diff options
Diffstat (limited to 'doc/guix.texi')
| -rw-r--r-- | doc/guix.texi | 1018 |
1 files changed, 526 insertions, 492 deletions
diff --git a/doc/guix.texi b/doc/guix.texi index 6980672094..1ac077d98a 100644 --- a/doc/guix.texi +++ b/doc/guix.texi @@ -119,6 +119,7 @@ Project}. * Installation:: Installing Guix. * System Installation:: Installing the whole operating system. * Package Management:: Package installation, upgrade, etc. +* Development:: Guix-aided software development. * Programming Interface:: Using Guix in Scheme. * Utilities:: Package management commands. * System Configuration:: Configuring the operating system. @@ -137,6 +138,11 @@ Project}. @detailmenu --- The Detailed Node Listing --- +Introduction + +* Managing Software the Guix Way:: What's special. +* GNU Distribution:: The packages and tools. + Installation * Binary Installation:: Getting Guix running in no time! @@ -159,7 +165,7 @@ System Installation * USB Stick and DVD Installation:: Preparing the installation medium. * Preparing for Installation:: Networking, partitioning, etc. * Proceeding with the Installation:: The real thing. -* Installing Guix in a VM:: Guix System playground. +* Installing Guix in a VM:: Guix System playground. * Building the Installation Image:: How this comes to be. Package Management @@ -173,7 +179,6 @@ Package Management * Channels:: Customizing the package collection. * Inferiors:: Interacting with another revision of Guix. * Invoking guix describe:: Display information about your Guix revision. -* Invoking guix pack:: Creating software bundles. * Invoking guix archive:: Exporting and importing store files. Substitutes @@ -185,6 +190,11 @@ Substitutes * Substitution Failure:: What happens when substitution fails. * On Trusting Binaries:: How can you trust that binary blob? +Development + +* Invoking guix environment:: Setting up development environments. +* Invoking guix pack:: Creating software bundles. + Programming Interface * Package Modules:: Packages from the programmer's viewpoint. @@ -212,7 +222,6 @@ Utilities * Invoking guix lint:: Finding errors in package definitions. * Invoking guix size:: Profiling disk usage. * Invoking guix graph:: Visualizing the graph of packages. -* Invoking guix environment:: Setting up development environments. * Invoking guix publish:: Sharing substitutes. * Invoking guix challenge:: Challenging substitute servers. * Invoking guix copy:: Copying to and from a remote store. @@ -242,7 +251,7 @@ System Configuration * Initial RAM Disk:: Linux-Libre bootstrapping. * Bootloader Configuration:: Configuring the boot loader. * Invoking guix system:: Instantiating a system configuration. -* Running Guix in a VM:: How to run Guix System in a virtual machine. +* Running Guix in a VM:: How to run Guix System in a virtual machine. * Defining Services:: Adding new service definitions. Services @@ -309,12 +318,18 @@ group everything under the ``Guix'' banner since, after all, Guix System is readily available through the @command{guix system} command, even if you're using a different distro underneath!}. @xref{GNU Distribution}. +@menu +* Managing Software the Guix Way:: What's special. +* GNU Distribution:: The packages and tools. +@end menu + @node Managing Software the Guix Way @section Managing Software the Guix Way @cindex user interfaces Guix provides a command-line package management interface -(@pxref{Invoking guix package}), a set of command-line utilities +(@pxref{Package Management}), tools to help with software development +(@pxref{Development}), command-line utilities for more advanced usage, (@pxref{Utilities}), as well as Scheme programming interfaces (@pxref{Programming Interface}). @cindex build daemon @@ -1762,7 +1777,7 @@ available. * USB Stick and DVD Installation:: Preparing the installation medium. * Preparing for Installation:: Networking, partitioning, etc. * Proceeding with the Installation:: The real thing. -* Installing Guix in a VM:: Guix System playground. +* Installing Guix in a VM:: Guix System playground. * Building the Installation Image:: How this comes to be. @end menu @@ -2431,7 +2446,6 @@ guix package -i emacs-guix * Channels:: Customizing the package collection. * Inferiors:: Interacting with another revision of Guix. * Invoking guix describe:: Display information about your Guix revision. -* Invoking guix pack:: Creating software bundles. * Invoking guix archive:: Exporting and importing store files. @end menu @@ -4040,6 +4054,510 @@ produce a list of channel specifications in Recutils format. Display information about @var{profile}. @end table +@node Invoking guix archive +@section Invoking @command{guix archive} + +@cindex @command{guix archive} +@cindex archive +The @command{guix archive} command allows users to @dfn{export} files +from the store into a single archive, and to later @dfn{import} them on +a machine that runs Guix. +In particular, it allows store files to be transferred from one machine +to the store on another machine. + +@quotation Note +If you're looking for a way to produce archives in a format suitable for +tools other than Guix, @pxref{Invoking guix pack}. +@end quotation + +@cindex exporting store items +To export store files as an archive to standard output, run: + +@example +guix archive --export @var{options} @var{specifications}... +@end example + +@var{specifications} may be either store file names or package +specifications, as for @command{guix package} (@pxref{Invoking guix +package}). For instance, the following command creates an archive +containing the @code{gui} output of the @code{git} package and the main +output of @code{emacs}: + +@example +guix archive --export git:gui /gnu/store/...-emacs-24.3 > great.nar +@end example + +If the specified packages are not built yet, @command{guix archive} +automatically builds them. The build process may be controlled with the +common build options (@pxref{Common Build Options}). + +To transfer the @code{emacs} package to a machine connected over SSH, +one would run: + +@example +guix archive --export -r emacs | ssh the-machine guix archive --import +@end example + +@noindent +Similarly, a complete user profile may be transferred from one machine +to another like this: + +@example +guix archive --export -r $(readlink -f ~/.guix-profile) | \ + ssh the-machine guix-archive --import +@end example + +@noindent +However, note that, in both examples, all of @code{emacs} and the +profile as well as all of their dependencies are transferred (due to +@code{-r}), regardless of what is already available in the store on the +target machine. The @code{--missing} option can help figure out which +items are missing from the target store. The @command{guix copy} +command simplifies and optimizes this whole process, so this is probably +what you should use in this case (@pxref{Invoking guix copy}). + +@cindex nar, archive format +@cindex normalized archive (nar) +Archives are stored in the ``normalized archive'' or ``nar'' format, which is +comparable in spirit to `tar', but with differences +that make it more appropriate for our purposes. First, rather than +recording all Unix metadata for each file, the nar format only mentions +the file type (regular, directory, or symbolic link); Unix permissions +and owner/group are dismissed. Second, the order in which directory +entries are stored always follows the order of file names according to +the C locale collation order. This makes archive production fully +deterministic. + +When exporting, the daemon digitally signs the contents of the archive, +and that digital signature is appended. When importing, the daemon +verifies the signature and rejects the import in case of an invalid +signature or if the signing key is not authorized. +@c FIXME: Add xref to daemon doc about signatures. + +The main options are: + +@table @code +@item --export +Export the specified store files or packages (see below.) Write the +resulting archive to the standard output. + +Dependencies are @emph{not} included in the output, unless +@code{--recursive} is passed. + +@item -r +@itemx --recursive +When combined with @code{--export}, this instructs @command{guix +archive} to include dependencies of the given items in the archive. +Thus, the resulting archive is self-contained: it contains the closure +of the exported store items. + +@item --import +Read an archive from the standard input, and import the files listed +therein into the store. Abort if the archive has an invalid digital +signature, or if it is signed by a public key not among the authorized +keys (see @code{--authorize} below.) + +@item --missing +Read a list of store file names from the standard input, one per line, +and write on the standard output the subset of these files missing from +the store. + +@item --generate-key[=@var{parameters}] +@cindex signing, archives +Generate a new key pair for the daemon. This is a prerequisite before +archives can be exported with @code{--export}. Note that this operation +usually takes time, because it needs to gather enough entropy to +generate the key pair. + +The generated key pair is typically stored under @file{/etc/guix}, in +@file{signing-key.pub} (public key) and @file{signing-key.sec} (private +key, which must be kept secret.) When @var{parameters} is omitted, +an ECDSA key using the Ed25519 curve is generated, or, for Libgcrypt +versions before 1.6.0, it is a 4096-bit RSA key. +Alternatively, @var{parameters} can specify +@code{genkey} parameters suitable for Libgcrypt (@pxref{General +public-key related Functions, @code{gcry_pk_genkey},, gcrypt, The +Libgcrypt Reference Manual}). + +@item --authorize +@cindex authorizing, archives +Authorize imports signed by the public key passed on standard input. +The public key must be in ``s-expression advanced format''---i.e., the +same format as the @file{signing-key.pub} file. + +The list of authorized keys is kept in the human-editable file +@file{/etc/guix/acl}. The file contains +@url{http://people.csail.mit.edu/rivest/Sexp.txt, ``advanced-format +s-expressions''} and is structured as an access-control list in the +@url{http://theworld.com/~cme/spki.txt, Simple Public-Key Infrastructure +(SPKI)}. + +@item --extract=@var{directory} +@itemx -x @var{directory} +Read a single-item archive as served by substitute servers +(@pxref{Substitutes}) and extract it to @var{directory}. This is a +low-level operation needed in only very narrow use cases; see below. + +For example, the following command extracts the substitute for Emacs +served by @code{@value{SUBSTITUTE-SERVER}} to @file{/tmp/emacs}: + +@example +$ wget -O - \ + https://@value{SUBSTITUTE-SERVER}/nar/@dots{}-emacs-24.5 \ + | bunzip2 | guix archive -x /tmp/emacs +@end example + +Single-item archives are different from multiple-item archives produced +by @command{guix archive --export}; they contain a single store item, +and they do @emph{not} embed a signature. Thus this operation does +@emph{no} signature verification and its output should be considered +unsafe. + +The primary purpose of this operation is to facilitate inspection of +archive contents coming from possibly untrusted substitute servers. + +@end table + + +@c ********************************************************************* +@node Development +@chapter Development + +@cindex software development +If you are a software developer, Guix provides tools that you should find +helpful---independently of the language you're developing in. This is what +this chapter is about. + +The @command{guix environment} command provides a convenient way to set up +@dfn{development environments} containing all the dependencies and tools +necessary to work on the software package of your choice. The @command{guix +pack} command allows you to create @dfn{application bundles} that can be +easily distributed to users who do not run Guix. + +@menu +* Invoking guix environment:: Setting up development environments. +* Invoking guix pack:: Creating software bundles. +@end menu + +@node Invoking guix environment +@section Invoking @command{guix environment} + +@cindex reproducible build environments +@cindex development environments +@cindex @command{guix environment} +@cindex environment, package build environment +The purpose of @command{guix environment} is to assist hackers in +creating reproducible development environments without polluting their +package profile. The @command{guix environment} tool takes one or more +packages, builds all of their inputs, and creates a shell +environment to use them. + +The general syntax is: + +@example +guix environment @var{options} @var{package}@dots{} +@end example + +The following example spawns a new shell set up for the development of +GNU@tie{}Guile: + +@example +guix environment guile +@end example + +If the needed dependencies are not built yet, @command{guix environment} +automatically builds them. The environment of the new shell is an augmented +version of the environment that @command{guix environment} was run in. +It contains the necessary search paths for building the given package +added to the existing environment variables. To create a ``pure'' +environment, in which the original environment variables have been unset, +use the @code{--pure} option@footnote{Users sometimes wrongfully augment +environment variables such as @code{PATH} in their @file{~/.bashrc} +file. As a consequence, when @code{guix environment} launches it, Bash +may read @file{~/.bashrc}, thereby introducing ``impurities'' in these +environment variables. It is an error to define such environment +variables in @file{.bashrc}; instead, they should be defined in +@file{.bash_profile}, which is sourced only by log-in shells. +@xref{Bash Startup Files,,, bash, The GNU Bash Reference Manual}, for +details on Bash start-up files.}. + +@vindex GUIX_ENVIRONMENT +@command{guix environment} defines the @code{GUIX_ENVIRONMENT} +variable in the shell it spawns; its value is the file name of the +profile of this environment. This allows users to, say, define a +specific prompt for development environments in their @file{.bashrc} +(@pxref{Bash Startup Files,,, bash, The GNU Bash Reference Manual}): + +@example +if [ -n "$GUIX_ENVIRONMENT" ] +then + export PS1="\u@@\h \w [dev]\$ " +fi +@end example + +@noindent +...@: or to browse the profile: + +@example +$ ls "$GUIX_ENVIRONMENT/bin" +@end example + +Additionally, more than one package may be specified, in which case the +union of the inputs for the given packages are used. For example, the +command below spawns a shell where all of the dependencies of both Guile +and Emacs are available: + +@example +guix environment guile emacs +@end example + +Sometimes an interactive shell session is not desired. An arbitrary +command may be invoked by placing the @code{--} token to separate the +command from the rest of the arguments: + +@example +guix environment guile -- make -j4 +@end example + +In other situations, it is more convenient to specify the list of +packages needed in the environment. For example, the following command +runs @command{python} from an environment containing Python@tie{}2.7 and +NumPy: + +@example +guix environment --ad-hoc python2-numpy python-2.7 -- python +@end example + +Furthermore, one might want the dependencies of a package and also some +additional packages that are not build-time or runtime dependencies, but +are useful when developing nonetheless. Because of this, the +@code{--ad-hoc} flag is positional. Packages appearing before +@code{--ad-hoc} are interpreted as packages whose dependencies will be +added to the environment. Packages appearing after are interpreted as +packages that will be added to the environment directly. For example, +the following command creates a Guix development environment that +additionally includes Git and strace: + +@example +guix environment guix --ad-hoc git strace +@end example + +Sometimes it is desirable to isolate the environment as much as +possible, for maximal purity and reproducibility. In particular, when +using Guix on a host distro that is not Guix System, it is desirable to +prevent access to @file{/usr/bin} and other system-wide resources from +the development environment. For example, the following command spawns +a Guile REPL in a ``container'' where only the store and the current +working directory are mounted: + +@example +guix environment --ad-hoc --container guile -- guile +@end example + +@quotation Note +The @code{--container} option requires Linux-libre 3.19 or newer. +@end quotation + +The available options are summarized below. + +@table @code +@item --root=@var{file} +@itemx -r @var{file} +@cindex persistent environment +@cindex garbage collector root, for environments +Make @var{file} a symlink to the profile for this environment, and +register it as a garbage collector root. + +This is useful if you want to protect your environment from garbage +collection, to make it ``persistent''. + +When this option is omitted, the environment is protected from garbage +collection only for the duration of the @command{guix environment} +session. This means that next time you recreate the same environment, +you could have to rebuild or re-download packages. @xref{Invoking guix +gc}, for more on GC roots. + +@item --expression=@var{expr} +@itemx -e @var{expr} +Create an environment for the package or list of packages that +@var{expr} evaluates to. + +For example, running: + +@example +guix environment -e '(@@ (gnu packages maths) petsc-openmpi)' +@end example + +starts a shell with the environment for this specific variant of the +PETSc package. + +Running: + +@example +guix environment --ad-hoc -e '(@@ (gnu) %base-packages)' +@end example + +starts a shell with all the base system packages available. + +The above commands only use the default output of the given packages. +To select other outputs, two element tuples can be specified: + +@example +guix environment --ad-hoc -e '(list (@@ (gnu packages bash) bash) "include")' +@end example + +@item --load=@var{file} +@itemx -l @var{file} +Create an environment for the package or list of packages that the code +within @var{file} evaluates to. + +As an example, @var{file} might contain a definition like this +(@pxref{Defining Packages}): + +@example +@verbatiminclude environment-gdb.scm +@end example + +@item --manifest=@var{file} +@itemx -m @var{file} +Create an environment for the packages contained in the manifest object +returned by the Scheme code in @var{file}. + +This is similar to the same-named option in @command{guix package} +(@pxref{profile-manifest, @option{--manifest}}) and uses the same +manifest files. + +@item --ad-hoc +Include all specified packages in the resulting environment, as if an +@i{ad hoc} package were defined with them as inputs. This option is +useful for quickly creating an environment without having to write a +package expression to contain the desired inputs. + +For instance, the command: + +@example +guix environment --ad-hoc guile guile-sdl -- guile +@end example + +runs @command{guile} in an environment where Guile and Guile-SDL are +available. + +Note that this example implicitly asks for the default output of +@code{guile} and @code{guile-sdl}, but it is possible to ask for a +specific output---e.g., @code{glib:bin} asks for the @code{bin} output +of @code{glib} (@pxref{Packages with Multiple Outputs}). + +This option may be composed with the default behavior of @command{guix +environment}. Packages appearing before @code{--ad-hoc} are interpreted +as packages whose dependencies will be added to the environment, the +default behavior. Packages appearing after are interpreted as packages +that will be added to the environment directly. + +@item --pure +Unset existing environment variables when building the new environment. +This has the effect of creating an environment in which search paths +only contain package inputs. + +@item --search-paths +Display the environment variable definitions that make up the +environment. + +@item --system=@var{system} +@itemx -s @var{system} +Attempt to build for @var{system}---e.g., @code{i686-linux}. + +@item --container +@itemx -C +@cindex container +Run @var{command} within an isolated container. The current working +directory outside the container is mapped inside the container. +Additionally, unless overridden with @code{--user}, a dummy home +directory is created that matches the current user's home directory, and +@file{/etc/passwd} is configured accordingly. The spawned process runs +as the current user outside the container, but has root privileges in +the context of the container. + +@item --network +@itemx -N +For containers, share the network namespace with the host system. +Containers created without this flag only have access to the loopback +device. + +@item --link-profile +@itemx -P +For containers, link the environment profile to +@file{~/.guix-profile} within the container. This is equivalent to +running the command @command{ln -s $GUIX_ENVIRONMENT ~/.guix-profile} +within the container. Linking will fail and abort the environment if +the directory already exists, which will certainly be the case if +@command{guix environment} was invoked in the user's home directory. + +Certain packages are configured to look in +@code{~/.guix-profile} for configuration files and data;@footnote{For +example, the @code{fontconfig} package inspects +@file{~/.guix-profile/share/fonts} for additional fonts.} +@code{--link-profile} allows these programs to behave as expected within +the environment. + +@item --user=@var{user} +@itemx -u @var{user} +For containers, use the username @var{user} in place of the current +user. The generated @file{/etc/passwd} entry within the container will +contain the name @var{user}; the home directory will be +@file{/home/USER}; and no user GECOS data will be copied. @var{user} +need not exist on the system. + +Additionally, any shared or exposed path (see @code{--share} and +@code{--expose} respectively) whose target is within the current user's +home directory will be remapped relative to @file{/home/USER}; this +includes the automatic mapping of the current working directory. + +@example +# will expose paths as /home/foo/wd, /home/foo/test, and /home/foo/target +cd $HOME/wd +guix environment --container --user=foo \ + --expose=$HOME/test \ + --expose=/tmp/target=$HOME/target +@end example + +While this will limit the leaking of user identity through home paths +and each of the user fields, this is only one useful component of a +broader privacy/anonymity solution---not one in and of itself. + +@item --expose=@var{source}[=@var{target}] +For containers, expose the file system @var{source} from the host system +as the read-only file system @var{target} within the container. If +@var{target} is not specified, @var{source} is used as the target mount +point in the container. + +The example below spawns a Guile REPL in a container in which the user's +home directory is accessible read-only via the @file{/exchange} +directory: + +@example +guix environment --container --expose=$HOME=/exchange --ad-hoc guile -- guile +@end example + +@item --share=@var{source}[=@var{target}] +For containers, share the file system @var{source} from the host system +as the writable file system @var{target} within the container. If +@var{target} is not specified, @var{source} is used as the target mount +point in the container. + +The example below spawns a Guile REPL in a container in which the user's +home directory is accessible for both reading and writing via the +@file{/exchange} directory: + +@example +guix environment --container --share=$HOME=/exchange --ad-hoc guile -- guile +@end example +@end table + +@command{guix environment} +also supports all of the common build options that @command{guix +build} supports (@pxref{Common Build Options}) as well as package +transformation options (@pxref{Package Transformation Options}). + @node Invoking guix pack @section Invoking @command{guix pack} @@ -4267,170 +4785,6 @@ In addition, @command{guix pack} supports all the common build options options (@pxref{Package Transformation Options}). -@node Invoking guix archive -@section Invoking @command{guix archive} - -@cindex @command{guix archive} -@cindex archive -The @command{guix archive} command allows users to @dfn{export} files -from the store into a single archive, and to later @dfn{import} them on -a machine that runs Guix. -In particular, it allows store files to be transferred from one machine -to the store on another machine. - -@quotation Note -If you're looking for a way to produce archives in a format suitable for -tools other than Guix, @pxref{Invoking guix pack}. -@end quotation - -@cindex exporting store items -To export store files as an archive to standard output, run: - -@example -guix archive --export @var{options} @var{specifications}... -@end example - -@var{specifications} may be either store file names or package -specifications, as for @command{guix package} (@pxref{Invoking guix -package}). For instance, the following command creates an archive -containing the @code{gui} output of the @code{git} package and the main -output of @code{emacs}: - -@example -guix archive --export git:gui /gnu/store/...-emacs-24.3 > great.nar -@end example - -If the specified packages are not built yet, @command{guix archive} -automatically builds them. The build process may be controlled with the -common build options (@pxref{Common Build Options}). - -To transfer the @code{emacs} package to a machine connected over SSH, -one would run: - -@example -guix archive --export -r emacs | ssh the-machine guix archive --import -@end example - -@noindent -Similarly, a complete user profile may be transferred from one machine -to another like this: - -@example -guix archive --export -r $(readlink -f ~/.guix-profile) | \ - ssh the-machine guix-archive --import -@end example - -@noindent -However, note that, in both examples, all of @code{emacs} and the -profile as well as all of their dependencies are transferred (due to -@code{-r}), regardless of what is already available in the store on the -target machine. The @code{--missing} option can help figure out which -items are missing from the target store. The @command{guix copy} -command simplifies and optimizes this whole process, so this is probably -what you should use in this case (@pxref{Invoking guix copy}). - -@cindex nar, archive format -@cindex normalized archive (nar) -Archives are stored in the ``normalized archive'' or ``nar'' format, which is -comparable in spirit to `tar', but with differences -that make it more appropriate for our purposes. First, rather than -recording all Unix metadata for each file, the nar format only mentions -the file type (regular, directory, or symbolic link); Unix permissions -and owner/group are dismissed. Second, the order in which directory -entries are stored always follows the order of file names according to -the C locale collation order. This makes archive production fully -deterministic. - -When exporting, the daemon digitally signs the contents of the archive, -and that digital signature is appended. When importing, the daemon -verifies the signature and rejects the import in case of an invalid -signature or if the signing key is not authorized. -@c FIXME: Add xref to daemon doc about signatures. - -The main options are: - -@table @code -@item --export -Export the specified store files or packages (see below.) Write the -resulting archive to the standard output. - -Dependencies are @emph{not} included in the output, unless -@code{--recursive} is passed. - -@item -r -@itemx --recursive -When combined with @code{--export}, this instructs @command{guix -archive} to include dependencies of the given items in the archive. -Thus, the resulting archive is self-contained: it contains the closure -of the exported store items. - -@item --import -Read an archive from the standard input, and import the files listed -therein into the store. Abort if the archive has an invalid digital -signature, or if it is signed by a public key not among the authorized -keys (see @code{--authorize} below.) - -@item --missing -Read a list of store file names from the standard input, one per line, -and write on the standard output the subset of these files missing from -the store. - -@item --generate-key[=@var{parameters}] -@cindex signing, archives -Generate a new key pair for the daemon. This is a prerequisite before -archives can be exported with @code{--export}. Note that this operation -usually takes time, because it needs to gather enough entropy to -generate the key pair. - -The generated key pair is typically stored under @file{/etc/guix}, in -@file{signing-key.pub} (public key) and @file{signing-key.sec} (private -key, which must be kept secret.) When @var{parameters} is omitted, -an ECDSA key using the Ed25519 curve is generated, or, for Libgcrypt -versions before 1.6.0, it is a 4096-bit RSA key. -Alternatively, @var{parameters} can specify -@code{genkey} parameters suitable for Libgcrypt (@pxref{General -public-key related Functions, @code{gcry_pk_genkey},, gcrypt, The -Libgcrypt Reference Manual}). - -@item --authorize -@cindex authorizing, archives -Authorize imports signed by the public key passed on standard input. -The public key must be in ``s-expression advanced format''---i.e., the -same format as the @file{signing-key.pub} file. - -The list of authorized keys is kept in the human-editable file -@file{/etc/guix/acl}. The file contains -@url{http://people.csail.mit.edu/rivest/Sexp.txt, ``advanced-format -s-expressions''} and is structured as an access-control list in the -@url{http://theworld.com/~cme/spki.txt, Simple Public-Key Infrastructure -(SPKI)}. - -@item --extract=@var{directory} -@itemx -x @var{directory} -Read a single-item archive as served by substitute servers -(@pxref{Substitutes}) and extract it to @var{directory}. This is a -low-level operation needed in only very narrow use cases; see below. - -For example, the following command extracts the substitute for Emacs -served by @code{@value{SUBSTITUTE-SERVER}} to @file{/tmp/emacs}: - -@example -$ wget -O - \ - https://@value{SUBSTITUTE-SERVER}/nar/@dots{}-emacs-24.5 \ - | bunzip2 | guix archive -x /tmp/emacs -@end example - -Single-item archives are different from multiple-item archives produced -by @command{guix archive --export}; they contain a single store item, -and they do @emph{not} embed a signature. Thus this operation does -@emph{no} signature verification and its output should be considered -unsafe. - -The primary purpose of this operation is to facilitate inspection of -archive contents coming from possibly untrusted substitute servers. - -@end table - @c ********************************************************************* @node Programming Interface @chapter Programming Interface @@ -6976,7 +7330,6 @@ the Scheme programming interface of Guix in a convenient way. * Invoking guix lint:: Finding errors in package definitions. * Invoking guix size:: Profiling disk usage. * Invoking guix graph:: Visualizing the graph of packages. -* Invoking guix environment:: Setting up development environments. * Invoking guix publish:: Sharing substitutes. * Invoking guix challenge:: Challenging substitute servers. * Invoking guix copy:: Copying to and from a remote store. @@ -8892,325 +9245,6 @@ are some architecture-dependent bits that this option allows you to visualize. @end table -@node Invoking guix environment -@section Invoking @command{guix environment} - -@cindex reproducible build environments -@cindex development environments -@cindex @command{guix environment} -@cindex environment, package build environment -The purpose of @command{guix environment} is to assist hackers in -creating reproducible development environments without polluting their -package profile. The @command{guix environment} tool takes one or more -packages, builds all of their inputs, and creates a shell -environment to use them. - -The general syntax is: - -@example -guix environment @var{options} @var{package}@dots{} -@end example - -The following example spawns a new shell set up for the development of -GNU@tie{}Guile: - -@example -guix environment guile -@end example - -If the needed dependencies are not built yet, @command{guix environment} -automatically builds them. The environment of the new shell is an augmented -version of the environment that @command{guix environment} was run in. -It contains the necessary search paths for building the given package -added to the existing environment variables. To create a ``pure'' -environment, in which the original environment variables have been unset, -use the @code{--pure} option@footnote{Users sometimes wrongfully augment -environment variables such as @code{PATH} in their @file{~/.bashrc} -file. As a consequence, when @code{guix environment} launches it, Bash -may read @file{~/.bashrc}, thereby introducing ``impurities'' in these -environment variables. It is an error to define such environment -variables in @file{.bashrc}; instead, they should be defined in -@file{.bash_profile}, which is sourced only by log-in shells. -@xref{Bash Startup Files,,, bash, The GNU Bash Reference Manual}, for -details on Bash start-up files.}. - -@vindex GUIX_ENVIRONMENT -@command{guix environment} defines the @code{GUIX_ENVIRONMENT} -variable in the shell it spawns; its value is the file name of the -profile of this environment. This allows users to, say, define a -specific prompt for development environments in their @file{.bashrc} -(@pxref{Bash Startup Files,,, bash, The GNU Bash Reference Manual}): - -@example -if [ -n "$GUIX_ENVIRONMENT" ] -then - export PS1="\u@@\h \w [dev]\$ " -fi -@end example - -@noindent -...@: or to browse the profile: - -@example -$ ls "$GUIX_ENVIRONMENT/bin" -@end example - -Additionally, more than one package may be specified, in which case the -union of the inputs for the given packages are used. For example, the -command below spawns a shell where all of the dependencies of both Guile -and Emacs are available: - -@example -guix environment guile emacs -@end example - -Sometimes an interactive shell session is not desired. An arbitrary -command may be invoked by placing the @code{--} token to separate the -command from the rest of the arguments: - -@example -guix environment guile -- make -j4 -@end example - -In other situations, it is more convenient to specify the list of -packages needed in the environment. For example, the following command -runs @command{python} from an environment containing Python@tie{}2.7 and -NumPy: - -@example -guix environment --ad-hoc python2-numpy python-2.7 -- python -@end example - -Furthermore, one might want the dependencies of a package and also some -additional packages that are not build-time or runtime dependencies, but -are useful when developing nonetheless. Because of this, the -@code{--ad-hoc} flag is positional. Packages appearing before -@code{--ad-hoc} are interpreted as packages whose dependencies will be -added to the environment. Packages appearing after are interpreted as -packages that will be added to the environment directly. For example, -the following command creates a Guix development environment that -additionally includes Git and strace: - -@example -guix environment guix --ad-hoc git strace -@end example - -Sometimes it is desirable to isolate the environment as much as -possible, for maximal purity and reproducibility. In particular, when -using Guix on a host distro that is not Guix System, it is desirable to -prevent access to @file{/usr/bin} and other system-wide resources from -the development environment. For example, the following command spawns -a Guile REPL in a ``container'' where only the store and the current -working directory are mounted: - -@example -guix environment --ad-hoc --container guile -- guile -@end example - -@quotation Note -The @code{--container} option requires Linux-libre 3.19 or newer. -@end quotation - -The available options are summarized below. - -@table @code -@item --root=@var{file} -@itemx -r @var{file} -@cindex persistent environment -@cindex garbage collector root, for environments -Make @var{file} a symlink to the profile for this environment, and -register it as a garbage collector root. - -This is useful if you want to protect your environment from garbage -collection, to make it ``persistent''. - -When this option is omitted, the environment is protected from garbage -collection only for the duration of the @command{guix environment} -session. This means that next time you recreate the same environment, -you could have to rebuild or re-download packages. @xref{Invoking guix -gc}, for more on GC roots. - -@item --expression=@var{expr} -@itemx -e @var{expr} -Create an environment for the package or list of packages that -@var{expr} evaluates to. - -For example, running: - -@example -guix environment -e '(@@ (gnu packages maths) petsc-openmpi)' -@end example - -starts a shell with the environment for this specific variant of the -PETSc package. - -Running: - -@example -guix environment --ad-hoc -e '(@@ (gnu) %base-packages)' -@end example - -starts a shell with all the base system packages available. - -The above commands only use the default output of the given packages. -To select other outputs, two element tuples can be specified: - -@example -guix environment --ad-hoc -e '(list (@@ (gnu packages bash) bash) "include")' -@end example - -@item --load=@var{file} -@itemx -l @var{file} -Create an environment for the package or list of packages that the code -within @var{file} evaluates to. - -As an example, @var{file} might contain a definition like this -(@pxref{Defining Packages}): - -@example -@verbatiminclude environment-gdb.scm -@end example - -@item --manifest=@var{file} -@itemx -m @var{file} -Create an environment for the packages contained in the manifest object -returned by the Scheme code in @var{file}. - -This is similar to the same-named option in @command{guix package} -(@pxref{profile-manifest, @option{--manifest}}) and uses the same -manifest files. - -@item --ad-hoc -Include all specified packages in the resulting environment, as if an -@i{ad hoc} package were defined with them as inputs. This option is -useful for quickly creating an environment without having to write a -package expression to contain the desired inputs. - -For instance, the command: - -@example -guix environment --ad-hoc guile guile-sdl -- guile -@end example - -runs @command{guile} in an environment where Guile and Guile-SDL are -available. - -Note that this example implicitly asks for the default output of -@code{guile} and @code{guile-sdl}, but it is possible to ask for a -specific output---e.g., @code{glib:bin} asks for the @code{bin} output -of @code{glib} (@pxref{Packages with Multiple Outputs}). - -This option may be composed with the default behavior of @command{guix -environment}. Packages appearing before @code{--ad-hoc} are interpreted -as packages whose dependencies will be added to the environment, the -default behavior. Packages appearing after are interpreted as packages -that will be added to the environment directly. - -@item --pure -Unset existing environment variables when building the new environment. -This has the effect of creating an environment in which search paths -only contain package inputs. - -@item --search-paths -Display the environment variable definitions that make up the -environment. - -@item --system=@var{system} -@itemx -s @var{system} -Attempt to build for @var{system}---e.g., @code{i686-linux}. - -@item --container -@itemx -C -@cindex container -Run @var{command} within an isolated container. The current working -directory outside the container is mapped inside the container. -Additionally, unless overridden with @code{--user}, a dummy home -directory is created that matches the current user's home directory, and -@file{/etc/passwd} is configured accordingly. The spawned process runs -as the current user outside the container, but has root privileges in -the context of the container. - -@item --network -@itemx -N -For containers, share the network namespace with the host system. -Containers created without this flag only have access to the loopback -device. - -@item --link-profile -@itemx -P -For containers, link the environment profile to -@file{~/.guix-profile} within the container. This is equivalent to -running the command @command{ln -s $GUIX_ENVIRONMENT ~/.guix-profile} -within the container. Linking will fail and abort the environment if -the directory already exists, which will certainly be the case if -@command{guix environment} was invoked in the user's home directory. - -Certain packages are configured to look in -@code{~/.guix-profile} for configuration files and data;@footnote{For -example, the @code{fontconfig} package inspects -@file{~/.guix-profile/share/fonts} for additional fonts.} -@code{--link-profile} allows these programs to behave as expected within -the environment. - -@item --user=@var{user} -@itemx -u @var{user} -For containers, use the username @var{user} in place of the current -user. The generated @file{/etc/passwd} entry within the container will -contain the name @var{user}; the home directory will be -@file{/home/USER}; and no user GECOS data will be copied. @var{user} -need not exist on the system. - -Additionally, any shared or exposed path (see @code{--share} and -@code{--expose} respectively) whose target is within the current user's -home directory will be remapped relative to @file{/home/USER}; this -includes the automatic mapping of the current working directory. - -@example -# will expose paths as /home/foo/wd, /home/foo/test, and /home/foo/target -cd $HOME/wd -guix environment --container --user=foo \ - --expose=$HOME/test \ - --expose=/tmp/target=$HOME/target -@end example - -While this will limit the leaking of user identity through home paths -and each of the user fields, this is only one useful component of a -broader privacy/anonymity solution---not one in and of itself. - -@item --expose=@var{source}[=@var{target}] -For containers, expose the file system @var{source} from the host system -as the read-only file system @var{target} within the container. If -@var{target} is not specified, @var{source} is used as the target mount -point in the container. - -The example below spawns a Guile REPL in a container in which the user's -home directory is accessible read-only via the @file{/exchange} -directory: - -@example -guix environment --container --expose=$HOME=/exchange --ad-hoc guile -- guile -@end example - -@item --share=@var{source}[=@var{target}] -For containers, share the file system @var{source} from the host system -as the writable file system @var{target} within the container. If -@var{target} is not specified, @var{source} is used as the target mount -point in the container. - -The example below spawns a Guile REPL in a container in which the user's -home directory is accessible for both reading and writing via the -@file{/exchange} directory: - -@example -guix environment --container --share=$HOME=/exchange --ad-hoc guile -- guile -@end example -@end table - -@command{guix environment} -also supports all of the common build options that @command{guix -build} supports (@pxref{Common Build Options}) as well as package -transformation options (@pxref{Package Transformation Options}). - @node Invoking guix publish @section Invoking @command{guix publish} @@ -9892,7 +9926,7 @@ instance to support new system services. * Initial RAM Disk:: Linux-Libre bootstrapping. * Bootloader Configuration:: Configuring the boot loader. * Invoking guix system:: Instantiating a system configuration. -* Running Guix in a VM:: How to run Guix System in a virtual machine. +* Running Guix in a VM:: How to run Guix System in a virtual machine. * Defining Services:: Adding new service definitions. @end menu |