summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--gnu/bootloader/u-boot.scm6
-rw-r--r--gnu/local.mk6
-rw-r--r--gnu/packages/bootloaders.scm16
-rw-r--r--gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch1485
-rw-r--r--gnu/packages/patches/u-boot-pinebook-dts.patch388
-rw-r--r--gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch98
-rw-r--r--gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch70
-rw-r--r--gnu/packages/patches/u-boot-pinebook-syscon-node.patch38
-rw-r--r--gnu/packages/patches/u-boot-pinebook-video-bridge.patch50
-rw-r--r--gnu/system/install.scm6
10 files changed, 2163 insertions, 0 deletions
diff --git a/gnu/bootloader/u-boot.scm b/gnu/bootloader/u-boot.scm
index b5fab14e14..1c6f322bc4 100644
--- a/gnu/bootloader/u-boot.scm
+++ b/gnu/bootloader/u-boot.scm
@@ -32,6 +32,7 @@
u-boot-nintendo-nes-classic-edition-bootloader
u-boot-novena-bootloader
u-boot-pine64-plus-bootloader
+ u-boot-pinebook-bootloader
u-boot-puma-rk3399-bootloader
u-boot-wandboard-bootloader))
@@ -168,6 +169,11 @@
(inherit u-boot-allwinner64-bootloader)
(package u-boot-pine64-plus)))
+(define u-boot-pinebook-bootloader
+ (bootloader
+ (inherit u-boot-allwinner64-bootloader)
+ (package u-boot-pinebook)))
+
(define u-boot-puma-rk3399-bootloader
(bootloader
(inherit u-boot-bootloader)
diff --git a/gnu/local.mk b/gnu/local.mk
index 7fc8fb0620..c56278e933 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -1186,6 +1186,12 @@ dist_patch_DATA = \
%D%/packages/patches/totem-meson-easy-codec.patch \
%D%/packages/patches/tuxpaint-stamps-path.patch \
%D%/packages/patches/twinkle-include-qregexpvalidator.patch \
+ %D%/packages/patches/u-boot-pinebook-a64-update-dts.patch \
+ %D%/packages/patches/u-boot-pinebook-mmc-calibration.patch \
+ %D%/packages/patches/u-boot-pinebook-r_i2c-controller.patch \
+ %D%/packages/patches/u-boot-pinebook-dts.patch \
+ %D%/packages/patches/u-boot-pinebook-syscon-node.patch \
+ %D%/packages/patches/u-boot-pinebook-video-bridge.patch \
%D%/packages/patches/unrtf-CVE-2016-10091.patch \
%D%/packages/patches/unzip-CVE-2014-8139.patch \
%D%/packages/patches/unzip-CVE-2014-8140.patch \
diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm
index 328e834bc2..0c11639150 100644
--- a/gnu/packages/bootloaders.scm
+++ b/gnu/packages/bootloaders.scm
@@ -579,6 +579,22 @@ board-independent tools.")))
(define-public u-boot-pine64-plus
(make-u-boot-sunxi64-package "pine64_plus" "aarch64-linux-gnu"))
+(define-public u-boot-pinebook
+ (let ((base (make-u-boot-sunxi64-package "pinebook" "aarch64-linux-gnu")))
+ (package
+ (inherit base)
+ (source (origin
+ (inherit (package-source u-boot))
+ (patches (search-patches
+ ;; Add patches to enable Pinebook support from sunxi
+ ;; maintainer tree: git://git.denx.de/u-boot-sunxi.git
+ "u-boot-pinebook-a64-update-dts.patch"
+ "u-boot-pinebook-syscon-node.patch"
+ "u-boot-pinebook-mmc-calibration.patch"
+ "u-boot-pinebook-video-bridge.patch"
+ "u-boot-pinebook-r_i2c-controller.patch"
+ "u-boot-pinebook-dts.patch")))))))
+
(define-public u-boot-bananapi-m2-ultra
(make-u-boot-package "Bananapi_M2_Ultra" "arm-linux-gnueabihf"))
diff --git a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch b/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
new file mode 100644
index 0000000000..9d0a08c8bf
--- /dev/null
+++ b/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
@@ -0,0 +1,1485 @@
+From 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 29 Oct 2018 00:56:47 +0000
+Subject: [PATCH 03/13] sunxi: A64: Update .dts/.dtsi files
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Update the .dts/.dtsi file from the Linux sunxi/dt64-for-4.20 tree:
+commit 679294497be31596e1c9c61507746d72b6b05f26
+Author: Rodrigo Exterckötter Tjäder <rodrigo@tjader.xyz>
+Date: Wed Sep 26 19:48:24 2018 +0000
+ arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 +++++++++++++-
+ arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++-
+ arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 +++++++-
+ arch/arm/dts/sun50i-a64-olinuxino.dts | 103 ++++++++-
+ arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 ++++++++++++++-
+ arch/arm/dts/sun50i-a64-pine64.dts | 32 ++-
+ arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++-
+ arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++
+ arch/arm/dts/sun50i-a64.dtsi | 313 +++++++++++++++++++++++++--
+ 9 files changed, 920 insertions(+), 45 deletions(-)
+
+diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts b/arch/arm/dts/sun50i-a64-amarula-relic.dts
+index f3b4e93ece..6cb2b7f0c8 100644
+--- a/arch/arm/dts/sun50i-a64-amarula-relic.dts
++++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts
+@@ -22,11 +22,11 @@
+ stdout-path = "serial0:115200n8";
+ };
+
+- reg_vcc3v3: vcc3v3 {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc3v3";
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
++ wifi_pwrseq: wifi-pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&rtc 1>;
++ clock-names = "ext_clock";
++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
+ };
+ };
+
+@@ -34,10 +34,34 @@
+ status = "okay";
+ };
+
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins>;
++ vmmc-supply = <&reg_dcdc1>;
++ /*
++ * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
++ * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
++ * 0Ohm register to vcc-io-wifi so eldo1 is used.
++ */
++ vqmmc-supply = <&reg_eldo1>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ brcmf: wifi@1 {
++ reg = <1>;
++ compatible = "brcm,bcm4329-fmac";
++ interrupt-parent = <&r_pio>;
++ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */
++ interrupt-names = "host-wake";
++ };
++};
++
+ &mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+- vmmc-supply = <&reg_vcc3v3>;
++ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+@@ -48,9 +72,138 @@
+ status = "okay";
+ };
+
++&r_rsb {
++ status = "okay";
++
++ axp803: pmic@3a3 {
++ compatible = "x-powers,axp803";
++ reg = <0x3a3>;
++ interrupt-parent = <&r_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
++ };
++};
++
++#include "axp803.dtsi"
++
++&reg_aldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-name = "avdd-csi";
++};
++
++&reg_aldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pl";
++};
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <3000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-name = "vcc-pll-avcc";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-3v3";
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1040000>;
++ regulator-max-microvolt = <1300000>;
++ regulator-name = "vdd-cpux";
++};
++
++/* DCDC3 is polyphased with DCDC2 */
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1500000>;
++ regulator-name = "vcc-dram";
++};
++
++&reg_dcdc6 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-sys";
++};
++
++&reg_dldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-hdmi-dsi-sensor";
++};
++
++&reg_dldo2 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-mipi";
++};
++
++&reg_dldo3 {
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-name = "dovdd-csi";
++};
++
++&reg_dldo4 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi-io";
++};
++
++&reg_drivevbus {
++ regulator-name = "usb0-vbus";
++ status = "okay";
++};
++
++&reg_eldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "cpvdd";
++};
++
++&reg_eldo3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "dvdd-csi";
++};
++
++&reg_fldo1 {
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "vcc-1v2-hsic";
++};
++
++/*
++ * The A64 chip cannot work without this regulator off, although
++ * it seems to be only driving the AR100 core.
++ * Maybe we don't still know well about CPUs domain.
++ */
++&reg_fldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_rtc_ldo {
++ regulator-name = "vcc-rtc";
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+ };
+
+@@ -61,5 +214,6 @@
+
+ &usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
++ usb0_vbus-supply = <&reg_drivevbus>;
+ status = "okay";
+ };
+diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+index 0716b14411..ef1c90401b 100644
+--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
++++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+@@ -60,6 +60,17 @@
+ stdout-path = "serial0:115200n8";
+ };
+
++ hdmi-connector {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
+ leds {
+ compatible = "gpio-leds";
+
+@@ -86,6 +97,10 @@
+ };
+ };
+
++&de {
++ status = "okay";
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -103,6 +118,17 @@
+ status = "okay";
+ };
+
++&hdmi {
++ hvcc-supply = <&reg_dldo1>;
++ status = "okay";
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
+ &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+@@ -151,7 +177,7 @@
+
+ &mmc2 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&mmc2_pins>;
++ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+ vmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+@@ -296,9 +322,13 @@
+ regulator-name = "vcc-rtc";
+ };
+
++&simplefb_hdmi {
++ vcc-hdmi-supply = <&reg_dldo1>;
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+ };
+
+diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
+index e2dce48fa2..31884dbc88 100644
+--- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
++++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
+@@ -51,12 +51,44 @@
+ compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
+
+ aliases {
++ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ hdmi-connector {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ blue {
++ label = "nanopi-a64:blue:status";
++ gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
++ };
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&rtc 1>;
++ clock-names = "ext_clock";
++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++ };
++};
++
++&de {
++ status = "okay";
+ };
+
+ &ehci0 {
+@@ -67,6 +99,26 @@
+ status = "okay";
+ };
+
++&emac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&rgmii_pins>;
++ phy-mode = "rgmii";
++ phy-handle = <&ext_rgmii_phy>;
++ phy-supply = <&reg_dcdc1>;
++ status = "okay";
++};
++
++&hdmi {
++ hvcc-supply = <&reg_dldo1>;
++ status = "okay";
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
+ /* i2c1 connected with gpio headers like pine64, bananapi */
+ &i2c1 {
+ pinctrl-names = "default";
+@@ -78,6 +130,13 @@
+ bias-pull-up;
+ };
+
++&mdio {
++ ext_rgmii_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <7>;
++ };
++};
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+@@ -88,6 +147,24 @@
+ status = "okay";
+ };
+
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins>;
++ vmmc-supply = <&reg_dcdc1>;
++ vqmmc-supply = <&reg_dldo4>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ rtl8189etv: wifi@1 {
++ reg = <1>;
++ interrupt-parent = <&r_pio>;
++ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
++ interrupt-names = "host-wake";
++ };
++};
++
+ &ohci0 {
+ status = "okay";
+ };
+@@ -125,9 +202,9 @@
+
+ &reg_dcdc1 {
+ regulator-always-on;
+- regulator-min-microvolt = <3000000>;
+- regulator-max-microvolt = <3000000>;
+- regulator-name = "vcc-3v";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-3v3";
+ };
+
+ &reg_dcdc2 {
+@@ -195,9 +272,13 @@
+ regulator-name = "vcc-rtc";
+ };
+
++&simplefb_hdmi {
++ vcc-hdmi-supply = <&reg_dldo1>;
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+ };
+
+diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
+index 3b3081b10e..f7a4bccaa5 100644
+--- a/arch/arm/dts/sun50i-a64-olinuxino.dts
++++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
+@@ -51,6 +51,7 @@
+ compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
+
+ aliases {
++ ethernet0 = &emac;
+ serial0 = &uart0;
+ };
+
+@@ -58,12 +59,74 @@
+ stdout-path = "serial0:115200n8";
+ };
+
++ hdmi-connector {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ reg_usb1_vbus: usb1-vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb1-vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
++ status = "okay";
++ };
++
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+ };
+
++&de {
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&emac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&rgmii_pins>;
++ phy-mode = "rgmii";
++ phy-handle = <&ext_rgmii_phy>;
++ phy-supply = <&reg_dcdc1>;
++ allwinner,tx-delay-ps = <600>;
++ status = "okay";
++};
++
++&hdmi {
++ hvcc-supply = <&reg_dldo1>;
++ status = "okay";
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&mdio {
++ ext_rgmii_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ };
++};
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+@@ -92,6 +155,14 @@
+ };
+ };
+
++&ohci0 {
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
+ &r_rsb {
+ status = "okay";
+
+@@ -100,6 +171,7 @@
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+ };
+ };
+
+@@ -142,10 +214,14 @@
+
+ /* DCDC3 is polyphased with DCDC2 */
+
++/*
++ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
++ * 1.35V that the PMIC can drive.
++ */
+ &reg_dcdc5 {
+ regulator-always-on;
+- regulator-min-microvolt = <1500000>;
+- regulator-max-microvolt = <1500000>;
++ regulator-min-microvolt = <1360000>;
++ regulator-max-microvolt = <1360000>;
+ regulator-name = "vcc-ddr3";
+ };
+
+@@ -180,6 +256,11 @@
+ regulator-name = "vcc-wifi-io";
+ };
+
++&reg_drivevbus {
++ regulator-name = "usb0-vbus";
++ status = "okay";
++};
++
+ &reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+@@ -214,8 +295,24 @@
+ regulator-name = "vcc-rtc";
+ };
+
++&simplefb_hdmi {
++ vcc-hdmi-supply = <&reg_dldo1>;
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&uart0_pb_pins>;
++ status = "okay";
++};
++
++&usb_otg {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&usbphy {
+ status = "okay";
++ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
++ usb0_vbus-supply = <&reg_drivevbus>;
++ usb1_vbus-supply = <&reg_usb1_vbus>;
+ };
+diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
+index bf42690a33..b0c64f7579 100644
+--- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
++++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
+@@ -1,5 +1,6 @@
+ /*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
++ * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+@@ -51,23 +52,127 @@
+ compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
+
+ aliases {
++ ethernet0 = &emac;
+ serial0 = &uart0;
++ serial1 = &uart1;
++ serial2 = &uart2;
++ serial3 = &uart3;
++ serial4 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ hdmi-connector {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status {
++ label = "orangepi:green:status";
++ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
++ };
++ };
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
++ status = "okay";
++ };
++
++ reg_usb1_vbus: usb1-vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb1-vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
++ status = "okay";
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
++ };
++};
++
++&de {
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
+ };
+
+ &ehci1 {
+ status = "okay";
+ };
+
++&emac {
++ pinctrl-names = "default";
++ pinctrl-0 = <&rgmii_pins>;
++ phy-mode = "rgmii";
++ phy-handle = <&ext_rgmii_phy>;
++ phy-supply = <&reg_gmac_3v3>;
++ status = "okay";
++};
++
++&hdmi {
++ hvcc-supply = <&reg_dldo1>;
++ status = "okay";
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&mdio {
++ ext_rgmii_phy: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ };
++};
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
++ disable-wp;
++ bus-width = <4>;
++ status = "okay";
++};
++
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins>;
++ vmmc-supply = <&reg_dldo2>;
++ vqmmc-supply = <&reg_dldo4>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++};
++
++&ohci0 {
+ status = "okay";
+ };
+
+@@ -89,9 +194,8 @@
+ #include "axp803.dtsi"
+
+ &reg_aldo1 {
+- regulator-always-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <3300000>;
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
+ regulator-name = "afvcc-csi";
+ };
+
+@@ -163,12 +267,23 @@
+ regulator-name = "vcc-wifi-io";
+ };
+
++&reg_drivevbus {
++ regulator-name = "usb0-vbus";
++ status = "okay";
++};
++
+ &reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+ };
+
++&reg_eldo3 {
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "dvdd-csi";
++};
++
+ &reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+@@ -191,13 +306,65 @@
+ regulator-name = "vcc-rtc";
+ };
+
++&simplefb_hdmi {
++ vcc-hdmi-supply = <&reg_dldo1>;
++};
++
++&spi0 {
++ status = "okay";
++
++ spi-flash@0 {
++ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
++ reg = <0>;
++ spi-max-frequency = <80000000>;
++ m25p,fast-read;
++ status = "okay";
++ };
++};
++
++/* On debug connector */
+ &uart0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+ };
+
+-&usbphy {
++/* Bluetooth */
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
++ status = "okay";
++};
++
++/* On Pi-2 connector, RTS/CTS optional */
++&uart2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart2_pins>;
++ status = "disabled";
++};
++
++/* On Pi-2 connector, RTS/CTS optional */
++&uart3 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart3_pins>;
++ status = "disabled";
++};
++
++/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
++&uart4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart4_pins>;
++ status = "disabled";
++};
++
++&usb_otg {
++ dr_mode = "otg";
+ status = "okay";
+ };
+
++&usbphy {
++ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
++ usb0_vbus-supply = <&reg_drivevbus>;
++ usb1_vbus-supply = <&reg_usb1_vbus>;
++ status = "okay";
++};
+diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts
+index a75825798a..c077b6c1f4 100644
+--- a/arch/arm/dts/sun50i-a64-pine64.dts
++++ b/arch/arm/dts/sun50i-a64-pine64.dts
+@@ -62,6 +62,21 @@
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
++
++ hdmi-connector {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++};
++
++&de {
++ status = "okay";
+ };
+
+ &ehci0 {
+@@ -82,6 +97,17 @@
+
+ };
+
++&hdmi {
++ hvcc-supply = <&reg_dldo1>;
++ status = "okay";
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
+ &i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+@@ -229,6 +255,10 @@
+ regulator-name = "vcc-rtc";
+ };
+
++&simplefb_hdmi {
++ vcc-hdmi-supply = <&reg_dldo1>;
++};
++
+ /* On Euler connector */
+ &spdif {
+ status = "disabled";
+@@ -237,7 +267,7 @@
+ /* On Exp and Euler connectors */
+ &uart0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+ };
+
+diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
+index abe179de35..53fcc9098d 100644
+--- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
++++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
+@@ -61,6 +61,17 @@
+ stdout-path = "serial0:115200n8";
+ };
+
++ hdmi-connector {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
+ reg_vcc1v8: vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+@@ -69,6 +80,10 @@
+ };
+ };
+
++&de {
++ status = "okay";
++};
++
+ &ehci0 {
+ status = "okay";
+ };
+@@ -86,6 +101,17 @@
+ status = "okay";
+ };
+
++&hdmi {
++ hvcc-supply = <&reg_dldo1>;
++ status = "okay";
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
+ &mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+@@ -134,9 +160,13 @@
+ regulator-name = "vcc-wifi";
+ };
+
++&simplefb_hdmi {
++ vcc-hdmi-supply = <&reg_dldo1>;
++};
++
+ &uart0 {
+ pinctrl-names = "default";
+- pinctrl-0 = <&uart0_pins_a>;
++ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+ };
+
+diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi
+index 43418bd881..6723b8695e 100644
+--- a/arch/arm/dts/sun50i-a64-sopine.dtsi
++++ b/arch/arm/dts/sun50i-a64-sopine.dtsi
+@@ -45,6 +45,8 @@
+
+ #include "sun50i-a64.dtsi"
+
++#include <dt-bindings/gpio/gpio.h>
++
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+@@ -52,6 +54,7 @@
+ non-removable;
+ disable-wp;
+ bus-width = <4>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+ };
+
+@@ -66,6 +69,18 @@
+ };
+ };
+
++&spi0 {
++ status = "okay";
++
++ flash@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ spi-max-frequency = <40000000>;
++ };
++};
++
+ #include "axp803.dtsi"
+
+ &reg_aldo2 {
+diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
+index 7a083637c4..f3a66f8882 100644
+--- a/arch/arm/dts/sun50i-a64.dtsi
++++ b/arch/arm/dts/sun50i-a64.dtsi
+@@ -43,9 +43,12 @@
+ */
+
+ #include <dt-bindings/clock/sun50i-a64-ccu.h>
++#include <dt-bindings/clock/sun8i-de2.h>
+ #include <dt-bindings/clock/sun8i-r-ccu.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/sun50i-a64-ccu.h>
++#include <dt-bindings/reset/sun8i-de2.h>
++#include <dt-bindings/reset/sun8i-r-ccu.h>
+
+ / {
+ interrupt-parent = <&gic>;
+@@ -57,17 +60,21 @@
+ #size-cells = <1>;
+ ranges;
+
+-/*
+- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
+- * However there is no support for this clock on A64 yet, so we depend
+- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
+- */
+ simplefb_lcd: framebuffer-lcd {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "mixer0-lcd0";
+ clocks = <&ccu CLK_TCON0>,
+- <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
++ <&display_clocks CLK_MIXER0>;
++ status = "disabled";
++ };
++
++ simplefb_hdmi: framebuffer-hdmi {
++ compatible = "allwinner,simple-framebuffer",
++ "simple-framebuffer";
++ allwinner,pipeline = "mixer1-lcd1-hdmi";
++ clocks = <&display_clocks CLK_MIXER1>,
++ <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
+ status = "disabled";
+ };
+ };
+@@ -81,6 +88,7 @@
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
++ next-level-cache = <&L2>;
+ };
+
+ cpu1: cpu@1 {
+@@ -88,6 +96,7 @@
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
++ next-level-cache = <&L2>;
+ };
+
+ cpu2: cpu@2 {
+@@ -95,6 +104,7 @@
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
++ next-level-cache = <&L2>;
+ };
+
+ cpu3: cpu@3 {
+@@ -102,7 +112,20 @@
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
++ next-level-cache = <&L2>;
+ };
++
++ L2: l2-cache {
++ compatible = "cache";
++ cache-level = <2>;
++ };
++ };
++
++ de: display-engine {
++ compatible = "allwinner,sun50i-a64-display-engine";
++ allwinner,pipelines = <&mixer0>,
++ <&mixer1>;
++ status = "disabled";
+ };
+
+ osc24M: osc24M_clk {
+@@ -168,10 +191,92 @@
+ #size-cells = <1>;
+ ranges;
+
++ de2@1000000 {
++ compatible = "allwinner,sun50i-a64-de2";
++ reg = <0x1000000 0x400000>;
++ allwinner,sram = <&de2_sram 1>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0 0x1000000 0x400000>;
++
++ display_clocks: clock@0 {
++ compatible = "allwinner,sun50i-a64-de2-clk";
++ reg = <0x0 0x100000>;
++ clocks = <&ccu CLK_DE>,
++ <&ccu CLK_BUS_DE>;
++ clock-names = "mod",
++ "bus";
++ resets = <&ccu RST_BUS_DE>;
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ };
++
++ mixer0: mixer@100000 {
++ compatible = "allwinner,sun50i-a64-de2-mixer-0";
++ reg = <0x100000 0x100000>;
++ clocks = <&display_clocks CLK_BUS_MIXER0>,
++ <&display_clocks CLK_MIXER0>;
++ clock-names = "bus",
++ "mod";
++ resets = <&display_clocks RST_MIXER0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ mixer0_out: port@1 {
++ reg = <1>;
++
++ mixer0_out_tcon0: endpoint {
++ remote-endpoint = <&tcon0_in_mixer0>;
++ };
++ };
++ };
++ };
++
++ mixer1: mixer@200000 {
++ compatible = "allwinner,sun50i-a64-de2-mixer-1";
++ reg = <0x200000 0x100000>;
++ clocks = <&display_clocks CLK_BUS_MIXER1>,
++ <&display_clocks CLK_MIXER1>;
++ clock-names = "bus",
++ "mod";
++ resets = <&display_clocks RST_MIXER1>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ mixer1_out: port@1 {
++ reg = <1>;
++
++ mixer1_out_tcon1: endpoint {
++ remote-endpoint = <&tcon1_in_mixer1>;
++ };
++ };
++ };
++ };
++ };
++
+ syscon: syscon@1c00000 {
+- compatible = "allwinner,sun50i-a64-system-controller",
+- "syscon";
++ compatible = "allwinner,sun50i-a64-system-control";
+ reg = <0x01c00000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ sram_c: sram@18000 {
++ compatible = "mmio-sram";
++ reg = <0x00018000 0x28000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0 0x00018000 0x28000>;
++
++ de2_sram: sram-section@0 {
++ compatible = "allwinner,sun50i-a64-sram-c";
++ reg = <0x0000 0x28000>;
++ };
++ };
+ };
+
+ dma: dma-controller@1c02000 {
+@@ -185,6 +290,75 @@
+ #dma-cells = <1>;
+ };
+
++ tcon0: lcd-controller@1c0c000 {
++ compatible = "allwinner,sun50i-a64-tcon-lcd",
++ "allwinner,sun8i-a83t-tcon-lcd";
++ reg = <0x01c0c000 0x1000>;
++ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
++ clock-names = "ahb", "tcon-ch0";
++ clock-output-names = "tcon-pixel-clock";
++ resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
++ reset-names = "lcd", "lvds";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon0_in: port@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++
++ tcon0_in_mixer0: endpoint@0 {
++ reg = <0>;
++ remote-endpoint = <&mixer0_out_tcon0>;
++ };
++ };
++
++ tcon0_out: port@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ };
++ };
++ };
++
++ tcon1: lcd-controller@1c0d000 {
++ compatible = "allwinner,sun50i-a64-tcon-tv",
++ "allwinner,sun8i-a83t-tcon-tv";
++ reg = <0x01c0d000 0x1000>;
++ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
++ clock-names = "ahb", "tcon-ch1";
++ resets = <&ccu RST_BUS_TCON1>;
++ reset-names = "lcd";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ tcon1_in: port@0 {
++ reg = <0>;
++
++ tcon1_in_mixer1: endpoint {
++ remote-endpoint = <&mixer1_out_tcon1>;
++ };
++ };
++
++ tcon1_out: port@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++
++ tcon1_out_hdmi: endpoint@1 {
++ reg = <1>;
++ remote-endpoint = <&hdmi_in_tcon1>;
++ };
++ };
++ };
++ };
++
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun50i-a64-mmc";
+ reg = <0x01c0f000 0x1000>;
+@@ -227,6 +401,11 @@
+ #size-cells = <0>;
+ };
+
++ sid: eeprom@1c14000 {
++ compatible = "allwinner,sun50i-a64-sid";
++ reg = <0x1c14000 0x400>;
++ };
++
+ usb_otg: usb@1c19000 {
+ compatible = "allwinner,sun8i-a33-musb";
+ reg = <0x01c19000 0x0400>;
+@@ -356,7 +535,7 @@
+ };
+
+ mmc2_pins: mmc2-pins {
+- pins = "PC1", "PC5", "PC6", "PC8", "PC9",
++ pins = "PC5", "PC6", "PC8", "PC9",
+ "PC10","PC11", "PC12", "PC13",
+ "PC14", "PC15", "PC16";
+ function = "mmc2";
+@@ -364,6 +543,18 @@
+ bias-pull-up;
+ };
+
++ mmc2_ds_pin: mmc2-ds-pin {
++ pins = "PC1";
++ function = "mmc2";
++ drive-strength = <30>;
++ bias-pull-up;
++ };
++
++ pwm_pin: pwm_pin {
++ pins = "PD22";
++ function = "pwm";
++ };
++
+ rmii_pins: rmii_pins {
+ pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+ "PD18", "PD19", "PD20", "PD22", "PD23";
+@@ -394,7 +585,7 @@
+ function = "spi1";
+ };
+
+- uart0_pins_a: uart0 {
++ uart0_pb_pins: uart0-pb-pins {
+ pins = "PB8", "PB9";
+ function = "uart0";
+ };
+@@ -474,15 +665,6 @@
+ status = "disabled";
+ };
+
+- pwm: pwm@1c21400 {
+- compatible = "allwinner,sun50i-a64-pwm",
+- "allwinner,sun5i-a13-pwm";
+- reg = <0x01c21400 0x8>;
+- clocks = <&osc24M>;
+- #pwm-cells = <3>;
+- status = "disabled";
+- };
+-
+ uart0: serial@1c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+@@ -617,8 +799,6 @@
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ status = "disabled";
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+@@ -638,11 +818,69 @@
+ #interrupt-cells = <3>;
+ };
+
++ pwm: pwm@1c21400 {
++ compatible = "allwinner,sun50i-a64-pwm",
++ "allwinner,sun5i-a13-pwm";
++ reg = <0x01c21400 0x400>;
++ clocks = <&osc24M>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm_pin>;
++ #pwm-cells = <3>;
++ status = "disabled";
++ };
++
++ hdmi: hdmi@1ee0000 {
++ compatible = "allwinner,sun50i-a64-dw-hdmi",
++ "allwinner,sun8i-a83t-dw-hdmi";
++ reg = <0x01ee0000 0x10000>;
++ reg-io-width = <1>;
++ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
++ <&ccu CLK_HDMI>;
++ clock-names = "iahb", "isfr", "tmds";
++ resets = <&ccu RST_BUS_HDMI1>;
++ reset-names = "ctrl";
++ phys = <&hdmi_phy>;
++ phy-names = "hdmi-phy";
++ status = "disabled";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hdmi_in: port@0 {
++ reg = <0>;
++
++ hdmi_in_tcon1: endpoint {
++ remote-endpoint = <&tcon1_out_hdmi>;
++ };
++ };
++
++ hdmi_out: port@1 {
++ reg = <1>;
++ };
++ };
++ };
++
++ hdmi_phy: hdmi-phy@1ef0000 {
++ compatible = "allwinner,sun50i-a64-hdmi-phy";
++ reg = <0x01ef0000 0x10000>;
++ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
++ <&ccu 7>;
++ clock-names = "bus", "mod", "pll-0";
++ resets = <&ccu RST_BUS_HDMI0>;
++ reset-names = "phy";
++ #phy-cells = <0>;
++ };
++
+ rtc: rtc@1f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
++ clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
++ clocks = <&osc32k>;
++ #clock-cells = <1>;
+ };
+
+ r_intc: interrupt-controller@1f00c00 {
+@@ -664,6 +902,29 @@
+ #reset-cells = <1>;
+ };
+
++ r_i2c: i2c@1f02400 {
++ compatible = "allwinner,sun50i-a64-i2c",
++ "allwinner,sun6i-a31-i2c";
++ reg = <0x01f02400 0x400>;
++ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&r_ccu CLK_APB0_I2C>;
++ resets = <&r_ccu RST_APB0_I2C>;
++ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ r_pwm: pwm@1f03800 {
++ compatible = "allwinner,sun50i-a64-pwm",
++ "allwinner,sun5i-a13-pwm";
++ reg = <0x01f03800 0x400>;
++ clocks = <&osc24M>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&r_pwm_pin>;
++ #pwm-cells = <3>;
++ status = "disabled";
++ };
++
+ r_pio: pinctrl@1f02c00 {
+ compatible = "allwinner,sun50i-a64-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+@@ -675,6 +936,16 @@
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
++ r_i2c_pl89_pins: r-i2c-pl89-pins {
++ pins = "PL8", "PL9";
++ function = "s_i2c";
++ };
++
++ r_pwm_pin: pwm {
++ pins = "PL10";
++ function = "s_pwm";
++ };
++
+ r_rsb_pins: rsb {
+ pins = "PL0", "PL1";
+ function = "s_rsb";
+--
+2.11.0
+
diff --git a/gnu/packages/patches/u-boot-pinebook-dts.patch b/gnu/packages/patches/u-boot-pinebook-dts.patch
new file mode 100644
index 0000000000..48c004fdfc
--- /dev/null
+++ b/gnu/packages/patches/u-boot-pinebook-dts.patch
@@ -0,0 +1,388 @@
+From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:31 -0800
+Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook
+
+Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
+USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
+bridge from Analogix.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++
+ arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++++++++++++
+ configs/pinebook_defconfig | 22 ++
+ 4 files changed, 332 insertions(+)
+ create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+ create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
+ create mode 100644 configs/pinebook_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 3093c1185e..eae6b9ee5d 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
+ sun50i-a64-orangepi-win.dtb \
+ sun50i-a64-pine64-plus.dtb \
+ sun50i-a64-pine64.dtb \
++ sun50i-a64-pinebook.dtb \
+ sun50i-a64-sopine-baseboard.dtb
+ dtb-$(CONFIG_MACH_SUN9I) += \
+ sun9i-a80-optimus.dtb \
+diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+new file mode 100644
+index 0000000000..a99b7171d0
+--- /dev/null
++++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+@@ -0,0 +1,15 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
++ *
++ */
++
++/* The ANX6345 eDP-bridge is on r_i2c */
++&r_i2c {
++ anx6345: edp-bridge@38 {
++ compatible = "analogix,anx6345";
++ reg = <0x38>;
++ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
++ status = "okay";
++ };
++};
+diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
+new file mode 100644
+index 0000000000..ec537c5297
+--- /dev/null
++++ b/arch/arm/dts/sun50i-a64-pinebook.dts
+@@ -0,0 +1,294 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
++ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
++ *
++ */
++
++/dts-v1/;
++
++#include "sun50i-a64.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/pwm/pwm.h>
++
++/ {
++ model = "Pinebook";
++ compatible = "pine64,pinebook", "allwinner,sun50i-a64";
++
++ aliases {
++ serial0 = &uart0;
++ ethernet0 = &rtl8723cs;
++ };
++
++ vdd_bl: regulator@0 {
++ compatible = "regulator-fixed";
++ regulator-name = "bl-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
++ enable-active-high;
++ };
++
++ backlight: backlight {
++ compatible = "pwm-backlight";
++ pwms = <&pwm 0 50000 0>;
++ brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
++ default-brightness-level = <2>;
++ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
++ power-supply = <&vdd_bl>;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++
++ framebuffer-lcd {
++ panel-supply = <&reg_dc1sw>;
++ dvdd25-supply = <&reg_dldo2>;
++ dvdd12-supply = <&reg_fldo1>;
++ };
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++
++ lid_switch {
++ label = "Lid Switch";
++ gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
++ linux,input-type = <EV_SW>;
++ linux,code = <SW_LID>;
++ linux,can-disable;
++ wakeup-source;
++ };
++ };
++
++ reg_vcc3v3: vcc3v3 {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ wifi_pwrseq: wifi_pwrseq {
++ compatible = "mmc-pwrseq-simple";
++ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
++ };
++};
++
++&ehci0 {
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&mmc0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins>;
++ vmmc-supply = <&reg_dcdc1>;
++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
++ disable-wp;
++ bus-width = <4>;
++ status = "okay";
++};
++
++&mmc1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc1_pins>;
++ vmmc-supply = <&reg_dldo4>;
++ vqmmc-supply = <&reg_eldo1>;
++ mmc-pwrseq = <&wifi_pwrseq>;
++ bus-width = <4>;
++ non-removable;
++ status = "okay";
++
++ rtl8723cs: wifi@1 {
++ reg = <1>;
++ };
++};
++
++&mmc2 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
++ vmmc-supply = <&reg_dcdc1>;
++ vqmmc-supply = <&reg_eldo1>;
++ bus-width = <8>;
++ non-removable;
++ cap-mmc-hw-reset;
++ mmc-hs200-1_8v;
++ status = "okay";
++};
++
++&ohci0 {
++ phys = <&usbphy 0>;
++ phy-names = "usb";
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&pwm {
++ status = "okay";
++};
++
++&r_rsb {
++ status = "okay";
++
++ axp803: pmic@3a3 {
++ compatible = "x-powers,axp803";
++ reg = <0x3a3>;
++ interrupt-parent = <&r_intc>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++/* The ANX6345 eDP-bridge is on r_i2c */
++&r_i2c {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&r_i2c_pl89_pins>;
++ status = "okay";
++};
++
++#include "axp803.dtsi"
++
++&reg_aldo1 {
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-name = "vcc-csi";
++};
++
++&reg_aldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pl";
++};
++
++&reg_aldo3 {
++ regulator-always-on;
++ regulator-min-microvolt = <2700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-pll-avcc";
++};
++
++&reg_dc1sw {
++ regulator-name = "vcc-lcd";
++};
++
++&reg_dcdc1 {
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-3v3";
++};
++
++&reg_dcdc2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1300000>;
++ regulator-name = "vdd-cpux";
++};
++
++/* DCDC3 is polyphased with DCDC2 */
++
++&reg_dcdc5 {
++ regulator-always-on;
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "vcc-dram";
++};
++
++&reg_dcdc6 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-sys";
++};
++
++&reg_dldo1 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-hdmi";
++};
++
++&reg_dldo2 {
++ regulator-min-microvolt = <2500000>;
++ regulator-max-microvolt = <2500000>;
++ regulator-name = "vcc-edp";
++};
++
++&reg_dldo3 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "avdd-csi";
++};
++
++&reg_dldo4 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-wifi";
++};
++
++&reg_eldo1 {
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "cpvdd";
++};
++
++&reg_eldo3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vdd-1v8-csi";
++};
++
++&reg_fldo1 {
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "vcc-1v2-hsic";
++};
++
++&reg_fldo2 {
++ regulator-always-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ regulator-name = "vdd-cpus";
++};
++
++&reg_ldo_io0 {
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc-usb";
++ status = "okay";
++};
++
++&reg_rtc_ldo {
++ regulator-name = "vcc-rtc";
++};
++
++&simplefb_hdmi {
++ vcc-hdmi-supply = <&reg_dldo1>;
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pb_pins>;
++ status = "okay";
++};
++
++&usb_otg {
++ dr_mode = "host";
++};
++
++&usbphy {
++ usb0_vbus-supply = <&reg_ldo_io0>;
++ usb1_vbus-supply = <&reg_ldo_io0>;
++ status = "okay";
++};
+diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
+new file mode 100644
+index 0000000000..5294dbd2eb
+--- /dev/null
++++ b/configs/pinebook_defconfig
+@@ -0,0 +1,22 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN50I=y
++CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
++CONFIG_DRAM_CLK=552
++CONFIG_DRAM_ZQ=3881949
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++CONFIG_R_I2C_ENABLE=y
++# CONFIG_CMD_FLASH is not set
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_PWM=y
++CONFIG_PWM_SUNXI=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
++# CONFIG_USB_GADGET is not set
++CONFIG_VIDEO_BRIDGE=y
++CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
+--
+2.11.0
+
diff --git a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch b/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
new file mode 100644
index 0000000000..118bdf8e0c
--- /dev/null
+++ b/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
@@ -0,0 +1,98 @@
+From 20940ef2a397446a209350900d3bd618c3fd5b94 Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:28 -0800
+Subject: [PATCH 07/13] mmc: sunxi: add support for automatic delay calibration
+
+A64 and H6 support automatic delay calibration and Linux driver uses it
+instead of hardcoded delays. Add support for it to u-boot driver.
+
+Fixes eMMC instability on Pinebook
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Andre Przywara <andre.przywara@arm.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/include/asm/arch-sunxi/mmc.h | 6 +++++-
+ drivers/mmc/sunxi_mmc.c | 21 ++++++++++++++++++++-
+ 2 files changed, 25 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
+index d98c53faaa..f2deafddd2 100644
+--- a/arch/arm/include/asm/arch-sunxi/mmc.h
++++ b/arch/arm/include/asm/arch-sunxi/mmc.h
+@@ -46,7 +46,9 @@ struct sunxi_mmc {
+ u32 cbda; /* 0x94 */
+ u32 res2[26];
+ #if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
+- u32 res3[64];
++ u32 res3[17];
++ u32 samp_dl;
++ u32 res4[46];
+ #endif
+ u32 fifo; /* 0x100 / 0x200 FIFO access address */
+ };
+@@ -130,5 +132,7 @@ struct sunxi_mmc {
+ #define SUNXI_MMC_COMMON_CLK_GATE (1 << 16)
+ #define SUNXI_MMC_COMMON_RESET (1 << 18)
+
++#define SUNXI_MMC_CAL_DL_SW_EN (0x1 << 7)
++
+ struct mmc *sunxi_mmc_init(int sdc_no);
+ #endif /* _SUNXI_MMC_H */
+diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
+index 39f15eb423..147eb9b4d5 100644
+--- a/drivers/mmc/sunxi_mmc.c
++++ b/drivers/mmc/sunxi_mmc.c
+@@ -99,11 +99,16 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
+ {
+ unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
+ bool new_mode = false;
++ bool calibrate = false;
+ u32 val = 0;
+
+ if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
+ new_mode = true;
+
++#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
++ calibrate = true;
++#endif
++
+ /*
+ * The MMC clock has an extra /2 post-divider when operating in the new
+ * mode.
+@@ -174,7 +179,11 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
+ val = CCM_MMC_CTRL_MODE_SEL_NEW;
+ setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
+ #endif
+- } else {
++ } else if (!calibrate) {
++ /*
++ * Use hardcoded delay values if controller doesn't support
++ * calibration
++ */
+ val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
+ CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
+ }
+@@ -228,6 +237,16 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
+ rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
+ writel(rval, &priv->reg->clkcr);
+
++#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
++ /* A64 supports calibration of delays on MMC controller and we
++ * have to set delay of zero before starting calibration.
++ * Allwinner BSP driver sets a delay only in the case of
++ * using HS400 which is not supported by mainline U-Boot or
++ * Linux at the moment
++ */
++ writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl);
++#endif
++
+ /* Re-enable Clock */
+ rval |= SUNXI_MMC_CLK_ENABLE;
+ writel(rval, &priv->reg->clkcr);
+--
+2.11.0
+
diff --git a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch b/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
new file mode 100644
index 0000000000..824a16b9db
--- /dev/null
+++ b/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
@@ -0,0 +1,70 @@
+From 31a4ac4d79d75baeede3edfa95515fd4169ef502 Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:30 -0800
+Subject: [PATCH 09/13] sun50i: A64: add support for R_I2C controller
+
+Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has
+two groups of pinmuxes on PL bank, so it's called R_I2C.
+
+Add support for this I2C controller and the pinmux which doesn't conflict
+with RSB.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+Acked-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
+ arch/arm/mach-sunxi/Kconfig | 1 +
+ board/sunxi/board.c | 6 ++++++
+ 3 files changed, 8 insertions(+)
+
+diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
+index 6a5eafc3d3..2daf23f6f5 100644
+--- a/arch/arm/include/asm/arch-sunxi/gpio.h
++++ b/arch/arm/include/asm/arch-sunxi/gpio.h
+@@ -211,6 +211,7 @@ enum sunxi_gpio_number {
+ #define SUN8I_H3_GPL_R_TWI 2
+ #define SUN8I_A23_GPL_R_TWI 3
+ #define SUN8I_GPL_R_UART 2
++#define SUN50I_GPL_R_TWI 2
+
+ #define SUN9I_GPN_R_RSB 3
+
+diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
+index 6277abc3cc..560dc9b25d 100644
+--- a/arch/arm/mach-sunxi/Kconfig
++++ b/arch/arm/mach-sunxi/Kconfig
+@@ -278,6 +278,7 @@ config MACH_SUN50I
+ select ARM64
+ select DM_I2C
+ select PHY_SUN4I_USB
++ select SUN6I_PRCM
+ select SUNXI_DE2
+ select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
+diff --git a/board/sunxi/board.c b/board/sunxi/board.c
+index b196d48674..64ccbc7245 100644
+--- a/board/sunxi/board.c
++++ b/board/sunxi/board.c
+@@ -168,10 +168,16 @@ void i2c_init_board(void)
+ #endif
+
+ #ifdef CONFIG_R_I2C_ENABLE
++#ifdef CONFIG_MACH_SUN50I
++ clock_twi_onoff(5, 1);
++ sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI);
++ sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI);
++#else
+ clock_twi_onoff(5, 1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
+ #endif
++#endif
+ }
+
+ #if defined(CONFIG_ENV_IS_IN_MMC) && defined(CONFIG_ENV_IS_IN_FAT)
+--
+2.11.0
+
diff --git a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch b/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
new file mode 100644
index 0000000000..9289645bec
--- /dev/null
+++ b/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
@@ -0,0 +1,38 @@
+From ababb5920e8992c9bb7956df3cc85dc68d27dfe8 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 29 Oct 2018 00:56:48 +0000
+Subject: [PATCH 04/13] sunxi: A64: Re-add syscon to DT node
+
+The sun50i-a64.dtsi changes introduced in Linux v4.19-rc1 changed the
+compatible name for the syscon controller, dropping the generic "syscon"
+fallback. Using this new DT node will make the Ethernet driver in every
+older kernel (or non-Linux kernels) fail to initialise the MAC device.
+
+To allow booting distribution kernels (from installer images via UEFI,
+for instance), re-add the syscon compatible string as a fallback. This
+works with both older and newer kernels.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Jagan Teki <jagan@openedev.com>
+---
+ arch/arm/dts/sun50i-a64.dtsi | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
+index f3a66f8882..ff41abc96a 100644
+--- a/arch/arm/dts/sun50i-a64.dtsi
++++ b/arch/arm/dts/sun50i-a64.dtsi
+@@ -259,7 +259,8 @@
+ };
+
+ syscon: syscon@1c00000 {
+- compatible = "allwinner,sun50i-a64-system-control";
++ compatible = "allwinner,sun50i-a64-system-control",
++ "syscon";
+ reg = <0x01c00000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+--
+2.11.0
+
diff --git a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch b/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
new file mode 100644
index 0000000000..8c6ca8a992
--- /dev/null
+++ b/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
@@ -0,0 +1,50 @@
+From 8336a43792a103c13d939b3925cb75322911f7fb Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Mon, 5 Nov 2018 20:24:29 -0800
+Subject: [PATCH 08/13] dm: video: bridge: don't fail to activate bridge if
+ reset or sleep GPIO is missing
+
+Both GPIOs are optional, so we shouldn't fail if any is missing.
+Without this fix reset is not deasserted if sleep GPIO is missing.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
+Reviewed-by: Andre Przywara <andre.przywara@arm.com>
+Cc: Vagrant Cascadian <vagrant@debian.org>
+---
+ drivers/video/bridge/video-bridge-uclass.c | 16 +++++++++++-----
+ 1 file changed, 11 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/video/bridge/video-bridge-uclass.c b/drivers/video/bridge/video-bridge-uclass.c
+index cd4959cc71..5fecb4cfd5 100644
+--- a/drivers/video/bridge/video-bridge-uclass.c
++++ b/drivers/video/bridge/video-bridge-uclass.c
+@@ -106,13 +106,19 @@ static int video_bridge_pre_probe(struct udevice *dev)
+ int video_bridge_set_active(struct udevice *dev, bool active)
+ {
+ struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev);
+- int ret;
++ int ret = 0;
+
+ debug("%s: %d\n", __func__, active);
+- ret = dm_gpio_set_value(&uc_priv->sleep, !active);
+- if (ret)
+- return ret;
+- if (active) {
++ if (uc_priv->sleep.dev) {
++ ret = dm_gpio_set_value(&uc_priv->sleep, !active);
++ if (ret)
++ return ret;
++ }
++
++ if (!active)
++ return 0;
++
++ if (uc_priv->reset.dev) {
+ ret = dm_gpio_set_value(&uc_priv->reset, true);
+ if (ret)
+ return ret;
+--
+2.11.0
+
diff --git a/gnu/system/install.scm b/gnu/system/install.scm
index a648ddf95e..45b3a0c839 100644
--- a/gnu/system/install.scm
+++ b/gnu/system/install.scm
@@ -53,6 +53,7 @@
nintendo-nes-classic-edition-installation-os
novena-installation-os
pine64-plus-installation-os
+ pinebook-installation-os
rk3399-puma-installation-os
wandboard-installation-os
os-with-u-boot))
@@ -473,6 +474,11 @@ The bootloader BOOTLOADER is installed to BOOTLOADER-TARGET."
"/dev/mmcblk0" ; SD card storage
"ttyS0"))
+(define pinebook-installation-os
+ (embedded-installation-os u-boot-pinebook-bootloader
+ "/dev/mmcblk0" ; SD card storage
+ "ttyS0"))
+
(define rk3399-puma-installation-os
(embedded-installation-os u-boot-puma-rk3399-bootloader
"/dev/mmcblk0" ; SD card storage
generated by cgit v1.2.3 (git 2.25.4) at 2024-11-06 16:31:25 +0000