -# CONFIG_SENSORS_LTC2945 is not set -# CONFIG_SENSORS_LTC2990 is not set -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -# CONFIG_SENSORS_LTC4222 is not set -CONFIG_SENSORS_LTC4245=m -# CONFIG_SENSORS_LTC4260 is not set -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -# CONFIG_SENSORS_MAX1619 is not set -CONFIG_SENSORS_MAX1668=m -# CONFIG_SENSORS_MAX197 is not set -# CONFIG_SENSORS_MAX31722 is not set -# CONFIG_SENSORS_MAX6621 is not set -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -# CONFIG_SENSORS_MAX6697 is not set -# CONFIG_SENSORS_MAX31790 is not set -# CONFIG_SENSORS_MCP3021 is not set -# CONFIG_SENSORS_TC654 is not set -CONFIG_SENSORS_ADCXX=m -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -CONFIG_SENSORS_LM93=m -# CONFIG_SENSORS_LM95234 is not set -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -# CONFIG_SENSORS_PC87360 is not set -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -# CONFIG_SENSORS_NCT7802 is not set -# CONFIG_SENSORS_NCT7904 is not set -# CONFIG_SENSORS_NPCM7XX is not set -# CONFIG_SENSORS_OCC_P8_I2C is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_PMBUS is not set -# CONFIG_SENSORS_PWM_FAN is not set -CONFIG_SENSORS_RASPBERRYPI_HWMON=m -# CONFIG_SENSORS_SHT15 is not set -CONFIG_SENSORS_SHT21=m -# CONFIG_SENSORS_SHT3x is not set -# CONFIG_SENSORS_SHTC1 is not set -# CONFIG_SENSORS_SIS5595 is not set -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -# CONFIG_SENSORS_SMSC47M1 is not set -CONFIG_SENSORS_SMSC47M192=m -# CONFIG_SENSORS_SMSC47B397 is not set -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -# CONFIG_SENSORS_SCH5636 is not set -# CONFIG_SENSORS_STTS751 is not set -CONFIG_SENSORS_SMM665=m -# CONFIG_SENSORS_ADC128D818 is not set -CONFIG_SENSORS_ADS1015=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -# CONFIG_SENSORS_INA209 is not set -# CONFIG_SENSORS_INA2XX is not set -# CONFIG_SENSORS_INA3221 is not set -# CONFIG_SENSORS_TC74 is not set -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -# CONFIG_SENSORS_TMP103 is not set -# CONFIG_SENSORS_TMP108 is not set -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -# CONFIG_SENSORS_VEXPRESS is not set -# CONFIG_SENSORS_VIA686A is not set -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -# CONFIG_SENSORS_W83773G is not set -# CONFIG_SENSORS_W83781D is not set -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -# CONFIG_SENSORS_W83L785TS is not set -CONFIG_SENSORS_W83L786NG=m -# CONFIG_SENSORS_W83627HF is not set -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_XGENE=m - -# -# ACPI drivers -# -# CONFIG_SENSORS_ACPI_POWER is not set -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -# CONFIG_THERMAL_WRITABLE_TRIPS is not set -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -# CONFIG_THERMAL_GOV_BANG_BANG is not set -# CONFIG_THERMAL_GOV_USER_SPACE is not set -# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -CONFIG_CPU_THERMAL=y -# CONFIG_CLOCK_THERMAL is not set -# CONFIG_DEVFREQ_THERMAL is not set -# CONFIG_THERMAL_EMULATION is not set -# CONFIG_THERMAL_MMIO is not set -CONFIG_HISI_THERMAL=m -CONFIG_IMX_THERMAL=m -# CONFIG_MAX77620_THERMAL is not set -# CONFIG_QORIQ_THERMAL is not set -# CONFIG_ROCKCHIP_THERMAL is not set -CONFIG_ARMADA_THERMAL=m - -# -# Broadcom thermal drivers -# -CONFIG_BCM2835_THERMAL=m -# end of Broadcom thermal drivers - -# -# NVIDIA Tegra thermal drivers -# -CONFIG_TEGRA_SOCTHERM=y -# CONFIG_TEGRA_BPMP_THERMAL is not set -# end of NVIDIA Tegra thermal drivers - -# CONFIG_GENERIC_ADC_THERMAL is not set - -# -# Qualcomm thermal drivers -# -CONFIG_QCOM_TSENS=m -CONFIG_QCOM_SPMI_TEMP_ALARM=m -# end of Qualcomm thermal drivers - -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_GPIO_WATCHDOG=m -# CONFIG_WDAT_WDT is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_ZIIRAVE_WATCHDOG is not set -CONFIG_ARM_SP805_WATCHDOG=m -CONFIG_ARM_SBSA_WATCHDOG=m -# CONFIG_ARMADA_37XX_WATCHDOG is not set -# CONFIG_CADENCE_WATCHDOG is not set -CONFIG_DW_WATCHDOG=m -CONFIG_SUNXI_WATCHDOG=m -# CONFIG_MAX63XX_WATCHDOG is not set -# CONFIG_MAX77620_WATCHDOG is not set -CONFIG_IMX2_WDT=m -CONFIG_IMX_SC_WDT=m -CONFIG_TEGRA_WATCHDOG=m -CONFIG_QCOM_WDT=m -CONFIG_MESON_GXBB_WATCHDOG=m -CONFIG_MESON_WATCHDOG=m -CONFIG_PM8916_WATCHDOG=m -# CONFIG_ALIM7101_WDT is not set -# CONFIG_I6300ESB_WDT is not set -CONFIG_BCM2835_WDT=m -# CONFIG_MEN_A21_WDT is not set -CONFIG_XEN_WDT=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -# CONFIG_SSB_DRIVER_GPIO is not set -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -# CONFIG_BCMA_HOST_SOC is not set -CONFIG_BCMA_DRIVER_PCI=y -# CONFIG_BCMA_DRIVER_GMAC_CMN is not set -# CONFIG_BCMA_DRIVER_GPIO is not set -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -# CONFIG_MFD_ACT8945A is not set -# CONFIG_MFD_SUN4I_GPADC is not set -# CONFIG_MFD_AS3711 is not set -# CONFIG_MFD_AS3722 is not set -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_ATMEL_FLEXCOM is not set -# CONFIG_MFD_ATMEL_HLCDC is not set -# CONFIG_MFD_BCM590XX is not set -# CONFIG_MFD_BD9571MWV is not set -# CONFIG_MFD_AC100 is not set -CONFIG_MFD_AXP20X=m -# CONFIG_MFD_AXP20X_I2C is not set -CONFIG_MFD_AXP20X_RSB=m -CONFIG_MFD_CROS_EC=y -# CONFIG_MFD_CROS_EC_CHARDEV is not set -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_DA9052_SPI is not set -# CONFIG_MFD_DA9052_I2C is not set -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9062 is not set -# CONFIG_MFD_DA9063 is not set -# CONFIG_MFD_DA9150 is not set -# CONFIG_MFD_DLN2 is not set -# CONFIG_MFD_MC13XXX_SPI is not set -# CONFIG_MFD_MC13XXX_I2C is not set -# CONFIG_MFD_HI6421_PMIC is not set -CONFIG_MFD_HI655X_PMIC=m -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_LPC_ICH is not set -CONFIG_LPC_SCH=m -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set -CONFIG_MFD_MAX77620=y -# CONFIG_MFD_MAX77650 is not set -# CONFIG_MFD_MAX77686 is not set -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX77843 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_MFD_MT6397 is not set -# CONFIG_MFD_MENF21BMC is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_MFD_CPCAP is not set -CONFIG_MFD_VIPERBOARD=m -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_UCB1400_CORE is not set -CONFIG_MFD_QCOM_RPM=m -CONFIG_MFD_SPMI_PMIC=m -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RT5033 is not set -# CONFIG_MFD_RC5T583 is not set -CONFIG_MFD_RK808=m -# CONFIG_MFD_RN5T618 is not set -# CONFIG_MFD_SEC_CORE is not set -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SKY81452 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_ABX500_CORE is not set -# CONFIG_MFD_STMPE is not set -CONFIG_MFD_SUN6I_PRCM=y -CONFIG_MFD_SYSCON=y -# CONFIG_MFD_TI_AM335X_TSCADC is not set -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_TI_LMU is not set -# CONFIG_MFD_PALMAS is not set -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65086 is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TI_LP873X is not set -# CONFIG_MFD_TI_LP87565 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_TWL6040_CORE is not set -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_TQMX86 is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_LOCHNAGAR is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set -CONFIG_MFD_ROHM_BD718XX=m -# CONFIG_MFD_STPMIC1 is not set -# CONFIG_MFD_STMFX is not set -CONFIG_MFD_VEXPRESS_SYSREG=y -# CONFIG_RAVE_SP_CORE is not set -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_88PG86X is not set -# CONFIG_REGULATOR_ACT8865 is not set -# CONFIG_REGULATOR_AD5398 is not set -# CONFIG_REGULATOR_ANATOP is not set -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BD718XX=m -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_DA9211 is not set -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_HI655X=m -# CONFIG_REGULATOR_ISL9305 is not set -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_LTC3676 is not set -# CONFIG_REGULATOR_MAX1586 is not set -CONFIG_REGULATOR_MAX77620=m -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -# CONFIG_REGULATOR_MCP16502 is not set -# CONFIG_REGULATOR_MT6311 is not set -# CONFIG_REGULATOR_PFUZE100 is not set -# CONFIG_REGULATOR_PV88060 is not set -# CONFIG_REGULATOR_PV88080 is not set -# CONFIG_REGULATOR_PV88090 is not set -CONFIG_REGULATOR_PWM=m -CONFIG_REGULATOR_QCOM_RPM=m -CONFIG_REGULATOR_QCOM_SMD_RPM=m -CONFIG_REGULATOR_QCOM_SPMI=m -CONFIG_REGULATOR_RK808=m -CONFIG_REGULATOR_SY8106A=m -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS65132 is not set -# CONFIG_REGULATOR_TPS6524X is not set -# CONFIG_REGULATOR_VCTRL is not set -# CONFIG_REGULATOR_VEXPRESS is not set -CONFIG_CEC_CORE=m -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_LIRC=y -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -# CONFIG_IR_HIX5HD2 is not set -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -# CONFIG_IR_ITE_CIR is not set -# CONFIG_IR_FINTEK is not set -# CONFIG_IR_MESON is not set -# CONFIG_IR_NUVOTON is not set -CONFIG_IR_REDRAT3=m -# CONFIG_IR_SPI is not set -CONFIG_IR_STREAMZAP=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -# CONFIG_IR_GPIO_CIR is not set -# CONFIG_IR_GPIO_TX is not set -# CONFIG_IR_PWM_TX is not set -# CONFIG_IR_SUNXI is not set -# CONFIG_IR_SERIAL is not set -# CONFIG_IR_SIR is not set -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -CONFIG_VIDEO_DEV=m -# CONFIG_VIDEO_V4L2_SUBDEV_API is not set -CONFIG_VIDEO_V4L2=m -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=m -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=16 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -# CONFIG_VIDEO_TM6000 is not set - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -# CONFIG_DVB_USB_ZD1301 is not set -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -# CONFIG_VIDEO_CX25821 is not set -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -# CONFIG_VIDEO_SAA7134_GO7007 is not set -CONFIG_VIDEO_SAA7164=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_CADENCE=y -# CONFIG_VIDEO_ASPEED is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_CODA=m -CONFIG_VIDEO_IMX_PXP=m -# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set -# CONFIG_VIDEO_SH_VEU is not set -# CONFIG_VIDEO_ROCKCHIP_RGA is not set -CONFIG_VIDEO_QCOM_VENUS=m -CONFIG_V4L_TEST_DRIVERS=y -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -# CONFIG_VIDEO_VIM2M is not set -# CONFIG_VIDEO_VICODEC is not set -# CONFIG_DVB_PLATFORM_DRIVERS is not set -# CONFIG_CEC_PLATFORM_DRIVERS is not set -# CONFIG_SDR_PLATFORM_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=m -CONFIG_USB_SI470X=m -# CONFIG_I2C_SI470X is not set -# CONFIG_RADIO_SI4713 is not set -CONFIG_USB_MR800=m -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_MAXIRADIO is not set -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -# CONFIG_RADIO_TEA5764 is not set -# CONFIG_RADIO_SAA7706H is not set -# CONFIG_RADIO_TEF6862 is not set -# CONFIG_RADIO_WL1273 is not set - -# -# Texas Instruments WL128x FM driver (ST based) -# -# CONFIG_RADIO_WL128X is not set -# end of Texas Instruments WL128x FM driver (ST based) - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -# CONFIG_SMS_SIANO_DEBUGFS is not set -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_MT9V011=m - -# -# Lens drivers -# - -# -# Flash devices -# - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_M52790=m - -# -# Media SPI Adapters -# -CONFIG_CXD2880_SPI_DRV=m -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_GP8PSK_FE=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_TEGRA_HOST1X=m -CONFIG_TEGRA_HOST1X_FIREWALL=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DSI=y -CONFIG_DRM_DP_AUX_CHARDEV=y -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_VM=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set -# CONFIG_DRM_I2C_NXP_TDA998X is not set -# CONFIG_DRM_I2C_NXP_TDA9950 is not set -# end of I2C encoder or helper chips - -# -# ARM devices -# -CONFIG_DRM_HDLCD=m -# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set -CONFIG_DRM_MALI_DISPLAY=m -CONFIG_DRM_KOMEDA=m -# end of ARM devices - -CONFIG_DRM_RADEON=m -# CONFIG_DRM_RADEON_USERPTR is not set -CONFIG_DRM_AMDGPU=m -CONFIG_DRM_AMDGPU_SI=y -CONFIG_DRM_AMDGPU_CIK=y -CONFIG_DRM_AMDGPU_USERPTR=y -# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# CONFIG_DRM_AMD_ACP is not set -# end of ACP (Audio CoProcessor) Configuration - -# -# Display Engine Configuration -# -CONFIG_DRM_AMD_DC=y -# CONFIG_DEBUG_KERNEL_DC is not set -# end of Display Engine Configuration - -# CONFIG_HSA_AMD is not set -CONFIG_DRM_NOUVEAU=m -# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set -CONFIG_NOUVEAU_PLATFORM_DRIVER=y -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -# CONFIG_NOUVEAU_DEBUG_MMU is not set -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_ATI_PCIGART=y -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -# CONFIG_DRM_RCAR_DW_HDMI is not set -# CONFIG_DRM_RCAR_LVDS is not set -CONFIG_DRM_RCAR_WRITEBACK=y -# CONFIG_DRM_SUN4I is not set -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_MSM=m -CONFIG_DRM_MSM_GPU_STATE=y -# CONFIG_DRM_MSM_REGISTER_LOGGING is not set -# CONFIG_DRM_MSM_GPU_SUDO is not set -CONFIG_DRM_MSM_HDMI_HDCP=y -CONFIG_DRM_MSM_DSI=y -CONFIG_DRM_MSM_DSI_PLL=y -CONFIG_DRM_MSM_DSI_28NM_PHY=y -CONFIG_DRM_MSM_DSI_20NM_PHY=y -CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y -CONFIG_DRM_MSM_DSI_14NM_PHY=y -CONFIG_DRM_MSM_DSI_10NM_PHY=y -CONFIG_DRM_TEGRA=m -# CONFIG_DRM_TEGRA_DEBUG is not set -CONFIG_DRM_TEGRA_STAGING=y -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_PANEL_ARM_VERSATILE=m -# CONFIG_DRM_PANEL_LVDS is not set -CONFIG_DRM_PANEL_SIMPLE=m -# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set -# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set -# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set -# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set -# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set -# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set -# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set -# CONFIG_DRM_PANEL_LG_LG4573 is not set -# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set -# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set -# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set -# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set -# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set -# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set -# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set -# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set -# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set -# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set -# CONFIG_DRM_PANEL_TPO_TPG110 is not set -# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -# CONFIG_DRM_ANALOGIX_ANX78XX is not set -CONFIG_DRM_CDNS_DSI=m -# CONFIG_DRM_DUMB_VGA_DAC is not set -# CONFIG_DRM_LVDS_ENCODER is not set -# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set -# CONFIG_DRM_NXP_PTN3460 is not set -# CONFIG_DRM_PARADE_PS8622 is not set -# CONFIG_DRM_SIL_SII8620 is not set -# CONFIG_DRM_SII902X is not set -# CONFIG_DRM_SII9234 is not set -# CONFIG_DRM_THINE_THC63LVD1024 is not set -# CONFIG_DRM_TOSHIBA_TC358764 is not set -# CONFIG_DRM_TOSHIBA_TC358767 is not set -# CONFIG_DRM_TI_TFP410 is not set -# CONFIG_DRM_TI_SN65DSI86 is not set -CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_I2C_ADV7511_AUDIO=y -CONFIG_DRM_I2C_ADV7533=y -CONFIG_DRM_I2C_ADV7511_CEC=y -CONFIG_DRM_DW_HDMI=m -# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set -# CONFIG_DRM_DW_HDMI_I2S_AUDIO is not set -# CONFIG_DRM_DW_HDMI_CEC is not set -# end of Display Interface Bridges - -CONFIG_DRM_VC4=m -# CONFIG_DRM_VC4_HDMI_CEC is not set -CONFIG_DRM_ETNAVIV=m -CONFIG_DRM_ETNAVIV_THERMAL=y -# CONFIG_DRM_ARCPGU is not set -CONFIG_DRM_HISI_HIBMC=m -CONFIG_DRM_HISI_KIRIN=m -CONFIG_HISI_KIRIN_DW_DSI=m -# CONFIG_DRM_MXSFB is not set -CONFIG_DRM_MESON=m -CONFIG_DRM_MESON_DW_HDMI=m -# CONFIG_DRM_TINYDRM is not set -# CONFIG_DRM_PL111 is not set -# CONFIG_DRM_XEN is not set -CONFIG_DRM_LIMA=m -CONFIG_DRM_PANFROST=m -CONFIG_DRM_LEGACY=y -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_MGA is not set -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_SVGALIB=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -CONFIG_FB_ARMCLCD=y -CONFIG_FB_IMX=m -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_UVESA is not set -CONFIG_FB_EFI=y -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I740 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -CONFIG_FB_3DFX_I2C=y -# CONFIG_FB_VOODOO1 is not set -CONFIG_FB_VT8623=m -# CONFIG_FB_TRIDENT is not set -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -# CONFIG_FB_CARMINE is not set -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -# CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=y -# CONFIG_FB_METRONOME is not set -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -# CONFIG_FB_MX3 is not set -# CONFIG_FB_MXS is not set -CONFIG_FB_SIMPLE=y -# CONFIG_FB_SSD1307 is not set -# CONFIG_FB_SM712 is not set -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_L4F00242T03=m -CONFIG_LCD_LMS283GF05=m -CONFIG_LCD_LTV350QV=m -CONFIG_LCD_ILI922X=m -CONFIG_LCD_ILI9320=m -CONFIG_LCD_TDO24M=m -CONFIG_LCD_VGG2432A4=m -CONFIG_LCD_PLATFORM=m -CONFIG_LCD_AMS369FG06=m -CONFIG_LCD_LMS501KF03=m -CONFIG_LCD_HX8357=m -CONFIG_LCD_OTM3225A=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_PWM=m -# CONFIG_BACKLIGHT_PM8941_WLED is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -CONFIG_BACKLIGHT_LP855X=m -# CONFIG_BACKLIGHT_GPIO is not set -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_BACKLIGHT_ARCXCNN is not set -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -# CONFIG_LOGO is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_COMPRESS_OFFLOAD=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -CONFIG_SND_ALOOP=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -CONFIG_SND_MTS64=m -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDSP is not set -CONFIG_SND_HDSPM=m -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -CONFIG_SND_VIRTUOSO=m -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_TEGRA=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=1 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_PREALLOC_SIZE=2048 -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -# CONFIG_SND_FIREWIRE_MOTU is not set -# CONFIG_SND_FIREFACE is not set -CONFIG_SND_SOC=m -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_COMPRESS=y -# CONFIG_SND_SOC_AMD_ACP is not set -# CONFIG_SND_ATMEL_SOC is not set -CONFIG_SND_BCM2835_SOC_I2S=m -# CONFIG_SND_DESIGNWARE_I2S is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -# CONFIG_SND_SOC_FSL_ASRC is not set -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -CONFIG_SND_SOC_FSL_ESAI=m -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_IMX_PCM_DMA=m -CONFIG_SND_SOC_IMX_AUDMUX=m -CONFIG_SND_IMX_SOC=m - -# -# SoC Audio support for Freescale i.MX boards: -# -CONFIG_SND_SOC_IMX_ES8328=m -CONFIG_SND_SOC_IMX_SGTL5000=m -CONFIG_SND_SOC_IMX_SPDIF=m -CONFIG_SND_SOC_FSL_ASOC_CARD=m -CONFIG_SND_SOC_IMX_AUDMIX=m -# end of SoC Audio for Freescale CPUs - -CONFIG_SND_I2S_HI6210_I2S=m -# CONFIG_SND_KIRKWOOD_SOC is not set -# CONFIG_SND_SOC_IMG is not set -# CONFIG_SND_SOC_MTK_BTCVSD is not set - -# -# ASoC support for Amlogic platforms -# -# CONFIG_SND_MESON_AXG_FRDDR is not set -# CONFIG_SND_MESON_AXG_TODDR is not set -# CONFIG_SND_MESON_AXG_TDMIN is not set -# CONFIG_SND_MESON_AXG_TDMOUT is not set -# CONFIG_SND_MESON_AXG_SOUND_CARD is not set -# CONFIG_SND_MESON_AXG_SPDIFOUT is not set -# CONFIG_SND_MESON_AXG_SPDIFIN is not set -# CONFIG_SND_MESON_AXG_PDM is not set -# end of ASoC support for Amlogic platforms - -CONFIG_SND_SOC_QCOM=m -CONFIG_SND_SOC_LPASS_CPU=m -CONFIG_SND_SOC_LPASS_PLATFORM=m -CONFIG_SND_SOC_LPASS_APQ8016=m -# CONFIG_SND_SOC_STORM is not set -CONFIG_SND_SOC_APQ8016_SBC=m -CONFIG_SND_SOC_QCOM_COMMON=m -CONFIG_SND_SOC_QDSP6_COMMON=m -CONFIG_SND_SOC_QDSP6_CORE=m -CONFIG_SND_SOC_QDSP6_AFE=m -CONFIG_SND_SOC_QDSP6_AFE_DAI=m -CONFIG_SND_SOC_QDSP6_ADM=m -CONFIG_SND_SOC_QDSP6_ROUTING=m -CONFIG_SND_SOC_QDSP6_ASM=m -CONFIG_SND_SOC_QDSP6_ASM_DAI=m -CONFIG_SND_SOC_QDSP6=m -CONFIG_SND_SOC_MSM8996=m -CONFIG_SND_SOC_SDM845=m -# CONFIG_SND_SOC_ROCKCHIP is not set -# CONFIG_SND_SOC_SOF_TOPLEVEL is not set - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -# -# Allwinner SoC Audio support -# -# CONFIG_SND_SUN4I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC is not set -# CONFIG_SND_SUN8I_CODEC_ANALOG is not set -# CONFIG_SND_SUN50I_CODEC_ANALOG is not set -# CONFIG_SND_SUN4I_I2S is not set -# CONFIG_SND_SUN4I_SPDIF is not set -# end of Allwinner SoC Audio support - -CONFIG_SND_SOC_TEGRA=m -# CONFIG_SND_SOC_TEGRA20_AC97 is not set -# CONFIG_SND_SOC_TEGRA20_DAS is not set -# CONFIG_SND_SOC_TEGRA20_I2S is not set -CONFIG_SND_SOC_TEGRA20_SPDIF=m -# CONFIG_SND_SOC_TEGRA30_AHUB is not set -# CONFIG_SND_SOC_TEGRA30_I2S is not set -CONFIG_SND_SOC_TEGRA_RT5640=m -CONFIG_SND_SOC_TEGRA_WM8753=m -CONFIG_SND_SOC_TEGRA_WM8903=m -# CONFIG_SND_SOC_TEGRA_WM9712 is not set -CONFIG_SND_SOC_TEGRA_TRIMSLICE=m -CONFIG_SND_SOC_TEGRA_ALC5632=m -CONFIG_SND_SOC_TEGRA_MAX98090=m -CONFIG_SND_SOC_TEGRA_RT5677=m -# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set -CONFIG_SND_SOC_XILINX_I2S=m -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -# CONFIG_SND_SOC_XTFPGA_I2S is not set -# CONFIG_ZX_TDM is not set -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_ADAU1761_I2C is not set -# CONFIG_SND_SOC_ADAU1761_SPI is not set -# CONFIG_SND_SOC_ADAU7002 is not set -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4118 is not set -# CONFIG_SND_SOC_AK4458 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4613 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_AK5558 is not set -# CONFIG_SND_SOC_ALC5623 is not set -CONFIG_SND_SOC_ALC5632=m -# CONFIG_SND_SOC_BD28623 is not set -# CONFIG_SND_SOC_BT_SCO is not set -CONFIG_SND_SOC_CROS_EC_CODEC=m -# CONFIG_SND_SOC_CS35L32 is not set -# CONFIG_SND_SOC_CS35L33 is not set -# CONFIG_SND_SOC_CS35L34 is not set -# CONFIG_SND_SOC_CS35L35 is not set -# CONFIG_SND_SOC_CS35L36 is not set -# CONFIG_SND_SOC_CS42L42 is not set -# CONFIG_SND_SOC_CS42L51_I2C is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4265 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271_I2C is not set -# CONFIG_SND_SOC_CS4271_SPI is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_CS43130 is not set -# CONFIG_SND_SOC_CS4341 is not set -# CONFIG_SND_SOC_CS4349 is not set -# CONFIG_SND_SOC_CS53L30 is not set -# CONFIG_SND_SOC_DMIC is not set -CONFIG_SND_SOC_HDMI_CODEC=m -# CONFIG_SND_SOC_ES7134 is not set -# CONFIG_SND_SOC_ES7241 is not set -# CONFIG_SND_SOC_ES8316 is not set -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -# CONFIG_SND_SOC_GTM601 is not set -# CONFIG_SND_SOC_INNO_RK3036 is not set -# CONFIG_SND_SOC_MAX98088 is not set -CONFIG_SND_SOC_MAX98090=m -# CONFIG_SND_SOC_MAX98504 is not set -# CONFIG_SND_SOC_MAX9867 is not set -CONFIG_SND_SOC_MAX98927=m -# CONFIG_SND_SOC_MAX98373 is not set -# CONFIG_SND_SOC_MAX9860 is not set -# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set -# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1789_I2C is not set -# CONFIG_SND_SOC_PCM179X_I2C is not set -# CONFIG_SND_SOC_PCM179X_SPI is not set -# CONFIG_SND_SOC_PCM186X_I2C is not set -# CONFIG_SND_SOC_PCM186X_SPI is not set -# CONFIG_SND_SOC_PCM3060_I2C is not set -# CONFIG_SND_SOC_PCM3060_SPI is not set -# CONFIG_SND_SOC_PCM3168A_I2C is not set -# CONFIG_SND_SOC_PCM3168A_SPI is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -CONFIG_SND_SOC_RK3328=m -CONFIG_SND_SOC_RL6231=m -# CONFIG_SND_SOC_RT5616 is not set -# CONFIG_SND_SOC_RT5631 is not set -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5663=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_SGTL5000=m -# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_SSM2305 is not set -# CONFIG_SND_SOC_SSM2602_SPI is not set -# CONFIG_SND_SOC_SSM2602_I2C is not set -# CONFIG_SND_SOC_SSM4567 is not set -# CONFIG_SND_SOC_STA32X is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_STI_SAS is not set -# CONFIG_SND_SOC_TAS2552 is not set -# CONFIG_SND_SOC_TAS5086 is not set -# CONFIG_SND_SOC_TAS571X is not set -# CONFIG_SND_SOC_TAS5720 is not set -# CONFIG_SND_SOC_TAS6424 is not set -# CONFIG_SND_SOC_TDA7419 is not set -# CONFIG_SND_SOC_TFA9879 is not set -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -# CONFIG_SND_SOC_TLV320AIC23_SPI is not set -# CONFIG_SND_SOC_TLV320AIC31XX is not set -# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set -# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set -# CONFIG_SND_SOC_TLV320AIC3X is not set -# CONFIG_SND_SOC_TS3A227E is not set -# CONFIG_SND_SOC_TSCS42XX is not set -# CONFIG_SND_SOC_TSCS454 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8524 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -CONFIG_SND_SOC_WM8753=m -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8782 is not set -# CONFIG_SND_SOC_WM8804_I2C is not set -# CONFIG_SND_SOC_WM8804_SPI is not set -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8962 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8978 is not set -# CONFIG_SND_SOC_WM8985 is not set -# CONFIG_SND_SOC_ZX_AUD96P22 is not set -# CONFIG_SND_SOC_MAX9759 is not set -# CONFIG_SND_SOC_MT6351 is not set -# CONFIG_SND_SOC_MT6358 is not set -# CONFIG_SND_SOC_NAU8540 is not set -# CONFIG_SND_SOC_NAU8810 is not set -# CONFIG_SND_SOC_NAU8822 is not set -# CONFIG_SND_SOC_NAU8824 is not set -# CONFIG_SND_SOC_TPA6130A2 is not set -# end of CODEC drivers - -# CONFIG_SND_SIMPLE_CARD is not set -# CONFIG_SND_AUDIO_GRAPH_CARD is not set -# CONFIG_SND_XEN_FRONTEND is not set -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -# CONFIG_HID_ACCUTOUCH is not set -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -# CONFIG_HID_APPLEIR is not set -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -# CONFIG_HID_BIGBEN_FF is not set -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -# CONFIG_HID_ELAN is not set -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -# CONFIG_HID_GFRM is not set -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -# CONFIG_HID_GOOGLE_HAMMER is not set -# CONFIG_HID_GT683R is not set -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -# CONFIG_HID_VIEWSONIC is not set -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -# CONFIG_HID_ITE is not set -# CONFIG_HID_JABRA is not set -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MALTRON=m -# CONFIG_HID_MAYFLASH is not set -# CONFIG_HID_REDRAGON is not set -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -# CONFIG_HID_NTI is not set -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -# CONFIG_HID_PICOLCD_LCD is not set -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -# CONFIG_HID_RETRODE is not set -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -# CONFIG_HID_STEAM is not set -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -# CONFIG_HID_UDRAW_PS3 is not set -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -# CONFIG_I2C_HID is not set -# end of I2C HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=m -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_XHCI_HCD=m -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=m -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_XHCI_HISTB=m -# CONFIG_USB_XHCI_MVEBU is not set -CONFIG_USB_XHCI_TEGRA=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=m -CONFIG_USB_EHCI_FSL=m -CONFIG_USB_EHCI_MXC=m -CONFIG_USB_EHCI_HCD_ORION=m -CONFIG_USB_EHCI_TEGRA=m -CONFIG_USB_EHCI_HCD_PLATFORM=m -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_MAX3421_HCD is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PCI=m -# CONFIG_USB_OHCI_HCD_SSB is not set -CONFIG_USB_OHCI_HCD_PLATFORM=m -# CONFIG_USB_UHCI_HCD is not set -CONFIG_USB_U132_HCD=m -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m -# CONFIG_USB_HCD_BCMA is not set -# CONFIG_USB_HCD_SSB is not set -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=15 -CONFIG_USBIP_VHCI_NR_HCS=8 -CONFIG_USBIP_HOST=m -CONFIG_USBIP_VUDC=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# -CONFIG_USB_MUSB_SUNXI=m - -# -# MUSB DMA mode -# -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_DWC3=m -# CONFIG_USB_DWC3_ULPI is not set -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC3_MESON_G12A=m -CONFIG_USB_DWC3_OF_SIMPLE=m -CONFIG_USB_DWC3_QCOM=m -CONFIG_USB_DWC2=m -# CONFIG_USB_DWC2_HOST is not set - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y -# CONFIG_USB_DWC2_PCI is not set -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_OF=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1761_UDC=y -# CONFIG_USB_ISP1760_HOST_ROLE is not set -# CONFIG_USB_ISP1760_GADGET_ROLE is not set -CONFIG_USB_ISP1760_DUAL_ROLE=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -# CONFIG_USB_SERIAL_F8153X is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -# CONFIG_USB_SERIAL_UPD78F0730 is not set -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -# CONFIG_USB_HUB_USB251XB is not set -CONFIG_USB_HSIC_USB3503=m -# CONFIG_USB_HSIC_USB4604 is not set -# CONFIG_USB_LINK_LAYER_TEST is not set -CONFIG_USB_CHAOSKEY=m -# CONFIG_USB_ATM is not set - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ISP1301 is not set -CONFIG_USB_MXS_PHY=m -CONFIG_USB_TEGRA_PHY=m -CONFIG_USB_ULPI=y -CONFIG_USB_ULPI_VIEWPORT=y -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -CONFIG_USB_FSL_USB2=m -# CONFIG_USB_FOTG210_UDC is not set -# CONFIG_USB_GR_UDC is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_MV_U3D is not set -# CONFIG_USB_SNP_UDC_PLAT is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_BDC_UDC is not set -# CONFIG_USB_AMD5536UDC is not set -# CONFIG_USB_NET2272 is not set -CONFIG_USB_NET2280=m -# CONFIG_USB_GOKU is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_GADGET_XILINX is not set -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_G_NCM is not set -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -# CONFIG_USB_MASS_STORAGE is not set -# CONFIG_USB_GADGET_TARGET is not set -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_G_NOKIA is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set -# CONFIG_TYPEC is not set -CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m -CONFIG_MMC=y -CONFIG_PWRSEQ_EMMC=y -# CONFIG_PWRSEQ_SD8787 is not set -CONFIG_PWRSEQ_SIMPLE=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=256 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_ARMMMCI=m -CONFIG_MMC_QCOM_DML=y -CONFIG_MMC_STM32_SDMMC=y -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_SDHCI_OF_ARASAN=m -# CONFIG_MMC_SDHCI_OF_AT91 is not set -CONFIG_MMC_SDHCI_OF_ESDHC=m -# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set -# CONFIG_MMC_SDHCI_CADENCE is not set -CONFIG_MMC_SDHCI_ESDHC_IMX=m -CONFIG_MMC_SDHCI_TEGRA=m -# CONFIG_MMC_SDHCI_PXAV3 is not set -CONFIG_MMC_SDHCI_F_SDH30=m -CONFIG_MMC_SDHCI_IPROC=m -CONFIG_MMC_MESON_GX=m -# CONFIG_MMC_MESON_MX_SDIO is not set -CONFIG_MMC_ALCOR=m -CONFIG_MMC_SDHCI_MSM=m -CONFIG_MMC_MXC=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_DW=m -CONFIG_MMC_DW_PLTFM=m -# CONFIG_MMC_DW_BLUEFIELD is not set -# CONFIG_MMC_DW_EXYNOS is not set -# CONFIG_MMC_DW_HI3798CV200 is not set -CONFIG_MMC_DW_K3=m -# CONFIG_MMC_DW_PCI is not set -CONFIG_MMC_DW_ROCKCHIP=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -# CONFIG_MMC_USDHI6ROL0 is not set -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_SUNXI=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_BCM2835=m -# CONFIG_MMC_MTK is not set -CONFIG_MMC_SDHCI_XENON=m -# CONFIG_MMC_SDHCI_OMAP is not set -CONFIG_MMC_SDHCI_AM654=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -# CONFIG_MS_BLOCK is not set - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -# CONFIG_LEDS_CLASS_FLASH is not set -CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y - -# -# LED drivers -# -# CONFIG_LEDS_AN30259A is not set -# CONFIG_LEDS_BCM6328 is not set -# CONFIG_LEDS_BCM6358 is not set -# CONFIG_LEDS_CR0014114 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3532 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_LM3692X is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -# CONFIG_LEDS_LP3952 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -# CONFIG_LEDS_PCA963X is not set -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_LT3593=m -# CONFIG_LEDS_TCA6507 is not set -# CONFIG_LEDS_TLC591XX is not set -# CONFIG_LEDS_LM355x is not set -# CONFIG_LEDS_IS31FL319X is not set -# CONFIG_LEDS_IS31FL32XX is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set -# CONFIG_LEDS_SYSCON is not set -# CONFIG_LEDS_MLXREG is not set -# CONFIG_LEDS_USER is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -CONFIG_LEDS_TRIGGER_MTD=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -# CONFIG_LEDS_TRIGGER_ACTIVITY is not set -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -# CONFIG_LEDS_TRIGGER_NETDEV is not set -# CONFIG_LEDS_TRIGGER_PATTERN is not set -CONFIG_LEDS_TRIGGER_AUDIO=m -CONFIG_ACCESSIBILITY=y -CONFIG_A11Y_BRAILLE_CONSOLE=y -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -CONFIG_INFINIBAND_MTHCA_DEBUG=y -CONFIG_INFINIBAND_CXGB3=m -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_EFA=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set -CONFIG_INFINIBAND_OCRDMA=m -# CONFIG_INFINIBAND_HNS is not set -# CONFIG_INFINIBAND_BNXT_RE is not set -CONFIG_INFINIBAND_QEDR=m -CONFIG_RDMA_RXE=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -CONFIG_EDAC_LEGACY_SYSFS=y -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_THUNDERX=m -CONFIG_EDAC_XGENE=m -# CONFIG_EDAC_QCOM is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_ABB5ZES3 is not set -# CONFIG_RTC_DRV_ABEOZ9 is not set -# CONFIG_RTC_DRV_ABX80X is not set -CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -CONFIG_RTC_DRV_MAX77686=y -CONFIG_RTC_DRV_RK808=m -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12026 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8523 is not set -# CONFIG_RTC_DRV_PCF85063 is not set -# CONFIG_RTC_DRV_PCF85363 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8010 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3028 is not set -# CONFIG_RTC_DRV_RV8803 is not set -# CONFIG_RTC_DRV_SD3078 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1302 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6916 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_RX6110 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_MCP795 is not set -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1685_FAMILY is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DS2404 is not set -CONFIG_RTC_DRV_EFI=y -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_ZYNQMP is not set -# CONFIG_RTC_DRV_CROS_EC is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_IMXDI=m -# CONFIG_RTC_DRV_PL030 is not set -CONFIG_RTC_DRV_PL031=y -CONFIG_RTC_DRV_SUN6I=y -CONFIG_RTC_DRV_MV=m -CONFIG_RTC_DRV_ARMADA38X=m -CONFIG_RTC_DRV_CADENCE=m -# CONFIG_RTC_DRV_FTRTC010 is not set -CONFIG_RTC_DRV_PM8XXX=m -CONFIG_RTC_DRV_TEGRA=y -CONFIG_RTC_DRV_MXC=m -CONFIG_RTC_DRV_MXC_V2=m -# CONFIG_RTC_DRV_SNVS is not set -CONFIG_RTC_DRV_IMX_SC=m -CONFIG_RTC_DRV_XGENE=y -# CONFIG_RTC_DRV_R7301 is not set - -# -# HID Sensor RTC drivers -# -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DMA_ACPI=y -CONFIG_DMA_OF=y -# CONFIG_ALTERA_MSGDMA is not set -# CONFIG_AMBA_PL08X is not set -# CONFIG_BCM_SBA_RAID is not set -CONFIG_DMA_BCM2835=y -CONFIG_DMA_SUN6I=m -# CONFIG_DW_AXI_DMAC is not set -# CONFIG_FSL_EDMA is not set -CONFIG_FSL_QDMA=m -CONFIG_IMX_DMA=m -CONFIG_IMX_SDMA=m -# CONFIG_INTEL_IDMA64 is not set -CONFIG_K3_DMA=m -CONFIG_MV_XOR=y -CONFIG_MV_XOR_V2=y -# CONFIG_MXS_DMA is not set -CONFIG_MX3_IPU=y -CONFIG_MX3_IPU_IRQS=4 -CONFIG_PL330_DMA=m -CONFIG_TEGRA20_APB_DMA=y -CONFIG_TEGRA210_ADMA=y -CONFIG_XGENE_DMA=m -# CONFIG_XILINX_DMA is not set -# CONFIG_XILINX_ZYNQMP_DMA is not set -CONFIG_QCOM_BAM_DMA=m -CONFIG_QCOM_HIDMA_MGMT=m -CONFIG_QCOM_HIDMA=m -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set -CONFIG_DMA_ENGINE_RAID=y - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# end of DMABUF options - -# CONFIG_AUXDISPLAY is not set -# CONFIG_PANEL is not set -CONFIG_UIO=m -CONFIG_UIO_CIF=m -# CONFIG_UIO_PDRV_GENIRQ is not set -# CONFIG_UIO_DMEM_GENIRQ is not set -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -# CONFIG_UIO_PRUSS is not set -CONFIG_UIO_MF624=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -CONFIG_VFIO_NOIOMMU=y -CONFIG_VFIO_PCI=m -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -# CONFIG_VFIO_PLATFORM is not set -# CONFIG_VFIO_MDEV is not set -CONFIG_VIRT_DRIVERS=y -CONFIG_VIRTIO=m -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=m -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_BALLOON=m -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=m -# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set - -# -# Microsoft Hyper-V guest support -# -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -# CONFIG_XEN_PVCALLS_FRONTEND is not set -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_EFI=y -CONFIG_XEN_AUTO_XLATE=y -# end of Xen driver support - -CONFIG_STAGING=y -# CONFIG_PRISM2_USB is not set -# CONFIG_COMEDI is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTLLIB is not set -CONFIG_RTL8723BS=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -# CONFIG_RTS5208 is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set - -# -# IIO staging drivers -# - -# -# Accelerometers -# -# CONFIG_ADIS16203 is not set -# CONFIG_ADIS16240 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -# CONFIG_AD7816 is not set -# CONFIG_AD7192 is not set -# CONFIG_AD7280 is not set -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -# CONFIG_ADT7316 is not set -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -# CONFIG_AD7150 is not set -# CONFIG_AD7746 is not set -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -# CONFIG_AD9832 is not set -# CONFIG_AD9834 is not set -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -# CONFIG_AD5933 is not set -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -# CONFIG_ADE7854 is not set -# end of Active energy metering IC - -# -# Resolver to digital converters -# -# CONFIG_AD2S1210 is not set -# end of Resolver to digital converters -# end of IIO staging drivers - -# CONFIG_FB_SM750 is not set - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -# CONFIG_MFD_NVEC is not set -# CONFIG_STAGING_MEDIA is not set - -# -# Android -# -# end of Android - -# CONFIG_STAGING_BOARD is not set -# CONFIG_LTE_GDM724X is not set -# CONFIG_FIREWIRE_SERIAL is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_UNISYSSPAR is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set -# CONFIG_FB_TFT is not set -# CONFIG_WILC1000_SDIO is not set -# CONFIG_WILC1000_SPI is not set -# CONFIG_MOST is not set -# CONFIG_KS7010 is not set -# CONFIG_GREYBUS is not set -CONFIG_BCM_VIDEOCORE=y -# CONFIG_BCM2835_VCHIQ is not set -# CONFIG_SND_BCM2835 is not set -# CONFIG_VIDEO_BCM2835 is not set -# CONFIG_PI433 is not set - -# -# Gasket devices -# -# CONFIG_STAGING_GASKET_FRAMEWORK is not set -# end of Gasket devices - -# CONFIG_XIL_AXIS_FIFO is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set -# CONFIG_FIELDBUS_DEV is not set -# CONFIG_KPC2000 is not set -# CONFIG_GOLDFISH is not set -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_TBMC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_RPMSG=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_KBD_LED_BACKLIGHT=m -CONFIG_CROS_USBPD_LOGGER=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_VERSATILE=y -CONFIG_CLK_SP810=y -CONFIG_CLK_VEXPRESS_OSC=y -# CONFIG_CLK_HSDK is not set -# CONFIG_COMMON_CLK_MAX77686 is not set -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_RK808=m -CONFIG_COMMON_CLK_HI655X=m -CONFIG_COMMON_CLK_SCMI=m -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI514 is not set -# CONFIG_COMMON_CLK_SI544 is not set -# CONFIG_COMMON_CLK_SI570 is not set -# CONFIG_COMMON_CLK_CDCE706 is not set -# CONFIG_COMMON_CLK_CDCE925 is not set -# CONFIG_COMMON_CLK_CS2000_CP is not set -# CONFIG_CLK_QORIQ is not set -CONFIG_COMMON_CLK_XGENE=y -# CONFIG_COMMON_CLK_PWM is not set -# CONFIG_COMMON_CLK_VC5 is not set -# CONFIG_COMMON_CLK_BD718XX is not set -# CONFIG_COMMON_CLK_FIXED_MMIO is not set -CONFIG_COMMON_CLK_HI3516CV300=y -CONFIG_COMMON_CLK_HI3519=y -CONFIG_COMMON_CLK_HI3660=y -CONFIG_COMMON_CLK_HI3670=y -CONFIG_COMMON_CLK_HI3798CV200=y -CONFIG_COMMON_CLK_HI6220=y -CONFIG_RESET_HISI=y -CONFIG_STUB_CLK_HI6220=y -# CONFIG_STUB_CLK_HI3660 is not set -CONFIG_MXC_CLK=y -CONFIG_MXC_CLK_SCU=y -CONFIG_CLK_IMX8MM=y -CONFIG_CLK_IMX8MQ=y -CONFIG_CLK_IMX8QXP=y -CONFIG_COMMON_CLK_MESON_INPUT=y -CONFIG_COMMON_CLK_MESON_REGMAP=y -CONFIG_COMMON_CLK_MESON_DUALDIV=y -CONFIG_COMMON_CLK_MESON_MPLL=y -CONFIG_COMMON_CLK_MESON_PHASE=m -CONFIG_COMMON_CLK_MESON_PLL=y -CONFIG_COMMON_CLK_MESON_SCLK_DIV=m -CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y -CONFIG_COMMON_CLK_MESON_AO_CLKC=y -CONFIG_COMMON_CLK_MESON_EE_CLKC=y -CONFIG_COMMON_CLK_GXBB=y -CONFIG_COMMON_CLK_AXG=y -CONFIG_COMMON_CLK_AXG_AUDIO=m -CONFIG_COMMON_CLK_G12A=y -CONFIG_ARMADA_37XX_CLK=y -CONFIG_ARMADA_AP806_SYSCON=y -CONFIG_ARMADA_CP110_SYSCON=y -CONFIG_QCOM_GDSC=y -CONFIG_QCOM_RPMCC=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_QCOM_A53PLL=y -CONFIG_QCOM_CLK_APCS_MSM8916=m -CONFIG_QCOM_CLK_RPM=m -CONFIG_QCOM_CLK_SMD_RPM=m -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -# CONFIG_IPQ_GCC_4019 is not set -# CONFIG_IPQ_GCC_806X is not set -# CONFIG_IPQ_LCC_806X is not set -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_MSM_GCC_8660 is not set -CONFIG_MSM_GCC_8916=y -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_GCC_8994 is not set -CONFIG_MSM_GCC_8996=y -CONFIG_MSM_MMCC_8996=y -# CONFIG_MSM_GCC_8998 is not set -# CONFIG_QCS_GCC_404 is not set -# CONFIG_SDM_CAMCC_845 is not set -# CONFIG_SDM_GCC_660 is not set -# CONFIG_QCS_TURING_404 is not set -CONFIG_SDM_GCC_845=m -CONFIG_SDM_GPUCC_845=m -CONFIG_SDM_VIDEOCC_845=m -CONFIG_SDM_DISPCC_845=m -CONFIG_SDM_LPASSCC_845=m -# CONFIG_SPMI_PMIC_CLKDIV is not set -# CONFIG_QCOM_HFPLL is not set -# CONFIG_KPSS_XCC is not set -CONFIG_CLK_SUNXI=y -CONFIG_CLK_SUNXI_CLOCKS=y -CONFIG_CLK_SUNXI_PRCM_SUN6I=y -CONFIG_CLK_SUNXI_PRCM_SUN8I=y -CONFIG_CLK_SUNXI_PRCM_SUN9I=y -CONFIG_SUNXI_CCU=y -CONFIG_SUN50I_A64_CCU=y -CONFIG_SUN50I_H6_CCU=y -CONFIG_SUN50I_H6_R_CCU=y -# CONFIG_SUN8I_A83T_CCU is not set -CONFIG_SUN8I_H3_CCU=y -CONFIG_SUN8I_DE2_CCU=y -CONFIG_SUN8I_R_CCU=y -CONFIG_CLK_TEGRA_BPMP=y -CONFIG_TEGRA_CLK_DFLL=y -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_TIMER_OF=y -CONFIG_TIMER_ACPI=y -CONFIG_TIMER_PROBE=y -CONFIG_CLKSRC_MMIO=y -CONFIG_ROCKCHIP_TIMER=y -CONFIG_TEGRA_TIMER=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y -CONFIG_FSL_ERRATUM_A008585=y -CONFIG_HISILICON_ERRATUM_161010101=y -CONFIG_ARM64_ERRATUM_858921=y -CONFIG_SUN50I_ERRATUM_UNKNOWN1=y -CONFIG_ARM_TIMER_SP804=y -CONFIG_CLKSRC_VERSATILE=y -# end of Clock Source drivers - -CONFIG_MAILBOX=y -# CONFIG_ARM_MHU is not set -CONFIG_IMX_MBOX=m -# CONFIG_PLATFORM_MHU is not set -# CONFIG_PL320_MBOX is not set -CONFIG_ARMADA_37XX_RWTM_MBOX=m -# CONFIG_ROCKCHIP_MBOX is not set -CONFIG_PCC=y -# CONFIG_ALTERA_MBOX is not set -CONFIG_BCM2835_MBOX=y -# CONFIG_HI3660_MBOX is not set -CONFIG_HI6220_MBOX=y -# CONFIG_MAILBOX_TEST is not set -CONFIG_QCOM_APCS_IPC=m -CONFIG_TEGRA_HSP_MBOX=y -CONFIG_XGENE_SLIMPRO_MBOX=m -CONFIG_IOMMU_IOVA=y -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -CONFIG_IOMMU_IO_PGTABLE=y -CONFIG_IOMMU_IO_PGTABLE_LPAE=y -# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_OF_IOMMU=y -CONFIG_IOMMU_DMA=y -# CONFIG_ROCKCHIP_IOMMU is not set -CONFIG_TEGRA_IOMMU_SMMU=y -CONFIG_ARM_SMMU=y -CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y -CONFIG_ARM_SMMU_V3=y -CONFIG_QCOM_IOMMU=y - -# -# Remoteproc drivers -# -# CONFIG_REMOTEPROC is not set -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -CONFIG_RPMSG=m -# CONFIG_RPMSG_CHAR is not set -CONFIG_RPMSG_QCOM_GLINK_NATIVE=m -CONFIG_RPMSG_QCOM_GLINK_RPM=m -# CONFIG_RPMSG_VIRTIO is not set -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -CONFIG_MESON_CANVAS=m -CONFIG_MESON_CLK_MEASURE=y -CONFIG_MESON_GX_SOCINFO=y -CONFIG_MESON_GX_PM_DOMAINS=y -CONFIG_MESON_MX_SOCINFO=y -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -CONFIG_BCM2835_POWER=y -CONFIG_RASPBERRYPI_POWER=y -# CONFIG_SOC_BRCMSTB is not set -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -CONFIG_FSL_GUTS=y -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -CONFIG_IMX_GPCV2_PM_DOMAINS=y -# end of i.MX SoC drivers - -# -# IXP4xx SoC drivers -# -# CONFIG_IXP4XX_QMGR is not set -# CONFIG_IXP4XX_NPE is not set -# end of IXP4xx SoC drivers - -# -# Qualcomm SoC drivers -# -# CONFIG_QCOM_COMMAND_DB is not set -CONFIG_QCOM_GENI_SE=m -CONFIG_QCOM_GSBI=m -CONFIG_QCOM_LLCC=m -CONFIG_QCOM_SDM845_LLCC=m -CONFIG_QCOM_MDT_LOADER=m -# CONFIG_QCOM_RMTFS_MEM is not set -# CONFIG_QCOM_RPMH is not set -CONFIG_QCOM_SMD_RPM=m -CONFIG_QCOM_WCNSS_CTRL=m -CONFIG_QCOM_APR=m -# end of Qualcomm SoC drivers - -CONFIG_ROCKCHIP_GRF=y -CONFIG_ROCKCHIP_PM_DOMAINS=y -CONFIG_SUNXI_SRAM=y -CONFIG_ARCH_TEGRA_132_SOC=y -CONFIG_ARCH_TEGRA_210_SOC=y -# CONFIG_ARCH_TEGRA_186_SOC is not set -CONFIG_ARCH_TEGRA_194_SOC=y -CONFIG_SOC_TEGRA_FUSE=y -CONFIG_SOC_TEGRA_FLOWCTRL=y -CONFIG_SOC_TEGRA_PMC=y -CONFIG_SOC_TEGRA_POWERGATE_BPMP=y -# CONFIG_SOC_TI is not set - -# -# Xilinx SoC drivers -# -# CONFIG_XILINX_VCU is not set -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m -# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set -# CONFIG_DEVFREQ_GOV_POWERSAVE is not set -# CONFIG_DEVFREQ_GOV_USERSPACE is not set -# CONFIG_DEVFREQ_GOV_PASSIVE is not set - -# -# DEVFREQ Drivers -# -# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set -# CONFIG_PM_DEVFREQ_EVENT is not set -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -# CONFIG_EXTCON_ADC_JACK is not set -# CONFIG_EXTCON_GPIO is not set -# CONFIG_EXTCON_MAX3355 is not set -CONFIG_EXTCON_PTN5150=m -CONFIG_EXTCON_QCOM_SPMI_MISC=m -# CONFIG_EXTCON_RT8973A is not set -# CONFIG_EXTCON_SM5502 is not set -CONFIG_EXTCON_USB_GPIO=m -# CONFIG_EXTCON_USBC_CROS_EC is not set -CONFIG_MEMORY=y -# CONFIG_ARM_PL172_MPMC is not set -CONFIG_TEGRA_MC=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -# CONFIG_IIO_BUFFER_CB is not set -# CONFIG_IIO_BUFFER_HW_CONSUMER is not set -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -# CONFIG_IIO_CONFIGFS is not set -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -# CONFIG_IIO_SW_DEVICE is not set -# CONFIG_IIO_SW_TRIGGER is not set - -# -# Accelerometers -# -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADXL345_I2C is not set -# CONFIG_ADXL345_SPI is not set -# CONFIG_ADXL372_SPI is not set -# CONFIG_ADXL372_I2C is not set -# CONFIG_BMA180 is not set -# CONFIG_BMA220 is not set -# CONFIG_BMC150_ACCEL is not set -# CONFIG_DA280 is not set -# CONFIG_DA311 is not set -# CONFIG_DMARD06 is not set -# CONFIG_DMARD09 is not set -# CONFIG_DMARD10 is not set -CONFIG_HID_SENSOR_ACCEL_3D=m -# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set -# CONFIG_IIO_ST_ACCEL_3AXIS is not set -# CONFIG_KXSD9 is not set -# CONFIG_KXCJK1013 is not set -# CONFIG_MC3230 is not set -# CONFIG_MMA7455_I2C is not set -# CONFIG_MMA7455_SPI is not set -# CONFIG_MMA7660 is not set -# CONFIG_MMA8452 is not set -# CONFIG_MMA9551 is not set -# CONFIG_MMA9553 is not set -# CONFIG_MXC4005 is not set -# CONFIG_MXC6255 is not set -# CONFIG_SCA3000 is not set -# CONFIG_STK8312 is not set -# CONFIG_STK8BA50 is not set -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD_SIGMA_DELTA=m -CONFIG_AD7124=m -# CONFIG_AD7266 is not set -# CONFIG_AD7291 is not set -# CONFIG_AD7298 is not set -# CONFIG_AD7476 is not set -# CONFIG_AD7606_IFACE_PARALLEL is not set -# CONFIG_AD7606_IFACE_SPI is not set -# CONFIG_AD7766 is not set -# CONFIG_AD7768_1 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7791 is not set -# CONFIG_AD7793 is not set -# CONFIG_AD7887 is not set -# CONFIG_AD7923 is not set -# CONFIG_AD7949 is not set -# CONFIG_AD799X is not set -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -# CONFIG_CC10001_ADC is not set -# CONFIG_ENVELOPE_DETECTOR is not set -# CONFIG_HI8435 is not set -# CONFIG_HX711 is not set -# CONFIG_INA2XX_ADC is not set -CONFIG_IMX7D_ADC=m -# CONFIG_LTC2471 is not set -# CONFIG_LTC2485 is not set -# CONFIG_LTC2497 is not set -# CONFIG_MAX1027 is not set -# CONFIG_MAX11100 is not set -# CONFIG_MAX1118 is not set -# CONFIG_MAX1363 is not set -# CONFIG_MAX9611 is not set -# CONFIG_MCP320X is not set -# CONFIG_MCP3422 is not set -# CONFIG_MCP3911 is not set -CONFIG_MESON_SARADC=m -# CONFIG_NAU7802 is not set -CONFIG_QCOM_VADC_COMMON=m -CONFIG_QCOM_SPMI_IADC=m -CONFIG_QCOM_SPMI_VADC=m -# CONFIG_QCOM_SPMI_ADC5 is not set -# CONFIG_ROCKCHIP_SARADC is not set -# CONFIG_SD_ADC_MODULATOR is not set -# CONFIG_TI_ADC081C is not set -# CONFIG_TI_ADC0832 is not set -# CONFIG_TI_ADC084S021 is not set -# CONFIG_TI_ADC12138 is not set -# CONFIG_TI_ADC108S102 is not set -# CONFIG_TI_ADC128S052 is not set -# CONFIG_TI_ADC161S626 is not set -# CONFIG_TI_ADS1015 is not set -# CONFIG_TI_ADS7950 is not set -# CONFIG_TI_ADS8344 is not set -# CONFIG_TI_ADS8688 is not set -# CONFIG_TI_ADS124S08 is not set -# CONFIG_TI_TLC4541 is not set -# CONFIG_VF610_ADC is not set -CONFIG_VIPERBOARD_ADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# CONFIG_IIO_RESCALE is not set -# end of Analog Front Ends - -# -# Amplifiers -# -# CONFIG_AD8366 is not set -# end of Amplifiers - -# -# Chemical Sensors -# -# CONFIG_ATLAS_PH_SENSOR is not set -# CONFIG_BME680 is not set -# CONFIG_CCS811 is not set -# CONFIG_IAQCORE is not set -# CONFIG_PMS7003 is not set -# CONFIG_SENSIRION_SGP30 is not set -# CONFIG_SPS30 is not set -# CONFIG_VZ89X is not set -# end of Chemical Sensors - -# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -# -# SSP Sensor Common -# -# CONFIG_IIO_SSP_SENSORHUB is not set -# end of SSP Sensor Common - -# -# Digital to analog converters -# -# CONFIG_AD5064 is not set -# CONFIG_AD5360 is not set -# CONFIG_AD5380 is not set -# CONFIG_AD5421 is not set -CONFIG_AD5446=m -# CONFIG_AD5449 is not set -# CONFIG_AD5592R is not set -# CONFIG_AD5593R is not set -# CONFIG_AD5504 is not set -# CONFIG_AD5624R_SPI is not set -# CONFIG_LTC1660 is not set -# CONFIG_LTC2632 is not set -# CONFIG_AD5686_SPI is not set -# CONFIG_AD5696_I2C is not set -# CONFIG_AD5755 is not set -# CONFIG_AD5758 is not set -# CONFIG_AD5761 is not set -# CONFIG_AD5764 is not set -# CONFIG_AD5791 is not set -# CONFIG_AD7303 is not set -# CONFIG_AD8801 is not set -# CONFIG_DPOT_DAC is not set -# CONFIG_DS4424 is not set -# CONFIG_M62332 is not set -# CONFIG_MAX517 is not set -# CONFIG_MAX5821 is not set -# CONFIG_MCP4725 is not set -# CONFIG_MCP4922 is not set -# CONFIG_TI_DAC082S085 is not set -# CONFIG_TI_DAC5571 is not set -# CONFIG_TI_DAC7311 is not set -# CONFIG_TI_DAC7612 is not set -# CONFIG_VF610_DAC is not set -# end of Digital to analog converters - -# -# IIO dummy driver -# -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -# CONFIG_AD9523 is not set -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -# CONFIG_ADF4350 is not set -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -# CONFIG_ADIS16080 is not set -# CONFIG_ADIS16130 is not set -# CONFIG_ADIS16136 is not set -# CONFIG_ADIS16260 is not set -# CONFIG_ADXRS450 is not set -# CONFIG_BMG160 is not set -# CONFIG_FXAS21002C is not set -CONFIG_HID_SENSOR_GYRO_3D=m -# CONFIG_MPU3050_I2C is not set -# CONFIG_IIO_ST_GYRO_3AXIS is not set -# CONFIG_ITG3200 is not set -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -# CONFIG_AFE4403 is not set -# CONFIG_AFE4404 is not set -# CONFIG_MAX30100 is not set -# CONFIG_MAX30102 is not set -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -# CONFIG_AM2315 is not set -CONFIG_DHT11=m -# CONFIG_HDC100X is not set -# CONFIG_HID_SENSOR_HUMIDITY is not set -# CONFIG_HTS221 is not set -# CONFIG_HTU21 is not set -# CONFIG_SI7005 is not set -# CONFIG_SI7020 is not set -# end of Humidity sensors - -# -# Inertial measurement units -# -# CONFIG_ADIS16400 is not set -# CONFIG_ADIS16480 is not set -# CONFIG_BMI160_I2C is not set -# CONFIG_BMI160_SPI is not set -# CONFIG_KMX61 is not set -# CONFIG_INV_MPU6050_I2C is not set -# CONFIG_INV_MPU6050_SPI is not set -# CONFIG_IIO_ST_LSM6DSX is not set -# end of Inertial measurement units - -# -# Light sensors -# -CONFIG_ACPI_ALS=m -# CONFIG_ADJD_S311 is not set -# CONFIG_AL3320A is not set -# CONFIG_APDS9300 is not set -# CONFIG_APDS9960 is not set -# CONFIG_BH1750 is not set -CONFIG_BH1780=m -# CONFIG_CM32181 is not set -# CONFIG_CM3232 is not set -# CONFIG_CM3323 is not set -# CONFIG_CM3605 is not set -# CONFIG_CM36651 is not set -# CONFIG_GP2AP020A00F is not set -# CONFIG_SENSORS_ISL29018 is not set -# CONFIG_SENSORS_ISL29028 is not set -# CONFIG_ISL29125 is not set -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -# CONFIG_JSA1212 is not set -# CONFIG_RPR0521 is not set -# CONFIG_LTR501 is not set -# CONFIG_LV0104CS is not set -# CONFIG_MAX44000 is not set -# CONFIG_MAX44009 is not set -# CONFIG_OPT3001 is not set -# CONFIG_PA12203001 is not set -# CONFIG_SI1133 is not set -# CONFIG_SI1145 is not set -# CONFIG_STK3310 is not set -# CONFIG_ST_UVIS25 is not set -# CONFIG_TCS3414 is not set -# CONFIG_TCS3472 is not set -# CONFIG_SENSORS_TSL2563 is not set -# CONFIG_TSL2583 is not set -# CONFIG_TSL2772 is not set -# CONFIG_TSL4531 is not set -# CONFIG_US5182D is not set -# CONFIG_VCNL4000 is not set -# CONFIG_VCNL4035 is not set -# CONFIG_VEML6070 is not set -# CONFIG_VL6180 is not set -# CONFIG_ZOPT2201 is not set -# end of Light sensors - -# -# Magnetometer sensors -# -# CONFIG_AK8974 is not set -# CONFIG_AK8975 is not set -# CONFIG_AK09911 is not set -# CONFIG_BMC150_MAGN_I2C is not set -# CONFIG_BMC150_MAGN_SPI is not set -# CONFIG_MAG3110 is not set -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -# CONFIG_MMC35240 is not set -# CONFIG_IIO_ST_MAGN_3AXIS is not set -# CONFIG_SENSORS_HMC5843_I2C is not set -# CONFIG_SENSORS_HMC5843_SPI is not set -# CONFIG_SENSORS_RM3100_I2C is not set -# CONFIG_SENSORS_RM3100_SPI is not set -# end of Magnetometer sensors - -# -# Multiplexers -# -# CONFIG_IIO_MUX is not set -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -# CONFIG_IIO_INTERRUPT_TRIGGER is not set -# CONFIG_IIO_SYSFS_TRIGGER is not set -# end of Triggers - standalone - -# -# Digital potentiometers -# -# CONFIG_AD5272 is not set -# CONFIG_DS1803 is not set -# CONFIG_MAX5481 is not set -# CONFIG_MAX5487 is not set -# CONFIG_MCP4018 is not set -# CONFIG_MCP4131 is not set -# CONFIG_MCP4531 is not set -# CONFIG_MCP41010 is not set -# CONFIG_TPL0102 is not set -# end of Digital potentiometers - -# -# Digital potentiostats -# -# CONFIG_LMP91000 is not set -# end of Digital potentiostats - -# -# Pressure sensors -# -# CONFIG_ABP060MG is not set -# CONFIG_BMP280 is not set -CONFIG_HID_SENSOR_PRESS=m -# CONFIG_HP03 is not set -# CONFIG_MPL115_I2C is not set -# CONFIG_MPL115_SPI is not set -# CONFIG_MPL3115 is not set -# CONFIG_MS5611 is not set -# CONFIG_MS5637 is not set -# CONFIG_IIO_ST_PRESS is not set -# CONFIG_T5403 is not set -# CONFIG_HP206C is not set -# CONFIG_ZPA2326 is not set -# end of Pressure sensors - -# -# Lightning sensors -# -# CONFIG_AS3935 is not set -# end of Lightning sensors - -# -# Proximity and distance sensors -# -# CONFIG_ISL29501 is not set -# CONFIG_LIDAR_LITE_V2 is not set -# CONFIG_MB1232 is not set -# CONFIG_RFD77402 is not set -# CONFIG_SRF04 is not set -# CONFIG_SX9500 is not set -# CONFIG_SRF08 is not set -# CONFIG_VL53L0X_I2C is not set -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -# CONFIG_AD2S90 is not set -# CONFIG_AD2S1200 is not set -# end of Resolver to digital converters - -# -# Temperature sensors -# -# CONFIG_MAXIM_THERMOCOUPLE is not set -# CONFIG_HID_SENSOR_TEMP is not set -# CONFIG_MLX90614 is not set -# CONFIG_MLX90632 is not set -# CONFIG_TMP006 is not set -# CONFIG_TMP007 is not set -# CONFIG_TSYS01 is not set -# CONFIG_TSYS02D is not set -# CONFIG_MAX31856 is not set -# end of Temperature sensors - -# CONFIG_NTB is not set -# CONFIG_VME_BUS is not set -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_PWM_BCM2835=m -# CONFIG_PWM_CROS_EC is not set -# CONFIG_PWM_FSL_FTM is not set -# CONFIG_PWM_HIBVT is not set -# CONFIG_PWM_IMX1 is not set -# CONFIG_PWM_IMX27 is not set -# CONFIG_PWM_IMX_TPM is not set -CONFIG_PWM_MESON=m -# CONFIG_PWM_PCA9685 is not set -CONFIG_PWM_ROCKCHIP=m -CONFIG_PWM_SUN4I=m -CONFIG_PWM_TEGRA=m - -# -# IRQ chip support -# -CONFIG_IRQCHIP=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_PM=y -CONFIG_ARM_GIC_MAX_NR=1 -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -CONFIG_HISILICON_IRQ_MBIGEN=y -CONFIG_MADERA_IRQ=m -CONFIG_IMX_GPCV2=y -CONFIG_MVEBU_GICP=y -CONFIG_MVEBU_ICU=y -CONFIG_MVEBU_ODMI=y -CONFIG_MVEBU_PIC=y -CONFIG_MVEBU_SEI=y -CONFIG_PARTITION_PERCPU=y -CONFIG_QCOM_IRQ_COMBINER=y -CONFIG_MESON_IRQ_GPIO=y -# CONFIG_QCOM_PDC is not set -CONFIG_IMX_IRQSTEER=y -# end of IRQ chip support - -# CONFIG_IPACK_BUS is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_IMX7=y -CONFIG_RESET_MESON=y -# CONFIG_RESET_MESON_AUDIO_ARB is not set -# CONFIG_RESET_QCOM_AOSS is not set -# CONFIG_RESET_QCOM_PDC is not set -CONFIG_RESET_SIMPLE=y -CONFIG_RESET_SUNXI=y -# CONFIG_RESET_TI_SYSCON is not set -CONFIG_COMMON_RESET_HI3660=y -CONFIG_COMMON_RESET_HI6220=y -CONFIG_RESET_TEGRA_BPMP=y -# CONFIG_FMC is not set - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PHY_MIPI_DPHY=y -CONFIG_PHY_XGENE=m -CONFIG_PHY_SUN4I_USB=m -# CONFIG_PHY_SUN6I_MIPI_DPHY is not set -# CONFIG_PHY_SUN9I_USB is not set -CONFIG_PHY_MESON8B_USB2=m -CONFIG_PHY_MESON_GXL_USB2=y -CONFIG_PHY_MESON_GXL_USB3=y -CONFIG_PHY_MESON_G12A_USB2=y -CONFIG_PHY_MESON_G12A_USB3_PCIE=y -# CONFIG_BCM_KONA_USB2_PHY is not set -# CONFIG_PHY_CADENCE_DP is not set -# CONFIG_PHY_CADENCE_DPHY is not set -# CONFIG_PHY_CADENCE_SIERRA is not set -CONFIG_PHY_FSL_IMX8MQ_USB=m -CONFIG_PHY_HI6220_USB=m -CONFIG_PHY_HI3660_USB=m -# CONFIG_PHY_HISTB_COMBPHY is not set -# CONFIG_PHY_HISI_INNO_USB2 is not set -CONFIG_PHY_MVEBU_A3700_COMPHY=m -CONFIG_PHY_MVEBU_A3700_UTMI=m -CONFIG_PHY_MVEBU_A38X_COMPHY=m -CONFIG_PHY_MVEBU_CP110_COMPHY=m -# CONFIG_PHY_PXA_28NM_HSIC is not set -# CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_PHY_CPCAP_USB is not set -# CONFIG_PHY_MAPPHONE_MDM6600 is not set -# CONFIG_PHY_OCELOT_SERDES is not set -CONFIG_PHY_QCOM_APQ8064_SATA=m -CONFIG_PHY_QCOM_IPQ806X_SATA=m -CONFIG_PHY_QCOM_QMP=m -CONFIG_PHY_QCOM_QUSB2=m -CONFIG_PHY_QCOM_UFS=m -CONFIG_PHY_QCOM_UFS_14NM=m -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -# CONFIG_PHY_ROCKCHIP_DP is not set -CONFIG_PHY_ROCKCHIP_EMMC=m -# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set -CONFIG_PHY_ROCKCHIP_INNO_USB2=m -CONFIG_PHY_ROCKCHIP_PCIE=m -# CONFIG_PHY_ROCKCHIP_TYPEC is not set -# CONFIG_PHY_ROCKCHIP_USB is not set -# CONFIG_PHY_SAMSUNG_USB2 is not set -CONFIG_PHY_TEGRA_XUSB=m -CONFIG_PHY_TUSB1210=m -# end of PHY Subsystem - -# CONFIG_POWERCAP is not set -# CONFIG_MCB is not set - -# -# Performance monitor support -# -# CONFIG_ARM_CCI_PMU is not set -# CONFIG_ARM_CCN is not set -CONFIG_ARM_PMU=y -CONFIG_ARM_PMU_ACPI=y -CONFIG_ARM_SMMU_V3_PMU=m -# CONFIG_ARM_DSU_PMU is not set -# CONFIG_HISI_PMU is not set -# CONFIG_QCOM_L2_PMU is not set -# CONFIG_QCOM_L3_PMU is not set -CONFIG_THUNDERX2_PMU=m -# CONFIG_XGENE_PMU is not set -# CONFIG_ARM_SPE_PMU is not set -# end of Performance monitor support - -CONFIG_RAS=y - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_LIBNVDIMM=y -CONFIG_BLK_DEV_PMEM=y -CONFIG_ND_BLK=y -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=y -CONFIG_BTT=y -CONFIG_OF_PMEM=y -CONFIG_DAX_DRIVER=y -CONFIG_DAX=y -CONFIG_DEV_DAX=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_NVMEM_IMX_IIM=m -CONFIG_NVMEM_IMX_OCOTP=m -CONFIG_QCOM_QFPROM=m -# CONFIG_ROCKCHIP_EFUSE is not set -CONFIG_NVMEM_SUNXI_SID=m -# CONFIG_MESON_EFUSE is not set -# CONFIG_MESON_MX_EFUSE is not set - -# -# HW tracing support -# -# CONFIG_STM is not set -# CONFIG_INTEL_TH is not set -# end of HW tracing support - -# CONFIG_FPGA is not set -# CONFIG_FSI is not set -CONFIG_TEE=m - -# -# TEE drivers -# -CONFIG_OPTEE=m -CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 -# end of TEE drivers - -CONFIG_PM_OPP=y -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -# CONFIG_COUNTER is not set -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -CONFIG_FS_DAX=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -CONFIG_EXPORTFS_BLOCK_OPS=y -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -CONFIG_PRINT_QUOTA_WARNING=y -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="ascii" -CONFIG_FAT_DEFAULT_UTF8=y -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_VMCORE=y -# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_MEMFD_CREATE=y -CONFIG_ARCH_HAS_GIGANTIC_PAGE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=m -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ORANGEFS_FS is not set -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=m -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -CONFIG_JFFS2_CMODE_PRIORITY=y -# CONFIG_JFFS2_CMODE_SIZE is not set -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set -CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_UBIFS_ATIME_SUPPORT is not set -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -# CONFIG_CRAMFS is not set -CONFIG_SQUASHFS=m -CONFIG_SQUASHFS_FILE_CACHE=y -# CONFIG_SQUASHFS_FILE_DIRECT is not set -CONFIG_SQUASHFS_DECOMP_SINGLE=y -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -CONFIG_SQUASHFS_ZSTD=y -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -# CONFIG_ROMFS_BACKED_BY_BLOCK is not set -# CONFIG_ROMFS_BACKED_BY_MTD is not set -CONFIG_ROMFS_BACKED_BY_BOTH=y -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_ROMFS_ON_MTD=y -CONFIG_PSTORE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=m -# CONFIG_PSTORE_LZO_COMPRESS is not set -# CONFIG_PSTORE_LZ4_COMPRESS is not set -# CONFIG_PSTORE_LZ4HC_COMPRESS is not set -# CONFIG_PSTORE_842_COMPRESS is not set -# CONFIG_PSTORE_ZSTD_COMPRESS is not set -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -# CONFIG_PSTORE_CONSOLE is not set -# CONFIG_PSTORE_PMSG is not set -# CONFIG_PSTORE_FTRACE is not set -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -# CONFIG_NFS_V4_1_MIGRATION is not set -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_PNFS=y -CONFIG_NFSD_BLOCKLAYOUT=y -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_ACL=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_DLM_DEBUG=y -# CONFIG_UNICODE is not set -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_COMPAT=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_KEY_DH_OPERATIONS is not set -CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_LSM_MMAP_MIN_ADDR=32768 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -# CONFIG_FORTIFY_SOURCE is not set -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set -# CONFIG_SECURITY_SELINUX_DISABLE is not set -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0 -# CONFIG_SECURITY_SMACK is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -# CONFIG_IMA is not set -# CONFIG_EVM is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# -CONFIG_GCC_PLUGIN_STRUCTLEAK=y - -# -# Memory initialization -# -# CONFIG_INIT_STACK_NONE is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set -CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y -# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set -CONFIG_GCC_PLUGIN_STACKLEAK=y -CONFIG_STACKLEAK_TRACK_MIN_SIZE=100 -# CONFIG_STACKLEAK_METRICS is not set -CONFIG_STACKLEAK_RUNTIME_DISABLE=y -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=m -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=m -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS1280=m -CONFIG_CRYPTO_SEQIV=m -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -# CONFIG_CRYPTO_KEYWRAP is not set -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_ADIANTUM=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=m -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_SHA3=m -# CONFIG_CRYPTO_SM3 is not set -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_TI is not set -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_842 is not set -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=m -CONFIG_CRYPTO_DRBG_HMAC=y -# CONFIG_CRYPTO_DRBG_HASH is not set -# CONFIG_CRYPTO_DRBG_CTR is not set -CONFIG_CRYPTO_DRBG=m -CONFIG_CRYPTO_JITTERENTROPY=m -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=m -CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=m -CONFIG_CRYPTO_DEV_FSL_CAAM=m -# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set -CONFIG_CRYPTO_DEV_FSL_CAAM_JR=m -CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9 -# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=m -CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=m -CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=m -CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=m -CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=m -CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=m -CONFIG_CRYPTO_DEV_SAHARA=m -# CONFIG_CRYPTO_DEV_CCP is not set -# CONFIG_CRYPTO_DEV_MXS_DCP is not set -CONFIG_CRYPTO_DEV_CPT=m -CONFIG_CAVIUM_CPT=m -CONFIG_CRYPTO_DEV_NITROX=m -CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m -# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set -CONFIG_CRYPTO_DEV_QCE=m -CONFIG_CRYPTO_DEV_QCOM_RNG=m -# CONFIG_CRYPTO_DEV_ROCKCHIP is not set -CONFIG_CRYPTO_DEV_CHELSIO=m -# CONFIG_CHELSIO_IPSEC_INLINE is not set -CONFIG_CRYPTO_DEV_VIRTIO=m -CONFIG_CRYPTO_DEV_SAFEXCEL=m -# CONFIG_CRYPTO_DEV_CCREE is not set -CONFIG_CRYPTO_DEV_HISI_SEC=m -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_STMP_DEVICE=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -# CONFIG_INDIRECT_PIO is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -CONFIG_AUDIT_GENERIC=y -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_AUDIT_COMPAT_GENERIC=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -# CONFIG_XZ_DEC_X86 is not set -# CONFIG_XZ_DEC_POWERPC is not set -# CONFIG_XZ_DEC_IA64 is not set -# CONFIG_XZ_DEC_ARM is not set -# CONFIG_XZ_DEC_ARMTHUMB is not set -# CONFIG_XZ_DEC_SPARC is not set -# CONFIG_XZ_DEC_TEST is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_XARRAY_MULTI=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y -CONFIG_ARCH_HAS_SETUP_DMA_OPS=y -CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y -CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y -CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y -CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y -CONFIG_ARCH_HAS_DMA_MMAP_PGPROT=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=64 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -# CONFIG_DDR is not set -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_LIBFDT=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_FONT_SUPPORT=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_SG_SPLIT=y -CONFIG_SG_POOL=y -CONFIG_ARCH_HAS_PMEM_API=y -CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y -CONFIG_SBITMAP=y -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_INFO_REDUCED is not set -# CONFIG_DEBUG_INFO_SPLIT is not set -# CONFIG_DEBUG_INFO_DWARF4 is not set -# CONFIG_DEBUG_INFO_BTF is not set -# CONFIG_GDB_SCRIPTS is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=2048 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_OPTIMIZE_INLINING=y -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -CONFIG_PAGE_EXTENSION=y -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_OWNER is not set -CONFIG_PAGE_POISONING=y -CONFIG_PAGE_POISONING_NO_SANITY=y -# CONFIG_PAGE_POISONING_ZERO is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_PER_CPU_MAPS is not set -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y -CONFIG_CC_HAS_KASAN_GENERIC=y -# CONFIG_KASAN is not set -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# end of Debug Lockups and Hangs - -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -# CONFIG_WW_MUTEX_SELFTEST is not set -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_HAVE_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LIST=y -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -CONFIG_STACK_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -CONFIG_UPROBE_EVENTS=y -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -CONFIG_DYNAMIC_FTRACE=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_TEST_HEXDUMP is not set -# CONFIG_TEST_STRING_HELPERS is not set -CONFIG_TEST_STRSCPY=m -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_BITMAP is not set -# CONFIG_TEST_BITFIELD is not set -# CONFIG_TEST_UUID is not set -CONFIG_TEST_XARRAY=m -# CONFIG_TEST_OVERFLOW is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_HASH is not set -# CONFIG_TEST_IDA is not set -# CONFIG_TEST_LKM is not set -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -# CONFIG_FIND_BIT_BENCHMARK is not set -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -# CONFIG_TEST_UDELAY is not set -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -# CONFIG_TEST_STACKINIT is not set -# CONFIG_MEMTEST is not set -CONFIG_BUG_ON_DATA_CORRUPTION=y -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_UBSAN is not set -CONFIG_UBSAN_ALIGNMENT=y -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y -# CONFIG_ARM64_PTDUMP_DEBUGFS is not set -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set -# CONFIG_DEBUG_WX is not set -# CONFIG_DEBUG_ALIGN_RODATA is not set -# CONFIG_DEBUG_EFI is not set -# CONFIG_ARM64_RELOC_TEST is not set -# CONFIG_CORESIGHT is not set -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.2-i686.conf b/gnu/packages/aux-files/linux-libre/5.2-i686.conf deleted file mode 100644 index 8813a70d3d..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.2-i686.conf +++ /dev/null @@ -1,10180 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/x86 5.2.0-gnu Kernel Configuration -# - -# -# Compiler: gcc (GCC) 7.4.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=70400 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y -CONFIG_THREAD_INFO_IN_TASK=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_XZ is not set -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_USELIB=y -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y -CONFIG_GENERIC_IRQ_RESERVATION_MODE=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_CLOCKSOURCE_INIT=y -CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y -CONFIG_GENERIC_CMOS_UPDATE=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y -CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -CONFIG_SGETMASK_SYSCALL=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_SYSCALL=y -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -# CONFIG_64BIT is not set -CONFIG_X86_32=y -CONFIG_FORCE_DYNAMIC_FTRACE=y -CONFIG_X86=y -CONFIG_INSTRUCTION_DECODER=y -CONFIG_OUTPUT_FORMAT="elf32-i386" -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_BITS_MAX=16 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_BUG=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_FILTER_PGPROT=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_HAVE_INTEL_TXT=y -CONFIG_X86_32_SMP=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_CC_HAS_SANE_STACKPROTECTOR=y - -# -# Processor type and features -# -CONFIG_ZONE_DMA=y -CONFIG_SMP=y -CONFIG_X86_FEATURE_NAMES=y -CONFIG_X86_MPPARSE=y -# CONFIG_GOLDFISH is not set -CONFIG_RETPOLINE=y -# CONFIG_X86_CPU_RESCTRL is not set -# CONFIG_X86_BIGSMP is not set -CONFIG_X86_EXTENDED_PLATFORM=y -# CONFIG_X86_GOLDFISH is not set -CONFIG_X86_INTEL_MID=y -# CONFIG_X86_INTEL_QUARK is not set -CONFIG_X86_INTEL_LPSS=y -CONFIG_X86_AMD_PLATFORM_DEVICE=y -CONFIG_IOSF_MBI=y -CONFIG_IOSF_MBI_DEBUG=y -# CONFIG_X86_RDC321X is not set -# CONFIG_X86_32_NON_STANDARD is not set -CONFIG_X86_32_IRIS=m -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_PARAVIRT_XXL=y -# CONFIG_PARAVIRT_DEBUG is not set -CONFIG_PARAVIRT_SPINLOCKS=y -CONFIG_XEN=y -CONFIG_XEN_PV=y -CONFIG_XEN_PV_SMP=y -CONFIG_XEN_DOM0=y -CONFIG_XEN_PVHVM=y -CONFIG_XEN_PVHVM_SMP=y -CONFIG_XEN_SAVE_RESTORE=y -# CONFIG_XEN_DEBUG_FS is not set -CONFIG_XEN_PVH=y -CONFIG_KVM_GUEST=y -CONFIG_PVH=y -CONFIG_KVM_DEBUG_FS=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_PARAVIRT_CLOCK=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -CONFIG_M686=y -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MELAN is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MCORE2 is not set -# CONFIG_MATOM is not set -CONFIG_X86_GENERIC=y -CONFIG_X86_INTERNODE_CACHE_SHIFT=6 -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_TSC=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=6 -CONFIG_X86_DEBUGCTLMSR=y -CONFIG_PROCESSOR_SELECT=y -CONFIG_CPU_SUP_INTEL=y -CONFIG_CPU_SUP_CYRIX_32=y -CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_HYGON=y -CONFIG_CPU_SUP_CENTAUR=y -CONFIG_CPU_SUP_TRANSMETA_32=y -CONFIG_CPU_SUP_UMC_32=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_APB_TIMER=y -CONFIG_DMI=y -CONFIG_NR_CPUS_RANGE_BEGIN=2 -CONFIG_NR_CPUS_RANGE_END=8 -CONFIG_NR_CPUS_DEFAULT=8 -CONFIG_NR_CPUS=8 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_SCHED_MC_PRIO=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y -CONFIG_X86_MCE=y -# CONFIG_X86_MCELOG_LEGACY is not set -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_X86_ANCIENT_MCE is not set -CONFIG_X86_MCE_THRESHOLD=y -# CONFIG_X86_MCE_INJECT is not set -CONFIG_X86_THERMAL_VECTOR=y - -# -# Performance monitoring -# -CONFIG_PERF_EVENTS_INTEL_UNCORE=y -CONFIG_PERF_EVENTS_INTEL_RAPL=y -CONFIG_PERF_EVENTS_INTEL_CSTATE=y -CONFIG_PERF_EVENTS_AMD_POWER=m -# end of Performance monitoring - -# CONFIG_X86_LEGACY_VM86 is not set -CONFIG_X86_16BIT=y -CONFIG_X86_ESPFIX32=y -# CONFIG_TOSHIBA is not set -CONFIG_I8K=m -CONFIG_X86_REBOOTFIXUPS=y -CONFIG_MICROCODE=y -CONFIG_MICROCODE_INTEL=y -CONFIG_MICROCODE_AMD=y -CONFIG_MICROCODE_OLD_INTERFACE=y -CONFIG_X86_MSR=m -CONFIG_X86_CPUID=m -# CONFIG_NOHIGHMEM is not set -# CONFIG_HIGHMEM4G is not set -CONFIG_HIGHMEM64G=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_HIGHMEM=y -CONFIG_X86_PAE=y -# CONFIG_X86_CPA_STATISTICS is not set -CONFIG_ARCH_HAS_MEM_ENCRYPT=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ILLEGAL_POINTER_VALUE=0 -CONFIG_X86_PMEM_LEGACY_DEVICE=y -CONFIG_X86_PMEM_LEGACY=y -CONFIG_HIGHPTE=y -CONFIG_X86_CHECK_BIOS_CORRUPTION=y -CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y -CONFIG_X86_RESERVE_LOW=64 -# CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y -CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 -CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -CONFIG_X86_PAT=y -CONFIG_ARCH_USES_PG_UNCACHED=y -CONFIG_ARCH_RANDOM=y -CONFIG_X86_SMAP=y -CONFIG_X86_INTEL_UMIP=y -CONFIG_EFI=y -CONFIG_EFI_STUB=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_KEXEC=y -CONFIG_CRASH_DUMP=y -CONFIG_KEXEC_JUMP=y -CONFIG_PHYSICAL_START=0x1000000 -CONFIG_RELOCATABLE=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_X86_NEED_RELOCS=y -CONFIG_PHYSICAL_ALIGN=0x1000000 -CONFIG_HOTPLUG_CPU=y -# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set -# CONFIG_DEBUG_HOTPLUG_CPU0 is not set -# CONFIG_COMPAT_VDSO is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_MODIFY_LDT_SYSCALL=y -# end of Processor type and features - -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y - -# -# Power management and ACPI options -# -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -CONFIG_PM_WAKELOCKS=y -CONFIG_PM_WAKELOCKS_LIMIT=100 -CONFIG_PM_WAKELOCKS_GC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_DPM_WATCHDOG is not set -CONFIG_PM_TRACE=y -CONFIG_PM_TRACE_RTC=y -CONFIG_PM_CLK=y -CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y -# CONFIG_ENERGY_MODEL is not set -CONFIG_ARCH_SUPPORTS_ACPI=y -CONFIG_ACPI=y -CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y -CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y -CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SPCR_TABLE=y -CONFIG_ACPI_SLEEP=y -# CONFIG_ACPI_PROCFS_POWER is not set -CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y -CONFIG_ACPI_EC_DEBUGFS=m -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_FAN=y -CONFIG_ACPI_TAD=m -CONFIG_ACPI_DOCK=y -CONFIG_ACPI_CPU_FREQ_PSS=y -CONFIG_ACPI_PROCESSOR_CSTATE=y -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_IPMI=m -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_PROCESSOR_AGGREGATOR=m -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_CUSTOM_DSDT_FILE="" -CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y -CONFIG_ACPI_TABLE_UPGRADE=y -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_PCI_SLOT=y -CONFIG_ACPI_CONTAINER=y -CONFIG_ACPI_HOTPLUG_MEMORY=y -CONFIG_ACPI_HOTPLUG_IOAPIC=y -CONFIG_ACPI_SBS=m -CONFIG_ACPI_HED=y -# CONFIG_ACPI_CUSTOM_METHOD is not set -CONFIG_ACPI_BGRT=y -# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set -CONFIG_HAVE_ACPI_APEI=y -CONFIG_HAVE_ACPI_APEI_NMI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y -CONFIG_ACPI_APEI_EINJ=m -# CONFIG_ACPI_APEI_ERST_DEBUG is not set -CONFIG_DPTF_POWER=m -CONFIG_ACPI_WATCHDOG=y -CONFIG_ACPI_EXTLOG=m -# CONFIG_PMIC_OPREGION is not set -CONFIG_ACPI_CONFIGFS=m -CONFIG_X86_PM_TIMER=y -CONFIG_SFI=y -CONFIG_X86_APM_BOOT=y -CONFIG_APM=m -# CONFIG_APM_IGNORE_USER_SUSPEND is not set -# CONFIG_APM_DO_ENABLE is not set -# CONFIG_APM_CPU_IDLE is not set -# CONFIG_APM_DISPLAY_BLANK is not set -# CONFIG_APM_ALLOW_INTS is not set - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_X86_INTEL_PSTATE=y -CONFIG_X86_PCC_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ_CPB=y -CONFIG_X86_SFI_CPUFREQ=m -CONFIG_X86_POWERNOW_K6=m -CONFIG_X86_POWERNOW_K7=m -CONFIG_X86_POWERNOW_K7_ACPI=y -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_AMD_FREQ_SENSITIVITY=m -CONFIG_X86_GX_SUSPMOD=m -CONFIG_X86_SPEEDSTEP_CENTRINO=y -CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y -CONFIG_X86_SPEEDSTEP_ICH=y -CONFIG_X86_SPEEDSTEP_SMI=y -CONFIG_X86_P4_CLOCKMOD=m -CONFIG_X86_CPUFREQ_NFORCE2=y -CONFIG_X86_LONGRUN=m -CONFIG_X86_LONGHAUL=m -# CONFIG_X86_E_POWERSAVER is not set - -# -# shared options -# -CONFIG_X86_SPEEDSTEP_LIB=y -CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y -# end of CPU Frequency scaling - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_GOV_TEO=y -# end of CPU Idle - -CONFIG_INTEL_IDLE=y -# end of Power management and ACPI options - -# -# Bus options (PCI etc.) -# -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_XEN=y -# CONFIG_PCI_CNB20LE_QUIRK is not set -# CONFIG_ISA_BUS is not set -CONFIG_ISA_DMA_API=y -CONFIG_ISA=y -CONFIG_SCx200=m -CONFIG_SCx200HR_TIMER=m -CONFIG_ALIX=y -CONFIG_NET5501=y -CONFIG_GEOS=y -CONFIG_AMD_NB=y -# CONFIG_X86_SYSFB is not set -# end of Bus options (PCI etc.) - -# -# Binary Emulations -# -CONFIG_COMPAT_32=y -# end of Binary Emulations - -CONFIG_HAVE_ATOMIC_IOMAP=y -CONFIG_HAVE_GENERIC_GUP=y - -# -# Firmware Drivers -# -CONFIG_EDD=y -CONFIG_EDD_OFF=y -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=m -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m -CONFIG_FW_CFG_SYSFS=m -# CONFIG_FW_CFG_SYSFS_CMDLINE is not set -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=y -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set -CONFIG_EFI_RUNTIME_MAP=y -# CONFIG_EFI_FAKE_MEMMAP is not set -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_BOOTLOADER_CONTROL=m -CONFIG_EFI_CAPSULE_LOADER=y -CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH=y -# CONFIG_EFI_TEST is not set -CONFIG_APPLE_PROPERTIES=y -CONFIG_RESET_ATTACK_MITIGATION=y -# end of EFI (Extensible Firmware Interface) Support - -CONFIG_UEFI_CPER=y -CONFIG_UEFI_CPER_X86=y -CONFIG_EFI_DEV_PATH_PARSER=y -CONFIG_EFI_EARLYCON=y - -# -# Tegra firmware driver -# -# end of Tegra firmware driver -# end of Firmware Drivers - -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_ASYNC_PF=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -# CONFIG_KVM_MMU_AUDIT is not set -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_HOTPLUG_SMT=y -CONFIG_OPROFILE=m -# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_OPROFILE_NMI_TIMER=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_KPROBES_ON_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SET_DIRECT_MAP=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y -CONFIG_HAVE_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_PERF_EVENTS_NMI=y -CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_STACKLEAK=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOVE_PMD=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=8 -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_ISA_BUS_API=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y -CONFIG_64BIT_TIME=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_REFCOUNT=y -CONFIG_REFCOUNT_FULL=y -CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -# CONFIG_LOCK_EVENT_COUNTS is not set - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_PLUGIN_HOSTCC="g++" -CONFIG_HAVE_GCC_PLUGINS=y -CONFIG_GCC_PLUGINS=y - -# -# GCC plugins -# -# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set -# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set -# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -# end of GCC plugins -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_ZONED=y -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -CONFIG_BLK_CMDLINE_PARSER=y -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_DEBUG_FS_ZONED=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -CONFIG_AIX_PARTITION=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -CONFIG_SGI_PARTITION=y -CONFIG_ULTRIX_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SYSV68_PARTITION=y -CONFIG_CMDLINE_PARTITION=y -# end of Partition Types - -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -# CONFIG_BFQ_GROUP_IOSCHED is not set -# end of IO Schedulers - -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_STATIC=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_MEMORY_HOTPLUG=y -CONFIG_MEMORY_HOTPLUG_SPARSE=y -# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set -CONFIG_MEMORY_HOTREMOVE=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_TRANSPARENT_HUGE_PAGECACHE=y -CONFIG_CLEANCACHE=y -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_ZSWAP=y -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -CONFIG_Z3FOLD=m -CONFIG_ZSMALLOC=y -CONFIG_PGTABLE_MAPPING=y -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_FRAME_VECTOR=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -CONFIG_ARCH_HAS_PTE_SPECIAL=y -# end of Memory Management options - -CONFIG_NET=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -CONFIG_TLS=m -# CONFIG_TLS_DEVICE is not set -CONFIG_XFRM=y -CONFIG_XFRM_OFFLOAD=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -CONFIG_XFRM_STATISTICS=y -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_ESP_OFFLOAD=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -CONFIG_INET_RAW_DIAG=m -# CONFIG_INET_DIAG_DESTROY is not set -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_ESP_OFFLOAD=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -# CONFIG_IPV6_SEG6_LWTUNNEL is not set -# CONFIG_IPV6_SEG6_HMAC is not set -CONFIG_NETLABEL=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_SET=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_FLOW_OFFLOAD=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m - -# -# DECnet: Netfilter Configuration -# -CONFIG_DECNET_NF_GRABULATOR=m -# end of DECnet: Netfilter Configuration - -CONFIG_NF_TABLES_BRIDGE=y -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -# CONFIG_IP_DCCP_CCID3 is not set -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_LTPC=m -CONFIG_COPS=m -CONFIG_COPS_DAYNA=y -CONFIG_COPS_TANGENT=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_CBS=m -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_SAMPLE=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=y -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VMWARE_VMCI_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_HYPERV_VSOCKETS=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=m -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -CONFIG_HSR=m -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -CONFIG_NET_NCSI=y -# CONFIG_NCSI_OEM_CMD_GET_MAC is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -# CONFIG_BPF_JIT is not set -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NET_DROP_MONITOR is not set -# end of Network testing -# end of Networking options - -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -CONFIG_AX25_DAMA_SLAVE=y -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_SCC=m -# CONFIG_SCC_DELAY is not set -# CONFIG_SCC_TRXECHO is not set -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_BAYCOM_EPP=m -CONFIG_YAM=m -# end of AX.25 network device drivers - -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -CONFIG_CAN_VXCAN=m -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_JANZ_ICAN3=m -CONFIG_PCH_CAN=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_CAN_C_CAN_PCI=m -CONFIG_CAN_CC770=m -CONFIG_CAN_CC770_ISA=m -CONFIG_CAN_CC770_PLATFORM=m -CONFIG_CAN_IFI_CANFD=m -CONFIG_CAN_M_CAN=m -CONFIG_CAN_PEAK_PCIEFD=m -CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_EMS_PCMCIA=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCMCIA=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_TSCAN1=m -CONFIG_CAN_SOFTING=m -CONFIG_CAN_SOFTING_CS=m - -# -# CAN SPI interfaces -# -CONFIG_CAN_HI311X=m -CONFIG_CAN_MCP251X=m -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_MCBA_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -# CONFIG_BT_LEDS is not set -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_SERDEV=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_NOKIA=m -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_BT_HCIUART_RTL=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_WILINK=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_MTKUART=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -# CONFIG_RXKAD is not set -CONFIG_AF_KCM=m -CONFIG_STREAM_PARSER=y -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -CONFIG_CFG80211_DEBUGFS=y -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -CONFIG_MAC80211_DEBUGFS=y -CONFIG_MAC80211_MESSAGE_TRACING=y -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=y -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -CONFIG_RFKILL_GPIO=m -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -CONFIG_NET_9P_XEN=m -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -CONFIG_CAIF=m -# CONFIG_CAIF_DEBUG is not set -CONFIG_CAIF_NETDEV=m -CONFIG_CAIF_USB=m -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -CONFIG_NFC_NCI=m -CONFIG_NFC_NCI_SPI=m -CONFIG_NFC_NCI_UART=m -CONFIG_NFC_HCI=m -CONFIG_NFC_SHDLC=y - -# -# Near Field Communication (NFC) devices -# -CONFIG_NFC_TRF7970A=m -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_FDP=m -CONFIG_NFC_FDP_I2C=m -CONFIG_NFC_PN544=m -CONFIG_NFC_PN544_I2C=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -CONFIG_NFC_PN533_I2C=m -CONFIG_NFC_MICROREAD=m -CONFIG_NFC_MICROREAD_I2C=m -CONFIG_NFC_MRVL=m -CONFIG_NFC_MRVL_USB=m -CONFIG_NFC_MRVL_UART=m -CONFIG_NFC_MRVL_I2C=m -CONFIG_NFC_MRVL_SPI=m -CONFIG_NFC_ST21NFCA=m -CONFIG_NFC_ST21NFCA_I2C=m -CONFIG_NFC_ST_NCI=m -CONFIG_NFC_ST_NCI_I2C=m -CONFIG_NFC_ST_NCI_SPI=m -CONFIG_NFC_NXP_NCI=m -CONFIG_NFC_NXP_NCI_I2C=m -CONFIG_NFC_S3FWRN5=m -CONFIG_NFC_S3FWRN5_I2C=m -CONFIG_NFC_ST95HF=m -# end of Near Field Communication (NFC) devices - -CONFIG_PSAMPLE=m -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_SOCK_MSG=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=y -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_HAVE_EISA=y -CONFIG_EISA=y -CONFIG_EISA_VLB_PRIMING=y -CONFIG_EISA_PCI_EISA=y -CONFIG_EISA_VIRTUAL_ROOT=y -CONFIG_EISA_NAMES=y -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -# CONFIG_PCIEAER_INJECT is not set -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEBUG=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_REALLOC_ENABLE_AUTO=y -CONFIG_PCI_STUB=m -# CONFIG_PCI_PF_STUB is not set -CONFIG_XEN_PCIDEV_FRONTEND=m -CONFIG_PCI_ATS=y -CONFIG_PCI_LOCKLESS_CONFIG=y -CONFIG_PCI_IOV=y -CONFIG_PCI_PRI=y -CONFIG_PCI_PASID=y -CONFIG_PCI_LABEL=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_COMPAQ=m -CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y -CONFIG_HOTPLUG_PCI_IBM=m -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -CONFIG_HOTPLUG_PCI_CPCI=y -CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m -CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m -CONFIG_HOTPLUG_PCI_SHPC=y - -# -# PCI controller drivers -# - -# -# Cadence PCIe controllers support -# -# end of Cadence PCIe controllers support - -# -# DesignWare PCI Core Support -# -# CONFIG_PCIE_DW_PLAT_HOST is not set -# CONFIG_PCI_MESON is not set -# end of DesignWare PCI Core Support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -CONFIG_PCI_SW_SWITCHTEC=m -# end of PCI switch controller drivers - -CONFIG_PCCARD=m -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_I82365=m -CONFIG_TCIC=m -CONFIG_PCMCIA_PROBE=y -CONFIG_PCCARD_NONSTATIC=y -CONFIG_RAPIDIO=y -CONFIG_RAPIDIO_TSI721=m -CONFIG_RAPIDIO_DISC_TIMEOUT=30 -# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set -CONFIG_RAPIDIO_DMA_ENGINE=y -# CONFIG_RAPIDIO_DEBUG is not set -CONFIG_RAPIDIO_ENUM_BASIC=m -CONFIG_RAPIDIO_CHMAN=m -CONFIG_RAPIDIO_MPORT_CDEV=m - -# -# RapidIO Switch drivers -# -CONFIG_RAPIDIO_TSI57X=m -CONFIG_RAPIDIO_CPS_XX=m -CONFIG_RAPIDIO_TSI568=m -CONFIG_RAPIDIO_CPS_GEN2=m -CONFIG_RAPIDIO_RXS_GEN3=m -# end of RapidIO Switch drivers - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_SPMI=m -CONFIG_REGMAP_W1=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -# end of Generic Driver Options - -# -# Bus devices -# -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_GNSS_SERIAL=m -CONFIG_GNSS_MTK_SERIAL=m -CONFIG_GNSS_SIRF_SERIAL=m -CONFIG_GNSS_UBX_SERIAL=m -CONFIG_MTD=m -# CONFIG_MTD_TESTS is not set -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AR7_PARTS=m - -# -# Partition parsers -# -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_SM_FTL=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set -CONFIG_MTD_SBC_GXX=m -CONFIG_MTD_SCx200_DOCFLASH=m -CONFIG_MTD_AMD76XROM=m -CONFIG_MTD_ICHXROM=m -CONFIG_MTD_ESB2ROM=m -CONFIG_MTD_CK804XROM=m -CONFIG_MTD_SCB2_FLASH=m -CONFIG_MTD_NETtel=m -CONFIG_MTD_L440GX=m -CONFIG_MTD_PCI=m -CONFIG_MTD_PCMCIA=m -# CONFIG_MTD_PCMCIA_ANONYMOUS is not set -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -# CONFIG_MTD_PMC551_BUGFIX is not set -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -CONFIG_MTD_DATAFLASH_OTP=y -CONFIG_MTD_M25P80=m -CONFIG_MTD_MCHP23K256=m -CONFIG_MTD_SST25L=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLOCK2MTD=m - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOCG3=m -CONFIG_BCH_CONST_M=14 -CONFIG_BCH_CONST_T=4 -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -CONFIG_MTD_NAND_DENALI=m -CONFIG_MTD_NAND_DENALI_PCI=m -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_CS553X=m -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_PLATFORM=m - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_SPI_MTK_QUADSPI=m -CONFIG_SPI_INTEL_SPI=m -CONFIG_SPI_INTEL_SPI_PCI=m -CONFIG_SPI_INTEL_SPI_PLATFORM=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_OF is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_SERIAL=m -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_PC_PCMCIA=m -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_ISAPNP=y -CONFIG_PNPBIOS=y -CONFIG_PNPBIOS_PROC_FS=y -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_BLK_DEV_FD=m -CONFIG_CDROM=y -CONFIG_PARIDE=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=y -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=y -# CONFIG_VIRTIO_BLK_SCSI is not set -CONFIG_BLK_DEV_RBD=m -CONFIG_BLK_DEV_RSXX=m - -# -# NVME Support -# -CONFIG_NVME_CORE=y -CONFIG_BLK_DEV_NVME=y -# CONFIG_NVME_MULTIPATH is not set -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -CONFIG_NVME_FC=m -CONFIG_NVME_TCP=m -CONFIG_NVME_TARGET=m -CONFIG_NVME_TARGET_LOOP=m -CONFIG_NVME_TARGET_RDMA=m -CONFIG_NVME_TARGET_FC=m -CONFIG_NVME_TARGET_FCLOOP=m -CONFIG_NVME_TARGET_TCP=m -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -CONFIG_DUMMY_IRQ=m -CONFIG_IBM_ASM=m -CONFIG_PHANTOM=m -CONFIG_INTEL_MID_PTI=m -CONFIG_SGI_IOC4=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -# CONFIG_CS5535_MFGPT is not set -CONFIG_HP_ILO=m -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -CONFIG_VMWARE_BALLOON=m -CONFIG_PCH_PHUB=m -CONFIG_USB_SWITCH_FSA9480=m -CONFIG_LATTICE_ECP3_CONFIG=m -CONFIG_SRAM=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_MISC_RTSX=m -CONFIG_PVPANIC=m -CONFIG_C2PORT=m -CONFIG_C2PORT_DURAMAR_2150=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -CONFIG_EEPROM_93XX46=m -CONFIG_EEPROM_IDT_89HPESX=m -CONFIG_EEPROM_EE1004=m -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m -# CONFIG_INTEL_MEI is not set -# CONFIG_INTEL_MEI_ME is not set -# CONFIG_INTEL_MEI_TXE is not set -# CONFIG_INTEL_MEI_HDCP is not set -CONFIG_VMWARE_VMCI=m - -# -# Intel MIC & related support -# - -# -# Intel MIC Bus Driver -# - -# -# SCIF Bus Driver -# - -# -# VOP Bus Driver -# -CONFIG_VOP_BUS=m - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# - -# -# SCIF Driver -# - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# - -# -# VOP Driver -# -CONFIG_VOP=m -CONFIG_VHOST_RING=m -# end of Intel MIC & related support - -CONFIG_ECHO=m -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -CONFIG_HABANA_AI=m -# end of Misc devices - -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AHA1740=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=5000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_ARCMSR=m -CONFIG_SCSI_ESAS2R=m -CONFIG_MEGARAID_NEWGEN=y -CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -CONFIG_SCSI_UFSHCD_PLATFORM=m -CONFIG_SCSI_UFS_CDNS_PLATFORM=m -# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_BUSLOGIC=m -CONFIG_SCSI_FLASHPOINT=y -CONFIG_SCSI_MYRB=m -CONFIG_SCSI_MYRS=m -CONFIG_VMWARE_PVSCSI=m -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_HYPERV_STORAGE=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_FCOE_FNIC=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_ISCI=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -CONFIG_SCSI_IPR=m -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -# CONFIG_TCM_QLA2XXX_DEBUG is not set -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_QEDI=m -CONFIG_QEDF=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -CONFIG_SCSI_SIM710=m -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_NSP32=m -CONFIG_SCSI_WD719X=m -CONFIG_SCSI_DEBUG=m -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_LOWLEVEL_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_ATA=y -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_ACPI=y -CONFIG_SATA_ZPODD=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -CONFIG_SATA_INIC162X=m -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=y -CONFIG_SATA_DWC=m -# CONFIG_SATA_DWC_OLD_DMA is not set -# CONFIG_SATA_DWC_DEBUG is not set -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CS5520=m -CONFIG_PATA_CS5530=m -CONFIG_PATA_CS5535=m -CONFIG_PATA_CS5536=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m -# CONFIG_PATA_HPT3X3_DMA is not set -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_OPTIDMA=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RDC=m -CONFIG_PATA_SC1200=m -CONFIG_PATA_SCH=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_SIL680=m -CONFIG_PATA_SIS=y -CONFIG_PATA_TOSHIBA=m -CONFIG_PATA_TRIFLEX=m -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m - -# -# PIO-only SFF controllers -# -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_ISAPNP=m -CONFIG_PATA_MPIIX=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PLATFORM=m -CONFIG_PATA_QDI=m -CONFIG_PATA_RZ1000=m -CONFIG_PATA_WINBOND_VLB=m - -# -# Generic fallback / legacy drivers -# -CONFIG_PATA_ACPI=m -CONFIG_ATA_GENERIC=y -CONFIG_PATA_LEGACY=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_AUTODETECT=y -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_MD_CLUSTER=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_UNSTRIPED=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_WRITECACHE=m -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -# CONFIG_DM_INIT is not set -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -CONFIG_DM_INTEGRITY=m -CONFIG_DM_ZONED=m -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_FUSION_LOGGING=y - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_MAC_EMUMOUSEBTN=m -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_EQUALIZER=m -CONFIG_NET_FC=y -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -CONFIG_IPVTAP=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_NTB_NETDEV=m -CONFIG_RIONET=m -CONFIG_RIONET_TX_SIZE=128 -CONFIG_RIONET_RX_SIZE=128 -CONFIG_TUN=y -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=m -CONFIG_NET_VRF=m -CONFIG_VSOCKMON=m -CONFIG_SUNGEM_PHY=m -CONFIG_ARCNET=m -CONFIG_ARCNET_1201=m -CONFIG_ARCNET_1051=m -CONFIG_ARCNET_RAW=m -CONFIG_ARCNET_CAP=m -CONFIG_ARCNET_COM90xx=m -CONFIG_ARCNET_COM90xxIO=m -CONFIG_ARCNET_RIM_I=m -CONFIG_ARCNET_COM20020=m -CONFIG_ARCNET_COM20020_ISA=m -CONFIG_ARCNET_COM20020_PCI=m -CONFIG_ARCNET_COM20020_CS=m -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m -CONFIG_ATM_LANAI=m -CONFIG_ATM_ENI=m -# CONFIG_ATM_ENI_DEBUG is not set -# CONFIG_ATM_ENI_TUNE_BURST is not set -CONFIG_ATM_FIRESTREAM=m -CONFIG_ATM_ZATM=m -# CONFIG_ATM_ZATM_DEBUG is not set -CONFIG_ATM_NICSTAR=m -# CONFIG_ATM_NICSTAR_USE_SUNI is not set -# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set -CONFIG_ATM_IDT77252=m -# CONFIG_ATM_IDT77252_DEBUG is not set -# CONFIG_ATM_IDT77252_RCV_ALL is not set -CONFIG_ATM_IDT77252_USE_SUNI=y -CONFIG_ATM_AMBASSADOR=m -# CONFIG_ATM_AMBASSADOR_DEBUG is not set -CONFIG_ATM_HORIZON=m -# CONFIG_ATM_HORIZON_DEBUG is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_HE=m -CONFIG_ATM_HE_USE_SUNI=y -CONFIG_ATM_SOLOS=m - -# -# CAIF transport drivers -# -CONFIG_CAIF_TTY=m -CONFIG_CAIF_SPI_SLAVE=m -# CONFIG_CAIF_SPI_SYNC is not set -CONFIG_CAIF_HSI=m -CONFIG_CAIF_VIRTIO=m - -# -# Distributed Switch Architecture drivers -# -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_B53_SERDES=m -CONFIG_NET_DSA_BCM_SF2=m -# CONFIG_NET_DSA_LOOP is not set -CONFIG_NET_DSA_LANTIQ_GSWIP=m -CONFIG_NET_DSA_MT7530=m -CONFIG_NET_DSA_MV88E6060=m -CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_SJA1105=m -CONFIG_NET_DSA_QCA8K=m -CONFIG_NET_DSA_REALTEK_SMI=m -CONFIG_NET_DSA_SMSC_LAN9303=m -CONFIG_NET_DSA_SMSC_LAN9303_I2C=m -CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL3=m -CONFIG_3C515=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_3C589=m -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -CONFIG_SLICOSS=m -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_ALTERA_TSE=m -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -CONFIG_AMD8111_ETH=m -CONFIG_LANCE=m -CONFIG_PCNET32=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_NI65=m -CONFIG_AMD_XGBE=m -# CONFIG_AMD_XGBE_DCB is not set -CONFIG_AMD_XGBE_HAVE_ECC=y -CONFIG_NET_VENDOR_AQUANTIA=y -CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=m -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_BCMGENET=m -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -CONFIG_MACB=m -CONFIG_MACB_USE_HWSTAMP=y -CONFIG_MACB_PCI=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CIRRUS=y -CONFIG_CS89x0=m -CONFIG_CS89x0_PLATFORM=y -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -# CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_CX_ECAT=m -CONFIG_DNET=m -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_NET_VENDOR_HP=y -CONFIG_HP100=m -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_HINIC=m -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_E1000E_HWTS=y -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBE_IPSEC=y -CONFIG_IXGBEVF=m -CONFIG_IXGBEVF_IPSEC=y -CONFIG_I40E=m -CONFIG_I40E_DCB=y -CONFIG_IAVF=m -CONFIG_I40EVF=m -CONFIG_ICE=m -CONFIG_FM10K=m -CONFIG_IGC=m -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -CONFIG_MLXSW_CORE=m -CONFIG_MLXSW_CORE_HWMON=y -CONFIG_MLXSW_CORE_THERMAL=y -CONFIG_MLXSW_PCI=m -CONFIG_MLXSW_I2C=m -CONFIG_MLXSW_SWITCHIB=m -CONFIG_MLXSW_SWITCHX2=m -CONFIG_MLXSW_SPECTRUM=m -CONFIG_MLXSW_SPECTRUM_DCB=y -CONFIG_MLXSW_MINIMAL=m -CONFIG_MLXFW=m -CONFIG_NET_VENDOR_MICREL=y -CONFIG_KS8842=m -CONFIG_KS8851=m -CONFIG_KS8851_MLL=m -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_ENC28J60=m -# CONFIG_ENC28J60_WRITEVERIFY is not set -CONFIG_ENCX24J600=m -CONFIG_LAN743X=m -CONFIG_NET_VENDOR_MICROSEMI=y -CONFIG_MSCC_OCELOT_SWITCH=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -# CONFIG_NFP_APP_FLOWER is not set -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -CONFIG_NI_XGE_MANAGEMENT_ENET=m -CONFIG_NET_VENDOR_8390=y -CONFIG_PCMCIA_AXNET=m -CONFIG_NE2000=m -CONFIG_NE2K_PCI=m -CONFIG_PCMCIA_PCNET=m -CONFIG_ULTRA=m -CONFIG_WD80x3=m -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_FORCEDETH=m -CONFIG_NET_VENDOR_OKI=y -CONFIG_PCH_GBE=m -CONFIG_ETHOC=m -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QED_LL2=y -CONFIG_QED_SRIOV=y -CONFIG_QEDE=m -CONFIG_QED_ISCSI=y -CONFIG_QED_FCOE=y -CONFIG_QED_OOO=y -CONFIG_NET_VENDOR_QUALCOMM=y -CONFIG_QCOM_EMAC=m -CONFIG_RMNET=m -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_ATP=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -CONFIG_ROCKER=m -CONFIG_NET_VENDOR_SAMSUNG=y -CONFIG_SXGBE_ETH=m -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -CONFIG_SIS900=m -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC9194=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -# CONFIG_NET_VENDOR_SOCIONEXT is not set -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -CONFIG_STMMAC_PLATFORM=m -CONFIG_DWMAC_GENERIC=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -CONFIG_DWC_XLGMAC=m -CONFIG_DWC_XLGMAC_PCI=m -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -# CONFIG_TI_CPSW_PHY_SEL is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -CONFIG_WIZNET_W5100=m -CONFIG_WIZNET_W5300=m -# CONFIG_WIZNET_BUS_DIRECT is not set -# CONFIG_WIZNET_BUS_INDIRECT is not set -CONFIG_WIZNET_BUS_ANY=y -# CONFIG_WIZNET_W5100_SPI is not set -CONFIG_NET_VENDOR_XILINX=y -CONFIG_XILINX_LL_TEMAC=m -CONFIG_NET_VENDOR_XIRCOM=y -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -CONFIG_NET_SB1000=m -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BCM_UNIMAC=m -CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_GPIO=m -CONFIG_MDIO_I2C=m -CONFIG_MDIO_MSCC_MIIM=m -CONFIG_PHYLINK=m -CONFIG_PHYLIB=y -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -CONFIG_SFP=m -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_CORTINA_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_DP83822_PHY=m -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_FIXED_PHY=y -CONFIG_ICPLUS_PHY=m -CONFIG_INTEL_XWAY_PHY=m -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_RENESAS_PHY=m -CONFIG_ROCKCHIP_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_XILINX_GMII2RGMII=m -CONFIG_MICREL_KS8995MA=m -CONFIG_PLIP=m -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_COMMON_DEBUG=y -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -CONFIG_ATH9K_AHB=y -CONFIG_ATH9K_DEBUGFS=y -CONFIG_ATH9K_STATION_STATISTICS=y -# CONFIG_ATH9K_DYNACK is not set -CONFIG_ATH9K_WOW=y -CONFIG_ATH9K_RFKILL=y -CONFIG_ATH9K_CHANNEL_CONTEXT=y -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_HTC=m -CONFIG_ATH9K_HTC_DEBUGFS=y -CONFIG_ATH9K_HWRNG=y -# CONFIG_ATH9K_COMMON_SPECTRAL is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -# CONFIG_CARL9170_DEBUGFS is not set -CONFIG_CARL9170_WPC=y -CONFIG_CARL9170_HWRNG=y -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -CONFIG_ATH10K_SDIO=m -CONFIG_ATH10K_USB=m -# CONFIG_ATH10K_DEBUG is not set -CONFIG_ATH10K_DEBUGFS=y -# CONFIG_ATH10K_SPECTRAL is not set -CONFIG_ATH10K_TRACING=y -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set -CONFIG_WLAN_VENDOR_ATMEL=y -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -# CONFIG_B43_SDIO is not set -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -CONFIG_BRCM_TRACING=y -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_AIRO=m -CONFIG_AIRO_CS=m -CONFIG_WLAN_VENDOR_INTEL=y -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -CONFIG_IWLEGACY_DEBUGFS=y -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -CONFIG_IWLWIFI_DEBUGFS=y -CONFIG_IWLWIFI_DEVICE_TRACING=y -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_HERMES=m -# CONFIG_HERMES_PRISM is not set -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ORINOCO_USB=m -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_P54_SPI=m -# CONFIG_P54_SPI_DEFAULT_EEPROM is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_MWIFIEX_USB=m -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_LIB_DEBUGFS is not set -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -CONFIG_RTL8XXXU_UNTESTED=y -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -# CONFIG_RSI_DEBUGFS is not set -CONFIG_RSI_SDIO=m -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -CONFIG_CW1200=m -CONFIG_CW1200_WLAN_SDIO=m -CONFIG_CW1200_WLAN_SPI=m -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -CONFIG_USB_ZD1201=m -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_QTNFMAC=m -CONFIG_QTNFMAC_PCIE=m -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -CONFIG_WAN=y -CONFIG_HOSTESS_SV11=m -CONFIG_COSA=m -CONFIG_LANMEDIA=m -CONFIG_SEALEVEL_4021=m -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -CONFIG_PC300TOO=m -CONFIG_N2=m -CONFIG_C101=m -CONFIG_FARSYNC=m -CONFIG_DSCC4=m -CONFIG_DSCC4_PCISYNC=y -CONFIG_DSCC4_PCI_RST=y -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_SDLA=m -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_SBNI=m -# CONFIG_SBNI_MULTILINE is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -CONFIG_IEEE802154_AT86RF230_DEBUGFS=y -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -CONFIG_IEEE802154_CA8210=m -# CONFIG_IEEE802154_CA8210_DEBUGFS is not set -CONFIG_IEEE802154_MCR20A=m -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=y -CONFIG_XEN_NETDEV_BACKEND=m -CONFIG_VMXNET3=m -CONFIG_FUJITSU_ES=m -CONFIG_THUNDERBOLT_NET=m -CONFIG_HYPERV_NET=m -CONFIG_NETDEVSIM=m -CONFIG_NET_FAILOVER=y -CONFIG_ISDN=y -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y -CONFIG_ISDN_X25=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DIVERSION=m -# end of ISDN feature submodules - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -# CONFIG_HISAX_NO_SENDCOMPLETE is not set -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# -CONFIG_HISAX_SEDLBAUER_CS=m -CONFIG_HISAX_ELSA_CS=m -CONFIG_HISAX_AVM_A1_CS=m -CONFIG_HISAX_TELES_CS=m - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -CONFIG_HISAX_HFC4S8S=m -CONFIG_HISAX_FRITZ_PCIPNP=m -# end of Passive cards - -CONFIG_ISDN_CAPI=m -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPIDRV=m -# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set - -# -# CAPI hardware drivers -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_AVM_CS=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_ISDN_DRV_GIGASET=m -# CONFIG_GIGASET_CAPI is not set -CONFIG_GIGASET_I4L=y -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -CONFIG_GIGASET_M101=m -# CONFIG_GIGASET_DEBUG is not set -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y -CONFIG_MISDN=m -CONFIG_MISDN_DSP=m -CONFIG_MISDN_L1OIP=m - -# -# mISDN hardware drivers -# -CONFIG_MISDN_HFCPCI=m -CONFIG_MISDN_HFCMULTI=m -CONFIG_MISDN_HFCUSB=m -CONFIG_MISDN_AVMFRITZ=m -CONFIG_MISDN_SPEEDFAX=m -CONFIG_MISDN_INFINEON=m -CONFIG_MISDN_W6692=m -CONFIG_MISDN_NETJET=m -CONFIG_MISDN_IPAC=m -CONFIG_MISDN_ISAR=m -CONFIG_ISDN_HDLC=m -CONFIG_NVM=y -CONFIG_NVM_PBLK=m -# CONFIG_NVM_PBLK_DEBUG is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=m -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_ADP5520=m -CONFIG_KEYBOARD_ADP5588=m -CONFIG_KEYBOARD_ADP5589=m -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m -CONFIG_KEYBOARD_DLINK_DIR685=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_GPIO_POLLED=m -CONFIG_KEYBOARD_TCA6416=m -CONFIG_KEYBOARD_TCA8418=m -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_LM8323=m -CONFIG_KEYBOARD_LM8333=m -CONFIG_KEYBOARD_MAX7359=m -CONFIG_KEYBOARD_MCS=m -CONFIG_KEYBOARD_MPR121=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_OPENCORES=m -CONFIG_KEYBOARD_SAMSUNG=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_TM2_TOUCHKEY=m -CONFIG_KEYBOARD_TWL4030=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_KEYBOARD_CROS_EC=m -CONFIG_KEYBOARD_MTK_PMIC=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_VMMOUSE=y -CONFIG_MOUSE_PS2_SMBUS=y -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_CYAPA=m -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -CONFIG_MOUSE_ELAN_I2C_SMBUS=y -# CONFIG_MOUSE_INPORT is not set -CONFIG_MOUSE_LOGIBM=m -CONFIG_MOUSE_PC110PAD=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_AS5011=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_JOYSTICK_WALKERA0701=m -CONFIG_JOYSTICK_PSXPAD_SPI=m -# CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set -CONFIG_JOYSTICK_PXRC=m -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_88PM860X=m -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_AD7877=m -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -CONFIG_TOUCHSCREEN_AD7879_SPI=m -CONFIG_TOUCHSCREEN_ADC=m -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -CONFIG_TOUCHSCREEN_AUO_PIXCIR=m -CONFIG_TOUCHSCREEN_BU21013=m -CONFIG_TOUCHSCREEN_BU21029=m -CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m -CONFIG_TOUCHSCREEN_CY8CTMG110=m -CONFIG_TOUCHSCREEN_CYTTSP_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP_SPI=m -CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m -CONFIG_TOUCHSCREEN_DA9034=m -CONFIG_TOUCHSCREEN_DA9052=m -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m -CONFIG_TOUCHSCREEN_EXC3000=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_HIDEEP=m -CONFIG_TOUCHSCREEN_ILI210X=m -CONFIG_TOUCHSCREEN_S6SY761=m -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_TOUCHSCREEN_EKTF2127=m -CONFIG_TOUCHSCREEN_ELAN=m -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -CONFIG_TOUCHSCREEN_WACOM_I2C=m -CONFIG_TOUCHSCREEN_MAX11801=m -CONFIG_TOUCHSCREEN_MCS5000=m -CONFIG_TOUCHSCREEN_MMS114=m -CONFIG_TOUCHSCREEN_MELFAS_MIP4=m -CONFIG_TOUCHSCREEN_MTOUCH=m -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_HTCPEN=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -CONFIG_TOUCHSCREEN_EDT_FT5X06=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_PIXCIR=m -CONFIG_TOUCHSCREEN_WDT87XX_I2C=m -CONFIG_TOUCHSCREEN_WM831X=m -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -CONFIG_TOUCHSCREEN_TSC_SERIO=m -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -CONFIG_TOUCHSCREEN_TSC2004=m -CONFIG_TOUCHSCREEN_TSC2005=m -CONFIG_TOUCHSCREEN_TSC2007=m -# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set -CONFIG_TOUCHSCREEN_PCAP=m -CONFIG_TOUCHSCREEN_RM_TS=m -CONFIG_TOUCHSCREEN_SILEAD=m -CONFIG_TOUCHSCREEN_SIS_I2C=m -CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_STMFTS=m -CONFIG_TOUCHSCREEN_SUR40=m -CONFIG_TOUCHSCREEN_SURFACE3_SPI=m -CONFIG_TOUCHSCREEN_SX8654=m -CONFIG_TOUCHSCREEN_TPS6507X=m -CONFIG_TOUCHSCREEN_ZET6223=m -CONFIG_TOUCHSCREEN_ZFORCE=m -CONFIG_TOUCHSCREEN_ROHM_BU21023=m -CONFIG_TOUCHSCREEN_IQS5XX=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_88PM860X_ONKEY=m -CONFIG_INPUT_88PM80X_ONKEY=m -CONFIG_INPUT_AD714X=m -CONFIG_INPUT_AD714X_I2C=m -CONFIG_INPUT_AD714X_SPI=m -CONFIG_INPUT_ARIZONA_HAPTICS=m -CONFIG_INPUT_BMA150=m -CONFIG_INPUT_E3X0_BUTTON=m -CONFIG_INPUT_MSM_VIBRATOR=m -CONFIG_INPUT_PCSPKR=m -CONFIG_INPUT_MAX77693_HAPTIC=m -CONFIG_INPUT_MAX8925_ONKEY=m -CONFIG_INPUT_MAX8997_HAPTIC=m -CONFIG_INPUT_MC13783_PWRBUTTON=m -CONFIG_INPUT_MMA8450=m -CONFIG_INPUT_APANEL=m -CONFIG_INPUT_GP2A=m -CONFIG_INPUT_GPIO_BEEPER=m -CONFIG_INPUT_GPIO_DECODER=m -CONFIG_INPUT_GPIO_VIBRA=m -CONFIG_INPUT_WISTRON_BTNS=m -CONFIG_INPUT_ATLAS_BTNS=m -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_KXTJ9=m -# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_REGULATOR_HAPTIC=m -CONFIG_INPUT_RETU_PWRBUTTON=m -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_TWL4030_PWRBUTTON=m -CONFIG_INPUT_TWL4030_VIBRA=m -CONFIG_INPUT_TWL6040_VIBRA=m -CONFIG_INPUT_UINPUT=y -CONFIG_INPUT_PALMAS_PWRBUTTON=m -CONFIG_INPUT_PCF50633_PMU=m -CONFIG_INPUT_PCF8574=m -CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_PWM_VIBRA=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_INPUT_DA9052_ONKEY=m -CONFIG_INPUT_DA9055_ONKEY=m -CONFIG_INPUT_DA9063_ONKEY=m -CONFIG_INPUT_WM831X_ON=m -CONFIG_INPUT_PCAP=m -CONFIG_INPUT_ADXL34X=m -CONFIG_INPUT_ADXL34X_I2C=m -CONFIG_INPUT_ADXL34X_SPI=m -CONFIG_INPUT_IMS_PCU=m -CONFIG_INPUT_CMA3000=m -CONFIG_INPUT_CMA3000_I2C=m -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m -CONFIG_INPUT_IDEAPAD_SLIDEBAR=m -CONFIG_INPUT_SOC_BUTTON_ARRAY=m -CONFIG_INPUT_DRV260X_HAPTICS=m -CONFIG_INPUT_DRV2665_HAPTICS=m -CONFIG_INPUT_DRV2667_HAPTICS=m -CONFIG_INPUT_RAVE_SP_PWRBUTTON=m -CONFIG_RMI4_CORE=m -CONFIG_RMI4_I2C=m -CONFIG_RMI4_SPI=m -CONFIG_RMI4_SMB=m -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -CONFIG_RMI4_F55=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_CT82C710=m -CONFIG_SERIO_PARKBD=m -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -CONFIG_SERIO_ALTERA_PS2=m -CONFIG_SERIO_PS2MULT=m -CONFIG_SERIO_ARC_PS2=m -CONFIG_HYPERV_KEYBOARD=m -CONFIG_SERIO_GPIO_PS2=m -CONFIG_USERIO=m -CONFIG_GAMEPORT=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_GAMEPORT_EMU10K1=m -CONFIG_GAMEPORT_FM801=m -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=0 -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_NOZOMI=m -CONFIG_ISI=m -CONFIG_N_HDLC=m -CONFIG_N_GSM=m -CONFIG_TRACE_ROUTER=m -CONFIG_TRACE_SINK=m -CONFIG_NULL_TTY=m -CONFIG_LDISC_AUTOLOAD=y -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_PNP=y -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_MEN_MCB=m -CONFIG_SERIAL_8250_NR_UARTS=48 -CONFIG_SERIAL_8250_RUNTIME_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_FOURPORT=m -CONFIG_SERIAL_8250_ACCENT=m -CONFIG_SERIAL_8250_BOCA=m -CONFIG_SERIAL_8250_EXAR_ST16C554=m -CONFIG_SERIAL_8250_HUB6=m -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_8250_DW=m -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_8250_LPSS=m -CONFIG_SERIAL_8250_MID=m -CONFIG_SERIAL_8250_MOXA=m - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_KGDB_NMI=y -CONFIG_SERIAL_MAX3100=m -CONFIG_SERIAL_MAX310X=y -CONFIG_SERIAL_UARTLITE=m -CONFIG_SERIAL_UARTLITE_NR_UARTS=1 -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_CONSOLE_POLL=y -CONFIG_SERIAL_JSM=m -CONFIG_SERIAL_SCCNXP=y -CONFIG_SERIAL_SCCNXP_CONSOLE=y -CONFIG_SERIAL_SC16IS7XX_CORE=m -CONFIG_SERIAL_SC16IS7XX=m -CONFIG_SERIAL_SC16IS7XX_I2C=y -CONFIG_SERIAL_SC16IS7XX_SPI=y -CONFIG_SERIAL_TIMBERDALE=m -CONFIG_SERIAL_ALTERA_JTAGUART=m -CONFIG_SERIAL_ALTERA_UART=m -CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 -CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 -# CONFIG_SERIAL_IFX6X60 is not set -CONFIG_SERIAL_PCH_UART=m -CONFIG_SERIAL_ARC=m -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -CONFIG_SERIAL_FSL_LPUART=m -CONFIG_SERIAL_MEN_Z135=m -# end of Serial drivers - -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_TTY_PRINTK=y -CONFIG_TTY_PRINTK_LEVEL=6 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=m -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DMI_DECODE=y -CONFIG_IPMI_PLAT_DATA=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_SSIF=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_HW_RANDOM_INTEL=m -CONFIG_HW_RANDOM_AMD=m -CONFIG_HW_RANDOM_GEODE=m -CONFIG_HW_RANDOM_VIA=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_NVRAM=m -CONFIG_DTLK=m -CONFIG_APPLICOM=m -CONFIG_SONYPI=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m -CONFIG_SCR24X=m -CONFIG_IPWIRELESS=m -# end of PCMCIA character devices - -CONFIG_MWAVE=m -CONFIG_SCx200_GPIO=m -CONFIG_PC8736x_GPIO=m -CONFIG_NSC_GPIO=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 -CONFIG_HPET=y -CONFIG_HPET_MMAP=y -CONFIG_HPET_MMAP_DEFAULT=y -CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=y -CONFIG_HW_RANDOM_TPM=y -CONFIG_TCG_TIS_CORE=y -CONFIG_TCG_TIS=y -CONFIG_TCG_TIS_SPI=m -CONFIG_TCG_TIS_I2C_ATMEL=m -CONFIG_TCG_TIS_I2C_INFINEON=m -CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_TCG_INFINEON=m -CONFIG_TCG_XEN=m -CONFIG_TCG_CRB=y -CONFIG_TCG_VTPM_PROXY=m -CONFIG_TCG_TIS_ST33ZP24=m -CONFIG_TCG_TIS_ST33ZP24_I2C=m -CONFIG_TCG_TIS_ST33ZP24_SPI=m -CONFIG_TELCLOCK=m -CONFIG_DEVPORT=y -CONFIG_XILLYBUS=m -CONFIG_XILLYBUS_PCIE=m -# end of Character devices - -# CONFIG_RANDOM_TRUST_CPU is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_ACPI_I2C_OPREGION=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_MUX_GPIO=m -CONFIG_I2C_MUX_LTC4306=m -CONFIG_I2C_MUX_PCA9541=m -CONFIG_I2C_MUX_PCA954x=m -CONFIG_I2C_MUX_REG=m -CONFIG_I2C_MUX_MLXCPLD=m -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD756_S4882=m -CONFIG_I2C_AMD8111=m -CONFIG_I2C_AMD_MP2=m -CONFIG_I2C_I801=m -CONFIG_I2C_ISCH=m -CONFIG_I2C_ISMT=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_CHT_WC=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_NFORCE2_S4985=m -CONFIG_I2C_NVIDIA_GPU=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m - -# -# ACPI drivers -# -CONFIG_I2C_SCMI=m - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_CBUS_GPIO=m -CONFIG_I2C_DESIGNWARE_CORE=y -CONFIG_I2C_DESIGNWARE_PLATFORM=y -# CONFIG_I2C_DESIGNWARE_SLAVE is not set -CONFIG_I2C_DESIGNWARE_PCI=m -CONFIG_I2C_DESIGNWARE_BAYTRAIL=y -CONFIG_I2C_EG20T=m -CONFIG_I2C_EMEV2=m -CONFIG_I2C_GPIO=m -# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set -CONFIG_I2C_KEMPLD=m -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_XILINX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -CONFIG_I2C_DLN2=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_PCA_ISA=m -CONFIG_I2C_CROS_EC_TUNNEL=m -CONFIG_SCx200_ACB=m -# end of I2C Hardware Bus support - -CONFIG_I2C_STUB=m -CONFIG_I2C_SLAVE=y -CONFIG_I2C_SLAVE_EEPROM=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -CONFIG_I3C=m -CONFIG_CDNS_I3C_MASTER=m -CONFIG_DW_I3C_MASTER=m -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_ALTERA=m -CONFIG_SPI_AXI_SPI_ENGINE=m -CONFIG_SPI_BITBANG=m -CONFIG_SPI_BUTTERFLY=m -CONFIG_SPI_CADENCE=m -CONFIG_SPI_DESIGNWARE=m -CONFIG_SPI_DW_PCI=m -CONFIG_SPI_DW_MID_DMA=y -CONFIG_SPI_DW_MMIO=m -CONFIG_SPI_DLN2=m -CONFIG_SPI_NXP_FLEXSPI=m -CONFIG_SPI_GPIO=m -CONFIG_SPI_LM70_LLP=m -CONFIG_SPI_OC_TINY=m -CONFIG_SPI_PXA2XX=m -CONFIG_SPI_PXA2XX_PCI=m -CONFIG_SPI_ROCKCHIP=m -CONFIG_SPI_SC18IS602=m -CONFIG_SPI_SIFIVE=m -CONFIG_SPI_MXIC=m -CONFIG_SPI_TOPCLIFF_PCH=m -CONFIG_SPI_XCOMM=m -# CONFIG_SPI_XILINX is not set -CONFIG_SPI_ZYNQMP_GQSPI=m - -# -# SPI Protocol Masters -# -CONFIG_SPI_SPIDEV=m -# CONFIG_SPI_LOOPBACK_TEST is not set -CONFIG_SPI_TLE62X0=m -# CONFIG_SPI_SLAVE is not set -CONFIG_SPMI=m -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# - -# -# HSI clients -# -CONFIG_HSI_CHAR=m -CONFIG_PPS=m -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -CONFIG_PPS_CLIENT_GPIO=m - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PTP_1588_CLOCK_PCH=m -CONFIG_PTP_1588_CLOCK_KVM=m -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_PINMUX=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AMD=y -CONFIG_PINCTRL_MCP23S08=m -CONFIG_PINCTRL_SX150X=y -CONFIG_PINCTRL_BAYTRAIL=y -CONFIG_PINCTRL_CHERRYVIEW=m -CONFIG_PINCTRL_MERRIFIELD=m -CONFIG_PINCTRL_INTEL=m -CONFIG_PINCTRL_BROXTON=m -CONFIG_PINCTRL_CANNONLAKE=m -CONFIG_PINCTRL_CEDARFORK=m -CONFIG_PINCTRL_DENVERTON=m -CONFIG_PINCTRL_GEMINILAKE=m -CONFIG_PINCTRL_ICELAKE=m -CONFIG_PINCTRL_LEWISBURG=m -CONFIG_PINCTRL_SUNRISEPOINT=m -CONFIG_PINCTRL_MADERA=m -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=m -CONFIG_GPIO_MAX730X=m - -# -# Memory mapped GPIO drivers -# -CONFIG_GPIO_AMDPT=m -CONFIG_GPIO_DWAPB=m -CONFIG_GPIO_EXAR=m -CONFIG_GPIO_GENERIC_PLATFORM=m -CONFIG_GPIO_ICH=m -CONFIG_GPIO_LYNXPOINT=y -CONFIG_GPIO_MB86S7X=m -CONFIG_GPIO_MENZ127=m -CONFIG_GPIO_VX855=m -CONFIG_GPIO_AMD_FCH=m -# end of Memory mapped GPIO drivers - -# -# Port-mapped I/O GPIO drivers -# -CONFIG_GPIO_F7188X=m -CONFIG_GPIO_IT87=m -CONFIG_GPIO_SCH=m -CONFIG_GPIO_SCH311X=m -CONFIG_GPIO_WINBOND=m -CONFIG_GPIO_WS16C48=m -# end of Port-mapped I/O GPIO drivers - -# -# I2C GPIO expanders -# -CONFIG_GPIO_ADP5588=m -CONFIG_GPIO_MAX7300=m -CONFIG_GPIO_MAX732X=m -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m -CONFIG_GPIO_TPIC2810=m -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_ADP5520=m -CONFIG_GPIO_ARIZONA=m -CONFIG_GPIO_BD9571MWV=m -CONFIG_GPIO_CRYSTAL_COVE=m -CONFIG_GPIO_CS5535=m -CONFIG_GPIO_DA9052=m -CONFIG_GPIO_DA9055=m -CONFIG_GPIO_DLN2=m -CONFIG_GPIO_JANZ_TTL=m -CONFIG_GPIO_KEMPLD=m -CONFIG_GPIO_LP3943=m -CONFIG_GPIO_LP873X=m -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_MSIC=y -CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_RC5T583=y -CONFIG_GPIO_TIMBERDALE=y -CONFIG_GPIO_TPS65086=m -CONFIG_GPIO_TPS6586X=y -CONFIG_GPIO_TPS65910=y -CONFIG_GPIO_TPS65912=m -CONFIG_GPIO_TQMX86=m -CONFIG_GPIO_TWL4030=m -CONFIG_GPIO_TWL6040=m -CONFIG_GPIO_UCB1400=m -CONFIG_GPIO_WHISKEY_COVE=m -CONFIG_GPIO_WM831X=m -CONFIG_GPIO_WM8350=m -CONFIG_GPIO_WM8994=m -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -CONFIG_GPIO_AMD8111=m -CONFIG_GPIO_INTEL_MID=y -CONFIG_GPIO_MERRIFIELD=m -CONFIG_GPIO_ML_IOH=m -CONFIG_GPIO_PCH=m -CONFIG_GPIO_PCI_IDIO_16=m -CONFIG_GPIO_PCIE_IDIO_24=m -CONFIG_GPIO_RDC321X=m -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -CONFIG_GPIO_MAX3191X=m -CONFIG_GPIO_MAX7301=m -CONFIG_GPIO_MC33880=m -CONFIG_GPIO_PISOSR=m -CONFIG_GPIO_XRA1403=m -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_MATROX=m -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m -CONFIG_W1_MASTER_GPIO=m -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2405=m -CONFIG_W1_SLAVE_DS2408=m -CONFIG_W1_SLAVE_DS2408_READBACK=y -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -CONFIG_W1_SLAVE_DS2438=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_RESTART=y -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=m -CONFIG_GENERIC_ADC_BATTERY=m -CONFIG_MAX8925_POWER=m -CONFIG_WM831X_BACKUP=m -CONFIG_WM831X_POWER=m -CONFIG_WM8350_POWER=m -CONFIG_TEST_POWER=m -CONFIG_BATTERY_88PM860X=m -CONFIG_CHARGER_ADP5061=m -CONFIG_BATTERY_DS2760=m -CONFIG_BATTERY_DS2780=m -CONFIG_BATTERY_DS2781=m -CONFIG_BATTERY_DS2782=m -CONFIG_BATTERY_SBS=m -CONFIG_CHARGER_SBS=m -CONFIG_MANAGER_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=m -CONFIG_BATTERY_BQ27XXX_HDQ=m -# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set -CONFIG_BATTERY_DA9030=m -CONFIG_BATTERY_DA9052=m -CONFIG_CHARGER_DA9150=m -CONFIG_BATTERY_DA9150=m -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_CHARGER=m -CONFIG_AXP288_FUEL_GAUGE=m -CONFIG_BATTERY_MAX17040=m -CONFIG_BATTERY_MAX17042=m -CONFIG_BATTERY_MAX1721X=m -CONFIG_BATTERY_TWL4030_MADC=m -CONFIG_CHARGER_88PM860X=m -CONFIG_CHARGER_PCF50633=m -CONFIG_BATTERY_RX51=m -CONFIG_CHARGER_ISP1704=m -CONFIG_CHARGER_MAX8903=m -CONFIG_CHARGER_TWL4030=m -CONFIG_CHARGER_LP8727=m -CONFIG_CHARGER_LP8788=m -CONFIG_CHARGER_GPIO=m -CONFIG_CHARGER_MANAGER=y -CONFIG_CHARGER_LT3651=m -CONFIG_CHARGER_MAX14577=m -CONFIG_CHARGER_MAX77693=m -CONFIG_CHARGER_MAX8997=m -CONFIG_CHARGER_MAX8998=m -CONFIG_CHARGER_BQ2415X=m -CONFIG_CHARGER_BQ24190=m -CONFIG_CHARGER_BQ24257=m -CONFIG_CHARGER_BQ24735=m -CONFIG_CHARGER_BQ25890=m -CONFIG_CHARGER_SMB347=m -CONFIG_CHARGER_TPS65090=m -CONFIG_BATTERY_GAUGE_LTC2941=m -CONFIG_BATTERY_RT5033=m -CONFIG_CHARGER_RT9455=m -CONFIG_CHARGER_CROS_USBPD=m -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -CONFIG_SENSORS_ABITUGURU=m -CONFIG_SENSORS_ABITUGURU3=m -CONFIG_SENSORS_AD7314=m -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_ADT7X10=m -CONFIG_SENSORS_ADT7310=m -CONFIG_SENSORS_ADT7410=m -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_K8TEMP=m -CONFIG_SENSORS_K10TEMP=m -CONFIG_SENSORS_FAM15H_POWER=m -CONFIG_SENSORS_APPLESMC=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ASPEED=m -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DS620=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_DELL_SMM=m -CONFIG_SENSORS_DA9052_ADC=m -CONFIG_SENSORS_DA9055=m -CONFIG_SENSORS_I5K_AMB=m -CONFIG_SENSORS_F71805F=m -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FSCHMD=m -CONFIG_SENSORS_FTSTEUTATES=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_HIH6130=m -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -CONFIG_SENSORS_IIO_HWMON=m -CONFIG_SENSORS_I5500=m -CONFIG_SENSORS_CORETEMP=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_JC42=m -CONFIG_SENSORS_POWR1220=m -CONFIG_SENSORS_LINEAGE=m -CONFIG_SENSORS_LTC2945=m -CONFIG_SENSORS_LTC2990=m -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -CONFIG_SENSORS_LTC4222=m -CONFIG_SENSORS_LTC4245=m -CONFIG_SENSORS_LTC4260=m -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_MAX1668=m -CONFIG_SENSORS_MAX197=m -CONFIG_SENSORS_MAX31722=m -CONFIG_SENSORS_MAX6621=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -CONFIG_SENSORS_MAX6697=m -CONFIG_SENSORS_MAX31790=m -CONFIG_SENSORS_MCP3021=m -CONFIG_SENSORS_TC654=m -CONFIG_SENSORS_MENF21BMC_HWMON=m -CONFIG_SENSORS_ADCXX=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_LM93=m -CONFIG_SENSORS_LM95234=m -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -CONFIG_SENSORS_NCT7802=m -CONFIG_SENSORS_NCT7904=m -CONFIG_SENSORS_NPCM7XX=m -CONFIG_SENSORS_PCF8591=m -CONFIG_PMBUS=m -CONFIG_SENSORS_PMBUS=m -CONFIG_SENSORS_ADM1275=m -CONFIG_SENSORS_IBM_CFFPS=m -CONFIG_SENSORS_IR35221=m -CONFIG_SENSORS_IR38064=m -CONFIG_SENSORS_ISL68137=m -CONFIG_SENSORS_LM25066=m -CONFIG_SENSORS_LTC2978=m -CONFIG_SENSORS_LTC2978_REGULATOR=y -CONFIG_SENSORS_LTC3815=m -CONFIG_SENSORS_MAX16064=m -CONFIG_SENSORS_MAX20751=m -CONFIG_SENSORS_MAX31785=m -CONFIG_SENSORS_MAX34440=m -CONFIG_SENSORS_MAX8688=m -CONFIG_SENSORS_TPS40422=m -CONFIG_SENSORS_TPS53679=m -CONFIG_SENSORS_UCD9000=m -CONFIG_SENSORS_UCD9200=m -CONFIG_SENSORS_ZL6100=m -CONFIG_SENSORS_SHT15=m -CONFIG_SENSORS_SHT21=m -CONFIG_SENSORS_SHT3x=m -CONFIG_SENSORS_SHTC1=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_SMSC47M192=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -CONFIG_SENSORS_SCH5636=m -CONFIG_SENSORS_STTS751=m -CONFIG_SENSORS_SMM665=m -CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS1015=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -CONFIG_SENSORS_INA209=m -CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_INA3221=m -CONFIG_SENSORS_TC74=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -CONFIG_SENSORS_TMP103=m -CONFIG_SENSORS_TMP108=m -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_VIA_CPUTEMP=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83773G=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83L786NG=m -CONFIG_SENSORS_W83627HF=m -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_WM831X=m -CONFIG_SENSORS_WM8350=m -CONFIG_SENSORS_XGENE=m - -# -# ACPI drivers -# -CONFIG_SENSORS_ACPI_POWER=m -CONFIG_SENSORS_ATK0110=m -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y -CONFIG_CLOCK_THERMAL=y -CONFIG_DEVFREQ_THERMAL=y -CONFIG_THERMAL_EMULATION=y - -# -# Intel thermal drivers -# -CONFIG_INTEL_POWERCLAMP=m -CONFIG_X86_PKG_TEMP_THERMAL=m -CONFIG_INTEL_SOC_DTS_IOSF_CORE=m -CONFIG_INTEL_SOC_DTS_THERMAL=m - -# -# ACPI INT340X thermal drivers -# -CONFIG_INT340X_THERMAL=m -CONFIG_ACPI_THERMAL_REL=m -CONFIG_INT3406_THERMAL=m -# end of ACPI INT340X thermal drivers - -CONFIG_INTEL_BXT_PMIC_THERMAL=m -CONFIG_INTEL_PCH_THERMAL=m -# end of Intel thermal drivers - -CONFIG_GENERIC_ADC_THERMAL=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_DA9052_WATCHDOG=m -CONFIG_DA9055_WATCHDOG=m -CONFIG_DA9063_WATCHDOG=m -CONFIG_DA9062_WATCHDOG=m -CONFIG_MENF21BMC_WATCHDOG=m -CONFIG_MENZ069_WATCHDOG=m -CONFIG_WDAT_WDT=m -CONFIG_WM831X_WATCHDOG=m -CONFIG_WM8350_WATCHDOG=m -CONFIG_XILINX_WATCHDOG=m -CONFIG_ZIIRAVE_WATCHDOG=m -CONFIG_RAVE_SP_WATCHDOG=m -CONFIG_CADENCE_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_TWL4030_WATCHDOG=m -CONFIG_MAX63XX_WATCHDOG=m -CONFIG_RETU_WATCHDOG=m -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM1535_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_EBC_C384_WDT=m -CONFIG_F71808E_WDT=m -CONFIG_SP5100_TCO=m -CONFIG_SBC_FITPC2_WATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_IBMASR=m -CONFIG_WAFER_WDT=m -CONFIG_I6300ESB_WDT=m -CONFIG_IE6XX_WDT=m -CONFIG_INTEL_SCU_WATCHDOG=y -CONFIG_INTEL_MID_WATCHDOG=m -CONFIG_ITCO_WDT=m -CONFIG_ITCO_VENDOR_SUPPORT=y -CONFIG_IT8712F_WDT=m -CONFIG_IT87_WDT=m -CONFIG_HP_WATCHDOG=m -CONFIG_HPWDT_NMI_DECODING=y -CONFIG_KEMPLD_WDT=m -CONFIG_SC1200_WDT=m -CONFIG_SCx200_WDT=m -CONFIG_PC87413_WDT=m -CONFIG_NV_TCO=m -CONFIG_60XX_WDT=m -CONFIG_SBC8360_WDT=m -CONFIG_SBC7240_WDT=m -CONFIG_CPU5_WDT=m -CONFIG_SMSC_SCH311X_WDT=m -CONFIG_SMSC37B787_WDT=m -CONFIG_TQMX86_WDT=m -CONFIG_VIA_WDT=m -CONFIG_W83627HF_WDT=m -CONFIG_W83877F_WDT=m -CONFIG_W83977F_WDT=m -CONFIG_MACHZ_WDT=m -CONFIG_SBC_EPX_C3_WATCHDOG=m -CONFIG_NI903X_WDT=m -CONFIG_NIC7018_WDT=m -CONFIG_MEN_A21_WDT=m -CONFIG_XEN_WDT=m - -# -# ISA-based Watchdog Cards -# -CONFIG_PCWATCHDOG=m -CONFIG_MIXCOMWD=m -CONFIG_WDT=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -# CONFIG_SSB_PCMCIAHOST is not set -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_GPIO=y -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_SFLASH=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -CONFIG_MFD_CS5535=m -CONFIG_MFD_AS3711=y -CONFIG_PMIC_ADP5520=y -CONFIG_MFD_AAT2870_CORE=y -CONFIG_MFD_BCM590XX=m -CONFIG_MFD_BD9571MWV=m -CONFIG_MFD_AXP20X=m -CONFIG_MFD_AXP20X_I2C=m -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_CHARDEV=m -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -CONFIG_PMIC_DA903X=y -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9052_I2C=y -CONFIG_MFD_DA9055=y -CONFIG_MFD_DA9062=m -CONFIG_MFD_DA9063=y -CONFIG_MFD_DA9150=m -CONFIG_MFD_DLN2=m -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_SPI=m -CONFIG_MFD_MC13XXX_I2C=m -CONFIG_HTC_PASIC3=m -CONFIG_HTC_I2CPLD=y -CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m -CONFIG_LPC_ICH=m -CONFIG_LPC_SCH=m -CONFIG_INTEL_SOC_PMIC=y -CONFIG_INTEL_SOC_PMIC_BXTWC=m -CONFIG_INTEL_SOC_PMIC_CHTWC=y -CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m -CONFIG_MFD_INTEL_LPSS=m -CONFIG_MFD_INTEL_LPSS_ACPI=m -CONFIG_MFD_INTEL_LPSS_PCI=m -CONFIG_MFD_INTEL_MSIC=y -CONFIG_MFD_JANZ_CMODIO=m -CONFIG_MFD_KEMPLD=m -CONFIG_MFD_88PM800=m -CONFIG_MFD_88PM805=m -CONFIG_MFD_88PM860X=y -CONFIG_MFD_MAX14577=y -CONFIG_MFD_MAX77693=y -CONFIG_MFD_MAX77843=y -CONFIG_MFD_MAX8907=m -CONFIG_MFD_MAX8925=y -CONFIG_MFD_MAX8997=y -CONFIG_MFD_MAX8998=y -CONFIG_MFD_MT6397=m -CONFIG_MFD_MENF21BMC=m -CONFIG_EZX_PCAP=y -CONFIG_MFD_VIPERBOARD=m -CONFIG_MFD_RETU=m -CONFIG_MFD_PCF50633=m -CONFIG_PCF50633_ADC=m -CONFIG_PCF50633_GPIO=m -CONFIG_UCB1400_CORE=m -CONFIG_MFD_RDC321X=m -CONFIG_MFD_RT5033=m -CONFIG_MFD_RC5T583=y -CONFIG_MFD_SEC_CORE=y -CONFIG_MFD_SI476X_CORE=m -CONFIG_MFD_SM501=m -CONFIG_MFD_SM501_GPIO=y -CONFIG_MFD_SKY81452=m -CONFIG_MFD_SMSC=y -CONFIG_ABX500_CORE=y -CONFIG_AB3100_CORE=y -CONFIG_AB3100_OTP=m -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -CONFIG_MFD_LP3943=m -CONFIG_MFD_LP8788=y -CONFIG_MFD_TI_LMU=m -CONFIG_MFD_PALMAS=y -CONFIG_TPS6105X=m -CONFIG_TPS65010=m -CONFIG_TPS6507X=m -CONFIG_MFD_TPS65086=m -CONFIG_MFD_TPS65090=y -# CONFIG_MFD_TPS68470 is not set -CONFIG_MFD_TI_LP873X=m -CONFIG_MFD_TPS6586X=y -CONFIG_MFD_TPS65910=y -CONFIG_MFD_TPS65912=y -CONFIG_MFD_TPS65912_I2C=y -CONFIG_MFD_TPS65912_SPI=y -CONFIG_MFD_TPS80031=y -CONFIG_TWL4030_CORE=y -CONFIG_MFD_TWL4030_AUDIO=y -CONFIG_TWL6040_CORE=y -CONFIG_MFD_WL1273_CORE=m -CONFIG_MFD_LM3533=m -CONFIG_MFD_TIMBERDALE=m -CONFIG_MFD_TQMX86=m -CONFIG_MFD_VX855=m -CONFIG_MFD_ARIZONA=y -CONFIG_MFD_ARIZONA_I2C=m -CONFIG_MFD_ARIZONA_SPI=m -CONFIG_MFD_CS47L24=y -CONFIG_MFD_WM5102=y -CONFIG_MFD_WM5110=y -CONFIG_MFD_WM8997=y -CONFIG_MFD_WM8998=y -CONFIG_MFD_WM8400=y -CONFIG_MFD_WM831X=y -CONFIG_MFD_WM831X_I2C=y -CONFIG_MFD_WM831X_SPI=y -CONFIG_MFD_WM8350=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_MFD_WM8994=m -CONFIG_RAVE_SP_CORE=m -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -CONFIG_REGULATOR_VIRTUAL_CONSUMER=m -CONFIG_REGULATOR_USERSPACE_CONSUMER=m -CONFIG_REGULATOR_88PG86X=m -CONFIG_REGULATOR_88PM800=m -CONFIG_REGULATOR_88PM8607=m -CONFIG_REGULATOR_ACT8865=m -CONFIG_REGULATOR_AD5398=m -CONFIG_REGULATOR_ANATOP=m -CONFIG_REGULATOR_AAT2870=m -CONFIG_REGULATOR_AB3100=m -CONFIG_REGULATOR_ARIZONA_LDO1=m -CONFIG_REGULATOR_ARIZONA_MICSUPP=m -CONFIG_REGULATOR_AS3711=m -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BCM590XX=m -CONFIG_REGULATOR_BD9571MWV=m -CONFIG_REGULATOR_DA903X=m -CONFIG_REGULATOR_DA9052=m -CONFIG_REGULATOR_DA9055=m -CONFIG_REGULATOR_DA9062=m -CONFIG_REGULATOR_DA9063=m -CONFIG_REGULATOR_DA9210=m -CONFIG_REGULATOR_DA9211=m -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_ISL9305=m -CONFIG_REGULATOR_ISL6271A=m -CONFIG_REGULATOR_LM363X=m -CONFIG_REGULATOR_LP3971=m -CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=m -CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LP8788=m -CONFIG_REGULATOR_LTC3589=m -CONFIG_REGULATOR_LTC3676=m -CONFIG_REGULATOR_MAX14577=m -CONFIG_REGULATOR_MAX1586=m -CONFIG_REGULATOR_MAX8649=m -CONFIG_REGULATOR_MAX8660=m -CONFIG_REGULATOR_MAX8907=m -CONFIG_REGULATOR_MAX8925=m -CONFIG_REGULATOR_MAX8952=m -CONFIG_REGULATOR_MAX8997=m -CONFIG_REGULATOR_MAX8998=m -CONFIG_REGULATOR_MAX77693=m -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -CONFIG_REGULATOR_MT6311=m -CONFIG_REGULATOR_MT6323=m -CONFIG_REGULATOR_MT6397=m -CONFIG_REGULATOR_PALMAS=m -CONFIG_REGULATOR_PCAP=m -CONFIG_REGULATOR_PCF50633=m -CONFIG_REGULATOR_PFUZE100=m -CONFIG_REGULATOR_PV88060=m -CONFIG_REGULATOR_PV88080=m -CONFIG_REGULATOR_PV88090=m -CONFIG_REGULATOR_PWM=m -CONFIG_REGULATOR_QCOM_SPMI=m -CONFIG_REGULATOR_RC5T583=m -CONFIG_REGULATOR_RT5033=m -CONFIG_REGULATOR_S2MPA01=m -CONFIG_REGULATOR_S2MPS11=m -CONFIG_REGULATOR_S5M8767=m -CONFIG_REGULATOR_SKY81452=m -CONFIG_REGULATOR_TPS51632=m -CONFIG_REGULATOR_TPS6105X=m -CONFIG_REGULATOR_TPS62360=m -CONFIG_REGULATOR_TPS65023=m -CONFIG_REGULATOR_TPS6507X=m -CONFIG_REGULATOR_TPS65086=m -CONFIG_REGULATOR_TPS65090=m -CONFIG_REGULATOR_TPS65132=m -CONFIG_REGULATOR_TPS6524X=m -CONFIG_REGULATOR_TPS6586X=m -CONFIG_REGULATOR_TPS65910=m -CONFIG_REGULATOR_TPS65912=m -CONFIG_REGULATOR_TPS80031=m -CONFIG_REGULATOR_TWL4030=m -CONFIG_REGULATOR_WM831X=m -CONFIG_REGULATOR_WM8350=m -CONFIG_REGULATOR_WM8400=m -CONFIG_REGULATOR_WM8994=m -CONFIG_CEC_CORE=m -CONFIG_CEC_NOTIFIER=y -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_LIRC=y -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_ITE_CIR=m -CONFIG_IR_FINTEK=m -CONFIG_IR_NUVOTON=m -CONFIG_IR_REDRAT3=m -CONFIG_IR_STREAMZAP=m -CONFIG_IR_WINBOND_CIR=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -CONFIG_IR_SERIAL=m -CONFIG_IR_SERIAL_TRANSMITTER=y -CONFIG_IR_SIR=m -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -# CONFIG_MEDIA_CONTROLLER_REQUEST_API is not set -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=m -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FLASH_LED_CLASS=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=m -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -CONFIG_DVB_USB_ZD1301=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_MEYE=m -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -CONFIG_VIDEO_CX25821=m -CONFIG_VIDEO_CX25821_ALSA=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -CONFIG_VIDEO_SAA7134_GO7007=m -CONFIG_VIDEO_SAA7164=m -CONFIG_VIDEO_COBALT=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_VIDEO_IPU3_CIO2=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_VIA_CAMERA=m -CONFIG_VIDEO_CADENCE=y -CONFIG_VIDEO_CADENCE_CSI2RX=m -CONFIG_VIDEO_CADENCE_CSI2TX=m -CONFIG_VIDEO_ASPEED=m -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m -CONFIG_VIDEO_SH_VEU=m -CONFIG_V4L_TEST_DRIVERS=y -# CONFIG_VIDEO_VIMC is not set -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -CONFIG_VIDEO_VIM2M=m -CONFIG_VIDEO_VICODEC=m -CONFIG_DVB_PLATFORM_DRIVERS=y -CONFIG_CEC_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CROS_EC_CEC=m -CONFIG_VIDEO_SECO_CEC=m -# CONFIG_VIDEO_SECO_RC is not set -CONFIG_SDR_PLATFORM_DRIVERS=y - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=m -CONFIG_USB_SI470X=m -CONFIG_I2C_SI470X=m -CONFIG_RADIO_SI4713=m -CONFIG_USB_SI4713=m -CONFIG_PLATFORM_SI4713=m -CONFIG_I2C_SI4713=m -CONFIG_RADIO_SI476X=m -CONFIG_USB_MR800=m -CONFIG_USB_DSBR=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -CONFIG_RADIO_TEA5764=m -CONFIG_RADIO_SAA7706H=m -CONFIG_RADIO_TEF6862=m -CONFIG_RADIO_TIMBERDALE=m -CONFIG_RADIO_WL1273=m - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m -# end of Texas Instruments WL128x FM driver (ST based) - -CONFIG_V4L_RADIO_ISA_DRIVERS=y -CONFIG_RADIO_ISA=m -CONFIG_RADIO_CADET=m -CONFIG_RADIO_RTRACK=m -CONFIG_RADIO_RTRACK2=m -CONFIG_RADIO_AZTECH=m -CONFIG_RADIO_GEMTEK=m -CONFIG_RADIO_MIROPCM20=m -CONFIG_RADIO_SF16FMI=m -CONFIG_RADIO_SF16FMR2=m -CONFIG_RADIO_TERRATEC=m -CONFIG_RADIO_TRUST=m -CONFIG_RADIO_TYPHOON=m -CONFIG_RADIO_ZOLTRIX=m - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -CONFIG_SMS_SIANO_DEBUGFS=y -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_ADV7604=m -CONFIG_VIDEO_ADV7842=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_ADV7511=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_MT9V011=m - -# -# Lens drivers -# - -# -# Flash devices -# - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_M52790=m - -# -# Media SPI Adapters -# -CONFIG_CXD2880_SPI_DRV=m -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m - -# -# Graphics support -# -CONFIG_AGP=y -CONFIG_AGP_ALI=m -CONFIG_AGP_ATI=m -CONFIG_AGP_AMD=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -CONFIG_AGP_NVIDIA=y -CONFIG_AGP_SIS=m -CONFIG_AGP_SWORKS=m -CONFIG_AGP_VIA=y -CONFIG_AGP_EFFICEON=m -CONFIG_INTEL_GTT=y -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_VGA_SWITCHEROO=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DSI=y -# CONFIG_DRM_DP_AUX_CHARDEV is not set -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -CONFIG_DRM_I2C_CH7006=m -CONFIG_DRM_I2C_SIL164=m -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_I2C_NXP_TDA9950=m -# end of I2C encoder or helper chips - -# -# ARM devices -# -# end of ARM devices - -CONFIG_DRM_RADEON=m -# CONFIG_DRM_RADEON_USERPTR is not set -CONFIG_DRM_AMDGPU=m -# CONFIG_DRM_AMDGPU_SI is not set -# CONFIG_DRM_AMDGPU_CIK is not set -CONFIG_DRM_AMDGPU_USERPTR=y -# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# CONFIG_DRM_AMD_ACP is not set -# end of ACP (Audio CoProcessor) Configuration - -# -# Display Engine Configuration -# -CONFIG_DRM_AMD_DC=y -CONFIG_DRM_AMD_DC_DCN1_0=y -CONFIG_DRM_AMD_DC_DCN1_01=y -# CONFIG_DEBUG_KERNEL_DC is not set -# end of Display Engine Configuration - -CONFIG_DRM_NOUVEAU=m -# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -# CONFIG_NOUVEAU_DEBUG_MMU is not set -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_I915=m -# CONFIG_DRM_I915_ALPHA_SUPPORT is not set -CONFIG_DRM_I915_CAPTURE_ERROR=y -CONFIG_DRM_I915_COMPRESS_ERROR=y -CONFIG_DRM_I915_USERPTR=y - -# -# drm/i915 Debugging -# -# CONFIG_DRM_I915_WERROR is not set -# CONFIG_DRM_I915_DEBUG is not set -# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set -# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set -# CONFIG_DRM_I915_DEBUG_GUC is not set -# CONFIG_DRM_I915_SELFTEST is not set -# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set -# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set -# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set -# end of drm/i915 Debugging - -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_VMWGFX=m -CONFIG_DRM_VMWGFX_FBCON=y -CONFIG_DRM_GMA500=m -CONFIG_DRM_GMA600=y -CONFIG_DRM_GMA3600=y -CONFIG_DRM_MEDFIELD=y -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -CONFIG_DRM_ANALOGIX_ANX78XX=m -# end of Display Interface Bridges - -# CONFIG_DRM_ETNAVIV is not set -CONFIG_DRM_HISI_HIBMC=m -# CONFIG_DRM_TINYDRM is not set -CONFIG_DRM_XEN=y -CONFIG_DRM_XEN_FRONTEND=m -CONFIG_DRM_VBOXVIDEO=m -# CONFIG_DRM_LEGACY is not set -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_BOOT_VESA_SUPPORT=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=m -CONFIG_FB_SYS_COPYAREA=m -CONFIG_FB_SYS_IMAGEBLIT=m -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=m -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_HECUBA=m -CONFIG_FB_SVGALIB=m -CONFIG_FB_BACKLIGHT=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -CONFIG_FB_CIRRUS=m -CONFIG_FB_PM2=m -CONFIG_FB_PM2_FIFO_DISCONNECT=y -CONFIG_FB_CYBER2000=m -CONFIG_FB_CYBER2000_DDC=y -CONFIG_FB_ARC=m -CONFIG_FB_ASILIANT=y -CONFIG_FB_IMSTT=y -CONFIG_FB_VGA16=m -CONFIG_FB_UVESA=m -CONFIG_FB_VESA=y -CONFIG_FB_EFI=y -CONFIG_FB_N411=m -CONFIG_FB_HGA=m -CONFIG_FB_OPENCORES=m -CONFIG_FB_S1D13XXX=m -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=m -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -CONFIG_FB_I740=m -CONFIG_FB_I810=m -# CONFIG_FB_I810_GTF is not set -CONFIG_FB_LE80578=m -CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y -CONFIG_FB_MATROX=m -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -CONFIG_FB_MATROX_I2C=m -CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_RADEON=m -CONFIG_FB_RADEON_I2C=y -CONFIG_FB_RADEON_BACKLIGHT=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=m -CONFIG_FB_ATY128_BACKLIGHT=y -CONFIG_FB_ATY=m -CONFIG_FB_ATY_CT=y -# CONFIG_FB_ATY_GENERIC_LCD is not set -CONFIG_FB_ATY_GX=y -CONFIG_FB_ATY_BACKLIGHT=y -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -CONFIG_FB_SAVAGE=m -CONFIG_FB_SAVAGE_I2C=y -# CONFIG_FB_SAVAGE_ACCEL is not set -CONFIG_FB_SIS=m -CONFIG_FB_SIS_300=y -CONFIG_FB_SIS_315=y -CONFIG_FB_VIA=m -# CONFIG_FB_VIA_DIRECT_PROCFS is not set -CONFIG_FB_VIA_X_COMPATIBILITY=y -CONFIG_FB_NEOMAGIC=m -CONFIG_FB_KYRO=m -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -# CONFIG_FB_3DFX_I2C is not set -CONFIG_FB_VOODOO1=m -CONFIG_FB_VT8623=m -CONFIG_FB_TRIDENT=m -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -CONFIG_FB_CARMINE=m -CONFIG_FB_CARMINE_DRAM_EVAL=y -# CONFIG_CARMINE_DRAM_CUSTOM is not set -CONFIG_FB_GEODE=y -CONFIG_FB_GEODE_LX=m -CONFIG_FB_GEODE_GX=m -CONFIG_FB_GEODE_GX1=m -CONFIG_FB_SM501=m -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -CONFIG_FB_IBM_GXT4500=m -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=m -CONFIG_FB_METRONOME=m -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_HYPERV=m -CONFIG_FB_SIMPLE=y -CONFIG_FB_SM712=m -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_L4F00242T03=m -CONFIG_LCD_LMS283GF05=m -CONFIG_LCD_LTV350QV=m -CONFIG_LCD_ILI922X=m -CONFIG_LCD_ILI9320=m -CONFIG_LCD_TDO24M=m -CONFIG_LCD_VGG2432A4=m -CONFIG_LCD_PLATFORM=m -CONFIG_LCD_AMS369FG06=m -CONFIG_LCD_LMS501KF03=m -CONFIG_LCD_HX8357=m -CONFIG_LCD_OTM3225A=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_LM3533=m -CONFIG_BACKLIGHT_CARILLO_RANCH=m -CONFIG_BACKLIGHT_PWM=m -CONFIG_BACKLIGHT_DA903X=m -CONFIG_BACKLIGHT_DA9052=m -CONFIG_BACKLIGHT_MAX8925=m -CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_PM8941_WLED=m -CONFIG_BACKLIGHT_SAHARA=m -CONFIG_BACKLIGHT_WM831X=m -CONFIG_BACKLIGHT_ADP5520=m -CONFIG_BACKLIGHT_ADP8860=m -CONFIG_BACKLIGHT_ADP8870=m -CONFIG_BACKLIGHT_88PM860X=m -CONFIG_BACKLIGHT_PCF50633=m -CONFIG_BACKLIGHT_AAT2870=m -CONFIG_BACKLIGHT_LM3630A=m -CONFIG_BACKLIGHT_LM3639=m -CONFIG_BACKLIGHT_LP855X=m -CONFIG_BACKLIGHT_LP8788=m -CONFIG_BACKLIGHT_PANDORA=m -CONFIG_BACKLIGHT_SKY81452=m -CONFIG_BACKLIGHT_AS3711=m -CONFIG_BACKLIGHT_GPIO=m -CONFIG_BACKLIGHT_LV5207LP=m -CONFIG_BACKLIGHT_BD6107=m -CONFIG_BACKLIGHT_ARCXCNN=m -CONFIG_BACKLIGHT_RAVE_SP=m -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_MDA_CONSOLE=m -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_COMPRESS_OFFLOAD=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_DMA_SGBUF=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_SEQ_VIRMIDI=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL4_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_OPL4_LIB_SEQ=m -CONFIG_SND_VX_LIB=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -CONFIG_SND_PCSP=m -CONFIG_SND_DUMMY=m -CONFIG_SND_ALOOP=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_MTS64=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_WSS_LIB=m -CONFIG_SND_SB_COMMON=m -CONFIG_SND_SB8_DSP=m -CONFIG_SND_SB16_DSP=m -CONFIG_SND_ISA=y -CONFIG_SND_ADLIB=m -CONFIG_SND_AD1816A=m -CONFIG_SND_AD1848=m -CONFIG_SND_ALS100=m -CONFIG_SND_AZT1605=m -CONFIG_SND_AZT2316=m -CONFIG_SND_AZT2320=m -CONFIG_SND_CMI8328=m -CONFIG_SND_CMI8330=m -CONFIG_SND_CS4231=m -CONFIG_SND_CS4236=m -CONFIG_SND_ES1688=m -CONFIG_SND_ES18XX=m -CONFIG_SND_SC6000=m -CONFIG_SND_GUSCLASSIC=m -CONFIG_SND_GUSEXTREME=m -CONFIG_SND_GUSMAX=m -CONFIG_SND_INTERWAVE=m -CONFIG_SND_INTERWAVE_STB=m -CONFIG_SND_JAZZ16=m -CONFIG_SND_OPL3SA2=m -CONFIG_SND_OPTI92X_AD1848=m -CONFIG_SND_OPTI92X_CS4231=m -CONFIG_SND_OPTI93X=m -CONFIG_SND_MIRO=m -CONFIG_SND_SB8=m -CONFIG_SND_SB16=m -CONFIG_SND_SBAWE=m -CONFIG_SND_SBAWE_SEQ=m -CONFIG_SND_SB16_CSP=y -CONFIG_SND_SSCAPE=m -CONFIG_SND_WAVEFRONT=m -CONFIG_SND_MSND_PINNACLE=m -CONFIG_SND_MSND_CLASSIC=m -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS300=m -CONFIG_SND_ALS4000=m -CONFIG_SND_ALI5451=m -CONFIG_SND_ASIHPI=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AW2=m -CONFIG_SND_AZT3328=m -CONFIG_SND_BT87X=m -# CONFIG_SND_BT87X_OVERCLOCK is not set -CONFIG_SND_CA0106=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -CONFIG_SND_CS4281=m -CONFIG_SND_CS46XX=m -CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS5530=m -CONFIG_SND_CS5535AUDIO=m -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1_SEQ=m -CONFIG_SND_EMU10K1X=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_ES1968_INPUT=y -CONFIG_SND_ES1968_RADIO=y -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X_BOOL=y -CONFIG_SND_HDSP=m -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1712=m -CONFIG_SND_ICE1724=m -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_KORG1212=m -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_MAESTRO3_INPUT=y -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -CONFIG_SND_RME32=m -CONFIG_SND_RME96=m -CONFIG_SND_RME9652=m -CONFIG_SND_SIS7019=m -CONFIG_SND_SONICVIBES=m -CONFIG_SND_TRIDENT=m -CONFIG_SND_VIA82XX=m -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VIRTUOSO=m -CONFIG_SND_VX222=m -CONFIG_SND_YMFPCI=m - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=0 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_COMPONENT=y -CONFIG_SND_HDA_I915=y -CONFIG_SND_HDA_EXT_CORE=m -CONFIG_SND_HDA_PREALLOC_SIZE=64 -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_USX2Y=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_US122L=m -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -CONFIG_SND_FIREWIRE_MOTU=m -CONFIG_SND_FIREFACE=m -CONFIG_SND_PCMCIA=y -CONFIG_SND_VXPOCKET=m -CONFIG_SND_PDAUDIOCF=m -CONFIG_SND_SOC=m -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_COMPRESS=y -CONFIG_SND_SOC_TOPOLOGY=y -CONFIG_SND_SOC_ACPI=m -CONFIG_SND_SOC_AMD_ACP=m -CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m -CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m -CONFIG_SND_SOC_AMD_ACP3x=m -CONFIG_SND_ATMEL_SOC=m -CONFIG_SND_DESIGNWARE_I2S=m -# CONFIG_SND_DESIGNWARE_PCM is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -CONFIG_SND_SOC_FSL_ASRC=m -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -CONFIG_SND_SOC_FSL_ESAI=m -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_IMX_AUDMUX=m -# end of SoC Audio for Freescale CPUs - -CONFIG_SND_I2S_HI6210_I2S=m -# CONFIG_SND_SOC_IMG is not set -CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y -CONFIG_SND_SST_IPC=m -CONFIG_SND_SST_IPC_PCI=m -CONFIG_SND_SST_IPC_ACPI=m -CONFIG_SND_SOC_INTEL_SST_ACPI=m -CONFIG_SND_SOC_INTEL_SST=m -CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m -CONFIG_SND_SOC_INTEL_HASWELL=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m -CONFIG_SND_SOC_INTEL_SKYLAKE=m -CONFIG_SND_SOC_INTEL_SKL=m -CONFIG_SND_SOC_INTEL_APL=m -CONFIG_SND_SOC_INTEL_KBL=m -CONFIG_SND_SOC_INTEL_GLK=m -CONFIG_SND_SOC_INTEL_CNL=m -CONFIG_SND_SOC_INTEL_CFL=m -CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m -CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m -CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y -CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m -CONFIG_SND_SOC_ACPI_INTEL_MATCH=m -CONFIG_SND_SOC_INTEL_MACH=y -CONFIG_SND_SOC_INTEL_HASWELL_MACH=m -CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m -CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m -CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m -CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m -CONFIG_SND_SOC_MTK_BTCVSD=m -CONFIG_SND_SOC_SOF_TOPLEVEL=y -CONFIG_SND_SOC_SOF_PCI=m -CONFIG_SND_SOC_SOF_ACPI=m -CONFIG_SND_SOC_SOF_OPTIONS=m -# CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT is not set -# CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS is not set -# CONFIG_SND_SOC_SOF_DEBUG is not set -CONFIG_SND_SOC_SOF=m -# CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL is not set - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -CONFIG_SND_SOC_XILINX_I2S=m -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -CONFIG_SND_SOC_XTFPGA_I2S=m -CONFIG_ZX_TDM=m -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -CONFIG_SND_SOC_AC97_CODEC=m -CONFIG_SND_SOC_ADAU_UTILS=m -CONFIG_SND_SOC_ADAU1701=m -CONFIG_SND_SOC_ADAU17X1=m -CONFIG_SND_SOC_ADAU1761=m -CONFIG_SND_SOC_ADAU1761_I2C=m -CONFIG_SND_SOC_ADAU1761_SPI=m -CONFIG_SND_SOC_ADAU7002=m -CONFIG_SND_SOC_AK4104=m -CONFIG_SND_SOC_AK4118=m -CONFIG_SND_SOC_AK4458=m -CONFIG_SND_SOC_AK4554=m -CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_AK4642=m -CONFIG_SND_SOC_AK5386=m -CONFIG_SND_SOC_AK5558=m -CONFIG_SND_SOC_ALC5623=m -CONFIG_SND_SOC_BD28623=m -CONFIG_SND_SOC_BT_SCO=m -CONFIG_SND_SOC_CROS_EC_CODEC=m -CONFIG_SND_SOC_CS35L32=m -CONFIG_SND_SOC_CS35L33=m -CONFIG_SND_SOC_CS35L34=m -CONFIG_SND_SOC_CS35L35=m -CONFIG_SND_SOC_CS35L36=m -CONFIG_SND_SOC_CS42L42=m -CONFIG_SND_SOC_CS42L51=m -CONFIG_SND_SOC_CS42L51_I2C=m -CONFIG_SND_SOC_CS42L52=m -CONFIG_SND_SOC_CS42L56=m -CONFIG_SND_SOC_CS42L73=m -CONFIG_SND_SOC_CS4265=m -CONFIG_SND_SOC_CS4270=m -CONFIG_SND_SOC_CS4271=m -CONFIG_SND_SOC_CS4271_I2C=m -CONFIG_SND_SOC_CS4271_SPI=m -CONFIG_SND_SOC_CS42XX8=m -CONFIG_SND_SOC_CS42XX8_I2C=m -CONFIG_SND_SOC_CS43130=m -CONFIG_SND_SOC_CS4341=m -CONFIG_SND_SOC_CS4349=m -CONFIG_SND_SOC_CS53L30=m -CONFIG_SND_SOC_DA7213=m -CONFIG_SND_SOC_DA7219=m -CONFIG_SND_SOC_DMIC=m -CONFIG_SND_SOC_HDMI_CODEC=m -CONFIG_SND_SOC_ES7134=m -CONFIG_SND_SOC_ES7241=m -CONFIG_SND_SOC_ES8316=m -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -CONFIG_SND_SOC_GTM601=m -CONFIG_SND_SOC_HDAC_HDMI=m -CONFIG_SND_SOC_HDAC_HDA=m -CONFIG_SND_SOC_INNO_RK3036=m -CONFIG_SND_SOC_MAX98088=m -CONFIG_SND_SOC_MAX98090=m -CONFIG_SND_SOC_MAX98357A=m -CONFIG_SND_SOC_MAX98504=m -CONFIG_SND_SOC_MAX9867=m -CONFIG_SND_SOC_MAX98927=m -CONFIG_SND_SOC_MAX98373=m -CONFIG_SND_SOC_MAX9860=m -CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m -CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m -CONFIG_SND_SOC_PCM1681=m -CONFIG_SND_SOC_PCM1789=m -CONFIG_SND_SOC_PCM1789_I2C=m -CONFIG_SND_SOC_PCM179X=m -CONFIG_SND_SOC_PCM179X_I2C=m -CONFIG_SND_SOC_PCM179X_SPI=m -CONFIG_SND_SOC_PCM186X=m -CONFIG_SND_SOC_PCM186X_I2C=m -CONFIG_SND_SOC_PCM186X_SPI=m -CONFIG_SND_SOC_PCM3060=m -CONFIG_SND_SOC_PCM3060_I2C=m -CONFIG_SND_SOC_PCM3060_SPI=m -CONFIG_SND_SOC_PCM3168A=m -CONFIG_SND_SOC_PCM3168A_I2C=m -CONFIG_SND_SOC_PCM3168A_SPI=m -CONFIG_SND_SOC_PCM512x=m -CONFIG_SND_SOC_PCM512x_I2C=m -CONFIG_SND_SOC_PCM512x_SPI=m -# CONFIG_SND_SOC_RK3328 is not set -CONFIG_SND_SOC_RL6231=m -CONFIG_SND_SOC_RL6347A=m -CONFIG_SND_SOC_RT286=m -CONFIG_SND_SOC_RT298=m -CONFIG_SND_SOC_RT5514=m -CONFIG_SND_SOC_RT5514_SPI=m -CONFIG_SND_SOC_RT5616=m -CONFIG_SND_SOC_RT5631=m -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SOC_RT5651=m -CONFIG_SND_SOC_RT5660=m -CONFIG_SND_SOC_RT5663=m -CONFIG_SND_SOC_RT5670=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_RT5682=m -CONFIG_SND_SOC_SGTL5000=m -CONFIG_SND_SOC_SI476X=m -CONFIG_SND_SOC_SIGMADSP=m -CONFIG_SND_SOC_SIGMADSP_I2C=m -CONFIG_SND_SOC_SIGMADSP_REGMAP=m -CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m -CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m -CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_SSM2305=m -CONFIG_SND_SOC_SSM2602=m -CONFIG_SND_SOC_SSM2602_SPI=m -CONFIG_SND_SOC_SSM2602_I2C=m -CONFIG_SND_SOC_SSM4567=m -CONFIG_SND_SOC_STA32X=m -CONFIG_SND_SOC_STA350=m -CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SOC_TAS2552=m -CONFIG_SND_SOC_TAS5086=m -CONFIG_SND_SOC_TAS571X=m -CONFIG_SND_SOC_TAS5720=m -CONFIG_SND_SOC_TAS6424=m -CONFIG_SND_SOC_TDA7419=m -CONFIG_SND_SOC_TFA9879=m -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -CONFIG_SND_SOC_TLV320AIC23_SPI=m -CONFIG_SND_SOC_TLV320AIC31XX=m -CONFIG_SND_SOC_TLV320AIC32X4=m -CONFIG_SND_SOC_TLV320AIC32X4_I2C=m -CONFIG_SND_SOC_TLV320AIC32X4_SPI=m -CONFIG_SND_SOC_TLV320AIC3X=m -CONFIG_SND_SOC_TS3A227E=m -CONFIG_SND_SOC_TSCS42XX=m -CONFIG_SND_SOC_TSCS454=m -CONFIG_SND_SOC_WM8510=m -CONFIG_SND_SOC_WM8523=m -CONFIG_SND_SOC_WM8524=m -CONFIG_SND_SOC_WM8580=m -CONFIG_SND_SOC_WM8711=m -CONFIG_SND_SOC_WM8728=m -CONFIG_SND_SOC_WM8731=m -CONFIG_SND_SOC_WM8737=m -CONFIG_SND_SOC_WM8741=m -CONFIG_SND_SOC_WM8750=m -CONFIG_SND_SOC_WM8753=m -CONFIG_SND_SOC_WM8770=m -CONFIG_SND_SOC_WM8776=m -CONFIG_SND_SOC_WM8782=m -CONFIG_SND_SOC_WM8804=m -CONFIG_SND_SOC_WM8804_I2C=m -CONFIG_SND_SOC_WM8804_SPI=m -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -CONFIG_SND_SOC_WM8960=m -CONFIG_SND_SOC_WM8962=m -CONFIG_SND_SOC_WM8974=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_WM8985=m -CONFIG_SND_SOC_ZX_AUD96P22=m -CONFIG_SND_SOC_MAX9759=m -CONFIG_SND_SOC_MT6351=m -CONFIG_SND_SOC_MT6358=m -CONFIG_SND_SOC_NAU8540=m -CONFIG_SND_SOC_NAU8810=m -CONFIG_SND_SOC_NAU8822=m -CONFIG_SND_SOC_NAU8824=m -CONFIG_SND_SOC_NAU8825=m -CONFIG_SND_SOC_TPA6130A2=m -# end of CODEC drivers - -CONFIG_SND_SIMPLE_CARD_UTILS=m -CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_X86=y -CONFIG_HDMI_LPE_AUDIO=m -CONFIG_SND_SYNTH_EMUX=m -CONFIG_SND_XEN_FRONTEND=m -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -CONFIG_HID_ACCUTOUCH=m -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -CONFIG_HID_APPLEIR=m -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -CONFIG_HID_BIGBEN_FF=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -CONFIG_HID_ELAN=m -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -CONFIG_HID_GFRM=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_GOOGLE_HAMMER=m -CONFIG_HID_GT683R=m -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -CONFIG_HID_VIEWSONIC=m -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -CONFIG_HID_ITE=m -CONFIG_HID_JABRA=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MALTRON=m -CONFIG_HID_MAYFLASH=m -CONFIG_HID_REDRAGON=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -CONFIG_HID_NTI=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LCD=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -CONFIG_HID_RETRODE=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -CONFIG_HID_STEAM=m -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_HYPERV_MOUSE=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_UDRAW_PS3=m -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -CONFIG_I2C_HID=m -# end of I2C HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_C67X00_HCD=m -CONFIG_USB_XHCI_HCD=y -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=y -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=y -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_FOTG210_HCD=m -CONFIG_USB_MAX3421_HCD=m -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_HCD_ISO=y -CONFIG_USB_SL811_CS=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m -CONFIG_USB_HCD_BCMA=m -CONFIG_USB_HCD_SSB=m -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=8 -CONFIG_USBIP_VHCI_NR_HCS=1 -CONFIG_USBIP_HOST=m -CONFIG_USBIP_VUDC=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# - -# -# MUSB DMA mode -# -CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_DWC3=m -CONFIG_USB_DWC3_ULPI=y -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -CONFIG_USB_DWC2_PCI=m -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1761_UDC=y -# CONFIG_USB_ISP1760_HOST_ROLE is not set -# CONFIG_USB_ISP1760_GADGET_ROLE is not set -CONFIG_USB_ISP1760_DUAL_ROLE=y - -# -# USB port drivers -# -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -CONFIG_USB_SERIAL_F8153X=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -CONFIG_USB_SERIAL_UPD78F0730=m -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -# CONFIG_USB_SISUSBVGA_CON is not set -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -CONFIG_USB_HUB_USB251XB=m -CONFIG_USB_HSIC_USB3503=m -CONFIG_USB_HSIC_USB4604=m -CONFIG_USB_LINK_LAYER_TEST=m -CONFIG_USB_CHAOSKEY=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -CONFIG_USB_GPIO_VBUS=m -CONFIG_TAHVO_USB=m -CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y -CONFIG_USB_ISP1301=m -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -CONFIG_USB_FOTG210_UDC=m -CONFIG_USB_GR_UDC=m -CONFIG_USB_R8A66597=m -CONFIG_USB_PXA27X=m -CONFIG_USB_MV_UDC=m -CONFIG_USB_MV_U3D=m -CONFIG_USB_SNP_CORE=m -# CONFIG_USB_M66592 is not set -CONFIG_USB_BDC_UDC=m - -# -# Platform Support -# -CONFIG_USB_BDC_PCI=m -CONFIG_USB_AMD5536UDC=m -CONFIG_USB_NET2272=m -CONFIG_USB_NET2272_DMA=y -CONFIG_USB_NET2280=m -CONFIG_USB_GOKU=m -CONFIG_USB_EG20T=m -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_F_TCM=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_GADGET_UAC1=y -# CONFIG_GADGET_UAC1_LEGACY is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_G_NCM=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_GADGET_TARGET=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_NOKIA=m -CONFIG_USB_G_ACM_MS=m -# CONFIG_USB_G_MULTI is not set -CONFIG_USB_G_HID=m -CONFIG_USB_G_DBGP=m -# CONFIG_USB_G_DBGP_PRINTK is not set -CONFIG_USB_G_DBGP_SERIAL=y -CONFIG_USB_G_WEBCAM=m -CONFIG_TYPEC=m -CONFIG_TYPEC_TCPM=m -CONFIG_TYPEC_TCPCI=m -CONFIG_TYPEC_RT1711H=m -CONFIG_TYPEC_FUSB302=m -CONFIG_TYPEC_UCSI=m -CONFIG_UCSI_CCG=m -CONFIG_UCSI_ACPI=m -CONFIG_TYPEC_TPS6598X=m - -# -# USB Type-C Multiplexer/DeMultiplexer Switch support -# -CONFIG_TYPEC_MUX_PI3USB30532=m -# end of USB Type-C Multiplexer/DeMultiplexer Switch support - -# -# USB Type-C Alternate Mode drivers -# -CONFIG_TYPEC_DP_ALTMODE=m -CONFIG_TYPEC_NVIDIA_ALTMODE=m -# end of USB Type-C Alternate Mode drivers - -CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_ROLES_INTEL_XHCI=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m -CONFIG_MMC=y -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_SDHCI_F_SDH30=m -CONFIG_MMC_WBSD=m -CONFIG_MMC_ALCOR=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m -CONFIG_MMC_SDRICOH_CS=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_USDHI6ROL0=m -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_MTK=m -CONFIG_MMC_SDHCI_XENON=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -CONFIG_MS_BLOCK=m - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=m -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -CONFIG_LEDS_88PM860X=m -CONFIG_LEDS_APU=m -CONFIG_LEDS_AS3645A=m -CONFIG_LEDS_LM3530=m -CONFIG_LEDS_LM3532=m -CONFIG_LEDS_LM3533=m -CONFIG_LEDS_LM3642=m -CONFIG_LEDS_LM3601X=m -CONFIG_LEDS_MT6323=m -CONFIG_LEDS_NET48XX=m -CONFIG_LEDS_WRAP=m -CONFIG_LEDS_PCA9532=m -CONFIG_LEDS_PCA9532_GPIO=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -CONFIG_LEDS_LP3952=m -CONFIG_LEDS_LP55XX_COMMON=m -CONFIG_LEDS_LP5521=m -CONFIG_LEDS_LP5523=m -CONFIG_LEDS_LP5562=m -CONFIG_LEDS_LP8501=m -CONFIG_LEDS_LP8788=m -CONFIG_LEDS_CLEVO_MAIL=m -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_WM831X_STATUS=m -CONFIG_LEDS_WM8350=m -CONFIG_LEDS_DA903X=m -CONFIG_LEDS_DA9052=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_INTEL_SS4200=m -CONFIG_LEDS_ADP5520=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_TCA6507=m -CONFIG_LEDS_TLC591XX=m -CONFIG_LEDS_MAX8997=m -CONFIG_LEDS_LM355x=m -CONFIG_LEDS_OT200=m -CONFIG_LEDS_MENF21BMC=m - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -CONFIG_LEDS_BLINKM=m -# CONFIG_LEDS_MLXCPLD is not set -# CONFIG_LEDS_MLXREG is not set -CONFIG_LEDS_USER=m -CONFIG_LEDS_NIC78BX=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -# CONFIG_LEDS_TRIGGER_MTD is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_ACTIVITY=m -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LEDS_TRIGGER_NETDEV=m -CONFIG_LEDS_TRIGGER_PATTERN=m -CONFIG_LEDS_TRIGGER_AUDIO=m -# CONFIG_ACCESSIBILITY is not set -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_CXGB3=m -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_INFINIBAND_VMWARE_PVRDMA=m -CONFIG_INFINIBAND_USNIC=m -CONFIG_RDMA_RXE=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -# CONFIG_EDAC_LEGACY_SYSFS is not set -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_DECODE_MCE=m -CONFIG_EDAC_GHES=y -CONFIG_EDAC_AMD64=m -# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set -CONFIG_EDAC_AMD76X=m -CONFIG_EDAC_E7XXX=m -CONFIG_EDAC_E752X=m -CONFIG_EDAC_I82875P=m -CONFIG_EDAC_I82975X=m -CONFIG_EDAC_I3000=m -CONFIG_EDAC_I3200=m -CONFIG_EDAC_IE31200=m -CONFIG_EDAC_X38=m -CONFIG_EDAC_I5400=m -CONFIG_EDAC_I7CORE=m -CONFIG_EDAC_I82860=m -CONFIG_EDAC_R82600=m -CONFIG_EDAC_I5000=m -CONFIG_EDAC_I5100=m -CONFIG_EDAC_I7300=m -CONFIG_RTC_LIB=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_88PM860X=m -CONFIG_RTC_DRV_88PM80X=m -CONFIG_RTC_DRV_ABB5ZES3=m -CONFIG_RTC_DRV_ABEOZ9=m -CONFIG_RTC_DRV_ABX80X=m -CONFIG_RTC_DRV_DS1307=m -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -CONFIG_RTC_DRV_DS1374=m -CONFIG_RTC_DRV_DS1374_WDT=y -CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_LP8788=m -CONFIG_RTC_DRV_MAX6900=m -CONFIG_RTC_DRV_MAX8907=m -CONFIG_RTC_DRV_MAX8925=m -CONFIG_RTC_DRV_MAX8998=m -CONFIG_RTC_DRV_MAX8997=m -CONFIG_RTC_DRV_RS5C372=m -CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_ISL12022=m -CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF8523=m -CONFIG_RTC_DRV_PCF85063=m -CONFIG_RTC_DRV_PCF85363=m -CONFIG_RTC_DRV_PCF8563=m -CONFIG_RTC_DRV_PCF8583=m -CONFIG_RTC_DRV_M41T80=m -CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_PALMAS=m -CONFIG_RTC_DRV_TPS6586X=m -CONFIG_RTC_DRV_TPS65910=m -CONFIG_RTC_DRV_TPS80031=m -CONFIG_RTC_DRV_RC5T583=m -CONFIG_RTC_DRV_S35390A=m -CONFIG_RTC_DRV_FM3130=m -CONFIG_RTC_DRV_RX8010=m -CONFIG_RTC_DRV_RX8581=m -CONFIG_RTC_DRV_RX8025=m -CONFIG_RTC_DRV_EM3027=m -CONFIG_RTC_DRV_RV3028=m -CONFIG_RTC_DRV_RV8803=m -CONFIG_RTC_DRV_S5M=m -CONFIG_RTC_DRV_SD3078=m - -# -# SPI RTC drivers -# -CONFIG_RTC_DRV_M41T93=m -CONFIG_RTC_DRV_M41T94=m -CONFIG_RTC_DRV_DS1302=m -CONFIG_RTC_DRV_DS1305=m -CONFIG_RTC_DRV_DS1343=m -CONFIG_RTC_DRV_DS1347=m -CONFIG_RTC_DRV_DS1390=m -CONFIG_RTC_DRV_MAX6916=m -CONFIG_RTC_DRV_R9701=m -CONFIG_RTC_DRV_RX4581=m -CONFIG_RTC_DRV_RX6110=m -CONFIG_RTC_DRV_RS5C348=m -CONFIG_RTC_DRV_MAX6902=m -CONFIG_RTC_DRV_PCF2123=m -CONFIG_RTC_DRV_MCP795=m -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -CONFIG_RTC_DRV_DS3232=m -CONFIG_RTC_DRV_DS3232_HWMON=y -CONFIG_RTC_DRV_PCF2127=m -CONFIG_RTC_DRV_RV3029C2=m -CONFIG_RTC_DRV_RV3029_HWMON=y - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_VRTC=m -CONFIG_RTC_DRV_DS1286=m -CONFIG_RTC_DRV_DS1511=m -CONFIG_RTC_DRV_DS1553=m -CONFIG_RTC_DRV_DS1685_FAMILY=m -CONFIG_RTC_DRV_DS1685=y -# CONFIG_RTC_DRV_DS1689 is not set -# CONFIG_RTC_DRV_DS17285 is not set -# CONFIG_RTC_DRV_DS17485 is not set -# CONFIG_RTC_DRV_DS17885 is not set -CONFIG_RTC_DRV_DS1742=m -CONFIG_RTC_DRV_DS2404=m -CONFIG_RTC_DRV_DA9052=m -CONFIG_RTC_DRV_DA9055=m -CONFIG_RTC_DRV_DA9063=m -CONFIG_RTC_DRV_STK17TA8=m -CONFIG_RTC_DRV_M48T86=m -CONFIG_RTC_DRV_M48T35=m -CONFIG_RTC_DRV_M48T59=m -CONFIG_RTC_DRV_MSM6242=m -CONFIG_RTC_DRV_BQ4802=m -CONFIG_RTC_DRV_RP5C01=m -CONFIG_RTC_DRV_V3020=m -CONFIG_RTC_DRV_WM831X=m -CONFIG_RTC_DRV_WM8350=m -CONFIG_RTC_DRV_PCF50633=m -CONFIG_RTC_DRV_AB3100=m -CONFIG_RTC_DRV_CROS_EC=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_FTRTC010=m -CONFIG_RTC_DRV_PCAP=m -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_MT6397=m - -# -# HID Sensor RTC drivers -# -CONFIG_RTC_DRV_HID_SENSOR_TIME=m -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=m -CONFIG_DMA_ACPI=y -CONFIG_ALTERA_MSGDMA=m -CONFIG_INTEL_IDMA64=m -CONFIG_PCH_DMA=m -CONFIG_TIMB_DMA=m -CONFIG_QCOM_HIDMA_MGMT=m -CONFIG_QCOM_HIDMA=m -CONFIG_DW_DMAC_CORE=m -CONFIG_DW_DMAC=m -CONFIG_DW_DMAC_PCI=m -CONFIG_HSU_DMA=m -CONFIG_HSU_DMA_PCI=m - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# end of DMABUF options - -CONFIG_AUXDISPLAY=y -CONFIG_HD44780=m -CONFIG_KS0108=m -CONFIG_KS0108_PORT=0x378 -CONFIG_KS0108_DELAY=2 -CONFIG_CFAG12864B=m -CONFIG_CFAG12864B_RATE=20 -CONFIG_IMG_ASCII_LCD=m -CONFIG_PARPORT_PANEL=m -CONFIG_PANEL_PARPORT=0 -CONFIG_PANEL_PROFILE=5 -# CONFIG_PANEL_CHANGE_MESSAGE is not set -# CONFIG_CHARLCD_BL_OFF is not set -# CONFIG_CHARLCD_BL_ON is not set -CONFIG_CHARLCD_BL_FLASH=y -CONFIG_PANEL=m -CONFIG_CHARLCD=m -CONFIG_UIO=m -CONFIG_UIO_CIF=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_UIO_DMEM_GENIRQ=m -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -CONFIG_UIO_PRUSS=m -CONFIG_UIO_MF624=m -CONFIG_UIO_HV_GENERIC=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -CONFIG_VFIO_NOIOMMU=y -CONFIG_VFIO_PCI=m -CONFIG_VFIO_PCI_VGA=y -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -CONFIG_VFIO_PCI_IGD=y -CONFIG_VFIO_MDEV=m -CONFIG_VFIO_MDEV_DEVICE=m -CONFIG_IRQ_BYPASS_MANAGER=m -CONFIG_VIRT_DRIVERS=y -CONFIG_VBOXGUEST=m -CONFIG_VIRTIO=y -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y - -# -# Microsoft Hyper-V guest support -# -CONFIG_HYPERV=m -CONFIG_HYPERV_UTILS=m -CONFIG_HYPERV_BALLOON=m -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SELFBALLOONING=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=4 -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_TMEM=m -CONFIG_XEN_PCIDEV_BACKEND=m -CONFIG_XEN_PVCALLS_FRONTEND=m -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_ACPI_PROCESSOR=y -CONFIG_XEN_HAVE_PVMMU=y -CONFIG_XEN_AUTO_XLATE=y -CONFIG_XEN_ACPI=y -CONFIG_XEN_SYMS=y -CONFIG_XEN_HAVE_VPMU=y -CONFIG_XEN_FRONT_PGDIR_SHBUF=m -# end of Xen driver support - -CONFIG_STAGING=y -CONFIG_PRISM2_USB=m -CONFIG_COMEDI=m -# CONFIG_COMEDI_DEBUG is not set -CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048 -CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480 -CONFIG_COMEDI_MISC_DRIVERS=y -CONFIG_COMEDI_BOND=m -CONFIG_COMEDI_TEST=m -CONFIG_COMEDI_PARPORT=m -CONFIG_COMEDI_SSV_DNP=m -CONFIG_COMEDI_ISA_DRIVERS=y -CONFIG_COMEDI_PCL711=m -CONFIG_COMEDI_PCL724=m -CONFIG_COMEDI_PCL726=m -CONFIG_COMEDI_PCL730=m -CONFIG_COMEDI_PCL812=m -CONFIG_COMEDI_PCL816=m -CONFIG_COMEDI_PCL818=m -CONFIG_COMEDI_PCM3724=m -CONFIG_COMEDI_AMPLC_DIO200_ISA=m -CONFIG_COMEDI_AMPLC_PC236_ISA=m -CONFIG_COMEDI_AMPLC_PC263_ISA=m -CONFIG_COMEDI_RTI800=m -CONFIG_COMEDI_RTI802=m -CONFIG_COMEDI_DAC02=m -CONFIG_COMEDI_DAS16M1=m -CONFIG_COMEDI_DAS08_ISA=m -CONFIG_COMEDI_DAS16=m -CONFIG_COMEDI_DAS800=m -CONFIG_COMEDI_DAS1800=m -CONFIG_COMEDI_DAS6402=m -CONFIG_COMEDI_DT2801=m -CONFIG_COMEDI_DT2811=m -CONFIG_COMEDI_DT2814=m -CONFIG_COMEDI_DT2815=m -CONFIG_COMEDI_DT2817=m -CONFIG_COMEDI_DT282X=m -CONFIG_COMEDI_DMM32AT=m -CONFIG_COMEDI_FL512=m -CONFIG_COMEDI_AIO_AIO12_8=m -CONFIG_COMEDI_AIO_IIRO_16=m -CONFIG_COMEDI_II_PCI20KC=m -CONFIG_COMEDI_C6XDIGIO=m -CONFIG_COMEDI_MPC624=m -CONFIG_COMEDI_ADQ12B=m -CONFIG_COMEDI_NI_AT_A2150=m -CONFIG_COMEDI_NI_AT_AO=m -CONFIG_COMEDI_NI_ATMIO=m -CONFIG_COMEDI_NI_ATMIO16D=m -CONFIG_COMEDI_NI_LABPC_ISA=m -CONFIG_COMEDI_PCMAD=m -CONFIG_COMEDI_PCMDA12=m -CONFIG_COMEDI_PCMMIO=m -CONFIG_COMEDI_PCMUIO=m -CONFIG_COMEDI_MULTIQ3=m -CONFIG_COMEDI_S526=m -CONFIG_COMEDI_PCI_DRIVERS=m -CONFIG_COMEDI_8255_PCI=m -CONFIG_COMEDI_ADDI_WATCHDOG=m -CONFIG_COMEDI_ADDI_APCI_1032=m -CONFIG_COMEDI_ADDI_APCI_1500=m -CONFIG_COMEDI_ADDI_APCI_1516=m -CONFIG_COMEDI_ADDI_APCI_1564=m -CONFIG_COMEDI_ADDI_APCI_16XX=m -CONFIG_COMEDI_ADDI_APCI_2032=m -CONFIG_COMEDI_ADDI_APCI_2200=m -CONFIG_COMEDI_ADDI_APCI_3120=m -CONFIG_COMEDI_ADDI_APCI_3501=m -CONFIG_COMEDI_ADDI_APCI_3XXX=m -CONFIG_COMEDI_ADL_PCI6208=m -CONFIG_COMEDI_ADL_PCI7X3X=m -CONFIG_COMEDI_ADL_PCI8164=m -CONFIG_COMEDI_ADL_PCI9111=m -CONFIG_COMEDI_ADL_PCI9118=m -CONFIG_COMEDI_ADV_PCI1710=m -CONFIG_COMEDI_ADV_PCI1720=m -CONFIG_COMEDI_ADV_PCI1723=m -CONFIG_COMEDI_ADV_PCI1724=m -CONFIG_COMEDI_ADV_PCI1760=m -CONFIG_COMEDI_ADV_PCI_DIO=m -CONFIG_COMEDI_AMPLC_DIO200_PCI=m -CONFIG_COMEDI_AMPLC_PC236_PCI=m -CONFIG_COMEDI_AMPLC_PC263_PCI=m -CONFIG_COMEDI_AMPLC_PCI224=m -CONFIG_COMEDI_AMPLC_PCI230=m -CONFIG_COMEDI_CONTEC_PCI_DIO=m -CONFIG_COMEDI_DAS08_PCI=m -CONFIG_COMEDI_DT3000=m -CONFIG_COMEDI_DYNA_PCI10XX=m -CONFIG_COMEDI_GSC_HPDI=m -CONFIG_COMEDI_MF6X4=m -CONFIG_COMEDI_ICP_MULTI=m -CONFIG_COMEDI_DAQBOARD2000=m -CONFIG_COMEDI_JR3_PCI=m -CONFIG_COMEDI_KE_COUNTER=m -CONFIG_COMEDI_CB_PCIDAS64=m -CONFIG_COMEDI_CB_PCIDAS=m -CONFIG_COMEDI_CB_PCIDDA=m -CONFIG_COMEDI_CB_PCIMDAS=m -CONFIG_COMEDI_CB_PCIMDDA=m -CONFIG_COMEDI_ME4000=m -CONFIG_COMEDI_ME_DAQ=m -CONFIG_COMEDI_NI_6527=m -CONFIG_COMEDI_NI_65XX=m -CONFIG_COMEDI_NI_660X=m -CONFIG_COMEDI_NI_670X=m -CONFIG_COMEDI_NI_LABPC_PCI=m -CONFIG_COMEDI_NI_PCIDIO=m -CONFIG_COMEDI_NI_PCIMIO=m -CONFIG_COMEDI_RTD520=m -CONFIG_COMEDI_S626=m -CONFIG_COMEDI_MITE=m -CONFIG_COMEDI_NI_TIOCMD=m -CONFIG_COMEDI_PCMCIA_DRIVERS=m -CONFIG_COMEDI_CB_DAS16_CS=m -CONFIG_COMEDI_DAS08_CS=m -CONFIG_COMEDI_NI_DAQ_700_CS=m -CONFIG_COMEDI_NI_DAQ_DIO24_CS=m -CONFIG_COMEDI_NI_LABPC_CS=m -CONFIG_COMEDI_NI_MIO_CS=m -CONFIG_COMEDI_QUATECH_DAQP_CS=m -CONFIG_COMEDI_USB_DRIVERS=m -CONFIG_COMEDI_DT9812=m -CONFIG_COMEDI_NI_USB6501=m -CONFIG_COMEDI_USBDUX=m -CONFIG_COMEDI_USBDUXFAST=m -CONFIG_COMEDI_USBDUXSIGMA=m -CONFIG_COMEDI_VMK80XX=m -CONFIG_COMEDI_8254=m -CONFIG_COMEDI_8255=m -CONFIG_COMEDI_8255_SA=m -CONFIG_COMEDI_KCOMEDILIB=m -CONFIG_COMEDI_AMPLC_DIO200=m -CONFIG_COMEDI_AMPLC_PC236=m -CONFIG_COMEDI_DAS08=m -CONFIG_COMEDI_ISADMA=m -CONFIG_COMEDI_NI_LABPC=m -CONFIG_COMEDI_NI_LABPC_ISADMA=m -CONFIG_COMEDI_NI_TIO=m -CONFIG_COMEDI_NI_ROUTING=m -CONFIG_RTL8192U=m -CONFIG_RTLLIB=m -CONFIG_RTLLIB_CRYPTO_CCMP=m -CONFIG_RTLLIB_CRYPTO_TKIP=m -CONFIG_RTLLIB_CRYPTO_WEP=m -CONFIG_RTL8192E=m -CONFIG_RTL8723BS=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -CONFIG_RTS5208=m -CONFIG_VT6655=m -CONFIG_VT6656=m - -# -# IIO staging drivers -# - -# -# Accelerometers -# -CONFIG_ADIS16203=m -CONFIG_ADIS16240=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD7816=m -CONFIG_AD7192=m -CONFIG_AD7280=m -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -CONFIG_ADT7316=m -CONFIG_ADT7316_SPI=m -CONFIG_ADT7316_I2C=m -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -CONFIG_AD7150=m -CONFIG_AD7746=m -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -CONFIG_AD9832=m -CONFIG_AD9834=m -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -CONFIG_AD5933=m -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -CONFIG_ADE7854=m -CONFIG_ADE7854_I2C=m -CONFIG_ADE7854_SPI=m -# end of Active energy metering IC - -# -# Resolver to digital converters -# -CONFIG_AD2S1210=m -# end of Resolver to digital converters -# end of IIO staging drivers - -CONFIG_FB_SM750=m - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_ACNTPC=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_DECPC=m -CONFIG_SPEAKUP_SYNTH_DTLK=m -CONFIG_SPEAKUP_SYNTH_KEYPC=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -CONFIG_STAGING_MEDIA=y -CONFIG_I2C_BCM2048=m -# CONFIG_VIDEO_IPU3_IMGU is not set - -# -# soc_camera sensor drivers -# - -# -# Android -# -# end of Android - -CONFIG_LTE_GDM724X=m -CONFIG_FIREWIRE_SERIAL=m -CONFIG_FWTTY_MAX_TOTAL_PORTS=64 -CONFIG_FWTTY_MAX_CARD_PORTS=32 -CONFIG_GS_FPGABOOT=m -# CONFIG_UNISYSSPAR is not set -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_FB_FLEX=m -CONFIG_FB_TFT_FBTFT_DEVICE=m -CONFIG_WILC1000=m -CONFIG_WILC1000_SDIO=m -CONFIG_WILC1000_SPI=m -# CONFIG_WILC1000_HW_OOB_INTR is not set -CONFIG_MOST=m -CONFIG_MOST_CDEV=m -CONFIG_MOST_NET=m -CONFIG_MOST_SOUND=m -CONFIG_MOST_VIDEO=m -CONFIG_MOST_I2C=m -CONFIG_MOST_USB=m -CONFIG_KS7010=m -# CONFIG_GREYBUS is not set -# CONFIG_PI433 is not set - -# -# Gasket devices -# -# end of Gasket devices - -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set -CONFIG_FIELDBUS_DEV=m -# CONFIG_KPC2000 is not set -CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACER_WMI=m -CONFIG_ACER_WIRELESS=m -CONFIG_ACERHDF=m -CONFIG_ALIENWARE_WMI=m -CONFIG_ASUS_LAPTOP=m -CONFIG_DCDBAS=m -CONFIG_DELL_SMBIOS=m -CONFIG_DELL_SMBIOS_WMI=y -CONFIG_DELL_SMBIOS_SMM=y -CONFIG_DELL_LAPTOP=m -CONFIG_DELL_WMI=m -CONFIG_DELL_WMI_DESCRIPTOR=m -CONFIG_DELL_WMI_AIO=m -CONFIG_DELL_WMI_LED=m -CONFIG_DELL_SMO8800=m -CONFIG_DELL_RBTN=m -CONFIG_DELL_RBU=m -CONFIG_FUJITSU_LAPTOP=m -CONFIG_FUJITSU_TABLET=m -CONFIG_AMILO_RFKILL=m -# CONFIG_GPD_POCKET_FAN is not set -CONFIG_TC1100_WMI=m -CONFIG_HP_ACCEL=m -CONFIG_HP_WIRELESS=m -CONFIG_HP_WMI=m -CONFIG_LG_LAPTOP=m -CONFIG_MSI_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y -CONFIG_IDEAPAD_LAPTOP=m -CONFIG_SURFACE3_WMI=m -CONFIG_THINKPAD_ACPI=m -CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y -CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y -# CONFIG_THINKPAD_ACPI_DEBUG is not set -# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set -CONFIG_THINKPAD_ACPI_VIDEO=y -CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_SENSORS_HDAPS=m -CONFIG_INTEL_MENLOW=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_ASUS_WMI=m -CONFIG_ASUS_NB_WMI=m -CONFIG_EEEPC_WMI=m -CONFIG_ASUS_WIRELESS=m -CONFIG_ACPI_WMI=m -CONFIG_WMI_BMOF=m -CONFIG_INTEL_WMI_THUNDERBOLT=m -CONFIG_MSI_WMI=m -CONFIG_PEAQ_WMI=m -CONFIG_TOPSTAR_LAPTOP=m -CONFIG_ACPI_TOSHIBA=m -CONFIG_TOSHIBA_BT_RFKILL=m -CONFIG_TOSHIBA_HAPS=m -CONFIG_TOSHIBA_WMI=m -CONFIG_INTEL_CHT_INT33FE=m -CONFIG_INTEL_INT0002_VGPIO=m -CONFIG_INTEL_HID_EVENT=m -CONFIG_INTEL_VBTN=m -CONFIG_INTEL_SCU_IPC=y -CONFIG_INTEL_SCU_IPC_UTIL=m -CONFIG_INTEL_MID_POWER_BUTTON=m -CONFIG_INTEL_MFLD_THERMAL=m -CONFIG_INTEL_IPS=m -CONFIG_INTEL_PMC_CORE=y -CONFIG_IBM_RTL=m -CONFIG_SAMSUNG_LAPTOP=m -CONFIG_MXM_WMI=m -CONFIG_INTEL_OAKTRAIL=m -CONFIG_APPLE_GMUX=m -CONFIG_INTEL_RST=m -CONFIG_INTEL_SMARTCONNECT=m -CONFIG_INTEL_PMC_IPC=m -CONFIG_INTEL_BXTWC_PMIC_TMU=m -CONFIG_SURFACE_PRO3_BUTTON=m -CONFIG_SURFACE_3_BUTTON=m -CONFIG_INTEL_PUNIT_IPC=m -# CONFIG_MLX_PLATFORM is not set -# CONFIG_TOUCHSCREEN_DMI is not set -CONFIG_INTEL_CHTDC_TI_PWRBTN=m -CONFIG_I2C_MULTI_INSTANTIATE=m -CONFIG_INTEL_ATOMISP2_PM=m -# CONFIG_HUAWEI_WMI is not set -CONFIG_PCENGINES_APU2=m -CONFIG_PMC_ATOM=y -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_LAPTOP=m -CONFIG_CHROMEOS_PSTORE=m -CONFIG_CHROMEOS_TBMC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_LPC=m -# CONFIG_CROS_EC_LPC_MEC is not set -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_KBD_LED_BACKLIGHT=m -CONFIG_CROS_EC_LIGHTBAR=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SYSFS=m -CONFIG_CROS_USBPD_LOGGER=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_WM831X=m -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_SI5351=m -CONFIG_COMMON_CLK_SI544=m -CONFIG_COMMON_CLK_CDCE706=m -CONFIG_COMMON_CLK_CS2000_CP=m -CONFIG_COMMON_CLK_S2MPS11=m -CONFIG_CLK_TWL6040=m -CONFIG_COMMON_CLK_PALMAS=m -CONFIG_COMMON_CLK_PWM=m -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_CLKSRC_I8253=y -CONFIG_CLKEVT_I8253=y -CONFIG_I8253_LOCK=y -CONFIG_CLKBLD_I8253=y -CONFIG_DW_APB_TIMER=y -# end of Clock Source drivers - -CONFIG_MAILBOX=y -CONFIG_PCC=y -CONFIG_ALTERA_MBOX=m -CONFIG_IOMMU_IOVA=y -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_DMAR_TABLE=y -CONFIG_INTEL_IOMMU=y -CONFIG_INTEL_IOMMU_SVM=y -# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set -CONFIG_INTEL_IOMMU_FLOPPY_WA=y -CONFIG_HYPERV_IOMMU=y - -# -# Remoteproc drivers -# -CONFIG_REMOTEPROC=m -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -CONFIG_RPMSG=m -# CONFIG_RPMSG_CHAR is not set -CONFIG_RPMSG_QCOM_GLINK_NATIVE=m -CONFIG_RPMSG_QCOM_GLINK_RPM=m -CONFIG_RPMSG_VIRTIO=m -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -# end of i.MX SoC drivers - -# -# IXP4xx SoC drivers -# -# CONFIG_IXP4XX_QMGR is not set -# CONFIG_IXP4XX_NPE is not set -# end of IXP4xx SoC drivers - -# -# Qualcomm SoC drivers -# -# end of Qualcomm SoC drivers - -CONFIG_SOC_TI=y - -# -# Xilinx SoC drivers -# -# CONFIG_XILINX_VCU is not set -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y -CONFIG_DEVFREQ_GOV_PASSIVE=m - -# -# DEVFREQ Drivers -# -CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -CONFIG_EXTCON_ADC_JACK=m -CONFIG_EXTCON_ARIZONA=m -CONFIG_EXTCON_AXP288=m -CONFIG_EXTCON_GPIO=m -CONFIG_EXTCON_INTEL_INT3496=m -CONFIG_EXTCON_INTEL_CHT_WC=m -CONFIG_EXTCON_MAX14577=m -CONFIG_EXTCON_MAX3355=m -CONFIG_EXTCON_MAX77693=m -CONFIG_EXTCON_MAX77843=m -CONFIG_EXTCON_MAX8997=m -CONFIG_EXTCON_PALMAS=m -CONFIG_EXTCON_PTN5150=m -CONFIG_EXTCON_RT8973A=m -CONFIG_EXTCON_SM5502=m -CONFIG_EXTCON_USB_GPIO=m -CONFIG_EXTCON_USBC_CROS_EC=m -CONFIG_MEMORY=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=m -CONFIG_IIO_BUFFER_HW_CONSUMER=m -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -CONFIG_IIO_CONFIGFS=m -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -CONFIG_IIO_SW_DEVICE=m -CONFIG_IIO_SW_TRIGGER=m -CONFIG_IIO_TRIGGERED_EVENT=m - -# -# Accelerometers -# -CONFIG_ADIS16201=m -CONFIG_ADIS16209=m -CONFIG_ADXL372=m -CONFIG_ADXL372_SPI=m -CONFIG_ADXL372_I2C=m -CONFIG_BMA180=m -CONFIG_BMA220=m -CONFIG_BMC150_ACCEL=m -CONFIG_BMC150_ACCEL_I2C=m -CONFIG_BMC150_ACCEL_SPI=m -CONFIG_DA280=m -CONFIG_DA311=m -CONFIG_DMARD09=m -CONFIG_DMARD10=m -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -CONFIG_KXSD9=m -CONFIG_KXSD9_SPI=m -CONFIG_KXSD9_I2C=m -CONFIG_KXCJK1013=m -CONFIG_MC3230=m -CONFIG_MMA7455=m -CONFIG_MMA7455_I2C=m -CONFIG_MMA7455_SPI=m -CONFIG_MMA7660=m -CONFIG_MMA8452=m -CONFIG_MMA9551_CORE=m -CONFIG_MMA9551=m -CONFIG_MMA9553=m -CONFIG_MXC4005=m -CONFIG_MXC6255=m -CONFIG_SCA3000=m -CONFIG_STK8312=m -CONFIG_STK8BA50=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD_SIGMA_DELTA=m -CONFIG_AD7124=m -CONFIG_AD7266=m -CONFIG_AD7291=m -CONFIG_AD7298=m -CONFIG_AD7476=m -CONFIG_AD7606=m -CONFIG_AD7606_IFACE_PARALLEL=m -CONFIG_AD7606_IFACE_SPI=m -CONFIG_AD7766=m -CONFIG_AD7768_1=m -CONFIG_AD7780=m -CONFIG_AD7791=m -CONFIG_AD7793=m -CONFIG_AD7887=m -CONFIG_AD7923=m -CONFIG_AD7949=m -CONFIG_AD799X=m -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -CONFIG_CC10001_ADC=m -CONFIG_DA9150_GPADC=m -CONFIG_DLN2_ADC=m -CONFIG_HI8435=m -CONFIG_HX711=m -CONFIG_INA2XX_ADC=m -CONFIG_LP8788_ADC=m -CONFIG_LTC2471=m -CONFIG_LTC2485=m -CONFIG_LTC2497=m -CONFIG_MAX1027=m -CONFIG_MAX11100=m -CONFIG_MAX1118=m -CONFIG_MAX1363=m -CONFIG_MAX9611=m -CONFIG_MCP320X=m -CONFIG_MCP3422=m -CONFIG_MCP3911=m -CONFIG_MEN_Z188_ADC=m -CONFIG_NAU7802=m -CONFIG_PALMAS_GPADC=m -CONFIG_QCOM_VADC_COMMON=m -CONFIG_QCOM_SPMI_IADC=m -CONFIG_QCOM_SPMI_VADC=m -CONFIG_QCOM_SPMI_ADC5=m -CONFIG_TI_ADC081C=m -CONFIG_TI_ADC0832=m -CONFIG_TI_ADC084S021=m -CONFIG_TI_ADC12138=m -CONFIG_TI_ADC108S102=m -CONFIG_TI_ADC128S052=m -CONFIG_TI_ADC161S626=m -CONFIG_TI_ADS1015=m -CONFIG_TI_ADS7950=m -CONFIG_TI_AM335X_ADC=m -CONFIG_TI_TLC4541=m -CONFIG_TWL4030_MADC=m -CONFIG_TWL6030_GPADC=m -CONFIG_VIPERBOARD_ADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# end of Analog Front Ends - -# -# Amplifiers -# -CONFIG_AD8366=m -# end of Amplifiers - -# -# Chemical Sensors -# -CONFIG_ATLAS_PH_SENSOR=m -CONFIG_BME680=m -CONFIG_BME680_I2C=m -CONFIG_BME680_SPI=m -CONFIG_CCS811=m -CONFIG_IAQCORE=m -CONFIG_PMS7003=m -CONFIG_SENSIRION_SGP30=m -CONFIG_SPS30=m -CONFIG_VZ89X=m -# end of Chemical Sensors - -CONFIG_IIO_CROS_EC_SENSORS_CORE=m -CONFIG_IIO_CROS_EC_SENSORS=m - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -CONFIG_IIO_MS_SENSORS_I2C=m - -# -# SSP Sensor Common -# -CONFIG_IIO_SSP_SENSORS_COMMONS=m -CONFIG_IIO_SSP_SENSORHUB=m -# end of SSP Sensor Common - -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_SPI=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Digital to analog converters -# -CONFIG_AD5064=m -CONFIG_AD5360=m -CONFIG_AD5380=m -CONFIG_AD5421=m -CONFIG_AD5446=m -CONFIG_AD5449=m -CONFIG_AD5592R_BASE=m -CONFIG_AD5592R=m -CONFIG_AD5593R=m -CONFIG_AD5504=m -CONFIG_AD5624R_SPI=m -CONFIG_LTC1660=m -CONFIG_LTC2632=m -CONFIG_AD5686=m -CONFIG_AD5686_SPI=m -CONFIG_AD5696_I2C=m -CONFIG_AD5755=m -CONFIG_AD5758=m -CONFIG_AD5761=m -CONFIG_AD5764=m -CONFIG_AD5791=m -CONFIG_AD7303=m -CONFIG_AD8801=m -CONFIG_DS4424=m -CONFIG_M62332=m -CONFIG_MAX517=m -CONFIG_MCP4725=m -CONFIG_MCP4922=m -CONFIG_TI_DAC082S085=m -CONFIG_TI_DAC5571=m -CONFIG_TI_DAC7311=m -CONFIG_TI_DAC7612=m -# end of Digital to analog converters - -# -# IIO dummy driver -# -CONFIG_IIO_SIMPLE_DUMMY=m -# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set -# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -CONFIG_AD9523=m -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -CONFIG_ADF4350=m -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -CONFIG_ADIS16080=m -CONFIG_ADIS16130=m -CONFIG_ADIS16136=m -CONFIG_ADIS16260=m -CONFIG_ADXRS450=m -CONFIG_BMG160=m -CONFIG_BMG160_I2C=m -CONFIG_BMG160_SPI=m -CONFIG_FXAS21002C=m -CONFIG_FXAS21002C_I2C=m -CONFIG_FXAS21002C_SPI=m -CONFIG_HID_SENSOR_GYRO_3D=m -CONFIG_MPU3050=m -CONFIG_MPU3050_I2C=m -CONFIG_IIO_ST_GYRO_3AXIS=m -CONFIG_IIO_ST_GYRO_I2C_3AXIS=m -CONFIG_IIO_ST_GYRO_SPI_3AXIS=m -CONFIG_ITG3200=m -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -CONFIG_AFE4403=m -CONFIG_AFE4404=m -CONFIG_MAX30100=m -CONFIG_MAX30102=m -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -CONFIG_AM2315=m -CONFIG_DHT11=m -CONFIG_HDC100X=m -CONFIG_HID_SENSOR_HUMIDITY=m -CONFIG_HTS221=m -CONFIG_HTS221_I2C=m -CONFIG_HTS221_SPI=m -CONFIG_HTU21=m -CONFIG_SI7005=m -CONFIG_SI7020=m -# end of Humidity sensors - -# -# Inertial measurement units -# -CONFIG_ADIS16400=m -CONFIG_ADIS16480=m -CONFIG_BMI160=m -CONFIG_BMI160_I2C=m -CONFIG_BMI160_SPI=m -CONFIG_KMX61=m -CONFIG_INV_MPU6050_IIO=m -CONFIG_INV_MPU6050_I2C=m -CONFIG_INV_MPU6050_SPI=m -CONFIG_IIO_ST_LSM6DSX=m -CONFIG_IIO_ST_LSM6DSX_I2C=m -CONFIG_IIO_ST_LSM6DSX_SPI=m -# end of Inertial measurement units - -CONFIG_IIO_ADIS_LIB=m -CONFIG_IIO_ADIS_LIB_BUFFER=y - -# -# Light sensors -# -CONFIG_ACPI_ALS=m -CONFIG_ADJD_S311=m -CONFIG_AL3320A=m -CONFIG_APDS9300=m -CONFIG_APDS9960=m -CONFIG_BH1750=m -CONFIG_BH1780=m -CONFIG_CM32181=m -CONFIG_CM3232=m -CONFIG_CM3323=m -CONFIG_CM36651=m -CONFIG_IIO_CROS_EC_LIGHT_PROX=m -CONFIG_GP2AP020A00F=m -CONFIG_SENSORS_ISL29018=m -CONFIG_SENSORS_ISL29028=m -CONFIG_ISL29125=m -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -CONFIG_JSA1212=m -CONFIG_RPR0521=m -CONFIG_SENSORS_LM3533=m -CONFIG_LTR501=m -CONFIG_LV0104CS=m -CONFIG_MAX44000=m -CONFIG_MAX44009=m -CONFIG_OPT3001=m -CONFIG_PA12203001=m -CONFIG_SI1133=m -CONFIG_SI1145=m -CONFIG_STK3310=m -CONFIG_ST_UVIS25=m -CONFIG_ST_UVIS25_I2C=m -CONFIG_ST_UVIS25_SPI=m -CONFIG_TCS3414=m -CONFIG_TCS3472=m -CONFIG_SENSORS_TSL2563=m -CONFIG_TSL2583=m -CONFIG_TSL2772=m -CONFIG_TSL4531=m -CONFIG_US5182D=m -CONFIG_VCNL4000=m -CONFIG_VCNL4035=m -CONFIG_VEML6070=m -CONFIG_VL6180=m -CONFIG_ZOPT2201=m -# end of Light sensors - -# -# Magnetometer sensors -# -CONFIG_AK8975=m -CONFIG_AK09911=m -CONFIG_BMC150_MAGN=m -CONFIG_BMC150_MAGN_I2C=m -CONFIG_BMC150_MAGN_SPI=m -CONFIG_MAG3110=m -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -CONFIG_MMC35240=m -CONFIG_IIO_ST_MAGN_3AXIS=m -CONFIG_IIO_ST_MAGN_I2C_3AXIS=m -CONFIG_IIO_ST_MAGN_SPI_3AXIS=m -CONFIG_SENSORS_HMC5843=m -CONFIG_SENSORS_HMC5843_I2C=m -CONFIG_SENSORS_HMC5843_SPI=m -CONFIG_SENSORS_RM3100=m -CONFIG_SENSORS_RM3100_I2C=m -CONFIG_SENSORS_RM3100_SPI=m -# end of Magnetometer sensors - -# -# Multiplexers -# -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -CONFIG_IIO_HRTIMER_TRIGGER=m -CONFIG_IIO_INTERRUPT_TRIGGER=m -CONFIG_IIO_TIGHTLOOP_TRIGGER=m -CONFIG_IIO_SYSFS_TRIGGER=m -# end of Triggers - standalone - -# -# Digital potentiometers -# -CONFIG_AD5272=m -CONFIG_DS1803=m -CONFIG_MAX5481=m -CONFIG_MAX5487=m -CONFIG_MCP4018=m -CONFIG_MCP4131=m -CONFIG_MCP4531=m -CONFIG_MCP41010=m -CONFIG_TPL0102=m -# end of Digital potentiometers - -# -# Digital potentiostats -# -CONFIG_LMP91000=m -# end of Digital potentiostats - -# -# Pressure sensors -# -CONFIG_ABP060MG=m -CONFIG_BMP280=m -CONFIG_BMP280_I2C=m -CONFIG_BMP280_SPI=m -CONFIG_IIO_CROS_EC_BARO=m -CONFIG_HID_SENSOR_PRESS=m -CONFIG_HP03=m -CONFIG_MPL115=m -CONFIG_MPL115_I2C=m -CONFIG_MPL115_SPI=m -CONFIG_MPL3115=m -CONFIG_MS5611=m -CONFIG_MS5611_I2C=m -CONFIG_MS5611_SPI=m -CONFIG_MS5637=m -CONFIG_IIO_ST_PRESS=m -CONFIG_IIO_ST_PRESS_I2C=m -CONFIG_IIO_ST_PRESS_SPI=m -CONFIG_T5403=m -CONFIG_HP206C=m -CONFIG_ZPA2326=m -CONFIG_ZPA2326_I2C=m -CONFIG_ZPA2326_SPI=m -# end of Pressure sensors - -# -# Lightning sensors -# -CONFIG_AS3935=m -# end of Lightning sensors - -# -# Proximity and distance sensors -# -CONFIG_ISL29501=m -CONFIG_LIDAR_LITE_V2=m -CONFIG_MB1232=m -CONFIG_RFD77402=m -CONFIG_SRF04=m -CONFIG_SX9500=m -CONFIG_SRF08=m -CONFIG_VL53L0X_I2C=m -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -CONFIG_AD2S90=m -CONFIG_AD2S1200=m -# end of Resolver to digital converters - -# -# Temperature sensors -# -CONFIG_MAXIM_THERMOCOUPLE=m -CONFIG_HID_SENSOR_TEMP=m -CONFIG_MLX90614=m -CONFIG_MLX90632=m -CONFIG_TMP006=m -CONFIG_TMP007=m -CONFIG_TSYS01=m -CONFIG_TSYS02D=m -CONFIG_MAX31856=m -# end of Temperature sensors - -CONFIG_NTB=m -CONFIG_NTB_IDT=m -CONFIG_NTB_SWITCHTEC=m -CONFIG_NTB_PINGPONG=m -CONFIG_NTB_TOOL=m -CONFIG_NTB_PERF=m -CONFIG_NTB_TRANSPORT=m -CONFIG_VME_BUS=y - -# -# VME Bridge Drivers -# -CONFIG_VME_CA91CX42=m -CONFIG_VME_TSI148=m -# CONFIG_VME_FAKE is not set - -# -# VME Board Drivers -# -CONFIG_VMIVME_7805=m - -# -# VME Device Drivers -# -CONFIG_VME_USER=m -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_PWM_CRC=y -CONFIG_PWM_CROS_EC=m -CONFIG_PWM_LP3943=m -CONFIG_PWM_LPSS=m -CONFIG_PWM_LPSS_PCI=m -CONFIG_PWM_LPSS_PLATFORM=m -CONFIG_PWM_PCA9685=m -CONFIG_PWM_TWL=m -CONFIG_PWM_TWL_LED=m - -# -# IRQ chip support -# -CONFIG_ARM_GIC_MAX_NR=1 -CONFIG_MADERA_IRQ=m -# end of IRQ chip support - -CONFIG_IPACK_BUS=m -CONFIG_BOARD_TPCI200=m -CONFIG_SERIAL_IPOCTAL=m -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_TI_SYSCON=m -CONFIG_FMC=m -CONFIG_FMC_FAKEDEV=m -CONFIG_FMC_TRIVIAL=m -CONFIG_FMC_WRITE_EEPROM=m -CONFIG_FMC_CHARDEV=m - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_BCM_KONA_USB2_PHY=m -CONFIG_PHY_PXA_28NM_HSIC=m -CONFIG_PHY_PXA_28NM_USB2=m -CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_SAMSUNG_USB2=m -CONFIG_PHY_TUSB1210=m -# end of PHY Subsystem - -CONFIG_POWERCAP=y -CONFIG_INTEL_RAPL=m -# CONFIG_IDLE_INJECT is not set -CONFIG_MCB=m -CONFIG_MCB_PCI=m -CONFIG_MCB_LPC=m - -# -# Performance monitor support -# -# end of Performance monitor support - -CONFIG_RAS=y -CONFIG_THUNDERBOLT=m - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_LIBNVDIMM=y -CONFIG_BLK_DEV_PMEM=m -CONFIG_ND_BLK=m -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=m -CONFIG_BTT=y -CONFIG_NVDIMM_KEYS=y -CONFIG_DAX_DRIVER=y -CONFIG_DAX=y -CONFIG_DEV_DAX=m -CONFIG_DEV_DAX_KMEM=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_RAVE_SP_EEPROM=m - -# -# HW tracing support -# -CONFIG_STM=m -CONFIG_STM_PROTO_BASIC=m -CONFIG_STM_PROTO_SYS_T=m -CONFIG_STM_DUMMY=m -CONFIG_STM_SOURCE_CONSOLE=m -CONFIG_STM_SOURCE_HEARTBEAT=m -CONFIG_STM_SOURCE_FTRACE=m -CONFIG_INTEL_TH=m -CONFIG_INTEL_TH_PCI=m -CONFIG_INTEL_TH_ACPI=m -CONFIG_INTEL_TH_GTH=m -CONFIG_INTEL_TH_STH=m -CONFIG_INTEL_TH_MSU=m -CONFIG_INTEL_TH_PTI=m -# CONFIG_INTEL_TH_DEBUG is not set -# end of HW tracing support - -CONFIG_FPGA=m -CONFIG_ALTERA_PR_IP_CORE=m -CONFIG_FPGA_MGR_ALTERA_PS_SPI=m -CONFIG_FPGA_MGR_ALTERA_CVP=m -CONFIG_FPGA_MGR_XILINX_SPI=m -CONFIG_FPGA_MGR_MACHXO2_SPI=m -CONFIG_FPGA_BRIDGE=m -CONFIG_ALTERA_FREEZE_BRIDGE=m -CONFIG_XILINX_PR_DECOUPLER=m -CONFIG_FPGA_REGION=m -CONFIG_FPGA_DFL=m -CONFIG_FPGA_DFL_FME=m -CONFIG_FPGA_DFL_FME_MGR=m -CONFIG_FPGA_DFL_FME_BRIDGE=m -CONFIG_FPGA_DFL_FME_REGION=m -CONFIG_FPGA_DFL_AFU=m -CONFIG_FPGA_DFL_PCI=m -CONFIG_PM_OPP=y -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -CONFIG_COUNTER=m -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -CONFIG_FS_DAX=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -# CONFIG_EXPORTFS_BLOCK_OPS is not set -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=y -CONFIG_CUSE=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_DEFAULT_UTF8 is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_VMCORE=y -# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_MEMFD_CREATE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=y -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ORANGEFS_FS=m -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=y -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -# CONFIG_JFFS2_CMODE_PRIORITY is not set -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_UBIFS_FS=m -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_ATIME_SUPPORT=y -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -CONFIG_CRAMFS=m -CONFIG_CRAMFS_BLOCKDEV=y -# CONFIG_CRAMFS_MTD is not set -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZSTD is not set -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -CONFIG_ROMFS_BACKED_BY_BLOCK=y -# CONFIG_ROMFS_BACKED_BY_MTD is not set -# CONFIG_ROMFS_BACKED_BY_BOTH is not set -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_PSTORE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=m -# CONFIG_PSTORE_LZO_COMPRESS is not set -# CONFIG_PSTORE_LZ4_COMPRESS is not set -# CONFIG_PSTORE_LZ4HC_COMPRESS is not set -# CONFIG_PSTORE_842_COMPRESS is not set -# CONFIG_PSTORE_ZSTD_COMPRESS is not set -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -# CONFIG_PSTORE_CONSOLE is not set -# CONFIG_PSTORE_PMSG is not set -# CONFIG_PSTORE_FTRACE is not set -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -CONFIG_NFS_V4_1_MIGRATION=y -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -# CONFIG_NFSD_BLOCKLAYOUT is not set -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_ACL=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set -# CONFIG_UNICODE is not set -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_PERSISTENT_KEYRINGS=y -CONFIG_BIG_KEYS=y -CONFIG_TRUSTED_KEYS=y -CONFIG_ENCRYPTED_KEYS=y -CONFIG_KEY_DH_OPERATIONS=y -# CONFIG_SECURITY_DMESG_RESTRICT is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_WRITABLE_HOOKS=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_PAGE_TABLE_ISOLATION=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_INTEL_TXT=y -CONFIG_LSM_MMAP_MIN_ADDR=0 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -CONFIG_FORTIFY_SOURCE=y -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 -CONFIG_SECURITY_SMACK=y -# CONFIG_SECURITY_SMACK_BRINGUP is not set -CONFIG_SECURITY_SMACK_NETFILTER=y -# CONFIG_SECURITY_SMACK_APPEND_SIGNALS is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -CONFIG_IMA=y -CONFIG_IMA_MEASURE_PCR_IDX=10 -CONFIG_IMA_LSM_RULES=y -# CONFIG_IMA_TEMPLATE is not set -CONFIG_IMA_NG_TEMPLATE=y -# CONFIG_IMA_SIG_TEMPLATE is not set -CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" -CONFIG_IMA_DEFAULT_HASH_SHA1=y -# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set -CONFIG_IMA_DEFAULT_HASH="sha1" -# CONFIG_IMA_WRITE_POLICY is not set -# CONFIG_IMA_READ_POLICY is not set -CONFIG_IMA_APPRAISE=y -# CONFIG_IMA_ARCH_POLICY is not set -# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set -CONFIG_IMA_APPRAISE_BOOTPARAM=y -CONFIG_IMA_TRUSTED_KEYRING=y -CONFIG_IMA_BLACKLIST_KEYRING=y -# CONFIG_IMA_LOAD_X509 is not set -CONFIG_EVM=y -CONFIG_EVM_ATTR_FSUUID=y -CONFIG_EVM_EXTRA_SMACK_XATTRS=y -# CONFIG_EVM_ADD_XATTRS is not set -# CONFIG_EVM_LOAD_X509 is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_SMACK is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# -CONFIG_GCC_PLUGIN_STRUCTLEAK=y - -# -# Memory initialization -# -# CONFIG_INIT_STACK_NONE is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set -CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y -# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set -CONFIG_GCC_PLUGIN_STACKLEAK=y -CONFIG_STACKLEAK_TRACK_MIN_SIZE=100 -# CONFIG_STACKLEAK_METRICS is not set -CONFIG_STACKLEAK_RUNTIME_DISABLE=y -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_GLUE_HELPER_X86=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_DH=y -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS1280=m -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_KEYWRAP=m -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_ADIANTUM=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32C_INTEL=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRC32_PCLMUL=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_SM3=m -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_AES_586=m -CONFIG_CRYPTO_AES_NI_INTEL=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SERPENT_SSE2_586=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_TWOFISH_586=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_HASH=y -CONFIG_CRYPTO_DRBG_CTR=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_PADLOCK=y -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_GEODE=m -CONFIG_CRYPTO_DEV_CCP=y -CONFIG_CRYPTO_DEV_CCP_DD=m -CONFIG_CRYPTO_DEV_SP_CCP=y -CONFIG_CRYPTO_DEV_CCP_CRYPTO=m -CONFIG_CRYPTO_DEV_QAT=m -CONFIG_CRYPTO_DEV_QAT_DH895xCC=m -CONFIG_CRYPTO_DEV_QAT_C3XXX=m -CONFIG_CRYPTO_DEV_QAT_C62X=m -CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m -CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m -CONFIG_CRYPTO_DEV_QAT_C62XVF=m -CONFIG_CRYPTO_DEV_CHELSIO=m -# CONFIG_CHELSIO_IPSEC_INLINE is not set -# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set -CONFIG_CRYPTO_DEV_VIRTIO=m -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_TPM_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_TEST=m -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_BCH=m -CONFIG_BCH_CONST_PARAMS=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_XARRAY_MULTI=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -# CONFIG_DMA_CMA is not set -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_DDR=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_FONT_SUPPORT=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_SG_POOL=y -CONFIG_ARCH_STACKWALK=y -CONFIG_SBITMAP=y -CONFIG_PARMAN=m -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -CONFIG_OBJAGG=m - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_READABLE_ASM is not set -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_OPTIMIZE_INLINING=y -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -CONFIG_PAGE_EXTENSION=y -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_OWNER is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -CONFIG_CC_HAS_KASAN_GENERIC=y -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HARDLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# end of Debug Lockups and Hangs - -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_LOCK_TORTURE_TEST=m -CONFIG_WW_MUTEX_SELFTEST=m -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -CONFIG_TORTURE_TEST=m -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m -CONFIG_FUNCTION_ERROR_INJECTION=y -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_FENTRY=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -CONFIG_SCHED_TRACER=y -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -CONFIG_STACK_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set -# CONFIG_UPROBE_EVENTS is not set -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_FUNCTION_PROFILER=y -# CONFIG_BPF_KPROBE_OVERRIDE is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -CONFIG_MMIOTRACE=y -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_MMIOTRACE_TEST is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -CONFIG_RBTREE_TEST=m -CONFIG_INTERVAL_TREE_TEST=m -CONFIG_PERCPU_TEST=m -# CONFIG_ATOMIC64_SELFTEST is not set -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_TEST_HEXDUMP=m -CONFIG_TEST_STRING_HELPERS=m -CONFIG_TEST_STRSCPY=m -CONFIG_TEST_KSTRTOX=m -CONFIG_TEST_PRINTF=m -CONFIG_TEST_BITMAP=m -CONFIG_TEST_BITFIELD=m -CONFIG_TEST_UUID=m -CONFIG_TEST_XARRAY=m -CONFIG_TEST_OVERFLOW=m -CONFIG_TEST_RHASHTABLE=m -CONFIG_TEST_HASH=m -CONFIG_TEST_IDA=m -CONFIG_TEST_PARMAN=m -CONFIG_TEST_LKM=m -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_FIND_BIT_BENCHMARK=m -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -CONFIG_TEST_UDELAY=m -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -CONFIG_TEST_OBJAGG=m -# CONFIG_TEST_STACKINIT is not set -CONFIG_MEMTEST=y -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_KGDB=y -CONFIG_KGDB_SERIAL_CONSOLE=y -# CONFIG_KGDB_TESTS is not set -CONFIG_KGDB_LOW_LEVEL_TRAP=y -CONFIG_KGDB_KDB=y -CONFIG_KDB_DEFAULT_ENABLE=0x1 -CONFIG_KDB_KEYBOARD=y -CONFIG_KDB_CONTINUE_CATASTROPHIC=0 -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_UBSAN is not set -CONFIG_UBSAN_ALIGNMENT=y -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_EARLY_PRINTK_USB=y -# CONFIG_X86_VERBOSE_BOOTUP is not set -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_DBGP=y -# CONFIG_EARLY_PRINTK_USB_XDBC is not set -# CONFIG_X86_PTDUMP is not set -# CONFIG_EFI_PGT_DUMP is not set -# CONFIG_DEBUG_WX is not set -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -CONFIG_IO_DELAY_TYPE_0X80=0 -CONFIG_IO_DELAY_TYPE_0XED=1 -CONFIG_IO_DELAY_TYPE_UDELAY=2 -CONFIG_IO_DELAY_TYPE_NONE=3 -# CONFIG_IO_DELAY_0X80 is not set -CONFIG_IO_DELAY_0XED=y -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_DEFAULT_IO_DELAY_TYPE=1 -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_CPA_DEBUG is not set -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -CONFIG_X86_DEBUG_FPU=y -CONFIG_PUNIT_ATOM_DEBUG=m -CONFIG_UNWINDER_FRAME_POINTER=y -# CONFIG_UNWINDER_GUESS is not set -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.2-x86_64.conf b/gnu/packages/aux-files/linux-libre/5.2-x86_64.conf deleted file mode 100644 index e1d2c93f9a..0000000000 --- a/gnu/packages/aux-files/linux-libre/5.2-x86_64.conf +++ /dev/null @@ -1,10120 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/x86 5.2.0-gnu Kernel Configuration -# - -# -# Compiler: gcc (GCC) 7.4.0 -# -CONFIG_CC_IS_GCC=y -CONFIG_GCC_VERSION=70400 -CONFIG_CLANG_VERSION=0 -CONFIG_CC_HAS_ASM_GOTO=y -CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y -CONFIG_THREAD_INFO_IN_TASK=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_BUILD_SALT="" -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_BZIP2 is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_XZ is not set -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_USELIB=y -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y -CONFIG_GENERIC_IRQ_RESERVATION_MODE=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -# CONFIG_GENERIC_IRQ_DEBUGFS is not set -# end of IRQ subsystem - -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_CLOCKSOURCE_INIT=y -CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y -CONFIG_GENERIC_CMOS_UPDATE=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -# end of Timers subsystem - -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_PSI=y -# CONFIG_PSI_DEFAULT_DISABLED is not set -# end of CPU/Task time and stats accounting - -CONFIG_CPU_ISOLATION=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -CONFIG_TREE_SRCU=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RCU_NEED_SEGCBLIST=y -# end of RCU Subsystem - -CONFIG_BUILD_BIN2C=y -# CONFIG_IKCONFIG is not set -# CONFIG_IKHEADERS is not set -CONFIG_LOG_BUF_SHIFT=18 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y -CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y -CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y -CONFIG_ARCH_SUPPORTS_INT128=y -CONFIG_NUMA_BALANCING=y -CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y -CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_CGROUP_PIDS=y -# CONFIG_CGROUP_RDMA is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_HUGETLB=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_SOCK_CGROUP_DATA=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -CONFIG_CHECKPOINT_RESTORE=y -CONFIG_SCHED_AUTOGROUP=y -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -CONFIG_SGETMASK_SYSCALL=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_FHANDLE=y -CONFIG_POSIX_TIMERS=y -CONFIG_PRINTK=y -CONFIG_PRINTK_NMI=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_FUTEX_PI=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_IO_URING=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_MEMBARRIER=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y -CONFIG_KALLSYMS_BASE_RELATIVE=y -CONFIG_BPF_SYSCALL=y -CONFIG_USERFAULTFD=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_RSEQ=y -# CONFIG_DEBUG_RSEQ is not set -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -# CONFIG_PC104 is not set - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -# end of Kernel Performance Events And Counters - -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLAB_MERGE_DEFAULT=y -CONFIG_SLAB_FREELIST_RANDOM=y -CONFIG_SLAB_FREELIST_HARDENED=y -CONFIG_SHUFFLE_PAGE_ALLOCATOR=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SYSTEM_DATA_VERIFICATION=y -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# end of General setup - -CONFIG_64BIT=y -CONFIG_X86_64=y -CONFIG_X86=y -CONFIG_INSTRUCTION_DECODER=y -CONFIG_OUTPUT_FORMAT="elf64-x86-64" -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_MMU=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=28 -CONFIG_ARCH_MMAP_RND_BITS_MAX=32 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_FILTER_PGPROT=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ZONE_DMA32=y -CONFIG_AUDIT_ARCH=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_HAVE_INTEL_TXT=y -CONFIG_X86_64_SMP=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=4 -CONFIG_CC_HAS_SANE_STACKPROTECTOR=y - -# -# Processor type and features -# -# CONFIG_ZONE_DMA is not set -CONFIG_SMP=y -CONFIG_X86_FEATURE_NAMES=y -CONFIG_X86_X2APIC=y -CONFIG_X86_MPPARSE=y -# CONFIG_GOLDFISH is not set -CONFIG_RETPOLINE=y -# CONFIG_X86_CPU_RESCTRL is not set -CONFIG_X86_EXTENDED_PLATFORM=y -CONFIG_X86_NUMACHIP=y -# CONFIG_X86_VSMP is not set -# CONFIG_X86_UV is not set -# CONFIG_X86_GOLDFISH is not set -# CONFIG_X86_INTEL_MID is not set -CONFIG_X86_INTEL_LPSS=y -CONFIG_X86_AMD_PLATFORM_DEVICE=y -CONFIG_IOSF_MBI=y -CONFIG_IOSF_MBI_DEBUG=y -CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_PARAVIRT_XXL=y -# CONFIG_PARAVIRT_DEBUG is not set -CONFIG_PARAVIRT_SPINLOCKS=y -CONFIG_XEN=y -CONFIG_XEN_PV=y -CONFIG_XEN_PV_SMP=y -CONFIG_XEN_DOM0=y -CONFIG_XEN_PVHVM=y -CONFIG_XEN_PVHVM_SMP=y -CONFIG_XEN_512GB=y -CONFIG_XEN_SAVE_RESTORE=y -# CONFIG_XEN_DEBUG_FS is not set -CONFIG_XEN_PVH=y -CONFIG_KVM_GUEST=y -CONFIG_PVH=y -CONFIG_KVM_DEBUG_FS=y -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_PARAVIRT_CLOCK=y -CONFIG_JAILHOUSE_GUEST=y -# CONFIG_MK8 is not set -# CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -# CONFIG_MATOM is not set -CONFIG_GENERIC_CPU=y -CONFIG_X86_INTERNODE_CACHE_SHIFT=6 -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_TSC=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=64 -CONFIG_X86_DEBUGCTLMSR=y -CONFIG_PROCESSOR_SELECT=y -CONFIG_CPU_SUP_INTEL=y -CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_HYGON=y -CONFIG_CPU_SUP_CENTAUR=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_DMI=y -CONFIG_GART_IOMMU=y -CONFIG_CALGARY_IOMMU=y -CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y -# CONFIG_MAXSMP is not set -CONFIG_NR_CPUS_RANGE_BEGIN=2 -CONFIG_NR_CPUS_RANGE_END=512 -CONFIG_NR_CPUS_DEFAULT=64 -CONFIG_NR_CPUS=256 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -CONFIG_SCHED_MC_PRIO=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y -CONFIG_X86_MCE=y -# CONFIG_X86_MCELOG_LEGACY is not set -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -CONFIG_X86_MCE_THRESHOLD=y -# CONFIG_X86_MCE_INJECT is not set -CONFIG_X86_THERMAL_VECTOR=y - -# -# Performance monitoring -# -CONFIG_PERF_EVENTS_INTEL_UNCORE=y -CONFIG_PERF_EVENTS_INTEL_RAPL=y -CONFIG_PERF_EVENTS_INTEL_CSTATE=y -CONFIG_PERF_EVENTS_AMD_POWER=m -# end of Performance monitoring - -CONFIG_X86_16BIT=y -CONFIG_X86_ESPFIX64=y -CONFIG_X86_VSYSCALL_EMULATION=y -CONFIG_I8K=m -CONFIG_MICROCODE=y -CONFIG_MICROCODE_INTEL=y -CONFIG_MICROCODE_AMD=y -CONFIG_MICROCODE_OLD_INTERFACE=y -CONFIG_X86_MSR=m -CONFIG_X86_CPUID=m -# CONFIG_X86_5LEVEL is not set -CONFIG_X86_DIRECT_GBPAGES=y -# CONFIG_X86_CPA_STATISTICS is not set -CONFIG_ARCH_HAS_MEM_ENCRYPT=y -# CONFIG_AMD_MEM_ENCRYPT is not set -CONFIG_NUMA=y -CONFIG_AMD_NUMA=y -CONFIG_X86_64_ACPI_NUMA=y -CONFIG_NODES_SPAN_OTHER_NODES=y -# CONFIG_NUMA_EMU is not set -CONFIG_NODES_SHIFT=6 -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_MEMORY_PROBE=y -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_X86_PMEM_LEGACY_DEVICE=y -CONFIG_X86_PMEM_LEGACY=y -CONFIG_X86_CHECK_BIOS_CORRUPTION=y -CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y -CONFIG_X86_RESERVE_LOW=64 -CONFIG_MTRR=y -CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 -CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -CONFIG_X86_PAT=y -CONFIG_ARCH_USES_PG_UNCACHED=y -CONFIG_ARCH_RANDOM=y -CONFIG_X86_SMAP=y -CONFIG_X86_INTEL_UMIP=y -CONFIG_X86_INTEL_MPX=y -CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y -CONFIG_EFI=y -CONFIG_EFI_STUB=y -CONFIG_EFI_MIXED=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_KEXEC=y -CONFIG_KEXEC_FILE=y -CONFIG_ARCH_HAS_KEXEC_PURGATORY=y -CONFIG_KEXEC_VERIFY_SIG=y -CONFIG_CRASH_DUMP=y -CONFIG_KEXEC_JUMP=y -CONFIG_PHYSICAL_START=0x1000000 -CONFIG_RELOCATABLE=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_X86_NEED_RELOCS=y -CONFIG_PHYSICAL_ALIGN=0x1000000 -CONFIG_DYNAMIC_MEMORY_LAYOUT=y -CONFIG_RANDOMIZE_MEMORY=y -CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa -CONFIG_HOTPLUG_CPU=y -# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set -# CONFIG_DEBUG_HOTPLUG_CPU0 is not set -# CONFIG_COMPAT_VDSO is not set -CONFIG_LEGACY_VSYSCALL_EMULATE=y -# CONFIG_LEGACY_VSYSCALL_NONE is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_MODIFY_LDT_SYSCALL=y -CONFIG_HAVE_LIVEPATCH=y -CONFIG_LIVEPATCH=y -# end of Processor type and features - -CONFIG_ARCH_HAS_ADD_PAGES=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_USE_PERCPU_NUMA_NODE_ID=y -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y -CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y -CONFIG_ARCH_ENABLE_THP_MIGRATION=y - -# -# Power management and ACPI options -# -CONFIG_ARCH_HIBERNATION_HEADER=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -CONFIG_PM_WAKELOCKS=y -CONFIG_PM_WAKELOCKS_LIMIT=100 -CONFIG_PM_WAKELOCKS_GC=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_DPM_WATCHDOG is not set -CONFIG_PM_TRACE=y -CONFIG_PM_TRACE_RTC=y -CONFIG_PM_CLK=y -CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y -# CONFIG_ENERGY_MODEL is not set -CONFIG_ARCH_SUPPORTS_ACPI=y -CONFIG_ACPI=y -CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y -CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y -CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SPCR_TABLE=y -CONFIG_ACPI_LPIT=y -CONFIG_ACPI_SLEEP=y -# CONFIG_ACPI_PROCFS_POWER is not set -CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y -CONFIG_ACPI_EC_DEBUGFS=m -CONFIG_ACPI_AC=y -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_FAN=y -CONFIG_ACPI_TAD=m -CONFIG_ACPI_DOCK=y -CONFIG_ACPI_CPU_FREQ_PSS=y -CONFIG_ACPI_PROCESSOR_CSTATE=y -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_CPPC_LIB=y -CONFIG_ACPI_PROCESSOR=y -CONFIG_ACPI_IPMI=m -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_PROCESSOR_AGGREGATOR=m -CONFIG_ACPI_THERMAL=y -CONFIG_ACPI_NUMA=y -CONFIG_ACPI_CUSTOM_DSDT_FILE="" -CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y -CONFIG_ACPI_TABLE_UPGRADE=y -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_PCI_SLOT=y -CONFIG_ACPI_CONTAINER=y -CONFIG_ACPI_HOTPLUG_MEMORY=y -CONFIG_ACPI_HOTPLUG_IOAPIC=y -CONFIG_ACPI_SBS=m -CONFIG_ACPI_HED=y -# CONFIG_ACPI_CUSTOM_METHOD is not set -CONFIG_ACPI_BGRT=y -# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set -CONFIG_ACPI_NFIT=m -# CONFIG_NFIT_SECURITY_DEBUG is not set -CONFIG_ACPI_HMAT=y -CONFIG_HAVE_ACPI_APEI=y -CONFIG_HAVE_ACPI_APEI_NMI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y -CONFIG_ACPI_APEI_MEMORY_FAILURE=y -CONFIG_ACPI_APEI_EINJ=m -# CONFIG_ACPI_APEI_ERST_DEBUG is not set -CONFIG_DPTF_POWER=m -CONFIG_ACPI_WATCHDOG=y -CONFIG_ACPI_EXTLOG=m -CONFIG_ACPI_ADXL=y -# CONFIG_PMIC_OPREGION is not set -CONFIG_ACPI_CONFIGFS=m -CONFIG_X86_PM_TIMER=y -CONFIG_SFI=y - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_X86_INTEL_PSTATE=y -CONFIG_X86_PCC_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ=y -CONFIG_X86_ACPI_CPUFREQ_CPB=y -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_AMD_FREQ_SENSITIVITY=m -CONFIG_X86_SPEEDSTEP_CENTRINO=y -CONFIG_X86_P4_CLOCKMOD=m - -# -# shared options -# -CONFIG_X86_SPEEDSTEP_LIB=m -# end of CPU Frequency scaling - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_GOV_TEO=y -# end of CPU Idle - -CONFIG_INTEL_IDLE=y -# end of Power management and ACPI options - -# -# Bus options (PCI etc.) -# -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_XEN=y -CONFIG_MMCONF_FAM10H=y -# CONFIG_PCI_CNB20LE_QUIRK is not set -# CONFIG_ISA_BUS is not set -CONFIG_ISA_DMA_API=y -CONFIG_AMD_NB=y -# CONFIG_X86_SYSFB is not set -# end of Bus options (PCI etc.) - -# -# Binary Emulations -# -CONFIG_IA32_EMULATION=y -CONFIG_X86_X32=y -CONFIG_COMPAT_32=y -CONFIG_COMPAT=y -CONFIG_COMPAT_FOR_U64_ALIGNMENT=y -CONFIG_SYSVIPC_COMPAT=y -# end of Binary Emulations - -CONFIG_HAVE_GENERIC_GUP=y - -# -# Firmware Drivers -# -CONFIG_EDD=y -CONFIG_EDD_OFF=y -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=m -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m -CONFIG_FW_CFG_SYSFS=m -# CONFIG_FW_CFG_SYSFS_CMDLINE is not set -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=y -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set -CONFIG_EFI_RUNTIME_MAP=y -# CONFIG_EFI_FAKE_MEMMAP is not set -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_EFI_BOOTLOADER_CONTROL=m -# CONFIG_EFI_CAPSULE_LOADER is not set -# CONFIG_EFI_TEST is not set -CONFIG_APPLE_PROPERTIES=y -CONFIG_RESET_ATTACK_MITIGATION=y -# end of EFI (Extensible Firmware Interface) Support - -CONFIG_UEFI_CPER=y -CONFIG_UEFI_CPER_X86=y -CONFIG_EFI_DEV_PATH_PARSER=y -CONFIG_EFI_EARLYCON=y - -# -# Tegra firmware driver -# -# end of Tegra firmware driver -# end of Firmware Drivers - -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_ASYNC_PF=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_KVM_COMPAT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -CONFIG_KVM_AMD_SEV=y -# CONFIG_KVM_MMU_AUDIT is not set -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_VSOCK=m -CONFIG_VHOST=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# -# General architecture-dependent options -# -CONFIG_CRASH_CORE=y -CONFIG_KEXEC_CORE=y -CONFIG_HOTPLUG_SMT=y -CONFIG_OPROFILE=m -# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_OPROFILE_NMI_TIMER=y -CONFIG_KPROBES=y -CONFIG_JUMP_LABEL=y -# CONFIG_STATIC_KEYS_SELFTEST is not set -CONFIG_OPTPROBES=y -CONFIG_KPROBES_ON_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_KRETPROBES=y -CONFIG_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SET_DIRECT_MAP=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y -CONFIG_HAVE_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_PERF_EVENTS_NMI=y -CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y -CONFIG_HAVE_RCU_TABLE_FREE=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_STACKLEAK=y -CONFIG_HAVE_STACKPROTECTOR=y -CONFIG_CC_HAS_STACKPROTECTOR_NONE=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOVE_PMD=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_ARCH_SOFT_DIRTY=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS=28 -CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y -CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 -CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_STACK_VALIDATION=y -CONFIG_HAVE_RELIABLE_STACKTRACE=y -CONFIG_ISA_BUS_API=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_COMPAT_OLD_SIGACTION=y -CONFIG_64BIT_TIME=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_HAVE_ARCH_VMAP_STACK=y -CONFIG_VMAP_STACK=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAS_REFCOUNT=y -CONFIG_REFCOUNT_FULL=y -CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y -CONFIG_ARCH_USE_MEMREMAP_PROT=y -# CONFIG_LOCK_EVENT_COUNTS is not set - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# end of GCOV-based kernel profiling - -CONFIG_PLUGIN_HOSTCC="g++" -CONFIG_HAVE_GCC_PLUGINS=y -CONFIG_GCC_PLUGINS=y - -# -# GCC plugins -# -# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set -# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set -# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set -# end of GCC plugins -# end of General architecture-dependent options - -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_ZONED=y -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -CONFIG_BLK_CMDLINE_PARSER=y -CONFIG_BLK_WBT=y -# CONFIG_BLK_CGROUP_IOLATENCY is not set -CONFIG_BLK_WBT_MQ=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_DEBUG_FS_ZONED=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -CONFIG_AIX_PARTITION=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -# CONFIG_LDM_DEBUG is not set -CONFIG_SGI_PARTITION=y -CONFIG_ULTRIX_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -CONFIG_SYSV68_PARTITION=y -CONFIG_CMDLINE_PARTITION=y -# end of Partition Types - -CONFIG_BLOCK_COMPAT=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_MQ_VIRTIO=y -CONFIG_BLK_MQ_RDMA=y -CONFIG_BLK_PM=y - -# -# IO Schedulers -# -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=m -CONFIG_IOSCHED_BFQ=m -# CONFIG_BFQ_GROUP_IOSCHED is not set -# end of IO Schedulers - -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y -CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y -CONFIG_FREEZER=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -CONFIG_COMPAT_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -# end of Executable file formats - -# -# Memory Management options -# -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_HAVE_BOOTMEM_INFO_NODE=y -CONFIG_MEMORY_HOTPLUG=y -CONFIG_MEMORY_HOTPLUG_SPARSE=y -# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set -CONFIG_MEMORY_HOTREMOVE=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_CONTIG_ALLOC=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_VIRT_TO_BUS=y -CONFIG_MMU_NOTIFIER=y -CONFIG_KSM=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -CONFIG_MEMORY_FAILURE=y -CONFIG_HWPOISON_INJECT=m -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_ARCH_WANTS_THP_SWAP=y -CONFIG_THP_SWAP=y -CONFIG_TRANSPARENT_HUGE_PAGECACHE=y -CONFIG_CLEANCACHE=y -CONFIG_FRONTSWAP=y -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -CONFIG_MEM_SOFT_DIRTY=y -CONFIG_ZSWAP=y -CONFIG_ZPOOL=y -CONFIG_ZBUD=y -CONFIG_Z3FOLD=m -CONFIG_ZSMALLOC=y -CONFIG_PGTABLE_MAPPING=y -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set -CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_ARCH_HAS_ZONE_DEVICE=y -CONFIG_ZONE_DEVICE=y -CONFIG_ARCH_HAS_HMM_MIRROR=y -CONFIG_ARCH_HAS_HMM_DEVICE=y -CONFIG_ARCH_HAS_HMM=y -CONFIG_DEV_PAGEMAP_OPS=y -# CONFIG_HMM_MIRROR is not set -# CONFIG_DEVICE_PRIVATE is not set -# CONFIG_DEVICE_PUBLIC is not set -CONFIG_FRAME_VECTOR=y -CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y -CONFIG_ARCH_HAS_PKEYS=y -# CONFIG_PERCPU_STATS is not set -# CONFIG_GUP_BENCHMARK is not set -CONFIG_ARCH_HAS_PTE_SPECIAL=y -# end of Memory Management options - -CONFIG_NET=y -CONFIG_COMPAT_NETLINK_MESSAGES=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y -CONFIG_SKB_EXTENSIONS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_SCM=y -CONFIG_UNIX_DIAG=m -CONFIG_TLS=m -# CONFIG_TLS_DEVICE is not set -CONFIG_XFRM=y -CONFIG_XFRM_OFFLOAD=y -CONFIG_XFRM_ALGO=m -CONFIG_XFRM_USER=m -CONFIG_XFRM_INTERFACE=m -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -CONFIG_XFRM_STATISTICS=y -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -# CONFIG_SMC is not set -# CONFIG_XDP_SOCKETS is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE_COMMON=y -CONFIG_IP_MROUTE=y -# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_ESP_OFFLOAD=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -CONFIG_INET_RAW_DIAG=m -# CONFIG_INET_DIAG_DESTROY is not set -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_ESP_OFFLOAD=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -# CONFIG_IPV6_SEG6_LWTUNNEL is not set -# CONFIG_IPV6_SEG6_HMAC is not set -CONFIG_NETLABEL=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_BRIDGE=y -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NETFILTER_NETLINK_OSF=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_LOG_NETDEV=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NF_NAT_MASQUERADE=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_SET=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_FLOW_OFFLOAD=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_CONNLIMIT=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_TUNNEL=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NFT_XFRM=m -CONFIG_NFT_SOCKET=m -CONFIG_NFT_OSF=m -CONFIG_NFT_TPROXY=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NFT_FIB_NETDEV=m -CONFIG_NF_FLOW_TABLE_INET=m -CONFIG_NF_FLOW_TABLE=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -# end of Core Netfilter Configuration - -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_MH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS MH scheduler -# -CONFIG_IP_VS_MH_TAB_INDEX=12 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TPROXY_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_FLOW_TABLE_IPV4=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -# end of IP: Netfilter Configuration - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TPROXY_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_FLOW_TABLE_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_SRH=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -# end of IPv6: Netfilter Configuration - -CONFIG_NF_DEFRAG_IPV6=m - -# -# DECnet: Netfilter Configuration -# -CONFIG_DECNET_NF_GRABULATOR=m -# end of DECnet: Netfilter Configuration - -CONFIG_NF_TABLES_BRIDGE=y -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -# CONFIG_BPFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -# CONFIG_IP_DCCP_CCID3 is not set -# end of DCCP CCIDs Configuration - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# end of DCCP Kernel Hacking - -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_TIPC_DIAG=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_TAG_8021Q=m -CONFIG_NET_DSA_TAG_BRCM_COMMON=m -CONFIG_NET_DSA_TAG_BRCM=m -CONFIG_NET_DSA_TAG_BRCM_PREPEND=m -CONFIG_NET_DSA_TAG_GSWIP=m -CONFIG_NET_DSA_TAG_DSA=m -CONFIG_NET_DSA_TAG_EDSA=m -CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m -CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m -CONFIG_NET_DSA_TAG_QCA=m -CONFIG_NET_DSA_TAG_LAN9303=m -CONFIG_NET_DSA_TAG_SJA1105=m -CONFIG_NET_DSA_TAG_TRAILER=m -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_PHONET=m -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_CBS=m -CONFIG_NET_SCH_ETF=m -CONFIG_NET_SCH_TAPRIO=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_SKBPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_CAKE=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_EMATCH_IPT=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_SAMPLE=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_SCH_FIFO=y -CONFIG_DCB=y -CONFIG_DNS_RESOLVER=y -CONFIG_BATMAN_ADV=m -# CONFIG_BATMAN_ADV_BATMAN_V is not set -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_BATMAN_ADV_SYSFS=y -# CONFIG_BATMAN_ADV_TRACING is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VSOCKETS_DIAG=m -CONFIG_VMWARE_VMCI_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS=m -CONFIG_VIRTIO_VSOCKETS_COMMON=m -CONFIG_HYPERV_VSOCKETS=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=m -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_NET_NSH=m -CONFIG_HSR=m -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_L3_MASTER_DEV=y -CONFIG_NET_NCSI=y -# CONFIG_NCSI_OEM_CMD_GET_MAC is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -# CONFIG_BPF_JIT is not set -# CONFIG_BPF_STREAM_PARSER is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_NET_DROP_MONITOR is not set -# end of Network testing -# end of Networking options - -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -CONFIG_AX25_DAMA_SLAVE=y -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_YAM=m -# end of AX.25 network device drivers - -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -CONFIG_CAN_VXCAN=m -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_JANZ_ICAN3=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_CAN_C_CAN_PCI=m -CONFIG_CAN_CC770=m -CONFIG_CAN_CC770_ISA=m -CONFIG_CAN_CC770_PLATFORM=m -CONFIG_CAN_IFI_CANFD=m -CONFIG_CAN_M_CAN=m -CONFIG_CAN_PEAK_PCIEFD=m -CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_EMS_PCMCIA=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCMCIA=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_SOFTING=m -CONFIG_CAN_SOFTING_CS=m - -# -# CAN SPI interfaces -# -CONFIG_CAN_HI311X=m -CONFIG_CAN_MCP251X=m -# end of CAN SPI interfaces - -# -# CAN USB interfaces -# -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_MCBA_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_UCAN=m -# end of CAN USB interfaces - -# CONFIG_CAN_DEBUG_DEVICES is not set -# end of CAN Device Drivers - -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -# CONFIG_BT_LEDS is not set -# CONFIG_BT_SELFTEST is not set -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_SERDEV=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_NOKIA=m -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_BT_HCIUART_RTL=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_WILINK=m -CONFIG_BT_MTKSDIO=m -CONFIG_BT_MTKUART=m -CONFIG_BT_HCIRSI=m -# end of Bluetooth device drivers - -CONFIG_AF_RXRPC=m -CONFIG_AF_RXRPC_IPV6=y -# CONFIG_AF_RXRPC_INJECT_LOSS is not set -# CONFIG_AF_RXRPC_DEBUG is not set -# CONFIG_RXKAD is not set -CONFIG_AF_KCM=m -CONFIG_STREAM_PARSER=y -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y -CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y -CONFIG_CFG80211_DEFAULT_PS=y -CONFIG_CFG80211_DEBUGFS=y -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -CONFIG_MAC80211_DEBUGFS=y -CONFIG_MAC80211_MESSAGE_TRACING=y -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=y -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -CONFIG_RFKILL_GPIO=m -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -CONFIG_NET_9P_XEN=m -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -CONFIG_CAIF=m -# CONFIG_CAIF_DEBUG is not set -CONFIG_CAIF_NETDEV=m -CONFIG_CAIF_USB=m -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -CONFIG_NFC_NCI=m -CONFIG_NFC_NCI_SPI=m -CONFIG_NFC_NCI_UART=m -CONFIG_NFC_HCI=m -CONFIG_NFC_SHDLC=y - -# -# Near Field Communication (NFC) devices -# -CONFIG_NFC_TRF7970A=m -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -CONFIG_NFC_FDP=m -CONFIG_NFC_FDP_I2C=m -CONFIG_NFC_PN544=m -CONFIG_NFC_PN544_I2C=m -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -CONFIG_NFC_PN533_I2C=m -CONFIG_NFC_MICROREAD=m -CONFIG_NFC_MICROREAD_I2C=m -CONFIG_NFC_MRVL=m -CONFIG_NFC_MRVL_USB=m -CONFIG_NFC_MRVL_UART=m -CONFIG_NFC_MRVL_I2C=m -CONFIG_NFC_MRVL_SPI=m -CONFIG_NFC_ST21NFCA=m -CONFIG_NFC_ST21NFCA_I2C=m -CONFIG_NFC_ST_NCI=m -CONFIG_NFC_ST_NCI_I2C=m -CONFIG_NFC_ST_NCI_SPI=m -CONFIG_NFC_NXP_NCI=m -CONFIG_NFC_NXP_NCI_I2C=m -CONFIG_NFC_S3FWRN5=m -CONFIG_NFC_S3FWRN5_I2C=m -CONFIG_NFC_ST95HF=m -# end of Near Field Communication (NFC) devices - -CONFIG_PSAMPLE=m -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y -CONFIG_DST_CACHE=y -CONFIG_GRO_CELLS=y -CONFIG_NET_SOCK_MSG=y -CONFIG_NET_DEVLINK=y -CONFIG_PAGE_POOL=y -CONFIG_FAILOVER=y -CONFIG_HAVE_EBPF_JIT=y - -# -# Device Drivers -# -CONFIG_HAVE_EISA=y -# CONFIG_EISA is not set -CONFIG_HAVE_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -# CONFIG_PCIEAER_INJECT is not set -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEBUG=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCIE_DPC=y -CONFIG_PCIE_PTM=y -# CONFIG_PCIE_BW is not set -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_QUIRKS=y -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_REALLOC_ENABLE_AUTO=y -CONFIG_PCI_STUB=m -# CONFIG_PCI_PF_STUB is not set -CONFIG_XEN_PCIDEV_FRONTEND=m -CONFIG_PCI_ATS=y -CONFIG_PCI_LOCKLESS_CONFIG=y -CONFIG_PCI_IOV=y -CONFIG_PCI_PRI=y -CONFIG_PCI_PASID=y -# CONFIG_PCI_P2PDMA is not set -CONFIG_PCI_LABEL=y -CONFIG_PCI_HYPERV=m -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -CONFIG_HOTPLUG_PCI_CPCI=y -CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m -CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m -CONFIG_HOTPLUG_PCI_SHPC=y - -# -# PCI controller drivers -# - -# -# Cadence PCIe controllers support -# -# end of Cadence PCIe controllers support - -# CONFIG_VMD is not set - -# -# DesignWare PCI Core Support -# -# CONFIG_PCIE_DW_PLAT_HOST is not set -# CONFIG_PCI_MESON is not set -# end of DesignWare PCI Core Support -# end of PCI controller drivers - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# end of PCI Endpoint - -# -# PCI switch controller drivers -# -CONFIG_PCI_SW_SWITCHTEC=m -# end of PCI switch controller drivers - -CONFIG_PCCARD=m -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_PCCARD_NONSTATIC=y -CONFIG_RAPIDIO=y -CONFIG_RAPIDIO_TSI721=m -CONFIG_RAPIDIO_DISC_TIMEOUT=30 -# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set -CONFIG_RAPIDIO_DMA_ENGINE=y -# CONFIG_RAPIDIO_DEBUG is not set -CONFIG_RAPIDIO_ENUM_BASIC=m -CONFIG_RAPIDIO_CHMAN=m -CONFIG_RAPIDIO_MPORT_CDEV=m - -# -# RapidIO Switch drivers -# -CONFIG_RAPIDIO_TSI57X=m -CONFIG_RAPIDIO_CPS_XX=m -CONFIG_RAPIDIO_TSI568=m -CONFIG_RAPIDIO_CPS_GEN2=m -CONFIG_RAPIDIO_RXS_GEN3=m -# end of RapidIO Switch drivers - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y - -# -# Firmware loader -# -CONFIG_FW_LOADER=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -# end of Firmware loader - -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set -CONFIG_HMEM_REPORTING=y -# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -CONFIG_SYS_HYPERVISOR=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_SPMI=m -CONFIG_REGMAP_W1=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set -# end of Generic Driver Options - -# -# Bus devices -# -# end of Bus devices - -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_GNSS=m -CONFIG_GNSS_SERIAL=m -CONFIG_GNSS_MTK_SERIAL=m -CONFIG_GNSS_SIRF_SERIAL=m -CONFIG_GNSS_UBX_SERIAL=m -CONFIG_MTD=m -# CONFIG_MTD_TESTS is not set -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AR7_PARTS=m - -# -# Partition parsers -# -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# end of Partition parsers - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_SM_FTL=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -# end of RAM/ROM/Flash chip drivers - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set -CONFIG_MTD_SBC_GXX=m -CONFIG_MTD_AMD76XROM=m -CONFIG_MTD_ICHXROM=m -CONFIG_MTD_ESB2ROM=m -CONFIG_MTD_CK804XROM=m -CONFIG_MTD_SCB2_FLASH=m -CONFIG_MTD_NETtel=m -CONFIG_MTD_L440GX=m -CONFIG_MTD_PCI=m -CONFIG_MTD_PCMCIA=m -# CONFIG_MTD_PCMCIA_ANONYMOUS is not set -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -# end of Mapping drivers for chip access - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -# CONFIG_MTD_PMC551_BUGFIX is not set -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_DATAFLASH=m -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -CONFIG_MTD_DATAFLASH_OTP=y -CONFIG_MTD_M25P80=m -CONFIG_MTD_MCHP23K256=m -CONFIG_MTD_SST25L=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLOCK2MTD=m - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOCG3=m -CONFIG_BCH_CONST_M=14 -CONFIG_BCH_CONST_T=4 -# end of Self-contained MTD device drivers - -CONFIG_MTD_NAND_CORE=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m -# CONFIG_MTD_ONENAND_OTP is not set -CONFIG_MTD_ONENAND_2X_PROGRAM=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=m -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_RAW_NAND=m -# CONFIG_MTD_NAND_ECC_SW_BCH is not set - -# -# Raw/parallel NAND flash controllers -# -CONFIG_MTD_NAND_DENALI=m -CONFIG_MTD_NAND_DENALI_PCI=m -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_GPIO=m -CONFIG_MTD_NAND_PLATFORM=m - -# -# Misc -# -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set -CONFIG_MTD_SPI_NAND=m - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# end of LPDDR & LPDDR2 PCM memory drivers - -CONFIG_MTD_SPI_NOR=m -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_SPI_MTK_QUADSPI=m -CONFIG_SPI_INTEL_SPI=m -CONFIG_SPI_INTEL_SPI_PCI=m -CONFIG_SPI_INTEL_SPI_PLATFORM=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_OF is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_SERIAL=m -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_PC_PCMCIA=m -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -# CONFIG_PNP_DEBUG_MESSAGES is not set - -# -# Protocols -# -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_BLK_DEV_FD=m -CONFIG_CDROM=y -CONFIG_PARIDE=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_ZRAM_MEMORY_TRACKING is not set -CONFIG_BLK_DEV_UMEM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SKD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=y -CONFIG_XEN_BLKDEV_BACKEND=m -CONFIG_VIRTIO_BLK=y -# CONFIG_VIRTIO_BLK_SCSI is not set -CONFIG_BLK_DEV_RBD=m -CONFIG_BLK_DEV_RSXX=m - -# -# NVME Support -# -CONFIG_NVME_CORE=y -CONFIG_BLK_DEV_NVME=y -# CONFIG_NVME_MULTIPATH is not set -CONFIG_NVME_FABRICS=m -CONFIG_NVME_RDMA=m -CONFIG_NVME_FC=m -CONFIG_NVME_TCP=m -CONFIG_NVME_TARGET=m -CONFIG_NVME_TARGET_LOOP=m -CONFIG_NVME_TARGET_RDMA=m -CONFIG_NVME_TARGET_FC=m -CONFIG_NVME_TARGET_FCLOOP=m -CONFIG_NVME_TARGET_TCP=m -# end of NVME Support - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_AD525X_DPOT_SPI=m -CONFIG_DUMMY_IRQ=m -CONFIG_IBM_ASM=m -CONFIG_PHANTOM=m -CONFIG_SGI_IOC4=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -CONFIG_HP_ILO=m -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -CONFIG_VMWARE_BALLOON=m -CONFIG_USB_SWITCH_FSA9480=m -CONFIG_LATTICE_ECP3_CONFIG=m -CONFIG_SRAM=y -# CONFIG_PCI_ENDPOINT_TEST is not set -CONFIG_MISC_RTSX=m -CONFIG_PVPANIC=m -CONFIG_C2PORT=m -CONFIG_C2PORT_DURAMAR_2150=m - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_AT25=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -CONFIG_EEPROM_93XX46=m -CONFIG_EEPROM_IDT_89HPESX=m -CONFIG_EEPROM_EE1004=m -# end of EEPROM support - -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -# end of Texas Instruments shared transport line discipline - -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_ALTERA_STAPL=m -# CONFIG_INTEL_MEI is not set -# CONFIG_INTEL_MEI_ME is not set -# CONFIG_INTEL_MEI_TXE is not set -# CONFIG_INTEL_MEI_HDCP is not set -CONFIG_VMWARE_VMCI=m - -# -# Intel MIC & related support -# - -# -# Intel MIC Bus Driver -# -CONFIG_INTEL_MIC_BUS=m - -# -# SCIF Bus Driver -# -CONFIG_SCIF_BUS=m - -# -# VOP Bus Driver -# -CONFIG_VOP_BUS=m - -# -# Intel MIC Host Driver -# -CONFIG_INTEL_MIC_HOST=m - -# -# Intel MIC Card Driver -# -CONFIG_INTEL_MIC_CARD=m - -# -# SCIF Driver -# -CONFIG_SCIF=m - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# -CONFIG_MIC_COSM=m - -# -# VOP Driver -# -CONFIG_VOP=m -CONFIG_VHOST_RING=m -# end of Intel MIC & related support - -CONFIG_GENWQE=m -CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0 -CONFIG_ECHO=m -CONFIG_MISC_ALCOR_PCI=m -CONFIG_MISC_RTSX_PCI=m -CONFIG_MISC_RTSX_USB=m -CONFIG_HABANA_AI=m -# end of Misc devices - -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -# end of SCSI Transports - -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=5000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_ARCMSR=m -CONFIG_SCSI_ESAS2R=m -CONFIG_MEGARAID_NEWGEN=y -CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_SMARTPQI=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -# CONFIG_SCSI_UFS_DWC_TC_PCI is not set -CONFIG_SCSI_UFSHCD_PLATFORM=m -CONFIG_SCSI_UFS_CDNS_PLATFORM=m -# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set -# CONFIG_SCSI_UFS_BSG is not set -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_BUSLOGIC=m -CONFIG_SCSI_FLASHPOINT=y -CONFIG_SCSI_MYRB=m -CONFIG_SCSI_MYRS=m -CONFIG_VMWARE_PVSCSI=m -CONFIG_XEN_SCSI_FRONTEND=m -CONFIG_HYPERV_STORAGE=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_FCOE_FNIC=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_ISCI=m -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -CONFIG_SCSI_IPR=m -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -# CONFIG_TCM_QLA2XXX_DEBUG is not set -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_QEDI=m -CONFIG_QEDF=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_WD719X=m -CONFIG_SCSI_DEBUG=m -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_LOWLEVEL_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -# end of SCSI device support - -CONFIG_ATA=y -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_ACPI=y -CONFIG_SATA_ZPODD=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=m -CONFIG_SATA_MOBILE_LPM_POLICY=0 -CONFIG_SATA_AHCI_PLATFORM=m -CONFIG_SATA_INIC162X=m -CONFIG_SATA_ACARD_AHCI=m -CONFIG_SATA_SIL24=m -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=m -CONFIG_SATA_QSTOR=m -CONFIG_SATA_SX4=m -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=y -CONFIG_SATA_DWC=m -# CONFIG_SATA_DWC_OLD_DMA is not set -# CONFIG_SATA_DWC_DEBUG is not set -CONFIG_SATA_MV=m -CONFIG_SATA_NV=m -CONFIG_SATA_PROMISE=m -CONFIG_SATA_SIL=m -CONFIG_SATA_SIS=m -CONFIG_SATA_SVW=m -CONFIG_SATA_ULI=m -CONFIG_SATA_VIA=m -CONFIG_SATA_VITESSE=m - -# -# PATA SFF controllers with BMDMA -# -CONFIG_PATA_ALI=m -CONFIG_PATA_AMD=m -CONFIG_PATA_ARTOP=m -CONFIG_PATA_ATIIXP=m -CONFIG_PATA_ATP867X=m -CONFIG_PATA_CMD64X=m -CONFIG_PATA_CYPRESS=m -CONFIG_PATA_EFAR=m -CONFIG_PATA_HPT366=m -CONFIG_PATA_HPT37X=m -CONFIG_PATA_HPT3X2N=m -CONFIG_PATA_HPT3X3=m -# CONFIG_PATA_HPT3X3_DMA is not set -CONFIG_PATA_IT8213=m -CONFIG_PATA_IT821X=m -CONFIG_PATA_JMICRON=m -CONFIG_PATA_MARVELL=m -CONFIG_PATA_NETCELL=m -CONFIG_PATA_NINJA32=m -CONFIG_PATA_NS87415=m -CONFIG_PATA_OLDPIIX=m -CONFIG_PATA_OPTIDMA=m -CONFIG_PATA_PDC2027X=m -CONFIG_PATA_PDC_OLD=m -CONFIG_PATA_RADISYS=m -CONFIG_PATA_RDC=m -CONFIG_PATA_SCH=m -CONFIG_PATA_SERVERWORKS=m -CONFIG_PATA_SIL680=m -CONFIG_PATA_SIS=y -CONFIG_PATA_TOSHIBA=m -CONFIG_PATA_TRIFLEX=m -CONFIG_PATA_VIA=m -CONFIG_PATA_WINBOND=m - -# -# PIO-only SFF controllers -# -CONFIG_PATA_CMD640_PCI=m -CONFIG_PATA_MPIIX=m -CONFIG_PATA_NS87410=m -CONFIG_PATA_OPTI=m -CONFIG_PATA_PCMCIA=m -CONFIG_PATA_PLATFORM=m -CONFIG_PATA_RZ1000=m - -# -# Generic fallback / legacy drivers -# -CONFIG_PATA_ACPI=m -CONFIG_ATA_GENERIC=y -CONFIG_PATA_LEGACY=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_AUTODETECT=y -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_MD_CLUSTER=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_UNSTRIPED=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_WRITECACHE=m -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_DUST=m -# CONFIG_DM_INIT is not set -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -CONFIG_DM_INTEGRITY=m -CONFIG_DM_ZONED=m -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_ISCSI_TARGET_CXGB4=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -CONFIG_FUSION_LOGGING=y - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -# end of IEEE 1394 (FireWire) support - -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_MAC_EMUMOUSEBTN=m -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_EQUALIZER=m -CONFIG_NET_FC=y -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN_L3S=y -CONFIG_IPVLAN=m -CONFIG_IPVTAP=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_GTP=m -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_NTB_NETDEV=m -CONFIG_RIONET=m -CONFIG_RIONET_TX_SIZE=128 -CONFIG_RIONET_RX_SIZE=128 -CONFIG_TUN=y -CONFIG_TAP=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=m -CONFIG_NET_VRF=m -CONFIG_VSOCKMON=m -CONFIG_SUNGEM_PHY=m -CONFIG_ARCNET=m -CONFIG_ARCNET_1201=m -CONFIG_ARCNET_1051=m -CONFIG_ARCNET_RAW=m -CONFIG_ARCNET_CAP=m -CONFIG_ARCNET_COM90xx=m -CONFIG_ARCNET_COM90xxIO=m -CONFIG_ARCNET_RIM_I=m -CONFIG_ARCNET_COM20020=m -CONFIG_ARCNET_COM20020_PCI=m -CONFIG_ARCNET_COM20020_CS=m -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m -CONFIG_ATM_LANAI=m -CONFIG_ATM_ENI=m -# CONFIG_ATM_ENI_DEBUG is not set -# CONFIG_ATM_ENI_TUNE_BURST is not set -CONFIG_ATM_FIRESTREAM=m -CONFIG_ATM_ZATM=m -# CONFIG_ATM_ZATM_DEBUG is not set -CONFIG_ATM_NICSTAR=m -# CONFIG_ATM_NICSTAR_USE_SUNI is not set -# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set -CONFIG_ATM_IDT77252=m -# CONFIG_ATM_IDT77252_DEBUG is not set -# CONFIG_ATM_IDT77252_RCV_ALL is not set -CONFIG_ATM_IDT77252_USE_SUNI=y -CONFIG_ATM_AMBASSADOR=m -# CONFIG_ATM_AMBASSADOR_DEBUG is not set -CONFIG_ATM_HORIZON=m -# CONFIG_ATM_HORIZON_DEBUG is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_HE=m -CONFIG_ATM_HE_USE_SUNI=y -CONFIG_ATM_SOLOS=m - -# -# CAIF transport drivers -# -CONFIG_CAIF_TTY=m -CONFIG_CAIF_SPI_SLAVE=m -# CONFIG_CAIF_SPI_SYNC is not set -CONFIG_CAIF_HSI=m -CONFIG_CAIF_VIRTIO=m - -# -# Distributed Switch Architecture drivers -# -CONFIG_B53=m -CONFIG_B53_SPI_DRIVER=m -CONFIG_B53_MDIO_DRIVER=m -CONFIG_B53_MMAP_DRIVER=m -CONFIG_B53_SRAB_DRIVER=m -CONFIG_B53_SERDES=m -CONFIG_NET_DSA_BCM_SF2=m -# CONFIG_NET_DSA_LOOP is not set -CONFIG_NET_DSA_LANTIQ_GSWIP=m -CONFIG_NET_DSA_MT7530=m -CONFIG_NET_DSA_MV88E6060=m -CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477=m -CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -# CONFIG_NET_DSA_MV88E6XXX_PTP is not set -CONFIG_NET_DSA_SJA1105=m -CONFIG_NET_DSA_QCA8K=m -CONFIG_NET_DSA_REALTEK_SMI=m -CONFIG_NET_DSA_SMSC_LAN9303=m -CONFIG_NET_DSA_SMSC_LAN9303_I2C=m -CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m -# end of Distributed Switch Architecture drivers - -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_3C589=m -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -CONFIG_ET131X=m -CONFIG_NET_VENDOR_ALACRITECH=y -CONFIG_SLICOSS=m -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_ALTERA_TSE=m -CONFIG_NET_VENDOR_AMAZON=y -CONFIG_ENA_ETHERNET=m -CONFIG_NET_VENDOR_AMD=y -CONFIG_AMD8111_ETH=m -CONFIG_PCNET32=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_AMD_XGBE=m -# CONFIG_AMD_XGBE_DCB is not set -CONFIG_AMD_XGBE_HAVE_ECC=y -CONFIG_NET_VENDOR_AQUANTIA=y -CONFIG_AQTION=m -CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=m -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_BCMGENET=m -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_TIGON3_HWMON=y -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -# CONFIG_SYSTEMPORT is not set -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_BNXT_FLOWER_OFFLOAD=y -# CONFIG_BNXT_DCB is not set -CONFIG_BNXT_HWMON=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CADENCE=y -CONFIG_MACB=m -CONFIG_MACB_USE_HWSTAMP=y -CONFIG_MACB_PCI=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_THUNDER_NIC_PF=m -CONFIG_THUNDER_NIC_VF=m -CONFIG_THUNDER_NIC_BGX=m -CONFIG_THUNDER_NIC_RGX=m -CONFIG_CAVIUM_PTP=m -CONFIG_LIQUIDIO=m -CONFIG_LIQUIDIO_VF=m -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4_DCB=y -CONFIG_CHELSIO_T4_FCOE=y -CONFIG_CHELSIO_T4VF=m -CONFIG_CHELSIO_LIB=m -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -# CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_CX_ECAT=m -CONFIG_DNET=m -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_BE2=y -CONFIG_BE2NET_BE3=y -CONFIG_BE2NET_LANCER=y -CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_NET_VENDOR_HP=y -CONFIG_HP100=m -CONFIG_NET_VENDOR_HUAWEI=y -CONFIG_HINIC=m -CONFIG_NET_VENDOR_I825XX=y -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_E1000E_HWTS=y -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGB_DCA=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBE_DCA=y -CONFIG_IXGBE_DCB=y -CONFIG_IXGBE_IPSEC=y -CONFIG_IXGBEVF=m -CONFIG_IXGBEVF_IPSEC=y -CONFIG_I40E=m -CONFIG_I40E_DCB=y -CONFIG_IAVF=m -CONFIG_I40EVF=m -CONFIG_ICE=m -CONFIG_FM10K=m -CONFIG_IGC=m -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_DCB=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX4_CORE_GEN2=y -CONFIG_MLX5_CORE=m -# CONFIG_MLX5_FPGA is not set -CONFIG_MLX5_CORE_EN=y -CONFIG_MLX5_EN_ARFS=y -CONFIG_MLX5_EN_RXNFC=y -CONFIG_MLX5_MPFS=y -CONFIG_MLX5_ESWITCH=y -CONFIG_MLX5_CORE_EN_DCB=y -# CONFIG_MLX5_CORE_IPOIB is not set -CONFIG_MLXSW_CORE=m -CONFIG_MLXSW_CORE_HWMON=y -CONFIG_MLXSW_CORE_THERMAL=y -CONFIG_MLXSW_PCI=m -CONFIG_MLXSW_I2C=m -CONFIG_MLXSW_SWITCHIB=m -CONFIG_MLXSW_SWITCHX2=m -CONFIG_MLXSW_SPECTRUM=m -CONFIG_MLXSW_SPECTRUM_DCB=y -CONFIG_MLXSW_MINIMAL=m -CONFIG_MLXFW=m -CONFIG_NET_VENDOR_MICREL=y -CONFIG_KS8842=m -CONFIG_KS8851=m -CONFIG_KS8851_MLL=m -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MICROCHIP=y -CONFIG_ENC28J60=m -# CONFIG_ENC28J60_WRITEVERIFY is not set -CONFIG_ENCX24J600=m -CONFIG_LAN743X=m -CONFIG_NET_VENDOR_MICROSEMI=y -CONFIG_MSCC_OCELOT_SWITCH=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_MYRI10GE_DCA=y -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_NETERION=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_NETRONOME=y -CONFIG_NFP=m -# CONFIG_NFP_APP_FLOWER is not set -CONFIG_NFP_APP_ABM_NIC=y -# CONFIG_NFP_DEBUG is not set -CONFIG_NET_VENDOR_NI=y -CONFIG_NI_XGE_MANAGEMENT_ENET=m -CONFIG_NET_VENDOR_8390=y -CONFIG_PCMCIA_AXNET=m -CONFIG_NE2K_PCI=m -CONFIG_PCMCIA_PCNET=m -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_FORCEDETH=m -CONFIG_NET_VENDOR_OKI=y -CONFIG_ETHOC=m -CONFIG_NET_VENDOR_PACKET_ENGINES=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_DCB=y -CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QED_LL2=y -CONFIG_QED_SRIOV=y -CONFIG_QEDE=m -CONFIG_QED_RDMA=y -CONFIG_QED_ISCSI=y -CONFIG_QED_FCOE=y -CONFIG_QED_OOO=y -CONFIG_NET_VENDOR_QUALCOMM=y -CONFIG_QCOM_EMAC=m -CONFIG_RMNET=m -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_ATP=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_ROCKER=y -CONFIG_ROCKER=m -CONFIG_NET_VENDOR_SAMSUNG=y -CONFIG_SXGBE_ETH=m -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SOLARFLARE=y -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -CONFIG_SFC_MCDI_LOGGING=y -CONFIG_SFC_FALCON=m -CONFIG_SFC_FALCON_MTD=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -CONFIG_SIS900=m -CONFIG_SIS190=m -CONFIG_NET_VENDOR_SMSC=y -CONFIG_PCMCIA_SMC91C92=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -CONFIG_SMSC9420=m -# CONFIG_NET_VENDOR_SOCIONEXT is not set -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -CONFIG_STMMAC_PLATFORM=m -CONFIG_DWMAC_GENERIC=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -CONFIG_DWC_XLGMAC=m -CONFIG_DWC_XLGMAC_PCI=m -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -# CONFIG_TI_CPSW_PHY_SEL is not set -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -CONFIG_WIZNET_W5100=m -CONFIG_WIZNET_W5300=m -# CONFIG_WIZNET_BUS_DIRECT is not set -# CONFIG_WIZNET_BUS_INDIRECT is not set -CONFIG_WIZNET_BUS_ANY=y -# CONFIG_WIZNET_W5100_SPI is not set -CONFIG_NET_VENDOR_XILINX=y -CONFIG_XILINX_LL_TEMAC=m -CONFIG_NET_VENDOR_XIRCOM=y -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -# CONFIG_HIPPI is not set -CONFIG_NET_SB1000=m -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BCM_UNIMAC=m -CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_CAVIUM=m -CONFIG_MDIO_GPIO=m -CONFIG_MDIO_I2C=m -CONFIG_MDIO_MSCC_MIIM=m -CONFIG_MDIO_THUNDER=m -CONFIG_PHYLINK=m -CONFIG_PHYLIB=y -CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set - -# -# MII PHY device drivers -# -CONFIG_SFP=m -CONFIG_AMD_PHY=m -CONFIG_AQUANTIA_PHY=m -CONFIG_AX88796B_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_CORTINA_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_DP83822_PHY=m -CONFIG_DP83TC811_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_FIXED_PHY=y -CONFIG_ICPLUS_PHY=m -CONFIG_INTEL_XWAY_PHY=m -CONFIG_LSI_ET1011C_PHY=m -CONFIG_LXT_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_MARVELL_10G_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_MICROCHIP_T1_PHY=m -CONFIG_MICROSEMI_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_RENESAS_PHY=m -CONFIG_ROCKCHIP_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_STE10XP=m -CONFIG_TERANETICS_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_XILINX_GMII2RGMII=m -CONFIG_MICREL_KS8995MA=m -CONFIG_PLIP=m -CONFIG_PPP=y -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=y -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_USB_NET_DRIVERS=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_USB_NET_AQC111=m -CONFIG_WLAN=y -# CONFIG_WIRELESS_WDS is not set -CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ADM8211=m -CONFIG_ATH_COMMON=m -CONFIG_WLAN_VENDOR_ATH=y -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_COMMON_DEBUG=y -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -CONFIG_ATH9K_AHB=y -CONFIG_ATH9K_DEBUGFS=y -CONFIG_ATH9K_STATION_STATISTICS=y -# CONFIG_ATH9K_DYNACK is not set -CONFIG_ATH9K_WOW=y -CONFIG_ATH9K_RFKILL=y -CONFIG_ATH9K_CHANNEL_CONTEXT=y -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_HTC=m -CONFIG_ATH9K_HTC_DEBUGFS=y -CONFIG_ATH9K_HWRNG=y -# CONFIG_ATH9K_COMMON_SPECTRAL is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -# CONFIG_CARL9170_DEBUGFS is not set -CONFIG_CARL9170_WPC=y -CONFIG_CARL9170_HWRNG=y -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -CONFIG_WIL6210_TRACING=y -CONFIG_WIL6210_DEBUGFS=y -CONFIG_ATH10K=m -CONFIG_ATH10K_CE=y -CONFIG_ATH10K_PCI=m -CONFIG_ATH10K_SDIO=m -CONFIG_ATH10K_USB=m -# CONFIG_ATH10K_DEBUG is not set -CONFIG_ATH10K_DEBUGFS=y -# CONFIG_ATH10K_SPECTRAL is not set -CONFIG_ATH10K_TRACING=y -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set -CONFIG_WLAN_VENDOR_ATMEL=y -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AT76C50X_USB=m -CONFIG_WLAN_VENDOR_BROADCOM=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -# CONFIG_B43_SDIO is not set -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -CONFIG_BRCM_TRACING=y -# CONFIG_BRCMDBG is not set -CONFIG_WLAN_VENDOR_CISCO=y -CONFIG_AIRO=m -CONFIG_AIRO_CS=m -CONFIG_WLAN_VENDOR_INTEL=y -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -CONFIG_IWLEGACY_DEBUGFS=y -# end of iwl3945 / iwl4965 Debugging Options - -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -CONFIG_IWLWIFI_DEBUGFS=y -CONFIG_IWLWIFI_DEVICE_TRACING=y -# end of Debugging Options - -CONFIG_WLAN_VENDOR_INTERSIL=y -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_HERMES=m -# CONFIG_HERMES_PRISM is not set -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ORINOCO_USB=m -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_P54_SPI=m -# CONFIG_P54_SPI_DEFAULT_EEPROM is not set -CONFIG_P54_LEDS=y -# CONFIG_PRISM54 is not set -CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_SPI=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_MWIFIEX_USB=m -CONFIG_MWL8K=m -CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m -# CONFIG_MT76x0U is not set -# CONFIG_MT76x0E is not set -# CONFIG_MT76x2E is not set -# CONFIG_MT76x2U is not set -# CONFIG_MT7603E is not set -# CONFIG_MT7615E is not set -CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_LIB_DEBUGFS is not set -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WLAN_VENDOR_REALTEK=y -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -CONFIG_RTL8XXXU_UNTESTED=y -# CONFIG_RTW88 is not set -CONFIG_WLAN_VENDOR_RSI=y -CONFIG_RSI_91X=m -# CONFIG_RSI_DEBUGFS is not set -CONFIG_RSI_SDIO=m -CONFIG_RSI_USB=m -CONFIG_RSI_COEX=y -CONFIG_WLAN_VENDOR_ST=y -CONFIG_CW1200=m -CONFIG_CW1200_WLAN_SDIO=m -CONFIG_CW1200_WLAN_SPI=m -CONFIG_WLAN_VENDOR_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SPI=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_WLAN_VENDOR_ZYDAS=y -CONFIG_USB_ZD1201=m -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_QTNFMAC=m -CONFIG_QTNFMAC_PCIE=m -CONFIG_PCMCIA_RAYCS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_MAC80211_HWSIM=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_VIRT_WIFI=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -# end of WiMAX Wireless Broadband devices - -CONFIG_WAN=y -CONFIG_LANMEDIA=m -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -CONFIG_PC300TOO=m -CONFIG_FARSYNC=m -CONFIG_DSCC4=m -CONFIG_DSCC4_PCISYNC=y -CONFIG_DSCC4_PCI_RST=y -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_SBNI=m -# CONFIG_SBNI_MULTILINE is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_AT86RF230=m -CONFIG_IEEE802154_AT86RF230_DEBUGFS=y -CONFIG_IEEE802154_MRF24J40=m -CONFIG_IEEE802154_CC2520=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_IEEE802154_ADF7242=m -CONFIG_IEEE802154_CA8210=m -# CONFIG_IEEE802154_CA8210_DEBUGFS is not set -CONFIG_IEEE802154_MCR20A=m -# CONFIG_IEEE802154_HWSIM is not set -CONFIG_XEN_NETDEV_FRONTEND=y -CONFIG_XEN_NETDEV_BACKEND=m -CONFIG_VMXNET3=m -CONFIG_FUJITSU_ES=m -CONFIG_THUNDERBOLT_NET=m -CONFIG_HYPERV_NET=m -CONFIG_NETDEVSIM=m -CONFIG_NET_FAILOVER=y -CONFIG_ISDN=y -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y -CONFIG_ISDN_X25=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DIVERSION=m -# end of ISDN feature submodules - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -# CONFIG_HISAX_NO_SENDCOMPLETE is not set -# CONFIG_HISAX_NO_LLC is not set -# CONFIG_HISAX_NO_KEYPAD is not set -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# -CONFIG_HISAX_SEDLBAUER_CS=m -CONFIG_HISAX_ELSA_CS=m -CONFIG_HISAX_AVM_A1_CS=m -CONFIG_HISAX_TELES_CS=m - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -CONFIG_HISAX_HFC4S8S=m -CONFIG_HISAX_FRITZ_PCIPNP=m -# end of Passive cards - -CONFIG_ISDN_CAPI=m -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPIDRV=m -# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set - -# -# CAPI hardware drivers -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_AVM_CS=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_ISDN_DRV_GIGASET=m -# CONFIG_GIGASET_CAPI is not set -CONFIG_GIGASET_I4L=y -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -CONFIG_GIGASET_M101=m -# CONFIG_GIGASET_DEBUG is not set -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y -CONFIG_MISDN=m -CONFIG_MISDN_DSP=m -CONFIG_MISDN_L1OIP=m - -# -# mISDN hardware drivers -# -CONFIG_MISDN_HFCPCI=m -CONFIG_MISDN_HFCMULTI=m -CONFIG_MISDN_HFCUSB=m -CONFIG_MISDN_AVMFRITZ=m -CONFIG_MISDN_SPEEDFAX=m -CONFIG_MISDN_INFINEON=m -CONFIG_MISDN_W6692=m -CONFIG_MISDN_NETJET=m -CONFIG_MISDN_IPAC=m -CONFIG_MISDN_ISAR=m -CONFIG_ISDN_HDLC=m -CONFIG_NVM=y -CONFIG_NVM_PBLK=m -# CONFIG_NVM_PBLK_DEBUG is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=m -CONFIG_INPUT_FF_MEMLESS=m -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ADC=m -CONFIG_KEYBOARD_ADP5520=m -CONFIG_KEYBOARD_ADP5588=m -CONFIG_KEYBOARD_ADP5589=m -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1050=m -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m -CONFIG_KEYBOARD_DLINK_DIR685=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_GPIO_POLLED=m -CONFIG_KEYBOARD_TCA6416=m -CONFIG_KEYBOARD_TCA8418=m -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_LM8323=m -CONFIG_KEYBOARD_LM8333=m -CONFIG_KEYBOARD_MAX7359=m -CONFIG_KEYBOARD_MCS=m -CONFIG_KEYBOARD_MPR121=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_OPENCORES=m -CONFIG_KEYBOARD_SAMSUNG=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_TM2_TOUCHKEY=m -CONFIG_KEYBOARD_TWL4030=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_KEYBOARD_CROS_EC=m -CONFIG_KEYBOARD_MTK_PMIC=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_BYD=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y -CONFIG_MOUSE_PS2_SENTELIC=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_VMMOUSE=y -CONFIG_MOUSE_PS2_SMBUS=y -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_CYAPA=m -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -CONFIG_MOUSE_ELAN_I2C_SMBUS=y -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_AS5011=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_JOYSTICK_WALKERA0701=m -CONFIG_JOYSTICK_PSXPAD_SPI=m -# CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set -CONFIG_JOYSTICK_PXRC=m -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_USB_PEGASUS=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_88PM860X=m -CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_AD7877=m -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -CONFIG_TOUCHSCREEN_AD7879_SPI=m -CONFIG_TOUCHSCREEN_ADC=m -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set -CONFIG_TOUCHSCREEN_AUO_PIXCIR=m -CONFIG_TOUCHSCREEN_BU21013=m -CONFIG_TOUCHSCREEN_BU21029=m -CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m -CONFIG_TOUCHSCREEN_CY8CTMG110=m -CONFIG_TOUCHSCREEN_CYTTSP_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP_SPI=m -CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m -CONFIG_TOUCHSCREEN_DA9034=m -CONFIG_TOUCHSCREEN_DA9052=m -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m -CONFIG_TOUCHSCREEN_EXC3000=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_HIDEEP=m -CONFIG_TOUCHSCREEN_ILI210X=m -CONFIG_TOUCHSCREEN_S6SY761=m -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_TOUCHSCREEN_EKTF2127=m -CONFIG_TOUCHSCREEN_ELAN=m -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -CONFIG_TOUCHSCREEN_WACOM_I2C=m -CONFIG_TOUCHSCREEN_MAX11801=m -CONFIG_TOUCHSCREEN_MCS5000=m -CONFIG_TOUCHSCREEN_MMS114=m -CONFIG_TOUCHSCREEN_MELFAS_MIP4=m -CONFIG_TOUCHSCREEN_MTOUCH=m -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -CONFIG_TOUCHSCREEN_EDT_FT5X06=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_PIXCIR=m -CONFIG_TOUCHSCREEN_WDT87XX_I2C=m -CONFIG_TOUCHSCREEN_WM831X=m -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -CONFIG_TOUCHSCREEN_TSC_SERIO=m -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -CONFIG_TOUCHSCREEN_TSC2004=m -CONFIG_TOUCHSCREEN_TSC2005=m -CONFIG_TOUCHSCREEN_TSC2007=m -# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set -CONFIG_TOUCHSCREEN_PCAP=m -CONFIG_TOUCHSCREEN_RM_TS=m -CONFIG_TOUCHSCREEN_SILEAD=m -CONFIG_TOUCHSCREEN_SIS_I2C=m -CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_STMFTS=m -CONFIG_TOUCHSCREEN_SUR40=m -CONFIG_TOUCHSCREEN_SURFACE3_SPI=m -CONFIG_TOUCHSCREEN_SX8654=m -CONFIG_TOUCHSCREEN_TPS6507X=m -CONFIG_TOUCHSCREEN_ZET6223=m -CONFIG_TOUCHSCREEN_ZFORCE=m -CONFIG_TOUCHSCREEN_ROHM_BU21023=m -CONFIG_TOUCHSCREEN_IQS5XX=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_88PM860X_ONKEY=m -CONFIG_INPUT_88PM80X_ONKEY=m -CONFIG_INPUT_AD714X=m -CONFIG_INPUT_AD714X_I2C=m -CONFIG_INPUT_AD714X_SPI=m -CONFIG_INPUT_ARIZONA_HAPTICS=m -CONFIG_INPUT_BMA150=m -CONFIG_INPUT_E3X0_BUTTON=m -CONFIG_INPUT_MSM_VIBRATOR=m -CONFIG_INPUT_PCSPKR=m -CONFIG_INPUT_MAX77693_HAPTIC=m -CONFIG_INPUT_MAX8925_ONKEY=m -CONFIG_INPUT_MAX8997_HAPTIC=m -CONFIG_INPUT_MC13783_PWRBUTTON=m -CONFIG_INPUT_MMA8450=m -CONFIG_INPUT_APANEL=m -CONFIG_INPUT_GP2A=m -CONFIG_INPUT_GPIO_BEEPER=m -CONFIG_INPUT_GPIO_DECODER=m -CONFIG_INPUT_GPIO_VIBRA=m -CONFIG_INPUT_ATLAS_BTNS=m -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_KXTJ9=m -# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_REGULATOR_HAPTIC=m -CONFIG_INPUT_RETU_PWRBUTTON=m -CONFIG_INPUT_AXP20X_PEK=m -CONFIG_INPUT_TWL4030_PWRBUTTON=m -CONFIG_INPUT_TWL4030_VIBRA=m -CONFIG_INPUT_TWL6040_VIBRA=m -CONFIG_INPUT_UINPUT=y -CONFIG_INPUT_PALMAS_PWRBUTTON=m -CONFIG_INPUT_PCF50633_PMU=m -CONFIG_INPUT_PCF8574=m -CONFIG_INPUT_PWM_BEEPER=m -CONFIG_INPUT_PWM_VIBRA=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_INPUT_DA9052_ONKEY=m -CONFIG_INPUT_DA9055_ONKEY=m -CONFIG_INPUT_DA9063_ONKEY=m -CONFIG_INPUT_WM831X_ON=m -CONFIG_INPUT_PCAP=m -CONFIG_INPUT_ADXL34X=m -CONFIG_INPUT_ADXL34X_I2C=m -CONFIG_INPUT_ADXL34X_SPI=m -CONFIG_INPUT_IMS_PCU=m -CONFIG_INPUT_CMA3000=m -CONFIG_INPUT_CMA3000_I2C=m -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m -CONFIG_INPUT_IDEAPAD_SLIDEBAR=m -CONFIG_INPUT_SOC_BUTTON_ARRAY=m -CONFIG_INPUT_DRV260X_HAPTICS=m -CONFIG_INPUT_DRV2665_HAPTICS=m -CONFIG_INPUT_DRV2667_HAPTICS=m -CONFIG_INPUT_RAVE_SP_PWRBUTTON=m -CONFIG_RMI4_CORE=m -CONFIG_RMI4_I2C=m -CONFIG_RMI4_SPI=m -CONFIG_RMI4_SMB=m -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -CONFIG_RMI4_F55=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_CT82C710=m -CONFIG_SERIO_PARKBD=m -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -CONFIG_SERIO_ALTERA_PS2=m -CONFIG_SERIO_PS2MULT=m -CONFIG_SERIO_ARC_PS2=m -CONFIG_HYPERV_KEYBOARD=m -CONFIG_SERIO_GPIO_PS2=m -CONFIG_USERIO=m -CONFIG_GAMEPORT=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_GAMEPORT_EMU10K1=m -CONFIG_GAMEPORT_FM801=m -# end of Hardware I/O ports -# end of Input device support - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=0 -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_NOZOMI=m -CONFIG_ISI=m -CONFIG_N_HDLC=m -CONFIG_N_GSM=m -CONFIG_TRACE_ROUTER=m -CONFIG_TRACE_SINK=m -CONFIG_NULL_TTY=m -CONFIG_LDISC_AUTOLOAD=y -CONFIG_DEVMEM=y -# CONFIG_DEVKMEM is not set - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_PNP=y -# CONFIG_SERIAL_8250_FINTEK is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_EXAR=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_MEN_MCB=m -CONFIG_SERIAL_8250_NR_UARTS=48 -CONFIG_SERIAL_8250_RUNTIME_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_8250_DW=m -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_8250_LPSS=m -CONFIG_SERIAL_8250_MID=m -CONFIG_SERIAL_8250_MOXA=m - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_KGDB_NMI=y -CONFIG_SERIAL_MAX3100=m -CONFIG_SERIAL_MAX310X=y -CONFIG_SERIAL_UARTLITE=m -CONFIG_SERIAL_UARTLITE_NR_UARTS=1 -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_CONSOLE_POLL=y -CONFIG_SERIAL_JSM=m -CONFIG_SERIAL_SCCNXP=y -CONFIG_SERIAL_SCCNXP_CONSOLE=y -CONFIG_SERIAL_SC16IS7XX_CORE=m -CONFIG_SERIAL_SC16IS7XX=m -CONFIG_SERIAL_SC16IS7XX_I2C=y -CONFIG_SERIAL_SC16IS7XX_SPI=y -CONFIG_SERIAL_ALTERA_JTAGUART=m -CONFIG_SERIAL_ALTERA_UART=m -CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 -CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 -# CONFIG_SERIAL_IFX6X60 is not set -CONFIG_SERIAL_ARC=m -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -CONFIG_SERIAL_FSL_LPUART=m -CONFIG_SERIAL_MEN_Z135=m -# end of Serial drivers - -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_TTY_PRINTK=y -CONFIG_TTY_PRINTK_LEVEL=6 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=m -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DMI_DECODE=y -CONFIG_IPMI_PLAT_DATA=y -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_SSIF=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_HW_RANDOM_INTEL=m -CONFIG_HW_RANDOM_AMD=m -CONFIG_HW_RANDOM_VIA=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_NVRAM=m -CONFIG_APPLICOM=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m -CONFIG_SCR24X=m -CONFIG_IPWIRELESS=m -# end of PCMCIA character devices - -CONFIG_MWAVE=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 -CONFIG_HPET=y -CONFIG_HPET_MMAP=y -CONFIG_HPET_MMAP_DEFAULT=y -CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=y -CONFIG_HW_RANDOM_TPM=y -CONFIG_TCG_TIS_CORE=y -CONFIG_TCG_TIS=y -CONFIG_TCG_TIS_SPI=m -CONFIG_TCG_TIS_I2C_ATMEL=m -CONFIG_TCG_TIS_I2C_INFINEON=m -CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_TCG_INFINEON=m -CONFIG_TCG_XEN=m -CONFIG_TCG_CRB=y -CONFIG_TCG_VTPM_PROXY=m -CONFIG_TCG_TIS_ST33ZP24=m -CONFIG_TCG_TIS_ST33ZP24_I2C=m -CONFIG_TCG_TIS_ST33ZP24_SPI=m -CONFIG_TELCLOCK=m -CONFIG_DEVPORT=y -CONFIG_XILLYBUS=m -CONFIG_XILLYBUS_PCIE=m -# end of Character devices - -# CONFIG_RANDOM_TRUST_CPU is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_ACPI_I2C_OPREGION=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_MUX_GPIO=m -CONFIG_I2C_MUX_LTC4306=m -CONFIG_I2C_MUX_PCA9541=m -CONFIG_I2C_MUX_PCA954x=m -CONFIG_I2C_MUX_REG=m -CONFIG_I2C_MUX_MLXCPLD=m -# end of Multiplexer I2C Chip support - -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD756_S4882=m -CONFIG_I2C_AMD8111=m -CONFIG_I2C_AMD_MP2=m -CONFIG_I2C_I801=m -CONFIG_I2C_ISCH=m -CONFIG_I2C_ISMT=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_CHT_WC=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_NFORCE2_S4985=m -CONFIG_I2C_NVIDIA_GPU=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m - -# -# ACPI drivers -# -CONFIG_I2C_SCMI=m - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_CBUS_GPIO=m -CONFIG_I2C_DESIGNWARE_CORE=y -CONFIG_I2C_DESIGNWARE_PLATFORM=y -# CONFIG_I2C_DESIGNWARE_SLAVE is not set -CONFIG_I2C_DESIGNWARE_PCI=m -CONFIG_I2C_DESIGNWARE_BAYTRAIL=y -CONFIG_I2C_EMEV2=m -CONFIG_I2C_GPIO=m -# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set -CONFIG_I2C_KEMPLD=m -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_XILINX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -CONFIG_I2C_DLN2=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_MLXCPLD=m -CONFIG_I2C_CROS_EC_TUNNEL=m -# end of I2C Hardware Bus support - -CONFIG_I2C_STUB=m -CONFIG_I2C_SLAVE=y -CONFIG_I2C_SLAVE_EEPROM=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# end of I2C support - -CONFIG_I3C=m -CONFIG_CDNS_I3C_MASTER=m -CONFIG_DW_I3C_MASTER=m -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_ALTERA=m -CONFIG_SPI_AXI_SPI_ENGINE=m -CONFIG_SPI_BITBANG=m -CONFIG_SPI_BUTTERFLY=m -CONFIG_SPI_CADENCE=m -CONFIG_SPI_DESIGNWARE=m -CONFIG_SPI_DW_PCI=m -CONFIG_SPI_DW_MID_DMA=y -CONFIG_SPI_DW_MMIO=m -CONFIG_SPI_DLN2=m -CONFIG_SPI_NXP_FLEXSPI=m -CONFIG_SPI_GPIO=m -CONFIG_SPI_LM70_LLP=m -CONFIG_SPI_OC_TINY=m -CONFIG_SPI_PXA2XX=m -CONFIG_SPI_PXA2XX_PCI=m -CONFIG_SPI_ROCKCHIP=m -CONFIG_SPI_SC18IS602=m -CONFIG_SPI_SIFIVE=m -CONFIG_SPI_MXIC=m -CONFIG_SPI_XCOMM=m -# CONFIG_SPI_XILINX is not set -CONFIG_SPI_ZYNQMP_GQSPI=m - -# -# SPI Protocol Masters -# -CONFIG_SPI_SPIDEV=m -# CONFIG_SPI_LOOPBACK_TEST is not set -CONFIG_SPI_TLE62X0=m -# CONFIG_SPI_SLAVE is not set -CONFIG_SPMI=m -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# - -# -# HSI clients -# -CONFIG_HSI_CHAR=m -CONFIG_PPS=m -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -CONFIG_PPS_CLIENT_GPIO=m - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PTP_1588_CLOCK_KVM=m -# end of PTP clock support - -CONFIG_PINCTRL=y -CONFIG_PINMUX=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AMD=y -CONFIG_PINCTRL_MCP23S08=m -CONFIG_PINCTRL_SX150X=y -CONFIG_PINCTRL_BAYTRAIL=y -CONFIG_PINCTRL_CHERRYVIEW=m -CONFIG_PINCTRL_INTEL=m -CONFIG_PINCTRL_BROXTON=m -CONFIG_PINCTRL_CANNONLAKE=m -CONFIG_PINCTRL_CEDARFORK=m -CONFIG_PINCTRL_DENVERTON=m -CONFIG_PINCTRL_GEMINILAKE=m -CONFIG_PINCTRL_ICELAKE=m -CONFIG_PINCTRL_LEWISBURG=m -CONFIG_PINCTRL_SUNRISEPOINT=m -CONFIG_PINCTRL_MADERA=m -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_FASTPATH_LIMIT=512 -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=m -CONFIG_GPIO_MAX730X=m - -# -# Memory mapped GPIO drivers -# -CONFIG_GPIO_AMDPT=m -CONFIG_GPIO_DWAPB=m -CONFIG_GPIO_EXAR=m -CONFIG_GPIO_GENERIC_PLATFORM=m -CONFIG_GPIO_ICH=m -CONFIG_GPIO_LYNXPOINT=y -CONFIG_GPIO_MB86S7X=m -CONFIG_GPIO_MENZ127=m -CONFIG_GPIO_VX855=m -CONFIG_GPIO_AMD_FCH=m -# end of Memory mapped GPIO drivers - -# -# Port-mapped I/O GPIO drivers -# -CONFIG_GPIO_F7188X=m -CONFIG_GPIO_IT87=m -CONFIG_GPIO_SCH=m -CONFIG_GPIO_SCH311X=m -CONFIG_GPIO_WINBOND=m -CONFIG_GPIO_WS16C48=m -# end of Port-mapped I/O GPIO drivers - -# -# I2C GPIO expanders -# -CONFIG_GPIO_ADP5588=m -CONFIG_GPIO_MAX7300=m -CONFIG_GPIO_MAX732X=m -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m -CONFIG_GPIO_TPIC2810=m -# end of I2C GPIO expanders - -# -# MFD GPIO expanders -# -CONFIG_GPIO_ADP5520=m -CONFIG_GPIO_ARIZONA=m -CONFIG_GPIO_BD9571MWV=m -CONFIG_GPIO_CRYSTAL_COVE=m -CONFIG_GPIO_DA9052=m -CONFIG_GPIO_DA9055=m -CONFIG_GPIO_DLN2=m -CONFIG_GPIO_JANZ_TTL=m -CONFIG_GPIO_KEMPLD=m -CONFIG_GPIO_LP3943=m -CONFIG_GPIO_LP873X=m -CONFIG_GPIO_MADERA=m -CONFIG_GPIO_PALMAS=y -CONFIG_GPIO_RC5T583=y -CONFIG_GPIO_TPS65086=m -CONFIG_GPIO_TPS6586X=y -CONFIG_GPIO_TPS65910=y -CONFIG_GPIO_TPS65912=m -CONFIG_GPIO_TQMX86=m -CONFIG_GPIO_TWL4030=m -CONFIG_GPIO_TWL6040=m -CONFIG_GPIO_UCB1400=m -CONFIG_GPIO_WHISKEY_COVE=m -CONFIG_GPIO_WM831X=m -CONFIG_GPIO_WM8350=m -CONFIG_GPIO_WM8994=m -# end of MFD GPIO expanders - -# -# PCI GPIO expanders -# -CONFIG_GPIO_AMD8111=m -CONFIG_GPIO_ML_IOH=m -CONFIG_GPIO_PCI_IDIO_16=m -CONFIG_GPIO_PCIE_IDIO_24=m -CONFIG_GPIO_RDC321X=m -# end of PCI GPIO expanders - -# -# SPI GPIO expanders -# -CONFIG_GPIO_MAX3191X=m -CONFIG_GPIO_MAX7301=m -CONFIG_GPIO_MC33880=m -CONFIG_GPIO_PISOSR=m -CONFIG_GPIO_XRA1403=m -# end of SPI GPIO expanders - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -# end of USB GPIO expanders - -# CONFIG_GPIO_MOCKUP is not set -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_MATROX=m -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m -CONFIG_W1_MASTER_GPIO=m -# end of 1-wire Bus Masters - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2405=m -CONFIG_W1_SLAVE_DS2408=m -CONFIG_W1_SLAVE_DS2408_READBACK=y -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2805=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -# CONFIG_W1_SLAVE_DS2433_CRC is not set -CONFIG_W1_SLAVE_DS2438=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_DS28E17=m -# end of 1-wire Slaves - -CONFIG_POWER_AVS=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_RESTART=y -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=m -CONFIG_GENERIC_ADC_BATTERY=m -CONFIG_MAX8925_POWER=m -CONFIG_WM831X_BACKUP=m -CONFIG_WM831X_POWER=m -CONFIG_WM8350_POWER=m -CONFIG_TEST_POWER=m -CONFIG_BATTERY_88PM860X=m -CONFIG_CHARGER_ADP5061=m -CONFIG_BATTERY_DS2760=m -CONFIG_BATTERY_DS2780=m -CONFIG_BATTERY_DS2781=m -CONFIG_BATTERY_DS2782=m -CONFIG_BATTERY_SBS=m -CONFIG_CHARGER_SBS=m -CONFIG_MANAGER_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=m -CONFIG_BATTERY_BQ27XXX_HDQ=m -# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set -CONFIG_BATTERY_DA9030=m -CONFIG_BATTERY_DA9052=m -CONFIG_CHARGER_DA9150=m -CONFIG_BATTERY_DA9150=m -CONFIG_CHARGER_AXP20X=m -CONFIG_BATTERY_AXP20X=m -CONFIG_AXP20X_POWER=m -CONFIG_AXP288_CHARGER=m -CONFIG_AXP288_FUEL_GAUGE=m -CONFIG_BATTERY_MAX17040=m -CONFIG_BATTERY_MAX17042=m -CONFIG_BATTERY_MAX1721X=m -CONFIG_BATTERY_TWL4030_MADC=m -CONFIG_CHARGER_88PM860X=m -CONFIG_CHARGER_PCF50633=m -CONFIG_BATTERY_RX51=m -CONFIG_CHARGER_ISP1704=m -CONFIG_CHARGER_MAX8903=m -CONFIG_CHARGER_TWL4030=m -CONFIG_CHARGER_LP8727=m -CONFIG_CHARGER_LP8788=m -CONFIG_CHARGER_GPIO=m -CONFIG_CHARGER_MANAGER=y -CONFIG_CHARGER_LT3651=m -CONFIG_CHARGER_MAX14577=m -CONFIG_CHARGER_MAX77693=m -CONFIG_CHARGER_MAX8997=m -CONFIG_CHARGER_MAX8998=m -CONFIG_CHARGER_BQ2415X=m -CONFIG_CHARGER_BQ24190=m -CONFIG_CHARGER_BQ24257=m -CONFIG_CHARGER_BQ24735=m -CONFIG_CHARGER_BQ25890=m -CONFIG_CHARGER_SMB347=m -CONFIG_CHARGER_TPS65090=m -CONFIG_BATTERY_GAUGE_LTC2941=m -CONFIG_BATTERY_RT5033=m -CONFIG_CHARGER_RT9455=m -CONFIG_CHARGER_CROS_USBPD=m -CONFIG_HWMON=y -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -CONFIG_SENSORS_ABITUGURU=m -CONFIG_SENSORS_ABITUGURU3=m -CONFIG_SENSORS_AD7314=m -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_ADT7X10=m -CONFIG_SENSORS_ADT7310=m -CONFIG_SENSORS_ADT7410=m -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_K8TEMP=m -CONFIG_SENSORS_K10TEMP=m -CONFIG_SENSORS_FAM15H_POWER=m -CONFIG_SENSORS_APPLESMC=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ASPEED=m -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DS620=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_DELL_SMM=m -CONFIG_SENSORS_DA9052_ADC=m -CONFIG_SENSORS_DA9055=m -CONFIG_SENSORS_I5K_AMB=m -CONFIG_SENSORS_F71805F=m -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FSCHMD=m -CONFIG_SENSORS_FTSTEUTATES=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_HIH6130=m -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -CONFIG_SENSORS_IIO_HWMON=m -CONFIG_SENSORS_I5500=m -CONFIG_SENSORS_CORETEMP=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_JC42=m -CONFIG_SENSORS_POWR1220=m -CONFIG_SENSORS_LINEAGE=m -CONFIG_SENSORS_LTC2945=m -CONFIG_SENSORS_LTC2990=m -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -CONFIG_SENSORS_LTC4222=m -CONFIG_SENSORS_LTC4245=m -CONFIG_SENSORS_LTC4260=m -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX1111=m -CONFIG_SENSORS_MAX16065=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_MAX1668=m -CONFIG_SENSORS_MAX197=m -CONFIG_SENSORS_MAX31722=m -CONFIG_SENSORS_MAX6621=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -CONFIG_SENSORS_MAX6697=m -CONFIG_SENSORS_MAX31790=m -CONFIG_SENSORS_MCP3021=m -CONFIG_SENSORS_TC654=m -CONFIG_SENSORS_MENF21BMC_HWMON=m -CONFIG_SENSORS_ADCXX=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM70=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_LM93=m -CONFIG_SENSORS_LM95234=m -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -CONFIG_SENSORS_NCT7802=m -CONFIG_SENSORS_NCT7904=m -CONFIG_SENSORS_NPCM7XX=m -CONFIG_SENSORS_PCF8591=m -CONFIG_PMBUS=m -CONFIG_SENSORS_PMBUS=m -CONFIG_SENSORS_ADM1275=m -CONFIG_SENSORS_IBM_CFFPS=m -CONFIG_SENSORS_IR35221=m -CONFIG_SENSORS_IR38064=m -CONFIG_SENSORS_ISL68137=m -CONFIG_SENSORS_LM25066=m -CONFIG_SENSORS_LTC2978=m -CONFIG_SENSORS_LTC2978_REGULATOR=y -CONFIG_SENSORS_LTC3815=m -CONFIG_SENSORS_MAX16064=m -CONFIG_SENSORS_MAX20751=m -CONFIG_SENSORS_MAX31785=m -CONFIG_SENSORS_MAX34440=m -CONFIG_SENSORS_MAX8688=m -CONFIG_SENSORS_TPS40422=m -CONFIG_SENSORS_TPS53679=m -CONFIG_SENSORS_UCD9000=m -CONFIG_SENSORS_UCD9200=m -CONFIG_SENSORS_ZL6100=m -CONFIG_SENSORS_SHT15=m -CONFIG_SENSORS_SHT21=m -CONFIG_SENSORS_SHT3x=m -CONFIG_SENSORS_SHTC1=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_SMSC47M192=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -CONFIG_SENSORS_SCH5636=m -CONFIG_SENSORS_STTS751=m -CONFIG_SENSORS_SMM665=m -CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS1015=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_ADS7871=m -CONFIG_SENSORS_AMC6821=m -CONFIG_SENSORS_INA209=m -CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_INA3221=m -CONFIG_SENSORS_TC74=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -CONFIG_SENSORS_TMP103=m -CONFIG_SENSORS_TMP108=m -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_VIA_CPUTEMP=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83773G=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83L786NG=m -CONFIG_SENSORS_W83627HF=m -CONFIG_SENSORS_W83627EHF=m -CONFIG_SENSORS_WM831X=m -CONFIG_SENSORS_WM8350=m -CONFIG_SENSORS_XGENE=m - -# -# ACPI drivers -# -CONFIG_SENSORS_ACPI_POWER=m -CONFIG_SENSORS_ATK0110=m -CONFIG_THERMAL=y -# CONFIG_THERMAL_STATISTICS is not set -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y -CONFIG_CLOCK_THERMAL=y -CONFIG_DEVFREQ_THERMAL=y -CONFIG_THERMAL_EMULATION=y - -# -# Intel thermal drivers -# -CONFIG_INTEL_POWERCLAMP=m -CONFIG_X86_PKG_TEMP_THERMAL=m -CONFIG_INTEL_SOC_DTS_IOSF_CORE=m -CONFIG_INTEL_SOC_DTS_THERMAL=m - -# -# ACPI INT340X thermal drivers -# -CONFIG_INT340X_THERMAL=m -CONFIG_ACPI_THERMAL_REL=m -CONFIG_INT3406_THERMAL=m -# end of ACPI INT340X thermal drivers - -CONFIG_INTEL_BXT_PMIC_THERMAL=m -CONFIG_INTEL_PCH_THERMAL=m -# end of Intel thermal drivers - -CONFIG_GENERIC_ADC_THERMAL=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y -CONFIG_WATCHDOG_SYSFS=y - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_DA9052_WATCHDOG=m -CONFIG_DA9055_WATCHDOG=m -CONFIG_DA9063_WATCHDOG=m -CONFIG_DA9062_WATCHDOG=m -CONFIG_MENF21BMC_WATCHDOG=m -CONFIG_MENZ069_WATCHDOG=m -CONFIG_WDAT_WDT=m -CONFIG_WM831X_WATCHDOG=m -CONFIG_WM8350_WATCHDOG=m -CONFIG_XILINX_WATCHDOG=m -CONFIG_ZIIRAVE_WATCHDOG=m -CONFIG_RAVE_SP_WATCHDOG=m -CONFIG_CADENCE_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_TWL4030_WATCHDOG=m -CONFIG_MAX63XX_WATCHDOG=m -CONFIG_RETU_WATCHDOG=m -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM1535_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_EBC_C384_WDT=m -CONFIG_F71808E_WDT=m -CONFIG_SP5100_TCO=m -CONFIG_SBC_FITPC2_WATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_IBMASR=m -CONFIG_WAFER_WDT=m -CONFIG_I6300ESB_WDT=m -CONFIG_IE6XX_WDT=m -CONFIG_ITCO_WDT=m -CONFIG_ITCO_VENDOR_SUPPORT=y -CONFIG_IT8712F_WDT=m -CONFIG_IT87_WDT=m -CONFIG_HP_WATCHDOG=m -CONFIG_HPWDT_NMI_DECODING=y -CONFIG_KEMPLD_WDT=m -CONFIG_SC1200_WDT=m -CONFIG_PC87413_WDT=m -CONFIG_NV_TCO=m -CONFIG_60XX_WDT=m -CONFIG_CPU5_WDT=m -CONFIG_SMSC_SCH311X_WDT=m -CONFIG_SMSC37B787_WDT=m -CONFIG_TQMX86_WDT=m -CONFIG_VIA_WDT=m -CONFIG_W83627HF_WDT=m -CONFIG_W83877F_WDT=m -CONFIG_W83977F_WDT=m -CONFIG_MACHZ_WDT=m -CONFIG_SBC_EPX_C3_WATCHDOG=m -CONFIG_NI903X_WDT=m -CONFIG_NIC7018_WDT=m -CONFIG_MEN_A21_WDT=m -CONFIG_XEN_WDT=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -# CONFIG_SSB_PCMCIAHOST is not set -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_GPIO=y -CONFIG_BCMA_POSSIBLE=y -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_SOC=y -CONFIG_BCMA_DRIVER_PCI=y -CONFIG_BCMA_SFLASH=y -CONFIG_BCMA_DRIVER_GMAC_CMN=y -CONFIG_BCMA_DRIVER_GPIO=y -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -CONFIG_MFD_AS3711=y -CONFIG_PMIC_ADP5520=y -CONFIG_MFD_AAT2870_CORE=y -CONFIG_MFD_BCM590XX=m -CONFIG_MFD_BD9571MWV=m -CONFIG_MFD_AXP20X=m -CONFIG_MFD_AXP20X_I2C=m -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_CHARDEV=m -CONFIG_MFD_MADERA=m -CONFIG_MFD_MADERA_I2C=m -CONFIG_MFD_MADERA_SPI=m -# CONFIG_MFD_CS47L35 is not set -# CONFIG_MFD_CS47L85 is not set -# CONFIG_MFD_CS47L90 is not set -CONFIG_PMIC_DA903X=y -CONFIG_PMIC_DA9052=y -CONFIG_MFD_DA9052_SPI=y -CONFIG_MFD_DA9052_I2C=y -CONFIG_MFD_DA9055=y -CONFIG_MFD_DA9062=m -CONFIG_MFD_DA9063=y -CONFIG_MFD_DA9150=m -CONFIG_MFD_DLN2=m -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_SPI=m -CONFIG_MFD_MC13XXX_I2C=m -CONFIG_HTC_PASIC3=m -CONFIG_HTC_I2CPLD=y -CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m -CONFIG_LPC_ICH=m -CONFIG_LPC_SCH=m -CONFIG_INTEL_SOC_PMIC=y -CONFIG_INTEL_SOC_PMIC_BXTWC=m -CONFIG_INTEL_SOC_PMIC_CHTWC=y -CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m -CONFIG_MFD_INTEL_LPSS=m -CONFIG_MFD_INTEL_LPSS_ACPI=m -CONFIG_MFD_INTEL_LPSS_PCI=m -CONFIG_MFD_JANZ_CMODIO=m -CONFIG_MFD_KEMPLD=m -CONFIG_MFD_88PM800=m -CONFIG_MFD_88PM805=m -CONFIG_MFD_88PM860X=y -CONFIG_MFD_MAX14577=y -CONFIG_MFD_MAX77693=y -CONFIG_MFD_MAX77843=y -CONFIG_MFD_MAX8907=m -CONFIG_MFD_MAX8925=y -CONFIG_MFD_MAX8997=y -CONFIG_MFD_MAX8998=y -CONFIG_MFD_MT6397=m -CONFIG_MFD_MENF21BMC=m -CONFIG_EZX_PCAP=y -CONFIG_MFD_VIPERBOARD=m -CONFIG_MFD_RETU=m -CONFIG_MFD_PCF50633=m -CONFIG_PCF50633_ADC=m -CONFIG_PCF50633_GPIO=m -CONFIG_UCB1400_CORE=m -CONFIG_MFD_RDC321X=m -CONFIG_MFD_RT5033=m -CONFIG_MFD_RC5T583=y -CONFIG_MFD_SEC_CORE=y -CONFIG_MFD_SI476X_CORE=m -CONFIG_MFD_SM501=m -CONFIG_MFD_SM501_GPIO=y -CONFIG_MFD_SKY81452=m -CONFIG_MFD_SMSC=y -CONFIG_ABX500_CORE=y -CONFIG_AB3100_CORE=y -CONFIG_AB3100_OTP=m -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -CONFIG_MFD_LP3943=m -CONFIG_MFD_LP8788=y -CONFIG_MFD_TI_LMU=m -CONFIG_MFD_PALMAS=y -CONFIG_TPS6105X=m -CONFIG_TPS65010=m -CONFIG_TPS6507X=m -CONFIG_MFD_TPS65086=m -CONFIG_MFD_TPS65090=y -# CONFIG_MFD_TPS68470 is not set -CONFIG_MFD_TI_LP873X=m -CONFIG_MFD_TPS6586X=y -CONFIG_MFD_TPS65910=y -CONFIG_MFD_TPS65912=y -CONFIG_MFD_TPS65912_I2C=y -CONFIG_MFD_TPS65912_SPI=y -CONFIG_MFD_TPS80031=y -CONFIG_TWL4030_CORE=y -CONFIG_MFD_TWL4030_AUDIO=y -CONFIG_TWL6040_CORE=y -CONFIG_MFD_WL1273_CORE=m -CONFIG_MFD_LM3533=m -CONFIG_MFD_TQMX86=m -CONFIG_MFD_VX855=m -CONFIG_MFD_ARIZONA=y -CONFIG_MFD_ARIZONA_I2C=m -CONFIG_MFD_ARIZONA_SPI=m -CONFIG_MFD_CS47L24=y -CONFIG_MFD_WM5102=y -CONFIG_MFD_WM5110=y -CONFIG_MFD_WM8997=y -CONFIG_MFD_WM8998=y -CONFIG_MFD_WM8400=y -CONFIG_MFD_WM831X=y -CONFIG_MFD_WM831X_I2C=y -CONFIG_MFD_WM831X_SPI=y -CONFIG_MFD_WM8350=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_MFD_WM8994=m -CONFIG_RAVE_SP_CORE=m -# end of Multifunction device drivers - -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -CONFIG_REGULATOR_VIRTUAL_CONSUMER=m -CONFIG_REGULATOR_USERSPACE_CONSUMER=m -CONFIG_REGULATOR_88PG86X=m -CONFIG_REGULATOR_88PM800=m -CONFIG_REGULATOR_88PM8607=m -CONFIG_REGULATOR_ACT8865=m -CONFIG_REGULATOR_AD5398=m -CONFIG_REGULATOR_ANATOP=m -CONFIG_REGULATOR_AAT2870=m -CONFIG_REGULATOR_AB3100=m -CONFIG_REGULATOR_ARIZONA_LDO1=m -CONFIG_REGULATOR_ARIZONA_MICSUPP=m -CONFIG_REGULATOR_AS3711=m -CONFIG_REGULATOR_AXP20X=m -CONFIG_REGULATOR_BCM590XX=m -CONFIG_REGULATOR_BD9571MWV=m -CONFIG_REGULATOR_DA903X=m -CONFIG_REGULATOR_DA9052=m -CONFIG_REGULATOR_DA9055=m -CONFIG_REGULATOR_DA9062=m -CONFIG_REGULATOR_DA9063=m -CONFIG_REGULATOR_DA9210=m -CONFIG_REGULATOR_DA9211=m -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_ISL9305=m -CONFIG_REGULATOR_ISL6271A=m -CONFIG_REGULATOR_LM363X=m -CONFIG_REGULATOR_LP3971=m -CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=m -CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LP8788=m -CONFIG_REGULATOR_LTC3589=m -CONFIG_REGULATOR_LTC3676=m -CONFIG_REGULATOR_MAX14577=m -CONFIG_REGULATOR_MAX1586=m -CONFIG_REGULATOR_MAX8649=m -CONFIG_REGULATOR_MAX8660=m -CONFIG_REGULATOR_MAX8907=m -CONFIG_REGULATOR_MAX8925=m -CONFIG_REGULATOR_MAX8952=m -CONFIG_REGULATOR_MAX8997=m -CONFIG_REGULATOR_MAX8998=m -CONFIG_REGULATOR_MAX77693=m -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -CONFIG_REGULATOR_MT6311=m -CONFIG_REGULATOR_MT6323=m -CONFIG_REGULATOR_MT6397=m -CONFIG_REGULATOR_PALMAS=m -CONFIG_REGULATOR_PCAP=m -CONFIG_REGULATOR_PCF50633=m -CONFIG_REGULATOR_PFUZE100=m -CONFIG_REGULATOR_PV88060=m -CONFIG_REGULATOR_PV88080=m -CONFIG_REGULATOR_PV88090=m -CONFIG_REGULATOR_PWM=m -CONFIG_REGULATOR_QCOM_SPMI=m -CONFIG_REGULATOR_RC5T583=m -CONFIG_REGULATOR_RT5033=m -CONFIG_REGULATOR_S2MPA01=m -CONFIG_REGULATOR_S2MPS11=m -CONFIG_REGULATOR_S5M8767=m -CONFIG_REGULATOR_SKY81452=m -CONFIG_REGULATOR_TPS51632=m -CONFIG_REGULATOR_TPS6105X=m -CONFIG_REGULATOR_TPS62360=m -CONFIG_REGULATOR_TPS65023=m -CONFIG_REGULATOR_TPS6507X=m -CONFIG_REGULATOR_TPS65086=m -CONFIG_REGULATOR_TPS65090=m -CONFIG_REGULATOR_TPS65132=m -CONFIG_REGULATOR_TPS6524X=m -CONFIG_REGULATOR_TPS6586X=m -CONFIG_REGULATOR_TPS65910=m -CONFIG_REGULATOR_TPS65912=m -CONFIG_REGULATOR_TPS80031=m -CONFIG_REGULATOR_TWL4030=m -CONFIG_REGULATOR_WM831X=m -CONFIG_REGULATOR_WM8350=m -CONFIG_REGULATOR_WM8400=m -CONFIG_REGULATOR_WM8994=m -CONFIG_CEC_CORE=m -CONFIG_CEC_NOTIFIER=y -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_LIRC=y -CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_IR_IMON_DECODER=m -CONFIG_IR_RCMM_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -CONFIG_IR_IMON=m -CONFIG_IR_IMON_RAW=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_ITE_CIR=m -CONFIG_IR_FINTEK=m -CONFIG_IR_NUVOTON=m -CONFIG_IR_REDRAT3=m -CONFIG_IR_STREAMZAP=m -CONFIG_IR_WINBOND_CIR=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -CONFIG_IR_SERIAL=m -CONFIG_IR_SERIAL_TRANSMITTER=y -CONFIG_IR_SIR=m -CONFIG_RC_XBOX_DVD=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y -# CONFIG_MEDIA_CONTROLLER_REQUEST_API is not set -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=m -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_V4L2_FLASH_LED_CLASS=m -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_DVB_CORE=m -# CONFIG_DVB_MMAP is not set -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -CONFIG_DVB_DYNAMIC_MINORS=y -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set -# CONFIG_DVB_ULE_DEBUG is not set - -# -# Media drivers -# -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -CONFIG_DVB_USB_ZD1301=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_MEYE=m -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW5864=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_TW686X=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -CONFIG_VIDEO_CX25821=m -CONFIG_VIDEO_CX25821_ALSA=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -CONFIG_VIDEO_SAA7134_GO7007=m -CONFIG_VIDEO_SAA7164=m -CONFIG_VIDEO_COBALT=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set -CONFIG_DVB_SMIPCIE=m -CONFIG_DVB_NETUP_UNIDVB=m -CONFIG_VIDEO_IPU3_CIO2=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_VIA_CAMERA=m -CONFIG_VIDEO_CADENCE=y -CONFIG_VIDEO_CADENCE_CSI2RX=m -CONFIG_VIDEO_CADENCE_CSI2TX=m -CONFIG_VIDEO_ASPEED=m -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m -CONFIG_VIDEO_SH_VEU=m -CONFIG_V4L_TEST_DRIVERS=y -# CONFIG_VIDEO_VIMC is not set -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_CEC=y -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -CONFIG_VIDEO_VIM2M=m -CONFIG_VIDEO_VICODEC=m -CONFIG_DVB_PLATFORM_DRIVERS=y -CONFIG_CEC_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CROS_EC_CEC=m -CONFIG_VIDEO_SECO_CEC=m -# CONFIG_VIDEO_SECO_RC is not set -CONFIG_SDR_PLATFORM_DRIVERS=y - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -CONFIG_RADIO_SI470X=m -CONFIG_USB_SI470X=m -CONFIG_I2C_SI470X=m -CONFIG_RADIO_SI4713=m -CONFIG_USB_SI4713=m -CONFIG_PLATFORM_SI4713=m -CONFIG_I2C_SI4713=m -CONFIG_RADIO_SI476X=m -CONFIG_USB_MR800=m -CONFIG_USB_DSBR=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -CONFIG_RADIO_TEA5764=m -CONFIG_RADIO_SAA7706H=m -CONFIG_RADIO_TEF6862=m -CONFIG_RADIO_WL1273=m - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m -# end of Texas Instruments WL128x FM driver (ST based) - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_V4L2=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -CONFIG_SMS_SIANO_DEBUGFS=y -CONFIG_VIDEO_V4L2_TPG=m - -# -# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS3308=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m -CONFIG_VIDEO_SONY_BTF_MPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_ADV7604=m -CONFIG_VIDEO_ADV7842=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_ADV7511=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_MT9V011=m - -# -# Lens drivers -# - -# -# Flash devices -# - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# SDR tuner chips -# - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_M52790=m - -# -# Media SPI Adapters -# -CONFIG_CXD2880_SPI_DRV=m -# end of Media SPI Adapters - -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m -CONFIG_MEDIA_TUNER_QM1D1B0004=m - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV0910=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_STV6111=m -CONFIG_DVB_MXL5XX=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_CXD2841ER=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBH25=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m -CONFIG_DVB_HORUS3A=m -CONFIG_DVB_ASCOT2E=m -CONFIG_DVB_HELENE=m - -# -# Common Interface (EN50221) controller drivers -# -CONFIG_DVB_CXD2099=m -CONFIG_DVB_SP2=m - -# -# Tools to develop new frontends -# -CONFIG_DVB_DUMMY_FE=m - -# -# Graphics support -# -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -CONFIG_AGP_SIS=m -CONFIG_AGP_VIA=y -CONFIG_INTEL_GTT=y -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_VGA_SWITCHEROO=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DSI=y -# CONFIG_DRM_DP_AUX_CHARDEV is not set -# CONFIG_DRM_DEBUG_SELFTEST is not set -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -# CONFIG_DRM_DP_CEC is not set -CONFIG_DRM_TTM=m -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_SCHED=m - -# -# I2C encoder or helper chips -# -CONFIG_DRM_I2C_CH7006=m -CONFIG_DRM_I2C_SIL164=m -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_I2C_NXP_TDA9950=m -# end of I2C encoder or helper chips - -# -# ARM devices -# -# end of ARM devices - -CONFIG_DRM_RADEON=m -# CONFIG_DRM_RADEON_USERPTR is not set -CONFIG_DRM_AMDGPU=m -# CONFIG_DRM_AMDGPU_SI is not set -# CONFIG_DRM_AMDGPU_CIK is not set -CONFIG_DRM_AMDGPU_USERPTR=y -# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set - -# -# ACP (Audio CoProcessor) Configuration -# -# CONFIG_DRM_AMD_ACP is not set -# end of ACP (Audio CoProcessor) Configuration - -# -# Display Engine Configuration -# -CONFIG_DRM_AMD_DC=y -CONFIG_DRM_AMD_DC_DCN1_0=y -CONFIG_DRM_AMD_DC_DCN1_01=y -# CONFIG_DEBUG_KERNEL_DC is not set -# end of Display Engine Configuration - -# CONFIG_HSA_AMD is not set -CONFIG_DRM_NOUVEAU=m -# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -# CONFIG_NOUVEAU_DEBUG_MMU is not set -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -# CONFIG_DRM_NOUVEAU_SVM is not set -CONFIG_DRM_I915=m -# CONFIG_DRM_I915_ALPHA_SUPPORT is not set -CONFIG_DRM_I915_CAPTURE_ERROR=y -CONFIG_DRM_I915_COMPRESS_ERROR=y -CONFIG_DRM_I915_USERPTR=y -# CONFIG_DRM_I915_GVT is not set - -# -# drm/i915 Debugging -# -# CONFIG_DRM_I915_WERROR is not set -# CONFIG_DRM_I915_DEBUG is not set -# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set -# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set -# CONFIG_DRM_I915_DEBUG_GUC is not set -# CONFIG_DRM_I915_SELFTEST is not set -# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set -# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set -# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set -# end of drm/i915 Debugging - -CONFIG_DRM_VGEM=m -# CONFIG_DRM_VKMS is not set -CONFIG_DRM_VMWGFX=m -CONFIG_DRM_VMWGFX_FBCON=y -CONFIG_DRM_GMA500=m -CONFIG_DRM_GMA600=y -CONFIG_DRM_GMA3600=y -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -# CONFIG_DRM_MGAG200 is not set -CONFIG_DRM_CIRRUS_QEMU=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set -# end of Display Panels - -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_PANEL_BRIDGE=y - -# -# Display Interface Bridges -# -CONFIG_DRM_ANALOGIX_ANX78XX=m -# end of Display Interface Bridges - -# CONFIG_DRM_ETNAVIV is not set -CONFIG_DRM_HISI_HIBMC=m -# CONFIG_DRM_TINYDRM is not set -CONFIG_DRM_XEN=y -CONFIG_DRM_XEN_FRONTEND=m -CONFIG_DRM_VBOXVIDEO=m -# CONFIG_DRM_LEGACY is not set -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y - -# -# Frame buffer Devices -# -CONFIG_FB_CMDLINE=y -CONFIG_FB_NOTIFY=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_DDC=m -CONFIG_FB_BOOT_VESA_SUPPORT=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SYS_FILLRECT=m -CONFIG_FB_SYS_COPYAREA=m -CONFIG_FB_SYS_IMAGEBLIT=m -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=m -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_HECUBA=m -CONFIG_FB_SVGALIB=m -CONFIG_FB_BACKLIGHT=m -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -CONFIG_FB_CIRRUS=m -CONFIG_FB_PM2=m -CONFIG_FB_PM2_FIFO_DISCONNECT=y -CONFIG_FB_CYBER2000=m -CONFIG_FB_CYBER2000_DDC=y -CONFIG_FB_ARC=m -CONFIG_FB_ASILIANT=y -CONFIG_FB_IMSTT=y -CONFIG_FB_VGA16=m -CONFIG_FB_UVESA=m -CONFIG_FB_VESA=y -CONFIG_FB_EFI=y -CONFIG_FB_N411=m -CONFIG_FB_HGA=m -CONFIG_FB_OPENCORES=m -CONFIG_FB_S1D13XXX=m -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=m -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -CONFIG_FB_I740=m -CONFIG_FB_LE80578=m -CONFIG_FB_CARILLO_RANCH=m -CONFIG_FB_INTEL=m -# CONFIG_FB_INTEL_DEBUG is not set -CONFIG_FB_INTEL_I2C=y -CONFIG_FB_MATROX=m -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -CONFIG_FB_MATROX_I2C=m -CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_RADEON=m -CONFIG_FB_RADEON_I2C=y -CONFIG_FB_RADEON_BACKLIGHT=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=m -CONFIG_FB_ATY128_BACKLIGHT=y -CONFIG_FB_ATY=m -CONFIG_FB_ATY_CT=y -# CONFIG_FB_ATY_GENERIC_LCD is not set -CONFIG_FB_ATY_GX=y -CONFIG_FB_ATY_BACKLIGHT=y -CONFIG_FB_S3=m -CONFIG_FB_S3_DDC=y -CONFIG_FB_SAVAGE=m -CONFIG_FB_SAVAGE_I2C=y -# CONFIG_FB_SAVAGE_ACCEL is not set -CONFIG_FB_SIS=m -CONFIG_FB_SIS_300=y -CONFIG_FB_SIS_315=y -CONFIG_FB_VIA=m -# CONFIG_FB_VIA_DIRECT_PROCFS is not set -CONFIG_FB_VIA_X_COMPATIBILITY=y -CONFIG_FB_NEOMAGIC=m -CONFIG_FB_KYRO=m -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -# CONFIG_FB_3DFX_I2C is not set -CONFIG_FB_VOODOO1=m -CONFIG_FB_VT8623=m -CONFIG_FB_TRIDENT=m -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -CONFIG_FB_CARMINE=m -CONFIG_FB_CARMINE_DRAM_EVAL=y -# CONFIG_CARMINE_DRAM_CUSTOM is not set -CONFIG_FB_SM501=m -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -CONFIG_FB_IBM_GXT4500=m -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=m -CONFIG_FB_METRONOME=m -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_HYPERV=m -CONFIG_FB_SIMPLE=y -CONFIG_FB_SM712=m -# end of Frame buffer Devices - -# -# Backlight & LCD device support -# -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_L4F00242T03=m -CONFIG_LCD_LMS283GF05=m -CONFIG_LCD_LTV350QV=m -CONFIG_LCD_ILI922X=m -CONFIG_LCD_ILI9320=m -CONFIG_LCD_TDO24M=m -CONFIG_LCD_VGG2432A4=m -CONFIG_LCD_PLATFORM=m -CONFIG_LCD_AMS369FG06=m -CONFIG_LCD_LMS501KF03=m -CONFIG_LCD_HX8357=m -CONFIG_LCD_OTM3225A=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_LM3533=m -CONFIG_BACKLIGHT_CARILLO_RANCH=m -CONFIG_BACKLIGHT_PWM=m -CONFIG_BACKLIGHT_DA903X=m -CONFIG_BACKLIGHT_DA9052=m -CONFIG_BACKLIGHT_MAX8925=m -CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_PM8941_WLED=m -CONFIG_BACKLIGHT_SAHARA=m -CONFIG_BACKLIGHT_WM831X=m -CONFIG_BACKLIGHT_ADP5520=m -CONFIG_BACKLIGHT_ADP8860=m -CONFIG_BACKLIGHT_ADP8870=m -CONFIG_BACKLIGHT_88PM860X=m -CONFIG_BACKLIGHT_PCF50633=m -CONFIG_BACKLIGHT_AAT2870=m -CONFIG_BACKLIGHT_LM3630A=m -CONFIG_BACKLIGHT_LM3639=m -CONFIG_BACKLIGHT_LP855X=m -CONFIG_BACKLIGHT_LP8788=m -CONFIG_BACKLIGHT_PANDORA=m -CONFIG_BACKLIGHT_SKY81452=m -CONFIG_BACKLIGHT_AS3711=m -CONFIG_BACKLIGHT_GPIO=m -CONFIG_BACKLIGHT_LV5207LP=m -CONFIG_BACKLIGHT_BD6107=m -CONFIG_BACKLIGHT_ARCXCNN=m -CONFIG_BACKLIGHT_RAVE_SP=m -# end of Backlight & LCD device support - -CONFIG_VGASTATE=m -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set -# end of Console display driver support - -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -# end of Graphics support - -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_SEQ_DEVICE=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_COMPRESS_OFFLOAD=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_DMA_SGBUF=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -# CONFIG_SND_SEQUENCER_OSS is not set -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_SEQ_MIDI_EVENT=m -CONFIG_SND_SEQ_MIDI=m -CONFIG_SND_SEQ_MIDI_EMUL=m -CONFIG_SND_SEQ_VIRMIDI=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_VX_LIB=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -CONFIG_SND_PCSP=m -CONFIG_SND_DUMMY=m -CONFIG_SND_ALOOP=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_MTS64=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_SB_COMMON=m -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS4000=m -CONFIG_SND_ASIHPI=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AW2=m -CONFIG_SND_BT87X=m -# CONFIG_SND_BT87X_OVERCLOCK is not set -CONFIG_SND_CA0106=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -CONFIG_SND_CS4281=m -CONFIG_SND_CS46XX=m -CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X_BOOL=y -CONFIG_SND_HDSP=m -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1724=m -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_KORG1212=m -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -CONFIG_SND_RME32=m -CONFIG_SND_RME96=m -CONFIG_SND_RME9652=m -CONFIG_SND_VIA82XX=m -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VIRTUOSO=m -CONFIG_SND_VX222=m -CONFIG_SND_YMFPCI=m - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -CONFIG_SND_HDA_INPUT_BEEP=y -CONFIG_SND_HDA_INPUT_BEEP_MODE=0 -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -# end of HD-Audio - -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_COMPONENT=y -CONFIG_SND_HDA_I915=y -CONFIG_SND_HDA_EXT_CORE=m -CONFIG_SND_HDA_PREALLOC_SIZE=64 -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_USX2Y=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_US122L=m -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -CONFIG_SND_FIREWIRE_MOTU=m -CONFIG_SND_FIREFACE=m -CONFIG_SND_PCMCIA=y -CONFIG_SND_VXPOCKET=m -CONFIG_SND_PDAUDIOCF=m -CONFIG_SND_SOC=m -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -CONFIG_SND_SOC_COMPRESS=y -CONFIG_SND_SOC_TOPOLOGY=y -CONFIG_SND_SOC_ACPI=m -CONFIG_SND_SOC_AMD_ACP=m -CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m -CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m -CONFIG_SND_SOC_AMD_ACP3x=m -CONFIG_SND_ATMEL_SOC=m -CONFIG_SND_DESIGNWARE_I2S=m -# CONFIG_SND_DESIGNWARE_PCM is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -CONFIG_SND_SOC_FSL_ASRC=m -CONFIG_SND_SOC_FSL_SAI=m -CONFIG_SND_SOC_FSL_AUDMIX=m -CONFIG_SND_SOC_FSL_SSI=m -CONFIG_SND_SOC_FSL_SPDIF=m -CONFIG_SND_SOC_FSL_ESAI=m -CONFIG_SND_SOC_FSL_MICFIL=m -CONFIG_SND_SOC_IMX_AUDMUX=m -# end of SoC Audio for Freescale CPUs - -CONFIG_SND_I2S_HI6210_I2S=m -# CONFIG_SND_SOC_IMG is not set -CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y -CONFIG_SND_SST_IPC=m -CONFIG_SND_SST_IPC_PCI=m -CONFIG_SND_SST_IPC_ACPI=m -CONFIG_SND_SOC_INTEL_SST_ACPI=m -CONFIG_SND_SOC_INTEL_SST=m -CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m -CONFIG_SND_SOC_INTEL_HASWELL=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m -CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m -CONFIG_SND_SOC_INTEL_SKYLAKE=m -CONFIG_SND_SOC_INTEL_SKL=m -CONFIG_SND_SOC_INTEL_APL=m -CONFIG_SND_SOC_INTEL_KBL=m -CONFIG_SND_SOC_INTEL_GLK=m -CONFIG_SND_SOC_INTEL_CNL=m -CONFIG_SND_SOC_INTEL_CFL=m -CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m -CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m -CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y -CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m -CONFIG_SND_SOC_ACPI_INTEL_MATCH=m -CONFIG_SND_SOC_INTEL_MACH=y -CONFIG_SND_SOC_INTEL_HASWELL_MACH=m -CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m -CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m -CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m -CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m -CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m -CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m -CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m -CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m -CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m -CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m -CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m -CONFIG_SND_SOC_MTK_BTCVSD=m -CONFIG_SND_SOC_SOF_TOPLEVEL=y -CONFIG_SND_SOC_SOF_PCI=m -CONFIG_SND_SOC_SOF_ACPI=m -CONFIG_SND_SOC_SOF_OPTIONS=m -# CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT is not set -# CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS is not set -# CONFIG_SND_SOC_SOF_DEBUG is not set -CONFIG_SND_SOC_SOF=m -CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y -CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y -CONFIG_SND_SOC_SOF_INTEL_ACPI=m -CONFIG_SND_SOC_SOF_INTEL_PCI=m -CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m -CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m -CONFIG_SND_SOC_SOF_INTEL_COMMON=m -CONFIG_SND_SOC_SOF_BAYTRAIL_SUPPORT=y -CONFIG_SND_SOC_SOF_BAYTRAIL=m -CONFIG_SND_SOC_SOF_BROADWELL_SUPPORT=y -CONFIG_SND_SOC_SOF_BROADWELL=m -CONFIG_SND_SOC_SOF_MERRIFIELD_SUPPORT=y -CONFIG_SND_SOC_SOF_MERRIFIELD=m -CONFIG_SND_SOC_SOF_APOLLOLAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_APOLLOLAKE=m -CONFIG_SND_SOC_SOF_GEMINILAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_GEMINILAKE=m -CONFIG_SND_SOC_SOF_CANNONLAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_CANNONLAKE=m -CONFIG_SND_SOC_SOF_COFFEELAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_COFFEELAKE=m -CONFIG_SND_SOC_SOF_ICELAKE_SUPPORT=y -CONFIG_SND_SOC_SOF_ICELAKE=m -CONFIG_SND_SOC_SOF_HDA_COMMON=m -CONFIG_SND_SOC_SOF_HDA_LINK=y -CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y -CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m -CONFIG_SND_SOC_SOF_HDA=m -CONFIG_SND_SOC_SOF_XTENSA=m - -# -# STMicroelectronics STM32 SOC audio support -# -# end of STMicroelectronics STM32 SOC audio support - -CONFIG_SND_SOC_XILINX_I2S=m -# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set -# CONFIG_SND_SOC_XILINX_SPDIF is not set -CONFIG_SND_SOC_XTFPGA_I2S=m -CONFIG_ZX_TDM=m -CONFIG_SND_SOC_I2C_AND_SPI=m - -# -# CODEC drivers -# -CONFIG_SND_SOC_AC97_CODEC=m -CONFIG_SND_SOC_ADAU_UTILS=m -CONFIG_SND_SOC_ADAU1701=m -CONFIG_SND_SOC_ADAU17X1=m -CONFIG_SND_SOC_ADAU1761=m -CONFIG_SND_SOC_ADAU1761_I2C=m -CONFIG_SND_SOC_ADAU1761_SPI=m -CONFIG_SND_SOC_ADAU7002=m -CONFIG_SND_SOC_AK4104=m -CONFIG_SND_SOC_AK4118=m -CONFIG_SND_SOC_AK4458=m -CONFIG_SND_SOC_AK4554=m -CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_AK4642=m -CONFIG_SND_SOC_AK5386=m -CONFIG_SND_SOC_AK5558=m -CONFIG_SND_SOC_ALC5623=m -CONFIG_SND_SOC_BD28623=m -CONFIG_SND_SOC_BT_SCO=m -CONFIG_SND_SOC_CROS_EC_CODEC=m -CONFIG_SND_SOC_CS35L32=m -CONFIG_SND_SOC_CS35L33=m -CONFIG_SND_SOC_CS35L34=m -CONFIG_SND_SOC_CS35L35=m -CONFIG_SND_SOC_CS35L36=m -CONFIG_SND_SOC_CS42L42=m -CONFIG_SND_SOC_CS42L51=m -CONFIG_SND_SOC_CS42L51_I2C=m -CONFIG_SND_SOC_CS42L52=m -CONFIG_SND_SOC_CS42L56=m -CONFIG_SND_SOC_CS42L73=m -CONFIG_SND_SOC_CS4265=m -CONFIG_SND_SOC_CS4270=m -CONFIG_SND_SOC_CS4271=m -CONFIG_SND_SOC_CS4271_I2C=m -CONFIG_SND_SOC_CS4271_SPI=m -CONFIG_SND_SOC_CS42XX8=m -CONFIG_SND_SOC_CS42XX8_I2C=m -CONFIG_SND_SOC_CS43130=m -CONFIG_SND_SOC_CS4341=m -CONFIG_SND_SOC_CS4349=m -CONFIG_SND_SOC_CS53L30=m -CONFIG_SND_SOC_DA7213=m -CONFIG_SND_SOC_DA7219=m -CONFIG_SND_SOC_DMIC=m -CONFIG_SND_SOC_HDMI_CODEC=m -CONFIG_SND_SOC_ES7134=m -CONFIG_SND_SOC_ES7241=m -CONFIG_SND_SOC_ES8316=m -CONFIG_SND_SOC_ES8328=m -CONFIG_SND_SOC_ES8328_I2C=m -CONFIG_SND_SOC_ES8328_SPI=m -CONFIG_SND_SOC_GTM601=m -CONFIG_SND_SOC_HDAC_HDMI=m -CONFIG_SND_SOC_HDAC_HDA=m -CONFIG_SND_SOC_INNO_RK3036=m -CONFIG_SND_SOC_MAX98088=m -CONFIG_SND_SOC_MAX98090=m -CONFIG_SND_SOC_MAX98357A=m -CONFIG_SND_SOC_MAX98504=m -CONFIG_SND_SOC_MAX9867=m -CONFIG_SND_SOC_MAX98927=m -CONFIG_SND_SOC_MAX98373=m -CONFIG_SND_SOC_MAX9860=m -CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m -CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m -CONFIG_SND_SOC_PCM1681=m -CONFIG_SND_SOC_PCM1789=m -CONFIG_SND_SOC_PCM1789_I2C=m -CONFIG_SND_SOC_PCM179X=m -CONFIG_SND_SOC_PCM179X_I2C=m -CONFIG_SND_SOC_PCM179X_SPI=m -CONFIG_SND_SOC_PCM186X=m -CONFIG_SND_SOC_PCM186X_I2C=m -CONFIG_SND_SOC_PCM186X_SPI=m -CONFIG_SND_SOC_PCM3060=m -CONFIG_SND_SOC_PCM3060_I2C=m -CONFIG_SND_SOC_PCM3060_SPI=m -CONFIG_SND_SOC_PCM3168A=m -CONFIG_SND_SOC_PCM3168A_I2C=m -CONFIG_SND_SOC_PCM3168A_SPI=m -CONFIG_SND_SOC_PCM512x=m -CONFIG_SND_SOC_PCM512x_I2C=m -CONFIG_SND_SOC_PCM512x_SPI=m -# CONFIG_SND_SOC_RK3328 is not set -CONFIG_SND_SOC_RL6231=m -CONFIG_SND_SOC_RL6347A=m -CONFIG_SND_SOC_RT286=m -CONFIG_SND_SOC_RT298=m -CONFIG_SND_SOC_RT5514=m -CONFIG_SND_SOC_RT5514_SPI=m -CONFIG_SND_SOC_RT5616=m -CONFIG_SND_SOC_RT5631=m -CONFIG_SND_SOC_RT5640=m -CONFIG_SND_SOC_RT5645=m -CONFIG_SND_SOC_RT5651=m -CONFIG_SND_SOC_RT5660=m -CONFIG_SND_SOC_RT5663=m -CONFIG_SND_SOC_RT5670=m -CONFIG_SND_SOC_RT5677=m -CONFIG_SND_SOC_RT5677_SPI=m -CONFIG_SND_SOC_RT5682=m -CONFIG_SND_SOC_SGTL5000=m -CONFIG_SND_SOC_SI476X=m -CONFIG_SND_SOC_SIGMADSP=m -CONFIG_SND_SOC_SIGMADSP_I2C=m -CONFIG_SND_SOC_SIGMADSP_REGMAP=m -CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m -CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m -CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SOC_SSM2305=m -CONFIG_SND_SOC_SSM2602=m -CONFIG_SND_SOC_SSM2602_SPI=m -CONFIG_SND_SOC_SSM2602_I2C=m -CONFIG_SND_SOC_SSM4567=m -CONFIG_SND_SOC_STA32X=m -CONFIG_SND_SOC_STA350=m -CONFIG_SND_SOC_STI_SAS=m -CONFIG_SND_SOC_TAS2552=m -CONFIG_SND_SOC_TAS5086=m -CONFIG_SND_SOC_TAS571X=m -CONFIG_SND_SOC_TAS5720=m -CONFIG_SND_SOC_TAS6424=m -CONFIG_SND_SOC_TDA7419=m -CONFIG_SND_SOC_TFA9879=m -CONFIG_SND_SOC_TLV320AIC23=m -CONFIG_SND_SOC_TLV320AIC23_I2C=m -CONFIG_SND_SOC_TLV320AIC23_SPI=m -CONFIG_SND_SOC_TLV320AIC31XX=m -CONFIG_SND_SOC_TLV320AIC32X4=m -CONFIG_SND_SOC_TLV320AIC32X4_I2C=m -CONFIG_SND_SOC_TLV320AIC32X4_SPI=m -CONFIG_SND_SOC_TLV320AIC3X=m -CONFIG_SND_SOC_TS3A227E=m -CONFIG_SND_SOC_TSCS42XX=m -CONFIG_SND_SOC_TSCS454=m -CONFIG_SND_SOC_WM8510=m -CONFIG_SND_SOC_WM8523=m -CONFIG_SND_SOC_WM8524=m -CONFIG_SND_SOC_WM8580=m -CONFIG_SND_SOC_WM8711=m -CONFIG_SND_SOC_WM8728=m -CONFIG_SND_SOC_WM8731=m -CONFIG_SND_SOC_WM8737=m -CONFIG_SND_SOC_WM8741=m -CONFIG_SND_SOC_WM8750=m -CONFIG_SND_SOC_WM8753=m -CONFIG_SND_SOC_WM8770=m -CONFIG_SND_SOC_WM8776=m -CONFIG_SND_SOC_WM8782=m -CONFIG_SND_SOC_WM8804=m -CONFIG_SND_SOC_WM8804_I2C=m -CONFIG_SND_SOC_WM8804_SPI=m -CONFIG_SND_SOC_WM8903=m -CONFIG_SND_SOC_WM8904=m -CONFIG_SND_SOC_WM8960=m -CONFIG_SND_SOC_WM8962=m -CONFIG_SND_SOC_WM8974=m -CONFIG_SND_SOC_WM8978=m -CONFIG_SND_SOC_WM8985=m -CONFIG_SND_SOC_ZX_AUD96P22=m -CONFIG_SND_SOC_MAX9759=m -CONFIG_SND_SOC_MT6351=m -CONFIG_SND_SOC_MT6358=m -CONFIG_SND_SOC_NAU8540=m -CONFIG_SND_SOC_NAU8810=m -CONFIG_SND_SOC_NAU8822=m -CONFIG_SND_SOC_NAU8824=m -CONFIG_SND_SOC_NAU8825=m -CONFIG_SND_SOC_TPA6130A2=m -# end of CODEC drivers - -CONFIG_SND_SIMPLE_CARD_UTILS=m -CONFIG_SND_SIMPLE_CARD=m -CONFIG_SND_X86=y -CONFIG_HDMI_LPE_AUDIO=m -CONFIG_SND_XEN_FRONTEND=m -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -CONFIG_HID_ACCUTOUCH=m -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -CONFIG_HID_APPLEIR=m -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -CONFIG_HID_BIGBEN_FF=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_COUGAR=m -CONFIG_HID_MACALLY=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -CONFIG_HID_ELAN=m -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -CONFIG_HID_GFRM=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_GOOGLE_HAMMER=m -CONFIG_HID_GT683R=m -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -CONFIG_HID_VIEWSONIC=m -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -CONFIG_HID_ITE=m -CONFIG_HID_JABRA=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MALTRON=m -CONFIG_HID_MAYFLASH=m -CONFIG_HID_REDRAGON=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -CONFIG_HID_NTI=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LCD=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -CONFIG_HID_RETRODE=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -CONFIG_HID_STEAM=m -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_HYPERV_MOUSE=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_UDRAW_PS3=m -CONFIG_HID_U2FZERO=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m -# end of Special HID drivers - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -# end of USB HID Boot Protocol drivers -# end of USB HID support - -# -# I2C HID support -# -CONFIG_I2C_HID=m -# end of I2C HID support - -# -# Intel ISH HID support -# -CONFIG_INTEL_ISH_HID=m -# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set -# end of Intel ISH HID support -# end of HID support - -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -CONFIG_USB_PCI=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -CONFIG_USB_DYNAMIC_MINORS=y -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_LEDS_TRIGGER_USBPORT=m -CONFIG_USB_AUTOSUSPEND_DELAY=2 -CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_C67X00_HCD=m -CONFIG_USB_XHCI_HCD=y -# CONFIG_USB_XHCI_DBGCAP is not set -CONFIG_USB_XHCI_PCI=y -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=y -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_FOTG210_HCD=m -CONFIG_USB_MAX3421_HCD=m -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -CONFIG_USB_SL811_HCD_ISO=y -CONFIG_USB_SL811_CS=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m -CONFIG_USB_HCD_BCMA=m -CONFIG_USB_HCD_SSB=m -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=8 -CONFIG_USBIP_VHCI_NR_HCS=1 -CONFIG_USBIP_HOST=m -CONFIG_USBIP_VUDC=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_MUSB_HDRC=m -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_GADGET is not set -CONFIG_USB_MUSB_DUAL_ROLE=y - -# -# Platform Glue Layer -# - -# -# MUSB DMA mode -# -CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_DWC3=m -CONFIG_USB_DWC3_ULPI=y -# CONFIG_USB_DWC3_HOST is not set -# CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -CONFIG_USB_DWC3_HAPS=m -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -CONFIG_USB_DWC2_PCI=m -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set -CONFIG_USB_CHIPIDEA=m -CONFIG_USB_CHIPIDEA_PCI=m -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1761_UDC=y -# CONFIG_USB_ISP1760_HOST_ROLE is not set -# CONFIG_USB_ISP1760_GADGET_ROLE is not set -CONFIG_USB_ISP1760_DUAL_ROLE=y - -# -# USB port drivers -# -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -CONFIG_USB_SERIAL_F8153X=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -CONFIG_USB_SERIAL_UPD78F0730=m -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -# CONFIG_USB_SISUSBVGA_CON is not set -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -CONFIG_USB_EHSET_TEST_FIXTURE=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -CONFIG_USB_HUB_USB251XB=m -CONFIG_USB_HSIC_USB3503=m -CONFIG_USB_HSIC_USB4604=m -CONFIG_USB_LINK_LAYER_TEST=m -CONFIG_USB_CHAOSKEY=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=m -CONFIG_USB_GPIO_VBUS=m -CONFIG_TAHVO_USB=m -CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y -CONFIG_USB_ISP1301=m -# end of USB Physical Layer drivers - -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set - -# -# USB Peripheral Controller -# -CONFIG_USB_FOTG210_UDC=m -CONFIG_USB_GR_UDC=m -CONFIG_USB_R8A66597=m -CONFIG_USB_PXA27X=m -CONFIG_USB_MV_UDC=m -CONFIG_USB_MV_U3D=m -CONFIG_USB_SNP_CORE=m -# CONFIG_USB_M66592 is not set -CONFIG_USB_BDC_UDC=m - -# -# Platform Support -# -CONFIG_USB_BDC_PCI=m -CONFIG_USB_AMD5536UDC=m -CONFIG_USB_NET2272=m -CONFIG_USB_NET2272_DMA=y -CONFIG_USB_NET2280=m -CONFIG_USB_GOKU=m -CONFIG_USB_EG20T=m -# CONFIG_USB_DUMMY_HCD is not set -# end of USB Peripheral Controller - -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UAC2=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_F_TCM=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -CONFIG_USB_CONFIGFS_F_UAC1=y -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -CONFIG_USB_CONFIGFS_F_UAC2=y -CONFIG_USB_CONFIGFS_F_MIDI=y -CONFIG_USB_CONFIGFS_F_HID=y -CONFIG_USB_CONFIGFS_F_UVC=y -CONFIG_USB_CONFIGFS_F_PRINTER=y -# CONFIG_USB_CONFIGFS_F_TCM is not set -CONFIG_USB_ZERO=m -CONFIG_USB_AUDIO=m -CONFIG_GADGET_UAC1=y -# CONFIG_GADGET_UAC1_LEGACY is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_G_NCM=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -CONFIG_USB_FUNCTIONFS_GENERIC=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_GADGET_TARGET=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_NOKIA=m -CONFIG_USB_G_ACM_MS=m -# CONFIG_USB_G_MULTI is not set -CONFIG_USB_G_HID=m -CONFIG_USB_G_DBGP=m -# CONFIG_USB_G_DBGP_PRINTK is not set -CONFIG_USB_G_DBGP_SERIAL=y -CONFIG_USB_G_WEBCAM=m -CONFIG_TYPEC=m -CONFIG_TYPEC_TCPM=m -CONFIG_TYPEC_TCPCI=m -CONFIG_TYPEC_RT1711H=m -CONFIG_TYPEC_FUSB302=m -CONFIG_TYPEC_UCSI=m -CONFIG_UCSI_CCG=m -CONFIG_UCSI_ACPI=m -CONFIG_TYPEC_TPS6598X=m - -# -# USB Type-C Multiplexer/DeMultiplexer Switch support -# -CONFIG_TYPEC_MUX_PI3USB30532=m -# end of USB Type-C Multiplexer/DeMultiplexer Switch support - -# -# USB Type-C Alternate Mode drivers -# -CONFIG_TYPEC_DP_ALTMODE=m -CONFIG_TYPEC_NVIDIA_ALTMODE=m -# end of USB Type-C Alternate Mode drivers - -CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_ROLES_INTEL_XHCI=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m -CONFIG_MMC=y -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_SDHCI_F_SDH30=m -CONFIG_MMC_WBSD=m -CONFIG_MMC_ALCOR=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SPI=m -CONFIG_MMC_SDRICOH_CS=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_USDHI6ROL0=m -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_CQHCI=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_MTK=m -CONFIG_MMC_SDHCI_XENON=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -CONFIG_MS_BLOCK=m - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=m -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -CONFIG_LEDS_88PM860X=m -CONFIG_LEDS_APU=m -CONFIG_LEDS_AS3645A=m -CONFIG_LEDS_LM3530=m -CONFIG_LEDS_LM3532=m -CONFIG_LEDS_LM3533=m -CONFIG_LEDS_LM3642=m -CONFIG_LEDS_LM3601X=m -CONFIG_LEDS_MT6323=m -CONFIG_LEDS_PCA9532=m -CONFIG_LEDS_PCA9532_GPIO=y -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -CONFIG_LEDS_LP3952=m -CONFIG_LEDS_LP55XX_COMMON=m -CONFIG_LEDS_LP5521=m -CONFIG_LEDS_LP5523=m -CONFIG_LEDS_LP5562=m -CONFIG_LEDS_LP8501=m -CONFIG_LEDS_LP8788=m -CONFIG_LEDS_CLEVO_MAIL=m -CONFIG_LEDS_PCA955X=m -# CONFIG_LEDS_PCA955X_GPIO is not set -CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_WM831X_STATUS=m -CONFIG_LEDS_WM8350=m -CONFIG_LEDS_DA903X=m -CONFIG_LEDS_DA9052=m -CONFIG_LEDS_DAC124S085=m -CONFIG_LEDS_PWM=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_INTEL_SS4200=m -CONFIG_LEDS_ADP5520=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_TCA6507=m -CONFIG_LEDS_TLC591XX=m -CONFIG_LEDS_MAX8997=m -CONFIG_LEDS_LM355x=m -CONFIG_LEDS_MENF21BMC=m - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -CONFIG_LEDS_BLINKM=m -CONFIG_LEDS_MLXCPLD=m -CONFIG_LEDS_MLXREG=m -CONFIG_LEDS_USER=m -CONFIG_LEDS_NIC78BX=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_DISK=y -# CONFIG_LEDS_TRIGGER_MTD is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_ACTIVITY=m -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LEDS_TRIGGER_NETDEV=m -CONFIG_LEDS_TRIGGER_PATTERN=m -CONFIG_LEDS_TRIGGER_AUDIO=m -# CONFIG_ACCESSIBILITY is not set -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_QIB=m -CONFIG_INFINIBAND_QIB_DCA=y -CONFIG_INFINIBAND_CXGB3=m -CONFIG_INFINIBAND_CXGB4=m -CONFIG_INFINIBAND_EFA=m -CONFIG_INFINIBAND_I40IW=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_INFINIBAND_VMWARE_PVRDMA=m -CONFIG_INFINIBAND_USNIC=m -CONFIG_INFINIBAND_BNXT_RE=m -CONFIG_INFINIBAND_HFI1=m -# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set -# CONFIG_SDMA_VERBOSITY is not set -CONFIG_INFINIBAND_QEDR=m -CONFIG_INFINIBAND_RDMAVT=m -CONFIG_RDMA_RXE=m -CONFIG_INFINIBAND_IPOIB=m -CONFIG_INFINIBAND_IPOIB_CM=y -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_INFINIBAND_OPA_VNIC=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -# CONFIG_EDAC_LEGACY_SYSFS is not set -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_DECODE_MCE=m -CONFIG_EDAC_GHES=y -CONFIG_EDAC_AMD64=m -# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set -CONFIG_EDAC_E752X=m -CONFIG_EDAC_I82975X=m -CONFIG_EDAC_I3000=m -CONFIG_EDAC_I3200=m -CONFIG_EDAC_IE31200=m -CONFIG_EDAC_X38=m -CONFIG_EDAC_I5400=m -CONFIG_EDAC_I7CORE=m -CONFIG_EDAC_I5000=m -CONFIG_EDAC_I5100=m -CONFIG_EDAC_I7300=m -CONFIG_EDAC_SBRIDGE=m -CONFIG_EDAC_SKX=m -CONFIG_EDAC_I10NM=m -CONFIG_EDAC_PND2=m -CONFIG_RTC_LIB=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_SYSTOHC_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set -CONFIG_RTC_NVMEM=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_88PM860X=m -CONFIG_RTC_DRV_88PM80X=m -CONFIG_RTC_DRV_ABB5ZES3=m -CONFIG_RTC_DRV_ABEOZ9=m -CONFIG_RTC_DRV_ABX80X=m -CONFIG_RTC_DRV_DS1307=m -# CONFIG_RTC_DRV_DS1307_CENTURY is not set -CONFIG_RTC_DRV_DS1374=m -CONFIG_RTC_DRV_DS1374_WDT=y -CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_LP8788=m -CONFIG_RTC_DRV_MAX6900=m -CONFIG_RTC_DRV_MAX8907=m -CONFIG_RTC_DRV_MAX8925=m -CONFIG_RTC_DRV_MAX8998=m -CONFIG_RTC_DRV_MAX8997=m -CONFIG_RTC_DRV_RS5C372=m -CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_ISL12022=m -CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF8523=m -CONFIG_RTC_DRV_PCF85063=m -CONFIG_RTC_DRV_PCF85363=m -CONFIG_RTC_DRV_PCF8563=m -CONFIG_RTC_DRV_PCF8583=m -CONFIG_RTC_DRV_M41T80=m -CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_PALMAS=m -CONFIG_RTC_DRV_TPS6586X=m -CONFIG_RTC_DRV_TPS65910=m -CONFIG_RTC_DRV_TPS80031=m -CONFIG_RTC_DRV_RC5T583=m -CONFIG_RTC_DRV_S35390A=m -CONFIG_RTC_DRV_FM3130=m -CONFIG_RTC_DRV_RX8010=m -CONFIG_RTC_DRV_RX8581=m -CONFIG_RTC_DRV_RX8025=m -CONFIG_RTC_DRV_EM3027=m -CONFIG_RTC_DRV_RV3028=m -CONFIG_RTC_DRV_RV8803=m -CONFIG_RTC_DRV_S5M=m -CONFIG_RTC_DRV_SD3078=m - -# -# SPI RTC drivers -# -CONFIG_RTC_DRV_M41T93=m -CONFIG_RTC_DRV_M41T94=m -CONFIG_RTC_DRV_DS1302=m -CONFIG_RTC_DRV_DS1305=m -CONFIG_RTC_DRV_DS1343=m -CONFIG_RTC_DRV_DS1347=m -CONFIG_RTC_DRV_DS1390=m -CONFIG_RTC_DRV_MAX6916=m -CONFIG_RTC_DRV_R9701=m -CONFIG_RTC_DRV_RX4581=m -CONFIG_RTC_DRV_RX6110=m -CONFIG_RTC_DRV_RS5C348=m -CONFIG_RTC_DRV_MAX6902=m -CONFIG_RTC_DRV_PCF2123=m -CONFIG_RTC_DRV_MCP795=m -CONFIG_RTC_I2C_AND_SPI=y - -# -# SPI and I2C RTC drivers -# -CONFIG_RTC_DRV_DS3232=m -CONFIG_RTC_DRV_DS3232_HWMON=y -CONFIG_RTC_DRV_PCF2127=m -CONFIG_RTC_DRV_RV3029C2=m -CONFIG_RTC_DRV_RV3029_HWMON=y - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_DS1286=m -CONFIG_RTC_DRV_DS1511=m -CONFIG_RTC_DRV_DS1553=m -CONFIG_RTC_DRV_DS1685_FAMILY=m -CONFIG_RTC_DRV_DS1685=y -# CONFIG_RTC_DRV_DS1689 is not set -# CONFIG_RTC_DRV_DS17285 is not set -# CONFIG_RTC_DRV_DS17485 is not set -# CONFIG_RTC_DRV_DS17885 is not set -CONFIG_RTC_DRV_DS1742=m -CONFIG_RTC_DRV_DS2404=m -CONFIG_RTC_DRV_DA9052=m -CONFIG_RTC_DRV_DA9055=m -CONFIG_RTC_DRV_DA9063=m -CONFIG_RTC_DRV_STK17TA8=m -CONFIG_RTC_DRV_M48T86=m -CONFIG_RTC_DRV_M48T35=m -CONFIG_RTC_DRV_M48T59=m -CONFIG_RTC_DRV_MSM6242=m -CONFIG_RTC_DRV_BQ4802=m -CONFIG_RTC_DRV_RP5C01=m -CONFIG_RTC_DRV_V3020=m -CONFIG_RTC_DRV_WM831X=m -CONFIG_RTC_DRV_WM8350=m -CONFIG_RTC_DRV_PCF50633=m -CONFIG_RTC_DRV_AB3100=m -CONFIG_RTC_DRV_CROS_EC=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_FTRTC010=m -CONFIG_RTC_DRV_PCAP=m -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_MT6397=m - -# -# HID Sensor RTC drivers -# -CONFIG_RTC_DRV_HID_SENSOR_TIME=m -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=m -CONFIG_DMA_ACPI=y -CONFIG_ALTERA_MSGDMA=m -CONFIG_INTEL_IDMA64=m -CONFIG_INTEL_IOATDMA=m -CONFIG_INTEL_MIC_X100_DMA=m -CONFIG_QCOM_HIDMA_MGMT=m -CONFIG_QCOM_HIDMA=m -CONFIG_DW_DMAC_CORE=m -CONFIG_DW_DMAC=m -CONFIG_DW_DMAC_PCI=m -CONFIG_HSU_DMA=m - -# -# DMA Clients -# -CONFIG_ASYNC_TX_DMA=y -# CONFIG_DMATEST is not set -CONFIG_DMA_ENGINE_RAID=y - -# -# DMABUF options -# -CONFIG_SYNC_FILE=y -# CONFIG_SW_SYNC is not set -# CONFIG_UDMABUF is not set -# end of DMABUF options - -CONFIG_DCA=m -CONFIG_AUXDISPLAY=y -CONFIG_HD44780=m -CONFIG_KS0108=m -CONFIG_KS0108_PORT=0x378 -CONFIG_KS0108_DELAY=2 -CONFIG_CFAG12864B=m -CONFIG_CFAG12864B_RATE=20 -CONFIG_IMG_ASCII_LCD=m -CONFIG_PARPORT_PANEL=m -CONFIG_PANEL_PARPORT=0 -CONFIG_PANEL_PROFILE=5 -# CONFIG_PANEL_CHANGE_MESSAGE is not set -# CONFIG_CHARLCD_BL_OFF is not set -# CONFIG_CHARLCD_BL_ON is not set -CONFIG_CHARLCD_BL_FLASH=y -CONFIG_PANEL=m -CONFIG_CHARLCD=m -CONFIG_UIO=m -CONFIG_UIO_CIF=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_UIO_DMEM_GENIRQ=m -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -CONFIG_UIO_PRUSS=m -CONFIG_UIO_MF624=m -CONFIG_UIO_HV_GENERIC=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -CONFIG_VFIO_NOIOMMU=y -CONFIG_VFIO_PCI=m -CONFIG_VFIO_PCI_VGA=y -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -CONFIG_VFIO_PCI_IGD=y -CONFIG_VFIO_MDEV=m -CONFIG_VFIO_MDEV_DEVICE=m -CONFIG_IRQ_BYPASS_MANAGER=m -CONFIG_VIRT_DRIVERS=y -CONFIG_VBOXGUEST=m -CONFIG_VIRTIO=y -CONFIG_VIRTIO_MENU=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y - -# -# Microsoft Hyper-V guest support -# -CONFIG_HYPERV=m -CONFIG_HYPERV_TSCPAGE=y -CONFIG_HYPERV_UTILS=m -CONFIG_HYPERV_BALLOON=m -# end of Microsoft Hyper-V guest support - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SELFBALLOONING=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y -CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=512 -CONFIG_XEN_SCRUB_PAGES_DEFAULT=y -CONFIG_XEN_DEV_EVTCHN=m -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=m -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -# CONFIG_XEN_GRANT_DMA_ALLOC is not set -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_TMEM=m -CONFIG_XEN_PCIDEV_BACKEND=m -CONFIG_XEN_PVCALLS_FRONTEND=m -# CONFIG_XEN_PVCALLS_BACKEND is not set -CONFIG_XEN_SCSI_BACKEND=m -CONFIG_XEN_PRIVCMD=m -CONFIG_XEN_ACPI_PROCESSOR=y -CONFIG_XEN_MCE_LOG=y -CONFIG_XEN_HAVE_PVMMU=y -CONFIG_XEN_EFI=y -CONFIG_XEN_AUTO_XLATE=y -CONFIG_XEN_ACPI=y -CONFIG_XEN_SYMS=y -CONFIG_XEN_HAVE_VPMU=y -CONFIG_XEN_FRONT_PGDIR_SHBUF=m -# end of Xen driver support - -CONFIG_STAGING=y -CONFIG_PRISM2_USB=m -CONFIG_COMEDI=m -# CONFIG_COMEDI_DEBUG is not set -CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048 -CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480 -CONFIG_COMEDI_MISC_DRIVERS=y -CONFIG_COMEDI_BOND=m -CONFIG_COMEDI_TEST=m -CONFIG_COMEDI_PARPORT=m -CONFIG_COMEDI_ISA_DRIVERS=y -CONFIG_COMEDI_PCL711=m -CONFIG_COMEDI_PCL724=m -CONFIG_COMEDI_PCL726=m -CONFIG_COMEDI_PCL730=m -CONFIG_COMEDI_PCL812=m -CONFIG_COMEDI_PCL816=m -CONFIG_COMEDI_PCL818=m -CONFIG_COMEDI_PCM3724=m -CONFIG_COMEDI_AMPLC_DIO200_ISA=m -CONFIG_COMEDI_AMPLC_PC236_ISA=m -CONFIG_COMEDI_AMPLC_PC263_ISA=m -CONFIG_COMEDI_RTI800=m -CONFIG_COMEDI_RTI802=m -CONFIG_COMEDI_DAC02=m -CONFIG_COMEDI_DAS16M1=m -CONFIG_COMEDI_DAS08_ISA=m -CONFIG_COMEDI_DAS16=m -CONFIG_COMEDI_DAS800=m -CONFIG_COMEDI_DAS1800=m -CONFIG_COMEDI_DAS6402=m -CONFIG_COMEDI_DT2801=m -CONFIG_COMEDI_DT2811=m -CONFIG_COMEDI_DT2814=m -CONFIG_COMEDI_DT2815=m -CONFIG_COMEDI_DT2817=m -CONFIG_COMEDI_DT282X=m -CONFIG_COMEDI_DMM32AT=m -CONFIG_COMEDI_FL512=m -CONFIG_COMEDI_AIO_AIO12_8=m -CONFIG_COMEDI_AIO_IIRO_16=m -CONFIG_COMEDI_II_PCI20KC=m -CONFIG_COMEDI_C6XDIGIO=m -CONFIG_COMEDI_MPC624=m -CONFIG_COMEDI_ADQ12B=m -CONFIG_COMEDI_NI_AT_A2150=m -CONFIG_COMEDI_NI_AT_AO=m -CONFIG_COMEDI_NI_ATMIO=m -CONFIG_COMEDI_NI_ATMIO16D=m -CONFIG_COMEDI_NI_LABPC_ISA=m -CONFIG_COMEDI_PCMAD=m -CONFIG_COMEDI_PCMDA12=m -CONFIG_COMEDI_PCMMIO=m -CONFIG_COMEDI_PCMUIO=m -CONFIG_COMEDI_MULTIQ3=m -CONFIG_COMEDI_S526=m -CONFIG_COMEDI_PCI_DRIVERS=m -CONFIG_COMEDI_8255_PCI=m -CONFIG_COMEDI_ADDI_WATCHDOG=m -CONFIG_COMEDI_ADDI_APCI_1032=m -CONFIG_COMEDI_ADDI_APCI_1500=m -CONFIG_COMEDI_ADDI_APCI_1516=m -CONFIG_COMEDI_ADDI_APCI_1564=m -CONFIG_COMEDI_ADDI_APCI_16XX=m -CONFIG_COMEDI_ADDI_APCI_2032=m -CONFIG_COMEDI_ADDI_APCI_2200=m -CONFIG_COMEDI_ADDI_APCI_3120=m -CONFIG_COMEDI_ADDI_APCI_3501=m -CONFIG_COMEDI_ADDI_APCI_3XXX=m -CONFIG_COMEDI_ADL_PCI6208=m -CONFIG_COMEDI_ADL_PCI7X3X=m -CONFIG_COMEDI_ADL_PCI8164=m -CONFIG_COMEDI_ADL_PCI9111=m -CONFIG_COMEDI_ADL_PCI9118=m -CONFIG_COMEDI_ADV_PCI1710=m -CONFIG_COMEDI_ADV_PCI1720=m -CONFIG_COMEDI_ADV_PCI1723=m -CONFIG_COMEDI_ADV_PCI1724=m -CONFIG_COMEDI_ADV_PCI1760=m -CONFIG_COMEDI_ADV_PCI_DIO=m -CONFIG_COMEDI_AMPLC_DIO200_PCI=m -CONFIG_COMEDI_AMPLC_PC236_PCI=m -CONFIG_COMEDI_AMPLC_PC263_PCI=m -CONFIG_COMEDI_AMPLC_PCI224=m -CONFIG_COMEDI_AMPLC_PCI230=m -CONFIG_COMEDI_CONTEC_PCI_DIO=m -CONFIG_COMEDI_DAS08_PCI=m -CONFIG_COMEDI_DT3000=m -CONFIG_COMEDI_DYNA_PCI10XX=m -CONFIG_COMEDI_GSC_HPDI=m -CONFIG_COMEDI_MF6X4=m -CONFIG_COMEDI_ICP_MULTI=m -CONFIG_COMEDI_DAQBOARD2000=m -CONFIG_COMEDI_JR3_PCI=m -CONFIG_COMEDI_KE_COUNTER=m -CONFIG_COMEDI_CB_PCIDAS64=m -CONFIG_COMEDI_CB_PCIDAS=m -CONFIG_COMEDI_CB_PCIDDA=m -CONFIG_COMEDI_CB_PCIMDAS=m -CONFIG_COMEDI_CB_PCIMDDA=m -CONFIG_COMEDI_ME4000=m -CONFIG_COMEDI_ME_DAQ=m -CONFIG_COMEDI_NI_6527=m -CONFIG_COMEDI_NI_65XX=m -CONFIG_COMEDI_NI_660X=m -CONFIG_COMEDI_NI_670X=m -CONFIG_COMEDI_NI_LABPC_PCI=m -CONFIG_COMEDI_NI_PCIDIO=m -CONFIG_COMEDI_NI_PCIMIO=m -CONFIG_COMEDI_RTD520=m -CONFIG_COMEDI_S626=m -CONFIG_COMEDI_MITE=m -CONFIG_COMEDI_NI_TIOCMD=m -CONFIG_COMEDI_PCMCIA_DRIVERS=m -CONFIG_COMEDI_CB_DAS16_CS=m -CONFIG_COMEDI_DAS08_CS=m -CONFIG_COMEDI_NI_DAQ_700_CS=m -CONFIG_COMEDI_NI_DAQ_DIO24_CS=m -CONFIG_COMEDI_NI_LABPC_CS=m -CONFIG_COMEDI_NI_MIO_CS=m -CONFIG_COMEDI_QUATECH_DAQP_CS=m -CONFIG_COMEDI_USB_DRIVERS=m -CONFIG_COMEDI_DT9812=m -CONFIG_COMEDI_NI_USB6501=m -CONFIG_COMEDI_USBDUX=m -CONFIG_COMEDI_USBDUXFAST=m -CONFIG_COMEDI_USBDUXSIGMA=m -CONFIG_COMEDI_VMK80XX=m -CONFIG_COMEDI_8254=m -CONFIG_COMEDI_8255=m -CONFIG_COMEDI_8255_SA=m -CONFIG_COMEDI_KCOMEDILIB=m -CONFIG_COMEDI_AMPLC_DIO200=m -CONFIG_COMEDI_AMPLC_PC236=m -CONFIG_COMEDI_DAS08=m -CONFIG_COMEDI_ISADMA=m -CONFIG_COMEDI_NI_LABPC=m -CONFIG_COMEDI_NI_LABPC_ISADMA=m -CONFIG_COMEDI_NI_TIO=m -CONFIG_COMEDI_NI_ROUTING=m -CONFIG_RTL8192U=m -CONFIG_RTLLIB=m -CONFIG_RTLLIB_CRYPTO_CCMP=m -CONFIG_RTLLIB_CRYPTO_TKIP=m -CONFIG_RTLLIB_CRYPTO_WEP=m -CONFIG_RTL8192E=m -CONFIG_RTL8723BS=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -CONFIG_RTS5208=m -CONFIG_VT6655=m -CONFIG_VT6656=m - -# -# IIO staging drivers -# - -# -# Accelerometers -# -CONFIG_ADIS16203=m -CONFIG_ADIS16240=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD7816=m -CONFIG_AD7192=m -CONFIG_AD7280=m -# end of Analog to digital converters - -# -# Analog digital bi-direction converters -# -CONFIG_ADT7316=m -CONFIG_ADT7316_SPI=m -CONFIG_ADT7316_I2C=m -# end of Analog digital bi-direction converters - -# -# Capacitance to digital converters -# -CONFIG_AD7150=m -CONFIG_AD7746=m -# end of Capacitance to digital converters - -# -# Direct Digital Synthesis -# -CONFIG_AD9832=m -CONFIG_AD9834=m -# end of Direct Digital Synthesis - -# -# Network Analyzer, Impedance Converters -# -CONFIG_AD5933=m -# end of Network Analyzer, Impedance Converters - -# -# Active energy metering IC -# -CONFIG_ADE7854=m -CONFIG_ADE7854_I2C=m -CONFIG_ADE7854_SPI=m -# end of Active energy metering IC - -# -# Resolver to digital converters -# -CONFIG_AD2S1210=m -# end of Resolver to digital converters -# end of IIO staging drivers - -CONFIG_FB_SM750=m - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -# end of Speakup console speech - -CONFIG_STAGING_MEDIA=y -CONFIG_I2C_BCM2048=m -CONFIG_VIDEO_IPU3_IMGU=m - -# -# soc_camera sensor drivers -# - -# -# Android -# -# end of Android - -CONFIG_LTE_GDM724X=m -CONFIG_FIREWIRE_SERIAL=m -CONFIG_FWTTY_MAX_TOTAL_PORTS=64 -CONFIG_FWTTY_MAX_CARD_PORTS=32 -CONFIG_GS_FPGABOOT=m -CONFIG_UNISYSSPAR=y -CONFIG_UNISYS_VISORNIC=m -CONFIG_UNISYS_VISORINPUT=m -CONFIG_UNISYS_VISORHBA=m -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_FB_FLEX=m -CONFIG_FB_TFT_FBTFT_DEVICE=m -CONFIG_WILC1000=m -CONFIG_WILC1000_SDIO=m -CONFIG_WILC1000_SPI=m -# CONFIG_WILC1000_HW_OOB_INTR is not set -CONFIG_MOST=m -CONFIG_MOST_CDEV=m -CONFIG_MOST_NET=m -CONFIG_MOST_SOUND=m -CONFIG_MOST_VIDEO=m -CONFIG_MOST_I2C=m -CONFIG_MOST_USB=m -CONFIG_KS7010=m -# CONFIG_GREYBUS is not set -# CONFIG_PI433 is not set - -# -# Gasket devices -# -CONFIG_STAGING_GASKET_FRAMEWORK=m -CONFIG_STAGING_APEX_DRIVER=m -# end of Gasket devices - -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set -CONFIG_FIELDBUS_DEV=m -# CONFIG_KPC2000 is not set -CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACER_WMI=m -CONFIG_ACER_WIRELESS=m -CONFIG_ACERHDF=m -CONFIG_ALIENWARE_WMI=m -CONFIG_ASUS_LAPTOP=m -CONFIG_DCDBAS=m -CONFIG_DELL_SMBIOS=m -CONFIG_DELL_SMBIOS_WMI=y -CONFIG_DELL_SMBIOS_SMM=y -CONFIG_DELL_LAPTOP=m -CONFIG_DELL_WMI=m -CONFIG_DELL_WMI_DESCRIPTOR=m -CONFIG_DELL_WMI_AIO=m -CONFIG_DELL_WMI_LED=m -CONFIG_DELL_SMO8800=m -CONFIG_DELL_RBTN=m -CONFIG_DELL_RBU=m -CONFIG_FUJITSU_LAPTOP=m -CONFIG_FUJITSU_TABLET=m -CONFIG_AMILO_RFKILL=m -CONFIG_GPD_POCKET_FAN=m -CONFIG_HP_ACCEL=m -CONFIG_HP_WIRELESS=m -CONFIG_HP_WMI=m -CONFIG_LG_LAPTOP=m -CONFIG_MSI_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y -CONFIG_IDEAPAD_LAPTOP=m -CONFIG_SURFACE3_WMI=m -CONFIG_THINKPAD_ACPI=m -CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y -CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y -# CONFIG_THINKPAD_ACPI_DEBUG is not set -# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set -CONFIG_THINKPAD_ACPI_VIDEO=y -CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_SENSORS_HDAPS=m -CONFIG_INTEL_MENLOW=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_ASUS_WMI=m -CONFIG_ASUS_NB_WMI=m -CONFIG_EEEPC_WMI=m -CONFIG_ASUS_WIRELESS=m -CONFIG_ACPI_WMI=m -CONFIG_WMI_BMOF=m -CONFIG_INTEL_WMI_THUNDERBOLT=m -CONFIG_MSI_WMI=m -CONFIG_PEAQ_WMI=m -CONFIG_TOPSTAR_LAPTOP=m -CONFIG_ACPI_TOSHIBA=m -CONFIG_TOSHIBA_BT_RFKILL=m -CONFIG_TOSHIBA_HAPS=m -CONFIG_TOSHIBA_WMI=m -CONFIG_INTEL_CHT_INT33FE=m -CONFIG_INTEL_INT0002_VGPIO=m -CONFIG_INTEL_HID_EVENT=m -CONFIG_INTEL_VBTN=m -CONFIG_INTEL_IPS=m -CONFIG_INTEL_PMC_CORE=y -CONFIG_IBM_RTL=m -CONFIG_SAMSUNG_LAPTOP=m -CONFIG_MXM_WMI=m -CONFIG_INTEL_OAKTRAIL=m -CONFIG_APPLE_GMUX=m -CONFIG_INTEL_RST=m -CONFIG_INTEL_SMARTCONNECT=m -CONFIG_INTEL_PMC_IPC=m -CONFIG_INTEL_BXTWC_PMIC_TMU=m -CONFIG_SURFACE_PRO3_BUTTON=m -CONFIG_SURFACE_3_BUTTON=m -CONFIG_INTEL_PUNIT_IPC=m -CONFIG_INTEL_TELEMETRY=m -# CONFIG_MLX_PLATFORM is not set -# CONFIG_INTEL_TURBO_MAX_3 is not set -# CONFIG_TOUCHSCREEN_DMI is not set -CONFIG_INTEL_CHTDC_TI_PWRBTN=m -CONFIG_I2C_MULTI_INSTANTIATE=m -CONFIG_INTEL_ATOMISP2_PM=m -CONFIG_HUAWEI_WMI=m -CONFIG_PCENGINES_APU2=m -CONFIG_PMC_ATOM=y -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_LAPTOP=m -CONFIG_CHROMEOS_PSTORE=m -CONFIG_CHROMEOS_TBMC=m -CONFIG_CROS_EC_I2C=m -CONFIG_CROS_EC_SPI=m -CONFIG_CROS_EC_LPC=m -# CONFIG_CROS_EC_LPC_MEC is not set -CONFIG_CROS_EC_PROTO=y -CONFIG_CROS_KBD_LED_BACKLIGHT=m -CONFIG_CROS_EC_LIGHTBAR=m -CONFIG_CROS_EC_DEBUGFS=m -CONFIG_CROS_EC_SYSFS=m -CONFIG_CROS_USBPD_LOGGER=m -# CONFIG_MELLANOX_PLATFORM is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_WM831X=m -CONFIG_COMMON_CLK_MAX9485=m -CONFIG_COMMON_CLK_SI5351=m -CONFIG_COMMON_CLK_SI544=m -CONFIG_COMMON_CLK_CDCE706=m -CONFIG_COMMON_CLK_CS2000_CP=m -CONFIG_COMMON_CLK_S2MPS11=m -CONFIG_CLK_TWL6040=m -CONFIG_COMMON_CLK_PALMAS=m -CONFIG_COMMON_CLK_PWM=m -# end of Common Clock Framework - -# CONFIG_HWSPINLOCK is not set - -# -# Clock Source drivers -# -CONFIG_CLKEVT_I8253=y -CONFIG_I8253_LOCK=y -CONFIG_CLKBLD_I8253=y -# end of Clock Source drivers - -CONFIG_MAILBOX=y -CONFIG_PCC=y -CONFIG_ALTERA_MBOX=m -CONFIG_IOMMU_IOVA=y -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -# end of Generic IOMMU Pagetable Support - -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_AMD_IOMMU=y -CONFIG_AMD_IOMMU_V2=m -CONFIG_DMAR_TABLE=y -CONFIG_INTEL_IOMMU=y -CONFIG_INTEL_IOMMU_SVM=y -# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set -CONFIG_INTEL_IOMMU_FLOPPY_WA=y -CONFIG_IRQ_REMAP=y -CONFIG_HYPERV_IOMMU=y - -# -# Remoteproc drivers -# -CONFIG_REMOTEPROC=m -# end of Remoteproc drivers - -# -# Rpmsg drivers -# -CONFIG_RPMSG=m -# CONFIG_RPMSG_CHAR is not set -CONFIG_RPMSG_QCOM_GLINK_NATIVE=m -CONFIG_RPMSG_QCOM_GLINK_RPM=m -CONFIG_RPMSG_VIRTIO=m -# end of Rpmsg drivers - -# CONFIG_SOUNDWIRE is not set - -# -# SOC (System On Chip) specific Drivers -# - -# -# Amlogic SoC drivers -# -# end of Amlogic SoC drivers - -# -# Aspeed SoC drivers -# -# end of Aspeed SoC drivers - -# -# Broadcom SoC drivers -# -# end of Broadcom SoC drivers - -# -# NXP/Freescale QorIQ SoC drivers -# -# end of NXP/Freescale QorIQ SoC drivers - -# -# i.MX SoC drivers -# -# end of i.MX SoC drivers - -# -# IXP4xx SoC drivers -# -# CONFIG_IXP4XX_QMGR is not set -# CONFIG_IXP4XX_NPE is not set -# end of IXP4xx SoC drivers - -# -# Qualcomm SoC drivers -# -# end of Qualcomm SoC drivers - -CONFIG_SOC_TI=y - -# -# Xilinx SoC drivers -# -CONFIG_XILINX_VCU=m -# end of Xilinx SoC drivers -# end of SOC (System On Chip) specific Drivers - -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y -CONFIG_DEVFREQ_GOV_PASSIVE=m - -# -# DEVFREQ Drivers -# -CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -CONFIG_EXTCON_ADC_JACK=m -CONFIG_EXTCON_ARIZONA=m -CONFIG_EXTCON_AXP288=m -CONFIG_EXTCON_GPIO=m -CONFIG_EXTCON_INTEL_INT3496=m -CONFIG_EXTCON_INTEL_CHT_WC=m -CONFIG_EXTCON_MAX14577=m -CONFIG_EXTCON_MAX3355=m -CONFIG_EXTCON_MAX77693=m -CONFIG_EXTCON_MAX77843=m -CONFIG_EXTCON_MAX8997=m -CONFIG_EXTCON_PALMAS=m -CONFIG_EXTCON_PTN5150=m -CONFIG_EXTCON_RT8973A=m -CONFIG_EXTCON_SM5502=m -CONFIG_EXTCON_USB_GPIO=m -CONFIG_EXTCON_USBC_CROS_EC=m -CONFIG_MEMORY=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=m -CONFIG_IIO_BUFFER_HW_CONSUMER=m -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -CONFIG_IIO_CONFIGFS=m -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -CONFIG_IIO_SW_DEVICE=m -CONFIG_IIO_SW_TRIGGER=m -CONFIG_IIO_TRIGGERED_EVENT=m - -# -# Accelerometers -# -CONFIG_ADIS16201=m -CONFIG_ADIS16209=m -CONFIG_ADXL372=m -CONFIG_ADXL372_SPI=m -CONFIG_ADXL372_I2C=m -CONFIG_BMA180=m -CONFIG_BMA220=m -CONFIG_BMC150_ACCEL=m -CONFIG_BMC150_ACCEL_I2C=m -CONFIG_BMC150_ACCEL_SPI=m -CONFIG_DA280=m -CONFIG_DA311=m -CONFIG_DMARD09=m -CONFIG_DMARD10=m -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m -CONFIG_KXSD9=m -CONFIG_KXSD9_SPI=m -CONFIG_KXSD9_I2C=m -CONFIG_KXCJK1013=m -CONFIG_MC3230=m -CONFIG_MMA7455=m -CONFIG_MMA7455_I2C=m -CONFIG_MMA7455_SPI=m -CONFIG_MMA7660=m -CONFIG_MMA8452=m -CONFIG_MMA9551_CORE=m -CONFIG_MMA9551=m -CONFIG_MMA9553=m -CONFIG_MXC4005=m -CONFIG_MXC6255=m -CONFIG_SCA3000=m -CONFIG_STK8312=m -CONFIG_STK8BA50=m -# end of Accelerometers - -# -# Analog to digital converters -# -CONFIG_AD_SIGMA_DELTA=m -CONFIG_AD7124=m -CONFIG_AD7266=m -CONFIG_AD7291=m -CONFIG_AD7298=m -CONFIG_AD7476=m -CONFIG_AD7606=m -CONFIG_AD7606_IFACE_PARALLEL=m -CONFIG_AD7606_IFACE_SPI=m -CONFIG_AD7766=m -CONFIG_AD7768_1=m -CONFIG_AD7780=m -CONFIG_AD7791=m -CONFIG_AD7793=m -CONFIG_AD7887=m -CONFIG_AD7923=m -CONFIG_AD7949=m -CONFIG_AD799X=m -CONFIG_AXP20X_ADC=m -CONFIG_AXP288_ADC=m -CONFIG_CC10001_ADC=m -CONFIG_DA9150_GPADC=m -CONFIG_DLN2_ADC=m -CONFIG_HI8435=m -CONFIG_HX711=m -CONFIG_INA2XX_ADC=m -CONFIG_LP8788_ADC=m -CONFIG_LTC2471=m -CONFIG_LTC2485=m -CONFIG_LTC2497=m -CONFIG_MAX1027=m -CONFIG_MAX11100=m -CONFIG_MAX1118=m -CONFIG_MAX1363=m -CONFIG_MAX9611=m -CONFIG_MCP320X=m -CONFIG_MCP3422=m -CONFIG_MCP3911=m -CONFIG_MEN_Z188_ADC=m -CONFIG_NAU7802=m -CONFIG_PALMAS_GPADC=m -CONFIG_QCOM_VADC_COMMON=m -CONFIG_QCOM_SPMI_IADC=m -CONFIG_QCOM_SPMI_VADC=m -CONFIG_QCOM_SPMI_ADC5=m -CONFIG_TI_ADC081C=m -CONFIG_TI_ADC0832=m -CONFIG_TI_ADC084S021=m -CONFIG_TI_ADC12138=m -CONFIG_TI_ADC108S102=m -CONFIG_TI_ADC128S052=m -CONFIG_TI_ADC161S626=m -CONFIG_TI_ADS1015=m -CONFIG_TI_ADS7950=m -CONFIG_TI_AM335X_ADC=m -CONFIG_TI_TLC4541=m -CONFIG_TWL4030_MADC=m -CONFIG_TWL6030_GPADC=m -CONFIG_VIPERBOARD_ADC=m -# end of Analog to digital converters - -# -# Analog Front Ends -# -# end of Analog Front Ends - -# -# Amplifiers -# -CONFIG_AD8366=m -# end of Amplifiers - -# -# Chemical Sensors -# -CONFIG_ATLAS_PH_SENSOR=m -CONFIG_BME680=m -CONFIG_BME680_I2C=m -CONFIG_BME680_SPI=m -CONFIG_CCS811=m -CONFIG_IAQCORE=m -CONFIG_PMS7003=m -CONFIG_SENSIRION_SGP30=m -CONFIG_SPS30=m -CONFIG_VZ89X=m -# end of Chemical Sensors - -CONFIG_IIO_CROS_EC_SENSORS_CORE=m -CONFIG_IIO_CROS_EC_SENSORS=m - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -# end of Hid Sensor IIO Common - -CONFIG_IIO_MS_SENSORS_I2C=m - -# -# SSP Sensor Common -# -CONFIG_IIO_SSP_SENSORS_COMMONS=m -CONFIG_IIO_SSP_SENSORHUB=m -# end of SSP Sensor Common - -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_SPI=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Digital to analog converters -# -CONFIG_AD5064=m -CONFIG_AD5360=m -CONFIG_AD5380=m -CONFIG_AD5421=m -CONFIG_AD5446=m -CONFIG_AD5449=m -CONFIG_AD5592R_BASE=m -CONFIG_AD5592R=m -CONFIG_AD5593R=m -CONFIG_AD5504=m -CONFIG_AD5624R_SPI=m -CONFIG_LTC1660=m -CONFIG_LTC2632=m -CONFIG_AD5686=m -CONFIG_AD5686_SPI=m -CONFIG_AD5696_I2C=m -CONFIG_AD5755=m -CONFIG_AD5758=m -CONFIG_AD5761=m -CONFIG_AD5764=m -CONFIG_AD5791=m -CONFIG_AD7303=m -CONFIG_AD8801=m -CONFIG_DS4424=m -CONFIG_M62332=m -CONFIG_MAX517=m -CONFIG_MCP4725=m -CONFIG_MCP4922=m -CONFIG_TI_DAC082S085=m -CONFIG_TI_DAC5571=m -CONFIG_TI_DAC7311=m -CONFIG_TI_DAC7612=m -# end of Digital to analog converters - -# -# IIO dummy driver -# -CONFIG_IIO_SIMPLE_DUMMY=m -# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set -# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set -# end of IIO dummy driver - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# -CONFIG_AD9523=m -# end of Clock Generator/Distribution - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# -CONFIG_ADF4350=m -# end of Phase-Locked Loop (PLL) frequency synthesizers -# end of Frequency Synthesizers DDS/PLL - -# -# Digital gyroscope sensors -# -CONFIG_ADIS16080=m -CONFIG_ADIS16130=m -CONFIG_ADIS16136=m -CONFIG_ADIS16260=m -CONFIG_ADXRS450=m -CONFIG_BMG160=m -CONFIG_BMG160_I2C=m -CONFIG_BMG160_SPI=m -CONFIG_FXAS21002C=m -CONFIG_FXAS21002C_I2C=m -CONFIG_FXAS21002C_SPI=m -CONFIG_HID_SENSOR_GYRO_3D=m -CONFIG_MPU3050=m -CONFIG_MPU3050_I2C=m -CONFIG_IIO_ST_GYRO_3AXIS=m -CONFIG_IIO_ST_GYRO_I2C_3AXIS=m -CONFIG_IIO_ST_GYRO_SPI_3AXIS=m -CONFIG_ITG3200=m -# end of Digital gyroscope sensors - -# -# Health Sensors -# - -# -# Heart Rate Monitors -# -CONFIG_AFE4403=m -CONFIG_AFE4404=m -CONFIG_MAX30100=m -CONFIG_MAX30102=m -# end of Heart Rate Monitors -# end of Health Sensors - -# -# Humidity sensors -# -CONFIG_AM2315=m -CONFIG_DHT11=m -CONFIG_HDC100X=m -CONFIG_HID_SENSOR_HUMIDITY=m -CONFIG_HTS221=m -CONFIG_HTS221_I2C=m -CONFIG_HTS221_SPI=m -CONFIG_HTU21=m -CONFIG_SI7005=m -CONFIG_SI7020=m -# end of Humidity sensors - -# -# Inertial measurement units -# -CONFIG_ADIS16400=m -CONFIG_ADIS16480=m -CONFIG_BMI160=m -CONFIG_BMI160_I2C=m -CONFIG_BMI160_SPI=m -CONFIG_KMX61=m -CONFIG_INV_MPU6050_IIO=m -CONFIG_INV_MPU6050_I2C=m -CONFIG_INV_MPU6050_SPI=m -CONFIG_IIO_ST_LSM6DSX=m -CONFIG_IIO_ST_LSM6DSX_I2C=m -CONFIG_IIO_ST_LSM6DSX_SPI=m -# end of Inertial measurement units - -CONFIG_IIO_ADIS_LIB=m -CONFIG_IIO_ADIS_LIB_BUFFER=y - -# -# Light sensors -# -CONFIG_ACPI_ALS=m -CONFIG_ADJD_S311=m -CONFIG_AL3320A=m -CONFIG_APDS9300=m -CONFIG_APDS9960=m -CONFIG_BH1750=m -CONFIG_BH1780=m -CONFIG_CM32181=m -CONFIG_CM3232=m -CONFIG_CM3323=m -CONFIG_CM36651=m -CONFIG_IIO_CROS_EC_LIGHT_PROX=m -CONFIG_GP2AP020A00F=m -CONFIG_SENSORS_ISL29018=m -CONFIG_SENSORS_ISL29028=m -CONFIG_ISL29125=m -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -CONFIG_JSA1212=m -CONFIG_RPR0521=m -CONFIG_SENSORS_LM3533=m -CONFIG_LTR501=m -CONFIG_LV0104CS=m -CONFIG_MAX44000=m -CONFIG_MAX44009=m -CONFIG_OPT3001=m -CONFIG_PA12203001=m -CONFIG_SI1133=m -CONFIG_SI1145=m -CONFIG_STK3310=m -CONFIG_ST_UVIS25=m -CONFIG_ST_UVIS25_I2C=m -CONFIG_ST_UVIS25_SPI=m -CONFIG_TCS3414=m -CONFIG_TCS3472=m -CONFIG_SENSORS_TSL2563=m -CONFIG_TSL2583=m -CONFIG_TSL2772=m -CONFIG_TSL4531=m -CONFIG_US5182D=m -CONFIG_VCNL4000=m -CONFIG_VCNL4035=m -CONFIG_VEML6070=m -CONFIG_VL6180=m -CONFIG_ZOPT2201=m -# end of Light sensors - -# -# Magnetometer sensors -# -CONFIG_AK8975=m -CONFIG_AK09911=m -CONFIG_BMC150_MAGN=m -CONFIG_BMC150_MAGN_I2C=m -CONFIG_BMC150_MAGN_SPI=m -CONFIG_MAG3110=m -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -CONFIG_MMC35240=m -CONFIG_IIO_ST_MAGN_3AXIS=m -CONFIG_IIO_ST_MAGN_I2C_3AXIS=m -CONFIG_IIO_ST_MAGN_SPI_3AXIS=m -CONFIG_SENSORS_HMC5843=m -CONFIG_SENSORS_HMC5843_I2C=m -CONFIG_SENSORS_HMC5843_SPI=m -CONFIG_SENSORS_RM3100=m -CONFIG_SENSORS_RM3100_I2C=m -CONFIG_SENSORS_RM3100_SPI=m -# end of Magnetometer sensors - -# -# Multiplexers -# -# end of Multiplexers - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m -# end of Inclinometer sensors - -# -# Triggers - standalone -# -CONFIG_IIO_HRTIMER_TRIGGER=m -CONFIG_IIO_INTERRUPT_TRIGGER=m -CONFIG_IIO_TIGHTLOOP_TRIGGER=m -CONFIG_IIO_SYSFS_TRIGGER=m -# end of Triggers - standalone - -# -# Digital potentiometers -# -CONFIG_AD5272=m -CONFIG_DS1803=m -CONFIG_MAX5481=m -CONFIG_MAX5487=m -CONFIG_MCP4018=m -CONFIG_MCP4131=m -CONFIG_MCP4531=m -CONFIG_MCP41010=m -CONFIG_TPL0102=m -# end of Digital potentiometers - -# -# Digital potentiostats -# -CONFIG_LMP91000=m -# end of Digital potentiostats - -# -# Pressure sensors -# -CONFIG_ABP060MG=m -CONFIG_BMP280=m -CONFIG_BMP280_I2C=m -CONFIG_BMP280_SPI=m -CONFIG_IIO_CROS_EC_BARO=m -CONFIG_HID_SENSOR_PRESS=m -CONFIG_HP03=m -CONFIG_MPL115=m -CONFIG_MPL115_I2C=m -CONFIG_MPL115_SPI=m -CONFIG_MPL3115=m -CONFIG_MS5611=m -CONFIG_MS5611_I2C=m -CONFIG_MS5611_SPI=m -CONFIG_MS5637=m -CONFIG_IIO_ST_PRESS=m -CONFIG_IIO_ST_PRESS_I2C=m -CONFIG_IIO_ST_PRESS_SPI=m -CONFIG_T5403=m -CONFIG_HP206C=m -CONFIG_ZPA2326=m -CONFIG_ZPA2326_I2C=m -CONFIG_ZPA2326_SPI=m -# end of Pressure sensors - -# -# Lightning sensors -# -CONFIG_AS3935=m -# end of Lightning sensors - -# -# Proximity and distance sensors -# -CONFIG_ISL29501=m -CONFIG_LIDAR_LITE_V2=m -CONFIG_MB1232=m -CONFIG_RFD77402=m -CONFIG_SRF04=m -CONFIG_SX9500=m -CONFIG_SRF08=m -CONFIG_VL53L0X_I2C=m -# end of Proximity and distance sensors - -# -# Resolver to digital converters -# -CONFIG_AD2S90=m -CONFIG_AD2S1200=m -# end of Resolver to digital converters - -# -# Temperature sensors -# -CONFIG_MAXIM_THERMOCOUPLE=m -CONFIG_HID_SENSOR_TEMP=m -CONFIG_MLX90614=m -CONFIG_MLX90632=m -CONFIG_TMP006=m -CONFIG_TMP007=m -CONFIG_TSYS01=m -CONFIG_TSYS02D=m -CONFIG_MAX31856=m -# end of Temperature sensors - -CONFIG_NTB=m -CONFIG_NTB_AMD=m -CONFIG_NTB_IDT=m -CONFIG_NTB_INTEL=m -CONFIG_NTB_SWITCHTEC=m -CONFIG_NTB_PINGPONG=m -CONFIG_NTB_TOOL=m -CONFIG_NTB_PERF=m -CONFIG_NTB_TRANSPORT=m -CONFIG_VME_BUS=y - -# -# VME Bridge Drivers -# -CONFIG_VME_CA91CX42=m -CONFIG_VME_TSI148=m -# CONFIG_VME_FAKE is not set - -# -# VME Board Drivers -# -CONFIG_VMIVME_7805=m - -# -# VME Device Drivers -# -CONFIG_VME_USER=m -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -CONFIG_PWM_CRC=y -CONFIG_PWM_CROS_EC=m -CONFIG_PWM_LP3943=m -CONFIG_PWM_LPSS=m -CONFIG_PWM_LPSS_PCI=m -CONFIG_PWM_LPSS_PLATFORM=m -CONFIG_PWM_PCA9685=m -CONFIG_PWM_TWL=m -CONFIG_PWM_TWL_LED=m - -# -# IRQ chip support -# -CONFIG_ARM_GIC_MAX_NR=1 -CONFIG_MADERA_IRQ=m -# end of IRQ chip support - -CONFIG_IPACK_BUS=m -CONFIG_BOARD_TPCI200=m -CONFIG_SERIAL_IPOCTAL=m -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_TI_SYSCON=m -CONFIG_FMC=m -CONFIG_FMC_FAKEDEV=m -CONFIG_FMC_TRIVIAL=m -CONFIG_FMC_WRITE_EEPROM=m -CONFIG_FMC_CHARDEV=m - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -CONFIG_BCM_KONA_USB2_PHY=m -CONFIG_PHY_PXA_28NM_HSIC=m -CONFIG_PHY_PXA_28NM_USB2=m -CONFIG_PHY_CPCAP_USB=m -CONFIG_PHY_QCOM_USB_HS=m -CONFIG_PHY_QCOM_USB_HSIC=m -CONFIG_PHY_SAMSUNG_USB2=m -CONFIG_PHY_TUSB1210=m -# end of PHY Subsystem - -CONFIG_POWERCAP=y -CONFIG_INTEL_RAPL=m -# CONFIG_IDLE_INJECT is not set -CONFIG_MCB=m -CONFIG_MCB_PCI=m -CONFIG_MCB_LPC=m - -# -# Performance monitor support -# -# end of Performance monitor support - -CONFIG_RAS=y -# CONFIG_RAS_CEC is not set -CONFIG_THUNDERBOLT=m - -# -# Android -# -# CONFIG_ANDROID is not set -# end of Android - -CONFIG_LIBNVDIMM=y -CONFIG_BLK_DEV_PMEM=m -CONFIG_ND_BLK=m -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=m -CONFIG_BTT=y -CONFIG_ND_PFN=m -CONFIG_NVDIMM_PFN=y -CONFIG_NVDIMM_DAX=y -CONFIG_NVDIMM_KEYS=y -CONFIG_DAX_DRIVER=y -CONFIG_DAX=y -CONFIG_DEV_DAX=m -CONFIG_DEV_DAX_PMEM=m -CONFIG_DEV_DAX_KMEM=m -CONFIG_DEV_DAX_PMEM_COMPAT=m -CONFIG_NVMEM=y -CONFIG_NVMEM_SYSFS=y -CONFIG_RAVE_SP_EEPROM=m - -# -# HW tracing support -# -CONFIG_STM=m -CONFIG_STM_PROTO_BASIC=m -CONFIG_STM_PROTO_SYS_T=m -CONFIG_STM_DUMMY=m -CONFIG_STM_SOURCE_CONSOLE=m -CONFIG_STM_SOURCE_HEARTBEAT=m -CONFIG_STM_SOURCE_FTRACE=m -CONFIG_INTEL_TH=m -CONFIG_INTEL_TH_PCI=m -CONFIG_INTEL_TH_ACPI=m -CONFIG_INTEL_TH_GTH=m -CONFIG_INTEL_TH_STH=m -CONFIG_INTEL_TH_MSU=m -CONFIG_INTEL_TH_PTI=m -# CONFIG_INTEL_TH_DEBUG is not set -# end of HW tracing support - -CONFIG_FPGA=m -CONFIG_ALTERA_PR_IP_CORE=m -CONFIG_FPGA_MGR_ALTERA_PS_SPI=m -CONFIG_FPGA_MGR_ALTERA_CVP=m -CONFIG_FPGA_MGR_XILINX_SPI=m -CONFIG_FPGA_MGR_MACHXO2_SPI=m -CONFIG_FPGA_BRIDGE=m -CONFIG_ALTERA_FREEZE_BRIDGE=m -CONFIG_XILINX_PR_DECOUPLER=m -CONFIG_FPGA_REGION=m -CONFIG_FPGA_DFL=m -CONFIG_FPGA_DFL_FME=m -CONFIG_FPGA_DFL_FME_MGR=m -CONFIG_FPGA_DFL_FME_BRIDGE=m -CONFIG_FPGA_DFL_FME_REGION=m -CONFIG_FPGA_DFL_AFU=m -CONFIG_FPGA_DFL_PCI=m -CONFIG_PM_OPP=y -CONFIG_UNISYS_VISORBUS=m -# CONFIG_SIOX is not set -# CONFIG_SLIMBUS is not set -# CONFIG_INTERCONNECT is not set -CONFIG_COUNTER=m -# end of Device Drivers - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_VALIDATE_FS_PARSER=y -CONFIG_FS_IOMAP=y -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -CONFIG_EXT4_FS=y -CONFIG_EXT4_USE_FOR_EXT2=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -# CONFIG_BTRFS_FS_REF_VERIFY is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set -CONFIG_FS_DAX=y -CONFIG_FS_DAX_PMD=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -# CONFIG_EXPORTFS_BLOCK_OPS is not set -CONFIG_FILE_LOCKING=y -CONFIG_MANDATORY_FILE_LOCKING=y -# CONFIG_FS_ENCRYPTION is not set -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_QUOTACTL_COMPAT=y -CONFIG_AUTOFS4_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_FUSE_FS=y -CONFIG_CUSE=m -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set -# CONFIG_OVERLAY_FS_INDEX is not set -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -# CONFIG_OVERLAY_FS_METACOPY is not set - -# -# Caches -# -CONFIG_FSCACHE=m -CONFIG_FSCACHE_STATS=y -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set -# end of Caches - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -# end of CD-ROM/DVD Filesystems - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_FAT_DEFAULT_UTF8 is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set -# end of DOS/FAT/NT Filesystems - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_VMCORE=y -# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_MEMFD_CREATE=y -CONFIG_ARCH_HAS_GIGANTIC_PAGE=y -CONFIG_CONFIGFS_FS=m -CONFIG_EFIVAR_FS=y -# end of Pseudo filesystems - -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ORANGEFS_FS=m -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=y -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_JFFS2_CMODE_NONE is not set -# CONFIG_JFFS2_CMODE_PRIORITY is not set -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_UBIFS_FS=m -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_ATIME_SUPPORT=y -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UBIFS_FS_AUTHENTICATION=y -CONFIG_CRAMFS=m -CONFIG_CRAMFS_BLOCKDEV=y -# CONFIG_CRAMFS_MTD is not set -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_ZSTD is not set -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=m -CONFIG_ROMFS_BACKED_BY_BLOCK=y -# CONFIG_ROMFS_BACKED_BY_MTD is not set -# CONFIG_ROMFS_BACKED_BY_BOTH is not set -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_PSTORE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=m -# CONFIG_PSTORE_LZO_COMPRESS is not set -# CONFIG_PSTORE_LZ4_COMPRESS is not set -# CONFIG_PSTORE_LZ4HC_COMPRESS is not set -# CONFIG_PSTORE_842_COMPRESS is not set -# CONFIG_PSTORE_ZSTD_COMPRESS is not set -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -# CONFIG_PSTORE_CONSOLE is not set -# CONFIG_PSTORE_PMSG is not set -# CONFIG_PSTORE_FTRACE is not set -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V2=m -CONFIG_NFS_V3=m -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=m -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=m -CONFIG_PNFS_BLOCK=m -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -CONFIG_NFS_V4_1_MIGRATION=y -CONFIG_NFS_V4_SECURITY_LABEL=y -CONFIG_NFS_FSCACHE=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFS_DEBUG=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -# CONFIG_NFSD_BLOCKLAYOUT is not set -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_GRACE_PERIOD=m -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y -CONFIG_SUNRPC_DEBUG=y -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS2 is not set -CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_ACL=y -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB_DIRECT is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_AFS_FSCACHE=y -# CONFIG_AFS_DEBUG_CURSOR is not set -CONFIG_9P_FS=m -CONFIG_9P_FSCACHE=y -CONFIG_9P_FS_POSIX_ACL=y -CONFIG_9P_FS_SECURITY=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set -# CONFIG_UNICODE is not set -# end of File systems - -# -# Security options -# -CONFIG_KEYS=y -CONFIG_KEYS_COMPAT=y -CONFIG_PERSISTENT_KEYRINGS=y -CONFIG_BIG_KEYS=y -CONFIG_TRUSTED_KEYS=y -CONFIG_ENCRYPTED_KEYS=y -CONFIG_KEY_DH_OPERATIONS=y -# CONFIG_SECURITY_DMESG_RESTRICT is not set -CONFIG_SECURITY=y -CONFIG_SECURITY_WRITABLE_HOOKS=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_PAGE_TABLE_ISOLATION=y -# CONFIG_SECURITY_INFINIBAND is not set -CONFIG_SECURITY_NETWORK_XFRM=y -CONFIG_SECURITY_PATH=y -CONFIG_INTEL_TXT=y -CONFIG_LSM_MMAP_MIN_ADDR=0 -CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y -CONFIG_HARDENED_USERCOPY=y -CONFIG_HARDENED_USERCOPY_FALLBACK=y -# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set -CONFIG_FORTIFY_SOURCE=y -# CONFIG_STATIC_USERMODEHELPER is not set -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_SECURITY_SELINUX_DEVELOP=y -CONFIG_SECURITY_SELINUX_AVC_STATS=y -CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 -CONFIG_SECURITY_SMACK=y -# CONFIG_SECURITY_SMACK_BRINGUP is not set -CONFIG_SECURITY_SMACK_NETFILTER=y -# CONFIG_SECURITY_SMACK_APPEND_SIGNALS is not set -CONFIG_SECURITY_TOMOYO=y -CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 -CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 -# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set -CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" -CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" -# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set -CONFIG_SECURITY_APPARMOR=y -CONFIG_SECURITY_APPARMOR_HASH=y -CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y -# CONFIG_SECURITY_APPARMOR_DEBUG is not set -# CONFIG_SECURITY_LOADPIN is not set -CONFIG_SECURITY_YAMA=y -# CONFIG_SECURITY_SAFESETID is not set -CONFIG_INTEGRITY=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_INTEGRITY_TRUSTED_KEYRING=y -CONFIG_INTEGRITY_AUDIT=y -CONFIG_IMA=y -CONFIG_IMA_MEASURE_PCR_IDX=10 -CONFIG_IMA_LSM_RULES=y -# CONFIG_IMA_TEMPLATE is not set -CONFIG_IMA_NG_TEMPLATE=y -# CONFIG_IMA_SIG_TEMPLATE is not set -CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" -CONFIG_IMA_DEFAULT_HASH_SHA1=y -# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set -# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set -CONFIG_IMA_DEFAULT_HASH="sha1" -# CONFIG_IMA_WRITE_POLICY is not set -# CONFIG_IMA_READ_POLICY is not set -CONFIG_IMA_APPRAISE=y -# CONFIG_IMA_ARCH_POLICY is not set -# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set -CONFIG_IMA_APPRAISE_BOOTPARAM=y -CONFIG_IMA_TRUSTED_KEYRING=y -CONFIG_IMA_BLACKLIST_KEYRING=y -# CONFIG_IMA_LOAD_X509 is not set -CONFIG_EVM=y -CONFIG_EVM_ATTR_FSUUID=y -CONFIG_EVM_EXTRA_SMACK_XATTRS=y -# CONFIG_EVM_ADD_XATTRS is not set -# CONFIG_EVM_LOAD_X509 is not set -# CONFIG_DEFAULT_SECURITY_SELINUX is not set -# CONFIG_DEFAULT_SECURITY_SMACK is not set -# CONFIG_DEFAULT_SECURITY_TOMOYO is not set -CONFIG_DEFAULT_SECURITY_APPARMOR=y -# CONFIG_DEFAULT_SECURITY_DAC is not set -CONFIG_LSM="yama,loadpin,safesetid,integrity,apparmor,selinux,smack,tomoyo" - -# -# Kernel hardening options -# -CONFIG_GCC_PLUGIN_STRUCTLEAK=y - -# -# Memory initialization -# -# CONFIG_INIT_STACK_NONE is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set -# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set -CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL=y -# CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE is not set -CONFIG_GCC_PLUGIN_STACKLEAK=y -CONFIG_STACKLEAK_TRACK_MIN_SIZE=100 -# CONFIG_STACKLEAK_METRICS is not set -CONFIG_STACKLEAK_RUNTIME_DISABLE=y -# end of Memory initialization -# end of Kernel hardening options -# end of Security options - -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_SIMD=m -CONFIG_CRYPTO_GLUE_HELPER_X86=m -CONFIG_CRYPTO_ENGINE=m - -# -# Public-key cryptography -# -CONFIG_CRYPTO_RSA=y -CONFIG_CRYPTO_DH=y -CONFIG_CRYPTO_ECC=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_ECRDSA=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m -CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m -CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2=m -CONFIG_CRYPTO_AEGIS256_AESNI_SSE2=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS640_GLUE=m -CONFIG_CRYPTO_MORUS640_SSE2=m -CONFIG_CRYPTO_MORUS1280=m -CONFIG_CRYPTO_MORUS1280_GLUE=m -CONFIG_CRYPTO_MORUS1280_SSE2=m -CONFIG_CRYPTO_MORUS1280_AVX2=m -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CFB=m -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_OFB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_KEYWRAP=m -CONFIG_CRYPTO_NHPOLY1305=m -CONFIG_CRYPTO_NHPOLY1305_SSE2=m -CONFIG_CRYPTO_NHPOLY1305_AVX2=m -CONFIG_CRYPTO_ADIANTUM=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32C_INTEL=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRC32_PCLMUL=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_POLY1305_X86_64=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_SSSE3=m -CONFIG_CRYPTO_SHA256_SSSE3=m -CONFIG_CRYPTO_SHA512_SSSE3=m -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_SM3=m -CONFIG_CRYPTO_STREEBOG=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_AES_X86_64=m -CONFIG_CRYPTO_AES_NI_INTEL=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_BLOWFISH_X86_64=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAMELLIA_X86_64=m -CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m -CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST5_AVX_X86_64=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_CAST6_AVX_X86_64=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_DES3_EDE_X86_64=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_CHACHA20_X86_64=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m -CONFIG_CRYPTO_SERPENT_AVX_X86_64=m -CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m -CONFIG_CRYPTO_SM4=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_TWOFISH_X86_64=m -CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m -CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ZSTD=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_HASH=y -CONFIG_CRYPTO_DRBG_CTR=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -# CONFIG_CRYPTO_STATS is not set -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_PADLOCK=y -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_CCP=y -CONFIG_CRYPTO_DEV_CCP_DD=m -CONFIG_CRYPTO_DEV_SP_CCP=y -CONFIG_CRYPTO_DEV_CCP_CRYPTO=m -CONFIG_CRYPTO_DEV_SP_PSP=y -CONFIG_CRYPTO_DEV_QAT=m -CONFIG_CRYPTO_DEV_QAT_DH895xCC=m -CONFIG_CRYPTO_DEV_QAT_C3XXX=m -CONFIG_CRYPTO_DEV_QAT_C62X=m -CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m -CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m -CONFIG_CRYPTO_DEV_QAT_C62XVF=m -CONFIG_CRYPTO_DEV_NITROX=m -CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m -CONFIG_CRYPTO_DEV_CHELSIO=m -# CONFIG_CHELSIO_IPSEC_INLINE is not set -# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set -CONFIG_CRYPTO_DEV_VIRTIO=m -CONFIG_ASYMMETRIC_KEY_TYPE=y -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y -CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m -CONFIG_X509_CERTIFICATE_PARSER=y -CONFIG_PKCS8_PRIVATE_KEY_PARSER=m -CONFIG_TPM_KEY_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=y -# CONFIG_PKCS7_TEST_KEY is not set -# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set -# CONFIG_SECONDARY_TRUSTED_KEYRING is not set -# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -# end of Certificates for signature checking - -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=m -CONFIG_RAID6_PQ_BENCHMARK=y -CONFIG_PACKING=y -CONFIG_BITREVERSE=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_CORDIC=m -CONFIG_RATIONAL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC64=m -# CONFIG_CRC4 is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -CONFIG_CRC8=m -CONFIG_XXHASH=y -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=m -CONFIG_XZ_DEC=y -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_TEST=m -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_BCH=m -CONFIG_BCH_CONST_PARAMS=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_XARRAY_MULTI=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y -CONFIG_DMA_VIRT_OPS=y -CONFIG_SWIOTLB=y -# CONFIG_DMA_CMA is not set -# CONFIG_DMA_API_DEBUG is not set -CONFIG_SGL_ALLOC=y -CONFIG_IOMMU_HELPER=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_DDR=y -CONFIG_IRQ_POLL=y -CONFIG_MPILIB=y -CONFIG_SIGNATURE=y -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_FONT_SUPPORT=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_SG_POOL=y -CONFIG_ARCH_HAS_PMEM_API=y -CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y -CONFIG_ARCH_HAS_UACCESS_MCSAFE=y -CONFIG_ARCH_STACKWALK=y -CONFIG_SBITMAP=y -CONFIG_PARMAN=m -# CONFIG_STRING_SELFTEST is not set -# end of Library routines - -CONFIG_OBJAGG=m - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -# CONFIG_PRINTK_CALLER is not set -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_CONSOLE_LOGLEVEL_QUIET=4 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_BOOT_PRINTK_DELAY=y -CONFIG_DYNAMIC_DEBUG=y -# end of printk and dmesg options - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_READABLE_ASM is not set -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_OPTIMIZE_INLINING=y -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_FRAME_POINTER=y -CONFIG_STACK_VALIDATION=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -# end of Compile-time checks and compiler options - -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MISC=y - -# -# Memory Debugging -# -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_PAGE_OWNER is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_DEBUG_PAGE_REF is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -# CONFIG_DEBUG_VIRTUAL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m -# CONFIG_DEBUG_PER_CPU_MAPS is not set -CONFIG_HAVE_ARCH_KASAN=y -CONFIG_CC_HAS_KASAN_GENERIC=y -# CONFIG_KASAN is not set -CONFIG_KASAN_STACK=1 -# end of Memory Debugging - -CONFIG_ARCH_HAS_KCOV=y -CONFIG_CC_HAS_SANCOV_TRACE_PC=y -# CONFIG_KCOV is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -CONFIG_LOCKUP_DETECTOR=y -CONFIG_SOFTLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_HARDLOCKUP_DETECTOR_PERF=y -CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y -CONFIG_HARDLOCKUP_DETECTOR=y -# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 -# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -# CONFIG_WQ_WATCHDOG is not set -# end of Debug Lockups and Hangs - -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -CONFIG_SCHEDSTATS=y -CONFIG_SCHED_STACK_END_CHECK=y -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -CONFIG_LOCK_DEBUGGING_SUPPORT=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_RWSEMS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_LOCK_TORTURE_TEST=m -CONFIG_WW_MUTEX_SELFTEST=m -# end of Lock Debugging (spinlocks, mutexes, etc...) - -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PLIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -CONFIG_TORTURE_TEST=m -# CONFIG_RCU_PERF_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# end of RCU Debugging - -# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -CONFIG_NOTIFIER_ERROR_INJECTION=m -CONFIG_PM_NOTIFIER_ERROR_INJECT=m -CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m -CONFIG_FUNCTION_ERROR_INJECTION=y -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_FENTRY=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACER_MAX_TRACE=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -CONFIG_SCHED_TRACER=y -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -CONFIG_TRACER_SNAPSHOT=y -# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -CONFIG_STACK_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_KPROBE_EVENTS=y -# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set -# CONFIG_UPROBE_EVENTS is not set -CONFIG_BPF_EVENTS=y -CONFIG_DYNAMIC_EVENTS=y -CONFIG_PROBE_EVENTS=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_FUNCTION_PROFILER=y -# CONFIG_BPF_KPROBE_OVERRIDE is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -CONFIG_MMIOTRACE=y -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_MMIOTRACE_TEST is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_PREEMPTIRQ_DELAY_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -CONFIG_RUNTIME_TESTING_MENU=y -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_SORT is not set -# CONFIG_KPROBES_SANITY_TEST is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -CONFIG_RBTREE_TEST=m -CONFIG_INTERVAL_TREE_TEST=m -CONFIG_PERCPU_TEST=m -# CONFIG_ATOMIC64_SELFTEST is not set -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_TEST_HEXDUMP=m -CONFIG_TEST_STRING_HELPERS=m -CONFIG_TEST_STRSCPY=m -CONFIG_TEST_KSTRTOX=m -CONFIG_TEST_PRINTF=m -CONFIG_TEST_BITMAP=m -CONFIG_TEST_BITFIELD=m -CONFIG_TEST_UUID=m -CONFIG_TEST_XARRAY=m -CONFIG_TEST_OVERFLOW=m -CONFIG_TEST_RHASHTABLE=m -CONFIG_TEST_HASH=m -CONFIG_TEST_IDA=m -CONFIG_TEST_PARMAN=m -CONFIG_TEST_LKM=m -CONFIG_TEST_VMALLOC=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_FIND_BIT_BENCHMARK=m -CONFIG_TEST_FIRMWARE=m -# CONFIG_TEST_SYSCTL is not set -CONFIG_TEST_UDELAY=m -CONFIG_TEST_STATIC_KEYS=m -# CONFIG_TEST_KMOD is not set -# CONFIG_TEST_MEMCAT_P is not set -# CONFIG_TEST_LIVEPATCH is not set -CONFIG_TEST_OBJAGG=m -# CONFIG_TEST_STACKINIT is not set -CONFIG_MEMTEST=y -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_KGDB=y -CONFIG_KGDB_SERIAL_CONSOLE=y -# CONFIG_KGDB_TESTS is not set -CONFIG_KGDB_LOW_LEVEL_TRAP=y -CONFIG_KGDB_KDB=y -CONFIG_KDB_DEFAULT_ENABLE=0x1 -CONFIG_KDB_KEYBOARD=y -CONFIG_KDB_CONTINUE_CATASTROPHIC=0 -CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y -# CONFIG_UBSAN is not set -CONFIG_UBSAN_ALIGNMENT=y -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -CONFIG_STRICT_DEVMEM=y -CONFIG_IO_STRICT_DEVMEM=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_EARLY_PRINTK_USB=y -# CONFIG_X86_VERBOSE_BOOTUP is not set -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_DBGP=y -# CONFIG_EARLY_PRINTK_USB_XDBC is not set -# CONFIG_X86_PTDUMP is not set -# CONFIG_EFI_PGT_DUMP is not set -# CONFIG_DEBUG_WX is not set -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -# CONFIG_IOMMU_DEBUG is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -CONFIG_IO_DELAY_TYPE_0X80=0 -CONFIG_IO_DELAY_TYPE_0XED=1 -CONFIG_IO_DELAY_TYPE_UDELAY=2 -CONFIG_IO_DELAY_TYPE_NONE=3 -# CONFIG_IO_DELAY_0X80 is not set -CONFIG_IO_DELAY_0XED=y -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_DEFAULT_IO_DELAY_TYPE=1 -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_CPA_DEBUG is not set -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -CONFIG_X86_DEBUG_FPU=y -CONFIG_PUNIT_ATOM_DEBUG=m -# CONFIG_UNWINDER_ORC is not set -CONFIG_UNWINDER_FRAME_POINTER=y -# CONFIG_UNWINDER_GUESS is not set -# end of Kernel hacking diff --git a/gnu/packages/aux-files/linux-libre/5.3-arm-veyron.conf b/gnu/packages/aux-files/linux-libre/5.4-arm-veyron.conf index 72cb647b52..3f0cb3fb35 100644 --- a/gnu/packages/aux-files/linux-libre/5.3-arm-veyron.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-arm-veyron.conf @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 5.3.1-gnu Kernel Configuration +# Linux/arm 5.4.5 Kernel Configuration # # @@ -262,19 +262,13 @@ CONFIG_ARCH_MULTIPLATFORM=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP1 is not set # @@ -293,6 +287,7 @@ CONFIG_ARCH_MULTI_V6_V7=y # CONFIG_ARCH_ACTIONS is not set # CONFIG_ARCH_ALPINE is not set # CONFIG_ARCH_ARTPEC is not set +# CONFIG_ARCH_ASPEED is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_AXXIA is not set # CONFIG_ARCH_BCM is not set @@ -529,6 +524,7 @@ CONFIG_DT_IDLE_STATES=y # ARM CPU Idle Drivers # CONFIG_ARM_CPUIDLE=y +# CONFIG_ARM_PSCI_CPUIDLE is not set # CONFIG_ARM_HIGHBANK_CPUIDLE is not set # end of ARM CPU Idle Drivers # end of CPU Idle @@ -649,6 +645,7 @@ CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=8 +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y @@ -695,6 +692,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y @@ -707,6 +706,7 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_BLK_CMDLINE_PARSER is not set # CONFIG_BLK_WBT is not set # CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_CGROUP_IOCOST is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_BLK_SED_OPAL is not set @@ -807,6 +807,7 @@ CONFIG_GENERIC_EARLY_IOREMAP=y # CONFIG_IDLE_PAGE_TRACKING is not set # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set +# CONFIG_READ_ONLY_THP_FOR_FS is not set CONFIG_ARCH_HAS_PTE_SPECIAL=y # end of Memory Management options @@ -1267,6 +1268,7 @@ CONFIG_GENERIC_ARCH_TOPOLOGY=y # Bus devices # # CONFIG_BRCMSTB_GISB_ARB is not set +# CONFIG_MOXTET is not set # CONFIG_SIMPLE_PM_BUS is not set # CONFIG_VEXPRESS_CONFIG is not set # end of Bus devices @@ -1328,7 +1330,6 @@ CONFIG_VIRTIO_BLK=m # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -1535,6 +1536,7 @@ CONFIG_DM_CACHE=m CONFIG_DM_CACHE_SMQ=m # CONFIG_DM_WRITECACHE is not set CONFIG_DM_ERA=m +CONFIG_DM_CLONE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -1547,6 +1549,7 @@ CONFIG_DM_DUST=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m +CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m CONFIG_DM_LOG_WRITES=m @@ -1611,6 +1614,7 @@ CONFIG_SWPHY=y # # MII PHY device drivers # +# CONFIG_ADIN_PHY is not set # CONFIG_AMD_PHY is not set # CONFIG_AQUANTIA_PHY is not set # CONFIG_AX88796B_PHY is not set @@ -1858,11 +1862,11 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_ASPEED_VUART is not set +CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_FSL=y CONFIG_SERIAL_8250_DW=y # CONFIG_SERIAL_8250_EM is not set # CONFIG_SERIAL_8250_RT288X is not set -# CONFIG_SERIAL_8250_MOXA is not set CONFIG_SERIAL_OF_PLATFORM=y # @@ -1892,6 +1896,7 @@ CONFIG_SERIAL_ARC_CONSOLE=y CONFIG_SERIAL_ARC_NR_PORTS=1 # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_FSL_LINFLEXUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # CONFIG_SERIAL_ST_ASC is not set # end of Serial drivers @@ -1921,6 +1926,8 @@ CONFIG_DEVPORT=y # CONFIG_XILLYBUS is not set # end of Character devices +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set + # # I2C support # @@ -2309,8 +2316,7 @@ CONFIG_MFD_AS3722=y # CONFIG_MFD_BD9571MWV is not set CONFIG_MFD_AXP20X=y CONFIG_MFD_AXP20X_I2C=y -CONFIG_MFD_CROS_EC=y -CONFIG_MFD_CROS_EC_CHARDEV=y +CONFIG_MFD_CROS_EC_DEV=y # CONFIG_MFD_MADERA is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_PMIC_DA903X is not set @@ -2456,6 +2462,7 @@ CONFIG_REGULATOR_RK808=y # CONFIG_REGULATOR_S5M8767 is not set CONFIG_REGULATOR_SLG51000=m # CONFIG_REGULATOR_SY8106A is not set +# CONFIG_REGULATOR_SY8824X is not set # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set @@ -2557,12 +2564,16 @@ CONFIG_DRM_PANEL_SIMPLE=y # CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set # CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LB035Q02 is not set # CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set # CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set # CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m # CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set # CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set # CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set # CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set # CONFIG_DRM_PANEL_RONBO_RB070D30 is not set @@ -2573,9 +2584,13 @@ CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set # CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set # CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set # CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set # CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set # CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set +# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set # CONFIG_DRM_PANEL_TPO_TPG110 is not set # CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set # end of Display Panels @@ -2613,9 +2628,15 @@ CONFIG_DRM_DW_MIPI_DSI=y # CONFIG_DRM_STI is not set # CONFIG_DRM_ETNAVIV is not set # CONFIG_DRM_ARCPGU is not set -# CONFIG_DRM_HISI_HIBMC is not set # CONFIG_DRM_MXSFB is not set -# CONFIG_DRM_TINYDRM is not set +CONFIG_DRM_GM12U320=m +# CONFIG_TINYDRM_HX8357D is not set +# CONFIG_TINYDRM_ILI9225 is not set +# CONFIG_TINYDRM_ILI9341 is not set +# CONFIG_TINYDRM_MI0283QT is not set +# CONFIG_TINYDRM_REPAPER is not set +# CONFIG_TINYDRM_ST7586 is not set +# CONFIG_TINYDRM_ST7735R is not set # CONFIG_DRM_PL111 is not set # CONFIG_DRM_TVE200 is not set # CONFIG_DRM_LIMA is not set @@ -2973,6 +2994,7 @@ CONFIG_SND_SOC_RT5645=y CONFIG_SND_SOC_TS3A227E=y # CONFIG_SND_SOC_TSCS42XX is not set # CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_UDA1334 is not set # CONFIG_SND_SOC_WM8510 is not set # CONFIG_SND_SOC_WM8523 is not set # CONFIG_SND_SOC_WM8524 is not set @@ -3040,6 +3062,7 @@ CONFIG_HID_CORSAIR=y # CONFIG_HID_PRODIKEYS is not set # CONFIG_HID_CMEDIA is not set # CONFIG_HID_CP2112 is not set +# CONFIG_HID_CREATIVE_SB0540 is not set # CONFIG_HID_CYPRESS is not set # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set @@ -3128,6 +3151,9 @@ CONFIG_I2C_HID=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y +# CONFIG_USB_LED_TRIG is not set +# CONFIG_USB_ULPI_BUS is not set +# CONFIG_USB_CONN_GPIO is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y @@ -3145,7 +3171,6 @@ CONFIG_USB_OTG=y # CONFIG_USB_LEDS_TRIGGER_USBPORT is not set CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=y -# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -3210,6 +3235,7 @@ CONFIG_USB_UAS=y # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USBIP_CORE is not set +# CONFIG_USB_CDNS3 is not set # CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_DWC3 is not set CONFIG_USB_DWC2=y @@ -3236,7 +3262,6 @@ CONFIG_USB_DWC2_HOST=y # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_CYPRESS_CY7C63 is not set @@ -3273,9 +3298,6 @@ CONFIG_USB_GPIO_VBUS=y # CONFIG_USB_GADGET is not set # CONFIG_TYPEC is not set # CONFIG_USB_ROLE_SWITCH is not set -# CONFIG_USB_LED_TRIG is not set -# CONFIG_USB_ULPI_BUS is not set -# CONFIG_UWB is not set CONFIG_MMC=y CONFIG_PWRSEQ_EMMC=y CONFIG_PWRSEQ_SIMPLE=y @@ -3293,6 +3315,7 @@ CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PCI is not set CONFIG_MMC_SDHCI_PLTFM=y # CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_ASPEED is not set # CONFIG_MMC_SDHCI_OF_AT91 is not set # CONFIG_MMC_SDHCI_OF_DWCMSHC is not set CONFIG_MMC_SDHCI_CADENCE=y @@ -3551,6 +3574,7 @@ CONFIG_PL330_DMA=y CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set # end of DMABUF options # CONFIG_AUXDISPLAY is not set @@ -3565,12 +3589,16 @@ CONFIG_VIRTIO=y # # end of Microsoft Hyper-V guest support +# CONFIG_GREYBUS is not set # CONFIG_STAGING is not set # CONFIG_GOLDFISH is not set +CONFIG_MFD_CROS_EC=y CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=y CONFIG_CROS_EC_SPI=y CONFIG_CROS_EC_PROTO=y +CONFIG_CROS_EC_CHARDEV=y CONFIG_CROS_EC_LIGHTBAR=y CONFIG_CROS_EC_VBC=m CONFIG_CROS_EC_DEBUGFS=m @@ -3771,7 +3799,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_DMARD06 is not set # CONFIG_DMARD09 is not set # CONFIG_DMARD10 is not set -# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set # CONFIG_IIO_ST_ACCEL_3AXIS is not set # CONFIG_KXSD9 is not set # CONFIG_KXCJK1013 is not set @@ -3992,6 +4019,7 @@ CONFIG_ADF4371=m # Inertial measurement units # # CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set # CONFIG_ADIS16480 is not set # CONFIG_BMI160_I2C is not set # CONFIG_BMI160_SPI is not set @@ -4025,6 +4053,7 @@ CONFIG_ADF4371=m # CONFIG_LV0104CS is not set # CONFIG_MAX44000 is not set # CONFIG_MAX44009 is not set +# CONFIG_NOA1305 is not set # CONFIG_OPT3001 is not set # CONFIG_PA12203001 is not set # CONFIG_SI1133 is not set @@ -4085,6 +4114,7 @@ CONFIG_IIO_SYSFS_TRIGGER=y # # CONFIG_AD5272 is not set # CONFIG_DS1803 is not set +# CONFIG_MAX5432 is not set # CONFIG_MAX5481 is not set # CONFIG_MAX5487 is not set # CONFIG_MCP4018 is not set @@ -4292,6 +4322,9 @@ CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set +CONFIG_FS_VERITY=y +# CONFIG_FS_VERITY_DEBUG is not set +# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y @@ -4301,6 +4334,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=m # CONFIG_CUSE is not set +# CONFIG_VIRTIO_FS is not set CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y @@ -4398,6 +4432,7 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_EROFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" @@ -4532,7 +4567,7 @@ CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y # CONFIG_CRYPTO_PCRYPT is not set # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_ENGINE=m @@ -4552,10 +4587,6 @@ CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y # CONFIG_CRYPTO_CHACHA20POLY1305 is not set # CONFIG_CRYPTO_AEGIS128 is not set -# CONFIG_CRYPTO_AEGIS128L is not set -# CONFIG_CRYPTO_AEGIS256 is not set -# CONFIG_CRYPTO_MORUS640 is not set -# CONFIG_CRYPTO_MORUS1280 is not set CONFIG_CRYPTO_SEQIV=y # CONFIG_CRYPTO_ECHAINIV is not set @@ -4573,6 +4604,7 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_XTS=y # CONFIG_CRYPTO_KEYWRAP is not set # CONFIG_CRYPTO_ADIANTUM is not set +CONFIG_CRYPTO_ESSIV=m # # Hash modes @@ -4599,6 +4631,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_SHA3 is not set @@ -4610,6 +4643,7 @@ CONFIG_CRYPTO_STREEBOG=m # # Ciphers # +CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set # CONFIG_CRYPTO_ANUBIS is not set @@ -4619,6 +4653,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_LIB_DES=y CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set @@ -4661,6 +4696,7 @@ CONFIG_CRYPTO_DEV_ATMEL_ECC=m CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m CONFIG_CRYPTO_DEV_ROCKCHIP=y CONFIG_CRYPTO_DEV_VIRTIO=m +# CONFIG_CRYPTO_DEV_SAFEXCEL is not set # CONFIG_CRYPTO_DEV_CCREE is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y @@ -4752,7 +4788,6 @@ CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y -CONFIG_ARCH_HAS_DMA_MMAP_PGPROT=y CONFIG_SWIOTLB=y CONFIG_DMA_REMAP=y CONFIG_DMA_CMA=y @@ -4776,7 +4811,6 @@ CONFIG_NLATTR=y CONFIG_CLZ_TAB=y CONFIG_IRQ_POLL=y CONFIG_MPILIB=y -CONFIG_DIMLIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_FONT_SUPPORT=y @@ -4817,7 +4851,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_INSTALL is not set CONFIG_OPTIMIZE_INLINING=y diff --git a/gnu/packages/aux-files/linux-libre/5.3-arm.conf b/gnu/packages/aux-files/linux-libre/5.4-arm.conf index 66f0d3fd05..23d3c8c26c 100644 --- a/gnu/packages/aux-files/linux-libre/5.3-arm.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-arm.conf @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 5.3.1-gnu Kernel Configuration +# Linux/arm 5.4.5 Kernel Configuration # # @@ -266,19 +266,13 @@ CONFIG_ARCH_MULTIPLATFORM=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP1 is not set # @@ -297,6 +291,7 @@ CONFIG_ARCH_VIRT=y # CONFIG_ARCH_ACTIONS is not set # CONFIG_ARCH_ALPINE is not set # CONFIG_ARCH_ARTPEC is not set +# CONFIG_ARCH_ASPEED is not set # CONFIG_ARCH_AT91 is not set CONFIG_ARCH_BCM=y @@ -676,6 +671,7 @@ CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y # CONFIG_CPUFREQ_DT=m CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m CONFIG_ARM_ARMADA_37XX_CPUFREQ=m CONFIG_ARM_ARMADA_8K_CPUFREQ=m # CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set @@ -754,6 +750,7 @@ CONFIG_DMIID=y CONFIG_DMI_SYSFS=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_TRUSTED_FOUNDATIONS=y +# CONFIG_TURRIS_MOX_RWTM is not set CONFIG_HAVE_ARM_SMCCC=y CONFIG_ARM_PSCI_FW=y # CONFIG_GOOGLE_FIRMWARE is not set @@ -773,6 +770,7 @@ CONFIG_EFI_ARMSTUB_DTB_LOADER=y CONFIG_RESET_ATTACK_MITIGATION=y # end of EFI (Extensible Firmware Interface) Support +# CONFIG_IMX_DSP is not set # CONFIG_IMX_SCU is not set # @@ -836,6 +834,7 @@ CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=8 +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_OLD_SIGACTION=y @@ -882,9 +881,12 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y +CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y @@ -895,6 +897,7 @@ CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_CMDLINE_PARSER is not set CONFIG_BLK_WBT=y # CONFIG_BLK_CGROUP_IOLATENCY is not set +CONFIG_BLK_CGROUP_IOCOST=y CONFIG_BLK_WBT_MQ=y CONFIG_BLK_DEBUG_FS=y # CONFIG_BLK_SED_OPAL is not set @@ -1533,9 +1536,7 @@ CONFIG_NET_DSA_TAG_GSWIP=m CONFIG_NET_DSA_TAG_DSA=m CONFIG_NET_DSA_TAG_EDSA=m CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m CONFIG_NET_DSA_TAG_QCA=m CONFIG_NET_DSA_TAG_LAN9303=m CONFIG_NET_DSA_TAG_SJA1105=m @@ -1663,6 +1664,7 @@ CONFIG_NET_ACT_CT=m CONFIG_NET_IFE_SKBMARK=m CONFIG_NET_IFE_SKBPRIO=m CONFIG_NET_IFE_SKBTCINDEX=m +# CONFIG_NET_TC_SKB_EXT is not set CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=m @@ -1708,7 +1710,7 @@ CONFIG_NET_FLOW_LIMIT=y # Network testing # CONFIG_NET_PKTGEN=m -CONFIG_NET_DROP_MONITOR=m +CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options @@ -1717,6 +1719,7 @@ CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m CONFIG_CAN_GW=m +CONFIG_CAN_J1939=m # # CAN Device Drivers @@ -1728,6 +1731,7 @@ CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y # CONFIG_CAN_FLEXCAN is not set # CONFIG_CAN_GRCAN is not set +CONFIG_CAN_KVASER_PCIEFD=m CONFIG_CAN_SUN4I=m # CONFIG_CAN_TI_HECC is not set # CONFIG_CAN_C_CAN is not set @@ -1738,13 +1742,14 @@ CONFIG_CAN_SUN4I=m # CONFIG_CAN_RCAR is not set # CONFIG_CAN_RCAR_CANFD is not set CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -# CONFIG_CAN_SJA1000_PLATFORM is not set CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_F81601=m +CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SJA1000_ISA=m +# CONFIG_CAN_SJA1000_PLATFORM is not set CONFIG_CAN_SOFTING=m # @@ -2031,6 +2036,7 @@ CONFIG_ARM_CCI=y CONFIG_ARM_CCI400_COMMON=y CONFIG_ARM_CCI400_PORT_CTRL=y # CONFIG_BRCMSTB_GISB_ARB is not set +# CONFIG_MOXTET is not set # CONFIG_IMX_WEIM is not set CONFIG_MVEBU_MBUS=y CONFIG_OMAP_INTERCONNECT=y @@ -2048,13 +2054,13 @@ CONFIG_PROC_EVENTS=y CONFIG_GNSS=m CONFIG_MTD=y # CONFIG_MTD_TESTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_OF_PARTS=m -CONFIG_MTD_AR7_PARTS=m # # Partition parsers # +CONFIG_MTD_AR7_PARTS=m +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=m # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # end of Partition parsers @@ -2116,7 +2122,6 @@ CONFIG_MTD_PLATRAM=m CONFIG_MTD_DATAFLASH=m # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set # CONFIG_MTD_DATAFLASH_OTP is not set -CONFIG_MTD_M25P80=m # CONFIG_MTD_MCHP23K256 is not set CONFIG_MTD_SST25L=m # CONFIG_MTD_SLRAM is not set @@ -2157,6 +2162,7 @@ CONFIG_MTD_NAND_MARVELL=m CONFIG_MTD_NAND_GPMI_NAND=m CONFIG_MTD_NAND_MXC=m CONFIG_MTD_NAND_SUNXI=m +CONFIG_MTD_NAND_MXIC=m CONFIG_MTD_NAND_TEGRA=m # CONFIG_MTD_NAND_GPIO is not set # CONFIG_MTD_NAND_PLATFORM is not set @@ -2262,7 +2268,6 @@ CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m # CONFIG_DUMMY_IRQ is not set # CONFIG_PHANTOM is not set -CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m @@ -2607,6 +2612,7 @@ CONFIG_DM_CACHE=m CONFIG_DM_CACHE_SMQ=m # CONFIG_DM_WRITECACHE is not set CONFIG_DM_ERA=m +CONFIG_DM_CLONE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -2619,6 +2625,7 @@ CONFIG_DM_DUST=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m +CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m CONFIG_DM_LOG_WRITES=m @@ -2723,11 +2730,13 @@ CONFIG_NET_DSA_BCM_SF2=m # CONFIG_NET_DSA_MT7530 is not set CONFIG_NET_DSA_MV88E6060=m # CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set +# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set CONFIG_NET_DSA_MV88E6XXX=m CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y # CONFIG_NET_DSA_MV88E6XXX_PTP is not set CONFIG_NET_DSA_SJA1105=m CONFIG_NET_DSA_SJA1105_PTP=y +# CONFIG_NET_DSA_SJA1105_TAS is not set # CONFIG_NET_DSA_QCA8K is not set CONFIG_NET_DSA_REALTEK_SMI=m # CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set @@ -2896,6 +2905,7 @@ CONFIG_MLX5_MPFS=y CONFIG_MLX5_ESWITCH=y CONFIG_MLX5_CORE_EN_DCB=y # CONFIG_MLX5_CORE_IPOIB is not set +CONFIG_MLX5_SW_STEERING=y # CONFIG_MLXSW_CORE is not set # CONFIG_MLXFW is not set CONFIG_NET_VENDOR_MICREL=y @@ -2937,12 +2947,12 @@ CONFIG_NET_VENDOR_OKI=y CONFIG_NET_VENDOR_PACKET_ENGINES=y CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m +CONFIG_NET_VENDOR_PENSANDO=y CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_QED=m CONFIG_QEDE=m @@ -3046,6 +3056,7 @@ CONFIG_SWPHY=y # MII PHY device drivers # CONFIG_SFP=m +CONFIG_ADIN_PHY=m CONFIG_AMD_PHY=m CONFIG_AQUANTIA_PHY=m CONFIG_AX88796B_PHY=m @@ -3174,6 +3185,7 @@ CONFIG_ATH9K_PCI=y CONFIG_ATH9K_RFKILL=y # CONFIG_ATH9K_CHANNEL_CONTEXT is not set CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_PCI_NO_EEPROM=m CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS is not set # CONFIG_ATH9K_HWRNG is not set @@ -3271,7 +3283,6 @@ CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y # CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set # # Debugging Options @@ -3653,7 +3664,6 @@ CONFIG_INPUT_RK805_PWRKEY=m # CONFIG_INPUT_IMS_PCU is not set # CONFIG_INPUT_CMA3000 is not set CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set # CONFIG_INPUT_DRV260X_HAPTICS is not set # CONFIG_INPUT_DRV2665_HAPTICS is not set # CONFIG_INPUT_DRV2667_HAPTICS is not set @@ -3728,12 +3738,12 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_ASPEED_VUART is not set +CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_FSL=y CONFIG_SERIAL_8250_DW=y # CONFIG_SERIAL_8250_EM is not set # CONFIG_SERIAL_8250_RT288X is not set # CONFIG_SERIAL_8250_OMAP is not set -CONFIG_SERIAL_8250_MOXA=m CONFIG_SERIAL_OF_PLATFORM=y # @@ -3775,6 +3785,7 @@ CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 # CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_FSL_LINFLEXUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # CONFIG_SERIAL_ST_ASC is not set # CONFIG_SERIAL_MVEBU_UART is not set @@ -3817,6 +3828,8 @@ CONFIG_DEVPORT=y # CONFIG_XILLYBUS is not set # end of Character devices +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set + # # I2C support # @@ -4180,6 +4193,7 @@ CONFIG_W1_MASTER_DS2482=m # CONFIG_W1_MASTER_DS1WM is not set CONFIG_W1_MASTER_GPIO=m CONFIG_HDQ_MASTER_OMAP=m +# CONFIG_W1_MASTER_SGI is not set # end of 1-wire Bus Masters # @@ -4197,6 +4211,7 @@ CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set # CONFIG_W1_SLAVE_DS2438 is not set +# CONFIG_W1_SLAVE_DS250X is not set # CONFIG_W1_SLAVE_DS2780 is not set # CONFIG_W1_SLAVE_DS2781 is not set # CONFIG_W1_SLAVE_DS28E04 is not set @@ -4292,6 +4307,7 @@ CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m +# CONFIG_SENSORS_AS370 is not set CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_ARM_SCMI=m # CONFIG_SENSORS_ASPEED is not set @@ -4386,7 +4402,6 @@ CONFIG_SENSORS_SCH5627=m # CONFIG_SENSORS_STTS751 is not set CONFIG_SENSORS_SMM665=m # CONFIG_SENSORS_ADC128D818 is not set -CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m @@ -4505,6 +4520,7 @@ CONFIG_TWL4030_WATCHDOG=m # CONFIG_TS4800_WATCHDOG is not set # CONFIG_MAX63XX_WATCHDOG is not set CONFIG_IMX2_WDT=m +CONFIG_IMX7ULP_WDT=m CONFIG_TEGRA_WATCHDOG=m # CONFIG_ALIM7101_WDT is not set # CONFIG_I6300ESB_WDT is not set @@ -4565,8 +4581,7 @@ CONFIG_MFD_BD9571MWV=m CONFIG_MFD_AXP20X=y CONFIG_MFD_AXP20X_I2C=y # CONFIG_MFD_AXP20X_RSB is not set -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_CHARDEV=m +CONFIG_MFD_CROS_EC_DEV=m CONFIG_MFD_MADERA=m CONFIG_MFD_MADERA_I2C=m CONFIG_MFD_MADERA_SPI=m @@ -4742,6 +4757,7 @@ CONFIG_REGULATOR_S5M8767=m CONFIG_REGULATOR_SLG51000=m CONFIG_REGULATOR_TI_ABB=m CONFIG_REGULATOR_SY8106A=m +CONFIG_REGULATOR_SY8824X=m # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set @@ -4807,6 +4823,7 @@ CONFIG_MEDIA_CONTROLLER_DVB=y CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L2_I2C=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m @@ -5077,6 +5094,7 @@ CONFIG_VIDEO_OMAP3=m # CONFIG_VIDEO_OMAP3_DEBUG is not set # CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set # CONFIG_VIDEO_XILINX is not set +# CONFIG_VIDEO_SUN4I_CSI is not set CONFIG_VIDEO_SUN6I_CSI=m # CONFIG_VIDEO_TI_CAL is not set CONFIG_V4L_MEM2MEM_DRIVERS=y @@ -5269,6 +5287,7 @@ CONFIG_VIDEO_OV5645=m CONFIG_VIDEO_OV5647=m CONFIG_VIDEO_OV6650=m CONFIG_VIDEO_OV5670=m +CONFIG_VIDEO_OV5675=m CONFIG_VIDEO_OV5695=m CONFIG_VIDEO_OV7251=m CONFIG_VIDEO_OV772X=m @@ -5691,12 +5710,6 @@ CONFIG_DRM_OMAP_ENCODER_TPD12S015=m CONFIG_DRM_OMAP_CONNECTOR_HDMI=m CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m # CONFIG_DRM_OMAP_PANEL_DSI_CM is not set -CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m -# CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02 is not set -# CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01 is not set -CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m -CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m -# CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11 is not set # end of OMAPDRM External Display Device Drivers CONFIG_DRM_TILCDC=m @@ -5732,12 +5745,16 @@ CONFIG_DRM_PANEL_ILITEK_ILI9881C=m # CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set # CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LB035Q02 is not set # CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set # CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set # CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m # CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set # CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set # CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set # CONFIG_DRM_PANEL_RONBO_RB070D30 is not set @@ -5748,9 +5765,13 @@ CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set # CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set # CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set # CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set # CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set # CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set +# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set # CONFIG_DRM_PANEL_TPO_TPG110 is not set # CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set # end of Display Panels @@ -5797,9 +5818,15 @@ CONFIG_DRM_VC4=m CONFIG_DRM_ETNAVIV=m CONFIG_DRM_ETNAVIV_THERMAL=y # CONFIG_DRM_ARCPGU is not set -# CONFIG_DRM_HISI_HIBMC is not set # CONFIG_DRM_MXSFB is not set -# CONFIG_DRM_TINYDRM is not set +CONFIG_DRM_GM12U320=m +# CONFIG_TINYDRM_HX8357D is not set +# CONFIG_TINYDRM_ILI9225 is not set +# CONFIG_TINYDRM_ILI9341 is not set +# CONFIG_TINYDRM_MI0283QT is not set +# CONFIG_TINYDRM_REPAPER is not set +# CONFIG_TINYDRM_ST7586 is not set +# CONFIG_TINYDRM_ST7735R is not set # CONFIG_DRM_PL111 is not set # CONFIG_DRM_TVE200 is not set # CONFIG_DRM_XEN is not set @@ -6067,6 +6094,7 @@ CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_HDA_CORE=m CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_ALIGNED_MMIO=y CONFIG_SND_HDA_PREALLOC_SIZE=2048 CONFIG_SND_ARM=y # CONFIG_SND_ARMAACI is not set @@ -6325,6 +6353,7 @@ CONFIG_SND_SOC_TS3A227E=m # CONFIG_SND_SOC_TSCS454 is not set CONFIG_SND_SOC_TWL4030=m CONFIG_SND_SOC_TWL6040=m +# CONFIG_SND_SOC_UDA1334 is not set # CONFIG_SND_SOC_WM8510 is not set # CONFIG_SND_SOC_WM8523 is not set # CONFIG_SND_SOC_WM8524 is not set @@ -6398,6 +6427,7 @@ CONFIG_HID_MACALLY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CMEDIA=m CONFIG_HID_CP2112=m +CONFIG_HID_CREATIVE_SB0540=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y @@ -6512,6 +6542,9 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y +CONFIG_USB_LED_TRIG=y +CONFIG_USB_ULPI_BUS=m +CONFIG_USB_CONN_GPIO=m CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=m CONFIG_USB_PCI=y @@ -6528,9 +6561,6 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_LEDS_TRIGGER_USBPORT=m CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers @@ -6569,8 +6599,6 @@ CONFIG_USB_UHCI_PLATFORM=y CONFIG_USB_U132_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m # CONFIG_USB_IMX21_HCD is not set # CONFIG_USB_HCD_BCMA is not set # CONFIG_USB_HCD_SSB is not set @@ -6615,6 +6643,9 @@ CONFIG_USB_UAS=m CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # CONFIG_USBIP_CORE is not set +CONFIG_USB_CDNS3=m +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set CONFIG_USB_MUSB_HDRC=m # CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_GADGET is not set @@ -6736,7 +6767,6 @@ CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m @@ -6876,12 +6906,6 @@ CONFIG_USB_G_NOKIA=m # CONFIG_USB_G_WEBCAM is not set # CONFIG_TYPEC is not set CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m CONFIG_MMC=y CONFIG_PWRSEQ_EMMC=y # CONFIG_PWRSEQ_SD8787 is not set @@ -6903,6 +6927,7 @@ CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_ASPEED is not set # CONFIG_MMC_SDHCI_OF_AT91 is not set # CONFIG_MMC_SDHCI_OF_ESDHC is not set # CONFIG_MMC_SDHCI_OF_DWCMSHC is not set @@ -7262,6 +7287,7 @@ CONFIG_DMA_ENGINE_RAID=y CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set # end of DMABUF options # CONFIG_AUXDISPLAY is not set @@ -7315,6 +7341,7 @@ CONFIG_XEN_EFI=y CONFIG_XEN_AUTO_XLATE=y # end of Xen driver support +# CONFIG_GREYBUS is not set CONFIG_STAGING=y # CONFIG_PRISM2_USB is not set # CONFIG_COMEDI is not set @@ -7424,7 +7451,6 @@ CONFIG_SPEAKUP_SYNTH_DUMMY=m # CONFIG_WILC1000_SPI is not set # CONFIG_MOST is not set # CONFIG_KS7010 is not set -# CONFIG_GREYBUS is not set CONFIG_BCM_VIDEOCORE=y # CONFIG_BCM2835_VCHIQ is not set # CONFIG_SND_BCM2835 is not set @@ -7437,22 +7463,34 @@ CONFIG_PI433=m # end of Gasket devices # CONFIG_XIL_AXIS_FIFO is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set # CONFIG_FIELDBUS_DEV is not set # CONFIG_KPC2000 is not set +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_EXFAT_FS=m +CONFIG_EXFAT_DONT_MOUNT_VFAT=y +CONFIG_EXFAT_DISCARD=y +# CONFIG_EXFAT_DELAYED_SYNC is not set +# CONFIG_EXFAT_KERNEL_DEBUG is not set +# CONFIG_EXFAT_DEBUG_MSG is not set +CONFIG_EXFAT_DEFAULT_CODEPAGE=437 +CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" +CONFIG_QLGE=m # CONFIG_GOLDFISH is not set +CONFIG_MFD_CROS_EC=m CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC=m CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_SPI=m CONFIG_CROS_EC_PROTO=y +CONFIG_CROS_EC_CHARDEV=m # CONFIG_CROS_EC_LIGHTBAR is not set CONFIG_CROS_EC_VBC=m CONFIG_CROS_EC_DEBUGFS=m @@ -7648,6 +7686,7 @@ CONFIG_IMX_GPCV2_PM_DOMAINS=y CONFIG_ROCKCHIP_GRF=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_SOC_SAMSUNG=y +CONFIG_EXYNOS_CHIPID=y CONFIG_EXYNOS_PMU=y CONFIG_EXYNOS_PMU_ARM_DRIVERS=y CONFIG_EXYNOS_PM_DOMAINS=y @@ -7744,7 +7783,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_DMARD09 is not set # CONFIG_DMARD10 is not set CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m @@ -7981,6 +8019,7 @@ CONFIG_HID_SENSOR_GYRO_3D=m # Inertial measurement units # # CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set # CONFIG_ADIS16480 is not set # CONFIG_BMI160_I2C is not set # CONFIG_BMI160_SPI is not set @@ -8016,6 +8055,7 @@ CONFIG_HID_SENSOR_PROX=m # CONFIG_LV0104CS is not set # CONFIG_MAX44000 is not set # CONFIG_MAX44009 is not set +# CONFIG_NOA1305 is not set # CONFIG_OPT3001 is not set # CONFIG_PA12203001 is not set # CONFIG_SI1133 is not set @@ -8079,6 +8119,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # CONFIG_AD5272 is not set # CONFIG_DS1803 is not set +# CONFIG_MAX5432 is not set # CONFIG_MAX5481 is not set # CONFIG_MAX5487 is not set # CONFIG_MCP4018 is not set @@ -8201,6 +8242,7 @@ CONFIG_IMX_IRQSTEER=y # CONFIG_IPACK_BUS is not set CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_SCMI=y CONFIG_RESET_SIMPLE=y CONFIG_RESET_SOCFPGA=y CONFIG_RESET_SUNXI=y @@ -8369,6 +8411,9 @@ CONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set +CONFIG_FS_VERITY=y +# CONFIG_FS_VERITY_DEBUG is not set +# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y @@ -8386,6 +8431,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=m CONFIG_CUSE=m +CONFIG_VIRTIO_FS=m CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set # CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set @@ -8519,6 +8565,12 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +CONFIG_EROFS_FS=m +# CONFIG_EROFS_FS_DEBUG is not set +CONFIG_EROFS_FS_XATTR=y +CONFIG_EROFS_FS_POSIX_ACL=y +CONFIG_EROFS_FS_SECURITY=y +# CONFIG_EROFS_FS_ZIP is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m @@ -8548,7 +8600,6 @@ CONFIG_NFSD_BLOCKLAYOUT=y # CONFIG_NFSD_SCSILAYOUT is not set # CONFIG_NFSD_FLEXFILELAYOUT is not set CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y @@ -8689,6 +8740,7 @@ CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y # CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y # CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -8710,6 +8762,7 @@ CONFIG_IMA_APPRAISE=y # CONFIG_IMA_ARCH_POLICY is not set # CONFIG_IMA_APPRAISE_BUILD_POLICY is not set CONFIG_IMA_APPRAISE_BOOTPARAM=y +# CONFIG_IMA_APPRAISE_MODSIG is not set CONFIG_IMA_TRUSTED_KEYRING=y # CONFIG_IMA_BLACKLIST_KEYRING is not set # CONFIG_IMA_LOAD_X509 is not set @@ -8796,10 +8849,6 @@ CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS1280=m CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_ECHAINIV=m @@ -8818,6 +8867,7 @@ CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_KEYWRAP is not set CONFIG_CRYPTO_NHPOLY1305=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_ESSIV=m # # Hash modes @@ -8844,6 +8894,7 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m # CONFIG_CRYPTO_SHA3 is not set @@ -8855,6 +8906,7 @@ CONFIG_CRYPTO_WP512=m # # Ciphers # +CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_ANUBIS=m @@ -8866,6 +8918,7 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_LIB_DES=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m @@ -8921,6 +8974,7 @@ CONFIG_CRYPTO_DEV_SUN4I_SS=m # CONFIG_CRYPTO_DEV_ROCKCHIP is not set CONFIG_CRYPTO_DEV_CHELSIO=m CONFIG_CRYPTO_DEV_VIRTIO=m +# CONFIG_CRYPTO_DEV_SAFEXCEL is not set # CONFIG_CRYPTO_DEV_CCREE is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y @@ -9007,6 +9061,7 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_INTERVAL_TREE=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y @@ -9019,7 +9074,6 @@ CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y -CONFIG_ARCH_HAS_DMA_MMAP_PGPROT=y CONFIG_DMA_VIRT_OPS=y CONFIG_SWIOTLB=y CONFIG_DMA_REMAP=y @@ -9090,7 +9144,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_INSTALL is not set CONFIG_OPTIMIZE_INLINING=y diff --git a/gnu/packages/aux-files/linux-libre/5.3-arm64.conf b/gnu/packages/aux-files/linux-libre/5.4-arm64.conf index 968400030a..f35eb8dc17 100644 --- a/gnu/packages/aux-files/linux-libre/5.3-arm64.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-arm64.conf @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm64 5.3.1-gnu Kernel Configuration +# Linux/arm64 5.4.5 Kernel Configuration # # @@ -329,6 +329,7 @@ CONFIG_CAVIUM_ERRATUM_23144=y CONFIG_CAVIUM_ERRATUM_23154=y CONFIG_CAVIUM_ERRATUM_27456=y CONFIG_CAVIUM_ERRATUM_30115=y +CONFIG_CAVIUM_TX2_ERRATUM_219=y CONFIG_QCOM_FALKOR_ERRATUM_1003=y CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y CONFIG_QCOM_FALKOR_ERRATUM_1009=y @@ -379,7 +380,7 @@ CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y -# CONFIG_KEXEC_VERIFY_SIG is not set +# CONFIG_KEXEC_SIG is not set CONFIG_CRASH_DUMP=y CONFIG_XEN_DOM0=y CONFIG_XEN=y @@ -390,6 +391,7 @@ CONFIG_HARDEN_EL2_VECTORS=y CONFIG_ARM64_SSBD=y CONFIG_RODATA_FULL_DEFAULT_ENABLED=y # CONFIG_ARM64_SW_TTBR0_PAN is not set +CONFIG_ARM64_TAGGED_ADDR_ABI=y CONFIG_COMPAT=y CONFIG_KUSER_HELPERS=y CONFIG_ARMV8_DEPRECATED=y @@ -492,6 +494,7 @@ CONFIG_DT_IDLE_STATES=y # ARM CPU Idle Drivers # CONFIG_ARM_CPUIDLE=y +# CONFIG_ARM_PSCI_CPUIDLE is not set # end of ARM CPU Idle Drivers # end of CPU Idle @@ -521,6 +524,7 @@ CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=m CONFIG_CPUFREQ_DT_PLATDEV=y CONFIG_ACPI_CPPC_CPUFREQ=m +CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m # CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set # CONFIG_ARM_ARMADA_8K_CPUFREQ is not set CONFIG_ARM_IMX_CPUFREQ_DT=m @@ -550,6 +554,7 @@ CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_QCOM_SCM=y CONFIG_QCOM_SCM_64=y # CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set +# CONFIG_TURRIS_MOX_RWTM is not set CONFIG_HAVE_ARM_SMCCC=y CONFIG_ARM_PSCI_FW=y # CONFIG_ARM_PSCI_CHECKER is not set @@ -573,6 +578,7 @@ CONFIG_EFI_ARMSTUB_DTB_LOADER=y # end of EFI (Extensible Firmware Interface) Support CONFIG_EFI_EARLYCON=y +# CONFIG_IMX_DSP is not set CONFIG_IMX_SCU=y CONFIG_IMX_SCU_PD=y CONFIG_MESON_SM=y @@ -681,6 +687,7 @@ CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y @@ -691,6 +698,7 @@ CONFIG_ARCH_HAS_KEEPINITRD=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_HAS_SET_DIRECT_MAP=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y @@ -725,6 +733,7 @@ CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_ARCH_MMAP_RND_BITS=18 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y @@ -740,6 +749,7 @@ CONFIG_REFCOUNT_FULL=y CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y CONFIG_ARCH_USE_MEMREMAP_PROT=y # CONFIG_LOCK_EVENT_COUNTS is not set +CONFIG_ARCH_HAS_RELR=y # # GCOV-based kernel profiling @@ -768,12 +778,16 @@ CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_ASM_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y +CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y @@ -784,6 +798,7 @@ CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_CMDLINE_PARSER is not set CONFIG_BLK_WBT=y # CONFIG_BLK_CGROUP_IOLATENCY is not set +CONFIG_BLK_CGROUP_IOCOST=y CONFIG_BLK_WBT_MQ=y CONFIG_BLK_DEBUG_FS=y CONFIG_BLK_SED_OPAL=y @@ -956,9 +971,11 @@ CONFIG_GENERIC_EARLY_IOREMAP=y # CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set # CONFIG_IDLE_PAGE_TRACKING is not set CONFIG_ARCH_HAS_PTE_DEVMAP=y +CONFIG_HMM_MIRROR=y CONFIG_FRAME_VECTOR=y # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set +# CONFIG_READ_ONLY_THP_FOR_FS is not set CONFIG_ARCH_HAS_PTE_SPECIAL=y # end of Memory Management options @@ -1494,9 +1511,7 @@ CONFIG_NET_DSA_TAG_GSWIP=m CONFIG_NET_DSA_TAG_DSA=m CONFIG_NET_DSA_TAG_EDSA=m CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m CONFIG_NET_DSA_TAG_QCA=m CONFIG_NET_DSA_TAG_LAN9303=m CONFIG_NET_DSA_TAG_SJA1105=m @@ -1624,6 +1639,7 @@ CONFIG_NET_ACT_CT=m CONFIG_NET_IFE_SKBMARK=m CONFIG_NET_IFE_SKBPRIO=m CONFIG_NET_IFE_SKBTCINDEX=m +# CONFIG_NET_TC_SKB_EXT is not set CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=m @@ -1671,7 +1687,7 @@ CONFIG_NET_FLOW_LIMIT=y # Network testing # CONFIG_NET_PKTGEN=m -CONFIG_NET_DROP_MONITOR=m +CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options @@ -1680,6 +1696,7 @@ CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m CONFIG_CAN_GW=m +CONFIG_CAN_J1939=m # # CAN Device Drivers @@ -1691,6 +1708,7 @@ CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_FLEXCAN=m # CONFIG_CAN_GRCAN is not set +CONFIG_CAN_KVASER_PCIEFD=m # CONFIG_CAN_XILINXCAN is not set # CONFIG_CAN_C_CAN is not set # CONFIG_CAN_CC770 is not set @@ -1698,13 +1716,14 @@ CONFIG_CAN_FLEXCAN=m # CONFIG_CAN_M_CAN is not set # CONFIG_CAN_PEAK_PCIEFD is not set CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -# CONFIG_CAN_SJA1000_PLATFORM is not set CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_F81601=m +CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SJA1000_ISA=m +# CONFIG_CAN_SJA1000_PLATFORM is not set CONFIG_CAN_SOFTING=m # @@ -1950,6 +1969,8 @@ CONFIG_PCIE_ARMADA_8K=y CONFIG_PCIE_KIRIN=y # CONFIG_PCIE_HISI_STB is not set # CONFIG_PCI_MESON is not set +CONFIG_PCIE_TEGRA194=m +# CONFIG_PCIE_AL is not set # end of DesignWare PCI Core Support # end of PCI controller drivers @@ -2016,6 +2037,7 @@ CONFIG_GENERIC_ARCH_TOPOLOGY=y # Bus devices # # CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_MOXTET=m # CONFIG_HISILICON_LPC is not set # CONFIG_IMX_WEIM is not set CONFIG_QCOM_EBI2=y @@ -2036,13 +2058,13 @@ CONFIG_GNSS_SIRF_SERIAL=m CONFIG_GNSS_UBX_SERIAL=m CONFIG_MTD=m # CONFIG_MTD_TESTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_OF_PARTS=m -CONFIG_MTD_AR7_PARTS=m # # Partition parsers # +CONFIG_MTD_AR7_PARTS=m +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=m # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # end of Partition parsers @@ -2101,7 +2123,6 @@ CONFIG_MTD_PLATRAM=m CONFIG_MTD_DATAFLASH=m # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set # CONFIG_MTD_DATAFLASH_OTP is not set -CONFIG_MTD_M25P80=m # CONFIG_MTD_MCHP23K256 is not set CONFIG_MTD_SST25L=m # CONFIG_MTD_SLRAM is not set @@ -2139,6 +2160,7 @@ CONFIG_MTD_NAND_MXC=m CONFIG_MTD_NAND_SUNXI=m CONFIG_MTD_NAND_HISI504=m CONFIG_MTD_NAND_QCOM=m +CONFIG_MTD_NAND_MXIC=m CONFIG_MTD_NAND_TEGRA=m CONFIG_MTD_NAND_MESON=m CONFIG_MTD_NAND_GPIO=m @@ -2255,7 +2277,6 @@ CONFIG_AD525X_DPOT_I2C=m CONFIG_AD525X_DPOT_SPI=m # CONFIG_DUMMY_IRQ is not set # CONFIG_PHANTOM is not set -CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m @@ -2618,6 +2639,7 @@ CONFIG_DM_CACHE=m CONFIG_DM_CACHE_SMQ=m CONFIG_DM_WRITECACHE=m CONFIG_DM_ERA=m +CONFIG_DM_CLONE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -2630,6 +2652,7 @@ CONFIG_DM_DUST=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m +CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m CONFIG_DM_LOG_WRITES=m @@ -2730,11 +2753,13 @@ CONFIG_ATM_SOLOS=m # CONFIG_NET_DSA_MT7530 is not set CONFIG_NET_DSA_MV88E6060=m # CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set +# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set CONFIG_NET_DSA_MV88E6XXX=m CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y # CONFIG_NET_DSA_MV88E6XXX_PTP is not set CONFIG_NET_DSA_SJA1105=m CONFIG_NET_DSA_SJA1105_PTP=y +# CONFIG_NET_DSA_SJA1105_TAS is not set # CONFIG_NET_DSA_QCA8K is not set CONFIG_NET_DSA_REALTEK_SMI=m # CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set @@ -2914,6 +2939,7 @@ CONFIG_MLX5_MPFS=y CONFIG_MLX5_ESWITCH=y CONFIG_MLX5_CORE_EN_DCB=y # CONFIG_MLX5_CORE_IPOIB is not set +CONFIG_MLX5_SW_STEERING=y # CONFIG_MLXSW_CORE is not set # CONFIG_MLXFW is not set CONFIG_NET_VENDOR_MICREL=y @@ -2954,13 +2980,14 @@ CONFIG_NET_VENDOR_OKI=y CONFIG_NET_VENDOR_PACKET_ENGINES=y CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m +CONFIG_NET_VENDOR_PENSANDO=y +CONFIG_IONIC=m CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_QED=m CONFIG_QED_LL2=y @@ -3071,6 +3098,7 @@ CONFIG_SWPHY=y # MII PHY device drivers # # CONFIG_SFP is not set +CONFIG_ADIN_PHY=m CONFIG_AMD_PHY=m CONFIG_AQUANTIA_PHY=m CONFIG_AX88796B_PHY=m @@ -3200,6 +3228,7 @@ CONFIG_ATH9K_PCI=y CONFIG_ATH9K_RFKILL=y # CONFIG_ATH9K_CHANNEL_CONTEXT is not set CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_PCI_NO_EEPROM=m CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS is not set # CONFIG_ATH9K_HWRNG is not set @@ -3299,7 +3328,6 @@ CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y # CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set # # Debugging Options @@ -3656,11 +3684,11 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set +CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_BCM2835AUX=y CONFIG_SERIAL_8250_FSL=y CONFIG_SERIAL_8250_DW=y # CONFIG_SERIAL_8250_RT288X is not set -CONFIG_SERIAL_8250_MOXA=m CONFIG_SERIAL_OF_PLATFORM=y # @@ -3696,6 +3724,7 @@ CONFIG_SERIAL_QCOM_GENI=m CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 # CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_FSL_LINFLEXUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_MVEBU_CONSOLE=y @@ -3740,6 +3769,8 @@ CONFIG_DEVPORT=y # CONFIG_XILLYBUS is not set # end of Character devices +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set + # # I2C support # @@ -3994,6 +4025,7 @@ CONFIG_PINCTRL_MSM8996=y # CONFIG_PINCTRL_QDF2XXX is not set CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y +# CONFIG_PINCTRL_SC7180 is not set # CONFIG_PINCTRL_SDM660 is not set # CONFIG_PINCTRL_SDM845 is not set CONFIG_PINCTRL_SM8150=m @@ -4107,6 +4139,7 @@ CONFIG_GPIO_MAX77620=y # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set # CONFIG_GPIO_XRA1403 is not set +CONFIG_GPIO_MOXTET=m # end of SPI GPIO expanders # @@ -4128,6 +4161,7 @@ CONFIG_W1_MASTER_DS2482=m CONFIG_W1_MASTER_MXC=m # CONFIG_W1_MASTER_DS1WM is not set CONFIG_W1_MASTER_GPIO=m +# CONFIG_W1_MASTER_SGI is not set # end of 1-wire Bus Masters # @@ -4146,6 +4180,7 @@ CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set CONFIG_W1_SLAVE_DS2438=m +# CONFIG_W1_SLAVE_DS250X is not set CONFIG_W1_SLAVE_DS2780=m CONFIG_W1_SLAVE_DS2781=m CONFIG_W1_SLAVE_DS28E04=m @@ -4236,6 +4271,7 @@ CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m +# CONFIG_SENSORS_AS370 is not set CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_ARM_SCMI=m # CONFIG_SENSORS_ASPEED is not set @@ -4330,7 +4366,6 @@ CONFIG_SENSORS_SCH5627=m # CONFIG_SENSORS_STTS751 is not set CONFIG_SENSORS_SMM665=m # CONFIG_SENSORS_ADC128D818 is not set -CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m @@ -4445,6 +4480,7 @@ CONFIG_SUNXI_WATCHDOG=m # CONFIG_MAX77620_WATCHDOG is not set CONFIG_IMX2_WDT=m CONFIG_IMX_SC_WDT=m +CONFIG_IMX7ULP_WDT=m CONFIG_TEGRA_WATCHDOG=m CONFIG_QCOM_WDT=m CONFIG_MESON_GXBB_WATCHDOG=m @@ -4507,8 +4543,7 @@ CONFIG_MFD_CORE=y CONFIG_MFD_AXP20X=m # CONFIG_MFD_AXP20X_I2C is not set CONFIG_MFD_AXP20X_RSB=m -CONFIG_MFD_CROS_EC=y -# CONFIG_MFD_CROS_EC_CHARDEV is not set +CONFIG_MFD_CROS_EC_DEV=m CONFIG_MFD_MADERA=m CONFIG_MFD_MADERA_I2C=m CONFIG_MFD_MADERA_SPI=m @@ -4660,6 +4695,7 @@ CONFIG_REGULATOR_QCOM_SPMI=m CONFIG_REGULATOR_RK808=m CONFIG_REGULATOR_SLG51000=m CONFIG_REGULATOR_SY8106A=m +CONFIG_REGULATOR_SY8824X=m # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set @@ -4726,6 +4762,7 @@ CONFIG_MEDIA_CONTROLLER_DVB=y CONFIG_VIDEO_DEV=m # CONFIG_VIDEO_V4L2_SUBDEV_API is not set CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_I2C=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m @@ -5467,6 +5504,7 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_AMDGPU=m CONFIG_DRM_AMDGPU_SI=y CONFIG_DRM_AMDGPU_CIK=y +CONFIG_DRM_AMDGPU_USERPTR=y # CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set # @@ -5534,12 +5572,16 @@ CONFIG_DRM_PANEL_SIMPLE=m # CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set # CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set # CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LB035Q02 is not set # CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set # CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set # CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m # CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set # CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set # CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set # CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set # CONFIG_DRM_PANEL_RONBO_RB070D30 is not set @@ -5550,9 +5592,13 @@ CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set # CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set # CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set # CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set # CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set # CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set +# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set # CONFIG_DRM_PANEL_TPO_TPG110 is not set # CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set # end of Display Panels @@ -5595,11 +5641,17 @@ CONFIG_DRM_ETNAVIV_THERMAL=y # CONFIG_DRM_ARCPGU is not set CONFIG_DRM_HISI_HIBMC=m CONFIG_DRM_HISI_KIRIN=m -CONFIG_HISI_KIRIN_DW_DSI=m # CONFIG_DRM_MXSFB is not set CONFIG_DRM_MESON=m CONFIG_DRM_MESON_DW_HDMI=m -# CONFIG_DRM_TINYDRM is not set +CONFIG_DRM_GM12U320=m +# CONFIG_TINYDRM_HX8357D is not set +# CONFIG_TINYDRM_ILI9225 is not set +# CONFIG_TINYDRM_ILI9341 is not set +# CONFIG_TINYDRM_MI0283QT is not set +# CONFIG_TINYDRM_REPAPER is not set +# CONFIG_TINYDRM_ST7586 is not set +# CONFIG_TINYDRM_ST7735R is not set # CONFIG_DRM_PL111 is not set # CONFIG_DRM_XEN is not set CONFIG_DRM_LIMA=m @@ -5844,6 +5896,7 @@ CONFIG_SND_VIRTUOSO=m # CONFIG_SND_HDA=m CONFIG_SND_HDA_INTEL=m +# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set CONFIG_SND_HDA_TEGRA=m CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y @@ -5868,8 +5921,10 @@ CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_HDA_CORE=m CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_ALIGNED_MMIO=y CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_PREALLOC_SIZE=2048 +CONFIG_SND_INTEL_NHLT=m CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m @@ -6120,6 +6175,7 @@ CONFIG_SND_SOC_TLV320AIC23_I2C=m # CONFIG_SND_SOC_TS3A227E is not set # CONFIG_SND_SOC_TSCS42XX is not set # CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_UDA1334 is not set # CONFIG_SND_SOC_WM8510 is not set # CONFIG_SND_SOC_WM8523 is not set # CONFIG_SND_SOC_WM8524 is not set @@ -6190,6 +6246,7 @@ CONFIG_HID_MACALLY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CMEDIA=m CONFIG_HID_CP2112=m +CONFIG_HID_CREATIVE_SB0540=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y @@ -6305,6 +6362,9 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y +CONFIG_USB_LED_TRIG=y +CONFIG_USB_ULPI_BUS=m +CONFIG_USB_CONN_GPIO=m CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=m CONFIG_USB_PCI=y @@ -6321,9 +6381,6 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_LEDS_TRIGGER_USBPORT=m CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers @@ -6357,8 +6414,6 @@ CONFIG_USB_OHCI_HCD_PLATFORM=m CONFIG_USB_U132_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m # CONFIG_USB_HCD_BCMA is not set # CONFIG_USB_HCD_SSB is not set # CONFIG_USB_HCD_TEST_MODE is not set @@ -6408,6 +6463,10 @@ CONFIG_USBIP_VHCI_NR_HCS=8 CONFIG_USBIP_HOST=m CONFIG_USBIP_VUDC=m # CONFIG_USBIP_DEBUG is not set +CONFIG_USB_CDNS3=m +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set +CONFIG_USB_CDNS3_PCI_WRAP=m CONFIG_USB_MUSB_HDRC=m # CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_GADGET is not set @@ -6527,7 +6586,6 @@ CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m @@ -6663,12 +6721,6 @@ CONFIG_USB_G_SERIAL=m # CONFIG_USB_G_WEBCAM is not set # CONFIG_TYPEC is not set CONFIG_USB_ROLE_SWITCH=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m CONFIG_MMC=y CONFIG_PWRSEQ_EMMC=y # CONFIG_PWRSEQ_SD8787 is not set @@ -6692,6 +6744,7 @@ CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m CONFIG_MMC_SDHCI_OF_ARASAN=m +CONFIG_MMC_SDHCI_OF_ASPEED=m # CONFIG_MMC_SDHCI_OF_AT91 is not set CONFIG_MMC_SDHCI_OF_ESDHC=m # CONFIG_MMC_SDHCI_OF_DWCMSHC is not set @@ -6893,6 +6946,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_HYM8563 is not set # CONFIG_RTC_DRV_MAX6900 is not set CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_MESON_VRTC=m CONFIG_RTC_DRV_RK808=m # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set @@ -7044,6 +7098,7 @@ CONFIG_DMA_ENGINE_RAID=y CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set # end of DMABUF options # CONFIG_AUXDISPLAY is not set @@ -7106,6 +7161,7 @@ CONFIG_XEN_EFI=y CONFIG_XEN_AUTO_XLATE=y # end of Xen driver support +# CONFIG_GREYBUS is not set CONFIG_STAGING=y # CONFIG_PRISM2_USB is not set # CONFIG_COMEDI is not set @@ -7215,7 +7271,6 @@ CONFIG_SPEAKUP_SYNTH_DUMMY=m # CONFIG_WILC1000_SPI is not set # CONFIG_MOST is not set # CONFIG_KS7010 is not set -# CONFIG_GREYBUS is not set CONFIG_BCM_VIDEOCORE=y # CONFIG_BCM2835_VCHIQ is not set # CONFIG_SND_BCM2835 is not set @@ -7229,25 +7284,41 @@ CONFIG_BCM_VIDEOCORE=y # end of Gasket devices # CONFIG_XIL_AXIS_FIFO is not set -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set # CONFIG_FIELDBUS_DEV is not set # CONFIG_KPC2000 is not set +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_EXFAT_FS=m +CONFIG_EXFAT_DONT_MOUNT_VFAT=y +CONFIG_EXFAT_DISCARD=y +# CONFIG_EXFAT_DELAYED_SYNC is not set +# CONFIG_EXFAT_KERNEL_DEBUG is not set +# CONFIG_EXFAT_DEBUG_MSG is not set +CONFIG_EXFAT_DEFAULT_CODEPAGE=437 +CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" +CONFIG_QLGE=m # CONFIG_GOLDFISH is not set +CONFIG_MFD_CROS_EC=y CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_TBMC=m +CONFIG_CROS_EC=y CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_RPMSG=m CONFIG_CROS_EC_SPI=m CONFIG_CROS_EC_PROTO=y CONFIG_CROS_KBD_LED_BACKLIGHT=m +CONFIG_CROS_EC_CHARDEV=m +CONFIG_CROS_EC_LIGHTBAR=m +CONFIG_CROS_EC_VBC=m +CONFIG_CROS_EC_DEBUGFS=m +CONFIG_CROS_EC_SYSFS=m CONFIG_CROS_USBPD_LOGGER=m # CONFIG_MELLANOX_PLATFORM is not set CONFIG_CLKDEV_LOOKUP=y @@ -7294,9 +7365,9 @@ CONFIG_STUB_CLK_HI6220=y CONFIG_MXC_CLK=y CONFIG_MXC_CLK_SCU=y CONFIG_CLK_IMX8MM=y +CONFIG_CLK_IMX8MN=y CONFIG_CLK_IMX8MQ=y CONFIG_CLK_IMX8QXP=y -CONFIG_COMMON_CLK_MESON_INPUT=y CONFIG_COMMON_CLK_MESON_REGMAP=y CONFIG_COMMON_CLK_MESON_DUALDIV=y CONFIG_COMMON_CLK_MESON_MPLL=y @@ -7306,10 +7377,12 @@ CONFIG_COMMON_CLK_MESON_SCLK_DIV=m CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y CONFIG_COMMON_CLK_MESON_AO_CLKC=y CONFIG_COMMON_CLK_MESON_EE_CLKC=y +CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y CONFIG_COMMON_CLK_GXBB=y CONFIG_COMMON_CLK_AXG=y CONFIG_COMMON_CLK_AXG_AUDIO=m CONFIG_COMMON_CLK_G12A=y +CONFIG_ARMADA_AP_CP_HELPER=y CONFIG_ARMADA_37XX_CLK=y CONFIG_ARMADA_AP806_SYSCON=y CONFIG_ARMADA_CP110_SYSCON=y @@ -7348,6 +7421,7 @@ CONFIG_SDM_GPUCC_845=m CONFIG_SDM_VIDEOCC_845=m CONFIG_SDM_DISPCC_845=m CONFIG_SDM_LPASSCC_845=m +# CONFIG_SM_GCC_8150 is not set # CONFIG_SPMI_PMIC_CLKDIV is not set # CONFIG_QCOM_HFPLL is not set # CONFIG_KPSS_XCC is not set @@ -7388,6 +7462,7 @@ CONFIG_ARM64_ERRATUM_858921=y CONFIG_SUN50I_ERRATUM_UNKNOWN1=y CONFIG_ARM_TIMER_SP804=y CONFIG_CLKSRC_VERSATILE=y +CONFIG_TIMER_IMX_SYS_CTR=y # end of Clock Source drivers CONFIG_MAILBOX=y @@ -7459,6 +7534,7 @@ CONFIG_MESON_CANVAS=m CONFIG_MESON_CLK_MEASURE=y CONFIG_MESON_GX_SOCINFO=y CONFIG_MESON_GX_PM_DOMAINS=y +CONFIG_MESON_EE_PM_DOMAINS=y CONFIG_MESON_MX_SOCINFO=y # end of Amlogic SoC drivers @@ -7492,7 +7568,7 @@ CONFIG_IMX_GPCV2_PM_DOMAINS=y # Qualcomm SoC drivers # CONFIG_QCOM_AOSS_QMP=m -# CONFIG_QCOM_COMMAND_DB is not set +CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=m CONFIG_QCOM_GSBI=m CONFIG_QCOM_LLCC=m @@ -7539,6 +7615,7 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m # # DEVFREQ Drivers # +CONFIG_ARM_TEGRA_DEVFREQ=m # CONFIG_ARM_RK3399_DMC_DEVFREQ is not set # CONFIG_PM_DEVFREQ_EVENT is not set CONFIG_EXTCON=y @@ -7589,7 +7666,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_DMARD09 is not set # CONFIG_DMARD10 is not set CONFIG_HID_SENSOR_ACCEL_3D=m -# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set # CONFIG_IIO_ST_ACCEL_3AXIS is not set # CONFIG_KXSD9 is not set # CONFIG_KXCJK1013 is not set @@ -7820,6 +7896,7 @@ CONFIG_DHT11=m # Inertial measurement units # # CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set # CONFIG_ADIS16480 is not set # CONFIG_BMI160_I2C is not set # CONFIG_BMI160_SPI is not set @@ -7856,6 +7933,7 @@ CONFIG_HID_SENSOR_PROX=m # CONFIG_LV0104CS is not set # CONFIG_MAX44000 is not set # CONFIG_MAX44009 is not set +# CONFIG_NOA1305 is not set # CONFIG_OPT3001 is not set # CONFIG_PA12203001 is not set # CONFIG_SI1133 is not set @@ -7919,6 +7997,7 @@ CONFIG_HID_SENSOR_DEVICE_ROTATION=m # # CONFIG_AD5272 is not set # CONFIG_DS1803 is not set +# CONFIG_MAX5432 is not set # CONFIG_MAX5481 is not set # CONFIG_MAX5487 is not set # CONFIG_MCP4018 is not set @@ -8045,6 +8124,7 @@ CONFIG_RESET_MESON=y # CONFIG_RESET_MESON_AUDIO_ARB is not set # CONFIG_RESET_QCOM_AOSS is not set # CONFIG_RESET_QCOM_PDC is not set +CONFIG_RESET_SCMI=y CONFIG_RESET_SIMPLE=y CONFIG_RESET_SUNXI=y # CONFIG_RESET_TI_SYSCON is not set @@ -8103,6 +8183,7 @@ CONFIG_PHY_ROCKCHIP_PCIE=m # CONFIG_PHY_ROCKCHIP_USB is not set # CONFIG_PHY_SAMSUNG_USB2 is not set CONFIG_PHY_TEGRA_XUSB=m +CONFIG_PHY_TEGRA194_P2U=m CONFIG_PHY_TUSB1210=m # end of PHY Subsystem @@ -8258,6 +8339,9 @@ CONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set +CONFIG_FS_VERITY=y +# CONFIG_FS_VERITY_DEBUG is not set +# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y @@ -8275,6 +8359,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=m CONFIG_CUSE=m +CONFIG_VIRTIO_FS=m CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y @@ -8427,6 +8512,12 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +CONFIG_EROFS_FS=m +# CONFIG_EROFS_FS_DEBUG is not set +CONFIG_EROFS_FS_XATTR=y +CONFIG_EROFS_FS_POSIX_ACL=y +CONFIG_EROFS_FS_SECURITY=y +# CONFIG_EROFS_FS_ZIP is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m @@ -8456,7 +8547,6 @@ CONFIG_NFSD_BLOCKLAYOUT=y # CONFIG_NFSD_SCSILAYOUT is not set # CONFIG_NFSD_FLEXFILELAYOUT is not set CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y @@ -8597,6 +8687,7 @@ CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y # CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y # CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -8691,10 +8782,7 @@ CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS1280=m +CONFIG_CRYPTO_AEGIS128_SIMD=y CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_ECHAINIV=m @@ -8713,6 +8801,7 @@ CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_KEYWRAP is not set CONFIG_CRYPTO_NHPOLY1305=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_ESSIV=m # # Hash modes @@ -8739,6 +8828,7 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m @@ -8750,6 +8840,7 @@ CONFIG_CRYPTO_WP512=m # # Ciphers # +CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_ANUBIS=m @@ -8761,6 +8852,7 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_LIB_DES=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m @@ -8834,6 +8926,7 @@ CONFIG_CRYPTO_DEV_VIRTIO=m CONFIG_CRYPTO_DEV_SAFEXCEL=m # CONFIG_CRYPTO_DEV_CCREE is not set CONFIG_CRYPTO_DEV_HISI_SEC=m +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y @@ -8941,7 +9034,6 @@ CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y -CONFIG_ARCH_HAS_DMA_MMAP_PGPROT=y CONFIG_DMA_VIRT_OPS=y CONFIG_SWIOTLB=y CONFIG_DMA_REMAP=y @@ -8976,8 +9068,6 @@ CONFIG_OID_REGISTRY=y CONFIG_UCS2_STRING=y CONFIG_HAVE_GENERIC_VDSO=y CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_COMPAT_VDSO=y -CONFIG_CROSS_COMPILE_COMPAT_VDSO="" CONFIG_FONT_SUPPORT=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y @@ -9019,7 +9109,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_INSTALL is not set CONFIG_OPTIMIZE_INLINING=y @@ -9138,6 +9227,7 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m # CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set +CONFIG_FUNCTION_ERROR_INJECTION=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y @@ -9177,6 +9267,7 @@ CONFIG_DYNAMIC_EVENTS=y CONFIG_PROBE_EVENTS=y CONFIG_DYNAMIC_FTRACE=y # CONFIG_FUNCTION_PROFILER is not set +# CONFIG_BPF_KPROBE_OVERRIDE is not set CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_HIST_TRIGGERS is not set diff --git a/gnu/packages/aux-files/linux-libre/5.3-i686.conf b/gnu/packages/aux-files/linux-libre/5.4-i686.conf index 47f1538026..4a1ac43279 100644 --- a/gnu/packages/aux-files/linux-libre/5.3-i686.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-i686.conf @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.3.1-gnu Kernel Configuration +# Linux/i386 5.4.5 Kernel Configuration # # @@ -247,7 +247,6 @@ CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y # end of General setup -# CONFIG_64BIT is not set CONFIG_X86_32=y CONFIG_FORCE_DYNAMIC_FTRACE=y CONFIG_X86=y @@ -321,6 +320,7 @@ CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_PVH=y CONFIG_KVM_GUEST=y +CONFIG_ARCH_CPUIDLE_HALTPOLL=y CONFIG_PVH=y CONFIG_KVM_DEBUG_FS=y # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set @@ -422,7 +422,6 @@ CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y CONFIG_X86_PAE=y # CONFIG_X86_CPA_STATISTICS is not set -CONFIG_ARCH_HAS_MEM_ENCRYPT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -443,6 +442,9 @@ CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y CONFIG_X86_INTEL_UMIP=y +CONFIG_X86_INTEL_TSX_MODE_OFF=y +# CONFIG_X86_INTEL_TSX_MODE_ON is not set +# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set CONFIG_EFI=y CONFIG_EFI_STUB=y CONFIG_SECCOMP=y @@ -618,6 +620,8 @@ CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y CONFIG_CPU_IDLE_GOV_TEO=y +CONFIG_CPU_IDLE_GOV_HALTPOLL=y +CONFIG_HALTPOLL_CPUIDLE=m # end of CPU Idle CONFIG_INTEL_IDLE=y @@ -686,6 +690,7 @@ CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH=y # CONFIG_EFI_TEST is not set CONFIG_APPLE_PROPERTIES=y CONFIG_RESET_ATTACK_MITIGATION=y +# CONFIG_EFI_RCI2_TABLE is not set # end of EFI (Extensible Firmware Interface) Support CONFIG_UEFI_CPER=y @@ -758,6 +763,7 @@ CONFIG_ARCH_HAS_SET_DIRECT_MAP=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y @@ -812,6 +818,7 @@ CONFIG_REFCOUNT_FULL=y CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y CONFIG_ARCH_USE_MEMREMAP_PROT=y # CONFIG_LOCK_EVENT_COUNTS is not set +CONFIG_ARCH_HAS_MEM_ENCRYPT=y # # GCOV-based kernel profiling @@ -840,11 +847,15 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y +CONFIG_ASM_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +CONFIG_UNUSED_SYMBOLS=y CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y +CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y @@ -855,6 +866,7 @@ CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLK_CMDLINE_PARSER=y CONFIG_BLK_WBT=y # CONFIG_BLK_CGROUP_IOLATENCY is not set +CONFIG_BLK_CGROUP_IOCOST=y CONFIG_BLK_WBT_MQ=y CONFIG_BLK_DEBUG_FS=y CONFIG_BLK_DEBUG_FS_ZONED=y @@ -977,10 +989,12 @@ CONFIG_PGTABLE_MAPPING=y # CONFIG_ZSMALLOC_STAT is not set CONFIG_GENERIC_EARLY_IOREMAP=y CONFIG_IDLE_PAGE_TRACKING=y +CONFIG_HMM_MIRROR=y CONFIG_FRAME_VECTOR=y # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set CONFIG_GUP_GET_PTE_LOW_HIGH=y +# CONFIG_READ_ONLY_THP_FOR_FS is not set CONFIG_ARCH_HAS_PTE_SPECIAL=y # end of Memory Management options @@ -1523,9 +1537,7 @@ CONFIG_NET_DSA_TAG_GSWIP=m CONFIG_NET_DSA_TAG_DSA=m CONFIG_NET_DSA_TAG_EDSA=m CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m CONFIG_NET_DSA_TAG_QCA=m CONFIG_NET_DSA_TAG_LAN9303=m CONFIG_NET_DSA_TAG_SJA1105=m @@ -1658,6 +1670,7 @@ CONFIG_NET_ACT_CT=m CONFIG_NET_IFE_SKBMARK=m CONFIG_NET_IFE_SKBPRIO=m CONFIG_NET_IFE_SKBTCINDEX=m +# CONFIG_NET_TC_SKB_EXT is not set CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=y @@ -1741,6 +1754,7 @@ CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m CONFIG_CAN_GW=m +CONFIG_CAN_J1939=m # # CAN Device Drivers @@ -1751,6 +1765,7 @@ CONFIG_CAN_SLCAN=m CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_JANZ_ICAN3=m +CONFIG_CAN_KVASER_PCIEFD=m CONFIG_PCH_CAN=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m @@ -1760,17 +1775,20 @@ CONFIG_CAN_CC770_ISA=m CONFIG_CAN_CC770_PLATFORM=m CONFIG_CAN_IFI_CANFD=m CONFIG_CAN_M_CAN=m +CONFIG_CAN_M_CAN_PLATFORM=m +CONFIG_CAN_M_CAN_TCAN4X5X=m CONFIG_CAN_PEAK_PCIEFD=m CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_EMS_PCMCIA=m CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCMCIA=m +CONFIG_CAN_EMS_PCMCIA=m +CONFIG_CAN_F81601=m +CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PEAK_PCMCIA=m CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SJA1000_ISA=m +CONFIG_CAN_SJA1000_PLATFORM=m CONFIG_CAN_TSCAN1=m CONFIG_CAN_SOFTING=m CONFIG_CAN_SOFTING_CS=m @@ -2128,6 +2146,7 @@ CONFIG_REGMAP_W1=m CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_REGMAP_SCCB=m +CONFIG_REGMAP_I3C=m CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # end of Generic Driver Options @@ -2146,12 +2165,12 @@ CONFIG_GNSS_SIRF_SERIAL=m CONFIG_GNSS_UBX_SERIAL=m CONFIG_MTD=m # CONFIG_MTD_TESTS is not set -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AR7_PARTS=m # # Partition parsers # +CONFIG_MTD_AR7_PARTS=m +CONFIG_MTD_CMDLINE_PARTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -2228,7 +2247,6 @@ CONFIG_MTD_PMC551=m CONFIG_MTD_DATAFLASH=m # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set CONFIG_MTD_DATAFLASH_OTP=y -CONFIG_MTD_M25P80=m CONFIG_MTD_MCHP23K256=m CONFIG_MTD_SST25L=m CONFIG_MTD_SLRAM=m @@ -2264,6 +2282,7 @@ CONFIG_MTD_NAND_DENALI=m CONFIG_MTD_NAND_DENALI_PCI=m CONFIG_MTD_NAND_CAFE=m CONFIG_MTD_NAND_CS553X=m +CONFIG_MTD_NAND_MXIC=m CONFIG_MTD_NAND_GPIO=m CONFIG_MTD_NAND_PLATFORM=m @@ -2409,7 +2428,6 @@ CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m CONFIG_INTEL_MID_PTI=m -CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m @@ -2814,6 +2832,7 @@ CONFIG_DM_CACHE=m CONFIG_DM_CACHE_SMQ=m CONFIG_DM_WRITECACHE=m CONFIG_DM_ERA=m +CONFIG_DM_CLONE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -2827,6 +2846,7 @@ CONFIG_DM_DUST=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m +CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m CONFIG_DM_LOG_WRITES=m @@ -2971,12 +2991,16 @@ CONFIG_NET_DSA_MT7530=m CONFIG_NET_DSA_MV88E6060=m CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m CONFIG_NET_DSA_MICROCHIP_KSZ9477=m +CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m +CONFIG_NET_DSA_MICROCHIP_KSZ8795=m +CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI=m CONFIG_NET_DSA_MV88E6XXX=m CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y # CONFIG_NET_DSA_MV88E6XXX_PTP is not set CONFIG_NET_DSA_SJA1105=m CONFIG_NET_DSA_SJA1105_PTP=y +# CONFIG_NET_DSA_SJA1105_TAS is not set CONFIG_NET_DSA_QCA8K=m CONFIG_NET_DSA_REALTEK_SMI=m CONFIG_NET_DSA_SMSC_LAN9303=m @@ -3145,6 +3169,7 @@ CONFIG_MLX5_MPFS=y CONFIG_MLX5_ESWITCH=y CONFIG_MLX5_CORE_EN_DCB=y # CONFIG_MLX5_CORE_IPOIB is not set +CONFIG_MLX5_SW_STEERING=y CONFIG_MLXSW_CORE=m CONFIG_MLXSW_CORE_HWMON=y CONFIG_MLXSW_CORE_THERMAL=y @@ -3200,13 +3225,13 @@ CONFIG_ETHOC=m CONFIG_NET_VENDOR_PACKET_ENGINES=y CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m +CONFIG_NET_VENDOR_PENSANDO=y CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_QED=m CONFIG_QED_LL2=y @@ -3312,6 +3337,7 @@ CONFIG_SWPHY=y # MII PHY device drivers # CONFIG_SFP=m +CONFIG_ADIN_PHY=m CONFIG_AMD_PHY=m CONFIG_AQUANTIA_PHY=m CONFIG_AX88796B_PHY=m @@ -3438,6 +3464,7 @@ CONFIG_ATH9K_WOW=y CONFIG_ATH9K_RFKILL=y CONFIG_ATH9K_CHANNEL_CONTEXT=y CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_PCI_NO_EEPROM=m CONFIG_ATH9K_HTC=m CONFIG_ATH9K_HTC_DEBUGFS=y CONFIG_ATH9K_HWRNG=y @@ -3545,7 +3572,6 @@ CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y # CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set # # Debugging Options @@ -3714,9 +3740,6 @@ CONFIG_PC300TOO=m CONFIG_N2=m CONFIG_C101=m CONFIG_FARSYNC=m -CONFIG_DSCC4=m -CONFIG_DSCC4_PCISYNC=y -CONFIG_DSCC4_PCI_RST=y CONFIG_DLCI=m CONFIG_DLCI_MAX=8 CONFIG_SDLA=m @@ -3892,6 +3915,7 @@ CONFIG_JOYSTICK_WALKERA0701=m CONFIG_JOYSTICK_PSXPAD_SPI=m # CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set CONFIG_JOYSTICK_PXRC=m +CONFIG_JOYSTICK_FSIA6B=m CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m @@ -4162,11 +4186,11 @@ CONFIG_SERIAL_8250_HUB6=m CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=m CONFIG_SERIAL_8250_RT288X=y CONFIG_SERIAL_8250_LPSS=m CONFIG_SERIAL_8250_MID=m -CONFIG_SERIAL_8250_MOXA=m # # Non-8250 serial port support @@ -4198,6 +4222,7 @@ CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 CONFIG_SERIAL_FSL_LPUART=m +CONFIG_SERIAL_FSL_LINFLEXUART=m CONFIG_SERIAL_MEN_Z135=m # end of Serial drivers @@ -4280,6 +4305,7 @@ CONFIG_XILLYBUS_PCIE=m # end of Character devices # CONFIG_RANDOM_TRUST_CPU is not set +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set # # I2C support @@ -4612,6 +4638,7 @@ CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m CONFIG_W1_MASTER_DS1WM=m CONFIG_W1_MASTER_GPIO=m +CONFIG_W1_MASTER_SGI=m # end of 1-wire Bus Masters # @@ -4630,6 +4657,7 @@ CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set CONFIG_W1_SLAVE_DS2438=m +CONFIG_W1_SLAVE_DS250X=m CONFIG_W1_SLAVE_DS2780=m CONFIG_W1_SLAVE_DS2781=m CONFIG_W1_SLAVE_DS28E04=m @@ -4727,6 +4755,7 @@ CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_AS370=m CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_K10TEMP=m @@ -4814,6 +4843,7 @@ CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m CONFIG_SENSORS_IBM_CFFPS=m +CONFIG_SENSORS_INSPUR_IPSPS=m CONFIG_SENSORS_IR35221=m CONFIG_SENSORS_IR38064=m CONFIG_SENSORS_IRPS5401=m @@ -4851,7 +4881,6 @@ CONFIG_SENSORS_SCH5636=m CONFIG_SENSORS_STTS751=m CONFIG_SENSORS_SMM665=m CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m @@ -5061,8 +5090,7 @@ CONFIG_MFD_BCM590XX=m CONFIG_MFD_BD9571MWV=m CONFIG_MFD_AXP20X=m CONFIG_MFD_AXP20X_I2C=m -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_CHARDEV=m +CONFIG_MFD_CROS_EC_DEV=m CONFIG_MFD_MADERA=m CONFIG_MFD_MADERA_I2C=m CONFIG_MFD_MADERA_SPI=m @@ -5092,6 +5120,7 @@ CONFIG_INTEL_SOC_PMIC=y CONFIG_INTEL_SOC_PMIC_BXTWC=m CONFIG_INTEL_SOC_PMIC_CHTWC=y CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m +CONFIG_INTEL_SOC_PMIC_MRFLD=m CONFIG_MFD_INTEL_LPSS=m CONFIG_MFD_INTEL_LPSS_ACPI=m CONFIG_MFD_INTEL_LPSS_PCI=m @@ -5316,6 +5345,7 @@ CONFIG_MEDIA_CONTROLLER_DVB=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_I2C=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m @@ -5784,6 +5814,7 @@ CONFIG_VIDEO_OV2685=m CONFIG_VIDEO_OV5647=m CONFIG_VIDEO_OV6650=m CONFIG_VIDEO_OV5670=m +CONFIG_VIDEO_OV5675=m CONFIG_VIDEO_OV5695=m CONFIG_VIDEO_OV7251=m CONFIG_VIDEO_OV772X=m @@ -6101,6 +6132,7 @@ CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=m +CONFIG_DRM_MIPI_DBI=m CONFIG_DRM_MIPI_DSI=y # CONFIG_DRM_DP_AUX_CHARDEV is not set # CONFIG_DRM_DEBUG_SELFTEST is not set @@ -6113,6 +6145,8 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE=y # CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=m CONFIG_DRM_VRAM_HELPER=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y CONFIG_DRM_GEM_SHMEM_HELPER=y CONFIG_DRM_SCHED=m @@ -6135,6 +6169,7 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_AMDGPU=m # CONFIG_DRM_AMDGPU_SI is not set # CONFIG_DRM_AMDGPU_CIK is not set +CONFIG_DRM_AMDGPU_USERPTR=y # CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set # @@ -6149,6 +6184,7 @@ CONFIG_DRM_AMDGPU=m CONFIG_DRM_AMD_DC=y CONFIG_DRM_AMD_DC_DCN1_0=y CONFIG_DRM_AMD_DC_DCN2_0=y +CONFIG_DRM_AMD_DC_DCN2_1=y CONFIG_DRM_AMD_DC_DSC_SUPPORT=y # CONFIG_DEBUG_KERNEL_DC is not set # end of Display Engine Configuration @@ -6221,8 +6257,14 @@ CONFIG_DRM_ANALOGIX_ANX78XX=m # end of Display Interface Bridges # CONFIG_DRM_ETNAVIV is not set -CONFIG_DRM_HISI_HIBMC=m -# CONFIG_DRM_TINYDRM is not set +CONFIG_DRM_GM12U320=m +CONFIG_TINYDRM_HX8357D=m +CONFIG_TINYDRM_ILI9225=m +CONFIG_TINYDRM_ILI9341=m +CONFIG_TINYDRM_MI0283QT=m +CONFIG_TINYDRM_REPAPER=m +CONFIG_TINYDRM_ST7586=m +CONFIG_TINYDRM_ST7735R=m CONFIG_DRM_XEN=y CONFIG_DRM_XEN_FRONTEND=m CONFIG_DRM_VBOXVIDEO=m @@ -6596,6 +6638,7 @@ CONFIG_SND_YMFPCI=m # CONFIG_SND_HDA=m CONFIG_SND_HDA_INTEL=m +# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y @@ -6623,6 +6666,7 @@ CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_I915=y CONFIG_SND_HDA_EXT_CORE=m CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_INTEL_NHLT=m CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m @@ -6729,6 +6773,7 @@ CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m @@ -6901,6 +6946,7 @@ CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_TS3A227E=m CONFIG_SND_SOC_TSCS42XX=m CONFIG_SND_SOC_TSCS454=m +CONFIG_SND_SOC_UDA1334=m CONFIG_SND_SOC_WM8510=m CONFIG_SND_SOC_WM8523=m CONFIG_SND_SOC_WM8524=m @@ -6976,6 +7022,7 @@ CONFIG_HID_MACALLY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CMEDIA=m CONFIG_HID_CP2112=m +CONFIG_HID_CREATIVE_SB0540=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y @@ -7092,6 +7139,9 @@ CONFIG_I2C_HID=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y +CONFIG_USB_LED_TRIG=y +CONFIG_USB_ULPI_BUS=m +CONFIG_USB_CONN_GPIO=m CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y @@ -7108,9 +7158,6 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_LEDS_TRIGGER_USBPORT=m CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers @@ -7139,8 +7186,6 @@ CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_HCD_ISO=y CONFIG_USB_SL811_CS=m CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m CONFIG_USB_HCD_BCMA=m CONFIG_USB_HCD_SSB=m # CONFIG_USB_HCD_TEST_MODE is not set @@ -7190,6 +7235,10 @@ CONFIG_USBIP_VHCI_NR_HCS=1 CONFIG_USBIP_HOST=m CONFIG_USBIP_VUDC=m # CONFIG_USBIP_DEBUG is not set +CONFIG_USB_CDNS3=m +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set +CONFIG_USB_CDNS3_PCI_WRAP=m CONFIG_USB_MUSB_HDRC=m # CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_GADGET is not set @@ -7302,7 +7351,6 @@ CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m @@ -7472,12 +7520,6 @@ CONFIG_TYPEC_NVIDIA_ALTMODE=m CONFIG_USB_ROLE_SWITCH=m CONFIG_USB_ROLES_INTEL_XHCI=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m CONFIG_MMC=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 @@ -7489,6 +7531,7 @@ CONFIG_SDIO_UART=m # # CONFIG_MMC_DEBUG is not set CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m @@ -7717,7 +7760,6 @@ CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BD70528=m CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_TPS6586X=m @@ -7845,6 +7887,7 @@ CONFIG_ASYNC_TX_DMA=y CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set # end of DMABUF options CONFIG_AUXDISPLAY=y @@ -7939,6 +7982,7 @@ CONFIG_XEN_HAVE_VPMU=y CONFIG_XEN_FRONT_PGDIR_SHBUF=m # end of Xen driver support +# CONFIG_GREYBUS is not set CONFIG_STAGING=y CONFIG_PRISM2_USB=m CONFIG_COMEDI=m @@ -8180,7 +8224,6 @@ CONFIG_SPEAKUP_SYNTH_DUMMY=m # end of Speakup console speech CONFIG_STAGING_MEDIA=y -CONFIG_I2C_BCM2048=m # CONFIG_VIDEO_IPU3_IMGU is not set # @@ -8198,40 +8241,6 @@ CONFIG_FWTTY_MAX_TOTAL_PORTS=64 CONFIG_FWTTY_MAX_CARD_PORTS=32 CONFIG_GS_FPGABOOT=m # CONFIG_UNISYSSPAR is not set -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_FB_FLEX=m -CONFIG_FB_TFT_FBTFT_DEVICE=m CONFIG_WILC1000=m CONFIG_WILC1000_SDIO=m CONFIG_WILC1000_SPI=m @@ -8244,7 +8253,6 @@ CONFIG_MOST_VIDEO=m CONFIG_MOST_I2C=m CONFIG_MOST_USB=m CONFIG_KS7010=m -# CONFIG_GREYBUS is not set # CONFIG_PI433 is not set # @@ -8252,15 +8260,6 @@ CONFIG_KS7010=m # # end of Gasket devices -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set CONFIG_FIELDBUS_DEV=m # CONFIG_KPC2000 is not set @@ -8286,6 +8285,24 @@ CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y # end of ISDN CAPI drivers +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_EXFAT_FS=m +CONFIG_EXFAT_DONT_MOUNT_VFAT=y +CONFIG_EXFAT_DISCARD=y +# CONFIG_EXFAT_DELAYED_SYNC is not set +# CONFIG_EXFAT_KERNEL_DEBUG is not set +# CONFIG_EXFAT_DEBUG_MSG is not set +CONFIG_EXFAT_DEFAULT_CODEPAGE=437 +CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" +CONFIG_QLGE=m CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m CONFIG_ACER_WIRELESS=m @@ -8372,20 +8389,24 @@ CONFIG_INTEL_PUNIT_IPC=m # CONFIG_MLX_PLATFORM is not set # CONFIG_TOUCHSCREEN_DMI is not set CONFIG_INTEL_CHTDC_TI_PWRBTN=m +CONFIG_INTEL_MRFLD_PWRBTN=m CONFIG_I2C_MULTI_INSTANTIATE=m CONFIG_INTEL_ATOMISP2_PM=m # CONFIG_HUAWEI_WMI is not set CONFIG_PCENGINES_APU2=m CONFIG_PMC_ATOM=y +CONFIG_MFD_CROS_EC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m CONFIG_CHROMEOS_PSTORE=m CONFIG_CHROMEOS_TBMC=m +CONFIG_CROS_EC=m CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_SPI=m CONFIG_CROS_EC_LPC=m CONFIG_CROS_EC_PROTO=y CONFIG_CROS_KBD_LED_BACKLIGHT=m +CONFIG_CROS_EC_CHARDEV=m CONFIG_CROS_EC_LIGHTBAR=m CONFIG_CROS_EC_DEBUGFS=m CONFIG_CROS_EC_SYSFS=m @@ -8451,7 +8472,7 @@ CONFIG_HYPERV_IOMMU=y # # Remoteproc drivers # -CONFIG_REMOTEPROC=m +# CONFIG_REMOTEPROC is not set # end of Remoteproc drivers # @@ -8536,6 +8557,7 @@ CONFIG_EXTCON_FSA9480=m CONFIG_EXTCON_GPIO=m CONFIG_EXTCON_INTEL_INT3496=m CONFIG_EXTCON_INTEL_CHT_WC=m +CONFIG_EXTCON_INTEL_MRFLD=m CONFIG_EXTCON_MAX14577=m CONFIG_EXTCON_MAX3355=m CONFIG_EXTCON_MAX77693=m @@ -8837,6 +8859,7 @@ CONFIG_SI7020=m # Inertial measurement units # CONFIG_ADIS16400=m +CONFIG_ADIS16460=m CONFIG_ADIS16480=m CONFIG_BMI160=m CONFIG_BMI160_I2C=m @@ -8848,6 +8871,7 @@ CONFIG_INV_MPU6050_SPI=m CONFIG_IIO_ST_LSM6DSX=m CONFIG_IIO_ST_LSM6DSX_I2C=m CONFIG_IIO_ST_LSM6DSX_SPI=m +CONFIG_IIO_ST_LSM6DSX_I3C=m # end of Inertial measurement units CONFIG_IIO_ADIS_LIB=m @@ -8881,6 +8905,7 @@ CONFIG_LTR501=m CONFIG_LV0104CS=m CONFIG_MAX44000=m CONFIG_MAX44009=m +CONFIG_NOA1305=m CONFIG_OPT3001=m CONFIG_PA12203001=m CONFIG_SI1133=m @@ -8951,6 +8976,7 @@ CONFIG_IIO_SYSFS_TRIGGER=m # CONFIG_AD5272=m CONFIG_DS1803=m +CONFIG_MAX5432=m CONFIG_MAX5481=m CONFIG_MAX5487=m CONFIG_MCP4018=m @@ -9246,6 +9272,9 @@ CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set +CONFIG_FS_VERITY=y +# CONFIG_FS_VERITY_DEBUG is not set +# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y @@ -9263,6 +9292,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=y CONFIG_CUSE=m +CONFIG_VIRTIO_FS=m CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set # CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set @@ -9416,6 +9446,12 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +CONFIG_EROFS_FS=m +# CONFIG_EROFS_FS_DEBUG is not set +CONFIG_EROFS_FS_XATTR=y +CONFIG_EROFS_FS_POSIX_ACL=y +CONFIG_EROFS_FS_SECURITY=y +# CONFIG_EROFS_FS_ZIP is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m @@ -9444,7 +9480,6 @@ CONFIG_NFSD_V4=y # CONFIG_NFSD_SCSILAYOUT is not set # CONFIG_NFSD_FLEXFILELAYOUT is not set CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y @@ -9591,6 +9626,7 @@ CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y # CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y # CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -9612,6 +9648,7 @@ CONFIG_IMA_APPRAISE=y # CONFIG_IMA_ARCH_POLICY is not set # CONFIG_IMA_APPRAISE_BUILD_POLICY is not set CONFIG_IMA_APPRAISE_BOOTPARAM=y +# CONFIG_IMA_APPRAISE_MODSIG is not set CONFIG_IMA_TRUSTED_KEYRING=y CONFIG_IMA_BLACKLIST_KEYRING=y # CONFIG_IMA_LOAD_X509 is not set @@ -9708,10 +9745,6 @@ CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS1280=m CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_ECHAINIV=m @@ -9730,6 +9763,7 @@ CONFIG_CRYPTO_XTS=m CONFIG_CRYPTO_KEYWRAP=m CONFIG_CRYPTO_NHPOLY1305=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_ESSIV=m # # Hash modes @@ -9758,6 +9792,7 @@ CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m @@ -9769,9 +9804,9 @@ CONFIG_CRYPTO_WP512=m # # Ciphers # +CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_AES_NI_INTEL=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_LIB_ARC4=m @@ -9782,6 +9817,7 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_LIB_DES=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m @@ -9835,6 +9871,7 @@ CONFIG_CRYPTO_DEV_CCP=y CONFIG_CRYPTO_DEV_CCP_DD=m CONFIG_CRYPTO_DEV_SP_CCP=y CONFIG_CRYPTO_DEV_CCP_CRYPTO=m +# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set CONFIG_CRYPTO_DEV_QAT=m CONFIG_CRYPTO_DEV_QAT_DH895xCC=m CONFIG_CRYPTO_DEV_QAT_C3XXX=m @@ -9846,6 +9883,7 @@ CONFIG_CRYPTO_DEV_CHELSIO=m # CONFIG_CHELSIO_IPSEC_INLINE is not set # CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set CONFIG_CRYPTO_DEV_VIRTIO=m +CONFIG_CRYPTO_DEV_SAFEXCEL=m CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m @@ -9949,7 +9987,6 @@ CONFIG_HAS_DMA=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y CONFIG_DMA_VIRT_OPS=y CONFIG_SWIOTLB=y # CONFIG_DMA_CMA is not set @@ -10008,7 +10045,6 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set -CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_INSTALL is not set CONFIG_OPTIMIZE_INLINING=y diff --git a/gnu/packages/aux-files/linux-libre/5.3-x86_64.conf b/gnu/packages/aux-files/linux-libre/5.4-x86_64.conf index d15a0d1ded..3dc7e8be03 100644 --- a/gnu/packages/aux-files/linux-libre/5.3-x86_64.conf +++ b/gnu/packages/aux-files/linux-libre/5.4-x86_64.conf @@ -1,6 +1,6 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 5.3.1-gnu Kernel Configuration +# Linux/x86 5.4.5 Kernel Configuration # # @@ -331,6 +331,7 @@ CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_PVH=y CONFIG_KVM_GUEST=y +CONFIG_ARCH_CPUIDLE_HALTPOLL=y CONFIG_PVH=y CONFIG_KVM_DEBUG_FS=y # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set @@ -402,7 +403,6 @@ CONFIG_X86_CPUID=m # CONFIG_X86_5LEVEL is not set CONFIG_X86_DIRECT_GBPAGES=y # CONFIG_X86_CPA_STATISTICS is not set -CONFIG_ARCH_HAS_MEM_ENCRYPT=y # CONFIG_AMD_MEM_ENCRYPT is not set CONFIG_NUMA=y CONFIG_AMD_NUMA=y @@ -432,6 +432,9 @@ CONFIG_X86_SMAP=y CONFIG_X86_INTEL_UMIP=y CONFIG_X86_INTEL_MPX=y CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y +CONFIG_X86_INTEL_TSX_MODE_OFF=y +# CONFIG_X86_INTEL_TSX_MODE_ON is not set +# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set CONFIG_EFI=y CONFIG_EFI_STUB=y CONFIG_EFI_MIXED=y @@ -445,7 +448,7 @@ CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y CONFIG_ARCH_HAS_KEXEC_PURGATORY=y -CONFIG_KEXEC_VERIFY_SIG=y +# CONFIG_KEXEC_SIG is not set CONFIG_CRASH_DUMP=y CONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 @@ -611,6 +614,8 @@ CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y CONFIG_CPU_IDLE_GOV_TEO=y +CONFIG_CPU_IDLE_GOV_HALTPOLL=y +CONFIG_HALTPOLL_CPUIDLE=m # end of CPU Idle CONFIG_INTEL_IDLE=y @@ -671,6 +676,7 @@ CONFIG_EFI_BOOTLOADER_CONTROL=m # CONFIG_EFI_TEST is not set CONFIG_APPLE_PROPERTIES=y CONFIG_RESET_ATTACK_MITIGATION=y +# CONFIG_EFI_RCI2_TABLE is not set # end of EFI (Extensible Firmware Interface) Support CONFIG_UEFI_CPER=y @@ -744,6 +750,7 @@ CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_HAS_SET_DIRECT_MAP=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y +CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y @@ -810,6 +817,7 @@ CONFIG_REFCOUNT_FULL=y CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y CONFIG_ARCH_USE_MEMREMAP_PROT=y # CONFIG_LOCK_EVENT_COUNTS is not set +CONFIG_ARCH_HAS_MEM_ENCRYPT=y # # GCOV-based kernel profiling @@ -838,11 +846,15 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y +CONFIG_ASM_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +CONFIG_UNUSED_SYMBOLS=y CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y +CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y @@ -853,6 +865,7 @@ CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLK_CMDLINE_PARSER=y CONFIG_BLK_WBT=y # CONFIG_BLK_CGROUP_IOLATENCY is not set +CONFIG_BLK_CGROUP_IOCOST=y CONFIG_BLK_WBT_MQ=y CONFIG_BLK_DEBUG_FS=y CONFIG_BLK_DEBUG_FS_ZONED=y @@ -990,13 +1003,14 @@ CONFIG_IDLE_PAGE_TRACKING=y CONFIG_ARCH_HAS_PTE_DEVMAP=y CONFIG_ZONE_DEVICE=y CONFIG_DEV_PAGEMAP_OPS=y -# CONFIG_HMM_MIRROR is not set +CONFIG_HMM_MIRROR=y # CONFIG_DEVICE_PRIVATE is not set CONFIG_FRAME_VECTOR=y CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y CONFIG_ARCH_HAS_PKEYS=y # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_BENCHMARK is not set +# CONFIG_READ_ONLY_THP_FOR_FS is not set CONFIG_ARCH_HAS_PTE_SPECIAL=y # end of Memory Management options @@ -1540,9 +1554,7 @@ CONFIG_NET_DSA_TAG_GSWIP=m CONFIG_NET_DSA_TAG_DSA=m CONFIG_NET_DSA_TAG_EDSA=m CONFIG_NET_DSA_TAG_MTK=m -CONFIG_NET_DSA_TAG_KSZ_COMMON=m CONFIG_NET_DSA_TAG_KSZ=m -CONFIG_NET_DSA_TAG_KSZ9477=m CONFIG_NET_DSA_TAG_QCA=m CONFIG_NET_DSA_TAG_LAN9303=m CONFIG_NET_DSA_TAG_SJA1105=m @@ -1671,6 +1683,7 @@ CONFIG_NET_ACT_CT=m CONFIG_NET_IFE_SKBMARK=m CONFIG_NET_IFE_SKBPRIO=m CONFIG_NET_IFE_SKBTCINDEX=m +# CONFIG_NET_TC_SKB_EXT is not set CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=y @@ -1750,6 +1763,7 @@ CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m CONFIG_CAN_GW=m +CONFIG_CAN_J1939=m # # CAN Device Drivers @@ -1760,6 +1774,7 @@ CONFIG_CAN_SLCAN=m CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_JANZ_ICAN3=m +CONFIG_CAN_KVASER_PCIEFD=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_CAN_C_CAN_PCI=m @@ -1768,17 +1783,20 @@ CONFIG_CAN_CC770_ISA=m CONFIG_CAN_CC770_PLATFORM=m CONFIG_CAN_IFI_CANFD=m CONFIG_CAN_M_CAN=m +CONFIG_CAN_M_CAN_PLATFORM=m +CONFIG_CAN_M_CAN_TCAN4X5X=m CONFIG_CAN_PEAK_PCIEFD=m CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_EMS_PCMCIA=m CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCMCIA=m +CONFIG_CAN_EMS_PCMCIA=m +CONFIG_CAN_F81601=m +CONFIG_CAN_KVASER_PCI=m CONFIG_CAN_PEAK_PCI=m CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PEAK_PCMCIA=m CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SJA1000_ISA=m +CONFIG_CAN_SJA1000_PLATFORM=m CONFIG_CAN_SOFTING=m CONFIG_CAN_SOFTING_CS=m @@ -2032,6 +2050,7 @@ CONFIG_HOTPLUG_PCI_SHPC=y # end of Cadence PCIe controllers support # CONFIG_VMD is not set +CONFIG_PCI_HYPERV_INTERFACE=m # # DesignWare PCI Core Support @@ -2130,6 +2149,7 @@ CONFIG_REGMAP_W1=m CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_REGMAP_SCCB=m +CONFIG_REGMAP_I3C=m CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # end of Generic Driver Options @@ -2148,12 +2168,12 @@ CONFIG_GNSS_SIRF_SERIAL=m CONFIG_GNSS_UBX_SERIAL=m CONFIG_MTD=m # CONFIG_MTD_TESTS is not set -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AR7_PARTS=m # # Partition parsers # +CONFIG_MTD_AR7_PARTS=m +CONFIG_MTD_CMDLINE_PARTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -2229,7 +2249,6 @@ CONFIG_MTD_PMC551=m CONFIG_MTD_DATAFLASH=m # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set CONFIG_MTD_DATAFLASH_OTP=y -CONFIG_MTD_M25P80=m CONFIG_MTD_MCHP23K256=m CONFIG_MTD_SST25L=m CONFIG_MTD_SLRAM=m @@ -2264,6 +2283,7 @@ CONFIG_MTD_RAW_NAND=m CONFIG_MTD_NAND_DENALI=m CONFIG_MTD_NAND_DENALI_PCI=m CONFIG_MTD_NAND_CAFE=m +CONFIG_MTD_NAND_MXIC=m CONFIG_MTD_NAND_GPIO=m CONFIG_MTD_NAND_PLATFORM=m @@ -2405,7 +2425,6 @@ CONFIG_AD525X_DPOT_SPI=m CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m -CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m @@ -2799,6 +2818,7 @@ CONFIG_DM_CACHE=m CONFIG_DM_CACHE_SMQ=m CONFIG_DM_WRITECACHE=m CONFIG_DM_ERA=m +CONFIG_DM_CLONE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -2812,6 +2832,7 @@ CONFIG_DM_DUST=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m +CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m CONFIG_DM_LOG_WRITES=m @@ -2955,12 +2976,16 @@ CONFIG_NET_DSA_MT7530=m CONFIG_NET_DSA_MV88E6060=m CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m CONFIG_NET_DSA_MICROCHIP_KSZ9477=m +CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m +CONFIG_NET_DSA_MICROCHIP_KSZ8795=m +CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI=m CONFIG_NET_DSA_MV88E6XXX=m CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y # CONFIG_NET_DSA_MV88E6XXX_PTP is not set CONFIG_NET_DSA_SJA1105=m CONFIG_NET_DSA_SJA1105_PTP=y +# CONFIG_NET_DSA_SJA1105_TAS is not set CONFIG_NET_DSA_QCA8K=m CONFIG_NET_DSA_REALTEK_SMI=m CONFIG_NET_DSA_SMSC_LAN9303=m @@ -3132,6 +3157,7 @@ CONFIG_MLX5_MPFS=y CONFIG_MLX5_ESWITCH=y CONFIG_MLX5_CORE_EN_DCB=y # CONFIG_MLX5_CORE_IPOIB is not set +CONFIG_MLX5_SW_STEERING=y CONFIG_MLXSW_CORE=m CONFIG_MLXSW_CORE_HWMON=y CONFIG_MLXSW_CORE_THERMAL=y @@ -3184,13 +3210,14 @@ CONFIG_ETHOC=m CONFIG_NET_VENDOR_PACKET_ENGINES=y CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m +CONFIG_NET_VENDOR_PENSANDO=y +CONFIG_IONIC=m CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_QED=m CONFIG_QED_LL2=y @@ -3298,6 +3325,7 @@ CONFIG_SWPHY=y # MII PHY device drivers # CONFIG_SFP=m +CONFIG_ADIN_PHY=m CONFIG_AMD_PHY=m CONFIG_AQUANTIA_PHY=m CONFIG_AX88796B_PHY=m @@ -3424,6 +3452,7 @@ CONFIG_ATH9K_WOW=y CONFIG_ATH9K_RFKILL=y CONFIG_ATH9K_CHANNEL_CONTEXT=y CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_PCI_NO_EEPROM=m CONFIG_ATH9K_HTC=m CONFIG_ATH9K_HTC_DEBUGFS=y CONFIG_ATH9K_HWRNG=y @@ -3531,7 +3560,6 @@ CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y # CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_PCIE_RTPM is not set # # Debugging Options @@ -3695,9 +3723,6 @@ CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_PC300TOO=m CONFIG_FARSYNC=m -CONFIG_DSCC4=m -CONFIG_DSCC4_PCISYNC=y -CONFIG_DSCC4_PCI_RST=y CONFIG_DLCI=m CONFIG_DLCI_MAX=8 CONFIG_LAPBETHER=m @@ -3869,6 +3894,7 @@ CONFIG_JOYSTICK_WALKERA0701=m CONFIG_JOYSTICK_PSXPAD_SPI=m # CONFIG_JOYSTICK_PSXPAD_SPI_FF is not set CONFIG_JOYSTICK_PXRC=m +CONFIG_JOYSTICK_FSIA6B=m CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m @@ -4132,11 +4158,11 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=m CONFIG_SERIAL_8250_RT288X=y CONFIG_SERIAL_8250_LPSS=m CONFIG_SERIAL_8250_MID=m -CONFIG_SERIAL_8250_MOXA=m # # Non-8250 serial port support @@ -4166,6 +4192,7 @@ CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 CONFIG_SERIAL_FSL_LPUART=m +CONFIG_SERIAL_FSL_LINFLEXUART=m CONFIG_SERIAL_MEN_Z135=m # end of Serial drivers @@ -4242,6 +4269,7 @@ CONFIG_XILLYBUS_PCIE=m # end of Character devices # CONFIG_RANDOM_TRUST_CPU is not set +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set # # I2C support @@ -4563,6 +4591,7 @@ CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m CONFIG_W1_MASTER_DS1WM=m CONFIG_W1_MASTER_GPIO=m +CONFIG_W1_MASTER_SGI=m # end of 1-wire Bus Masters # @@ -4581,6 +4610,7 @@ CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m # CONFIG_W1_SLAVE_DS2433_CRC is not set CONFIG_W1_SLAVE_DS2438=m +CONFIG_W1_SLAVE_DS250X=m CONFIG_W1_SLAVE_DS2780=m CONFIG_W1_SLAVE_DS2781=m CONFIG_W1_SLAVE_DS28E04=m @@ -4678,6 +4708,7 @@ CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_AS370=m CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_K10TEMP=m @@ -4765,6 +4796,7 @@ CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m CONFIG_SENSORS_IBM_CFFPS=m +CONFIG_SENSORS_INSPUR_IPSPS=m CONFIG_SENSORS_IR35221=m CONFIG_SENSORS_IR38064=m CONFIG_SENSORS_IRPS5401=m @@ -4802,7 +4834,6 @@ CONFIG_SENSORS_SCH5636=m CONFIG_SENSORS_STTS751=m CONFIG_SENSORS_SMM665=m CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m CONFIG_SENSORS_ADS7871=m CONFIG_SENSORS_AMC6821=m @@ -5000,8 +5031,7 @@ CONFIG_MFD_BCM590XX=m CONFIG_MFD_BD9571MWV=m CONFIG_MFD_AXP20X=m CONFIG_MFD_AXP20X_I2C=m -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_CHARDEV=m +CONFIG_MFD_CROS_EC_DEV=m CONFIG_MFD_MADERA=m CONFIG_MFD_MADERA_I2C=m CONFIG_MFD_MADERA_SPI=m @@ -5253,6 +5283,7 @@ CONFIG_MEDIA_CONTROLLER_DVB=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_I2C=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m @@ -5705,6 +5736,7 @@ CONFIG_VIDEO_OV2685=m CONFIG_VIDEO_OV5647=m CONFIG_VIDEO_OV6650=m CONFIG_VIDEO_OV5670=m +CONFIG_VIDEO_OV5675=m CONFIG_VIDEO_OV5695=m CONFIG_VIDEO_OV7251=m CONFIG_VIDEO_OV772X=m @@ -6016,6 +6048,7 @@ CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=m +CONFIG_DRM_MIPI_DBI=m CONFIG_DRM_MIPI_DSI=y # CONFIG_DRM_DP_AUX_CHARDEV is not set # CONFIG_DRM_DEBUG_SELFTEST is not set @@ -6028,6 +6061,8 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE=y # CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=m CONFIG_DRM_VRAM_HELPER=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y CONFIG_DRM_GEM_SHMEM_HELPER=y CONFIG_DRM_SCHED=m @@ -6050,6 +6085,7 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_AMDGPU=m # CONFIG_DRM_AMDGPU_SI is not set # CONFIG_DRM_AMDGPU_CIK is not set +CONFIG_DRM_AMDGPU_USERPTR=y # CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set # @@ -6064,6 +6100,7 @@ CONFIG_DRM_AMDGPU=m CONFIG_DRM_AMD_DC=y CONFIG_DRM_AMD_DC_DCN1_0=y CONFIG_DRM_AMD_DC_DCN2_0=y +CONFIG_DRM_AMD_DC_DCN2_1=y CONFIG_DRM_AMD_DC_DSC_SUPPORT=y # CONFIG_DEBUG_KERNEL_DC is not set # end of Display Engine Configuration @@ -6137,8 +6174,14 @@ CONFIG_DRM_ANALOGIX_ANX78XX=m # end of Display Interface Bridges # CONFIG_DRM_ETNAVIV is not set -CONFIG_DRM_HISI_HIBMC=m -# CONFIG_DRM_TINYDRM is not set +CONFIG_DRM_GM12U320=m +CONFIG_TINYDRM_HX8357D=m +CONFIG_TINYDRM_ILI9225=m +CONFIG_TINYDRM_ILI9341=m +CONFIG_TINYDRM_MI0283QT=m +CONFIG_TINYDRM_REPAPER=m +CONFIG_TINYDRM_ST7586=m +CONFIG_TINYDRM_ST7735R=m CONFIG_DRM_XEN=y CONFIG_DRM_XEN_FRONTEND=m CONFIG_DRM_VBOXVIDEO=m @@ -6447,6 +6490,7 @@ CONFIG_SND_YMFPCI=m # CONFIG_SND_HDA=m CONFIG_SND_HDA_INTEL=m +# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y @@ -6474,6 +6518,7 @@ CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_I915=y CONFIG_SND_HDA_EXT_CORE=m CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_INTEL_NHLT=m CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m @@ -6580,6 +6625,7 @@ CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m @@ -6590,6 +6636,7 @@ CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m +CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m CONFIG_SND_SOC_MTK_BTCVSD=m CONFIG_SND_SOC_SOF_TOPLEVEL=y CONFIG_SND_SOC_SOF_PCI=m @@ -6626,9 +6673,14 @@ CONFIG_SND_SOC_SOF_COMETLAKE_LP=m CONFIG_SND_SOC_SOF_COMETLAKE_LP_SUPPORT=y CONFIG_SND_SOC_SOF_COMETLAKE_H=m CONFIG_SND_SOC_SOF_COMETLAKE_H_SUPPORT=y +CONFIG_SND_SOC_SOF_TIGERLAKE_SUPPORT=y +CONFIG_SND_SOC_SOF_TIGERLAKE=m +CONFIG_SND_SOC_SOF_ELKHARTLAKE_SUPPORT=y +CONFIG_SND_SOC_SOF_ELKHARTLAKE=m CONFIG_SND_SOC_SOF_HDA_COMMON=m CONFIG_SND_SOC_SOF_HDA_LINK=y CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y +# CONFIG_SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1 is not set CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m CONFIG_SND_SOC_SOF_HDA=m CONFIG_SND_SOC_SOF_XTENSA=m @@ -6785,6 +6837,7 @@ CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_SND_SOC_TS3A227E=m CONFIG_SND_SOC_TSCS42XX=m CONFIG_SND_SOC_TSCS454=m +CONFIG_SND_SOC_UDA1334=m CONFIG_SND_SOC_WM8510=m CONFIG_SND_SOC_WM8523=m CONFIG_SND_SOC_WM8524=m @@ -6859,6 +6912,7 @@ CONFIG_HID_MACALLY=m CONFIG_HID_PRODIKEYS=m CONFIG_HID_CMEDIA=m CONFIG_HID_CP2112=m +CONFIG_HID_CREATIVE_SB0540=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y @@ -6982,6 +7036,9 @@ CONFIG_INTEL_ISH_HID=m CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y +CONFIG_USB_LED_TRIG=y +CONFIG_USB_ULPI_BUS=m +CONFIG_USB_CONN_GPIO=m CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y @@ -6998,9 +7055,6 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_LEDS_TRIGGER_USBPORT=m CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=m -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers @@ -7029,8 +7083,6 @@ CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_HCD_ISO=y CONFIG_USB_SL811_CS=m CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m CONFIG_USB_HCD_BCMA=m CONFIG_USB_HCD_SSB=m # CONFIG_USB_HCD_TEST_MODE is not set @@ -7080,6 +7132,10 @@ CONFIG_USBIP_VHCI_NR_HCS=1 CONFIG_USBIP_HOST=m CONFIG_USBIP_VUDC=m # CONFIG_USBIP_DEBUG is not set +CONFIG_USB_CDNS3=m +# CONFIG_USB_CDNS3_GADGET is not set +# CONFIG_USB_CDNS3_HOST is not set +CONFIG_USB_CDNS3_PCI_WRAP=m CONFIG_USB_MUSB_HDRC=m # CONFIG_USB_MUSB_HOST is not set # CONFIG_USB_MUSB_GADGET is not set @@ -7192,7 +7248,6 @@ CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m CONFIG_USB_CYPRESS_CY7C63=m @@ -7362,12 +7417,6 @@ CONFIG_TYPEC_NVIDIA_ALTMODE=m CONFIG_USB_ROLE_SWITCH=m CONFIG_USB_ROLES_INTEL_XHCI=m -CONFIG_USB_LED_TRIG=y -CONFIG_USB_ULPI_BUS=m -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m CONFIG_MMC=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 @@ -7379,6 +7428,7 @@ CONFIG_SDIO_UART=m # # CONFIG_MMC_DEBUG is not set CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m @@ -7613,7 +7663,6 @@ CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BD70528=m CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_PALMAS=m CONFIG_RTC_DRV_TPS6586X=m @@ -7740,6 +7789,7 @@ CONFIG_DMA_ENGINE_RAID=y CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set # CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set # end of DMABUF options CONFIG_DCA=m @@ -7800,7 +7850,6 @@ CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y # CONFIG_HYPERV=m CONFIG_HYPERV_TIMER=y -CONFIG_HYPERV_TSCPAGE=y CONFIG_HYPERV_UTILS=m CONFIG_HYPERV_BALLOON=m # end of Microsoft Hyper-V guest support @@ -7838,6 +7887,7 @@ CONFIG_XEN_HAVE_VPMU=y CONFIG_XEN_FRONT_PGDIR_SHBUF=m # end of Xen driver support +# CONFIG_GREYBUS is not set CONFIG_STAGING=y CONFIG_PRISM2_USB=m CONFIG_COMEDI=m @@ -8074,7 +8124,6 @@ CONFIG_SPEAKUP_SYNTH_DUMMY=m # end of Speakup console speech CONFIG_STAGING_MEDIA=y -CONFIG_I2C_BCM2048=m CONFIG_VIDEO_IPU3_IMGU=m # @@ -8095,40 +8144,6 @@ CONFIG_UNISYSSPAR=y CONFIG_UNISYS_VISORNIC=m CONFIG_UNISYS_VISORINPUT=m CONFIG_UNISYS_VISORHBA=m -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_FB_FLEX=m -CONFIG_FB_TFT_FBTFT_DEVICE=m CONFIG_WILC1000=m CONFIG_WILC1000_SDIO=m CONFIG_WILC1000_SPI=m @@ -8141,7 +8156,6 @@ CONFIG_MOST_VIDEO=m CONFIG_MOST_I2C=m CONFIG_MOST_USB=m CONFIG_KS7010=m -# CONFIG_GREYBUS is not set # CONFIG_PI433 is not set # @@ -8151,15 +8165,6 @@ CONFIG_STAGING_GASKET_FRAMEWORK=m CONFIG_STAGING_APEX_DRIVER=m # end of Gasket devices -CONFIG_EROFS_FS=m -# CONFIG_EROFS_FS_DEBUG is not set -CONFIG_EROFS_FS_XATTR=y -CONFIG_EROFS_FS_POSIX_ACL=y -CONFIG_EROFS_FS_SECURITY=y -# CONFIG_EROFS_FS_USE_VM_MAP_RAM is not set -# CONFIG_EROFS_FAULT_INJECTION is not set -CONFIG_EROFS_FS_IO_MAX_RETRIES=5 -# CONFIG_EROFS_FS_ZIP is not set CONFIG_FIELDBUS_DEV=m # CONFIG_KPC2000 is not set @@ -8183,6 +8188,24 @@ CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y # end of ISDN CAPI drivers +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_EXFAT_FS=m +CONFIG_EXFAT_DONT_MOUNT_VFAT=y +CONFIG_EXFAT_DISCARD=y +# CONFIG_EXFAT_DELAYED_SYNC is not set +# CONFIG_EXFAT_KERNEL_DEBUG is not set +# CONFIG_EXFAT_DEBUG_MSG is not set +CONFIG_EXFAT_DEFAULT_CODEPAGE=437 +CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" +CONFIG_QLGE=m CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m CONFIG_ACER_WIRELESS=m @@ -8278,16 +8301,19 @@ CONFIG_INTEL_SPEED_SELECT_INTERFACE=m # end of Intel Speed Select Technology interface support CONFIG_PMC_ATOM=y +CONFIG_MFD_CROS_EC=m CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m CONFIG_CHROMEOS_PSTORE=m CONFIG_CHROMEOS_TBMC=m +CONFIG_CROS_EC=m CONFIG_CROS_EC_I2C=m CONFIG_CROS_EC_ISHTP=m CONFIG_CROS_EC_SPI=m CONFIG_CROS_EC_LPC=m CONFIG_CROS_EC_PROTO=y CONFIG_CROS_KBD_LED_BACKLIGHT=m +CONFIG_CROS_EC_CHARDEV=m CONFIG_CROS_EC_LIGHTBAR=m CONFIG_CROS_EC_DEBUGFS=m CONFIG_CROS_EC_SYSFS=m @@ -8354,7 +8380,7 @@ CONFIG_HYPERV_IOMMU=y # # Remoteproc drivers # -CONFIG_REMOTEPROC=m +# CONFIG_REMOTEPROC is not set # end of Remoteproc drivers # @@ -8740,6 +8766,7 @@ CONFIG_SI7020=m # Inertial measurement units # CONFIG_ADIS16400=m +CONFIG_ADIS16460=m CONFIG_ADIS16480=m CONFIG_BMI160=m CONFIG_BMI160_I2C=m @@ -8751,6 +8778,7 @@ CONFIG_INV_MPU6050_SPI=m CONFIG_IIO_ST_LSM6DSX=m CONFIG_IIO_ST_LSM6DSX_I2C=m CONFIG_IIO_ST_LSM6DSX_SPI=m +CONFIG_IIO_ST_LSM6DSX_I3C=m # end of Inertial measurement units CONFIG_IIO_ADIS_LIB=m @@ -8784,6 +8812,7 @@ CONFIG_LTR501=m CONFIG_LV0104CS=m CONFIG_MAX44000=m CONFIG_MAX44009=m +CONFIG_NOA1305=m CONFIG_OPT3001=m CONFIG_PA12203001=m CONFIG_SI1133=m @@ -8854,6 +8883,7 @@ CONFIG_IIO_SYSFS_TRIGGER=m # CONFIG_AD5272=m CONFIG_DS1803=m +CONFIG_MAX5432=m CONFIG_MAX5481=m CONFIG_MAX5487=m CONFIG_MCP4018=m @@ -9159,6 +9189,9 @@ CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set +CONFIG_FS_VERITY=y +# CONFIG_FS_VERITY_DEBUG is not set +# CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y @@ -9177,6 +9210,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=y CONFIG_CUSE=m +CONFIG_VIRTIO_FS=m CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set # CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set @@ -9331,6 +9365,12 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +CONFIG_EROFS_FS=m +# CONFIG_EROFS_FS_DEBUG is not set +CONFIG_EROFS_FS_XATTR=y +CONFIG_EROFS_FS_POSIX_ACL=y +CONFIG_EROFS_FS_SECURITY=y +# CONFIG_EROFS_FS_ZIP is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m @@ -9359,7 +9399,6 @@ CONFIG_NFSD_V4=y # CONFIG_NFSD_SCSILAYOUT is not set # CONFIG_NFSD_FLEXFILELAYOUT is not set CONFIG_NFSD_V4_SECURITY_LABEL=y -# CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y @@ -9507,6 +9546,7 @@ CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y # CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y # CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -9529,6 +9569,7 @@ CONFIG_IMA_APPRAISE=y # CONFIG_IMA_ARCH_POLICY is not set # CONFIG_IMA_APPRAISE_BUILD_POLICY is not set CONFIG_IMA_APPRAISE_BOOTPARAM=y +# CONFIG_IMA_APPRAISE_MODSIG is not set CONFIG_IMA_TRUSTED_KEYRING=y CONFIG_IMA_BLACKLIST_KEYRING=y # CONFIG_IMA_LOAD_X509 is not set @@ -9625,18 +9666,7 @@ CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m -CONFIG_CRYPTO_AEGIS128L=m -CONFIG_CRYPTO_AEGIS256=m CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m -CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2=m -CONFIG_CRYPTO_AEGIS256_AESNI_SSE2=m -CONFIG_CRYPTO_MORUS640=m -CONFIG_CRYPTO_MORUS640_GLUE=m -CONFIG_CRYPTO_MORUS640_SSE2=m -CONFIG_CRYPTO_MORUS1280=m -CONFIG_CRYPTO_MORUS1280_GLUE=m -CONFIG_CRYPTO_MORUS1280_SSE2=m -CONFIG_CRYPTO_MORUS1280_AVX2=m CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_ECHAINIV=m @@ -9657,6 +9687,7 @@ CONFIG_CRYPTO_NHPOLY1305=m CONFIG_CRYPTO_NHPOLY1305_SSE2=m CONFIG_CRYPTO_NHPOLY1305_AVX2=m CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_ESSIV=m # # Hash modes @@ -9690,6 +9721,7 @@ CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1_SSSE3=m CONFIG_CRYPTO_SHA256_SSSE3=m CONFIG_CRYPTO_SHA512_SSSE3=m +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_SHA3=m @@ -9702,9 +9734,9 @@ CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers # +CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_AES_X86_64=m CONFIG_CRYPTO_AES_NI_INTEL=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_LIB_ARC4=m @@ -9721,6 +9753,7 @@ CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST5_AVX_X86_64=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_CAST6_AVX_X86_64=m +CONFIG_CRYPTO_LIB_DES=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_DES3_EDE_X86_64=m CONFIG_CRYPTO_FCRYPT=m @@ -9780,6 +9813,7 @@ CONFIG_CRYPTO_DEV_CCP_DD=m CONFIG_CRYPTO_DEV_SP_CCP=y CONFIG_CRYPTO_DEV_CCP_CRYPTO=m CONFIG_CRYPTO_DEV_SP_PSP=y +# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set CONFIG_CRYPTO_DEV_QAT=m CONFIG_CRYPTO_DEV_QAT_DH895xCC=m CONFIG_CRYPTO_DEV_QAT_C3XXX=m @@ -9793,6 +9827,7 @@ CONFIG_CRYPTO_DEV_CHELSIO=m # CONFIG_CHELSIO_IPSEC_INLINE is not set # CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set CONFIG_CRYPTO_DEV_VIRTIO=m +CONFIG_CRYPTO_DEV_SAFEXCEL=m CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m @@ -9896,7 +9931,6 @@ CONFIG_HAS_DMA=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_DMA_DECLARE_COHERENT=y CONFIG_DMA_VIRT_OPS=y CONFIG_SWIOTLB=y # CONFIG_DMA_CMA is not set @@ -9958,7 +9992,6 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set -CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_INSTALL is not set CONFIG_OPTIMIZE_INLINING=y diff --git a/gnu/packages/axoloti.scm b/gnu/packages/axoloti.scm index a3ca6b6844..94d3d818c5 100644 --- a/gnu/packages/axoloti.scm +++ b/gnu/packages/axoloti.scm @@ -32,6 +32,7 @@ #:use-module (gnu packages embedded) #:use-module (gnu packages flashing-tools) #:use-module (gnu packages java) + #:use-module (gnu packages java-graphics) #:use-module (gnu packages libusb) #:use-module (gnu packages pkg-config) #:use-module (gnu packages textutils) @@ -65,7 +66,7 @@ (define-public axoloti-runtime (package (name "axoloti-runtime") - (version "1.0.12") + (version "1.0.12-2") (source (origin (method git-fetch) @@ -74,7 +75,7 @@ (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "05hyr9qx9dplp0gkx4v34i17972b3f512qndnarzy4wzfpnp0s3b")) + (base32 "1qffis277wshldr3i939b0r2x3a2mlr53samxqmr2nk1sfm2b4w9")) (modules '((guix build utils))) (snippet '(begin @@ -357,3 +358,273 @@ runtime.") for sketching digital audio algorithms. The patches run on a standalone powerful microcontroller board: Axoloti Core. This package provides the patcher application."))) + +(define-public axoloti-patcher-next + (package + (name "axoloti-patcher-next") + (version "2.0.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/axoloti/axoloti.git") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "022p993wf9l9mp6vg94x592vfqd1k1sjrq5f6x45h5r16qy6bdzh")) + (modules '((guix build utils))) + (snippet + '(begin + ;; Remove pre-built Java binaries. + (delete-file-recursively "lib/") + #t)))) + (build-system gnu-build-system) + (arguments + `(#:tests? #f ; there's a Java test which is run as part of the Java build. + #:modules ((guix build gnu-build-system) + ((guix build ant-build-system) #:prefix ant:) + (guix build utils) + (srfi srfi-1) + (srfi srfi-26) + (ice-9 match) + (ice-9 regex) + (sxml simple) + (sxml xpath) + (sxml transform)) + #:imported-modules ((guix build ant-build-system) + (guix build syscalls) + ,@%gnu-build-system-modules) + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'make-git-checkout-writable + (lambda* (#:key inputs #:allow-other-keys) + (copy-recursively (assoc-ref inputs "elfloader") + "firmware/elfloader") + (for-each make-file-writable (find-files ".")) + #t)) + (add-after 'unpack 'patch-paths + (lambda* (#:key inputs #:allow-other-keys) + ;; prepare ChibiOS + (invoke "7z" "x" (assoc-ref inputs "chibios")) + (with-directory-excursion "ChibiOS_19.1.3/ext" + (invoke "7z" "x" "fatfs-0.13_patched.7z")) + + ;; Hardcode full path to compiler tools + (substitute* + '("ChibiOS_19.1.3/os/common/startup/ARMCMx/compilers/GCC/mk/arm-none-eabi.mk" + "env/arm-none-eabi.mk") + (("TRGT =.*") + (string-append "TRGT = " + (assoc-ref inputs "cross-toolchain") + "/bin/arm-none-eabi-\n"))) + + ;; Hardcode path to "make" + (substitute* "src/main/java/axoloti/shell/ShellTask.java" + (("return \"make\"") + (string-append "return \"" (which "make") "\""))) + + ;; Hardcode path to "dfu-util" + (substitute* "src/main/java/axoloti/shell/UploadFirmwareDFU.java" + (("Axoloti.getReleaseDir\\(\\) \\+ \"/platform_.+/bin/dfu-util\"") + (string-append "\"" (which "dfu-util") "\""))) + #t)) + (delete 'configure) + (replace 'build + ;; Build Axoloti firmware with cross-compiler + (lambda* (#:key inputs #:allow-other-keys) + (let* ((toolchain (assoc-ref inputs "cross-toolchain")) + (headers (string-append + toolchain + "/arm-none-eabi/include:" + toolchain + "/arm-none-eabi/include/arm-none-eabi/armv7e-m"))) + (setenv "CROSS_CPATH" headers) + (setenv "CROSS_CPLUS_INCLUDE_PATH" headers) + (setenv "CROSS_LIBRARY_PATH" + (string-append toolchain + "/arm-none-eabi/lib"))) + (with-directory-excursion "platform_linux" + (invoke "sh" "compile_firmware.sh")))) + (add-after 'build 'build-patcher + (lambda* (#:key inputs outputs #:allow-other-keys) + (setenv "JAVA_HOME" (assoc-ref inputs "jdk")) + ;; We want to use our own jar files instead of the pre-built + ;; stuff in lib. So we replace the zipfileset tags in the + ;; build.xml with new ones that reference our jars. + (let* ((build.xml (with-input-from-file "build.xml" + (lambda _ + (xml->sxml #:trim-whitespace? #t)))) + (jars (append-map (match-lambda + (((? (cut string-prefix? "java-" <>) + label) . directory) + (find-files directory "\\.jar$")) + (_ '())) + inputs)) + (classpath (string-join jars ":")) + (fileset (map (lambda (jar) + `(zipfileset (@ (excludes "META-INF/*.SF") + (src ,jar)))) + jars))) + (call-with-output-file "build.xml" + (lambda (port) + (sxml->xml + (pre-post-order + build.xml + `( ;; Remove all zipfileset tags from the "jar" tree and + ;; inject our own tags. + (jar . ,(lambda (tag . kids) + `(jar ,@(append-map + (filter (lambda (e) + (not (eq? 'zipfileset (car e))))) + kids) + ,@fileset))) + ;; Skip the "bundle" target (and the "-post-jar" target + ;; that depends on it), because we don't need it and it + ;; confuses sxml->xml. + (target . ,(lambda (tag . kids) + (let ((name ((sxpath '(name *text*)) + (car kids)))) + (if (or (member "bundle" name) + (member "-post-jar" name)) + '() ; skip + `(,tag ,@kids))))) + (*default* . ,(lambda (tag . kids) `(,tag ,@kids))) + (*text* . ,(lambda (_ txt) + (match txt + ;; Remove timestamp. + ("${TODAY}" "(unknown)") + (_ txt)))))) + port))) + + ;; Build it! + (invoke "ant" + (string-append "-Djavac.classpath=" classpath) + "-Dbuilt_by=guix" + "-Dbuild.time=01/01/1970 00:00:00" + "-Djavac.source=1.8" + "-Djavac.target=1.8" + (string-append "-Dshort.version=" + ,version) + ;; TODO: this is the output of: + ;; git describe --long --tags --dirty --always + (string-append "-Dbuild.version=" + ,version "-0-g88b60feb"))))) + (replace 'install + (lambda* (#:key inputs outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (share (string-append out "/share/axoloti/"))) + + ;; TODO: don't copy *everything* from these directories. + (for-each (lambda (dir) + (copy-recursively dir (string-append share "/" dir))) + '("api" + "archive" + "doc" + "env" + "firmware" + "nbproject" + "platform_linux")) + (install-file "dist/Axoloti.jar" share) + + ;; Install old firmware + (let ((target (string-append share "/old_firmware/")) + (old-firmware + (string-append (assoc-ref inputs "axoloti-runtime") + "/share/axoloti/firmware/"))) + (mkdir-p target) + (install-file (string-append old-firmware + "flasher/flasher_build/flasher.bin") + target) + ;; TODO: the old file differs from the file that is included + ;; in this repository as the old firmware. + (install-file (string-append old-firmware + "build/axoloti.bin") + target)) + + ;; We do this to ensure that this package retains references to + ;; other Java packages' jar files. + (install-file "build.xml" share) + + ;; Create a launcher script + (mkdir (string-append out "/bin")) + (let ((target (string-append out "/bin/Axoloti"))) + (with-output-to-file target + (lambda () + (let* ((dir (string-append (assoc-ref outputs "out") + "/share/axoloti")) + (toolchain (assoc-ref inputs "cross-toolchain")) + (includes (string-append + toolchain + "/arm-none-eabi/include:" + toolchain + "/arm-none-eabi/include/arm-none-eabi/armv7e-m"))) + (display + (string-append "#!" (which "sh") "\n" + "export CROSS_CPATH=" includes "\n" + "export CROSS_CPLUS_INCLUDE_PATH=" includes "\n" + "export CROSS_LIBRARY_PATH=" + toolchain "/arm-none-eabi/lib" "\n" + (which "java") + + ;; Renderer arguments + " -Xbootclasspath/a:" + (assoc-ref inputs "java-marlin-renderer") + "/lib/marlin.jar" + " -Dsun.java2d.renderer=org.marlin.pisces.MarlinRenderingEngine" + " -Daxoloti_release=" share + " -jar " dir "/Axoloti.jar"))))) + (chmod target #o555)) + #t))) + (add-after 'install 'strip-jar-timestamps + (assoc-ref ant:%standard-phases 'strip-jar-timestamps))))) + (inputs + `(("jdk" ,icedtea "jdk") + ("cross-toolchain" ,arm-none-eabi-nano-toolchain-7-2018-q2-update) + ;; for compiling patches + ("make" ,gnu-make) + ;; for uploading compiled patches and firmware + ("dfu-util" ,dfu-util-for-axoloti) + ;; for org/apache/commons/lang3/tuple/ImmutablePair + ("java-commons-lang3" ,java-commons-lang3) + ("java-jgit" ,java-jgit-4.2) + ("java-jsch" ,java-jsch) + ("java-marlin-renderer" ,java-marlin-renderer) + ("java-piccolo2d-core" ,java-piccolo2d-core) + ("java-piccolo2d-extras" ,java-piccolo2d-extras) + ("java-rsyntaxtextarea" ,java-rsyntaxtextarea) + ("java-simple-xml" ,java-simple-xml) + ("java-slf4j-api" ,java-slf4j-api) + ("java-usb4java" ,java-usb4java))) + (native-inputs + `(("ant" ,ant) + ("axoloti-runtime" ,axoloti-runtime) ; for old firmware + ("java-junit" ,java-junit) + ("java-hamcrest-core" ,java-hamcrest-core) + ("p7zip" ,p7zip) + ("zip" ,zip) ; for repacking the jar + ("elfloader" + ,(let ((commit "d0f93acac6577a069b8739bf42c9500e9a862988")) + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/JohannesTaelman/elfloader.git") + (commit commit))) + (file-name (git-file-name "elfloader" commit)) + (sha256 + (base32 + "0zsy6w784amfq4vr1qnx8xvy70v33gvffz1vljllwppdc8s3khmn"))))) + ("chibios" + ,(origin + (method url-fetch) + (uri "http://rwthaachen.dl.osdn.jp/chibios/70739/ChibiOS_19.1.3.7z") + (sha256 + (base32 + "1090alqp1z1bhj1z8ls04a350kbs8hsjcpkfddbprds73zbnnpk9")))))) + (home-page "http://www.axoloti.com/") + (synopsis "Audio development environment for the Axoloti core board") + (description + "The Axoloti patcher offers a “patcher” environment similar to Pure Data +for sketching digital audio algorithms. The patches run on a standalone +powerful microcontroller board: Axoloti Core.") + (license (list license:gpl3+ ; the whole project and GUI + license:bsd-3)))) ; the elfloader diff --git a/gnu/packages/bash.scm b/gnu/packages/bash.scm index 84406d02ff..88005f4618 100644 --- a/gnu/packages/bash.scm +++ b/gnu/packages/bash.scm @@ -1,5 +1,5 @@ ;;; GNU Guix --- Functional package management for GNU -;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017 Ludovic Courtès <ludo@gnu.org> +;;; Copyright © 2012, 2013, 2014, 2015, 2016, 2017, 2019 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2014, 2015, 2018 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2015, 2017 Leo Famulari <leo@famulari.name> ;;; Copyright © 2016, 2017, 2018, 2019 Efraim Flashner <efraim@flashner.co.il> @@ -84,7 +84,7 @@ number/base32-hash tuples, directly usable in the 'patch-series' form." (sig (download-to-store store (string-append (patch-url number) ".sig")))) - (unless (gnupg-verify* sig patch) + (unless (eq? 'valid-signature (gnupg-verify* sig patch)) (error "failed to verify signature" patch)) (list number diff --git a/gnu/packages/benchmark.scm b/gnu/packages/benchmark.scm index 8e347879dd..08478d3118 100644 --- a/gnu/packages/benchmark.scm +++ b/gnu/packages/benchmark.scm @@ -5,6 +5,7 @@ ;;; Copyright © 2018, 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2019 Eric Bavier <bavier@member.fsf.org> ;;; Copyright © 2019 Gábor Boskovits <boskovits@gmail.com> +;;; Copyright © 2019 Ludovic Courtès <ludo@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -43,14 +44,14 @@ (define-public fio (package (name "fio") - (version "3.14") + (version "3.17") (source (origin (method url-fetch) - (uri (string-append "http://brick.kernel.dk/snaps/" + (uri (string-append "https://brick.kernel.dk/snaps/" "fio-" version ".tar.bz2")) (sha256 (base32 - "047y53nyhnmnxcrsfbsf0gcpxw7bli3n19ycscpxy9974j0fck0v")))) + "1hvh8syjz6l0q9bm5p7rf0yrmpkfcx5zj5d47mf6335w1i0h5gqf")))) (build-system gnu-build-system) (arguments '(#:test-target "test" @@ -118,18 +119,22 @@ is to write a job file matching the I/O load one wants to simulate.") license:public-domain)))) ;; Parameterized in anticipation of m(va)pich support -(define (imb mpi) +(define (intel-mpi-benchmarks mpi) (package - (name (string-append "imb-" (package-name mpi))) - (version "2019.1") - (source - (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/intel/mpi-benchmarks.git") - (commit (string-append "v" version)))) - (file-name (git-file-name name version)) - (sha256 (base32 "18hfdyvl5i172gadiq9si1qxif5rvic0lifxpbrr7s59ylg8f9c4")))) + (name (string-append "intel-mpi-benchmarks" + (if (string=? (package-name mpi) "openmpi") + "" + (string-append "-" (package-name mpi))))) + (version "2019.3") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/intel/mpi-benchmarks.git") + (commit (string-append "IMB-v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0si5xi6ilhd3w0gbsg124589pvp094hvf366rvjjb9pi7pdk5p4i")))) (build-system gnu-build-system) (inputs `(("mpi" ,mpi))) @@ -138,25 +143,25 @@ is to write a job file matching the I/O load one wants to simulate.") (modify-phases %standard-phases (delete 'configure) (delete 'check) - (replace 'build - (lambda* (#:key inputs #:allow-other-keys) - (let ((mpi-home (assoc-ref inputs "mpi"))) - ;; Override default parallelism - (substitute* "Makefile" - (("make -j[[:digit:]]+") - (format #f "make -j~d" (parallel-job-count)))) - (invoke "make" "SHELL=sh" "CC=mpicc" "CXX=mpic++")))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) + (define (benchmark? file stat) + (and (string-prefix? "IMB-" (basename file)) + (executable-file? file))) + (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) - (for-each - (lambda (file) - (install-file file bin)) - '("IMB-IO" "IMB-EXT" "IMB-MPI1" "IMB-NBC" "IMB-RMA" "IMB-MT"))) - #t))))) + (for-each (lambda (file) + (install-file file bin)) + (find-files "." benchmark?)) + #t)))) + + ;; The makefile doesn't express all the dependencies, it seems. + #:parallel-build? #t + + #:make-flags '("CC=mpicc" "CXX=mpicxx"))) (home-page "https://software.intel.com/en-us/articles/intel-mpi-benchmarks") - (synopsis "Intel MPI Benchmarks") + (synopsis "Benchmarks for the Message Passing Interface (MPI)") (description "This package provides benchmarks for implementations of the @dfn{Message Passing Interface} (MPI). It contains MPI performance measurements for @@ -172,7 +177,11 @@ Efficiency of the MPI implementation. @end itemize") (license license:cpl1.0))) -(define-public imb-openmpi (imb openmpi)) +(define-public intel-mpi-benchmarks/openmpi + (intel-mpi-benchmarks openmpi)) + +(define-public imb-openmpi + (deprecated-package "imb-openmpi" intel-mpi-benchmarks/openmpi)) (define-public multitime (package diff --git a/gnu/packages/bioconductor.scm b/gnu/packages/bioconductor.scm index e584a7bced..863b97463a 100644 --- a/gnu/packages/bioconductor.scm +++ b/gnu/packages/bioconductor.scm @@ -32,6 +32,7 @@ #:use-module (gnu packages compression) #:use-module (gnu packages gcc) #:use-module (gnu packages graph) + #:use-module (gnu packages graphviz) #:use-module (gnu packages haskell-xyz) #:use-module (gnu packages image) #:use-module (gnu packages maths) @@ -40,11 +41,34 @@ #:use-module (gnu packages pkg-config) #:use-module (gnu packages statistics) #:use-module (gnu packages web) + #:use-module (gnu packages xml) #:use-module (srfi srfi-1)) ;;; Annotations +(define-public r-reactome-db + (package + (name "r-reactome-db") + (version "1.70.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "reactome.db" version 'annotation)) + (sha256 + (base32 + "05wc4fp0faq6h3kq5rwafnips043as31yq11mrjngfxvf5i10srg")))) + (properties `((upstream-name . "reactome.db"))) + (build-system r-build-system) + (propagated-inputs + `(("r-annotationdbi" ,r-annotationdbi))) + (home-page "https://bioconductor.org/packages/reactome.db/") + (synopsis "Annotation maps for reactome") + (description + "This package provides a set of annotation maps for the REACTOME +database, assembled using data from REACTOME.") + (license license:cc-by4.0))) + (define-public r-bsgenome-celegans-ucsc-ce6 (package (name "r-bsgenome-celegans-ucsc-ce6") @@ -876,19 +900,72 @@ examples' of Affymetrix data, unlike the artificial examples included in the package @code{affy}.") (license license:gpl2+))) +(define-public r-curatedtcgadata + (package + (name "r-curatedtcgadata") + (version "1.8.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "curatedTCGAData" version 'experiment)) + (sha256 + (base32 + "02y6cgihmsl9b4a9mmcdjjgjp06lpz04biyvxd3n5lk5gnqd9r3y")))) + (properties + `((upstream-name . "curatedTCGAData"))) + (build-system r-build-system) + (propagated-inputs + `(("r-annotationhub" ,r-annotationhub) + ("r-experimenthub" ,r-experimenthub) + ("r-hdf5array" ,r-hdf5array) + ("r-multiassayexperiment" ,r-multiassayexperiment) + ("r-s4vectors" ,r-s4vectors) + ("r-summarizedexperiment" ,r-summarizedexperiment))) + (home-page "https://bioconductor.org/packages/curatedTCGAData/") + (synopsis "Curated data from The Cancer Genome Atlas") + (description + "This package provides publicly available data from The Cancer Genome +Atlas (TCGA) as @code{MultiAssayExperiment} objects. +@code{MultiAssayExperiment} integrates multiple assays (e.g., RNA-seq, copy +number, mutation, microRNA, protein, and others) with clinical / pathological +data. It also links assay barcodes with patient identifiers, enabling +harmonized subsetting of rows (features) and columns (patients / samples) +across the entire multi-'omics experiment.") + (license license:artistic2.0))) + ;;; Packages +(define-public r-biocversion + (package + (name "r-biocversion") + (version "3.10.1") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiocVersion" version)) + (sha256 + (base32 + "0mfqjqfvrwwglldq3g7nbic5hf3nwzv02nbfxnl2cfvf9gznlh5f")))) + (properties `((upstream-name . "BiocVersion"))) + (build-system r-build-system) + (home-page "https://bioconductor.org/packages/BiocVersion/") + (synopsis "Set the appropriate version of Bioconductor packages") + (description + "This package provides repository information for the appropriate version +of Bioconductor.") + (license license:artistic2.0))) + (define-public r-biocgenerics (package (name "r-biocgenerics") - (version "0.30.0") + (version "0.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "BiocGenerics" version)) (sha256 (base32 - "1n87686bg5nmpqdpzwv1h551dkbxp9wk6wbmzpkgm71qxnk2yv9f")))) + "1np8y442zyakm4axpinbw1qsgc6wd3zjsnirbhc8lcii4ky9j0rn")))) (properties `((upstream-name . "BiocGenerics"))) (build-system r-build-system) @@ -902,14 +979,14 @@ packages.") (define-public r-affycomp (package (name "r-affycomp") - (version "1.60.0") + (version "1.62.0") (source (origin (method url-fetch) (uri (bioconductor-uri "affycomp" version)) (sha256 (base32 - "1nijqljg5r3qj1y6an0i58sby76hqacj3a3nvainxic4n5wlzh0n")))) + "0cl7c3m2lz2w8g2k7z7wjd0dyj0dkssvms99qpg8a1v3hx1xs6js")))) (properties `((upstream-name . "affycomp"))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase))) @@ -923,14 +1000,14 @@ measures for Affymetrix Oligonucleotide Arrays.") (define-public r-affycompatible (package (name "r-affycompatible") - (version "1.44.0") + (version "1.46.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AffyCompatible" version)) (sha256 (base32 - "1zi96qa6vkgwvvy5cn6c3p1kbfsaz74zsw2kjxarz5qs744f0xvs")))) + "10ahrdlifp1i7rd58zb10w75y5bnigs7xp5gv4fhb5y7p7dvb0ks")))) (properties `((upstream-name . "AffyCompatible"))) (build-system r-build-system) @@ -951,14 +1028,14 @@ Command Console} (AGCC)-compatible sample annotation files.") (define-public r-affycontam (package (name "r-affycontam") - (version "1.42.0") + (version "1.44.0") (source (origin (method url-fetch) (uri (bioconductor-uri "affyContam" version)) (sha256 (base32 - "0nzk1cm26rhmym753wyhn35hqnz5lvavi3i5qfgdvhxgjy3m1jgp")))) + "0yd1prgv5zfkg22ski73mvg96qknwz8v6ji6s4qy8p4wrqyj7b7l")))) (properties `((upstream-name . "affyContam"))) (build-system r-build-system) (propagated-inputs @@ -976,14 +1053,14 @@ problems in CEL-level data to help evaluate performance of quality metrics.") (define-public r-affycoretools (package (name "r-affycoretools") - (version "1.56.0") + (version "1.58.3") (source (origin (method url-fetch) (uri (bioconductor-uri "affycoretools" version)) (sha256 (base32 - "17dxpzhwwdwnxkdpmyjwdnacg41hw60mlc71w4nzlvs28sfsy09s")))) + "12r9ljkp3xix0xq8d1488c8wb3a4whb805v48ynmv985bs3phc71")))) (properties `((upstream-name . "affycoretools"))) (build-system r-build-system) (propagated-inputs @@ -1015,14 +1092,14 @@ to streamline the more common analyses that a Biostatistician might see.") (define-public r-affxparser (package (name "r-affxparser") - (version "1.56.0") + (version "1.58.0") (source (origin (method url-fetch) (uri (bioconductor-uri "affxparser" version)) (sha256 (base32 - "1jv7k9pn4c7szi3ma2f2xsd58pkrkvjpk5wra73r6kc607qgrv33")))) + "03h4lxr48p84f6i7zb2rm10ma3k4d1nmvdw5yhxcmzqbmd12lk40")))) (properties `((upstream-name . "affxparser"))) (build-system r-build-system) (home-page "https://github.com/HenrikBengtsson/affxparser") @@ -1043,14 +1120,14 @@ structure.") (define-public r-annotate (package (name "r-annotate") - (version "1.62.0") + (version "1.64.0") (source (origin (method url-fetch) (uri (bioconductor-uri "annotate" version)) (sha256 (base32 - "0hww0h4b7bv37mnjviazy247mnzj72z5linwm1gvljrgqv3bagcs")))) + "0rcmdy6hs6m4d6wxgi52c0bhdsbf2sm9f155qbcb05sn0nh8pxwy")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -1070,14 +1147,14 @@ microarrays.") (define-public r-hpar (package (name "r-hpar") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "hpar" version)) (sha256 (base32 - "1mnld60nrn6qpb24sz2sy8vlw3wkhfc3z726gi67l8b5mdmkxgg5")))) + "1yhay1ryrgj9cqa1x136cw40ca93afyvg0sarm30jsbj8nc1rm5m")))) (build-system r-build-system) (home-page "https://bioconductor.org/packages/hpar/") (synopsis "Human Protein Atlas in R") @@ -1088,14 +1165,14 @@ the Human Protein Atlas project.") (define-public r-regioner (package (name "r-regioner") - (version "1.16.5") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "regioneR" version)) (sha256 (base32 - "12x7sh5d8y549hqz4qjb2j3ak22l79w9l0vdbv4gn0bwi5206k8h")))) + "0m073hrqp62zpd2blnqm5ka539hcilir05m8av14vdhzhjzp13ya")))) (properties `((upstream-name . "regioneR"))) (build-system r-build-system) (propagated-inputs @@ -1117,14 +1194,14 @@ region sets and other genomic features.") (define-public r-reportingtools (package (name "r-reportingtools") - (version "2.24.0") + (version "2.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ReportingTools" version)) (sha256 (base32 - "16ska7mlacka0xi8x2icy8v42vaxccb3a1x73szmfvcrwr592qsc")))) + "0wmi2219wydyzc07rz3azsrksa7wiacfh9pr5x2fsmj9f0w3n15w")))) (properties `((upstream-name . "ReportingTools"))) (build-system r-build-system) @@ -1165,14 +1242,14 @@ browser.") (define-public r-geneplotter (package (name "r-geneplotter") - (version "1.62.0") + (version "1.64.0") (source (origin (method url-fetch) (uri (bioconductor-uri "geneplotter" version)) (sha256 (base32 - "0jlqs20mqr0wgmjgzkzaynp3cy1z3xjzpz7055c1qi42fhimmimb")))) + "1k6780fn1kkghpm1prhhsyw621441a3bmnqfl9ns0zbc1zdq39nx")))) (build-system r-build-system) (propagated-inputs `(("r-annotate" ,r-annotate) @@ -1190,14 +1267,14 @@ browser.") (define-public r-oligoclasses (package (name "r-oligoclasses") - (version "1.46.0") + (version "1.48.0") (source (origin (method url-fetch) (uri (bioconductor-uri "oligoClasses" version)) (sha256 (base32 - "0z86zrmn80kcy6fgb9i9zs82vhim73n8hlkqy7y8sbb2jwksdr72")))) + "02m1m3dkiyywalphw3i5n6y3bs8zp24xh59v9cz6jgjpah811skf")))) (properties `((upstream-name . "oligoClasses"))) (build-system r-build-system) (propagated-inputs @@ -1225,14 +1302,14 @@ packages.") (define-public r-oligo (package (name "r-oligo") - (version "1.48.0") + (version "1.50.0") (source (origin (method url-fetch) (uri (bioconductor-uri "oligo" version)) (sha256 (base32 - "0qkyz65zvry0syibjkvkshwijccna18jy0hlib0n5x4c8x9zs5df")))) + "01icfyy82f9k0m7ngrppz1ckq3wpq7zp6kgf8ppc55j6582c5jh3")))) (properties `((upstream-name . "oligo"))) (build-system r-build-system) (inputs `(("zlib" ,zlib))) @@ -1259,14 +1336,14 @@ Affymetrix (CEL files) and NimbleGen arrays (XYS files).") (define-public r-qvalue (package (name "r-qvalue") - (version "2.16.0") + (version "2.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "qvalue" version)) (sha256 (base32 - "00mahhwb4n2s6nycwkdkjs2qgyyyi7hyrby3qr269krprr6q3lh5")))) + "0njnidyncm3g3712mnp77cs4kghn596ss1pz6fhp1cr0wxcayp6j")))) (build-system r-build-system) (propagated-inputs `(("r-ggplot2" ,r-ggplot2) @@ -1288,14 +1365,14 @@ problems in genomics, brain imaging, astrophysics, and data mining.") (define-public r-diffbind (package (name "r-diffbind") - (version "2.12.0") + (version "2.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DiffBind" version)) (sha256 (base32 - "1ialb1j2xa21a8dzss76qky83rg8y6jwdwi0mhy8b088zvxavich")))) + "1729wyi2l4480yrkp5wg3ryirrmlk0j3njqs1qyckq3c8bjk12h2")))) (properties `((upstream-name . "DiffBind"))) (build-system r-build-system) (inputs @@ -1333,14 +1410,14 @@ occupancy (overlap) analysis and plotting functions.") (define-public r-ripseeker (package (name "r-ripseeker") - (version "1.24.0") + (version "1.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "RIPSeeker" version)) (sha256 (base32 - "0rfff4wal51iji0m74mgnrlcq6i41nq5b79mv5brv7mab3g0cv43")))) + "1wyv9mfrbxzklysfjcnwb8yils71janyyxa982jn0zxx4p9cl3vs")))) (properties `((upstream-name . "RIPSeeker"))) (build-system r-build-system) (propagated-inputs @@ -1366,14 +1443,14 @@ processing to visualization and annotation.") (define-public r-multtest (package (name "r-multtest") - (version "2.40.0") + (version "2.42.0") (source (origin (method url-fetch) (uri (bioconductor-uri "multtest" version)) (sha256 (base32 - "0vy9wk1111qm69xy4r4n01b9rw60dsrcj2169jd45yiq63cdq7bv")))) + "0qna9lx76ldsfy8qf5xmhl4ymqfkj29m1gdqhph06s470c8mwari")))) (build-system r-build-system) (propagated-inputs `(("r-survival" ,r-survival) @@ -1404,13 +1481,13 @@ expressed genes in DNA microarray experiments.") (define-public r-graph (package (name "r-graph") - (version "1.62.0") + (version "1.64.0") (source (origin (method url-fetch) (uri (bioconductor-uri "graph" version)) (sha256 (base32 - "0rs81a8kp7nfzsfy2d11mlrjf4z156075p52wvz9nvi3vc6l348w")))) + "1ivf59k7k552m7zd8g3wwazd71dq3xmgmhcq435738i02h0fqnyc")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics))) @@ -1451,14 +1528,14 @@ determining dependencies between variables, code improvement suggestions.") (define-public r-chippeakanno (package (name "r-chippeakanno") - (version "3.18.2") + (version "3.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ChIPpeakAnno" version)) (sha256 (base32 - "0wzwdxvvr7wknz5jnan0wsp81c1gv4d2qx0mrb1yybqf4z068779")))) + "0hp3s3shnrb55cxvx9wrdl67wqw9f55gdgx7262s4mahpxjswfsa")))) (properties `((upstream-name . "ChIPpeakAnno"))) (build-system r-build-system) (propagated-inputs @@ -1507,12 +1584,12 @@ enrichedGO (addGeneIDs).") (define-public r-marray (package (name "r-marray") - (version "1.62.0") + (version "1.64.0") (source (origin (method url-fetch) (uri (bioconductor-uri "marray" version)) (sha256 - (base32 "000745d7gxka8cx4jwxf0p128jk90dw6wi3y8dkrkyz2arkl29yz")))) + (base32 "1mbs9rk279hnm9yz34za3xz3hb88ll1d0abw4m2pgjgbh4kkhdrl")))) (build-system r-build-system) (propagated-inputs `(("r-limma" ,r-limma))) @@ -1526,12 +1603,12 @@ normalization and quality checking.") (define-public r-cghbase (package (name "r-cghbase") - (version "1.44.0") + (version "1.46.0") (source (origin (method url-fetch) (uri (bioconductor-uri "CGHbase" version)) (sha256 - (base32 "0z9lvn5dxym6kc8ak5fsqkipv2p4z49va3cyz1ch8rw477k2iwvm")))) + (base32 "0136pk6pfwpiiy9vca4pgg4wh74jfb5ssglpdszzhamljpvg765x")))) (properties `((upstream-name . "CGHbase"))) (build-system r-build-system) (propagated-inputs @@ -1546,12 +1623,12 @@ the @code{arrayCGH} packages.") (define-public r-cghcall (package (name "r-cghcall") - (version "2.46.0") + (version "2.48.0") (source (origin (method url-fetch) (uri (bioconductor-uri "CGHcall" version)) (sha256 - (base32 "13vzk4myizs94hyak4iyxdrqyxyq1g85hwsmd13892g8pww6ga93")))) + (base32 "1x8pz7zhw2nabik1vgdhlivndqvil3s7vnl5070k493v6gza0p3s")))) (properties `((upstream-name . "CGHcall"))) (build-system r-build-system) (propagated-inputs @@ -1569,20 +1646,21 @@ the @code{arrayCGH} packages.") (define-public r-qdnaseq (package (name "r-qdnaseq") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "QDNAseq" version)) (sha256 - (base32 "02afy5bpj35981q1qm59jx399hksk6a9v1jfwy7x888rn86gfcfz")))) + (base32 "0xcqdpv9a47zpxx0q9sif5y4s1yzx3pig0kywy961kh5xgl5bcrq")))) (properties `((upstream-name . "QDNAseq"))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) - ("r-biocparallel" ,r-biocparallel) ("r-cghbase" ,r-cghbase) ("r-cghcall" ,r-cghcall) ("r-dnacopy" ,r-dnacopy) + ("r-future" ,r-future) + ("r-future-apply" ,r-future-apply) ("r-genomicranges" ,r-genomicranges) ("r-iranges" ,r-iranges) ("r-matrixstats" ,r-matrixstats) @@ -1601,14 +1679,14 @@ respectively.") (define-public r-bayseq (package (name "r-bayseq") - (version "2.18.0") + (version "2.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "baySeq" version)) (sha256 (base32 - "13lm7n5zqw8yg5sqb92h6ppcnr0l32qdgmv7i16pn32fb6z41p0w")))) + "040s1d3756spyzblkyx2vcy7bn3vf87mhsp3is35yxkj55n3myjk")))) (properties `((upstream-name . "baySeq"))) (build-system r-build-system) (propagated-inputs @@ -1627,14 +1705,14 @@ more complex hypotheses) via empirical Bayesian methods.") (define-public r-chipcomp (package (name "r-chipcomp") - (version "1.14.0") + (version "1.16.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ChIPComp" version)) (sha256 (base32 - "0ragyl9dhg0ymgkh4z9d1cbwhbpcwh6x4985laaw6wmq2sjm732y")))) + "0wk0vvg6dk9wk60lzbadrnqar75dppvyr4hiwrhv9rhhah2mg2mg")))) (properties `((upstream-name . "ChIPComp"))) (build-system r-build-system) (propagated-inputs @@ -1661,14 +1739,14 @@ datasets.") (define-public r-riboprofiling (package (name "r-riboprofiling") - (version "1.14.0") + (version "1.16.0") (source (origin (method url-fetch) (uri (bioconductor-uri "RiboProfiling" version)) (sha256 (base32 - "1si8zkznm0slvghk786qsp0wd6sns6hggrnz88ww9fcfvsqvzsy9")))) + "0nfzyiq7cd6fs5agzl1zyfg8s631wi7kjngiyvd3vxlhi8wsjicx")))) (properties `((upstream-name . "RiboProfiling"))) (build-system r-build-system) (propagated-inputs @@ -1700,14 +1778,14 @@ assessment, principal component analysis on codon coverage.") (define-public r-riboseqr (package (name "r-riboseqr") - (version "1.18.0") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "riboSeqR" version)) (sha256 (base32 - "1d1v098w7fmnsmxfg3l7yndyyr7ajig00axiwg413lyg255is1ga")))) + "1jr7h64hyhyf9gf15lah6iqwyljfc8mraf9kya4lql6lcjjkjiqm")))) (properties `((upstream-name . "riboSeqR"))) (build-system r-build-system) (propagated-inputs @@ -1728,14 +1806,14 @@ parsing of genetic sequencing data from ribosome profiling experiments.") (define-public r-interactionset (package (name "r-interactionset") - (version "1.12.0") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "InteractionSet" version)) (sha256 (base32 - "0djgfpp34l6w8mk5b8s4wh0l12s4nn0f9ifvc3dq4970f6hb55z6")))) + "0n2l95h56x5g68p10cap8p4x3a6vaph2hjlk09vmi3j48lrzb2kh")))) (properties `((upstream-name . "InteractionSet"))) (build-system r-build-system) @@ -1760,14 +1838,14 @@ experiments.") (define-public r-genomicinteractions (package (name "r-genomicinteractions") - (version "1.18.1") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomicInteractions" version)) (sha256 (base32 - "0hq2n5yfr9h2ayn10dy9lz08gd2q0awrm5cy2kqdmz4d8ss4r94p")))) + "10kwb70c9aq0bfqpq48h186lsbwgrg18m14r9z8x6n8l7cds5azc")))) (properties `((upstream-name . "GenomicInteractions"))) (build-system r-build-system) @@ -1799,14 +1877,14 @@ information and producing various plots and statistics.") (define-public r-ctc (package (name "r-ctc") - (version "1.58.0") + (version "1.60.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ctc" version)) (sha256 (base32 - "15n5b6i18x14km5rdqiydxcak5cr5dr3adwwwc5kcqf5gkwmi3am")))) + "0wh27izkyr1j26nznisw654mb5c94xpwjjkx7r6bhwg9ihxxcl6d")))) (build-system r-build-system) (propagated-inputs `(("r-amap" ,r-amap))) (home-page "https://bioconductor.org/packages/ctc/") @@ -1819,14 +1897,14 @@ trees and clusters to other programs.") (define-public r-goseq (package (name "r-goseq") - (version "1.36.0") + (version "1.38.0") (source (origin (method url-fetch) (uri (bioconductor-uri "goseq" version)) (sha256 (base32 - "0h8kd3d7yfdq8padfb0k92crwxi5h9gvgv4l3pa8k8wn4kczvciw")))) + "11ypa41qv1nx3cncxlwlbhdxqlwq95rb9byv2z3crrf9nfp24byv")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -1845,14 +1923,14 @@ defined categories which are over/under represented in RNA-seq data.") (define-public r-glimma (package (name "r-glimma") - (version "1.12.0") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Glimma" version)) (sha256 (base32 - "11qg5khqspxldfgg6p3xsxys472ab8wwi2snwc6bdxczv1f2p56x")))) + "1rjrqgl96iz4b3xqpc174wgz7bqmc8gbm9ljag0y27kz29fwng8r")))) (properties `((upstream-name . "Glimma"))) (build-system r-build-system) (propagated-inputs @@ -1872,14 +1950,14 @@ information.") (define-public r-rots (package (name "r-rots") - (version "1.12.0") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ROTS" version)) (sha256 (base32 - "1j29pfyv2pn0wp544m5a568b3yd31kzavwwiwqylcjwvq5lfzy77")))) + "08mwlb0lpprys2b7vif8aj5bnprmn09mm79zz158gbhrv9j9d1qm")))) (properties `((upstream-name . "ROTS"))) (build-system r-build-system) (propagated-inputs @@ -1896,14 +1974,14 @@ in omics data.") (define-public r-plgem (package (name "r-plgem") - (version "1.56.0") + (version "1.58.0") (source (origin (method url-fetch) (uri (bioconductor-uri "plgem" version)) (sha256 (base32 - "0y6gp5rlkvlv435qps7zhih84g5wrdvg6myj74ywnpl5a773nfqp")))) + "0fkyvcw2qxp4g527s9rzia45yapi0r6gbij7svisil8rbgfdp45v")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) @@ -1921,14 +1999,14 @@ genes or proteins in these datasets.") (define-public r-inspect (package (name "r-inspect") - (version "1.14.0") + (version "1.16.1") (source (origin (method url-fetch) (uri (bioconductor-uri "INSPEcT" version)) (sha256 (base32 - "1a7smljndiyahgpj6vl079pvi3n0rfk1vkdkp799y4nm2wnhn93r")))) + "03cf9c94ra4f847ndlf8sn2cq1kl1055514wjq0lqbvlbfdj1dq3")))) (properties `((upstream-name . "INSPEcT"))) (build-system r-build-system) (propagated-inputs @@ -1937,12 +2015,14 @@ genes or proteins in these datasets.") ("r-biocparallel" ,r-biocparallel) ("r-deseq2" ,r-deseq2) ("r-desolve" ,r-desolve) + ("r-gdata" ,r-gdata) + ("r-genomeinfodb" ,r-genomeinfodb) ("r-genomicalignments" ,r-genomicalignments) ("r-genomicfeatures" ,r-genomicfeatures) ("r-genomicranges" ,r-genomicranges) ("r-iranges" ,r-iranges) + ("r-kernsmooth" ,r-kernsmooth) ("r-plgem" ,r-plgem) - ("r-preprocesscore" ,r-preprocesscore) ("r-proc" ,r-proc) ("r-rootsolve" ,r-rootsolve) ("r-rsamtools" ,r-rsamtools) @@ -1963,14 +2043,14 @@ modeling the rates that determines changes in mature mRNA levels.") (define-public r-dnabarcodes (package (name "r-dnabarcodes") - (version "1.14.0") + (version "1.16.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DNABarcodes" version)) (sha256 (base32 - "1a0c9ag9n41cs0da9lfvpkxf7n5vbrfypaygdv66mw73aibix6v0")))) + "0r2r9qc2qvf7rfl1h5ynvv3xd7n444zbc697s85qxqdpr4sxqmfd")))) (properties `((upstream-name . "DNABarcodes"))) (build-system r-build-system) (propagated-inputs @@ -1990,14 +2070,14 @@ demultiplexed, i.e. assigned to their original reference barcode.") (define-public r-ruvseq (package (name "r-ruvseq") - (version "1.18.0") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "RUVSeq" version)) (sha256 (base32 - "0ln4qc9d5r15zlhazx6annx97c0wrx3jqpcvk7yj1jnwh349lw33")))) + "1ipbbzpngx988lsmwqv7vbmqm65m43xvsmipayfppkrr6jipzxrj")))) (properties `((upstream-name . "RUVSeq"))) (build-system r-build-system) (propagated-inputs @@ -2016,19 +2096,19 @@ samples.") (define-public r-biocneighbors (package (name "r-biocneighbors") - (version "1.2.0") + (version "1.4.1") (source (origin (method url-fetch) (uri (bioconductor-uri "BiocNeighbors" version)) (sha256 (base32 - "08ak72y6mafzkhzfkx6b7waljpa0f1nxcrvyspd88sgzxgxjnkmg")))) + "05vi1cij37s8wgj92k3l6a3f3dwldj8jvijdp4695zczka6kypdf")))) (properties `((upstream-name . "BiocNeighbors"))) (build-system r-build-system) (propagated-inputs - `(("r-biocgenerics" ,r-biocgenerics) - ("r-biocparallel" ,r-biocparallel) + `(("r-biocparallel" ,r-biocparallel) + ("r-matrix" ,r-matrix) ("r-rcpp" ,r-rcpp) ("r-rcppannoy" ,r-rcppannoy) ("r-rcpphnsw" ,r-rcpphnsw) @@ -2047,14 +2127,14 @@ achieved for all methods using the BiocParallel framework.") (define-public r-biocsingular (package (name "r-biocsingular") - (version "1.0.0") + (version "1.2.1") (source (origin (method url-fetch) (uri (bioconductor-uri "BiocSingular" version)) (sha256 (base32 - "129z6bkdhm5wlvrjiwrr8yl2jj9chh4i6dm6firlj4c4ql3jp4f5")))) + "0fjfmmpda7pszsck2hm7bp4509pl3xaz02q2q03d5vla62h1h81k")))) (properties `((upstream-name . "BiocSingular"))) (build-system r-build-system) (propagated-inputs @@ -2079,29 +2159,37 @@ possible, parallelization is achieved using the BiocParallel framework.") (define-public r-destiny (package (name "r-destiny") - (version "2.14.0") + (version "3.0.0") (source (origin (method url-fetch) (uri (bioconductor-uri "destiny" version)) (sha256 (base32 - "1bpa114fgrknn6415g4d1jrvb924nkwi18jzfqribpvcf1vlgrf3")))) + "0vj9nk8g6i4vzm6cnzvbsqcvyk6fhmx0a0nxxrciarffyhqk81yz")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) ("r-biocgenerics" ,r-biocgenerics) + ("r-ggplot-multistats" ,r-ggplot-multistats) ("r-ggplot2" ,r-ggplot2) ("r-ggthemes" ,r-ggthemes) - ("r-igraph" ,r-igraph) + ("r-irlba" ,r-irlba) + ("r-knn-covertree" ,r-knn-covertree) ("r-matrix" ,r-matrix) + ("r-pcamethods" ,r-pcamethods) ("r-proxy" ,r-proxy) ("r-rcpp" ,r-rcpp) ("r-rcppeigen" ,r-rcppeigen) + ("r-rcpphnsw" ,r-rcpphnsw) + ("r-rspectra" ,r-rspectra) ("r-scales" ,r-scales) ("r-scatterplot3d" ,r-scatterplot3d) + ("r-singlecellexperiment" ,r-singlecellexperiment) ("r-smoother" ,r-smoother) ("r-summarizedexperiment" ,r-summarizedexperiment) + ("r-tidyr" ,r-tidyr) + ("r-tidyselect" ,r-tidyselect) ("r-vim" ,r-vim))) (home-page "https://bioconductor.org/packages/destiny/") (synopsis "Create and plot diffusion maps") @@ -2113,14 +2201,14 @@ maps.") (define-public r-savr (package (name "r-savr") - (version "1.22.0") + (version "1.24.0") (source (origin (method url-fetch) (uri (bioconductor-uri "savR" version)) (sha256 (base32 - "101p0c07p49c50lfnbfanyyikdypmqkvwclqifq32js9phqwhf6h")))) + "1lsnqjl6qxbj0wai05qb2wrxrhxq5iarv2livmvwiwv70iigqygf")))) (properties `((upstream-name . "savR"))) (build-system r-build-system) (propagated-inputs @@ -2139,14 +2227,14 @@ Viewer (SAV) files, access data, and generate QC plots.") (define-public r-chipexoqual (package (name "r-chipexoqual") - (version "1.8.0") + (version "1.10.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ChIPexoQual" version)) (sha256 (base32 - "02341i3lg74czgapf5qc6zvi2321af3rp85qavbg209fyc219acj")))) + "044n6kn16qczpdhp0w0z5x8xpr0rfs9s8q70rafgnvj7a2q1xdd0")))) (properties `((upstream-name . "ChIPexoQual"))) (build-system r-build-system) (propagated-inputs @@ -2177,13 +2265,13 @@ sequencing data.") (define-public r-copynumber (package (name "r-copynumber") - (version "1.24.0") + (version "1.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "copynumber" version)) (sha256 (base32 - "0gmxi7w776pjqv3v0pkdihb167zzrnr9hw64yfvzgjhkhrc6a4rp")))) + "0r6r1adj20x3ckm0dlipxlf1rzngr92xsxxpy81mqxf4jpmyr8gj")))) (build-system r-build-system) (propagated-inputs `(("r-s4vectors" ,r-s4vectors) @@ -2200,14 +2288,14 @@ penalized least squares regression method.") (define-public r-dnacopy (package (name "r-dnacopy") - (version "1.58.0") + (version "1.60.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DNAcopy" version)) (sha256 (base32 - "1gybr3cbsrqjgz00n4l5kb2nrmh302xpvzk5zk957ijj5qbfwmxa")))) + "119z5lqhhw9ppg6s4dvbxk1kxf3wc55ibpm9b88c91s04yd7m9yw")))) (properties `((upstream-name . "DNAcopy"))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -2251,14 +2339,14 @@ clusters).") (define-public r-deds (package (name "r-deds") - (version "1.58.0") + (version "1.60.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DEDS" version)) (sha256 (base32 - "029g7wgxc7yp1cdyalbi8gipkskrgp7nyl1s2whhjy5dqpfcpigs")))) + "0vzsmah2lhxf8k6n4d0i4j609sbvygmb6ii2ridg9z3nskwkrhp8")))) (properties `((upstream-name . "DEDS"))) (build-system r-build-system) (home-page "https://bioconductor.org/packages/DEDS/") @@ -2300,14 +2388,14 @@ and regression inferences from RNA-sequencing data.") (define-public r-ebseq (package (name "r-ebseq") - (version "1.24.0") + (version "1.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "EBSeq" version)) (sha256 (base32 - "13rf85gffqn86r5gqibla3gqrnnag2zinrfawpcsgn3fk7hl3v83")))) + "0ay1vcccpc29r3vinlnwp9256345bfb346kg2y11kib4bnrabjb6")))) (properties `((upstream-name . "EBSeq"))) (build-system r-build-system) (propagated-inputs @@ -2324,14 +2412,14 @@ gene and isoform level using RNA-seq data") (define-public r-lpsymphony (package (name "r-lpsymphony") - (version "1.12.0") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "lpsymphony" version)) (sha256 (base32 - "13wvq4ip8nkyxmpncs6fzcf3vphra1n0fd5vz9kspbch0k1z6bsv")))) + "0j5j9kggh3l61vp6hpnqf45d5kzifksaj0sqhvs1zahmx2c1gfdv")))) (build-system r-build-system) (inputs `(("gfortran" ,gfortran) @@ -2354,14 +2442,14 @@ to install interface to SYMPHONY.") (define-public r-ihw (package (name "r-ihw") - (version "1.12.0") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "IHW" version)) (sha256 (base32 - "05hs6w1albkbyqzkid0bchb5zs41f31a7vhfbcswryhc86cxwzkz")))) + "0rnw7r9pylpj3a5graavcpiqv2v67rv2a4dlcynkf4ihpxs4bg8x")))) (properties `((upstream-name . "IHW"))) (build-system r-build-system) (propagated-inputs @@ -2384,14 +2472,14 @@ independent of the p-value under the null hypothesis.") (define-public r-icobra (package (name "r-icobra") - (version "1.12.1") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "iCOBRA" version)) (sha256 (base32 - "1wj0vqyb6h4rddmn4va3182yap9bv4m1r1jlzyjfyrqxhl2sqb1q")))) + "1l0yr2grpwmr3pc5h50p1j4nxyb1ddmc55l7rhxpp4igh4fq1avz")))) (properties `((upstream-name . "iCOBRA"))) (build-system r-build-system) (propagated-inputs @@ -2418,19 +2506,18 @@ interactive exploration of results.") (define-public r-mast (package (name "r-mast") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "MAST" version)) (sha256 (base32 - "0f2qkp346095k9m45frpd3bivrvaps9wlm0m3n0z8j0aj7w1kqlx")))) + "1l78rrwkzyswpj6pgc9z8290fqrk4akba76invkkazpyh91r8gga")))) (properties `((upstream-name . "MAST"))) (build-system r-build-system) (propagated-inputs `(("r-abind" ,r-abind) - ("r-blme" ,r-blme) ("r-biobase" ,r-biobase) ("r-biocgenerics" ,r-biocgenerics) ("r-data-table" ,r-data-table) @@ -2452,14 +2539,14 @@ single cell assay data.") (define-public r-monocle (package (name "r-monocle") - (version "2.12.0") + (version "2.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "monocle" version)) (sha256 (base32 - "1rnr3k0wc61a806w9flapni91wz5xm0l66jabjzx0vbiwgczs32z")))) + "18b9y592q48mbcp5w095qs1kaklq64v6dcnlpqhv3rwxvywygsz2")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) @@ -2569,14 +2656,14 @@ qPCR data, but could be used with other types as well.") (define-public r-noiseq (package (name "r-noiseq") - (version "2.28.0") + (version "2.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "NOISeq" version)) (sha256 (base32 - "1k7k0xqa0lxj6mfsvbmd6x6glv9wynbwl87w5d3bilbq4dpc139j")))) + "1a8p66hhnwmay0rjabwq7356wr93yn33nqgr9rr7whpp9nls1hg4")))) (properties `((upstream-name . "NOISeq"))) (build-system r-build-system) (propagated-inputs @@ -2596,14 +2683,14 @@ assumptions.") (define-public r-scdd (package (name "r-scdd") - (version "1.8.0") + (version "1.10.0") (source (origin (method url-fetch) (uri (bioconductor-uri "scDD" version)) (sha256 (base32 - "01hp6xxxap7541yi5dv596xvamqyyihvgkdy224ixa0n2cxyrhyf")))) + "0nk0qq664zs7dnlcamdkrrhvll01p7f96jj3igbxxlzj3dvr58w4")))) (properties `((upstream-name . "scDD"))) (build-system r-build-system) (propagated-inputs @@ -2632,14 +2719,14 @@ distributions.") (define-public r-scone (package (name "r-scone") - (version "1.8.0") + (version "1.10.0") (source (origin (method url-fetch) (uri (bioconductor-uri "scone" version)) (sha256 (base32 - "00cr0jp1ywxygf2pryw7mmcmn7cp1500fvifkbwgg2qxbkq5zqck")))) + "1hfsbnix0y9ad6bj0d8q2aw13pb3vjcaa0dfwxxapzl90zwbsjhp")))) (build-system r-build-system) (propagated-inputs `(("r-aroma-light" ,r-aroma-light) @@ -2672,14 +2759,14 @@ high-throughput analyses.") (define-public r-geoquery (package (name "r-geoquery") - (version "2.52.0") + (version "2.54.1") (source (origin (method url-fetch) (uri (bioconductor-uri "GEOquery" version)) (sha256 (base32 - "1r8x4jsl1mr9j7wyyqlj0zgwd80vkqhxxqrcgbb78ksryzq45jkr")))) + "0j8mlldy7dc38fx5zwj6z6l4b9bhvrn8sil3z8asnd4ic7w9ifx5")))) (properties `((upstream-name . "GEOquery"))) (build-system r-build-system) (propagated-inputs @@ -2703,14 +2790,14 @@ the bridge between GEO and BioConductor.") (define-public r-illuminaio (package (name "r-illuminaio") - (version "0.26.0") + (version "0.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "illuminaio" version)) (sha256 (base32 - "18plm8p40gfzfmqflxssrdj8az3xvmnmh9i9dafl3af3bxwv03l8")))) + "1psza8jq6h8fv2rm91ah67dgjlnj1l80yracwgdl1agd0ycv90sh")))) (build-system r-build-system) (propagated-inputs `(("r-base64" ,r-base64))) @@ -2724,14 +2811,14 @@ files, including IDAT.") (define-public r-siggenes (package (name "r-siggenes") - (version "1.58.0") + (version "1.60.0") (source (origin (method url-fetch) (uri (bioconductor-uri "siggenes" version)) (sha256 (base32 - "178jmmdxsv3rd71a9w5yrvg5aplak40hb42vna15g1d55c2yv1ib")))) + "03lmq3hqprwps4miynl2vhqi3v4als5vqmz4lb19lk5a4zja72b4")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) @@ -2750,14 +2837,14 @@ Bayes Analyses of Microarrays} (EBAM).") (define-public r-bumphunter (package (name "r-bumphunter") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "bumphunter" version)) (sha256 (base32 - "1dkyicwqdaahnxcxj6kmivkqb47yccx51lb1q0yar3xpw91vwlfx")))) + "1p3gwb954zns61d1pwgkplxnvgk2lixrl93kkkf439wa3vlgsnjv")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -2784,14 +2871,14 @@ studies.") (define-public r-minfi (package (name "r-minfi") - (version "1.30.0") + (version "1.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "minfi" version)) (sha256 (base32 - "0qir0zd0qa97fzm33v10nyrsjp8nmzhn7mn20dnlpsg7rwlf60pd")))) + "177isdvcq2476xybvfbh7x11qsj5nzckgh3b6p156wlx9ap9dvl3")))) (build-system r-build-system) (propagated-inputs `(("r-beanplot" ,r-beanplot) @@ -2833,14 +2920,14 @@ methylation arrays.") (define-public r-methylumi (package (name "r-methylumi") - (version "2.30.0") + (version "2.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "methylumi" version)) (sha256 (base32 - "13acn771ybi10v50x123bq5yqd62b8sr4gz77lpgaj192sxq9d9f")))) + "0zd4h6n37v3z0mas69z2xsf5s0naih828987m8v0g9hhq4f6hf5w")))) (build-system r-build-system) (propagated-inputs `(("r-annotate" ,r-annotate) @@ -2877,14 +2964,14 @@ and Infinium HD arrays are also included.") (define-public r-lumi (package (name "r-lumi") - (version "2.36.0") + (version "2.38.0") (source (origin (method url-fetch) (uri (bioconductor-uri "lumi" version)) (sha256 (base32 - "1rf6xmd2wnajjvnl50q63agakzjf4hrzn2chdsnhapi7fh7bcjba")))) + "0lgrqbdvp7ykcafc0bpnbcsf396na3jj5c35x9ysf5bpcas23nmm")))) (build-system r-build-system) (propagated-inputs `(("r-affy" ,r-affy) @@ -2916,14 +3003,14 @@ especially Illumina Infinium methylation microarrays.") (define-public r-linnorm (package (name "r-linnorm") - (version "2.8.0") + (version "2.10.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Linnorm" version)) (sha256 (base32 - "1rv3ljdwb71364qd2p8za3jpk08agvzwas6f63s5d8wjlapzm3i5")))) + "15mhwiqmp9m65zvrdbr2hhy3x81lf4jbwgjsf75g41if2v2g8x67")))) (properties `((upstream-name . "Linnorm"))) (build-system r-build-system) (propagated-inputs @@ -2975,14 +3062,14 @@ evaluation of DEG analysis methods.") (define-public r-ioniser (package (name "r-ioniser") - (version "2.8.0") + (version "2.10.0") (source (origin (method url-fetch) (uri (bioconductor-uri "IONiseR" version)) (sha256 (base32 - "0kznyqqpm0zbah537p197z1cgrgh9w82whmq0aydfxzgs2vxdw2y")))) + "1c265bzh923i9mw83mjpj0bzbkixbs6sg1h1z51y9xjkakdgg90f")))) (properties `((upstream-name . "IONiseR"))) (build-system r-build-system) (propagated-inputs @@ -3104,14 +3191,14 @@ published results; and a routine for graphical display.") (define-public r-triform (package (name "r-triform") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "triform" version)) (sha256 (base32 - "0bsxkn386kfx4gg19p6smy5fi3k7xdw89r5hvfsks8hsdpdz3hya")))) + "12qdyrcw2mcawqdw65v0hjaghzlwa10xl6j8458izcrm5k6dlvz9")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) @@ -3128,14 +3215,14 @@ peak definition in combination with known profile characteristics.") (define-public r-varianttools (package (name "r-varianttools") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "VariantTools" version)) (sha256 (base32 - "0y37nziipwikg47x4jhhsx0dyv15rrih4a4z43jbzv4jgq4krzql")))) + "0aafcprsqbn1xl8jqnxfl8r2d0lmzhssqpr26lam2cprh3yk0xiv")))) (properties `((upstream-name . "VariantTools"))) (build-system r-build-system) (propagated-inputs @@ -3168,14 +3255,14 @@ gmapR.") (define-public r-heatplus (package (name "r-heatplus") - (version "2.30.0") + (version "2.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Heatplus" version)) (sha256 (base32 - "18b0zy12przp88sj1smvfdd39m17nhhnqzk656bs5pjls2ifmcm6")))) + "0hx5gqgh4xrkx37ccprq7azj9jziff137bdk0gvrixcx52ws6h89")))) (properties `((upstream-name . "Heatplus"))) (build-system r-build-system) (propagated-inputs @@ -3193,14 +3280,14 @@ information about samples and features can be added to the plot.") (define-public r-gosemsim (package (name "r-gosemsim") - (version "2.10.0") + (version "2.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GOSemSim" version)) (sha256 (base32 - "035jbm14rb1rjp2n00dp5bm88ad8a9afv4lvzpkv39nil98nzbdg")))) + "0pqnlgdvh5szjhwc1mw1snjgpj9lrsnk44bn164cl3zwvdayccya")))) (properties `((upstream-name . "GOSemSim"))) (build-system r-build-system) (propagated-inputs @@ -3220,14 +3307,14 @@ sets of GO terms, gene products and gene clusters.") (define-public r-anota (package (name "r-anota") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "anota" version)) (sha256 (base32 - "0jchhyf9gqyj0k0fn5zp319griy32cckqpldq9x58z69l2ix2s2c")))) + "1bkavzrxy1bjz0bwapwa9i3ysln7gljgziwd8c05fmg2f46j1z6m")))) (build-system r-build-system) (propagated-inputs `(("r-multtest" ,r-multtest) @@ -3251,14 +3338,14 @@ the data set is suitable for such analysis.") (define-public r-sigpathway (package (name "r-sigpathway") - (version "1.52.0") + (version "1.54.0") (source (origin (method url-fetch) (uri (bioconductor-uri "sigPathway" version)) (sha256 (base32 - "1mc4lb78rcmpihzjiy4w738cbalw5zxms30z8kyy12s6vbxi6hx7")))) + "057qdkbfldpy6hsysk9mrs1vvsqgyl9yx2s6c2f26jz1pardkbqb")))) (properties `((upstream-name . "sigPathway"))) (build-system r-build-system) (home-page "https://www.pnas.org/cgi/doi/10.1073/pnas.0506577102") @@ -3273,14 +3360,14 @@ phenotype of interest.") (define-public r-fgsea (package (name "r-fgsea") - (version "1.10.1") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "fgsea" version)) (sha256 (base32 - "1k2f9hkp1mvc9fpqzhbf08jd0yg4xaa312v9vy37fxd9pyrwp5a6")))) + "0pbq3g515kcbi4wvfx8m09p01h2f8vwsi1qqsyahxz4r1fasz4c1")))) (build-system r-build-system) (propagated-inputs `(("r-bh" ,r-bh) @@ -3303,14 +3390,14 @@ to multiple hypothesis correction.") (define-public r-dose (package (name "r-dose") - (version "3.10.2") + (version "3.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DOSE" version)) (sha256 (base32 - "06jm1mnfd92s84f21562vsmj6jfkravfqf4lcxx2lk7s4ll66znj")))) + "0ss8mr28q0vswxjmhcas0aqag5nl099jbyn5w3ypbbxqwfvf9jj5")))) (properties `((upstream-name . "DOSE"))) (build-system r-build-system) (propagated-inputs @@ -3337,14 +3424,14 @@ data.") (define-public r-enrichplot (package (name "r-enrichplot") - (version "1.4.0") + (version "1.6.1") (source (origin (method url-fetch) (uri (bioconductor-uri "enrichplot" version)) (sha256 (base32 - "1i9psakvvdc6jn7k7zwpbdhwvf9r8s7649w05mwh1hy978x4rh6h")))) + "0707f5ll58psh7pr001cmmk5di7dprnbry1cy2mw20vn8p24nf3x")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -3360,8 +3447,7 @@ data.") ("r-igraph" ,r-igraph) ("r-purrr" ,r-purrr) ("r-rcolorbrewer" ,r-rcolorbrewer) - ("r-reshape2" ,r-reshape2) - ("r-upsetr" ,r-upsetr))) + ("r-reshape2" ,r-reshape2))) (home-page "https://github.com/GuangchuangYu/enrichplot") (synopsis "Visualization of functional enrichment result") (description @@ -3373,14 +3459,14 @@ All the visualization methods are developed based on ggplot2 graphics.") (define-public r-clusterprofiler (package (name "r-clusterprofiler") - (version "3.12.0") + (version "3.14.2") (source (origin (method url-fetch) (uri (bioconductor-uri "clusterProfiler" version)) (sha256 (base32 - "1jw8h6nlcgd86qhqlcgi3icylb7amcqimlvzg29gay3bf3grwfhq")))) + "1y1l3yf1r1ykl9ngipvyzl5hbxxsfz7z5q5rcywkyss2b2b6gsg8")))) (properties `((upstream-name . "clusterProfiler"))) (build-system r-build-system) @@ -3406,14 +3492,14 @@ profiles (GO and KEGG) of gene and gene clusters.") (define-public r-mlinterfaces (package (name "r-mlinterfaces") - (version "1.64.1") + (version "1.66.0") (source (origin (method url-fetch) (uri (bioconductor-uri "MLInterfaces" version)) (sha256 (base32 - "1c1hciwy37zpr5bzdjj2xxx2r4jdfmr5w0zmg010lm2985z41gqh")))) + "1vnzqd3y3jk1wgxybckzrcgwk0ly7zgcz5ki1ib0bk1jwv6xk5x8")))) (properties `((upstream-name . "MLInterfaces"))) (build-system r-build-system) (propagated-inputs @@ -3447,14 +3533,14 @@ data in R and Bioconductor containers.") (define-public r-annaffy (package (name "r-annaffy") - (version "1.56.0") + (version "1.58.0") (source (origin (method url-fetch) (uri (bioconductor-uri "annaffy" version)) (sha256 (base32 - "0sz96lcw0xc4bw1h3x0j40yh5ragmybsq6zwd0adlwzkhvriqjn9")))) + "1jrf4bq2wky4ay1jrcy60si6hxdcn4j05w5vgs38yfb92gq77i16")))) (build-system r-build-system) (arguments `(#:phases @@ -3483,14 +3569,14 @@ It allows searching of biological metadata using various criteria.") (define-public r-a4core (package (name "r-a4core") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "a4Core" version)) (sha256 (base32 - "1cr0d1w81iygil3pygqzigfb1a0hc248qd9vqvs0n537cxrxq7i7")))) + "0xcs9wl2yrprl4yc0z5s4zrkil3752k9xc1fi8fcx7zab1mm80df")))) (properties `((upstream-name . "a4Core"))) (build-system r-build-system) (propagated-inputs @@ -3506,14 +3592,14 @@ arrays.") (define-public r-a4classif (package (name "r-a4classif") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "a4Classif" version)) (sha256 (base32 - "1jif0w3hx020zzwkaza1a26mf34343y7a3v80ic93in6n53yjhj0")))) + "0gj3hdflfs1ybc2kshl9w1dzy0rfzppfj08hx3wa2chjsm0m9brn")))) (properties `((upstream-name . "a4Classif"))) (build-system r-build-system) (propagated-inputs @@ -3534,14 +3620,14 @@ Affymetrix arrays.") (define-public r-a4preproc (package (name "r-a4preproc") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "a4Preproc" version)) (sha256 (base32 - "13sj4zriq1mian2xcjwkbmmpdjh3h6dgjslar2hc8nmd34cb9xjr")))) + "11j5nc33gd6yis1fyagr0y39g21bzkc59kq8b8sd6b3pfc84zrjd")))) (properties `((upstream-name . "a4Preproc"))) (build-system r-build-system) (propagated-inputs @@ -3556,14 +3642,14 @@ is used for preprocessing the arrays.") (define-public r-a4reporting (package (name "r-a4reporting") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "a4Reporting" version)) (sha256 (base32 - "1lail2iw8jmvfdq9brv7i41k6vmbhx2kp21jxq2cj1zva5rcqssj")))) + "15nd4pa5hkdzkhinvqw5ijdqb7k5gk37v2hmk3jsg2d6m0jqphi5")))) (properties `((upstream-name . "a4Reporting"))) (build-system r-build-system) (propagated-inputs @@ -3579,14 +3665,14 @@ provides reporting features.") (define-public r-a4base (package (name "r-a4base") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "a4Base" version)) (sha256 (base32 - "0yd8gkg3dlkijnms88bxkqsghhc9i32pgd9yaq6hzr67wk879wa1")))) + "0dgqyq4dnlcik5qqygnhxlhfr98sh6kmdcj2qllhrwyk0lmsfk01")))) (properties `((upstream-name . "a4Base"))) (build-system r-build-system) (propagated-inputs @@ -3611,14 +3697,14 @@ Affymetrix arrays.") (define-public r-a4 (package (name "r-a4") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "a4" version)) (sha256 (base32 - "08146qzsr6mjblmh08g83063nnyrfl35z6p65v71isprkydgxyhy")))) + "14yipy6s2wqr9q0yp09x1mm17npknrhs6yd34i3wrb5id64ywnq4")))) (build-system r-build-system) (propagated-inputs `(("r-a4base" ,r-a4base) @@ -3636,14 +3722,14 @@ Affymetrix arrays.") (define-public r-abseqr (package (name "r-abseqr") - (version "1.2.0") + (version "1.4.0") (source (origin (method url-fetch) (uri (bioconductor-uri "abseqR" version)) (sha256 (base32 - "0cbjm7cxjfrkwqhcrrh93w0zf3skmi2p9hyx7acg0ym5fz0ic51r")))) + "1n9h5qkj4njr1f8fvhg9sj9wxcd7hljnnk8m80zwswzs2n9ivppa")))) (properties `((upstream-name . "abseqR"))) (build-system r-build-system) (inputs @@ -3682,14 +3768,14 @@ further downstream analysis on its output.") (define-public r-bacon (package (name "r-bacon") - (version "1.12.0") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "bacon" version)) (sha256 (base32 - "1p6h348kwbsan6dwviclwxx02jcdmf580g5f95w2sgn4jnfv7q1q")))) + "1q18vm4znl47v56cnvx9y5ygrial2mdjpl8x1043jq00kyygrc86")))) (build-system r-build-system) (propagated-inputs `(("r-biocparallel" ,r-biocparallel) @@ -3707,19 +3793,20 @@ fitting a three-component normal mixture on z-scores.") (define-public r-rgadem (package (name "r-rgadem") - (version "2.32.0") + (version "2.34.1") (source (origin (method url-fetch) (uri (bioconductor-uri "rGADEM" version)) (sha256 (base32 - "1zf8ayllf1i79wc39vyln2hii1bgg88sw6h1hngkqx4phyvl9q18")))) + "12xm4p4qsczf57kip8bvi6pr8sb5gvn11dnbz7lbh6sc03sx3q2h")))) (properties `((upstream-name . "rGADEM"))) (build-system r-build-system) (propagated-inputs `(("r-biostrings" ,r-biostrings) ("r-bsgenome" ,r-bsgenome) + ("r-genomicranges" ,r-genomicranges) ("r-iranges" ,r-iranges) ("r-seqlogo" ,r-seqlogo))) (home-page "https://bioconductor.org/packages/rGADEM/") @@ -3732,14 +3819,14 @@ genomic sequence data.") (define-public r-motiv (package (name "r-motiv") - (version "1.40.0") + (version "1.42.0") (source (origin (method url-fetch) (uri (bioconductor-uri "MotIV" version)) (sha256 (base32 - "088z3vyx5h2c4ll4sway01cd4h0x2ayhbv55f6l2kss71v6k6byf")))) + "07k4rw4nhcn4sg43psv1h7qr064gws22m2yyr7x8sy3f1i1c954k")))) (properties `((upstream-name . "MotIV"))) (build-system r-build-system) (inputs @@ -3747,6 +3834,7 @@ genomic sequence data.") (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) ("r-biostrings" ,r-biostrings) + ("r-genomicranges" ,r-genomicranges) ("r-iranges" ,r-iranges) ("r-lattice" ,r-lattice) ("r-rgadem" ,r-rgadem) @@ -3763,19 +3851,20 @@ distributions, modules and filter motifs.") (define-public r-motifstack (package (name "r-motifstack") - (version "1.28.0") + (version "1.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "motifStack" version)) (sha256 (base32 - "0qbv5pvn1g9xfn221vqjmp9vfxpkda1wxkn0kyn2nqyb80d4jf9f")))) + "00rafqs1gqlcxlbsdn9qnq9xb7wjphiksb3hsx76viqjbjzi14wg")))) (properties `((upstream-name . "motifStack"))) (build-system r-build-system) (propagated-inputs `(("r-ade4" ,r-ade4) ("r-biostrings" ,r-biostrings) + ("r-ggplot2" ,r-ggplot2) ("r-grimport2" ,r-grimport2) ("r-htmlwidgets" ,r-htmlwidgets) ("r-motiv" ,r-motiv) @@ -3794,14 +3883,14 @@ type and symbol colors.") (define-public r-genomicscores (package (name "r-genomicscores") - (version "1.8.1") + (version "1.10.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomicScores" version)) (sha256 (base32 - "0xgv5h6hwr4p2p05z8vzhivy97gfirm4rj1ihb5c8fhgc5vp85dy")))) + "175iaqv7npa11yw48vmqpgx0qqs3g44c3dsya7ccwd1lg97fznkj")))) (properties `((upstream-name . "GenomicScores"))) (build-system r-build-system) (propagated-inputs @@ -3825,14 +3914,14 @@ position-specific scores within R and Bioconductor.") (define-public r-atacseqqc (package (name "r-atacseqqc") - (version "1.8.5") + (version "1.10.1") (source (origin (method url-fetch) (uri (bioconductor-uri "ATACseqQC" version)) (sha256 (base32 - "1i8f0vs0z4jbc2yvj1diay7jhcmb1a82zv96xllk771f25nvmmxp")))) + "12ix0bvwk50d48z85f3453k7szm1j27gk4qgw56az4fxra472rlh")))) (properties `((upstream-name . "ATACseqQC"))) (build-system r-build-system) (propagated-inputs @@ -3870,14 +3959,14 @@ footprints.") (define-public r-gofuncr (package (name "r-gofuncr") - (version "1.4.0") + (version "1.6.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GOfuncR" version)) (sha256 (base32 - "1znnkh96yyv6rkbjxx2942nixw4ixdll1f72v92wzsxdcbwkgqdm")))) + "0hmi13pz923fm95asys615rih63b1i2nvynfczr1zcsc9fzn4h35")))) (properties `((upstream-name . "GOfuncR"))) (build-system r-build-system) (propagated-inputs @@ -3917,14 +4006,14 @@ annotations and ontologies.") (define-public r-abaenrichment (package (name "r-abaenrichment") - (version "1.14.1") + (version "1.16.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ABAEnrichment" version)) (sha256 (base32 - "1w322wsp6bd3gyfwzgdf088cvfmpq774knr57d0dj420ljf4xn48")))) + "128ik28j8kmdkycffhxajv5h174zdq9sfn2gz6ai90wgkdadbzwp")))) (properties `((upstream-name . "ABAEnrichment"))) (build-system r-build-system) (propagated-inputs @@ -3947,14 +4036,14 @@ the brain using an ontology, both provided by the Allen Brain Atlas project.") (define-public r-annotationfuncs (package (name "r-annotationfuncs") - (version "1.34.0") + (version "1.36.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AnnotationFuncs" version)) (sha256 (base32 - "12vh07x8s9y74h65q1pnjlma752pz29bmyyhlnqaiy83gsg26hm3")))) + "0ws14b1ibqml7w8kj0gi7wdp6wd8dcdpnrmcxldjzsyawf17q0yq")))) (properties `((upstream-name . "AnnotationFuncs"))) (build-system r-build-system) @@ -3972,14 +4061,14 @@ different identifieres using the Biocore Data Team data-packages (e.g. (define-public r-annotationtools (package (name "r-annotationtools") - (version "1.58.0") + (version "1.60.0") (source (origin (method url-fetch) (uri (bioconductor-uri "annotationTools" version)) (sha256 (base32 - "148fi8bv1m0y81psm0jv1nqvjhvr461drnl0krqd7skcf0mb0fc1")))) + "1cq7ayq2swp2ahlphz74nh5mb869rgyyr0kkqy1mxyilk8k2g44i")))) (properties `((upstream-name . "annotationTools"))) (build-system r-build-system) @@ -3997,14 +4086,14 @@ text files).") (define-public r-allelicimbalance (package (name "r-allelicimbalance") - (version "1.22.0") + (version "1.24.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AllelicImbalance" version)) (sha256 (base32 - "1f51y8zjgz0wdd33qbs1gpnadbprixr4wcfvff6v3s09rmnr8fng")))) + "0vy8w7ii2qljsmq8lr21lygkcrsshc7syyqhadlbxyj3scgi7kyc")))) (properties `((upstream-name . "AllelicImbalance"))) (build-system r-build-system) @@ -4038,21 +4127,23 @@ investigation using RNA-seq data.") (define-public r-aucell (package (name "r-aucell") - (version "1.6.1") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AUCell" version)) (sha256 (base32 - "1vd8w6dygn1b5bwlha09mm6fbwyj07pmawpv53agcg1y7jlxs31b")))) + "1g4mdq8z29fjxrfjng0fb3cvbph49mwds4ijsa2bn2k6f75dnzky")))) (properties `((upstream-name . "AUCell"))) (build-system r-build-system) (propagated-inputs - `(("r-data-table" ,r-data-table) + `(("r-biocgenerics" ,r-biocgenerics) + ("r-data-table" ,r-data-table) ("r-gseabase" ,r-gseabase) ("r-mixtools" ,r-mixtools) ("r-r-utils" ,r-r-utils) + ("r-s4vectors" ,r-s4vectors) ("r-shiny" ,r-shiny) ("r-summarizedexperiment" ,r-summarizedexperiment))) (home-page "https://bioconductor.org/packages/AUCell/") @@ -4073,14 +4164,14 @@ needed.") (define-public r-ebimage (package (name "r-ebimage") - (version "4.26.0") + (version "4.28.1") (source (origin (method url-fetch) (uri (bioconductor-uri "EBImage" version)) (sha256 (base32 - "0c8rfi40959rbpbizpiizkq21az3lfwf2azlj55yz5m61qp7mgsq")))) + "0q54q2nw6p1s4nrj1l8qz78m67xcysj2x82zs43my8iv2g9iifgs")))) (properties `((upstream-name . "EBImage"))) (build-system r-build-system) (propagated-inputs @@ -4112,14 +4203,14 @@ visualization with image data.") (define-public r-yamss (package (name "r-yamss") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "yamss" version)) (sha256 (base32 - "00756szrmfm1jdayl90jgblydn6sick9nagdf77pn7wzh6wlaj23")))) + "1n49a2vg1667wycrjww29xfafngllvpb5nq5wy6pgn0akva91nky")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) @@ -4144,14 +4235,14 @@ analysis.") (define-public r-gtrellis (package (name "r-gtrellis") - (version "1.16.1") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "gtrellis" version)) (sha256 (base32 - "069hln9vflyxic24bxrlmdmz9h3jdd2qaqy898rgk5bn0gqwcjix")))) + "0mgspmv6p1a2k98jyy2dfl0wpa2vh7bhnjfm2xaqmcsxzmbjhh9z")))) (build-system r-build-system) (propagated-inputs `(("r-circlize" ,r-circlize) @@ -4171,14 +4262,14 @@ genomic categories and to add self-defined graphics in the plot.") (define-public r-somaticsignatures (package (name "r-somaticsignatures") - (version "2.20.0") + (version "2.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "SomaticSignatures" version)) (sha256 (base32 - "0wc4ddwngvkc9jhihzaxx8yazqncl1kbgkx8vqn5gd4w2hx0h5bx")))) + "1gvrkahllwz38g3hn9pjlikhfqz19a4qglcqmyrxk7h9ybx5zy5z")))) (properties `((upstream-name . "SomaticSignatures"))) (build-system r-build-system) @@ -4208,14 +4299,14 @@ decomposition algorithms.") (define-public r-yapsa (package (name "r-yapsa") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "YAPSA" version)) (sha256 (base32 - "0rfjn2x6hsqiigd53bnl7z5ix5s2mbpr9glsyihsa7i6iazh3n1q")))) + "132x51f8k8zyx6j8jk05x4lr9q1hlblgvr69wkhn0q3f8mhaj926")))) (properties `((upstream-name . "YAPSA"))) (build-system r-build-system) (propagated-inputs @@ -4248,14 +4339,14 @@ provided.") (define-public r-gcrma (package (name "r-gcrma") - (version "2.56.0") + (version "2.58.0") (source (origin (method url-fetch) (uri (bioconductor-uri "gcrma" version)) (sha256 (base32 - "1wazr3f4hwzpd0cjs2nlnzifr2g1r8a692pxap9xnmrw66zq94s4")))) + "0c9sa9ldlcpdcjdan8m4ndnyaisr6wbarq486sl44ikh7wf1csfx")))) (build-system r-build-system) (propagated-inputs `(("r-affy" ,r-affy) @@ -4284,14 +4375,14 @@ gene-specific bidning is expected.") (define-public r-simpleaffy (package (name "r-simpleaffy") - (version "2.60.0") + (version "2.62.0") (source (origin (method url-fetch) (uri (bioconductor-uri "simpleaffy" version)) (sha256 (base32 - "0zjpbjkk27w56mrxsxynkqc298xxsarsnzbd7injg6zakhlmhy6a")))) + "18bz3pfgp0f7906flrljx97ann8s71pnb8gpw7nah46n8vqc0xcs")))) (build-system r-build-system) (propagated-inputs `(("r-affy" ,r-affy) @@ -4312,14 +4403,14 @@ generating high resolution journal figures.") (define-public r-yaqcaffy (package (name "r-yaqcaffy") - (version "1.44.0") + (version "1.46.0") (source (origin (method url-fetch) (uri (bioconductor-uri "yaqcaffy" version)) (sha256 (base32 - "1v12mbai6gf7wpxbyz4clvr7w1mlbv3scjf4kydfin8wwrrzq670")))) + "0kzzqsf1lfbcmy95w2z0c9qrvp7mbwm50k2l9wvz3xa5wz6xa7gz")))) (build-system r-build-system) (propagated-inputs `(("r-simpleaffy" ,r-simpleaffy))) @@ -4334,14 +4425,14 @@ chips with the MAQC reference datasets.") (define-public r-quantro (package (name "r-quantro") - (version "1.18.0") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "quantro" version)) (sha256 (base32 - "0zfb2s410ijp0didapnq7q4gn2d26wy785cygxyvg8sq6mlw2cab")))) + "09f3x1j50ll5hhn3qwys5x06mii3fqsrk6dkvsxai0kdxv9cjz9m")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) @@ -4365,14 +4456,14 @@ groups.") (define-public r-yarn (package (name "r-yarn") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "yarn" version)) (sha256 (base32 - "00gmwylpdmssz8xpd91d8fsiyglr7f9vc9bdalpa7w5vg4c6d2f6")))) + "0891a10adkhm1zpm7fpcxc2xfxjf9yrpckaz87b2wdjdiwivc4cp")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) @@ -4400,14 +4491,14 @@ large RNA-seq experiments.") (define-public r-roar (package (name "r-roar") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "roar" version)) (sha256 (base32 - "11ib5vr2vrrqsqcikph528c56bp52myyfdlwkklp8m0r15kwpxr7")))) + "1nqw0agx9x8ycdf0gw17fdlnmzpw9x3zig1wcy10xpyhyjdbbi06")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) @@ -4429,14 +4520,14 @@ sites and alignments obtained from standard RNA-seq experiments.") (define-public r-xbseq (package (name "r-xbseq") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "XBSeq" version)) (sha256 (base32 - "12l5qnkg6iahwyfmcsf18hys2i9cjn486sacvsqqfcjj3m88w1gy")))) + "1qr5gvf8jcx6r0ac7d2wmnikswmp3k71lirnw7dyr6fndzrdz9lp")))) (properties `((upstream-name . "XBSeq"))) (build-system r-build-system) (propagated-inputs @@ -4466,14 +4557,14 @@ genes.") (define-public r-massspecwavelet (package (name "r-massspecwavelet") - (version "1.50.0") + (version "1.52.0") (source (origin (method url-fetch) (uri (bioconductor-uri "MassSpecWavelet" version)) (sha256 (base32 - "1qg73qv69fvf2al7znkh9lmyx5qmkqv2mpl33lahdwzkm0lh6n72")))) + "0xnj3ncrwvr2b8msi3g77mgzj0zaksn3lgqdn1abh0ww5wgk83v7")))) (properties `((upstream-name . "MassSpecWavelet"))) (build-system r-build-system) @@ -4490,19 +4581,20 @@ based on @dfn{Continuous Wavelet Transform} (CWT).") (define-public r-xcms (package (name "r-xcms") - (version "3.6.2") + (version "3.8.1") (source (origin (method url-fetch) (uri (bioconductor-uri "xcms" version)) (sha256 (base32 - "0icww3f1kahyk96mc07yhsbyiranzm2614n509as09jf8bdhq23v")))) + "18iglvlvlxrdwn2apdvihj9jxmx0kwm5z37rml67xcj9sfdi3bjb")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) ("r-biocgenerics" ,r-biocgenerics) ("r-biocparallel" ,r-biocparallel) + ("r-iranges" ,r-iranges) ("r-lattice" ,r-lattice) ("r-massspecwavelet" ,r-massspecwavelet) ("r-msnbase" ,r-msnbase) @@ -4526,14 +4618,14 @@ data for high-throughput, untargeted analyte profiling.") (define-public r-wrench (package (name "r-wrench") - (version "1.2.0") + (version "1.4.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Wrench" version)) (sha256 (base32 - "1js4dsgpgwq552r4ay78awd5vhzlmva0v8xvn3dy9v18y4j9k94i")))) + "1s8d7jn0dk5zk2fhvsd4sgicypz4c41nzf19nqzcwb9bd6asgrwm")))) (properties `((upstream-name . "Wrench"))) (build-system r-build-system) (propagated-inputs @@ -4550,14 +4642,14 @@ that arising from 16s metagenomic surveys.") (define-public r-wiggleplotr (package (name "r-wiggleplotr") - (version "1.8.0") + (version "1.10.1") (source (origin (method url-fetch) (uri (bioconductor-uri "wiggleplotr" version)) (sha256 (base32 - "0yl3ymsk5iijbypjg7lf6mkjgb54893vml2v5aqp2q4l8q0ld7l0")))) + "1pj2bsn5azs18mp5hr4g7c6rnds2y2rjjnak2785kaj7xi8jly4m")))) (build-system r-build-system) (propagated-inputs `(("r-assertthat" ,r-assertthat) @@ -4582,14 +4674,14 @@ visualization of exonic read coverage.") (define-public r-widgettools (package (name "r-widgettools") - (version "1.62.0") + (version "1.64.0") (source (origin (method url-fetch) (uri (bioconductor-uri "widgetTools" version)) (sha256 (base32 - "021b4s5vcy68p95p8rrcz8a8b1gyk4k8zq06snn32k2dqr91xi1a")))) + "1nqy3icayacv5mlv5s5xgfli0dqzancs6zpffrl5p237c994nyr5")))) (properties `((upstream-name . "widgetTools"))) (build-system r-build-system) (home-page "https://bioconductor.org/packages/widgetTools/") @@ -4603,14 +4695,14 @@ widgets in R.") (define-public r-webbioc (package (name "r-webbioc") - (version "1.56.0") + (version "1.58.0") (source (origin (method url-fetch) (uri (bioconductor-uri "webbioc" version)) (sha256 (base32 - "0ilrwzbk0v41p6hwng7jmr3hwwb4skdcjqml1mc3xmh99lcvw8hz")))) + "1cwrmvh1l603k6j1r425c4vrqp0zf0x7bgx7y1wnbq4r7yc5sp62")))) (build-system r-build-system) (inputs `(("netpbm" ,netpbm) @@ -4636,14 +4728,14 @@ Currently only Affymetrix oligonucleotide analysis is supported.") (define-public r-zfpkm (package (name "r-zfpkm") - (version "1.6.0") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "zFPKM" version)) (sha256 (base32 - "14knxp8cjjp9fhc6py66c7hrckf112jamz3gl1v60l1f2l1hmfvz")))) + "1hg0vc0ns8d4jpddn1v5a5m13a033b0wf1al01pb1lvmx5mzzr2n")))) (properties `((upstream-name . "zFPKM"))) (build-system r-build-system) (propagated-inputs @@ -4663,14 +4755,14 @@ This algorithm is based on the publication by Hart et al., 2013 (Pubmed ID (define-public r-rbowtie2 (package (name "r-rbowtie2") - (version "1.6.0") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rbowtie2" version)) (sha256 (base32 - "1yphnrk5j52gzvy9g6mw05dzh9sm8xxvhyja59ak68nrs1bh3lq4")))) + "1b7x42n9zisi2w2wwfc0c39j8s9868imyr0ysqgswf6l5mv9ivc5")))) (properties `((upstream-name . "Rbowtie2"))) (build-system r-build-system) (inputs @@ -4686,14 +4778,14 @@ rapid adapter trimming, identification, and read merging.") (define-public r-progeny (package (name "r-progeny") - (version "1.6.0") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "progeny" version)) (sha256 (base32 - "03rm90vfb9ivxhapvs3h5yggfazf8bf5vh1krknvb3xyw27br9dw")))) + "0j3kxjj7xmmwb29p87n3bw7bl38gcb94jrpw32126a578rf1pfrq")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase))) (home-page "https://github.com/saezlab/progeny") @@ -4708,14 +4800,14 @@ expression\".") (define-public r-arrmnormalization (package (name "r-arrmnormalization") - (version "1.24.0") + (version "1.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ARRmNormalization" version)) (sha256 (base32 - "05m7hy1qd4lr1ylb0ld30dirdl9jfp1zhvifl6wvj40x74b6h2d1")))) + "0jj81q454nyh4hr5c56q1hv7i4ynx3rwnvpv08w34a6m77122bi1")))) (properties `((upstream-name . "ARRmNormalization"))) (build-system r-build-system) @@ -4731,14 +4823,14 @@ Infinium HumanMethylation 450k assay.") (define-public r-biocfilecache (package (name "r-biocfilecache") - (version "1.8.0") + (version "1.10.2") (source (origin (method url-fetch) (uri (bioconductor-uri "BiocFileCache" version)) (sha256 (base32 - "1mi8p8hvrdxim8lqsid2cb7284imyjf9rlzsrdlzdjac7dp9bpdb")))) + "0jivhn95y6zv5ryamqk6nyd4l8nlskq64j362l9ml9qw746v0ja6")))) (properties `((upstream-name . "BiocFileCache"))) (build-system r-build-system) (propagated-inputs @@ -4761,14 +4853,14 @@ and data files used across sessions.") (define-public r-iclusterplus (package (name "r-iclusterplus") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "iClusterPlus" version)) (sha256 (base32 - "14x43jjhbp4zwb4dv9rwrm5l5p7h76bc1zkdbiikqip9bzph0viq")))) + "1dzgfzf2x8m62hssvsn1zzag7m444kyxj2vpdxl9nk859dr5pf37")))) (properties `((upstream-name . "iClusterPlus"))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -4791,14 +4883,14 @@ Gaussian distributions.") (define-public r-rbowtie (package (name "r-rbowtie") - (version "1.24.0") + (version "1.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rbowtie" version)) (sha256 (base32 - "1p8gbd2zn677lq8d009p2cplg1jm2jhn81lppipj638i9ynjh44f")))) + "0yy31xhdmf6xb21wlhmxxwfqpm0nil39pb2cs3pq5ia758lb88z4")))) (properties `((upstream-name . "Rbowtie"))) (build-system r-build-system) (inputs @@ -4814,14 +4906,14 @@ alignment tool.") (define-public r-sgseq (package (name "r-sgseq") - (version "1.18.0") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "SGSeq" version)) (sha256 (base32 - "09c0hv74pl310wahyyp4x50g6sz30bvrg24p2j9h7glla5dh2z4s")))) + "0950iv08wd0kjaw55rjn7m6syklvrabwr2zqq74wzyc5afyk2mrw")))) (properties `((upstream-name . "SGSeq"))) (build-system r-build-system) (propagated-inputs @@ -4855,18 +4947,28 @@ interpretation.") (define-public r-rhisat2 (package (name "r-rhisat2") - (version "1.0.3") + (version "1.2.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rhisat2" version)) (sha256 (base32 - "02ig9qci18n93vmya7q6bijrqsbfh69fyg8iqysf89ym2vd3x3c5")))) + "02fn5cm8sj2s9x00505y3iyipn1r3lpvpwpjy2pdxdbpmhb5hy49")))) (properties `((upstream-name . "Rhisat2"))) (build-system r-build-system) - (native-inputs - `(("which" ,which))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'make-reproducible + (lambda _ + (substitute* "src/Makefile" + (("`hostname`") "guix") + (("`date`") "0") + ;; Avoid shelling out to "which". + (("^CC =.*") (which "gcc")) + (("^CPP =.*") (which "g++"))) + #t))))) (propagated-inputs `(("r-genomicfeatures" ,r-genomicfeatures) ("r-genomicranges" ,r-genomicranges) @@ -4883,14 +4985,14 @@ index.") (define-public r-quasr (package (name "r-quasr") - (version "1.24.2") + (version "1.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "QuasR" version)) (sha256 (base32 - "1pshm41iba9nfq2pigk4dyldn5434w83rhgj99cdjnd0rszj7ajx")))) + "07m5q7wasapj2984kwy897510flbhvz7x0fgs7q2vm5wjhfzdrgv")))) (properties `((upstream-name . "QuasR"))) (build-system r-build-system) (inputs @@ -4928,14 +5030,14 @@ quantification of genomic regions of interest.") (define-public r-rqc (package (name "r-rqc") - (version "1.18.0") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rqc" version)) (sha256 (base32 - "09kyn5nc2fqfdm3q07h0x2jyh24vsq5sxxm63ir1lvv250lmal4g")))) + "1nxkrb9kx41g050yz935yrl9pjkakhr8v6whxcvr72gg4r9m2x3m")))) (properties `((upstream-name . "Rqc"))) (build-system r-build-system) (propagated-inputs @@ -4969,14 +5071,14 @@ graphics.") (define-public r-birewire (package (name "r-birewire") - (version "3.16.0") + (version "3.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "BiRewire" version)) (sha256 (base32 - "1gjb18l3gq3w8zl6r5d49hw0r1kfh9f7ghv9hz6y86aniprvb518")))) + "1074cp422ail72yajn8p0bg26h6zzz07nzypnwfyv86qrpvpdw9q")))) (properties `((upstream-name . "BiRewire"))) (build-system r-build-system) (propagated-inputs @@ -4998,14 +5100,14 @@ routines to analyse the resulting networks and their natural projections.") (define-public r-birta (package (name "r-birta") - (version "1.28.0") + (version "1.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "birta" version)) (sha256 (base32 - "12xjyvgmh4h0b7hi4qg50kcpb9003gnh2xyfgncb8l9mzvsbkxc2")))) + "1zhlwapdgkz0fpv5bqfxh9aw6ymnmxnnm1r0n0kfzn5izyjavslg")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) @@ -5024,19 +5126,56 @@ conditions. A Bayesian network is used to model the regulatory structure and Markov-Chain-Monte-Carlo is applied to sample the activity states.") (license license:gpl2+))) +(define-public r-multidataset + (package + (name "r-multidataset") + (version "1.14.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "MultiDataSet" version)) + (sha256 + (base32 + "0iw99ymrv3ls023mpmgyagmb5simgsgadpj0k4bnssfaqnklywlj")))) + (properties `((upstream-name . "MultiDataSet"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-biocgenerics" ,r-biocgenerics) + ("r-genomicranges" ,r-genomicranges) + ("r-ggplot2" ,r-ggplot2) + ("r-ggrepel" ,r-ggrepel) + ("r-iranges" ,r-iranges) + ("r-limma" ,r-limma) + ("r-qqman" ,r-qqman) + ("r-s4vectors" ,r-s4vectors) + ("r-summarizedexperiment" ,r-summarizedexperiment))) + (home-page "https://bioconductor.org/packages/MultiDataSet/") + (synopsis "Implementation of MultiDataSet and ResultSet") + (description + "This package provides an implementation of the BRGE's (Bioinformatic +Research Group in Epidemiology from Center for Research in Environmental +Epidemiology) MultiDataSet and ResultSet. MultiDataSet is designed for +integrating multi omics data sets and ResultSet is a container for omics +results. This package contains base classes for MEAL and rexposome +packages.") + (license license:expat))) + (define-public r-ropls (package (name "r-ropls") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ropls" version)) (sha256 (base32 - "099nv9dgmw3avkxv7cd27r16yj56svjlp5q4i389yp1n0r5zhyl2")))) + "05w1zrq92w3jfwq5sdyj27m5qjg4zv7acywia8vd6y5fbgcnyzlp")))) (build-system r-build-system) - (propagated-inputs `(("r-biobase" ,r-biobase))) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-multidataset" ,r-multidataset))) (native-inputs `(("r-knitr" ,r-knitr))) ; for vignettes (home-page "https://dx.doi.org/10.1021/acs.jproteome.5b00354") @@ -5063,18 +5202,19 @@ coefficients).") (define-public r-biosigner (package (name "r-biosigner") - (version "1.12.0") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "biosigner" version)) (sha256 (base32 - "1643iya40v6whb7lw7y34w5sanbasvj4yhvcygbip667yhphyv5b")))) + "1kdfhw629qczrfms0jmphqz0ksjzi8js00xj92h1lnv092npfk0j")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) ("r-e1071" ,r-e1071) + ("r-multidataset" ,r-multidataset) ("r-randomforest" ,r-randomforest) ("r-ropls" ,r-ropls))) (native-inputs @@ -5098,14 +5238,14 @@ datasets.") (define-public r-annotatr (package (name "r-annotatr") - (version "1.10.0") + (version "1.12.1") (source (origin (method url-fetch) (uri (bioconductor-uri "annotatr" version)) (sha256 (base32 - "1zlhy6swfgqjhhcqn8c6akxd4c4z8p85swfh095imji7hxnlhh1f")))) + "1bibk3p1q4cavqy11xs6rqqhqdjsq2dd7lf7blwcr27s5ajcd6dj")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -5137,14 +5277,14 @@ annotations.") (define-public r-rsubread (package (name "r-rsubread") - (version "1.34.7") + (version "2.0.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rsubread" version)) (sha256 (base32 - "0z4ydk9296bp76ah5y6a7za5jyn4h238xngb789zragly902x83y")))) + "0l8q9y2a4m1di0w5nlxhq9jgliinhgr2fwjpm5ixnqx5j3iprlwd")))) (properties `((upstream-name . "Rsubread"))) (build-system r-build-system) (inputs `(("zlib" ,zlib))) @@ -5161,14 +5301,14 @@ and to both short and long sequence reads.") (define-public r-flowutils (package (name "r-flowutils") - (version "1.48.0") + (version "1.50.0") (source (origin (method url-fetch) (uri (bioconductor-uri "flowUtils" version)) (sha256 (base32 - "1r7b0rszdzjq7jphh65p5m4x5ps0zbbagxl26gn2mapbjdyb47rm")))) + "1xcs19j9p3izvksyy5wzsbicwby0dsa9g2w7gjzwynzgj5dpfr81")))) (properties `((upstream-name . "flowUtils"))) (build-system r-build-system) (propagated-inputs @@ -5187,14 +5327,14 @@ and to both short and long sequence reads.") (define-public r-consensusclusterplus (package (name "r-consensusclusterplus") - (version "1.48.0") + (version "1.50.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ConsensusClusterPlus" version)) (sha256 (base32 - "1mlcm3wq5n8s0gxs35j0ph9576fhbrbrrsj2xy84fy20prcfs4w8")))) + "0pnh5zy6d3c364xxjdn5zp3kf5afhsxv6yzkdn1qspny0pmqlrp4")))) (properties `((upstream-name . "ConsensusClusterPlus"))) (build-system r-build-system) @@ -5209,29 +5349,46 @@ and to both short and long sequence reads.") cluster count and membership by stability evidence in unsupervised analysis.") (license license:gpl2))) +(define-public r-cytolib + (package + (name "r-cytolib") + (version "1.8.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "cytolib" version)) + (sha256 + (base32 + "1zk5i09k782lw6297gl3rh0g4fxswr2ang8dgqj7p0814l7h15k9")))) + (properties `((upstream-name . "cytolib"))) + (build-system r-build-system) + (home-page "https://bioconductor.org/packages/cytolib/") + (synopsis "C++ infrastructure for working with gated cytometry") + (description + "This package provides the core data structure and API to represent and +interact with gated cytometry data.") + (license license:artistic2.0))) + (define-public r-flowcore (package (name "r-flowcore") - (version "1.50.0") + (version "1.52.1") (source (origin (method url-fetch) (uri (bioconductor-uri "flowCore" version)) (sha256 (base32 - "0pvcyzycsmgc8iw60q9xnhllfan6ihwpz3gvk8h1n9jmhpxzylan")))) + "08kvxc187iwlixibx1860jcp5g9bsw8abkv06x2qv1w83fas4pp2")))) (properties `((upstream-name . "flowCore"))) (build-system r-build-system) (propagated-inputs `(("r-bh" ,r-bh) ("r-biobase" ,r-biobase) ("r-biocgenerics" ,r-biocgenerics) - ("r-corpcor" ,r-corpcor) - ("r-graph" ,r-graph) - ("r-mass" ,r-mass) + ("r-cytolib" ,r-cytolib) ("r-matrixstats" ,r-matrixstats) - ("r-rcpp" ,r-rcpp) - ("r-rrcov" ,r-rrcov))) + ("r-rcpp" ,r-rcpp))) (home-page "https://bioconductor.org/packages/flowCore") (synopsis "Basic structures for flow cytometry data") (description @@ -5242,14 +5399,14 @@ with flow cytometry data.") (define-public r-flowmeans (package (name "r-flowmeans") - (version "1.44.0") + (version "1.46.0") (source (origin (method url-fetch) (uri (bioconductor-uri "flowMeans" version)) (sha256 (base32 - "0yp6y3mq5h4nf1d7ybqnriigwfmwanrqavpj3ry482sgiaip1hp2")))) + "1yisrikaafmpb4sig2c5l0wcz4idrs4as7i9x90v6z2v94iq0m8h")))) (properties `((upstream-name . "flowMeans"))) (build-system r-build-system) (propagated-inputs @@ -5265,25 +5422,361 @@ Cytometry data using non-parametric clustering and segmented-regression-based change point detection.") (license license:artistic2.0))) +(define-public r-ncdfflow + (package + (name "r-ncdfflow") + (version "2.32.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "ncdfFlow" version)) + (sha256 + (base32 + "06lscx6h4rg80ifi90rj7z2497b8w1fjipm3l8s3230rkizhh02i")))) + (properties `((upstream-name . "ncdfFlow"))) + (build-system r-build-system) + (inputs + `(("zlib" ,zlib))) + (propagated-inputs + `(("r-bh" ,r-bh) + ("r-biobase" ,r-biobase) + ("r-biocgenerics" ,r-biocgenerics) + ("r-flowcore" ,r-flowcore) + ("r-rcpp" ,r-rcpp) + ("r-rcpparmadillo" ,r-rcpparmadillo) + ("r-rhdf5lib" ,r-rhdf5lib) + ("r-zlibbioc" ,r-zlibbioc))) + (home-page "https://bioconductor.org/packages/ncdfFlow/") + (synopsis "HDF5 based storage for flow cytometry data") + (description + "This package provides HDF5 storage based methods and functions for +manipulation of flow cytometry data.") + (license license:artistic2.0))) + +(define-public r-ggcyto + (package + (name "r-ggcyto") + (version "1.14.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "ggcyto" version)) + (sha256 + (base32 + "165qszvy5z176h1l3dnjb5dcm279b6bjl5n5gzz8wfn4xpn8anc8")))) + (properties `((upstream-name . "ggcyto"))) + (build-system r-build-system) + (propagated-inputs + `(("r-data-table" ,r-data-table) + ("r-flowcore" ,r-flowcore) + ("r-flowworkspace" ,r-flowworkspace) + ("r-ggplot2" ,r-ggplot2) + ("r-gridextra" ,r-gridextra) + ("r-ncdfflow" ,r-ncdfflow) + ("r-plyr" ,r-plyr) + ("r-rcolorbrewer" ,r-rcolorbrewer) + ("r-rlang" ,r-rlang) + ("r-scales" ,r-scales))) + (home-page "https://github.com/RGLab/ggcyto/issues") + (synopsis "Visualize Cytometry data with ggplot") + (description + "With the dedicated fortify method implemented for @code{flowSet}, +@code{ncdfFlowSet} and @code{GatingSet} classes, both raw and gated flow +cytometry data can be plotted directly with ggplot. The @code{ggcyto} wrapper +and some custom layers also make it easy to add gates and population +statistics to the plot.") + (license license:artistic2.0))) + +(define-public r-flowviz + (package + (name "r-flowviz") + (version "1.50.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "flowViz" version)) + (sha256 + (base32 + "0ik16bxcfcg3q26ra3055718kskid64aaazcbqsxalca9ppdm4k7")))) + (properties `((upstream-name . "flowViz"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-flowcore" ,r-flowcore) + ("r-hexbin" ,r-hexbin) + ("r-idpmisc" ,r-idpmisc) + ("r-kernsmooth" ,r-kernsmooth) + ("r-lattice" ,r-lattice) + ("r-latticeextra" ,r-latticeextra) + ("r-mass" ,r-mass) + ("r-rcolorbrewer" ,r-rcolorbrewer))) + (home-page "https://bioconductor.org/packages/flowViz/") + (synopsis "Visualization for flow cytometry") + (description + "This package provides visualization tools for flow cytometry data.") + (license license:artistic2.0))) + +(define-public r-flowclust + (package + (name "r-flowclust") + (version "3.24.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "flowClust" version)) + (sha256 + (base32 + "0k4bgc4mf512njfdfg5ld9l7slgfxyfh766jab87j96zrrgcnj8s")))) + (properties `((upstream-name . "flowClust"))) + (build-system r-build-system) + (arguments + `(#:configure-flags + (list "--configure-args=--enable-bundled-gsl=no"))) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-biocgenerics" ,r-biocgenerics) + ("r-clue" ,r-clue) + ("r-corpcor" ,r-corpcor) + ("r-ellipse" ,r-ellipse) + ("r-flowcore" ,r-flowcore) + ("r-flowviz" ,r-flowviz) + ("r-graph" ,r-graph) + ("r-mnormt" ,r-mnormt))) + (inputs + `(("gsl" ,gsl))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "https://bioconductor.org/packages/flowClust") + (synopsis "Clustering for flow cytometry") + (description + "This package provides robust model-based clustering using a t-mixture +model with Box-Cox transformation.") + (license license:artistic2.0))) + +;; TODO: this package bundles an old version of protobuf. It's not easy to +;; make it use our protobuf package instead. +(define-public r-rprotobuflib + (package + (name "r-rprotobuflib") + (version "1.8.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "RProtoBufLib" version)) + (sha256 + (base32 + "0dlgki21a37bxqh3cf83vl5zqxm86472g8a9plvhrjzzsn3mwnrm")))) + (properties `((upstream-name . "RProtoBufLib"))) + (build-system r-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'unpack-bundled-sources + (lambda _ + (with-directory-excursion "src" + (invoke "tar" "xf" "protobuf-2.6.0.tgz")) + #t))))) + (home-page "https://bioconductor.org/packages/RProtoBufLib/") + (synopsis "C++ headers and static libraries of Protocol buffers") + (description + "This package provides the headers and static library of Protocol buffers +for other R packages to compile and link against.") + (license license:bsd-3))) + +(define-public r-flowworkspace + (package + (name "r-flowworkspace") + (version "3.34.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "flowWorkspace" version)) + (sha256 + (base32 + "0hvbkxyylsygra31l1lxyvbsr5hc50lqy1y7gwrfgrfil4a2m762")))) + (properties `((upstream-name . "flowWorkspace"))) + (build-system r-build-system) + (propagated-inputs + `(("r-bh" ,r-bh) + ("r-biobase" ,r-biobase) + ("r-biocgenerics" ,r-biocgenerics) + ("r-cytolib" ,r-cytolib) + ("r-data-table" ,r-data-table) + ("r-digest" ,r-digest) + ("r-dplyr" ,r-dplyr) + ("r-flowcore" ,r-flowcore) + ("r-flowviz" ,r-flowviz) + ("r-graph" ,r-graph) + ("r-gridextra" ,r-gridextra) + ("r-lattice" ,r-lattice) + ("r-latticeextra" ,r-latticeextra) + ("r-matrixstats" ,r-matrixstats) + ("r-ncdfflow" ,r-ncdfflow) + ("r-rbgl" ,r-rbgl) + ("r-rcolorbrewer" ,r-rcolorbrewer) + ("r-rcpp" ,r-rcpp) + ("r-rcppparallel" ,r-rcppparallel) + ("r-rgraphviz" ,r-rgraphviz) + ("r-rprotobuflib" ,r-rprotobuflib) + ("r-scales" ,r-scales) + ("r-stringr" ,r-stringr))) + (home-page "https://bioconductor.org/packages/flowWorkspace/") + (synopsis "Infrastructure for working with cytometry data") + (description + "This package is designed to facilitate comparison of automated gating +methods against manual gating done in flowJo. This package allows you to +import basic flowJo workspaces into BioConductor and replicate the gating from +flowJo using the @code{flowCore} functionality. Gating hierarchies, groups of +samples, compensation, and transformation are performed so that the output +matches the flowJo analysis.") + (license license:artistic2.0))) + +(define-public r-flowstats + (package + (name "r-flowstats") + (version "3.44.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "flowStats" version)) + (sha256 + (base32 + "0pql0lpf90nra7w6z6nd8l9cgjlsg2pxysfravnbzfhl3pjvd96w")))) + (properties `((upstream-name . "flowStats"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-biocgenerics" ,r-biocgenerics) + ("r-cluster" ,r-cluster) + ("r-fda" ,r-fda) + ("r-flowcore" ,r-flowcore) + ("r-flowviz" ,r-flowviz) + ("r-flowworkspace" ,r-flowworkspace) + ("r-kernsmooth" ,r-kernsmooth) + ("r-ks" ,r-ks) + ("r-lattice" ,r-lattice) + ("r-mass" ,r-mass) + ("r-ncdfflow" ,r-ncdfflow) + ("r-rcolorbrewer" ,r-rcolorbrewer) + ("r-rrcov" ,r-rrcov))) + (home-page "http://www.github.com/RGLab/flowStats") + (synopsis "Statistical methods for the analysis of flow cytometry data") + (description + "This package provides methods and functionality to analyze flow data +that is beyond the basic infrastructure provided by the @code{flowCore} +package.") + (license license:artistic2.0))) + +(define-public r-opencyto + (package + (name "r-opencyto") + (version "1.24.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "openCyto" version)) + (sha256 + (base32 + "0h25nhvq1zq624wsgb55wjcgri9rcd2fnqkb31h9jdakr01dw2sb")))) + (properties `((upstream-name . "openCyto"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-biocgenerics" ,r-biocgenerics) + ("r-clue" ,r-clue) + ("r-data-table" ,r-data-table) + ("r-flowclust" ,r-flowclust) + ("r-flowcore" ,r-flowcore) + ("r-flowstats" ,r-flowstats) + ("r-flowviz" ,r-flowviz) + ("r-flowworkspace" ,r-flowworkspace) + ("r-graph" ,r-graph) + ("r-gtools" ,r-gtools) + ("r-ks" ,r-ks) + ("r-lattice" ,r-lattice) + ("r-mass" ,r-mass) + ("r-ncdfflow" ,r-ncdfflow) + ("r-plyr" ,r-plyr) + ("r-r-utils" ,r-r-utils) + ("r-rbgl" ,r-rbgl) + ("r-rcolorbrewer" ,r-rcolorbrewer) + ("r-rcpp" ,r-rcpp) + ("r-rrcov" ,r-rrcov))) + (home-page "https://bioconductor.org/packages/openCyto") + (synopsis "Hierarchical gating pipeline for flow cytometry data") + (description + "This package is designed to facilitate the automated gating methods in a +sequential way to mimic the manual gating strategy.") + (license license:artistic2.0))) + +(define-public r-cytoml + (package + (name "r-cytoml") + (version "1.12.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "CytoML" version)) + (sha256 + (base32 + "0m8x18wkvis85cawv7j07pk59w76wnzy93ia99gd24j82z4h97p1")))) + (properties `((upstream-name . "CytoML"))) + (build-system r-build-system) + (inputs + `(("libxml2" ,libxml2))) + (propagated-inputs + `(("r-base64enc" ,r-base64enc) + ("r-bh" ,r-bh) + ("r-biobase" ,r-biobase) + ("r-corpcor" ,r-corpcor) + ("r-cytolib" ,r-cytolib) + ("r-data-table" ,r-data-table) + ("r-dplyr" ,r-dplyr) + ("r-flowcore" ,r-flowcore) + ("r-flowworkspace" ,r-flowworkspace) + ("r-ggcyto" ,r-ggcyto) + ("r-graph" ,r-graph) + ("r-jsonlite" ,r-jsonlite) + ("r-lattice" ,r-lattice) + ("r-ncdfflow" ,r-ncdfflow) + ("r-opencyto" ,r-opencyto) + ("r-plyr" ,r-plyr) + ("r-rbgl" ,r-rbgl) + ("r-rcpp" ,r-rcpp) + ("r-rcppparallel" ,r-rcppparallel) + ("r-rgraphviz" ,r-rgraphviz) + ("r-rprotobuflib" ,r-rprotobuflib) + ("r-runit" ,r-runit) + ("r-xml" ,r-xml) + ("r-yaml" ,r-yaml))) + (home-page "https://github.com/RGLab/CytoML") + (synopsis "GatingML interface for cross platform cytometry data sharing") + (description + "This package provides an interface to implementations of the GatingML2.0 +standard to exchange gated cytometry data with other software platforms.") + (license license:artistic2.0))) + (define-public r-flowsom (package (name "r-flowsom") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "FlowSOM" version)) (sha256 (base32 - "03wl3xk7g7vajc4kkrqa0gsbjfxlqr918qi849h5nir31963398l")))) + "0265sq4zvj6d6h5ghqj9xzm4b0z9v65kgyl88cgdcpdkzfnfcvd5")))) (properties `((upstream-name . "FlowSOM"))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) ("r-consensusclusterplus" ,r-consensusclusterplus) + ("r-cytoml" ,r-cytoml) ("r-flowcore" ,r-flowcore) - ("r-flowutils" ,r-flowutils) + ("r-flowworkspace" ,r-flowworkspace) ("r-igraph" ,r-igraph) + ("r-rcolorbrewer" ,r-rcolorbrewer) ("r-tsne" ,r-tsne) ("r-xml" ,r-xml))) (home-page "https://bioconductor.org/packages/FlowSOM/") @@ -5296,14 +5789,14 @@ self-organizing map clustering and minimal spanning trees.") (define-public r-mixomics (package (name "r-mixomics") - (version "6.8.5") + (version "6.10.6") (source (origin (method url-fetch) (uri (bioconductor-uri "mixOmics" version)) (sha256 (base32 - "0s93ai5d7li8pnxd87n12j9gypvac5zfahsk68j7zjv68dglj8s7")))) + "18jwrdyc4pnx917y1kskxz3fqvlrkyy4ny0xqrfcidz0j7p0b7wr")))) (properties `((upstream-name . "mixOmics"))) (build-system r-build-system) (propagated-inputs @@ -5338,29 +5831,21 @@ delete entire rows with missing data.") (define-public r-depecher (package (name "r-depecher") - (version "1.0.3") + (version "1.2.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DepecheR" version)) (sha256 (base32 - "0qj2h2a50fncppvi2phh0mbivxkn1mv702mqpi9mvvkf3bzq8m0h")))) + "1f6zbc0fq7xjflh3mkjx1n83mpppw663dj22rlpxzwp1kpmf6wm5")))) (properties `((upstream-name . "DepecheR"))) (build-system r-build-system) - (arguments - `(#:phases - (modify-phases %standard-phases - (add-after 'unpack 'fix-syntax-error - (lambda _ - (substitute* "src/Makevars" - ((" & ") " && ")) - #t))))) (propagated-inputs `(("r-beanplot" ,r-beanplot) - ("r-biocparallel" ,r-biocparallel) ("r-dosnow" ,r-dosnow) ("r-dplyr" ,r-dplyr) + ("r-fnn" ,r-fnn) ("r-foreach" ,r-foreach) ("r-ggplot2" ,r-ggplot2) ("r-gplots" ,r-gplots) @@ -5371,6 +5856,7 @@ delete entire rows with missing data.") ("r-rcpp" ,r-rcpp) ("r-rcppeigen" ,r-rcppeigen) ("r-reshape2" ,r-reshape2) + ("r-robustbase" ,r-robustbase) ("r-viridis" ,r-viridis))) (home-page "https://bioconductor.org/packages/DepecheR/") (synopsis "Identify traits of clusters in high-dimensional entities") @@ -5388,14 +5874,14 @@ data, to only emphasize the data that actually matters.") (define-public r-rcistarget (package (name "r-rcistarget") - (version "1.4.0") + (version "1.6.0") (source (origin (method url-fetch) (uri (bioconductor-uri "RcisTarget" version)) (sha256 (base32 - "133x2vr86ifbk82q08x1c8q19zsk5za7b6qrzz77dhsyf4bhcvpd")))) + "1nnah7s0jd24fpfyxsf76jas8dm23c3266aps124wdlqsp9q5qjw")))) (properties `((upstream-name . "RcisTarget"))) (build-system r-build-system) (propagated-inputs @@ -5423,14 +5909,14 @@ genes in the gene-set that are ranked above the leading edge).") (define-public r-cicero (package (name "r-cicero") - (version "1.2.0") + (version "1.4.0") (source (origin (method url-fetch) (uri (bioconductor-uri "cicero" version)) (sha256 (base32 - "0f15l8zrh7l7nnvznb66116hvfk15djb9q240vbscm2w0y5fvkcr")))) + "0mmm7vvzq50b5fayid0bw82b5lar3xm9fwl2ya30q0p4db2y6wnz")))) (build-system r-build-system) (propagated-inputs `(("r-assertthat" ,r-assertthat) @@ -5530,14 +6016,14 @@ cisTopics and explore the nature and regulatory proteins driving them.") (define-public r-genie3 (package (name "r-genie3") - (version "1.6.0") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GENIE3" version)) (sha256 (base32 - "0lvrpw4xn7xyinmn13f65i0vkzfzwdj5y8gsa8vyy8kcn83d28fx")))) + "0p67lhgy3lb4nc958s51hx7rvgwhzwfic9xhpsrask40k43spv7l")))) (properties `((upstream-name . "GENIE3"))) (build-system r-build-system) (propagated-inputs `(("r-reshape2" ,r-reshape2))) @@ -5551,16 +6037,18 @@ regulatory networks from expression data.") (define-public r-roc (package (name "r-roc") - (version "1.60.0") + (version "1.62.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ROC" version)) (sha256 (base32 - "1sapnl8kyaldgvdc657wqcmyjb24nvrnaw7v94bbs8yf5pmfm71c")))) + "1aqpyc28czagg3nbybh55vf152nbar61jjw79w04326d97mc3j3y")))) (properties `((upstream-name . "ROC"))) (build-system r-build-system) + (propagated-inputs + `(("r-knitr" ,r-knitr))) (home-page "https://www.bioconductor.org/packages/ROC/") (synopsis "Utilities for ROC curves") (description @@ -5597,14 +6085,14 @@ data.") (define-public r-watermelon (package (name "r-watermelon") - (version "1.28.0") + (version "1.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "wateRmelon" version)) (sha256 (base32 - "0354ahmfvhqw3yfp17rmz35vlgjp262n4q3hr8qyccyrnk2dz17z")))) + "0a66fq04yph9dis91lzjk9kh134zy6fj98yklrwf24r1080qngx0")))) (properties `((upstream-name . "wateRmelon"))) (build-system r-build-system) (propagated-inputs @@ -5634,14 +6122,14 @@ metrics, with methods for objects produced by the @code{methylumi} and (define-public r-gdsfmt (package (name "r-gdsfmt") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "gdsfmt" version)) (sha256 (base32 - "0h3hgwxq26dg09fyxqg545v9dg1dizsj58cf05rncr3jj4f8g0xy")) + "0zc9v62imd0ykz4h30pxa64q0y45qijmkwdk2pd4ncsg8fc2jlz9")) (modules '((guix build utils))) ;; Remove bundled sources of zlib, lz4, and xz. Don't attempt to build ;; them and link with system libraries instead. @@ -5691,14 +6179,14 @@ with multiple R processes supported by the package @code{parallel}.") (define-public r-bigmelon (package (name "r-bigmelon") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "bigmelon" version)) (sha256 (base32 - "0269kf3d34dbng3swk7pclpk02vy4k3askygmzi5my3fqyfzdkj9")))) + "0sw7rp4p03m1s72b4j06jfb7as3v1n2w2z4ppk8s4f80fb05bcls")))) (properties `((upstream-name . "bigmelon"))) (build-system r-build-system) (propagated-inputs @@ -5719,14 +6207,14 @@ with multiple R processes supported by the package @code{parallel}.") (define-public r-seqbias (package (name "r-seqbias") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "seqbias" version)) (sha256 (base32 - "1pk97jsq0rxijsdm5wnmlw79mhy19skdq1h3mmfbdjh560md47lw")))) + "19vbdyjblij2533ibmrw1n0rkqfrbflma6cg5b79ghks0mg7z8hq")))) (properties `((upstream-name . "seqbias"))) (build-system r-build-system) (propagated-inputs @@ -5747,14 +6235,14 @@ genome sequence.") (define-public r-reqon (package (name "r-reqon") - (version "1.30.0") + (version "1.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ReQON" version)) (sha256 (base32 - "04bljr8vgb9z9800d9v8w7a4rvjkwq48zd8n5divq30zj9k2na7a")))) + "10p6l2zxijqyypdm970jyfqyrnfhaq3nf7cg2q6mgd1srggfa0cx")))) (properties `((upstream-name . "ReQON"))) (build-system r-build-system) (propagated-inputs @@ -5772,14 +6260,14 @@ format.") (define-public r-wavcluster (package (name "r-wavcluster") - (version "2.18.0") + (version "2.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "wavClusteR" version)) (sha256 (base32 - "02i53dskirzr9nls3dsmv7dqhvy3vikkpx7247zpy2qd9r5yvhy2")))) + "0vq3xxsvwq86rlya7xc92sc4i6b48sib0pcina3xivg3ky2j3z7y")))) (properties `((upstream-name . "wavClusteR"))) (build-system r-build-system) (propagated-inputs @@ -5818,14 +6306,14 @@ procedures that induce nucleotide substitutions (e.g. BisSeq).") (define-public r-timeseriesexperiment (package (name "r-timeseriesexperiment") - (version "1.2.0") + (version "1.4.0") (source (origin (method url-fetch) (uri (bioconductor-uri "TimeSeriesExperiment" version)) (sha256 (base32 - "1j11g7a2p0yk38fx6wd6152l1xynghj01pfxihalw601jwf1bl0y")))) + "0xqa6hzknnci20zx2f6mw5cpqx8pq0v6fzf053hh51p1l2ikvgqm")))) (properties `((upstream-name . "TimeSeriesExperiment"))) (build-system r-build-system) @@ -5857,14 +6345,14 @@ provides methods for retrieving enriched pathways.") (define-public r-variantfiltering (package (name "r-variantfiltering") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "VariantFiltering" version)) (sha256 (base32 - "0vpghxacqcbaxx2scb5gfhcmfpw1lkls7h6qnbwbnmjwy01q2p17")))) + "13pgfk2mbffd9smmxnwz7g0jrwng78711053wfzadr107zbyn4r8")))) (properties `((upstream-name . "VariantFiltering"))) (build-system r-build-system) @@ -5904,14 +6392,14 @@ populations, splice site strength, conservation, etc.") (define-public r-genomegraphs (package (name "r-genomegraphs") - (version "1.44.0") + (version "1.46.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomeGraphs" version)) (sha256 (base32 - "026skcn2cqchlzaqsnk11gb8d8aq1rz7lrnx4mmsba234mh4j7kd")))) + "05vavhz936v7cknig2f2mn3fd9fiy54r3swlvifpawramblp1ags")))) (properties `((upstream-name . "GenomeGraphs"))) (build-system r-build-system) (propagated-inputs @@ -5932,14 +6420,14 @@ same genome coordinate system.") (define-public r-wavetiling (package (name "r-wavetiling") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "waveTiling" version)) (sha256 (base32 - "0l0saa0myabpq2rl9dq70zff8jpxr3mkanxlj65hc41f0m5xllir")))) + "0d7l559zlmly8mncmh1zhkqmsml0bwwfpm7ccp8l26y852vwf7hf")))) (properties `((upstream-name . "waveTiling"))) (build-system r-build-system) (propagated-inputs @@ -5963,14 +6451,14 @@ arrays based on fast wavelet-based functional models.") (define-public r-variancepartition (package (name "r-variancepartition") - (version "1.14.1") + (version "1.16.0") (source (origin (method url-fetch) (uri (bioconductor-uri "variancePartition" version)) (sha256 (base32 - "0w4kri2389x1082xppx7l6xl1a5g74fyp02iwb4938x3gzwqwbjd")))) + "1ygx7f2sp4b7ilgspm6vqcbjxs7br9s6g3gwcdb978kx03ymp4i8")))) (properties `((upstream-name . "variancePartition"))) (build-system r-build-system) @@ -6005,14 +6493,14 @@ measures.") (define-public r-htqpcr (package (name "r-htqpcr") - (version "1.38.0") + (version "1.40.0") (source (origin (method url-fetch) (uri (bioconductor-uri "HTqPCR" version)) (sha256 (base32 - "09xgj797f0qsbm4jswxw7ijjwa4jxg06bfkq66xfhbvascyyrhg7")))) + "008iczqaa0wn5nw144vfg3qylg7qa1q963nq9mqhgj3sxlg4rmjx")))) (properties `((upstream-name . "HTqPCR"))) (build-system r-build-system) (propagated-inputs @@ -6038,14 +6526,14 @@ features (e.g. genes, microRNAs).") (define-public r-unifiedwmwqpcr (package (name "r-unifiedwmwqpcr") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "unifiedWMWqPCR" version)) (sha256 (base32 - "10j70bp5y1x2prz2iagqmwf04y79yqinq08wz4ilh8wggb9f7l8a")))) + "1l6rf7scxxyz4x0m4li54y6905sqj4jrx481zb9h3vqhcfcmn8lj")))) (properties `((upstream-name . "unifiedWMWqPCR"))) (build-system r-build-system) @@ -6059,3 +6547,863 @@ features (e.g. genes, microRNAs).") data. This modified test allows for testing differential expression in qPCR data.") (license license:gpl2+))) + +;; This is a CRAN package, but it depends on Bioconductor packages, so we put +;; it here. +(define-public r-activedriverwgs + (package + (name "r-activedriverwgs") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "ActiveDriverWGS" version)) + (sha256 + (base32 + "08l9dj8d3cd74z1dqn8n4yqykwvqjxsfa067wnxyh7xnfvvnm5v1")))) + (properties + `((upstream-name . "ActiveDriverWGS"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biostrings" ,r-biostrings) + ("r-bsgenome" ,r-bsgenome) + ("r-bsgenome-hsapiens-ucsc-hg19" ,r-bsgenome-hsapiens-ucsc-hg19) + ("r-genomeinfodb" ,r-genomeinfodb) + ("r-genomicranges" ,r-genomicranges) + ("r-iranges" ,r-iranges) + ("r-plyr" ,r-plyr) + ("r-s4vectors" ,r-s4vectors))) + (home-page "https://cran.r-project.org/web/packages/ActiveDriverWGS/") + (synopsis "Driver discovery tool for cancer whole genomes") + (description + "This package provides a method for finding an enrichment of cancer +simple somatic mutations (SNVs and Indels) in functional elements across the +human genome. ActiveDriverWGS detects coding and noncoding driver elements +using whole genome sequencing data.") + (license license:gpl3))) + +;; This is a CRAN package, but it depends on Bioconductor packages, so we put +;; it here. +(define-public r-activepathways + (package + (name "r-activepathways") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "ActivePathways" version)) + (sha256 + (base32 + "1xb0d1svmzw404pv8ja6wr4773k7x2lxkrzrayilvzqbfzj1wx20")))) + (properties + `((upstream-name . "ActivePathways"))) + (build-system r-build-system) + (propagated-inputs + `(("r-data-table" ,r-data-table) + ("r-ggplot2" ,r-ggplot2) + ("r-metap" ,r-metap))) + (home-page "https://cran.r-project.org/web/packages/ActivePathways/") + (synopsis "Multivariate pathway enrichment analysis") + (description + "This package represents an integrative method of analyzing multi omics +data that conducts enrichment analysis of annotated gene sets. ActivePathways +uses a statistical data fusion approach, rationalizes contributing evidence +and highlights associated genes, improving systems-level understanding of +cellular organization in health and disease.") + (license license:gpl3))) + +(define-public r-bgmix + (package + (name "r-bgmix") + (version "1.46.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BGmix" version)) + (sha256 + (base32 + "1bwqqhkh4m3hhpd71grwjrg7n07lzvys4y7aghmw2gw5ibnk5683")))) + (properties `((upstream-name . "BGmix"))) + (build-system r-build-system) + (propagated-inputs + `(("r-kernsmooth" ,r-kernsmooth))) + (home-page "https://bioconductor.org/packages/BGmix/") + (synopsis "Bayesian models for differential gene expression") + (description + "This package provides fully Bayesian mixture models for differential +gene expression.") + (license license:gpl2))) + +(define-public r-bgx + (package + (name "r-bgx") + (version "1.52.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "bgx" version)) + (sha256 + (base32 + "0fiqqv6pin0zhxaw67hzfjccq2qkl9qfqjf10nx2zmpxm2licavm")))) + (properties `((upstream-name . "bgx"))) + (build-system r-build-system) + (propagated-inputs + `(("r-affy" ,r-affy) + ("r-biobase" ,r-biobase) + ("r-gcrma" ,r-gcrma) + ("r-rcpp" ,r-rcpp))) + (home-page "https://bioconductor.org/packages/bgx/") + (synopsis "Bayesian gene expression") + (description + "This package provides tools for Bayesian integrated analysis of +Affymetrix GeneChips.") + (license license:gpl2))) + +(define-public r-bhc + (package + (name "r-bhc") + (version "1.38.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BHC" version)) + (sha256 + (base32 + "1bxx3jak8mgvay3j1xd59bb9j86pzl6hh5abxww9x1b7rswmy1jh")))) + (properties `((upstream-name . "BHC"))) + (build-system r-build-system) + (home-page "https://bioconductor.org/packages/BHC/") + (synopsis "Bayesian hierarchical clustering") + (description + "The method implemented in this package performs bottom-up hierarchical +clustering, using a Dirichlet Process (infinite mixture) to model uncertainty +in the data and Bayesian model selection to decide at each step which clusters +to merge. This avoids several limitations of traditional methods, for example +how many clusters there should be and how to choose a principled distance +metric. This implementation accepts multinomial (i.e. discrete, with 2+ +categories) or time-series data. This version also includes a randomised +algorithm which is more efficient for larger data sets.") + (license license:gpl3))) + +(define-public r-bicare + (package + (name "r-bicare") + (version "1.44.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BicARE" version)) + (sha256 + (base32 + "1gia5vzmvbk4k1vx3bh9nld1ws9s3c0y11qfbzqhfnfjbd7n8qcs")))) + (properties `((upstream-name . "BicARE"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-gseabase" ,r-gseabase) + ("r-multtest" ,r-multtest))) + (home-page "http://bioinfo.curie.fr") + (synopsis "Biclustering analysis and results exploration") + (description + "This is a package for biclustering analysis and exploration of +results.") + (license license:gpl2))) + +(define-public r-bifet + (package + (name "r-bifet") + (version "1.6.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiFET" version)) + (sha256 + (base32 + "0ck1d6hxd4f40hfz8p2z5xmjbz79yhrf6fisjka2xzk5v9fm4p4k")))) + (properties `((upstream-name . "BiFET"))) + (build-system r-build-system) + (propagated-inputs + `(("r-genomicranges" ,r-genomicranges) + ("r-poibin" ,r-poibin))) + (home-page "https://bioconductor.org/packages/BiFET") + (synopsis "Bias-free footprint enrichment test") + (description + "BiFET identifies @dfn{transcription factors} (TFs) whose footprints are +over-represented in target regions compared to background regions after +correcting for the bias arising from the imbalance in read counts and GC +contents between the target and background regions. For a given TF k, BiFET +tests the null hypothesis that the target regions have the same probability of +having footprints for the TF k as the background regions while correcting for +the read count and GC content bias.") + (license license:gpl3))) + +(define-public r-rsbml + (package + (name "r-rsbml") + (version "2.44.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "rsbml" version)) + (sha256 + (base32 + "1dbp0aaijxn3na26b68ws0v9qzvml61ifb9z4i8pz7q6h48n7lxa")))) + (properties `((upstream-name . "rsbml"))) + (build-system r-build-system) + (inputs + `(("libsbml" ,libsbml) + ("zlib" ,zlib))) + (propagated-inputs + `(("r-biocgenerics" ,r-biocgenerics) + ("r-graph" ,r-graph))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "http://www.sbml.org") + (synopsis "R support for SBML") + (description + "This package provides an R interface to libsbml for SBML parsing, +validating output, provides an S4 SBML DOM, converts SBML to R graph objects.") + (license license:artistic2.0))) + +(define-public r-hypergraph + (package + (name "r-hypergraph") + (version "1.58.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "hypergraph" version)) + (sha256 + (base32 + "1bixmslxy7r987zw1vf4dg72hfi04lf4vj03n7ygym2g8nfhbh7m")))) + (properties `((upstream-name . "hypergraph"))) + (build-system r-build-system) + (propagated-inputs + `(("r-graph" ,r-graph))) + (home-page "https://bioconductor.org/packages/hypergraph") + (synopsis "Hypergraph data structures") + (description + "This package implements some simple capabilities for representing and +manipulating hypergraphs.") + (license license:artistic2.0))) + +(define-public r-hyperdraw + (package + (name "r-hyperdraw") + (version "1.38.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "hyperdraw" version)) + (sha256 + (base32 + "0a8h3pb7196qi49ady8ni92m5wqb1hvxw6khk9j63mwj3h7jinbj")))) + (properties `((upstream-name . "hyperdraw"))) + (build-system r-build-system) + (inputs `(("graphviz" ,graphviz))) + (propagated-inputs + `(("r-graph" ,r-graph) + ("r-hypergraph" ,r-hypergraph) + ("r-rgraphviz" ,r-rgraphviz))) + (home-page "https://bioconductor.org/packages/hyperdraw") + (synopsis "Visualizing hypergraphs") + (description + "This package provides functions for visualizing hypergraphs.") + (license license:gpl2+))) + +(define-public r-biggr + (package + (name "r-biggr") + (version "1.22.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiGGR" version)) + (sha256 + (base32 + "1n2ypc84abmhn6br0yi87k7lvjc11k7abzhgvzdabc2ai1qgcqif")))) + (properties `((upstream-name . "BiGGR"))) + (build-system r-build-system) + (propagated-inputs + `(("r-hyperdraw" ,r-hyperdraw) + ("r-hypergraph" ,r-hypergraph) + ("r-lim" ,r-lim) + ("r-limsolve" ,r-limsolve) + ("r-rsbml" ,r-rsbml) + ("r-stringr" ,r-stringr))) + (home-page "https://bioconductor.org/packages/BiGGR/") + (synopsis "Constraint based modeling using metabolic reconstruction databases") + (description + "This package provides an interface to simulate metabolic reconstruction +from the @url{http://bigg.ucsd.edu/, BiGG database} and other metabolic +reconstruction databases. The package facilitates @dfn{flux balance +analysis} (FBA) and the sampling of feasible flux distributions. Metabolic +networks and estimated fluxes can be visualized with hypergraphs.") + (license license:gpl3+))) + +(define-public r-bigmemoryextras + (package + (name "r-bigmemoryextras") + (version "1.34.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "bigmemoryExtras" version)) + (sha256 + (base32 + "17dk7c44ikphcrpi8hnxyvlmj30qmj098kc0ihfi69bp9rw1cibq")))) + (properties + `((upstream-name . "bigmemoryExtras"))) + (build-system r-build-system) + (propagated-inputs + `(("r-bigmemory" ,r-bigmemory))) + (home-page "https://github.com/phaverty/bigmemoryExtras") + (synopsis "Extension of the bigmemory package") + (description + "This package defines a @code{BigMatrix} @code{ReferenceClass} which adds +safety and convenience features to the @code{filebacked.big.matrix} class from +the @code{bigmemory} package. @code{BigMatrix} protects against segfaults by +monitoring and gracefully restoring the connection to on-disk data and it also +protects against accidental data modification with a filesystem-based +permissions system. Utilities are provided for using @code{BigMatrix}-derived +classes as @code{assayData} matrices within the @code{Biobase} package's +@code{eSet} family of classes. @code{BigMatrix} provides some optimizations +related to attaching to, and indexing into, file-backed matrices with +dimnames. Additionally, the package provides a @code{BigMatrixFactor} class, +a file-backed matrix with factor properties.") + (license license:artistic2.0))) + +(define-public r-bigpint + (package + (name "r-bigpint") + (version "1.2.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "bigPint" version)) + (sha256 + (base32 + "10vs0lzfyxp6sm4r9pxfwipjvzmmaqnvwn1hc5q37s5qz44fg0hk")))) + (properties `((upstream-name . "bigPint"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-ggally" ,r-ggally) + ("r-ggplot2" ,r-ggplot2) + ("r-gridextra" ,r-gridextra) + ("r-hexbin" ,r-hexbin) + ("r-hmisc" ,r-hmisc) + ("r-htmlwidgets" ,r-htmlwidgets) + ("r-plotly" ,r-plotly) + ("r-plyr" ,r-plyr) + ("r-rcolorbrewer" ,r-rcolorbrewer) + ("r-reshape" ,r-reshape) + ("r-shiny" ,r-shiny) + ("r-shinycssloaders" ,r-shinycssloaders) + ("r-shinydashboard" ,r-shinydashboard) + ("r-stringr" ,r-stringr) + ("r-tidyr" ,r-tidyr))) + (home-page "https://github.com/lindsayrutter/bigPint") + (synopsis "Big multivariate data plotted interactively") + (description + "This package provides methods for visualizing large multivariate +datasets using static and interactive scatterplot matrices, parallel +coordinate plots, volcano plots, and litre plots. It includes examples for +visualizing RNA-sequencing datasets and differentially expressed genes.") + (license license:gpl3))) + +(define-public r-chemminer + (package + (name "r-chemminer") + (version "3.38.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "ChemmineR" version)) + (sha256 + (base32 + "1j6vmkhc03dmmkm5wgbcv62pw5dclp49f906xkx1pwg27bdldbga")))) + (properties `((upstream-name . "ChemmineR"))) + (build-system r-build-system) + (propagated-inputs + `(("r-base64enc" ,r-base64enc) + ("r-bh" ,r-bh) + ("r-biocgenerics" ,r-biocgenerics) + ("r-dbi" ,r-dbi) + ("r-digest" ,r-digest) + ("r-dt" ,r-dt) + ("r-ggplot2" ,r-ggplot2) + ("r-gridextra" ,r-gridextra) + ("r-png" ,r-png) + ("r-rcpp" ,r-rcpp) + ("r-rcurl" ,r-rcurl) + ("r-rjson" ,r-rjson) + ("r-rsvg" ,r-rsvg))) + (home-page "https://github.com/girke-lab/ChemmineR") + (synopsis "Cheminformatics toolkit for R") + (description + "ChemmineR is a cheminformatics package for analyzing drug-like small +molecule data in R. It contains functions for efficient processing of large +numbers of molecules, physicochemical/structural property predictions, +structural similarity searching, classification and clustering of compound +libraries with a wide spectrum of algorithms. In addition, it offers +visualization functions for compound clustering results and chemical +structures.") + (license license:artistic2.0))) + +(define-public r-bioassayr + (package + (name "r-bioassayr") + (version "1.24.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "bioassayR" version)) + (sha256 + (base32 + "08vxkvxhqnryfbj4dwk3ifb9pn544www9zk2pj9fjbh5xfpwi7zw")))) + (properties `((upstream-name . "bioassayR"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biocgenerics" ,r-biocgenerics) + ("r-chemminer" ,r-chemminer) + ("r-dbi" ,r-dbi) + ("r-matrix" ,r-matrix) + ("r-rjson" ,r-rjson) + ("r-rsqlite" ,r-rsqlite) + ("r-xml" ,r-xml))) + (home-page "https://github.com/TylerBackman/bioassayR") + (synopsis "Cross-target analysis of small molecule bioactivity") + (description + "bioassayR is a computational tool that enables simultaneous analysis of +thousands of bioassay experiments performed over a diverse set of compounds +and biological targets. Unique features include support for large-scale +cross-target analyses of both public and custom bioassays, generation of +@dfn{high throughput screening fingerprints} (HTSFPs), and an optional +preloaded database that provides access to a substantial portion of publicly +available bioactivity data.") + (license license:artistic2.0))) + +(define-public r-biobroom + (package + (name "r-biobroom") + (version "1.18.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "biobroom" version)) + (sha256 + (base32 + "1480ycdsh9xdhbpr47vdw5g6m8arqsnp8hc19wwhzm8npxh4qqlb")))) + (properties `((upstream-name . "biobroom"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-broom" ,r-broom) + ("r-dplyr" ,r-dplyr) + ("r-tidyr" ,r-tidyr))) + (home-page "https://github.com/StoreyLab/biobroom") + (synopsis "Turn Bioconductor objects into tidy data frames") + (description + "This package contains methods for converting standard objects +constructed by bioinformatics packages, especially those in Bioconductor, and +converting them to @code{tidy} data. It thus serves as a complement to the +@code{broom} package, and follows the same tidy, augment, glance division of +tidying methods. Tidying data makes it easy to recombine, reshape and +visualize bioinformatics analyses.") + ;; Any version of the LGPL. + (license license:lgpl3+))) + +(define-public r-graphite + (package + (name "r-graphite") + (version "1.32.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "graphite" version)) + (sha256 + (base32 + "1r9fk0cpdwm7012pa85dkjcpkml2j89zcznpf4hfdz66anfyyycd")))) + (properties `((upstream-name . "graphite"))) + (build-system r-build-system) + (propagated-inputs + `(("r-annotationdbi" ,r-annotationdbi) + ("r-checkmate" ,r-checkmate) + ("r-graph" ,r-graph) + ("r-httr" ,r-httr) + ("r-rappdirs" ,r-rappdirs))) + (home-page "https://bioconductor.org/packages/graphite/") + (synopsis "Networks from pathway databases") + (description + "Graphite provides networks derived from eight public pathway databases, +and automates the conversion of node identifiers (e.g. from Entrez IDs to gene +symbols).") + (license license:agpl3+))) + +(define-public r-reactomepa + (package + (name "r-reactomepa") + (version "1.30.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "ReactomePA" version)) + (sha256 + (base32 + "1vwc9kj1l4yi7c4f4lnq0i3wl2nrmmhcxyakz8qak122fi92z3j1")))) + (properties `((upstream-name . "ReactomePA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-annotationdbi" ,r-annotationdbi) + ("r-dose" ,r-dose) + ("r-enrichplot" ,r-enrichplot) + ("r-ggplot2" ,r-ggplot2) + ("r-ggraph" ,r-ggraph) + ("r-graphite" ,r-graphite) + ("r-igraph" ,r-igraph) + ("r-reactome-db" ,r-reactome-db))) + (home-page "https://guangchuangyu.github.io/software/ReactomePA") + (synopsis "Reactome pathway analysis") + (description + "This package provides functions for pathway analysis based on the +REACTOME pathway database. It implements enrichment analysis, gene set +enrichment analysis and several functions for visualization.") + (license license:gpl2))) + +(define-public r-ebarrays + (package + (name "r-ebarrays") + (version "2.50.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "EBarrays" version)) + (sha256 + (base32 + "063rhsdp8x0f881kslq06zxfp6b2qabrz4vmfrn8a4v3pd3n7s13")))) + (properties `((upstream-name . "EBarrays"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-cluster" ,r-cluster) + ("r-lattice" ,r-lattice))) + (home-page "https://bioconductor.org/packages/EBarrays/") + (synopsis "Gene clustering and differential expression identification") + (description + "EBarrays provides tools for the analysis of replicated/unreplicated +microarray data.") + (license license:gpl2+))) + +(define-public r-bioccasestudies + (package + (name "r-bioccasestudies") + (version "1.48.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiocCaseStudies" version)) + (sha256 + (base32 + "1sg9vxs24zfz3dg9y0qlrdsq43y0pbahbvcfxzlxjzjw80xzxpbd")))) + (properties + `((upstream-name . "BiocCaseStudies"))) + (build-system r-build-system) + (propagated-inputs `(("r-biobase" ,r-biobase))) + (home-page "https://bioconductor.org/packages/BiocCaseStudies") + (synopsis "Support for the case studies monograph") + (description + "This package provides software and data to support the case studies +monograph.") + (license license:artistic2.0))) + +(define-public r-biocgraph + (package + (name "r-biocgraph") + (version "1.48.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "biocGraph" version)) + (sha256 + (base32 + "1rv2lwiqwg7h7za23n896fs4dpla3xhw6kzwghb6iw5nlm2m61yw")))) + (properties `((upstream-name . "biocGraph"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biocgenerics" ,r-biocgenerics) + ("r-geneplotter" ,r-geneplotter) + ("r-graph" ,r-graph) + ("r-rgraphviz" ,r-rgraphviz))) + (home-page "https://bioconductor.org/packages/biocGraph/") + (synopsis "Graph examples and use cases in Bioinformatics") + (description + "This package provides examples and code that make use of the +different graph related packages produced by Bioconductor.") + (license license:artistic2.0))) + +(define-public r-experimenthub + (package + (name "r-experimenthub") + (version "1.12.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "ExperimentHub" version)) + (sha256 + (base32 + "054w2lkyirbmhgia0rp4nk9zzw3zphz6jxg6fc9zlarp90g64z24")))) + (properties `((upstream-name . "ExperimentHub"))) + (build-system r-build-system) + (propagated-inputs + `(("r-annotationhub" ,r-annotationhub) + ("r-biocfilecache" ,r-biocfilecache) + ("r-biocgenerics" ,r-biocgenerics) + ("r-biocmanager" ,r-biocmanager) + ("r-curl" ,r-curl) + ("r-rappdirs" ,r-rappdirs) + ("r-s4vectors" ,r-s4vectors))) + (home-page "https://bioconductor.org/packages/ExperimentHub/") + (synopsis "Client to access ExperimentHub resources") + (description + "This package provides a client for the Bioconductor ExperimentHub web +resource. ExperimentHub provides a central location where curated data from +experiments, publications or training courses can be accessed. Each resource +has associated metadata, tags and date of modification. The client creates +and manages a local cache of files retrieved enabling quick and reproducible +access.") + (license license:artistic2.0))) + +(define-public r-multiassayexperiment + (package + (name "r-multiassayexperiment") + (version "1.12.1") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "MultiAssayExperiment" version)) + (sha256 + (base32 + "0xpi5qpffg9pn8szkvicpc43a0r534wngyqwvsip8w66zi8c9kpc")))) + (properties + `((upstream-name . "MultiAssayExperiment"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-biocgenerics" ,r-biocgenerics) + ("r-genomicranges" ,r-genomicranges) + ("r-iranges" ,r-iranges) + ("r-s4vectors" ,r-s4vectors) + ("r-summarizedexperiment" ,r-summarizedexperiment) + ("r-tidyr" ,r-tidyr))) + (home-page "http://waldronlab.io/MultiAssayExperiment/") + (synopsis "Integration of multi-omics experiments in Bioconductor") + (description + "MultiAssayExperiment harmonizes data management of multiple assays +performed on an overlapping set of specimens. It provides a familiar +Bioconductor user experience by extending concepts from +@code{SummarizedExperiment}, supporting an open-ended mix of standard data +classes for individual assays, and allowing subsetting by genomic ranges or +rownames.") + (license license:artistic2.0))) + +(define-public r-bioconcotk + (package + (name "r-bioconcotk") + (version "1.6.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiocOncoTK" version)) + (sha256 + (base32 + "0rnah6c01a33yb9663jim9iclan61rpcwprb56mykgn1pf5hywbj")))) + (properties `((upstream-name . "BiocOncoTK"))) + (build-system r-build-system) + (propagated-inputs + `(("r-bigrquery" ,r-bigrquery) + ("r-car" ,r-car) + ("r-complexheatmap" ,r-complexheatmap) + ("r-curatedtcgadata" ,r-curatedtcgadata) + ("r-dbi" ,r-dbi) + ("r-dplyr" ,r-dplyr) + ("r-dt" ,r-dt) + ("r-genomicfeatures" ,r-genomicfeatures) + ("r-genomicranges" ,r-genomicranges) + ("r-ggplot2" ,r-ggplot2) + ("r-ggpubr" ,r-ggpubr) + ("r-graph" ,r-graph) + ("r-httr" ,r-httr) + ("r-iranges" ,r-iranges) + ("r-magrittr" ,r-magrittr) + ("r-plyr" ,r-plyr) + ("r-rgraphviz" ,r-rgraphviz) + ("r-rjson" ,r-rjson) + ("r-s4vectors" ,r-s4vectors) + ("r-scales" ,r-scales) + ("r-shiny" ,r-shiny) + ("r-summarizedexperiment" ,r-summarizedexperiment))) + (home-page "https://bioconductor.org/packages/BiocOncoTK") + (synopsis "Bioconductor components for general cancer genomics") + (description + "The purpose of this package is to provide a central interface to various +tools for genome-scale analysis of cancer studies.") + (license license:artistic2.0))) + +(define-public r-biocor + (package + (name "r-biocor") + (version "1.10.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BioCor" version)) + (sha256 + (base32 + "1bjw02rwmz2d715sgpfp08njb15200ch7cmipsf9hd5835ppg1jl")))) + (properties `((upstream-name . "BioCor"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biocparallel" ,r-biocparallel) + ("r-gseabase" ,r-gseabase) + ("r-matrix" ,r-matrix))) + (home-page "https://llrs.github.io/BioCor/") + (synopsis "Functional similarities") + (description + "This package provides tools to calculate functional similarities based +on the pathways described on KEGG and REACTOME or in gene sets. These +similarities can be calculated for pathways or gene sets, genes, or clusters +and combined with other similarities. They can be used to improve networks, +gene selection, testing relationships, and so on.") + (license license:expat))) + +(define-public r-biocpkgtools + (package + (name "r-biocpkgtools") + (version "1.4.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiocPkgTools" version)) + (sha256 + (base32 + "0gyhb3071pxmvaxla7cxy9k97s3z3ynl62jnqz9jnkd53c7jnd53")))) + (properties `((upstream-name . "BiocPkgTools"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biocmanager" ,r-biocmanager) + ("r-biocviews" ,r-biocviews) + ("r-dplyr" ,r-dplyr) + ("r-dt" ,r-dt) + ("r-gh" ,r-gh) + ("r-graph" ,r-graph) + ("r-htmltools" ,r-htmltools) + ("r-htmlwidgets" ,r-htmlwidgets) + ("r-httr" ,r-httr) + ("r-igraph" ,r-igraph) + ("r-jsonlite" ,r-jsonlite) + ("r-magrittr" ,r-magrittr) + ("r-rbgl" ,r-rbgl) + ("r-readr" ,r-readr) + ("r-rex" ,r-rex) + ("r-rvest" ,r-rvest) + ("r-stringr" ,r-stringr) + ("r-tibble" ,r-tibble) + ("r-tidyr" ,r-tidyr) + ("r-xml2" ,r-xml2))) + (home-page "https://github.com/seandavi/BiocPkgTools") + (synopsis "Collection of tools for learning about Bioconductor packages") + (description + "Bioconductor has a rich ecosystem of metadata around packages, usage, +and build status. This package is a simple collection of functions to access +that metadata from R. The goal is to expose metadata for data mining and +value-added functionality such as package searching, text mining, and +analytics on packages.") + (license license:expat))) + +(define-public r-biocset + (package + (name "r-biocset") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiocSet" version)) + (sha256 + (base32 + "1xcksnvjflrdarn8xqmgf0n6wbsjkq9jazqwp35i52vqcq4ic1j9")))) + (properties `((upstream-name . "BiocSet"))) + (build-system r-build-system) + (propagated-inputs + `(("r-annotationdbi" ,r-annotationdbi) + ("r-dplyr" ,r-dplyr) + ("r-keggrest" ,r-keggrest) + ("r-plyr" ,r-plyr) + ("r-rlang" ,r-rlang) + ("r-rtracklayer" ,r-rtracklayer) + ("r-tibble" ,r-tibble))) + (home-page + "https://bioconductor.org/packages/BiocSet") + (synopsis + "Representing Different Biological Sets") + (description + "BiocSet displays different biological sets in a triple tibble format. +These three tibbles are @code{element}, @code{set}, and @code{elementset}. +The user has the abilty to activate one of these three tibbles to perform +common functions from the @code{dplyr} package. Mapping functionality and +accessing web references for elements/sets are also available in BiocSet.") + (license license:artistic2.0))) + +(define-public r-biocworkflowtools + (package + (name "r-biocworkflowtools") + (version "1.12.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "BiocWorkflowTools" version)) + (sha256 + (base32 + "1v4bhnpdkmllm7aghms9b7369hkrgz7mn69wbrqg1x42pgkf30ad")))) + (properties + `((upstream-name . "BiocWorkflowTools"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biocstyle" ,r-biocstyle) + ("r-bookdown" ,r-bookdown) + ("r-git2r" ,r-git2r) + ("r-httr" ,r-httr) + ("r-knitr" ,r-knitr) + ("r-rmarkdown" ,r-rmarkdown) + ("r-rstudioapi" ,r-rstudioapi) + ("r-stringr" ,r-stringr) + ("r-usethis" ,r-usethis))) + (home-page "https://bioconductor.org/packages/BiocWorkflowTools/") + (synopsis "Tools to aid the development of Bioconductor Workflow packages") + (description + "This package provides functions to ease the transition between +Rmarkdown and LaTeX documents when authoring a Bioconductor Workflow.") + (license license:expat))) + +(define-public r-biodist + (package + (name "r-biodist") + (version "1.58.0") + (source + (origin + (method url-fetch) + (uri (bioconductor-uri "bioDist" version)) + (sha256 + (base32 + "0iabw07px3ybdgbbab0vv350051cm4aq8w47rz9dnmzx4kil9h5q")))) + (properties `((upstream-name . "bioDist"))) + (build-system r-build-system) + (propagated-inputs + `(("r-biobase" ,r-biobase) + ("r-kernsmooth" ,r-kernsmooth))) + (home-page "https://bioconductor.org/packages/bioDist/") + (synopsis "Different distance measures") + (description + "This package provides a collection of software tools for calculating +distance measures.") + (license license:artistic2.0))) diff --git a/gnu/packages/bioinformatics.scm b/gnu/packages/bioinformatics.scm index bdb3ff761b..b7b1777c24 100644 --- a/gnu/packages/bioinformatics.scm +++ b/gnu/packages/bioinformatics.scm @@ -11,9 +11,10 @@ ;;; Copyright © 2017 Arun Isaac <arunisaac@systemreboot.net> ;;; Copyright © 2018 Joshua Sierles, Nextjournal <joshua@nextjournal.com> ;;; Copyright © 2018 Gábor Boskovits <boskovits@gmail.com> -;;; Copyright © 2018 Mădălin Ionel Patrașcu <madalinionel.patrascu@mdc-berlin.de> +;;; Copyright © 2018, 2019 Mădălin Ionel Patrașcu <madalinionel.patrascu@mdc-berlin.de> ;;; Copyright © 2019 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; Copyright © 2019 Brian Leung <bkleung89@gmail.com> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -1615,7 +1616,7 @@ genome (2.9 GB for paired-end).") #t)))) (build-system gnu-build-system) (arguments - '(#:parallel-build? #f ; not supported + '(#:parallel-build? #f ; not supported #:phases (modify-phases %standard-phases (add-after 'unpack 'use-system-samtools @@ -1639,16 +1640,18 @@ genome (2.9 GB for paired-end).") (("#include <bam.h>") "#include <samtools/bam.h>") (("#include <sam.h>") "#include <samtools/sam.h>")) #t))))) + (native-inputs + `(("gcc" ,gcc-5))) ;; doesn't build with later versions (inputs `(("boost" ,boost) ("bowtie" ,bowtie) - ("samtools" ,samtools-0.1) ("ncurses" ,ncurses) - ("python" ,python-2) ("perl" ,perl) - ("zlib" ,zlib) - ("seqan" ,seqan-1))) - (home-page "http://ccb.jhu.edu/software/tophat/index.shtml") + ("python" ,python-2) + ("samtools" ,samtools-0.1) + ("seqan" ,seqan-1) + ("zlib" ,zlib))) + (home-page "https://ccb.jhu.edu/software/tophat/index.shtml") (synopsis "Spliced read mapper for RNA-Seq data") (description "TopHat is a fast splice junction mapper for nucleotide sequence @@ -2995,7 +2998,8 @@ reasonable amount of time and memory. For large alignments, FastTree is (inputs `(("libgtextutils" ,libgtextutils))) (native-inputs - `(("pkg-config" ,pkg-config))) + `(("gcc" ,gcc-6) ;; doesn't build with later versions + ("pkg-config" ,pkg-config))) (home-page "http://hannonlab.cshl.edu/fastx_toolkit/") (synopsis "Tools for FASTA/FASTQ file preprocessing") (description @@ -6669,14 +6673,14 @@ information as possible.") (define-public r-genefilter (package (name "r-genefilter") - (version "1.66.0") + (version "1.68.0") (source (origin (method url-fetch) (uri (bioconductor-uri "genefilter" version)) (sha256 (base32 - "1jq7lam4dnbvz55lx93kcl9afl8xfjd6xs374d35m21bkay418kj")))) + "1xjr02qhldspjwd6y374wgik18fgywb6408wsz471i8b4ik98ckc")))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -6684,7 +6688,7 @@ information as possible.") `(("r-annotate" ,r-annotate) ("r-annotationdbi" ,r-annotationdbi) ("r-biobase" ,r-biobase) - ("r-s4vectors" ,r-s4vectors) + ("r-biocgenerics" ,r-biocgenerics) ("r-survival" ,r-survival))) (home-page "https://bioconductor.org/packages/genefilter") (synopsis "Filter genes from high-throughput experiments") @@ -6696,14 +6700,14 @@ high-throughput sequencing experiments.") (define-public r-deseq2 (package (name "r-deseq2") - (version "1.24.0") + (version "1.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DESeq2" version)) (sha256 (base32 - "0fkk326addm2cw688gnmdzsmri5qx8j6ldnr4xin6kjnwicqhlqd")))) + "1lmbhznfs8dz9ipd53z4ccwvwxqwzx1ayw56jlrvlsambaj8fash")))) (properties `((upstream-name . "DESeq2"))) (build-system r-build-system) (propagated-inputs @@ -6733,14 +6737,14 @@ distribution.") (define-public r-dexseq (package (name "r-dexseq") - (version "1.30.0") + (version "1.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DEXSeq" version)) (sha256 (base32 - "1b2s0vwm97g0wgm4ms0f4pqkqiqmxscnhg700aybl5vx0m2fa8xm")))) + "0sqqb65ckliif2nmvlvc7w49id59z0nvqcdz5gry8l2mn6azrf6a")))) (properties `((upstream-name . "DEXSeq"))) (build-system r-build-system) (propagated-inputs @@ -6776,14 +6780,14 @@ exploration of the results.") (define-public r-annotationforge (package (name "r-annotationforge") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AnnotationForge" version)) (sha256 (base32 - "0m4w8n2711wr28znv646cfc7m5jqlr8friz334zdyjmhg7m2xkb7")))) + "0h2r60v339ajk5r6xq4iwwcpihdvf12fi8255byr2dhglzrd8xl7")))) (properties `((upstream-name . "AnnotationForge"))) (build-system r-build-system) @@ -6806,14 +6810,14 @@ databases. Packages produced are intended to be used with AnnotationDbi.") (define-public r-rbgl (package (name "r-rbgl") - (version "1.60.0") + (version "1.62.1") (source (origin (method url-fetch) (uri (bioconductor-uri "RBGL" version)) (sha256 (base32 - "06brn9hl6lybx6hdfp1sycwj6wn1bjfi8xyhpy0v122v1z8d5mbz")))) + "0ixbkdirf08i400db587r262j52sdwdgk3884nxk5xkbhx2m6vg0")))) (properties `((upstream-name . "RBGL"))) (build-system r-build-system) (propagated-inputs @@ -6829,14 +6833,14 @@ the graph algorithms contained in the Boost library.") (define-public r-gseabase (package (name "r-gseabase") - (version "1.46.0") + (version "1.48.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GSEABase" version)) (sha256 (base32 - "0vh53xk2prjbdkbr3hwfiflx1gh7ilrqs3j1p3lyd6syy3rn9n83")))) + "0kcb90sxlf19d5dxhdbqk9x62svky4262cccl0wxarbq6gf3bd57")))) (properties `((upstream-name . "GSEABase"))) (build-system r-build-system) (propagated-inputs @@ -6856,14 +6860,14 @@ Enrichment Analysis} (GSEA).") (define-public r-category (package (name "r-category") - (version "2.50.0") + (version "2.52.1") (source (origin (method url-fetch) (uri (bioconductor-uri "Category" version)) (sha256 (base32 - "1n36xfnwn2np5f0lix9abvv9w6jb25jqz3xzvqzklz9s1af4k6x4")))) + "0ga0ij9hyzsxa5pavwmv35i8xggia2wygrk4m4z8an0qcvgy3v5g")))) (properties `((upstream-name . "Category"))) (build-system r-build-system) (propagated-inputs @@ -6887,14 +6891,14 @@ analysis.") (define-public r-gostats (package (name "r-gostats") - (version "2.50.0") + (version "2.52.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GOstats" version)) (sha256 (base32 - "1a95i6awm2a8xv42fg2z3n29fg9z29i45kd80hxf6mvqqgzj80xp")))) + "19f4gxm3sbprqrnwzvskvywv6j4ibm8xkrbgg4h0fvh2b5331nwc")))) (properties `((upstream-name . "GOstats"))) (build-system r-build-system) (propagated-inputs @@ -6918,14 +6922,14 @@ testing and other simple calculations.") (define-public r-shortread (package (name "r-shortread") - (version "1.42.0") + (version "1.44.1") (source (origin (method url-fetch) (uri (bioconductor-uri "ShortRead" version)) (sha256 (base32 - "1irqzdgsavjqsq0vva4966qh8qgn7xn9382dmhahm1hxb94qmi59")))) + "1dh3q83hmi4l72vpif6dn51dzbi9ljrjgkq2zxg4sqy2jxv4vwza")))) (properties `((upstream-name . "ShortRead"))) (build-system r-build-system) (inputs @@ -6960,14 +6964,14 @@ ungapped alignment formats.") (define-public r-systempiper (package (name "r-systempiper") - (version "1.18.2") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "systemPipeR" version)) (sha256 (base32 - "18s5vpmw766pm64w7bwwfgpsv9yzhwclf0ya1rpqz8qslw7bbdjf")))) + "17r25v9wcglyma2v1c8fka80dm7fx86saxlsb2aprmwi4h3dhb0j")))) (properties `((upstream-name . "systemPipeR"))) (build-system r-build-system) (propagated-inputs @@ -7007,14 +7011,14 @@ annotation infrastructure.") (define-public r-grohmm (package (name "r-grohmm") - (version "1.18.0") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "groHMM" version)) (sha256 (base32 - "1p368qf8ab1vy8gl2j7rx0l7bvva4m7w06i364rqzs0sdyzlbm3y")))) + "0ywr8f6bfhg2ia3n4rmsxr4v1xqmlyhkwh0rvkgh3yqgnbvihndg")))) (properties `((upstream-name . "groHMM"))) (build-system r-build-system) (propagated-inputs @@ -7240,13 +7244,13 @@ BLAST, KEGG, GenBank, MEDLINE and GO.") (define-public r-biocviews (package (name "r-biocviews") - (version "1.52.2") + (version "1.54.0") (source (origin (method url-fetch) (uri (bioconductor-uri "biocViews" version)) (sha256 (base32 - "0qwrsd9fcpkv7hhzy1scnj7ahdxi6cjary28kqk6b36gkzmnrw4r")))) + "0yn8jys1900d31haayz0ppqk5y79mwjajwp4alz6pln3dbs70f3g")))) (properties `((upstream-name . "biocViews"))) (build-system r-build-system) @@ -7268,13 +7272,13 @@ also known as views, in a controlled vocabulary.") (define-public r-biocstyle (package (name "r-biocstyle") - (version "2.12.0") + (version "2.14.2") (source (origin (method url-fetch) (uri (bioconductor-uri "BiocStyle" version)) (sha256 (base32 - "029x8r9rcx6zy0xixdpwxai4jv4ynb161821fzac6z4r8k418398")))) + "0nc1cbzp5zdwc0rss4r6v7cpgynmmnj3sczwmajr58nabkndwsvf")))) (properties `((upstream-name . "BiocStyle"))) (build-system r-build-system) @@ -7294,13 +7298,13 @@ functionality.") (define-public r-bioccheck (package (name "r-bioccheck") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "BiocCheck" version)) (sha256 (base32 - "1gkw9s6dhdryga9ap5yhvcqg9jsy4cn417ayqk1qiv6fy91fd124")))) + "1qnvl5yajgh67ijkq6gdsafri1k5hyw5gzn2ccqk9ymx6i2xd80g")))) (properties `((upstream-name . "BiocCheck"))) (build-system r-build-system) @@ -7341,13 +7345,13 @@ checks on R packages that are to be submitted to the Bioconductor repository.") (define-public r-s4vectors (package (name "r-s4vectors") - (version "0.22.1") + (version "0.24.1") (source (origin (method url-fetch) (uri (bioconductor-uri "S4Vectors" version)) (sha256 (base32 - "0cpxqb18wd3pjd7bi8lry13sm5ffqahcvvxpk5pwm5xcj30cdlm9")))) + "1rr7ml3gn83g8fbvhgvryyzlh4p3qgpwcrsz6ii4y7gh1hqxggpx")))) (properties `((upstream-name . "S4Vectors"))) (build-system r-build-system) @@ -7368,13 +7372,13 @@ S4Vectors package itself.") (define-public r-iranges (package (name "r-iranges") - (version "2.18.3") + (version "2.20.1") (source (origin (method url-fetch) (uri (bioconductor-uri "IRanges" version)) (sha256 (base32 - "05rw2b2bwns443n7d6lf97zdv1jbqdii2nprhs6x852w73m2a2g3")))) + "0qssp04wfrc1r92hd3szy03n8sdz8vrqjdxa2mcrsc0k0n9bchz5")))) (properties `((upstream-name . "IRanges"))) (build-system r-build-system) @@ -7420,13 +7424,13 @@ ID and species. It is used by functions in the GenomeInfoDb package.") (define-public r-genomeinfodb (package (name "r-genomeinfodb") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomeInfoDb" version)) (sha256 (base32 - "0zkhms81b3jz30q7ag81a1mq1rgqg4izyfdvcni68gvn8gm7kdyk")))) + "07zljs2mfi8rf31g903f43v2f7767xbnflfrx9qjnmgf7bm039x0")))) (properties `((upstream-name . "GenomeInfoDb"))) (build-system r-build-system) @@ -7448,13 +7452,13 @@ names in their natural, rather than lexicographic, order.") (define-public r-edger (package (name "r-edger") - (version "3.26.8") + (version "3.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "edgeR" version)) (sha256 (base32 - "1wwimzviy2vklp80faz7sbbp74qcw2csbmlfgvzj7b785vwarpwg")))) + "1m7l6fbyik1b79v0h9qkmpa39svij1yiw24gxahbdqjg7fzsavh3")))) (properties `((upstream-name . "edgeR"))) (build-system r-build-system) (propagated-inputs @@ -7476,13 +7480,13 @@ CAGE.") (define-public r-variantannotation (package (name "r-variantannotation") - (version "1.30.1") + (version "1.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "VariantAnnotation" version)) (sha256 (base32 - "144x3d3b9a3q5jy4aqrk1nf2yavwjhwlf71s7qyr4x3ms3wmvf8i")))) + "009s7rzp78s2w6iybizina42qx2w8qv3xwjbkpqphmm451maykgs")))) (properties `((upstream-name . "VariantAnnotation"))) (inputs @@ -7515,13 +7519,13 @@ coding changes and predict coding outcomes.") (define-public r-limma (package (name "r-limma") - (version "3.40.6") + (version "3.42.0") (source (origin (method url-fetch) (uri (bioconductor-uri "limma" version)) (sha256 (base32 - "166z8cdh6w90rldqqaar7hyaskwiy4smawjfbn4sn58clv6q3mp8")))) + "0cfynv6qbnar5rl7vjh5lvddd381g9wqx1zd6a7l130hf59mwswn")))) (build-system r-build-system) (home-page "http://bioinf.wehi.edu.au/limma") (synopsis "Package for linear models for microarray and RNA-seq data") @@ -7534,13 +7538,13 @@ different technologies, including microarrays, RNA-seq, and quantitative PCR.") (define-public r-xvector (package (name "r-xvector") - (version "0.24.0") + (version "0.26.0") (source (origin (method url-fetch) (uri (bioconductor-uri "XVector" version)) (sha256 (base32 - "12y09pwy86h1za6cmaxs960r7fs0vjzhl0li8jn59vqq9liza1ap")))) + "0s2gg84yzl5ffkzp6n7kh0jjk1vd90z189f5hkfn18rn67cy2nv7")))) (properties `((upstream-name . "XVector"))) (build-system r-build-system) @@ -7570,13 +7574,13 @@ different technologies, including microarrays, RNA-seq, and quantitative PCR.") (define-public r-genomicranges (package (name "r-genomicranges") - (version "1.36.1") + (version "1.38.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomicRanges" version)) (sha256 (base32 - "1yid84gn0052v52h84685lvk854grl1wl65psmlmxx9yyykgc0jn")))) + "0xdds6ws7jjdfy4x3mb0qhy43kpxdmifmpw0jdk4wgw999zabb50")))) (properties `((upstream-name . "GenomicRanges"))) (build-system r-build-system) @@ -7599,13 +7603,13 @@ manipulating genomic intervals and variables defined along a genome.") (define-public r-biobase (package (name "r-biobase") - (version "2.44.0") + (version "2.46.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Biobase" version)) (sha256 (base32 - "15yl92niqamx3lmwd11zlk0xniibqnh1gi280iadxicmchi83npc")))) + "1gx41083dqlm59vwqdxvc4ny31x91j48mda9n3scg0f2zwasvqgl")))) (properties `((upstream-name . "Biobase"))) (build-system r-build-system) @@ -7621,13 +7625,13 @@ on Bioconductor or which replace R functions.") (define-public r-annotationdbi (package (name "r-annotationdbi") - (version "1.46.1") + (version "1.48.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AnnotationDbi" version)) (sha256 (base32 - "13nanz4nzy0mcda8ljz2g8d81hpqfz6jky7ydz5hpk0g2264b9ga")))) + "09piz1f0xpbb4amskx4ilby6lfrn27hhwk75il2c4lq6m3hr4w8s")))) (properties `((upstream-name . "AnnotationDbi"))) (build-system r-build-system) @@ -7648,21 +7652,23 @@ annotation data packages using SQLite data storage.") (define-public r-biomart (package (name "r-biomart") - (version "2.40.5") + (version "2.42.0") (source (origin (method url-fetch) (uri (bioconductor-uri "biomaRt" version)) (sha256 (base32 - "1kjvxnkpsx3j2hji3cg3ka2gv8a9mg117lzzxyqjb7qa4zw7dipx")))) + "0difh4dsccjzhpfkvajy2adh98ym9164gd6clnsnic6qr6sk86ss")))) (properties `((upstream-name . "biomaRt"))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) + ("r-biocfilecache" ,r-biocfilecache) ("r-httr" ,r-httr) + ("r-openssl" ,r-openssl) ("r-progress" ,r-progress) - ("r-rcurl" ,r-rcurl) + ("r-rappdirs" ,r-rappdirs) ("r-stringr" ,r-stringr) ("r-xml" ,r-xml))) (home-page "https://bioconductor.org/packages/biomaRt") @@ -7681,13 +7687,13 @@ powerful online queries from gene annotation to database mining.") (define-public r-biocparallel (package (name "r-biocparallel") - (version "1.18.1") + (version "1.20.1") (source (origin (method url-fetch) (uri (bioconductor-uri "BiocParallel" version)) (sha256 (base32 - "1j6wbls4qgvi5gj99c51r00jhxrzxk3x3258wg7dcjzbfqypvyw3")))) + "0g0znb4whsvb9hpwx9xaasdi5n4vjqw8cpdyqgrdrjm91rls1h21")))) (properties `((upstream-name . "BiocParallel"))) (build-system r-build-system) @@ -7706,13 +7712,13 @@ objects.") (define-public r-biostrings (package (name "r-biostrings") - (version "2.52.0") + (version "2.54.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Biostrings" version)) (sha256 (base32 - "0inrl97hli3qz6cfxcikc4picmbrqc8phdgqi18ynlvxy5ql64h4")))) + "0pq7g2hflx2cjlpwdj6mscw9hnxvlf5y50dxf48lbrf9r3q9kmyp")))) (properties `((upstream-name . "Biostrings"))) (build-system r-build-system) @@ -7732,13 +7738,13 @@ biological sequences or sets of sequences.") (define-public r-rsamtools (package (name "r-rsamtools") - (version "2.0.3") + (version "2.2.1") (source (origin (method url-fetch) (uri (bioconductor-uri "Rsamtools" version)) (sha256 (base32 - "03qfpaqbffirpnby88mv6h45njfapli28crdvg35h2zi2jkkmhvp")))) + "0hpdc88prpq1gcja89n5s1ndcg81523qrkbkm9gbhm7rm8wmi8cl")))) (properties `((upstream-name . "Rsamtools"))) (build-system r-build-system) @@ -7777,13 +7783,13 @@ tab-delimited (tabix) files.") (define-public r-delayedarray (package (name "r-delayedarray") - (version "0.10.0") + (version "0.12.1") (source (origin (method url-fetch) (uri (bioconductor-uri "DelayedArray" version)) (sha256 (base32 - "0l907ggxndn3f29zvsd5pppmp4c31rb22r6zkhvgph7xdxahyy6z")))) + "1yr4i2x127v814nxg53aibp77p3vg76f3n3hgknpwx3snfhc81xs")))) (properties `((upstream-name . "DelayedArray"))) (build-system r-build-system) @@ -7809,13 +7815,13 @@ array-like objects like @code{DataFrame} objects (typically with Rle columns), (define-public r-summarizedexperiment (package (name "r-summarizedexperiment") - (version "1.14.1") + (version "1.16.1") (source (origin (method url-fetch) (uri (bioconductor-uri "SummarizedExperiment" version)) (sha256 (base32 - "0bhwgzrdipr0qjzc4j0qspqprx3v1rvshmx4j6506dv43pqlgp3f")))) + "1z9bdk49dajafkfvv99nv6zyn6v70iyyy2jgdp5w5z8174a2bnn1")))) (properties `((upstream-name . "SummarizedExperiment"))) (build-system r-build-system) @@ -7840,13 +7846,13 @@ samples.") (define-public r-genomicalignments (package (name "r-genomicalignments") - (version "1.20.1") + (version "1.22.1") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomicAlignments" version)) (sha256 (base32 - "0s3q97q4pgj5jwn4g95al44rahrwsncsf45v01v4071msx3xmjxq")))) + "065xvy4pkda0ajvl1b75iski95k1pnbhxwdq7vkfl8v55915vqh6")))) (properties `((upstream-name . "GenomicAlignments"))) (build-system r-build-system) @@ -7873,13 +7879,13 @@ alignments.") (define-public r-rtracklayer (package (name "r-rtracklayer") - (version "1.44.4") + (version "1.46.0") (source (origin (method url-fetch) (uri (bioconductor-uri "rtracklayer" version)) (sha256 (base32 - "0dnifr58j2si2qbnvap2wslz3xgjv3h4l7a6v7nmmc57hq6kdbym")))) + "0lp9xsm8kqrgpwgwj7qaqcv1z6qynbz084grlpwp94zsp2ppf0n6")))) (build-system r-build-system) (arguments `(#:phases @@ -7920,13 +7926,13 @@ as well as query and modify the browser state, such as the current viewport.") (define-public r-genomicfeatures (package (name "r-genomicfeatures") - (version "1.36.4") + (version "1.38.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomicFeatures" version)) (sha256 (base32 - "0mzqv8pyxx5nwchyx3radym9ws2f9hb50xc9abjsjs4w4pv91j3k")))) + "0xd9rlsicycbanbcfhc97cj8b8vk94g7lkbmhk37w1511bq35wz5")))) (properties `((upstream-name . "GenomicFeatures"))) (build-system r-build-system) @@ -7985,13 +7991,13 @@ information about the latest version of the Gene Ontologies.") (define-public r-topgo (package (name "r-topgo") - (version "2.36.0") + (version "2.38.1") (source (origin (method url-fetch) (uri (bioconductor-uri "topGO" version)) (sha256 (base32 - "09z42jwz5vh289ijz3x68zv5vmgkgcbhlp73vvmna1gld5lh5kz1")))) + "1kw9m2j67895k58lx9msc248pjwblp8clxwgsl01cql7sgi1xzlf")))) (properties `((upstream-name . "topGO"))) (build-system r-build-system) @@ -8018,13 +8024,13 @@ dependencies between GO terms can be implemented and applied.") (define-public r-bsgenome (package (name "r-bsgenome") - (version "1.52.0") + (version "1.54.0") (source (origin (method url-fetch) (uri (bioconductor-uri "BSgenome" version)) (sha256 (base32 - "0zwx42s73hc1vhn0v82i67mcixdwwc6n6q5h5vpnhpxlm4qwgqzp")))) + "0nn1b3h4hmnx5whf2cmzmyxdrcf4myj8c38rwr0sw4rc07xfzndy")))) (properties `((upstream-name . "BSgenome"))) (build-system r-build-system) @@ -8048,13 +8054,13 @@ genome data packages and support for efficient SNP representation.") (define-public r-impute (package (name "r-impute") - (version "1.58.0") + (version "1.60.0") (source (origin (method url-fetch) (uri (bioconductor-uri "impute" version)) (sha256 (base32 - "144jb889979cv3il2zxqk724v3sj1wnzjm3lkspxcvk29dbb9q8j")))) + "0igz1phjd1j9bg9z4kyy7j8v9bxi9sdwz4df26r51i2vavlbrf4q")))) (native-inputs `(("gfortran" ,gfortran))) (build-system r-build-system) @@ -8068,13 +8074,13 @@ microarray data, using nearest neighbor averaging.") (define-public r-seqpattern (package (name "r-seqpattern") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "seqPattern" version)) (sha256 (base32 - "1ljqscbmrmi5d4lzzvg2d86sqzch26yxw57d33qyid300wm60db2")))) + "1gxrq6s2hiyac69idh5r1nbr1s69n0hg4ap2skm4g6857av9pwqf")))) (properties `((upstream-name . "seqPattern"))) (build-system r-build-system) @@ -8095,13 +8101,13 @@ reference point and sorted by a user defined feature.") (define-public r-genomation (package (name "r-genomation") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "genomation" version)) (sha256 (base32 - "06i711pwq9znd7plh0p25skxnnh5dyl61c33k9gma243wvlzmlkj")))) + "1sba928h23b67gr3i4yj1bg655g24l3bcgsf5gvymzrv5idrss1l")))) (build-system r-build-system) (propagated-inputs `(("r-biostrings" ,r-biostrings) @@ -8169,14 +8175,14 @@ downloaded from Encode.") (define-public r-seqlogo (package (name "r-seqlogo") - (version "1.50.0") + (version "1.52.0") (source (origin (method url-fetch) (uri (bioconductor-uri "seqLogo" version)) (sha256 (base32 - "1z63imr1a24nqijpvxaxlakykcsadfqyxl2b3vlllncxnjjvb52b")))) + "0s94aahp8ma1crmp83dz65ifjwrx6wqi3q6005lmbp8yk2x1rkj4")))) (properties `((upstream-name . "seqLogo"))) (build-system r-build-system) (home-page "https://bioconductor.org/packages/seqLogo") @@ -8190,14 +8196,14 @@ Stephens (1990).") (define-public r-motifrg (package (name "r-motifrg") - (version "1.28.0") + (version "1.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "motifRG" version)) (sha256 (base32 - "02c7fbjwdq7pk96bd2rn07l9r2hqy00s3hfpli5ybmwgvc9h9z4z")))) + "0s6wdr036lra9x93r9k8wvicbkgzypjh3jp46h92yacw8d829k0d")))) (properties `((upstream-name . "motifRG"))) (build-system r-build-system) (propagated-inputs @@ -8271,13 +8277,13 @@ R/qtl, to better handle high-dimensional data and complex cross designs.") (define-public r-zlibbioc (package (name "r-zlibbioc") - (version "1.30.0") + (version "1.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "zlibbioc" version)) (sha256 (base32 - "1h0a2ps2rfk9azzps7p23sxj5z1giv8gcx0ypzgyz7fkr4xi9z7k")))) + "1xh7qan0w62mzsmanbx9vcj6ygdfhzw1abaxijkq7f4nh5w87idj")))) (properties `((upstream-name . "zlibbioc"))) (build-system r-build-system) @@ -8313,21 +8319,22 @@ secondary structure and comparative analysis in R.") (define-public r-rhtslib (package (name "r-rhtslib") - (version "1.16.3") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rhtslib" version)) (sha256 (base32 - "1lmrfr32nrz36abn440kvzzck53y2320xjxqzs2jw7m2a9h3ryak")))) + "04inkq44lxwymqv51mxgaphasqjcdc9rl5p58imnrdm0kszs8prm")))) (properties `((upstream-name . "Rhtslib"))) (build-system r-build-system) ;; Without this a temporary directory ends up in the Rhtslib.so binary, ;; which makes R abort the build. (arguments '(#:configure-flags '("--no-staged-install"))) (propagated-inputs - `(("r-zlibbioc" ,r-zlibbioc))) + `(("curl" ,curl) + ("r-zlibbioc" ,r-zlibbioc))) (inputs `(("zlib" ,zlib))) (native-inputs @@ -8343,14 +8350,14 @@ of other R packages who wish to make use of HTSlib.") (define-public r-bamsignals (package (name "r-bamsignals") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "bamsignals" version)) (sha256 (base32 - "15q1q51dwl9qxfkf10yppw4m194ba03nq9plsrbj8fqj00v4729i")))) + "0699b0pqbs0dvs91yjibcjc90lxj9mg8rcml4a6wchfr9md7n74w")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) @@ -8373,13 +8380,13 @@ paired-end data.") (define-public r-rcas (package (name "r-rcas") - (version "1.10.1") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "RCAS" version)) (sha256 (base32 - "06z5zmdi34jblw37z6ff8hb6lvvi0chwr37acwqfn8d27ax9lakz")))) + "1s3gvvxi1029d1vfwnjh21nnw3mlx08kcwz63891hml9y850cvsn")))) (properties `((upstream-name . "RCAS"))) (build-system r-build-system) (propagated-inputs @@ -8474,14 +8481,14 @@ library implementing most of the pipeline's features.") (define-public r-mutationalpatterns (package (name "r-mutationalpatterns") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "MutationalPatterns" version)) (sha256 (base32 - "1k3r06xj1nim1s8as1i7fykfa6fbb4x456kslbzdvbf83ppx34z3")))) + "08715l6swrlccviw7932v5hyrd2x4c6049vy9qnxk0lw3sp1zvsf")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) @@ -8579,13 +8586,13 @@ factors bound at the specific regions.") (define-public r-tximport (package (name "r-tximport") - (version "1.12.3") + (version "1.14.0") (source (origin (method url-fetch) (uri (bioconductor-uri "tximport" version)) (sha256 (base32 - "070nx0blvvfhsnkbb5j899wy7dgalrh4xfcciir9l2xl67lna1zf")))) + "09r23n2812q89by0r0cz2fx1gfnmn3jb3hwbg61m52bika82pakj")))) (build-system r-build-system) (home-page "https://bioconductor.org/packages/tximport") (synopsis "Import and summarize transcript-level estimates for gene-level analysis") @@ -8601,13 +8608,13 @@ of gene-level counts.") (define-public r-rhdf5 (package (name "r-rhdf5") - (version "2.28.1") + (version "2.30.1") (source (origin (method url-fetch) (uri (bioconductor-uri "rhdf5" version)) (sha256 (base32 - "027cv1kh3xl66lrrahv2jgfmvgcwfpcj9dpgdj5fd9ybf5nyjcwb")))) + "18pv74jj4wr1981r92ss10qkgf5g1b09dsbz3im3j70a4l5l0df0")))) (build-system r-build-system) (propagated-inputs `(("r-rhdf5lib" ,r-rhdf5lib))) @@ -8628,13 +8635,13 @@ the available RAM.") (define-public r-annotationfilter (package (name "r-annotationfilter") - (version "1.8.0") + (version "1.10.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AnnotationFilter" version)) (sha256 (base32 - "15qh4jwxxqsnb308nxzj99gckfk18rhp8g26q1xwgkr57zc5kcrx")))) + "1l9sxhlvnwn6327vgg02h11ppmqr2zr07ff8wmcng0i1jbqwa8q5")))) (properties `((upstream-name . "AnnotationFilter"))) (build-system r-build-system) @@ -8933,14 +8940,14 @@ common bioinformatics tools.") (define-public r-chipseq (package (name "r-chipseq") - (version "1.34.0") + (version "1.36.0") (source (origin (method url-fetch) (uri (bioconductor-uri "chipseq" version)) (sha256 (base32 - "1835nhrxcaqpqf1kxrsk1js8bf7x33z1n3bqjvm8404091acqyma")))) + "1ln6bn08xig3j6ryak1xfkjhvpnlm2vf1czz9hlj6f02299nbs6l")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) @@ -8985,14 +8992,14 @@ GenomicRanges Bioconductor package.") (define-public r-copywriter (package (name "r-copywriter") - (version "2.16.0") + (version "2.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "CopywriteR" version)) (sha256 (base32 - "0kv3k58wyyicq1hhq7bddh0v3b2ksz6fa47skvnp8f193csza9g6")))) + "0llg1zpxg7qnvja5f5w1z1xic0jdg6zc4mfn97h2sm44skxxcyl1")))) (properties `((upstream-name . "CopywriteR"))) (build-system r-build-system) (propagated-inputs @@ -9025,13 +9032,13 @@ number detection tools.") (define-public r-methylkit (package (name "r-methylkit") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "methylKit" version)) (sha256 (base32 - "1z687vpi5kwcqpnd6r74c5y72hcsbqlwg0bk95kksgpi81q710qj")))) + "0klwc0sbmrxj1lxbz16pl39rxjm0pi57gjw547hlgnac1p9fspzy")))) (properties `((upstream-name . "methylKit"))) (build-system r-build-system) (propagated-inputs @@ -9072,14 +9079,14 @@ TAB-Seq.") (define-public r-sva (package (name "r-sva") - (version "3.32.1") + (version "3.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "sva" version)) (sha256 (base32 - "0jj6klfha5v5qmx2sjblf1an6s2zqd7mmgsp7sfmh4k2jpqi3jm9")))) + "1bzms6idx30s4nxl610zwa8rjxsyxb5pf3vxsdfmxg8j4pab9gh1")))) (build-system r-build-system) (propagated-inputs `(("r-genefilter" ,r-genefilter) @@ -9182,14 +9189,14 @@ as allowing spectra with different resolutions.") (define-public r-protgenerics (package (name "r-protgenerics") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ProtGenerics" version)) (sha256 (base32 - "12jjwmg58b4xbivxlw4pffq0qfi2c1c5hyrci0sfyphrc99fvx0i")))) + "1k1ggjgx2la8b21841a4ngkp6xfxwz0czv7x960r7i1jqif8y48z")))) (properties `((upstream-name . "ProtGenerics"))) (build-system r-build-system) (home-page "https://github.com/lgatto/ProtGenerics") @@ -9202,14 +9209,14 @@ proteomics packages.") (define-public r-mzr (package (name "r-mzr") - (version "2.18.1") + (version "2.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "mzR" version)) (sha256 (base32 - "1pr1pcrg3r3pccm5ag6l8ic6rpqbk9jnlb9mm7g4ak5jwrajbzjq")) + "1cwd7phlc5jbx6r6cznyfbdpvcin5fvsaasbbi65zn0s92a80r13")) (modules '((guix build utils))) (snippet '(begin @@ -9231,7 +9238,7 @@ proteomics packages.") #t))))) (inputs `(;; Our default boost package won't work here, unfortunately, even with - ;; mzR version 2.18.1. + ;; mzR version 2.20.0. ("boost" ,boost-for-mysql) ; use this instead of the bundled boost sources ("zlib" ,zlib))) (propagated-inputs @@ -9256,14 +9263,14 @@ previously been used in XCMS.") (define-public r-affyio (package (name "r-affyio") - (version "1.54.0") + (version "1.56.0") (source (origin (method url-fetch) (uri (bioconductor-uri "affyio" version)) (sha256 (base32 - "1s78hm51fgac3i2j4bbdy0z6g14370154s6km8lldc9zpahx8b6p")))) + "0sbkadxdlx7qzxc8z8iv90y6j9b2f62mk3i54dijjh56x3hjy3hb")))) (build-system r-build-system) (propagated-inputs `(("r-zlibbioc" ,r-zlibbioc))) @@ -9280,14 +9287,14 @@ CDF file formats.") (define-public r-affy (package (name "r-affy") - (version "1.62.0") + (version "1.64.0") (source (origin (method url-fetch) (uri (bioconductor-uri "affy" version)) (sha256 (base32 - "05vz0vf3472s1ivfhc0gc8yz98y4rvvp7cf6kfbxhy1b23im1bgk")))) + "131za66wbaz9y86gvjqcc2yd1f2ngl2b796xw726g75djhdgxgap")))) (build-system r-build-system) (propagated-inputs `(("r-affyio" ,r-affyio) @@ -9308,14 +9315,14 @@ analysis.") (define-public r-vsn (package (name "r-vsn") - (version "3.52.0") + (version "3.54.0") (source (origin (method url-fetch) (uri (bioconductor-uri "vsn" version)) (sha256 (base32 - "1vqmyxg06kgq9m3w6n0jykqm4jgsjw879r4s216wlcq4xc94dh1r")))) + "1naqzb2m0km8fzr6chf9z71sisrwviy1fdi9b3hn4i8p18b4kqzh")))) (build-system r-build-system) (propagated-inputs `(("r-affy" ,r-affy) @@ -9342,14 +9349,14 @@ and specific in detecting differential transcription.") (define-public r-mzid (package (name "r-mzid") - (version "1.22.0") + (version "1.24.0") (source (origin (method url-fetch) (uri (bioconductor-uri "mzID" version)) (sha256 (base32 - "0vnyg7jlmy7ain7gmjwhqyqr664znrvrdlh7zd63563vhb87qarn")))) + "1glcv096bn6pxlw89dlij1nzpwnjvrbxysvw2gm6qgm7rhxlaxrw")))) (properties `((upstream-name . "mzID"))) (build-system r-build-system) (propagated-inputs @@ -9372,14 +9379,14 @@ specific parser.") (define-public r-pcamethods (package (name "r-pcamethods") - (version "1.76.0") + (version "1.78.0") (source (origin (method url-fetch) (uri (bioconductor-uri "pcaMethods" version)) (sha256 (base32 - "0svf4n7l0afy4wwgs6x8x4dm330r3311l5vmsxw2f0r4axkh3bzk")))) + "1wir67kfjm0m9gf0ki8qmvh45n4gx2k0wfl9pd1hp4g62fbrj1pj")))) (properties `((upstream-name . "pcaMethods"))) (build-system r-build-system) (propagated-inputs @@ -9402,14 +9409,14 @@ structure (pcaRes) to provide a common interface to the PCA results.") (define-public r-msnbase (package (name "r-msnbase") - (version "2.10.1") + (version "2.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "MSnbase" version)) (sha256 (base32 - "0z63yqazkycq0zbbarq9ida6al35hv3g7g9g7s7bss4gh0hk7lhd")))) + "1z889xkfphqqmv31i8hh5xqyclv660ic26rfck5bjpgk3s2zzwi6")))) (properties `((upstream-name . "MSnbase"))) (build-system r-build-system) (propagated-inputs @@ -9445,14 +9452,14 @@ of mass spectrometry based proteomics data.") (define-public r-msnid (package (name "r-msnid") - (version "1.18.1") + (version "1.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "MSnID" version)) (sha256 (base32 - "1n49l5mjdz7p4g2nwsbhm1jcj42sv6lsriq77n2imvacsvk0qfmb")))) + "0m71f2y12hmwvng45kzz4r4qrgc2jbd7j9gprmw8y5laawpdaifg")))) (properties `((upstream-name . "MSnID"))) (build-system r-build-system) (propagated-inputs @@ -9484,13 +9491,13 @@ and irregular enzymatic cleavages, mass measurement accuracy, etc.") (define-public r-seurat (package (name "r-seurat") - (version "3.1.1") + (version "3.1.2") (source (origin (method url-fetch) (uri (cran-uri "Seurat" version)) (sha256 (base32 - "084lr2fjdksshsmv1ww82bgn3a9mml7kswsidjrs89snabgvn360")))) + "0m1qi39snbmkkv1p07bzg1r7snc9x6a1y0dghvpk1nzgcfpmnsj4")))) (properties `((upstream-name . "Seurat"))) (build-system r-build-system) (propagated-inputs @@ -9546,14 +9553,14 @@ discovery of differentially expressed genes and markers.") (define-public r-aroma-light (package (name "r-aroma-light") - (version "3.14.0") + (version "3.16.0") (source (origin (method url-fetch) (uri (bioconductor-uri "aroma.light" version)) (sha256 (base32 - "0a1prl4jhbqpa85i2vyia1ks9iippzl8np50fvm9wx8kbjxna5l6")))) + "0cgdg650j4dl0b45pwaw49ib97dwjazrv9sqzkygrjmcnnfxry8x")))) (properties `((upstream-name . "aroma.light"))) (build-system r-build-system) (propagated-inputs @@ -9573,14 +9580,14 @@ classes.") (define-public r-deseq (package (name "r-deseq") - (version "1.36.0") + (version "1.38.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DESeq" version)) (sha256 (base32 - "0jppqrikg9qfqcfw5qd3m5c7bag9g23bc0kcpk5zfkk1wv09mnlm")))) + "14pys93gsl50xmq5pc7pp1g20v3ywlg0yzkkhwb3kiy8573xn9nc")))) (properties `((upstream-name . "DESeq"))) (build-system r-build-system) (propagated-inputs @@ -9604,14 +9611,14 @@ distribution.") (define-public r-edaseq (package (name "r-edaseq") - (version "2.18.0") + (version "2.20.0") (source (origin (method url-fetch) (uri (bioconductor-uri "EDASeq" version)) (sha256 (base32 - "0mmc9bij17w4mfwcc566zbj5fvqgl8gfqs0qvj6ri4mbcql9jxb3")))) + "19mgzbv8yxgvw86wpq401l27q55ygawlngl775yavwccz1zbhjnj")))) (properties `((upstream-name . "EDASeq"))) (build-system r-build-system) (propagated-inputs @@ -9643,14 +9650,14 @@ global-scaling and full-quantile normalization.") (define-public r-interactivedisplaybase (package (name "r-interactivedisplaybase") - (version "1.22.0") + (version "1.24.0") (source (origin (method url-fetch) (uri (bioconductor-uri "interactiveDisplayBase" version)) (sha256 (base32 - "1kkyv7hkygacmksvld9gs3ycf6wlblqcwi11nny0hq3l0ha265v5")))) + "0zwf3ma6wf4zypl6bgjp0n72k2hmp0g16gzl4v3y4157rxcbpl0n")))) (properties `((upstream-name . "interactiveDisplayBase"))) (build-system r-build-system) @@ -9667,14 +9674,14 @@ Shiny-based display methods for Bioconductor objects.") (define-public r-annotationhub (package (name "r-annotationhub") - (version "2.16.1") + (version "2.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "AnnotationHub" version)) (sha256 (base32 - "0c773cmhng907839f0bq161jky7362lxxny36ac55qxiz1giqi8j")))) + "19vj3bk8jz68q84g3j8xs1s9bqz90lbwbciig1h45zvn2zc6087m")))) (properties `((upstream-name . "AnnotationHub"))) (build-system r-build-system) (propagated-inputs @@ -9682,6 +9689,7 @@ Shiny-based display methods for Bioconductor objects.") ("r-biocfilecache" ,r-biocfilecache) ("r-biocgenerics" ,r-biocgenerics) ("r-biocmanager" ,r-biocmanager) + ("r-biocversion" ,r-biocversion) ("r-curl" ,r-curl) ("r-dplyr" ,r-dplyr) ("r-httr" ,r-httr) @@ -9705,14 +9713,14 @@ by the user, helping with quick and reproducible access.") (define-public r-fastseg (package (name "r-fastseg") - (version "1.30.0") + (version "1.32.0") (source (origin (method url-fetch) (uri (bioconductor-uri "fastseg" version)) (sha256 (base32 - "03gggz29nf8kyy9clkifqr0xm8v0yb0kl0gjfb5c0vrjmwkfqvdf")))) + "1cys6frmbizc8bf933mwvvnr31sfya9ahcc0wm66pbd1x3mygkmk")))) (build-system r-build-system) (propagated-inputs `(("r-biobase" ,r-biobase) @@ -9735,14 +9743,14 @@ microarrays or GRanges for sequencing data.") (define-public r-keggrest (package (name "r-keggrest") - (version "1.24.1") + (version "1.26.1") (source (origin (method url-fetch) (uri (bioconductor-uri "KEGGREST" version)) (sha256 (base32 - "0yxp3iajdy61q6mjgp1nxdgmf2yb58cvqmdgab7lqxr0ky1wkfkr")))) + "1cgjvv9n88y3ah21356mh8z2l08vjn42hjy8hcljsibknzc4v247")))) (properties `((upstream-name . "KEGGREST"))) (build-system r-build-system) (propagated-inputs @@ -9759,14 +9767,14 @@ microarrays or GRanges for sequencing data.") (define-public r-gage (package (name "r-gage") - (version "2.34.0") + (version "2.36.0") (source (origin (method url-fetch) (uri (bioconductor-uri "gage" version)) (sha256 (base32 - "08d5yg7n4rx4xsginc8bx0sycpj06pi1k7i44ff757444p20srwq")))) + "1qxfmg0id19iy3ia8h5nrvk3d1azqb28kl7m08i23654wb6b45c6")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -9788,14 +9796,14 @@ analysis using other methods.") (define-public r-genomicfiles (package (name "r-genomicfiles") - (version "1.20.0") + (version "1.22.0") (source (origin (method url-fetch) (uri (bioconductor-uri "GenomicFiles" version)) (sha256 (base32 - "122g0yhpsm6fyvv38agp57clagl13h324rk06mlgb2xz104a1j4i")))) + "1x6q827ms2l5lwzha1vsgfrshh35n9f19jq57xagrqlafxgpz86s")))) (properties `((upstream-name . "GenomicFiles"))) (build-system r-build-system) (propagated-inputs @@ -9821,14 +9829,14 @@ provide added flexibility for data combination and manipulation.") (define-public r-complexheatmap (package (name "r-complexheatmap") - (version "2.0.0") + (version "2.2.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ComplexHeatmap" version)) (sha256 (base32 - "1imnb72r10csl2h12sckic7hcsb8v2z0y3dyw1ax2fpykmsmq776")))) + "1pj6a6rmqckk033pkklk6hr4066rzavamy6w194rfdhind90rk0p")))) (properties `((upstream-name . "ComplexHeatmap"))) (build-system r-build-system) @@ -9853,14 +9861,14 @@ self-defined annotation graphics.") (define-public r-dirichletmultinomial (package (name "r-dirichletmultinomial") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DirichletMultinomial" version)) (sha256 (base32 - "0qirvhnbv4wd50ln4pqbk4dj6h2935ipf9p4sw1x62qqhwxidqk4")))) + "0knmncmkkf2ypyqfcl5s8nmyyf9nrzkqprzn9w3w8182c0v49r0s")))) (properties `((upstream-name . "DirichletMultinomial"))) (build-system r-build-system) @@ -9882,14 +9890,14 @@ originally made available by Holmes, Harris, and Quince, 2012, PLoS ONE 7(2): (define-public r-ensembldb (package (name "r-ensembldb") - (version "2.8.1") + (version "2.10.2") (source (origin (method url-fetch) (uri (bioconductor-uri "ensembldb" version)) (sha256 (base32 - "103z902104ljdp6s9y2dmgrl5wkdz8vvlbbqgk8r4drkg7m3d4lj")))) + "02lnpyp85zchmz404hr5381zmihvq4x9zgxdrbn2afi352vg0vab")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -9925,14 +9933,14 @@ chromosome region or transcript models of lincRNA genes.") (define-public r-organismdbi (package (name "r-organismdbi") - (version "1.26.0") + (version "1.28.0") (source (origin (method url-fetch) (uri (bioconductor-uri "OrganismDbi" version)) (sha256 (base32 - "14azk69pmwlhza0mhsxigsg127w3mgsx9hhrbdcdqmy3vzfbfaqq")))) + "1bvfyh733mhka9zd00hrzpalgjs255c2blnxyf60ipzk5jg7yllb")))) (properties `((upstream-name . "OrganismDbi"))) (build-system r-build-system) (propagated-inputs @@ -9957,14 +9965,14 @@ the fact that each of these packages implements a select methods.") (define-public r-biovizbase (package (name "r-biovizbase") - (version "1.32.0") + (version "1.34.1") (source (origin (method url-fetch) (uri (bioconductor-uri "biovizBase" version)) (sha256 (base32 - "1lba1801ak0a4vz6f8jffp9d525q27p0dhi2bp4f68mvdwwl2994")))) + "04vvj907bgs67w8rb7n1haf80p6cd0qj5fdxw0dwryb455y35vir")))) (properties `((upstream-name . "biovizBase"))) (build-system r-build-system) (propagated-inputs @@ -9999,14 +10007,14 @@ effort and encourages consistency.") (define-public r-ggbio (package (name "r-ggbio") - (version "1.32.0") + (version "1.34.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ggbio" version)) (sha256 (base32 - "10s6hnffnrrsx3896adqdc5g55fzd5y6qhnp1mq0c641nw833rwd")))) + "13wzwh40anh8l53yp19bg4w5cpxykcaf228dc8cxvjndyib711qb")))) (build-system r-build-system) (arguments `(#:phases @@ -10086,14 +10094,14 @@ organisms via the @code{g:Profiler} toolkit.") (define-public r-gqtlbase (package (name "r-gqtlbase") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "gQTLBase" version)) (sha256 (base32 - "1n2cizb88g2ankngvhxv377gizg80y3fhlx67sgm0z4ilm6a30ql")))) + "1qr8dqjbmj1mdjbzbnxwzfrm8f02wqfsgic8ws5kv7pmsby63y4x")))) (properties `((upstream-name . "gQTLBase"))) (build-system r-build-system) (propagated-inputs @@ -10121,14 +10129,14 @@ and more.") (define-public r-snpstats (package (name "r-snpstats") - (version "1.34.0") + (version "1.36.0") (source (origin (method url-fetch) (uri (bioconductor-uri "snpStats" version)) (sha256 (base32 - "0drfd24a5pkrhzmpidlh717bgh2dm68mpn6vj1vlpkilfbkifl34")))) + "1xq1rjljg70h5mshdza56dis0iv1a20sivs6dav3w5jbdd1l5qkh")))) (properties `((upstream-name . "snpStats"))) (build-system r-build-system) (inputs `(("zlib" ,zlib))) @@ -10180,14 +10188,14 @@ several related annotation packages.") (define-public r-erma (package (name "r-erma") - (version "1.0.0") + (version "1.2.0") (source (origin (method url-fetch) (uri (bioconductor-uri "erma" version)) (sha256 (base32 - "0j7ggp63m5y88cxgi49vcql1s1avzifwvvd2hydj4lj3yrmzib48")))) + "085qsr73p8nyp435f15l4l1jkfd64bfd9gl4z496nfxdnqn95srz")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -10218,14 +10226,14 @@ by Ernst and Kellis.") (define-public r-ldblock (package (name "r-ldblock") - (version "1.14.3") + (version "1.16.0") (source (origin (method url-fetch) (uri (bioconductor-uri "ldblock" version)) (sha256 (base32 - "154yvrvs8ik7ifcny1681cmqra0i163j00k4vbvkvl701p5gsp5q")))) + "0xpigfidmylfawy6vzshqnsw1lzjs4qms8q7zffij6bkvkv7920x")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) @@ -10233,8 +10241,6 @@ by Ernst and Kellis.") ("r-ensembldb" ,r-ensembldb) ("r-genomeinfodb" ,r-genomeinfodb) ("r-genomicfiles" ,r-genomicfiles) - ("r-go-db" ,r-go-db) - ("r-homo-sapiens" ,r-homo-sapiens) ("r-httr" ,r-httr) ("r-matrix" ,r-matrix) ("r-rsamtools" ,r-rsamtools) @@ -10252,14 +10258,14 @@ defining LD blocks.") (define-public r-gqtlstats (package (name "r-gqtlstats") - (version "1.16.0") + (version "1.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "gQTLstats" version)) (sha256 (base32 - "17xadfn8qh1pwzlpcbds5wrjr9bzhsnmv90wffxmp02hq20qkrh5")))) + "1dly4p9r4231hf31xg1nzqiyvjbcfjljfmhb88ic1jxwnvniyv2f")))) (properties `((upstream-name . "gQTLstats"))) (build-system r-build-system) (propagated-inputs @@ -10306,14 +10312,14 @@ family of feature/genome hypotheses.") (define-public r-gviz (package (name "r-gviz") - (version "1.28.3") + (version "1.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Gviz" version)) (sha256 (base32 - "0347r1ly0vzpilflzbyzsjdf4cday294lw3fxzx61clblrmws1ki")))) + "1p7n4yc77272rd8ybsim3rcg6kf6wmc95pwwav40b754imxn263z")))) (properties `((upstream-name . "Gviz"))) (build-system r-build-system) (propagated-inputs @@ -10352,14 +10358,14 @@ with your data.") (define-public r-gwascat (package (name "r-gwascat") - (version "2.16.1") + (version "2.18.0") (source (origin (method url-fetch) (uri (bioconductor-uri "gwascat" version)) (sha256 (base32 - "0d4krqx8zjniwp6k2vzwqgfws39w03x51kqiwd5dks1fp05sw4xh")))) + "038vhfsk2vs7inn5di093cmjbb81k7j0af385sg7l01jj70bdqq1")))) (build-system r-build-system) (propagated-inputs `(("r-annotationdbi" ,r-annotationdbi) @@ -10383,13 +10389,13 @@ EMBL-EBI GWAS catalog.") (define-public r-sushi (package (name "r-sushi") - (version "1.22.0") + (version "1.24.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Sushi" version)) (sha256 (base32 - "1hgh3jfcx0bh3fyvp85v7435hvsk3ah1hxx5117ss93v03iwjf1g")))) + "15xng21hd09fb234ravrry3b872zg82w8x9lijxab9n96xihcpz5")))) (properties `((upstream-name . "Sushi"))) (build-system r-build-system) (propagated-inputs @@ -10405,13 +10411,13 @@ visualizations for publication-quality multi-panel figures.") (define-public r-fithic (package (name "r-fithic") - (version "1.10.0") + (version "1.12.0") (source (origin (method url-fetch) (uri (bioconductor-uri "FitHiC" version)) (sha256 (base32 - "1qrxy4v8vmykrk8y6g3bs5wh5xhbs6pxyydbxy3vnj2mjirnxr6d")))) + "1irwkwi4afdj395134k31mvx7c2vpdd0rv8zrblnldascdsb04kc")))) (properties `((upstream-name . "FitHiC"))) (build-system r-build-system) (propagated-inputs @@ -10429,13 +10435,13 @@ assays such as Hi-C.") (define-public r-hitc (package (name "r-hitc") - (version "1.28.0") + (version "1.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "HiTC" version)) (sha256 (base32 - "059a1xxv2kb0bb32flymg2s8ylhavnv3j8l4125rfidagcgxgzjq")))) + "0byahi0fz0dzjyklz8v9whax9ygg7gwb4pl1j3zbl6z8a9qx8pps")))) (properties `((upstream-name . "HiTC"))) (build-system r-build-system) (propagated-inputs @@ -10458,14 +10464,14 @@ provided.") (define-public r-hdf5array (package (name "r-hdf5array") - (version "1.12.3") + (version "1.14.1") (source (origin (method url-fetch) (uri (bioconductor-uri "HDF5Array" version)) (sha256 (base32 - "1037j6f0yyw4cf6p051810qamxi1sji5w4d0fgq5lyzyl5d36fm6")))) + "04hd02zd5jix5p2zg10asmwjg1fynqgmclbhbmk7fb6arx5hm11f")))) (properties `((upstream-name . "HDF5Array"))) (build-system r-build-system) (inputs @@ -10474,6 +10480,7 @@ provided.") `(("r-biocgenerics" ,r-biocgenerics) ("r-delayedarray" ,r-delayedarray) ("r-iranges" ,r-iranges) + ("r-matrix" ,r-matrix) ("r-rhdf5" ,r-rhdf5) ("r-rhdf5lib" ,r-rhdf5lib) ("r-s4vectors" ,r-s4vectors))) @@ -10487,14 +10494,14 @@ block processing.") (define-public r-rhdf5lib (package (name "r-rhdf5lib") - (version "1.6.3") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rhdf5lib" version)) (sha256 (base32 - "0q68n5jm7w99paibj8vkxbdksbyrxilzwc9dkp3zf8zrdc5qfxzy")) + "17lhwnm9rqsvbqkvwp0m07vjrk63a4389p2y39zffv8fgznxqzd7")) (modules '((guix build utils))) (snippet '(begin @@ -10511,10 +10518,14 @@ block processing.") (for-each delete-file '("configure" "configure.ac")) ;; Do not make other packages link with the proprietary libsz. (substitute* "R/zzz.R" - (("'%s/libhdf5_cpp.a %s/libhdf5.a %s/libsz.a -lz'") - "'%s/libhdf5_cpp.a %s/libhdf5.a %s/libhdf5.a -lz'") - (("'%s/libhdf5.a %s/libsz.a -lz'") - "'%s/libhdf5.a %s/libhdf5.a -lz'")) + (("'\"%s/libhdf5.a\" \"%s/libsz.a\" -lz'") + "'\"%s/libhdf5.a\" \"%s/libhdf5.a\" -lz'") + (("'\"%s/libhdf5_cpp.a\" \"%s/libhdf5.a\" \"%s/libsz.a\" -lz'") + "'\"%s/libhdf5_cpp.a\" \"%s/libhdf5.a\" \"%s/libhdf5.a\" -lz'") + (("'%s/libhdf5_hl.a %s/libhdf5.a %s/libsz.a -lz'") + "'%s/libhdf5_hl.a %s/libhdf5.a %s/libhdf5.a -lz'") + (("'%s/libhdf5_hl_cpp.a %s/libhdf5_hl.a %s/libhdf5_cpp.a %s/libhdf5.a %s/libsz.a -lz'") + "'%s/libhdf5_hl_cpp.a %s/libhdf5_hl.a %s/libhdf5_cpp.a %s/libhdf5.a %s/libhdf5.a -lz'")) (with-directory-excursion "src" (invoke "tar" "xvf" (assoc-ref inputs "hdf5-source")) (rename-file (string-append "hdf5-" ,(package-version hdf5-1.10)) @@ -10539,6 +10550,14 @@ block processing.") (assoc-ref inputs "hdf5") "/lib/libhdf5.a\n")) (("HDF5_CXX_INCLUDE=.*") "HDF5_CXX_INCLUDE=./hdf5/c++/src\n") (("HDF5_INCLUDE=.*") "HDF5_INCLUDE=./hdf5/src\n") + (("HDF5_HL_INCLUDE=.*") "HDF5_HL_INCLUDE=./hdf5/hl/src\n") + (("HDF5_HL_CXX_INCLUDE=.*") "HDF5_HL_CXX_INCLUDE=./hdf5/hl/c++/src\n") + (("HDF5_HL_LIB=.*") + (string-append "HDF5_HL_LIB=" + (assoc-ref inputs "hdf5") "/lib/libhdf5_hl.a\n")) + (("HDF5_HL_CXX_LIB=.*") + (string-append "HDF5_HL_CXX_LIB=" + (assoc-ref inputs "hdf5") "/lib/libhdf5_hl_cpp.a\n")) ;; szip is non-free software (("cp \"\\$\\{SZIP_LIB\\}.*") "") (("PKG_LIBS =.*") "PKG_LIBS = -lz -lhdf5\n"))) @@ -10558,18 +10577,19 @@ packages.") (define-public r-beachmat (package (name "r-beachmat") - (version "2.0.0") + (version "2.2.1") (source (origin (method url-fetch) (uri (bioconductor-uri "beachmat" version)) (sha256 (base32 - "14cz19fw97s8mhm9r2n5li44vckx069k8nqsyy64c3lkfm4vy4zx")))) + "1bpnlw2kdy9yc2vq948k980r0j25ipb80llhvn0j3kxjiwyfgs3i")))) (build-system r-build-system) (propagated-inputs `(("r-biocgenerics" ,r-biocgenerics) - ("r-delayedarray" ,r-delayedarray))) + ("r-delayedarray" ,r-delayedarray) + ("r-matrix" ,r-matrix))) (home-page "https://bioconductor.org/packages/beachmat") (synopsis "Compiling Bioconductor to handle each matrix type") (description "This package provides a consistent C++ class interface for a @@ -10580,14 +10600,14 @@ matrices.") (define-public r-singlecellexperiment (package (name "r-singlecellexperiment") - (version "1.6.0") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "SingleCellExperiment" version)) (sha256 (base32 - "0m3yjnv1njb4gyzcjfk7a0lz2vgggp2wjz382gqrb0qhhwcgfkj5")))) + "11pqb3cigi9xbhxq2k3n7z23v1ibd03ws1lcrh5c5ffgb33nlyw5")))) (properties `((upstream-name . "SingleCellExperiment"))) (build-system r-build-system) @@ -10607,13 +10627,13 @@ libraries.") (define-public r-scater (package (name "r-scater") - (version "1.12.2") + (version "1.14.6") (source (origin (method url-fetch) (uri (bioconductor-uri "scater" version)) (sha256 (base32 - "16a17161xlhh6qpna9qxph3anlc7ydgyrczmy4alfiw8si7pzmxa")))) + "0sxd1s8wdlj9926bagq4crjrk1nnmh3j3bhgrw160zfgc3y8pzck")))) (build-system r-build-system) (propagated-inputs `(("r-beachmat" ,r-beachmat) @@ -10623,7 +10643,6 @@ libraries.") ("r-biocsingular" ,r-biocsingular) ("r-delayedarray" ,r-delayedarray) ("r-delayedmatrixstats" ,r-delayedmatrixstats) - ("r-dplyr" ,r-dplyr) ("r-ggbeeswarm" ,r-ggbeeswarm) ("r-ggplot2" ,r-ggplot2) ("r-matrix" ,r-matrix) @@ -10642,14 +10661,14 @@ quality control.") (define-public r-scran (package (name "r-scran") - (version "1.12.1") + (version "1.14.5") (source (origin (method url-fetch) (uri (bioconductor-uri "scran" version)) (sha256 (base32 - "17mknpkvs7mgnlbf2hv9k7rwbx2vlg60yrwfyb8nn3nxsb6vm7yn")))) + "0ydy6gvpgpvrs4ryk1qvmmxp6cpaizs294jwg42jawxndkds1l3y")))) (build-system r-build-system) (propagated-inputs `(("r-beachmat" ,r-beachmat) @@ -10661,7 +10680,6 @@ quality control.") ("r-delayedarray" ,r-delayedarray) ("r-delayedmatrixstats" ,r-delayedmatrixstats) ("r-dqrng" ,r-dqrng) - ("r-dynamictreecut" ,r-dynamictreecut) ("r-edger" ,r-edger) ("r-igraph" ,r-igraph) ("r-limma" ,r-limma) @@ -10683,14 +10701,14 @@ variable and significantly correlated genes.") (define-public r-delayedmatrixstats (package (name "r-delayedmatrixstats") - (version "1.6.1") + (version "1.8.0") (source (origin (method url-fetch) (uri (bioconductor-uri "DelayedMatrixStats" version)) (sha256 (base32 - "1riyzfsq4bd513hidkw3cfkx3jywk3x87j89q70v459xsdfdc95b")))) + "0mv2rl6a6l404piabcazxz1s6ars016pxhjf5v40hhr6y1r0wbqy")))) (properties `((upstream-name . "DelayedMatrixStats"))) (build-system r-build-system) @@ -13272,21 +13290,23 @@ million cells.") (define-public python-bbknn (package (name "python-bbknn") - (version "1.3.1") + (version "1.3.6") (source (origin (method url-fetch) (uri (pypi-uri "bbknn" version)) (sha256 (base32 - "1qgdganvj3lyxj84v7alm23b9vqhwpn8z0115qndpnpy90qxynwz")))) + "1jbsh01f57zj4bhvjr3jh4532zznqd6nccmgrl3qi9gnhkf7c4y0")))) (build-system python-build-system) + (arguments + `(#:tests? #f)) ; TODO: Enable after migration to scikit-learn. (propagated-inputs `(("python-annoy" ,python-annoy) ("python-cython" ,python-cython) - ("python-faiss" ,python-faiss) ("python-numpy" ,python-numpy) - ("python-scanpy" ,python-scanpy))) + ("python-scipy" ,python-scipy) + ("python-umap-learn" ,python-umap-learn))) (home-page "https://github.com/Teichlab/bbknn") (synopsis "Batch balanced KNN") (description "BBKNN is a batch effect removal tool that can be directly @@ -13419,14 +13439,14 @@ bgzipped text file that contains a pair of genomic coordinates per line.") (define-public python-pyfaidx (package (name "python-pyfaidx") - (version "0.5.4.2") + (version "0.5.7") (source (origin (method url-fetch) (uri (pypi-uri "pyfaidx" version)) (sha256 (base32 - "0y5zyjksj1rdglj601xd2bbni5abhdh622y3ck76chyzxz9z4rx8")))) + "02jvdx3ksy6w5gd29i1d0g0zsabbz7c14qg482ff7pza6sdl0b2i")))) (build-system python-build-system) (propagated-inputs `(("python-six" ,python-six))) @@ -15370,3 +15390,92 @@ methylation metrics from them. MethylDackel requires an indexed fasta file containing the reference genome as well.") ;; See https://github.com/dpryan79/MethylDackel/issues/85 (license license:expat))) + +(define-public python-gffutils + ;; The latest release is older more than a year than the latest commit + (let ((commit "4034c54600813b1402945e12faa91b3a53162cf1") + (revision "1")) + (package + (name "python-gffutils") + (version (git-version "0.9" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/daler/gffutils.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1rwafjdnbir5wnk0ap06ww4lra3p5frhy7mfs03rlldgfnwxymsn")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + ;; Tests need to access the HOME directory + (setenv "HOME" "/tmp") + (invoke "nosetests" "-a" "!slow"))) + (add-after 'unpack 'make-gz-files-writable + (lambda _ + (for-each make-file-writable + (find-files "." "\\.gz")) + #t))))) + (propagated-inputs + `(("python-argcomplete" ,python-argcomplete) + ("python-argh" ,python-argh) + ("python-biopython" ,python-biopython) + ("python-pybedtools" ,python-pybedtools) + ("python-pyfaidx" ,python-pyfaidx) + ("python-simplejson" ,python-simplejson) + ("python-six" ,python-six))) + (native-inputs + `(("python-nose" , python-nose))) + (home-page "https://github.com/daler/gffutils") + (synopsis "Tool for manipulation of GFF and GTF files") + (description + "python-gffutils is a Python package for working with and manipulating +the GFF and GTF format files typically used for genomic annotations. The +files are loaded into a SQLite database, allowing much more complex +manipulation of hierarchical features (e.g., genes, transcripts, and exons) +than is possible with plain-text methods alone.") + (license license:expat)))) + +(define-public libsbml + (package + (name "libsbml") + (version "5.18.0") + (source (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/sbml/libsbml/" + version "/stable/libSBML-" + version "-core-src.tar.gz")) + (sha256 + (base32 + "0slkagrk3nfi2qsksv6b1brj6zhx4bj4bkib2sdycvrcd10ql2lh")))) + (build-system cmake-build-system) + (arguments + `(#:test-target "test" + #:configure-flags + (list "-DWITH_CHECK=ON" + (string-append "-DLIBXML_LIBRARY=" + (assoc-ref %build-inputs "libxml2") + "/lib/libxml2.so") + (string-append "-DLIBXML_INCLUDE_DIR=" + (assoc-ref %build-inputs "libxml2") + "/include/libxml2")))) + (propagated-inputs + `(("libxml2" ,libxml2))) + (native-inputs + `(("check" ,check) + ("swig" ,swig))) + (home-page "http://sbml.org/Software/libSBML") + (synopsis "Process SBML files and data streams") + (description "LibSBML is a library to help you read, write, manipulate, +translate, and validate SBML files and data streams. The @dfn{Systems Biology +Markup Language} (SBML) is an interchange format for computer models of +biological processes. SBML is useful for models of metabolism, cell +signaling, and more. It continues to be evolved and expanded by an +international community.") + (license license:lgpl2.1+))) diff --git a/gnu/packages/bittorrent.scm b/gnu/packages/bittorrent.scm index c5930fccb5..cab23b6753 100644 --- a/gnu/packages/bittorrent.scm +++ b/gnu/packages/bittorrent.scm @@ -9,7 +9,7 @@ ;;; Copyright © 2018 Fis Trivial <ybbs.daans@hotmail.com> ;;; Copyright © 2018 Nam Nguyen <namn@berkeley.edu> ;;; Copyright © 2018 Ricardo Wurmus <rekado@elephly.net> -;;; Copyright © 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm index 91d567288f..21b32a1ab1 100644 --- a/gnu/packages/bootloaders.scm +++ b/gnu/packages/bootloaders.scm @@ -29,7 +29,7 @@ (define-module (gnu packages bootloaders) #:use-module (gnu packages) #:use-module (gnu packages admin) - #:use-module ((gnu packages algebra) #:select (bc)) + #:use-module (gnu packages algebra) #:use-module (gnu packages assembly) #:use-module (gnu packages base) #:use-module (gnu packages disk) diff --git a/gnu/packages/build-tools.scm b/gnu/packages/build-tools.scm index 4e65978d99..cffe59f309 100644 --- a/gnu/packages/build-tools.scm +++ b/gnu/packages/build-tools.scm @@ -6,7 +6,7 @@ ;;; Copyright © 2018 Tomáš Čech <sleep_walker@gnu.org> ;;; Copyright © 2018 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2018 Alex Vong <alexvong1995@gmail.com> -;;; Copyright © 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2019 Jonathan Brielmaier <jonathan.brielmaier@web.de> ;;; ;;; This file is part of GNU Guix. diff --git a/gnu/packages/calendar.scm b/gnu/packages/calendar.scm index 6c60008ec7..5e7ac66260 100644 --- a/gnu/packages/calendar.scm +++ b/gnu/packages/calendar.scm @@ -155,7 +155,7 @@ able to synchronize with CalDAV servers through vdirsyncer.") (define-public remind (package (name "remind") - (version "3.1.16") + (version "3.1.17") (source (origin (method url-fetch) @@ -166,7 +166,7 @@ able to synchronize with CalDAV servers through vdirsyncer.") ".") ".tar.gz")) (sha256 - (base32 "14yavwqmimba8rdpwx3wlav9sfb0v5rcd1iyzqrs08wx07a9pdzf")))) + (base32 "0lgyc2j69aqqk4knywr8inz4fsnni0zq54dgqh7p4s6kzybc2mf9")))) (build-system gnu-build-system) (arguments '(#:tests? #f)) ; no "check" target diff --git a/gnu/packages/cdrom.scm b/gnu/packages/cdrom.scm index dcbf4c5f0b..b13b4b3a66 100644 --- a/gnu/packages/cdrom.scm +++ b/gnu/packages/cdrom.scm @@ -134,14 +134,14 @@ extraction from CDs.") (define-public libcdio-paranoia (package (name "libcdio-paranoia") - (version "10.2+2.0.0") + (version "10.2+2.0.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/libcdio/libcdio-paranoia-" version ".tar.bz2")) (sha256 (base32 - "1h8k8z9r75h3p697f77z9j1blwb6gf2d5rik6z2q6420my6c2ra5")))) + "12hfnrq7amv9qjzc92cr265m7kh0a1hpasck8cxx1gygbhqczc9k")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) (propagated-inputs `(("libcdio" ,libcdio))) diff --git a/gnu/packages/check.scm b/gnu/packages/check.scm index c0cb4ae7fd..f61e96422b 100644 --- a/gnu/packages/check.scm +++ b/gnu/packages/check.scm @@ -196,7 +196,7 @@ supervised tests.") multi-paradigm automated test framework for C++ and Objective-C.") (license license:boost1.0))) -(define-public catch-framework2 +(define-public catch-framework2-1 (package (name "catch2") (version "1.12.2") @@ -216,6 +216,28 @@ multi-paradigm automated test framework for C++ and Objective-C.") a multi-paradigm automated test framework for C++ and Objective-C.") (license license:boost1.0))) +(define-public catch-framework2 + (package + (name "catch2") + (version "2.1.2") + (home-page "https://github.com/catchorg/Catch2") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/catchorg/Catch2") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "14vcckqmbydjsg40ngi6iv999zimysh2l7fmrqj1d7xl990qz233")))) + (build-system cmake-build-system) + (inputs + `(("python" ,python-wrapper))) + (synopsis "Automated test framework for C++ and Objective-C") + (description "Catch2 stands for C++ Automated Test Cases in Headers and is +a multi-paradigm automated test framework for C++ and Objective-C.") + (license license:boost1.0))) + (define-public cmdtest (package (name "cmdtest") @@ -1962,7 +1984,15 @@ backported from Python 2.7 for Python 2.4+.") ("python-parse" ,python-parse) ("python-parse-type" ,python-parse-type))) (arguments - '(#:test-target "behave_test")) + '(#:test-target "behave_test" + #:phases + (modify-phases %standard-phases + (add-before 'check 'fix-library-loading + (lambda _ + ;; Otherwise, tests fail with no module named 'path' + (setenv "PYTHONPATH" (string-append (getenv "PYTHONPATH") ":" + (getcwd) "/tasks/_vendor")) + #t))))) (home-page "https://github.com/behave/behave") (synopsis "Python behavior-driven development") (description diff --git a/gnu/packages/chez.scm b/gnu/packages/chez.scm index 7e9f00f4c4..6f6b5a3948 100644 --- a/gnu/packages/chez.scm +++ b/gnu/packages/chez.scm @@ -2,6 +2,7 @@ ;;; Copyright © 2016 Federico Beffa <beffa@fbengineering.ch> ;;; Copyright © 2016 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017, 2019 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -31,6 +32,7 @@ #:use-module (gnu packages compression) #:use-module (gnu packages ncurses) #:use-module (gnu packages ghostscript) + #:use-module (gnu packages linux) #:use-module (gnu packages netpbm) #:use-module (gnu packages tex) #:use-module (gnu packages compression) @@ -62,7 +64,7 @@ (define-public chez-scheme (package (name "chez-scheme") - (version "9.5") + (version "9.5.2") (source (origin (method git-fetch) @@ -70,7 +72,7 @@ (url "https://github.com/cisco/ChezScheme.git") (commit (string-append "v" version)))) (sha256 - (base32 "132fal5hwiq0bqzvfhjsqr4d11cfdh1670f6286ks29xxj1c04zq")) + (base32 "1hagrqdp649n2g0wq2a9gfnz7mjcjakkw7ziplbj3db412bb7kx5")) (file-name (git-file-name name version)) (modules '((guix build utils))) (snippet @@ -92,7 +94,8 @@ `(("texlive" ,(texlive-union (list texlive-latex-oberdiek texlive-generic-epsf))) ("ghostscript" ,ghostscript) - ("netpbm" ,netpbm))) + ("netpbm" ,netpbm) + ("util-linux" ,util-linux))) (native-search-paths (list (search-path-specification (variable "CHEZSCHEMELIBDIRS") @@ -116,15 +119,6 @@ (lambda _ (substitute* "configure" (("uname -a") "uname -m")) #t)) - (add-after 'unpack 'patch-broken-documentation - (lambda _ - ;; Work around an oversight in the 9.5 release tarball that causes - ;; building the documentation to fail. This should be fixed in the - ;; next one; see <https://github.com/cisco/ChezScheme/issues/209>. - (substitute* "csug/copyright.stex" - (("\\\\INSERTREVISIONMONTHSPACEYEAR" ) - "October 2017")) ; tarball release date - #t)) ;; Adapt the custom 'configure' script. (replace 'configure (lambda* (#:key inputs outputs #:allow-other-keys) @@ -145,10 +139,11 @@ (invoke "mv" orig-name new-name))) `((,nanopass "source" "nanopass") (,stex "source" "stex"))) - ;; The Makefile wants to download and compile "zlib". We patch - ;; it to use the one from our 'zlib' package. + ;; The configure step wants to CURL all submodules as it + ;; detects a checkout without submodules. Disable curling, + ;; and manually patch the needed modules for compilation. (substitute* "configure" - (("rmdir zlib .*$") "echo \"using system zlib\"\n")) + (("! -f '") "-d '")) ; working around CURL. (substitute* (find-files "./c" "Mf-[a-zA-Z0-9.]+") (("\\$\\{Kernel\\}: \\$\\{kernelobj\\} \\.\\./zlib/libz\\.a") "${Kernel}: ${kernelobj}") @@ -225,7 +220,7 @@ ;; Cross-compiling for the Raspberry Pi is supported, but not native ARM. (supported-systems (fold delete %supported-systems '("mips64el-linux" "armhf-linux"))) - (home-page "http://www.scheme.com") + (home-page "https://cisco.github.io/ChezScheme/") (synopsis "R6RS Scheme compiler and run-time") (description "Chez Scheme is a compiler and run-time system for the language of the diff --git a/gnu/packages/commencement.scm b/gnu/packages/commencement.scm index 5618062a22..973e57c154 100644 --- a/gnu/packages/commencement.scm +++ b/gnu/packages/commencement.scm @@ -2585,4 +2585,17 @@ an d binaries, plus debugging symbols in the @code{debug} output), and Binutils (define-public gcc-toolchain-9 (make-gcc-toolchain gcc-9)) +;; Provide the Fortran toolchain package only for the version of gfortran that +;; is used by Guix internally to build Fortran libraries, because combining +;; code compiled with different versions can cause problems. + +(define-public gfortran-toolchain + (package (inherit (make-gcc-toolchain gfortran)) + (synopsis "Complete GCC tool chain for Fortran development") + (description "This package provides a complete GCC tool chain for +Fortran development to be installed in user profiles. This includes +gfortran, as well as libc (headers and binaries, plus debugging symbols +in the @code{debug} output), and binutils."))) + + ;;; commencement.scm ends here diff --git a/gnu/packages/compression.scm b/gnu/packages/compression.scm index df42c474d9..888401125b 100644 --- a/gnu/packages/compression.scm +++ b/gnu/packages/compression.scm @@ -779,7 +779,7 @@ time for compression ratio.") (define-public squashfs-tools (package (name "squashfs-tools") - (version "4.3") + (version "4.4") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/squashfs/squashfs/" @@ -787,10 +787,10 @@ time for compression ratio.") "squashfs" version ".tar.gz")) (sha256 (base32 - "1xpklm0y43nd9i6jw43y2xh5zvlmj9ar2rvknh0bh7kv8c95aq0d")))) + "0zmhvczscqz0mzh4b9m8m42asq14db0a6lc8clp5ljq5ybrv70d9")))) (build-system gnu-build-system) (arguments - '(#:tests? #f ; no check target + '(#:tests? #f ; no check target #:make-flags (list "CC=gcc" "XZ_SUPPORT=1" @@ -802,13 +802,6 @@ time for compression ratio.") (replace 'configure (lambda _ (chdir "squashfs-tools") - #t)) - (add-after 'unpack 'fix-glibc-compatability - (lambda _ - (substitute* '("squashfs-tools/mksquashfs.c" - "squashfs-tools/unsquashfs.c") - (("<sys/sysinfo.h>") - "<sys/sysinfo.h>\n#include <sys/sysmacros.h>")) #t))))) (inputs `(("lz4" ,lz4) @@ -826,23 +819,6 @@ systems where low overhead is needed. This package allows you to create and extract such file systems.") (license license:gpl2+))) -;; We need this for building squashfs images with symlinks. -(define-public squashfs-tools-next - (let ((commit "fb33dfc32b131a1162dcf0e35bd88254ae10e265") - (revision "1")) - (package (inherit squashfs-tools) - (name "squashfs-tools-next") - (version (string-append "4.3-" revision (string-take commit 7))) - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/plougher/squashfs-tools.git") - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "1x2skf8hxzfch978nzx5mh46d4hhi6gl22270hiarjszsjk3bnsx"))))))) - (define-public pigz (package (name "pigz") diff --git a/gnu/packages/compton.scm b/gnu/packages/compton.scm index c5b4c4ef5f..9183348819 100644 --- a/gnu/packages/compton.scm +++ b/gnu/packages/compton.scm @@ -1,6 +1,8 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2017 José Miguel Sánchez García <jmi2k@openmailbox.org> ;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2019 Alexandru-Sergiu Marton <brown121407@member.fsf.org> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -22,10 +24,15 @@ #:use-module (guix packages) #:use-module (guix git-download) #:use-module (guix build-system gnu) + #:use-module (guix build-system meson) + #:use-module (gnu packages datastructures) #:use-module (gnu packages docbook) #:use-module (gnu packages documentation) + #:use-module (gnu packages freedesktop) #:use-module (gnu packages gl) #:use-module (gnu packages glib) + #:use-module (gnu packages libevent) + #:use-module (gnu packages pcre) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) #:use-module (gnu packages textutils) @@ -103,3 +110,50 @@ performance). @item Some more options... @end itemize\n") (license license:expat)))) + +(define-public picom + (package + (name "picom") + (version "7.5") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/yshui/picom.git") + (commit (string-append "v" version)))) + (sha256 + (base32 + "1l48fxl04vkzr4r94sl37nbbw7a621rn8sxmkbdv4252i1gjxd4z")) + (file-name (string-append "picom-" version)))) + (build-system meson-build-system) + (inputs + `(("dbus" ,dbus) + ("libconfig" ,libconfig) + ("libx11" ,libx11) + ("libxext" ,libxext) + ("libev" ,libev) + ("mesa" ,mesa) + ("xprop" ,xprop) + ("xcb-util-renderutil" ,xcb-util-renderutil) + ("xcb-util-image" ,xcb-util-image) + ("pixman" ,pixman) + ("uthash" ,uthash) + ("libxdg-basedir" ,libxdg-basedir) + ("pcre" ,pcre))) + (native-inputs + `(("asciidoc" ,asciidoc) + ("pkg-config" ,pkg-config) + ("xorgproto" ,xorgproto))) + (arguments + `(#:build-type "release" + #:configure-flags '("-Dbuild_docs=true"))) + (home-page "https://github.com/yshui/picom") + (synopsis "Compositor for X11, forked from Compton") + (description + "Picom is a standalone compositor for Xorg, suitable for use +with window managers that do not provide compositing. + +Picom is a fork of compton, which is a fork of xcompmgr-dana, +which in turn is a fork of xcompmgr.") + (license (list license:expat ; The original compton license. + license:mpl2.0)))) ; License used by new picom files. diff --git a/gnu/packages/connman.scm b/gnu/packages/connman.scm index 1185561bc4..0098cb8dc7 100644 --- a/gnu/packages/connman.scm +++ b/gnu/packages/connman.scm @@ -137,7 +137,7 @@ sharing) to clients via USB, ethernet, WiFi, cellular and Bluetooth.") (define-public cmst (package (name "cmst") - (version "2017.09.19") + (version "2019.01.13") (source (origin (method url-fetch) @@ -145,7 +145,7 @@ sharing) to clients via USB, ethernet, WiFi, cellular and Bluetooth.") "https://github.com/andrew-bibb/cmst/releases/download/cmst-" version "/cmst-" version ".tar.xz")) (sha256 - (base32 "0dh4639n3l8a19svaagib41hdq5q7x70bnc28dmnwy4jflf38yrm")))) + (base32 "1cn6xz2rpkf5kx5d6p2x2lh85zppjacp59l6gj3n6x12p90al1vl")))) (inputs `(("qtbase" ,qtbase))) (native-inputs diff --git a/gnu/packages/coq.scm b/gnu/packages/coq.scm index 75b9831d39..7b2cdfec5d 100644 --- a/gnu/packages/coq.scm +++ b/gnu/packages/coq.scm @@ -58,6 +58,7 @@ (variable "COQPATH") (files (list "lib/coq/user-contrib"))))) (build-system ocaml-build-system) + (outputs '("out" "ide")) (inputs `(("lablgtk" ,lablgtk) ("python" ,python-2) @@ -72,6 +73,13 @@ (lambda _ (for-each make-file-writable (find-files ".")) #t)) + (add-after 'unpack 'remove-lablgtk-references + (lambda _ + ;; This is not used anywhere, but creates a reference to lablgtk in + ;; every binary + (substitute* '("config/coq_config.mli" "configure.ml") + ((".*coqideincl.*") "")) + #t)) (replace 'configure (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) @@ -88,6 +96,23 @@ "-j" (number->string (parallel-job-count)) "world"))) (delete 'check) + (add-after 'install 'remove-duplicate + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin"))) + ;; These are exact copies of the version without the .opt suffix. + ;; Remove them to save 35 MiB in the result + (delete-file (string-append bin "/coqtop.opt")) + (delete-file (string-append bin "/coqidetop.opt"))) + #t)) + (add-after 'install 'install-ide + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (ide (assoc-ref outputs "ide"))) + (mkdir-p (string-append ide "/bin")) + (rename-file (string-append out "/bin/coqide") + (string-append ide "/bin/coqide"))) + #t)) (add-after 'install 'check (lambda _ (with-directory-excursion "test-suite" diff --git a/gnu/packages/cpp.scm b/gnu/packages/cpp.scm index 335f9a65cd..ae1e3e3356 100644 --- a/gnu/packages/cpp.scm +++ b/gnu/packages/cpp.scm @@ -185,7 +185,7 @@ batches.") (modules '((guix build utils))) (snippet '(delete-file-recursively "./test/thirdparty")))) (native-inputs - `(("catch2" ,catch-framework2))) + `(("catch2" ,catch-framework2-1))) (build-system cmake-build-system) (arguments `(#:phases diff --git a/gnu/packages/cran.scm b/gnu/packages/cran.scm index ad8c6ebe67..dbc2b4614d 100644 --- a/gnu/packages/cran.scm +++ b/gnu/packages/cran.scm @@ -15,7 +15,7 @@ ;;; Copyright © 2018 Leo Famulari <leo@famulari.name> ;;; Copyright © 2018 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2018 Eric Brown <brown@fastmail.com> -;;; Copyright © 2018, 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2018, 2019 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2019 Nicolò Balzarotti <anothersms@gmail.com> ;;; Copyright © 2019 Wiktor Żelazny <wzelazny@vurv.cz> ;;; @@ -73,6 +73,7 @@ #:use-module (gnu packages python) #:use-module (gnu packages python-xyz) #:use-module (gnu packages statistics) + #:use-module (gnu packages tcl) #:use-module (gnu packages tls) #:use-module (gnu packages web) #:use-module (gnu packages xorg)) @@ -729,10 +730,34 @@ objects in HTML format.") and vice-versa.") (license license:gpl2+))) +(define-public r-fastmap + (package + (name "r-fastmap") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "fastmap" version)) + (sha256 + (base32 + "1v7sp56xiha0bh78g3w92k52p9vkp7ryzpw0z66nyddxzrfv0y27")))) + (properties `((upstream-name . "fastmap"))) + (build-system r-build-system) + (home-page "https://r-lib.github.io/fastmap/") + (synopsis "Fast implementation of a key-value store") + (description + "This package provides a fast implementation of a key-value store. +Environments are commonly used as key-value stores, but every time a new key +is used, it is added to R's global symbol table, causing a small amount of +memory leakage. This can be problematic in cases where many different keys +are used. Fastmap avoids this memory leak issue by implementing the map using +data structures in C++.") + (license license:expat))) + (define-public r-shiny (package (name "r-shiny") - (version "1.2.0") + (version "1.4.0") (source (origin (method git-fetch) @@ -742,7 +767,7 @@ and vice-versa.") (file-name (git-file-name name version)) (sha256 (base32 - "1kl3dh68h4cnrm3rqn9pddk5n6bsmr5x0626bkfv0qqi0q92zin4")))) + "17ac48g414h9dhi0k4wrah4gyik0q5r0xw3kc01c02qfjwimqsx7")))) (build-system r-build-system) (arguments `(#:modules ((guix build r-build-system) @@ -771,7 +796,7 @@ and vice-versa.") "/share/javascript/html5shiv.min.js")) (replace-file "json2-min.js" (string-append (assoc-ref inputs "js-json2") - "/share/javascript/json2.min.js")) + "/share/javascript/json2-min.js")) (replace-file "strftime/strftime-min.js" (string-append (assoc-ref inputs "js-strftime") "/share/javascript/strftime.min.js")) @@ -802,10 +827,15 @@ and vice-versa.") ("shiny.js" . "shiny.min.js") ("jquery.js" . - "jquery.min.js"))))) + "jquery.min.js") + ("legacy/jquery.js" . + "legacy/jquery.min.js") + ("showdown/src/showdown.js" . + "showdown/compressed/showdown.js"))))) #t))))) (propagated-inputs `(("r-crayon" ,r-crayon) + ("r-fastmap" ,r-fastmap) ("r-httpuv" ,r-httpuv) ("r-mime" ,r-mime) ("r-jsonlite" ,r-jsonlite) @@ -1262,14 +1292,14 @@ coordinates.") (define-public r-rgooglemaps (package (name "r-rgooglemaps") - (version "1.4.4") + (version "1.4.5") (source (origin (method url-fetch) (uri (cran-uri "RgoogleMaps" version)) (sha256 (base32 - "0sbklacc4jl5524ixhc11mh6smrzdz4l9pji6cn402i6zdn9z05x")))) + "1acf0qc9597apcidjzrpvwhg9ihypr38jigc10jvqn33qbn1i9s7")))) (properties `((upstream-name . "RgoogleMaps"))) (build-system r-build-system) (propagated-inputs `(("r-png" ,r-png))) @@ -1394,13 +1424,13 @@ embedded @url{https://github.com/WizardMac/ReadStat,ReadStat} C library.") (define-public r-amap (package (name "r-amap") - (version "0.8-17") + (version "0.8-18") (source (origin (method url-fetch) (uri (cran-uri "amap" version)) (sha256 (base32 - "1il94bkhl8192vawq4gr2gwyhqhid27jr2312rhvr72ssg8p713b")))) + "0zpcb73w413na23f6giml9311jh0j0y766w2fh9i40d2h7bbvyvs")))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -2331,21 +2361,44 @@ and S4 methods with inlined C, C++ or Fortran code supporting @code{.C} and ;; Any version of the LGPL. (license license:lgpl3+))) +(define-public r-bdsmatrix + (package + (name "r-bdsmatrix") + (version "1.3-3") + (source + (origin + (method url-fetch) + (uri (cran-uri "bdsmatrix" version)) + (sha256 + (base32 + "17ddvz4gnih7rx0lr1gzk280xyh6x796cf2x794dvplpiiq83skh")))) + (properties `((upstream-name . "bdsmatrix"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/bdsmatrix/") + (synopsis "Routines for block diagonal symmetric matrices") + (description + "This package provides procedures to work with block diagonal symmetric +matrices, a special case of sparse matrices.") + (license license:lgpl2.0))) + (define-public r-bbmle (package (name "r-bbmle") - (version "1.0.20") + (version "1.0.22") (source (origin (method url-fetch) (uri (cran-uri "bbmle" version)) (sha256 (base32 - "1xzij7swrrzl5ly8l3lw6awh486zcm00251dwqws1y23fbgyh3vc")))) + "1idn55w5f3iw4r0ydyww8xyinninw07sxlwfqb565vmdrs87dwl4")))) (build-system r-build-system) (propagated-inputs - `(("r-lattice" ,r-lattice) + `(("r-bdsmatrix" ,r-bdsmatrix) + ("r-lattice" ,r-lattice) ("r-mass" ,r-mass) + ("r-matrix" ,r-matrix) + ("r-mvtnorm" ,r-mvtnorm) ("r-numderiv" ,r-numderiv))) (home-page "https://cran.r-project.org/web/packages/bbmle") (synopsis "Tools for General Maximum Likelihood Estimation") @@ -2747,14 +2800,14 @@ dimensioned arrays.") (define-public r-rmysql (package (name "r-rmysql") - (version "0.10.17") + (version "0.10.18") (source (origin (method url-fetch) (uri (cran-uri "RMySQL" version)) (sha256 (base32 - "1xamf99ih44dvaxg5x4ivj0hkqssmabgqd7gh8b8q1srw7yg8kbm")))) + "0r4626sk78fhlgivr0c7mwg9mj29ayr0iz5x90rdl4d5nc2r6kq4")))) (properties `((upstream-name . "RMySQL"))) (build-system r-build-system) (inputs @@ -2961,14 +3014,14 @@ problems as well as resampling based estimators of prediction error.") (define-public r-psych (package (name "r-psych") - (version "1.8.12") + (version "1.9.12") (source (origin (method url-fetch) (uri (cran-uri "psych" version)) (sha256 (base32 - "0hvp0dkkkn0szaf5rkirr3kb8qmr4bxwl775m5wmpvn1kc25w5vf")))) + "13r7fyjsl93m121awnwfhya8a0lw0l2byn60yqdbf9gp3lmb9ny0")))) (build-system r-build-system) (propagated-inputs `(("r-foreign" ,r-foreign) @@ -3015,14 +3068,14 @@ by base R methods related to model fitting.") (define-public r-broom (package (name "r-broom") - (version "0.5.2") + (version "0.5.3") (source (origin (method url-fetch) (uri (cran-uri "broom" version)) (sha256 (base32 - "0qmclih5dm5sqzy4hplcfy677kr12pm9pnpv3r319g14dd27pbqn")))) + "177m249dxbf9pf249610qrl58v025ws41ipfihy66751pwsv2n8d")))) (build-system r-build-system) (propagated-inputs `(("r-backports" ,r-backports) @@ -3050,14 +3103,14 @@ provides a one-row summary of model-level statistics.") (define-public r-recipes (package (name "r-recipes") - (version "0.1.7") + (version "0.1.8") (source (origin (method url-fetch) (uri (cran-uri "recipes" version)) (sha256 (base32 - "1gw8x7vqj7k18mfpiqinyfwzv9i5r0pb51k7xcfxsjap6m9nks98")))) + "1n32qc2a3n9cykm8dv9qcr77kdhqfsjiqf6kgfk9s0lnpx2zaldm")))) (build-system r-build-system) (propagated-inputs `(("r-dplyr" ,r-dplyr) @@ -3206,14 +3259,14 @@ with the package @code{optim}.") (define-public r-ordinal (package (name "r-ordinal") - (version "2019.4-25") + (version "2019.12-10") (source (origin (method url-fetch) (uri (cran-uri "ordinal" version)) (sha256 (base32 - "1pvrkly4x12w32n7w1qljdwzqnlkv7rfa7rx0nz5vbiw29xas4i8")))) + "09bpmjmbf4x82kgf6bm4bkncq2apdv9mk20zj4zgma2jx2vyfhbs")))) (build-system r-build-system) (propagated-inputs `(("r-mass" ,r-mass) @@ -3306,14 +3359,14 @@ analysis of multiply imputed data sets.") (define-public r-mice (package (name "r-mice") - (version "3.6.0") + (version "3.7.0") (source (origin (method url-fetch) (uri (cran-uri "mice" version)) (sha256 (base32 - "0pgcxdmp77604h6f4x8hhs6j4xdjgf5b9zvnixyzdj8vcgdjpivv")))) + "1wx1s1gc07iz63w4m8z0i1n5mc273f89grp5d3hfla7ypicjkasf")))) (build-system r-build-system) (propagated-inputs `(("r-broom" ,r-broom) @@ -3769,14 +3822,14 @@ rules, boxes, trees, and Unicode symbols with ASCII alternatives.") (define-public r-argparser (package (name "r-argparser") - (version "0.4") + (version "0.6") (source (origin (method url-fetch) (uri (cran-uri "argparser" version)) (sha256 (base32 - "0s1wxshx4jk69wfxhycx973q6y8cmqrfymyjklhq1i8xrj0kmmx9")))) + "1pxiz9jlhlnpzqn1lz349r07i7glw708w202x6dlnxp112fg7k4x")))) (build-system r-build-system) (home-page "https://bitbucket.org/djhshih/argparser") (synopsis "Command-line argument parser") @@ -4017,14 +4070,14 @@ to variables on the left-hand side of the assignment.") (define-public r-vctrs (package (name "r-vctrs") - (version "0.2.0") + (version "0.2.1") (source (origin (method url-fetch) (uri (cran-uri "vctrs" version)) (sha256 (base32 - "05h0y8qzwc899qj84gkhg4jwzscd065as00d4d8smv42h4i8zkjv")))) + "0rlwjfvvhv3s5mj4lqhwlqwddpizyp46i1qbcvw0mzb5q8b0nkz0")))) (build-system r-build-system) (propagated-inputs `(("r-backports" ,r-backports) @@ -4056,14 +4109,14 @@ to variables on the left-hand side of the assignment.") (define-public r-pillar (package (name "r-pillar") - (version "1.4.2") + (version "1.4.3") (source (origin (method url-fetch) (uri (cran-uri "pillar" version)) (sha256 (base32 - "0988047mf0xdhdkqqmavzx4ifjhndjnxniyrrhrdq1nvnrvbpfms")))) + "02sn7zw80wq33jgxk2i6m5jb83sk7y72dfhgyy0apfinv05w92ss")))) (build-system r-build-system) (propagated-inputs `(("r-cli" ,r-cli) @@ -4102,14 +4155,14 @@ terminals.") (define-public r-tinytex (package (name "r-tinytex") - (version "0.17") + (version "0.18") (source (origin (method url-fetch) (uri (cran-uri "tinytex" version)) (sha256 (base32 - "0mgxrbj4gam2gvxfk26nq820vsfjggj81m2l7j9m8vp361k15r0w")))) + "04mpbhadixbxmnazj0q6cj973cajchscvyh1k6a5b3qk26dp5krr")))) (build-system r-build-system) (propagated-inputs `(("r-xfun" ,r-xfun))) @@ -4195,14 +4248,14 @@ detect possible inconsistencies.") (define-public r-sna (package (name "r-sna") - (version "2.4") + (version "2.5") (source (origin (method url-fetch) (uri (cran-uri "sna" version)) (sha256 (base32 - "1ks8819qvpdfansfqj9p32s1rhvl26frvbi78m4rx1wd1qcv74i2")))) + "1j3i6300m686qqfmyvadim377cd3mplzgj6mandygw8brg50id8k")))) (build-system r-build-system) (propagated-inputs `(("r-network" ,r-network) @@ -4248,14 +4301,14 @@ of these tests are also included.") (define-public r-ttr (package (name "r-ttr") - (version "0.23-5") + (version "0.23-6") (source (origin (method url-fetch) (uri (cran-uri "TTR" version)) (sha256 (base32 - "0fxipnyxaz55n4camrk9cs71x9w4dsmjrihysv8i1s6khf825rg6")))) + "0rg22ma3x07s9djlxscfw5jcq1gbir05cwhgvwfi53x1sf4hmhdg")))) (properties `((upstream-name . "TTR"))) (build-system r-build-system) (propagated-inputs @@ -5598,14 +5651,14 @@ Python's @url{https://github.com/ActiveState/appdirs,Appdirs} to R.") (define-public r-renv (package (name "r-renv") - (version "0.9.1") + (version "0.9.2") (source (origin (method url-fetch) (uri (cran-uri "renv" version)) (sha256 (base32 - "0mwqpcay6v1hnvhggsrn1chvdlhi9hwvsswas8ysygfy5wxxz1sm")))) + "1jwnabryn77s29ybwdfzlnd7c8m05xmi69kp5qbvdxy2gjwjzcdr")))) (properties `((upstream-name . "renv"))) (build-system r-build-system) (home-page "https://rstudio.github.io/renv") @@ -5691,18 +5744,19 @@ obtain a better initial configuration in non-metric MDS.") (define-public r-reticulate (package (name "r-reticulate") - (version "1.13") + (version "1.14") (source (origin (method url-fetch) (uri (cran-uri "reticulate" version)) (sha256 (base32 - "1qwxh7zq9igl7dxl5g5qjbvv0mlac3w80djnkm0w8rxnaval3gmd")))) + "0icb9zl9zlx75njv7y1dr450k0yw2n3q2jkr4nicnphdyfn69gkn")))) (build-system r-build-system) (inputs `(("python" ,python))) (propagated-inputs - `(("r-jsonlite" ,r-jsonlite) + `(("r-rappdirs" ,r-rappdirs) + ("r-jsonlite" ,r-jsonlite) ("r-matrix" ,r-matrix) ("r-rcpp" ,r-rcpp))) (home-page "https://github.com/rstudio/reticulate") @@ -5717,14 +5771,14 @@ Python to R they are converted back to R types.") (define-public r-bibtex (package (name "r-bibtex") - (version "0.4.2") + (version "0.4.2.1") (source (origin (method url-fetch) (uri (cran-uri "bibtex" version)) (sha256 (base32 - "0wl3925ryd54g1nv3ncwllc493d39dpgy5md61940h69c0van1hz")))) + "1ks1w59ldwmfd1sj8ap7smyhf8dhykv7xnwrl8z9xzkcfpv1rbc0")))) (build-system r-build-system) (propagated-inputs `(("r-stringr" ,r-stringr))) (home-page "https://github.com/romainfrancois/bibtex") @@ -6118,14 +6172,14 @@ hierarchical models using Markov Chain Monte Carlo (MCMC) simulation.") (define-public r-rdpack (package (name "r-rdpack") - (version "0.11-0") + (version "0.11-1") (source (origin (method url-fetch) (uri (cran-uri "Rdpack" version)) (sha256 (base32 - "11cd27s6zp5cxnwxcvz6rjf00y0r7aq8ywhzwpf1r4xy1z44kd4g")))) + "080y15p2hl4jsq91ak2f1y2kx1iqq5c5wzyx3zyhjwp01cahy0jq")))) (properties `((upstream-name . "Rdpack"))) (build-system r-build-system) (propagated-inputs @@ -6686,14 +6740,14 @@ Group (Non-)Overlap considerations.") (define-public r-deriv (package (name "r-deriv") - (version "3.9.0") + (version "4.0") (source (origin (method url-fetch) (uri (cran-uri "Deriv" version)) (sha256 (base32 - "0hlqm216bg3l79gq6m0am0xz6vd3l2hgjnjm6lym3mkmgkka4kxw")))) + "03mlfy8jzzzbh2l18gnmw0a71n9savx4cw72yhkxq93v2xj8fy3n")))) (properties `((upstream-name . "Deriv"))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/Deriv") @@ -6841,14 +6895,14 @@ bootstrap. Confidence intervals can be computed for (p)AUC or ROC curves.") (define-public r-rootsolve (package (name "r-rootsolve") - (version "1.8.1") + (version "1.8.2") (source (origin (method url-fetch) (uri (cran-uri "rootSolve" version)) (sha256 (base32 - "0skrspq7sd7gaq73w91km14v8znc8chncgy64hvjgcng2xw15phx")))) + "0rj7c4zcrzgz7sb0vgvh7swpfafnw4040cxp7ypas3s8fnihn54l")))) (properties `((upstream-name . "rootSolve"))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -6899,13 +6953,13 @@ the analyzed items.") (define-public r-slam (package (name "r-slam") - (version "0.1-46") + (version "0.1-47") (source (origin (method url-fetch) (uri (cran-uri "slam" version)) (sha256 - (base32 "1ihhbx76miwys35gsbhijriadvrw4f51lc3v45pnn6cvcfd9hr0b")))) + (base32 "12fggw2c7hz3bpvsaqm24g3r6lbpq6jgli24g7x5j859iak5cqv9")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/slam/") (synopsis "Sparse lightweight arrays and matrices") @@ -7821,16 +7875,68 @@ analysis.") ;; Either version of the GPL. (license (list license:gpl2 license:gpl3)))) +(define-public r-gee + (package + (name "r-gee") + (version "4.13-20") + (source + (origin + (method url-fetch) + (uri (cran-uri "gee" version)) + (sha256 + (base32 + "167pzgnmj4cjc41ykps1mfwi6s7y32zxyycn5z17vn4v0pp4q0ak")))) + (properties `((upstream-name . "gee"))) + (build-system r-build-system) + (native-inputs + `(("gfortran" ,gfortran))) + (home-page "https://cran.r-project.org/web/packages/gee/") + (synopsis "Generalized estimation equation solver") + (description + "This package provides a solver for generalized estimation equations.") + (license license:gpl2))) + +(define-public r-tab + (package + (name "r-tab") + (version "4.1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "tab" version)) + (sha256 + (base32 + "0ds8n6gncidb66in7hlqkcmil5yfsf7ihqvmls789hrm2iz9xlfm")))) + (properties `((upstream-name . "tab"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-gee" ,r-gee) + ("r-knitr" ,r-knitr) + ("r-mass" ,r-mass) + ("r-survey" ,r-survey) + ("r-survival" ,r-survival) + ("r-xtable" ,r-xtable))) + (home-page "https://cran.r-project.org/web/packages/tab/") + (synopsis "Create summary tables for statistical reports") + (description + "This package contains functions for creating various types of summary +tables, e.g. comparing characteristics across levels of a categorical variable +and summarizing fitted generalized linear models, generalized estimating +equations, and Cox proportional hazards models. Functions are available to +handle data from simple random samples as well as complex surveys.") + (license license:gpl3+))) + (define-public r-dvmisc (package (name "r-dvmisc") - (version "1.1.3") + (version "1.1.4") (source (origin (method url-fetch) (uri (cran-uri "dvmisc" version)) (sha256 - (base32 "0x391pxg5mqgp5xxc8qwhwxky8ds7d9gr9iwmsb12c92kxfk00bv")))) + (base32 "01v6sixx0f3nrn6ymfifb3pvd2msfrwm21kmdv38laxq29vc4rsi")))) (build-system r-build-system) (propagated-inputs `(("r-cubature" ,r-cubature) @@ -7840,10 +7946,10 @@ analysis.") ("r-mass" ,r-mass) ("r-mvtnorm" ,r-mvtnorm) ("r-pracma" ,r-pracma) - ("r-purrr" ,r-purrr) ("r-rbenchmark" ,r-rbenchmark) ("r-rcpp" ,r-rcpp) - ("r-survey" ,r-survey))) + ("r-survey" ,r-survey) + ("r-tab" ,r-tab))) (home-page "https://cran.r-project.org/web/packages/dvmisc/") (synopsis "Faster computation of common statistics and miscellaneous functions") (description @@ -8118,14 +8224,14 @@ packages maintained by Torsten Hothorn.") (define-public r-multcomp (package (name "r-multcomp") - (version "1.4-10") + (version "1.4-11") (source (origin (method url-fetch) (uri (cran-uri "multcomp" version)) (sha256 (base32 - "1kzmdn9jmz5bmhf3wsfr12ljbasmwsgcsfdia52k0bi6q0swdg19")))) + "0jw9661hs4396wz9vflk3rak0ryzj1cg2pnndsn1gb4fjyf2vlhb")))) (build-system r-build-system) (propagated-inputs `(("r-codetools" ,r-codetools) @@ -8403,14 +8509,14 @@ ROPE percentage and pd).") (define-public r-performance (package (name "r-performance") - (version "0.4.0") + (version "0.4.2") (source (origin (method url-fetch) (uri (cran-uri "performance" version)) (sha256 (base32 - "0lxpmp9smn5r3xvfik36nr608wcpmmximjh0v2sckyvjf7hnb4s0")))) + "1pcjmqqm178dvdcpzkv5p4sj7glsppcny7znljb2nqkxh539a59p")))) (build-system r-build-system) (propagated-inputs `(("r-bayestestr" ,r-bayestestr) @@ -8430,22 +8536,20 @@ effects models and Bayesian models.") (define-public r-ggeffects (package (name "r-ggeffects") - (version "0.13.0") + (version "0.14.0") (source (origin (method url-fetch) (uri (cran-uri "ggeffects" version)) (sha256 (base32 - "0ryfbaav0k874kbwmhbiv7fan93dmkpaimm1iw5kryjhhs3917lb")))) + "1djz82xww86h8f33m2vm40lliicppgyhm6hyn3h6rzrqjrlrsmdw")))) (build-system r-build-system) (propagated-inputs - `(("r-dplyr" ,r-dplyr) - ("r-insight" ,r-insight) + `(("r-insight" ,r-insight) ("r-magrittr" ,r-magrittr) ("r-mass" ,r-mass) ("r-purrr" ,r-purrr) - ("r-rlang" ,r-rlang) ("r-sjlabelled" ,r-sjlabelled) ("r-sjmisc" ,r-sjmisc))) (home-page "https://github.com/strengejacke/ggeffects") @@ -9011,14 +9115,14 @@ experiments using ANOVA or mixed models.") (define-public r-lmertest (package (name "r-lmertest") - (version "3.1-0") + (version "3.1-1") (source (origin (method url-fetch) (uri (cran-uri "lmerTest" version)) (sha256 (base32 - "1nkz8cmxa5yb8q4i65bmhnn5pd4bhwcyjplyscynb24z3f64xp9b")))) + "0r2vvs3nl6p8xla3gd943khb4ixp0alvspqpnz2y6n3wk8zgh3jj")))) (properties `((upstream-name . "lmerTest"))) (build-system r-build-system) (propagated-inputs @@ -9456,14 +9560,14 @@ for evolution along a phylogenetic tree.") (define-public r-fmsb (package (name "r-fmsb") - (version "0.6.3") + (version "0.7.0") (source (origin (method url-fetch) (uri (cran-uri "fmsb" version)) (sha256 (base32 - "1n29bnyp20pvpk2lsa9fblsj5w7amp14snc74pk5w3yr5y6rj0s5")))) + "0x1wkzfdvv4s5xmr0whcwjz4aac71gacwymj2c3mzj2bbswwlw45")))) (build-system r-build-system) (home-page "http://minato.sip21c.org/msb/") (synopsis "Functions for medical statistics book with demographic data") @@ -9637,14 +9741,14 @@ Processing.") (define-public r-tm (package (name "r-tm") - (version "0.7-6") + (version "0.7-7") (source (origin (method url-fetch) (uri (cran-uri "tm" version)) (sha256 (base32 - "0spv43kjbpxq3rdxx8ysgrncjyc35ydiwk7gp8n4sig45iqyz59r")))) + "0pyics8j7a4wkh5gzin46l0qars5vgbb1886xqpdqjs1z0gy9nyh")))) (properties `((upstream-name . "tm"))) (build-system r-build-system) (propagated-inputs @@ -9733,13 +9837,13 @@ maps.") (define-public r-tidytree (package (name "r-tidytree") - (version "0.3.0") + (version "0.3.1") (source (origin (method url-fetch) (uri (cran-uri "tidytree" version)) (sha256 - (base32 "1sbfwcxf9v1lhpa0392b49b6qfjrq7nlqz2djqzk5aknj9j64zvy")))) + (base32 "1bnzs62z2l8ck2h9gabmxvayizv4nfn8dmyzry83fv0cspjbyiv7")))) (build-system r-build-system) (propagated-inputs `(("r-ape" ,r-ape) @@ -11053,13 +11157,13 @@ This makes it a convenient and fast interface to C/C++ and Fortran code.") (define-public r-spam (package (name "r-spam") - (version "2.5-0") + (version "2.5-1") (source (origin (method url-fetch) (uri (cran-uri "spam" version)) (sha256 - (base32 "1wfv45jq8zy8kyjr308zicc1461y1777qll1cy6lw4071f9rvba2")))) + (base32 "0ry0a76cljlmilrzcriiizcidxyhq1i7i9bqhvl1qda81ld8hifi")))) (build-system r-build-system) (propagated-inputs `(("r-dotcall64" ,r-dotcall64))) @@ -12402,14 +12506,14 @@ compatible with @code{rzmq} are also provided.") (define-public r-repr (package (name "r-repr") - (version "1.0.1") + (version "1.0.2") (source (origin (method url-fetch) (uri (cran-uri "repr" version)) (sha256 (base32 - "0jy43g34r38fqprcdys0p9pliahrj5l64a9bbkzy206qgz0j5ppc")))) + "0wn9fdddqjgn0bdfl75x89rcxahbgqs324bhg0pfq6va5q2mlbbw")))) (build-system r-build-system) (propagated-inputs `(("r-base64enc" ,r-base64enc) @@ -14805,18 +14909,17 @@ code edited with @code{RStudio IDE}, @code{Emacs} and @code{Vim}.") (define-public r-sctransform (package (name "r-sctransform") - (version "0.2.0") + (version "0.2.1") (source (origin (method url-fetch) (uri (cran-uri "sctransform" version)) (sha256 (base32 - "1r5kiqqs318q59h2i8m7c6nhghp9w6q26ss2y5a390lkhsawgx6p")))) + "07v3lzccsrkh1glfxd1q20r8f8gl9ls5az0s1dvxm4vcls0hlhyn")))) (build-system r-build-system) (propagated-inputs - `(("r-future" ,r-future) - ("r-future-apply" ,r-future-apply) + `(("r-future-apply" ,r-future-apply) ("r-ggplot2" ,r-ggplot2) ("r-gridextra" ,r-gridextra) ("r-mass" ,r-mass) @@ -15092,14 +15195,14 @@ annotated biological functions.") (define-public r-plot3d (package (name "r-plot3d") - (version "1.1.1") + (version "1.3") (source (origin (method url-fetch) (uri (cran-uri "plot3D" version)) (sha256 (base32 - "0chn70fqwyca8lbnjnpbcj08ni0dfbax2gjmzhk2c4w72c04mzpn")))) + "1jfzndnlci9a975qbcv66jiy2l46hs3f2049654x4jp3i4kyrr5r")))) (properties `((upstream-name . "plot3D"))) (build-system r-build-system) (propagated-inputs `(("r-misc3d" ,r-misc3d))) @@ -15824,19 +15927,18 @@ PROJ.4 library.") (define-public r-insol (package (name "r-insol") - (version "1.2") + (version "1.2.1") (source (origin (method url-fetch) (uri (cran-uri "insol" version)) (sha256 (base32 - "14ikz05375pjn9hby7kwkhcnykjilbnkdy5i8lsl7c5qdbhmqcm5")))) + "1d2vqmbp94ff80mfkmq4a8y12r6ryym8hh1568ip9qbn7snc64v1")))) (properties `((upstream-name . "insol"))) (build-system r-build-system) (propagated-inputs - `(("r-raster" ,r-raster) - ("r-rgdal" ,r-rgdal))) + `(("r-raster" ,r-raster))) (native-inputs `(("gfortran" ,gfortran))) (home-page "https://meteoexploration.com/R/insol/index.html") @@ -15927,40 +16029,41 @@ programming problems.") (define-public r-desolve (package (name "r-desolve") - (version "1.25") + (version "1.27") (source (origin (method url-fetch) (uri (cran-uri "deSolve" version)) (sha256 - (base32 "0735y3p5glhqx69rzrc8qgmvs7p7w0p98qxmvylb6bgqp6kp0cbp")))) + (base32 "1qhjq4vxlxd9qmhf6i26x1k7bzhldlxzbby1zgcplicdvlqk951d")))) (properties `((upstream-name . "deSolve"))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) (home-page "https://desolve.r-forge.r-project.org/") (synopsis "Solvers for initial value problems of differential equations") - (description "This package provides functions that solve initial -value problems of a system of first-order ordinary differential equations (ODE), -of partial differential equations (PDE), of differential algebraic equations -(DAE), and of delay differential equations. The functions provide an interface -to the FORTRAN functions lsoda, lsodar, lsode, lsodes of the ODEPACK collection, -to the FORTRAN functions dvode and daspk and a C-implementation of solvers of -the Runge-Kutta family with fixed or variable time steps. The package contains -routines designed for solving ODEs resulting from 1-D, 2-D and 3-D partial -differential equations (PDE) that have been converted to ODEs by numerical -differencing.") + (description "This package provides functions that solve initial value +problems of a system of first-order @dfn{ordinary differential +equations} (ODE), of @dfn{partial differential equations} (PDE), of +@dfn{differential algebraic equations} (DAE), and of delay differential +equations. The functions provide an interface to the FORTRAN functions +@code{lsoda}, @code{lsodar}, @code{lsode}, @code{lsodes} of the ODEPACK +collection, to the FORTRAN functions @code{dvode} and @code{daspk} and a +C-implementation of solvers of the Runge-Kutta family with fixed or variable +time steps. The package contains routines designed for solving ODEs resulting +from 1-D, 2-D and 3-D partial differential equations that have been converted +to ODEs by numerical differencing.") (license license:gpl2+))) (define-public r-pracma (package (name "r-pracma") - (version "2.2.5") + (version "2.2.9") (source (origin (method url-fetch) (uri (cran-uri "pracma" version)) (sha256 - (base32 "0isd3s0i4mzmva8lkh0j76hwjy1w50q7d1n9lhxsnnkgalx3xs1g")))) + (base32 "07mzhzz73wsjjw1q05l024gcd13hwnzsxf873q9dyhw6x3shzshc")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/pracma/") (synopsis "Practical numerical math functions") @@ -16012,3 +16115,2876 @@ graphics directly in the terminal window. This package provides a basic plotting function (and equivalents of curve, density, acf and barplot) as well as a boxplot function.") (license license:lgpl3+))) + +(define-public r-bio3d + (package + (name "r-bio3d") + (version "2.4-0") + (source + (origin + (method url-fetch) + (uri (cran-uri "bio3d" version)) + (sha256 + (base32 + "0ikpk1ppdp50m9kd289z616i382j9i7ji1zchyd4xqfyk8lnxf4s")))) + (properties `((upstream-name . "bio3d"))) + (build-system r-build-system) + (inputs `(("zlib" ,zlib))) + (propagated-inputs `(("r-rcpp" ,r-rcpp))) + (home-page "http://thegrantlab.org/bio3d/") + (synopsis "Biological structure analysis") + (description + "This package provides utilities to process, organize and explore protein +structure, sequence and dynamics data. Features include the ability to read +and write structure, sequence and dynamic trajectory data, perform sequence +and structure database searches, data summaries, atom selection, alignment, +superposition, rigid core identification, clustering, torsion analysis, +distance matrix analysis, structure and sequence conservation analysis, normal +mode analysis, principal component analysis of heterogeneous structure data, +and correlation network analysis from normal mode and molecular dynamics data. +In addition, various utility functions are provided to enable the statistical +and graphical power of the R environment to work with biological sequence and +structural data.") + (license license:gpl2+))) + +(define-public r-bios2cor + (package + (name "r-bios2cor") + (version "2.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "Bios2cor" version)) + (sha256 + (base32 + "1rrz0vs6wbkwys3l5jv1rdnlhyb4r1q9pv7jlnmsx6c1b4f4vz5n")))) + (properties `((upstream-name . "Bios2cor"))) + (build-system r-build-system) + (propagated-inputs + `(("r-bigmemory" ,r-bigmemory) + ("r-bio3d" ,r-bio3d) + ("r-circular" ,r-circular) + ("r-igraph" ,r-igraph))) + (home-page "https://cran.r-project.org/web/packages/Bios2cor/") + (synopsis "From biological sequences and simulations to correlation analysis") + (description + "This package provides utilities for computation and analysis of +correlation/covariation in multiple sequence alignments and in side chain +motions during molecular dynamics simulations. Features include the +computation of correlation/covariation scores using a variety of scoring +functions between either sequence positions in alignments or side chain +dihedral angles in molecular dynamics simulations and utilities to analyze the +correlation/covariation matrix through a variety of tools including network +representation and principal components analysis. In addition, several +utility functions are based on the R graphical environment to provide friendly +tools for help in data interpretation.") + (license license:gpl2+))) + +;; This package includes minified JavaScript files. When upgrading please +;; check that there are no new minified JavaScript files. +(define-public r-networkd3 + (package + (name "r-networkd3") + (version "0.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "networkD3" version)) + (sha256 + (base32 + "02wxki67drppgfka1is1ykg1f2rxf0x0657c0crj7ipfy62jbf1k")) + (snippet + '(begin + (delete-file "inst/htmlwidgets/lib/d3-4.5.0/d3.min.js") + #t)))) + (properties `((upstream-name . "networkD3"))) + (build-system r-build-system) + (arguments + `(#:modules ((guix build utils) + (guix build r-build-system) + (srfi srfi-1) + (ice-9 popen)) + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'process-javascript + (lambda* (#:key inputs #:allow-other-keys) + (with-directory-excursion "inst/htmlwidgets/lib/" + (call-with-values + (lambda () + (unzip2 + `((,(assoc-ref inputs "d3.v4.js") + "d3-4.5.0/d3.min.js")))) + (lambda (sources targets) + (for-each (lambda (source target) + (format #t "Processing ~a --> ~a~%" + source target) + (let ((minified (open-pipe* OPEN_READ "uglify-js" source))) + (call-with-output-file target + (lambda (port) + (dump-port minified port))))) + sources targets)))) + #t))))) + (native-inputs + `(("uglify-js" ,uglify-js) + ;; NOTE: Make sure that this version of d3 is still valid when + ;; upgrading the package. + ("d3.v4.js" + ,(origin + (method url-fetch) + (uri "https://d3js.org/d3.v4.js") + (sha256 + (base32 + "0y7byf6kcinfz9ac59jxc4v6kppdazmnyqfav0dm4h550fzfqqlg")))))) + (propagated-inputs + `(("r-htmlwidgets" ,r-htmlwidgets) + ("r-igraph" ,r-igraph) + ("r-magrittr" ,r-magrittr))) + (home-page "https://cran.r-project.org/package=networkD3") + (synopsis "D3 JavaScript network graphs from R") + (description + "This package creates D3 JavaScript network, tree, dendrogram, and Sankey +graphs from R.") + (license license:gpl3+))) + +(define-public r-aasea + (package + (name "r-aasea") + (version "1.1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "aaSEA" version)) + (sha256 + (base32 + "0him4r8qyp0xssgrmdxjs45yn4d28h5anv4jyxxbbs9phb0m6j3h")))) + (properties `((upstream-name . "aaSEA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-bios2cor" ,r-bios2cor) + ("r-dt" ,r-dt) + ("r-hmisc" ,r-hmisc) + ("r-magrittr" ,r-magrittr) + ("r-networkd3" ,r-networkd3) + ("r-plotly" ,r-plotly) + ("r-seqinr" ,r-seqinr) + ("r-shiny" ,r-shiny) + ("r-shinydashboard" ,r-shinydashboard))) + (home-page "https://cran.r-project.org/web/packages/aaSEA/") + (synopsis "Amino acid substitution effect analyzer") + (description + "Given a protein multiple sequence alignment, it is a daunting task to +assess the effects of substitutions along sequence length. The aaSEA package +is intended to help researchers to rapidly analyze property changes caused by +single, multiple and correlated amino acid substitutions in proteins.") + (license license:gpl3))) + +(define-public r-abacus + (package + (name "r-abacus") + (version "1.0.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ABACUS" version)) + (sha256 + (base32 + "0m1dnkwjr1522l9ddbzzx7ayxvli17sbmk6s28adpmzzjwh2kd1i")))) + (properties `((upstream-name . "ABACUS"))) + (build-system r-build-system) + (propagated-inputs + `(("r-ggplot2" ,r-ggplot2) + ("r-shiny" ,r-shiny))) + (home-page "https://shiny.abdn.ac.uk/Stats/apps/") + (synopsis "Apps-based activities for communicating and understanding statistics") + (description + "This package provides a set of Shiny apps for effective communication +and understanding in statistics. The current version includes properties of +normal distribution, properties of sampling distribution, one-sample z and t +tests, two samples independent (unpaired) t test and analysis of variance.") + (license license:gpl3))) + +(define-public r-abc-rap + (package + (name "r-abc-rap") + (version "0.9.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ABC.RAP" version)) + (sha256 + (base32 + "1kdspln17v0krvahcd55vib4dv5azp60b3r1zf489x10qqbp1mxk")))) + (properties `((upstream-name . "ABC.RAP"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/ABC.RAP/") + (synopsis "Array-based CpG region analysis pipeline") + (description + "This package aims to identify candidate genes that are differentially +methylated between cases and controls. It applies Student's t-test and delta +beta analysis to identify candidate genes containing multiple CpG sites.") + (license license:gpl3))) + +(define-public r-abcadm + (package + (name "r-abcadm") + (version "1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "abcADM" version)) + (sha256 + (base32 + "0vcabnnnwc0psv9v3rda5aap9s8cq1pjh02zva3ki64hlavf2a10")))) + (properties `((upstream-name . "abcADM"))) + (build-system r-build-system) + (propagated-inputs + `(("r-bh" ,r-bh) + ("r-rcpp" ,r-rcpp))) + (home-page "https://cran.r-project.org/web/packages/abcADM/") + (synopsis "Fit accumulated damage models and estimate reliability using ABC") + (description + "This package provides tools to estimate parameters of accumulated +damage (load duration) models based on failure time data under a Bayesian +framework, using @dfn{Approximate Bayesian Computation} (ABC), and to assess +long-term reliability under stochastic load profiles.") + (license license:gpl3))) + +(define-public r-rglpk + (package + (name "r-rglpk") + (version "0.6-4") + (source + (origin + (method url-fetch) + (uri (cran-uri "Rglpk" version)) + (sha256 + (base32 + "19mzpyimzq9zqnbi05j79b2di3nzaln8swggs9p8sqdr60qvr3d2")))) + (properties `((upstream-name . "Rglpk"))) + (build-system r-build-system) + (propagated-inputs + `(("r-slam" ,r-slam))) + (inputs + `(("glpk" ,glpk))) + (home-page "http://R-Forge.R-project.org/projects/rglp/") + (synopsis "R interface to the GNU Linear Programming Kit") + (description + "This package provides an R interface to the GNU Linear Programming Kit, +software for solving large-scale @dfn{linear programming} (LP), @dfn{mixed +integer linear programming} (MILP) and other related problems.") + ;; Either license + (license (list license:gpl2 license:gpl3)))) + +(define-public r-abcdefba + (package + (name "r-abcdefba") + (version "0.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "abcdeFBA" version)) + (sha256 + (base32 + "1rxjripy8v6bxi25vdfjnbk24zkmf752qbl73cin6nvnqflwxkx4")))) + (properties `((upstream-name . "abcdeFBA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-corrplot" ,r-corrplot) + ("r-lattice" ,r-lattice) + ("r-rgl" ,r-rgl) + ("r-rglpk" ,r-rglpk))) + (home-page "https://cran.r-project.org/web/packages/abcdeFBA/") + (synopsis "A-Biologist-Can-Do-Everything of Flux Balance Analysis with this package") + (description + "This package provides functions for Constraint Based Simulation using +Flux Balance Analysis and informative analysis of the data generated during +simulation.") + (license license:gpl2))) + +(define-public r-abcrlda + (package + (name "r-abcrlda") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "abcrlda" version)) + (sha256 + (base32 + "0j29ifsvmxfx2g6v4bpbb4s6miwfpf4vlkpbgj6f2q078s4clc85")))) + (properties `((upstream-name . "abcrlda"))) + (build-system r-build-system) + (home-page "https://ieeexplore.ieee.org/document/8720003/") + (synopsis "Asymptotically bias-corrected regularized linear discriminant analysis") + (description + "This package offers methods to perform @dfn{asymptotically +bias-corrected regularized linear discriminant analysis} (ABC_RLDA) for +cost-sensitive binary classification. The bias-correction is an estimate of +the bias term added to regularized discriminant analysis that minimizes the +overall risk.") + (license license:gpl3))) + +(define-public r-abemus + (package + (name "r-abemus") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "abemus" version)) + (sha256 + (base32 + "1dhllb184byp1yl15rg2w02zgw3iajag7cxshirg47mnmm7n70bb")))) + (properties `((upstream-name . "abemus"))) + (build-system r-build-system) + (propagated-inputs + `(("r-data-table" ,r-data-table))) + (home-page "https://cran.r-project.org/web/packages/abemus/") + (synopsis "Adaptive base error model in ultra-deep sequencing data") + (description + "This package provides an implementation of @dfn{Adaptive Base Error +Model in Ultra-deep Sequencing data} (ABEMUS), which combines +platform-specific genetic knowledge and empirical signal to readily detect and +quantify somatic @dfn{single nucleotide variants} (SNVs) in @dfn{circulating +cell free DNA} (cfDNA).") + (license license:gpl3))) + +;; This package includes minified JavaScript files. When upgrading please +;; check that there are no new minified JavaScript files. +(define-public r-rintrojs + (package + (name "r-rintrojs") + (version "0.2.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "rintrojs" version)) + (sha256 + (base32 + "0vyqb3pyrh12saddar71ac9csn2vkd2j8ln6ygpqys8ky1lc3427")))) + (properties `((upstream-name . "rintrojs"))) + (build-system r-build-system) + (arguments + `(#:modules ((guix build utils) + (guix build r-build-system) + (srfi srfi-1) + (ice-9 popen)) + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'process-javascript + (lambda* (#:key inputs #:allow-other-keys) + (with-directory-excursion "inst/javascript/introjs/" + (call-with-values + (lambda () + (unzip2 + `((,(assoc-ref inputs "intro.js") + "intro.min.js")))) + (lambda (sources targets) + (for-each (lambda (source target) + (format #t "Processing ~a --> ~a~%" + source target) + (let ((minified (open-pipe* OPEN_READ "uglify-js" source))) + (call-with-output-file target + (lambda (port) + (dump-port minified port))))) + sources targets)))) + #t))))) + (native-inputs + `(("uglify-js" ,uglify-js) + ("intro.js" + ,(origin + (method url-fetch) + (uri "https://raw.githubusercontent.com/usablica/intro.js/v2.9.3/intro.js") + (sha256 + (base32 + "1qf8n1sfy9qkiqqnfgg0xbhmfgh0g3mqsjas8qhz230h3zzlzxj8")))))) + (propagated-inputs + `(("r-jsonlite" ,r-jsonlite) + ("r-shiny" ,r-shiny))) + (home-page "https://github.com/carlganz/rintrojs") + (synopsis "Wrapper for the Intro.js library") + (description + "This package provides a wrapper for the @url{http://www.introjs.com, +Intro.js} library. This package makes it easy to include step-by-step +introductions, and clickable hints in a Shiny application. It supports both +static introductions in the UI, and programmatic introductions from the +server-side.") + (license license:agpl3+))) + +(define-public r-sysfonts + (package + (name "r-sysfonts") + (version "0.8") + (source + (origin + (method url-fetch) + (uri (cran-uri "sysfonts" version)) + (sha256 + (base32 + "0wng902plryf2d8fc7k7m3jx11acz51kb2d91cqbyhq7xpk06z43")))) + (properties `((upstream-name . "sysfonts"))) + (build-system r-build-system) + (inputs + `(("freetype" ,freetype) + ("libpng" ,libpng) + ("zlib" ,zlib))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "https://github.com/yixuan/sysfonts") + (synopsis "Loading fonts into R") + (description + "This is a package to simplify loading of system fonts and Google Fonts +into R, in order to support other packages.") + (license license:gpl2))) + +(define-public r-showtextdb + (package + (name "r-showtextdb") + (version "2.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "showtextdb" version)) + (sha256 + (base32 + "1qwwj9x2jvadvwn60h75k99c9xi7yhqjsgaakahz5paxgj583bsh")))) + (properties `((upstream-name . "showtextdb"))) + (build-system r-build-system) + (propagated-inputs + `(("r-sysfonts" ,r-sysfonts))) + (home-page "https://cran.r-project.org/web/packages/showtextdb/") + (synopsis "Font files for the 'showtext' package") + (description + "This package provides font files that can be used by the @code{showtext} +package.") + (license license:asl2.0))) + +(define-public r-showtext + (package + (name "r-showtext") + (version "0.7") + (source + (origin + (method url-fetch) + (uri (cran-uri "showtext" version)) + (sha256 + (base32 + "1ihgqzfia36b0n9aa41p1w98wxxvs1lxh1zz0570hbfqmph1sk73")))) + (properties `((upstream-name . "showtext"))) + (build-system r-build-system) + (inputs + `(("freetype" ,freetype) + ("libpng" ,libpng) + ("zlib" ,zlib))) + (propagated-inputs + `(("r-showtextdb" ,r-showtextdb) + ("r-sysfonts" ,r-sysfonts))) + (native-inputs `(("pkg-config" ,pkg-config))) + (home-page "https://github.com/yixuan/showtext") + (synopsis "Using fonts more easily in R graphs") + (description + "This package aims to make it easy to use various types of +fonts (TrueType, OpenType, Type 1, web fonts, etc.) in R graphs, and supports +most output formats of R graphics including PNG, PDF and SVG. Text glyphs +will be converted into polygons or raster images, hence after the plot has +been created, it no longer relies on the font files. No external software +such as Ghostscript is needed to use this package.") + (license license:asl2.0))) + +(define-public r-emojifont + (package + (name "r-emojifont") + (version "0.5.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "emojifont" version)) + (sha256 + (base32 + "1cdrrl3hvrs8rskyy6zgr7q2mmg8yb9k8sld1m64zsp7y009g19k")))) + (properties `((upstream-name . "emojifont"))) + (build-system r-build-system) + (propagated-inputs + `(("r-ggplot2" ,r-ggplot2) + ("r-proto" ,r-proto) + ("r-showtext" ,r-showtext) + ("r-sysfonts" ,r-sysfonts))) + (home-page "https://guangchuangyu.github.io/emojifont") + (synopsis "Emoji and Font Awesome in R graphics") + (description + "This package enables the use of emoji and the Font Awesome glyphs in +both base and ggplot2 graphics.") + (license license:artistic2.0))) + +(define-public r-abstractr + (package + (name "r-abstractr") + (version "0.1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "abstractr" version)) + (sha256 + (base32 + "1ymwp7syrynwd4i8aj2x5n8jdi9d96fjzl6jb09n0bnr5fgl7vig")))) + (properties `((upstream-name . "abstractr"))) + (build-system r-build-system) + (propagated-inputs + `(("r-colourpicker" ,r-colourpicker) + ("r-emojifont" ,r-emojifont) + ("r-ggplot2" ,r-ggplot2) + ("r-gridextra" ,r-gridextra) + ("r-rintrojs" ,r-rintrojs) + ("r-shiny" ,r-shiny) + ("r-shinythemes" ,r-shinythemes))) + (home-page "https://matt-kumar.shinyapps.io/portfolio") + (synopsis "R-Shiny application for creating visual abstracts") + (description + "This package provides an R Shiny application to create visual abstracts +for original research. A variety of user defined options and formatting are +included.") + (license license:gpl3))) + +(define-public r-abtest + (package + (name "r-abtest") + (version "0.2.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "abtest" version)) + (sha256 + (base32 + "1ky3cf827kj24bhcpk00v5zl5jdkii1gca0x81ay1cjkzfispgws")))) + (properties `((upstream-name . "abtest"))) + (build-system r-build-system) + (propagated-inputs + `(("r-matrix" ,r-matrix) + ("r-mvtnorm" ,r-mvtnorm) + ("r-plotrix" ,r-plotrix) + ("r-rcolorbrewer" ,r-rcolorbrewer) + ("r-rcpp" ,r-rcpp) + ("r-sn" ,r-sn) + ("r-truncnorm" ,r-truncnorm) + ("r-vgam" ,r-vgam))) + (home-page "https://cran.r-project.org/web/packages/abtest/") + (synopsis "Bayesian A/B testing") + (description + "This package provides functions for Bayesian A/B testing including prior +elicitation options based on Kass and Vaidyanathan (1992) +@url{doi:10.1111/j.2517-6161.1992.tb01868.x}.") + (license license:gpl2+))) + +(define-public r-accept + (package + (name "r-accept") + (version "0.7.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "accept" version)) + (sha256 + (base32 + "1r4mhy9g4wjcjgdd0gwdarmr09292il3vdkmx0hz7vh9mffyr9kx")))) + (properties `((upstream-name . "accept"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-extrafont" ,r-extrafont) + ("r-mass" ,r-mass) + ("r-plotly" ,r-plotly) + ("r-stringr" ,r-stringr) + ("r-viridis" ,r-viridis))) + (home-page "https://cran.r-project.org/web/packages/accept/") + (synopsis "Acute COPD Exacerbation Prediction Tool (ACCEPT)") + (description + "This package allows clinicians to predict the rate and severity of +future acute exacerbation in @dfn{Chronic Obstructive Pulmonary +Disease} (COPD) patients, based on the clinical prediction model published in +Adibi et al. (2019) @url{doi:10.1101/651901}.") + (license license:gpl3))) + +(define-public r-smpracticals + (package + (name "r-smpracticals") + (version "1.4-3") + (source + (origin + (method url-fetch) + (uri (cran-uri "SMPracticals" version)) + (sha256 + (base32 + "0zxq84f9i3b86xx6msb25b61gyj9k09iab2b7wg4d93yas9qzayf")))) + (properties `((upstream-name . "SMPracticals"))) + (build-system r-build-system) + (propagated-inputs + `(("r-ellipse" ,r-ellipse) + ("r-mass" ,r-mass) + ("r-nlme" ,r-nlme) + ("r-survival" ,r-survival))) + (home-page "http://statwww.epfl.ch/davison/SM/") + (synopsis "Practicals for use with Davison (2003) Statistical Models") + (description + "This package contains the datasets and a few functions for use with the +practicals outlined in Appendix A of the book Statistical Models (Davison, +2003, Cambridge University Press). The practicals themselves can be found at +@url{http://statwww.epfl.ch/davison/SM/}.") + (license license:gpl2+))) + +(define-public r-fgui + (package + (name "r-fgui") + (version "1.0-8") + (source + (origin + (method url-fetch) + (uri (cran-uri "fgui" version)) + (sha256 + (base32 + "024fzd1c7iwqprn26hwjb9l2qlvvyzl449d7iixy0x69djwsrysv")))) + (properties `((upstream-name . "fgui"))) + (build-system r-build-system) + (home-page + "https://sites.google.com/site/thomashoffmannproject/software/fgui") + (synopsis "Create GUI for R functions") + (description + "Rapidly create a GUI for a function you created by automatically +creating widgets for arguments of the function. This package automatically +parses help routines for context-sensitive help to these arguments. The +interface is essentially a wrapper to some Tcl/Tk routines to both simplify +and facilitate GUI creation. More advanced Tcl/Tk routines/GUI objects can be +incorporated into the interface for greater customization for the more +experienced.") + ;; Any version of the GPL. + (license (list license:gpl2+ license:gpl3+)))) + +(define-public r-tcltk2 + (package + (name "r-tcltk2") + (version "1.2-11") + (source + (origin + (method url-fetch) + (uri (cran-uri "tcltk2" version)) + (sha256 + (base32 + "1ibxld379600xx7kiqq3fck083s8psry12859980218rnzikl65d")))) + (properties `((upstream-name . "tcltk2"))) + (build-system r-build-system) + (inputs + `(("tcl" ,tcl) + ("tk" ,tk))) + (home-page "http://www.sciviews.org/SciViews-R") + (synopsis "Tcl/Tk additions") + (description + "This package provides a series of additional Tcl commands and Tk widgets +with style and various functions to supplement the tcltk package") + (license license:lgpl3))) + +(define-public r-accrual + (package + (name "r-accrual") + (version "1.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "accrual" version)) + (sha256 + (base32 + "11clm9s5c5518nmp6hd6pjnp0s28y92b2i2x0xgj4j5g816p4j3z")))) + (properties `((upstream-name . "accrual"))) + (build-system r-build-system) + (propagated-inputs + `(("r-fgui" ,r-fgui) + ("r-smpracticals" ,r-smpracticals) + ("r-tcltk2" ,r-tcltk2))) + (home-page "https://cran.r-project.org/web/packages/accrual/") + (synopsis "Bayesian accrual prediction") + (description + "Subject recruitment for medical research is challenging. Slow patient +accrual leads to delay in research. Accrual monitoring during the process of +recruitment is critical. Researchers need reliable tools to manage the +accrual rate. This package provides an implementation of a Bayesian method +that integrates researcher's experience on previous trials and data from the +current study, providing reliable prediction on accrual rate for clinical +studies. It provides functions for Bayesian accrual prediction which can be +easily used by statisticians and clinical researchers.") + (license license:gpl2))) + +(define-public r-accrued + (package + (name "r-accrued") + (version "1.4.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "accrued" version)) + (sha256 + (base32 + "05g1jb5914z18rcai1ahn7nihn27vr2rnadwv94gc1j7ivvikvs5")))) + (properties `((upstream-name . "accrued"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/accrued/") + (synopsis "Data quality visualization tools for partially accruing data") + (description + "This is a package for visualizing data quality of partially accruing +data.") + (license license:gpl3))) + +(define-public r-mda + (package + (name "r-mda") + (version "0.4-10") + (source + (origin + (method url-fetch) + (uri (cran-uri "mda" version)) + (sha256 + (base32 + "19g6kn6g0shidrjfffklbmzc5w7mcimrxhagx4nmpslg59ibqdkh")))) + (properties `((upstream-name . "mda"))) + (build-system r-build-system) + (propagated-inputs `(("r-class" ,r-class))) + (native-inputs `(("gfortran" ,gfortran))) + (home-page "https://cran.r-project.org/web/packages/mda/") + (synopsis "Mixture and flexible discriminant analysis") + (description + "This is a package for mixture and flexible discriminant analysis, +@dfn{multivariate adaptive regression splines} (MARS), BRUTO, and so on.") + (license license:gpl2))) + +(define-public r-elasticnet + (package + (name "r-elasticnet") + (version "1.1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "elasticnet" version)) + (sha256 + (base32 + "0p9dplnsp28z4s2fl6afbwrgd0aj339fak8mmndicmrh7bb7rpmb")))) + (properties `((upstream-name . "elasticnet"))) + (build-system r-build-system) + (propagated-inputs + `(("r-lars" ,r-lars))) + (home-page "http://www.stat.umn.edu/~hzou") + (synopsis "Elastic-Net for sparse estimation and sparse PCA") + (description + "This package provides functions for fitting the entire solution path of +the Elastic-Net and also provides functions for estimating sparse Principal +Components. The Lasso solution paths can be computed by the same function.") + (license license:gpl2+))) + +(define-public r-sparselda + (package + (name "r-sparselda") + (version "0.1-9") + (source + (origin + (method url-fetch) + (uri (cran-uri "sparseLDA" version)) + (sha256 + (base32 + "1k3sw9kc40yxnfss4vrsx34qxmv8ssddyhbfjhxrdldvblhbwchb")))) + (properties `((upstream-name . "sparseLDA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-elasticnet" ,r-elasticnet) + ("r-mass" ,r-mass) + ("r-mda" ,r-mda))) + (home-page "http://www.imm.dtu.dk/~lhc") + (synopsis "Sparse discriminant analysis") + (description + "This package performs sparse linear discriminant analysis for Gaussians +and mixture of Gaussian models.") + (license license:gpl2+))) + +(define-public r-accsda + (package + (name "r-accsda") + (version "1.0.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "accSDA" version)) + (sha256 + (base32 + "0sgxy5y8kkc1n35657kifwfjsba7y5m1vbr7rkk5lmbpkzahqm61")))) + (properties `((upstream-name . "accSDA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-ggplot2" ,r-ggplot2) + ("r-ggthemes" ,r-ggthemes) + ("r-gridextra" ,r-gridextra) + ("r-mass" ,r-mass) + ("r-rarpack" ,r-rarpack) + ("r-sparselda" ,r-sparselda))) + (home-page "https://github.com/gumeo/accSDA/wiki") + (synopsis "Accelerated sparse discriminant analysis") + (description + "This package provides an implementation of sparse linear discriminant +analysis, which is a supervised classification method for multiple classes. +Various novel optimization approaches to this problem are implemented +including @dfn{alternating direction method of multipliers} (ADMM), +@dfn{proximal gradient} (PG) and @dfn{accelerated proximal gradient} (APG). +Functions for performing cross validation are also supplied along with basic +prediction and plotting functions. @dfn{Sparse zero variance +discriminant} (SZVD) analysis is also included in the package.") + (license license:gpl2+))) + +(define-public r-ace2fastq + (package + (name "r-ace2fastq") + (version "0.6.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ace2fastq" version)) + (sha256 + (base32 + "09kk3yyqnr2xp820g0p3aai9a21figigjr9lxkr3zjq2d8gzwfic")))) + (properties `((upstream-name . "ace2fastq"))) + (build-system r-build-system) + (propagated-inputs + `(("r-stringr" ,r-stringr))) + (home-page "https://github.com/c5sire/ace2fastq") + (synopsis "ACE file to FASTQ converter") + (description + "The ACE file format is used in genomics to store contigs from sequencing +machines. This tools converts it into FASTQ format. Both formats contain the +sequence characters and their corresponding quality information. Unlike the +FASTQ file, the ACE file stores the quality values numerically. The +conversion algorithm uses the standard Sanger formula. The package +facilitates insertion into pipelines, and content inspection.") + (license license:gpl3))) + +(define-public r-rngwell + (package + (name "r-rngwell") + (version "0.10-5") + (source + (origin + (method url-fetch) + (uri (cran-uri "rngWELL" version)) + (sha256 + (base32 + "0b4ys525gksgqwqx9id4bdgyi9mwj6n3r87xdzf4fc9hp3cc16jb")))) + (properties `((upstream-name . "rngWELL"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/rngWELL/") + (synopsis "Toolbox for WELL random number generators") + (description + "This is a dedicated package to WELL pseudo random generators, which were +introduced in Panneton et al. (2006), ``Improved Long-Period Generators Based +on Linear Recurrences Modulo 2'', ACM Transactions on Mathematical Software.") + (license license:bsd-3))) + +(define-public r-randtoolbox + (package + (name "r-randtoolbox") + (version "1.30.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "randtoolbox" version)) + (sha256 + (base32 + "141p13ajgzmb2s89rlac7zrra92mi1izvpfrngb4kqzlf3igdsqd")))) + (properties `((upstream-name . "randtoolbox"))) + (build-system r-build-system) + (propagated-inputs + `(("r-rngwell" ,r-rngwell))) + (native-inputs + `(("gfortran" ,gfortran))) + (home-page "https://cran.r-project.org/web/packages/randtoolbox/") + (synopsis "Toolbox for pseudo and quasi random number generation") + (description + "This package provides + +@enumerate +@item pseudo random generators, such as general linear +congruential generators, multiple recursive generators and generalized +feedback shift register (SF-Mersenne Twister algorithm and WELL +generators) + +@item quasi random generators, such as the Torus algorithm, the Sobol +sequence, the Halton sequence (including the Van der Corput sequence), and + +@item some generator tests: the gap test, the serial test, the poker test. +@end enumerate + +See e.g. Gentle (2003) @url{doi:10.1007/b97336}.") + (license license:bsd-3))) + +(define-public r-lhs + (package + (name "r-lhs") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "lhs" version)) + (sha256 + (base32 + "0lzaqr7xi3ckln5nglv5xf5njm359slpz1jc6s02hpsqdw6armd4")))) + (properties `((upstream-name . "lhs"))) + (build-system r-build-system) + (propagated-inputs `(("r-rcpp" ,r-rcpp))) + (home-page "https://github.com/bertcarnell/lhs") + (synopsis "Latin Hypercube Samples") + (description + "This package provides a number of methods for creating and augmenting +Latin Hypercube Samples.") + (license license:gpl3))) + +(define-public r-acebayes + (package + (name "r-acebayes") + (version "1.8") + (source + (origin + (method url-fetch) + (uri (cran-uri "acebayes" version)) + (sha256 + (base32 + "1xm6bw0qm2vlcrk274x0bawzb2lnacb1wsmzba5mg3i75a55pqln")))) + (properties `((upstream-name . "acebayes"))) + (build-system r-build-system) + (propagated-inputs + `(("r-compare" ,r-compare) + ("r-lhs" ,r-lhs) + ("r-randtoolbox" ,r-randtoolbox) + ("r-rcpp" ,r-rcpp) + ("r-rcpparmadillo" ,r-rcpparmadillo))) + (home-page "https://cran.r-project.org/web/packages/acebayes/") + (synopsis "Optimal Bayesian experimental design using the ACE algorithm") + (description + "Finding an optimal Bayesian experimental design involves maximizing an +objective function given by the expectation of some appropriately chosen +utility function with respect to the joint distribution of unknown +quantities (including responses). This objective function is usually not +available in closed form and the design space can be continuous and of high +dimensionality. This package uses @dfn{Approximate Coordinate Exchange} (ACE) +to maximise an approximation to the expectation of the utility function.") + (license license:gpl2))) + +(define-public r-acet + (package + (name "r-acet") + (version "1.8.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ACEt" version)) + (sha256 + (base32 + "0626d6kg485xjya164wagrr5z223jvi93ywbwpdns7fkm03c0dlq")))) + (properties `((upstream-name . "ACEt"))) + (build-system r-build-system) + (propagated-inputs + `(("r-bh" ,r-bh) + ("r-mass" ,r-mass) + ("r-rcpp" ,r-rcpp) + ("r-rcpparmadillo" ,r-rcpparmadillo))) + (home-page "https://cran.r-project.org/web/packages/ACEt/") + (synopsis "Estimating dynamic heritability and twin model comparison") + (description + "This package supports twin models that are able to estimate the dynamic +behaviour of the variance components in the classical twin models with respect +to age using B-splines and P-splines.") + (license license:gpl2+))) + +(define-public r-acfmperiod + (package + (name "r-acfmperiod") + (version "1.0.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "acfMPeriod" version)) + (sha256 + (base32 + "1yww8isfrbs2v9s94hx7p2imyszcgadwafdgpj438n2ik0q6p9d5")))) + (properties `((upstream-name . "acfMPeriod"))) + (build-system r-build-system) + (propagated-inputs + `(("r-mass" ,r-mass))) + (home-page "https://cran.r-project.org/web/packages/acfMPeriod/") + (synopsis "Estimation of the ACF from the M-periodogram") + (description + "This package support non-robust and robust computations of the sample +autocovariance (ACOVF) and sample autocorrelation functions (ACF) of +univariate and multivariate processes. The methodology consists in reversing +the diagonalization procedure involving the periodogram or the +cross-periodogram and the Fourier transform vectors, and, thus, obtaining the +ACOVF or the ACF as discussed in Fuller (1995) +@url{doi:10.1002/9780470316917}. The robust version is obtained by fitting +robust M-regressors to obtain the M-periodogram or M-cross-periodogram as +discussed in Reisen et al. (2017) @url{doi:10.1016/j.jspi.2017.02.008}.") + (license license:gpl2+))) + +(define-public r-gamlss-data + (package + (name "r-gamlss-data") + (version "5.1-4") + (source + (origin + (method url-fetch) + (uri (cran-uri "gamlss.data" version)) + (sha256 + (base32 + "1dgfspbmps6ipzcmw681wjdp320nm50dwsxafgrcwxndqgc7fdqd")))) + (properties `((upstream-name . "gamlss.data"))) + (build-system r-build-system) + (home-page "http://www.gamlss.org/") + (synopsis "GAMLSS data") + (description + "This package provides data used as examples to demonstrate GAMLSS +models.") + ;; Either version of the license + (license (list license:gpl2 license:gpl3)))) + +(define-public r-gamlss + (package + (name "r-gamlss") + (version "5.1-5") + (source + (origin + (method url-fetch) + (uri (cran-uri "gamlss" version)) + (sha256 + (base32 + "0gcngfck0dk2rhjg0z1fnc61dqs0s049jy2rkywaf57531s2k8bc")))) + (properties `((upstream-name . "gamlss"))) + (build-system r-build-system) + (propagated-inputs + `(("r-gamlss-data" ,r-gamlss-data) + ("r-gamlss-dist" ,r-gamlss-dist) + ("r-mass" ,r-mass) + ("r-nlme" ,r-nlme) + ("r-survival" ,r-survival))) + (home-page "http://www.gamlss.org/") + (synopsis "Generalized additive models for location scale and shape") + (description + "This package provides functions for fitting the generalized additive +models for location scale and shape introduced by Rigby and +Stasinopoulos (2005), @url{doi:10.1111/j.1467-9876.2005.00510.x}. The models +use a distributional regression approach where all the parameters of the +conditional distribution of the response variable are modelled using +explanatory variables.") + ;; Either version of the license + (license (list license:gpl2 license:gpl3)))) + +(define-public r-acid + (package + (name "r-acid") + (version "1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "acid" version)) + (sha256 + (base32 + "030i0y8s283ivbsmjccpbv9v7mgbcg2jk9df7vgcbbns74swf9hd")))) + (properties `((upstream-name . "acid"))) + (build-system r-build-system) + (propagated-inputs + `(("r-gamlss" ,r-gamlss) + ("r-gamlss-dist" ,r-gamlss-dist) + ("r-hmisc" ,r-hmisc))) + (home-page "https://cran.r-project.org/web/packages/acid/") + (synopsis "Analysing conditional income distributions") + (description + "This package provides functions for the analysis of income distributions +for subgroups of the population as defined by a set of variables like age, +gender, region, etc. This entails a Kolmogorov-Smirnov test for a mixture +distribution as well as functions for moments, inequality measures, entropy +measures and polarisation measures of income distributions. This package thus +aides the analysis of income inequality by offering tools for the exploratory +analysis of income distributions at the disaggregated level.") + (license license:gpl3))) + +(define-public r-acm4r + (package + (name "r-acm4r") + (version "1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "acm4r" version)) + (sha256 + (base32 + "1wqzc35i1rshx0zlmas8y4qkkvy6h9r4i4apscjjv1xg2wjflzxa")))) + (properties `((upstream-name . "acm4r"))) + (build-system r-build-system) + (propagated-inputs `(("r-mass" ,r-mass))) + (home-page "https://cran.r-project.org/web/packages/acm4r/") + (synopsis "Align-and-count method comparisons of RFLP data") + (description + "This is a package to compare sequence fragment lengths or molecular +weights from pairs of lanes. The number of matching bands in the +@dfn{Restriction Fragment Length Polymorphism} (RFLP) data is calculated using +the align-and-count method.") + ;; Any version of the GPL + (license (list license:gpl2+ license:gpl3+)))) + +(define-public r-filematrix + (package + (name "r-filematrix") + (version "1.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "filematrix" version)) + (sha256 + (base32 + "1v3aj1ng742msb0sfdnjsbqb508mqjf8jlq2v33vxldhradw5w0b")))) + (properties `((upstream-name . "filematrix"))) + (build-system r-build-system) + ;; These inputs are needed for vignettes + (native-inputs + `(("r-knitr" ,r-knitr) + ("r-rmarkdown" ,r-rmarkdown) + ("pandoc-citeproc" ,ghc-pandoc-citeproc))) + (home-page "https://github.com/andreyshabalin/filematrix") + (synopsis "File-backed matrix class with convenient read and write access") + (description + "This package provides an interface for working with large matrices +stored in files, not in computer memory. It supports multiple non-character +data types (double, integer, logical and raw) of various sizes (e.g. 8 and 4 +byte real values). Access to parts of the matrix is done by indexing, exactly +as with usual R matrices. It supports very large matrices; the package has +been tested on multi-terabyte matrices. It allows for more than 2^32 rows or +columns, ad allows for quick addition of extra columns to a filematrix.") + (license license:lgpl3))) + +(define-public r-acmeeqtl + (package + (name "r-acmeeqtl") + (version "1.6") + (source + (origin + (method url-fetch) + (uri (cran-uri "ACMEeqtl" version)) + (sha256 + (base32 + "049xjv2ym35bbn43zwi68cq27fwdh404vp0r2ca5gxgmmx8kj1cz")))) + (properties `((upstream-name . "ACMEeqtl"))) + (build-system r-build-system) + (propagated-inputs + `(("r-filematrix" ,r-filematrix))) + (home-page "https://github.com/andreyshabalin/ACMEeqtl") + (synopsis "Estimation of interpretable eQTL effect sizes") + (description + "This package provides a non-linear model, termed ACME, that reflects a +parsimonious biological model for allelic contributions of cis-acting eQTLs. +With non-linear least-squares algorithm the maximum likelihood parameters can +be estimated. The ACME model provides interpretable effect size estimates and +p-values with well controlled Type-I error.") + (license license:lgpl3))) + +(define-public r-acmer + (package + (name "r-acmer") + (version "1.1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "acmeR" version)) + (sha256 + (base32 + "000b2hqlhj93958nddw0fqb15ahigs08najv2miivym046x04mf7")))) + (properties `((upstream-name . "acmeR"))) + (build-system r-build-system) + (propagated-inputs `(("r-foreign" ,r-foreign))) + (home-page "https://cran.r-project.org/web/packages/acmeR/") + (synopsis "ACME estimator of bird and bat mortality by wind turbines") + (description + "This package provides an implementation of the ACME estimator, described +in Wolpert (2015), ACME: A Partially Periodic Estimator of Avian & Chiropteran +Mortality at Wind Turbines. Unlike most other models, this estimator supports +decreasing-hazard Weibull model for persistence; decreasing search proficiency +as carcasses age; variable bleed-through at successive searches; and interval +mortality estimates. The package provides, based on search data, functions +for estimating the mortality inflation factor in Frequentist and Bayesian +settings.") + (license license:expat))) + +(define-public r-r-huge + (package + (name "r-r-huge") + (version "0.9.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "R.huge" version)) + (sha256 + (base32 + "13p558qalv60pgr24nsm6mi92ryj65rsbqa6pgdwy0snjqx12bgi")))) + (properties `((upstream-name . "R.huge"))) + (build-system r-build-system) + (propagated-inputs + `(("r-r-methodss3" ,r-r-methodss3) + ("r-r-oo" ,r-r-oo) + ("r-r-utils" ,r-r-utils))) + (home-page "https://github.com/HenrikBengtsson/R.huge") + (synopsis "Methods for accessing huge amounts of data") + (description + "This is a deprecated package for accessing huge amounts of data. + Cross-platform alternatives are the following packages: bigmemory (CRAN), +ff (CRAN), or BufferedMatrix (Bioconductor). The main usage of it was inside +the @code{aroma.affymetrix} package.") + (license license:lgpl2.1+))) + +(define-public r-r-filesets + (package + (name "r-r-filesets") + (version "2.13.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "R.filesets" version)) + (sha256 + (base32 + "124rygq0bl9n4akxcm868nl30cyk3rz0iprb98zlpk62gci9f5fg")))) + (properties `((upstream-name . "R.filesets"))) + (build-system r-build-system) + (propagated-inputs + `(("r-digest" ,r-digest) + ("r-r-cache" ,r-r-cache) + ("r-r-methodss3" ,r-r-methodss3) + ("r-r-oo" ,r-r-oo) + ("r-r-utils" ,r-r-utils))) + (home-page "https://github.com/HenrikBengtsson/R.filesets") + (synopsis "Easy handling of and access to files") + (description + "This package provides classes and methods to locate, setup, subset, +navigate and iterate file sets, i.e. sets of files located in one or more +directories on the file system. The API is designed such that these classes +can be extended via inheritance to provide a richer API for special file +formats. Moreover, a specific name format is defined such that filenames and +directories can be considered to have full names which consists of a name +followed by comma-separated tags. This adds additional flexibility to +identify file sets and individual files.") + (license license:lgpl2.1+))) + +(define-public r-r-devices + (package + (name "r-r-devices") + (version "2.16.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "R.devices" version)) + (sha256 + (base32 + "15zlnq3g27whq26fbcy5zfl5hiddm256h4rga4frblg6wqlbkvdd")))) + (properties `((upstream-name . "R.devices"))) + (build-system r-build-system) + (propagated-inputs + `(("r-base64enc" ,r-base64enc) + ("r-r-methodss3" ,r-r-methodss3) + ("r-r-oo" ,r-r-oo) + ("r-r-utils" ,r-r-utils))) + (home-page "https://github.com/HenrikBengtsson/R.devices") + (synopsis "Unified handling of graphics devices") + (description + "This package provides functions for creating plots and image files in a +unified way regardless of output format (EPS, PDF, PNG, SVG, TIFF, WMF, etc.). +Default device options as well as scales and aspect ratios are controlled in a +uniform way across all device types. Switching output format requires minimal +changes in code. This package is ideal for large-scale batch processing, +because it will never leave open graphics devices or incomplete image files +behind, even on errors or user interrupts.") + (license license:lgpl2.1+))) + +(define-public r-acnr + (package + (name "r-acnr") + (version "1.0.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "acnr" version)) + (sha256 + (base32 + "087hq4i7jp67ba2finzsqjfnqbiprl33na6ryjv9zqzsdawj9cym")))) + (properties `((upstream-name . "acnr"))) + (build-system r-build-system) + (home-page "https://github.com/mpierrejean/acnr") + (synopsis "Annotated copy-number regions") + (description + "This package provides SNP array data from different types of copy-number +regions. These regions were identified manually by the authors of the package +and may be used to generate realistic data sets with known truth.") + (license license:lgpl2.1+))) + +(define-public r-acopula + (package + (name "r-acopula") + (version "0.9.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "acopula" version)) + (sha256 + (base32 + "0vvbbw8pfs9jwfz5c57lw48pr0qj661r0ys007q6zf9jmlrhx1ln")))) + (properties `((upstream-name . "acopula"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/acopula/") + (synopsis "Modelling dependence with multivariate Archimax copulas") + (description + "Archimax copulas are a mixture of Archimedean and EV copulas. This +package provides definitions of several parametric families of generator and +dependence function, computes CDF and PDF, estimates parameters, tests for +goodness of fit, generates random sample and checks copula properties for +custom constructs. In the 2-dimensional case explicit formulas for density +are used, contrary to higher dimensions when all derivatives are linearly +approximated. Several non-archimax families (normal, FGM, Plackett) are +provided as well.") + (license license:gpl2))) + +(define-public r-tuner + (package + (name "r-tuner") + (version "1.3.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "tuneR" version)) + (sha256 + (base32 + "0av978m4h2iqazyfq6n2cgkh4wpllihh7s29lah2nb8ngc0w5hxx")))) + (properties `((upstream-name . "tuneR"))) + (build-system r-build-system) + (propagated-inputs `(("r-signal" ,r-signal))) + (home-page "https://cran.r-project.org/web/packages/tuneR/") + (synopsis "Analysis of music and speech") + (description + "This is a package for the analysis of music and speech. Analyze music +and speech, extract features like MFCCs, handle wave files and their +representation in various ways, read MP3, read MIDI, perform steps of a +transcription, ...") + ;; Either of these versions. + (license (list license:gpl2 license:gpl3)))) + +(define-public r-seewave + (package + (name "r-seewave") + (version "2.1.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "seewave" version)) + (sha256 + (base32 + "1qg8f5gik9pw6f9mcxqmrc9x3003s8vdm6g01pjjpyc9qaqiz2vi")))) + (properties `((upstream-name . "seewave"))) + (build-system r-build-system) + (propagated-inputs + `(("r-tuner" ,r-tuner))) + (home-page "http://rug.mnhn.fr/seewave") + (synopsis "Sound analysis and synthesis") + (description + "This package provides functions for analysing, manipulating, displaying, +editing and synthesizing time waves (particularly sound). This package +processes time analysis (oscillograms and envelopes), spectral content, +resonance quality factor, entropy, cross correlation and autocorrelation, +zero-crossing, dominant frequency, analytic signal, frequency coherence, 2D +and 3D spectrograms and many other analyses.") + (license license:gpl2+))) + +(define-public r-acousticndlcoder + (package + (name "r-acousticndlcoder") + (version "1.0.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "AcousticNDLCodeR" version)) + (sha256 + (base32 + "1fgzgwanpv2pzy74xdk3hamc44p8qch467wh163dxby8jr9ik0sb")))) + (properties + `((upstream-name . "AcousticNDLCodeR"))) + (build-system r-build-system) + (propagated-inputs + `(("r-seewave" ,r-seewave) + ("r-tuner" ,r-tuner) + ("r-zoo" ,r-zoo))) + (home-page "https://cran.r-project.org/web/packages/AcousticNDLCodeR/") + (synopsis "Coding sound files for use with NDL") + (description + "Make acoustic cues to use with the R package @code{ndl}. +The package implements functions used in the PLoS ONE paper \"Words from +spontaneous conversational speech can be recognized with human-like accuracy +by an error-driven learning algorithm that discriminates between meanings +straight from smart acoustic features, bypassing the phoneme as recognition +unit.\" @url{doi:10.1371/journal.pone.0174623}") + (license license:gpl2+))) + +(define-public r-acp + (package + (name "r-acp") + (version "2.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "acp" version)) + (sha256 + (base32 + "0lcwbjcyyr32m6qjmjqh25qjwrbyqj1n092xhgbhxzd8fslppnmn")))) + (properties `((upstream-name . "acp"))) + (build-system r-build-system) + (propagated-inputs + `(("r-quantmod" ,r-quantmod) + ("r-tseries" ,r-tseries))) + (home-page "https://cran.r-project.org/web/packages/acp/") + (synopsis "Autoregressive conditional Poisson") + (description + "This package supports the analysis of count data exhibiting +autoregressive properties, using the @dfn{Autoregressive Conditional Poisson} +model (ACP(p,q)) proposed by Heinen (2003).") + (license license:gpl2))) + +(define-public r-ada + (package + (name "r-ada") + (version "2.0-5") + (source + (origin + (method url-fetch) + (uri (cran-uri "ada" version)) + (sha256 + (base32 + "1h3a07czp0w3hrhjcg1fz721y8vsfclzqi3rq8qfzgpfb4h1f06r")))) + (properties `((upstream-name . "ada"))) + (build-system r-build-system) + (propagated-inputs `(("r-rpart" ,r-rpart))) + (home-page "https://cran.r-project.org/web/packages/ada/") + (synopsis "Stochastic boosting") + (description + "This package provides a straightforward, well-documented, and broad +boosting routine for classification, ideally suited for small to +moderate-sized data sets. It performs discrete, real, and gentle boost under +both exponential and logistic loss on a given data set.") + ;; Any version of the GPL. + (license (list license:gpl2+ license:gpl3+)))) + +(define-public r-genalg + (package + (name "r-genalg") + (version "0.2.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "genalg" version)) + (sha256 + (base32 + "1wzfamq8k5yhwbdx0wy1w5bks93brj0p890xxc4yqrja4w38ja3s")))) + (properties `((upstream-name . "genalg"))) + (build-system r-build-system) + (home-page "https://github.com/egonw/genalg") + (synopsis "R based genetic algorithm") + (description + "This package provides an R based genetic algorithm for binary and +floating point chromosomes.") + (license license:gpl2))) + +(define-public r-kernelfactory + (package + (name "r-kernelfactory") + (version "0.3.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "kernelFactory" version)) + (sha256 + (base32 + "001kw9k3ivd4drd4mwqapkkk3f4jgljiaprhg2630hmll064s89j")))) + (properties `((upstream-name . "kernelFactory"))) + (build-system r-build-system) + (propagated-inputs + `(("r-auc" ,r-auc) + ("r-genalg" ,r-genalg) + ("r-kernlab" ,r-kernlab) + ("r-randomforest" ,r-randomforest))) + (home-page "https://cran.r-project.org/web/packages/kernelFactory/") + (synopsis "Ensemble of kernel machines") + (description + "Kernel factory is an ensemble method where each base classifier (random +forest) is fit on the kernel matrix of a subset of the training data.") + (license license:gpl2+))) + +(define-public r-dummies + (package + (name "r-dummies") + (version "1.5.6") + (source + (origin + (method url-fetch) + (uri (cran-uri "dummies" version)) + (sha256 + (base32 + "01f84crqx17xd6xy55qxlvsj3knm8lhw7jl26p2rh2w3y0nvqlbm")))) + (properties `((upstream-name . "dummies"))) + (build-system r-build-system) + (home-page "http://www.decisionpatterns.com") + (synopsis "Create dummy/indicator variables flexibly and efficiently") + (description + "This package lets you expand factors, characters and other eligible +classes into dummy/indicator variables.") + (license license:gpl2+))) + +(define-public r-acrm + (package + (name "r-acrm") + (version "0.1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "aCRM" version)) + (sha256 + (base32 + "0kzp568hd9c9a9qgniia5s5gv0q5f89xfvvwpzb197gqhs3x092v")))) + (properties `((upstream-name . "aCRM"))) + (build-system r-build-system) + (propagated-inputs + `(("r-ada" ,r-ada) + ("r-dummies" ,r-dummies) + ("r-kernelfactory" ,r-kernelfactory) + ("r-randomforest" ,r-randomforest))) + (home-page "https://cran.r-project.org/web/packages/aCRM/") + (synopsis "Convenience functions for analytical customer relationship management") + (description + "This package provides convenience functions for data preparation and +modeling often used in @dfn{analytical customer relationship +management} (aCRM).") + (license license:gpl2+))) + +(define-public r-treeclust + (package + (name "r-treeclust") + (version "1.1-7") + (source + (origin + (method url-fetch) + (uri (cran-uri "treeClust" version)) + (sha256 + (base32 + "1s7kh6q0bkixsygrip95zf1bi10ihddsa5lq9dfxd68yh8rsby6z")))) + (properties `((upstream-name . "treeClust"))) + (build-system r-build-system) + (propagated-inputs + `(("r-cluster" ,r-cluster) + ("r-rpart" ,r-rpart))) + (home-page "https://cran.r-project.org/web/packages/treeClust/") + (synopsis "Cluster distances through trees") + (description + "This package provides tools to create a measure of inter-point +dissimilarity useful for clustering mixed data, and, optionally, perform the +clustering.") + (license license:gpl2+))) + +(define-public r-acrosstic + (package + (name "r-acrosstic") + (version "1.0-3") + (source + (origin + (method url-fetch) + (uri (cran-uri "AcrossTic" version)) + (sha256 + (base32 + "03180h79jhjd66ibrnsfp3yyp2jlfysp7cymw46phzj2palghsc0")))) + (properties `((upstream-name . "AcrossTic"))) + (build-system r-build-system) + (propagated-inputs + `(("r-lpsolve" ,r-lpsolve) + ("r-treeclust" ,r-treeclust))) + (home-page "https://cran.r-project.org/web/packages/AcrossTic/") + (synopsis "Cost-minimal regular spanning subgraph with TreeClust") + (description + "This is a package for constructing minimum-cost regular spanning +subgraph as part of a non-parametric two-sample test for equality of +distribution.") + (license license:gpl2+))) + +(define-public r-acrt + (package + (name "r-acrt") + (version "1.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "acrt" version)) + (sha256 + (base32 + "0y9ndcq8ffpfrv7w9rikm4zn68jpsj6baqisq9kp2433xrwzdb6s")))) + (properties `((upstream-name . "acrt"))) + (build-system r-build-system) + (propagated-inputs + `(("r-rcpp" ,r-rcpp) + ("r-rcppeigen" ,r-rcppeigen) + ("r-sandwich" ,r-sandwich))) + (home-page "https://cran.r-project.org/web/packages/acrt/") + (synopsis "Autocorrelation robust testing") + (description + "This package provides functions for testing affine hypotheses on the +regression coefficient vector in regression models with autocorrelated +errors.") + (license license:gpl2))) + +(define-public r-acs + (package + (name "r-acs") + (version "2.1.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "acs" version)) + (sha256 + (base32 + "0ajw9rf8l8akcvgqvbxjvryc6wjx74521xyxswz2b0bky3m6kah5")))) + (properties `((upstream-name . "acs"))) + (build-system r-build-system) + (propagated-inputs + `(("r-httr" ,r-httr) + ("r-plyr" ,r-plyr) + ("r-rcpp" ,r-rcpp) + ("r-stringr" ,r-stringr) + ("r-xml" ,r-xml))) + (home-page "http://dusp.mit.edu/faculty/ezra-glenn") + (synopsis "Work with data from the US Census") + (description + "This package provides a general toolkit for downloading, managing, +analyzing, and presenting data from the +@url{https://www.census.gov/data/developers/data-sets.html, U.S. Census}, +including SF1 (Decennial short-form), SF3 (Decennial long-form), and the +American Community Survey (ACS). Confidence intervals provided with ACS data +are converted to standard errors to be bundled with estimates in complex +@code{acs} objects. The package provides new methods to conduct standard +operations on @code{acs} objects and present/plot data in statistically +appropriate ways.") + (license license:gpl3))) + +(define-public r-acss-data + (package + (name "r-acss-data") + (version "1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "acss.data" version)) + (sha256 + (base32 + "09kl4179ipr8bq19g89xcdi1xxs397zcx5cvgp6viy8gn687ilgv")))) + (properties `((upstream-name . "acss.data"))) + (build-system r-build-system) + (home-page "http://complexitycalculator.com/methodology.html") + (synopsis "Data for algorithmic complexity of short strings") + (description + "This is a data only package providing the algorithmic complexity of +short strings, computed using the coding theorem method. For a given set of +symbols in a string, all possible or a large number of random samples of +Turing machines with a given number of states (e.g., 5) and number of symbols +corresponding to the number of symbols in the strings were simulated until +they reached a halting state or failed to end. This package contains data on +4.5 million strings from length 1 to 12 simulated on Turing machines with 2, +4, 5, 6, and 9 symbols. The complexity of the string corresponds to the +distribution of the halting states.") + (license license:gpl2+))) + +(define-public r-acss + (package + (name "r-acss") + (version "0.2-5") + (source + (origin + (method url-fetch) + (uri (cran-uri "acss" version)) + (sha256 + (base32 + "0cqa60544f58l5qd7h6xmsir40b9hqnq6pqgd5hfx2j2l5n7qhmk")))) + (properties `((upstream-name . "acss"))) + (build-system r-build-system) + (propagated-inputs + `(("r-acss-data" ,r-acss-data) + ("r-zoo" ,r-zoo))) + (home-page "http://complexitycalculator.com/methodology.html") + (synopsis "Algorithmic complexity for short strings") + (description + "The main purpose of this package is to provide the algorithmic +complexity for short strings, an approximation of the Kolmogorov Complexity of +a short string using the coding theorem method. While the database containing +the complexity is provided in the data only package @code{acss.data}, this +package provides functions accessing the data such as @code{prob_random} +returning the posterior probability that a given string was produced by a +random process. In addition, two traditional (but problematic) measures of +complexity are also provided: entropy and change complexity.") + (license license:gpl2+))) + +(define-public r-acswr + (package + (name "r-acswr") + (version "1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ACSWR" version)) + (sha256 + (base32 + "195vjrkang5cl7gwsna0aq4p0h4jym9xg9yh94bnf8vq6wf8j83n")))) + (properties `((upstream-name . "ACSWR"))) + (build-system r-build-system) + (propagated-inputs + `(("r-mass" ,r-mass))) + (home-page "https://cran.r-project.org/web/packages/ACSWR/") + (synopsis "Companion package for the book \"A Course in Statistics with R\"") + (description + "This is a companion package for the book \"A Course in Statistics with +R\" (ISBN 978-1-119-15272-9.)") + (license license:gpl2))) + +(define-public r-alabama + (package + (name "r-alabama") + (version "2015.3-1") + (source + (origin + (method url-fetch) + (uri (cran-uri "alabama" version)) + (sha256 + (base32 + "0mlgk929gdismikwx4k2ndqq57nnqj7mlgvd3479b214hksgq036")))) + (properties `((upstream-name . "alabama"))) + (build-system r-build-system) + (propagated-inputs `(("r-numderiv" ,r-numderiv))) + (home-page "https://cran.r-project.org/web/packages/alabama/") + (synopsis "Constrained nonlinear optimization") + (description + "Alabama stands for Augmented Lagrangian Adaptive Barrier Minimization +Algorithm; it is used for optimizing smooth nonlinear objective functions with +constraints. Linear or nonlinear equality and inequality constraints are +allowed.") + (license license:gpl2+))) + +(define-public r-gdina + (package + (name "r-gdina") + (version "2.7.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "GDINA" version)) + (sha256 + (base32 + "0875xfbm36gqzr0116xzlbm8rlff85rybr4s4hjzfflfvjdhgvfx")))) + (properties `((upstream-name . "GDINA"))) + (build-system r-build-system) + (propagated-inputs + `(("r-alabama" ,r-alabama) + ("r-ggplot2" ,r-ggplot2) + ("r-mass" ,r-mass) + ("r-nloptr" ,r-nloptr) + ("r-numderiv" ,r-numderiv) + ("r-rcpp" ,r-rcpp) + ("r-rcpparmadillo" ,r-rcpparmadillo) + ("r-rsolnp" ,r-rsolnp) + ("r-shiny" ,r-shiny) + ("r-shinydashboard" ,r-shinydashboard))) + (home-page "https://github.com/Wenchao-Ma/GDINA") + (synopsis "Generalized DINA model framework") + (description + "This package provides a set of psychometric tools for cognitive +diagnosis modeling based on the generalized deterministic inputs, noisy and +gate (G-DINA) model by de la Torre (2011) @url{doi:10.1007/s11336-011-9207-7} +and its extensions, including the sequential G-DINA model by Ma and de la +Torre (2016) @url{doi:10.1111/bmsp.12070} for polytomous responses, and the +polytomous G-DINA model by Chen and de la Torre +@url{doi:10.1177/0146621613479818} for polytomous attributes. Joint attribute +distribution can be independent, saturated, higher-order, loglinear smoothed +or structured. Q-matrix validation, item and model fit statistics, model +comparison at test and item level and differential item functioning can also +be conducted. A graphical user interface is also provided.") + (license license:gpl3))) + +(define-public r-actcd + (package + (name "r-actcd") + (version "1.2-0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ACTCD" version)) + (sha256 + (base32 + "0mzjxxr2zfdidw8ibh6w8mvpkw3q3nvngqi05g9ind26ckvk053p")))) + (properties `((upstream-name . "ACTCD"))) + (build-system r-build-system) + (propagated-inputs + `(("r-gdina" ,r-gdina) + ("r-r-methodss3" ,r-r-methodss3))) + (native-inputs + `(("gfortran" ,gfortran))) + (home-page "https://cran.r-project.org/web/packages/ACTCD/") + (synopsis "Asymptotic classification theory for cognitive diagnosis") + (description + "This is a package supporting cluster analysis for cognitive diagnosis +based on the Asymptotic Classification Theory (Chiu, Douglas & Li, 2009; +@url{doi:10.1007/s11336-009-9125-0}). Given the sample statistic of +sum-scores, cluster analysis techniques can be used to classify examinees into +latent classes based on their attribute patterns. In addition to the +algorithms used to classify data, three labeling approaches are proposed to +label clusters so that examinees' attribute profiles can be obtained.") + (license license:gpl2+))) + +(define-public r-ineq + (package + (name "r-ineq") + (version "0.2-13") + (source + (origin + (method url-fetch) + (uri (cran-uri "ineq" version)) + (sha256 + (base32 + "09fsxyrh0j7mwmb5hkhmrzgcy7kf85jxkh7zlwpgqgcsyl1n91z0")))) + (properties `((upstream-name . "ineq"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/ineq/") + (synopsis "Measuring inequality, concentration, and poverty") + (description + "This package provides tools for measuring inequality, concentration, and +poverty measures. It provides both empirical and theoretical Lorenz curves.") + ;; Either of these two versions. + (license (list license:gpl2 license:gpl3)))) + +(define-public r-actfrag + (package + (name "r-actfrag") + (version "0.1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ActFrag" version)) + (sha256 + (base32 + "06l5a679j6289008ls57v420mnzpq9a4ln7svi5bh0vpvws7sr9d")))) + (properties `((upstream-name . "ActFrag"))) + (build-system r-build-system) + (propagated-inputs + `(("r-accelerometry" ,r-accelerometry) + ("r-dplyr" ,r-dplyr) + ("r-ineq" ,r-ineq) + ("r-survival" ,r-survival) + ("r-tidyr" ,r-tidyr))) + (home-page "https://github.com/junruidi/ActFrag") + (synopsis "Activity fragmentation metrics extraction") + (description + "This package provides functions to extract commonly used fragmentation +metrics to quantify time accumulation strategies based on minute level +actigraphy-measured activity counts data.") + (license license:gpl3))) + +(define-public r-fda + (package + (name "r-fda") + (version "2.4.8") + (source + (origin + (method url-fetch) + (uri (cran-uri "fda" version)) + (sha256 + (base32 + "0n39rzbhg1hipzn51rzmbchn2358qgapg08iv7lmiqj5y7i9qns2")))) + (properties `((upstream-name . "fda"))) + (build-system r-build-system) + (propagated-inputs + `(("r-matrix" ,r-matrix))) + (home-page "http://www.functionaldata.org") + (synopsis "Functional data analysis") + (description + "These functions were developed to support functional data analysis as +described in Ramsay, J. O. and Silverman, B. W. (2005) Functional Data +Analysis. The package includes data sets and script files working many +examples.") + (license license:gpl2+))) + +(define-public r-actigraphy + (package + (name "r-actigraphy") + (version "1.3.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "Actigraphy" version)) + (sha256 + (base32 + "0y0ccmxhdfhdmi4k6pbfvnqknkqbgvfsf2qf7z7rc4xpfgym6574")))) + (properties `((upstream-name . "Actigraphy"))) + (build-system r-build-system) + (propagated-inputs + `(("r-fda" ,r-fda) + ("r-sdmtools" ,r-sdmtools))) + (home-page "https://cran.r-project.org/web/packages/Actigraphy/") + (synopsis "Actigraphy data analysis") + (description + "This package provides tools for functional linear modeling and analysis +of actigraphy data.") + (license license:asl2.0))) + +(define-public r-activedriver + (package + (name "r-activedriver") + (version "1.0.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ActiveDriver" version)) + (sha256 + (base32 + "10c7ga48fwvpd5mc4dqiyw4kc2l0iz5qn4hg7xk15r1qmm5rsipa")))) + (properties `((upstream-name . "ActiveDriver"))) + (build-system r-build-system) + (propagated-inputs + `(("r-mass" ,r-mass))) + (home-page "https://cran.r-project.org/web/packages/ActiveDriver/") + (synopsis "Tools for finding cancer driver proteins") + (description + "This package provides a mutation analysis tool that discovers cancer +driver genes with frequent mutations in protein signalling sites such as +post-translational modifications (phosphorylation, ubiquitination, etc). The +Poisson generalized linear regression model identifies genes where cancer +mutations in signalling sites are more frequent than expected from the +sequence of the entire gene. Integration of mutations with signalling +information helps find new driver genes and propose candidate mechanisms to +known drivers.") + (license license:gpl2+))) + +(define-public r-activitycounts + (package + (name "r-activitycounts") + (version "0.1.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "activityCounts" version)) + (sha256 + (base32 + "0zgxr2sk3a8kmygfxx1p5hnrfwdkxx7php6jlrhm8wv6052ck8jz")))) + (properties + `((upstream-name . "activityCounts"))) + (build-system r-build-system) + (propagated-inputs + `(("r-lubridate" ,r-lubridate) + ("r-magrittr" ,r-magrittr) + ("r-seewave" ,r-seewave) + ("r-signal" ,r-signal) + ("r-tibble" ,r-tibble))) + (home-page "https://github.com/walkabillylab/activityCounts") + (synopsis "Generate ActiLife counts") + (description + "ActiLife generates activity counts from data collected by Actigraph +accelerometers. Actigraph is one of the most common research-grade +accelerometers. There is considerable research validating and developing +algorithms for human activity using ActiLife counts. Unfortunately, ActiLife +counts are proprietary and difficult to implement if researchers use different +accelerometer brands. The code creates ActiLife counts from raw acceleration +data for different accelerometer brands.") + (license license:gpl3))) + +(define-public r-activityindex + (package + (name "r-activityindex") + (version "0.3.6") + (source + (origin + (method url-fetch) + (uri (cran-uri "ActivityIndex" version)) + (sha256 + (base32 + "14k6d78s15j7kb7jhixf4msrdjdl28d0r264cbvy41p8dkq7ysvk")))) + (properties `((upstream-name . "ActivityIndex"))) + (build-system r-build-system) + (propagated-inputs + `(("r-data-table" ,r-data-table) + ("r-matrixstats" ,r-matrixstats) + ("r-r-utils" ,r-r-utils))) + (home-page "https://cran.r-project.org/web/packages/ActivityIndex/") + (synopsis "Activity Index calculation using raw accelerometry data") + (description + "This is a package to read raw accelerometry from GT3X+ accelerometry +data and plain table data to calculate the Activity Index from Bai et +al. (2016) @url{doi:10.1371/journal.pone.0160644}.") + (license license:gpl3))) + +(define-public r-activpal + (package + (name "r-activpal") + (version "0.1.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "activPAL" version)) + (sha256 + (base32 + "1h6hp5z89ji73gdzxy1dgbfwjysiy5lvcqh90xagpb7sa7ahs3na")))) + (properties `((upstream-name . "activPAL"))) + (build-system r-build-system) + (propagated-inputs + `(("r-devtools" ,r-devtools) + ("r-dplyr" ,r-dplyr) + ("r-ggplot2" ,r-ggplot2) + ("r-lubridate" ,r-lubridate) + ("r-magrittr" ,r-magrittr) + ("r-tidyr" ,r-tidyr))) + (home-page "https://cran.r-project.org/web/packages/activPAL") + (synopsis "Processing and chart generation from activPAL events files") + (description + "This package contains functions to generate pre-defined summary +statistics from activPAL events files. The package also contains functions to +produce informative graphics that visualize physical activity behaviour and +trends. This includes generating graphs that align physical activity +behaviour with additional time based observations described by other data +sets, such as sleep diaries and continuous glucose monitoring data.") + (license license:gpl3))) + +(define-public r-activpalprocessing + (package + (name "r-activpalprocessing") + (version "1.0.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "activpalProcessing" version)) + (sha256 + (base32 + "1y0bjx2qx53iy930y9iww4q1yzjj8y16cwgixk1mq3w4g1f116d1")))) + (properties + `((upstream-name . "activpalProcessing"))) + (build-system r-build-system) + (propagated-inputs + `(("r-chron" ,r-chron))) + (home-page "https://cran.r-project.org/web/packages/activpalProcessing/") + (synopsis "Process activPAL events files") + (description + "This package performs estimation of physical activity and sedentary +behavior variables from activPAL events files.") + ;; Either version of the GPL. + (license (list license:gpl2 license:gpl3)))) + +(define-public r-actogrammr + (package + (name "r-actogrammr") + (version "0.2.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "actogrammr" version)) + (sha256 + (base32 + "1jzvarmd41yqlrkagzlc8m19n5mn0w0b36fy50lyvgrfsafjfbqa")))) + (properties `((upstream-name . "actogrammr"))) + (build-system r-build-system) + (propagated-inputs + `(("r-dplyr" ,r-dplyr) + ("r-ggplot2" ,r-ggplot2) + ("r-lubridate" ,r-lubridate) + ("r-readr" ,r-readr) + ("r-tidyr" ,r-tidyr))) + (home-page "https://cran.r-project.org/web/packages/actogrammr/") + (synopsis "Read in activity data and plot actograms") + (description + "Read in activity measurements from standard file formats used by +circadian rhythm researchers, currently only ClockLab format, and process and +plot the data. The central type of plot is the actogram, as first described +in \"Activity and distribution of certain wild mice in relation to biotic +communities\" by MS Johnson (1926) @url{doi:10.2307/1373575}.") + (license license:gpl3))) + +(define-public r-expint + (package + (name "r-expint") + (version "0.1-6") + (source + (origin + (method url-fetch) + (uri (cran-uri "expint" version)) + (sha256 + (base32 + "0iai25cglcdnf44d2d1fz1xpw4q600my4zq4493fk4cs5673mlf7")))) + (properties `((upstream-name . "expint"))) + (build-system r-build-system) + (home-page "https://gitlab.com/vigou3/expint") + (synopsis "Exponential integral and incomplete Gamma function") + (description + "This package provides the exponential integrals @code{E_1(x)}, +@code{E_2(x)}, @code{E_n(x)} and @code{Ei(x)}, and the incomplete gamma +function @code{G(a, x)} defined for negative values of its first argument. +The package also gives easy access to the underlying C routines through an +API; see the package vignette for details.") + (license license:gpl2+))) + +(define-public r-actuar + (package + (name "r-actuar") + (version "2.3-3") + (source + (origin + (method url-fetch) + (uri (cran-uri "actuar" version)) + (sha256 + (base32 + "0aw3hlan5y22mdqk1wvnw9ksqhwp4yy5hi0dpv21p7s0hyxhphih")))) + (properties `((upstream-name . "actuar"))) + (build-system r-build-system) + (propagated-inputs `(("r-expint" ,r-expint))) + (home-page "https://gitlab.com/vigou3/actuar") + (synopsis "Actuarial functions and heavy tailed distributions") + (description + "This package provides functions and data sets for actuarial science: +modeling of loss distributions; risk theory and ruin theory; simulation of +compound models, discrete mixtures and compound hierarchical models; +credibility theory. It boasts support for many additional probability +distributions to model insurance loss amounts and loss frequency: 19 +continuous heavy tailed distributions; the Poisson-inverse Gaussian discrete +distribution; zero-truncated and zero-modified extensions of the standard +discrete distributions. It also supports phase-type distributions commonly +used to compute ruin probabilities.") + (license license:gpl2+))) + +(define-public r-bmp + (package + (name "r-bmp") + (version "0.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "bmp" version)) + (sha256 + (base32 + "0jd67r11bn98hjwgyr6gas423787xy7ji2hq7ay80blkkcj91xxx")))) + (properties `((upstream-name . "bmp"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/bmp/") + (synopsis "Read Bitmap (BMP) images") + (description + "This package provides pure R tools to read BMP format images. It is +currently limited to 8 bit greyscale images and 24, 32 bit (A)RGB images.") + (license license:gpl2+))) + +(define-public r-readbitmap + (package + (name "r-readbitmap") + (version "0.1.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "readbitmap" version)) + (sha256 + (base32 + "14825906l326w59g6apy00j55jg3h5kx2r6s031f4gdkbrc7szbk")))) + (properties `((upstream-name . "readbitmap"))) + (build-system r-build-system) + (inputs + `(("libjpeg" ,libjpeg) + ("libpng" ,libpng))) + (propagated-inputs + `(("r-bmp" ,r-bmp) + ("r-jpeg" ,r-jpeg) + ("r-png" ,r-png) + ("r-tiff" ,r-tiff))) + (home-page "https://github.com/jefferis/readbitmap") + (synopsis "Unified interface to read bitmap images (BMP, JPEG, PNG, TIFF)") + (description + "This package provides tools to identify and read BMP, JPEG, PNG, and +TIFF format bitmap images. Identification defaults to the use of the magic +number embedded in the file rather than the file extension.") + (license license:gpl2+))) + +(define-public r-imager + (package + (name "r-imager") + (version "0.41.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "imager" version)) + (sha256 + (base32 + "19fqgjhg04garbipx20g72h9dd6k0jj4ac48nby6km4h665vrs4v")))) + (properties `((upstream-name . "imager"))) + (build-system r-build-system) + (inputs + `(("fftw" ,fftw) + ("libtiff" ,libtiff) + ("libx11" ,libx11) + ("zlib" ,zlib))) + (propagated-inputs + `(("r-cairo" ,r-cairo) + ("r-downloader" ,r-downloader) + ("r-igraph" ,r-igraph) + ("r-jpeg" ,r-jpeg) + ("r-magrittr" ,r-magrittr) + ("r-plyr" ,r-plyr) + ("r-png" ,r-png) + ("r-purrr" ,r-purrr) + ("r-rcpp" ,r-rcpp) + ("r-readbitmap" ,r-readbitmap) + ("r-stringr" ,r-stringr))) + (native-inputs `(("pkg-config" ,pkg-config))) + (home-page "http://dahtah.github.io/imager") + (synopsis "Image processing library") + (description + "This is a package for fast image processing for images in up to 4 +dimensions (two spatial dimensions, one time/depth dimension, one color +dimension). It provides most traditional image processing tools (filtering, +morphology, transformations, etc.) as well as various functions for easily +analyzing image data using R. The package wraps @url{http://cimg.eu, CImg}, a +simple, modern C++ library for image processing.") + (license license:lgpl3))) + +(define-public r-acuityview + (package + (name "r-acuityview") + (version "0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "AcuityView" version)) + (sha256 + (base32 + "0f0iclmnwdc8ixiiai4svk4x1g3pjy7dhm3cm58fv6ckx12d3d2l")))) + (properties `((upstream-name . "AcuityView"))) + (build-system r-build-system) + (propagated-inputs + `(("r-fftwtools" ,r-fftwtools) + ("r-imager" ,r-imager) + ("r-plotrix" ,r-plotrix))) + (home-page "https://cran.r-project.org/web/packages/AcuityView/") + (synopsis "Display scenes as seen by an animal with less acute vision") + (description + "This package provides a simple method for representing a visual scene as +it may be seen by an animal with less acute vision.") + (license license:gpl2+))) + +(define-public r-adabag + (package + (name "r-adabag") + (version "4.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "adabag" version)) + (sha256 + (base32 + "109wrl1pwvmyv2l909hrvk7dg4aa9pv449mvdycp50zwrsw9w0a7")))) + (properties `((upstream-name . "adabag"))) + (build-system r-build-system) + (propagated-inputs + `(("r-caret" ,r-caret) + ("r-doparallel" ,r-doparallel) + ("r-foreach" ,r-foreach) + ("r-rpart" ,r-rpart))) + (home-page "https://cran.r-project.org/web/packages/adabag/") + (synopsis "Multiclass AdaBoost.M1, SAMME and Bagging") + (description + "This package implements Freund and Schapire's Adaboost.M1 algorithm and +Breiman's Bagging algorithm using classification trees as individual +classifiers. Once these classifiers have been trained, they can be used to +predict on new data. Also, cross validation estimation of the error can be +done.") + (license license:gpl2+))) + +(define-public r-adagio + (package + (name "r-adagio") + (version "0.7.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "adagio" version)) + (sha256 + (base32 + "1h9l0ddrxq8y35iy9hdkxdvdwsqpnpkzzbkbwwhm4380lq1m7a3k")))) + (properties `((upstream-name . "adagio"))) + (build-system r-build-system) + (native-inputs `(("gfortran" ,gfortran))) + (home-page "https://cran.r-project.org/web/packages/adagio/") + (synopsis "Discrete and global optimization routines") + (description + "This package provides methods and algorithms for discrete optimization, +e.g. knapsack and subset sum procedures, derivative-free Nelder-Mead and +Hooke-Jeeves minimization, and some (evolutionary) global optimization +functions.") + (license license:gpl3+))) + +(define-public r-univoutl + (package + (name "r-univoutl") + (version "0.1-5") + (source + (origin + (method url-fetch) + (uri (cran-uri "univOutl" version)) + (sha256 + (base32 + "193wrpkvgmlrx43nag8w3ivrlqm37nm6g86wcvd3bgw3hchs70gi")))) + (properties `((upstream-name . "univOutl"))) + (build-system r-build-system) + (propagated-inputs + `(("r-hmisc" ,r-hmisc) + ("r-robustbase" ,r-robustbase))) + (home-page "https://github.com/marcellodo/univOutl") + (synopsis "Detection of univariate outliers") + (description + "This package provides well-known outlier detection techniques in the +univariate case. Methods to deal with skewed distribution are included too. +The Hidiroglou-Berthelot (1986) method to search for outliers in ratios of +historical data is implemented as well. When available, survey weights can be +used in outliers detection.") + (license license:gpl2+))) + +(define-public r-tolerance + (package + (name "r-tolerance") + (version "1.3.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "tolerance" version)) + (sha256 + (base32 + "17qh4ad1f3fbcpwlxxqh8qr9bnwjcl4yxk0l3fkbr6b2l4rc5p86")))) + (properties `((upstream-name . "tolerance"))) + (build-system r-build-system) + (propagated-inputs + `(("r-rgl" ,r-rgl))) + (home-page "https://cran.r-project.org/web/packages/tolerance/") + (synopsis "Statistical tolerance intervals and regions") + (description + "This package provides functions for estimating tolerance +limits (intervals) for various univariate distributions (binomial, Cauchy, +discrete Pareto, exponential, two-parameter exponential, extreme value, +hypergeometric, Laplace, logistic, negative binomial, negative hypergeometric, +normal, Pareto, Poisson-Lindley, Poisson, uniform, and Zipf-Mandelbrot), +Bayesian normal tolerance limits, multivariate normal tolerance regions, +nonparametric tolerance intervals, tolerance bands for regression +settings (linear regression, nonlinear regression, nonparametric regression, +and multivariate regression), and analysis of variance tolerance intervals. +Visualizations are also available for most of these settings.") + (license license:gpl2+))) + +(define-public r-additivitytests + (package + (name "r-additivitytests") + (version "1.1-4") + (source + (origin + (method url-fetch) + (uri (cran-uri "additivityTests" version)) + (sha256 + (base32 + "048ds90wqjdjy1nyhna3m06asdklbh8sx1n556kss2j1r1pma1sw")))) + (properties + `((upstream-name . "additivityTests"))) + (build-system r-build-system) + (home-page "https://github.com/simecek/additivityTests") + (synopsis "Additivity tests in the two way Anova with single sub-class numbers") + (description + "This package provides an implementation of the Tukey, Mandel, +Johnson-Graybill, LBI, Tusell and modified Tukey non-additivity tests.") + (license license:gpl3))) + +(define-public r-flexclust + (package + (name "r-flexclust") + (version "1.4-0") + (source + (origin + (method url-fetch) + (uri (cran-uri "flexclust" version)) + (sha256 + (base32 + "0x7wxk8y46ndyz6fdacym0rd6p9wh3pcfr28chjcg5d7fm849zl2")))) + (properties `((upstream-name . "flexclust"))) + (build-system r-build-system) + (propagated-inputs + `(("r-class" ,r-class) + ("r-lattice" ,r-lattice) + ("r-modeltools" ,r-modeltools))) + (home-page "https://cran.r-project.org/web/packages/flexclust/") + (synopsis "Flexible cluster algorithms") + (description + "The main function @code{kcca} implements a general framework for +k-centroids cluster analysis supporting arbitrary distance measures and +centroid computation. Further cluster methods include hard competitive +learning, neural gas, and QT clustering. There are numerous visualization +methods for cluster results (neighborhood graphs, convex cluster hulls, +barcharts of centroids, ...), and bootstrap methods for the analysis of +cluster stability.") + (license license:gpl2))) + +(define-public r-biclust + (package + (name "r-biclust") + (version "2.0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "biclust" version)) + (sha256 + (base32 + "1y5n6wfa1lx88ck3x09rcg0dh3pw89225h85hmq2la1s1fpa48i0")))) + (properties `((upstream-name . "biclust"))) + (build-system r-build-system) + (propagated-inputs + `(("r-additivitytests" ,r-additivitytests) + ("r-colorspace" ,r-colorspace) + ("r-flexclust" ,r-flexclust) + ("r-ggplot2" ,r-ggplot2) + ("r-lattice" ,r-lattice) + ("r-mass" ,r-mass) + ("r-tidyr" ,r-tidyr))) + (home-page "https://cran.r-project.org/web/packages/biclust/") + (synopsis "BiCluster algorithms") + (description + "The main function @code{biclust()} provides several algorithms to find +biclusters in two-dimensional data, spectral, plaid model, xmotifs, and bimax. +In addition, the package provides methods for data +preprocessing (normalization and discretization), visualization, and +validation of bicluster solutions.") + (license license:gpl3))) + +(define-public r-icge + (package + (name "r-icge") + (version "0.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "ICGE" version)) + (sha256 + (base32 + "0xin7zml1nbygyi08hhg3wwr2jr1zcsvrlgia89zp4xanxlzgaqa")))) + (properties `((upstream-name . "ICGE"))) + (build-system r-build-system) + (propagated-inputs + `(("r-cluster" ,r-cluster) + ("r-mass" ,r-mass))) + (home-page "https://cran.r-project.org/web/packages/ICGE/") + (synopsis "Cluster estimation and identification of atypical units") + (description + "ICGE is a package that helps to estimate the number of real clusters in +data as well as to identify atypical units. The underlying methods are based +on distances rather than on unit x variables.") + (license license:gpl2+))) + +(define-public r-depth + (package + (name "r-depth") + (version "2.1-1.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "depth" version)) + (sha256 + (base32 + "0szy0027nh4ps1z919i740i50app5q7cfyg1fj7pdyl45nbl8k6m")))) + (properties `((upstream-name . "depth"))) + (build-system r-build-system) + (propagated-inputs + `(("r-abind" ,r-abind) + ("r-circular" ,r-circular) + ("r-rgl" ,r-rgl))) + (native-inputs + `(("gfortran" ,gfortran))) + (home-page "https://cran.r-project.org/web/packages/depth/") + (synopsis "Nonparametric depth functions for multivariate analysis") + (description + "This package provides tools for depth functions methodology applied to +multivariate analysis. Besides allowing calculation of depth values and +depth-based location estimators, the package includes functions or drawing +contour plots and perspective plots of depth functions. Euclidian and +spherical depths are supported.") + (license license:gpl2))) + +(define-public r-archetypes + (package + (name "r-archetypes") + (version "2.2-0.1") + (source + (origin + (method url-fetch) + (uri (cran-uri "archetypes" version)) + (sha256 + (base32 + "0ibxsr173ib77gjhid91m85s8gjii4mi2w3d52q5301igv20p7r0")))) + (properties `((upstream-name . "archetypes"))) + (build-system r-build-system) + (propagated-inputs + `(("r-modeltools" ,r-modeltools) + ("r-nnls" ,r-nnls))) + (home-page "https://cran.r-project.org/web/packages/archetypes") + (synopsis "Archetypal analysis") + (description + "The main function @code{archetypes} implements a framework for +archetypal analysis supporting arbitrary problem solving mechanisms for the +different conceptual parts of the algorithm.") + (license license:gpl2+))) + +(define-public r-shapes + (package + (name "r-shapes") + (version "1.2.5") + (source + (origin + (method url-fetch) + (uri (cran-uri "shapes" version)) + (sha256 + (base32 + "0gfpdydfysp5mwg7qmkn73s67gvh2szb40mzqrx97h41ijgcgd8s")))) + (properties `((upstream-name . "shapes"))) + (build-system r-build-system) + (propagated-inputs + `(("r-mass" ,r-mass) + ("r-minpack-lm" ,r-minpack-lm) + ("r-rgl" ,r-rgl) + ("r-scatterplot3d" ,r-scatterplot3d))) + (home-page "http://www.maths.nottingham.ac.uk/~ild/shapes") + (synopsis "Statistical shape analysis") + (description + "This package provides routines for the statistical analysis of landmark +shapes, including Procrustes analysis, graphical displays, principal +components analysis, permutation and bootstrap tests, thin-plate spline +transformation grids and comparing covariance matrices. See Dryden, I.L. and +Mardia, K.V. (2016). Statistical shape analysis, with Applications in R (2nd +Edition), John Wiley and Sons.") + (license license:gpl2))) + +(define-public r-anthropometry + (package + (name "r-anthropometry") + (version "1.13") + (source + (origin + (method url-fetch) + (uri (cran-uri "Anthropometry" version)) + (sha256 + (base32 + "1f568ri1s6psaby8y737vrkarbjg64v89d4jyw23hy17apdmszr8")))) + (properties `((upstream-name . "Anthropometry"))) + (build-system r-build-system) + (propagated-inputs + `(("r-archetypes" ,r-archetypes) + ("r-biclust" ,r-biclust) + ("r-cluster" ,r-cluster) + ("r-depth" ,r-depth) + ("r-fnn" ,r-fnn) + ("r-icge" ,r-icge) + ("r-nnls" ,r-nnls) + ("r-rgl" ,r-rgl) + ("r-shapes" ,r-shapes))) + (home-page "https://cran.r-project.org/web/packages/Anthropometry/") + (synopsis "Statistical methods for anthropometric data") + (description + "This package provides statistical methods especially developed to +analyze anthropometric data. These methods are aimed at providing effective +solutions to some commons problems related to Ergonomics and Anthropometry. +They are based on clustering, the statistical concept of data depth, +statistical shape analysis and archetypal analysis.") + (license license:gpl2+))) + +(define-public r-adamethods + (package + (name "r-adamethods") + (version "1.2") + (source + (origin + (method url-fetch) + (uri (cran-uri "adamethods" version)) + (sha256 + (base32 + "0mp73zh5x6h18gv29v981kb9n632kb58lvlcxwr6vcvrx393nrxh")))) + (properties `((upstream-name . "adamethods"))) + (build-system r-build-system) + (propagated-inputs + `(("r-anthropometry" ,r-anthropometry) + ("r-archetypes" ,r-archetypes) + ("r-fnn" ,r-fnn) + ("r-foreach" ,r-foreach) + ("r-nnls" ,r-nnls) + ("r-tolerance" ,r-tolerance) + ("r-univoutl" ,r-univoutl))) + (home-page "https://cran.r-project.org/web/packages/adamethods/") + (synopsis "Archetypoid algorithms and anomaly detection") + (description + "This package is a collection of several algorithms to obtain +archetypoids with small and large databases and with both classical +multivariate data and functional data (univariate and multivariate). Some of +these algorithms also allow to detect anomalies (outliers).") + (license license:gpl2+))) + +(define-public r-idpmisc + (package + (name "r-idpmisc") + (version "1.1.19") + (source + (origin + (method url-fetch) + (uri (cran-uri "IDPmisc" version)) + (sha256 + (base32 + "13qcvfm703frs367paddz1wq9k3p17f9p5347m56bhky5hjkaphd")))) + (properties `((upstream-name . "IDPmisc"))) + (build-system r-build-system) + (propagated-inputs + `(("r-lattice" ,r-lattice))) + (home-page "https://cran.r-project.org/web/packages/IDPmisc/") + (synopsis "Functions for data analyses and visualization") + (description + "This package provides different high-level graphics functions for +displaying large datasets, displaying circular data in a very flexible way, +finding local maxima, brewing color ramps, drawing nice arrows, zooming +2D-plots, creating figures with differently colored margin and plot region. +In addition, the package contains auxiliary functions for data manipulation +like omitting observations with irregular values or selecting data by logical +vectors, which include NAs. Other functions are especially useful in +spectroscopy and analyses of environmental data: robust baseline fitting, +finding peaks in spectra, converting humidity measures.") + (license license:gpl3+))) + +(define-public r-qqman + (package + (name "r-qqman") + (version "0.1.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "qqman" version)) + (sha256 + (base32 + "1v9s9ag1hfb47py87wb2nad4mbsfx35832hdmrh5kxrb2f11zl1s")))) + (properties `((upstream-name . "qqman"))) + (build-system r-build-system) + (propagated-inputs + `(("r-calibrate" ,r-calibrate))) + (home-page "https://cran.r-project.org/web/packages/qqman/") + (synopsis "Q-Q and Manhattan plots for GWAS data") + (description + "This package allows you to create Q-Q and Manhattan plots for GWAS data +from PLINK results.") + (license license:gpl3))) + +(define-public r-ggplot-multistats + (package + (name "r-ggplot-multistats") + (version "1.0.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "ggplot.multistats" version)) + (sha256 + (base32 + "1afzfa86vc484bcwpg7m1ky03jpax584rigzgai8w06pifkmz0il")))) + (properties + `((upstream-name . "ggplot.multistats"))) + (build-system r-build-system) + (propagated-inputs + `(("r-ggplot2" ,r-ggplot2) + ("r-hexbin" ,r-hexbin) + ("r-rlang" ,r-rlang) + ("r-scales" ,r-scales))) + (home-page "https://github.com/flying-sheep/ggplot.multistats") + (synopsis "Multiple summary statistics for binned stats/geometries") + (description + "This package provides the ggplot binning layer @code{stat_summaries_hex()}, +which functions similar to its singular form, but allows the use of multiple +statistics per bin. Those statistics can be mapped to multiple bin +aesthetics.") + (license license:gpl3))) + +(define-public r-knn-covertree + (package + (name "r-knn-covertree") + (version "1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "knn.covertree" version)) + (sha256 + (base32 + "0msfcmwydws7q7m5jdb0dxab0nkbl7mq5llg6v3r4qrnlvrdggvz")))) + (properties `((upstream-name . "knn.covertree"))) + (build-system r-build-system) + (propagated-inputs + `(("r-matrix" ,r-matrix) + ("r-rcpp" ,r-rcpp) + ("r-rcppeigen" ,r-rcppeigen))) + (home-page "https://github.com/flying-sheep/knn.covertree") + (synopsis "Accurate kNN Implementation with multiple distance measures") + (description + "Similarly to the FNN package, this package allows calculation of the k +nearest neighbors (kNN) of a data matrix. The implementation is based on +cover trees introduced by Alina Beygelzimer, Sham Kakade, and John +Langford (2006) @url{doi:10.1145/1143844.1143857}.") + (license license:agpl3+))) + +(define-public r-poibin + (package + (name "r-poibin") + (version "1.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "poibin" version)) + (sha256 + (base32 + "1rllgmk7yanb5amysl33kmi11lx86q5kqblyb8qqb3ckj2w4jhm2")))) + (properties `((upstream-name . "poibin"))) + (build-system r-build-system) + (home-page "https://cran.r-project.org/web/packages/poibin/") + (synopsis "Poisson binomial distribution") + (description + "This package provides an implementation of both the exact and +approximation methods for computing the @dfn{cumulative distribution +function} (CDF) of the Poisson binomial distribution. It also provides the +@dfn{probability mass function} (PMF), quantile function, and random number +generation for the Poisson binomial distribution.") + (license license:gpl2))) + +(define-public r-diagram + (package + (name "r-diagram") + (version "1.6.4") + (source + (origin + (method url-fetch) + (uri (cran-uri "diagram" version)) + (sha256 + (base32 + "0f6ffprn5k0ir1s7m9s7izc64aa17r3gnygagz5bihrlsvawaavw")))) + (properties `((upstream-name . "diagram"))) + (build-system r-build-system) + (propagated-inputs + `(("r-shape" ,r-shape))) + (home-page "https://cran.r-project.org/web/packages/diagram/") + (synopsis "Visualize simple graphs (networks) and plot flow diagrams") + (description + "This package provides tools to visualize simple graphs (networks) based +on a transition matrix, utilities to plot flow diagrams, visualizing webs, +electrical networks, etc. It also includes supporting material for the book +\"A practical guide to ecological modelling - using R as a simulation +platform\" by Karline Soetaert and Peter M.J. Herman (2009) and the book +\"Solving Differential Equations in R\" by Karline Soetaert, Jeff Cash and +Francesca Mazzia (2012).") + (license license:gpl2+))) + +(define-public r-lim + (package + (name "r-lim") + (version "1.4.6") + (source + (origin + (method url-fetch) + (uri (cran-uri "LIM" version)) + (sha256 + (base32 + "03x1gnm06bw1wrzc01110bjzd2mvjdzbc2mbrazh22jrmb32w5d8")))) + (properties `((upstream-name . "LIM"))) + (build-system r-build-system) + (propagated-inputs + `(("r-diagram" ,r-diagram) + ("r-limsolve" ,r-limsolve))) + (home-page "https://cran.r-project.org/web/packages/LIM/") + (synopsis "Linear inverse model examples and solution methods") + (description + "This package provides functions that read and solve linear inverse +problems (food web problems, linear programming problems).") + (license license:gpl2+))) + +(define-public r-shinycssloaders + (package + (name "r-shinycssloaders") + (version "0.2.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "shinycssloaders" version)) + (sha256 + (base32 + "1bpzsm7m7c366sjl1qndp4m5dg2vlm68rjgdy9n1ija9xbp0r2g4")))) + (properties + `((upstream-name . "shinycssloaders"))) + (build-system r-build-system) + (propagated-inputs + `(("r-digest" ,r-digest) + ("r-glue" ,r-glue) + ("r-shiny" ,r-shiny))) + (home-page "https://github.com/andrewsali/shinycssloaders") + (synopsis "Add CSS loading animations to Shiny outputs") + (description + "This package provides tools to create a lightweight Shiny wrapper for +the css-loaders created by Luke Hass +@url{https://github.com/lukehaas/css-loaders}. Wrapping a Shiny output will +automatically show a loader when the output is (re)calculating.") + (license license:gpl3))) + +(define-public r-rsvg + (package + (name "r-rsvg") + (version "1.3") + (source + (origin + (method url-fetch) + (uri (cran-uri "rsvg" version)) + (sha256 + (base32 + "11mccgf6hfskg45wqc114sx3qy2r494y6axdf73z6xwhs1wpm97g")))) + (properties `((upstream-name . "rsvg"))) + (build-system r-build-system) + (inputs + `(("librsvg" ,librsvg) + ("zlib" ,zlib))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "https://github.com/jeroen/rsvg#readme") + (synopsis "Render SVG images into PDF, PNG, PostScript, or Bitmap arrays") + (description + "This package allows you to render vector-based SVG images into +high-quality custom-size bitmap arrays using the librsvg2 library. The +resulting bitmap can be written to e.g. PNG, JPEG or WEBP format. In +addition, the package can convert images directly to various formats such as +PDF or PostScript.") + (license license:expat))) + +(define-public r-influencer + (package + (name "r-influencer") + (version "0.1.0") + (source + (origin + (method url-fetch) + (uri (cran-uri "influenceR" version)) + (sha256 + (base32 + "12p9362hkndlnz1rd8j2rykg57kbm6l7ks60by3rd25xg50k5jag")))) + (properties `((upstream-name . "influenceR"))) + (build-system r-build-system) + (propagated-inputs + `(("r-igraph" ,r-igraph) + ("r-matrix" ,r-matrix))) + (home-page "https://github.com/rcc-uchicago/influenceR") + (synopsis "Tools to quantify structural importance of nodes in a network") + (description + "This package provides functionality to compute various node centrality +measures on networks. Included are functions to compute betweenness +centrality (by utilizing Madduri and Bader's SNAP library), implementations of +Burt's constraint and @dfn{effective network size} (ENS) metrics, Borgatti's +algorithm to identify key players, and Valente's bridging metric. The +betweenness, Key Players, and bridging implementations are parallelized with +OpenMP.") + (license license:gpl2))) diff --git a/gnu/packages/crypto.scm b/gnu/packages/crypto.scm index e63823de2c..db39166d45 100644 --- a/gnu/packages/crypto.scm +++ b/gnu/packages/crypto.scm @@ -884,10 +884,10 @@ trivial to build for local use. Portability is emphasized over performance.") (license license:unlicense))) (define-public libsecp256k1 - (let ((commit "e34ceb333b1c0e6f4115ecbb80c632ac1042fa49")) + (let ((commit "d644dda5c9dbdecee52d1aa259235510fdc2d4ee")) (package (name "libsecp256k1") - (version (git-version "20181126" "1" commit)) + (version (git-version "20191213" "1" commit)) (source (origin (method git-fetch) (uri (git-reference @@ -895,7 +895,7 @@ trivial to build for local use. Portability is emphasized over performance.") (commit commit))) (sha256 (base32 - "0as78s179hcr3ysk3fw98k5wzabgnwri7vkkc17wg31lyz6ids6c")) + "0zmx32746khsm2cx0p3pdy3j2vkwmafvf7axiixijhgcg0xjv93i")) (file-name (git-file-name name version)))) (build-system gnu-build-system) (native-inputs diff --git a/gnu/packages/cups.scm b/gnu/packages/cups.scm index 1f8e7bd179..0f048bb682 100644 --- a/gnu/packages/cups.scm +++ b/gnu/packages/cups.scm @@ -420,14 +420,14 @@ should only be used as part of the Guix cups-pk-helper service.") (define-public hplip (package (name "hplip") - (version "3.19.11") + (version "3.19.12") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/hplip/hplip/" version "/hplip-" version ".tar.gz")) (sha256 (base32 - "0lfmym225dr4qnssglqd0gyf0nmm7jpbzkdr1s2wyknmx8z7fx9x")) + "0mdj0sqgfxjqa550adiw1gn4z9n6wcvn55slivgf0ndn5x89iwxp")) (modules '((guix build utils))) (patches (search-patches "hplip-remove-imageprocessor.patch")) (snippet diff --git a/gnu/packages/databases.scm b/gnu/packages/databases.scm index cb843672af..73b7dc7d3a 100644 --- a/gnu/packages/databases.scm +++ b/gnu/packages/databases.scm @@ -17,7 +17,7 @@ ;;; Copyright © 2016 Jan Nieuwenhuizen <janneke@gnu.org> ;;; Copyright © 2016 Andy Patterson <ajpatter@uwaterloo.ca> ;;; Copyright © 2016 Danny Milosavljevic <dannym+a@scratchpost.org> -;;; Copyright © 2016, 2017, 2018 Marius Bakke <mbakke@fastmail.com> +;;; Copyright © 2016, 2017, 2018, 2019 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2017, 2018 Julien Lepiller <julien@lepiller.eu> ;;; Copyright © 2017 Thomas Danckaert <post@thomasdanckaert.be> ;;; Copyright © 2017 Jelle Licht <jlicht@fsfe.org> @@ -125,6 +125,7 @@ #:use-module (guix build-system ruby) #:use-module (guix build-system cmake) #:use-module (guix build-system scons) + #:use-module (guix build-system trivial) #:use-module ((guix build utils) #:hide (which)) #:use-module (guix utils) #:use-module (srfi srfi-1) @@ -899,6 +900,33 @@ Language.") as a drop-in replacement of MySQL.") (license license:gpl2))) +;; TODO: mysql_install_db is broken in MariaDB. This package is here as +;; a workaround for packages that need it. Merge with 'mariadb' in the next +;; rebuild cycle. +(define-public mariadb/fixed-install-db + (hidden-package + (package/inherit + mariadb + (name "mariadb-fixed") + (native-inputs '()) + (inputs + `(("mariadb" ,mariadb) + ("mariadb:lib" ,mariadb "lib"))) + (outputs '("out")) + (build-system trivial-build-system) + (arguments + `(#:modules ((guix build utils)) + #:builder + (begin + (use-modules ((guix build utils))) + (let ((out (assoc-ref %outputs "out"))) + (copy-recursively (assoc-ref %build-inputs "mariadb") out) + (substitute* (string-append out "/bin/mysql_install_db") + (("\\$basedir/share/mysql") + (string-append (assoc-ref %build-inputs "mariadb:lib") + "/share/mysql"))) + #t))))))) + ;; Don't forget to update the other postgresql packages when upgrading this one. (define-public postgresql (package @@ -1363,14 +1391,14 @@ changes.") (define-public tdb (package (name "tdb") - (version "1.4.2") + (version "1.4.3") (source (origin (method url-fetch) (uri (string-append "https://www.samba.org/ftp/tdb/tdb-" version ".tar.gz")) (sha256 (base32 - "0jh0iqbb6pkvqrqn033w5g6gwa4bdgkvp49z0qpkk3h2wk6b4h4h")))) + "06waz0k50c7v3chd08mzp2rv7w4k4q9isbxx3vhlfpx1vy9q61f8")))) (build-system gnu-build-system) (arguments '(#:phases @@ -3233,25 +3261,29 @@ simultaneous database connections by using this framework.") "0m680h8cc4428xin4p733azysamzgzcmv4psjvraykrsaz6ymlj3")))) (build-system gnu-build-system) (native-inputs - `(("inetutils" ,inetutils) - ("glibc-locales" ,glibc-locales))) + `(;; For tests. + ("inetutils" ,inetutils) + ("glibc-locales" ,glibc-locales) + ("mariadb" ,mariadb/fixed-install-db))) (inputs `(("libdbi" ,libdbi) - ("mysql" ,mariadb) + ("mariadb:dev" ,mariadb "dev") + ("mariadb:lib" ,mariadb "lib") ("postgresql" ,postgresql) ("sqlite" ,sqlite))) (arguments `(#:configure-flags (let ((libdbi (assoc-ref %build-inputs "libdbi")) - (mysql (assoc-ref %build-inputs "mysql")) + (mysql:inc (assoc-ref %build-inputs "mariadb:dev")) + (mysql:lib (assoc-ref %build-inputs "mariadb:lib")) (postgresql (assoc-ref %build-inputs "postgresql")) (sqlite (assoc-ref %build-inputs "sqlite"))) (list "--disable-docs" (string-append "--with-dbi-incdir=" libdbi "/include") (string-append "--with-dbi-libdir=" libdbi "/lib") "--with-mysql" - (string-append "--with-mysql-incdir=" mysql "/include/mysql") - (string-append "--with-mysql-libdir=" mysql "/lib") + (string-append "--with-mysql-incdir=" mysql:inc "/include/mysql") + (string-append "--with-mysql-libdir=" mysql:lib "/lib") "--with-pgsql" (string-append "--with-pgsql-incdir=" postgresql "/include") (string-append "--with-pgsql-libdir=" postgresql "/lib") @@ -3265,7 +3297,7 @@ simultaneous database connections by using this framework.") (substitute* "tests/test_mysql.sh" (("^MYMYSQLD=.*") (string-append "MYMYSQLD=" - (assoc-ref inputs "mysql") + (assoc-ref inputs "mariadb") "/bin/mysqld"))) #t)) (add-after 'install 'remove-empty-directories diff --git a/gnu/packages/diffoscope.scm b/gnu/packages/diffoscope.scm index 7fe7766a15..a362285051 100644 --- a/gnu/packages/diffoscope.scm +++ b/gnu/packages/diffoscope.scm @@ -67,7 +67,7 @@ #:use-module (ice-9 match)) (define-public diffoscope - (let ((version "131")) + (let ((version "134")) (package (name "diffoscope") (version version) @@ -79,7 +79,7 @@ (file-name (git-file-name name version)) (sha256 (base32 - "0jai3kycjlrc64f4vg8yklri6ds1451qy6r6sw2646bhjr0gs233")))) + "04078cn3lazcrpgzzzy1s9721hprkylrvfa58izm4dcvgd7a593z")))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases @@ -209,7 +209,8 @@ ("wabt" ,wabt) ("xxd" ,xxd) ("xz" ,xz) - ("zip" ,zip))) + ("zip" ,zip) + ("zstd" ,zstd))) (home-page "https://diffoscope.org/") (synopsis "Compare files, archives, and directories in depth") (description diff --git a/gnu/packages/digest.scm b/gnu/packages/digest.scm index 7ec4ca1495..f76cbabcf8 100644 --- a/gnu/packages/digest.scm +++ b/gnu/packages/digest.scm @@ -1,5 +1,5 @@ ;;; GNU Guix --- Functional package management for GNU -;;; Copyright © 2017 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2017, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -25,7 +25,7 @@ (define-public xxhash (package (name "xxhash") - (version "0.6.5") + (version "0.7.2") (source (origin (method git-fetch) @@ -34,16 +34,13 @@ (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "137hifc3f3cb4ib64rd6y83arc9hmbyncgrij2v8m94mx66g2aks")))) + (base32 "1f9gl0cymmi92ihsfan0p4zmyf2hxwx4arjimpbmbp719nbcvdsx")))) (build-system gnu-build-system) (arguments `(#:make-flags (list "CC=gcc" "XXH_FORCE_MEMORY_ACCESS=1" ; improved performance with GCC (string-append "prefix=" (assoc-ref %outputs "out"))) - #:test-target "test" - ;; Parallel testing tries to run ‘xxhsum’ before it's been built. - #:parallel-tests? #f #:phases (modify-phases %standard-phases (delete 'configure)))) ; no configure script diff --git a/gnu/packages/display-managers.scm b/gnu/packages/display-managers.scm index 75eab48572..bfe1a8f6dd 100644 --- a/gnu/packages/display-managers.scm +++ b/gnu/packages/display-managers.scm @@ -107,7 +107,7 @@ (string-append "-DCMAKE_INSTALL_SYSCONFDIR=" (assoc-ref %outputs "out") "/etc")) #:phases - (modify-phases (@ (guix build qt-build-system) %standard-phases) + (modify-phases %standard-phases (add-after 'unpack 'embed-loginctl-reference (lambda _ (substitute* "CMakeLists.txt" diff --git a/gnu/packages/distributed.scm b/gnu/packages/distributed.scm index 4e1acc4b67..4a35094eba 100644 --- a/gnu/packages/distributed.scm +++ b/gnu/packages/distributed.scm @@ -1,5 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2019 Brant Gardner <brantcgardner@brantware.com> +;;; Copyright © 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -42,7 +43,7 @@ (define-public boinc-client (package (name "boinc-client") - (version "7.16.1") + (version "7.16.3") (source (origin (method git-fetch) (uri (git-reference @@ -53,7 +54,7 @@ (file-name (git-file-name "boinc" version)) (sha256 (base32 - "0w2qimcwyjhapk3z7zyq7jkls23hsnmm35iw7m4s4if04fp70dx0")))) + "1l181s7wnx0xd7m62qjixdjw4ri87q47xi0x662m2jsh9lzb8khf")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--disable-server"))) (inputs `(("openssl" ,openssl) diff --git a/gnu/packages/dns.scm b/gnu/packages/dns.scm index 0fbccddc89..60e392de0d 100644 --- a/gnu/packages/dns.scm +++ b/gnu/packages/dns.scm @@ -114,7 +114,7 @@ and BOOTP/TFTP for network booting of diskless machines.") (define-public isc-bind (package (name "bind") - (version "9.14.8") + (version "9.14.9") (source (origin (method url-fetch) (uri (string-append @@ -122,7 +122,7 @@ and BOOTP/TFTP for network booting of diskless machines.") "/bind-" version ".tar.gz")) (sha256 (base32 - "0xm0xrpgxq6gk6r6aa2w0lygnq02y1p614dmyjdmlsfnrrsslig5")))) + "0g2ph3hlw86yib8hv13qgkb4i84s9zv22r4k6yqlycm2izamwmr9")))) (build-system gnu-build-system) (outputs `("out" "utils")) (inputs @@ -320,14 +320,14 @@ asynchronous fashion.") (define-public nsd (package (name "nsd") - (version "4.2.3") + (version "4.2.4") (source (origin (method url-fetch) (uri (string-append "https://www.nlnetlabs.nl/downloads/nsd/nsd-" version ".tar.gz")) (sha256 - (base32 "1664wpglrwqk627xma10f9qa652vzmf90gsjd8pribyj74xrczc1")))) + (base32 "0z7j3vwqqj0hh8n5irb2yqwzl45k4sn2wczbq1b1lqv5cxv6vgcy")))) (build-system gnu-build-system) (arguments `(#:configure-flags @@ -595,15 +595,14 @@ Extensions} (DNSSEC).") (define-public knot (package (name "knot") - (version "2.9.1") + (version "2.9.2") (source (origin (method url-fetch) (uri (string-append "https://secure.nic.cz/files/knot-dns/" "knot-" version ".tar.xz")) (sha256 - (base32 - "0kd0v2w1c2by1l8jw91x16wkyyy9wh9lyr93g4w0qdmadjaj34gi")) + (base32 "1vmndmbzwwrqczhygkhpdn5xxljcnaa3d0z5yw6vb2bmm8rxz319")) (modules '((guix build utils))) (snippet '(begin @@ -671,18 +670,18 @@ synthesis, and on-the-fly re-configuration.") (define-public knot-resolver (package (name "knot-resolver") - (version "4.2.2") + (version "4.3.0") (source (origin (method url-fetch) (uri (string-append "https://secure.nic.cz/files/knot-resolver/" "knot-resolver-" version ".tar.xz")) (sha256 (base32 - "0n0llpclhparq9wbcrymxkl5d03c4y4p3shcbdxfv6j22vzqvdh3")))) + "09ffmqx79lv5psr433x4n946njgsn071b9b7161pcb9bmrqz380c")))) (build-system meson-build-system) (arguments '(#:configure-flags - '("-Dmanaged_ta=disabled" ; We'll manage the DNS root data ourself. + '("-Dmanaged_ta=disabled" ; we'll manage the DNS root data ourself "-Ddoc=enabled") #:phases (modify-phases %standard-phases diff --git a/gnu/packages/drones.scm b/gnu/packages/drones.scm new file mode 100644 index 0000000000..18b2621e4a --- /dev/null +++ b/gnu/packages/drones.scm @@ -0,0 +1,198 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2019 Mathieu Othacehe <m.othacehe@gmail.com> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages drones) + #:use-module (guix licenses) + #:use-module (guix packages) + #:use-module (gnu packages cross-base) + #:use-module (gnu packages pkg-config) + #:use-module (gnu packages python) + #:use-module (gnu packages python-xyz) + #:use-module (guix download) + #:use-module (guix utils) + #:use-module (guix git-download) + #:use-module (guix build-system gnu)) + +(define (ardupilot-type->tag type) + (case type + ((copter) "Copter") + ((plane) "ArduPlane") + ((rover) "Rover") + (else #f))) + +(define (ardupilot-type->waf-cmd type) + (symbol->string type)) + +(define* (make-ardupilot-firmware #:key name version base32 type board target) + (package + (name (string-append name "-" board)) + (version version) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/ArduPilot/ardupilot") + (commit (string-append + (ardupilot-type->tag type) "-" version)) + ;; XXX: Ardupilot includes several git submodules. They should be + ;; avoided but as this is not supported upstream, and not trivial + ;; to fix, keep it this way for now. + (recursive? #t))) + (file-name (git-file-name name version)) + (sha256 base32))) + + ;; Could also be waf-build-system but every phase has to be rewritten + ;; anyway. + (build-system gnu-build-system) + (arguments + `(#:imported-modules ((gnu build cross-toolchain) + ,@%gnu-build-system-modules) + #:phases + (modify-phases %standard-phases + (delete 'bootstrap) + + ;; Remove the root waf script that relies on waf git submodule. + (add-before 'configure 'setup-waf + (lambda* (#:key native-inputs inputs #:allow-other-keys) + (let ((waf (assoc-ref (or native-inputs inputs) "waf"))) + (delete-file "waf") + (copy-file (string-append waf "/bin/waf") "waf")) + #t)) + + ;; When cross-compiling, we do not want to use the default gnu + ;; cross-compiler, so set CROSS_CPATH and CROSS_LIBRARY_PATH + ;; variables ourselves instead. + (delete 'set-cross-path) + (add-before 'configure 'set-custom-cross-cpath + (lambda* (#:key native-inputs inputs #:allow-other-keys) + ((@@ (gnu build cross-toolchain) set-cross-path) + #:inputs + `(("libc" . ,(assoc-ref (or native-inputs inputs) + "ardupilot-cross-libc")) + ("xkernel-headers" . + ,(assoc-ref (or native-inputs inputs) + "ardupilot-cross-kernel-headers")))) + ;; We need to produce a static binary, so that it can works on + ;; other systems than Guix System. Add a static version of the + ;; cross libc to CROSS_LIBRARY_PATH variable. + (setenv "CROSS_LIBRARY_PATH" + (string-append + (getenv "CROSS_LIBRARY_PATH") ":" + (assoc-ref (or native-inputs inputs) + "ardupilot-cross-libc-static") "/lib")) + #t)) + + ;; Remove dependencies to 'git'. + (add-before 'configure 'remove-git + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "wscript" + (("^.*cfg\\.load\\('git_submodule.*$") + "")) + (substitute* "Tools/ardupilotwaf/boards.py" + (("^.*GIT_VERSION.*$") + "")) + #t)) + + ;; Configure for the given BOARD, and force a static build for + ;; reasons exposed above. + (replace 'configure + (lambda* (#:key outputs #:allow-other-keys) + (invoke "./waf" "configure" "--board" ,board "--static") + #t)) + + (replace 'build + (lambda* (#:key outputs #:allow-other-keys) + (invoke "./waf" ,(ardupilot-type->waf-cmd type)) + #t)) + + ;; Do not run tests as we are always cross-compiling. + (delete 'check) + + ;; Install the produced firmware. + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin"))) + (mkdir-p bin) + (copy-recursively + (string-append "build/" ,board "/bin") bin)) + #t))))) + (native-inputs + `(("waf" ,python-waf) + ("python" ,python) + ("python-future" ,python-future) + ("python-lxml" ,python-lxml) + + ;; Packages needed for cross-compiling the firmware. + ("ardupilot-cross-gcc" ,(cross-gcc target + #:xbinutils + (cross-binutils target) + #:libc + (cross-libc target))) + ("ardupilot-cross-libc" ,(cross-libc target)) + ("ardupilot-cross-libc-static" ,(cross-libc target) "static") + ("ardupilot-cross-kernel-headers" + ,@(assoc-ref (package-propagated-inputs + (cross-libc target)) + "kernel-headers")) + ("ardupilot-cross-binutils" ,(cross-binutils target)) + ("ardupilot-cross-pkg-config" ,(parameterize ((%current-target-system + target)) + pkg-config)))) + (home-page "https://ardupilot.org/") + (synopsis "Unmanned vehicle autopilot software suite") + (description "@code{ardupilot} is an unmanned vehicle autopilot software +suite capable of controlling autonomous: +@itemize +@item multirotor drones +@item fixed-wing and vtol aircraft +@item helicopters +@item ground rovers +@item boats +@item submarines +@item antenna trackers +@end itemize") + (license gpl3+))) + +(define (make-arducopter-firmware board target) + (make-ardupilot-firmware + #:name "arducopter" + #:version "3.6.11" + #:base32 (base32 "1zkr2nhkksmrriirs2dnp8a0gcf9rfqw1x86pzhh6w4ciqwpidqn") + #:type 'copter + #:board board + #:target target)) + +(define (make-arduplane-firmware board target) + (make-ardupilot-firmware + #:name "arduplane" + #:version "4.0.1" + #:base32 (base32 "0awafvrppg4ilwpbhw88r5xkbgqrmqypsn6lbzyi6bz0zy5cfhb5") + #:type 'plane + #:board board + #:target target)) + +(define-public arducopter-bbbmini + (make-arducopter-firmware "bbbmini" "arm-linux-gnueabihf")) + +(define-public arduplane-bbbmini + (make-arduplane-firmware "bbbmini" "arm-linux-gnueabihf")) + +;; Firmware for Bebop and Bebop2 drones. +(define-public arducopter-bebop + (make-arducopter-firmware "bebop" "arm-linux-gnueabihf")) diff --git a/gnu/packages/dunst.scm b/gnu/packages/dunst.scm index 2621fc55ab..75f2b80e5f 100644 --- a/gnu/packages/dunst.scm +++ b/gnu/packages/dunst.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015, 2017, 2018 Alex Kost <alezost@gmail.com> ;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2019 Efraim Flashner <efraim@flashner.co.il> ;;; ;;; This file is part of GNU Guix. ;;; @@ -19,7 +20,7 @@ (define-module (gnu packages dunst) #:use-module (guix packages) - #:use-module (guix download) + #:use-module (guix git-download) #:use-module (guix build-system gnu) #:use-module ((guix licenses) #:prefix license:) #:use-module (gnu packages base) @@ -35,14 +36,14 @@ (name "dunst") (version "1.4.1") (source (origin - (method url-fetch) - (uri (string-append - "https://github.com/dunst-project/dunst/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/dunst-project/dunst") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "1zmx30qp2s9ca4q70j9ny4aq97pp442j9vfvsyihfcxgks6gwqqm")))) + "0xjj1f2jr1ja5grj6wrx5jjz1sx5fpqnvkw7nqi4452j3nc4p4l2")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; no check target diff --git a/gnu/packages/ebook.scm b/gnu/packages/ebook.scm index 4c3efbfe02..7f8aa42e95 100644 --- a/gnu/packages/ebook.scm +++ b/gnu/packages/ebook.scm @@ -4,7 +4,7 @@ ;;; Copyright © 2016, 2017 Alex Griffin <a@ajgrf.com> ;;; Copyright © 2017, 2019 Brendan Tildesley <mail@brendan.scot> ;;; Copyright © 2017 Roel Janssen <roel@gnu.org> -;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -337,7 +337,7 @@ following formats: (define-public xchm (package (name "xchm") - (version "1.30") + (version "1.31") (source (origin (method url-fetch) (uri (string-append "https://github.com/rzvncj/xCHM" @@ -345,7 +345,7 @@ following formats: version "/xchm-" version ".tar.gz")) (sha256 (base32 - "1865wb3ppmx5y12rqfhv4wri0lfdah41zsfz94xb8gym80m8zac5")))) + "0aw6bysqiwbw75n3ad229ihlmh7chqs1wlxm0398z3lfp2y6n7qf")))) (build-system gnu-build-system) (inputs `(("wxwidgets" ,wxwidgets) diff --git a/gnu/packages/education.scm b/gnu/packages/education.scm index c457f5a021..ecb8678b02 100644 --- a/gnu/packages/education.scm +++ b/gnu/packages/education.scm @@ -254,7 +254,7 @@ easy.") (define-public snap (package (name "snap") - (version "5.3.8") + (version "5.4.0") (source (origin (method git-fetch) @@ -264,7 +264,7 @@ easy.") (file-name (git-file-name name version)) (sha256 (base32 - "1lm5vvykdzgn667kvnsv0ab5bl0kjsr05kvcd18a7pn0g8sykfpc")))) + "05m3x8yc9a7x9hfkrz2bm3yqkc63cdb8v3yznkjqq04sfx5dfd04")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) @@ -488,14 +488,14 @@ letters of the alphabet, spelling, eye-hand coordination, etc.") (define-public fet (package (name "fet") - (version "5.41.0") + (version "5.42.1") (source (origin (method url-fetch) (uri (string-append "https://www.lalescu.ro/liviu/fet/download/" "fet-" version ".tar.bz2")) (sha256 (base32 - "0ppa5h1p0y0z8x4xpn45b0x3nl1khyh56m22v6xysk3znxlak4q7")))) + "1dzlbhp42dxdxbcrjwrjl4kj65cibxgjqc3ir1w78yprikihdxca")))) (build-system gnu-build-system) (arguments `(#:phases @@ -555,7 +555,7 @@ language and very flexible regarding to new or unknown keyboard layouts.") (define-public ktouch (package (name "ktouch") - (version "19.08.2") + (version "19.08.3") (source (origin (method url-fetch) @@ -563,11 +563,11 @@ language and very flexible regarding to new or unknown keyboard layouts.") version "/src/ktouch-" version ".tar.xz")) (sha256 (base32 - "0dm6xcwai0bx2h16rny1xa9n1509mfxvy39kfxx5qih53p15jrnk")))) + "0dqxb3xsjc2rwc9779l5fnr4crhq51bc8ln4azbgnnkzldvq6a4a")))) (build-system qt-build-system) (arguments `(#:phases - (modify-phases (@ (guix build qt-build-system) %standard-phases) + (modify-phases %standard-phases (add-after 'configure 'patch-makefiles (lambda* (#:key inputs #:allow-other-keys) (let ((qtdec (assoc-ref inputs "qtdeclarative"))) diff --git a/gnu/packages/emacs-xyz.scm b/gnu/packages/emacs-xyz.scm index 44e38ee545..c591a608eb 100644 --- a/gnu/packages/emacs-xyz.scm +++ b/gnu/packages/emacs-xyz.scm @@ -41,7 +41,7 @@ ;;; Copyright © 2018 Alex Branham <alex.branham@gmail.com> ;;; Copyright © 2018 Thorsten Wilms <t_w_@freenet.de> ;;; Copyright © 2018, 2019 Pierre Langlois <pierre.langlois@gmx.com> -;;; Copyright © 2018, 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2018, 2019 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2019 Dimakakos Dimos <bendersteed@teknik.io> ;;; Copyright © 2019 Brian Leung <bkleung89@gmail.com> ;;; Copyright © 2019 mikadoZero <mikadozero@yandex.com> @@ -250,7 +250,7 @@ configuration files, such as .gitattributes, .gitignore, and .git/config.") (define-public emacs-with-editor (package (name "emacs-with-editor") - (version "2.8.3") + (version "2.9.0") (source (origin (method git-fetch) (uri (git-reference @@ -259,7 +259,7 @@ configuration files, such as .gitattributes, .gitignore, and .git/config.") (file-name (git-file-name name version)) (sha256 (base32 - "1z2h9casyw1b93ikq2mf9xixyvbl90zddf0s66lqfiyj2y376pq3")))) + "1sjb3qqrn1rhmpkrn14l8rya6c3gwxwmgw74n779s54kvl9gn7a9")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-dash" ,emacs-dash))) @@ -495,7 +495,7 @@ process, passing on the arguments as command line arguments.") (define-public emacs-minions (package (name "emacs-minions") - (version "0.3.1") + (version "0.3.2") (source (origin (method git-fetch) (uri (git-reference @@ -504,7 +504,7 @@ process, passing on the arguments as command line arguments.") (file-name (git-file-name name version)) (sha256 (base32 - "0q2y37zfxlbfvgdn70ikg3abp8vljna4ir9nyqlz1awmz5i1c43s")))) + "16rplpbfy3dnvqqgavk9jb1f1ihr5875zlixd4zxb1pqxs3jkgw3")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-dash" ,emacs-dash))) @@ -548,33 +548,33 @@ clojure.walk and clojure.zip respectively.") (define-public emacs-graphql (package - (name "emacs-graphql") - (version "0.1.1") - (source (origin - (modules '((guix build utils))) - ;; Remove examples file with references to external packages as - ;; they do not exist at compilation time. - (snippet - '(begin (delete-file "examples.el") - #t)) - (method git-fetch) - (uri (git-reference - (url "https://github.com/vermiculus/graphql.el.git") - (commit version))) + (name "emacs-graphql") + (version "0.1.1") + (source (origin + (modules '((guix build utils))) + ;; Remove examples file with references to external packages as + ;; they do not exist at compilation time. + (snippet + '(begin (delete-file "examples.el") + #t)) + (method git-fetch) + (uri (git-reference + (url "https://github.com/vermiculus/graphql.el.git") + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0sp0skc1rnhi39szfbq1i99pdgd3bhn4c15cff05iqhjy2d4hniw")))) - (build-system emacs-build-system) - (home-page - "https://github.com/vermiculus/graphql.el") - (synopsis "GraphQL utilities") - (description - "GraphQL.el provides a generally-applicable domain-specific language for + (build-system emacs-build-system) + (home-page + "https://github.com/vermiculus/graphql.el") + (synopsis "GraphQL utilities") + (description + "GraphQL.el provides a generally-applicable domain-specific language for creating and executing GraphQL queries against your favorite web services. GraphQL is a data query language and runtime designed and used to request and deliver data to mobile and web apps.") - (license license:gpl3+))) + (license license:gpl3+))) (define-public emacs-ghub ;; We need a newer commit to avoid problems in emacs-forge. @@ -640,17 +640,23 @@ for editing Racket's Scribble documentation syntax in Emacs.") (define-public emacs-shroud (package (name "emacs-shroud") - (version "1.83.4") + (version "1.105") (source (origin (method git-fetch) (uri (git-reference - (url "https://github.com/o-nly/emacs-shroud.git") + (url "https://git.savannah.gnu.org/git/emacs-shroud.git") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "1yvdjx0kp4y8w5yz2cbqq9n6xl5splvmsyyx8ld1xv0q1c9872nf")))) - (build-system emacs-build-system) + (base32 "0q2pb3w8s833fjhkzicciw2php4lsnismad1dnwgp2lcway757ra")))) + (build-system gnu-build-system) + (native-inputs + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("texinfo" ,texinfo) + ("perl" ,perl) + ("emacs-minimal" ,emacs-minimal))) (propagated-inputs `(("emacs-bui" ,emacs-bui) ("emacs-dash" ,emacs-dash) @@ -658,7 +664,7 @@ for editing Racket's Scribble documentation syntax in Emacs.") ("emacs-s" ,emacs-s) ("gnupg" ,gnupg) ("shroud" ,shroud))) - (home-page "https://github.com/o-nly/emacs-shroud") + (home-page "https://www.nongnu.org/emacs-shroud") (synopsis "Emacs interface to the Shroud password manager") (description "This package provides an Emacs interface to the Shroud password manager, @@ -711,8 +717,8 @@ replacement.") (source (origin (method git-fetch) (uri (git-reference - (url "https://github.com/haskell/haskell-mode") - (commit (string-append "v" version)))) + (url "https://github.com/haskell/haskell-mode") + (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1qk36y0v9fzass6785il65c6wb5cfj4ihhwkvgnzmbafpa8p4dvq")) @@ -740,47 +746,47 @@ replacement.") (modify-phases %standard-phases (delete 'configure) (add-before - 'build 'pre-build - (lambda* (#:key inputs #:allow-other-keys) - (define (el-dir store-dir) - (match (find-files store-dir "\\.el$") - ((f1 f2 ...) (dirname f1)) - (_ ""))) - - (let ((sh (string-append (assoc-ref inputs "bash") "/bin/sh"))) - (define emacs-prefix? (cut string-prefix? "emacs-" <>)) - - (setenv "SHELL" "sh") - (setenv "EMACSLOADPATH" - (string-concatenate - (map (match-lambda - (((? emacs-prefix? name) . dir) - (string-append (el-dir dir) ":")) - (_ "")) - inputs))) - (substitute* (find-files "." "\\.el") (("/bin/sh") sh)) - ;; embed filename to fix test failure - (let ((file "tests/haskell-cabal-tests.el")) - (substitute* file - (("\\(buffer-file-name\\)") - (format #f "(or (buffer-file-name) ~s)" file)))) - #t))) + 'build 'pre-build + (lambda* (#:key inputs #:allow-other-keys) + (define (el-dir store-dir) + (match (find-files store-dir "\\.el$") + ((f1 f2 ...) (dirname f1)) + (_ ""))) + + (let ((sh (string-append (assoc-ref inputs "bash") "/bin/sh"))) + (define emacs-prefix? (cut string-prefix? "emacs-" <>)) + + (setenv "SHELL" "sh") + (setenv "EMACSLOADPATH" + (string-concatenate + (map (match-lambda + (((? emacs-prefix? name) . dir) + (string-append (el-dir dir) ":")) + (_ "")) + inputs))) + (substitute* (find-files "." "\\.el") (("/bin/sh") sh)) + ;; embed filename to fix test failure + (let ((file "tests/haskell-cabal-tests.el")) + (substitute* file + (("\\(buffer-file-name\\)") + (format #f "(or (buffer-file-name) ~s)" file)))) + #t))) (replace - 'install - (lambda* (#:key outputs #:allow-other-keys) - (let* ((out (assoc-ref outputs "out")) - (el-dir (string-append out "/share/emacs/site-lisp")) - (doc (string-append - out "/share/doc/haskell-mode-" ,version)) - (info (string-append out "/share/info"))) - (define (copy-to-dir dir files) - (for-each (lambda (f) - (install-file f dir)) - files)) - - (with-directory-excursion "doc" - (invoke "makeinfo" "haskell-mode.texi") - (install-file "haskell-mode.info" info)) + 'install + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (el-dir (string-append out "/share/emacs/site-lisp")) + (doc (string-append + out "/share/doc/haskell-mode-" ,version)) + (info (string-append out "/share/info"))) + (define (copy-to-dir dir files) + (for-each (lambda (f) + (install-file f dir)) + files)) + + (with-directory-excursion "doc" + (invoke "makeinfo" "haskell-mode.texi") + (install-file "haskell-mode.info" info)) (copy-to-dir doc '("CONTRIBUTING.md" "NEWS" "README.md")) (copy-to-dir el-dir (find-files "." "\\.elc?")) ;; These are part of other packages. @@ -799,10 +805,10 @@ programs.") (define-public emacs-dante (let ((commit "38b589417294c7ea44bf65b73b8046d950f9531b") - (revision "3")) + (revision "1")) (package (name "emacs-dante") - (version (git-version "1.5" revision commit)) + (version (git-version "1.6" revision commit)) (source (origin (method git-fetch) (uri (git-reference @@ -1037,14 +1043,14 @@ terminals.") (version "0.4") (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/purcell/reformatter.el.git") - (commit version))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "0hhy6x1bkwlhdlarsgm06g3am4yh02yqv8qs34szpzgy53x84qah")))) + (method git-fetch) + (uri (git-reference + (url "https://github.com/purcell/reformatter.el.git") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0hhy6x1bkwlhdlarsgm06g3am4yh02yqv8qs34szpzgy53x84qah")))) (build-system emacs-build-system) (home-page "https://github.com/purcell/reformatter.el") (synopsis "Define commands which run reformatters on the current buffer") @@ -1200,11 +1206,11 @@ or unexpected behavior inside an elisp configuration file (typically (name "emacs-wget") (version "0.5.0") (source (origin - (method url-fetch) - (uri (string-append "mirror://debian/pool/main/w/wget-el/wget-el_" - version ".orig.tar.gz")) - (sha256 - (base32 "10byvyv9dk0ib55gfqm7bcpxmx2qbih1jd03gmihrppr2mn52nff")))) + (method url-fetch) + (uri (string-append "mirror://debian/pool/main/w/wget-el/wget-el_" + version ".orig.tar.gz")) + (sha256 + (base32 "10byvyv9dk0ib55gfqm7bcpxmx2qbih1jd03gmihrppr2mn52nff")))) (build-system gnu-build-system) (inputs `(("wget" ,wget))) (native-inputs `(("emacs" ,emacs-minimal))) @@ -1241,6 +1247,30 @@ or unexpected behavior inside an elisp configuration file (typically "Emacs-wget is an emacs interface for the wget file downloader.") (license license:gpl2+))) +(define-public emacs-eww-lnum + (package + (name "emacs-eww-lnum") + (version "1.1") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/m00natic/eww-lnum.git") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0gs6bi3s2sszc6v2b26929azmn5513kvyin99n4d0ark1jdbjmv2")))) + (build-system emacs-build-system) + (home-page "https://github.com/m00natic/eww-lnum") + (synopsis "Conkeror-like functionality for Eww") + (description "This is extension to the Emacs browser Eww that adds +Conkeror-like functionality. In short, currently visible links, forms, +buttons are temporarily assigned numbers with which the former can be +immediately activated. Also filtering can be applied so selection can be +incrementally confined in Isearch manner.") + (license license:gpl3+))) + + ;;; ;;; Multimedia. @@ -1399,8 +1429,8 @@ light user interface.") (origin (method git-fetch) (uri (git-reference - (url "https://github.com/momomo5717/emms-mode-line-cycle") - (commit version))) + (url "https://github.com/momomo5717/emms-mode-line-cycle") + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 @@ -1545,8 +1575,8 @@ links.") (source (origin (method git-fetch) (uri (git-reference - (url "https://github.com/Wilfred/ag.el.git") - (commit version))) + (url "https://github.com/Wilfred/ag.el.git") + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 @@ -1586,7 +1616,7 @@ rather than the contents of files.") (package (name "emacs-async") (home-page "https://github.com/jwiegley/emacs-async") - (version "1.9.3") + (version "1.9.4") (source (origin (method git-fetch) (uri (git-reference @@ -1595,7 +1625,7 @@ rather than the contents of files.") (file-name (git-file-name name version)) (sha256 (base32 - "1zsnb6dy8p6y68xgidv3dfxaga4biramfw8fq7wac0sc50vc98vq")))) + "0hhpyxb3d531jb2f3wvzx25183f0anm8nxv6mh0p825q2gkm6ly7")))) (build-system emacs-build-system) (synopsis "Asynchronous processing in Emacs") (description @@ -1641,8 +1671,8 @@ or XEmacs.") (origin (method git-fetch) (uri (git-reference - (url "https://github.com/sebastiansturm/autothemer.git") - (commit version))) + (url "https://github.com/sebastiansturm/autothemer.git") + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 @@ -1675,7 +1705,7 @@ a set of simplified face specifications and a user-supplied color palette") (arguments `(#:configure-flags (list (string-append "--with-howmdir=" %output - "/share/emacs/site-lisp/guix.d/howm-" ,version)) + "/share/emacs/site-lisp/")) #:modules ((guix build gnu-build-system) ((guix build emacs-build-system) #:prefix emacs:) (guix build utils)) @@ -1701,8 +1731,8 @@ searches. Unlike code@{emacs-wiki.el}, it can be combined with any format.") (origin (method git-fetch) (uri (git-reference - (url "https://github.com/kiwanami/emacs-calfw.git") - (commit (string-append "v" version)))) + (url "https://github.com/kiwanami/emacs-calfw.git") + (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 @@ -1720,17 +1750,17 @@ Emacs buffer.") (define-public emacs-direnv (package (name "emacs-direnv") - (version "1.5.0") + (version "2.0.0") (source (origin (method git-fetch) (uri (git-reference - (url "https://github.com/wbolster/emacs-direnv.git") - (commit version))) + (url "https://github.com/wbolster/emacs-direnv.git") + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 - "02blhinkkfh3iai6j1k5swplf5mkwijy3p7wy38rnd1gnyj2z4la")))) + "005ibyzsx1fdyrl5iyhqpb1bg83mphzahq7zvw58x00syyqi2z49")))) (build-system emacs-build-system) (propagated-inputs `(("dash" ,emacs-dash) @@ -1840,8 +1870,8 @@ written in the Go programming language.") (source (origin (method git-fetch) (uri (git-reference - (url "https://github.com/jd/google-maps.el.git") - (commit version))) + (url "https://github.com/jd/google-maps.el.git") + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 @@ -1854,11 +1884,11 @@ Maps directly inside Emacs.") (license license:gpl3+))) (define-public emacs-graphviz-dot-mode - (let ((commit "c456a2b65c734089e6c44e87209a5a432a741b1a") + (let ((commit "1574c504d9810f34a85e2ff49b6f7648c2be5f27") (revision "1")) (package (name "emacs-graphviz-dot-mode") - (version (string-append "0.3.11-" revision "." + (version (string-append "0.4.1-" revision "." (string-take commit 7))) (source (origin (method git-fetch) @@ -1868,7 +1898,7 @@ Maps directly inside Emacs.") (file-name (git-file-name name version)) (sha256 (base32 - "0j1r2rspaakw37b0mx7pwpvdsvixq9sw3xjbww5piihzpdxz58z1")))) + "03l6zkkxhbcxj5i13hzjv6ypmzaw70zqqagh7ix1kdn33kpp37jj")))) (build-system emacs-build-system) (arguments `(#:phases @@ -1910,8 +1940,8 @@ diagrams.") (origin (method git-fetch) (uri (git-reference - (url "https://github.com/purcell/mmm-mode.git") - (commit version))) + (url "https://github.com/purcell/mmm-mode.git") + (commit version))) (file-name (git-file-name name version)) (sha256 (base32 @@ -1936,8 +1966,8 @@ single buffer.") (source (origin (method git-fetch) (uri (git-reference - (url "https://github.com/politza/tablist.git") - (commit (string-append "v" version)))) + (url "https://github.com/politza/tablist.git") + (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 @@ -2175,7 +2205,7 @@ evaluations. The entry point is @code{M-x build-farm} command.") (define-public emacs-d-mode (package (name "emacs-d-mode") - (version "2.0.9") + (version "2.0.10") (source (origin (method git-fetch) @@ -2184,7 +2214,7 @@ evaluations. The entry point is @code{M-x build-farm} command.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "0fzplvi1sm8k2sabfdvrd7j2xypwqh0g9v1mxa75dajdmcd85zpj")))) + (base32 "0915kb9jcaixgindhj85fmykkhvj31ckp1yg6746fznwdgfrlifv")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-undercover" ,emacs-undercover))) @@ -2225,13 +2255,13 @@ running Extempore process, and more.") (name "emacs-keyfreq") (version "20160516.716") (source - (origin - (method url-fetch) - (uri (string-append "http://melpa.org/packages/keyfreq-" - version ".el")) - (sha256 - (base32 - "008hd7d06qskc3mx0bbdgpgy2pwxr8185fzlyqf9qjg49y74p6g8")))) + (origin + (method url-fetch) + (uri (string-append "http://melpa.org/packages/keyfreq-" + version ".el")) + (sha256 + (base32 + "008hd7d06qskc3mx0bbdgpgy2pwxr8185fzlyqf9qjg49y74p6g8")))) (build-system emacs-build-system) (home-page "https://github.com/dacap/keyfreq") (synopsis "Track Emacs command frequencies") @@ -2682,16 +2712,16 @@ keep pressing the key until it selects what you want. There's also (define-public emacs-fill-column-indicator (package (name "emacs-fill-column-indicator") - (version "1.89") + (version "1.90") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/alpaker/Fill-Column-Indicator.git") - (commit (string-append "v" version)))) + (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "010kf8jsly74y7m6mmkn1h6y205kz23zphs50zgy2nag2p88rz9y")))) + (base32 "0snjznxdwwfdgccdcvrnk467416r244r2r5qcm2sga8l0ha9gw9z")))) (build-system emacs-build-system) (home-page "https://www.emacswiki.org/emacs/FillColumnIndicator") (synopsis "Graphically indicate the fill column") @@ -2786,16 +2816,16 @@ Emacs shell script.") (define-public emacs-undercover (package (name "emacs-undercover") - (version "0.6.0") + (version "0.6.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/sviridov/undercover.el.git") - (commit (string-append "v" version)))) + (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "06qcvbp5rd0kh3ibrxj5p6r578lwsrgd7yj5c6slwmkdmna2fj33")))) + (base32 "080bmfwyfi8663y8x594770hqz7mff7zvj2v03qdfwbhdr9w9y29")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-dash" ,emacs-dash) @@ -2810,7 +2840,7 @@ Lisp.") (define-public emacs-paren-face (package (name "emacs-paren-face") - (version "1.0.0") + (version "1.0.5") (source (origin (method git-fetch) @@ -2819,7 +2849,8 @@ Lisp.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "0f128gqn170s6hl62n44i9asais75ns1mpvb4l8vzy1sc0v16c0k")))) + (base32 + "04vkg8fhdn8x02dydxbwpizh2yn3sbmn9432v770vbbq6b62k2lx")))) (build-system emacs-build-system) (home-page "https://github.com/tarsius/paren-face") (synopsis "Face for parentheses in lisp modes") @@ -3053,7 +3084,7 @@ their original location with another.") (define-public emacs-rich-minority (package (name "emacs-rich-minority") - (version "1.0.1") + (version "1.0.3") (source (origin (method git-fetch) @@ -3062,7 +3093,8 @@ their original location with another.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "11hwf9y5ax207w6rwrsmi3pmn7pn7ap6iys0z8hni2f5zzxjrmx3")))) + (base32 + "1kn7c9qr9ykj68iqffzzmjsr6aazwac8cxb7j960sjb282rq0yyj")))) (build-system emacs-build-system) (home-page "https://github.com/Malabarba/rich-minority") (synopsis "Clean-up and beautify the list of minor modes") @@ -3468,16 +3500,16 @@ minibuffer to enable editing the minibuffer input in another buffer with (define-public emacs-ob-ipython (package (name "emacs-ob-ipython") - (version "20150704.8807064693") + (version "20180224") (source (origin (method git-fetch) (uri (git-reference - (commit "880706469338ab59b5bb7dbe8460016f89755364") + (commit "7147455230841744fb5b95dcbe03320313a77124") (url "https://github.com/gregsexton/ob-ipython.git"))) (file-name (git-file-name name version)) (sha256 (base32 - "1scf25snbds9ymagpny30ijbsg479r3nm0ih01dy4m9d0g7qryb7")))) + "1a10fc2jk37ni5sjjvf87s5nyaz2a6h2mlj5dxh4dhv5sd3bb85p")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-f" ,emacs-f))) @@ -4363,7 +4395,7 @@ and popup menus.") (define-public emacs-jedi (package (name "emacs-jedi") - (version "0.2.7") + (version "0.2.8") (source (origin (method git-fetch) (uri (git-reference @@ -4372,7 +4404,7 @@ and popup menus.") (file-name (git-file-name name version)) (sha256 (base32 - "0xbp9fcxgbf298w05hvf52z41kk7r52975ailgdn8sg60xc98fa7")))) + "1bckxppfzd5gwn0aw4h86igb7igal9axqncq7j8zmflg7zppncf1")))) (build-system emacs-build-system) (native-inputs `(("emacs-mocker" ,emacs-mocker))) @@ -4669,7 +4701,7 @@ overview of tasks in a subtree.") (define-public emacs-org-trello (package (name "emacs-org-trello") - (version "0.8.0") + (version "0.8.1") (source (origin (method git-fetch) @@ -4678,7 +4710,8 @@ overview of tasks in a subtree.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "0m5hyhb6211hdmyp1bq6f3fklfgw3957knd96bfdafj727vdnlzm")))) + (base32 + "02gx3kv4mkij69ln8x8wf9n28x17pbb4kv85v78d3lxph7ykqimc")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-dash" ,emacs-dash) @@ -6352,7 +6385,7 @@ and tooling.") (define-public emacs-elfeed (package (name "emacs-elfeed") - (version "3.2.0") + (version "3.3.0") (source (origin (method git-fetch) @@ -6361,7 +6394,7 @@ and tooling.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "0m0a35210pb4yf6m8mzaq6nkl9x6fphjjqyl3dzygnmmzxkc8aw2")))) + (base32 "0j8a94val4ml7g1vcjgzk1w89h55sxfdrwnncmz6qbh1y2xsz8c5")))) (build-system emacs-build-system) (arguments `(#:tests? #t @@ -6479,7 +6512,7 @@ maximizes flexibility (at the expense of conciseness).") (define-public emacs-find-file-in-project (package (name "emacs-find-file-in-project") - (version "5.4.7") + (version "5.7.7") (source (origin (method git-fetch) (uri (git-reference @@ -6488,19 +6521,13 @@ maximizes flexibility (at the expense of conciseness).") (file-name (git-file-name name version)) (sha256 (base32 - "1sdnyqv69mipbgs9yax88m9b6crsa59rjhwrih197pifl4089awr")))) + "1skjbh7m0cck2rwmgzrrds51gipqf1jqghyfx15drc1n6kwivx3h")))) (build-system emacs-build-system) (arguments - `(#:phases - (modify-phases %standard-phases - (add-before 'check 'set-shell - ;; Otherwise Emacs shell-file-name is set to "/bin/sh", which doesn't - ;; work. - (lambda _ - (setenv "SHELL" (which "sh")) - #t))) - #:tests? #t - #:test-command '("./tests/test.sh"))) + `(#:tests? #t + #:test-command '("ert-runner" "tests"))) + (native-inputs + `(("ert-runner" ,emacs-ert-runner))) (home-page "https://github.com/technomancy/find-file-in-project") (synopsis "File/directory finder for Emacs") (description "@code{find-file-in-project} allows to find files or @@ -6646,7 +6673,7 @@ completion, interactive development and more.") (define-public emacs-rainbow-delimiters (package (name "emacs-rainbow-delimiters") - (version "2.1.3") + (version "2.1.4") (source (origin (method git-fetch) (uri (git-reference @@ -6655,7 +6682,7 @@ completion, interactive development and more.") (file-name (git-file-name name version)) (sha256 (base32 - "0vs9pf8lqq5p5qz1770pxgw47ym4xj8axxmwamn66br59mykdhv0")))) + "1zr2669savnmkc68hiqsq9wccm6bs1j6jbmlac1xqh6nq7xgq36g")))) (build-system emacs-build-system) (home-page "https://github.com/Fanael/rainbow-delimiters") (arguments @@ -6740,7 +6767,7 @@ window edge.") (define-public emacs-writeroom (package (name "emacs-writeroom") - (version "3.7") + (version "3.9") (source (origin (method git-fetch) @@ -6749,7 +6776,8 @@ window edge.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "13nbls5qxz5z8firjxaip8m9vzfbbpxmwrmr01njbk4axpwrpj0z")))) + (base32 + "1nrppnfqsaki6myp58w8jhmzb94rzskh5n98glcn4ghr8sqnafi8")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-visual-fill-column" ,emacs-visual-fill-column))) @@ -6909,7 +6937,7 @@ ack, ag, helm and pt.") (define-public emacs-helm (package (name "emacs-helm") - (version "3.5.0") + (version "3.6.0") (source (origin (method git-fetch) @@ -6918,7 +6946,7 @@ ack, ag, helm and pt.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "07bijcnfkv60l3swasxv53x32l6glds05mxnbb3xbnmkgm1pm9if")))) + (base32 "0miq2q52pbicijp7pmj0widk252qixswywc03d120s4hya2b7vd7")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-async" ,emacs-async) @@ -6936,8 +6964,8 @@ not tied in the trap of backward compatibility.") (license license:gpl3+))) (define-public emacs-helm-org - (let ((commit "542dda7bc9a3b9dfb439e4f8a1e5f60cfb6cc256") - (revision "1")) + (let ((commit "b9a1167b0716a22a69670f4c35e0ac59d2e0b220") + (revision "2")) (package (name "emacs-helm-org") (version (git-version "1.0" revision commit)) @@ -6949,7 +6977,7 @@ not tied in the trap of backward compatibility.") (commit commit))) (file-name (git-file-name name version)) (sha256 - (base32 "1xa32w80icrykpyfb89fhb0s4l7ysi0sc7f7lfwqz5najwbgqipl")))) + (base32 "1gc27i4azqpgijva1f4ckfdp4s52mc9pnfcmzhkwhknr6pd6jlcr")))) (build-system emacs-build-system) (propagated-inputs `(("emacs-helm" ,emacs-helm))) @@ -7146,7 +7174,7 @@ target will call @code{compile} on it.") (define-public emacs-cider (package (name "emacs-cider") - (version "0.21.0") + (version "0.23.0") (source (origin (method git-fetch) @@ -7156,7 +7184,7 @@ target will call @code{compile} on it.") (file-name (git-file-name name version)) (sha256 (base32 - "0lbrwj67fnvynkdkzvnzp3p8vqlz0ldrcs317vg60bqfhx7hvqkj")))) + "05yjkqc6d4grq9z5pxmv3anqh4zlhfg4v46jlccp6ynh030g7axs")))) (build-system emacs-build-system) (arguments '(#:exclude ; Don't exclude 'cider-test.el'. @@ -7164,10 +7192,12 @@ target will call @code{compile} on it.") (propagated-inputs `(("emacs-clojure-mode" ,emacs-clojure-mode) ("emacs-sesman" ,emacs-sesman) + ("emacs-seq" ,emacs-seq) ("emacs-spinner" ,emacs-spinner) + ("emacs-parseedn" ,emacs-parseedn) ("emacs-pkg-info" ,emacs-pkg-info) ("emacs-queue" ,emacs-queue))) - (home-page "https://cider.readthedocs.io/") + (home-page "https://cider.mx/") (synopsis "Clojure development environment for Emacs") (description "CIDER (Clojure Interactive Development Environment that Rocks) aims to @@ -7963,16 +7993,16 @@ passive voice.") (define-public emacs-org (package (name "emacs-org") - ;; emacs-org-contrib inherits from this package. Please update its sha256 - ;; checksum as well. - (version "9.3") + ;; emacs-org-contrib inherits from this package. Please update it as + ;; well. + (version "9.3.1") (source (origin (method url-fetch) (uri (string-append "https://elpa.gnu.org/packages/org-" version ".tar")) (sha256 (base32 - "0pyfx4xzzi3qqip958rs7j5ca1r4i5v6dfkx5kbp2ndhqmxbfxjw")))) + "1n79h6ihhsaxxbnl9hw511aav0215m3pa51sa5fh3ddknjfplian")))) (build-system emacs-build-system) (home-page "https://orgmode.org/") (synopsis "Outline-based notes management and organizer") @@ -7986,14 +8016,14 @@ programming and reproducible research.") (package (inherit emacs-org) (name "emacs-org-contrib") - (version "20191203") + (version "20191226") (source (origin (method url-fetch) (uri (string-append "https://orgmode.org/elpa/" "org-plus-contrib-" version ".tar")) (sha256 (base32 - "1kvw95492acb7gqn8gxbp1vg4fyw80w43yvflxnfxdf6jnnw2wah")))) + "08h6qiplvm7rvrb1pv2arwdlv6p31p0a6h0fk64kb79g6br8rk8i")))) (arguments `(#:modules ((guix build emacs-build-system) (guix build utils) @@ -9134,7 +9164,7 @@ to the home page or read the comments in the source file, (define-public emacs-htmlize (package (name "emacs-htmlize") - (version "1.53") + (version "1.55") (source (origin (method git-fetch) @@ -9143,7 +9173,7 @@ to the home page or read the comments in the source file, (commit (string-append "release/" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0dr235c0z8is3pi5xdgqyqljg6px0b2aya6qb79zkyi477bmz4ip")))) + (base32 "0gi3xshscpa53qrj8yplfsqahcilc2ybcc2p7gnh5nbnf2n1n97x")))) (build-system emacs-build-system) (home-page "https://github.com/hniksic/emacs-htmlize") (synopsis "Convert buffer text and decorations to HTML") @@ -11753,7 +11783,7 @@ standard Unix password manager\").") (define-public emacs-auth-source-pass (let ((commit "847a1f54ed48856b4dfaaa184583ef2c84173edf") - (revision "1")) + (revision "2")) (package (name "emacs-auth-source-pass") (version (git-version "5.0.0" revision commit)) @@ -11761,7 +11791,7 @@ standard Unix password manager\").") (origin (method git-fetch) (uri (git-reference - (url "https://github.com/NicolasPetton/auth-password-store.git") + (url "https://github.com/DamienCassou/auth-password-store.git") (commit commit))) (file-name (git-file-name name version)) (sha256 @@ -11773,7 +11803,7 @@ standard Unix password manager\").") "-L" "." "-l" "test/auth-source-pass-tests.el" "-f" "ert-run-tests-batch-and-exit"))) - (home-page "https://github.com/NicolasPetton/auth-password-store") + (home-page "https://github.com/DamienCassou/auth-password-store") (synopsis "Integrate @code{auth-source} with @code{password-store}") (description "This package helps Emacs integrate with the Unix @code{password-store} application.") @@ -15863,8 +15893,8 @@ Pandoc, the document-conversion tool.") (license license:bsd-3))) (define-public emacs-ccls - (let ((commit "b1acc336f27d8a3bbc750c2dc3be915a4ac1afea") - (revision "3")) + (let ((commit "aab3e31fd716daf59f9794e62d473357263e8cc0") + (revision "4")) (package (name "emacs-ccls") (version (git-version "0.1" revision commit)) @@ -15877,7 +15907,7 @@ Pandoc, the document-conversion tool.") (file-name (git-file-name name version)) (sha256 (base32 - "1qgfxc5d1hb32ks1fxpx7agpw7dvnkz99wydlflc9fqq75g8v142")))) + "1ykgw21ypyhwlyflppjcgqrj1xw4d9rld4z65qvwhk3f12cv113j")))) (build-system emacs-build-system) (propagated-inputs `(("ccls" ,ccls) @@ -15888,7 +15918,7 @@ Pandoc, the document-conversion tool.") (synopsis "Emacs support for the @code{ccls} language server") (description "This package extends @code{lsp-mode} to work with @code{C} and @code{C++} files through the @code{ccls} language server.") - (license license:bsd-3)))) + (license license:expat)))) (define-public emacs-org-brain (package @@ -19780,38 +19810,66 @@ contrast and few colors.") (license license:gpl3+)))) (define-public emacs-doom-themes - (package - (name "emacs-doom-themes") - (version "2.1.6") - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/hlissner/emacs-doom-themes.git") - (commit (string-append "v" version)))) - (file-name (git-file-name name version)) - (sha256 - (base32 "042pzcdhxi2z07jcscgjbaki9nrrm0cbgbbrnymd1r4q8ckkn8l9")))) - (build-system emacs-build-system) - (native-inputs - `(("emacs-ert-runner" ,emacs-ert-runner))) - (arguments - `(#:tests? #t - #:test-command '("ert-runner") - #:phases - (modify-phases %standard-phases - (add-after 'unpack 'move-themes - (lambda _ - ;; Move the source files to the top level, which is in the - ;; EMACSLOADPATH. - (for-each (lambda (f) - (rename-file f (basename f))) - (find-files "./themes" ".*\\.el$")) - #t))))) - (synopsis "Wide collection of color themes for Emacs") - (description "Emacs-doom-themes contains numerous popular color themes for + (let ((commit "c2d0ed3fe73e415d29e05d56da08ba41018eec4f") + (revision "3") + (version "2.1.6")) + (package + (name "emacs-doom-themes") + (version (git-version version revision commit)) + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/hlissner/emacs-doom-themes.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "1bdi7dkddyn0s357v2jv0mlhgsyc66kcvbl01ly370pqia6r0gpc")))) + (build-system emacs-build-system) + (native-inputs + `(("emacs-ert-runner" ,emacs-ert-runner))) + (arguments + `(#:tests? #t + #:test-command '("ert-runner") + #:modules ((guix build emacs-build-system) + (guix build utils) + (guix build emacs-utils) + (srfi srfi-1)) + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'move-themes + (lambda _ + ;; Move the source files to the top level, which is in the + ;; EMACSLOADPATH. + (for-each (lambda (f) + (rename-file f (basename f))) + (find-files "./themes" ".*\\.el$")) + #t)) + ;; There is a byte-code overflow issue in the latest checkout + ;; which affects byte-compilation for several (read `most') theme + ;; files. In order to cope with this issue, we disable + ;; byte-compilation until this issue is resolved. + ;; <https://github.com/hlissner/emacs-doom-themes/issues/314> + (add-after 'move-themes 'disable-breaking-compilation + (lambda _ + (for-each (lambda (file) + (chmod file #o600) ; needed to write changes. + (emacs-batch-disable-compilation file)) + (cons "doom-themes-ext-neotree.el" + ;; NOTE: When updating this package, determine + ;; whether changed theme files can byte-compile. + ;; If they can successfully byte-compile, add them + ;; to this list of exceptions. + (lset-difference string-contains + (find-files "." ".*-theme.el") + '("material" + "snazzy" + "tomorrow-day")))) + #t))))) + (synopsis "Wide collection of color themes for Emacs") + (description "Emacs-doom-themes contains numerous popular color themes for Emacs that integrate with major modes like Org-mode.") - (home-page "https://github.com/hlissner/emacs-doom-themes") - (license license:expat))) + (home-page "https://github.com/hlissner/emacs-doom-themes") + (license license:expat)))) (define-public emacs-modus-themes (package @@ -19840,6 +19898,30 @@ is cast on a light backdrop (Modus Operandi) and another where light text is displayed against a dark background (Modus Vivendi).") (license license:gpl3+))) +(define-public emacs-punpun-theme + (let ((commit "2f78125609277b2478abdebd8f9d5ee10a823b65") + (revision "0")) + (package + (name "emacs-punpun-theme") + (version (git-version "0" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/wasamasa/punpun-theme.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1sgxrj3igzq86h3whfymxf4qzv9kpvcrlhbvjmnp7fwrplys0n7d")))) + (build-system emacs-build-system) + (home-page "https://github.com/wasamasa/punpun-theme") + (synopsis "Bleak Emacs theme") + (description + "A bleak theme. Uses shades of gray and the occasional splash of +color. Designed for 256-color terminals. Comes in light and dark!") + (license license:gpl3+)))) + (define-public emacs-elixir-mode (package (name "emacs-elixir-mode") @@ -20045,34 +20127,35 @@ Google guidelines.") (license license:gpl3+)))) (define-public emacs-helm-fish-completion - (let ((commit "ef764dd123040fe67ef8b62a1c13842e940b0963") - (revision "1")) - (package - (name "emacs-helm-fish-completion") - (version (git-version "0.1" revision commit)) - (home-page "https://github.com/emacs-helm/helm-fish-completion") - (source - (origin - (method git-fetch) - (uri (git-reference - (url home-page) - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 "0k80kpapwfq2rv1lb0r994d0w6czl92xrmnkmrg0a05f4b3q0lb4")))) - (build-system emacs-build-system) - (propagated-inputs - `(("helm" ,emacs-helm) - ("fish-completion" ,emacs-fish-completion))) - (synopsis "Helm interface for Emacs fish-completion") - (description "Helm Fish Completion is a Helm interface for Emacs + (package + (name "emacs-helm-fish-completion") + (version "0.2") + (home-page "https://github.com/emacs-helm/helm-fish-completion") + (source + (origin + (method git-fetch) + (uri (git-reference + (url home-page) + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 "089gp2k22xwn33z8brpyb7r18vpyralq2cwxj1xsc8b2sj9s4896")))) + (build-system emacs-build-system) + (propagated-inputs + `(("helm" ,emacs-helm) + ("fish-completion" ,emacs-fish-completion))) + (synopsis "Helm interface for Emacs fish-completion") + (description "Helm Fish Completion is a Helm interface for Emacs fish-completion. It can be used in both Eshell and M-x shell.") - (license license:gpl3+)))) + (license license:gpl3+))) (define-public emacs-telega - (let ((commit "56aef884921d99e5170d5425dbe0fce645620511") - (revision "2") - (version "0.4.4")) + ;; This package has versions newer than indicated on MELPA. + ;; Get the current version from `telega-version` in telega.el. + ;; or by running M-x telega-version. + (let ((commit "9bfb637b2e71f5f293debd35abd627a064faf8ef") + (revision "1") + (version "0.5.4")) (package (name "emacs-telega") (version (git-version version revision commit)) @@ -20084,7 +20167,7 @@ fish-completion. It can be used in both Eshell and M-x shell.") (commit commit))) (sha256 (base32 - "0a8k3j20nz4xwswg9qp9xpaakk3q3ibiz8mkryk92zmrdmaah5mi")) + "06v8i3862n5kf2lnxii8vp9g8cq5ql51kr8yxh7l1wccsidri67a")) (file-name (git-file-name name version)))) (build-system gnu-build-system) (arguments @@ -20110,28 +20193,30 @@ fish-completion. It can be used in both Eshell and M-x shell.") (("python3 run_tests.py") "")) #t)) - ;; Modify telega-util to reflect unique dir name in - ;; `telega-install-data' phase. - (add-after 'unpack 'telega-data-patch - (lambda _ + (add-after 'unpack 'telega-paths-patch + (lambda* (#:key inputs #:allow-other-keys) + ;; Hard-code paths to `ffplay` and `ffmpeg`. + (let ((ffplay-bin (string-append (assoc-ref inputs "ffmpeg") + "/bin/ffplay")) + (ffmpeg-bin (string-append (assoc-ref inputs "ffmpeg") + "/bin/ffmpeg"))) + (substitute* "telega-ffplay.el" + (("\\(executable-find \"ffplay\"\\)") + (string-append + "(and (file-executable-p \"" ffplay-bin "\")" + "\"" ffplay-bin "\")")) + (("\\(executable-find \"ffmpeg\"\\)") + (string-append + "(and (file-executable-p \"" ffmpeg-bin "\")" + "\"" ffmpeg-bin "\")")))) + ;; Modify telega-util to reflect unique dir name in + ;; `telega-install-data' phase. (substitute* "telega-util.el" (("\\(concat \"etc/\" filename\\) telega--lib-directory") "(concat \"telega-data/\" filename) (locate-dominating-file telega--lib-directory \"telega-data\")")) #t)) - ;; The telega test suite checks for a version of Emacs - ;; compiled with imagemagick and svg support. Since we - ;; are using `emacs-minimal`, this step will fail. - ;; Grok the failing test, and remove problematic assertions. - (add-after 'unpack 'ert-suite-patch - (lambda _ - (substitute* "telega-core.el" - (("\\(image-type-available-p 'imagemagick\\) nil") - "t") - (("\\(image-type-available-p 'svg\\) nil") - "t")) - #t)) ;; The server test suite has a hardcoded path. ;; Reset this behavior to use the proper path. (add-after 'unpack 'server-suite-patch @@ -20146,7 +20231,6 @@ fish-completion. It can be used in both Eshell and M-x shell.") (invoke "python3" "server/run_tests.py") #t)) (delete 'configure) - ;; Build emacs-side using `emacs-build-system' (add-after 'compress-documentation 'emacs-add-source-to-load-path (assoc-ref emacs:%standard-phases 'add-source-to-load-path)) @@ -20165,23 +20249,26 @@ fish-completion. It can be used in both Eshell and M-x shell.") (assoc-ref emacs:%standard-phases 'build)) (add-after 'emacs-build 'emacs-make-autoloads (assoc-ref emacs:%standard-phases 'make-autoloads))))) + (inputs + `(("ffmpeg" ,ffmpeg))) ; mp4/gif support. (propagated-inputs - `(("emacs-visual-fill-column" ,emacs-visual-fill-column))) + `(("emacs-visual-fill-column" ,emacs-visual-fill-column) + ("libwebp" ,libwebp))) ; sticker support. (native-inputs `(("tdlib" ,tdlib) - ("emacs" ,emacs-minimal) + ("emacs" ,emacs) ("python" ,python))) (synopsis "GNU Emacs client for the Telegram messenger") (description - "Telega is full-featured, unofficial client for the Telegram messaging -platform for GNU Emacs.") + "Telega is a full-featured, unofficial GNU Emacs-based client for the +Telegram messaging platform.") (home-page "https://github.com/zevlg/telega.el") (license license:gpl3+)))) (define-public emacs-doom-modeline (package (name "emacs-doom-modeline") - (version "2.8.0") + (version "2.8.2") (source (origin (method git-fetch) (uri (git-reference @@ -20189,7 +20276,7 @@ platform for GNU Emacs.") (commit (string-append "v" version)))) (sha256 (base32 - "12zksk0rwpgpdc00km3z0hmc8wm1j1r8lbwn4kivniw56mgy0n22")) + "11srz1mr821axggs2jcmdhihxx09a2dniqv3n039wbdfaimfaidz")) (file-name (git-file-name name version)))) (build-system emacs-build-system) (arguments @@ -20494,3 +20581,73 @@ on removable volumes in Linux.") data, including buffers, window configuration, variables, and more.") (home-page "https://github.com/thierryvolpiatto/psession") (license license:gpl3+)))) + +(define-public emacs-parseedn + (package + (name "emacs-parseedn") + (version "0.1.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/clojure-emacs/parseedn.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "11wi3hwcgmy54p6ivpijqm7v0hj6j75a19qk5z779bqfrp79b4pc")))) + (build-system emacs-build-system) + (propagated-inputs + `(("emacs-a" ,emacs-a) + ("emacs-parseclj" ,emacs-parseclj))) + (home-page "https://cider.mx") + (synopsis "EDN parser for Emacs Lisp") + (description + "An Emacs Lisp library for parsing EDN (Clojure) data. +It uses parseclj's shift-reduce parser internally.") + (license license:gpl3+))) + +(define-public emacs-parseclj + (package + (name "emacs-parseclj") + (version "0.1.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/clojure-emacs/parseclj.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "03bm5dm4hmkqimv4wqxjjh5814pxysmm7z54bv2rf7zwv1x7dggr")))) + (build-system emacs-build-system) + (propagated-inputs `(("emacs-a" ,emacs-a))) + (home-page "https://cider.mx") + (synopsis "Clojure parser for Emacs Lisp") + (description + "An Emacs Lisp library for parsing Clojure code and EDN data. +It supports several input and output formats, all powered by the +same shift-reduce parser function.") + (license license:gpl3+))) + +(define-public emacs-hide-mode-line + (package + (name "emacs-hide-mode-line") + (version "1.0.2") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/hlissner/emacs-hide-mode-line.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0dfzjgxfkcw4wisbyldsm1km18pfp9j8xgadn6qnsz11l55bpgyp")))) + (build-system emacs-build-system) + (synopsis "Emacs plugin that hides the mode-line") + (description "A minor mode that hides the mode-line in your current +buffer. It can be used to toggle an alternative mode-line, toggle its visibility, +or simply disable the mode-line in buffers where it is not very useful.") + (home-page "https://github.com/hlissner/emacs-hide-mode-line") + (license license:expat))) diff --git a/gnu/packages/emacs.scm b/gnu/packages/emacs.scm index eba7f88551..ebe47d7186 100644 --- a/gnu/packages/emacs.scm +++ b/gnu/packages/emacs.scm @@ -17,6 +17,9 @@ ;;; Copyright © 2018 Mathieu Othacehe <m.othacehe@gmail.com> ;;; Copyright © 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2019 Jesse John Gildersleve <jessejohngildersleve@zohomail.eu> +;;; Copyright © 2019 Valentin Ignatev <valentignatev@gmail.com> +;;; Copyright © 2019 Leo Prikler <leo.prikler@student.tugraz.at> +;;; Copyright © 2019 Amin Bandali <bandali@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -61,6 +64,7 @@ #:use-module (gnu packages pkg-config) #:use-module (gnu packages texinfo) #:use-module (gnu packages tls) + #:use-module (gnu packages web) ; for jansson #:use-module (gnu packages webkit) #:use-module (gnu packages xml) #:use-module (gnu packages xorg) @@ -83,14 +87,20 @@ "emacs-source-date-epoch.patch")) (modules '((guix build utils))) (snippet - ;; Delete the bundled byte-compiled elisp files and - ;; generated autoloads. '(with-directory-excursion "lisp" + ;; Delete the bundled byte-compiled elisp files and generated + ;; autoloads. (for-each delete-file (append (find-files "." "\\.elc$") (find-files "." "loaddefs\\.el$") ;; This is the only "autoloads" file that ;; does not have "*loaddefs.el" name. + ;; TODO: Next time changing this package, + ;; replace the following with a call to + ;; `find-files', so that `delete-file' + ;; wouldn't error out when the file is + ;; missing, making the entire snippet field + ;; reusable as-is for `emacs-next' below. '("eshell/esh-groups.el"))) ;; Make sure Tramp looks for binaries in the right places on @@ -211,6 +221,102 @@ large Lisp programs. It has full Unicode support for nearly all human languages.") (license license:gpl3+))) +(define-public emacs-next + (let ((commit "36abf6864604b3061c2e070f8997491fa2bce44c") + (revision "0") + (emacs-version "27.0.50")) + (package + (inherit emacs) + (name "emacs-next") + (version (git-version emacs-version revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://git.savannah.gnu.org/git/emacs.git") + (commit commit))) + (sha256 + (base32 "1ckn607p0clz0dhhlizvv7l03p4nminy48h53xrpz55w4rcrcm2l")) + (file-name (git-file-name name version)) + (patches (search-patches "emacs27-exec-path.patch" + "emacs-fix-scheme-indent-function.patch" + "emacs-source-date-epoch.patch")) + (modules (origin-modules (package-source emacs))) + ;; TODO: once the snippet for `emacs' is changed to not fail when + ;; eshell/esh-groups.el does not exist, replace this snippet with + ;; (snippet (origin-snippet (package-source emacs))))). + (snippet + '(with-directory-excursion "lisp" + ;; Make sure Tramp looks for binaries in the right places on + ;; remote Guix System machines, where 'getconf PATH' returns + ;; something bogus. + (substitute* "net/tramp-sh.el" + ;; Patch the line after "(defcustom tramp-remote-path". + (("\\(tramp-default-remote-path") + (format #f "(tramp-default-remote-path ~s ~s ~s ~s " + "~/.guix-profile/bin" "~/.guix-profile/sbin" + "/run/current-system/profile/bin" + "/run/current-system/profile/sbin"))) + + ;; Make sure Man looks for C header files in the right + ;; places. + (substitute* "man.el" + (("\"/usr/local/include\"" line) + (string-join + (list line + "\"~/.guix-profile/include\"" + "\"/var/guix/profiles/system/profile/include\"") + " "))) + #t)))) + (arguments + (substitute-keyword-arguments (package-arguments emacs) + ((#:phases phases) + `(modify-phases ,phases + ;; The 'reset-gzip-timestamps phase will throw a + ;; permission error if gzip files aren't writable then + (add-before + 'reset-gzip-timestamps + 'make-compressed-files-writable + (lambda _ + (for-each make-file-writable + (find-files %output ".*\\.t?gz$")) + #t)) + ;; restore the dump file that Emacs installs somewhere in + ;; libexec/ to its original state + (add-after 'glib-or-gtk-wrap 'restore-emacs-pdmp + (lambda* (#:key outputs target #:allow-other-keys) + (let* ((libexec (string-append (assoc-ref outputs "out") + "/libexec")) + ;; each of these find-files should return one file + (pdmp (find-files libexec "^emacs\\.pdmp$")) + (pdmp-real (find-files libexec + "^\\.emacs\\.pdmp-real$"))) + (for-each (lambda (wrapper real) + (delete-file wrapper) + (rename-file real wrapper)) + pdmp pdmp-real) + #t))))))) + (inputs + `(("jansson" ,jansson) + ,@(package-inputs emacs))) + (native-inputs + `(("autoconf" ,autoconf) ; needed when building from trunk + ,@(package-native-inputs emacs))) + + ;; TODO: consider changing `emacs' to use a more robust way of + ;; specifying version for "EMACSLOADPATH", so as to avoid having to + ;; duplicate native-search-paths here. + (native-search-paths + (list (search-path-specification + (variable "EMACSLOADPATH") + ;; The versioned entry is for the Emacs' builtin libraries. + (files + (list "share/emacs/site-lisp" + (string-append "share/emacs/" emacs-version "/lisp")))) + (search-path-specification + (variable "INFOPATH") + (files '("share/info")))))))) + (define-public emacs-minimal ;; This is the version that you should use as an input to packages that just ;; need to byte-compile .el files. diff --git a/gnu/packages/embedded.scm b/gnu/packages/embedded.scm index 4087e042c6..67c6fdafdc 100644 --- a/gnu/packages/embedded.scm +++ b/gnu/packages/embedded.scm @@ -207,6 +207,124 @@ usable on embedded products.") "--disable-nls")))) (synopsis "Newlib variant for small systems with limited memory"))) + +;;; The following definitions are for the "7-2018-q2-update" variant of the +;;; ARM cross toolchain as offered on https://developer.arm.com +(define-public gcc-arm-none-eabi-7-2018-q2-update + (let ((xgcc (cross-gcc "arm-none-eabi" + #:xgcc gcc-7 + #:xbinutils (cross-binutils "arm-none-eabi"))) + (revision "1") + (svn-revision 261907)) + (package (inherit xgcc) + (version (string-append "7-2018-q2-update-" + revision "." (number->string svn-revision))) + (source + (origin + (method svn-fetch) + (uri (svn-reference + (url "svn://gcc.gnu.org/svn/gcc/branches/ARM/embedded-7-branch/") + (revision svn-revision))) + (file-name (string-append "gcc-arm-embedded-" version "-checkout")) + (sha256 + (base32 + "192ggs63bixf3irpijgfkjks73yx1r3a4i6grk1y0i0iny76pmx5")) + (patches + (append + (origin-patches (package-source gcc-7)) + (search-patches "gcc-7-cross-environment-variables.patch"))))) + (native-inputs + `(("gcc" ,gcc-5) + ("flex" ,flex) + ("isl" ,isl-0.18) + ,@(alist-delete "isl" (package-native-inputs xgcc)))) + (arguments + (substitute-keyword-arguments (package-arguments xgcc) + ((#:phases phases) + `(modify-phases ,phases + (add-after 'unpack 'expand-version-string + (lambda _ + (make-file-writable "gcc/DEV-PHASE") + (with-output-to-file "gcc/DEV-PHASE" + (lambda () + (display "7-2018-q2-update"))) + #t)) + (add-after 'unpack 'fix-genmultilib + (lambda _ + (substitute* "gcc/genmultilib" + (("#!/bin/sh") (string-append "#!" (which "sh")))) + #t)))) + ((#:configure-flags flags) + ;; The configure flags are largely identical to the flags used by the + ;; "GCC ARM embedded" project. + `(append (list "--enable-multilib" + "--with-newlib" + "--with-multilib-list=rmprofile" + "--with-host-libstdcxx=-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm" + "--enable-plugins" + "--disable-decimal-float" + "--disable-libffi" + "--disable-libgomp" + "--disable-libmudflap" + "--disable-libquadmath" + "--disable-libssp" + "--disable-libstdcxx-pch" + "--disable-nls" + "--disable-shared" + "--disable-threads" + "--disable-tls") + (delete "--disable-multilib" ,flags))))) + (native-search-paths + (list (search-path-specification + (variable "CROSS_C_INCLUDE_PATH") + (files '("arm-none-eabi/include"))) + (search-path-specification + (variable "CROSS_CPLUS_INCLUDE_PATH") + (files '("arm-none-eabi/include"))) + (search-path-specification + (variable "CROSS_LIBRARY_PATH") + (files '("arm-none-eabi/lib")))))))) + +(define-public newlib-arm-none-eabi-7-2018-q2-update + ;; This is the same commit as used for the 7-2018-q2-update release + ;; according to the release.txt. + (let ((commit "3ccfb407af410ba7e54ea0da11ae1e40b554a6f4") + (revision "0")) + (package + (inherit newlib-arm-none-eabi) + (version (git-version "3.0.0" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "http://sourceware.org/git/newlib-cygwin.git") + (commit commit))) + (file-name (git-file-name "newlib" commit)) + (sha256 + (base32 + "1dq23fqrk75g1a4v7569fvnnw5q440zawbxi3w0g05n8jlqsmvcy")))) + (arguments + (substitute-keyword-arguments (package-arguments newlib-arm-none-eabi) + ;; The configure flags are identical to the flags used by the "GCC ARM + ;; embedded" project. + ((#:configure-flags flags) + `(cons* "--enable-newlib-io-c99-formats" + "--enable-newlib-retargetable-locking" + "--with-headers=yes" + ,flags)))) + (native-inputs + `(("xbinutils" ,(cross-binutils "arm-none-eabi")) + ("xgcc" ,gcc-arm-none-eabi-7-2018-q2-update) + ("texinfo" ,texinfo)))))) + +(define-public newlib-nano-arm-none-eabi-7-2018-q2-update + (package (inherit newlib-arm-none-eabi-7-2018-q2-update) + (name "newlib-nano") + (arguments + (package-arguments newlib-nano-arm-none-eabi)) + (synopsis "Newlib variant for small systems with limited memory"))) + + (define (make-libstdc++-arm-none-eabi xgcc newlib) (let ((libstdc++ (make-libstdc++ xgcc))) (package (inherit libstdc++) @@ -287,6 +405,14 @@ languages are C and C++.") (arm-none-eabi-toolchain gcc-arm-none-eabi-6 newlib-nano-arm-none-eabi)) +(define-public arm-none-eabi-toolchain-7-2018-q2-update + (arm-none-eabi-toolchain gcc-arm-none-eabi-7-2018-q2-update + newlib-arm-none-eabi-7-2018-q2-update)) + +(define-public arm-none-eabi-nano-toolchain-7-2018-q2-update + (arm-none-eabi-toolchain gcc-arm-none-eabi-7-2018-q2-update + newlib-nano-arm-none-eabi-7-2018-q2-update)) + (define-public gdb-arm-none-eabi (package (inherit gdb) diff --git a/gnu/packages/emulators.scm b/gnu/packages/emulators.scm index 0ab6ee7c9a..63c1332c2f 100644 --- a/gnu/packages/emulators.scm +++ b/gnu/packages/emulators.scm @@ -1162,6 +1162,20 @@ multi-system game/emulator system.") #:configure-flags (list "--enable-release") ;for optimizations #:phases (modify-phases %standard-phases + (add-after 'unpack 'fix-build + ;; XXX: The following works around a build failure introduced when + ;; Fluidsynth was updated to version 2.1. It has been applied + ;; upstream as 68758a879e0c8ecc0d40962516d4e808aa4e15e5 and can be + ;; removed once ScummVM 2.1.1+ is out. + (lambda _ + (substitute* "audio/softsynth/fluidsynth.cpp" + (("#include <fluidsynth.h>") "") + (("#include \"common/scummsys.h\"") "#include \"config.h\"") + (("#include \"common/config-manager.h\"" line) + (string-append "#include <fluidsynth.h>\n" + "#include \"common/scummsys.h\"\n" + line))) + #t)) (replace 'configure ;; configure does not work followed by both "SHELL=..." and ;; "CONFIG_SHELL=..."; set environment variables instead @@ -1204,7 +1218,7 @@ play them on systems for which they were never designed!") (define-public mame (package (name "mame") - (version "0.216") + (version "0.217") (source (origin (method git-fetch) @@ -1214,7 +1228,7 @@ play them on systems for which they were never designed!") (file-name (git-file-name name version)) (sha256 (base32 - "1q3mrlinkg3hxry7ssl5713lclz3k243q30933flxh99fnzgajwc")) + "03h4d0d8lh6djjff3zqhjm14klc9n129yzwygdqppz0f43w97cmw")) (modules '((guix build utils))) (snippet ;; Remove bundled libraries. diff --git a/gnu/packages/engineering.scm b/gnu/packages/engineering.scm index c5e2f58aeb..9ace45ba5c 100644 --- a/gnu/packages/engineering.scm +++ b/gnu/packages/engineering.scm @@ -186,16 +186,16 @@ plans and designs.") (define-public geda-gaf (package (name "geda-gaf") - (version "1.9.2") + (version "1.10.0") (source (origin (method url-fetch) (uri (string-append - "http://ftp.geda-project.org/geda-gaf/unstable/v" + "http://ftp.geda-project.org/geda-gaf/stable/v" (version-major+minor version) "/" version "/geda-gaf-" version ".tar.gz")) (sha256 (base32 - "14mk45pfz11v54q66gafw2l68n1p5ssvvjmdm8ffgc8x1w5ajfrz")))) + "06ivgarvwbzjz2wigxzzkm8iszldi2p6x3a6jnlczjyrz4csddsy")))) (build-system gnu-build-system) (arguments '(#:phases @@ -205,12 +205,14 @@ plans and designs.") (lambda _ (setenv "HOME" (getenv "TMPDIR")) #t)) - ;; FIXME: These two tests fail for unknown reasons. They return "2" - ;; when they should return "1". (add-after 'unpack 'disable-failing-tests (lambda _ - (substitute* "utils/tests/gxyrs/tests.list" - (("^do_nothing.*") "")) + (substitute* "xorn/tests/Makefile.in" + (("-Werror") "")) + ;; This test returns its correct result in an unexpected order. + (substitute* "libgeda/scheme/unit-tests/t0402-config.scm" + (("\\(begin-config-test 'config-keys" m) + (string-append "#;" m))) #t))) #:configure-flags (let ((pcb (assoc-ref %build-inputs "pcb"))) @@ -219,13 +221,15 @@ plans and designs.") pcb "/share/pcb/pcblib-newlib:" pcb "/share/pcb/newlib"))))) (inputs - `(("glib" ,glib) + `(("gamin" ,gamin) + ("glib" ,glib) ("gtk" ,gtk+-2) ("guile" ,guile-2.0) ("desktop-file-utils" ,desktop-file-utils) ("shared-mime-info" ,shared-mime-info) ("m4" ,m4) - ("pcb" ,pcb))) + ("pcb" ,pcb) + ("python" ,python-2))) ; for xorn (native-inputs `(("pkg-config" ,pkg-config) ("perl" ,perl))) ; for tests @@ -248,14 +252,14 @@ utilities.") (package (inherit geda-gaf) (name "lepton-eda") - (version "1.9.5-20180820") + (version "1.9.9-20191003") (home-page "https://github.com/lepton-eda/lepton-eda") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit version))) (sha256 (base32 - "1ayaccvw18zh4g7a4x5jf6yxkphi5xafb0hpc732g59qkgwfcmlr")) + "08cc3zfk84qq9mrkc9pp4r9jlavvm01wwy0yd9frql68w2zw6mip")) (file-name (git-file-name name version)))) (native-inputs `(("autoconf" ,autoconf) @@ -266,7 +270,14 @@ utilities.") ("groff" ,groff) ("which" ,which) ,@(package-native-inputs geda-gaf))) - ;; For now it's Guile 2.0, not 2.2. + (inputs + `(("glib" ,glib) + ("gtk" ,gtk+-2) + ("guile" ,guile-2.2) + ("desktop-file-utils" ,desktop-file-utils) + ("shared-mime-info" ,shared-mime-info) + ("m4" ,m4) + ("pcb" ,pcb))) (arguments (substitute-keyword-arguments (package-arguments geda-gaf) ((#:configure-flags flags ''()) @@ -300,6 +311,17 @@ utilities.") ,(string-take version (string-index version #\-))) (format port "#define PACKAGE_GIT_COMMIT \"cabbag3\"~%"))) + #t)) + (add-after 'install 'compile-scheme-files + (lambda* (#:key outputs #:allow-other-keys) + (invoke "make" "precompile") + (for-each (lambda (program) + (wrap-program program + `("GUILE_LOAD_COMPILED_PATH" ":" prefix + (,(string-append (assoc-ref outputs "out") + "/share/lepton-eda/ccache/"))))) + (find-files (string-append (assoc-ref outputs "out") "/bin") + ".*")) #t)))))) (description "Lepton EDA ia an @dfn{electronic design automation} (EDA) tool set @@ -713,8 +735,8 @@ fonts to gEDA.") (license license:gpl2+)))) (define-public libfive - (let ((commit "9d857d1923abecb0e5935b9287d22661f6efaac5") - (revision "2")) + (let ((commit "6e39254e57c179459bb929df49ae96a6017a0ed6") + (revision "3")) (package (name "libfive") (version (git-version "0" revision commit)) @@ -725,7 +747,7 @@ fonts to gEDA.") (commit commit))) (sha256 (base32 - "1r40kyx30wz31cwwlfvfh7fgqkxq3n8dxhswpi9qpf4r5h3l8wsn")) + "0ryv2hcbrwqc087w7rrs4a2irkcpmqync00g4dh8n7jn10w2jkim")) (file-name (git-file-name name version)) (snippet ;; Remove bundled catch since we provide our own. @@ -740,12 +762,18 @@ fonts to gEDA.") (add-after 'unpack 'remove-native-compilation (lambda _ (substitute* "CMakeLists.txt" (("-march=native") "")) + #t)) + (add-after 'unpack 'find-catch + (lambda* (#:key inputs #:allow-other-keys) + (setenv "CPLUS_INCLUDE_PATH" + (string-append (assoc-ref inputs "catch") + "/include/catch")) #t))))) (native-inputs `(("pkg-config" ,pkg-config))) (inputs `(("boost" ,boost) - ("catch" ,catch-framework) + ("catch" ,catch-framework2) ("libpng" ,libpng) ("qtbase" ,qtbase) ("eigen" ,eigen) @@ -758,7 +786,7 @@ libfive, solid models are defined as Scheme scripts, and there are no opaque function calls into the geometry kernel: everything is visible to the user. Even fundamental, primitive shapes are represented as code in the user-level language.") - (license (list license:lgpl2.1+ ;library + (license (list license:mpl2.0 ;library license:gpl2+))))) ;Guile bindings and GUI (define-public ao diff --git a/gnu/packages/file-systems.scm b/gnu/packages/file-systems.scm index 1594cac846..cb0a2a25bb 100644 --- a/gnu/packages/file-systems.scm +++ b/gnu/packages/file-systems.scm @@ -3,6 +3,7 @@ ;;; Copyright © 2017 Gábor Boskovits <boskovits@gmail.com> ;;; Copyright © 2017, 2018 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2018 Leo Famulari <leo@famulari.name> +;;; Copyright © 2019 Efraim Flashner <efraim@flashner.co.il> ;;; ;;; This file is part of GNU Guix. ;;; @@ -26,6 +27,7 @@ #:use-module (guix git-download) #:use-module (guix build-system cmake) #:use-module (guix build-system gnu) + #:use-module (guix build-system linux-module) #:use-module (guix utils) #:use-module (gnu packages) #:use-module (gnu packages acl) @@ -40,7 +42,9 @@ #:use-module (gnu packages docbook) #:use-module (gnu packages flex) #:use-module (gnu packages glib) + #:use-module (gnu packages libffi) #:use-module (gnu packages linux) + #:use-module (gnu packages nfs) #:use-module (gnu packages onc-rpc) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) @@ -56,8 +60,8 @@ (source (origin (method url-fetch) - (uri (string-append "mirror://sourceforge/httpfs/" name "/" - name "-" version ".tar.gz")) + (uri (string-append "mirror://sourceforge/httpfs/httpfs2/" + "httpfs2-" version ".tar.gz")) (sha256 (base32 "1h8ggvhw30n2r6w11n1s458ypggdqx6ldwd61ma4yd7binrlpjq1")))) @@ -322,3 +326,113 @@ to read all files, and it does not support all the compression methods in APFS.") (home-page "https://github.com/sgan81/apfs-fuse") (license license:gpl2+)))) + +(define-public zfs + (package + (name "zfs") + (version "0.8.2") + (outputs '("out" "module" "src")) + (source + (origin + (method url-fetch) + (uri (string-append "https://github.com/zfsonlinux/zfs/releases" + "/download/zfs-" version + "/zfs-" version ".tar.gz")) + (sha256 + (base32 + "1f7aig15q3z832pr2n48j3clafic2yk1vvqlh28vpklfghjqwq27")))) + (build-system linux-module-build-system) + (arguments + `(;; The ZFS kernel module should not be downloaded since the license + ;; terms don't allow for distributing it, only building it locally. + #:substitutable? #f + ;; Tests cannot run in an unprivileged build environment. + #:tests? #f + #:phases + (modify-phases %standard-phases + (add-after 'configure 'really-configure + (lambda* (#:key outputs inputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (substitute* "configure" + (("-/bin/sh") (string-append "-" (which "sh"))) + ((" /bin/sh") (string-append " " (which "sh")))) + (invoke "./configure" + "--with-config=all" + (string-append "--prefix=" out) + (string-append "--with-dracutdir=" out "/lib/dracut") + (string-append "--with-udevdir=" out "/lib/udev") + (string-append "--with-mounthelperdir=" out "/sbin") + (string-append "--with-linux=" + (assoc-ref inputs "linux-module-builder") + "/lib/modules/build"))))) + (add-after 'unpack 'patch-source + (lambda* (#:key inputs outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (src (assoc-ref outputs "src")) + (util-linux (assoc-ref inputs "util-linux")) + (nfs-utils (assoc-ref inputs "nfs-utils"))) + (substitute* "module/zfs/zfs_ctldir.c" + (("/usr/bin/env\", \"umount") + (string-append util-linux "/bin/umount\", \"-n")) + (("/usr/bin/env\", \"mount") + (string-append util-linux "/bin/mount\", \"-n"))) + (substitute* "lib/libzfs/libzfs_mount.c" + (("/bin/mount") (string-append util-linux "/bin/mount")) + (("/bin/umount") (string-append util-linux "/bin/umount"))) + (substitute* "lib/libshare/nfs.c" + (("/usr/sbin/exportfs") + (string-append nfs-utils "/sbin/exportfs"))) + (substitute* "config/zfs-build.m4" + (("\\$sysconfdir/init.d") (string-append out "/etc/init.d"))) + (substitute* '("etc/zfs/Makefile.am" + "cmd/zed/Makefile.am") + (("\\$\\(sysconfdir)") (string-append out "/etc"))) + (substitute* "cmd/vdev_id/vdev_id" + (("PATH=/bin:/sbin:/usr/bin:/usr/sbin") + (string-append "PATH=" + (dirname (which "chmod")) ":" + (dirname (which "grep")) ":" + (dirname (which "sed")) ":" + (dirname (which "gawk"))))) + (substitute* "contrib/pyzfs/Makefile.in" + ((".*install-lib.*") "")) + (substitute* '("Makefile.am" "Makefile.in") + (("\\$\\(prefix)/src") (string-append src "/src")))) + #t)) + (replace 'build + (lambda _ (invoke "make"))) + (replace 'install + (lambda* (#:key outputs inputs native-inputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (moddir (assoc-ref outputs "module")) + (kmod (assoc-ref (or native-inputs inputs) "kmod"))) + (invoke "make" "install" + (string-append "DEFAULT_INITCONF_DIR=" out "/etc/default") + (string-append "DEPMOD=" kmod "/bin/depmod") + (string-append "INSTALL_PATH=" out) + (string-append "INSTALL_MOD_PATH=" moddir) + "INSTALL_MOD_STRIP=1") + (install-file "contrib/bash_completion.d/zfs" + (string-append out "/share/bash-completion/completions")) + (symlink "../share/pkgconfig/" (string-append out "/lib/pkgconfig")) + #t)))))) + (native-inputs + `(("attr" ,attr) + ("pkg-config" ,pkg-config))) + (inputs + `(("eudev" ,eudev) + ("libaio" ,libaio) + ("libtirpc" ,libtirpc) + ("nfs-utils" ,nfs-utils) + ("openssl" ,openssl) + ("python" ,python) + ("python-cffi" ,python-cffi) + ("util-linux" ,util-linux) + ("zlib" ,zlib))) + (home-page "https://zfsonlinux.org/") + (synopsis "Native ZFS on Linux") + (description + "ZFS on Linux is an advanced file system and volume manager which was +originally developed for Solaris and is now maintained by the OpenZFS +community.") + (license license:cddl1.0))) diff --git a/gnu/packages/finance.scm b/gnu/packages/finance.scm index 5588fe00ea..ce3033c054 100644 --- a/gnu/packages/finance.scm +++ b/gnu/packages/finance.scm @@ -445,28 +445,31 @@ other machines/servers. Electrum does not download the Bitcoin blockchain.") (package (inherit electrum) (name "electron-cash") - (version "4.0.10") + (version "4.0.12") (source (origin - (method url-fetch) - (uri (string-append "https://electroncash.org/downloads/" - version - "/win-linux/Electron-Cash-" - version - ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/Electron-Cash/Electron-Cash.git") + (commit version))) + (file-name (git-file-name name version)) (sha256 (base32 - "1rcywlma6hk52ymisx536jvkdwa73rhn1jxhsbs4wbvajl90w9s8")) - (modules '((guix build utils))) - (snippet - '(begin - ;; Delete the bundled dependencies. - (delete-file-recursively "packages") - #t)))) + "0gidrx8499v7rig7ljhd70wssshs1qm0gp1553g70i323hcbf62x")))) (inputs `(,@(package-inputs electrum) + ("libsecp256k1", libsecp256k1) ("python-dateutil", python-dateutil) ("python-dnspython", python-dnspython))) + (arguments + (substitute-keyword-arguments (package-arguments electrum) + ((#:phases phases) + `(modify-phases ,phases + (add-after 'unpack 'use-libsecp256k1-input + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "lib/secp256k1.py" + (("library_paths = .* 'libsecp256k1.so.0'.") + (string-append "library_paths = ('" (assoc-ref inputs "libsecp256k1") "/lib/libsecp256k1.so.0'"))))))))) (home-page "https://electroncash.org/") (synopsis "Bitcoin Cash wallet") (description diff --git a/gnu/packages/freedesktop.scm b/gnu/packages/freedesktop.scm index 87b7c16b0b..2096cdb49f 100644 --- a/gnu/packages/freedesktop.scm +++ b/gnu/packages/freedesktop.scm @@ -5,7 +5,7 @@ ;;; Copyright © 2015, 2016, 2017, 2019 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2015, 2017, 2018, 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2015 David Hashe <david.hashe@dhashe.com> -;;; Copyright © 2016, 2017 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2016, 2017, 2019 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2016 Kei Kebreau <kkebreau@posteo.net> ;;; Copyright © 2017, 2018 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2017, 2018, 2019 Marius Bakke <mbakke@fastmail.com> @@ -209,13 +209,14 @@ other applications that need to directly deal with input devices.") (name "libxdg-basedir") (version "1.2.0") (source (origin - (method url-fetch) - (uri (string-append - "https://github.com/devnev/libxdg-basedir/archive/" - name "-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/devnev/libxdg-basedir") + (commit (string-append name "-" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "0s28c7sfwqimsmb3kn91mx7wi55fs3flhbmynl9k60rrllr00aqw")))) + "12yz53ny5bi2dii3zwcr6b9ay0yy1g1xv13jg097k7gjligcq11m")))) (build-system gnu-build-system) (arguments '(#:phases diff --git a/gnu/packages/game-development.scm b/gnu/packages/game-development.scm index 833f00b77c..febe15fa57 100644 --- a/gnu/packages/game-development.scm +++ b/gnu/packages/game-development.scm @@ -16,6 +16,7 @@ ;;; Copyright © 2018 Marius Bakke <mbakke@fastmail.com> ;;; Copyright © 2019 Pierre Neidhardt <mail@ambrevar.xyz> ;;; Copyright © 2019 Leo Prikler <leo.prikler@student.tugraz.at> +;;; Copyright © 2019 Jethro Cao <jethrocao@gmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -653,6 +654,37 @@ programming language.") (home-page "https://love2d.org/") (license license:zlib))) +(define-public love-nuklear + (let ((version "v2.6") + (commit "fef4e00a602efb16c57ae962850b6e7a01f7a29a")) + (package + (name "love-nuklear") + (version (git-version version "1" commit)) + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/keharriso/love-nuklear/") + (commit commit) + (recursive? #t))) + ;; NOTE: the HEAD of the Nuklear git-submodule is at commit + ;; "adc52d710fe3c87194b99f540c53e82eb75c2521" of Oct 1 2019 + (file-name (git-file-name name version)) + (sha256 + (base32 + "15qmy8mfwkxy2x9rmxs6f9cyvjvwwj6yf78bs863xmc56dmjzzbn")))) + (build-system cmake-build-system) + (arguments + `(#:build-type "Release" + #:tests? #f)) + (inputs + `(("luajit" ,luajit))) + (synopsis "Lightweight immediate mode GUI for LÖVE games") + (description "LÖVE is a Lua framework for making 2D games. Nuklear +is a minimal state immediate mode graphical user interface toolkit. This +package is the Nuklear bindings for LÖVE created by Kevin Harrison.") + (home-page "https://github.com/keharriso/love-nuklear/") + (license license:expat)))) + (define-public allegro-4 (package (name "allegro") diff --git a/gnu/packages/games.scm b/gnu/packages/games.scm index f3cce6c508..6e6490412d 100644 --- a/gnu/packages/games.scm +++ b/gnu/packages/games.scm @@ -502,6 +502,45 @@ cows can think too: all you have to do is run @command{cowthink}. If you're tired of cows, a variety of other ASCII-art messengers are available.") (license license:gpl3+))) +(define-public lolcat + (let ((commit "35dca3d0a381496d7195cd78f5b24aa7b62f2154") + (revision "0")) + (package + (name "lolcat") + (version (git-version "1.0" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/jaseg/lolcat.git") + (commit commit))) + (sha256 + (base32 + "0jjbkqcc2ikjxd1xgdyv4rb0vsw218181h89f2ywg29ffs3ypd8g")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (arguments + `(#:tests? #f ;; no check target + #:make-flags (list "CC=gcc") + #:phases + (modify-phases %standard-phases + (delete 'bootstrap) + (delete 'configure) + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (dest (string-append out "/bin"))) + (mkdir-p dest) + (install-file "lolcat" dest) + (install-file "censor" dest) + #t)))))) + (home-page "https://github.com/jaseg/lolcat") + (synopsis "Rainbow coloring effect for text console display") + (description "@command{lolcat} concatenates files and streams like +regular @command{cat}, but it also adds terminal escape codes between +characters and lines resulting in a rainbow effect.") + (license license:wtfpl2)))) + (define-public freedoom (package (name "freedoom") @@ -907,7 +946,7 @@ watch your CPU playing while enjoying a cup of tea!") (define-public nethack (package (name "nethack") - (version "3.6.2") + (version "3.6.4") (source (origin (method url-fetch) @@ -915,7 +954,7 @@ watch your CPU playing while enjoying a cup of tea!") (string-append "https://www.nethack.org/download/" version "/nethack-" (string-join (string-split version #\.) "") "-src.tgz")) (sha256 - (base32 "07fvkm3v11a4pjrq2f66vjslljsvk6raal53skn4gqsfdbd0ml7v")))) + (base32 "0ndxgnsprwgjnk0qb24iljkpijnfncgvfb3h3zb129h3cs2anc85")))) (inputs `(("ncurses" ,ncurses) ("bison" ,bison) @@ -7915,7 +7954,6 @@ can be downloaded from @url{https://zero.sjeng.org/best-network}.") "/src/ktuberling-" version ".tar.xz")) (sha256 (base32 "1qdf4q6wjh1lnlqw5c8z4rpj9w5vbyjfri1dah6yjm3mwppbc12j")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -7965,7 +8003,6 @@ This package is part of the KDE games module.") "/src/picmi-" version ".tar.xz")) (sha256 (base32 "0z9mpmv49w914gqdx274brdzl6d1bz9j9nkvbwgmr3iq1ba49m3f")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8003,7 +8040,6 @@ This package is part of the KDE games module.") "/src/kolf-" version ".tar.xz")) (sha256 (base32 "06sfd0llr5cc3zf1vrpcxgw9bm009ky7y8822kynic9ipcd4z1hw")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8083,7 +8119,6 @@ other Mah Jongg like games.") version "/src/kmahjongg-" version ".tar.xz")) (sha256 (base32 "08na845h0nhmfrszdmvfq5y1dy7kgbrlzjp0f5snvbbf7w44ci6p")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8124,7 +8159,6 @@ This package is part of the KDE games module.") version "/src/kshisen-" version ".tar.xz")) (sha256 (base32 "1bq5m48af4h5apfp3bfsp76nlpv6h5sc0gd544zv7cgpfznz1sds")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8164,7 +8198,6 @@ This package is part of the KDE games module.") version "/src/kajongg-" version ".tar.xz")) (sha256 (base32 "0ql6p5zifdpdf65r7ki9ml123azpwwk9x3x8r9ij6xhjnf7p7x6w")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8209,7 +8242,6 @@ This package is part of the KDE games module.") "/src/kbreakout-" version ".tar.xz")) (sha256 (base32 "0gwzx1z9mxrjlcjzglg8cxkyd6900whcar3b5j9laxxarc6xhj8w")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8248,7 +8280,6 @@ This package is part of the KDE games module.") "/src/kmines-" version ".tar.xz")) (sha256 (base32 "0ac3za36lh8hpx6mqfic9amwmzhzhzplm9hg3pw12gxl5a9mvfsf")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8287,7 +8318,6 @@ This package is part of the KDE games module.") version "/src/konquest-" version ".tar.xz")) (sha256 (base32 "02gjxskhi10a1sqh3skcild8zria7wncz1a4sbz7ax1p851q76k1")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8328,7 +8358,6 @@ This package is part of the KDE games module.") version "/src/kbounce-" version ".tar.xz")) (sha256 (base32 "02rfv0qzz5cmyfx8f56a45hbm9gsp6m3dcy8ajwx88rw5wpbrr11")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8368,7 +8397,6 @@ This package is part of the KDE games module.") version "/src/kblocks-" version ".tar.xz")) (sha256 (base32 "0qrm0dihzhkxsq9l49ndzms802x6jn92vvabb2zf2q9z593m69cx")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8410,7 +8438,6 @@ This package is part of the KDE games module.") version "/src/ksudoku-" version ".tar.xz")) (sha256 (base32 "0rcscz91hilm7l3am5w02n0n8l7xhi4l0n4sskznh68kblw0ggw2")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8472,7 +8499,6 @@ This package is part of the KDE games module.") "/src/klines-" version ".tar.xz")) (sha256 (base32 "1g1f46jp0rb8gpqkgcf915ydpsscn1sxk3gjvm8bcqgx9ddq59xa")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8517,7 +8543,6 @@ This package is part of the KDE games module.") version ".tar.xz")) (sha256 (base32 "16rcvq796r3asz4v4ap75xvwnxd3dd2nsq5r9vxvzl6rrf1w9bj4")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8559,7 +8584,6 @@ This package is part of the KDE games module.") "/src/kdiamond-" version ".tar.xz")) (sha256 (base32 "1v5yb9hb26lk277zhw8d37ks829yfqr5anzx1qhms44gca5kqhva")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8599,7 +8623,6 @@ This package is part of the KDE games module.") "/src/kfourinline-" version ".tar.xz")) (sha256 (base32 "1vprs6dc1ccn3g6k594i9s94xy4b91vzlqjysyc6fqcq2fs54ny3")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8640,7 +8663,6 @@ This package is part of the KDE games module.") "/src/kblackbox-" version ".tar.xz")) (sha256 (base32 "1x42sfpf75c6mavwkc7g7dm11y9s5dpj8igphly5kvm0pajqby0n")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8682,7 +8704,6 @@ This package is part of the KDE games module.") "/src/knetwalk-" version ".tar.xz")) (sha256 (base32 "1i340salzgqdw8y33wrrydmpgx3pvwf5wrbljlh67cjf6s4csx7d")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8725,7 +8746,6 @@ This package is part of the KDE games module.") "/src/bomber-" version ".tar.xz")) (sha256 (base32 "1lvzd0mzgq25akvwvkm57l3plm65k731v2i1ahakn985bb5gc3is")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8768,7 +8788,6 @@ This package is part of the KDE games module.") "/src/granatier-" version ".tar.xz")) (sha256 (base32 "141qmdinz7ikbbrs8dq6cap3nl22sl7pw62r80pf3xxwn2q4phpa")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8807,7 +8826,6 @@ This package is part of the KDE games module.") "/src/ksirk-" version ".tar.xz")) (sha256 (base32 "1b1wixs2hp5qnvdygfwa3kvy0kn94ysa4ifmx90q6r3yfr2lpfca")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8864,7 +8882,6 @@ This package is part of the KDE games module.") "/src/palapeli-" version ".tar.xz")) (sha256 (base32 "1g91ydbc0x2y2gn3lcb5w03mn7k78l5bq4cb1s59kx6yjbflv3pw")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8913,7 +8930,6 @@ This package is part of the KDE games module.") "/src/kiriki-" version ".tar.xz")) (sha256 (base32 "1xg25dj95g81dc5l7k47am4j52abrwwfx4h73lvsbn4lc8lfmshw")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -8953,7 +8969,6 @@ This package is part of the KDE games module.") "/src/kigo-" version ".tar.xz")) (sha256 (base32 "00l5gcbi8xyj9c1lngkrddka3a4m4cd78prfplrpq32ma9xq681f")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9001,7 +9016,6 @@ This package is part of the KDE games module.") "/src/kubrick-" version ".tar.xz")) (sha256 (base32 "0ma8wja4rqlsmsr8cyicfpkwlgqva4450ls4c0ql53p0kabf04gx")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9044,7 +9058,6 @@ This package is part of the KDE games module.") "/src/lskat-" version ".tar.xz")) (sha256 (base32 "1qk5hd27zb42pbcxq5wyzz62nj5f0qdmgy54r9rnk92pzzzk94s9")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9084,7 +9097,6 @@ This package is part of the KDE games module.") "/src/kapman-" version ".tar.xz")) (sha256 (base32 "03pq38caam30q4bw14c045kayw2d87xq1yaa3s2jkrylylfq3p0f")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9125,7 +9137,6 @@ This package is part of the KDE games module.") "/src/kspaceduel-" version ".tar.xz")) (sha256 (base32 "1hppni0ihs7psc0dly5rxyy2a38nzhlig9yfyhi3lkh36z05pql8")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9162,7 +9173,6 @@ This package is part of the KDE games module.") "/src/bovo-" version ".tar.xz")) (sha256 (base32 "0dbpng0w52nahmx7brsll66zw23ql1g6pcvn2k4g2lnvxch0i59g")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9200,7 +9210,6 @@ This package is part of the KDE games module.") "/src/killbots-" version ".tar.xz")) (sha256 (base32 "1qi86q7diw7glkp9v33yim9nhz2da4balbxa1hjrdgjdv8zdbxbm")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9243,7 +9252,6 @@ This package is part of the KDE games module.") "/src/ksnakeduel-" version ".tar.xz")) (sha256 (base32 "0mprrnpax8pv7ab36zwhvdfj8id52w8g6x76nnj8qvkdlkjiqdnn")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9283,7 +9291,6 @@ This package is part of the KDE games module.") "/src/kollision-" version ".tar.xz")) (sha256 (base32 "1p7qrn3d0ybpvc9k6k5wzj54dsrp1rqh39844maz0ay2fhvmch12")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9322,7 +9329,6 @@ This package is part of the KDE games module.") "/src/knavalbattle-" version ".tar.xz")) (sha256 (base32 "0sdfjplqkb30x2mvh66pkzay6vn5px87779sh2s8lpl6fcw0v9g4")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9364,7 +9370,6 @@ This package is part of the KDE games module.") "/src/kreversi-" version ".tar.xz")) (sha256 (base32 "0b6q8df2bawgnrswhq59z37axad0q3zpvvzxdds7sz1lw505xw9h")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9408,7 +9413,6 @@ This package is part of the KDE games module.") "/src/ksquares-" version ".tar.xz")) (sha256 (base32 "0hv8hls5s627lys08nnw72rfzsafj3dmp49mh2afzmh6lgk9h5vy")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) @@ -9446,7 +9450,6 @@ This package is part of the KDE games module.") "/src/kjumpingcube-" version ".tar.xz")) (sha256 (base32 "0d67zqkf2xffjkj671gl2n6nj6jajyn6rgqqj5i6gm500mqi9rm1")))) - (properties `((tags . ("Desktop" "KDE" "Games")))) (build-system qt-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) diff --git a/gnu/packages/gcc.scm b/gnu/packages/gcc.scm index 4c036933e1..40cc9ed631 100644 --- a/gnu/packages/gcc.scm +++ b/gnu/packages/gcc.scm @@ -649,32 +649,39 @@ as the 'native-search-paths' field." (files '("lib" "lib64"))))) (define-public gfortran-4.8 - (custom-gcc gcc-4.8 "gfortran" '("fortran") - %generic-search-paths)) + (hidden-package + (custom-gcc gcc-4.8 "gfortran" '("fortran") + %generic-search-paths))) (define-public gfortran-4.9 - (custom-gcc gcc-4.9 "gfortran" '("fortran") - %generic-search-paths)) + (hidden-package + (custom-gcc gcc-4.9 "gfortran" '("fortran") + %generic-search-paths))) (define-public gfortran-5 - (custom-gcc gcc-5 "gfortran" '("fortran") - %generic-search-paths)) + (hidden-package + (custom-gcc gcc-5 "gfortran" '("fortran") + %generic-search-paths))) (define-public gfortran-6 - (custom-gcc gcc-6 "gfortran" '("fortran") - %generic-search-paths)) + (hidden-package + (custom-gcc gcc-6 "gfortran" '("fortran") + %generic-search-paths))) (define-public gfortran-7 - (custom-gcc gcc-7 "gfortran" '("fortran") - %generic-search-paths)) + (hidden-package + (custom-gcc gcc-7 "gfortran" '("fortran") + %generic-search-paths))) (define-public gfortran-8 - (custom-gcc gcc-8 "gfortran" '("fortran") - %generic-search-paths)) + (hidden-package + (custom-gcc gcc-8 "gfortran" '("fortran") + %generic-search-paths))) (define-public gfortran-9 - (custom-gcc gcc-9 "gfortran" '("fortran") - %generic-search-paths)) + (hidden-package + (custom-gcc gcc-9 "gfortran" '("fortran") + %generic-search-paths))) (define-public gfortran ;; Note: Update this when GCC changes! We cannot use diff --git a/gnu/packages/geo.scm b/gnu/packages/geo.scm index 41801ed0e6..8e8e6dbe3b 100644 --- a/gnu/packages/geo.scm +++ b/gnu/packages/geo.scm @@ -4,7 +4,7 @@ ;;; Copyright © 2017, 2018 Björn Höfling <bjoern.hoefling@bjoernhoefling.de> ;;; Copyright © 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2018 Ricardo Wurmus <rekado@elephly.net> -;;; Copyright © 2018 Arun Isaac <arunisaac@systemreboot.net> +;;; Copyright © 2018, 2019 Arun Isaac <arunisaac@systemreboot.net> ;;; Copyright © 2018 Joshua Sierles, Nextjournal <joshua@nextjournal.com> ;;; Copyright © 2018, 2019 Julien Lepiller <julien@lepiller.eu> ;;; Copyright © 2019 Guillaume Le Vaillant <glv@posteo.net> @@ -43,6 +43,7 @@ #:use-module ((guix licenses) #:prefix license:) #:use-module (guix packages) #:use-module (guix utils) + #:use-module (gnu packages) #:use-module (gnu packages astronomy) #:use-module (gnu packages autotools) #:use-module (gnu packages boost) @@ -60,6 +61,7 @@ #:use-module (gnu packages icu4c) #:use-module (gnu packages java) #:use-module (gnu packages lua) + #:use-module (gnu packages maths) #:use-module (gnu packages pcre) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) @@ -77,7 +79,7 @@ (define-public geos (package (name "geos") - (version "3.7.1") + (version "3.8.0") (source (origin (method url-fetch) (uri (string-append "http://download.osgeo.org/geos/geos-" @@ -85,7 +87,7 @@ ".tar.bz2")) (sha256 (base32 - "1312m02xk4sp6f1xdpb9w0ic0zbxg90p5y66qnwidl5fksscf1h0")))) + "1mb2v9fy1gnbjhcgv0xny11ggfb17vkzsajdyibigwsxr4ylq4cr")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases @@ -227,32 +229,30 @@ and driving.") (define-public libgeotiff (package (name "libgeotiff") - (version "1.4.3") + (version "1.5.1") (source (origin (method url-fetch) (uri (string-append "http://download.osgeo.org/geotiff/libgeotiff/libgeotiff-" version ".tar.gz")) + (patches (search-patches + ;; See libgeotiff 1.5.1 issue + ;; https://github.com/OSGeo/libgeotiff/issues/22 + "libgeotiff-adapt-test-script-for-proj-6.2.patch")) (sha256 - (base32 "0rbjqixi4c8yz19larlzq6jda0px2gpmpp9c52cyhplbjsdhsldq")) + (base32 "0b31mlzcv5b1y7jdvb7p0pa3xradrg3x5g32ym911lbhq4rrgsgr")) (modules '((guix build utils))) (snippet '(begin ;; Remove .csv files, distributed from EPSG under a restricted ;; license. See LICENSE for full license text. (for-each delete-file (find-files "." "\\.csv$")) - ;; Now that we have removed the csv files, we need to modify the Makefile. - (substitute* "Makefile.in" - (("^all-am: .*$") - "all-am: Makefile $(LTLIBRARIES) $(HEADERS) geo_config.h\n") - (("^install-data-am: .*$") - "install-data-am: install-includeHEADERS")) #t)))) (build-system gnu-build-system) (inputs `(("libjpeg-turbo" ,libjpeg-turbo) ("libtiff" ,libtiff) - ("proj.4" ,proj.4) + ("proj" ,proj) ("zlib" ,zlib))) (arguments `(#:configure-flags @@ -321,6 +321,39 @@ fully fledged Spatial SQL capabilities.") license:mpl1.1 license:public-domain)))) +(define-public proj + (package + (name "proj") + (version "6.2.0") + (source + (origin + (method url-fetch) + (uri (string-append "http://download.osgeo.org/proj/proj-" + version ".tar.gz")) + (sha256 + (base32 + "0l1as8f4zfg74fms6h5p5psziw0lpznja1xnirzsscpnfbwc005k")))) + (build-system gnu-build-system) + (inputs + `(("sqlite" ,sqlite))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "https://proj.org/") + (synopsis "Coordinate transformation software") + (description + "Proj is a generic coordinate transformation software that transforms +geospatial coordinates from one coordinate reference system (CRS) to another. +This includes cartographic projections as well as geodetic transformations. +PROJ includes command line applications for easy conversion of coordinates +from text files or directly from user input. In addition, proj also exposes +an application programming interface that lets developers use the +functionality of proj in their own software.") + (license (list license:expat + ;; src/projections/patterson.cpp + license:asl2.0 + ;; src/geodesic.*, src/tests/geodtest.cpp + license:x11)))) + (define-public proj.4 (package (name "proj.4") @@ -534,7 +567,7 @@ development.") (define-public gdal (package (name "gdal") - (version "2.2.4") + (version "3.0.2") (source (origin (method url-fetch) (uri (string-append @@ -542,7 +575,7 @@ development.") version ".tar.gz")) (sha256 (base32 - "1951f7b69x3d1vic0rmq92q8f4bj3hbxnxmj5jl0cc3zg0isgmdr")) + "0f80izh9wshrsw55kg9abpip74hk6frk3hgqrkqbyn3f6i8g2z3q")) (modules '((guix build utils))) (snippet `(begin @@ -576,6 +609,8 @@ development.") (with "--with-libtiff" "libtiff") (with "--with-geotiff" "libgeotiff") (with "--with-libz" "zlib") + (with "--with-expat" "expat") + (with "--with-sqlite3" "sqlite") "--with-pcre")) #:phases (modify-phases %standard-phases @@ -584,7 +619,8 @@ development.") (substitute* "frmts/mrf/mrf_band.cpp" (("\"../zlib/zlib.h\"") "<zlib.h>"))))))) (inputs - `(("freexl" ,freexl) + `(("expat" ,expat) + ("freexl" ,freexl) ("geos" ,geos) ("giflib" ,giflib) ("json-c" ,json-c) @@ -593,9 +629,12 @@ development.") ("libpng" ,libpng) ("libtiff" ,libtiff) ("libwebp" ,libwebp) + ("netcdf" ,netcdf) ("pcre" ,pcre) + ("proj" ,proj) + ("sqlite" ,sqlite) ("zlib" ,zlib))) - (home-page "http://www.gdal.org/") + (home-page "https://gdal.org/") (synopsis "Raster and vector geospatial data format library") (description "GDAL is a translator library for raster and vector geospatial data formats. As a library, it presents a single raster abstract data model @@ -645,14 +684,14 @@ utilities for data translation and processing.") (define-public postgis (package (name "postgis") - (version "2.4.8") + (version "3.0.0") (source (origin (method url-fetch) (uri (string-append "https://download.osgeo.org/postgis/source/postgis-" version ".tar.gz")) (sha256 (base32 - "0nanza15xzfhbpbq49p1xqz96dgbsam5332y9zj6snmz2mq685ll")))) + "15557fbk0xkngihwhqsbdyz2ng49blisf5zydw81j0gabk6x4vy0")))) (build-system gnu-build-system) (arguments `(#:tests? #f @@ -671,10 +710,12 @@ utilities for data translation and processing.") (inputs `(("gdal" ,gdal) ("geos" ,geos) + ("json-c" ,json-c) + ("libjpeg" ,libjpeg-turbo) ("libxml2" ,libxml2) ("pcre" ,pcre) ("postgresql" ,postgresql) - ("proj.4" ,proj.4))) + ("proj" ,proj))) (native-inputs `(("perl" ,perl) ("pkg-config" ,pkg-config))) @@ -1012,16 +1053,17 @@ volunteers.") (define-public libspatialindex (package (name "libspatialindex") - (version "1.8.5") + (version "1.9.3") (source (origin (method url-fetch) - (uri (string-append "https://download.osgeo.org/libspatialindex/" - "spatialindex-src-" version ".tar.gz")) + (uri (string-append "https://github.com/libspatialindex/libspatialindex/" + "releases/download/" version "/spatialindex-src-" + version ".tar.bz2")) (sha256 (base32 - "1vxzm7kczwnb6qdmc0hb00z8ykx11zk3sb68gc7rch4vrfi4dakw")))) - (build-system gnu-build-system) + "02n5vjcyk04w0djidyp21hfbxfpbbara8ifd9nml6158rwqr8lja")))) + (build-system cmake-build-system) (home-page "https://libspatialindex.org") (synopsis "Spatial indexing library") (description "The purpose of this library is to provide: @@ -1081,7 +1123,7 @@ an independent project by the JOSM team.") (define-public josm (package (name "josm") - (version "15492") + (version "15553") (source (origin (method svn-fetch) (uri (svn-reference @@ -1090,7 +1132,7 @@ an independent project by the JOSM team.") (recursive? #f))) (sha256 (base32 - "12xkwcv77as30a61w1c8a0i2b0kiiks71d487gbdfv7azlj4vqia")) + "091pbcn4fnmk42fmxplhis3nw5dbljf6ws8acyhx5dflyn49xzmx")) (file-name (string-append name "-" version "-checkout")) (modules '((guix build utils))) (snippet diff --git a/gnu/packages/gnome-xyz.scm b/gnu/packages/gnome-xyz.scm index d05bdf0ac0..0fc721b7d3 100644 --- a/gnu/packages/gnome-xyz.scm +++ b/gnu/packages/gnome-xyz.scm @@ -139,11 +139,11 @@ the Obsidian icon theme.") (delete 'bootstrap) (delete 'configure)))) (native-inputs - `(("intltool" ,intltool) + `(("glib:bin" ,glib "bin") + ("intltool" ,intltool) ("pkg-config" ,pkg-config))) (propagated-inputs - `(("glib" ,glib) - ("glib" ,glib "bin"))) + `(("glib" ,glib))) (synopsis "Transforms GNOME's dash into a dock") (description "This extension moves the dash out of the overview, transforming it into a dock for easier application launching and @@ -151,6 +151,94 @@ faster window switching.") (home-page "https://micheleg.github.io/dash-to-dock/") (license license:gpl2+))) +(define-public gnome-shell-extension-hide-app-icon + (let ((commit "4188aa5f4ba24901a053a0c3eb0d83baa8625eab") + (revision "0")) + (package + (name "gnome-shell-extension-hide-app-icon") + (version (git-version "2.7" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url (string-append "https://github.com/michael-rapp" + "/gnome-shell-extension-hide-app-icon.git")) + (commit commit))) + (sha256 + (base32 + "1i28n4bz6wrhn07vpxkr6l1ljyn7g8frp5xrr11z3z32h2hxxcd6")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (arguments + '(#:tests? #f ; no test target + #:make-flags (list (string-append "EXTENSIONS_DIR=" + (assoc-ref %outputs "out") + "/share/gnome-shell/extensions")) + #:phases + (modify-phases %standard-phases + (delete 'configure) ; no configure script + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out")) + (pre "/share/gnome-shell/extensions/") + (dir "hide-app-icon@mrapp.sourceforge.com")) + (copy-recursively dir (string-append out pre dir)) + #t)))))) + (native-inputs + `(("glib" ,glib "bin") + ("intltool" ,intltool))) + (propagated-inputs + `(("glib" ,glib))) + (synopsis "Hide app icon from GNOME's panel") + (description "This extension allows to hide the icon and/or title of the +currently focused application in the top panel of the GNOME shell.") + (home-page + "https://github.com/michael-rapp/gnome-shell-extension-hide-app-icon/") + (license + ;; README.md and LICENSE.txt disagree -- the former claims v3, the + ;; latter v2. No mention of "or later" in either place or in the code. + (list license:gpl2 + license:gpl3))))) + +(define-public gnome-shell-extension-dash-to-panel + (package + (name "gnome-shell-extension-dash-to-panel") + (version "26") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/home-sweet-gnome/dash-to-panel.git") + (commit (string-append "v" version)))) + (sha256 + (base32 + "1phfx2pblygpcvsppsqqqflm7qnz46mqkw29hj0nv2dn69hf4xbc")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (arguments + `(#:tests? #f + #:make-flags (list (string-append "INSTALLBASE=" + (assoc-ref %outputs "out") + "/share/gnome-shell/extensions") + (string-append "VERSION=" + ,(package-version + gnome-shell-extension-dash-to-panel))) + #:phases + (modify-phases %standard-phases + (delete 'bootstrap) + (delete 'configure)))) + (native-inputs + `(("intltool" ,intltool) + ("pkg-config" ,pkg-config))) + (propagated-inputs + `(("glib" ,glib) + ("glib" ,glib "bin"))) + (synopsis "Icon taskbar for GNOME Shell") + (description "This extension moves the dash into the gnome main +panel so that the application launchers and system tray are combined +into a single panel, similar to that found in KDE Plasma and Windows 7+.") + (home-page "https://github.com/home-sweet-gnome/dash-to-panel/") + (license license:gpl2+))) + (define-public gnome-shell-extension-noannoyance (package (name "gnome-shell-extension-noannoyance") @@ -213,3 +301,37 @@ It uses ES6 syntax and claims to be more actively maintained than others.") dark elements. It supports GNOME, Unity, Xfce, and Openbox.") (home-page "https://numixproject.github.io") (license license:gpl3+))) + +(define-public papirus-icon-theme + (let ((version "0.0.0") ;; The package does not use semver + (revision "0") + (tag "20191201")) + (package + (name "papirus-icon-theme") + (version (git-version version revision tag)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/PapirusDevelopmentTeam/papirus-icon-theme.git") + (commit tag))) + (sha256 + (base32 + "0lnz1kmz28xh1f4slbsx7ycji5hgszyiyprbf5w5fbjhvi5gzw1h")) + (file-name (git-file-name name version)))) + (build-system gnu-build-system) + (arguments + '(#:tests? #f + #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out"))) + #:phases + (modify-phases %standard-phases + (delete 'bootstrap) + (delete 'configure) + (delete 'build)))) + (native-inputs + `(("gtk+:bin" ,gtk+ "bin"))) + (home-page "https://git.io/papirus-icon-theme") + (synopsis "Fork of Paper icon theme with a lot of new icons and a few extras") + (description "Papirus is a fork of the icon theme Paper with a lot of new icons +and a few extra features.") + (license license:gpl3)))) diff --git a/gnu/packages/gnome.scm b/gnu/packages/gnome.scm index 2997647d23..dd9ac29f4e 100644 --- a/gnu/packages/gnome.scm +++ b/gnu/packages/gnome.scm @@ -43,6 +43,8 @@ ;;; Copyright © 2019 Martin Becze <mjbecze@riseup.net> ;;; Copyright © 2019 David Wilson <david@daviwil.com> ;;; Copyright © 2019 Raghav Gururajan <raghavgururajan@disroot.org> +;;; Copyright © 2019 Jonathan Brielmaier <jonathan.brielmaier@web.de> +;;; Copyright © 2019 Leo Prikler <leo.prikler@student.tugraz.at> ;;; ;;; This file is part of GNU Guix. ;;; @@ -99,6 +101,7 @@ #:use-module (gnu packages glib) #:use-module (gnu packages gnupg) #:use-module (gnu packages gnuzilla) + #:use-module (gnu packages geo) #:use-module (gnu packages gperf) #:use-module (gnu packages graphviz) #:use-module (gnu packages gstreamer) @@ -193,9 +196,9 @@ (version "3.12.2") (source (origin (method url-fetch) - (uri (string-append "mirror://gnome/sources/" name "/" + (uri (string-append "mirror://gnome/sources/brasero/" (version-major+minor version) "/" - name "-" version ".tar.xz")) + "brasero-" version ".tar.xz")) (sha256 (base32 "0h90y674j26rvjahb8cc0w79zx477rb6zaqcj26wzvq8kmpic8k8")))) @@ -219,6 +222,7 @@ `(("hicolor-icon-theme" ,hicolor-icon-theme))) (native-inputs `(("intltool" ,intltool) + ("itstool" ,itstool) ("glib" ,glib "bin") ; glib-compile-schemas, etc. ("gobject-introspection" ,gobject-introspection) ("pkg-config" ,pkg-config))) @@ -229,14 +233,13 @@ ("gstreamer" ,gstreamer) ("gst-plugins-base" ,gst-plugins-base) ("gtk+" ,gtk+) - ("itstool" ,itstool) ("libcanberra" ,libcanberra) ("libice" ,libice) ("libnotify" ,libnotify) ("libsm" ,libsm) ("libxml2" ,libxml2) ("totem-pl-parser" ,totem-pl-parser))) - (home-page "https://projects.gnome.org/brasero/") + (home-page "https://wiki.gnome.org/Apps/Brasero") (synopsis "CD/DVD burning tool for Gnome") (description "Brasero is an application to burn CD/DVD for the Gnome Desktop. It is designed to be as simple as possible and has some unique @@ -328,39 +331,40 @@ either on a local, or remote machine via a number of methods.") (let ((commit "fbc306168edab63db80b904956117cbbdc514ee4")) (package (name "dia") - (version (string-append "0.97.2-" (string-take commit 7))) + (version (git-version "0.97.3" "1" commit)) (source (origin (method git-fetch) (uri (git-reference - (url "https://git.gnome.org/browse/dia") + (url "https://gitlab.gnome.org/GNOME/dia.git/") (commit commit))) - (file-name (string-append name "-" version "-checkout")) + (file-name (git-file-name name version)) (sha256 (base32 "1b4bba0k8ph4cwgw8xjglss0p6n111bpd5app67lrq79mp0ad06l")))) (build-system gnu-build-system) (inputs - `(("glib" ,glib "bin") - ("pango" ,pango) + `(("freetype" ,freetype) ("gdk-pixbuf" ,gdk-pixbuf) ("gtk+" ,gtk+-2) + ("libart-lgpl" ,libart-lgpl) ("libxml2" ,libxml2) - ("freetype" ,freetype) - ("libart-lgpl" ,libart-lgpl))) + ("pango" ,pango))) (native-inputs - `(("intltool" ,intltool) - ("pkg-config" ,pkg-config) + `(("autoconf" ,autoconf) ("automake" ,automake) - ("autoconf" ,autoconf) + ("intltool" ,intltool) + ("glib" ,glib "bin") ("libtool" ,libtool) ("perl" ,perl) + ("pkg-config" ,pkg-config) ("python-wrapper" ,python-wrapper))) (arguments `(#:phases (modify-phases %standard-phases - (add-after 'unpack 'run-autogen + (add-before 'bootstrap 'dont-configure-during-bootstrap (lambda _ - (system* "sh" "autogen.sh")))))) + (setenv "NOCONFIGURE" "true") + #t))))) (home-page "https://wiki.gnome.org/Apps/Dia") (synopsis "Diagram creation for GNOME") (description "Dia can be used to draw different types of diagrams, and @@ -453,6 +457,38 @@ documents. This package also contains binaries that can convert XPS documents to other formats.") (license license:lgpl2.1+))) +(define-public gnome-characters + (package + (name "gnome-characters") + (version "3.30.0") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://gnome/sources/" + "gnome-characters/" (version-major+minor version) + "/gnome-characters-" version ".tar.xz")) + (sha256 + (base32 + "08cwz39iwgsyyb2wqhb8vfbmh1cwfkgfiy7adp08w7rwqi99x3dp")))) + (build-system meson-build-system) + (arguments '(#:glib-or-gtk? #t)) + (native-inputs + `(("gettext" ,gettext-minimal) + ("glib:bin" ,glib "bin") + ("gtk+:bin" ,gtk+ "bin") + ("pkg-config" ,pkg-config) + ("python" ,python-minimal))) + (inputs + `(("gjs" ,gjs) + ("gtk+" ,gtk+) + ("libunistring" ,libunistring))) + (home-page "https://wiki.gnome.org/Apps/CharacterMap") + (synopsis "Find and insert unusual characters") + (description "Characters is a simple utility application to find +and insert unusual characters. It allows you to quickly find the +character you are looking for by searching for keywords.") + (license license:bsd-3))) + (define-public gnome-common (package (name "gnome-common") @@ -676,6 +712,42 @@ and keep up to date translations of documentation.") (description "Disk management utility for GNOME.") (license license:gpl2+))) +(define-public gnome-font-viewer + (package + (name "gnome-font-viewer") + (version "3.30.0") + (source (origin + (method url-fetch) + (uri (string-append "mirror://gnome/sources/gnome-font-viewer/" + (version-major+minor version) + "/gnome-font-viewer-" version ".tar.xz")) + (sha256 + (base32 + "1wwnx2zrlbd2d6np7m9s78alx6j6ranrnh1g2z6zrv9qcj8rpzz5")))) + (build-system meson-build-system) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-post-install-script + (lambda _ + (substitute* "meson-postinstall.sh" + (("update-desktop-database") (which "true"))) + #t))))) + (native-inputs + `(("gettext" ,gettext-minimal) + ("glib:bin" ,glib "bin") + ("pkg-config" ,pkg-config))) + (inputs + `(("glib" ,glib) + ("gnome-desktop" ,gnome-desktop) + ("gtk+" ,gtk+))) + (home-page "https://gitlab.gnome.org/GNOME/gnome-font-viewer") + (synopsis "GNOME Fonts") + (description "Application to show you the fonts installed on your computer +for your use as thumbnails. Selecting any thumbnails shows the full view of how +the font would look under various sizes.") + (license license:gpl2+))) + (define-public gcr (package (name "gcr") @@ -1779,10 +1851,9 @@ library.") (version "0.8.14") (source (origin (method url-fetch) - (uri (let ((upstream-name "libIDL")) - (string-append "mirror://gnome/sources/" upstream-name "/" - (version-major+minor version) "/" - upstream-name "-" version ".tar.bz2"))) + (uri (string-append "mirror://gnome/sources/libIDL/" + (version-major+minor version) "/" + "libIDL-" version ".tar.bz2")) (sha256 (base32 "08129my8s9fbrk0vqvnmx6ph4nid744g5vbwphzkaik51664vln5")))) @@ -1799,6 +1870,7 @@ Definition Language (idl) files, which is a specification for defining portable interfaces. libidl was initially written for orbit (the orb from the GNOME project, and the primary means of libidl distribution). However, the functionality was designed to be as reusable and portable as possible.") + (properties `((upstream-name . "libIDL"))) (license license:lgpl2.0+))) @@ -5081,32 +5153,38 @@ metadata in photo and video files of various formats.") "1m9i8r4gyd2hzlxjjwfyck4kz7gdg2vz2k6l6d0ga9hdfq2l4p9l")))) (build-system meson-build-system) (arguments - '(#:glib-or-gtk? #t)) + '(#:glib-or-gtk? #t + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'skip-gtk-update-icon-cache + (lambda _ + (substitute* "build-aux/meson/postinstall.py" + (("gtk-update-icon-cache") (which "true")) + (("update-desktop-database") (which "true"))) + #t))))) (propagated-inputs `(("dconf" ,dconf))) (native-inputs - `(("desktop-file-utils" ,desktop-file-utils) ; for update-desktop-database - ("gettext" ,gettext-minimal) - ("gtk+" ,gtk+ "bin") ; gtk-update-icon-cache + `(("gettext" ,gettext-minimal) + ("glib:bin" ,glib "bin") ("itstool" ,itstool) ("pkg-config" ,pkg-config) ("vala" ,vala))) (inputs - `(("glib:bin" ,glib "bin") - ("gstreamer" ,gstreamer) + `(("gcr" ,gcr) + ("gexiv2" ,gexiv2) ("gst-plugins-base" ,gst-plugins-base) + ("gstreamer" ,gstreamer) + ("json-glib" ,json-glib) ("libgdata" ,libgdata) ("libgee" ,libgee) - ("gexiv2" ,gexiv2) + ("libgphoto2" ,libgphoto2) + ("libgudev" ,libgudev) ("libraw" ,libraw) - ("json-glib" ,json-glib) - ("webkitgtk" ,webkitgtk) - ("sqlite" ,sqlite) ("libsoup" ,libsoup) ("libxml2" ,libxml2) - ("libgudev" ,libgudev) - ("libgphoto2" ,libgphoto2) - ("gcr" ,gcr))) + ("sqlite" ,sqlite) + ("webkitgtk" ,webkitgtk))) (home-page "https://wiki.gnome.org/Apps/Shotwell") (synopsis "Photo manager for GNOME 3") (description @@ -7111,52 +7189,54 @@ associations for GNOME.") (build-system trivial-build-system) (arguments '(#:builder (begin (mkdir %output) #t))) (propagated-inputs - ;; TODO: Add more packages according to: - ;; <https://packages.debian.org/jessie/gnome-core>. - `(("adwaita-icon-theme" ,adwaita-icon-theme) - ("baobab" ,baobab) - ("font-cantarell" ,font-cantarell) - ("font-dejavu" ,font-dejavu) - ("at-spi2-core" ,at-spi2-core) - ("dbus" ,dbus) - ("dconf" ,dconf) - ("desktop-file-utils" ,desktop-file-utils) - ("eog" ,eog) - ("epiphany" ,epiphany) - ("evince" ,evince) - ("file-roller" ,file-roller) - ("gedit" ,gedit) - ("glib-networking" ,glib-networking) - ("gnome-backgrounds" ,gnome-backgrounds) - ("gnome-bluetooth" ,gnome-bluetooth) - ("gnome-calculator" ,gnome-calculator) - ("gnome-contacts" ,gnome-contacts) - ("gnome-control-center" ,gnome-control-center) - ("gnome-disk-utility" ,gnome-disk-utility) - ("gnome-default-applications" ,gnome-default-applications) - ("gnome-keyring" ,gnome-keyring) - ("gnome-online-accounts" ,gnome-online-accounts) - ("gnome-screenshot" ,gnome-screenshot) - ("gnome-session" ,gnome-session) - ("gnome-settings-daemon" ,gnome-settings-daemon) - ("gnome-shell" ,gnome-shell) - ("gnome-system-monitor" ,gnome-system-monitor) - ("gnome-terminal" ,gnome-terminal) - ("gnome-themes-standard" ,gnome-themes-standard) - ("gst-plugins-base" ,gst-plugins-base) - ("gst-plugins-good" ,gst-plugins-good) - ("gucharmap" ,gucharmap) - ("gvfs" ,gvfs) - ("hicolor-icon-theme" ,hicolor-icon-theme) - ("nautilus" ,nautilus) - ("pinentry-gnome3" ,pinentry-gnome3) - ("pulseaudio" ,pulseaudio) - ("shared-mime-info" ,shared-mime-info) - ("system-config-printer" ,system-config-printer) - ("totem" ,totem) - ("xdg-user-dirs" ,xdg-user-dirs) - ("yelp" ,yelp) - ("zenity" ,zenity))) + ;; TODO: Add or remove packages according to: + ;; <https://calc.disroot.org/2nu6mpf88ynq.html>. + ;; GNOME-Core-OS-Services + `(("accountsservice" ,accountsservice) + ("network-manager" ,network-manager) + ("packagekit" ,packagekit) + ("upower" ,upower) + ;; GNOME-Core-Shell + ("adwaita-icon-theme" ,adwaita-icon-theme) + ("gdm" ,gdm) + ("glib-networking" ,glib-networking) + ("gnome-backgrounds" ,gnome-backgrounds) + ("gnome-bluetooth" ,gnome-bluetooth) + ("gnome-control-center" ,gnome-control-center) + ("gnome-desktop" ,gnome-desktop) + ("gnome-keyring" ,gnome-keyring) + ("gnome-session" ,gnome-session) + ("gnome-settings-daemon" ,gnome-settings-daemon) + ("gnome-shell-extensions" ,gnome-shell-extensions) + ("gnome-shell" ,gnome-shell) + ("gnome-themes-extra" ,gnome-themes-extra) + ("gsettings-desktop-schemas" ,gsettings-desktop-schemas) + ("gvfs" ,gvfs) + ("mutter" ,mutter) + ("orca" ,orca) + ;; GNOME-Core-Utilities + ("baobab" ,baobab) + ("cheese" ,cheese) + ("eog" ,eog) + ("epiphany" ,epiphany) + ("evince" ,evince) + ("file-roller" ,file-roller) + ("gedit" ,gedit) + ("gnome-calculator" ,gnome-calculator) + ("gnome-calendar" ,gnome-calendar) + ("gnome-characters" ,gnome-characters) + ("gnome-clocks" ,gnome-clocks) + ("gnome-contacts" ,gnome-contacts) + ("gnome-disk-utility" ,gnome-disk-utility) + ("gnome-font-viewer" ,gnome-font-viewer) + ("gnome-maps" ,gnome-maps) + ("gnome-screenshot" ,gnome-screenshot) + ("gnome-system-monitor" ,gnome-system-monitor) + ("gnome-terminal" ,gnome-terminal) + ("nautilus" ,nautilus) + ("simple-scan" ,simple-scan) + ("totem" ,totem) + ("yelp" ,yelp))) (synopsis "The GNU desktop environment") (home-page "https://www.gnome.org/") (description @@ -7518,11 +7598,11 @@ GNOME Shell appearance and extension, etc.") (arguments '(#:configure-flags '("-Dextension_set=all"))) (native-inputs - `(("intltool" ,intltool) + `(("glib:bin" ,glib "bin") + ("intltool" ,intltool) ("pkg-config" ,pkg-config))) (propagated-inputs - `(("glib" ,glib) - ("glib" ,glib "bin"))) + `(("glib" ,glib))) (synopsis "Extensions for GNOME Shell") (description "GNOME Shell extensions modify and extend GNOME Shell functionality and behavior.") @@ -8148,6 +8228,7 @@ that support the Assistive Technology Service Provider Interface (AT-SPI).") ("iso-codes" ,iso-codes))) (native-inputs `(("glib" ,glib "bin") + ("gobject-introspection" ,gobject-introspection) ("pkg-config" ,pkg-config) ("xmllint" ,libxml2) @@ -8769,7 +8850,7 @@ advanced image management tool") (define-public libhandy (package (name "libhandy") - (version "0.0.11") + (version "0.0.12") (source (origin (method git-fetch) @@ -8778,7 +8859,7 @@ advanced image management tool") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0622zp5wrvn5bvgardijxd11y76g1i54fs32y03dw9nrar7i6vb0")))) + (base32 "09wlknarzsbk9hr5ws6s7x5kibkhx9ayrbhshfqib4zkhq2f76hw")))) (build-system meson-build-system) (arguments `(#:configure-flags @@ -8808,7 +8889,8 @@ advanced image management tool") (home-page "https://source.puri.sm/Librem5/libhandy") (synopsis "Library full of GTK+ widgets for mobile phones") (description "The aim of the handy library is to help with developing user -intefaces for mobile devices using GTK+.") +interfaces for mobile devices using GTK+. It provides responsive GTK+ widgets +for usage on small and big screens.") (license license:lgpl2.1+))) (define-public libgit2-glib @@ -8910,6 +8992,43 @@ repository and commit your work.") (home-page "https://wiki.gnome.org/Apps/Gitg") (license license:gpl2+))) +(define-public gamin + (package + (name "gamin") + (version "0.1.10") + (source (origin + (method url-fetch) + (uri (string-append "mirror://gnome/sources/" name "/" + (version-major+minor version) "/" + name "-" version ".tar.bz2")) + (sha256 + (base32 + "02n1zr9y8q9lyczhcz0nxar1vmf8p2mmbw8kq0v43wg21jr4i6d5")))) + (build-system gnu-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'remove-deprecated-macro + (lambda _ + (substitute* '("server/gam_node.c" + "server/gam_subscription.h" + "server/gam_node.h" + "server/gam_subscription.c") + (("G_CONST_RETURN") "const")) + #t))))) + (inputs + `(("glib" ,glib))) + (native-inputs + `(("intltool" ,intltool) + ("pkg-config" ,pkg-config))) + (home-page "https://people.gnome.org/~veillard/gamin/") + (synopsis "File alteration monitor") + (description + "Gamin is a file and directory monitoring system defined to be a subset +of the FAM (File Alteration Monitor) system. This is a service provided by a +library which allows to detect when a file or a directory has been modified.") + (license license:gpl2+))) + (define-public gnome-mahjongg (package (name "gnome-mahjongg") @@ -8946,3 +9065,96 @@ tile-matching game Mahjong. It features multiple board layouts, tile themes, and a high score table.") (home-page "https://wiki.gnome.org/Apps/Mahjongg") (license license:gpl2+))) + +(define-public gnome-themes-extra + (package + (name "gnome-themes-extra") + (version "3.28") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://gnome/sources/" name "/" + (version-major+minor version) "/" name "-" + version ".tar.xz")) + (sha256 + (base32 + "06aqg9asq2vqi9wr29bs4v8z2bf4manhbhfghf4nvw01y2zs0jvw")))) + (build-system gnu-build-system) + (arguments + '(#:configure-flags + ;; Don't create 'icon-theme.cache'. + (let* ((coreutils (assoc-ref %build-inputs "coreutils")) + (true (string-append coreutils "/bin/true"))) + (list (string-append "GTK_UPDATE_ICON_CACHE=" true))))) + (native-inputs + `(("glib:bin" ,glib "bin") + ("intltool" ,intltool) + ("pkg-config" ,pkg-config))) + (inputs + `(("glib" ,glib) + ("gtk+" ,gtk+) + ("gtk+-2" ,gtk+-2) + ("librsvg" ,librsvg) + ("libxml2" ,libxml2))) + (home-page "https://gitlab.gnome.org/GNOME/gnome-themes-extra") + (synopsis "GNOME Extra Themes") + (description "This package provides themes and related elements that don't +really fit in other upstream packages. It offers legacy support for GTK+ 2 +versions of Adwaita, Adwaita-dark and HighContrast themes. It also provides +index files needed for Adwaita to be used outside of GNOME.") + (license license:lgpl2.1+))) + +(define-public polari + (package + (name "polari") + (version "3.32.2") + (source (origin + (method url-fetch) + (uri (string-append "mirror://gnome/sources/polari/" + (version-major+minor version) + "/polari-" version ".tar.xz")) + (sha256 + (base32 + "0h0w9j3y067l911gpj446b3a2w1i2vzr1w2a7cz7i5rhn6qkf2sp")))) + (build-system meson-build-system) + (arguments + `(#:glib-or-gtk? #t + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'skip-gtk-update-icon-cache + (lambda _ + (substitute* "meson/meson-postinstall.sh" + (("gtk-update-icon-cache") (which "true"))) + #t)) + (add-after 'glib-or-gtk-wrap 'wrap-typelib + (lambda* (#:key outputs #:allow-other-keys) + (let ((prog (string-append (assoc-ref outputs "out") + "/bin/polari"))) + (wrap-program prog + `("GI_TYPELIB_PATH" = (,(getenv "GI_TYPELIB_PATH")))) + #t)))))) + (inputs + `(("glib" ,glib) + ("gsettings-desktop-schemas" ,gsettings-desktop-schemas) + ("gspell" ,gspell) + ("gtk+" ,gtk+) + ("gjs" ,gjs) + ("libsecret" ,libsecret) + ("libsoup" ,libsoup) + ("telepathy-glib" ,telepathy-glib) + ("telepathy-logger" ,telepathy-logger))) + (native-inputs + `(("glib:bin" ,glib "bin") + ("gobject-introspection" ,gobject-introspection) + ("intltool" ,intltool) + ("pkg-config" ,pkg-config) + ("yelp-tools" ,yelp-tools))) + (propagated-inputs + `(("telepathy-idle" ,telepathy-idle) + ("telepathy-mission-control" ,telepathy-mission-control))) + (synopsis "Simple IRC Client") + (description + "Polari is a simple Internet Relay Chat (IRC) client that is designed to +integrate seamlessly with the GNOME desktop.") + (home-page "https://wiki.gnome.org/Apps/Polari") + (license license:gpl2+))) diff --git a/gnu/packages/gnunet.scm b/gnu/packages/gnunet.scm index 9d53ca5b80..43605dfc86 100644 --- a/gnu/packages/gnunet.scm +++ b/gnu/packages/gnunet.scm @@ -8,6 +8,7 @@ ;;; Copyright © 2016, 2017, 2018, 2019 ng0 <ng0@n0.is> ;;; Copyright © 2016, 2017, 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2018 Alex Vong <alexvong1995@gmail.com> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -149,14 +150,14 @@ tool to extract metadata from a file and print the results.") (define-public libmicrohttpd (package (name "libmicrohttpd") - (version "0.9.68") + (version "0.9.69") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/libmicrohttpd/libmicrohttpd-" version ".tar.gz")) (sha256 (base32 - "0q8bc4hrxn6llml7w2vam6n833x8injs39wgdkhwkawr50m6wwf5")))) + "0zp34zgcahym5kp2r83gfb5wnr8yf643a26k6zk96x3qica6p6zv")))) (build-system gnu-build-system) (inputs `(("curl" ,curl) @@ -311,7 +312,7 @@ global, distributed network that provides security and privacy. GNUnet in that sense aims to replace the current internet protocol stack. Along with an application for secure publication of files, it has grown to include all kinds of basic applications for the foundation of a GNU internet.") - (license license:gpl3+) + (license license:agpl3+) (home-page "https://gnunet.org/"))) (define-public guile-gnunet ;GSoC 2015! diff --git a/gnu/packages/gnupg.scm b/gnu/packages/gnupg.scm index abce1aa41a..4e8869a658 100644 --- a/gnu/packages/gnupg.scm +++ b/gnu/packages/gnupg.scm @@ -469,7 +469,7 @@ gpgpme starting with version 1.7.") (define-public guile-gcrypt (package (name "guile-gcrypt") - (version "0.2.0") + (version "0.2.1") (home-page "https://notabug.org/cwebber/guile-gcrypt") (source (origin (method git-fetch) @@ -478,7 +478,7 @@ gpgpme starting with version 1.7.") (commit (string-append "v" version)))) (sha256 (base32 - "1mhc5m4xygkfj7x18f8apiqpfdn9mrql0am5sk13cf5xn8x1r63z")) + "0n232iyayc46f7hywmjw0jr7pbmmz5h4b04jskhkzz9gxz0ci99c")) (file-name (string-append name "-" version "-checkout")))) (build-system gnu-build-system) (arguments diff --git a/gnu/packages/gnuzilla.scm b/gnu/packages/gnuzilla.scm index 2f15beecc7..d5d9839e1a 100644 --- a/gnu/packages/gnuzilla.scm +++ b/gnu/packages/gnuzilla.scm @@ -964,6 +964,13 @@ from forcing GEXP-PROMISE." 'avcodec', 'avutil', 'pulse' ]\n\n" all))) #t)) + (add-after 'link-libxul-with-libraries 'fix-ffmpeg-runtime-linker + (lambda* (#:key inputs #:allow-other-keys) + ;; Arrange to load libavcodec.so by its absolute file name. + (substitute* "dom/media/platforms/ffmpeg/FFmpegRuntimeLinker.cpp" + (("libavcodec\\.so") + (string-append (assoc-ref inputs "ffmpeg") "/lib/libavcodec.so"))) + #t)) (replace 'bootstrap (lambda _ (invoke "sh" "-c" "autoconf old-configure.in > old-configure") diff --git a/gnu/packages/graph.scm b/gnu/packages/graph.scm index 52db619fb3..4095926af3 100644 --- a/gnu/packages/graph.scm +++ b/gnu/packages/graph.scm @@ -165,14 +165,14 @@ model.") (define-public r-rgraphviz (package (name "r-rgraphviz") - (version "2.28.0") + (version "2.30.0") (source (origin (method url-fetch) (uri (bioconductor-uri "Rgraphviz" version)) (sha256 (base32 - "0nivz8fshaqig6ynjqbya2gmxsy4hm7jnd8fhb853z5g0ydp7g0c")))) + "00lrkbgbb4payybckcmazsv8skysgdlglyqbl7yjb37vv3gnfc6c")))) (properties `((upstream-name . "Rgraphviz"))) (build-system r-build-system) ;; FIXME: Rgraphviz bundles the sources of an older variant of diff --git a/gnu/packages/guile-xyz.scm b/gnu/packages/guile-xyz.scm index 674b24e594..1faf0a5ecf 100644 --- a/gnu/packages/guile-xyz.scm +++ b/gnu/packages/guile-xyz.scm @@ -73,6 +73,7 @@ #:use-module (gnu packages ncurses) #:use-module (gnu packages networking) #:use-module (gnu packages noweb) + #:use-module (gnu packages nss) #:use-module (gnu packages password-utils) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) @@ -99,104 +100,112 @@ #:use-module ((srfi srfi-1) #:select (alist-delete))) (define-public artanis - (let ((release "0.3.1") - (revision 0)) - (package - (name "artanis") - (version (if (zero? revision) - release - (string-append release "-" - (number->string revision)))) - (source (origin - (method url-fetch) - (uri (string-append "mirror://gnu/artanis/artanis-" - release ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) - (sha256 - (base32 - "0hqr5m3mb558bdhkc2sadmd9cbrhp3y525wx7cwirgy6i0zmay68")) - (modules '((guix build utils))) - (snippet - '(begin - ;; Unbundle guile-redis and guile-json - (delete-file-recursively "artanis/third-party/json.scm") - (delete-file-recursively "artanis/third-party/json") - (delete-file-recursively "artanis/third-party/redis.scm") - (delete-file-recursively "artanis/third-party/redis") - (substitute* '("artanis/artanis.scm" - "artanis/lpc.scm" - "artanis/oht.scm") - (("(#:use-module \\()artanis third-party (json\\))" _ - use-module json) - (string-append use-module json))) - (substitute* '("artanis/lpc.scm" - "artanis/session.scm") - (("(#:use-module \\()artanis third-party (redis\\))" _ - use-module redis) - (string-append use-module redis))) - (substitute* "artanis/oht.scm" - (("([[:punct:][:space:]]+)(->json-string)([[:punct:][:space:]]+)" - _ pre json-string post) - (string-append pre - "scm" json-string - post))) - (substitute* "artanis/artanis.scm" - (("[[:punct:][:space:]]+->json-string[[:punct:][:space:]]+") - "")) - #t)))) - (build-system gnu-build-system) - ;; FIXME the bundled csv contains one more exported procedure - ;; (sxml->csv-string) than guile-csv. The author is maintainer of both - ;; projects. - ;; TODO: Add guile-dbi and guile-dbd optional dependencies. - (inputs `(("guile" ,guile-2.2) - ("guile-json" ,guile-json-1) - ("guile-redis" ,guile-redis))) - (native-inputs `(("bash" ,bash) ;for the `source' builtin - ("pkgconfig" ,pkg-config) - ("util-linux" ,util-linux))) ;for the `script' command - (arguments - '(#:make-flags - ;; TODO: The documentation must be built with the `docs' target. - (let* ((out (assoc-ref %outputs "out")) - (scm (string-append out "/share/guile/site/2.2")) - (go (string-append out "/lib/guile/2.2/site-ccache"))) - ;; Don't use (%site-dir) for site paths. - (list (string-append "MOD_PATH=" scm) - (string-append "MOD_COMPILED_PATH=" go))) - #:test-target "test" - #:phases - (modify-phases %standard-phases - (add-after 'unpack 'patch-site-dir - (lambda* (#:key outputs #:allow-other-keys) - (substitute* "artanis/commands/help.scm" - (("\\(%site-dir\\)") - (string-append "\"" - (assoc-ref outputs "out") - "/share/guile/site/2.2\""))))) - (add-before 'install 'substitute-root-dir - (lambda* (#:key outputs #:allow-other-keys) - (let ((out (assoc-ref outputs "out"))) - (substitute* "Makefile" ;ignore the execution of bash.bashrc - ((" /etc/bash.bashrc") " /dev/null")) - (substitute* "Makefile" ;set the root of config files to OUT - ((" /etc") (string-append " " out "/etc"))) - (mkdir-p (string-append out "/bin")) ;for the `art' executable - #t))) - (add-after 'install 'wrap-art - (lambda* (#:key inputs outputs #:allow-other-keys) - (let* ((out (assoc-ref outputs "out")) - (bin (string-append out "/bin")) - (scm (string-append out "/share/guile/site/2.2")) - (go (string-append out "/lib/guile/2.2/site-ccache"))) - (wrap-program (string-append bin "/art") - `("GUILE_LOAD_PATH" ":" prefix - (,scm ,(getenv "GUILE_LOAD_PATH"))) - `("GUILE_LOAD_COMPILED_PATH" ":" prefix - (,go ,(getenv "GUILE_LOAD_COMPILED_PATH")))) - #t)))))) - (synopsis "Web application framework written in Guile") - (description "GNU Artanis is a web application framework written in Guile + (package + (name "artanis") + (version "0.4.1") + (source (origin + (method url-fetch) + (uri (string-append "mirror://gnu/artanis/artanis-" + version ".tar.gz")) + (sha256 + (base32 + "0nnmdfx5xwcc3kck64var7msz7g3qk817d7bv9l159nkmic0v9w4")) + (modules '((guix build utils))) + (snippet + '(begin + ;; Unbundle guile-redis and guile-json + (delete-file-recursively "artanis/third-party/json.scm") + (delete-file-recursively "artanis/third-party/json") + (delete-file-recursively "artanis/third-party/redis.scm") + (delete-file-recursively "artanis/third-party/redis") + (substitute* '("artanis/artanis.scm" + "artanis/lpc.scm" + "artanis/oht.scm") + (("(#:use-module \\()artanis third-party (json\\))" _ + use-module json) + (string-append use-module json))) + (substitute* '("artanis/lpc.scm" + "artanis/session.scm") + (("(#:use-module \\()artanis third-party (redis\\))" _ + use-module redis) + (string-append use-module redis))) + (substitute* "artanis/oht.scm" + (("([[:punct:][:space:]]+)(->json-string)([[:punct:][:space:]]+)" + _ pre json-string post) + (string-append pre + "scm" json-string + post))) + (substitute* "artanis/artanis.scm" + (("[[:punct:][:space:]]+->json-string[[:punct:][:space:]]+") + "")) + #t)))) + (build-system gnu-build-system) + (inputs + `(("guile" ,guile-2.2) + ("nss" ,nss))) + ;; FIXME the bundled csv contains one more exported procedure + ;; (sxml->csv-string) than guile-csv. The author is maintainer of both + ;; projects. + ;; TODO: Add guile-dbi and guile-dbd optional dependencies. + (propagated-inputs + `(("guile-json" ,guile-json-1) + ("guile-readline" ,guile-readline) + ("guile-redis" ,guile-redis))) + (native-inputs + `(("bash" ,bash) ;for the `source' builtin + ("pkgconfig" ,pkg-config) + ("util-linux" ,util-linux))) ;for the `script' command + (arguments + '(#:make-flags + ;; TODO: The documentation must be built with the `docs' target. + (let* ((out (assoc-ref %outputs "out")) + (scm (string-append out "/share/guile/site/2.2")) + (go (string-append out "/lib/guile/2.2/site-ccache"))) + ;; Don't use (%site-dir) for site paths. + (list (string-append "MOD_PATH=" scm) + (string-append "MOD_COMPILED_PATH=" go))) + #:test-target "test" + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'patch-site-dir + (lambda* (#:key outputs #:allow-other-keys) + (substitute* "artanis/commands/help.scm" + (("\\(%site-dir\\)") + (string-append "\"" + (assoc-ref outputs "out") + "/share/guile/site/2.2\""))))) + (add-after 'unpack 'patch-reference-to-libnss + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "artanis/security/nss.scm" + (("ffi-binding \"libnss3\"") + (string-append + "ffi-binding \"" + (assoc-ref inputs "nss") "/lib/nss/libnss3.so" + "\""))) + #t)) + (add-before 'install 'substitute-root-dir + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (substitute* "Makefile" ;ignore the execution of bash.bashrc + ((" /etc/bash.bashrc") " /dev/null")) + (substitute* "Makefile" ;set the root of config files to OUT + ((" /etc") (string-append " " out "/etc"))) + (mkdir-p (string-append out "/bin")) ;for the `art' executable + #t))) + (add-after 'install 'wrap-art + (lambda* (#:key inputs outputs #:allow-other-keys) + (let* ((out (assoc-ref outputs "out")) + (bin (string-append out "/bin")) + (scm (string-append out "/share/guile/site/2.2")) + (go (string-append out "/lib/guile/2.2/site-ccache"))) + (wrap-program (string-append bin "/art") + `("GUILE_LOAD_PATH" ":" prefix + (,scm ,(getenv "GUILE_LOAD_PATH"))) + `("GUILE_LOAD_COMPILED_PATH" ":" prefix + (,go ,(getenv "GUILE_LOAD_COMPILED_PATH")))) + #t)))))) + (synopsis "Web application framework written in Guile") + (description "GNU Artanis is a web application framework written in Guile Scheme. A web application framework (WAF) is a software framework that is designed to support the development of dynamic websites, web applications, web services and web resources. The framework aims to alleviate the overhead @@ -204,8 +213,8 @@ associated with common activities performed in web development. Artanis provides several tools for web development: database access, templating frameworks, session management, URL-remapping for RESTful, page caching, and more.") - (home-page "https://www.gnu.org/software/artanis/") - (license (list license:gpl3+ license:lgpl3+))))) ;dual license + (home-page "https://www.gnu.org/software/artanis/") + (license (list license:gpl3+ license:lgpl3+)))) ;dual license ;; There has not been any release yet. (define-public guildhall @@ -912,7 +921,7 @@ tracker's SOAP service, such as @url{https://bugs.gnu.org}.") (define-public guile-email (package (name "guile-email") - (version "0.2.1") + (version "0.2.2") (source (origin (method url-fetch) @@ -921,7 +930,7 @@ tracker's SOAP service, such as @url{https://bugs.gnu.org}.") version ".tar.lz")) (sha256 (base32 - "1ph3pb69hr3d8mj05fmbpf5rc67dlm8qnb35cc7cxz8ingvl7kv3")))) + "1rc8r0fgvflnyq5ckl7ii8sghpsgpkzxa8vskjr1ak2kyar6m35k")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config) @@ -2002,59 +2011,67 @@ The picture values can directly be displayed in Geiser.") (license license:lgpl3+)))) (define-public guile-studio - (let ((commit "98fbbbd08de396cd8a0e45f2a4badf1c733a5772") - (revision "3")) - (package - (name "guile-studio") - (version (git-version "0.0.1" revision commit)) - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://git.elephly.net/software/guile-studio.git") - (commit commit))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "0rxl5gv2mavycwkl33lcwyb3z71j2f4zyzk60k7vl3hzszpr08iq")))) - (build-system gnu-build-system) - (arguments - `(#:tests? #f ; there are none - #:make-flags - (list (string-append "ICONS_DIR=" - (assoc-ref %build-inputs "adwaita-icon-theme") - "/share/icons/Adwaita/") - (string-append "PICT_DIR=" - (assoc-ref %build-inputs "guile-picture-language")) - (string-append "EMACS_DIR=" - (assoc-ref %build-inputs "emacs")) - (string-append "GUILE_DIR=" - (assoc-ref %build-inputs "guile")) - (string-join (cons "INPUTS=" (map cdr %build-inputs))) - (string-append "PREFIX=" (assoc-ref %outputs "out"))) - #:phases - (modify-phases %standard-phases - (delete 'configure) - (delete 'install)))) - (inputs - `(("guile" ,guile-2.2) - ("guile-picture-language" ,guile-picture-language) - ("emacs" ,emacs) - ("emacs-geiser" ,emacs-geiser) - ("emacs-company" ,emacs-company) - ("emacs-flycheck" ,emacs-flycheck) - ("emacs-smart-mode-line" ,emacs-smart-mode-line) - ("emacs-paren-face" ,emacs-paren-face) - ("adwaita-icon-theme" ,adwaita-icon-theme))) - (native-inputs - `(("texinfo" ,texinfo))) - (home-page "https://gnu.org/software/guile") - (synopsis "IDE for Guile") - (description - "This is Emacs with a few settings that make working with Guile easier + (package + (name "guile-studio") + (version "0.0.2") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://git.elephly.net/software/guile-studio.git") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "10ls4ra148hd9ra7sin4kh9vv0am5pwk48p7dsjhrlg2l1hsh4hi")))) + (build-system gnu-build-system) + (arguments + `(#:modules + ((ice-9 match) + (srfi srfi-1) + ,@%gnu-build-system-modules) + #:tests? #f ; there are none + #:make-flags + (list (string-append "ICONS_DIR=" + (assoc-ref %build-inputs "adwaita-icon-theme") + "/share/icons/Adwaita/") + (string-append "PICT_DIR=" + (assoc-ref %build-inputs "guile-picture-language")) + (string-append "EMACS_DIR=" + (assoc-ref %build-inputs "emacs")) + (string-append "GUILE_DIR=" + (assoc-ref %build-inputs "guile")) + (string-join (cons "INPUTS=" + (filter-map + (lambda (input) + (match input + ((label . pkg) + (and (string-prefix? "emacs" label) pkg)))) + %build-inputs))) + (string-append "PREFIX=" (assoc-ref %outputs "out"))) + #:phases + (modify-phases %standard-phases + (delete 'configure) + (delete 'install)))) + (inputs + `(("guile" ,guile-2.2) + ("guile-picture-language" ,guile-picture-language) + ("emacs" ,emacs) + ("emacs-geiser" ,emacs-geiser) + ("emacs-company" ,emacs-company) + ("emacs-flycheck" ,emacs-flycheck) + ("emacs-smart-mode-line" ,emacs-smart-mode-line) + ("emacs-paren-face" ,emacs-paren-face) + ("adwaita-icon-theme" ,adwaita-icon-theme))) + (native-inputs + `(("texinfo" ,texinfo))) + (home-page "https://gnu.org/software/guile") + (synopsis "IDE for Guile") + (description + "This is Emacs with a few settings that make working with Guile easier for people new to Emacs. Features include: CUA mode, Geiser, tool bar icons to evaluate Guile buffers, support for Guile's very own picture language, code completion, a simple mode line, etc.") - (license license:gpl3+)))) + (license license:gpl3+))) (define-public guile-stis-parser (let ((commit "6e85d37ffc333b722f4413a6c648263701eb75bd") diff --git a/gnu/packages/guile.scm b/gnu/packages/guile.scm index 889635a345..1f767e3b3d 100644 --- a/gnu/packages/guile.scm +++ b/gnu/packages/guile.scm @@ -288,14 +288,14 @@ without requiring the source code to be rewritten.") (package (inherit guile-2.2) (name "guile-next") - (version "2.9.6") + (version "2.9.7") (source (origin (inherit (package-source guile-2.2)) (uri (string-append "ftp://alpha.gnu.org/gnu/guile/guile-" version ".tar.xz")) (sha256 (base32 - "09rihg5bhzhdk6hfkpav6ajny69dflabgvnm8r7lran723gy5vbf")))) + "1dskpj8a2gl3h8si4virq8z4y06v9ywyadfa92gn2fiip2qmkw0d")))) (native-search-paths (list (search-path-specification (variable "GUILE_LOAD_PATH") @@ -587,21 +587,28 @@ Guile's foreign function interface.") (define-public guile-bytestructures (package (name "guile-bytestructures") - (version "1.0.6") + (version "1.0.7") + (home-page "https://github.com/TaylanUB/scheme-bytestructures") (source (origin - (method url-fetch) - (uri (string-append "https://github.com/TaylanUB/scheme-bytestructures" - "/releases/download/v" version - "/bytestructures-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url home-page) + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "07dffrmc6cnw9mmw0pdrqlkbhzzpz0hm8p26z738l2j5i84dypnk")))) + "0q0habjiy3h9cigb7q1br9kz6z212dn2ab31f6dgd3rrmsfn5rvb")))) (build-system gnu-build-system) + (arguments + '(#:make-flags + '("GUILE_AUTO_COMPILE=0"))) ;to prevent guild warnings (native-inputs - `(("pkg-config" ,pkg-config))) + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("pkg-config" ,pkg-config) + ("guile" ,guile-2.2))) (inputs `(("guile" ,guile-2.2))) - (home-page "https://github.com/TaylanUB/scheme-bytestructures") (synopsis "Structured access to bytevector contents for Guile") (description "Guile bytestructures offers a system imitating the type system diff --git a/gnu/packages/haskell-apps.scm b/gnu/packages/haskell-apps.scm index d5c31cbb0b..91436f9b61 100644 --- a/gnu/packages/haskell-apps.scm +++ b/gnu/packages/haskell-apps.scm @@ -270,14 +270,14 @@ unique algebra of patches called @url{http://darcs.net/Theory,Patchtheory}. (define-public git-annex (package (name "git-annex") - (version "7.20191114") + (version "7.20191218") (source (origin (method url-fetch) (uri (string-append "https://hackage.haskell.org/package/" "git-annex/git-annex-" version ".tar.gz")) (sha256 - (base32 "1afrn5g3b80f3n6ncfph6pmf9jdpc7a6ay55k2pmkn96pyv4hfmm")))) + (base32 "1dy5255x2cx68313p6vchqy5q1l0na8ckf5mkfi080hkhq8vj2q6")))) (build-system haskell-build-system) (arguments `(#:configure-flags diff --git a/gnu/packages/haskell-xyz.scm b/gnu/packages/haskell-xyz.scm index fb6833207d..716d14d7fb 100644 --- a/gnu/packages/haskell-xyz.scm +++ b/gnu/packages/haskell-xyz.scm @@ -3998,6 +3998,29 @@ directories. It includes code for pattern matching, finding files, modifying file contents, and more.") (license license:bsd-3))) +(define-public ghc-filepath-bytestring + (package + (name "ghc-filepath-bytestring") + (version "1.4.2.1.1") + (source + (origin + (method url-fetch) + (uri (string-append + "https://hackage.haskell.org/package/filepath-bytestring/" + "filepath-bytestring-" version ".tar.gz")) + (sha256 + (base32 + "06shdskjj391hb9295slm9gg2rbn5fdq5v6fg0mgn3yl5dv8q5dx")))) + (build-system haskell-build-system) + (native-inputs + `(("ghc-quickcheck" ,ghc-quickcheck))) + (home-page "http://hackage.haskell.org/package/filepath-bytestring") + (synopsis "Library for manipulating RawFilePaths in a cross-platform way") + (description "This package provides a drop-in replacement for the standard +@code{filepath} library, operating on @code{RawFilePath} values rather than +@code{FilePath} values to get the speed benefits of using @code{ByteStrings}.") + (license license:bsd-3))) + (define-public ghc-findbin (package (name "ghc-findbin") diff --git a/gnu/packages/image-viewers.scm b/gnu/packages/image-viewers.scm index d05078c540..eef2866b4b 100644 --- a/gnu/packages/image-viewers.scm +++ b/gnu/packages/image-viewers.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2013, 2017, 2018, 2019 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2014 Ian Denhardt <ian@zenhack.net> ;;; Copyright © 2015, 2016 Alex Kost <alezost@gmail.com> -;;; Copyright © 2016, 2017, 2018 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2016, 2017, 2018, 2019 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017 Alex Griffin <a@ajgrf.com> ;;; Copyright © 2017 ng0 <ng0@n0.is> ;;; Copyright © 2017 Mathieu Othacehe <m.othacehe@gmail.com> @@ -307,7 +307,7 @@ your images. Among its features are: (define-public catimg (package (name "catimg") - (version "2.5.0") + (version "2.6.0") (source (origin (method git-fetch) @@ -316,7 +316,7 @@ your images. Among its features are: (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "0n74iczzgxrcq3zpa7ndycb9rinm829yvf81c747q4ngv5q6pzcm")))) + (base32 "0g9ywbgy162wiam9hc3yqpq5q4gyxa8fj4jskr3fdz8z8jjaabzz")))) (build-system cmake-build-system) (arguments `(#:tests? #f ; no tests diff --git a/gnu/packages/image.scm b/gnu/packages/image.scm index 9ab97fa163..c433429656 100644 --- a/gnu/packages/image.scm +++ b/gnu/packages/image.scm @@ -853,7 +853,7 @@ compose, and analyze GIF images.") (define-public imlib2 (package (name "imlib2") - (version "1.6.0") + (version "1.6.1") (source (origin (method url-fetch) (uri (string-append @@ -861,7 +861,7 @@ compose, and analyze GIF images.") "/imlib2-" version ".tar.bz2")) (sha256 (base32 - "07b9v3ycwhici35fnczvpyjpgkc7gbcdhajpl9dwhpzdzbfl1i6g")))) + "0v8n3dswx7rxqfd0q03xwc7j2w1mv8lv18rdxv487a1xw5vklfad")))) (build-system gnu-build-system) (native-inputs `(("pkgconfig" ,pkg-config))) diff --git a/gnu/packages/imagemagick.scm b/gnu/packages/imagemagick.scm index 74fbf9158a..b8189c8ca8 100644 --- a/gnu/packages/imagemagick.scm +++ b/gnu/packages/imagemagick.scm @@ -170,7 +170,7 @@ script.") (define-public graphicsmagick (package (name "graphicsmagick") - (version "1.3.32") + (version "1.3.33") (source (origin (method url-fetch) @@ -182,8 +182,7 @@ script.") "GraphicsMagick/" (version-major+minor version) "/GraphicsMagick-" version ".tar.xz"))) (sha256 - (base32 - "1qclp9i31idpcbbqswmnq2q11lmv0a7cvdb1y72xcky8sshaahmq")))) + (base32 "0y67dl6xbk1pxndppa93hhlq9i6bpcjw39gb4i8hnn1klqqb630k")))) (build-system gnu-build-system) (arguments `(#:configure-flags diff --git a/gnu/packages/ipfs.scm b/gnu/packages/ipfs.scm index 39c22262c1..49612425fb 100644 --- a/gnu/packages/ipfs.scm +++ b/gnu/packages/ipfs.scm @@ -104,7 +104,7 @@ that are shared between @command{go-ipfs/commands} and its rewrite (define-public gx (package (name "gx") - (version "0.14.1") + (version "0.14.2") (source (origin (method git-fetch) @@ -113,8 +113,7 @@ that are shared between @command{go-ipfs/commands} and its rewrite (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 - "0pfx2p59xdbmqzfbgaf8xvlnzh8m05hkg596glq5kvl8ib65i4ha")))) + (base32 "048bx6khzcwxnvz3lf7kgp6fkg8mxqcqchxh0jxm9fg2iwizsi0k")))) (build-system go-build-system) (arguments '(#:import-path "github.com/whyrusleeping/gx")) diff --git a/gnu/packages/java-graphics.scm b/gnu/packages/java-graphics.scm new file mode 100644 index 0000000000..bc9972eb0a --- /dev/null +++ b/gnu/packages/java-graphics.scm @@ -0,0 +1,123 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2019 Ricardo Wurmus <rekado@elephly.net> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages java-graphics) + #:use-module ((guix licenses) #:prefix license:) + #:use-module (guix packages) + #:use-module (guix git-download) + #:use-module (guix utils) + #:use-module (guix build-system ant) + #:use-module (gnu packages) + #:use-module (gnu packages java) + #:use-module (gnu packages xorg) + #:use-module (ice-9 match)) + +(define-public java-piccolo2d-core + (package + (name "java-piccolo2d-core") + (version "3.0.1") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/piccolo2d/piccolo2d.java") + (commit (string-append "piccolo2d-complete-" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1k6gw643k83516lcw04mgac2yi75phdrng44pz9xk6hz066ip21s")))) + (build-system ant-build-system) + (arguments + `(#:jar-name "piccolo2d-core.jar" + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'chdir + (lambda _ (chdir "core") #t))))) + (inputs + `(("java-junit" ,java-junit))) + (home-page "http://piccolo2d.org") + (synopsis "Structured 2D graphics framework") + (description "Piccolo2D is a framework (in the Jazz ZUI tradition) to +create robust, full-featured graphical applications in Java, with features +such as zooming and multiple representation. This package provides the core +libraries.") + (license license:bsd-3))) + +(define-public java-piccolo2d-extras + (package (inherit java-piccolo2d-core) + (name "java-piccolo2d-extras") + (arguments + `(#:jar-name "piccolo2d-extras.jar" + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'chdir + (lambda _ (chdir "extras") #t)) + (add-after 'chdir 'remove-failing-test + (lambda _ + ;; TODO: These both fail with "Unable to convolve src image" + (delete-file "src/test/java/org/piccolo2d/extras/nodes/PShadowTest.java") + (delete-file "src/test/java/org/piccolo2d/extras/util/ShadowUtilsTest.java") + #t)) + (add-before 'check 'start-xorg-server + (lambda* (#:key inputs #:allow-other-keys) + ;; The test suite requires a running X server. + (system (string-append (assoc-ref inputs "xorg-server") + "/bin/Xvfb :1 -screen 0 640x480x24 &")) + (setenv "DISPLAY" ":1") + #t))))) + (inputs + `(("java-piccolo2d-core" ,java-piccolo2d-core) + ("java-junit" ,java-junit))) + (native-inputs + `(("xorg-server" ,xorg-server))) ; for tests + (description "Piccolo2D is a framework (in the Jazz ZUI tradition) to +create robust, full-featured graphical applications in Java, with features +such as zooming and multiple representation. This package provides additional +features not found in the core libraries."))) + +(define-public java-marlin-renderer + (package + (name "java-marlin-renderer") + (version "0.9.4.2") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/bourgesl/marlin-renderer.git") + (commit (string-append "v" (string-map (match-lambda + (#\. #\_) + (c c)) + version))))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "12vb8fmxf1smnyv6w8i1khahy76v6r29j1qwabbykxff8i9ndxqv")))) + (build-system ant-build-system) + (arguments + `(#:jar-name "marlin.jar" + #:test-include (list "src/test/java/RunJUnitTest.java"))) + (inputs + `(("java-hamcrest-core" ,java-hamcrest-core) + ("java-junit" ,java-junit))) + (home-page "https://github.com/bourgesl/marlin-renderer/") + (synopsis "Rendering engine") + (description "Marlin is a Java2D @code{RenderingEngine} optimized for +performance (improved memory usage and footprint, better multi-threading) and +better visual quality based on OpenJDK's @code{pisces} implementation. It +handles shape rendering (@code{Graphics2D} @code{draw(Shape)} / +@code{fill(Shape)} with stroke and dash attributes.") + ;; With Classpath Exception + (license license:gpl2))) diff --git a/gnu/packages/java.scm b/gnu/packages/java.scm index cc63ccf19a..c4cbcbdc1b 100644 --- a/gnu/packages/java.scm +++ b/gnu/packages/java.scm @@ -1,3 +1,4 @@ + ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015, 2016, 2017, 2018, 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2016 Leo Famulari <leo@famulari.name> @@ -1429,7 +1430,14 @@ bootstrapping purposes.") ("armhf-linux" "/lib/arm") ("aarch64-linux" - "/lib/aarch64"))))) + "/lib/aarch64") + ;; We need a catch-all, dropping + ;; '-linux' works in most cases. + (_ + (string-append + "/lib/" + (string-drop-right + (%current-system) 6))))))) (symlink (string-append lib-path "/server/libjvm.so") (string-append lib-path "/libjvm.so"))) #t)) @@ -11478,7 +11486,7 @@ network protocols, and core version control algorithms.") (define-public abcl (package (name "abcl") - (version "1.5.0") + (version "1.6.0") (source (origin (method url-fetch) @@ -11486,7 +11494,7 @@ network protocols, and core version control algorithms.") version "/abcl-src-" version ".tar.gz")) (sha256 (base32 - "1hhvcg050nfpjbdmskc1cv2j38qi6qfl77a61b5cxx576kbff3lj")) + "0hvbcsffr8n2xwdixc8wyw1bfl9fxn2gyy0c4nma7j9zbn0wwgw9")) (patches (search-patches "abcl-fix-build-xml.patch")))) @@ -11680,7 +11688,9 @@ IPTC, XMP, ICC and more formats.") "1zv3kjdkf6iqf02x6ln76254y634j2ji448y706a65lsbfjmmicf")) (modules '((guix build utils))) (snippet - `(for-each delete-file (find-files "." ".*.jar"))) + '(begin + (for-each delete-file (find-files "." ".*.jar")) + #t)) (patches (search-patches "java-svg-salamander-Fix-non-det.patch")))) (build-system ant-build-system) diff --git a/gnu/packages/kde-frameworks.scm b/gnu/packages/kde-frameworks.scm index ee6c8ea485..9230bb71c0 100644 --- a/gnu/packages/kde-frameworks.scm +++ b/gnu/packages/kde-frameworks.scm @@ -1,6 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015 Andreas Enge <andreas@enge.fr> -;;; Copyright © 2016 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2016, 2019 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2016-2019 Hartmut Goebel <h.goebel@crazy-compilers.com> ;;; Copyright © 2016 David Craven <david@craven.ch> ;;; Copyright © 2017 Thomas Danckaert <post@thomasdanckaert.be> @@ -193,12 +193,12 @@ common build settings used in software produced by the KDE community.") (build-system cmake-build-system) (native-inputs `(("extra-cmake-modules" ,extra-cmake-modules) - ("pkg-config" ,pkg-config))) + ("pkg-config" ,pkg-config) + ("qttools" ,qttools))) (inputs `(("qtbase" ,qtbase) ("phonon" ,phonon) ("qtbase" ,qtbase) - ("qttools" ,qttools) ("qtx11extras" ,qtx11extras) ("gstreamer" ,gstreamer) ("gst-plugins-base" ,gst-plugins-base) @@ -3257,7 +3257,8 @@ library.") `(("ki18n" ,ki18n) ("sonnet" ,sonnet))) (native-inputs - `(("extra-cmake-modules" ,extra-cmake-modules))) + `(("extra-cmake-modules" ,extra-cmake-modules) + ("qttools" ,qttools))) (inputs `(("kauth" ,kauth) ("kcodecs" ,kcodecs) @@ -3270,8 +3271,7 @@ library.") ("kwidgetsaddons" ,kwidgetsaddons) ("kwindowsystem" ,kwindowsystem) ("qtbase" ,qtbase) - ("qtspeech" ,qtspeech) - ("qttools" ,qttools))) + ("qtspeech" ,qtspeech))) (arguments `(#:phases (modify-phases %standard-phases @@ -3495,6 +3495,45 @@ script engines.") ;; dual licensed (license (list license:gpl2+ license:lgpl2.1+)))) +(define-public purpose + (package + (name "purpose") + (version "5.63.0") + (source (origin + (method url-fetch) + (uri (string-append + "mirror://kde/stable/frameworks/" + (version-major+minor version) "/" + name "-" version ".tar.xz")) + (sha256 + (base32 + "1mc5z131z9da6qjhlxqz64ys4fgq38iryna58f8l04x8f9igjn8f")))) + (build-system cmake-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules))) + (inputs + `(;;TODO: ("kaccounts" ,kaccounts) + ("kconfig" ,kconfig) + ("kcoreaddons" ,kcoreaddons) + ("knotifications" ,knotifications) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("kirigami" ,kirigami) + ("qtbase" ,qtbase) + ("qtdeclarative" ,qtdeclarative))) + (arguments + `(#:tests? #f ;; seem to require network; don't find QTQuick components + #:configure-flags '("-DBUILD_TESTING=OFF"))) ; not run anyway + (home-page "https://community.kde.org/Frameworks") + (synopsis "Offers available actions for a specific purpose") + (description "This framework offers the possibility to create integrate +services and actions on any application without having to implement them +specifically. Purpose will offer them mechanisms to list the different +alternatives to execute given the requested action type and will facilitate +components so that all the plugins can receive all the information they +need.") + (license license:lgpl2.1+))) + ;; This version of kdbusaddons does not use kinit as an input, and is used to ;; build kinit-bootstrap, as well as bootstrap versions of all kinit ;; dependencies which also rely on kdbusaddons. diff --git a/gnu/packages/kde-multimedia.scm b/gnu/packages/kde-multimedia.scm new file mode 100644 index 0000000000..e87df550a9 --- /dev/null +++ b/gnu/packages/kde-multimedia.scm @@ -0,0 +1,693 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2017, 2019 Hartmut Goebel <h.goebel@crazy-compilers.com> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages kde-multimedia) + #:use-module (guix build-system qt) + #:use-module (guix download) + #:use-module ((guix licenses) #:prefix license:) + #:use-module (guix packages) + #:use-module (guix utils) + #:use-module (gnu packages) + #:use-module (gnu packages audio) + #:use-module (gnu packages base) + #:use-module (gnu packages compression) + #:use-module (gnu packages cdrom) + #:use-module (gnu packages glib) + #:use-module (gnu packages gtk) + #:use-module (gnu packages gnome) + #:use-module (gnu packages gstreamer) + #:use-module (gnu packages kde-frameworks) + #:use-module (gnu packages libcanberra) + #:use-module (gnu packages linux) + #:use-module (gnu packages mp3) + #:use-module (gnu packages music) + #:use-module (gnu packages pkg-config) + #:use-module (gnu packages pulseaudio) + #:use-module (gnu packages qt) + #:use-module (gnu packages video) + #:use-module (gnu packages xiph) + #:use-module (gnu packages xorg)) + +(define-public audiocd-kio + (package + (name "audiocd-kio") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/audiocd-kio-" version ".tar.xz")) + (sha256 + (base32 "1924w7li16qkmqsvbgfihjd7id6mb00m9k3acfwkkf32yzg3dn4q")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("cdparanoia" ,cdparanoia) + ("flac" ,flac) + ("kcmutils" ,kcmutils) + ("kconfig" ,kconfig) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("libkcddb" ,libkcddb) + ("libkcompactdisc", libkcompactdisc) + ("libvorbis" ,libvorbis) + ("phonon" ,phonon) + ("qtbase" ,qtbase))) + (home-page "https://kde.org/applications/multimedia/org.kde.kio_audiocd") + (synopsis "Transparent audio CD integration for applications using the KDE +Platform") + (description "KIO AudioCD is a KIO slave that enables KIO-aware +applications (such as Dolphin or k3b) to access audio and CD text data on the +audio compact disks. It allows transparent drag and drop conversion of audio +data into the popular formats and has a configuration System Settings module +available in the \"Multimedia\" section. + +This package is part of the KDE multimedia module.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public dragon + (package + (name "dragon") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/dragon-" version ".tar.xz")) + (sha256 + (base32 "02l16k4sgrxbczxp8rlnxbylb5fmjh4zhl4xw55qxkvmvxnjy5zr")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kconfig" ,kconfig) + ("kconfigwidgets" ,kconfigwidgets) + ("kcoreaddons" ,kcoreaddons) + ("kcrash" ,kcrash) + ("kdbusaddons" ,kdbusaddons) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("kjobwidgets" ,kjobwidgets) + ("knotifications" ,knotifications) + ("kparts" ,kparts) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("phonon" ,phonon) + ("phonon-backend-gstreamer" ,phonon-backend-gstreamer) + ("qtbase" ,qtbase) + ("solid" ,solid))) + (home-page "https://kde.org/applications/multimedia/org.kde.dragonplayer") + (synopsis "Simple video player") + (description "Dragon Player is a multimedia player where the focus is on +simplicity, instead of features. Dragon Player does one thing, and only one +thing, which is playing multimedia files. It's simple interface is designed +not to get in your way and instead empower you to simply play multimedia +files. + +This package is part of the KDE multimedia module.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public elisa + (package + (name "elisa") + (version "0.4.2") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde//stable/elisa/0.4.2" + "/elisa-" version ".tar.xz")) + (sha256 + (base32 "0v9af6l89pgz1g7naf7gwcnq8znlicyh7z985kxalbdmv359c97w")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("pkg-config" ,pkg-config) + ("dbus" ,dbus) + ("kdoctools" ,kdoctools) + ("xorg-server" , xorg-server-for-tests))) + (inputs + `(("kconfig" ,kconfig) + ("baloo" ,baloo) + ("kconfigwidgets" ,kconfigwidgets) + ("kcoreaddons" ,kcoreaddons) + ("kcrash" ,kcrash) + ("kcmutils" ,kcmutils) + ("kdbusaddons" ,kdbusaddons) + ("kdeclarative" ,kdeclarative) + ("kfilemetadata" ,kfilemetadata) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("kirigami" ,kirigami) + ("kmediaplayer" ,kmediaplayer) + ("kparts" ,kparts) + ("kpackage" ,kpackage) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("phonon" ,phonon) + ("qtbase" ,qtbase) + ("qtdeclarative" ,qtdeclarative) + ("qtgraphicaleffects" ,qtgraphicaleffects) ; not listed as dependency + ("qtmultimedia" ,qtmultimedia) + ("qtquickcontrols" ,qtquickcontrols) + ("qtquickcontrols2" ,qtquickcontrols2) + ("qtsvg" ,qtsvg) + ("qtx11extras" ,qtx11extras) + ;; TODO: upnpqt https://gitlab.com/homeautomationqt/upnp-player-qt + ("vlc" ,vlc))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'check 'start-xorg-server + (lambda* (#:key inputs #:allow-other-keys) + ;; The test suite requires a running X server, setting + ;; QT_QPA_PLATFORM=offscreen does not suffice. + (system (string-append (assoc-ref inputs "xorg-server") + "/bin/Xvfb :1 -screen 0 640x480x24 &")) + (setenv "DISPLAY" ":1") + #t))))) + (home-page "https://kde.org/applications/multimedia/org.kde.elisa") + (synopsis "Powerful music player for Plasma 5") + (description "Elisa is a simple music player aiming to provide a nice +experience for its users. Elisa allows to browse music by album, artist or +all tracks. The music is indexed using either a private indexer or an indexer +using Baloo. The private one can be configured to scan music on chosen paths. +The Baloo one is much faster because Baloo is providing all needed data from +its own database. You can build and play your own playlist.") + (license license:lgpl3+))) + +(define-public ffmpegthumbs + (package + (name "ffmpegthumbs") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/ffmpegthumbs-" version ".tar.xz")) + (sha256 + (base32 "1w6070ng40nf99wpl6p5s8nx0icfx2c26vvnz4f9fx7l7pldh6n9")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("pkg-config" ,pkg-config))) + (inputs + `(("ffmpeg" ,ffmpeg) + ("kconfig" ,kconfig) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("qtbase" ,qtbase))) + (home-page "https://kde.org/applications/multimedia/org.kde.ffmpegthumbs") + (synopsis "Video thumbnail generator for KDE using ffmpeg") + (description " +FFMpegThumbs is a video thumbnail generator for KDE file managers +like Dolphin and Konqueror. It enables them to show preview images +of video files using FFMpeg. + +This package is part of the KDE multimedia module.") + (license license:gpl2+))) + +(define-public juk + (package + (name "juk") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/juk-" version ".tar.xz")) + (sha256 + (base32 "0c1hrd1n4ah7qm8xr7bfswgbcmbvnnhai4bfawx6v6ab3frl7wvf")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules))) + (inputs + `(("kcoreaddons" ,kcoreaddons) + ("kcompletion" ,kcompletion) + ("kconfig" ,kconfig) + ("kcrash" ,kcrash) + ("kdbusaddons" ,kdbusaddons) + ("kdoctools" ,kdoctools) + ("kglobalaccel" ,kglobalaccel) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kjobwidgets" ,kjobwidgets) + ("kio" ,kio) + ("knotifications" ,knotifications) + ("ktextwidgets" ,ktextwidgets) + ("kwallet" ,kwallet) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("phonon" ,phonon) + ("phonon-backend-gstreamer" ,phonon-backend-gstreamer) + ("qtbase" ,qtbase) + ("qtsvg" ,qtsvg) + ("taglib" ,taglib))) + (home-page "https://kde.org/applications/multimedia/org.kde.juk") + (synopsis "Music jukebox / music player") + (description "JuK is a powerful music player capable of managing a large +music collection. + +Some of JuK's features include: +@itemize +@item Music collection, playlists, and smart playlists +@item Tag editing support, including the ability to edit multiple files at once +@item Tag-based music file organization and renaming +@item CD burning support using k3b +@item Album art using Google Image Search +@end itemize + +This package is part of the KDE multimedia module.") + (license license:gpl2+))) + +(define-public k3b + (package + (name "k3b") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/k3b-" version ".tar.xz")) + (sha256 + (base32 "08rbiy1hz650srdksr7ciq8dpcz20wczs22613pghrpgm5zsczhr")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("pkg-config" ,pkg-config) + ("kdoctools" ,kdoctools))) + (inputs + `(("ffmpeg" ,ffmpeg) + ("flac" ,flac) + ("karchive" ,karchive) + ("kcmutils" ,kcmutils) + ("kconfig" ,kconfig) + ("kcoreaddons" ,kcoreaddons) + ("kfilemetadata" ,kfilemetadata) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kio" ,kio) + ("kjobwidgets" ,kjobwidgets) + ("knewstuff" ,knewstuff) + ("knotifications" ,knotifications) + ("knotifyconfig" ,knotifyconfig) + ("kservice" ,kservice) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kxmlgui" ,kxmlgui) + ("lame" ,lame) + ("libdvdread" ,libdvdread) + ;; TODO: LibFuzzer + ("libiconv" ,libiconv) + ("libkcddb" ,libkcddb) + ("libmad" ,libmad) + ("libmpcdec" ,libmpcdec) ;; FIXME: why does cmake not find this? + ;;("libmusicbrainz" ,libmusicbrainz) ; wants old version 2 + ("libsamplerate" ,libsamplerate) + ("libsndfile" ,libsndfile) + ("libvorbis" ,libvorbis) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("qtbase" ,qtbase) + ("qtwebkit" ,qtwebkit) + ("shared-mime-info" ,shared-mime-info) + ("solid" ,solid) + ("taglib" ,taglib))) + (home-page "https://kde.org/applications/multimedia/org.kde.k3b") + (synopsis "Sophisticated CD/DVD burning application") + (description "K3b is CD-writing software which intends to be feature-rich +and provide an easily usable interface. Features include burning audio CDs +from .WAV and .MP3 audio files, configuring external programs and configuring +devices.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public kaffeine + (package + (name "kaffeine") + (version "2.0.18") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/kaffeine" + "/kaffeine-" version ".tar.xz")) + (sha256 + (base32 "10dnhr9v2jlki44i3gmjagky66ybixmv6f29z5imk9clgddrlyfr")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("pkg-config" ,pkg-config) + ("kdoctools" ,kdoctools))) + (inputs + `(("eudev" ,eudev) + ("kcoreaddons" ,kcoreaddons) + ("kdbusaddons" ,kdbusaddons) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("libxscrnsaver" ,libxscrnsaver) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("qtbase" ,qtbase) + ("qtx11extras" ,qtx11extras) + ("solid" ,solid) + ("v4l-utils" ,v4l-utils) ; libdvbv5 + ("vlc" ,vlc))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'fix-code + (lambda _ + (substitute* "src/dvb/dvbdevice_linux.cpp" + (("\\s*qPrintable\\(transponder\\.getTransmissionType\\(\\)\\)\\);") + "transponder.getTransmissionType());")) + #t))))) + (home-page "https://kde.org/applications/multimedia/org.kde.kaffeine") + (synopsis "Versatile media player for KDE") + (description "Kaffeine is a media player for KDE. While it supports +multiple Phonon backends, its default backend is Xine, giving Kaffeine a wide +variety of supported media types and letting Kaffeine access CDs, DVDs, and +network streams easily. + +Kaffeine can keep track of multiple playlists simultaneously, and supports +autoloading of subtitle files for use while playing video.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public kamoso + (package + (name "kamoso") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/kamoso-" version ".tar.xz")) + (sha256 + (base32 "0j0lr2gwaxwchgfp54dashm1b39gsaw4ly9p8ybavwwzhjkdqza3")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("glib:bin" ,glib "bin") + ("kdoctools" ,kdoctools) + ("pkg-config" ,pkg-config))) + (inputs + `(("gstreamer" ,gstreamer) + ("gst-plugins-base" ,gst-plugins-base) + ("kconfig" ,kconfig) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("kirigami" ,kirigami) + ("knotifications" ,knotifications) + ("kparts" ,kparts) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("purpose" ,purpose) + ("qtbase" ,qtbase) + ("qtdeclarative" ,qtdeclarative) + ("qtgraphicaleffects" ,qtgraphicaleffects) + ("qtquickcontrols" ,qtquickcontrols) + ("qtquickcontrols2" ,qtquickcontrols2) ; not listed as dependency + ("qtx11extras" ,qtx11extras))) + (arguments + `(#:tests? #f ; test program gets built, but is not found + #:configure-flags + (list (string-append "-DCMAKE_CXX_FLAGS=-I" + (assoc-ref %build-inputs "gst-plugins-base") + "/include/gstreamer-1.0")))) + (home-page "https://kde.org/applications/multimedia/org.kde.kamoso") + (synopsis "Take pictures and videos out of your webcam") + (description "Kamoso is a simple and friendly program to use your +camera. Use it to take pictures and make videos to share.") + (license ;; GPL for programs, LGPL for libraries + (list license:gpl2+ license:lgpl2.0+)))) + +(define-public kmix + (package + (name "kmix") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/kmix-" version ".tar.xz")) + (sha256 + (base32 "1g42hlmpdf0rrgqapps6v47z9cnwpkfzpwgavaq26m5k3bpanwfg")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("pkg-config" ,pkg-config))) + (inputs + `(("alsa-lib" ,alsa-lib) + ("glib" ,glib) + ("kconfigwidgets" ,kconfigwidgets) + ("kcompletion" ,kcompletion) + ("kconfig" ,kconfig) + ("kconfigwidgets" ,kconfigwidgets) + ("kcrash" ,kcrash) + ("kdbusaddons" ,kdbusaddons) + ("kdoctools" ,kdoctools) + ("kglobalaccel" ,kglobalaccel) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("knotifications" ,knotifications) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("libcanberra" ,libcanberra) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("plasma-framework" ,plasma-framework) + ("pulseaudio" ,pulseaudio) + ("qtbase" ,qtbase) + ("solid" ,solid))) + (home-page "https://kde.org/applications/multimedia/org.kde.kmix") + (synopsis "Volume control and mixer") + (description "KMix is an audio device mixer, used to adjust volume, select +recording inputs, and set other hardware options. + +This package is part of the KDE multimedia module.") + (license ;; GPL for programs, LGPL for libraries, FDL for documentation + (list license:gpl2+ license:lgpl2.0+ license:fdl1.2+)))) + +(define-public kmplayer + (package + (name "kmplayer") + (version "0.12.0b") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/kmplayer/0.12" + "/kmplayer-" version ".tar.bz2")) + (sha256 + (base32 "0wzdxym4fc83wvqyhcwid65yv59a2wvp1lq303cn124mpnlwx62y")) + (patches (search-patches + "kmplayer-aarch64.patch" + "kmplayer-upstream_Fix-build-with-Qt-5.9.patch")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("pkg-config" ,pkg-config) + ("kdoctools" ,kdoctools))) + (inputs + `(("kconfig" ,kconfig) + ("kcoreaddons" ,kcoreaddons) + ("kdelibs4support" ,kdelibs4support) + ("ki18n" ,ki18n) + ("kinit" ,kinit) + ("kio" ,kio) + ("kparts" ,kparts) + ("kmediaplayer" ,kmediaplayer) + ("kwidgetsaddons" ,kwidgetsaddons) + ("libxcb" ,libxcb) ;; FIXME: why does cmake not find XEVIE and XPRINT? + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("phonon" ,phonon) + ("qtbase" ,qtbase) + ("cairo" ,cairo) + ("qtsvg" ,qtsvg) + ("qtx11extras" ,qtx11extras) + ("xcb-util" ,xcb-util) + ("xcb-util-cursor" ,xcb-util-cursor) + ("xcb-util-errors" ,xcb-util-errors) + ("xcb-util-image" ,xcb-util-image) + ("xcb-util-keysyms" ,xcb-util-keysyms) + ("xcb-util-wm" ,xcb-util-wm))) + (arguments + `(#:configure-flags + (list (string-append + "-DCMAKE_CXX_FLAGS=-I" + (assoc-ref %build-inputs "qtx11extras") "/include/qt5")))) + (home-page "https://kde.org/applications/multimedia/org.kde.kmplayer") + (synopsis "Media player using mplayer/phonon as backend") + (description "Kmplayer can play all the audio/video supported by +mplayer/phonon from a local file or URL and be embedded in Konqueror and +KHTML. It also plays DVDs. + +Some features: +@itemize +@item play DVD/VCD movies (from file or url and from a video device) +@item embed inside konqueror (movie is played inside konqueror) +@item embed inside khtml (movie playback inside a html page) +@item Movie recording using mencoder (part of the mplayer package) +@item No video during recording, but you can always open a new window and play it +@item Broadcasting, http streaming, using ffserver/ffmpeg +@item For TV sources, you need v4lctl (part of the xawtv package) +@end itemize") + (license ;; GPL for programs, LGPL for libraries, FDL for documentation + (list license:gpl2+ license:lgpl2.0+ license:fdl1.2+)))) + +(define-public kwave + (package + (name "kwave") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/kwave-" version ".tar.xz")) + (sha256 + (base32 "1vv3m3h9mvjr9sxajccqnvcgvz901n3qxhki0g7vsljvh31x5s5x")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("librsvg" ,librsvg) + ("pkg-config" ,pkg-config) + ("kdoctools" ,kdoctools))) + (inputs + `(("also-lib" ,alsa-lib) + ("audiofile" ,audiofile) + ("flac" ,flac) + ("id3lib" ,id3lib) + ("karchive" ,karchive) + ("kcompletion" ,kcompletion) + ("kconfig" ,kconfig) + ("kconfigwidgets" ,kconfigwidgets) + ("kcoreaddons" ,kcoreaddons) + ("kcrash" ,kcrash) + ("kdbusaddons" ,kdbusaddons) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kio" ,kio) + ("kservice" ,kservice) + ("ktextwidgets" ,ktextwidgets) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kxmlgui" ,kxmlgui) + ("libmad" ,libmad) + ("libsamplerate" ,libsamplerate) + ("libvorbis" ,libvorbis) + ("opus" ,opus) + ("oxygen-icons" ,oxygen-icons) ; default icon set + ("pulseaudio" ,pulseaudio) + ("qtbase" ,qtbase) + ("qtmultimedia" ,qtmultimedia) + ("zlib" ,zlib))) + (home-page "https://kde.org/applications/multimedia/org.kde.kwave") + (synopsis "Sound editor for KDE") + (description "Kwave is a sound editor designed for the KDE Desktop +Environment. + +With Kwave you can record, play back, import and edit many sorts of audio +files including multi-channel files. It includes some plugins to transform +audio files in several ways and presents a graphical view with a complete +zoom- and scroll capability. + +Its features include: +@itemize +@item 24 Bit Support +@item Undo/Redo +@item Use of multicore CPUs (SMP, hyperthreading) +@item Simple Drag & Drop +@item Realtime Pre-Listen for some effects +@item Support for multi-track files +@item Playback and recording via native ALSA (or OSS, deprecated) +@item Playback via PulseAudio and Phonon +@item Load and edit-capability for large files (can use virtual memory) +@item Reading and auto-repair of damaged wav-files +@item Supports multiple windows +@item Extendable Plugin interface +@item a nice splashscreen +@item some label handling +@end itemize") + (license ;; GPL for programs, LGPL for libraries, FDL for documentation + (list license:gpl2+ license:lgpl2.0+ license:fdl1.2+ + license:cc-by-sa3.0 license:cc-by-sa4.0 ;; icons, samples + license:cc0 license:bsd-3)))) ;; utilities files + +(define-public libkcddb + (package + (name "libkcddb") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/libkcddb-" version ".tar.xz")) + (sha256 + (base32 "1rla9sfzpdfiki0p265ga6d1axqpq37825maaw85hm84mg7hkzjn")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kcodecs" ,kcodecs) + ("kconfig" ,kconfig) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("kwidgetsaddons" ,kwidgetsaddons) + ("libmusicbrainz" ,libmusicbrainz) + ("qtbase" ,qtbase))) + (arguments + `(#:tests? #f)) ; Most tests require network + (home-page "https://cgit.kde.org/libkcddb.git") + (synopsis "CDDB library for KDE Platform (runtime)") + (description "A library for retrieving and sending cddb information.") + (license ;; GPL for programs, LGPL for libraries, FDL for documentation + (list license:gpl2+ license:lgpl2.0+ license:fdl1.2+)))) + +(define-public libkcompactdisc + (package + (name "libkcompactdisc") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/libkcompactdisc-" version ".tar.xz")) + (sha256 + (base32 "09gl2dww5i50rpj92ryw4vq5ryy96cv9kflg6yqgdbznmmdqhawi")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules))) + (inputs + `(("alsa-lib" ,alsa-lib) + ("kcoreaddons" ,kcoreaddons) + ("ki18n" ,ki18n) + ("phonon" ,phonon) + ("qtbase" ,qtbase) + ("solid" ,solid))) + (home-page "https://cgit.kde.org/libkcompactdisc.git/") + (synopsis "KDE library for playing & ripping CDs") + (description "KDE library for playing & ripping CDs.") + (license ;; GPL for programs, LGPL for libraries + (list license:gpl2+ license:lgpl2.0+)))) diff --git a/gnu/packages/kde-utils.scm b/gnu/packages/kde-utils.scm new file mode 100644 index 0000000000..9005b5014a --- /dev/null +++ b/gnu/packages/kde-utils.scm @@ -0,0 +1,527 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2017, 2019 Hartmut Goebel <h.goebel@crazy-compilers.com> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (gnu packages kde-utils) + #:use-module (guix build-system qt) + #:use-module (guix download) + #:use-module ((guix licenses) #:prefix license:) + #:use-module (guix packages) + #:use-module (gnu packages compression) + #:use-module (gnu packages gnome) + #:use-module (gnu packages kde) + #:use-module (gnu packages kde-frameworks) + #:use-module (gnu packages kde-plasma) + #:use-module (gnu packages qt) + #:use-module (gnu packages samba) + #:use-module (gnu packages xorg)) + +(define-public kate + (package + (name "kate") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/kate-" version ".tar.xz")) + (sha256 + (base32 "0wgcw10c4grkmsyp79ashwgpy59lgrinwdib4mjclpw2grp0g7xb")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kactivities" ,kactivities) + ("kconfig" ,kconfig) + ("kcrash" ,kcrash) + ("kdbusaddons" ,kdbusaddons) + ("kguiaddons" ,kguiaddons) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kitemmodels" ,kitemmodels) + ("threadweaver" ,threadweaver) + ("knewstuff" ,knewstuff) + ("kio" ,kio) + ("kjobwidgets" ,kjobwidgets) + ("kparts" ,kparts) + ("ktexteditor" ,ktexteditor) + ("kwallet" ,kwallet) + ("plasma-framework" ,plasma-framework) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qtbase" ,qtbase) + ("qtscript" ,qtscript))) + (arguments + `(#:tests? #f ;; 2/7 tests fail + #:phases + (modify-phases %standard-phases + (add-before 'check 'check-setup + (lambda _ + ;; make Qt render "offscreen", required for tests + (setenv "QT_QPA_PLATFORM" "offscreen") + (setenv "XDG_CACHE_HOME" "/tmp/xdg-cache") + #t))))) + (home-page "https://kate-editor.org/") + (synopsis "Multi-document, multi-view text editor") + (description "Kate is a powerful text editor that can open multiple files +simultaneously. + +With a built-in terminal, syntax highlighting, and tabbed sidebar, it performs +as a lightweight but capable development environment. Kate's many tools, +plugins, and scripts make it highly customizable. + +Kate's features include: +@itemize +@item Multiple saved sessions, each with numerous files +@item Scriptable syntax highlighting, indentation, and code-folding +@item Configurable templates and text snippets +@item Symbol viewers for C, C++, and Python +@item XML completion and validation +@end itemize") + (license ;; GPL for programs, LGPL for libraries + (list license:gpl2+ license:lgpl2.0)))) + +(define-public kmag + (package + (name "kmag") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/kmag-" version ".tar.xz")) + (sha256 + (base32 "0l69mgnh2mmkxawwibqdx9n7myl6qqnr2fd3mpsg2bzpcfvmsvi1")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("ki18n" ,ki18n) + ("kio" ,kio) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ;; TODO: QAccessibilityClient - libqaccessibilityclien + ("qtbase" ,qtbase))) + (home-page "https://kde.org/applications/utilities/org.kde.kmag") + (synopsis "Screen magnifier tool") + (description "You can use KMagnifier to magnify a part of the screen just +as you would use a lens to magnify a newspaper fine-print or a photograph. +This application is useful for a variety of people: from researchers to +artists to web-designers to people with low vision.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public kmousetool + (package + (name "kmousetool") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/kmousetool-" version ".tar.xz")) + (sha256 + (base32 "169kk20mkm29nycg2vs1k5cs22gzchqs9hbfd661cy2l7n4d8d04")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kauth" ,kauth) + ("kcoreaddons" ,kcoreaddons) + ("kconfigwidgets", kconfigwidgets) + ("kdbusaddons" ,kdbusaddons) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("knotifications" ,knotifications) + ("kxmlgui" ,kxmlgui) + ("kwindowsystem" ,kwindowsystem) + ("libxtst" ,libxtst) + ("libxt" ,libxt) + ("phonon" ,phonon) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qtbase" ,qtbase))) + (home-page "https://kde.org/applications/utilities/org.kde.kmousetool") + (synopsis "Automatic mouse click and mouse manipulation tool for the +disabled") + (description "KMouseTool clicks the mouse whenever the mouse cursor pauses +briefly. It was designed to help those with repetitive strain injuries, for +whom pressing buttons hurts.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public kmouth + (package + (name "kmouth") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/kmouth-" version ".tar.xz")) + (sha256 + (base32 "1agjxf1jfi967hj1iz788n6cna6fr7qg80zsx6s119hg7b0xwqmr")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kcompletion" ,kcompletion) + ("kconfig", kconfig) + ("kconfigwidgets", kconfigwidgets) + ("kcoreaddons" ,kcoreaddons) + ("kcrash" ,kcrash) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qtbase" ,qtbase) + ("qtspeech" ,qtspeech))) + (home-page "https://kde.org/applications/utilities/org.kde.kmouth") + (synopsis "Type-and-say frontend for speech synthesizers") + (description "KMouth is a program which enables persons that cannot speak +to let their computer speak, e.g. mutal people or people who have lost their +voice. It has a text input field and speaks the sentences that you enter. It +also has support for user defined phrasebooks. + +It includes a history of spoken sentences from which the user can select +sentences to be re-spoken.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public kronometer + (package + (name "kronometer") + (version "2.2.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/kronometer/" version + "/src/kronometer-" version ".tar.xz")) + (sha256 + (base32 "05hs8729a3aqjpwmn2xdf2sriacrll4sj4ax3lm4s1ravj09n9bm")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kauth" ,kauth) + ("kconfig" ,kconfig) + ("kconfigwidgets", kconfigwidgets) + ("kcoreaddons" ,kcoreaddons) + ("kcrash" ,kcrash) + ("ki18n" ,ki18n) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qtbase" ,qtbase))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'check 'check-setup + (lambda _ + ;; make Qt render "offscreen", required for tests + (setenv "QT_QPA_PLATFORM" "offscreen") + #t))))) + (home-page "https://kde.org/applications/utilities/org.kde.kronometer") + (synopsis "Simple stopwatch application") + (description "Kronometer is a stopwatch application. It features the +basic stopwatch actions (pause, resume, reset, laps), as well as the ability +to save the times and resume them later.") + (license ;; GPL for programs, LGPL for libraries, FDL for documentation + license:gpl2+))) + +(define-public krusader + (package + (name "krusader") + (version "2.7.2") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/krusader/" version + "/krusader-" version ".tar.xz")) + (sha256 + (base32 "02b1jz5a7cjr13v6c7fczrhs1xmg1krnva5fxk8x2bf4nd1rm8s1")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("karchive" ,karchive) + ("kbookmarks" ,kbookmarks) + ("kcodecs" ,kcodecs) + ("kcompletion" ,kcompletion) + ("kconfig" ,kconfig) + ("kcoreaddons" ,kcoreaddons) + ("kguiaddons" ,kguiaddons) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kio" ,kio) + ("kitemviews" ,kitemviews) + ("knotifications" ,knotifications) + ("kparts" ,kparts) + ("ktextwidgets" ,ktextwidgets) + ("kwallet" ,kwallet) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qtbase" ,qtbase) + ("solid" ,solid) + ("zlib" ,zlib))) + (home-page "https://www.krusader.org") + (synopsis "Twin-panel (commander-style) file manager") + (description "Krusader is a simple, easy, yet powerful, +twin-panel (commander-style) file manager, similar to Midnight Commander or +Total Commander + +It provides all the file management features you could possibly want. Plus: +extensive archive handling, mounted filesystem support, FTP, advanced search +module, an internal viewer/editor, directory synchronisation, file content +comparisons, powerful batch renaming and much much more. It supports a wide +variety of archive formats and can handle other KIO slaves such as smb or +fish. + +Almost completely customizable, Krusader is very user friendly, fast and looks +great on your desktop.") + (license license:gpl2+))) + +(define-public okteta + (package + (name "okteta") + (version "17.12.3") + (source + (origin + (method url-fetch) + ;; TODO: Why is this not in "stable" anymore + (uri (string-append "mirror://kde/Attic/applications/" version + "/src/okteta-" version ".tar.xz")) + (sha256 + (base32 "03wsv83l1cay2dpcsksad124wzan7kh8zxdw1h0yicn398kdbck4")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools) + ("qttools" ,qttools) + ("shared-mime-info" ,shared-mime-info))) + (inputs + `(("kbookmarks" ,kbookmarks) + ("kcmutils" ,kcmutils) + ("kcodecs" ,kcodecs) + ("kcrash" ,kcrash) + ("kcompletion" ,kcompletion) + ("kconfigwidgets" ,kconfigwidgets) + ("kdbusaddons" ,kdbusaddons) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kio" ,kio) + ("knewstuff" ,knewstuff) + ("kparts" ,kparts) + ("kservice" ,kservice) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qca" ,qca) + ("qtbase" ,qtbase) + ("qtscript" ,qtscript))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'check 'check-setup + (lambda _ + ;; make Qt render "offscreen", required for tests + (setenv "QT_QPA_PLATFORM" "offscreen") + (setenv "HOME" "/tmp/dummy-home") + #t))))) + (home-page "https://kde.org/applications/utilities/org.kde.okteta") + (synopsis "Hexadecimal editor for binary files") + (description "Okteta is a simple editor for the raw data of files. This +type of program is also called hex editor or binary editor. + +The data is displayed in the traditional view with two columns: one with the +numeric values and one with the assigned characters. Editing can be done both +in the value column and the character column. Besides the usual editing +capabilities Okteta also brings a small set of tools, like a table listing +decodings into common simple data types, a table listing all possible bytes +with its character and value equivalents, a info view with a statistic and a +filter tool. All modifications to the data loaded can be endlessly undone or +redone.") + (license ;; GPL for programs, LGPL for libraries, FDL for documentation + (list license:gpl2+ license:lgpl2.0+ license:fdl1.2+)))) + +(define-public rsibreak + (package + (name "rsibreak") + (version "0.12.11") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde//stable/rsibreak/0.12/" + "rsibreak-" version ".tar.xz")) + (sha256 + (base32 "09axg6gbmpnxsk88mdjbxxvfaj5af7xaf1gmnr17b0506zcfgwhv")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kauth" ,kauth) + ("kconfig" ,kconfig) + ("kconfigwidgets" ,kconfigwidgets) + ("kcoreaddons" ,kcoreaddons) + ("kcrash" ,kcrash) + ("kdbusaddons" ,kdbusaddons) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kidletime" ,kidletime) + ("knotifications" ,knotifications) + ("knotifyconfig" ,knotifyconfig) + ("ktextwidgets" ,ktextwidgets) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qtbase" ,qtbase))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'check 'check-setup + (lambda _ + ;; make Qt render "offscreen", required for tests + (setenv "QT_QPA_PLATFORM" "offscreen") + #t))))) + (home-page "https://kde.org/applications/utilities/org.kde.rsibreak") + (synopsis "Assists in the Recovery and Prevention of Repetitive Strain +Injury") + (description "Repetitive Strain Injury is an illness which can occur as a +result of working with a mouse and keyboard. This utility can be used to +remind you to take a break now and then.") + (license ;; GPL for programs, FDL for documentation + (list license:gpl2+ license:fdl1.2+)))) + +(define-public smb4k + (package + (name "smb4k") + (version "3.0.2") + (source + (origin + (method url-fetch) + (uri (string-append "https://sourceforge.net/projects/smb4k/files/" + version "/smb4k-" version ".tar.xz/download")) + (sha256 + (base32 "1daajaj8qhxkzz8dsaracwi49z4i57466h6qnqnh2ir2l54q00ir")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kauth" ,kauth) + ("kconfig" ,kconfig) + ("kconfigwidgets" ,kconfigwidgets) + ("kcompletion" ,kcompletion) + ("kcoreaddons" ,kcoreaddons) + ("kcrash" ,kcrash) + ("kdbusaddons" ,kdbusaddons) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("kio" ,kio) + ("kjobwidgets" ,kjobwidgets) + ("knotifications" ,knotifications) + ("knotifyconfig" ,knotifyconfig) + ("ktextwidgets" ,ktextwidgets) + ("kwallet" ,kwallet) + ("kwidgetsaddons" ,kwidgetsaddons) + ("kwindowsystem" ,kwindowsystem) + ("kxmlgui" ,kxmlgui) + ("libsmbclient" ,samba) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("plasma-framework" ,plasma-framework) + ("qtbase" ,qtbase) + ("qtdeclarative" ,qtdeclarative) + ("solid" ,solid))) + (home-page "https://kde.org/applications/utilities/org.kde.smb4k") + (synopsis "Samba (SMB) share advanced browser") + (description "Smb4K is an network neighborhood browser for the KDE +Software Compilation and a frontend to the programs of the Samba software +suite. + +Features: +@itemize +@item Scanning for (active) workgroups, hosts, and shares +@item Support of the CIFS (Linux) and SMBFS (FreeBSD) file system +@item Mounting and unmounting of shares (using the KAuth framework) +@item Access to the files of a mounted share using a file manager or terminal +@item Auto-detection of external mounts and unmounts +@item Remounting of previously used shares on program start +@item Miscellaneous infos about remote network items and mounted shares +@item Network search +@item WINS server support +@item Preview of the contents of a share +@item Several methods to look up the initial list of workgroups and domains +@item Default login +@item Special handling of homes shares +@item Ability to bookmark favorite shares and organize them in groups +@item System tray widget +@item Support of advanced Samba options +@item Support of printer shares +@item KWallet support +@item Synchronization of a remote share with a local copy and vice versa +@item Ability to define custom options for individual servers and shares +@item Laptop support through the Solid hardware device framework +@end itemize") + (license license:gpl2+))) + +(define-public sweeper + (package + (name "sweeper") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/sweeper-" version ".tar.xz")) + (sha256 + (base32 "1gn87yxmhi7rs82jq7y89bvlx33xbl9wq8kr96pcz423khqvjl84")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("kdoctools" ,kdoctools))) + (inputs + `(("kactivities-stats" ,kactivities-stats) + ("kbookmarks" ,kbookmarks) + ("kcrash" ,kcrash) + ("kconfig" ,kconfig) + ("kconfigwidgets" ,kconfigwidgets) + ("kcoreaddons" ,kcoreaddons) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("ktextwidgets" ,ktextwidgets) + ("kxmlgui" ,kxmlgui) + ("oxygen-icons" ,oxygen-icons) ;; default icon set + ("qtbase" ,qtbase))) + (home-page "https://kde.org/applications/utilities/org.kde.sweeper") + (synopsis "Temporary file and history cleaner") + (description " +Sweeper helps to clean unwanted traces the user leaves on the system and to +regain disk space removing unused temporary files. +It can quickly remove temporary information, such as web page cookies, +browser history, or the list of recently-opened documents. It helps provide +additional privacy on a system shared between multiple users.") + (license license:lgpl2.0+ ))) diff --git a/gnu/packages/kde.scm b/gnu/packages/kde.scm index 24d8eedd84..44f8df387f 100644 --- a/gnu/packages/kde.scm +++ b/gnu/packages/kde.scm @@ -64,8 +64,44 @@ #:use-module (gnu packages version-control) #:use-module (gnu packages video) #:use-module (gnu packages xdisorg) + #:use-module (gnu packages xml) #:use-module (gnu packages xorg)) +(define-public grantleetheme + (package + (name "grantleetheme") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/grantleetheme-" version ".tar.xz")) + (sha256 + (base32 "0j77q1yyfmggzgkqgcw2xr0v9xg3h5cdhh8jry8h2llw75ahy6xb")) + (patches (search-patches "grantlee-merge-theme-dirs.patch")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules) + ("libxml2" ,libxml2))) ;; xmllint required for tests + (inputs + `(("grantlee" ,grantlee) + ("ki18n" ,ki18n) + ("kiconthemes" ,kiconthemes) + ("knewstuff" ,knewstuff) + ("qtbase" ,qtbase))) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-before 'check 'check-setup + (lambda _ + (setenv "QT_QPA_PLATFORM" "offscreen") + #t))))) + (home-page "https://cgit.kde.org/grantleetheme.git") + (synopsis "Library providing Grantlee theme support") + (description "This library provides Grantlee theme support.") + (license ;; LGPL for libraries, FDL for documentation + (list license:lgpl2.0+ license:fdl1.2+)))) + (define-public kdenlive (let ((version "18.08.1")) (package @@ -222,7 +258,7 @@ projects.") (arguments `(#:tests? #f ;; there are some issues with the test suite #:phases - (modify-phases (@ (guix build qt-build-system) %standard-phases) + (modify-phases %standard-phases (add-before 'configure 'add-include-path (lambda* (#:key inputs #:allow-other-keys) (substitute* "cmake/modules/FindClang.cmake" @@ -488,7 +524,7 @@ different notification systems.") `(#:configure-flags '("-DBUILD_TESTING=ON") #:tests? #f ; tests fail hard in our build environment #:phases - (modify-phases (@ (guix build qt-build-system) %standard-phases) + (modify-phases %standard-phases (add-before 'check 'check-setup (lambda _ (setenv "QT_QPA_PLATFORM" "offscreen") @@ -651,3 +687,31 @@ Python, PHP, and Perl.") (synopsis "Runtime library for kdegames") (description "Runtime library for kdegames") (license (list license:gpl2+ license:fdl1.2+)))) + +(define-public zeroconf-ioslave + (package + (name "zeroconf-ioslave") + (version "19.08.3") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://kde/stable/applications/" version + "/src/zeroconf-ioslave-" version ".tar.xz")) + (sha256 + (base32 "1vbi4kpyrk530q2dj8ql2i0gxjybdbmkqpl8vkhrihl7r7f0xc5p")))) + (build-system qt-build-system) + (native-inputs + `(("extra-cmake-modules" ,extra-cmake-modules))) + (inputs + `(("kdbusaddons" ,kdbusaddons) + ("kdnssd" ,kdnssd) + ("ki18n" ,ki18n) + ("kio" ,kio) + ("qtbase" ,qtbase))) + (home-page "https://kde.org/applications/internet/org.kde.zeroconf_ioslave") + (synopsis "DNS-SD Service Discovery Monitor") + (description "Adds an entry to Dolphin's Network page to show local +services such as printers which advertise themselves with DNSSD (called Avahi +or Bonjour by other projects).") + (license ;; GPL for programs, LGPL for libraries, FDL for documentation + (list license:gpl2+ license:lgpl2.0+ license:fdl1.2+)))) diff --git a/gnu/packages/lego.scm b/gnu/packages/lego.scm index 3203e1c9b4..396b37ddd9 100644 --- a/gnu/packages/lego.scm +++ b/gnu/packages/lego.scm @@ -1,5 +1,5 @@ ;;; GNU Guix --- Functional package management for GNU -;;; Copyright © 2016, 2017 Eric Bavier <bavier@member.fsf.org> +;;; Copyright © 2016, 2017, 2019 Eric Bavier <bavier@posteo.net> ;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. @@ -20,6 +20,7 @@ (define-module (gnu packages lego) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix download) + #:use-module (guix git-download) #:use-module (guix packages) #:use-module (guix build-system gnu) #:use-module (gnu packages) @@ -73,15 +74,16 @@ restrictions that stem from limitations of the standard RCX firmware.") (define-public leocad (package (name "leocad") - (version "18.02") + (version "19.07.1") (source (origin - (method url-fetch) - (uri (string-append "https://github.com/leozide/leocad/" - "archive/v" version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/leozide/leocad.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "189wj221fn08bnsfwy8050bxkjgjwinkn19qdcvb6c2ry2lnfra9")))) + "02kv1m18g6s4dady9jv4sjivfkrp192bmdw2a3d9lzlp60zks0p2")))) (build-system gnu-build-system) (native-inputs `(("qttools" ,qttools))) ; for lrelease diff --git a/gnu/packages/libreoffice.scm b/gnu/packages/libreoffice.scm index 4476e5a4ad..038031b800 100644 --- a/gnu/packages/libreoffice.scm +++ b/gnu/packages/libreoffice.scm @@ -174,14 +174,14 @@ spreadsheets and presentations.") (define-public libwpd (package (name "libwpd") - (version "0.10.2") + (version "0.10.3") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/libwpd/libwpd/" "libwpd-" version "/libwpd-" version ".tar.xz")) (sha256 (base32 - "0436gnidx45a9vx114hhh216jrh57mqb9zyssyjfadagmyz6hgrj")))) + "02fx8bngslcj7i5g1gx2kiign4vp09wrmp5wpvix9igxcavb0r94")))) (build-system gnu-build-system) (arguments `(#:configure-flags '("--disable-werror"))) @@ -929,7 +929,7 @@ converting QuarkXPress file format. It supports versions 3.1 to 4.1.") (define-public libreoffice (package (name "libreoffice") - (version "6.3.3.2") + (version "6.3.4.2") (source (origin (method url-fetch) @@ -939,7 +939,7 @@ converting QuarkXPress file format. It supports versions 3.1 to 4.1.") (version-prefix version 3) "/libreoffice-" version ".tar.xz")) (sha256 (base32 - "1kz5950vhjc33rx7pyl5sw9lxxm90hxrj7v8y86jy34skjrfa3nl")) + "1774vmf3lr5x24ikpn1z5vqcdwrhiwfkjy7sx09jqkvpm6d5awnb")) (patches (search-patches "libreoffice-icu.patch" "libreoffice-glm.patch")) (modules '((guix build utils))) diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm index 3cec941db2..9977be6bfe 100644 --- a/gnu/packages/linux.scm +++ b/gnu/packages/linux.scm @@ -186,33 +186,33 @@ defconfig. Return the appropriate make target if applicable, otherwise return "deblob-check")) (sha256 deblob-check-hash)))) -(define deblob-scripts-5.3 +(define deblob-scripts-5.4 (linux-libre-deblob-scripts - "5.3.11" - (base32 "15n09zq38d69y1wl28s3nasf3377qp2yil5b887zpqrm00dif7i4") - (base32 "1xk3gzgnl9m29avka32zkggl36sdxyvps40hr12hjy42l1ysfshm"))) + "5.4.4" + (base32 "0ckxn7k5zgcqk30dq943bnamr6a6zjbw2aqjl3x30f4kvh5f6k25") + (base32 "09hy3jqb8lny861pxjbjvzg90imi8p7z10j14xp0rclxmyb81rk3"))) (define deblob-scripts-4.19 (linux-libre-deblob-scripts - "4.19.84" + "4.19.90" (base32 "02zs405awaxydbapka4nz8h6lmnc0dahgczqsrs5s2bmzjyyqkcy") - (base32 "1s89hmy4ihd65by2p1xxkxj476f6c9s5g9r9yvqncb50xlhilk50"))) + (base32 "0xpcl6pd1280gm81bivz45dfhy6v16j0hghxhjynmcbasgnx8vpd"))) (define deblob-scripts-4.14 (linux-libre-deblob-scripts - "4.14.154" + "4.14.159" (base32 "091jk9jkn9jf39bxpc7395bhcb7p96nkg3a8047380ki06lnfxh6") - (base32 "1pcsfzpcv3bs30iyhwpk1x64r0gyv7wi22spnq6avzj1ayva10kw"))) + (base32 "0yd0c3qxk5rm686j4kd5v4zppjj3k9ivqnv46z4p3xh1gqmhv7cz"))) (define deblob-scripts-4.9 (linux-libre-deblob-scripts - "4.9.201" + "4.9.206" (base32 "1wvldzlv7q2xdbadas87dh593nxr4a8p5n0f8zpm72lja6w18hmg") (base32 "0is8gn4qdd7h5l6lacvhqdch26lmrbgxfm8ab7fx8n85ha7y358w"))) (define deblob-scripts-4.4 (linux-libre-deblob-scripts - "4.4.201" + "4.4.206" (base32 "0x2j1i88am54ih2mk7gyl79g25l9zz4r08xhl482l3fvjj2irwbw") (base32 "12ac4g3ky8yma8sylmxvvysqvd4hnaqjiwmxrxb6wlxggfd7zkbx"))) @@ -356,42 +356,42 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." "linux-" version ".tar.xz")) (sha256 hash))) -(define-public linux-libre-5.3-version "5.3.15") -(define-public linux-libre-5.3-pristine-source - (let ((version linux-libre-5.3-version) - (hash (base32 "15qidl06lyfylx1b43b4wz2zfkr4000bkr7ialslmb7yi7mamj6f"))) +(define-public linux-libre-5.4-version "5.4.6") +(define-public linux-libre-5.4-pristine-source + (let ((version linux-libre-5.4-version) + (hash (base32 "1j4916izy2nrzq7g6m5m365r60hhhx9rqcanjvaxv5x3vsy639gx"))) (make-linux-libre-source version (%upstream-linux-source version hash) - deblob-scripts-5.3))) + deblob-scripts-5.4))) -(define-public linux-libre-4.19-version "4.19.88") +(define-public linux-libre-4.19-version "4.19.91") (define-public linux-libre-4.19-pristine-source (let ((version linux-libre-4.19-version) - (hash (base32 "1gizkdmq46ykw7ya3hibd6lalww2kvsia346pq3xvrk6s5mkp4n1"))) + (hash (base32 "0irl5jlh5rrdfz5g28x4ifbillvspwd8fy4wi3qhmv9dw7gc60zl"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.19))) -(define-public linux-libre-4.14-version "4.14.158") +(define-public linux-libre-4.14-version "4.14.160") (define-public linux-libre-4.14-pristine-source (let ((version linux-libre-4.14-version) - (hash (base32 "1cqvr8pgqx005a9qyphqykakzwc54adq8mmdc9sgrxkkw9rfqj8d"))) + (hash (base32 "0b59xyr8if0qcbnwqa88y275g9rzhjbbp8589i8xxpmws6x2c0y6"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.14))) -(define-public linux-libre-4.9-version "4.9.206") +(define-public linux-libre-4.9-version "4.9.207") (define-public linux-libre-4.9-pristine-source (let ((version linux-libre-4.9-version) - (hash (base32 "1mnabj0d5ra40hijwynnzxnh5w1qnvkvj2l3ydsdhkdwm6cpiwhx"))) + (hash (base32 "090181vij95py22jhx7baaxabb78w0j5hsfsnzp6bv2vgdz671na"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.9))) -(define-public linux-libre-4.4-version "4.4.206") +(define-public linux-libre-4.4-version "4.4.207") (define-public linux-libre-4.4-pristine-source (let ((version linux-libre-4.4-version) - (hash (base32 "14ylg9cm7z12mvkzg8z92gsw0libw9xz392ayzw0d9cgw1py39ax"))) + (hash (base32 "024flajnl3l4yk8sgqdrfrl21js4vsjcv4ivmjblj4l9fl3hdjb6"))) (make-linux-libre-source version (%upstream-linux-source version hash) deblob-scripts-4.4))) @@ -424,10 +424,9 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (patches (append (origin-patches source) patches)))) -(define-public linux-libre-5.3-source - (source-with-patches linux-libre-5.3-pristine-source - (list (search-patch "linux-libre-active-entropy.patch") - %boot-logo-patch +(define-public linux-libre-5.4-source + (source-with-patches linux-libre-5.4-pristine-source + (list %boot-logo-patch %linux-libre-arm-export-__sync_icache_dcache-patch))) (define-public linux-libre-4.19-source @@ -520,9 +519,9 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS." (description "Headers of the Linux-Libre kernel.") (license license:gpl2))) -(define-public linux-libre-headers-5.3 - (make-linux-libre-headers* linux-libre-5.3-version - linux-libre-5.3-source)) +(define-public linux-libre-headers-5.4 + (make-linux-libre-headers* linux-libre-5.4-version + linux-libre-5.4-source)) (define-public linux-libre-headers-4.19 (make-linux-libre-headers* linux-libre-4.19-version @@ -777,16 +776,16 @@ It has been modified to remove all non-free binary blobs.") ;;; Generic kernel packages. ;;; -(define-public linux-libre-5.3 - (make-linux-libre* linux-libre-5.3-version - linux-libre-5.3-source +(define-public linux-libre-5.4 + (make-linux-libre* linux-libre-5.4-version + linux-libre-5.4-source '("x86_64-linux" "i686-linux" "armhf-linux" "aarch64-linux") #:configuration-file kernel-config)) -(define-public linux-libre-version linux-libre-5.3-version) -(define-public linux-libre-pristine-source linux-libre-5.3-pristine-source) -(define-public linux-libre-source linux-libre-5.3-source) -(define-public linux-libre linux-libre-5.3) +(define-public linux-libre-version linux-libre-5.4-version) +(define-public linux-libre-pristine-source linux-libre-5.4-pristine-source) +(define-public linux-libre-source linux-libre-5.4-source) +(define-public linux-libre linux-libre-5.4) (define-public linux-libre-4.19 (make-linux-libre* linux-libre-4.19-version @@ -1688,7 +1687,7 @@ external rate conversion.") (define-public iptables (package (name "iptables") - (version "1.6.2") + (version "1.8.4") (source (origin (method url-fetch) (uri (string-append @@ -1696,7 +1695,7 @@ external rate conversion.") version ".tar.bz2")) (sha256 (base32 - "0crp0lvh5m2f15pr8cw97h8yb8zjj10x95zj06j46cr68vx2vl2m")))) + "0z0mgs1ghvn3slc868mgbf2g26njgrzcy5ggyb5w4i55j1a3lflr")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config) @@ -3998,7 +3997,7 @@ and copy/paste text in the console and in xterm.") (define-public btrfs-progs (package (name "btrfs-progs") - (version "5.3.1") + (version "5.4") (source (origin (method url-fetch) (uri (string-append "mirror://kernel.org/linux/kernel/" @@ -4006,7 +4005,7 @@ and copy/paste text in the console and in xterm.") "btrfs-progs-v" version ".tar.xz")) (sha256 (base32 - "0f6s1iwiqbncrvxp74k50s88x6zqf85sjxg04kyni82l1vk1m8xz")))) + "1ykhasv0jc3qi3xrm5841mzkmlbkjw6rm70gl4aww90jj6ak55qg")))) (build-system gnu-build-system) (outputs '("out" "static")) ; static versions of the binaries in "out" @@ -4576,6 +4575,7 @@ from that to the system kernel's @file{/dev/random} machinery.") #:make-flags (let ((out (assoc-ref %outputs "out"))) (list (string-append "DESTDIR=" out) (string-append "LDFLAGS=-Wl,-rpath=" out "/lib") + "libdir=/lib" "docdir=/share/doc/cpupower" "confdir=$(docdir)/examples" ;; The Makefile recommends the following changes @@ -5314,14 +5314,16 @@ re-use code and to avoid re-inventing the wheel.") (define-public libnftnl (package (name "libnftnl") - (version "1.1.4") + (version "1.1.5") (source (origin (method url-fetch) (uri (string-append "mirror://netfilter.org/libnftnl/" "libnftnl-" version ".tar.bz2")) (sha256 - (base32 "087dfc2n4saf2k68hyi4byvgz5grwpw5kfjvmkpn3wmd8y1riiy8")))) + (base32 "1wqlxf76bkqf3qhka9sw32qhb2ni20q1k6rn3iril2kw482lvpk6")) + (patches + (search-patches "libnftnl-dont-check-NFTNL_FLOWTABLE_SIZE.patch")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) @@ -5338,15 +5340,16 @@ used by nftables.") (define-public nftables (package (name "nftables") - (version "0.9.2") + (version "0.9.3") (source (origin (method url-fetch) - (uri (string-append "http://www.nftables.org/projects/nftables" - "/files/nftables-" version ".tar.bz2")) + (uri (list (string-append "mirror://netfilter.org/nftables/nftables-" + version ".tar.bz2") + (string-append "https://www.nftables.org/projects/nftables" + "/files/nftables-" version ".tar.bz2"))) (sha256 - (base32 - "1x8kalbggjq44j4916i6vyv1rb20dlh1dcsf9xvzqsry2j063djw")))) + (base32 "0y6vbqp6x8w165q65h4n9sba1406gaz0d4744gqszbm7w9f92swm")))) (build-system gnu-build-system) (arguments `(#:configure-flags '("--disable-man-doc"))) ; FIXME: Needs docbook2x. @@ -5357,7 +5360,7 @@ used by nftables.") ("libnftnl" ,libnftnl) ("readline" ,readline))) (native-inputs `(("pkg-config" ,pkg-config))) - (home-page "http://www.nftables.org") + (home-page "https://www.nftables.org") (synopsis "Userspace utility for Linux packet filtering") (description "nftables is the project that aims to replace the existing {ip,ip6,arp,eb}tables framework. Basically, this project provides a new packet diff --git a/gnu/packages/lisp-xyz.scm b/gnu/packages/lisp-xyz.scm index a798eb156e..3589640653 100644 --- a/gnu/packages/lisp-xyz.scm +++ b/gnu/packages/lisp-xyz.scm @@ -15,6 +15,7 @@ ;;; Copyright © 2019 Katherine Cox-Buday <cox.katherine.e@gmail.com> ;;; Copyright © 2019 Jesse Gildersleve <jessejohngildersleve@protonmail.com> ;;; Copyright © 2019 Guillaume Le Vaillant <glv@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -6651,8 +6652,8 @@ threads.") ((#:tests? _ #f) #f)))))) (define-public sbcl-cl-store - (let ((commit "cd01f2610d3360dc01ab972bd9317407aaea7745") - (revision "0")) + (let ((commit "c787337a16ea8cf8a06227f35933a4ec774746b3") + (revision "1")) (package (name "sbcl-cl-store") (version (git-version "0.8.11" revision commit)) @@ -6665,7 +6666,7 @@ threads.") (file-name (git-file-name name version)) (sha256 (base32 - "05b7kh5af2ax7vlmphpac4vbqr84j5ivppj96qzb64fxpjpqglm4")))) + "194srkg8nrym19c6i7zbnkzshc1qhqa82m53qnkirz9fw928bqxr")))) (build-system asdf-build-system/sbcl) (native-inputs `(("rt" ,sbcl-rt))) @@ -6673,7 +6674,7 @@ threads.") (description "CL-STORE is a portable serialization package which should give you the ability to store all Common Lisp data types into streams.") - (home-page "http://www.common-lisp.net/project/cl-store/") + (home-page "https://www.common-lisp.net/project/cl-store/") (license license:expat)))) (define-public cl-store diff --git a/gnu/packages/lisp.scm b/gnu/packages/lisp.scm index d51b9a3662..a3ac957f63 100644 --- a/gnu/packages/lisp.scm +++ b/gnu/packages/lisp.scm @@ -74,6 +74,7 @@ #:use-module (gnu packages texinfo) #:use-module (gnu packages version-control) #:use-module (gnu packages xorg) + #:use-module (srfi srfi-1) #:use-module (ice-9 match)) (define (asdf-substitutions lisp) @@ -318,9 +319,9 @@ high-level, object-oriented functional programming language. CLISP includes an interpreter, a compiler, a debugger, and much more.") (license license:gpl2+))) -(define-public sbcl +(define sbcl-boot0 (package - (name "sbcl") + (name "sbcl-boot0") (version "1.5.8") (source (origin @@ -357,13 +358,8 @@ an interpreter, a compiler, a debugger, and much more.") ;; 2019-09-05, ECL was last updated in 2016 while CLISP was last updated ;; in 2010. ;; - ;; For now we stick to CLISP for all systems. We keep the `match' here to - ;; make it easier to change the host compiler for various architectures. - `(,@(match (%current-system) - ((or "x86_64-linux" "i686-linux") - `(("clisp" ,clisp))) - (_ - `(("clisp" ,clisp)))) + ;; For now we stick to CLISP for all systems. + `(("clisp" ,clisp) ("which" ,which) ("inetutils" ,inetutils) ;for hostname(1) ("ed" ,ed) @@ -431,11 +427,7 @@ an interpreter, a compiler, a debugger, and much more.") (replace 'build (lambda* (#:key outputs #:allow-other-keys) (setenv "CC" "gcc") - (invoke "sh" "make.sh" ,@(match (%current-system) - ((or "x86_64-linux" "i686-linux") - `("clisp")) - (_ - `("clisp"))) + (invoke "sh" "make.sh" "clisp" (string-append "--prefix=" (assoc-ref outputs "out")) "--with-sb-core-compression" @@ -493,6 +485,46 @@ statistical profiler, a code coverage tool, and many other extensions.") (license (list license:public-domain license:bsd-2 (license:x11-style "file://src/code/loop.lisp"))))) +(define-public sbcl + ;; Since 1.5.9, SBCL requires itself to build. + ;; See https://bugs.launchpad.net/sbcl/+bug/1855272. + (package + (inherit sbcl-boot0) + (name "sbcl") + (version "1.5.9") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/sbcl/sbcl/" version "/sbcl-" + version "-source.tar.bz2")) + (sha256 + (base32 "1dmrlklil7x3j68mwmjfpd71vkphr24s4rx6d61jpc54x0jhvnyb")) + (modules '((guix build utils))) + (snippet + ;; Add sbcl-bundle-systems to 'default-system-source-registry'. + `(begin + (substitute* "contrib/asdf/asdf.lisp" + ,@(asdf-substitutions name)) + #t)))) + (build-system gnu-build-system) + (outputs '("out" "doc")) + (native-inputs + `(("sbcl" ,sbcl-boot0) + ,@(fold alist-delete (package-native-inputs sbcl-boot0) + '("clisp")))) + (arguments + (substitute-keyword-arguments (package-arguments sbcl-boot0) + ((#:phases phases) + `(modify-phases ,phases + (replace 'build + (lambda* (#:key outputs #:allow-other-keys) + (setenv "CC" "gcc") + (invoke "sh" "make.sh" "sbcl" + (string-append "--prefix=" + (assoc-ref outputs "out")) + "--with-sb-core-compression" + "--with-sb-xref-for-internals"))))))))) + (define-public ccl ;; Warning: according to upstream, CCL is not bootstrappable. ;; See https://github.com/Clozure/ccl/issues/222 from 2019-09-02: @@ -741,7 +773,7 @@ enough to play the original mainframe Zork all the way through.") (define-public txr (package (name "txr") - (version "224") + (version "230") (source (origin (method git-fetch) @@ -752,7 +784,7 @@ enough to play the original mainframe Zork all the way through.") (patches (search-patches "txr-shell.patch")) (sha256 (base32 - "1036k71f6mffy9rjwzmhr5nnp1n0wzb0rqvilpzvb8jc5yxv0810")))) + "1ma6nbqsnl4f8ndh47zzc8n5vzcny66v0z3ndddgm3g0bqaxzjzm")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("cc=gcc") diff --git a/gnu/packages/llvm.scm b/gnu/packages/llvm.scm index e09b7f016e..ae5fe72d93 100644 --- a/gnu/packages/llvm.scm +++ b/gnu/packages/llvm.scm @@ -13,6 +13,7 @@ ;;; Copyright © 2019 Rutger Helling <rhelling@mykolab.com> ;;; Copyright © 2019 Arm Ltd <David.Truby@arm.com> ;;; Copyright © 2019 Mathieu Othacehe <m.othacehe@gmail.com> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -699,15 +700,19 @@ with that of libgomp, the GNU Offloading and Multi Processing Library.") (define-public python-llvmlite (package (name "python-llvmlite") - (version "0.27.1") + (version "0.30.0") (source (origin (method url-fetch) (uri (pypi-uri "llvmlite" version)) (sha256 (base32 - "1aq003zbyjnz4q1118h6qx5lfimc8s5fvgskl75j12gxd6pc78a8")))) + "01wspdc0xhnydl66jyhyr4ii16h3fnw6mjihiwnnxdxg9j6kkajf")))) (build-system python-build-system) + (arguments + ;; FIXME: One test fails unable to find libm.so + ;; https://github.com/numba/llvmlite/issues/537 + `(#:tests? #f)) (inputs `(("llvm" ,(package diff --git a/gnu/packages/lxde.scm b/gnu/packages/lxde.scm index cc5e090f58..5c5e70ff56 100644 --- a/gnu/packages/lxde.scm +++ b/gnu/packages/lxde.scm @@ -142,16 +142,16 @@ or external monitor.") (define-public lxtask (package (name "lxtask") - (version "0.1.7") + (version "0.1.9") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/lxde/LXTask" "%20%28task%20manager%29/LXTask%20" (version-major+minor version) ".x/" - name "-" version ".tar.xz")) + "lxtask-" version ".tar.xz")) (sha256 (base32 - "1zihhvzsg9bl6k0gv7jwx6cgsi3rmcagvnmshc1h0mjq2immmdph")))) + "0cv4hx5dg01hbyi5p10pl78n0a40xajpq4wx9c7886pkmpq8isj1")))) (build-system gnu-build-system) (inputs `(("gtk+" ,gtk+-2))) (native-inputs `(("intltool" ,intltool) diff --git a/gnu/packages/machine-learning.scm b/gnu/packages/machine-learning.scm index d7df30e751..719401d69a 100644 --- a/gnu/packages/machine-learning.scm +++ b/gnu/packages/machine-learning.scm @@ -12,6 +12,7 @@ ;;; Copyright © 2018 Björn Höfling <bjoern.hoefling@bjoernhoefling.de> ;;; Copyright © 2019 Nicolas Goaziou <mail@nicolasgoaziou.fr> ;;; Copyright © 2019 Guillaume Le Vaillant <glv@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -2088,3 +2089,31 @@ number of collective algorithms useful for machine learning applications. These include a barrier, broadcast, and allreduce.") (home-page "https://github.com/facebookincubator/gloo") (license license:bsd-3)))) + +(define-public python-umap-learn + (package + (name "python-umap-learn") + (version "0.3.10") + (source + (origin + (method url-fetch) + (uri (pypi-uri "umap-learn" version)) + (sha256 + (base32 + "02ada2yy6km6zgk2836kg1c97yrcpalvan34p8c57446finnpki1")))) + (build-system python-build-system) + (native-inputs + `(("python-nose" ,python-nose))) + (propagated-inputs + `(("python-numba" ,python-numba) + ("python-numpy" ,python-numpy) + ("python-scikit-learn" ,python-scikit-learn) + ("python-scipy" ,python-scipy))) + (home-page "https://github.com/lmcinnes/umap") + (synopsis + "Uniform Manifold Approximation and Projection") + (description + "Uniform Manifold Approximation and Projection is a dimension reduction +technique that can be used for visualisation similarly to t-SNE, but also for +general non-linear dimension reduction.") + (license license:bsd-3))) diff --git a/gnu/packages/mail.scm b/gnu/packages/mail.scm index 555fe70de4..57cc8eb9b1 100644 --- a/gnu/packages/mail.scm +++ b/gnu/packages/mail.scm @@ -363,14 +363,17 @@ aliasing facilities to work just as they would on normal mail.") (define-public mutt (package (name "mutt") - (version "1.12.2") + (version "1.13.2") (source (origin (method url-fetch) - (uri (string-append "https://bitbucket.org/mutt/mutt/downloads/" - "mutt-" version ".tar.gz")) + (uri (list + (string-append "ftp://ftp.mutt.org/pub/mutt/mutt-" + version ".tar.gz") + (string-append "https://bitbucket.org/mutt/mutt/downloads/" + "mutt-" version ".tar.gz"))) (sha256 (base32 - "10k8352s0z7yan6d4z2am80qd3bsaky4h89g72wl4xr3x067ahmw")) + "0x4yfvk8415p80h9an242n6q3b43mw6mnnczh95zd3j0zwdr6wrg")) (patches (search-patches "mutt-store-references.patch")))) (build-system gnu-build-system) (inputs @@ -496,7 +499,7 @@ It adds a large amount of new and improved features to mutt.") (define-public gmime (package (name "gmime") - (version "3.2.4") + (version "3.2.5") (source (origin (method url-fetch) (uri (string-append "mirror://gnome/sources/gmime/" @@ -504,7 +507,7 @@ It adds a large amount of new and improved features to mutt.") "/gmime-" version ".tar.xz")) (sha256 (base32 - "096hh4g6z343kncw9svcrzv05d41n4v2q5k9jsm6gc40w30ag7i4")))) + "0ndsg1z1kq4w4caascydvialpyn4rfbjdn7xclzbzhw53x85cxgv")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config) @@ -555,15 +558,14 @@ Extension (MIME).") (define-public bogofilter (package (name "bogofilter") - (version "1.2.4") - (source (origin - (method url-fetch) - (uri (string-append "mirror://sourceforge/bogofilter/bogofilter-" - version "/bogofilter-" - version ".tar.bz2")) - (sha256 - (base32 - "1d56n2m9inm8gnzm88aa27xl2a7sp7aff3484vmflpqkinjqf0p1")))) + (version "1.2.5") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/bogofilter/bogofilter-stable/" + "bogofilter-" version ".tar.xz")) + (sha256 + (base32 "1sl9xrnnlk2sn8gmibhn8li09vnansjbxb9l1182qmgz7cvs2j1j")))) (build-system gnu-build-system) (arguments '(#:phases @@ -576,14 +578,14 @@ Extension (MIME).") #t))))) (native-inputs `(("flex" ,flex))) (inputs `(("bdb" ,bdb))) - (home-page "http://bogofilter.sourceforge.net/") + (home-page "https://bogofilter.sourceforge.io/") (synopsis "Mail classifier based on a Bayesian filter") (description "Bogofilter is a mail filter that classifies mail as spam or ham (non-spam) by a statistical analysis of the message's header and content (body). The program is able to learn from the user's classifications and corrections. It is based on a Bayesian filter.") - (license gpl2))) + (license gpl3+))) (define-public offlineimap (package @@ -766,6 +768,63 @@ messages you need; in addition, it allows you to view messages, extract attachments, create new maildirs, and so on.") (license gpl3+))) +(define mumimu + ;; This is a fork of mu for use in Mumi that stores message bug IDs in its + ;; database. It also renames the library to "mumimu" to avoid confusion. + (let ((commit "ad30b5e9c85f0465aeeeac461d8c32d95775d450") + (revision "1")) + (package + (inherit mu) + (name "mumimu") + ;; TODO The version here used to be (package-version guile-email), but + ;; that code caused problems + (version (git-version "0.2.2" revision commit)) + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://git.elephly.net/software/mumimu.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1y8r8csvkyxncgpi469dir4n4sga4z9xdzc18qh5s8bk29qj689n")))) + (arguments + (substitute-keyword-arguments (package-arguments mu) + ((#:tests? anything '()) + #f) + ((#:phases phases) + `(modify-phases ,phases + (replace 'patch-configure + (lambda _ + (delete-file "autogen.sh") + (substitute* "configure.ac" + ;; Use latest Guile + (("guile-2.0") "guile-2.2")) + (substitute* '("guile/Makefile.am" + "guile/mu/Makefile.am") + (("share/guile/site/2.0/") "share/guile/site/2.2/")) + #t)) + (replace 'fix-ffi + (lambda* (#:key outputs #:allow-other-keys) + (substitute* "guile/mumimu.scm" + (("\"libguile-mu\"") + (format #f "\"~a/lib/libguile-mumimu\"" + (assoc-ref outputs "out")))) + #t)) + (delete 'install-emacs-autoloads))) + ((#:configure-flags flags) + '("--disable-gtk" + "--disable-webkit" + "--disable-mu4e")))) + (native-inputs + `(("pkg-config" ,pkg-config) + ("autoconf" ,autoconf) + ("automake" ,automake) + ("libtool" ,libtool) + ("glib" ,glib "bin") + ("tzdata" ,tzdata-for-tests) + ("texinfo" ,texinfo)))))) + (define-public alot (package (name "alot") @@ -1028,7 +1087,7 @@ useful features.") (define-public libetpan (package (name "libetpan") - (version "1.9.3") + (version "1.9.4") (source (origin (method git-fetch) (uri (git-reference @@ -1036,7 +1095,7 @@ useful features.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 "19g4qskg71jv7sxfxsdkjmrxk9mk5kf9b6fhw06g6wvm3205n95f")))) + (base32 "0g7an003simfdn7ihg9yjv7hl2czsmjsndjrp39i7cad8icixscn")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf-wrapper) ("automake" ,automake) @@ -1155,14 +1214,14 @@ which can add many functionalities to the base client.") (define-public msmtp (package (name "msmtp") - (version "1.8.6") + (version "1.8.7") (source (origin (method url-fetch) (uri (string-append "https://marlam.de/msmtp/releases/" "/msmtp-" version ".tar.xz")) (sha256 - (base32 "1qa260xrm0fzlwxpjvgvq39m4dfkskjlyb7m4y2vlr8c8d3z29b6")))) + (base32 "1waiiksa57byb7gvx1zmh6srvl6r8rvwqklk0slb3iaf4kfbqlws")))) (build-system gnu-build-system) (inputs `(("libsecret" ,libsecret) @@ -1290,7 +1349,7 @@ facilities for checking incoming mail.") (define-public dovecot (package (name "dovecot") - (version "2.3.8") + (version "2.3.9.2") (source (origin (method url-fetch) @@ -1298,7 +1357,7 @@ facilities for checking incoming mail.") (version-major+minor version) "/" "dovecot-" version ".tar.gz")) (sha256 - (base32 "0jdng27hqqagjy6v7ymd0xflbv5dbc1rhh450nk39ar6pw1qsxy5")))) + (base32 "1yc6hi4hqg4hcc4495sf4m5f1lnargphi6dawj43if21vncgp127")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) @@ -1629,14 +1688,14 @@ header.") (define-public perl-email-sender (package (name "perl-email-sender") - (version "1.300033") + (version "1.300034") (source (origin (method url-fetch) (uri (string-append "mirror://cpan/authors/id/R/RJ/RJBS/" "Email-Sender-" version ".tar.gz")) (sha256 - (base32 "1flbnzyng4g0h1aksbsip1qa6sawgfihvblspqc0xsis8g9vcza7")))) + (base32 "14aj9kqa9dr2bdhzn2qvjj2mffj8wjb5397z8qw7qg057fk3ib05")))) (build-system perl-build-system) (native-inputs `(("perl-capture-tiny" ,perl-capture-tiny))) @@ -2803,15 +2862,14 @@ killed threads.") (define-public pan (package (name "pan") - (version "0.145") + (version "0.146") (source (origin (method url-fetch) (uri (string-append "http://pan.rebelbase.com/download/releases/" version "/source/" name "-" version ".tar.bz2")) (sha256 - (base32 - "1b4wamv33hprghcjk903bpvnd233yxyrm18qnh13alc8h1553nk8")))) + (base32 "17agd27sn4a7nahvkpg0w39kv74njgdrrygs74bbvpaj8rk2hb55")))) (arguments `(#:configure-flags '("--with-gtk3" "--with-gtkspell" "--with-gnutls" "--enable-libnotify" "--enable-manual" @@ -2947,17 +3005,50 @@ replacement for the @code{urlview} program.") (file-name (git-file-name name version)) (sha256 (base32 - "1575gn5p086sjxz5hvg6iyskq6cxf6vf50s9nsc4xgrbcqa3pv2c")))) + "1575gn5p086sjxz5hvg6iyskq6cxf6vf50s9nsc4xgrbcqa3pv2c")) + (modules '((guix build utils))) + (snippet + '(begin + (substitute* "Makefile.am" + ;; Install .go files to $prefix/lib instead of + ;; $prefix/share. + (("^godir[[:space:]]*=.*") + "godir = \ +$(libdir)/guile/@GUILE_EFFECTIVE_VERSION@/site-ccache\n") + + ;; Install assets. + (("^assetsdir.*" _) + "\ +assetsdir = $(pkgdatadir)/assets +assetscssdir = $(assetsdir)/css +assetsimgdir = $(assetsdir)/img +assetsjsdir = $(assetsdir)/js + +assetscss_DATA = $(wildcard assets/css/*) +assetsimg_DATA = $(wildcard assets/img/*) +assetsjs_DATA = $(wildcard assets/js/*)\n")) + #t)))) (build-system gnu-build-system) (arguments - `(#:phases + `(#:modules ((guix build gnu-build-system) + ((guix build guile-build-system) + #:select (target-guile-effective-version)) + (guix build utils)) + #:imported-modules ((guix build guile-build-system) + ,@%gnu-build-system-modules) + + #:configure-flags '("--localstatedir=/var") + + #:phases (modify-phases %standard-phases (add-after 'install 'wrap-executable (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) - (scm (string-append out "/share/guile/site/2.2")) - (go (string-append out "/lib/guile/2.2/site-ccache"))) + (version (target-guile-effective-version)) + (scm (string-append out "/share/guile/site/" version)) + (go (string-append out "/lib/guile/" version + "/site-ccache"))) (wrap-program (string-append bin "/mumi") `("GUILE_LOAD_PATH" ":" prefix (,scm ,(getenv "GUILE_LOAD_PATH"))) @@ -2970,7 +3061,9 @@ replacement for the @code{urlview} program.") ("guile-fibers" ,guile-fibers) ("guile-json" ,guile-json-1) ("guile-syntax-highlight" ,guile-syntax-highlight) - ("guile" ,guile-2.2))) + ("gnutls" ,gnutls) ;needed to talk to https://debbugs.gnu.org + ("guile" ,guile-2.2) + ("mumimu" ,mumimu))) ;'mumimu' executable recorded in (mumi config) (native-inputs `(("autoconf" ,autoconf) ("automake" ,automake) diff --git a/gnu/packages/maths.scm b/gnu/packages/maths.scm index 8e2149d7d5..930fe916a7 100644 --- a/gnu/packages/maths.scm +++ b/gnu/packages/maths.scm @@ -924,7 +924,7 @@ extremely large and complex data collections.") (define-public hdf5-1.10 (package (inherit hdf5) - (version "1.10.4") + (version "1.10.5") (source (origin (method url-fetch) @@ -938,9 +938,8 @@ extremely large and complex data collections.") (take (string-split version #\.) 2)) "/src/hdf5-" version ".tar.bz2"))) (sha256 - (base32 "1pr85fa1sh2ky6ai2hs3f21lp252grl2cq3wbyi4rh7dm83gyrqj")) - (patches (search-patches "hdf5-config-date.patch" - "hdf5-mpi-deprecations.patch")))))) + (base32 "0i3g6v521vigzbx8wpd32ibsiiw92r65ca3qdbn0d8fj8f4fmmk8")) + (patches (search-patches "hdf5-config-date.patch")))))) (define-public hdf-java (package diff --git a/gnu/packages/maven.scm b/gnu/packages/maven.scm index 592cc74f2d..c18850bb26 100644 --- a/gnu/packages/maven.scm +++ b/gnu/packages/maven.scm @@ -1,6 +1,6 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2018 Julien Lepiller <julien@lepiller.eu> -;;; Copyright © 2019 Tobias Geerinckx-Rite <me@tobias.gr> +;;; Copyright © 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2019 Björn Höfling <bjoern.hoefling@bjoernhoefling.de> ;;; ;;; This file is part of GNU Guix. diff --git a/gnu/packages/messaging.scm b/gnu/packages/messaging.scm index 6990d85a21..75f611a2e0 100644 --- a/gnu/packages/messaging.scm +++ b/gnu/packages/messaging.scm @@ -16,7 +16,7 @@ ;;; Copyright © 2018 Leo Famulari <leo@famulari.name> ;;; Copyright © 2018 Pierre-Antoine Rouby <contact@parouby.fr> ;;; Copyright © 2019 Tanguy Le Carrour <tanguy@bioneland.org> -;;; Copyright © 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2019 Timotej Lazar <timotej.lazar@araneo.si> ;;; ;;; This file is part of GNU Guix. diff --git a/gnu/packages/mp3.scm b/gnu/packages/mp3.scm index 45bb6d7d48..695a01a297 100644 --- a/gnu/packages/mp3.scm +++ b/gnu/packages/mp3.scm @@ -6,6 +6,7 @@ ;;; Copyright © 2017 Thomas Danckaert <post@thomasdanckaert.be> ;;; Copyright © 2017, 2019 Pierre Langlois <pierre.langlois@gmx.com> ;;; Copyright © 2018, 2019 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2019 Ricardo Wurmus <rekado@elephly.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -30,6 +31,7 @@ #:use-module (gnu packages gcc) #:use-module (gnu packages boost) #:use-module (gnu packages cdrom) + #:use-module (gnu packages check) #:use-module (gnu packages compression) #:use-module (gnu packages gettext) #:use-module (gnu packages ghostscript) @@ -39,6 +41,7 @@ #:use-module (gnu packages pcre) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) + #:use-module (gnu packages python-web) #:use-module (gnu packages python-xyz) #:use-module (gnu packages xiph) #:use-module (gnu packages pulseaudio) @@ -526,3 +529,49 @@ command-line tool.") fingerprints which are used by the Acoustid service. Its main purpose is to provide an accurate identifier for record tracks.") (license license:lgpl2.1+))) + +(define-public python-audioread + (package + (name "python-audioread") + (version "2.1.8") + (source + (origin + (method url-fetch) + (uri (pypi-uri "audioread" version)) + (sha256 + (base32 + "0s6iilb8ca6j6nv5a5hbyxi5alr3crvsbr6kggh82a44pkx08f87")))) + (build-system python-build-system) + (arguments `(#:tests? #f)) ; there is no "audiofile" fixture + (native-inputs + `(("python-pytest" ,python-pytest) + ("python-pytest-runner" ,python-pytest-runner))) + (home-page "https://github.com/sampsyo/audioread") + (synopsis "Decode audio files using whichever backend is available") + (description + "This package provides a Python library for audo decoding. It uses +whatever audio backend is available, such as GStreamer, Core Audio, MAD, +FFmpeg, etc.") + (license license:expat))) + +(define-public python-pyacoustid + (package + (name "python-pyacoustid") + (version "1.1.7") + (source + (origin + (method url-fetch) + (uri (pypi-uri "pyacoustid" version)) + (sha256 + (base32 + "1zan6c22ca6sjy0g9ajwjp6mkzw7jv8r3n7jzska09a6x254lf87")))) + (build-system python-build-system) + (propagated-inputs + `(("python-audioread" ,python-audioread) + ("python-requests" ,python-requests))) + (home-page "https://github.com/sampsyo/pyacoustid") + (synopsis "Bindings for Chromaprint acoustic fingerprinting") + (description + "This package provides bindings for the Chromaprint acoustic +fingerprinting library and the Acoustid API.") + (license license:expat))) diff --git a/gnu/packages/mpd.scm b/gnu/packages/mpd.scm index c0cab60076..1ff1f39389 100644 --- a/gnu/packages/mpd.scm +++ b/gnu/packages/mpd.scm @@ -60,7 +60,7 @@ (define-public libmpdclient (package (name "libmpdclient") - (version "2.16") + (version "2.17") (source (origin (method url-fetch) (uri @@ -69,7 +69,7 @@ "/libmpdclient-" version ".tar.xz")) (sha256 (base32 - "0r24cl3i9nvs6a47mvwaxk1kb5wmnhkhrw1q5cq9010fgjvdlszs")))) + "0n9mrrmk20p4mfsz782jziax9z3bn7vxlm53327mrdlmgqf8z6zf")))) (build-system meson-build-system) (native-inputs `(("pkg-config" ,pkg-config) @@ -92,7 +92,7 @@ interfacing MPD in the C, C++ & Objective C languages.") (define-public mpd (package (name "mpd") - (version "0.21.16") + (version "0.21.17") (source (origin (method url-fetch) (uri @@ -101,7 +101,7 @@ interfacing MPD in the C, C++ & Objective C languages.") "/mpd-" version ".tar.xz")) (sha256 (base32 - "14jd9byvxlxmn9ygkyap1izy0d7i2lsssib74y3q8f6pyzfipkrh")))) + "0qka4g4dd6a6fxi03jnrd8ya70vfijmsxz642adfjqa626gam644")))) (build-system meson-build-system) (arguments `(#:configure-flags '("-Ddocumentation=true"))) ;the default is 'false'... diff --git a/gnu/packages/mpi.scm b/gnu/packages/mpi.scm index 45941df0b0..55641d8fa1 100644 --- a/gnu/packages/mpi.scm +++ b/gnu/packages/mpi.scm @@ -29,7 +29,6 @@ #:use-module ((guix licenses) #:hide (expat)) #:use-module (guix download) - #:use-module (guix git-download) #:use-module (guix utils) #:use-module (guix deprecation) #:use-module (guix build-system gnu) @@ -357,57 +356,6 @@ only provides @code{MPI_THREAD_FUNNELED}."))) (setenv "UCX_LOG_LEVEL" "error") #t)) -(define-public intel-mpi-benchmarks - (package - (name "intel-mpi-benchmarks") - (version "2019.3") - (source (origin - (method git-fetch) - (uri (git-reference - (url "https://github.com/intel/mpi-benchmarks.git") - (commit (string-append "IMB-v" version)))) - (file-name (git-file-name name version)) - (sha256 - (base32 - "0si5xi6ilhd3w0gbsg124589pvp094hvf366rvjjb9pi7pdk5p4i")))) - (build-system gnu-build-system) - (arguments - '(#:phases (modify-phases %standard-phases - (delete 'configure) - (delete 'check) - (replace 'install - (lambda* (#:key outputs #:allow-other-keys) - (define (benchmark? file stat) - (and (string-prefix? "IMB-" (basename file)) - (executable-file? file))) - - (let* ((out (assoc-ref outputs "out")) - (bin (string-append out "/bin"))) - (for-each (lambda (file) - (install-file file bin)) - (find-files "." benchmark?)) - #t)))) - - ;; The makefile doesn't express all the dependencies, it seems. - #:parallel-build? #t - - #:make-flags (list (string-append "CC=" - (assoc-ref %build-inputs "openmpi") - "/bin/mpicc") - (string-append "CXX=" - (assoc-ref %build-inputs "openmpi") - "/bin/mpicxx")))) - (inputs - `(("openmpi" ,openmpi))) - (home-page "https://github.com/intel/mpi-benchmarks") - (synopsis "Benchmarks for the Message Passing Interface (MPI)") - (description - "Intel MPI Benchmarks (IMB) provides a set of elementary benchmarks that -conform with versions 1, 2, and 3 of the Message Passing Interface (MPI).") - (license - (fsf-free "https://directory.fsf.org/wiki/License:CPL-1.0" - "https://www.gnu.org/licenses/license-list.html#CommonPublicLicense10")))) - (define-public python-mpi4py (package (name "python-mpi4py") diff --git a/gnu/packages/music.scm b/gnu/packages/music.scm index b526e26811..2a1dd57edd 100644 --- a/gnu/packages/music.scm +++ b/gnu/packages/music.scm @@ -1583,7 +1583,7 @@ reverb effects.") (define-public setbfree (package (name "setbfree") - (version "0.8.9") + (version "0.8.11") (source (origin (method git-fetch) (uri (git-reference @@ -1592,7 +1592,7 @@ reverb effects.") (file-name (git-file-name name version)) (sha256 (base32 - "1lpsa64xvwa9xbbp8zcwxy5w0daffc7fziny2pizabqh7m9xqjl2")))) + "1s3ps3cjwlm63ml4izb7mizy8ci5pl9a19lvz62xf0br089h3afc")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no "check" target @@ -2185,7 +2185,7 @@ capabilities, custom envelopes, effects, etc.") (define-public yoshimi (package (name "yoshimi") - (version "1.6.0.3") + (version "1.6.1") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/yoshimi/" @@ -2193,7 +2193,7 @@ capabilities, custom envelopes, effects, etc.") "/yoshimi-" version ".tar.bz2")) (sha256 (base32 - "1z2mnmm299ng6jcwa61dzr1ilwa5fjgsggxl2wa5smji6b4npmx7")))) + "1shnz429zgl0b4y5bpb61frk1747jwqfahq4hx44c972580zghzh")))) (build-system cmake-build-system) (arguments `(#:tests? #f ; there are no tests @@ -2569,11 +2569,21 @@ socket or command line.") (base32 "11bf0jnj8h2fxhpdp498189r4s6b47vy4wripv0z4nx7lxajl88i")))) (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'link-to-mpv + (lambda* (#:key inputs #:allow-other-keys) + (substitute* "curseradio/curseradio.py" + (("/usr/bin/mpv") + (string-append (assoc-ref inputs "mpv") "/bin/mpv"))) + #t))))) (propagated-inputs `(("python-lxml" ,python-lxml) ("python-requests" ,python-requests) - ("python-pyxdg" ,python-pyxdg) - ("mpv" ,mpv))) + ("python-pyxdg" ,python-pyxdg))) + (inputs + `(("mpv" ,mpv))) (home-page "https://github.com/chronitis/curseradio") (synopsis "Command-line Internet radio player") (description "Curseradio is a Curses-based radio player that uses a @@ -2882,6 +2892,7 @@ Songs can be searched by artist, name or even by a part of the song text.") ("python-munkres" ,python-munkres) ("python-musicbrainzngs" ,python-musicbrainzngs) ("python-mutagen" ,python-mutagen) + ("python-pyacoustid" ,python-pyacoustid) ("python-pyyaml" ,python-pyyaml) ("python-unidecode" ,python-unidecode))) (home-page "https://beets.io") @@ -3924,7 +3935,7 @@ sample library.") (string-map (lambda (c) (if (char=? c #\.) #\_ c)) version))))) - (file-name (string-append name "-" version "-checkout")) + (file-name (git-file-name name version)) (sha256 (base32 "1nninz8qyqlxxjdnrm79y3gr3056pga9l2fsqh674jd3cjvafya3")))) @@ -4383,7 +4394,7 @@ at @code{musicbrainz.org}.") (define-public clyrics (package (name "clyrics") - (version "0.11") + (version "0.12") (source (origin (method git-fetch) @@ -4392,8 +4403,7 @@ at @code{musicbrainz.org}.") (commit version))) (file-name (git-file-name name version)) (sha256 - (base32 - "0vfjy555achgi5zwa34x4q7r692nc6bq4jx518a5w4m7k5fvm71j")))) + (base32 "1l9iqz6vxrrxapv7s110g360bqxksir4dcqd8w0l4lhmnfmz3vnk")))) (build-system trivial-build-system) (inputs `(("bash" ,bash) ; for the wrapped program @@ -5007,7 +5017,7 @@ Soul Force), MVerb, Nekobi, and ProM.") (define-public avldrums-lv2 (package (name "avldrums-lv2") - (version "0.4.0") + (version "0.4.1") (source (origin (method git-fetch) @@ -5019,8 +5029,7 @@ Soul Force), MVerb, Nekobi, and ProM.") (recursive? #t))) (file-name (git-file-name name version)) (sha256 - (base32 - "1z70rcq6z3gkb4fm8dm9hs31bslwr97zdh2n012fzki9b9rdj5qv")))) + (base32 "1vwdp3d8qzd493qa99ddya7iql67bbfxmbcl8hk96lxif2lhmyws")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no "check" target diff --git a/gnu/packages/nano.scm b/gnu/packages/nano.scm index c275850851..0aceef83ea 100644 --- a/gnu/packages/nano.scm +++ b/gnu/packages/nano.scm @@ -30,13 +30,13 @@ (define-public nano (package (name "nano") - (version "4.6") + (version "4.7") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/nano/nano-" version ".tar.xz")) (sha256 - (base32 "1s98jsvkfar6qmd5n5l1n1k59623dnc93ciyvlhxjkvpad0kmb4v")))) + (base32 "1x9nqy2kgaz6087p63i71gdjsqbdc9jjpx1ymlyclfakvsby3h2q")))) (build-system gnu-build-system) (inputs `(("gettext" ,gettext-minimal) diff --git a/gnu/packages/networking.scm b/gnu/packages/networking.scm index cfa244c39b..482305de35 100644 --- a/gnu/packages/networking.scm +++ b/gnu/packages/networking.scm @@ -602,14 +602,14 @@ of the same name.") (define-public wireshark (package (name "wireshark") - (version "3.0.7") + (version "3.2.0") (source (origin (method url-fetch) (uri (string-append "https://www.wireshark.org/download/src/wireshark-" version ".tar.xz")) (sha256 - (base32 "1wljg5z994r8zbjig52zlgp0b8lqbzdl1d6ysnw9hcvm2y82farv")))) + (base32 "0v5nn7i2nbqr59jsw8cs2052hr7xd96x1sa3480g8ks5kahk7zac")))) (build-system cmake-build-system) (arguments `(#:phases @@ -1675,7 +1675,7 @@ networks.") (define-public speedtest-cli (package (name "speedtest-cli") - (version "2.1.1") + (version "2.1.2") (source (origin (method git-fetch) @@ -1684,7 +1684,7 @@ networks.") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 - (base32 "0swm7nbk99w2xf1cb0l3c8y1vm4rqw6785p5j04alyb0g98vqa4b")))) + (base32 "1456yly6iym2c9bl6pi4sz8xbw34bm2dxm1vzpydsd6jazwpmy26")))) (build-system python-build-system) (home-page "https://github.com/sivel/speedtest-cli") (synopsis "Internet bandwidth tester") @@ -1976,14 +1976,14 @@ displays the results in real time.") (define-public strongswan (package (name "strongswan") - (version "5.8.1") + (version "5.8.2") (source (origin (method url-fetch) (uri (string-append "https://download.strongswan.org/strongswan-" version ".tar.bz2")) (sha256 - (base32 "034rd6kr1bmnvj8rg2kcxdjb0cgj3dn9310mmm94j1awxan71byr")))) + (base32 "03j3fx357bh89n44a5v9wdc92azdx2d37j7jmlyr4z1kwzdhv446")))) (build-system gnu-build-system) (arguments `(#:phases @@ -2703,15 +2703,14 @@ maximum extent possible.") (define-public batctl (package (name "batctl") - (version "2019.3") + (version "2019.5") (source (origin (method url-fetch) (uri (string-append "https://downloads.open-mesh.org/batman/releases/batman-adv-" version "/batctl-" version ".tar.gz")) (sha256 - (base32 - "0307a01n72kg7vcm60mi8jna6bydiin2cr3ylrixra1596hkzn9b")))) + (base32 "1b9w4636dq8m38nzr8j0v0j3b0vdsw84c58c2isc33h66dx8brgz")))) (inputs `(("libnl" ,libnl))) (native-inputs diff --git a/gnu/packages/parallel.scm b/gnu/packages/parallel.scm index 3cb39473fb..5bed372432 100644 --- a/gnu/packages/parallel.scm +++ b/gnu/packages/parallel.scm @@ -54,14 +54,14 @@ (define-public parallel (package (name "parallel") - (version "20191122") + (version "20191222") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/parallel/parallel-" version ".tar.bz2")) (sha256 - (base32 "01wmk3sf34d2lmhl37j4ga7aims2hcnzv1bydg1xs4pablar6ahq")))) + (base32 "0xvw578440s9cc382n7z2l8npj30nwr6wwmkyxn2pj1pcszfjagy")))) (build-system gnu-build-system) (arguments `(#:phases diff --git a/gnu/packages/password-utils.scm b/gnu/packages/password-utils.scm index dd24808a7e..db5f54e1d9 100644 --- a/gnu/packages/password-utils.scm +++ b/gnu/packages/password-utils.scm @@ -514,6 +514,7 @@ any X11 window.") (native-search-paths (list (search-path-specification (variable "PASSWORD_STORE_SYSTEM_EXTENSION_DIR") + (separator #f) ;single entry (files '("lib/password-store/extensions"))))) (inputs `(("dmenu" ,dmenu) diff --git a/gnu/packages/patches/audiofile-CVE-2015-7747.patch b/gnu/packages/patches/audiofile-CVE-2015-7747.patch new file mode 100644 index 0000000000..3325639591 --- /dev/null +++ b/gnu/packages/patches/audiofile-CVE-2015-7747.patch @@ -0,0 +1,156 @@ +Description: fix buffer overflow when changing both sample format and + number of channels +Origin: https://github.com/mpruett/audiofile/pull/25 +Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/audiofile/+bug/1502721 +Bug-Debian: https://bugs.debian.org/801102 + +--- a/libaudiofile/modules/ModuleState.cpp ++++ b/libaudiofile/modules/ModuleState.cpp +@@ -402,7 +402,7 @@ status ModuleState::arrange(AFfilehandle + addModule(new Transform(outfc, in.pcm, out.pcm)); + + if (in.channelCount != out.channelCount) +- addModule(new ApplyChannelMatrix(infc, isReading, ++ addModule(new ApplyChannelMatrix(outfc, isReading, + in.channelCount, out.channelCount, + in.pcm.minClip, in.pcm.maxClip, + track->channelMatrix)); +--- a/test/Makefile.am ++++ b/test/Makefile.am +@@ -26,6 +26,7 @@ TESTS = \ + VirtualFile \ + floatto24 \ + query2 \ ++ sixteen-stereo-to-eight-mono \ + sixteen-to-eight \ + testchannelmatrix \ + testdouble \ +@@ -139,6 +140,7 @@ printmarkers_SOURCES = printmarkers.c + printmarkers_LDADD = $(LIBAUDIOFILE) -lm + + sixteen_to_eight_SOURCES = sixteen-to-eight.c TestUtilities.cpp TestUtilities.h ++sixteen_stereo_to_eight_mono_SOURCES = sixteen-stereo-to-eight-mono.c TestUtilities.cpp TestUtilities.h + + testchannelmatrix_SOURCES = testchannelmatrix.c TestUtilities.cpp TestUtilities.h + +--- /dev/null ++++ b/test/sixteen-stereo-to-eight-mono.c +@@ -0,0 +1,118 @@ ++/* ++ Audio File Library ++ ++ Copyright 2000, Silicon Graphics, Inc. ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++*/ ++ ++/* ++ sixteen-stereo-to-eight-mono.c ++ ++ This program tests the conversion from 2-channel 16-bit integers to ++ 1-channel 8-bit integers. ++*/ ++ ++#ifdef HAVE_CONFIG_H ++#include <config.h> ++#endif ++ ++#include <stdint.h> ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#include <unistd.h> ++#include <limits.h> ++ ++#include <audiofile.h> ++ ++#include "TestUtilities.h" ++ ++int main (int argc, char **argv) ++{ ++ AFfilehandle file; ++ AFfilesetup setup; ++ int16_t frames16[] = {14298, 392, 3923, -683, 958, -1921}; ++ int8_t frames8[] = {28, 6, -2}; ++ int i, frameCount = 3; ++ int8_t byte; ++ AFframecount result; ++ ++ setup = afNewFileSetup(); ++ ++ afInitFileFormat(setup, AF_FILE_WAVE); ++ ++ afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_TWOSCOMP, 16); ++ afInitChannels(setup, AF_DEFAULT_TRACK, 2); ++ ++ char *testFileName; ++ if (!createTemporaryFile("sixteen-to-eight", &testFileName)) ++ { ++ fprintf(stderr, "Could not create temporary file.\n"); ++ exit(EXIT_FAILURE); ++ } ++ ++ file = afOpenFile(testFileName, "w", setup); ++ if (file == AF_NULL_FILEHANDLE) ++ { ++ fprintf(stderr, "could not open file for writing\n"); ++ exit(EXIT_FAILURE); ++ } ++ ++ afFreeFileSetup(setup); ++ ++ afWriteFrames(file, AF_DEFAULT_TRACK, frames16, frameCount); ++ ++ afCloseFile(file); ++ ++ file = afOpenFile(testFileName, "r", AF_NULL_FILESETUP); ++ if (file == AF_NULL_FILEHANDLE) ++ { ++ fprintf(stderr, "could not open file for reading\n"); ++ exit(EXIT_FAILURE); ++ } ++ ++ afSetVirtualSampleFormat(file, AF_DEFAULT_TRACK, AF_SAMPFMT_TWOSCOMP, 8); ++ afSetVirtualChannels(file, AF_DEFAULT_TRACK, 1); ++ ++ for (i=0; i<frameCount; i++) ++ { ++ /* Read one frame. */ ++ result = afReadFrames(file, AF_DEFAULT_TRACK, &byte, 1); ++ ++ if (result != 1) ++ break; ++ ++ /* Compare the byte read with its precalculated value. */ ++ if (memcmp(&byte, &frames8[i], 1) != 0) ++ { ++ printf("error\n"); ++ printf("expected %d, got %d\n", frames8[i], byte); ++ exit(EXIT_FAILURE); ++ } ++ else ++ { ++#ifdef DEBUG ++ printf("got what was expected: %d\n", byte); ++#endif ++ } ++ } ++ ++ afCloseFile(file); ++ unlink(testFileName); ++ free(testFileName); ++ ++ exit(EXIT_SUCCESS); ++} diff --git a/gnu/packages/patches/audiofile-CVE-2018-13440.patch b/gnu/packages/patches/audiofile-CVE-2018-13440.patch new file mode 100644 index 0000000000..ffd65b43b0 --- /dev/null +++ b/gnu/packages/patches/audiofile-CVE-2018-13440.patch @@ -0,0 +1,28 @@ +From fde6d79fb8363c4a329a184ef0b107156602b225 Mon Sep 17 00:00:00 2001 +From: Wim Taymans <wtaymans@redhat.com> +Date: Thu, 27 Sep 2018 10:48:45 +0200 +Subject: [PATCH] ModuleState: handle compress/decompress init failure + +When the unit initcompress or initdecompress function fails, +m_fileModule is NULL. Return AF_FAIL in that case instead of +causing NULL pointer dereferences later. + +Fixes #49 +--- + libaudiofile/modules/ModuleState.cpp | 3 +++ + 1 file changed, 3 insertions(+) + +diff --git a/libaudiofile/modules/ModuleState.cpp b/libaudiofile/modules/ModuleState.cpp +index 0c29d7a..070fd9b 100644 +--- a/libaudiofile/modules/ModuleState.cpp ++++ b/libaudiofile/modules/ModuleState.cpp +@@ -75,6 +75,9 @@ status ModuleState::initFileModule(AFfilehandle file, Track *track) + m_fileModule = unit->initcompress(track, file->m_fh, file->m_seekok, + file->m_fileFormat == AF_FILE_RAWDATA, &chunkFrames); + ++ if (!m_fileModule) ++ return AF_FAIL; ++ + if (unit->needsRebuffer) + { + assert(unit->nativeSampleFormat == AF_SAMPFMT_TWOSCOMP); diff --git a/gnu/packages/patches/audiofile-CVE-2018-17095.patch b/gnu/packages/patches/audiofile-CVE-2018-17095.patch new file mode 100644 index 0000000000..231021b9fc --- /dev/null +++ b/gnu/packages/patches/audiofile-CVE-2018-17095.patch @@ -0,0 +1,26 @@ +From 822b732fd31ffcb78f6920001e9b1fbd815fa712 Mon Sep 17 00:00:00 2001 +From: Wim Taymans <wtaymans@redhat.com> +Date: Thu, 27 Sep 2018 12:11:12 +0200 +Subject: [PATCH] SimpleModule: set output chunk framecount after pull + +After pulling the data, set the output chunk to the amount of +frames we pulled so that the next module in the chain has the correct +frame count. + +Fixes #50 and #51 +--- + libaudiofile/modules/SimpleModule.cpp | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/libaudiofile/modules/SimpleModule.cpp b/libaudiofile/modules/SimpleModule.cpp +index 2bae1eb..e87932c 100644 +--- a/libaudiofile/modules/SimpleModule.cpp ++++ b/libaudiofile/modules/SimpleModule.cpp +@@ -26,6 +26,7 @@ + void SimpleModule::runPull() + { + pull(m_outChunk->frameCount); ++ m_outChunk->frameCount = m_inChunk->frameCount; + run(*m_inChunk, *m_outChunk); + } + diff --git a/gnu/packages/patches/audiofile-Check-the-number-of-coefficients.patch b/gnu/packages/patches/audiofile-Check-the-number-of-coefficients.patch new file mode 100644 index 0000000000..f9427cbe61 --- /dev/null +++ b/gnu/packages/patches/audiofile-Check-the-number-of-coefficients.patch @@ -0,0 +1,30 @@ +From: Antonio Larrosa <larrosa@kde.org> +Date: Mon, 6 Mar 2017 12:51:22 +0100 +Subject: Always check the number of coefficients + +When building the library with NDEBUG, asserts are eliminated +so it's better to always check that the number of coefficients +is inside the array range. + +This fixes the 00191-audiofile-indexoob issue in #41 +--- + libaudiofile/WAVE.cpp | 6 ++++++ + 1 file changed, 6 insertions(+) + +diff --git a/libaudiofile/WAVE.cpp b/libaudiofile/WAVE.cpp +index 9dd8511..0fc48e8 100644 +--- a/libaudiofile/WAVE.cpp ++++ b/libaudiofile/WAVE.cpp +@@ -281,6 +281,12 @@ status WAVEFile::parseFormat(const Tag &id, uint32_t size) + + /* numCoefficients should be at least 7. */ + assert(numCoefficients >= 7 && numCoefficients <= 255); ++ if (numCoefficients < 7 || numCoefficients > 255) ++ { ++ _af_error(AF_BAD_HEADER, ++ "Bad number of coefficients"); ++ return AF_FAIL; ++ } + + m_msadpcmNumCoefficients = numCoefficients; + diff --git a/gnu/packages/patches/audiofile-Fail-on-error-in-parseFormat.patch b/gnu/packages/patches/audiofile-Fail-on-error-in-parseFormat.patch new file mode 100644 index 0000000000..50cd3dc9a3 --- /dev/null +++ b/gnu/packages/patches/audiofile-Fail-on-error-in-parseFormat.patch @@ -0,0 +1,36 @@ +From: Antonio Larrosa <larrosa@kde.org> +Date: Mon, 6 Mar 2017 18:59:26 +0100 +Subject: Actually fail when error occurs in parseFormat + +When there's an unsupported number of bits per sample or an invalid +number of samples per block, don't only print an error message using +the error handler, but actually stop parsing the file. + +This fixes #35 (also reported at +https://bugzilla.opensuse.org/show_bug.cgi?id=1026983 and +https://blogs.gentoo.org/ago/2017/02/20/audiofile-heap-based-buffer-overflow-in-imadecodeblockwave-ima-cpp/ +) +--- + libaudiofile/WAVE.cpp | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/libaudiofile/WAVE.cpp b/libaudiofile/WAVE.cpp +index 0fc48e8..d04b796 100644 +--- a/libaudiofile/WAVE.cpp ++++ b/libaudiofile/WAVE.cpp +@@ -332,6 +332,7 @@ status WAVEFile::parseFormat(const Tag &id, uint32_t size) + { + _af_error(AF_BAD_NOT_IMPLEMENTED, + "IMA ADPCM compression supports only 4 bits per sample"); ++ return AF_FAIL; + } + + int bytesPerBlock = (samplesPerBlock + 14) / 8 * 4 * channelCount; +@@ -339,6 +340,7 @@ status WAVEFile::parseFormat(const Tag &id, uint32_t size) + { + _af_error(AF_BAD_CODEC_CONFIG, + "Invalid samples per block for IMA ADPCM compression"); ++ return AF_FAIL; + } + + track->f.sampleWidth = 16; diff --git a/gnu/packages/patches/audiofile-Fix-index-overflow-in-IMA.cpp.patch b/gnu/packages/patches/audiofile-Fix-index-overflow-in-IMA.cpp.patch new file mode 100644 index 0000000000..c1047af06c --- /dev/null +++ b/gnu/packages/patches/audiofile-Fix-index-overflow-in-IMA.cpp.patch @@ -0,0 +1,33 @@ +From: Antonio Larrosa <larrosa@kde.org> +Date: Mon, 6 Mar 2017 18:02:31 +0100 +Subject: clamp index values to fix index overflow in IMA.cpp + +This fixes #33 +(also reported at https://bugzilla.opensuse.org/show_bug.cgi?id=1026981 +and https://blogs.gentoo.org/ago/2017/02/20/audiofile-global-buffer-overflow-in-decodesample-ima-cpp/) +--- + libaudiofile/modules/IMA.cpp | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/libaudiofile/modules/IMA.cpp b/libaudiofile/modules/IMA.cpp +index 7476d44..df4aad6 100644 +--- a/libaudiofile/modules/IMA.cpp ++++ b/libaudiofile/modules/IMA.cpp +@@ -169,7 +169,7 @@ int IMA::decodeBlockWAVE(const uint8_t *encoded, int16_t *decoded) + if (encoded[1] & 0x80) + m_adpcmState[c].previousValue -= 0x10000; + +- m_adpcmState[c].index = encoded[2]; ++ m_adpcmState[c].index = clamp(encoded[2], 0, 88); + + *decoded++ = m_adpcmState[c].previousValue; + +@@ -210,7 +210,7 @@ int IMA::decodeBlockQT(const uint8_t *encoded, int16_t *decoded) + predictor -= 0x10000; + + state.previousValue = clamp(predictor, MIN_INT16, MAX_INT16); +- state.index = encoded[1] & 0x7f; ++ state.index = clamp(encoded[1] & 0x7f, 0, 88); + encoded += 2; + + for (int n=0; n<m_framesPerPacket; n+=2) diff --git a/gnu/packages/patches/audiofile-Fix-multiply-overflow-sfconvert.patch b/gnu/packages/patches/audiofile-Fix-multiply-overflow-sfconvert.patch new file mode 100644 index 0000000000..0f17140d6b --- /dev/null +++ b/gnu/packages/patches/audiofile-Fix-multiply-overflow-sfconvert.patch @@ -0,0 +1,66 @@ +From: Antonio Larrosa <larrosa@kde.org> +Date: Mon, 6 Mar 2017 13:54:52 +0100 +Subject: Check for multiplication overflow in sfconvert + +Checks that a multiplication doesn't overflow when +calculating the buffer size, and if it overflows, +reduce the buffer size instead of failing. + +This fixes the 00192-audiofile-signintoverflow-sfconvert case +in #41 +--- + sfcommands/sfconvert.c | 34 ++++++++++++++++++++++++++++++++-- + 1 file changed, 32 insertions(+), 2 deletions(-) + +diff --git a/sfcommands/sfconvert.c b/sfcommands/sfconvert.c +index 80a1bc4..970a3e4 100644 +--- a/sfcommands/sfconvert.c ++++ b/sfcommands/sfconvert.c +@@ -45,6 +45,33 @@ void printusage (void); + void usageerror (void); + bool copyaudiodata (AFfilehandle infile, AFfilehandle outfile, int trackid); + ++int firstBitSet(int x) ++{ ++ int position=0; ++ while (x!=0) ++ { ++ x>>=1; ++ ++position; ++ } ++ return position; ++} ++ ++#ifndef __has_builtin ++#define __has_builtin(x) 0 ++#endif ++ ++int multiplyCheckOverflow(int a, int b, int *result) ++{ ++#if (defined __GNUC__ && __GNUC__ >= 5) || ( __clang__ && __has_builtin(__builtin_mul_overflow)) ++ return __builtin_mul_overflow(a, b, result); ++#else ++ if (firstBitSet(a)+firstBitSet(b)>31) // int is signed, so we can't use 32 bits ++ return true; ++ *result = a * b; ++ return false; ++#endif ++} ++ + int main (int argc, char **argv) + { + if (argc == 2) +@@ -323,8 +350,11 @@ bool copyaudiodata (AFfilehandle infile, AFfilehandle outfile, int trackid) + { + int frameSize = afGetVirtualFrameSize(infile, trackid, 1); + +- const int kBufferFrameCount = 65536; +- void *buffer = malloc(kBufferFrameCount * frameSize); ++ int kBufferFrameCount = 65536; ++ int bufferSize; ++ while (multiplyCheckOverflow(kBufferFrameCount, frameSize, &bufferSize)) ++ kBufferFrameCount /= 2; ++ void *buffer = malloc(bufferSize); + + AFframecount totalFrames = afGetFrameCount(infile, AF_DEFAULT_TRACK); + AFframecount totalFramesWritten = 0; diff --git a/gnu/packages/patches/audiofile-Fix-overflow-in-MSADPCM-decodeSam.patch b/gnu/packages/patches/audiofile-Fix-overflow-in-MSADPCM-decodeSam.patch new file mode 100644 index 0000000000..2be930b924 --- /dev/null +++ b/gnu/packages/patches/audiofile-Fix-overflow-in-MSADPCM-decodeSam.patch @@ -0,0 +1,116 @@ +From: Antonio Larrosa <larrosa@kde.org> +Date: Mon, 6 Mar 2017 13:43:53 +0100 +Subject: Check for multiplication overflow in MSADPCM decodeSample + +Check for multiplication overflow (using __builtin_mul_overflow +if available) in MSADPCM.cpp decodeSample and return an empty +decoded block if an error occurs. + +This fixes the 00193-audiofile-signintoverflow-MSADPCM case of #41 +--- + libaudiofile/modules/BlockCodec.cpp | 5 ++-- + libaudiofile/modules/MSADPCM.cpp | 47 +++++++++++++++++++++++++++++++++---- + 2 files changed, 46 insertions(+), 6 deletions(-) + +diff --git a/libaudiofile/modules/BlockCodec.cpp b/libaudiofile/modules/BlockCodec.cpp +index 45925e8..4731be1 100644 +--- a/libaudiofile/modules/BlockCodec.cpp ++++ b/libaudiofile/modules/BlockCodec.cpp +@@ -52,8 +52,9 @@ void BlockCodec::runPull() + // Decompress into m_outChunk. + for (int i=0; i<blocksRead; i++) + { +- decodeBlock(static_cast<const uint8_t *>(m_inChunk->buffer) + i * m_bytesPerPacket, +- static_cast<int16_t *>(m_outChunk->buffer) + i * m_framesPerPacket * m_track->f.channelCount); ++ if (decodeBlock(static_cast<const uint8_t *>(m_inChunk->buffer) + i * m_bytesPerPacket, ++ static_cast<int16_t *>(m_outChunk->buffer) + i * m_framesPerPacket * m_track->f.channelCount)==0) ++ break; + + framesRead += m_framesPerPacket; + } +diff --git a/libaudiofile/modules/MSADPCM.cpp b/libaudiofile/modules/MSADPCM.cpp +index 8ea3c85..ef9c38c 100644 +--- a/libaudiofile/modules/MSADPCM.cpp ++++ b/libaudiofile/modules/MSADPCM.cpp +@@ -101,24 +101,60 @@ static const int16_t adaptationTable[] = + 768, 614, 512, 409, 307, 230, 230, 230 + }; + ++int firstBitSet(int x) ++{ ++ int position=0; ++ while (x!=0) ++ { ++ x>>=1; ++ ++position; ++ } ++ return position; ++} ++ ++#ifndef __has_builtin ++#define __has_builtin(x) 0 ++#endif ++ ++int multiplyCheckOverflow(int a, int b, int *result) ++{ ++#if (defined __GNUC__ && __GNUC__ >= 5) || ( __clang__ && __has_builtin(__builtin_mul_overflow)) ++ return __builtin_mul_overflow(a, b, result); ++#else ++ if (firstBitSet(a)+firstBitSet(b)>31) // int is signed, so we can't use 32 bits ++ return true; ++ *result = a * b; ++ return false; ++#endif ++} ++ ++ + // Compute a linear PCM value from the given differential coded value. + static int16_t decodeSample(ms_adpcm_state &state, +- uint8_t code, const int16_t *coefficient) ++ uint8_t code, const int16_t *coefficient, bool *ok=NULL) + { + int linearSample = (state.sample1 * coefficient[0] + + state.sample2 * coefficient[1]) >> 8; ++ int delta; + + linearSample += ((code & 0x08) ? (code - 0x10) : code) * state.delta; + + linearSample = clamp(linearSample, MIN_INT16, MAX_INT16); + +- int delta = (state.delta * adaptationTable[code]) >> 8; ++ if (multiplyCheckOverflow(state.delta, adaptationTable[code], &delta)) ++ { ++ if (ok) *ok=false; ++ _af_error(AF_BAD_COMPRESSION, "Error decoding sample"); ++ return 0; ++ } ++ delta >>= 8; + if (delta < 16) + delta = 16; + + state.delta = delta; + state.sample2 = state.sample1; + state.sample1 = linearSample; ++ if (ok) *ok=true; + + return static_cast<int16_t>(linearSample); + } +@@ -212,13 +248,16 @@ int MSADPCM::decodeBlock(const uint8_t *encoded, int16_t *decoded) + { + uint8_t code; + int16_t newSample; ++ bool ok; + + code = *encoded >> 4; +- newSample = decodeSample(*state[0], code, coefficient[0]); ++ newSample = decodeSample(*state[0], code, coefficient[0], &ok); ++ if (!ok) return 0; + *decoded++ = newSample; + + code = *encoded & 0x0f; +- newSample = decodeSample(*state[1], code, coefficient[1]); ++ newSample = decodeSample(*state[1], code, coefficient[1], &ok); ++ if (!ok) return 0; + *decoded++ = newSample; + + encoded++; diff --git a/gnu/packages/patches/audiofile-division-by-zero-BlockCodec-runPull.patch b/gnu/packages/patches/audiofile-division-by-zero-BlockCodec-runPull.patch new file mode 100644 index 0000000000..e001133916 --- /dev/null +++ b/gnu/packages/patches/audiofile-division-by-zero-BlockCodec-runPull.patch @@ -0,0 +1,21 @@ +From: Antonio Larrosa <larrosa@kde.org> +Date: Thu, 9 Mar 2017 10:21:18 +0100 +Subject: Check for division by zero in BlockCodec::runPull + +--- + libaudiofile/modules/BlockCodec.cpp | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/libaudiofile/modules/BlockCodec.cpp b/libaudiofile/modules/BlockCodec.cpp +index 4731be1..eb2fb4d 100644 +--- a/libaudiofile/modules/BlockCodec.cpp ++++ b/libaudiofile/modules/BlockCodec.cpp +@@ -47,7 +47,7 @@ void BlockCodec::runPull() + + // Read the compressed data. + ssize_t bytesRead = read(m_inChunk->buffer, m_bytesPerPacket * blockCount); +- int blocksRead = bytesRead >= 0 ? bytesRead / m_bytesPerPacket : 0; ++ int blocksRead = (bytesRead >= 0 && m_bytesPerPacket > 0) ? bytesRead / m_bytesPerPacket : 0; + + // Decompress into m_outChunk. + for (int i=0; i<blocksRead; i++) diff --git a/gnu/packages/patches/audiofile-fix-datatypes-in-tests.patch b/gnu/packages/patches/audiofile-fix-datatypes-in-tests.patch new file mode 100644 index 0000000000..00e0f3c4a3 --- /dev/null +++ b/gnu/packages/patches/audiofile-fix-datatypes-in-tests.patch @@ -0,0 +1,54 @@ +Based on (hunks for changelog and Identy.cpp removed) +From ecbc07f0ed336187cc9a67c3363f89681b8b8f52 Mon Sep 17 00:00:00 2001 +From: Michael Pruett <michael@68k.org> +Date: Tue, 5 Jul 2016 23:26:16 -0500 +Subject: [PATCH] Fix type of test data arrays. + + + + +--- + ChangeLog | 6 ++++++ + test/Identify.cpp | 3 ++- + test/NeXT.cpp | 7 ++++--- + 3 files changed, 12 insertions(+), 4 deletions(-) + +diff --git a/test/NeXT.cpp b/test/NeXT.cpp +index 7e39850..29af877 100644 +--- a/test/NeXT.cpp ++++ b/test/NeXT.cpp +@@ -30,6 +30,7 @@ + #include <audiofile.h> + #include <fcntl.h> + #include <gtest/gtest.h> ++#include <stdint.h> + #include <sys/stat.h> + #include <sys/types.h> + #include <unistd.h> +@@ -37,7 +38,7 @@ + + #include "TestUtilities.h" + +-const char kDataUnspecifiedLength[] = ++const uint8_t kDataUnspecifiedLength[] = + { + '.', 's', 'n', 'd', + 0, 0, 0, 24, // offset of 24 bytes +@@ -57,7 +58,7 @@ const char kDataUnspecifiedLength[] = + 0, 55 + }; + +-const char kDataTruncated[] = ++const uint8_t kDataTruncated[] = + { + '.', 's', 'n', 'd', + 0, 0, 0, 24, // offset of 24 bytes +@@ -152,7 +153,7 @@ TEST(NeXT, Truncated) + ASSERT_EQ(::unlink(testFileName.c_str()), 0); + } + +-const char kDataZeroChannels[] = ++const uint8_t kDataZeroChannels[] = + { + '.', 's', 'n', 'd', + 0, 0, 0, 24, // offset of 24 bytes diff --git a/gnu/packages/patches/audiofile-fix-sign-conversion.patch b/gnu/packages/patches/audiofile-fix-sign-conversion.patch new file mode 100644 index 0000000000..648161d620 --- /dev/null +++ b/gnu/packages/patches/audiofile-fix-sign-conversion.patch @@ -0,0 +1,26 @@ +Based on (hunk for changelog removed) +From b62c902dd258125cac86cd2df21fc898035a43d3 Mon Sep 17 00:00:00 2001 +From: Michael Pruett <michael@68k.org> +Date: Mon, 29 Aug 2016 23:08:26 -0500 +Subject: [PATCH] Fix undefined behavior in sign conversion. + + +--- + ChangeLog | 5 +++++ + libaudiofile/modules/SimpleModule.h | 3 ++- + 2 files changed, 7 insertions(+), 1 deletion(-) + +diff --git a/libaudiofile/modules/SimpleModule.h b/libaudiofile/modules/SimpleModule.h +index 03c6c69..bad85ad 100644 +--- a/libaudiofile/modules/SimpleModule.h ++++ b/libaudiofile/modules/SimpleModule.h +@@ -123,7 +123,8 @@ struct signConverter + typedef typename IntTypes<Format>::UnsignedType UnsignedType; + + static const int kScaleBits = (Format + 1) * CHAR_BIT - 1; +- static const int kMinSignedValue = -1 << kScaleBits; ++ static const int kMaxSignedValue = (((1 << (kScaleBits - 1)) - 1) << 1) + 1; ++ static const int kMinSignedValue = -kMaxSignedValue - 1; + + struct signedToUnsigned : public std::unary_function<SignedType, UnsignedType> + { diff --git a/gnu/packages/patches/audiofile-hurd.patch b/gnu/packages/patches/audiofile-hurd.patch new file mode 100644 index 0000000000..b5941dcf44 --- /dev/null +++ b/gnu/packages/patches/audiofile-hurd.patch @@ -0,0 +1,381 @@ +Description: Remove usage of PATH_MAX in tests to fix FTBFS on Hurd. + jcowgill: Removed Changelog changes +Author: Pino Toscano <toscano.pino@tiscali.it> +Origin: backport, https://github.com/mpruett/audiofile/commit/34c261034f1193a783196618f0052112e00fbcfe +Bug: https://github.com/mpruett/audiofile/pull/17 +Bug-Debian: https://bugs.debian.org/762595 +--- +This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ + +--- a/test/TestUtilities.cpp ++++ b/test/TestUtilities.cpp +@@ -21,8 +21,8 @@ + #include "TestUtilities.h" + + #include <limits.h> +-#include <stdio.h> + #include <stdlib.h> ++#include <string.h> + #include <unistd.h> + + bool createTemporaryFile(const std::string &prefix, std::string *path) +@@ -35,12 +35,12 @@ bool createTemporaryFile(const std::stri + return true; + } + +-bool createTemporaryFile(const char *prefix, char *path) ++bool createTemporaryFile(const char *prefix, char **path) + { +- snprintf(path, PATH_MAX, "/tmp/%s-XXXXXX", prefix); +- int fd = ::mkstemp(path); +- if (fd < 0) +- return false; +- ::close(fd); +- return true; ++ *path = NULL; ++ std::string pathString; ++ bool result = createTemporaryFile(prefix, &pathString); ++ if (result) ++ *path = ::strdup(pathString.c_str()); ++ return result; + } +--- a/test/TestUtilities.h ++++ b/test/TestUtilities.h +@@ -53,7 +53,7 @@ extern "C" { + + #include <stdbool.h> + +-bool createTemporaryFile(const char *prefix, char *path); ++bool createTemporaryFile(const char *prefix, char **path); + + #ifdef __cplusplus + } +--- a/test/floatto24.c ++++ b/test/floatto24.c +@@ -86,8 +86,8 @@ int main (int argc, char **argv) + afInitChannels(setup, AF_DEFAULT_TRACK, 1); + afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_FLOAT, 32); + +- char testFileName[PATH_MAX]; +- if (!createTemporaryFile("floatto24", testFileName)) ++ char *testFileName; ++ if (!createTemporaryFile("floatto24", &testFileName)) + { + fprintf(stderr, "Could not create temporary file.\n"); + exit(EXIT_FAILURE); +@@ -182,6 +182,7 @@ int main (int argc, char **argv) + } + + unlink(testFileName); ++ free(testFileName); + + exit(EXIT_SUCCESS); + } +--- a/test/sixteen-to-eight.c ++++ b/test/sixteen-to-eight.c +@@ -57,8 +57,8 @@ int main (int argc, char **argv) + afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_UNSIGNED, 8); + afInitChannels(setup, AF_DEFAULT_TRACK, 1); + +- char testFileName[PATH_MAX]; +- if (!createTemporaryFile("sixteen-to-eight", testFileName)) ++ char *testFileName; ++ if (!createTemporaryFile("sixteen-to-eight", &testFileName)) + { + fprintf(stderr, "Could not create temporary file.\n"); + exit(EXIT_FAILURE); +@@ -113,6 +113,7 @@ int main (int argc, char **argv) + + afCloseFile(file); + unlink(testFileName); ++ free(testFileName); + + exit(EXIT_SUCCESS); + } +--- a/test/testchannelmatrix.c ++++ b/test/testchannelmatrix.c +@@ -39,7 +39,7 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + const short samples[] = {300, -300, 515, -515, 2315, -2315, 9154, -9154}; + #define SAMPLE_COUNT (sizeof (samples) / sizeof (short)) +@@ -47,7 +47,11 @@ const short samples[] = {300, -300, 515, + + void cleanup (void) + { +- unlink(sTestFileName); ++ if (sTestFileName) ++ { ++ unlink(sTestFileName); ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -76,7 +80,7 @@ int main (void) + afInitFileFormat(setup, AF_FILE_AIFFC); + + /* Write stereo data to test file. */ +- ensure(createTemporaryFile("testchannelmatrix", sTestFileName), ++ ensure(createTemporaryFile("testchannelmatrix", &sTestFileName), + "could not create temporary file"); + file = afOpenFile(sTestFileName, "w", setup); + ensure(file != AF_NULL_FILEHANDLE, "could not open file for writing"); +--- a/test/testdouble.c ++++ b/test/testdouble.c +@@ -38,7 +38,7 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + const double samples[] = + {1.0, 0.6, -0.3, 0.95, 0.2, -0.6, 0.9, 0.4, -0.22, 0.125, 0.1, -0.4}; +@@ -48,7 +48,11 @@ void testdouble (int fileFormat); + + void cleanup (void) + { +- unlink(sTestFileName); ++ if (sTestFileName) ++ { ++ unlink(sTestFileName); ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -96,7 +100,7 @@ void testdouble (int fileFormat) + afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_DOUBLE, 64); + afInitChannels(setup, AF_DEFAULT_TRACK, 2); + +- ensure(createTemporaryFile("testdouble", sTestFileName), ++ ensure(createTemporaryFile("testdouble", &sTestFileName), + "could not create temporary file"); + file = afOpenFile(sTestFileName, "w", setup); + ensure(file != AF_NULL_FILEHANDLE, "could not open file for writing"); +--- a/test/testfloat.c ++++ b/test/testfloat.c +@@ -38,7 +38,7 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + const float samples[] = + {1.0, 0.6, -0.3, 0.95, 0.2, -0.6, 0.9, 0.4, -0.22, 0.125, 0.1, -0.4}; +@@ -48,7 +48,11 @@ void testfloat (int fileFormat); + + void cleanup (void) + { +- unlink(sTestFileName); ++ if (sTestFileName) ++ { ++ unlink(sTestFileName); ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -96,7 +100,7 @@ void testfloat (int fileFormat) + afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_FLOAT, 32); + afInitChannels(setup, AF_DEFAULT_TRACK, 2); + +- ensure(createTemporaryFile("testfloat", sTestFileName), ++ ensure(createTemporaryFile("testfloat", &sTestFileName), + "could not create temporary file"); + file = afOpenFile(sTestFileName, "w", setup); + ensure(file != AF_NULL_FILEHANDLE, "could not open file for writing"); +--- a/test/testmarkers.c ++++ b/test/testmarkers.c +@@ -32,15 +32,19 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + #define FRAME_COUNT 200 + + void cleanup (void) + { ++ if (sTestFileName) ++ { + #ifndef DEBUG +- unlink(sTestFileName); ++ unlink(sTestFileName); + #endif ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -127,7 +131,7 @@ int testmarkers (int fileformat) + + int main (void) + { +- ensure(createTemporaryFile("testmarkers", sTestFileName), ++ ensure(createTemporaryFile("testmarkers", &sTestFileName), + "could not create temporary file"); + + testmarkers(AF_FILE_AIFF); +--- a/test/twentyfour.c ++++ b/test/twentyfour.c +@@ -71,8 +71,8 @@ int main (int argc, char **argv) + afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_TWOSCOMP, 24); + afInitChannels(setup, AF_DEFAULT_TRACK, 1); + +- char testFileName[PATH_MAX]; +- if (!createTemporaryFile("twentyfour", testFileName)) ++ char *testFileName; ++ if (!createTemporaryFile("twentyfour", &testFileName)) + { + fprintf(stderr, "could not create temporary file\n"); + exit(EXIT_FAILURE); +@@ -239,6 +239,7 @@ int main (int argc, char **argv) + exit(EXIT_FAILURE); + } + unlink(testFileName); ++ free(testFileName); + + exit(EXIT_SUCCESS); + } +--- a/test/twentyfour2.c ++++ b/test/twentyfour2.c +@@ -45,15 +45,19 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + #define FRAME_COUNT 10000 + + void cleanup (void) + { ++ if (sTestFileName) ++ { + #ifndef DEBUG +- unlink(sTestFileName); ++ unlink(sTestFileName); + #endif ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -78,7 +82,7 @@ int main (void) + afInitChannels(setup, AF_DEFAULT_TRACK, 1); + afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_TWOSCOMP, 24); + +- ensure(createTemporaryFile("twentyfour2", sTestFileName), ++ ensure(createTemporaryFile("twentyfour2", &sTestFileName), + "could not create temporary file"); + file = afOpenFile(sTestFileName, "w", setup); + ensure(file != NULL, "could not open test file for writing"); +--- a/test/writealaw.c ++++ b/test/writealaw.c +@@ -53,7 +53,7 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + #define FRAME_COUNT 16 + #define SAMPLE_COUNT FRAME_COUNT +@@ -62,9 +62,13 @@ void testalaw (int fileFormat); + + void cleanup (void) + { ++ if (sTestFileName) ++ { + #ifndef DEBUG +- unlink(sTestFileName); ++ unlink(sTestFileName); + #endif ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -113,7 +117,7 @@ void testalaw (int fileFormat) + afInitFileFormat(setup, fileFormat); + afInitChannels(setup, AF_DEFAULT_TRACK, 1); + +- ensure(createTemporaryFile("writealaw", sTestFileName), ++ ensure(createTemporaryFile("writealaw", &sTestFileName), + "could not create temporary file"); + file = afOpenFile(sTestFileName, "w", setup); + afFreeFileSetup(setup); +--- a/test/writeraw.c ++++ b/test/writeraw.c +@@ -44,13 +44,17 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + void cleanup (void) + { ++ if (sTestFileName) ++ { + #ifndef DEBUG +- unlink(sTestFileName); ++ unlink(sTestFileName); + #endif ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -84,7 +88,7 @@ int main (int argc, char **argv) + afInitChannels(setup, AF_DEFAULT_TRACK, 1); + afInitSampleFormat(setup, AF_DEFAULT_TRACK, AF_SAMPFMT_TWOSCOMP, 16); + +- ensure(createTemporaryFile("writeraw", sTestFileName), ++ ensure(createTemporaryFile("writeraw", &sTestFileName), + "could not create temporary file"); + file = afOpenFile(sTestFileName, "w", setup); + ensure(file != AF_NULL_FILEHANDLE, "unable to open file for writing"); +--- a/test/writeulaw.c ++++ b/test/writeulaw.c +@@ -53,7 +53,7 @@ + + #include "TestUtilities.h" + +-static char sTestFileName[PATH_MAX]; ++static char *sTestFileName; + + #define FRAME_COUNT 16 + #define SAMPLE_COUNT FRAME_COUNT +@@ -62,9 +62,13 @@ void testulaw (int fileFormat); + + void cleanup (void) + { ++ if (sTestFileName) ++ { + #ifndef DEBUG +- unlink(sTestFileName); ++ unlink(sTestFileName); + #endif ++ free(sTestFileName); ++ } + } + + void ensure (int condition, const char *message) +@@ -113,7 +117,7 @@ void testulaw (int fileFormat) + afInitFileFormat(setup, fileFormat); + afInitChannels(setup, AF_DEFAULT_TRACK, 1); + +- ensure(createTemporaryFile("writeulaw", sTestFileName), ++ ensure(createTemporaryFile("writeulaw", &sTestFileName), + "could not create temporary file"); + file = afOpenFile(sTestFileName, "w", setup); + afFreeFileSetup(setup); diff --git a/gnu/packages/patches/audiofile-signature-of-multiplyCheckOverflow.patch b/gnu/packages/patches/audiofile-signature-of-multiplyCheckOverflow.patch new file mode 100644 index 0000000000..35627d3869 --- /dev/null +++ b/gnu/packages/patches/audiofile-signature-of-multiplyCheckOverflow.patch @@ -0,0 +1,35 @@ +From: Antonio Larrosa <larrosa@kde.org> +Date: Fri, 10 Mar 2017 15:40:02 +0100 +Subject: Fix signature of multiplyCheckOverflow. It returns a bool, not an int + +--- + libaudiofile/modules/MSADPCM.cpp | 2 +- + sfcommands/sfconvert.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/libaudiofile/modules/MSADPCM.cpp b/libaudiofile/modules/MSADPCM.cpp +index ef9c38c..d8c9553 100644 +--- a/libaudiofile/modules/MSADPCM.cpp ++++ b/libaudiofile/modules/MSADPCM.cpp +@@ -116,7 +116,7 @@ int firstBitSet(int x) + #define __has_builtin(x) 0 + #endif + +-int multiplyCheckOverflow(int a, int b, int *result) ++bool multiplyCheckOverflow(int a, int b, int *result) + { + #if (defined __GNUC__ && __GNUC__ >= 5) || ( __clang__ && __has_builtin(__builtin_mul_overflow)) + return __builtin_mul_overflow(a, b, result); +diff --git a/sfcommands/sfconvert.c b/sfcommands/sfconvert.c +index 970a3e4..367f7a5 100644 +--- a/sfcommands/sfconvert.c ++++ b/sfcommands/sfconvert.c +@@ -60,7 +60,7 @@ int firstBitSet(int x) + #define __has_builtin(x) 0 + #endif + +-int multiplyCheckOverflow(int a, int b, int *result) ++bool multiplyCheckOverflow(int a, int b, int *result) + { + #if (defined __GNUC__ && __GNUC__ >= 5) || ( __clang__ && __has_builtin(__builtin_mul_overflow)) + return __builtin_mul_overflow(a, b, result); diff --git a/gnu/packages/patches/emacs27-exec-path.patch b/gnu/packages/patches/emacs27-exec-path.patch new file mode 100644 index 0000000000..418aa633a1 --- /dev/null +++ b/gnu/packages/patches/emacs27-exec-path.patch @@ -0,0 +1,18 @@ +Do not capture the build-time value of $PATH in the 'emacs' executable +since this can noticeably increase the size of the closure of Emacs +with things like GCC being referenced. + +(like emacs-exec-path.patch, but for Emacs 27) + +--- a/lisp/loadup.el ++++ b/lisp/loadup.el +@@ -479,7 +479,8 @@ lost after dumping"))) + ((equal dump-mode "dump") "emacs") + ((equal dump-mode "bootstrap") "emacs") + ((equal dump-mode "pbootstrap") "bootstrap-emacs.pdmp") +- (t (error "unrecognized dump mode %s" dump-mode))))) ++ (t (error "unrecognized dump mode %s" dump-mode)))) ++ (exec-path nil)) + (message "Dumping under the name %s" output) + (condition-case () + (delete-file output) diff --git a/gnu/packages/patches/gcc-7-cross-environment-variables.patch b/gnu/packages/patches/gcc-7-cross-environment-variables.patch new file mode 100644 index 0000000000..99ae36f103 --- /dev/null +++ b/gnu/packages/patches/gcc-7-cross-environment-variables.patch @@ -0,0 +1,67 @@ +Search path environment variables for cross-compilers. See the discussion +at <http://gcc.gnu.org/ml/gcc/2013-02/msg00124.html>. + +Note: Touch 'C_INCLUDE_PATH' et al. rather than 'CPATH', as discussed +at <http://bugs.gnu.org/22186>. + +diff --git a/gcc/gcc.c b/gcc/gcc.c +index eced0d5..08dec2b 100644 +--- a/gcc/gcc.c ++++ b/gcc/gcc.c +@@ -4317,7 +4317,7 @@ process_command (unsigned int decoded_options_count, + } + + temp = env.get (LIBRARY_PATH_ENV); +- if (temp && *cross_compile == '0') ++ if (temp) + { + const char *startp, *endp; + char *nstore = (char *) alloca (strlen (temp) + 3); +diff --git a/gcc/incpath.c b/gcc/incpath.c +index 98fe5ec..96aff65 100644 +--- a/gcc/incpath.c ++++ b/gcc/incpath.c +@@ -461,8 +461,8 @@ register_include_chains (cpp_reader *pfile, const char *sysroot, + int stdinc, int cxx_stdinc, int verbose) + { + static const char *const lang_env_vars[] = +- { "C_INCLUDE_PATH", "CPLUS_INCLUDE_PATH", +- "OBJC_INCLUDE_PATH", "OBJCPLUS_INCLUDE_PATH" }; ++ { "CROSS_C_INCLUDE_PATH", "CROSS_CPLUS_INCLUDE_PATH", ++ "CROSS_OBJC_INCLUDE_PATH", "CROSS_OBJCPLUS_INCLUDE_PATH" }; + cpp_options *cpp_opts = cpp_get_options (pfile); + size_t idx = (cpp_opts->objc ? 2: 0); + +@@ -473,7 +473,7 @@ register_include_chains (cpp_reader *pfile, const char *sysroot, + + /* CPATH and language-dependent environment variables may add to the + include chain. */ +- add_env_var_paths ("CPATH", BRACKET); ++ add_env_var_paths ("CROSS_CPATH", BRACKET); + add_env_var_paths (lang_env_vars[idx], SYSTEM); + + target_c_incpath.extra_pre_includes (sysroot, iprefix, stdinc); +diff --git a/gcc/system.h b/gcc/system.h +index 0cbf60a..3242c68 100644 +--- a/gcc/system.h ++++ b/gcc/system.h +@@ -1169,4 +1169,6 @@ helper_const_non_const_cast (const char *p) + /* Get definitions of HOST_WIDE_INT. */ + #include "hwint.h" + ++#define LIBRARY_PATH_ENV "CROSS_LIBRARY_PATH" ++ + #endif /* ! GCC_SYSTEM_H */ +diff --git a/gcc/tlink.c b/gcc/tlink.c +index a2a7db0..2d96872 100644 +--- a/gcc/tlink.c ++++ b/gcc/tlink.c +@@ -456,7 +456,7 @@ recompile_files (void) + file *f; + + putenv (xstrdup ("COMPILER_PATH=")); +- putenv (xstrdup ("LIBRARY_PATH=")); ++ putenv (xstrdup (LIBRARY_PATH_ENV "=")); + + while ((f = file_pop ()) != NULL) + { diff --git a/gnu/packages/patches/grantlee-merge-theme-dirs.patch b/gnu/packages/patches/grantlee-merge-theme-dirs.patch new file mode 100644 index 0000000000..96a15a387b --- /dev/null +++ b/gnu/packages/patches/grantlee-merge-theme-dirs.patch @@ -0,0 +1,163 @@ +Taken from nixpkgs, see +grantleetheme: merge themes across multiple prefixes +<https://github.com/NixOS/nixpkgs/commits/master/pkgs/applications/kde/grantleetheme/grantlee-merge-theme-dirs.patch> + + +diff --git a/src/grantleetheme.cpp b/src/grantleetheme.cpp +index 27d5bc8..8d43140 100644 +--- a/src/grantleetheme.cpp ++++ b/src/grantleetheme.cpp +@@ -46,7 +46,7 @@ ThemePrivate::ThemePrivate(const ThemePrivate &other) + , description(other.description) + , name(other.name) + , dirName(other.dirName) +- , absolutePath(other.absolutePath) ++ , absolutePaths(other.absolutePaths) + , author(other.author) + , email(other.email) + , loader(other.loader) +@@ -64,12 +64,15 @@ void ThemePrivate::setupEngine() + + void ThemePrivate::setupLoader() + { +- // Get the parent dir with themes, we set the theme directory separately +- QDir dir(absolutePath); +- dir.cdUp(); ++ QStringList templateDirs; ++ for (const QString& path : absolutePaths) { ++ QDir dir(path); ++ dir.cdUp(); ++ templateDirs << dir.absolutePath(); ++ } + + loader = QSharedPointer<GrantleeTheme::QtResourceTemplateLoader>::create(); +- loader->setTemplateDirs({ dir.absolutePath() }); ++ loader->setTemplateDirs(templateDirs); + loader->setTheme(dirName); + + if (!sEngine) { +@@ -121,7 +124,7 @@ Theme::Theme(const QString &themePath, const QString &dirName, const QString &de + KConfigGroup group(&config, QStringLiteral("Desktop Entry")); + if (group.isValid()) { + d->dirName = dirName; +- d->absolutePath = themePath; ++ d->absolutePaths = QStringList(themePath); + d->name = group.readEntry("Name", QString()); + d->description = group.readEntry("Description", QString()); + d->themeFileName = group.readEntry("FileName", QString()); +@@ -140,7 +143,7 @@ Theme::~Theme() + + bool Theme::operator==(const Theme &other) const + { +- return isValid() && other.isValid() && d->absolutePath == other.absolutePath(); ++ return isValid() && other.isValid() && d->absolutePaths == other.absolutePaths(); + } + + Theme &Theme::operator=(const Theme &other) +@@ -184,7 +187,15 @@ QString Theme::dirName() const + + QString Theme::absolutePath() const + { +- return d->absolutePath; ++ if (! d->absolutePaths.isEmpty()) { ++ return d->absolutePaths.first(); ++ }; ++ return QString(); ++} ++ ++QStringList Theme::absolutePaths() const ++{ ++ return d->absolutePaths; + } + + QString Theme::author() const +@@ -223,6 +231,13 @@ QString Theme::render(const QString &templateName, const QVariantHash &data, con + return result; + } + ++void Theme::addThemeDir(const QString& path) ++{ ++ QDir dir(path); ++ dir.cdUp(); ++ d->absolutePaths << dir.absolutePath(); ++} ++ + void Theme::addPluginPath(const QString &path) + { + if (!ThemePrivate::sEngine) { +diff --git a/src/grantleetheme.h b/src/grantleetheme.h +index a25c27b..be38299 100644 +--- a/src/grantleetheme.h ++++ b/src/grantleetheme.h +@@ -48,11 +48,14 @@ public: + Q_REQUIRED_RESULT QStringList displayExtraVariables() const; + Q_REQUIRED_RESULT QString dirName() const; + Q_REQUIRED_RESULT QString absolutePath() const; ++ Q_REQUIRED_RESULT QStringList absolutePaths() const; + Q_REQUIRED_RESULT QString author() const; + Q_REQUIRED_RESULT QString authorEmail() const; + + Q_REQUIRED_RESULT QString render(const QString &templateName, const QVariantHash &data, const QByteArray &applicationDomain = QByteArray()); + ++ void addThemeDir(const QString&); ++ + static void addPluginPath(const QString &path); + + private: +diff --git a/src/grantleetheme_p.h b/src/grantleetheme_p.h +index eb73dcb..00510e9 100644 +--- a/src/grantleetheme_p.h ++++ b/src/grantleetheme_p.h +@@ -43,7 +43,7 @@ public: + QString description; + QString name; + QString dirName; +- QString absolutePath; ++ QStringList absolutePaths; + QString author; + QString email; + +diff --git a/src/grantleethememanager.cpp b/src/grantleethememanager.cpp +index 606d717..dc99041 100644 +--- a/src/grantleethememanager.cpp ++++ b/src/grantleethememanager.cpp +@@ -125,25 +125,18 @@ public: + + for (const QString &directory : qAsConst(themesDirectories)) { + QDirIterator dirIt(directory, QStringList(), QDir::AllDirs | QDir::NoDotAndDotDot); +- QStringList alreadyLoadedThemeName; + while (dirIt.hasNext()) { + dirIt.next(); + const QString dirName = dirIt.fileName(); + GrantleeTheme::Theme theme = q->loadTheme(dirIt.filePath(), dirName, defaultDesktopFileName); + if (theme.isValid()) { + QString themeName = theme.name(); +- if (alreadyLoadedThemeName.contains(themeName)) { +- int i = 2; +- const QString originalName(theme.name()); +- while (alreadyLoadedThemeName.contains(themeName)) { +- themeName = originalName + QStringLiteral(" (%1)").arg(i); +- ++i; +- } +- theme.d->name = themeName; ++ QMap<QString, GrantleeTheme::Theme>::iterator i = themes.find(dirName); ++ if (i != themes.end()) { ++ i.value().addThemeDir(dirIt.filePath()); ++ } else { ++ themes.insert(dirName, theme); + } +- alreadyLoadedThemeName << themeName; +- themes.insert(dirName, theme); +- //qDebug()<<" theme.name()"<<theme.name(); + } + } + watch->addDir(directory); +@@ -366,7 +359,7 @@ QString ThemeManager::pathFromThemes(const QString &themesRelativePath, const QS + GrantleeTheme::Theme theme = loadTheme(dirIt.filePath(), dirName, defaultDesktopFileName); + if (theme.isValid()) { + if (dirName == themeName) { +- return theme.absolutePath(); ++ return theme.absolutePaths().first(); + } + } + } diff --git a/gnu/packages/patches/hdf5-mpi-deprecations.patch b/gnu/packages/patches/hdf5-mpi-deprecations.patch deleted file mode 100644 index eb5d1cb681..0000000000 --- a/gnu/packages/patches/hdf5-mpi-deprecations.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/src/H5.c -+++ b/src/H5.c -@@ -138,7 +138,7 @@ - if (mpi_initialized && !mpi_finalized) { - int key_val; - -- if(MPI_SUCCESS != (mpi_code = MPI_Comm_create_keyval(MPI_NULL_COPY_FN, -+ if(MPI_SUCCESS != (mpi_code = MPI_Comm_create_keyval(MPI_COMM_NULL_COPY_FN, - (MPI_Comm_delete_attr_function *)H5_mpi_delete_cb, - &key_val, NULL))) - HMPI_GOTO_ERROR(FAIL, "MPI_Comm_create_keyval failed", mpi_code) ---- hdf5-1.10.4/testpar/t_cache.c -+++ hdf5-1.10.4/testpar/t_cache.c -@@ -1217,20 +1217,20 @@ - struct mssg_t sample; /* used to compute displacements */ - - /* setup the displacements array */ -- if ( ( MPI_SUCCESS != MPI_Address(&sample.req, &displs[0]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.src, &displs[1]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.dest, &displs[2]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.mssg_num, &displs[3]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.base_addr, &displs[4]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.len, &displs[5]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.ver, &displs[6]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.count, &displs[7]) ) || -- ( MPI_SUCCESS != MPI_Address(&sample.magic, &displs[8]) ) ) { -+ if ( ( MPI_SUCCESS != MPI_Get_address(&sample.req, &displs[0]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.src, &displs[1]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.dest, &displs[2]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.mssg_num, &displs[3]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.base_addr, &displs[4]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.len, &displs[5]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.ver, &displs[6]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.count, &displs[7]) ) || -+ ( MPI_SUCCESS != MPI_Get_address(&sample.magic, &displs[8]) ) ) { - - nerrors++; - success = FALSE; - if ( verbose ) { -- HDfprintf(stdout, "%d:%s: MPI_Address() call failed.\n", -+ HDfprintf(stdout, "%d:%s: MPI_Get_address() call failed.\n", - world_mpi_rank, FUNC); - } - -@@ -1245,14 +1245,14 @@ - - if ( success ) { - -- result = MPI_Type_struct(9, block_len, displs, mpi_types, &mpi_mssg_t); -+ result = MPI_Type_create_struct(9, block_len, displs, mpi_types, &mpi_mssg_t); - - if ( result != MPI_SUCCESS ) { - - nerrors++; - success = FALSE; - if ( verbose ) { -- HDfprintf(stdout, "%d:%s: MPI_Type_struct() call failed.\n", -+ HDfprintf(stdout, "%d:%s: MPI_Type_create_struct() call failed.\n", - world_mpi_rank, FUNC); - } - } diff --git a/gnu/packages/patches/kmplayer-aarch64.patch b/gnu/packages/patches/kmplayer-aarch64.patch new file mode 100644 index 0000000000..76f713be96 --- /dev/null +++ b/gnu/packages/patches/kmplayer-aarch64.patch @@ -0,0 +1,57 @@ +Index: b/src/moz-sdk/prcpucfg.h +=================================================================== +--- a/src/moz-sdk/prcpucfg.h ++++ b/src/moz-sdk/prcpucfg.h +@@ -288,6 +288,52 @@ + #define PR_BYTES_PER_WORD_LOG2 3 + #define PR_BYTES_PER_DWORD_LOG2 3 + ++#elif defined(__aarch64__) ++ ++#define IS_LITTLE_ENDIAN 1 ++#undef IS_BIG_ENDIAN ++#define IS_64 ++ ++#define PR_BYTES_PER_BYTE 1 ++#define PR_BYTES_PER_SHORT 2 ++#define PR_BYTES_PER_INT 4 ++#define PR_BYTES_PER_INT64 8 ++#define PR_BYTES_PER_LONG 8 ++#define PR_BYTES_PER_FLOAT 4 ++#define PR_BYTES_PER_DOUBLE 8 ++#define PR_BYTES_PER_WORD 8 ++#define PR_BYTES_PER_DWORD 8 ++ ++#define PR_BITS_PER_BYTE 8 ++#define PR_BITS_PER_SHORT 16 ++#define PR_BITS_PER_INT 32 ++#define PR_BITS_PER_INT64 64 ++#define PR_BITS_PER_LONG 64 ++#define PR_BITS_PER_FLOAT 32 ++#define PR_BITS_PER_DOUBLE 64 ++#define PR_BITS_PER_WORD 64 ++ ++#define PR_BITS_PER_BYTE_LOG2 3 ++#define PR_BITS_PER_SHORT_LOG2 4 ++#define PR_BITS_PER_INT_LOG2 5 ++#define PR_BITS_PER_INT64_LOG2 6 ++#define PR_BITS_PER_LONG_LOG2 6 ++#define PR_BITS_PER_FLOAT_LOG2 5 ++#define PR_BITS_PER_DOUBLE_LOG2 6 ++#define PR_BITS_PER_WORD_LOG2 6 ++ ++#define PR_ALIGN_OF_SHORT 2 ++#define PR_ALIGN_OF_INT 4 ++#define PR_ALIGN_OF_LONG 8 ++#define PR_ALIGN_OF_INT64 8 ++#define PR_ALIGN_OF_FLOAT 4 ++#define PR_ALIGN_OF_DOUBLE 8 ++#define PR_ALIGN_OF_POINTER 8 ++#define PR_ALIGN_OF_WORD 8 ++ ++#define PR_BYTES_PER_WORD_LOG2 3 ++#define PR_BYTES_PER_DWORD_LOG2 3 ++ + #elif defined(__mc68000__) + + #undef IS_LITTLE_ENDIAN diff --git a/gnu/packages/patches/kmplayer-upstream_Fix-build-with-Qt-5.9.patch b/gnu/packages/patches/kmplayer-upstream_Fix-build-with-Qt-5.9.patch new file mode 100644 index 0000000000..6a40dbe347 --- /dev/null +++ b/gnu/packages/patches/kmplayer-upstream_Fix-build-with-Qt-5.9.patch @@ -0,0 +1,42 @@ +From 3def65075c09af4961cd399e8e78ed78cca72e65 Mon Sep 17 00:00:00 2001 +From: Wolfgang Bauer <wbauer@tmo.at> +Date: Wed, 11 Oct 2017 22:16:02 +0200 +Subject: [PATCH] Fix build with Qt 5.9 + +Summary: +moc 5.9 errors out when building: +Error: Plugin Metadata file "" could not be opened: file to open is a directory + +Same issue and fix as https://phabricator.kde.org/D5392 for khtml. + +CCBUG: 377490 + +Test Plan: builds fine now with Qt 5.9.0rc and also earlier versions. + +Reviewers: vriezen, pino + +Reviewed By: pino + +Subscribers: pino + +Differential Revision: https://phabricator.kde.org/D5985 +--- + src/kmplayer_part.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/kmplayer_part.h b/src/kmplayer_part.h +index f90f85d..0fddbaa 100644 +--- a/src/kmplayer_part.h ++++ b/src/kmplayer_part.h +@@ -36,7 +36,7 @@ namespace KMPlayer { + + class KMPlayerFactory : public KPluginFactory { + Q_OBJECT +- Q_PLUGIN_METADATA(IID "org.kde.KPluginFactory" FILE "") ++ Q_PLUGIN_METADATA(IID "org.kde.KPluginFactory") + Q_INTERFACES(KPluginFactory) + public: + KMPlayerFactory(); +-- +2.14.2 + diff --git a/gnu/packages/patches/libgeotiff-adapt-test-script-for-proj-6.2.patch b/gnu/packages/patches/libgeotiff-adapt-test-script-for-proj-6.2.patch new file mode 100644 index 0000000000..746610c095 --- /dev/null +++ b/gnu/packages/patches/libgeotiff-adapt-test-script-for-proj-6.2.patch @@ -0,0 +1,63 @@ +From 678ffd97db2d63cf6856428bea65a93e069f812f Mon Sep 17 00:00:00 2001 +From: Even Rouault <even.rouault@spatialys.com> +Date: Wed, 4 Sep 2019 16:11:37 +0200 +Subject: [PATCH 1/2] Adapt test script for PROJ 6.2 EPSG database (fixes #22) + +--- + libgeotiff/test/testlistgeo | 8 +++++++- + libgeotiff/test/testlistgeo_out.dist | 4 ++-- + 2 files changed, 9 insertions(+), 3 deletions(-) + +diff --git a/libgeotiff/test/testlistgeo b/libgeotiff/test/testlistgeo +index 7fb4a2f..571f5d0 100755 +--- a/test/testlistgeo ++++ b/test/testlistgeo +@@ -210,10 +210,15 @@ echo "Testing listgeo equidistant_cylindrical.tif" >> ${OUT} + $EXE ${DATA_DIR}/equidistant_cylindrical.tif >>${OUT} + echo "" >>${OUT} + ++# Normalize for results depending on the exact version of PROJ / EPSG database ++sed "s/ETRS89-extended/ETRS89/g" < ${OUT} > ${OUT}.tmp ++mv ${OUT}.tmp ${OUT} ++ ++sed "s/ETRS89-extended/ETRS89/g" < ${TEST_CLI_DIR}/testlistgeo_out.dist > testlistgeo_out.dist.tmp + + # do 'diff' with distribution results + echo "diff ${OUT} with testlistgeo_out.dist" +-diff -u ${OUT} ${TEST_CLI_DIR}/testlistgeo_out.dist ++diff -u ${OUT} testlistgeo_out.dist.tmp + if [ $? -ne 0 ] ; then + echo "" + echo "PROBLEMS HAVE OCCURRED" +@@ -224,6 +229,7 @@ else + echo "TEST OK" + echo "test file ${OUT} removed" + echo ++ rm testlistgeo_out.dist.tmp + /bin/rm -f ${OUT} + exit 0 + fi +diff --git a/libgeotiff/test/testlistgeo_out.dist b/libgeotiff/test/testlistgeo_out.dist +index 68a948c..c157f00 100644 +--- a/test/testlistgeo_out.dist ++++ b/test/testlistgeo_out.dist +@@ -1738,11 +1738,11 @@ Geotiff_Information: + Keyed_Information: + GTModelTypeGeoKey (Short,1): ModelTypeProjected + GTRasterTypeGeoKey (Short,1): RasterPixelIsArea +- ProjectedCSTypeGeoKey (Short,1): Code-3035 (ETRS89 / LAEA Europe) ++ ProjectedCSTypeGeoKey (Short,1): Code-3035 (ETRS89-extended / LAEA Europe) + End_Of_Keys. + End_Of_Geotiff. + +-PCS = 3035 (ETRS89 / LAEA Europe) ++PCS = 3035 (ETRS89-extended / LAEA Europe) + Projection = 19986 (Europe Equal Area 2001) + Projection Method: CT_LambertAzimEqualArea + ProjCenterLatGeoKey: 52.000000 ( 52d 0' 0.00"N) + +From 15af10648c4cb7b4c55cbe08caaf9884c1d156d9 Mon Sep 17 00:00:00 2001 +From: Even Rouault <even.rouault@spatialys.com> +Date: Wed, 4 Sep 2019 19:13:11 +0200 +Subject: [PATCH 2/2] appveyor.yml: build vcpkg from source to fix issue with + VS2015 diff --git a/gnu/packages/patches/libnftnl-dont-check-NFTNL_FLOWTABLE_SIZE.patch b/gnu/packages/patches/libnftnl-dont-check-NFTNL_FLOWTABLE_SIZE.patch new file mode 100644 index 0000000000..df0571bf2b --- /dev/null +++ b/gnu/packages/patches/libnftnl-dont-check-NFTNL_FLOWTABLE_SIZE.patch @@ -0,0 +1,47 @@ +From: Tobias Geerinckx-Rice <me@tobias.gr> +Date: Tue, 10 Dec 2019 16:20:40 +0100 +Subject: gnu: libnftnl: Don't check NFTNL_FLOWTABLE_SIZE. + +Taken verbatim from the upstream commit[0] directly following the 1.1.5 +release. + +[0]: https://git.netfilter.org/libnftnl/commit/?id=b2388765e0c4405442faa13845419f6a35d0134c + +From b2388765e0c4405442faa13845419f6a35d0134c Mon Sep 17 00:00:00 2001 +From: Phil Sutter <phil@nwl.cc> +Date: Mon, 2 Dec 2019 18:29:56 +0100 +Subject: tests: flowtable: Don't check NFTNL_FLOWTABLE_SIZE + +Marshalling code around that attribute has been dropped by commit +d1c4b98c733a5 ("flowtable: remove NFTA_FLOWTABLE_SIZE") so it's value is +lost during the test. + +Assuming that NFTNL_FLOWTABLE_SIZE will receive kernel support at a +later point, leave the test code in place but just comment it out. + +Fixes: d1c4b98c733a5 ("flowtable: remove NFTA_FLOWTABLE_SIZE") +Signed-off-by: Phil Sutter <phil@nwl.cc> +Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> +--- + tests/nft-flowtable-test.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/tests/nft-flowtable-test.c b/tests/nft-flowtable-test.c +index 3edb00d..8ab8d4c 100644 +--- a/tests/nft-flowtable-test.c ++++ b/tests/nft-flowtable-test.c +@@ -33,9 +33,11 @@ static void cmp_nftnl_flowtable(struct nftnl_flowtable *a, struct nftnl_flowtabl + if (nftnl_flowtable_get_u32(a, NFTNL_FLOWTABLE_USE) != + nftnl_flowtable_get_u32(b, NFTNL_FLOWTABLE_USE)) + print_err("Flowtable use mismatches"); ++#if 0 + if (nftnl_flowtable_get_u32(a, NFTNL_FLOWTABLE_SIZE) != + nftnl_flowtable_get_u32(b, NFTNL_FLOWTABLE_SIZE)) + print_err("Flowtable size mismatches"); ++#endif + if (nftnl_flowtable_get_u32(a, NFTNL_FLOWTABLE_FLAGS) != + nftnl_flowtable_get_u32(b, NFTNL_FLOWTABLE_FLAGS)) + print_err("Flowtable flags mismatches"); +-- +cgit v1.2.1 + diff --git a/gnu/packages/patches/linux-libre-active-entropy.patch b/gnu/packages/patches/linux-libre-active-entropy.patch deleted file mode 100644 index 8f081f4a19..0000000000 --- a/gnu/packages/patches/linux-libre-active-entropy.patch +++ /dev/null @@ -1,86 +0,0 @@ -Try to actively add entropy instead of waiting forever. -Fixes <https://bugs.gnu.org/37501>. - -Taken from upstream: -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/patch/?id=50ee7529ec4500c88f8664560770a7a1b65db72b - -diff --git a/drivers/char/random.c b/drivers/char/random.c -index 5d5ea4ce1442..2fda6166c1dd 100644 ---- a/drivers/char/random.c -+++ b/drivers/char/random.c -@@ -1731,6 +1731,56 @@ void get_random_bytes(void *buf, int nbytes) - } - EXPORT_SYMBOL(get_random_bytes); - -+ -+/* -+ * Each time the timer fires, we expect that we got an unpredictable -+ * jump in the cycle counter. Even if the timer is running on another -+ * CPU, the timer activity will be touching the stack of the CPU that is -+ * generating entropy.. -+ * -+ * Note that we don't re-arm the timer in the timer itself - we are -+ * happy to be scheduled away, since that just makes the load more -+ * complex, but we do not want the timer to keep ticking unless the -+ * entropy loop is running. -+ * -+ * So the re-arming always happens in the entropy loop itself. -+ */ -+static void entropy_timer(struct timer_list *t) -+{ -+ credit_entropy_bits(&input_pool, 1); -+} -+ -+/* -+ * If we have an actual cycle counter, see if we can -+ * generate enough entropy with timing noise -+ */ -+static void try_to_generate_entropy(void) -+{ -+ struct { -+ unsigned long now; -+ struct timer_list timer; -+ } stack; -+ -+ stack.now = random_get_entropy(); -+ -+ /* Slow counter - or none. Don't even bother */ -+ if (stack.now == random_get_entropy()) -+ return; -+ -+ timer_setup_on_stack(&stack.timer, entropy_timer, 0); -+ while (!crng_ready()) { -+ if (!timer_pending(&stack.timer)) -+ mod_timer(&stack.timer, jiffies+1); -+ mix_pool_bytes(&input_pool, &stack.now, sizeof(stack.now)); -+ schedule(); -+ stack.now = random_get_entropy(); -+ } -+ -+ del_timer_sync(&stack.timer); -+ destroy_timer_on_stack(&stack.timer); -+ mix_pool_bytes(&input_pool, &stack.now, sizeof(stack.now)); -+} -+ - /* - * Wait for the urandom pool to be seeded and thus guaranteed to supply - * cryptographically secure random numbers. This applies to: the /dev/urandom -@@ -1745,7 +1795,17 @@ int wait_for_random_bytes(void) - { - if (likely(crng_ready())) - return 0; -- return wait_event_interruptible(crng_init_wait, crng_ready()); -+ -+ do { -+ int ret; -+ ret = wait_event_interruptible_timeout(crng_init_wait, crng_ready(), HZ); -+ if (ret) -+ return ret > 0 ? 0 : ret; -+ -+ try_to_generate_entropy(); -+ } while (!crng_ready()); -+ -+ return 0; - } - EXPORT_SYMBOL(wait_for_random_bytes); - diff --git a/gnu/packages/patches/mumble-1.2.19-abs.patch b/gnu/packages/patches/mumble-1.2.19-abs.patch deleted file mode 100644 index 683325f4bc..0000000000 --- a/gnu/packages/patches/mumble-1.2.19-abs.patch +++ /dev/null @@ -1,31 +0,0 @@ -From ea861fe86743c8402bbad77d8d1dd9de8dce447e Mon Sep 17 00:00:00 2001 -From: Mikkel Krautz <mikkel@krautz.dk> -Date: Fri, 29 Dec 2017 14:47:25 +0100 -Subject: [PATCH] AudioOutput: do not use non-existant template version of - std::abs. - -This change fixes AudioOutput to use the float overload of std::abs: - - float std::abs(float); - -instead of a non-existant template version (for newer Boost 1.66). - -Fixes mumble-voip/mumble#3281 - ---- - src/mumble/AudioOutput.cpp | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/src/mumble/AudioOutput.cpp b/src/mumble/AudioOutput.cpp -index cbe0c0e2b..7a0a5e2ab 100644 ---- a/src/mumble/AudioOutput.cpp -+++ b/src/mumble/AudioOutput.cpp -@@ -437,7 +437,7 @@ bool AudioOutput::mix(void *outbuff, unsigned int nsamp) { - top[2] = 0.0f; - } - -- if (std::abs<float>(front[0] * top[0] + front[1] * top[1] + front[2] * top[2]) > 0.01f) { -+ if (std::abs(front[0] * top[0] + front[1] * top[1] + front[2] * top[2]) > 0.01f) { - // Not perpendicular. Assume Y up and rotate 90 degrees. - - float azimuth = 0.0f; diff --git a/gnu/packages/photo.scm b/gnu/packages/photo.scm index f6d86f0857..0867433245 100644 --- a/gnu/packages/photo.scm +++ b/gnu/packages/photo.scm @@ -361,7 +361,7 @@ photographic equipment.") (define-public darktable (package (name "darktable") - (version "2.6.2") + (version "2.6.3") (source (origin (method url-fetch) @@ -369,27 +369,25 @@ photographic equipment.") "https://github.com/darktable-org/darktable/releases/" "download/release-" version "/darktable-" version ".tar.xz")) (sha256 - (base32 "0igvgyd042j7hm4y8fcm6dc1qqjs4d1r7y6f0pzpa0x416xyzfcw")))) + (base32 "1w3q3dhcxa0bs590zbsj61ap8z84wmn04xs5q3gjwisqhjf9j655")))) (build-system cmake-build-system) (arguments `(#:tests? #f ; there are no tests #:configure-flags '("-DBINARY_PACKAGE_BUILD=On") - #:make-flags - (list - (string-append "CPATH=" (assoc-ref %build-inputs "ilmbase") - "/include/OpenEXR:" (or (getenv "CPATH") ""))) #:phases (modify-phases %standard-phases - (add-before 'configure 'set-ldflags - (lambda* (#:key outputs #:allow-other-keys) + (add-before 'configure 'set-LDFLAGS-and-CPATH + (lambda* (#:key inputs outputs #:allow-other-keys) (setenv "LDFLAGS" (string-append "-Wl,-rpath=" (assoc-ref outputs "out") "/lib/darktable")) + + ;; Ensure the OpenEXR headers are found. + (setenv "CPATH" + (string-append (assoc-ref inputs "ilmbase") + "/include/OpenEXR:" (or (getenv "CPATH") ""))) #t))))) - (native-inputs - `(("llvm" ,llvm-3.9.1) - ("clang" ,clang-3.9.1))) (inputs `(("libxslt" ,libxslt) ("libxml2" ,libxml2) diff --git a/gnu/packages/php.scm b/gnu/packages/php.scm index c74f492671..a82257c582 100644 --- a/gnu/packages/php.scm +++ b/gnu/packages/php.scm @@ -59,7 +59,7 @@ (define-public php (package (name "php") - (version "7.4.0") + (version "7.4.1") (home-page "https://secure.php.net/") (source (origin (method url-fetch) @@ -67,7 +67,7 @@ "php-" version ".tar.xz")) (sha256 (base32 - "0hpc425lzh3h3nzigi4w5ndzj1sz5ppj7gqykgmc2v2x1sr53dwv")) + "0qn7zwf2jzj3h7p4b1l79lf9gv236mycwkhgw15hj2fmpmkbh6sn")) (modules '((guix build utils))) (snippet '(with-directory-excursion "ext" diff --git a/gnu/packages/python-crypto.scm b/gnu/packages/python-crypto.scm index af51ae04b6..63d3be17c2 100644 --- a/gnu/packages/python-crypto.scm +++ b/gnu/packages/python-crypto.scm @@ -232,16 +232,24 @@ Python interface around SSH networking concepts.") (define-public python-ecdsa (package (name "python-ecdsa") - (version "0.13.3") + (version "0.14.1") (source (origin (method url-fetch) (uri (pypi-uri "ecdsa" version)) (sha256 - (base32 "0k9xxklf865g6x43gkfarwb25ffrkmpvkzkh71rylqx7cjq80g0n")))) + (base32 "13nx5cbfxc0gnax5zwdmp9xc40qd1llk62mv85jyrvqkbw017ik4")))) (build-system python-build-system) - (inputs - `(("openssl" ,openssl))) + (arguments + '(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ (invoke "pytest")))))) + (propagated-inputs + `(("python-six" ,python-six))) + (native-inputs + `(("openssl" ,openssl) + ("python-pytest" ,python-pytest))) (home-page "https://github.com/warner/python-ecdsa") (synopsis "ECDSA cryptographic signature library (pure python)") (description diff --git a/gnu/packages/python-web.scm b/gnu/packages/python-web.scm index 1632d7ade5..179e64e0a1 100644 --- a/gnu/packages/python-web.scm +++ b/gnu/packages/python-web.scm @@ -2532,14 +2532,14 @@ CSS tidy. Also supports URL rewriting in CSS files.") (define-public python-elasticsearch (package (name "python-elasticsearch") - (version "6.1.1") + (version "7.1.0") (source (origin (method url-fetch) (uri (pypi-uri "elasticsearch" version)) (sha256 (base32 - "1kjxl45yvvgfb5fmamx0kfsfg9pzphiqrwbkns3s28r1w7ya74cd")))) + "0rnjvlhw4v3vg14l519qliy1s1zpmx3827q0xfviwvk42rr7hh01")))) (build-system python-build-system) (native-inputs `(("python-mock" ,python-mock) diff --git a/gnu/packages/python-xyz.scm b/gnu/packages/python-xyz.scm index 75b8a4cc08..574c596e5f 100644 --- a/gnu/packages/python-xyz.scm +++ b/gnu/packages/python-xyz.scm @@ -57,7 +57,7 @@ ;;; Copyright © 2018, 2019 Maxim Cournoyer <maxim.cournoyer@gmail.com> ;;; Copyright © 2018 Luther Thompson <lutheroto@gmail.com> ;;; Copyright © 2018 Vagrant Cascadian <vagrant@debian.org> -;;; Copyright © 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2019 Sam <smbaines8@gmail.com> ;;; Copyright © 2019 Jack Hill <jackhill@jackhill.us> ;;; Copyright © 2019 Guillaume Le Vaillant <glv@posteo.net> @@ -67,6 +67,7 @@ ;;; Copyright © 2019 Giacomo Leidi <goodoldpaul@autistici.org> ;;; Copyright © 2019 Wiktor Żelazny <wzelazny@vurv.cz> ;;; Copyright © 2019 Tanguy Le Carrour <tanguy@bioneland.org> +;;; Copyright © 2019 Mădălin Ionel Patrașcu <madalinionel.patrascu@mdc-berlin.de> ;;; ;;; This file is part of GNU Guix. ;;; @@ -1051,21 +1052,21 @@ standard.") (define-public python-eventlet (package (name "python-eventlet") - (version "0.20.1") + (version "0.25.1") (source (origin (method url-fetch) (uri (pypi-uri "eventlet" version)) (sha256 (base32 - "0f3q55mq4n021wb7qa53pz3ix6i2py64sap66vsaqm2scjw83m9s")))) + "1hgz8jq19wlz8vwqj900ry8cjv578nz4scc91mlc8944yid6573c")))) (build-system python-build-system) (propagated-inputs `(("python-greenlet" ,python-greenlet))) (arguments ;; TODO: Requires unpackaged 'enum-compat'. '(#:tests? #f)) - (home-page "http://eventlet.net") + (home-page "https://eventlet.net") (synopsis "Concurrent networking library for Python") (description "Eventlet is a concurrent networking library for Python that @@ -3145,42 +3146,30 @@ interested parties to subscribe to events, or \"signals\".") (define-public pelican (package (name "pelican") - (version "4.0.1") + (version "4.2.0") (source (origin (method url-fetch) (uri (pypi-uri "pelican" version)) (sha256 (base32 - "05yda7n6r0ll18fpdjzkzyr0ls8hbb86fnjyb33k9jvv5avah2lr")))) + "0mp7hjyhs38ag1hyfcy882g400z0babqi72pnli46dqijfhajzmy")))) (build-system python-build-system) (propagated-inputs - `(("python-feedgenerator" ,python-feedgenerator) + `(("python-blinker" ,python-blinker) + ("python-dateutil" ,python-dateutil) + ("python-docutils" ,python-docutils) + ("python-feedgenerator" ,python-feedgenerator) ("python-jinja2" ,python-jinja2) + ("python-markdown" ,python-markdown) ("python-pygments" ,python-pygments) - ("python-docutils" ,python-docutils) ("python-pytz" ,python-pytz) - ("python-blinker" ,python-blinker) - ("python-unidecode" ,python-unidecode) ("python-six" ,python-six) - ("python-dateutil" ,python-dateutil) - ("python-markdown" ,python-markdown))) + ("python-unidecode" ,python-unidecode))) (home-page "https://getpelican.com/") (arguments `(;; XXX Requires a lot more packages to do unit tests :P - #:tests? #f - #:phases (modify-phases %standard-phases - (add-before - 'install 'adjust-requires - ;; Since feedgenerator is installed from git, it doesn't - ;; conform to the version requirements. - ;; - ;; We *do have* "feedgenerator >= 1.6", but strip off the - ;; version requirement so setuptools doesn't get confused. - (lambda _ - (substitute* "setup.py" - (("['\"]feedgenerator.*?['\"]") - "'feedgenerator'"))))))) + #:tests? #f)) (synopsis "Python-based static site publishing system") (description "Pelican is a tool to generate a static blog from reStructuredText, @@ -6331,21 +6320,26 @@ so it might be a tiny bit slower.") (define-public python-waf (package (name "python-waf") - (version "2.0.11") + (version "2.0.19") (source (origin (method url-fetch) (uri (string-append "https://waf.io/" "waf-" version ".tar.bz2")) (sha256 (base32 - "13zrniwkmfqgsgzi9v5m1367fppp9yzrz6z2ny6hy8dmpb8mj4z4")))) + "19dvqbsvxz7ch03dh1v0znklrwxlz6yzddc3k9smzrrgny4jch6q")))) (build-system python-build-system) (arguments '(#:phases (modify-phases %standard-phases (replace 'build (lambda _ - (invoke "python" "waf-light" "configure" "build"))) + ;; XXX: Find a way to add all extra tools. + (let ((tools '("gccdeps" + "clang_compilation_database"))) + (invoke "python" "waf-light" "configure" "build" + (string-append "--tools=" + (string-join tools ",")))))) (replace 'check (lambda _ (invoke "python" "waf" "--version"))) @@ -6817,7 +6811,7 @@ add functionality and customization to your projects with their own plugins.") `(("unzip" ,unzip) ("python-pytest" ,python-pytest) ("python-pytest-runner" ,python-pytest-runner))) - (home-page "https://github.com/behdad/fonttools") + (home-page "https://github.com/fonttools/fonttools") (synopsis "Tools to manipulate font files") (description "FontTools/TTX is a library to manipulate font files from Python. It @@ -8522,13 +8516,13 @@ with a new public API, and RPython support.") (define-public python-hy (package (name "python-hy") - (version "0.13.0") + (version "0.17.0") (source (origin (method url-fetch) (uri (pypi-uri "hy" version)) (sha256 (base32 - "19sfymaksx9jhksfnb15ahid46mzrhdfzz6yy2craz2qnzvpmky8")))) + "1gdbqsirsdxj320wnp7my5awzs1kfs6m4fqmkzbd1zd47qzj0zfi")))) (build-system python-build-system) (arguments '(#:phases @@ -8547,7 +8541,11 @@ with a new public API, and RPython support.") (propagated-inputs `(("python-astor" ,python-astor) ("python-clint" ,python-clint) - ("python-rply" ,python-rply))) + ("python-rply" ,python-rply) + ("python-fastentrypoints" + ,python-fastentrypoints) + ("python-funcparserlib" + ,python-funcparserlib))) (home-page "http://hylang.org/") (synopsis "Lisp frontend to Python") (description @@ -11011,14 +11009,14 @@ relays publish about themselves.") (define-public python-pyserial (package (name "python-pyserial") - (version "3.1.1") + (version "3.4") (source (origin (method url-fetch) (uri (pypi-uri "pyserial" version)) (sha256 (base32 - "0k1nfdrxxkdlv4zgaqsdv8li0pj3gbh2pyxw8q2bsg6f9490amyn")))) + "09y68bczw324a4jb9a1cfwrbjhq179vnfkkkrybbksp0vqgl0bbf")))) (build-system python-build-system) (arguments '(#:tests? #f)) ; FIXME: 3/49 tests are failing. @@ -14337,24 +14335,15 @@ such as figshare or Zenodo.") (define-public python-semver (package (name "python-semver") - (version "2.7.9") + (version "2.9.0") (source - (origin - (method url-fetch) - (uri (pypi-uri "semver" version)) - (sha256 - (base32 - "0hhgqppchv59rqj0yzi1prdg2nfsywqmjsqy2rycyxm0hvxmbyqz")))) + (origin + (method url-fetch) + (uri (pypi-uri "semver" version)) + (sha256 + (base32 + "183kg1rhzz3hqizvphkd8hlbf1zxfx8737zhfkmqzxi71jmdw7pd")))) (build-system python-build-system) - (arguments - `(#:phases - (modify-phases %standard-phases - (add-after 'unpack 'patch-test-requirements - (lambda _ - (substitute* "setup.py" - ;; Our Python is new enough. - (("'virtualenv<14\\.0\\.0'") "'virtualenv'")) - #t))))) (native-inputs `(("python-tox" ,python-tox) ("python-virtualenv" ,python-virtualenv))) @@ -14574,14 +14563,14 @@ user's @file{~/Trash} directory.") (define-public python-yapf (package (name "python-yapf") - (version "0.24.0") + (version "0.29.0") (source (origin (method url-fetch) (uri (pypi-uri "yapf" version)) (sha256 (base32 - "0anwby0ydmyzcsgjc5dn1ryddwvii4dq61vck447q0n96npnzfyf")))) + "1pj3xzblmbssshi889b6n9hwqbjpabw6j0fimlng2sshd3226bki")))) (build-system python-build-system) (home-page "https://github.com/google/yapf") (synopsis "Formatter for Python code") @@ -15562,14 +15551,14 @@ validation testing and application logic.") (define-public python-numba (package (name "python-numba") - (version "0.42.0") + (version "0.46.0") (source (origin (method url-fetch) (uri (pypi-uri "numba" version)) (sha256 (base32 - "03rqdfx0512lcri2bcpngx5k3jwfbqnanqj3n19c7d6h6hqxvq9x")))) + "1vnfzcq6fcnkmdms6114d49awvvj5181fl7z1wlha27qc2paxjy2")))) (build-system python-build-system) (arguments `(#:modules ((guix build utils) @@ -15586,7 +15575,7 @@ validation testing and application logic.") #t)) (add-after 'unpack 'remove-failing-tests (lambda _ - ;; FIXME: these tests fail for unknown reasons: + ;; FIXME: These tests fail for unknown reasons: ;; test_non_writable_pycache, test_non_creatable_pycache, and ;; test_frozen (all in numba.tests.test_dispatcher.TestCache). (substitute* "numba/tests/test_dispatcher.py" @@ -15599,10 +15588,20 @@ validation testing and application logic.") ;; These tests fail because we don't run the tests from the build ;; directory: test_setup_py_distutils, test_setup_py_setuptools - ;; They ar in numba.tests.test_pycc.TestDistutilsSupport. + ;; They are in numba.tests.test_pycc.TestDistutilsSupport. (substitute* "numba/tests/test_pycc.py" (("def test(_setup_py_distutils|_setup_py_setuptools)" _ m) (string-append "def guix_skip" m))) + + ;; These tests fail because our version of Python does not have + ;; a recognizable front-end for the Numba distribution to use + ;; to check against. + (substitute* "numba/tests/test_entrypoints.py" + (("def test(_init_entrypoint)" _ m) + (string-append "def guix_skip" m))) + (substitute* "numba/tests/test_jitclasses.py" + (("def test(_jitclass_longlabel_not_truncated)" _ m) + (string-append "def guix_skip" m))) #t)) (replace 'check (lambda _ @@ -15669,17 +15668,25 @@ object-oriented library such as @code{scikit-learn}.") (define-public python-dill (package (name "python-dill") - (version "0.2.9") + (version "0.3.1.1") (source (origin (method url-fetch) (uri (pypi-uri "dill" version)) (sha256 - (base32 "0vwqyi6hyz2r29zydc78dqymkbc5y7gia16xcdh215cikxph9mpn")))) + (base32 "1704g8z70d210ksgbccs2v545v9w0wc6lx15m296alb7jf0yzn22")))) (build-system python-build-system) - ;; FIXME: The check phase fails with "don't know how to make test from: …". - (arguments '(#:tests? #f)) - (home-page "https://pypi.org/project/dill") + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + (with-directory-excursion "/tmp" + (invoke "nosetests" "-v")) + #t))))) + (native-inputs + `(("python-nose" ,python-nose))) + (home-page "https://pypi.org/project/dill/") (synopsis "Serialize all of Python") (description "Dill extends Python's @code{pickle} module for serializing and de-serializing Python objects to the majority of the built-in Python @@ -15695,18 +15702,38 @@ the saved state of the original interpreter session.") (define-public python-multiprocess (package (name "python-multiprocess") - (version "0.70.6.1") + (version "0.70.9") (source (origin (method url-fetch) (uri (pypi-uri "multiprocess" version)) (sha256 (base32 - "1ip5caz67b3q0553mr8gm8xwsb8x500jn8ml0gihgyfy52m2ypcq")))) + "1r882nvd44xqwbrclwqx5rhs80l6809rcvpc7pkpgnij06cvvmcz")))) (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'disable-broken-tests + (lambda _ + ;; This test is broken as there is no keyboard interrupt. + (substitute* "py3.7/multiprocess/tests/__init__.py" + (("^(.*)def test_wait_result" + line indent) + (string-append indent + "@unittest.skip(\"Disabled by Guix\")\n" + line))) + #t)) + ;; Tests must be run after installation. + (delete 'check) + (add-after 'install 'check + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "python" "-m" "multiprocess.tests") + #t))))) (propagated-inputs `(("python-dill" ,python-dill))) - (home-page "https://pypi.org/project/multiprocess") + (home-page "https://pypi.org/project/multiprocess/") (synopsis "Multiprocessing and multithreading in Python") (description "This package is a fork of the multiprocessing Python package, a package @@ -15908,41 +15935,63 @@ append on old values. Partd excels at shuffling operations.") (define-public python2-partd (package-with-python2 python-partd)) +(define-public python-fsspec + (package + (name "python-fsspec") + (version "0.6.1") + (source + (origin + (method url-fetch) + (uri (pypi-uri "fsspec" version)) + (sha256 + (base32 + "1g9ba8v04s1nrh7pvzfm2md7ivl2mrz3hcq3y9d1a44gd62h17zj")))) + (build-system python-build-system) + (arguments '(#:tests? #f)) ; there are none + (home-page "https://github.com/intake/filesystem_spec") + (synopsis "File-system specification") + (description "The purpose of this package is to produce a template or +specification for a file-system interface, that specific implementations +should follow, so that applications making use of them can rely on a common +behavior and not have to worry about the specific internal implementation +decisions with any given backend.") + (license license:bsd-3))) + (define-public python-dask (package (name "python-dask") - (version "1.2.2") + (version "2.9.0") (source (origin (method url-fetch) (uri (pypi-uri "dask" version)) (sha256 - (base32 "0b29gvf96gmp20wicly3v3mhyc93zbm3mdv935fka6x0wax7cy2y")))) + (base32 "1w1hqr8vyx6ygwflj2737dcy0mmgvrc0s602gnny8pzlcbs9m76b")))) (build-system python-build-system) - ;; A single test out of 5000+ fails. This test is marked as xfail when - ;; pytest-xdist is used. (arguments `(#:phases (modify-phases %standard-phases - (add-after 'unpack 'disable-broken-test + (add-after 'unpack 'disable-broken-tests (lambda _ + ;; This test is marked as xfail when pytest-xdist is used. (substitute* "dask/tests/test_threaded.py" (("def test_interrupt\\(\\)" m) (string-append "@pytest.mark.skip(reason=\"Disabled by Guix\")\n" m))) - (when (which "python2") - ;; This test fails with recent Pandas: - ;; <https://github.com/dask/dask/issues/3794>. - (substitute* "dask/dataframe/tests/test_dataframe.py" - (("def test_info\\(\\)" m) - (string-append "@pytest.mark.skip(reason=\"Disabled by Guix\")\n" - m)))) + ;; This one fails with a type error: + ;; TypeError: Already tz-aware, use tz_convert to convert. + (substitute* "dask/dataframe/tests/test_shuffle.py" + (("def test_set_index_timestamp\\(\\)" m) + (string-append "@pytest.mark.skip(reason=\"Disabled by Guix\")\n" + m))) #t)) (replace 'check (lambda _ (invoke "pytest" "-vv")))))) (propagated-inputs `(("python-cloudpickle" ,python-cloudpickle) + ("python-fsspec" ,python-fsspec) ("python-numpy" ,python-numpy) + ("python-packaging" ,python-packaging) ("python-pandas" ,python-pandas) ("python-partd" ,python-partd) ("python-toolz" ,python-toolz) @@ -15961,9 +16010,6 @@ larger-than-memory or distributed environments. These parallel collections run on top of the dynamic task schedulers. ") (license license:bsd-3))) -(define-public python2-dask - (package-with-python2 python-dask)) - (define-public python-ilinkedlist (package (name "python-ilinkedlist") @@ -16805,3 +16851,274 @@ services to what you expect in your tests.") (define-public python2-ujson (package-with-python2 python-ujson)) + +(define-public python-iocapture + ;; The latest release is more than a year older than this commit. + (let ((commit "fdc021c431d0840303908dfc3ca8769db383595c") + (revision "1")) + (package + (name "python-iocapture") + (version "0.1.2") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/oinume/iocapture.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1mkbhqibxvgwg0p7slr8dfraa3g2s6bsayladhax2jccwj4kcndz")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (delete 'check) + (add-after 'install 'check + (lambda* (#:key inputs outputs #:allow-other-keys) + (add-installed-pythonpath inputs outputs) + (invoke "py.test" "-v" "tests") + #t))))) + (propagated-inputs + `(("python-flexmock" ,python-flexmock) + ("python-pytest" ,python-pytest) + ("python-pytest-cov" ,python-pytest-cov) + ("python-six" ,python-six))) + (home-page "https://github.com/oinume/iocapture") + (synopsis "Python capturing tool for stdout and stderr") + (description + "This package helps you to capture the standard out (stdout) and the +standard error channel (stderr) in your program.") + (license license:expat)))) + +(define-public python-argh + ;; There are 21 commits since the latest release containing important + ;; improvements. + (let ((commit "dcd3253f2994400a6a58a700c118c53765bc50a4") + (revision "1")) + (package + (name "python-argh") + (version (git-version "0.26.2" revision commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/neithere/argh.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "1p5h3dnpbsjmqrvil96s71asc6i3gpinmbrabqmwnrsxprz7r3ns")))) + (build-system python-build-system) + (propagated-inputs + `(("python-iocapture" ,python-iocapture) + ("python-mock" ,python-mock) + ("python-pytest" ,python-pytest) + ("python-pytest-cov" ,python-pytest-cov) + ("python-pytest-xdist" ,python-pytest-xdist) + ("python-tox" ,python-tox))) + (home-page "https://github.com/neithere/argh/") + (synopsis "Argparse wrapper with natural syntax") + (description + "python-argh is a small library that provides several layers of +abstraction on top of @code{python-argparse}. The layers can be mixed. It is +always possible to declare a command with the highest possible (and least +flexible) layer and then tune the behaviour with any of the lower layers +including the native API of @code{python-argparse}.") + (license license:lgpl3+)))) + +(define-public python-ppft + (package + (name "python-ppft") + (version "1.6.6.1") + (source + (origin + (method url-fetch) + (uri (pypi-uri "ppft" version)) + (sha256 + (base32 + "1z1invkhszc5d2mvgr221v7cszzifcc77mz0pv3wjp6x5q2768cy")))) + (build-system python-build-system) + (arguments '(#:tests? #f)) ; there are none + (propagated-inputs + `(("python-six" ,python-six))) + (home-page "https://pypi.org/project/ppft/") + (synopsis "Fork of Parallel Python") + (description + "This package is a fork of Parallel Python. The Parallel Python +module (@code{pp}) provides an easy and efficient way to create +parallel-enabled applications for @dfn{symmetric multiprocessing} (SMP) +computers and clusters. It features cross-platform portability and dynamic +load balancing.") + (license license:bsd-3))) + +(define-public python-pox + (package + (name "python-pox") + (version "0.2.7") + (source + (origin + (method url-fetch) + (uri (pypi-uri "pox" version)) + (sha256 + (base32 + "0y17ckc2p6i6709s279sjdj4q459mpcc38ymg9zv9y6vl6jf3bq6")))) + (build-system python-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + (mkdir-p "/tmp/guix") + (setenv "SHELL" "bash") + (setenv "USERNAME" "guix") + (setenv "HOME" "/tmp/guix") ; must end on USERNAME... + (invoke "py.test" "-vv") + #t))))) + (native-inputs + `(("python-pytest" ,python-pytest) + ("which" ,which))) + (home-page "https://pypi.org/project/pox/") + (synopsis "Python utilities for filesystem exploration and automated builds") + (description + "Pox provides a collection of utilities for navigating and manipulating +filesystems. This module is designed to facilitate some of the low level +operating system interactions that are useful when exploring a filesystem on a +remote host. Pox provides Python equivalents of several shell commands such +as @command{which} and @command{find}. These commands allow automated +discovery of what has been installed on an operating system, and where the +essential tools are located.") + (license license:bsd-3))) + +(define-public python-pathos + (package + (name "python-pathos") + (version "0.2.5") + (source + (origin + (method url-fetch) + (uri (pypi-uri "pathos" version)) + (sha256 + (base32 + "0in8hxdz7k081ijn6q94gr39ycy7363sx4zysmbwyvd7snqjrbi1")))) + (build-system python-build-system) + (arguments + '(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + (setenv "PYTHONPATH" + (string-append (getcwd) ":" (getenv "PYTHONPATH"))) + (invoke "python" "./tests/__main__.py")))))) + (propagated-inputs + `(("python-dill" ,python-dill) + ("python-multiprocess" ,python-multiprocess) + ("python-pox" ,python-pox) + ("python-ppft" ,python-ppft))) + (native-inputs + `(("python-pytest" ,python-pytest))) + (home-page "https://pypi.org/project/pathos/") + (synopsis + "Parallel graph management and execution in heterogeneous computing") + (description + "Python-pathos is a framework for heterogenous computing. It provides a +consistent high-level interface for configuring and launching parallel +computations across heterogenous resources. Python-pathos provides configurable +launchers for parallel and distributed computing, where each launcher contains +the syntactic logic to configure and launch jobs in an execution environment.") + (license license:bsd-3))) + +(define-public python-flit + (package + (name "python-flit") + (version "2.1.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "flit" version)) + (sha256 + (base32 + "0h5vvmqinqzn97mr3ix7zx53af9ad4fimjjwqpx88yp8qhz4r5bc")))) + (build-system python-build-system) + (arguments + `(#:tests? #f)) ; XXX: Check requires network access. + (home-page "https://flit.readthedocs.io/") + (synopsis + "Simple packaging tool for simple packages") + (description + "Flit is a simple way to put Python packages and modules on PyPI. Flit +packages a single importable module or package at a time, using the import +name as the name on PyPI. All subpackages and data files within a package +are included automatically.") + (license license:bsd-3))) + +(define-public python-pathtools + (package + (name "python-pathtools") + (version "0.1.2") + (source + (origin + (method url-fetch) + (uri (pypi-uri "pathtools" version)) + (sha256 + (base32 + "1h7iam33vwxk8bvslfj4qlsdprdnwf8bvzhqh3jq5frr391cadbw")))) + (build-system python-build-system) + (home-page + "https://github.com/gorakhargosh/pathtools") + (synopsis "Path utilities for Python") + (description "Pattern matching and various utilities for file systems +paths.") + (license license:expat))) + +(define-public python-fastentrypoints + (package + (name "python-fastentrypoints") + (version "0.12") + (source + (origin + (method url-fetch) + (uri (pypi-uri "fastentrypoints" version)) + (sha256 + (base32 + "02s1j8i2dzbpbwgq2a3fiqwm3cnmhii2qzc0k42l0rdxd4a4ya7z")))) + (build-system python-build-system) + (home-page + "https://github.com/ninjaaron/fast-entry_points") + (synopsis + "Makes entry_points specified in setup.py load more quickly") + (description + "Using entry_points in your setup.py makes scripts that start really +slowly because it imports pkg_resources. This package allows such setup +scripts to load entry points more quickly.") + (license license:bsd-3))) + +(define-public python-funcparserlib + (package + (name "python-funcparserlib") + (version "0.3.6") + (source + (origin + (method url-fetch) + (uri (pypi-uri "funcparserlib" version)) + (sha256 + (base32 + "07f9cgjr3h4j2m67fhwapn8fja87vazl58zsj4yppf9y3an2x6dp")))) + (native-inputs + `(("python-tox" ,python-tox))) + (arguments + `(#:phases + (modify-phases %standard-phases + (replace 'check + (lambda _ + (invoke "tox")))))) + (build-system python-build-system) + (home-page + "https://github.com/vlasovskikh/funcparserlib") + (synopsis + "Recursive descent parsing library based on functional combinators") + (description + "This package is a recursive descent parsing library for Python based on +functional combinators. Parser combinators are just higher-order functions +that take parsers as their arguments and return them as result values.") + (license license:expat))) diff --git a/gnu/packages/qt.scm b/gnu/packages/qt.scm index d9da27717d..4036b27b4a 100644 --- a/gnu/packages/qt.scm +++ b/gnu/packages/qt.scm @@ -2107,8 +2107,7 @@ color-related widgets.") "0g8jacm2iqd7lw2m7f1dp1nnrsk38bl3m8pihm8zz9gxs8d31sf5")))) (build-system cmake-build-system) (inputs - `(("llvm-6" ,llvm-6) - ("clang-6" ,clang-6) + `(("clang-toolchain" ,clang-toolchain-6) ("libxml2" ,libxml2) ("libxslt" ,libxslt) ("python-wrapper" ,python-wrapper) @@ -2124,7 +2123,7 @@ color-related widgets.") (lambda _ (chdir "sources/shiboken2") #t)) (add-before 'configure 'set-build-env (lambda* (#:key inputs #:allow-other-keys) - (let ((llvm (assoc-ref inputs "llvm-6"))) + (let ((llvm (assoc-ref inputs "clang-toolchain"))) (setenv "CLANG_INSTALL_DIR" llvm) #t)))))) (home-page "https://wiki.qt.io/Qt_for_Python") @@ -2162,8 +2161,7 @@ color-related widgets.") `(("libcxx" ,libcxx-6) ("libxml2" ,libxml2) ("libxslt" ,libxslt) - ("llvm-6" ,llvm-6) - ("clang-6" ,clang-6) + ("clang-toolchain" ,clang-toolchain-6) ("qtbase" ,qtbase) ("qtdatavis3d" ,qtdatavis3d) ("qtlocation" ,qtlocation) @@ -2189,13 +2187,12 @@ color-related widgets.") ;; FIXME: Building tests fail. #:configure-flags '("-DBUILD_TESTS=FALSE") #:phases - (modify-phases - %standard-phases + (modify-phases %standard-phases (add-after 'unpack 'go-to-source-dir (lambda _ (chdir "sources/pyside2") #t)) (add-before 'configure 'set-clang-dir (lambda* (#:key inputs #:allow-other-keys) - (let ((clang (assoc-ref inputs "clang-6")) + (let ((clang (assoc-ref inputs "clang-toolchain")) (libcxx (assoc-ref inputs "libcxx"))) (setenv "CLANG_INSTALL_DIR" clang) (substitute* "cmake/Macros/PySideModules.cmake" diff --git a/gnu/packages/rails.scm b/gnu/packages/rails.scm index 86ce1514f0..f77c153197 100644 --- a/gnu/packages/rails.scm +++ b/gnu/packages/rails.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2016 Matthew Jordan <matthewjordandevops@yandex.com> ;;; Copyright © 2018 Tobias Geerinckx-Rice <me@tobias.gr> +;;; Copyright © 2019 Efraim Flashner <efraim@flashner.co.il> ;;; ;;; This file is part of GNU Guix. ;;; @@ -32,14 +33,14 @@ (version "1.7.2") (source (origin - (method url-fetch) - (uri - (string-append "https://github.com/rails/spring/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/rails/spring") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "1dd58y0cpsm2izj74yscn0ybfygmgcbbfdw1891g7cq41aai4b35")))) + "0smwrndjmnr7g7jjskw05zin3gh6kx5db6yrkiqi6i9wl5mrn9n5")))) (build-system ruby-build-system) (arguments `(#:test-target "test:unit" diff --git a/gnu/packages/ruby.scm b/gnu/packages/ruby.scm index d30ee415c4..57d7fa91f3 100644 --- a/gnu/packages/ruby.scm +++ b/gnu/packages/ruby.scm @@ -7,7 +7,7 @@ ;;; Copyright © 2015, 2016, 2017 Ben Woodcroft <donttrustben@gmail.com> ;;; Copyright © 2017 ng0 <ng0@n0.is> ;;; Copyright © 2017, 2019 Marius Bakke <mbakke@fastmail.com> -;;; Copyright © 2017, 2018 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2017, 2018, 2019 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2017, 2018 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2017 Clément Lassieur <clement@lassieur.org> ;;; Copyright © 2017, 2018, 2019 Christopher Baines <mail@cbaines.net> @@ -3517,15 +3517,16 @@ net/http library.") (version "1.13.1") (source (origin - (method url-fetch) + (method git-fetch) ;; Tests are not distributed at rubygems.org so download from GitHub ;; instead. - (uri (string-append "https://github.com/intridea/multi_json/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/intridea/multi_json") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "1s64xqvrnrxmb59v6b2kchnisawg5ai9ky1w60dy6z6ws9la1xv4")))) + "18wpb6p01rrkl4v33byh70vxj2a5jxkfxzv3pz8z6pssy4ymwkm4")))) (build-system ruby-build-system) (arguments `(#:phases @@ -3931,16 +3932,17 @@ invocation, and source and documentation browsing.") (name "ruby-guard") (version "2.13.0") (source (origin - (method url-fetch) + (method git-fetch) ;; The gem does not include a Rakefile, nor does it contain a ;; gemspec file, nor does it come with the tests. This is why ;; we fetch the tarball from Github. - (uri (string-append "https://github.com/guard/guard/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/guard/guard") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "1hwj0yi17k6f5axrm0k2bb7fq71dlp0zfywmd7pij9iimbppcca0")))) + "16pxcszr0g2jnl3090didxh1d8z5m2mly14m3w4rspb8fmclsnjs")))) (build-system ruby-build-system) (arguments `(#:tests? #f ; tests require cucumber @@ -3971,7 +3973,7 @@ invocation, and source and documentation browsing.") "Guard is a command line tool to easily handle events on file system modifications. Guard automates various tasks by running custom rules whenever file or directories are modified.") - (home-page "http://guardgem.org/") + (home-page "https://guardgem.org/") (license license:expat))) (define-public ruby-tilt @@ -4066,17 +4068,16 @@ aware transformations between times in different time zones.") (version "1.2017.3") (source (origin - (method url-fetch) + (method git-fetch) ;; Download from GitHub because the rubygems version does not contain ;; Rakefile or tests. - (uri (string-append - "https://github.com/tzinfo/tzinfo-data/archive/v" - version - ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/tzinfo/tzinfo-data") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "01wff7syqzikbxalbg3isgxasmvzicr85bzadzkb6bf20bip4v54")) + "0v3phl5l3jrm6waxcszqmj2dkjhqawxfsxb6mss7vkp1hlckqcdp")) ;; Remove the known test failure. ;; https://github.com/tzinfo/tzinfo-data/issues/10 ;; https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/1587128 @@ -4788,15 +4789,16 @@ unacceptable HTML and/or CSS from a string.") (version "3.6.7") (source (origin - (method url-fetch) + (method git-fetch) ;; Version on rubygems.org does not contain Rakefile, so download from ;; GitHub instead. - (uri (string-append "https://github.com/ohler55/oj/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/ohler55/oj") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "1x28ga72jxlnmsd8g8c0fw81vlh54r0qgagw2lxsd3x3la091g2h")))) + "1fqx58pwjiln7053lw2jy6ns4agcpxq2ac4f2fkd2ca3fxwpmh03")))) (build-system ruby-build-system) (arguments '(#:test-target "test_all" @@ -4815,7 +4817,7 @@ unacceptable HTML and/or CSS from a string.") (description "Oj is a JSON parser and generator for Ruby, where the encoding and decoding of JSON is implemented as a C extension to Ruby.") - (home-page "http://www.ohler.com/oj") + (home-page "http://www.ohler.com/oj/") (license (list license:expat ; Ruby code license:bsd-3)))) ; extension code @@ -5067,16 +5069,15 @@ generates Ruby program.") (version "2.0.6") (source (origin - (method url-fetch) + (method git-fetch) ;; Download from GitHub so that the patch can be applied. - (uri (string-append - "https://github.com/rack/rack/archive/" - version - ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/rack/rack") + (commit version))) + (file-name (git-file-name name version)) (sha256 (base32 - "0pb3g5ymvbf07xaxcn51dpqv3djlxavckp3qkxsjdxiqznb0d9p1")) + "1n7z4g1x6yxip096cdc04wq7yk7ywpinq28g2xjb46r4nlv5h0j6")) ;; Ignore test which fails inside the build environment but works ;; outside. (patches (search-patches "ruby-rack-ignore-failing-test.patch")))) @@ -5102,7 +5103,15 @@ generates Ruby program.") (number->string (+ 22 size-diff)) "-" (number->string (+ 33 size-diff)))))) - #t))))) + #t)) + (add-before 'reset-gzip-timestamps 'make-files-writable + (lambda* (#:key outputs #:allow-other-keys) + ;; Make sure .gz files are writable so that the + ;; 'reset-gzip-timestamps' phase can do its work. + (let ((out (assoc-ref outputs "out"))) + (for-each make-file-writable + (find-files out "\\.gz$")) + #t)))))) (native-inputs `(("ruby-minitest" ,ruby-minitest) ("ruby-minitest-sprint" ,ruby-minitest-sprint) @@ -5746,14 +5755,15 @@ A modified copy of yajl is used, and included in the package.") (version "0.9.16") (source (origin - (method url-fetch) + (method git-fetch) ;; Tests do not pass if we build from the distributed gem. - (uri (string-append "https://github.com/lsegal/yard/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/lsegal/yard") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "0sqpbayy9sb406jh0zqg6qha1xds863qz9531dh6vp58hc00clfq")))) + "0a4r1pfs0ms4vlccsf1x2jckx35lqm8b8lh6rdjxqfr5fia5izpf")))) (build-system ruby-build-system) (arguments `(#:phases @@ -6579,14 +6589,15 @@ requests either using arguments or with an interactive prompt.") (version "1.5.0") (source (origin - (method url-fetch) + (method git-fetch) ;; Fetch from GitHub as the gem does not contain testing code. - (uri (string-append "https://github.com/rubyworks/ansi/archive/" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/rubyworks/ansi") + (commit version))) + (file-name (git-file-name name version)) (sha256 (base32 - "1zdip30hivyipi8hndhb457bhiz033awd00bgrsk5axjrwp6zhly")))) + "1wsz7xxwl3vkh277jb7fd7akqnqqgbvalxzpjwniiqk8ghfprbi5")))) (build-system ruby-build-system) (arguments `(#:phases @@ -6617,7 +6628,7 @@ methods, a @code{Mixin} module for including color methods, a @code{Logger}, a @code{ProgressBar}, and a @code{String} subclass. The library also includes a @code{Terminal} module which provides information about the current output device.") - (home-page "https://rubyworks.github.io/ansi") + (home-page "https://rubyworks.github.io/ansi/") (license license:bsd-2))) (define-public ruby-systemu @@ -6803,15 +6814,15 @@ and locking between worker processes.") (version "1.8.2") (source (origin - (method url-fetch) + (method git-fetch) ;; Fetch from github so tests are included. - (uri (string-append - "https://github.com/rubyworks/ae/archive/" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/rubyworks/ae") + (commit version))) + (file-name (git-file-name name version)) (sha256 (base32 - "147jmkx54x7asy2d8m4dyrhhf4hdx4galpnhwzai030y3cdsfrrl")))) + "11299jj5ma8mi7b4majkyjy70y6zlqpgl8aql1c5lvfjavlpwmlp")))) (build-system ruby-build-system) (arguments `(#:phases @@ -6837,7 +6848,7 @@ and locking between worker processes.") (description "Assertive Expressive (AE) is an assertions library specifically designed for reuse by other test frameworks.") - (home-page "https://rubyworks.github.io/ae") + (home-page "https://rubyworks.github.io/ae/") (license license:bsd-2))) (define-public ruby-lemon @@ -7004,15 +7015,15 @@ binary-to-text encoding. The main modern use of Ascii85 is in PostScript and (version "1.5.1") (source (origin - (method url-fetch) + (method git-fetch) ;; fetch from github as the gem does not contain testing code - (uri (string-append - "https://github.com/prawnpdf/ttfunk/archive/" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/prawnpdf/ttfunk") + (commit version))) + (file-name (git-file-name name version)) (sha256 (base32 - "1ymcn12n5iws401yz03zsj8rr653fdqq13czsrciq09phgh9jzc5")))) + "0dx9891zcli0sjrslmsvrwalv86hbjbqlmbrcasnjr069v05h9v9")))) (build-system ruby-build-system) (arguments `(#:test-target "spec" @@ -7052,14 +7063,15 @@ part of the Prawn PDF generator.") (version "3.9.1") (source (origin - (method url-fetch) + (method git-fetch) ;; Fetch from GitHub because distributed gem does not contain tests. - (uri (string-append "https://github.com/puma/puma/archive/v" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (uri (git-reference + (url "https://github.com/puma/puma") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "03pifga841h17brh4vgia8i2ybh3cmsyg0dbybzdf6dq51wzcxdx")))) + "1kj75k81iik3aj73pkc9ixj9rwf95ipkyma65n28m64dgw02qi1f")))) (build-system ruby-build-system) (arguments `(#:tests? #f ; Tests require an out-dated version of minitest. @@ -7077,7 +7089,7 @@ for Ruby/Rack applications. Puma is intended for use in both development and production environments. In order to get the best throughput, it is highly recommended that you use a Ruby implementation with real threads like Rubinius or JRuby.") - (home-page "http://puma.io") + (home-page "https://puma.io/") (license license:expat))) (define-public ruby-hoe-git diff --git a/gnu/packages/samba.scm b/gnu/packages/samba.scm index a60b735414..8a1fad5e43 100644 --- a/gnu/packages/samba.scm +++ b/gnu/packages/samba.scm @@ -58,14 +58,14 @@ (define-public cifs-utils (package (name "cifs-utils") - (version "6.9") + (version "6.10") (source (origin (method url-fetch) (uri (string-append "https://download.samba.org/pub/linux-cifs/" "cifs-utils/cifs-utils-" version ".tar.bz2")) (sha256 (base32 - "175cp509wn1zv8p8mv37hkf6sxiskrsxdnq22mhlsg61jazz3n0q")))) + "19q4b5bzlxhn1hpi843xrp6f50d33w7m0rs26krkg5h3x742kz4j")))) (build-system gnu-build-system) (native-inputs `(("autoconf" ,autoconf) @@ -81,12 +81,24 @@ (arguments `(#:phases (modify-phases %standard-phases - (add-before 'configure 'set-root-sbin + (replace 'bootstrap + ;; Force a bootstrap to fix a ‘cannot find install-sh, install.sh, + ;; or shtool’ error since version 6.10. (lambda _ + (invoke "autoreconf" "-vfi") + #t)) + (add-before 'configure 'set-root-sbin + (lambda* (#:key outputs #:allow-other-keys) ;; Don't try to install into "/sbin". (setenv "ROOTSBINDIR" - (string-append (assoc-ref %outputs "out") "/sbin")) - #t))))) + (string-append (assoc-ref outputs "out") "/sbin")) + #t)) + (add-before 'install 'create-man8dir + ;; Create a directory that isn't created since version 6.10. + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (mkdir-p (string-append out "/share/man/man8")) + #t)))))) (synopsis "User-space utilities for Linux CIFS (Samba) mounts") (description "@code{cifs-utils} is a set of user-space utilities for mounting and managing @dfn{Common Internet File System} (CIFS) shares using @@ -156,14 +168,14 @@ anywhere.") (define-public samba (package (name "samba") - (version "4.11.2") + (version "4.11.4") (source (origin (method url-fetch) (uri (string-append "https://download.samba.org/pub/samba/stable/" "samba-" version ".tar.gz")) (sha256 (base32 - "07wzn0fq90mbrfsm5qvyrzvhb9s76yvwqvw9hxazn9azryvz2yyj")))) + "096vc6j36924xrjzqr6lqmf9qwgwv9szxb35rsfi0mq78nx72m5r")))) (build-system gnu-build-system) (arguments `(#:phases @@ -247,14 +259,14 @@ Desktops into Active Directory environments using the winbind daemon.") (define-public talloc (package (name "talloc") - (version "2.3.0") + (version "2.3.1") (source (origin (method url-fetch) (uri (string-append "https://www.samba.org/ftp/talloc/talloc-" version ".tar.gz")) (sha256 (base32 - "1iigk4a7n9k9qqq0h3a5vah67ycpqzvahvdhzy15lm428jrvrmbm")))) + "0xwzgzrqamfdlklwacp9d219pqkah0yfrhxb1j7bxlmgzp924j7g")))) (build-system gnu-build-system) (arguments '(#:phases @@ -314,14 +326,14 @@ destructors. It is the core memory allocator used in Samba.") (define-public tevent (package (name "tevent") - (version "0.10.1") + (version "0.10.2") (source (origin (method url-fetch) (uri (string-append "https://www.samba.org/ftp/tevent/tevent-" version ".tar.gz")) (sha256 (base32 - "1dhhd7fz6wyvlwrk1a6gj5m2mcjsc3ilx0mcv1qsr1lbndldm93r")))) + "15k6i8ad5lpxfjsjyq9h64zlyws8d3cm0vwdnaw8z1xjwli7hhpq")))) (build-system gnu-build-system) (arguments '(#:phases diff --git a/gnu/packages/scheme.scm b/gnu/packages/scheme.scm index cc69c54703..cc0bfffea4 100644 --- a/gnu/packages/scheme.scm +++ b/gnu/packages/scheme.scm @@ -223,20 +223,18 @@ features an integrated Emacs-like editor and a large runtime library.") (define-public bigloo ;; Upstream modifies source tarballs in place, making significant changes - ;; long after the initial publication: <https://bugs.gnu.org/33525>. For - ;; transparency, we give this "second 4.3b" release a different version - ;; number. - (let ((upstream-version "4.3e")) + ;; long after the initial publication: <https://bugs.gnu.org/33525>. + (let ((upstream-version "4.3f")) (package (name "bigloo") - (version "4.3e1") + (version "4.3f") (source (origin (method url-fetch) (uri (string-append "ftp://ftp-sop.inria.fr/indes/fp/Bigloo/bigloo" upstream-version ".tar.gz")) (sha256 (base32 - "12k1kxyn3yilba0508xh8wkrw6279gnghzqi0bs2ayf5d2wkqdj3")) + "09whj8z91qbihk59dw2yb2ccbx9nk1c4l65j62pfs1pz822cpyh9")) ;; Remove bundled libraries. (modules '((guix build utils))) (snippet @@ -307,7 +305,7 @@ features an integrated Emacs-like editor and a large runtime library.") `(("pkg-config" ,pkg-config))) (propagated-inputs `(("gmp" ,gmp))) ; bigloo.h refers to gmp.h - (home-page "http://www-sop.inria.fr/indes/fp/Bigloo/") + (home-page "https://www-sop.inria.fr/indes/fp/Bigloo/") (synopsis "Efficient Scheme compiler") (description "Bigloo is a Scheme implementation devoted to one goal: enabling Scheme diff --git a/gnu/packages/serialization.scm b/gnu/packages/serialization.scm index 8efad0af86..137ecce4e4 100644 --- a/gnu/packages/serialization.scm +++ b/gnu/packages/serialization.scm @@ -105,7 +105,7 @@ such as compact binary encodings, XML, or JSON.") (define-public msgpack (package (name "msgpack") - (version "3.2.0") + (version "3.2.1") (source (origin (method url-fetch) @@ -120,8 +120,7 @@ such as compact binary encodings, XML, or JSON.") (close-output-port p) #t)) (sha256 - (base32 - "1zhsap7d9zqdm9h1qnpaw78v1sh3rx2if7gk4dszs5m3cg1jiapv")))) + (base32 "1ljqmgscdb0f8w8kx2lnswnisyxchcmijbjbmswkv0g187bvqg23")))) (build-system cmake-build-system) (native-inputs `(("googletest" ,googletest) diff --git a/gnu/packages/shells.scm b/gnu/packages/shells.scm index ef7f911682..0369a20e0c 100644 --- a/gnu/packages/shells.scm +++ b/gnu/packages/shells.scm @@ -12,6 +12,7 @@ ;;; Copyright © 2019 Meiyo Peng <meiyo.peng@gmail.com> ;;; Copyright © 2019 Timothy Sample <samplet@ngyro.com> ;;; Copyright © 2019 Mathieu Othacehe <m.othacehe@gmail.com> +;;; Copyright © 2019 Jan (janneke) Nieuwenhuizen <janneke@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -802,30 +803,22 @@ is commonly written.") (define-public gash (package (name "gash") - (version "0.1") + (version "0.2.0") (source (origin (method url-fetch) (uri (string-append "mirror://savannah/gash/gash-" version ".tar.gz")) (sha256 (base32 - "00m3lif64zyxd41cnk208kc81nl6qz659676qgiaqgwrw0brzrid")) - (modules '((guix build utils))) - (snippet - '(begin - (substitute* "Makefile.in" - (("^moddir = (.*)/guile/(.*)" _ before after) - (string-append "moddir = " before "/guile/site/" - after)) - (("^ccachedir = (.*)/ccache/(.*)" _ before after) - (string-append "ccachedir = " before - "/site-ccache/" after))) - #t)))) + "13m0yz5h9nj3x40mr6wr5xcpq1lscndfwcicw3skrz801025hhgf")) + (modules '((guix build utils))))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) (inputs `(("guile" ,guile-2.2))) + (arguments + '(#:make-flags '("XFAIL_TESTS=tests/redirects.org"))) (home-page "https://savannah.nongnu.org/projects/gash/") (synopsis "POSIX-compatible shell written in Guile Scheme") (description "Gash is a POSIX-compatible shell written in Guile diff --git a/gnu/packages/sml.scm b/gnu/packages/sml.scm index 30ee58c498..d441dcf638 100644 --- a/gnu/packages/sml.scm +++ b/gnu/packages/sml.scm @@ -2,7 +2,7 @@ ;;; Copyright © 2017 Andy Patterson <ajpatter@uwaterloo.ca> ;;; Copyright © 2017 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2018 Ricardo Wurmus <rekado@elephly.net> -;;; Copyright © 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; diff --git a/gnu/packages/sphinx.scm b/gnu/packages/sphinx.scm index b74137362c..4e4abccb04 100644 --- a/gnu/packages/sphinx.scm +++ b/gnu/packages/sphinx.scm @@ -11,6 +11,8 @@ ;;; Copyright © 2017 Julien Lepiller <julien@lepiller.eu> ;;; Copyright © 2019 Efraim Flashner <efraim@flashner.co.il> ;;; Copyright © 2019 Nicolas Goaziou <mail@nicolasgoaziou.fr> +;;; Copyright © 2019 Alexandros Theodotou <alex@zrythm.org> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -46,14 +48,14 @@ (define-public python-sphinx (package (name "python-sphinx") - (version "2.2.0") + (version "2.3.1") (source (origin (method url-fetch) (uri (pypi-uri "Sphinx" version)) (sha256 (base32 - "0ig8s94xg0p6h9y5s3ns9x8i10b24ihzvs65b5jwrhrgih7nnn0d")))) + "19a28nsb0w4bs6k8rdfyk6vzrcwdpvhs2wq77rgpmww59yvndrz6")))) (build-system python-build-system) (arguments `(#:phases @@ -67,16 +69,16 @@ "@pytest.mark.skip()")) (invoke "make" "test")))))) (propagated-inputs - `(("python-imagesize" ,python-imagesize) - ("python-sphinx-alabaster-theme" - ,python-sphinx-alabaster-theme) - ("python-babel" ,python-babel) - ("python-snowballstemmer" ,python-snowballstemmer) + `(("python-babel" ,python-babel) ("python-docutils" ,python-docutils) ("python-jinja2" ,python-jinja2) + ("python-imagesize" ,python-imagesize) ("python-packaging" ,python-packaging) ("python-pygments" ,python-pygments) ("python-requests" ,python-requests) + ("python-snowballstemmer" ,python-snowballstemmer) + ("python-sphinx-alabaster-theme" + ,python-sphinx-alabaster-theme) ("python-sphinxcontrib-applehelp" ,python-sphinxcontrib-applehelp) ("python-sphinxcontrib-devhelp" ,python-sphinxcontrib-devhelp) ("python-sphinxcontrib-htmlhelp" ,python-sphinxcontrib-htmlhelp) @@ -91,12 +93,12 @@ ("python-mock" ,python-mock) ("python-nose" ,python-nose) ("python-pytest" ,python-pytest))) - (home-page "https://sphinx-doc.org/") + (home-page "http://www.sphinx-doc.org") (synopsis "Python documentation generator") (description "Sphinx is a tool that makes it easy to create documentation for Python projects or other documents consisting of multiple reStructuredText sources.") - (license license:bsd-3) + (license license:bsd-2) (properties `((python2-variant . ,(delay python2-sphinx)))))) ;; Sphinx 2 does not support Python 2, so we stick with this older version here. @@ -167,15 +169,22 @@ Apple help books.") (define-public python-sphinx-copybutton (package (name "python-sphinx-copybutton") - (version "0.2.5") + (version "0.2.6") (source (origin (method url-fetch) (uri (pypi-uri "sphinx-copybutton" version)) (sha256 (base32 - "1bk006nv5s9ym6v67cxd4d2wvd8wm6czqi21mqcs33risygksncl")))) + "0ny9jpygj93z8jyjpi4v6jjz90pmns74s389wq16igzzq2mpgfjm")))) (build-system python-build-system) + (arguments + `(#:tests? #f)) ; XXX: Check requires network access. + (propagated-inputs + `(("python-flit" ,python-flit) + ("python-setuptools" ,python-setuptools) + ("python-sphinx" ,python-sphinx) + ("python-wheel" ,python-wheel))) (home-page "https://github.com/choldgraf/sphinx-copybutton") (synopsis "Sphinx extension to add \"copy\" buttons to code blocks") (description @@ -241,7 +250,7 @@ HTML help files.") (description "@code{sphinxcontrib-jsmath} is a Sphinx extension which renders display math in HTML via JavaScript.") - (license license:bsd-3))) + (license license:bsd-2))) (define-public python-sphinxcontrib-newsfeed (package @@ -266,23 +275,23 @@ Blog, News or Announcements section to a Sphinx website.") (define-public python-sphinxcontrib-programoutput (package (name "python-sphinxcontrib-programoutput") - (version "0.10") + (version "0.15") (source (origin (method url-fetch) (uri (pypi-uri "sphinxcontrib-programoutput" version)) (sha256 (base32 - "153hhnlbx4688zj9wd64819ps5znc2jlyp5crkgzvn5hxgy99vpx")))) + "155bz0z2cz544pphkd3nk7ph83mz7nn0ql135kzi62kqmd75ppc0")))) (build-system python-build-system) (arguments - ;; FIXME: Many tests are failing and the upstream is gone. + ;; FIXME: Many tests are failing. '(#:tests? #f)) (propagated-inputs `(("python-sphinx" ,python-sphinx))) (synopsis "Sphinx extension to include program output") (description "A Sphinx extension to literally insert the output of arbitrary commands into documents, helping you to keep your command examples up to date.") - (home-page "https://github.com/lunaryorn/sphinxcontrib-programoutput") + (home-page "https://github.com/NextThought/sphinxcontrib-programoutput") (license license:bsd-2))) (define-public python2-sphinxcontrib-programoutput @@ -331,21 +340,21 @@ documents.") (define-public python-sphinxcontrib-svg2pdfconverter (package (name "python-sphinxcontrib-svg2pdfconverter") - (version "0.1.0") + (version "1.0.1") (source (origin (method url-fetch) (uri (pypi-uri "sphinxcontrib-svg2pdfconverter" version)) (sha256 (base32 - "1abvbgkkii13q8nsb10r0gc5lm0p9iq1iwhfhakn5ifn6asa0183")))) + "1hhaxmqc7wh8gnyw5jaqckliknvk0p21y12wk3bdmncgkaf9ar8f")))) (build-system python-build-system) (propagated-inputs `(("python-sphinx" ,python-sphinx))) - (home-page "https://github.com/missinglinkelectronics/sphinxcontrib-svg2pdfconverter/releases") + (home-page "https://github.com/missinglinkelectronics/sphinxcontrib-svg2pdfconverter") (synopsis "Sphinx SVG to PDF converter extension") - (description "A Sphinx extension to convert SVG images to PDF in case the builder does not support -SVG images natively (e.g. LaTeX).") - (license license:bsd-3))) + (description "A Sphinx extension to convert SVG images to PDF in case the +builder does not support SVG images natively (e.g. LaTeX).") + (license license:bsd-2))) (define-public python-sphinxcontrib-websupport (package @@ -565,3 +574,26 @@ and several other projects.") (description "This package is an extension to reStructuredText and Sphinx to be able to read and render the Doxygen xml output.") (license license:bsd-3))) + +(define-public python-sphinx-intl + (package + (name "python-sphinx-intl") + (version "2.0.0") + (source + (origin + (method url-fetch) + (uri (pypi-uri "sphinx-intl" version)) + (sha256 + (base32 + "0zbf1bh23b3kza8bnjykmv2k21xmmr4gamhi3lnicnr6ypnrphr5")))) + (build-system python-build-system) + (propagated-inputs + `(("python-sphinx" ,python-sphinx) + ("python-click" ,python-click))) + (home-page "https://github.com/sphinx-doc/sphinx-intl") + (synopsis + "Sphinx utility that makes it easy to translate and to apply translation") + (description + "A utility tool that provides several features that make it easy to +translate and to apply translation to Sphinx generated document.") + (license license:bsd-2))) diff --git a/gnu/packages/ssh.scm b/gnu/packages/ssh.scm index 7abf710757..ac95e11f7f 100644 --- a/gnu/packages/ssh.scm +++ b/gnu/packages/ssh.scm @@ -742,7 +742,7 @@ shell services and remote host selection.") (define-public clustershell (package (name "clustershell") - (version "1.8.2") + (version "1.8.3") (source (origin (method url-fetch) @@ -750,7 +750,7 @@ shell services and remote host selection.") "/download/v" version "/ClusterShell-" version ".tar.gz")) (sha256 - (base32 "1gz2g85wpk35n1fp31q753w01y3p8abm7dnbas28q4yjyvikqw75")))) + (base32 "1qdcgh733szwj9r1gambrgfkizvbjci0bnnkds9a8mnyb3sasnan")))) (build-system python-build-system) (inputs `(("openssh" ,openssh))) (propagated-inputs `(("python-pyyaml" ,python-pyyaml))) diff --git a/gnu/packages/statistics.scm b/gnu/packages/statistics.scm index 81ff0107b4..dfbed894b1 100644 --- a/gnu/packages/statistics.scm +++ b/gnu/packages/statistics.scm @@ -399,14 +399,14 @@ available, greatly increasing its breadth and scope.") (define-public r-boot (package (name "r-boot") - (version "1.3-23") + (version "1.3-24") (source (origin (method url-fetch) (uri (cran-uri "boot" version)) (sha256 (base32 - "0bx07zbb5nfz2xfgnzbspg7r5vxz4bjdz1ry4d1vk434vlcrxj1h")))) + "0yv0l55kjmlfdx1xhgyjdi0bskxhfal74wr5jxaib1qj99nmkm49")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/boot") (synopsis "Bootstrap functions for R") @@ -420,14 +420,14 @@ D.V. Hinkley (1997, CUP), originally written by Angelo Canty for S.") (define-public r-mass (package (name "r-mass") - (version "7.3-51.4") + (version "7.3-51.5") (source (origin (method url-fetch) (uri (cran-uri "MASS" version)) (sha256 (base32 - "0x1ckf51y851g0kvbhsgdxb26vfpmbw3xdbcnh3ck7fjm13da4cr")))) + "1k0m7pa4gb5apzrrkb5kx5d7bmkm2pl5g15vwb6j067hrqahck26")))) (properties `((upstream-name . "MASS"))) (build-system r-build-system) (home-page "http://www.stats.ox.ac.uk/pub/MASS4/") @@ -504,14 +504,14 @@ code for possible problems.") (define-public r-foreign (package (name "r-foreign") - (version "0.8-72") + (version "0.8-74") (source (origin (method url-fetch) (uri (cran-uri "foreign" version)) (sha256 (base32 - "124c9229is44p2rv7xyh2q86nsfi7vzyyh5n3c5ihziqrp4ig723")))) + "047w772msiki85rxxhqkxya37gmw4331l32651rr09dl2vq02pgj")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/foreign") (synopsis "Read data stored by other statistics software") @@ -590,13 +590,13 @@ and operations on them using LAPACK and SuiteSparse.") (define-public r-nlme (package (name "r-nlme") - (version "3.1-142") + (version "3.1-143") (source (origin (method url-fetch) (uri (cran-uri "nlme" version)) (sha256 - (base32 "0figfb1i22hfkkhzpprmpp723s01r43x725a1ab0pc9gsxqg90nx")))) + (base32 "13iixbs2ibldc75rl7rav5n5kx33zwm33xnfw1yvlkpcqf38bd22")))) (build-system r-build-system) (propagated-inputs `(("r-lattice" ,r-lattice))) @@ -933,15 +933,15 @@ in which the whole-plots or split-plots or both can be freely exchangeable.") (define-public r-plyr (package (name "r-plyr") - (version "1.8.4") + (version "1.8.5") (source (origin (method url-fetch) (uri (cran-uri "plyr" version)) (sha256 - (base32 "1igar5pcjqh0jyxv0z3jah8rz617vfa86vw0r5c7c031b7bj5db0")))) + (base32 "0x4mbb3rgv1ayxqidw0p9i10khbg51fz5r62vw4il8d7licqq07a")))) (build-system r-build-system) - (native-inputs `(("r-rcpp" ,r-rcpp))) + (propagated-inputs `(("r-rcpp" ,r-rcpp))) (home-page "http://had.co.nz/plyr") (synopsis "Tools for Splitting, Applying and Combining Data") (description @@ -1240,13 +1240,13 @@ evaluation (NSE) in R.") (define-public r-dbi (package (name "r-dbi") - (version "1.0.0") + (version "1.1.0") (source (origin (method url-fetch) (uri (cran-uri "DBI" version)) (sha256 (base32 - "1x8wy2vg2gcgd9bww04qmf0dsn3kp0rfjd8q8j1r2x9zxccg25pz")))) + "1r03j9rdcxb9bhxk40dkmy10ikz4yzsxhy3f9k9ix3x577xbfvd9")))) (build-system r-build-system) (home-page "https://github.com/rstats-db/DBI") (synopsis "R database interface") @@ -1260,13 +1260,13 @@ R/DBMS implementations.") (define-public r-bh (package (name "r-bh") - (version "1.69.0-1") + (version "1.72.0-2") (source (origin (method url-fetch) (uri (cran-uri "BH" version)) (sha256 (base32 - "18mckfwxxv8m8rzaz03mg2h6vhaj7y131h6yasfg0s73nxj47zd0")))) + "0y1cxnzdajcdsc9jlaby53253hril65h496wval08qlxsqnfc3ia")))) (build-system r-build-system) (home-page "https://github.com/eddelbuettel/bh") (synopsis "R package providing subset of Boost headers") @@ -1337,13 +1337,13 @@ supported via Andre Simon's highlight package.") (define-public r-mime (package (name "r-mime") - (version "0.7") + (version "0.8") (source (origin (method url-fetch) (uri (cran-uri "mime" version)) (sha256 (base32 - "12vpip67ajb90b8p96w43ir7mavrw2i61bwvpfnrlmlj9kj3w20i")))) + "18w98prfbivvygiyamsf9yg090kzbnvw2fn9b27823gmis4d08ny")))) (build-system r-build-system) (home-page "https://github.com/yihui/mime") (synopsis "R package to map filenames to MIME types") @@ -2540,18 +2540,20 @@ scaling functions for R.") (define-public r-latticeextra (package (name "r-latticeextra") - (version "0.6-28") + (version "0.6-29") (source (origin (method url-fetch) (uri (cran-uri "latticeExtra" version)) (sha256 (base32 - "1hkyqsa7klk5glj9y1hg3rxr5qilqw8h0017zc4c3nps7lr9a1kq")))) + "04fzwcqs594rk5qp98yilh3kdh3sw4xf8wld5rp94ggpaqfw7bbc")))) (properties `((upstream-name . "latticeExtra"))) (build-system r-build-system) (propagated-inputs - `(("r-lattice" ,r-lattice) + `(("r-jpeg" ,r-jpeg) + ("r-lattice" ,r-lattice) + ("r-png" ,r-png) ("r-rcolorbrewer" ,r-rcolorbrewer))) (home-page "http://latticeextra.r-forge.r-project.org/") (synopsis "Extra graphical utilities based on lattice") @@ -2662,13 +2664,13 @@ certain criterion, e.g., it contains a certain regular file.") (define-public r-rmarkdown (package (name "r-rmarkdown") - (version "1.18") + (version "2.0") (source (origin (method url-fetch) (uri (cran-uri "rmarkdown" version)) (sha256 - (base32 "0fykzbb5kjsqc8v6gjcdma7rmq0gailp30qij6plgna4d8nhjw3w")))) + (base32 "1bm3n17wa0pf1cq7qmwhbnn02x2pld7zzmmzjcvwy6apanch9fl7")))) (properties `((upstream-name . "rmarkdown"))) (build-system r-build-system) (propagated-inputs @@ -2777,13 +2779,13 @@ a column in data frame.") (define-public r-rsqlite (package (name "r-rsqlite") - (version "2.1.4") + (version "2.1.5") (source (origin (method url-fetch) (uri (cran-uri "RSQLite" version)) (sha256 (base32 - "1vhaq6zfqilya669l100adcw51xz0p370zabnk2dnk1xhdih1f34")))) + "0b1cjnk9g1lrxy0wajfq744qps7fila0xdh5j9chy1vrrwfiwzl0")))) (properties `((upstream-name . "RSQLite"))) (build-system r-build-system) (propagated-inputs @@ -2972,14 +2974,14 @@ statements.") (define-public r-segmented (package (name "r-segmented") - (version "1.0-0") + (version "1.1-0") (source (origin (method url-fetch) (uri (cran-uri "segmented" version)) (sha256 (base32 - "1igsfkffpa60zn6j45lhw1zgr5pz6rjknv2f3sylnx5l9fdwibgf")))) + "06cxdrqgnpk5fvbam5i7qa4n71wry0yvlj0jpwbxf267mvpx10fh")))) (build-system r-build-system) (home-page "https://cran.r-project.org/web/packages/segmented") (synopsis "Regression models with breakpoints estimation") @@ -3013,16 +3015,16 @@ worker processes and collect and return the results on the master.") (define-public r-sparsem (package (name "r-sparsem") - (version "1.77") + (version "1.78") (source (origin (method url-fetch) (uri (cran-uri "SparseM" version)) (sha256 (base32 - "0p6ljma2h12cq1xmy0cxb48ih8dhxxbnwkqzvx3cckxf2kprycm9")))) + "0cmlm0lps3daalvp5jzjnjfys388hgkyc8yw0g5r2351h749xdyn")))) (properties `((upstream-name . "SparseM"))) - (inputs + (native-inputs `(("gfortran" ,gfortran))) (build-system r-build-system) (home-page "http://www.econ.uiuc.edu/~roger/research/sparse/sparse.html") @@ -3130,13 +3132,13 @@ using the multicore functionality of the parallel package.") (define-public r-dt (package (name "r-dt") - (version "0.10") + (version "0.11") (source (origin (method url-fetch) (uri (cran-uri "DT" version)) (sha256 (base32 - "0vwhn1mcwv0hkbxnppf6vip23iiib0szvp1h3prawlkvd74xziiw")))) + "09k9s07aah1apc308sj1abvr27mky6fkpl9j6lxl2x55n4immvkg")))) (properties `((upstream-name . "DT"))) (build-system r-build-system) @@ -3207,13 +3209,13 @@ analysis of large sparse or dense matrices.") (define-public r-glmnet (package (name "r-glmnet") - (version "3.0-1") + (version "3.0-2") (source (origin (method url-fetch) (uri (cran-uri "glmnet" version)) (sha256 - (base32 "04wa926mnss53p1fhx0mjgxnmwmmqls12sc0sy7w09kbmyqa3fq7")))) + (base32 "0b3nnfzp8dxcdkvxr0yvy6d58yk3xg4kz1wqa42bxqppbakmd2gl")))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -3400,14 +3402,14 @@ message passing.") (define-public r-bigmemory (package (name "r-bigmemory") - (version "4.5.33") + (version "4.5.36") (source (origin (method url-fetch) (uri (cran-uri "bigmemory" version)) (sha256 (base32 - "0ycl9dzm3drpyas625h34rir5bnbjlncxlvawfsfmqwcbmwdjdvj")))) + "03pg8mxdc7q0249visjmc8bc3xmwxsfg3i2n6higicj4cfz7zihq")))) (build-system r-build-system) (propagated-inputs `(("r-bh" ,r-bh) @@ -4080,14 +4082,14 @@ hierarchical clustering dendrograms.") (define-public r-preprocesscore (package (name "r-preprocesscore") - (version "1.46.0") + (version "1.48.0") (source (origin (method url-fetch) (uri (bioconductor-uri "preprocessCore" version)) (sha256 (base32 - "0iiyn42hlvmc5vabg5x15mls11124i23sh4qijwk0narh438cqm0")))) + "0zrb9hx60vppkg0priczdb301nhq5f0dj8lkc8rcc4xrqqr915qm")))) (properties `((upstream-name . "preprocessCore"))) (build-system r-build-system) @@ -4889,14 +4891,14 @@ generally.") (define-public r-robust (package (name "r-robust") - (version "0.4-18.1") + (version "0.4-18.2") (source (origin (method url-fetch) (uri (cran-uri "robust" version)) (sha256 (base32 - "0xs098pfw5zdcdk3rsxkylfl6d2pyp566s5v92bzhgl7h8c90cfy")))) + "02x7d6dgx3skiadvx5m3c44b4bhz37ycpfhc25dhhv50y1db6l3k")))) (build-system r-build-system) (propagated-inputs `(("r-fit-models" ,r-fit-models) @@ -5107,13 +5109,13 @@ using modular prediction and response module classes.") (define-public r-quantreg (package (name "r-quantreg") - (version "5.52") + (version "5.54") (source (origin (method url-fetch) (uri (cran-uri "quantreg" version)) (sha256 - (base32 "0rq9as31wiz41lmi9hmdq3gknpcbpwqzfcn065ysjdxzjdb57dcy")))) + (base32 "19nh79qrkb75q348nk148l8wqjwnq5jgq29wpzqym5cfv1kjqfvh")))) (build-system r-build-system) (native-inputs `(("gfortran" ,gfortran))) @@ -5236,13 +5238,13 @@ Companion to Applied Regression, Third Edition, Sage.") (define-public r-car (package (name "r-car") - (version "3.0-5") + (version "3.0-6") (source (origin (method url-fetch) (uri (cran-uri "car" version)) (sha256 - (base32 "0w7fm81pn0wqrwzbjyddnrkpjl8gavg7ijh7rab9f21rkgkzgm3y")))) + (base32 "0yv5mwaa0ymrbis9590mx0zcj3w6j4drhs6ab13zhx4zc3x1b7b6")))) (build-system r-build-system) (propagated-inputs `(("r-abind" ,r-abind) diff --git a/gnu/packages/tbb.scm b/gnu/packages/tbb.scm index 926e1caca1..5414e663f4 100644 --- a/gnu/packages/tbb.scm +++ b/gnu/packages/tbb.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015, 2016 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2016 ng0 <ng0@n0.is> +;;; Copyright © 2019 Tobias Geerinckx-Rice <me@tobias.gr> ;;; ;;; This file is part of GNU Guix. ;;; @@ -28,16 +29,16 @@ (define-public tbb (package (name "tbb") - (version "2019_U9") + (version "2020.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/01org/tbb") - (commit version))) + (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 - "1a39nflw7b2n51jfp3fdprnkpgzaspzww1dckfvaigflfli9s8rj")) + "11prl038dh8gprvn5f5p16af2rgh4lr3bfyyvavgfl3jdvsj2mqh")) (modules '((guix build utils))) (snippet '(begin diff --git a/gnu/packages/telephony.scm b/gnu/packages/telephony.scm index 519677dfa8..ee8385d13c 100644 --- a/gnu/packages/telephony.scm +++ b/gnu/packages/telephony.scm @@ -13,6 +13,7 @@ ;;; Copyright © 2018 Tim Gesthuizen <tim.gesthuizen@yahoo.de> ;;; Copyright © 2019 Pierre Neidhardt <mail@ambrevar.xyz> ;;; Copyright © 2019 Jan Wielkiewicz <tona_kosmicznego_smiecia@interia.pl> +;;; Copyright © 2019 Ivan Vilata i Balaguer <ivan@selidor.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -44,6 +45,7 @@ #:use-module (gnu packages file) #:use-module (gnu packages protobuf) #:use-module (gnu packages gettext) + #:use-module (gnu packages gl) #:use-module (gnu packages glib) #:use-module (gnu packages gnome) #:use-module (gnu packages gnupg) @@ -76,7 +78,8 @@ #:use-module (guix download) #:use-module (guix git-download) #:use-module (guix build-system cmake) - #:use-module (guix build-system gnu)) + #:use-module (guix build-system gnu) + #:use-module (guix build-system qt)) (define-public commoncpp (package @@ -378,54 +381,63 @@ address of one of the participants.") (define-public mumble (package (name "mumble") - (version "1.2.19") + (version "1.3.0") (source (origin (method url-fetch) (uri (string-append "https://mumble.info/snapshot/" name "-" version ".tar.gz")) (sha256 (base32 - "1s60vaici3v034jzzi20x23hsj6mkjlc0glipjq4hffrg9qgnizh")) - (patches (search-patches "mumble-1.2.19-abs.patch")) + "03dqg5yf6d7ilc1wydpshnv1ndssppcbadqcq20jm5j4fdaf53cs")) (modules '((guix build utils))) (snippet `(begin - ;; Remove bundled software. - (for-each delete-file-recursively '("3rdparty" - "speex" - "speexbuild" - "opus-build" - "opus-src" - "sbcelt-helper-build" - "sbcelt-lib-build" - "sbcelt-src")) - ;; TODO: Celt is still bundled. It has been merged into Opus - ;; and will be removed after 1.3.0. - ;; https://github.com/mumble-voip/mumble/issues/1999 + ;; Remove bundled software. Keep arc4random, celt-0.7.0, + ;; celt-0.11.0, qqbonjour, rnnoise, smallft. + (for-each + delete-file-recursively + '("3rdparty/GL" ; in mesa + "3rdparty/mach-override-build" ; for macx + "3rdparty/mach-override-src" + "3rdparty/minhook-build" ; for win32 + "3rdparty/minhook-src" + "3rdparty/opus-build" ; in opus + "3rdparty/opus-src" + "3rdparty/sbcelt-helper-build" ; not enabled + "3rdparty/sbcelt-lib-build" + "3rdparty/sbcelt-src" + "3rdparty/speex-build" ; in speex + "3rdparty/speex-src" + "3rdparty/speexdsp-src" ; in speexdsp + "3rdparty/xinputcheck-build" ; for win32 + "3rdparty/xinputcheck-src")) #t)))) - (build-system gnu-build-system) + (build-system qt-build-system) (arguments `(#:tests? #f ; no "check" target #:phases (modify-phases %standard-phases (replace 'configure - (lambda* (#:key outputs #:allow-other-keys) - (invoke "qmake" "main.pro" "-recursive" + (lambda* (#:key inputs outputs #:allow-other-keys) + (invoke "qmake" "main.pro" "QMAKE_LRELEASE=lrelease" + (string-append "MUMBLE_PYTHON=" + (string-append (assoc-ref inputs "python") + "/bin/python3")) (string-append "CONFIG+=" (string-join - (list "no-update" - "no-ice" + ;; Options used are listed in the same order + ;; as in the "INSTALL" file + ;; (plus the final "packaged" and "release"). + (list "no-bundled-speex" ; in speex + "no-bundled-opus" ; in opus + "no-g15" ; not packaged + "no-jackaudio" ; use pulse + "no-oss" ; use pulse + "no-alsa" ; use pulse + "no-update" "no-embed-qt-translations" - "no-bundled-speex" - "pch" - "no-bundled-opus" - "no-celt" - "no-alsa" - "no-oss" - "no-portaudio" - "speechd" - "no-g15" - "no-bonjour" + "no-ice" ; not packaged + "packaged" "release"))) (string-append "DEFINES+=" "PLUGIN_PATH=" @@ -434,7 +446,13 @@ address of one of the participants.") (add-before 'configure 'fix-libspeechd-include (lambda _ (substitute* "src/mumble/TextToSpeech_unix.cpp" - (("libspeechd.h") "speech-dispatcher/libspeechd.h")))) + (("libspeechd.h") "speech-dispatcher/libspeechd.h")) + #t)) + (add-before 'install 'disable-murmur-ice + (lambda _ + (substitute* "scripts/murmur.ini.system" + (("^ice=") ";ice=")) + #t)) (replace 'install ; install phase does not exist (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) @@ -465,21 +483,23 @@ address of one of the participants.") (find-files "release/plugins" "\\.so$")))))))) (inputs `(("avahi" ,avahi) - ("protobuf" ,protobuf-3.5) - ("openssl" ,openssl) - ("libsndfile" ,libsndfile) ("boost" ,boost) - ("opus" ,opus) - ("speex" ,speex) - ("speexdsp" ,speexdsp) - ("speech-dispatcher" ,speech-dispatcher) - ("libx11" ,libx11) + ("libsndfile" ,libsndfile) ("libxi" ,libxi) - ("qt-4" ,qt-4) - ("alsa-lib" ,alsa-lib) - ("pulseaudio" ,pulseaudio))) + ("mesa" ,mesa) ; avoid bundled + ("openssl" ,openssl) + ("opus" ,opus) ; avoid bundled + ("protobuf" ,protobuf) + ("pulseaudio" ,pulseaudio) + ("qtbase" ,qtbase) + ("qtsvg" ,qtsvg) + ("speech-dispatcher" ,speech-dispatcher) + ("speex" ,speex) ; avoid bundled + ("speexdsp" ,speexdsp))) ; avoid bundled (native-inputs - `(("pkg-config" ,pkg-config))) + `(("pkg-config" ,pkg-config) + ("python" ,python) + ("qttools" ,qttools))) (synopsis "Low-latency, high quality voice chat software") (description "Mumble is an low-latency, high quality voice chat @@ -487,9 +507,9 @@ software primarily intended for use while gaming. Mumble consists of two applications for separate usage: @code{mumble} for the client, and @code{murmur} for the server.") (home-page "https://wiki.mumble.info/wiki/Main_Page") - (license (list license:bsd-3 - ;; The bundled celt is bsd-2. Remove after 1.3.0. - license:bsd-2)))) + (license (list license:bsd-3 ; mumble celt-0.7.0 qqbonjour rnnoise smallft + license:bsd-2 ; celt-0.11.0 + license:isc)))) ; arc4random (define-public twinkle (package diff --git a/gnu/packages/terminals.scm b/gnu/packages/terminals.scm index 75c0092064..ae015d9fe7 100644 --- a/gnu/packages/terminals.scm +++ b/gnu/packages/terminals.scm @@ -16,6 +16,7 @@ ;;; Copyright © 2018, 2019 Eric Bavier <bavier@member.fsf.org> ;;; Copyright © 2019 Julien Lepiller <julien@lepiller.eu> ;;; Copyright © 2019 Pierre Langlois <pierre.langlois@gmx.com> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -828,20 +829,21 @@ of VT100 terminal.") (define-public python-blessings (package (name "python-blessings") - (version "1.6.1") + (version "1.7") (source (origin (method url-fetch) (uri (pypi-uri "blessings" version)) (sha256 (base32 - "1smngy65p8mi62lgm04icasx22v976szhs2aq95y2ljmi1srb4bl")))) + "0z8mgkbmisxs10rz88qg46l1c9a8n08k8cy2iassal2zh16qbrcq")))) (build-system python-build-system) (arguments - ;; TODO: For py3, 2to2 is used to convert the code, but test-suite fails + ;; FIXME: Test suite is unable to detect TTY conditions. `(#:tests? #f)) (native-inputs - `(("python-nose" ,python-nose))) + `(("python-nose" ,python-nose) + ("python-six" ,python-six))) (home-page "https://github.com/erikrose/blessings") (synopsis "Python module to manage terminal color, styling, and positioning") diff --git a/gnu/packages/texinfo.scm b/gnu/packages/texinfo.scm index c755790448..ae8ecc868b 100644 --- a/gnu/packages/texinfo.scm +++ b/gnu/packages/texinfo.scm @@ -2,7 +2,8 @@ ;;; Copyright © 2012, 2013, 2015, 2016, 2017, 2019 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2014, 2016 Eric Bavier <bavier@member.fsf.org> ;;; Copyright © 2015 Mark H Weaver <mhw@netris.org> -;;; Copyright © 2017 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2017, 2019 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2019 Ricardo Wurmus <rekado@elephly.net> ;;; Copyright © 2019 Pierre-Moana Levesque <pierre.moana.levesque@gmail.com> ;;; Copyright © 2019 Mathieu Othacehe <m.othacehe@gmail.com> ;;; @@ -25,13 +26,18 @@ #:use-module (gnu packages autotools) #:use-module (guix licenses) #:use-module (guix packages) + #:use-module (guix utils) #:use-module (guix download) #:use-module (guix utils) + #:use-module (guix git-download) #:use-module (guix build-system gnu) #:use-module (gnu packages) + #:use-module (gnu packages autotools) #:use-module (gnu packages compression) + #:use-module (gnu packages gettext) #:use-module (gnu packages ncurses) - #:use-module (gnu packages perl)) + #:use-module (gnu packages perl) + #:use-module (gnu packages readline)) (define-public texinfo (package @@ -233,3 +239,52 @@ of the GNU Texinfo implementation) do not intend to make further releases of Texi2HTML.") ;; Files in /lib under lgpl2.1+ and x11 (license gpl2+))) + +(define-public pinfo + (package + (name "pinfo") + (version "0.6.13") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/baszoetekouw/pinfo.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "173d2p22irwiabvr4z6qvr6zpr6ysfkhmadjlyhyiwd7z62larvy")))) + (build-system gnu-build-system) + (arguments + `(#:phases + (modify-phases %standard-phases + (add-after 'unpack 'remove-Werror + (lambda _ + (substitute* "configure.ac" + (("-Werror") "")) + #t)) + (add-after 'unpack 'embed-reference-to-clear + (lambda* (#:key inputs #:allow-other-keys) + (substitute* '("src/manual.c" + "src/mainfunction.c" + "src/utils.c") + (("\"clear\"") + (string-append "\"" (which "clear") "\""))) + #t))))) + (inputs + `(("ncurses" ,ncurses) + ("readline" ,readline))) + (native-inputs + `(("autoconf" ,autoconf) + ("automake" ,automake) + ("gettext" ,gnu-gettext) + ("libtool" ,libtool) + ("texinfo" ,texinfo))) + (home-page "https://github.com/baszoetekouw/pinfo") + (synopsis "Lynx-style Info file and man page reader") + (description + "Pinfo is an Info file viewer. Pinfo is similar in use to the Lynx web +browser. You just move across info nodes, and select links, follow them, etc. +It supports many colors. Pinfo also supports viewing of manual pages -- they +are colorized like in the midnight commander's viewer, and additionaly they +are hypertextualized.") + (license gpl2+))) diff --git a/gnu/packages/text-editors.scm b/gnu/packages/text-editors.scm index 0ee64f3040..ac4c5b82ac 100644 --- a/gnu/packages/text-editors.scm +++ b/gnu/packages/text-editors.scm @@ -114,7 +114,7 @@ based command language.") (define-public kakoune (package (name "kakoune") - (version "2019.07.01") + (version "2019.12.10") (source (origin (method url-fetch) @@ -122,7 +122,7 @@ based command language.") "releases/download/v" version "/" "kakoune-" version ".tar.bz2")) (sha256 - (base32 "1lvgxnih4xfrkcmcc476qi9nz6dxcdbfxsinhykp3g80j14piycc")))) + (base32 "1y1gzax2dl7flh676k0rl1vacv10j7p5krkmb67b0afbrql8vbb6")))) (build-system gnu-build-system) (arguments `(#:make-flags diff --git a/gnu/packages/textutils.scm b/gnu/packages/textutils.scm index 668260b7d8..86358fa02d 100644 --- a/gnu/packages/textutils.scm +++ b/gnu/packages/textutils.scm @@ -17,6 +17,7 @@ ;;; Copyright © 2018 Pierre Neidhardt <mail@ambrevar.xyz> ;;; Copyright © 2018 Meiyo Peng <meiyo.peng@gmail.com> ;;; Copyright © 2019 Yoshinori Arai <kumagusu08@gmail.com> +;;; Copyright © 2019 Mădălin Ionel Patrașcu <madalinionel.patrascu@mdc-berlin.de> ;;; ;;; This file is part of GNU Guix. ;;; @@ -47,6 +48,7 @@ #:use-module (gnu packages autotools) #:use-module (gnu packages base) #:use-module (gnu packages compression) + #:use-module (gnu packages gcc) #:use-module (gnu packages gettext) #:use-module (gnu packages java) #:use-module (gnu packages ncurses) @@ -61,14 +63,14 @@ (define-public dos2unix (package (name "dos2unix") - (version "7.4.0") + (version "7.4.1") (source (origin (method url-fetch) - (uri (string-append "https://waterlan.home.xs4all.nl/" name "/" - name "-" version ".tar.gz")) + (uri (string-append "https://waterlan.home.xs4all.nl/dos2unix/" + "dos2unix-" version ".tar.gz")) (sha256 - (base32 "12h4c61g376bhq03y5g2xszkrkrj5hwd928rly3xsp6rvfmnbixs")))) + (base32 "08w6yywzirsxq8bh87jycvvw922ybhc2l426j2iqzliyn1h8mm8w")))) (build-system gnu-build-system) (arguments '(#:make-flags (list "CC=gcc" @@ -232,6 +234,7 @@ nested include statements).") (native-inputs `(("autoconf" ,autoconf) ("automake" ,automake) + ("gcc" ,gcc-5) ;; doesn't build with later versions ("libtool" ,libtool))) (home-page "https://github.com/agordon/libgtextutils") (synopsis "Gordon's text utils library") @@ -472,7 +475,7 @@ as existing hashing techniques, with provably negligible risk of collisions.") (define-public oniguruma (package (name "oniguruma") - (version "6.9.3") + (version "6.9.4") (source (origin (method url-fetch) (uri (string-append "https://github.com/kkos/" @@ -480,7 +483,7 @@ as existing hashing techniques, with provably negligible risk of collisions.") "/onig-" version ".tar.gz")) (sha256 (base32 - "0pvj37r1rd5h5vw99mdk8z4k44gq1ldwrapkamdiicksdfkr4ndb")))) + "0lvd1rpp49i0k1icblb0i76lj2cwmhf1c5p1jdz2m6g0ywpx4sa6")))) (build-system gnu-build-system) (home-page "https://github.com/kkos/oniguruma") (synopsis "Regular expression library") diff --git a/gnu/packages/tls.scm b/gnu/packages/tls.scm index 0d764b63ee..d01202c684 100644 --- a/gnu/packages/tls.scm +++ b/gnu/packages/tls.scm @@ -562,13 +562,13 @@ netcat implementation that supports TLS.") (package (name "python-acme") ;; Remember to update the hash of certbot when updating python-acme. - (version "0.40.1") + (version "1.0.0") (source (origin (method url-fetch) (uri (pypi-uri "acme" version)) (sha256 (base32 - "1z2zibs9lyxi5gxw9bny1127bjliwsp476kai1wnnnwd8238dgrk")))) + "1hl62dnh8zsipa5azzpy5kwgjgb5vflinhna1fsn7rcchhpz223a")))) (build-system python-build-system) (arguments `(#:phases @@ -619,7 +619,7 @@ netcat implementation that supports TLS.") (uri (pypi-uri "certbot" version)) (sha256 (base32 - "1l8h7ggq75h59246mmzigmjr5jvzi29hihrnz9aiqh6g8hq1pj4d")))) + "0aih7sir5byy8ah9lrgzwcaga7hjw98qj8bb1pxzzzqrvcqjvf46")))) (build-system python-build-system) (arguments `(,@(substitute-keyword-arguments (package-arguments python-acme) diff --git a/gnu/packages/toys.scm b/gnu/packages/toys.scm index 8c1a03b5d2..fd86aec6ef 100644 --- a/gnu/packages/toys.scm +++ b/gnu/packages/toys.scm @@ -1,6 +1,7 @@ ;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2017, 2018 Tobias Geerinckx-Rice <me@tobias.gr> ;;; Copyright © 2019 Jesse Gibbons <jgibbons2357+guix@gmail.com> +;;; Copyright © 2019 Timotej Lazar <timotej.lazar@araneo.si> ;;; ;;; This file is part of GNU Guix. ;;; @@ -20,9 +21,14 @@ (define-module (gnu packages toys) #:use-module (gnu packages bison) #:use-module (gnu packages flex) + #:use-module (gnu packages gtk) #:use-module (gnu packages ncurses) #:use-module (gnu packages perl) + #:use-module (gnu packages pkg-config) + #:use-module (gnu packages xml) + #:use-module (gnu packages xorg) #:use-module (guix build-system gnu) + #:use-module (guix download) #:use-module (guix git-download) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix packages)) @@ -156,3 +162,41 @@ The GNU project hosts a similar collection of filters, the GNU talkfilters.") license:public-domain ; jethro, kraut, ken, studly license:gpl1+ ; cockney, jive, nyc only say "gpl" license:expat))))) ; newspeak + +(define-public xsnow + (package + (name "xsnow") + (version "2.0.15") + (source + (origin + (method url-fetch) + (uri (string-append + "https://www.ratrabbit.nl/ratrabbit/system/files/xsnow/xsnow-" + version ".tar.gz")) + (sha256 + (base32 "086s42frbz9bk550414v908yrax4iwwlvlxv4zwp39cyp7wgws03")))) + (build-system gnu-build-system) + (arguments + '(#:phases + (modify-phases %standard-phases + (add-before 'configure 'fix-install-path + (lambda _ + ;; Install program to bin instead of games. + (substitute* "src/Makefile.in" + (("(gamesdir = \\$\\(exec_prefix\\)/)games" _ prefix) + (string-append prefix "bin"))) + #t))))) + (inputs + `(("gtk+" ,gtk+) + ("libx11" ,libx11) + ("libxpm" ,libxpm) + ("libxt" ,libxt) + ("libxxml2" ,libxml2))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (home-page "https://www.ratrabbit.nl/ratrabbit/content/xsnow/introduction") + (synopsis "Let it snow on the desktop") + (description "@code{Xsnow} animates snowfall and Santa with reindeer on +the desktop background. Additional customizable effects include wind, stars +and various scenery elements.") + (license license:gpl3+))) diff --git a/gnu/packages/version-control.scm b/gnu/packages/version-control.scm index cf60f02192..5f928716fa 100644 --- a/gnu/packages/version-control.scm +++ b/gnu/packages/version-control.scm @@ -1522,18 +1522,19 @@ masters from remote CVS hosts.") (define-public vc-dwim (package (name "vc-dwim") - (version "1.8") + (version "1.9") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/vc-dwim/vc-dwim-" version ".tar.xz")) (sha256 (base32 - "0d5sqafc40l878m8wjr35jxmalj4kam1m6ph60v08ng4ml5g7931")))) + "0mf1dd7wdqxsm4fcfinfd7iadzarmzvg747pbsbi32qpavpk8gdf")))) (build-system gnu-build-system) - (inputs `(("perl" ,perl) - ("inetutils" ,inetutils))) ; for `hostname', used in the tests - (native-inputs `(("emacs" ,emacs-minimal))) ; for `ctags' + (inputs `(("perl" ,perl))) + (native-inputs + `(("emacs" ,emacs-minimal) ; for `ctags' + ("inetutils" ,inetutils))) ; for `hostname', used in the tests (home-page "https://www.gnu.org/software/vc-dwim/") (synopsis "Version-control-agnostic ChangeLog diff and commit tool") (description @@ -1548,18 +1549,18 @@ standards-compliant ChangeLog entries based on the changes that it detects.") (define-public diffstat (package (name "diffstat") - (version "1.62") + (version "1.63") (source (origin (method url-fetch) (uri (list (string-append "ftp://invisible-island.net/diffstat/" - name "-" version ".tgz") + "diffstat-" version ".tgz") (string-append "http://invisible-mirror.net/archives/diffstat/" - name "-" version ".tgz"))) + "diffstat-" version ".tgz"))) (sha256 (base32 - "07sr482y6iw7n7ddkba0w51kbjc99snvnijkn5ba2xzd8hv1h2bz")))) + "0vyw200s5dv1257pmrh6c6fdkmw3slyz5szpqfx916xr04sdbpby")))) (build-system gnu-build-system) (home-page "https://invisible-island.net/diffstat/") (synopsis "Make histograms from the output of @command{diff}") @@ -1782,7 +1783,7 @@ from Subversion to any supported Distributed Version Control System (DVCS).") (define-public tig (package (name "tig") - (version "2.4.1") + (version "2.5.0") (source (origin (method url-fetch) (uri (string-append @@ -1790,7 +1791,7 @@ from Subversion to any supported Distributed Version Control System (DVCS).") version "/tig-" version ".tar.gz")) (sha256 (base32 - "1f2qhpzbl7f35lsjcnx8lxzskha24m4frczsw78284jp7qcamdmn")))) + "1x5famvvs93ih7sr11x7m33dksb1k7zs1s3c4zkyf0cjmxkpqlzz")))) (build-system gnu-build-system) (native-inputs `(("asciidoc" ,asciidoc) diff --git a/gnu/packages/video.scm b/gnu/packages/video.scm index 3280114878..c4a31ebb4c 100644 --- a/gnu/packages/video.scm +++ b/gnu/packages/video.scm @@ -24,7 +24,7 @@ ;;; Copyright © 2017, 2018, 2019 Rutger Helling <rhelling@mykolab.com> ;;; Copyright © 2018 Roel Janssen <roel@gnu.org> ;;; Copyright © 2018, 2019 Marius Bakke <mbakke@fastmail.com> -;;; Copyright © 2018 Pierre Neidhardt <mail@ambrevar.xyz> +;;; Copyright © 2018, 2019 Pierre Neidhardt <mail@ambrevar.xyz> ;;; Copyright © 2018, 2019 Leo Famulari <leo@famulari.name> ;;; Copyright © 2018 Brendan Tildesley <mail@brendan.scot> ;;; Copyright © 2018 Arun Isaac <arunisaac@systemreboot.net> @@ -34,6 +34,7 @@ ;;; Copyright © 2019 Mathieu Othacehe <m.othacehe@gmail.com> ;;; Copyright © 2019 Timo Eisenmann <eisenmann@fn.de> ;;; Copyright © 2019 Arne Babenhauserheide <arne_bab@web.de> +;;; Copyright © 2019 Riku Viitanen <riku.viitanen@protonmail.com> ;;; ;;; This file is part of GNU Guix. ;;; @@ -207,14 +208,14 @@ old-fashioned output methods with powerful ascii-art renderer.") (define-public celluloid (package (name "celluloid") - (version "0.17") + (version "0.18") (source (origin (method url-fetch) (uri (string-append "https://github.com/celluloid-player/celluloid/releases" "/download/v" version "/celluloid-" version ".tar.xz")) (sha256 - (base32 "0a3bhvs38gxjplygb0q9cx5djl5y0bmnxgaq0sd65j610a60f5h0")))) + (base32 "0gmscx9zb8ppfjlnmgbcmhknhawa05sdhxi7dv5wjapjq0glq481")))) (build-system glib-or-gtk-build-system) (native-inputs `(("intltool" ,intltool) @@ -1055,7 +1056,7 @@ audio/video codec library.") (define-public ffmpegthumbnailer (package (name "ffmpegthumbnailer") - (version "2.2.0") + (version "2.2.2") (source (origin (method git-fetch) (uri (git-reference @@ -1064,7 +1065,7 @@ audio/video codec library.") (file-name (git-file-name name version)) (sha256 (base32 - "0kl8aa547icy9b05njps02a8sw4yn4f8fzs228kig247sn09s4cp")))) + "1bakbr714j7yxdal1f5iq0gcl4cxggbbgj227ihdh5kvygqlwich")))) (build-system cmake-build-system) (native-inputs `(("pkg-config" ,pkg-config))) @@ -1436,6 +1437,49 @@ projects while introducing many more.") (define-public gnome-mpv (deprecated-package "gnome-mpv" celluloid)) +(define-public mpv-mpris + (package + (name "mpv-mpris") + (version "0.2") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/hoyon/mpv-mpris") + (commit version))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "06hq3j1jjlaaz9ss5l7illxz8vm5bng86jl24kawglwkqayhdnjx")))) + (build-system gnu-build-system) + (arguments + '(#:tests? #f ; no tests + #:make-flags '("CC=gcc") + #:phases + (modify-phases %standard-phases + (delete 'configure) ; no configure script + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (install-file "mpris.so" (string-append out "/lib"))) + #t))))) + (native-inputs + `(("pkg-config" ,pkg-config))) + (inputs + `(("glib" ,glib) + ("mpv" ,mpv))) + (home-page "https://github.com/hoyon/mpv-mpris") + (synopsis "MPRIS plugin for mpv") + (description "This package provides an @dfn{MPRIS} (Media Player Remote +Interfacing Specification) plugin for the @code{mpv} media player. It implements +@code{org.mpris.MediaPlayer2} and @code{org.mpris.MediaPlayer2.Player} D-Bus +interfaces. + +To load this plugin, specify the following option when starting mpv: +@code{--script $GUIX_PROFILE/lib/mpris.so} or link it into +@file{$HOME/.config/mpv/scripts}.") + (license license:expat))) + (define-public libvpx (package (name "libvpx") @@ -2090,15 +2134,15 @@ format changes.") (define-public xvid (package (name "xvid") - (version "1.3.5") + (version "1.3.6") (source (origin (method url-fetch) (uri (string-append - "http://downloads.xvid.org/downloads/xvidcore-" + "http://downloads.xvid.com/downloads/xvidcore-" version ".tar.bz2")) (sha256 (base32 - "1d0hy1w9sn6491a3vhyf3vmhq4xkn6yd4ralx1191s6qz5wz483w")))) + "0zppakvcgq5a42mhqqsbliclpg2jrhbmbfgrzalyfzr47jqmhssy")))) (build-system gnu-build-system) (native-inputs `(("yasm" ,yasm))) (arguments @@ -2298,7 +2342,7 @@ be used for realtime video capture via Linux-specific APIs.") (define-public obs (package (name "obs") - (version "24.0.3") + (version "24.0.4") (source (origin (method git-fetch) (uri (git-reference @@ -2307,7 +2351,7 @@ be used for realtime video capture via Linux-specific APIs.") (file-name (git-file-name name version)) (sha256 (base32 - "0g8nzs696f3myz4hvygav85b0jgjmn6dicy50axmapdv8miff9xa")))) + "0m15ch2ix9qrdf1a9mj7wcpl72z3h13zx60c9q72sb1435id2g1q")))) (build-system cmake-build-system) (arguments `(#:tests? #f)) ; no tests @@ -3032,7 +3076,7 @@ RTSP or SIP clients and servers.") (define-public libdvbpsi (package (name "libdvbpsi") - (version "1.3.2") + (version "1.3.3") (source (origin (method url-fetch) (uri (string-append @@ -3040,7 +3084,7 @@ RTSP or SIP clients and servers.") version "/libdvbpsi-" version ".tar.bz2")) (sha256 (base32 - "1zn5hfv4qbahmydbwh59a3b480s3m5ss27r6ml35gqdip7r3jkmc")))) + "04h1l3vrkrdsrvkgzcr51adk10g6hxcxvgjphyyxz718ry5rkd82")))) (build-system gnu-build-system) (home-page "https://www.videolan.org/developers/libdvbpsi.html") (synopsis "Library for decoding and generation of MPEG TS and DVB PSI @@ -3612,7 +3656,7 @@ video from a Wayland session.") (define-public gaupol (package (name "gaupol") - (version "1.6") + (version "1.7") (source (origin (method git-fetch) (uri (git-reference @@ -3621,7 +3665,7 @@ video from a Wayland session.") (file-name (git-file-name name version)) (sha256 (base32 - "164wlxxjiqvkzbqjzvqvz2zkn0kgqmhn52294xx4vc9b9ngdnn0m")))) + "1cp0ka8hzma1dxiisdhl2fznxklj2pl63vkdqcd91lrblghdj6x9")))) (build-system python-build-system) (native-inputs `(("gettext" ,gettext-minimal) @@ -3677,3 +3721,66 @@ user interface features a builtin video player and is designed with attention to convenience of translating and batch processing of multiple documents.") (home-page "https://otsaloma.io/gaupol/") (license license:gpl3+))) + +(define-public theorafile + (let ((commit "404b14d7602b5918d117eaa64e8aa6601ede8593")) + (package + (name "theorafile") + (version (git-version "0.0.0" "1" commit)) + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/FNA-XNA/Theorafile.git") + (commit commit))) + (file-name (git-file-name name version)) + (sha256 + (base32 "128c3pjzqbgrj020glm5jd6ss18vl19471lj615w2brjwb7c1f0z")))) + (build-system gnu-build-system) + (arguments + '(#:make-flags '("CC=gcc") + #:phases + (modify-phases %standard-phases + (delete 'configure) + (replace 'check + (lambda _ + (setenv "CC" "gcc") + (invoke "make" "test"))) + (replace 'install + (lambda* (#:key outputs #:allow-other-keys) + (let ((out (assoc-ref outputs "out"))) + (install-file "libtheorafile.so" (string-append out "/lib")) + (install-file "theorafile.h" (string-append out "/include"))) + #t))))) + (native-inputs + ;; For tests. + `(("sdl2" ,sdl2))) + (home-page "https://github.com/FNA-XNA/Theorafile") + (synopsis "Ogg Theora Video Decoder Library") + (description "Theorafile is a library for quickly and easily decoding Ogg +Theora videos. Theorafile was written to be used for FNA's VideoPlayer.") + (license license:zlib)))) + +(define-public dvdbackup + (package + (name "dvdbackup") + (version "0.4.2") + (source + (origin + (method url-fetch) + (uri (string-append "mirror://sourceforge/dvdbackup/dvdbackup/" + "dvdbackup-" version "/" + "dvdbackup-" version ".tar.xz")) + (sha256 + (base32 "1rl3h7waqja8blmbpmwy01q9fgr5r0c32b8dy3pbf59bp3xmd37g")))) + (build-system gnu-build-system) + (inputs + `(("libdvdcss" ,libdvdcss) + ("libdvdread" ,libdvdread))) + (home-page "http://dvdbackup.sourceforge.net") + (synopsis "DVD video ripper") + (description + "A simple command line tool to backup video from a DVD. Decrypts the +DVD using @command{libdvdcss}, but does @strong{not} demux, remux, +transcode or reformat the videos in any way, producing perfect backups.") + (license license:gpl3+))) diff --git a/gnu/packages/vim.scm b/gnu/packages/vim.scm index b360d1fcbe..b33fe42ceb 100644 --- a/gnu/packages/vim.scm +++ b/gnu/packages/vim.scm @@ -527,7 +527,7 @@ commit or run any Git arbitrary command.") (define-public vim-airline (package (name "vim-airline") - (version "0.10") + (version "0.11") (source (origin (method git-fetch) @@ -537,7 +537,7 @@ commit or run any Git arbitrary command.") (file-name (git-file-name name version)) (sha256 (base32 - "0k3c6p3xy6514n1n347ci4q9xjm9wwqirpdysam6f7r39crgmfhd")))) + "1aksmr73648pvyc75pfdz28k2d4ky52rn7xiwcv7lz87q3vqld7k")))) (build-system gnu-build-system) (arguments `(#:tests? #f diff --git a/gnu/packages/virtualization.scm b/gnu/packages/virtualization.scm index e83ae43da2..33bfdade0f 100644 --- a/gnu/packages/virtualization.scm +++ b/gnu/packages/virtualization.scm @@ -57,6 +57,7 @@ #:use-module (gnu packages golang) #:use-module (gnu packages gtk) #:use-module (gnu packages image) + #:use-module (gnu packages libbsd) #:use-module (gnu packages libusb) #:use-module (gnu packages linux) #:use-module (gnu packages ncurses) @@ -690,14 +691,14 @@ domains, their live performance and resource utilization statistics.") (define-public criu (package (name "criu") - (version "3.11") + (version "3.13") (source (origin (method url-fetch) (uri (string-append "http://download.openvz.org/criu/criu-" version ".tar.bz2")) (sha256 (base32 - "03nimyn3wy5mlw30gq7bvlzvvprqjv8f25240yj5arzlld8mhsw8")))) + "1yn9ix9lqvqvjrs3a3g6g1wqfniyf9n7giy0mr3jvijmrcm7y0pa")))) (build-system gnu-build-system) (arguments `(#:test-target "test" @@ -705,7 +706,11 @@ domains, their live performance and resource utilization statistics.") #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out")) (string-append "LIBDIR=" (assoc-ref %outputs "out") - "/lib")) + "/lib") + (string-append "ASCIIDOC=" (assoc-ref %build-inputs "asciidoc") + "/bin/asciidoc") + (string-append "XMLTO=" (assoc-ref %build-inputs "xmlto") + "/bin/xmlto")) #:phases (modify-phases %standard-phases (replace 'configure @@ -721,21 +726,17 @@ domains, their live performance and resource utilization statistics.") ;; which define some of the same constants. (assoc-ref inputs "kernel-headers") "/include")) - ;; Prevent xmlto from failing the install phase. + #t)) + (add-after 'configure 'fix-documentation + (lambda* (#:key inputs outputs #:allow-other-keys) (substitute* "Documentation/Makefile" - (("XMLTO.*:=.*") - (string-append "XMLTO:=" - (assoc-ref inputs "xmlto") - "/bin/xmlto" - " --skip-validation " - " -x " - (assoc-ref inputs "docbook-xsl") - "/xml/xsl/docbook-xsl-" - ,(package-version docbook-xsl) - "/manpages/docbook.xsl")) - (("\\$\\(XMLTO\\);") - (string-append (assoc-ref inputs "xmlto") - "/bin/xmlto;"))) + (("-m custom.xsl") + (string-append + "-m custom.xsl --skip-validation -x " + (assoc-ref inputs "docbook-xsl") "/xml/xsl/" + ,(package-name docbook-xsl) "-" + ,(package-version docbook-xsl) + "/manpages/docbook.xsl"))) #t)) (add-after 'unpack 'hardcode-variables (lambda* (#:key inputs #:allow-other-keys) @@ -783,7 +784,8 @@ domains, their live performance and resource utilization statistics.") ("libaio" ,libaio) ("libcap" ,libcap) ("libnet" ,libnet) - ("libnl" ,libnl))) + ("libnl" ,libnl) + ("libbsd" ,libbsd))) (native-inputs `(("pkg-config" ,pkg-config) ("perl" ,perl) @@ -959,7 +961,7 @@ Open Container Initiative specification.") (define-public umoci (package (name "umoci") - (version "0.4.4") + (version "0.4.5") (source (origin (method url-fetch) (uri (string-append @@ -968,7 +970,7 @@ Open Container Initiative specification.") (file-name (string-append "umoci-" version ".tar.xz")) (sha256 (base32 - "1wchmha5k2f370jfijmx9fqp0cp99zfa9ajmfbq3j24qc8p5k8lk")))) + "0x1yyvpllz6fyy9xip6f7b6c94v984n3faf8p50fr9y4ygkgi15a")))) (build-system go-build-system) (arguments '(#:import-path "github.com/openSUSE/umoci" @@ -1147,15 +1149,14 @@ by default and can be made read-only.") (define-public bochs (package (name "bochs") - (version "2.6.9") + (version "2.6.10") (source (origin (method url-fetch) (uri (string-append "https://sourceforge.net/projects/bochs/files/bochs/" version "/bochs-" version ".tar.gz")) (sha256 - (base32 - "1379cq4cnfprhw8mgh60i0q9j8fz8d7n3d5fnn2g9fdiv5znfnzf")))) + (base32 "1c3mw4b8wrjf8z44fvhycs95j1wd1c0b4khcv63giiia5j5q0gvj")))) (build-system gnu-build-system) (arguments `(#:tests? #f)) ; No tests exist diff --git a/gnu/packages/vpn.scm b/gnu/packages/vpn.scm index 1c2228c426..44d27dc119 100644 --- a/gnu/packages/vpn.scm +++ b/gnu/packages/vpn.scm @@ -456,14 +456,14 @@ The peer-to-peer VPN implements a Layer 2 (Ethernet) network between the peers (define-public wireguard (package (name "wireguard") - (version "0.0.20191127") + (version "0.0.20191219") (source (origin (method url-fetch) (uri (string-append "https://git.zx2c4.com/WireGuard/snapshot/" "WireGuard-" version ".tar.xz")) (sha256 (base32 - "01ixdhbvx5yiq07msd60f98685wdksss4pfhdn1d8r25z2k80kkx")))) + "1rxhhf18vnlbxpaxib6y55gbvr5h9dcvl8sn2l5slzz97066zfjs")))) (build-system gnu-build-system) (outputs '("out" ; The WireGuard userspace tools "kernel-patch")) ; A patch to build Linux with WireGuard support diff --git a/gnu/packages/web-browsers.scm b/gnu/packages/web-browsers.scm index 29fbe17513..4fdf5f5419 100644 --- a/gnu/packages/web-browsers.scm +++ b/gnu/packages/web-browsers.scm @@ -9,6 +9,7 @@ ;;; Copyright © 2018 Timo Eisenmann <eisenmann@fn.de> ;;; Copyright © 2018 Pierre Neidhardt <mail@ambrevar.xyz> ;;; Copyright © 2019 Clément Lassieur <clement@lassieur.org> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -275,19 +276,20 @@ access.") (define-public qutebrowser (package (name "qutebrowser") - (version "0.11.0") + (version "1.8.3") (source (origin (method url-fetch) - (uri (string-append "https://github.com/The-Compiler/" + (uri (string-append "https://github.com/qutebrowser/" "qutebrowser/releases/download/v" version "/" "qutebrowser-" version ".tar.gz")) (sha256 (base32 - "13ihx66jm1dd6vx8px7pm0kbzf2sf9x43hhivc1rp17kahnxxdyv")))) + "055zmzk3q0m3hx1742nfy2mdawfllrkvijnbzp1hiv01dj1bxaf8")))) (build-system python-build-system) (native-inputs - `(("asciidoc" ,asciidoc))) + `(("asciidoc" ,asciidoc) + ("python-attrs" ,python-attrs))) ; for tests (inputs `(("python-colorama" ,python-colorama) ("python-cssutils" ,python-cssutils) @@ -299,7 +301,12 @@ access.") ("python-pyqt" ,python-pyqt) ("qtwebkit" ,qtwebkit))) (arguments - `(#:tests? #f ;no tests + `(;; FIXME: Tests have been added to Qutebrowser. But they currently fail on + ;; trying to locate QtWebEngine, and run it on a specific display. + ;; There does not seem to be a trivial way to suppress this test. + ;; Either fix this, or wait for a liberated QtWebEngine to make into GNU Guix. + ;; Change this according to <https://bugs.gnu.org/35866>. + #:tests? #f #:phases (modify-phases %standard-phases (add-after 'install 'install-more @@ -310,7 +317,6 @@ access.") (invoke "a2x" "-f" "manpage" "doc/qutebrowser.1.asciidoc") (install-file "doc/qutebrowser.1" (string-append out "/share/man/man1")) - (for-each (lambda (i) (let ((src (format #f "icons/qutebrowser-~dx~d.png" i i)) @@ -321,11 +327,10 @@ access.") '(16 24 32 48 64 128 256 512)) (install-file "icons/qutebrowser.svg" (string-append hicolor "/scalable/apps")) - - (substitute* "qutebrowser.desktop" + (substitute* "misc/org.qutebrowser.qutebrowser.desktop" (("Exec=qutebrowser") (string-append "Exec=" out "/bin/qutebrowser"))) - (install-file "qutebrowser.desktop" app) + (install-file "misc/org.qutebrowser.qutebrowser.desktop" app) #t)))))) (home-page "https://qutebrowser.org/") (synopsis "Minimal, keyboard-focused, vim-like web browser") diff --git a/gnu/packages/web.scm b/gnu/packages/web.scm index 7595892283..b3d7d4c614 100644 --- a/gnu/packages/web.scm +++ b/gnu/packages/web.scm @@ -216,14 +216,14 @@ Interface} specification.") ;; ’stable’ and recommends that “in general you deploy the NGINX mainline ;; branch at all times” (https://www.nginx.com/blog/nginx-1-6-1-7-released/) ;; Consider updating the nginx-documentation package together with this one. - (version "1.17.6") + (version "1.17.7") (source (origin (method url-fetch) (uri (string-append "https://nginx.org/download/nginx-" version ".tar.gz")) (sha256 (base32 - "1dipq90h3n1xdslwbijwlhbk84r7q0bswlbvi970may09lqsbd1w")))) + "1zwiqljhzf0ym6r3hrg6k2qfb2mxi7i0lpafg4xnkr875225c9xn")))) (build-system gnu-build-system) (inputs `(("openssl" ,openssl) ("pcre" ,pcre) @@ -1518,7 +1518,7 @@ minimum to provide high performance operation.") (define-public libsass (package (name "libsass") - (version "3.5.5") + (version "3.6.3") (source (origin (method git-fetch) (uri (git-reference @@ -1527,7 +1527,7 @@ minimum to provide high performance operation.") (file-name (git-file-name name version)) (sha256 (base32 - "0830pjcvhzxh6yixj82x5k5r1xnadjqzi16kp53213icbly0r9ma")))) + "1vn0q343d1vxz5q0xb6f9dzjah8z6j0s6x0lwvwdd55xa8z7rsnh")))) (build-system gnu-build-system) (arguments `(#:phases @@ -1552,7 +1552,7 @@ stylesheets, you'll need to use another program that uses this library, (define-public sassc (package (name "sassc") - (version "3.5.0") + (version "3.6.1") (source (origin (method git-fetch) (uri (git-reference @@ -1561,7 +1561,7 @@ stylesheets, you'll need to use another program that uses this library, (file-name (git-file-name name version)) (sha256 (base32 - "0jsfz1zg4gwk0dq8i92ll12axs3s70wsdsmdyi71zx8zmvib5nl6")))) + "1sxm54mkhs9m4vnl7vn11y17mhzamc403hv3966j1c7p2rbzg5pv")))) (build-system gnu-build-system) (arguments `(#:make-flags @@ -4196,8 +4196,8 @@ CDF, Atom 0.3, and Atom 1.0 feeds.") (package-with-python2 python-feedparser)) (define-public guix-data-service - (let ((commit "af1324855e1ecaf9b1dd7afcc714d09aaa38f081") - (revision "6")) + (let ((commit "82b797ee9869ebe24f7dbbcc56c3d500e75dc2d3") + (revision "13")) (package (name "guix-data-service") (version (string-append "0.0.1-" revision "." (string-take commit 7))) @@ -4209,7 +4209,7 @@ CDF, Atom 0.3, and Atom 1.0 feeds.") (file-name (git-file-name name version)) (sha256 (base32 - "1qxs1sbyx894njw4f898wzc5shjj85h9kgz95p8mq1acmazhlhkv")))) + "0m500f40b4dmw1nsjhci7v4jxk8fsn2pp0xkiw2s13rmdnqar31s")))) (build-system gnu-build-system) (arguments '(#:modules ((guix build utils) @@ -4253,6 +4253,7 @@ CDF, Atom 0.3, and Atom 1.0 feeds.") "guix-data-service-process-branch-updated-mbox" "guix-data-service-process-job" "guix-data-service-process-jobs" + "guix-data-service-manage-build-servers" "guix-data-service-query-build-servers")) #t))) (delete 'strip)))) ; As the .go files aren't compatible @@ -4286,13 +4287,14 @@ PostgreSQL database.") (name "gumbo-parser") (version "0.10.1") (source (origin - (method url-fetch) - (uri (string-append "https://github.com/google/" - "gumbo-parser/archive/v" version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/google/gumbo-parser") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "1bgg2kbj311pqdzw2v33za7k66g1rv44kkvvnz2gnpaasi9k0ii8")))) + "0xslckwdh2i0g2qjsb6rnm8mjmbagvziz0hjlf7d1lbljfms1iw1")))) (build-system gnu-build-system) (arguments `(#:tests? #f)) ;tests require bundling googletest sources @@ -5370,16 +5372,17 @@ used to start services with both privileged and non-privileged port numbers.") (version "5.6.0") (source (origin - (method url-fetch) - (uri (string-append "https://github.com/htacg/tidy-html5/archive/" - version ".tar.gz")) - (file-name (string-append name "-" version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/htacg/tidy-html5") + (commit version))) + (file-name (git-file-name name version)) (sha256 (base32 - "0n29wcgw32rhnraj9j21ibhwi0xagmmcskhbaz8ihxly7nx3p9h8")))) + "0w175c5d1babq0w1zzdzw9gl6iqbgyq58v8587s7srp05y3hwy9k")))) (build-system cmake-build-system) (outputs '("out" - "static")) ; 1.0MiB of .a files + "static")) ; 1.3MiB of .a files (arguments `(#:tests? #f ; no tests available #:build-type "Release" @@ -5415,7 +5418,7 @@ functions of Tidy.") (define-public hiawatha (package (name "hiawatha") - (version "10.9") + (version "10.10") (source (origin (method url-fetch) @@ -5428,7 +5431,7 @@ functions of Tidy.") (list "extra/nghttp2.tgz" "mbedtls")) #t)) (sha256 - (base32 "1f2j2x1ziawz8ijg3s3izqpyzpiwfyhlsvbv0szxvhvj4a0l7pbl")))) + (base32 "1nd46cx1qp5lh2kwnn2mlwk9zm8jm7pgf90xs9vpwr7saxbnzr5m")))) (build-system cmake-build-system) (arguments `(#:tests? #f ; no tests included @@ -6553,12 +6556,14 @@ container."))) (name "java-jsoup") (version "1.10.3") (source (origin - (method url-fetch) - (uri (string-append "https://github.com/jhy/jsoup/archive/jsoup-" - version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/jhy/jsoup") + (commit (string-append "jsoup-" version)))) + (file-name (git-file-name name version)) (sha256 (base32 - "0xbzw7rjv7s4nz1xk9b2cnin6zkpaldmc3svk71waa7hhjgp0a20")))) + "1hdpdx0x140r5x3yc251v7dj1h4j5a7nh9k885aw9q5vvz49lkf4")))) (build-system ant-build-system) (arguments `(#:jar-name "jsoup.jar" @@ -7011,3 +7016,36 @@ endpoint that will be used to trigger the task. Poussetaches makes HTTP requests with the registered payload until the right status code is returned.") (license license:isc))) + +(define-public htmlcxx + (package + (name "htmlcxx") + (version "0.87") + (source + (origin + (method url-fetch) + (uri + (string-append "mirror://sourceforge/htmlcxx/v" + version "/htmlcxx-" version ".tar.gz")) + (sha256 + (base32 "1j3mzjlczjrk4ahc43s6kzpvzypzjmqz4sillnca5yadrwwgjf2x")))) + (build-system gnu-build-system) + (home-page "http://htmlcxx.sourceforge.net/") + (synopsis "Simple non-validating CSS1 and HTML parser for C++") + (description "htmlcxx is a simple non-validating CSS1 and HTML parser for +C++. Although there are several other HTML parsers available, htmlcxx has some +characteristics that make it unique: +@itemize +@item STL like navigation of DOM tree, using excelent's tree.hh library from +Kasper Peeters +@item It is possible to reproduce exactly, character by character, the original +document from the parse tree +@item Bundled CSS parser +@item Optional parsing of attributes +@item C++ code that looks like C++ (not so true anymore) +@item Offsets of tags/elements in the original document are stored in the nodes +of the DOM tree +@end itemize") + (license (list license:lgpl2.0 + license:gpl2 + license:asl2.0)))) diff --git a/gnu/packages/wget.scm b/gnu/packages/wget.scm index 1501ea2746..3d4ea9456f 100644 --- a/gnu/packages/wget.scm +++ b/gnu/packages/wget.scm @@ -133,7 +133,7 @@ in downloaded documents to relative links.") (description "@code{wgetpaste} is an extremely simple command-line interface to various online pastebin services.") - (license license:public-domain))) + (license license:expat))) (define-public wget2 (package diff --git a/gnu/packages/wine.scm b/gnu/packages/wine.scm index d2c0bf0a44..258980803a 100644 --- a/gnu/packages/wine.scm +++ b/gnu/packages/wine.scm @@ -44,6 +44,7 @@ #:use-module (gnu packages fontutils) #:use-module (gnu packages flex) #:use-module (gnu packages image) + #:use-module (gnu packages gcc) #:use-module (gnu packages gettext) #:use-module (gnu packages ghostscript) #:use-module (gnu packages gl) @@ -75,7 +76,7 @@ (define-public wine (package (name "wine") - (version "4.0.2") + (version "4.0.3") (source (origin (method url-fetch) (uri (string-append "https://dl.winehq.org/wine/source/" @@ -83,7 +84,7 @@ "/wine-" version ".tar.xz")) (sha256 (base32 - "0x5x9pvhryzhq1m7i8gx5wwwj341zz05zymadlhfw5w45xlm0h4r")))) + "1nhgw1wm613ln9dhjm0d03zs5adcmnqr2b50p21jbmm5k2gns0i5")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config) ("gettext" ,gettext-minimal) @@ -154,7 +155,7 @@ #:phases (modify-phases %standard-phases - ;; Explicitely set the 32-bit version of vulkan-loader when installing + ;; Explicitly set the 32-bit version of vulkan-loader when installing ;; to i686-linux or x86_64-linux. ;; TODO: Add more JSON files as they become available in Mesa. ,@(match (%current-system) @@ -216,7 +217,7 @@ integrate Windows applications into your desktop.") (string-append "libdir=" %output "/lib/wine64")) #:phases (modify-phases %standard-phases - ;; Explicitely set both the 64-bit and 32-bit versions of vulkan-loader + ;; Explicitly set both the 64-bit and 32-bit versions of vulkan-loader ;; when installing to x86_64-linux so both are available. ;; TODO: Add more JSON files as they become available in Mesa. ,@(match (%current-system) @@ -390,7 +391,7 @@ integrate Windows applications into your desktop.") (arguments `(#:phases (modify-phases %standard-phases - ;; Explicitely set the 32-bit version of vulkan-loader when installing + ;; Explicitly set the 32-bit version of vulkan-loader when installing ;; to i686-linux or x86_64-linux. ;; TODO: Add more JSON files as they become available in Mesa. ,@(match (%current-system) @@ -463,7 +464,7 @@ integrated into the main branch.") (string-append "libdir=" %output "/lib/wine64")) #:phases (modify-phases %standard-phases - ;; Explicitely set both the 64-bit and 32-bit versions of vulkan-loader + ;; Explicitly set both the 64-bit and 32-bit versions of vulkan-loader ;; when installing to x86_64-linux so both are available. ;; TODO: Add more JSON files as they become available in Mesa. ,@(match (%current-system) @@ -549,7 +550,7 @@ version)") ;; This package provides 32-bit dxvk libraries on 64-bit systems. (package (name "dxvk32") - (version "1.4.4") + (version "1.5") (home-page "https://github.com/doitsujin/dxvk/") (source (origin (method git-fetch) @@ -559,7 +560,7 @@ version)") (file-name (git-file-name name version)) (sha256 (base32 - "0zr8hqyig18q4wp96cmfrkrgxxbgxida6k8cv6qbbldni29qy20w")))) + "009p99jkskrmy186gsqrf0p3v9z3lskw51r4vdp35af057q26a6x")))) (build-system meson-build-system) (arguments `(#:system "i686-linux" @@ -567,10 +568,14 @@ version)") (string-append (assoc-ref %build-inputs "source") "/build-wine32.txt")))) (native-inputs - `(("glslang" ,glslang) - ("wine" ,wine))) - (synopsis "Vulkan-based D3D11 and D3D10 implementation for Wine") - (description "A Vulkan-based translation layer for Direct3D 10/11 which + ;; Since 1.5 dxvk needs gcc-8.1. See + ;; https://github.com/doitsujin/dxvk/issues/1292#issuecomment-567067373. + `(("gcc" ,gcc-9) + ("glslang" ,glslang))) + (inputs + `(("wine" ,wine-staging))) + (synopsis "Vulkan-based D3D9, D3D10 and D3D11 implementation for Wine") + (description "A Vulkan-based translation layer for Direct3D 9/10/11 which allows running complex 3D applications with high performance using Wine. Use @command{setup_dxvk} to install the required libraries to a Wine prefix.") @@ -615,14 +620,15 @@ Use @command{setup_dxvk} to install the required libraries to a Wine prefix.") ("x86_64-linux" "../lib32") (_ "../lib"))) (("x64") "../lib")))))))) - (native-inputs - `(("glslang" ,glslang))) (inputs `(("wine" ,(match (%current-system) - ("x86_64-linux" wine64) + ;; ("x86_64-linux" wine64) + ("x86_64-linux" wine64-staging) + ;; ("x86_64-linux" mingw-w64-x86_64) (_ wine))) ,@(match (%current-system) ("x86_64-linux" `(("dxvk32" ,dxvk32))) - (_ '())))) + (_ '())) + )) (supported-systems '("i686-linux" "x86_64-linux")))) diff --git a/gnu/packages/wm.scm b/gnu/packages/wm.scm index 4bf621ee27..7d11a048f2 100644 --- a/gnu/packages/wm.scm +++ b/gnu/packages/wm.scm @@ -28,8 +28,9 @@ ;;; Copyright © 2018, 2019 Pierre Langlois <pierre.langlois@gmx.com> ;;; Copyright © 2016, 2017 Andy Patterson <ajpatter@uwaterloo.ca> ;;; Copyright © 2019 Evan Straw <evan.straw99@gmail.com> -;;; Copyright © 2019 Brett Gilio <brettg@posteo.net> +;;; Copyright © 2019 Brett Gilio <brettg@gnu.org> ;;; Copyright © 2019 Noodles! <nnoodle@chiru.no> +;;; Copyright © 2019 Alexandru-Sergiu Marton <brown121407@member.fsf.org> ;;; ;;; This file is part of GNU Guix. ;;; @@ -331,6 +332,35 @@ i3 uses a plain-text configuration file, and can be extended and controlled from many programming languages.") (license license:bsd-3))) +(define-public i3-gaps + (package (inherit i3-wm) + (name "i3-gaps") + (version "4.17.1") + (source (origin + (method url-fetch) + (uri (string-append + "https://github.com/Airblader/i3/releases/download/" + version "/i3-" version ".tar.bz2")) + (sha256 + (base32 + "0gqcr6s53dk3f2y9h6cna00rnwnh4yymk96li7lbym3d84cxjzrs")))) + (home-page "https://github.com/Airblader/i3") + (synopsis "Tiling window manager with gaps") + (description "i3-gaps is a fork of i3wm, a tiling window manager +for X11. It is kept up to date with upstream, adding a few additional +features such as gaps between windows. + +i3 is a tiling X11 window manager that dynamically manages tiled, stacked, +and tabbed window layouts. + +i3 primarily targets advanced users. Windows are managed manually and +organised inside containers, which can be split vertically or horizontally, +and optionally resized. + +i3 uses a plain-text configuration file, and can be extended and controlled +from many programming languages.") + (license license:bsd-3))) + (define-public i3lock (package (name "i3lock") @@ -659,14 +689,14 @@ tiled on several screens.") (define-public xmobar (package (name "xmobar") - (version "0.31") + (version "0.32") (source (origin (method url-fetch) (uri (string-append "mirror://hackage/package/xmobar/" "xmobar-" version ".tar.gz")) (sha256 (base32 - "1sbxva4zaj060bigmxivpn4zlz0q1qbq2np8gljdqkjvysjzpbka")))) + "0x2ki3v0pmhl4bva3qi1xx21axayc4sx1nkzhmk2ap4l0cj52jrd")))) (build-system haskell-build-system) (native-inputs `(("ghc-hspec" ,ghc-hspec) diff --git a/gnu/packages/xdisorg.scm b/gnu/packages/xdisorg.scm index f5a55e1289..081d683759 100644 --- a/gnu/packages/xdisorg.scm +++ b/gnu/packages/xdisorg.scm @@ -85,6 +85,7 @@ #:use-module (gnu packages guile) #:use-module (gnu packages xml) #:use-module (gnu packages gtk) + #:use-module (gnu packages qt) #:use-module (gnu packages xorg) #:use-module (gnu packages fontutils) #:use-module (gnu packages bison) @@ -229,6 +230,36 @@ with X11 or Wayland, or in a text terminal with ncurses.") (license (list license:gpl3+ ; client program[s] and other sources license:lgpl3+)))) ; library and bindings +(define-public copyq +(package + (name "copyq") + (version "3.9.3") + (source (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/hluk/CopyQ.git") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 + "0wlwq9xg8rzsbj0b29z358k4mbrqy04iraa8x0p26pa95yskgcma")))) + (build-system cmake-build-system) + (arguments + `(#:configure-flags '("-DCMAKE_BUILD_TYPE=Release") + #:tests? #f)) ; Test suite is a rather manual process. + (inputs + `(("qtbase" ,qtbase) + ("qtscript" ,qtscript) + ("qtsvg" ,qtsvg) + ("qtx11extras" ,qtx11extras))) + (synopsis "Clipboard manager with advanced features") + (description "CopyQ is clipboard manager with editing and scripting +features. CopyQ monitors system clipboard and saves its content in customized +tabs. Saved clipboard can be later copied and pasted directly into any +application.") + (home-page "https://hluk.github.io/CopyQ/") + (license license:gpl3+))) + (define-public xclip (package (name "xclip") diff --git a/gnu/packages/xml.scm b/gnu/packages/xml.scm index 5ccbc695ea..65e0608948 100644 --- a/gnu/packages/xml.scm +++ b/gnu/packages/xml.scm @@ -93,14 +93,14 @@ things the parser might find in the XML document (like start tags).") (define-public libebml (package (name "libebml") - (version "1.3.9") + (version "1.3.10") (source (origin (method url-fetch) (uri (string-append "https://dl.matroska.org/downloads/libebml/" "libebml-" version ".tar.xz")) (sha256 - (base32 "0j65r6i7s2k67c8f9wa653mqpxmfhdl67kjxrc1n5910ig6wddn6")))) + (base32 "0gjy5wv2hw1xhyxdgms8azs12f33ws8j7cvg8jy5k03v2bs959y6")))) (build-system cmake-build-system) (arguments `(#:configure-flags diff --git a/gnu/services/networking.scm b/gnu/services/networking.scm index 6485c08ff7..59b895d60b 100644 --- a/gnu/services/networking.scm +++ b/gnu/services/networking.scm @@ -234,14 +234,15 @@ fe80::1%lo0 apps.facebook.com\n") (define valid? (lambda (interface) (and (arp-network-interface? interface) - (not (loopback-network-interface? interface))))) + (not (loopback-network-interface? interface)) + ;; XXX: Make sure the interfaces are up so that + ;; 'dhclient' can actually send/receive over them. + ;; Ignore those that cannot be activated. + (false-if-exception + (set-network-interface-up interface))))) (define ifaces (filter valid? (all-network-interface-names))) - ;; XXX: Make sure the interfaces are up so that 'dhclient' can - ;; actually send/receive over them. - (for-each set-network-interface-up ifaces) - (false-if-exception (delete-file #$pid-file)) (let ((pid (fork+exec-command (cons* #$dhclient "-nw" diff --git a/gnu/services/web.scm b/gnu/services/web.scm index 372f4dc6fc..3ac7b7f52c 100644 --- a/gnu/services/web.scm +++ b/gnu/services/web.scm @@ -43,6 +43,7 @@ #:use-module (gnu packages gnupg) #:use-module (gnu packages guile) #:use-module (gnu packages logging) + #:use-module (gnu packages mail) #:use-module (guix packages) #:use-module (guix records) #:use-module (guix modules) @@ -256,7 +257,9 @@ patchwork-configuration-domain patchwork-virtualhost - patchwork-service-type)) + patchwork-service-type + + mumi-service-type)) ;;; Commentary: ;;; @@ -1652,3 +1655,55 @@ WSGIPassAuthorization On patchwork-getmail-configs))) (description "Patchwork patch tracking system."))) + + +;;; +;;; Mumi. +;;; + +(define %mumi-activation + (with-imported-modules '((guix build utils)) + #~(begin + (use-modules (guix build utils)) + + (mkdir-p "/var/mumi/mails") + (let* ((pw (getpwnam "mumi")) + (uid (passwd:uid pw)) + (gid (passwd:gid pw))) + (chown "/var/mumi" uid gid) + (chown "/var/mumi/mails" uid gid))))) + +(define %mumi-accounts + (list (user-group (name "mumi") (system? #t)) + (user-account + (name "mumi") + (group "mumi") + (system? #t) + (comment "Mumi web server") + (home-directory "/var/empty") + (shell (file-append shadow "/sbin/nologin"))))) + +(define (mumi-shepherd-services mumi) + (list (shepherd-service + (provision '(mumi)) + (documentation "Mumi bug-tracking web interface.") + (requirement '(networking)) + (start #~(make-forkexec-constructor + '(#$(file-append mumi "/bin/mumi")) + #:user "mumi" #:group "mumi" + #:log-file "/var/log/mumi.log")) + (stop #~(make-kill-destructor))))) + +(define mumi-service-type + (service-type + (name 'mumi) + (extensions + (list (service-extension activation-service-type + (const %mumi-activation)) + (service-extension account-service-type + (const %mumi-accounts)) + (service-extension shepherd-root-service-type + mumi-shepherd-services))) + (description + "Run Mumi, a Web interface to the Debbugs bug-tracking server.") + (default-value mumi))) diff --git a/gnu/system/vm.scm b/gnu/system/vm.scm index 8609bd2ace..81b2e06ba2 100644 --- a/gnu/system/vm.scm +++ b/gnu/system/vm.scm @@ -927,7 +927,6 @@ with '-virtfs' options for the host file systems listed in SHARED-FS." '()) "-no-reboot" - "-net nic,model=virtio" "-object" "rng-random,filename=/dev/urandom,id=guixsd-vm-rng" "-device" "virtio-rng-pci,rng=guixsd-vm-rng" @@ -1046,8 +1045,8 @@ FORWARDINGS is a list of host-port/guest-port pairs." (($ <virtual-machine> os qemu graphic? memory-size disk-image-size forwardings) (let ((options - `("-net" ,(string-append - "user," + `("-nic" ,(string-append + "user,model=virtio-net-pci," (port-forwardings->qemu-options forwardings))))) (system-qemu-image/shared-store-script os #:qemu qemu diff --git a/gnu/tests.scm b/gnu/tests.scm index 27cb39c2b9..cc72e56858 100644 --- a/gnu/tests.scm +++ b/gnu/tests.scm @@ -98,7 +98,7 @@ (or (pred x) (one-of rest ...)))))) (one-of symbol? string? keyword? pair? null? array? - number? boolean?))) + number? boolean? char?))) (match (primitive-fork) (0 |