diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/contributing.texi | 216 | ||||
| -rw-r--r-- | doc/guix.texi | 73 |
2 files changed, 234 insertions, 55 deletions
diff --git a/doc/contributing.texi b/doc/contributing.texi new file mode 100644 index 0000000000..536f223da4 --- /dev/null +++ b/doc/contributing.texi @@ -0,0 +1,216 @@ +@node Contributing +@chapter Contributing + +This project is a cooperative effort, and we need your help to make it +grow! Please get in touch with us on @email{guix-devel@@gnu.org} and +@code{#guix} on the Freenode IRC network. We welcome ideas, bug +reports, patches, and anything that may be helpful to the project. We +particularly welcome help on packaging (@pxref{Packaging Guidelines}). + +@menu +* Building from Git:: The latest and greatest. +* Running Guix Before It Is Installed:: Hacker tricks. +* The Perfect Setup:: The right tools. +* Coding Style:: Hygiene of the contributor. +* Submitting Patches:: Share your work. +@end menu + +@node Building from Git +@section Building from Git + +If you want to hack Guix itself, it is recommended to use the latest +version from the Git repository. When building Guix from a checkout, +the following packages are required in addition to those mentioned in +the installation instructions (@pxref{Requirements}). + +@itemize +@item @url{http://gnu.org/software/autoconf/, GNU Autoconf}; +@item @url{http://gnu.org/software/automake/, GNU Automake}; +@item @url{http://gnu.org/software/gettext/, GNU Gettext}; +@item @url{http://www.graphviz.org/, Graphviz}; +@item @url{http://www.gnu.org/software/help2man/, GNU Help2man (optional)}. +@end itemize + +Run @command{./bootstrap} to download the Nix daemon source code and to +generate the build system infrastructure using autoconf. It reports an +error if an inappropriate version of the above packages is being used. + +@noindent +If you get an error like this one: + +@example +configure.ac:46: error: possibly undefined macro: PKG_CHECK_MODULES +@end example + +it probably means that Autoconf couldn’t find @file{pkg.m4}, which is +provided by @command{pkg-config}. Make sure that @file{pkg.m4} is +available. For instance, if you installed Automake in +@file{/usr/local}, it wouldn’t look for @file{.m4} files in +@file{/usr/share}. So you have to invoke the following command in that +case + +@example +export ACLOCAL_PATH=/usr/share/aclocal +@end example + +See @pxref{Macro Search Path,,, automake, The GNU Automake Manual} for +more information. + +Then, run @command{./configure} as usual. + +Finally, you have to invoke @code{make check} to run tests. If anything +fails, take a look at installation instructions (@pxref{Installation}) +or send a message to the @email{guix-devel@@gnu.org, mailing list}. + + +@node Running Guix Before It Is Installed +@section Running Guix Before It Is Installed + +In order to keep a sane working environment, you will find it useful to +test the changes made in your local source tree checkout without +actually installing them. So that you can distinguish between your +``end-user'' hat and your ``motley'' costume. + +To that end, all the command-line tools can be used even if you have not +run @code{make install}. To do that, prefix each command with +@command{./pre-inst-env} (the @file{pre-inst-env} script lives in the +top build tree of Guix), as in: + +@example +$ sudo ./pre-inst-env guix-daemon --build-users-group=guixbuild +$ ./pre-inst-env guix build hello +@end example + +@noindent +Similarly, for a Guile session using the Guix modules: + +@example +$ ./pre-inst-env guile -c '(use-modules (guix utils)) (pk (%current-system))' +@end example + +The @command{pre-inst-env} script sets up all the environment variables +necessary to support this, including @env{PATH} and @env{GUILE_LOAD_PATH}. + + +@node The Perfect Setup +@section The Perfect Setup + +The Perfect Setup to hack on Guix is basically the perfect setup used +for Guile hacking (@pxref{Using Guile in Emacs,,, guile, Guile Reference +Manual}). First, you need more than an editor, you need +@url{http://www.gnu.org/software/emacs, Emacs}, empowered by the +wonderful @url{http://nongnu.org/geiser/, Geiser}. + +Geiser allows for interactive and incremental development from within +Emacs: code compilation and evaluation from within buffers, access to +on-line documentation (docstrings), context-sensitive completion, +@kbd{M-.} to jump to an object definition, a REPL to try out your code, +and more (@pxref{Introduction,,, geiser, Geiser User Manual}). For +convenient Guix development, make sure to augment Guile’s load path so +that it finds source files from your checkout: + +@lisp +;; @r{Assuming the Guix checkout is in ~/src/guix.} +(add-to-list 'geiser-guile-load-path "~/src/guix") +@end lisp + +To actually edit the code, Emacs already has a neat Scheme mode. But in +addition to that, you must not miss +@url{http://www.emacswiki.org/emacs/ParEdit, Paredit}. It provides +facilities to directly operate on the syntax tree, such as raising an +s-expression or wrapping it, swallowing or rejecting the following +s-expression, etc. + + +@node Coding Style +@section Coding Style + +In general our code follows the GNU Coding Standards (@pxref{Top,,, +standards, GNU Coding Standards}). However, they do not say much about +Scheme, so here are some additional rules. + +@menu +* Programming Paradigm:: How to compose your elements. +* Modules:: Where to store your code? +* Data Types and Pattern Matching:: Implementing data structures. +* Formatting Code:: Writing conventions. +@end menu + +@node Programming Paradigm +@subsection Programming Paradigm + +Scheme code in Guix is written in a purely functional style. One +exception is code that involves input/output, and procedures that +implement low-level concepts, such as the @code{memoize} procedure. + +@node Modules +@subsection Modules + +Guile modules that are meant to be used on the builder side must live in +the @code{(guix build @dots{})} name space. They must not refer to +other Guix or GNU modules. However, it is OK for a ``host-side'' module +to use a build-side module. + +Modules that deal with the broader GNU system should be in the +@code{(gnu @dots{})} name space rather than @code{(guix @dots{})}. + +@node Data Types and Pattern Matching +@subsection Data Types and Pattern Matching + +The tendency in classical Lisp is to use lists to represent everything, +and then to browse them ``by hand'' using @code{car}, @code{cdr}, +@code{cadr}, and co. There are several problems with that style, +notably the fact that it is hard to read, error-prone, and a hindrance +to proper type error reports. + +Guix code should define appropriate data types (for instance, using +@code{define-record-type*}) rather than abuse lists. In addition, it +should use pattern matching, via Guile’s @code{(ice-9 match)} module, +especially when matching lists. + +@node Formatting Code +@subsection Formatting Code + +When writing Scheme code, we follow common wisdom among Scheme +programmers. In general, we follow the +@url{http://mumble.net/~campbell/scheme/style.txt, Riastradh's Lisp +Style Rules}. This document happens to describe the conventions mostly +used in Guile’s code too. It is very thoughtful and well written, so +please do read it. + +Some special forms introduced in Guix, such as the @code{substitute*} +macro, have special indentation rules. These are defined in the +@file{.dir-locals.el} file, which Emacs automatically uses. If you do +not use Emacs, please make sure to let your editor know the rules. + +We require all top-level procedures to carry a docstring. This +requirement can be relaxed for simple private procedures in the +@code{(guix build @dots{})} name space, though. + +Procedures should not have more than four positional parameters. Use +keyword parameters for procedures that take more than four parameters. + + +@node Submitting Patches +@section Submitting Patches + +Development is done using the Git distributed version control system. +Thus, access to the repository is not strictly necessary. We welcome +contributions in the form of patches as produced by @code{git +format-patch} sent to the @email{guix-devel@@gnu.org, mailing list}. +Please write commit logs in the ChangeLog format (@pxref{Change Logs,,, +standards, GNU Coding Standards}); you can check the commit history for +examples. + +Before submitting a patch that adds or modifies a package definition, +please run @code{guix lint @var{package}}, where @var{package} is the +name of the new or modified package, and fix any errors it reports +(@pxref{Invoking guix lint}). In addition, please make sure the package +builds on your platform, using @code{guix build @var{package}}. You may +also want to check that dependent package (if applicable) are not +affected by the change; @code{guix refresh --list-dependent +@var{package}} will help you do that (@pxref{Invoking guix refresh}). + +When posting a patch to the mailing list, use @samp{[PATCH] @dots{}} as a +subject. You may use your email client or the @command{git send-mail} +command. diff --git a/doc/guix.texi b/doc/guix.texi index c70d1000ae..46dccb8e2b 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -13,6 +13,8 @@ Copyright @copyright{} 2012, 2013, 2014, 2015 Ludovic Courtès@* Copyright @copyright{} 2013, 2014 Andreas Enge@* Copyright @copyright{} 2013 Nikita Karetnikov@* +Copyright @copyright{} 2015 Mathieu Lirzin@* +Copyright @copyright{} 2014 Pierre-Antoine Rault@* Copyright @copyright{} 2015 Taylan Ulrich Bayırlı/Kammer Permission is granted to copy, distribute and/or modify this document @@ -88,7 +90,6 @@ Installation * Running the Test Suite:: Testing Guix. * Setting Up the Daemon:: Preparing the build daemon's environment. * Invoking guix-daemon:: Running the build daemon. -* Running Guix Before It Is Installed:: Hacker tricks. Setting Up the Daemon @@ -177,6 +178,21 @@ Packaging Guidelines * Perl Modules:: Little pearls. * Fonts:: Fond of fonts. +Contributing + +* Building from Git:: The latest and greatest. +* Running Guix Before It Is Installed:: Hacker tricks. +* The Perfect Setup:: The right tools. +* Coding Style:: Hygiene of the contributor. +* Submitting Patches:: Share your work. + +Coding Style + +* Programming Paradigm:: How to compose your elements. +* Modules:: Where to store your code? +* Data Types and Pattern Matching:: Implementing data structures. +* Formatting Code:: Writing conventions. + @end detailmenu @end menu @@ -253,7 +269,6 @@ instead, you want to install the complete GNU operating system, * Running the Test Suite:: Testing Guix. * Setting Up the Daemon:: Preparing the build daemon's environment. * Invoking guix-daemon:: Running the build daemon. -* Running Guix Before It Is Installed:: Hacker tricks. @end menu @node Binary Installation @@ -847,44 +862,6 @@ useful in exceptional circumstances, such as if you need to run several daemons on the same machine. @end table -@node Running Guix Before It Is Installed -@section Running Guix Before It Is Installed - -If you are hacking Guix itself---which is a good idea!---you will find -it useful to test the changes made in your local source tree checkout -without actually installing them. - -To that end, all the command-line tools can be used even if you have not -run @command{make install}. To do that, prefix each command with -@command{./pre-inst-env} (the @file{pre-inst-env} script lives in the -top build tree of Guix), as in: - -@example -$ sudo ./pre-inst-env guix-daemon --build-users-group=guixbuild -$ ./pre-inst-env guix build hello -@end example - -@noindent -Similarly, for a Guile session using the Guix modules: - -@example -$ ./pre-inst-env guile -c '(use-modules (guix utils)) (pk (%current-system))' -@end example - -The @command{pre-inst-env} script sets up all the environment variables -necessary to support this, including @code{PATH} and -@code{GUILE_LOAD_PATH}. - -If you are hacking Guix from Emacs using the wonderful Geiser -(@pxref{Introduction,,, geiser, Geiser User Manual}), make sure to -augment Guile's load path so that it finds source files from your -checkout: - -@lisp -;; Assuming the Guix checkout is in ~/src/guix. -(add-to-list 'geiser-guile-load-path "~/src/guix") -@end lisp - @c ********************************************************************* @node Package Management @@ -6788,22 +6765,8 @@ Second, some of the required packages could fail to build for that platform. Lastly, the generated binaries could be broken for some reason. - @c ********************************************************************* -@node Contributing -@chapter Contributing - -This project is a cooperative effort, and we need your help to make it -grow! Please get in touch with us on @email{guix-devel@@gnu.org} and -@code{#guix} on the Freenode IRC network. We welcome ideas, bug -reports, patches, and anything that may be helpful to the project. We -particularly welcome help on packaging (@pxref{Packaging Guidelines}). - -Please see the -@url{http://git.savannah.gnu.org/cgit/guix.git/tree/HACKING, -@file{HACKING} file} that comes with the Guix source code for practical -details about contributions. - +@include contributing.texi @c ********************************************************************* @node Acknowledgments |