From 3f55b7be16c52a298b8b8d79f199119944784ca3 Mon Sep 17 00:00:00 2001 From: Tobias Geerinckx-Rice Date: Mon, 23 Sep 2019 22:15:54 +0200 Subject: gnu: glm: Update to 0.9.9.6. * gnu/packages/maths.scm (glm): Update to 0.9.9.6. [source]: Add patch. * gnu/packages/patches/glm-restore-install-target.patch: New file. * gnu/local.mk (dist_patch_DATA): Add it. --- .../patches/glm-restore-install-target.patch | 574 +++++++++++++++++++++ 1 file changed, 574 insertions(+) create mode 100644 gnu/packages/patches/glm-restore-install-target.patch (limited to 'gnu/packages/patches') diff --git a/gnu/packages/patches/glm-restore-install-target.patch b/gnu/packages/patches/glm-restore-install-target.patch new file mode 100644 index 0000000000..a628030f6f --- /dev/null +++ b/gnu/packages/patches/glm-restore-install-target.patch @@ -0,0 +1,574 @@ +From: Tobias Geerinckx-Rice +Date: Mon, 23 Sep 2019 22:01:17 +0200 +Subject: [PATCH] gnu: glm: Restore ‘install’ target. + +It was removed in 0.9.9.6, making installation a tedious manual process +for no clear reason[0]. Restore it for now. + +[0]: https://github.com/g-truc/glm/issues/947 + +diff -Naur glm/cmake/CMakePackageConfigHelpers.cmake glmn/cmake/CMakePackageConfigHelpers.cmake +--- glm/cmake/CMakePackageConfigHelpers.cmake 1970-01-01 01:00:00.000000000 +0100 ++++ glmn/cmake/CMakePackageConfigHelpers.cmake 2019-09-23 00:11:21.418152249 +0200 +@@ -0,0 +1,227 @@ ++# - CONFIGURE_PACKAGE_CONFIG_FILE(), WRITE_BASIC_PACKAGE_VERSION_FILE() ++# ++# CONFIGURE_PACKAGE_CONFIG_FILE( INSTALL_DESTINATION ++# [PATH_VARS ... ] ++# [NO_SET_AND_CHECK_MACRO] ++# [NO_CHECK_REQUIRED_COMPONENTS_MACRO]) ++# ++# CONFIGURE_PACKAGE_CONFIG_FILE() should be used instead of the plain ++# CONFIGURE_FILE() command when creating the Config.cmake or -config.cmake ++# file for installing a project or library. It helps making the resulting package ++# relocatable by avoiding hardcoded paths in the installed Config.cmake file. ++# ++# In a FooConfig.cmake file there may be code like this to make the ++# install destinations know to the using project: ++# set(FOO_INCLUDE_DIR "@CMAKE_INSTALL_FULL_INCLUDEDIR@" ) ++# set(FOO_DATA_DIR "@CMAKE_INSTALL_PREFIX@/@RELATIVE_DATA_INSTALL_DIR@" ) ++# set(FOO_ICONS_DIR "@CMAKE_INSTALL_PREFIX@/share/icons" ) ++# ...logic to determine installedPrefix from the own location... ++# set(FOO_CONFIG_DIR "${installedPrefix}/@CONFIG_INSTALL_DIR@" ) ++# All 4 options shown above are not sufficient, since the first 3 hardcode ++# the absolute directory locations, and the 4th case works only if the logic ++# to determine the installedPrefix is correct, and if CONFIG_INSTALL_DIR contains ++# a relative path, which in general cannot be guaranteed. ++# This has the effect that the resulting FooConfig.cmake file would work poorly ++# under Windows and OSX, where users are used to choose the install location ++# of a binary package at install time, independent from how CMAKE_INSTALL_PREFIX ++# was set at build/cmake time. ++# ++# Using CONFIGURE_PACKAGE_CONFIG_FILE() helps. If used correctly, it makes the ++# resulting FooConfig.cmake file relocatable. ++# Usage: ++# 1. write a FooConfig.cmake.in file as you are used to ++# 2. insert a line containing only the string "@PACKAGE_INIT@" ++# 3. instead of SET(FOO_DIR "@SOME_INSTALL_DIR@"), use SET(FOO_DIR "@PACKAGE_SOME_INSTALL_DIR@") ++# (this must be after the @PACKAGE_INIT@ line) ++# 4. instead of using the normal CONFIGURE_FILE(), use CONFIGURE_PACKAGE_CONFIG_FILE() ++# ++# The and arguments are the input and output file, the same way ++# as in CONFIGURE_FILE(). ++# ++# The given to INSTALL_DESTINATION must be the destination where the FooConfig.cmake ++# file will be installed to. This can either be a relative or absolute path, both work. ++# ++# The variables to given as PATH_VARS are the variables which contain ++# install destinations. For each of them the macro will create a helper variable ++# PACKAGE_. These helper variables must be used ++# in the FooConfig.cmake.in file for setting the installed location. They are calculated ++# by CONFIGURE_PACKAGE_CONFIG_FILE() so that they are always relative to the ++# installed location of the package. This works both for relative and also for absolute locations. ++# For absolute locations it works only if the absolute location is a subdirectory ++# of CMAKE_INSTALL_PREFIX. ++# ++# By default configure_package_config_file() also generates two helper macros, ++# set_and_check() and check_required_components() into the FooConfig.cmake file. ++# ++# set_and_check() should be used instead of the normal set() ++# command for setting directories and file locations. Additionally to setting the ++# variable it also checks that the referenced file or directory actually exists ++# and fails with a FATAL_ERROR otherwise. This makes sure that the created ++# FooConfig.cmake file does not contain wrong references. ++# When using the NO_SET_AND_CHECK_MACRO, this macro is not generated into the ++# FooConfig.cmake file. ++# ++# check_required_components() should be called at the end of the ++# FooConfig.cmake file if the package supports components. ++# This macro checks whether all requested, non-optional components have been found, ++# and if this is not the case, sets the Foo_FOUND variable to FALSE, so that the package ++# is considered to be not found. ++# It does that by testing the Foo__FOUND variables for all requested ++# required components. ++# When using the NO_CHECK_REQUIRED_COMPONENTS option, this macro is not generated ++# into the FooConfig.cmake file. ++# ++# For an example see below the documentation for WRITE_BASIC_PACKAGE_VERSION_FILE(). ++# ++# ++# WRITE_BASIC_PACKAGE_VERSION_FILE( filename VERSION major.minor.patch COMPATIBILITY (AnyNewerVersion|SameMajorVersion|ExactVersion) ) ++# ++# Writes a file for use as ConfigVersion.cmake file to . ++# See the documentation of FIND_PACKAGE() for details on this. ++# filename is the output filename, it should be in the build tree. ++# major.minor.patch is the version number of the project to be installed ++# The COMPATIBILITY mode AnyNewerVersion means that the installed package version ++# will be considered compatible if it is newer or exactly the same as the requested version. ++# This mode should be used for packages which are fully backward compatible, ++# also across major versions. ++# If SameMajorVersion is used instead, then the behaviour differs from AnyNewerVersion ++# in that the major version number must be the same as requested, e.g. version 2.0 will ++# not be considered compatible if 1.0 is requested. ++# This mode should be used for packages which guarantee backward compatibility within the ++# same major version. ++# If ExactVersion is used, then the package is only considered compatible if the requested ++# version matches exactly its own version number (not considering the tweak version). ++# For example, version 1.2.3 of a package is only considered compatible to requested version 1.2.3. ++# This mode is for packages without compatibility guarantees. ++# If your project has more elaborated version matching rules, you will need to write your ++# own custom ConfigVersion.cmake file instead of using this macro. ++# ++# Internally, this macro executes configure_file() to create the resulting ++# version file. Depending on the COMPATIBILITY, either the file ++# BasicConfigVersion-SameMajorVersion.cmake.in or BasicConfigVersion-AnyNewerVersion.cmake.in ++# is used. Please note that these two files are internal to CMake and you should ++# not call configure_file() on them yourself, but they can be used as starting ++# point to create more sophisticted custom ConfigVersion.cmake files. ++# ++# ++# Example using both configure_package_config_file() and write_basic_package_version_file(): ++# CMakeLists.txt: ++# set(INCLUDE_INSTALL_DIR include/ ... CACHE ) ++# set(LIB_INSTALL_DIR lib/ ... CACHE ) ++# set(SYSCONFIG_INSTALL_DIR etc/foo/ ... CACHE ) ++# ... ++# include(CMakePackageConfigHelpers) ++# configure_package_config_file(FooConfig.cmake.in ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake ++# INSTALL_DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake ++# PATH_VARS INCLUDE_INSTALL_DIR SYSCONFIG_INSTALL_DIR) ++# write_basic_package_version_file(${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake ++# VERSION 1.2.3 ++# COMPATIBILITY SameMajorVersion ) ++# install(FILES ${CMAKE_CURRENT_BINARY_DIR}/FooConfig.cmake ${CMAKE_CURRENT_BINARY_DIR}/FooConfigVersion.cmake ++# DESTINATION ${LIB_INSTALL_DIR}/Foo/cmake ) ++# ++# With a FooConfig.cmake.in: ++# set(FOO_VERSION x.y.z) ++# ... ++# @PACKAGE_INIT@ ++# ... ++# set_and_check(FOO_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@") ++# set_and_check(FOO_SYSCONFIG_DIR "@PACKAGE_SYSCONFIG_INSTALL_DIR@") ++# ++# check_required_components(Foo) ++ ++ ++#============================================================================= ++# Copyright 2012 Alexander Neundorf ++# ++# Distributed under the OSI-approved BSD License (the "License"); ++# see accompanying file Copyright.txt for details. ++# ++# This software is distributed WITHOUT ANY WARRANTY; without even the ++# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ++# See the License for more information. ++#============================================================================= ++# (To distribute this file outside of CMake, substitute the full ++# License text for the above reference.) ++ ++include(CMakeParseArguments) ++ ++include(WriteBasicConfigVersionFile) ++ ++macro(WRITE_BASIC_PACKAGE_VERSION_FILE) ++ write_basic_config_version_file(${ARGN}) ++endmacro() ++ ++ ++function(CONFIGURE_PACKAGE_CONFIG_FILE _inputFile _outputFile) ++ set(options NO_SET_AND_CHECK_MACRO NO_CHECK_REQUIRED_COMPONENTS_MACRO) ++ set(oneValueArgs INSTALL_DESTINATION ) ++ set(multiValueArgs PATH_VARS ) ++ ++ cmake_parse_arguments(CCF "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN}) ++ ++ if(CCF_UNPARSED_ARGUMENTS) ++ message(FATAL_ERROR "Unknown keywords given to CONFIGURE_PACKAGE_CONFIG_FILE(): \"${CCF_UNPARSED_ARGUMENTS}\"") ++ endif() ++ ++ if(NOT CCF_INSTALL_DESTINATION) ++ message(FATAL_ERROR "No INSTALL_DESTINATION given to CONFIGURE_PACKAGE_CONFIG_FILE()") ++ endif() ++ ++ if(IS_ABSOLUTE "${CCF_INSTALL_DESTINATION}") ++ set(absInstallDir "${CCF_INSTALL_DESTINATION}") ++ else() ++ set(absInstallDir "${CMAKE_INSTALL_PREFIX}/${CCF_INSTALL_DESTINATION}") ++ endif() ++ file(RELATIVE_PATH PACKAGE_RELATIVE_PATH "${absInstallDir}" "${CMAKE_INSTALL_PREFIX}" ) ++ ++ foreach(var ${CCF_PATH_VARS}) ++ if(NOT DEFINED ${var}) ++ message(FATAL_ERROR "Variable ${var} does not exist") ++ else() ++ if(IS_ABSOLUTE "${${var}}") ++ string(REPLACE "${CMAKE_INSTALL_PREFIX}" "\${PACKAGE_PREFIX_DIR}" ++ PACKAGE_${var} "${${var}}") ++ else() ++ set(PACKAGE_${var} "\${PACKAGE_PREFIX_DIR}/${${var}}") ++ endif() ++ endif() ++ endforeach() ++ ++ set(PACKAGE_INIT " ++####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() ####### ++get_filename_component(PACKAGE_PREFIX_DIR \"\${CMAKE_CURRENT_LIST_DIR}/${PACKAGE_RELATIVE_PATH}\" ABSOLUTE) ++") ++ ++ if(NOT CCF_NO_SET_AND_CHECK_MACRO) ++ set(PACKAGE_INIT "${PACKAGE_INIT} ++macro(set_and_check _var _file) ++ set(\${_var} \"\${_file}\") ++ if(NOT EXISTS \"\${_file}\") ++ message(FATAL_ERROR \"File or directory \${_file} referenced by variable \${_var} does not exist !\") ++ endif() ++endmacro() ++") ++ endif() ++ ++ ++ if(NOT CCF_NO_CHECK_REQUIRED_COMPONENTS_MACRO) ++ set(PACKAGE_INIT "${PACKAGE_INIT} ++macro(check_required_components _NAME) ++ foreach(comp \${\${_NAME}_FIND_COMPONENTS}) ++ if(NOT \${_NAME}_\${comp}_FOUND) ++ if(\${_NAME}_FIND_REQUIRED_\${comp}) ++ set(\${_NAME}_FOUND FALSE) ++ endif() ++ endif() ++ endforeach(comp) ++endmacro() ++") ++ endif() ++ ++ set(PACKAGE_INIT "${PACKAGE_INIT} ++####################################################################################") ++ ++ configure_file("${_inputFile}" "${_outputFile}" @ONLY) ++ ++endfunction() +diff -Naur glm/cmake/glmBuildConfig.cmake.in glmn/cmake/glmBuildConfig.cmake.in +--- glm/cmake/glmBuildConfig.cmake.in 1970-01-01 01:00:00.000000000 +0100 ++++ glmn/cmake/glmBuildConfig.cmake.in 2019-09-23 00:12:08.090955650 +0200 +@@ -0,0 +1,6 @@ ++set(GLM_VERSION "@GLM_VERSION@") ++set(GLM_INCLUDE_DIRS "@CMAKE_CURRENT_SOURCE_DIR@") ++ ++if (NOT CMAKE_VERSION VERSION_LESS "3.0") ++ include("${CMAKE_CURRENT_LIST_DIR}/glmTargets.cmake") ++endif() +diff -Naur glm/cmake/glmConfig.cmake.in glmn/cmake/glmConfig.cmake.in +--- glm/cmake/glmConfig.cmake.in 1970-01-01 01:00:00.000000000 +0100 ++++ glmn/cmake/glmConfig.cmake.in 2019-09-23 00:12:14.566373412 +0200 +@@ -0,0 +1,9 @@ ++set(GLM_VERSION "@GLM_VERSION@") ++ ++@PACKAGE_INIT@ ++ ++set_and_check(GLM_INCLUDE_DIRS "@PACKAGE_CMAKE_INSTALL_INCLUDEDIR@") ++ ++if (NOT CMAKE_VERSION VERSION_LESS "3.0") ++ include("${CMAKE_CURRENT_LIST_DIR}/glmTargets.cmake") ++endif() +diff -Naur glm/cmake/glm.pc.in glmn/cmake/glm.pc.in +--- glm/cmake/glm.pc.in 1970-01-01 01:00:00.000000000 +0100 ++++ glmn/cmake/glm.pc.in 2019-09-23 00:11:59.695710511 +0200 +@@ -0,0 +1,7 @@ ++prefix=@CMAKE_INSTALL_PREFIX@ ++includedir=${prefix}/include ++ ++Name: GLM ++Description: OpenGL Mathematics ++Version: @GLM_VERSION@ ++Cflags: -I${includedir} +diff -Naur glm/cmake/GNUInstallDirs.cmake glmn/cmake/GNUInstallDirs.cmake +--- glm/cmake/GNUInstallDirs.cmake 1970-01-01 01:00:00.000000000 +0100 ++++ glmn/cmake/GNUInstallDirs.cmake 2019-09-23 00:11:47.363819337 +0200 +@@ -0,0 +1,188 @@ ++# - Define GNU standard installation directories ++# Provides install directory variables as defined for GNU software: ++# http://www.gnu.org/prep/standards/html_node/Directory-Variables.html ++# Inclusion of this module defines the following variables: ++# CMAKE_INSTALL_ - destination for files of a given type ++# CMAKE_INSTALL_FULL_ - corresponding absolute path ++# where is one of: ++# BINDIR - user executables (bin) ++# SBINDIR - system admin executables (sbin) ++# LIBEXECDIR - program executables (libexec) ++# SYSCONFDIR - read-only single-machine data (etc) ++# SHAREDSTATEDIR - modifiable architecture-independent data (com) ++# LOCALSTATEDIR - modifiable single-machine data (var) ++# LIBDIR - object code libraries (lib or lib64 or lib/ on Debian) ++# INCLUDEDIR - C header files (include) ++# OLDINCLUDEDIR - C header files for non-gcc (/usr/include) ++# DATAROOTDIR - read-only architecture-independent data root (share) ++# DATADIR - read-only architecture-independent data (DATAROOTDIR) ++# INFODIR - info documentation (DATAROOTDIR/info) ++# LOCALEDIR - locale-dependent data (DATAROOTDIR/locale) ++# MANDIR - man documentation (DATAROOTDIR/man) ++# DOCDIR - documentation root (DATAROOTDIR/doc/PROJECT_NAME) ++# Each CMAKE_INSTALL_ value may be passed to the DESTINATION options of ++# install() commands for the corresponding file type. If the includer does ++# not define a value the above-shown default will be used and the value will ++# appear in the cache for editing by the user. ++# Each CMAKE_INSTALL_FULL_ value contains an absolute path constructed ++# from the corresponding destination by prepending (if necessary) the value ++# of CMAKE_INSTALL_PREFIX. ++ ++#============================================================================= ++# Copyright 2011 Nikita Krupen'ko ++# Copyright 2011 Kitware, Inc. ++# ++# Distributed under the OSI-approved BSD License (the "License"); ++# see accompanying file Copyright.txt for details. ++# ++# This software is distributed WITHOUT ANY WARRANTY; without even the ++# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ++# See the License for more information. ++#============================================================================= ++# (To distribute this file outside of CMake, substitute the full ++# License text for the above reference.) ++ ++# Installation directories ++# ++if(NOT DEFINED CMAKE_INSTALL_BINDIR) ++ set(CMAKE_INSTALL_BINDIR "bin" CACHE PATH "user executables (bin)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_SBINDIR) ++ set(CMAKE_INSTALL_SBINDIR "sbin" CACHE PATH "system admin executables (sbin)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_LIBEXECDIR) ++ set(CMAKE_INSTALL_LIBEXECDIR "libexec" CACHE PATH "program executables (libexec)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_SYSCONFDIR) ++ set(CMAKE_INSTALL_SYSCONFDIR "etc" CACHE PATH "read-only single-machine data (etc)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_SHAREDSTATEDIR) ++ set(CMAKE_INSTALL_SHAREDSTATEDIR "com" CACHE PATH "modifiable architecture-independent data (com)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_LOCALSTATEDIR) ++ set(CMAKE_INSTALL_LOCALSTATEDIR "var" CACHE PATH "modifiable single-machine data (var)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_LIBDIR) ++ set(_LIBDIR_DEFAULT "lib") ++ # Override this default 'lib' with 'lib64' iff: ++ # - we are on Linux system but NOT cross-compiling ++ # - we are NOT on debian ++ # - we are on a 64 bits system ++ # reason is: amd64 ABI: http://www.x86-64.org/documentation/abi.pdf ++ # For Debian with multiarch, use 'lib/${CMAKE_LIBRARY_ARCHITECTURE}' if ++ # CMAKE_LIBRARY_ARCHITECTURE is set (which contains e.g. "i386-linux-gnu" ++ # See http://wiki.debian.org/Multiarch ++ if((CMAKE_SYSTEM_NAME MATCHES "Linux|kFreeBSD" OR CMAKE_SYSTEM_NAME STREQUAL "GNU") ++ AND NOT CMAKE_CROSSCOMPILING) ++ if (EXISTS "/etc/debian_version") # is this a debian system ? ++ if(CMAKE_LIBRARY_ARCHITECTURE) ++ set(_LIBDIR_DEFAULT "lib/${CMAKE_LIBRARY_ARCHITECTURE}") ++ endif() ++ else() # not debian, rely on CMAKE_SIZEOF_VOID_P: ++ if(NOT DEFINED CMAKE_SIZEOF_VOID_P) ++ message(AUTHOR_WARNING ++ "Unable to determine default CMAKE_INSTALL_LIBDIR directory because no target architecture is known. " ++ "Please enable at least one language before including GNUInstallDirs.") ++ else() ++ if("${CMAKE_SIZEOF_VOID_P}" EQUAL "8") ++ set(_LIBDIR_DEFAULT "lib64") ++ endif() ++ endif() ++ endif() ++ endif() ++ set(CMAKE_INSTALL_LIBDIR "${_LIBDIR_DEFAULT}" CACHE PATH "object code libraries (${_LIBDIR_DEFAULT})") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_INCLUDEDIR) ++ set(CMAKE_INSTALL_INCLUDEDIR "include" CACHE PATH "C header files (include)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_OLDINCLUDEDIR) ++ set(CMAKE_INSTALL_OLDINCLUDEDIR "/usr/include" CACHE PATH "C header files for non-gcc (/usr/include)") ++endif() ++ ++if(NOT DEFINED CMAKE_INSTALL_DATAROOTDIR) ++ set(CMAKE_INSTALL_DATAROOTDIR "share" CACHE PATH "read-only architecture-independent data root (share)") ++endif() ++ ++#----------------------------------------------------------------------------- ++# Values whose defaults are relative to DATAROOTDIR. Store empty values in ++# the cache and store the defaults in local variables if the cache values are ++# not set explicitly. This auto-updates the defaults as DATAROOTDIR changes. ++ ++if(NOT CMAKE_INSTALL_DATADIR) ++ set(CMAKE_INSTALL_DATADIR "" CACHE PATH "read-only architecture-independent data (DATAROOTDIR)") ++ set(CMAKE_INSTALL_DATADIR "${CMAKE_INSTALL_DATAROOTDIR}") ++endif() ++ ++if(NOT CMAKE_INSTALL_INFODIR) ++ set(CMAKE_INSTALL_INFODIR "" CACHE PATH "info documentation (DATAROOTDIR/info)") ++ set(CMAKE_INSTALL_INFODIR "${CMAKE_INSTALL_DATAROOTDIR}/info") ++endif() ++ ++if(NOT CMAKE_INSTALL_LOCALEDIR) ++ set(CMAKE_INSTALL_LOCALEDIR "" CACHE PATH "locale-dependent data (DATAROOTDIR/locale)") ++ set(CMAKE_INSTALL_LOCALEDIR "${CMAKE_INSTALL_DATAROOTDIR}/locale") ++endif() ++ ++if(NOT CMAKE_INSTALL_MANDIR) ++ set(CMAKE_INSTALL_MANDIR "" CACHE PATH "man documentation (DATAROOTDIR/man)") ++ set(CMAKE_INSTALL_MANDIR "${CMAKE_INSTALL_DATAROOTDIR}/man") ++endif() ++ ++if(NOT CMAKE_INSTALL_DOCDIR) ++ set(CMAKE_INSTALL_DOCDIR "" CACHE PATH "documentation root (DATAROOTDIR/doc/PROJECT_NAME)") ++ set(CMAKE_INSTALL_DOCDIR "${CMAKE_INSTALL_DATAROOTDIR}/doc/${PROJECT_NAME}") ++endif() ++ ++#----------------------------------------------------------------------------- ++ ++mark_as_advanced( ++ CMAKE_INSTALL_BINDIR ++ CMAKE_INSTALL_SBINDIR ++ CMAKE_INSTALL_LIBEXECDIR ++ CMAKE_INSTALL_SYSCONFDIR ++ CMAKE_INSTALL_SHAREDSTATEDIR ++ CMAKE_INSTALL_LOCALSTATEDIR ++ CMAKE_INSTALL_LIBDIR ++ CMAKE_INSTALL_INCLUDEDIR ++ CMAKE_INSTALL_OLDINCLUDEDIR ++ CMAKE_INSTALL_DATAROOTDIR ++ CMAKE_INSTALL_DATADIR ++ CMAKE_INSTALL_INFODIR ++ CMAKE_INSTALL_LOCALEDIR ++ CMAKE_INSTALL_MANDIR ++ CMAKE_INSTALL_DOCDIR ++ ) ++ ++# Result directories ++# ++foreach(dir ++ BINDIR ++ SBINDIR ++ LIBEXECDIR ++ SYSCONFDIR ++ SHAREDSTATEDIR ++ LOCALSTATEDIR ++ LIBDIR ++ INCLUDEDIR ++ OLDINCLUDEDIR ++ DATAROOTDIR ++ DATADIR ++ INFODIR ++ LOCALEDIR ++ MANDIR ++ DOCDIR ++ ) ++ if(NOT IS_ABSOLUTE ${CMAKE_INSTALL_${dir}}) ++ set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_${dir}}") ++ else() ++ set(CMAKE_INSTALL_FULL_${dir} "${CMAKE_INSTALL_${dir}}") ++ endif() ++endforeach() +diff -Naur glm/CMakeLists.txt glmn/CMakeLists.txt +--- glm/CMakeLists.txt 2019-09-07 14:10:16.000000000 +0200 ++++ glmn/CMakeLists.txt 2019-09-23 00:10:29.559815104 +0200 +@@ -4,6 +4,11 @@ + set(GLM_VERSION "0.9.9") + project(glm VERSION ${GLM_VERSION} LANGUAGES CXX) + ++list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake") ++ ++include(GNUInstallDirs) ++include(CMakePackageConfigHelpers) ++ + enable_testing() + + option(GLM_QUIET "No CMake Message" OFF) +@@ -237,3 +242,62 @@ + add_subdirectory(glm) + add_subdirectory(test) + ++set(GLM_INSTALL_CONFIGDIR "${CMAKE_INSTALL_LIBDIR}/cmake/glm") ++install(DIRECTORY glm DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}) ++ ++ ++# CMake automatically adds an architecture compatibility check to make sure ++# 32 and 64 bit code is not accidentally mixed. For a header-only library this ++# is not required. The check can be disabled by temporarily unsetting ++# CMAKE_SIZEOF_VOID_P. In CMake 3.14 and later this can be achieved more cleanly ++# with write_basic_package_version_file(ARCH_INDEPENDENT). ++# TODO: Use this once a newer CMake can be required. ++set(GLM_SIZEOF_VOID_P ${CMAKE_SIZEOF_VOID_P}) ++unset(CMAKE_SIZEOF_VOID_P) ++write_basic_package_version_file("${CMAKE_CURRENT_BINARY_DIR}/glmConfigVersion.cmake" VERSION ${GLM_VERSION} COMPATIBILITY AnyNewerVersion) ++set(CMAKE_SIZEOF_VOID_P ${GLM_SIZEOF_VOID_P}) ++ ++# build tree package config ++configure_file(cmake/glmBuildConfig.cmake.in glmConfig.cmake @ONLY) ++ ++# install tree package config ++configure_package_config_file( ++ cmake/glmConfig.cmake.in ++ ${GLM_INSTALL_CONFIGDIR}/glmConfig.cmake ++ INSTALL_DESTINATION ${GLM_INSTALL_CONFIGDIR} ++ PATH_VARS CMAKE_INSTALL_INCLUDEDIR ++ NO_CHECK_REQUIRED_COMPONENTS_MACRO) ++ ++install(FILES ++ "${CMAKE_CURRENT_BINARY_DIR}/${GLM_INSTALL_CONFIGDIR}/glmConfig.cmake" ++ "${CMAKE_CURRENT_BINARY_DIR}/glmConfigVersion.cmake" ++ DESTINATION ${GLM_INSTALL_CONFIGDIR}) ++ ++add_library(glm INTERFACE) ++target_include_directories(glm INTERFACE ++ $ ++ $) ++install(TARGETS glm EXPORT glmTargets) ++ ++export(EXPORT glmTargets FILE "${CMAKE_CURRENT_BINARY_DIR}/glmTargets.cmake") ++ ++install(EXPORT glmTargets FILE glmTargets.cmake DESTINATION ${GLM_INSTALL_CONFIGDIR}) ++ ++# build pkg-config file ++configure_file("./cmake/glm.pc.in" "glm.pc" @ONLY) ++ ++# install pkg-config file ++install(FILES "${CMAKE_CURRENT_BINARY_DIR}/glm.pc" DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig") ++ ++export(PACKAGE glm) ++ ++if(NOT TARGET uninstall) ++ configure_file( ++ ${CMAKE_CURRENT_SOURCE_DIR}/cmake_uninstall.cmake.in ++ ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake ++ IMMEDIATE @ONLY) ++ ++ add_custom_target(uninstall ++ COMMAND ${CMAKE_COMMAND} -P ++ ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake) ++endif() +diff -Naur glm/cmake_uninstall.cmake.in glmn/cmake_uninstall.cmake.in +--- glm/cmake_uninstall.cmake.in 1970-01-01 01:00:00.000000000 +0100 ++++ glmn/cmake_uninstall.cmake.in 2019-09-23 00:12:22.495660449 +0200 +@@ -0,0 +1,26 @@ ++if(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") ++ message(FATAL_ERROR "Cannot find install manifest: @CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") ++endif(NOT EXISTS "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt") ++ ++if (NOT DEFINED CMAKE_INSTALL_PREFIX) ++ set (CMAKE_INSTALL_PREFIX "@CMAKE_INSTALL_PREFIX@") ++endif () ++ message(${CMAKE_INSTALL_PREFIX}) ++ ++file(READ "@CMAKE_CURRENT_BINARY_DIR@/install_manifest.txt" files) ++string(REGEX REPLACE "\n" ";" files "${files}") ++foreach(file ${files}) ++ message(STATUS "Uninstalling $ENV{DESTDIR}${file}") ++ if(IS_SYMLINK "$ENV{DESTDIR}${file}" OR EXISTS "$ENV{DESTDIR}${file}") ++ exec_program( ++ "@CMAKE_COMMAND@" ARGS "-E remove \"$ENV{DESTDIR}${file}\"" ++ OUTPUT_VARIABLE rm_out ++ RETURN_VALUE rm_retval ++ ) ++ if(NOT "${rm_retval}" STREQUAL 0) ++ message(FATAL_ERROR "Problem when removing $ENV{DESTDIR}${file}") ++ endif(NOT "${rm_retval}" STREQUAL 0) ++ else(IS_SYMLINK "$ENV{DESTDIR}${file}" OR EXISTS "$ENV{DESTDIR}${file}") ++ message(STATUS "File $ENV{DESTDIR}${file} does not exist.") ++ endif(IS_SYMLINK "$ENV{DESTDIR}${file}" OR EXISTS "$ENV{DESTDIR}${file}") ++endforeach(file) -- cgit v1.2.3 From 942c7889498fc8e680a16d500e166c9ade84e640 Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Mon, 23 Sep 2019 17:15:50 +0200 Subject: gnu: OpenEXR: Update to 2.4.0 [fixes CVE-2018-18443, CVE-2018-18444]. * gnu/packages/patches/ilmbase-fix-tests.patch: Adjust for new origin. * gnu/packages/patches/ilmbase-openexr-pkg-config.patch: New file. * gnu/local.mk (dist_patch_DATA): Adjust accordingly. * gnu/packages/graphics.scm (ilmbase): Update to 2.4.0. [source]: Change to GIT-FETCH, as tarballs are no longer provided. Add new patch. [build-system]: Change to CMAKE-BUILD-SYSTEM. [arguments]: Add phase to enter the correct source directory. * gnu/packages/graphics.scm (openexr): Update to 2.4.0. [source]: Inherit from ILMBASE, which comes from the same repository. [build-system]: Change to CMAKE-BUILD-SYSTEM. [arguments]: Add phase to enter the correct source directory. * gnu/packages/gstreamer.scm (gst-plugins-bad)[arguments]: Enable C++11. * gnu/packages/image-processing.scm (opencv)[arguments]: Likewise. --- gnu/local.mk | 1 + gnu/packages/graphics.scm | 46 +++++++++++++--------- gnu/packages/gstreamer.scm | 5 +++ gnu/packages/image-processing.scm | 4 ++ gnu/packages/patches/ilmbase-fix-tests.patch | 12 ++---- .../patches/ilmbase-openexr-pkg-config.patch | 40 +++++++++++++++++++ 6 files changed, 81 insertions(+), 27 deletions(-) create mode 100644 gnu/packages/patches/ilmbase-openexr-pkg-config.patch (limited to 'gnu/packages/patches') diff --git a/gnu/local.mk b/gnu/local.mk index 0e279d8303..bf0f9de26e 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -962,6 +962,7 @@ dist_patch_DATA = \ %D%/packages/patches/id3lib-CVE-2007-4460.patch \ %D%/packages/patches/idris-test-no-node.patch \ %D%/packages/patches/ilmbase-fix-tests.patch \ + %D%/packages/patches/ilmbase-openexr-pkg-config.patch \ %D%/packages/patches/intltool-perl-compatibility.patch \ %D%/packages/patches/irrlicht-use-system-libs.patch \ %D%/packages/patches/isc-dhcp-4.4.1-fixes-for-newer-bind.patch \ diff --git a/gnu/packages/graphics.scm b/gnu/packages/graphics.scm index d4e9adb84a..795e750cb5 100644 --- a/gnu/packages/graphics.scm +++ b/gnu/packages/graphics.scm @@ -16,6 +16,7 @@ ;;; Copyright © 2019 Steve Sprang ;;; Copyright © 2019 John Soo ;;; Copyright © 2019 Pierre Neidhardt +;;; Copyright © 2019 Marius Bakke ;;; ;;; This file is part of GNU Guix. ;;; @@ -327,17 +328,25 @@ (define-public cgal (define-public ilmbase (package (name "ilmbase") - (version "2.3.0") + (version "2.4.0") (source (origin - (method url-fetch) - (uri (string-append "https://github.com/openexr/openexr/releases" - "/download/v" version "/ilmbase-" - version ".tar.gz")) + (method git-fetch) + (uri (git-reference + (url "https://github.com/openexr/openexr") + (commit (string-append "v" version)))) + (file-name (git-file-name "ilmbase" version)) (sha256 (base32 - "0qiq5bqq9rxhqjiym2k36sx4vq8adgrz6xf6qwizi9bqm78phsa5")) - (patches (search-patches "ilmbase-fix-tests.patch")))) - (build-system gnu-build-system) + "0g3rz11cvb7gnphp2np9z7bfl7v4dprq4w5hnsvx7yrasgsdyn8s")) + (patches (search-patches "ilmbase-fix-tests.patch" + "ilmbase-openexr-pkg-config.patch")))) + (build-system cmake-build-system) + (arguments + `(#:phases (modify-phases %standard-phases + (add-after 'unpack 'change-directory + (lambda _ + (chdir "IlmBase") + #t))))) (home-page "http://www.openexr.com/") (synopsis "Utility C++ libraries for threads, maths, and exceptions") (description @@ -409,27 +418,26 @@ (define-public ogre (define-public openexr (package (name "openexr") - (version "2.3.0") + (version (package-version ilmbase)) (source (origin - (method url-fetch) - (uri (string-append "https://github.com/openexr/openexr/releases" - "/download/v" version "/openexr-" - version ".tar.gz")) - (sha256 - (base32 - "19jywbs9qjvsbkvlvzayzi81s976k53wg53vw4xj66lcgylb6v7x")) + (inherit (package-source ilmbase)) + (file-name (git-file-name "openexr" version)) (modules '((guix build utils))) (snippet '(begin - (substitute* (find-files "." "tmpDir\\.h") + (substitute* (find-files "OpenEXR" "tmpDir\\.h") (("\"/var/tmp/\"") "\"/tmp/\"")) #t)))) - (build-system gnu-build-system) + (build-system cmake-build-system) (arguments '(#:phases (modify-phases %standard-phases - (add-after 'unpack 'disable-broken-test + (add-after 'unpack 'change-directory + (lambda _ + (chdir "OpenEXR") + #t)) + (add-after 'change-directory 'disable-broken-test ;; This test fails on i686. Upstream developers suggest that ;; this test is broken on i686 and can be safely disabled: ;; https://github.com/openexr/openexr/issues/67#issuecomment-21169748 diff --git a/gnu/packages/gstreamer.scm b/gnu/packages/gstreamer.scm index 13c2c2fc27..8b81cc91a0 100644 --- a/gnu/packages/gstreamer.scm +++ b/gnu/packages/gstreamer.scm @@ -286,6 +286,11 @@ (define-public gst-plugins-bad (build-system gnu-build-system) (arguments '(#:tests? #f ; XXX: 13 of 53 tests fail + + ;; FIXME: OpenEXR 2.4.0 requires C++ 11 or later. Remove when the + ;; default compiler is >= GCC 5. + #:make-flags '("CXXFLAGS=-std=gnu++11") + #:configure-flags (list (string-append "--with-html-dir=" (assoc-ref %outputs "doc") diff --git a/gnu/packages/image-processing.scm b/gnu/packages/image-processing.scm index b3972a2b76..460f35dbae 100644 --- a/gnu/packages/image-processing.scm +++ b/gnu/packages/image-processing.scm @@ -269,6 +269,10 @@ (define-public opencv "-DWITH_CAROTENE=OFF" ; only visible on arm/aarch64 "-DENABLE_PRECOMPILED_HEADERS=OFF" + ;; FIXME: OpenEXR requires C++11 or later. Remove this when + ;; the default compiler is GCC 7. + "-DCMAKE_CXX_FLAGS=-std=gnu++11" + ;; CPU-Features: ;; See cmake/OpenCVCompilerOptimizations.cmake ;; (CPU_ALL_OPTIMIZATIONS) for a list of all optimizations diff --git a/gnu/packages/patches/ilmbase-fix-tests.patch b/gnu/packages/patches/ilmbase-fix-tests.patch index fcaa37d201..34d3a180c4 100644 --- a/gnu/packages/patches/ilmbase-fix-tests.patch +++ b/gnu/packages/patches/ilmbase-fix-tests.patch @@ -22,10 +22,8 @@ Date: Wed, 24 Feb 2016 01:04:11 +0000 Also fix a pre-existing typo. -Index: ilmbase/ImathTest/testBoxAlgo.cpp -=================================================================== ---- ilmbase.orig/ImathTest/testBoxAlgo.cpp -+++ ilmbase/ImathTest/testBoxAlgo.cpp +--- a/IlmBase/ImathTest/testBoxAlgo.cpp ++++ b/IlmBase/ImathTest/testBoxAlgo.cpp @@ -886,10 +886,11 @@ boxMatrixTransform () assert (approximatelyEqual (b2.min, b4.min, e)); @@ -54,10 +52,8 @@ On 32-bit x86, allow even greater discrepency at double precision, due to possible double-rounding. See https://lists.nongnu.org/archive/html/openexr-devel/2015-12/msg00001.html -Index: ilmbase/ImathTest/testBox.cpp -=================================================================== ---- ilmbase.orig/ImathTest/testBox.cpp -+++ ilmbase/ImathTest/testBox.cpp +--- a/IlmBase/ImathTest/testBox.cpp ++++ b/IlmBase/ImathTest/testBox.cpp @@ -47,6 +47,58 @@ using namespace IMATH_INTERNAL_NAMESPACE namespace { diff --git a/gnu/packages/patches/ilmbase-openexr-pkg-config.patch b/gnu/packages/patches/ilmbase-openexr-pkg-config.patch new file mode 100644 index 0000000000..99613080d8 --- /dev/null +++ b/gnu/packages/patches/ilmbase-openexr-pkg-config.patch @@ -0,0 +1,40 @@ +Fix pkg-config files when using the CMake build system. + +Upstream bug report: +https://github.com/openexr/openexr/issues/567 + +diff --git a/IlmBase/config/CMakeLists.txt b/IlmBase/config/CMakeLists.txt +index 508176a..9e6ab91 100644 +--- a/IlmBase/config/CMakeLists.txt ++++ b/IlmBase/config/CMakeLists.txt +@@ -71,9 +71,9 @@ if(ILMBASE_INSTALL_PKG_CONFIG) + # use a helper function to avoid variable pollution, but pretty simple + function(ilmbase_pkg_config_help pcinfile) + set(prefix ${CMAKE_INSTALL_PREFIX}) +- set(exec_prefix ${CMAKE_INSTALL_BINDIR}) +- set(libdir ${CMAKE_INSTALL_LIBDIR}) +- set(includedir ${CMAKE_INSTALL_INCLUDEDIR}) ++ set(exec_prefix ${CMAKE_INSTALL_FULL_BINDIR}) ++ set(libdir ${CMAKE_INSTALL_FULL_LIBDIR}) ++ set(includedir ${CMAKE_INSTALL_FULL_INCLUDEDIR}) + set(LIB_SUFFIX_DASH ${ILMBASE_LIB_SUFFIX}) + if(TARGET Threads::Threads) + # hrm, can't use properties as they end up as generator expressions +diff --git a/OpenEXR/config/CMakeLists.txt b/OpenEXR/config/CMakeLists.txt +index 1ef829a..b8dc141 100644 +--- a/OpenEXR/config/CMakeLists.txt ++++ b/OpenEXR/config/CMakeLists.txt +@@ -72,9 +72,9 @@ if(OPENEXR_INSTALL_PKG_CONFIG) + # use a helper function to avoid variable pollution, but pretty simple + function(openexr_pkg_config_help pcinfile) + set(prefix ${CMAKE_INSTALL_PREFIX}) +- set(exec_prefix ${CMAKE_INSTALL_BINDIR}) +- set(libdir ${CMAKE_INSTALL_LIBDIR}) +- set(includedir ${CMAKE_INSTALL_INCLUDEDIR}) ++ set(exec_prefix ${CMAKE_INSTALL_FULL_BINDIR}) ++ set(libdir ${CMAKE_INSTALL_FULL_LIBDIR}) ++ set(includedir ${CMAKE_INSTALL_FULL_INCLUDEDIR}) + set(LIB_SUFFIX_DASH ${OPENEXR_LIB_SUFFIX}) + if(TARGET Threads::Threads) + # hrm, can't use properties as they end up as generator expressions + -- cgit v1.2.3 From aa0e28bc73487f2298b494ab077526ba448a1c57 Mon Sep 17 00:00:00 2001 From: Marius Bakke Date: Mon, 23 Sep 2019 17:25:00 +0200 Subject: gnu: p11-kit: Update to 0.23.17. * gnu/packages/patches/p11-kit-jks-timestamps.patch: Delete file. * gnu/local.mk (dist_patch_DATA): Remove it. * gnu/packages/tls.scm (p11-kit): Update to 0.23.17. [source](patches): Remove. --- gnu/local.mk | 1 - gnu/packages/patches/p11-kit-jks-timestamps.patch | 42 ----------------------- gnu/packages/tls.scm | 5 ++- 3 files changed, 2 insertions(+), 46 deletions(-) delete mode 100644 gnu/packages/patches/p11-kit-jks-timestamps.patch (limited to 'gnu/packages/patches') diff --git a/gnu/local.mk b/gnu/local.mk index bf0f9de26e..840ef22bdb 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -1176,7 +1176,6 @@ dist_patch_DATA = \ %D%/packages/patches/osip-CVE-2017-7853.patch \ %D%/packages/patches/ots-no-include-missing-file.patch \ %D%/packages/patches/owncloud-disable-updatecheck.patch \ - %D%/packages/patches/p11-kit-jks-timestamps.patch \ %D%/packages/patches/p7zip-CVE-2016-9296.patch \ %D%/packages/patches/p7zip-CVE-2017-17969.patch \ %D%/packages/patches/p7zip-remove-unused-code.patch \ diff --git a/gnu/packages/patches/p11-kit-jks-timestamps.patch b/gnu/packages/patches/p11-kit-jks-timestamps.patch deleted file mode 100644 index 8cb8ed8684..0000000000 --- a/gnu/packages/patches/p11-kit-jks-timestamps.patch +++ /dev/null @@ -1,42 +0,0 @@ -Fix test failures induced by setting the SOURCE_DATE_EPOCH variable. - -Taken from upstream: . - -From 2a474e1fe8f4bd8b4ed7622e5cf3b2718a202562 Mon Sep 17 00:00:00 2001 -From: Daiki Ueno -Date: Mon, 28 Jan 2019 13:03:15 +0100 -Subject: [PATCH] extract-jks: Prefer _p11_extract_jks_timestamp to - SOURCE_DATE_EPOCH - -Give _p11_extract_jks_timestamp precedence over SOURCE_DATE_EPOCH so -that the test results are not affected by the envvar settings. ---- - trust/extract-jks.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/trust/extract-jks.c b/trust/extract-jks.c -index ad8dc35..a6f855f 100644 ---- a/trust/extract-jks.c -+++ b/trust/extract-jks.c -@@ -250,7 +250,9 @@ prepare_jks_buffer (p11_enumerate *ex, - * when this was this certificate was added to the keystore, however - * we don't have that information. Java uses time in milliseconds - */ -- { -+ if (_p11_extract_jks_timestamp) -+ now = _p11_extract_jks_timestamp; -+ else { - char *source_date_epoch; - source_date_epoch = secure_getenv ("SOURCE_DATE_EPOCH"); - if (source_date_epoch) { -@@ -276,9 +278,7 @@ prepare_jks_buffer (p11_enumerate *ex, - return false; - } - now = epoch; -- } else if (_p11_extract_jks_timestamp) -- now = _p11_extract_jks_timestamp; -- else -+ } else - now = time (NULL); - } - diff --git a/gnu/packages/tls.scm b/gnu/packages/tls.scm index 45ec4f796b..c06052239f 100644 --- a/gnu/packages/tls.scm +++ b/gnu/packages/tls.scm @@ -122,16 +122,15 @@ (define-public asn1c (define-public p11-kit (package (name "p11-kit") - (version "0.23.15") + (version "0.23.17") (source (origin (method url-fetch) (uri (string-append "https://github.com/p11-glue/p11-kit/releases/" "download/" version "/p11-kit-" version ".tar.gz")) - (patches (search-patches "p11-kit-jks-timestamps.patch")) (sha256 (base32 - "166pwj00cffv4qq4dvx0k53zka0b0r1fa0whc49007vsqyh3khgp")))) + "07kwdlw07jk9833k43kkhv0q9gkll3vmd25wwp68cpy0crfv4isl")))) (build-system gnu-build-system) (native-inputs `(("pkg-config" ,pkg-config))) -- cgit v1.2.3 From 4780db2c935110ea3254817ba0c519c229b9461e Mon Sep 17 00:00:00 2001 From: Eric Bavier Date: Mon, 16 Sep 2019 22:20:23 -0500 Subject: gnu: idris: Update to 1.3.2. * gnu/packages/haskell-xyz.scm (ghc-network-2.8, ghc-megaparsec-7): New variables. * gnu/packages/idris.scm (idris): Update to 1.3.2. [source]: Remove patch. [inputs]: Use ghc-network-2.8 and ghc-megaparsec-7. * gnu/packages/patches/idris-test-no-node.patch: Delete. * gnu/local.mk (dist_patch_DATA): Remove it. --- gnu/local.mk | 1 - gnu/packages/haskell-xyz.scm | 37 ++++++++++++++++ gnu/packages/idris.scm | 9 ++-- gnu/packages/patches/idris-test-no-node.patch | 61 --------------------------- 4 files changed, 41 insertions(+), 67 deletions(-) delete mode 100644 gnu/packages/patches/idris-test-no-node.patch (limited to 'gnu/packages/patches') diff --git a/gnu/local.mk b/gnu/local.mk index 840ef22bdb..da5fe09446 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -960,7 +960,6 @@ dist_patch_DATA = \ %D%/packages/patches/icedtea-6-hotspot-gcc-segfault-workaround.patch \ %D%/packages/patches/icedtea-7-hotspot-gcc-segfault-workaround.patch \ %D%/packages/patches/id3lib-CVE-2007-4460.patch \ - %D%/packages/patches/idris-test-no-node.patch \ %D%/packages/patches/ilmbase-fix-tests.patch \ %D%/packages/patches/ilmbase-openexr-pkg-config.patch \ %D%/packages/patches/intltool-perl-compatibility.patch \ diff --git a/gnu/packages/haskell-xyz.scm b/gnu/packages/haskell-xyz.scm index a36451fa8c..2977398880 100644 --- a/gnu/packages/haskell-xyz.scm +++ b/gnu/packages/haskell-xyz.scm @@ -62,6 +62,7 @@ (define-module (gnu packages haskell-xyz) #:use-module (guix build-system haskell) #:use-module (guix download) #:use-module (guix git-download) + #:use-module (guix utils) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix packages)) @@ -6070,6 +6071,24 @@ (define-public ghc-megaparsec speed, flexibility, and quality of parse errors.") (license license:bsd-2))) +;;; Idris 1.3.2 requires 'megaparse>=7.0.4' but we'd like to keep the public +;;; package at the current Stackage LTS version: +(define-public ghc-megaparsec-7 + (hidden-package + (package + (inherit ghc-megaparsec) + (version "7.0.5") + (source + (origin + (method url-fetch) + (uri (string-append "https://hackage.haskell.org/package/megaparsec/" + "megaparsec-" version ".tar.gz")) + (sha256 + (base32 + "0bqx1icbmk8s7wmbcdzsgnlh607c7kzg8l80cp02dxr5valjxp7j")))) + (arguments (strip-keyword-arguments (list #:cabal-revision) + (package-arguments ghc-megaparsec)))))) + (define-public ghc-memory (package (name "ghc-memory") @@ -6740,6 +6759,24 @@ (define-public ghc-network "This package provides a low-level networking interface.") (license license:bsd-3))) +;;; Until we update our default GHC to >=8.6 we cannot update our ghc-network +;;; package, since the 'cabal-install' package that supports the current +;;; 'Cabal' module requires 'network==2.6.*'. Here we provide an updated +;;; version to be used for our idris package. +(define-public ghc-network-2.8 + (hidden-package + (package + (inherit ghc-network) + (version "2.8.0.1") + (source + (origin + (method url-fetch) + (uri (string-append "https://hackage.haskell.org/package/network/" + "network-" version ".tar.gz")) + (sha256 + (base32 + "0im8k51rw3ahmr23ny10pshwbz09jfg0fdpam0hzf2hgxnzmvxb1"))))))) + (define-public ghc-network-info (package (name "ghc-network-info") diff --git a/gnu/packages/idris.scm b/gnu/packages/idris.scm index 894a19f0aa..7e6ee302b0 100644 --- a/gnu/packages/idris.scm +++ b/gnu/packages/idris.scm @@ -38,7 +38,7 @@ (define-module (gnu packages idris) (define-public idris (package (name "idris") - (version "1.3.1") + (version "1.3.2") (source (origin (method url-fetch) (uri (string-append @@ -46,8 +46,7 @@ (define-public idris "idris-" version "/idris-" version ".tar.gz")) (sha256 (base32 - "0fn9h58l592j72njwma1ia48h8h87wi2rjqfxs7j2lfmvgfv18fi")) - (patches (search-patches "idris-test-no-node.patch")))) + "0wychzkg0yghd2pp8fqz78vp1ayzks191knfpl7mhh8igsmb6bc7")))) (build-system haskell-build-system) (native-inputs ;For tests `(("perl" ,perl) @@ -71,8 +70,8 @@ (define-public idris ("ghc-fsnotify" ,ghc-fsnotify) ("ghc-ieee754" ,ghc-ieee754) ("ghc-libffi" ,ghc-libffi) - ("ghc-megaparsec" ,ghc-megaparsec) - ("ghc-network" ,ghc-network) + ("ghc-megaparsec" ,ghc-megaparsec-7) + ("ghc-network" ,ghc-network-2.8) ("ghc-optparse-applicative" ,ghc-optparse-applicative) ("ghc-regex-tdfa" ,ghc-regex-tdfa) ("ghc-safe" ,ghc-safe) diff --git a/gnu/packages/patches/idris-test-no-node.patch b/gnu/packages/patches/idris-test-no-node.patch deleted file mode 100644 index c04ad41a8e..0000000000 --- a/gnu/packages/patches/idris-test-no-node.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 6c52e1b902b869c25e2fe39cff6364143a04da61 Mon Sep 17 00:00:00 2001 -From: Niklas Larsson -Date: Tue, 11 Dec 2018 19:56:22 +0100 -Subject: [PATCH] Only check for Node when required - ---- - test/TestRun.hs | 34 ++++++++++++++++++++-------------- - 1 file changed, 20 insertions(+), 14 deletions(-) - -diff --git a/test/TestRun.hs b/test/TestRun.hs -index c7db9fdcd..4809911f3 100644 ---- a/test/TestRun.hs -+++ b/test/TestRun.hs -@@ -11,6 +11,7 @@ import Data.Proxy - import Data.Typeable - import Options.Applicative - import System.Directory -+import System.Environment - import System.Exit - import System.FilePath (()) - import System.Info -@@ -103,20 +104,25 @@ runTest path flags = do - normalise (x : xs) = x : normalise xs - normalise [] = [] - -+checkNode :: IO () -+checkNode = do -+ nodePath <- findExecutable "node" -+ nodejsPath <- findExecutable "nodejs" -+ let node = nodePath <|> nodejsPath -+ case node of -+ Nothing -> do -+ putStrLn "For running the test suite against Node, node must be installed." -+ exitFailure -+ Just _ -> return () -+ - main :: IO () - main = do -- nodePath <- findExecutable "node" -- nodejsPath <- findExecutable "nodejs" -- let node = nodePath <|> nodejsPath -- case node of -- Nothing -> do -- putStrLn "For running the test suite against Node, node must be installed." -- exitFailure -- Just _ -> do -- defaultMainWithIngredients ingredients $ -+ args <- getArgs -+ when ("--node" `elem` args) checkNode -+ defaultMainWithIngredients ingredients $ - askOption $ \(NodeOpt node) -> -- let (codegen, flags) = if node then (JS, ["--codegen", "node"]) -- else (C , []) -- in -- mkGoldenTests (testFamiliesForCodegen codegen) -- (flags ++ idrisFlags) -+ let (codegen, flags) = if node then (JS, ["--codegen", "node"]) -+ else (C , []) -+ in -+ mkGoldenTests (testFamiliesForCodegen codegen) (flags ++ idrisFlags) -+ -- cgit v1.2.3 From 8dc3c2a7d5fbe28b6f8ae27788b053be0d87b0b6 Mon Sep 17 00:00:00 2001 From: Kei Kebrau Date: Mon, 7 Jan 2019 19:36:49 -0500 Subject: gnu: freeimage: Update to 3.18.0. * gnu/packages/image.scm (freeimage): Update to 3.18.0. [source]: Modify snippet to remove the bundled libjxr. Remove obsolete patches. [arguments]: Add libjxr include directory to #:make-flags. [inputs]: Add libjxr. * gnu/packages/patches/freeimage-CVE-2015-0852.patch, gnu/packages/patches/freeimage-CVE-2016-5684.patch, gnu/packages/patches/freeimage-fix-build-with-gcc-5.patch: Delete files. * gnu/local.mk (dist_patch_DATA): Unregister patches. * gnu/packages/patches/freeimage-unbundle.patch: Update patch. Signed-off-by: Marius Bakke --- gnu/local.mk | 3 - gnu/packages/image.scm | 16 +- gnu/packages/patches/freeimage-CVE-2015-0852.patch | 129 -- gnu/packages/patches/freeimage-CVE-2016-5684.patch | 34 - .../patches/freeimage-fix-build-with-gcc-5.patch | 1453 -------------------- gnu/packages/patches/freeimage-unbundle.patch | 167 ++- 6 files changed, 138 insertions(+), 1664 deletions(-) delete mode 100644 gnu/packages/patches/freeimage-CVE-2015-0852.patch delete mode 100644 gnu/packages/patches/freeimage-CVE-2016-5684.patch delete mode 100644 gnu/packages/patches/freeimage-fix-build-with-gcc-5.patch (limited to 'gnu/packages/patches') diff --git a/gnu/local.mk b/gnu/local.mk index 23fc317d50..919e836b8c 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -828,9 +828,6 @@ dist_patch_DATA = \ %D%/packages/patches/flint-ldconfig.patch \ %D%/packages/patches/foomatic-filters-CVE-2015-8327.patch \ %D%/packages/patches/foomatic-filters-CVE-2015-8560.patch \ - %D%/packages/patches/freeimage-CVE-2015-0852.patch \ - %D%/packages/patches/freeimage-CVE-2016-5684.patch \ - %D%/packages/patches/freeimage-fix-build-with-gcc-5.patch \ %D%/packages/patches/freeimage-unbundle.patch \ %D%/packages/patches/fuse-overlapping-headers.patch \ %D%/packages/patches/gawk-shell.patch \ diff --git a/gnu/packages/image.scm b/gnu/packages/image.scm index d1a4a58575..d03f4548c5 100644 --- a/gnu/packages/image.scm +++ b/gnu/packages/image.scm @@ -957,7 +957,7 @@ (define-public giblib (define-public freeimage (package (name "freeimage") - (version "3.17.0") + (version "3.18.0") (source (origin (method url-fetch) (uri (string-append @@ -967,7 +967,7 @@ (define-public freeimage ".zip")) (sha256 (base32 - "12bz57asdcfsz3zr9i9nska0fb6h3z2aizy412qjqkixkginbz7v")) + "1z9qwi9mlq69d5jipr3v2jika2g0kszqdzilggm99nls5xl7j4zl")) (modules '((guix build utils))) (snippet '(begin @@ -975,12 +975,8 @@ (define-public freeimage (lambda (dir) (delete-file-recursively (string-append "Source/" dir))) '("LibJPEG" "LibOpenJPEG" "LibPNG" "LibRawLite" - ;; "LibJXR" - "LibWebP" "OpenEXR" "ZLib")))) - (patches (search-patches "freeimage-unbundle.patch" - "freeimage-CVE-2015-0852.patch" - "freeimage-CVE-2016-5684.patch" - "freeimage-fix-build-with-gcc-5.patch")))) + "LibJXR" "LibWebP" "OpenEXR" "ZLib")))) + (patches (search-patches "freeimage-unbundle.patch")))) (build-system gnu-build-system) (arguments '(#:phases @@ -1011,7 +1007,7 @@ (define-public freeimage ;; We need '-fpermissive' for Source/FreeImage.h. ;; libjxr doesn't have a pkg-config file. (string-append "CFLAGS+=-O2 -fPIC -fvisibility=hidden -fpermissive " - ;;"-I" (assoc-ref %build-inputs "libjxr") "/include/jxrlib" + "-I" (assoc-ref %build-inputs "libjxr") "/include/jxrlib " ;; FIXME: OpenEXR 2.4.0 requires C++11 or later. ;; Remove when the default compiler is > GCC 5. @@ -1022,7 +1018,7 @@ (define-public freeimage ("unzip" ,unzip))) (inputs `(("libjpeg" ,libjpeg) - ;("libjxr" ,libjxr) + ("libjxr" ,libjxr) ("libpng" ,libpng) ("libraw" ,libraw) ("libtiff" ,libtiff) diff --git a/gnu/packages/patches/freeimage-CVE-2015-0852.patch b/gnu/packages/patches/freeimage-CVE-2015-0852.patch deleted file mode 100644 index 34d538e925..0000000000 --- a/gnu/packages/patches/freeimage-CVE-2015-0852.patch +++ /dev/null @@ -1,129 +0,0 @@ -Copied from Debian. - -Description: fix integer overflow -Origin: upstream - http://freeimage.cvs.sourceforge.net/viewvc/freeimage/FreeImage/Source/FreeImage/PluginPCX.cpp?view=patch&r1=1.17&r2=1.18&pathrev=MAIN - http://freeimage.cvs.sourceforge.net/viewvc/freeimage/FreeImage/Source/FreeImage/PluginPCX.cpp?view=patch&r1=1.18&r2=1.19&pathrev=MAIN -Bug-Debian: https://bugs.debian.org/797165 -Last-Update: 2015-09-14 ---- -This patch header follows DEP-3: http://dep.debian.net/deps/dep3/ -Index: freeimage/Source/FreeImage/PluginPCX.cpp -=================================================================== ---- freeimage.orig/Source/FreeImage/PluginPCX.cpp -+++ freeimage/Source/FreeImage/PluginPCX.cpp -@@ -347,12 +347,14 @@ Load(FreeImageIO *io, fi_handle handle, - - try { - // check PCX identifier -- -- long start_pos = io->tell_proc(handle); -- BOOL validated = pcx_validate(io, handle); -- io->seek_proc(handle, start_pos, SEEK_SET); -- if(!validated) { -- throw FI_MSG_ERROR_MAGIC_NUMBER; -+ // (note: should have been already validated using FreeImage_GetFileType but check again) -+ { -+ long start_pos = io->tell_proc(handle); -+ BOOL validated = pcx_validate(io, handle); -+ io->seek_proc(handle, start_pos, SEEK_SET); -+ if(!validated) { -+ throw FI_MSG_ERROR_MAGIC_NUMBER; -+ } - } - - // process the header -@@ -366,20 +368,38 @@ Load(FreeImageIO *io, fi_handle handle, - SwapHeader(&header); - #endif - -- // allocate a new DIB -+ // process the window -+ const WORD *window = header.window; // left, upper, right,lower pixel coord. -+ const int left = window[0]; -+ const int top = window[1]; -+ const int right = window[2]; -+ const int bottom = window[3]; - -- unsigned width = header.window[2] - header.window[0] + 1; -- unsigned height = header.window[3] - header.window[1] + 1; -- unsigned bitcount = header.bpp * header.planes; -- -- if (bitcount == 24) { -- dib = FreeImage_AllocateHeader(header_only, width, height, bitcount, FI_RGBA_RED_MASK, FI_RGBA_GREEN_MASK, FI_RGBA_BLUE_MASK); -- } else { -- dib = FreeImage_AllocateHeader(header_only, width, height, bitcount); -+ // check image size -+ if((left >= right) || (top >= bottom)) { -+ throw FI_MSG_ERROR_PARSING; - } - -- // if the dib couldn't be allocated, throw an error -+ const unsigned width = right - left + 1; -+ const unsigned height = bottom - top + 1; -+ const unsigned bitcount = header.bpp * header.planes; -+ -+ // allocate a new DIB -+ switch(bitcount) { -+ case 1: -+ case 4: -+ case 8: -+ dib = FreeImage_AllocateHeader(header_only, width, height, bitcount); -+ break; -+ case 24: -+ dib = FreeImage_AllocateHeader(header_only, width, height, bitcount, FI_RGBA_RED_MASK, FI_RGBA_GREEN_MASK, FI_RGBA_BLUE_MASK); -+ break; -+ default: -+ throw FI_MSG_ERROR_DIB_MEMORY; -+ break; -+ } - -+ // if the dib couldn't be allocated, throw an error - if (!dib) { - throw FI_MSG_ERROR_DIB_MEMORY; - } -@@ -426,19 +446,23 @@ Load(FreeImageIO *io, fi_handle handle, - - if (palette_id == 0x0C) { - BYTE *cmap = (BYTE*)malloc(768 * sizeof(BYTE)); -- io->read_proc(cmap, 768, 1, handle); - -- pal = FreeImage_GetPalette(dib); -- BYTE *pColormap = &cmap[0]; -+ if(cmap) { -+ io->read_proc(cmap, 768, 1, handle); - -- for(int i = 0; i < 256; i++) { -- pal[i].rgbRed = pColormap[0]; -- pal[i].rgbGreen = pColormap[1]; -- pal[i].rgbBlue = pColormap[2]; -- pColormap += 3; -+ pal = FreeImage_GetPalette(dib); -+ BYTE *pColormap = &cmap[0]; -+ -+ for(int i = 0; i < 256; i++) { -+ pal[i].rgbRed = pColormap[0]; -+ pal[i].rgbGreen = pColormap[1]; -+ pal[i].rgbBlue = pColormap[2]; -+ pColormap += 3; -+ } -+ -+ free(cmap); - } - -- free(cmap); - } - - // wrong palette ID, perhaps a gray scale is needed ? -@@ -466,9 +490,9 @@ Load(FreeImageIO *io, fi_handle handle, - // calculate the line length for the PCX and the DIB - - // length of raster line in bytes -- unsigned linelength = header.bytes_per_line * header.planes; -+ const unsigned linelength = header.bytes_per_line * header.planes; - // length of DIB line (rounded to DWORD) in bytes -- unsigned pitch = FreeImage_GetPitch(dib); -+ const unsigned pitch = FreeImage_GetPitch(dib); - - // run-length encoding ? - diff --git a/gnu/packages/patches/freeimage-CVE-2016-5684.patch b/gnu/packages/patches/freeimage-CVE-2016-5684.patch deleted file mode 100644 index 2fc02d7b0d..0000000000 --- a/gnu/packages/patches/freeimage-CVE-2016-5684.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: Debian Science Maintainers - -Date: Mon, 10 Oct 2016 08:22:44 +0100 -Subject: CVE-2016-5684 - ---- - Source/FreeImage/PluginXPM.cpp | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - -diff --git a/Source/FreeImage/PluginXPM.cpp b/Source/FreeImage/PluginXPM.cpp -index a698321..cc7bd07 100644 ---- a/Source/FreeImage/PluginXPM.cpp -+++ b/Source/FreeImage/PluginXPM.cpp -@@ -181,6 +181,11 @@ Load(FreeImageIO *io, fi_handle handle, int page, int flags, void *data) { - } - free(str); - -+ // check info string -+ if((width <= 0) || (height <= 0) || (colors <= 0) || (cpp <= 0)) { -+ throw "Improperly formed info string"; -+ } -+ - if (colors > 256) { - dib = FreeImage_AllocateHeader(header_only, width, height, 24, FI_RGBA_RED_MASK, FI_RGBA_GREEN_MASK, FI_RGBA_BLUE_MASK); - } else { -@@ -193,7 +198,7 @@ Load(FreeImageIO *io, fi_handle handle, int page, int flags, void *data) { - FILE_RGBA rgba; - - str = ReadString(io, handle); -- if(!str) -+ if(!str || (strlen(str) < (size_t)cpp)) - throw "Error reading color strings"; - - std::string chrs(str,cpp); //create a string for the color chars using the first cpp chars diff --git a/gnu/packages/patches/freeimage-fix-build-with-gcc-5.patch b/gnu/packages/patches/freeimage-fix-build-with-gcc-5.patch deleted file mode 100644 index 2c9f2c3357..0000000000 --- a/gnu/packages/patches/freeimage-fix-build-with-gcc-5.patch +++ /dev/null @@ -1,1453 +0,0 @@ -The original patch was downloaded from here: -https://chromium-review.googlesource.com/c/297211 - -The paths, file names, and line endings have been adapted. - -From eebaf97f5a1cb713d81d311308d8a48c124e5aef Mon Sep 17 00:00:00 2001 -From: James Zern -Date: Wed, 02 Sep 2015 23:21:13 -0700 -Subject: [PATCH] dsp/mips: add whitespace around stringizing operator - -fixes compile with gcc 5.1 -BUG=259 - -Change-Id: Ideb39c6290ab8569b1b6cc835bea11c822d0286c ---- - -diff --git a/Source/LibWebP/src/dsp/dsp.dec_mips_dsp_r2.c b/Source/LibWebP/src/dsp/dsp.dec_mips_dsp_r2.c -index 6590f43..40e4d82 100644 ---- a/Source/LibWebP/src/dsp/dsp.dec_mips_dsp_r2.c -+++ b/Source/LibWebP/src/dsp/dsp.dec_mips_dsp_r2.c -@@ -548,10 +548,10 @@ - // TEMP3 = SRC[D + D1 * BPS] - #define LOAD_4_BYTES(TEMP0, TEMP1, TEMP2, TEMP3, \ - A, A1, B, B1, C, C1, D, D1, SRC) \ -- "lbu %["#TEMP0"], "#A"+"#A1"*"XSTR(BPS)"(%["#SRC"]) \n\t" \ -- "lbu %["#TEMP1"], "#B"+"#B1"*"XSTR(BPS)"(%["#SRC"]) \n\t" \ -- "lbu %["#TEMP2"], "#C"+"#C1"*"XSTR(BPS)"(%["#SRC"]) \n\t" \ -- "lbu %["#TEMP3"], "#D"+"#D1"*"XSTR(BPS)"(%["#SRC"]) \n\t" \ -+ "lbu %[" #TEMP0 "], " #A "+" #A1 "*"XSTR(BPS)"(%[" #SRC "]) \n\t" \ -+ "lbu %[" #TEMP1 "], " #B "+" #B1 "*"XSTR(BPS)"(%[" #SRC "]) \n\t" \ -+ "lbu %[" #TEMP2 "], " #C "+" #C1 "*"XSTR(BPS)"(%[" #SRC "]) \n\t" \ -+ "lbu %[" #TEMP3 "], " #D "+" #D1 "*"XSTR(BPS)"(%[" #SRC "]) \n\t" \ - - static void SimpleHFilter16(uint8_t* p, int stride, int thresh) { - int i; -@@ -623,8 +623,8 @@ - // DST[A * BPS] = TEMP0 - // DST[B + C * BPS] = TEMP1 - #define STORE_8_BYTES(TEMP0, TEMP1, A, B, C, DST) \ -- "usw %["#TEMP0"], "#A"*"XSTR(BPS)"(%["#DST"]) \n\t" \ -- "usw %["#TEMP1"], "#B"+"#C"*"XSTR(BPS)"(%["#DST"]) \n\t" -+ "usw %[" #TEMP0 "], " #A "*"XSTR(BPS)"(%[" #DST "]) \n\t" \ -+ "usw %[" #TEMP1 "], " #B "+" #C "*"XSTR(BPS)"(%[" #DST "]) \n\t" - - static void VE4(uint8_t* dst) { // vertical - const uint8_t* top = dst - BPS; -@@ -725,8 +725,8 @@ - // TEMP0 = SRC[A * BPS] - // TEMP1 = SRC[B + C * BPS] - #define LOAD_8_BYTES(TEMP0, TEMP1, A, B, C, SRC) \ -- "ulw %["#TEMP0"], "#A"*"XSTR(BPS)"(%["#SRC"]) \n\t" \ -- "ulw %["#TEMP1"], "#B"+"#C"*"XSTR(BPS)"(%["#SRC"]) \n\t" -+ "ulw %[" #TEMP0 "], " #A "*"XSTR(BPS)"(%[" #SRC "]) \n\t" \ -+ "ulw %[" #TEMP1 "], " #B "+" #C "*"XSTR(BPS)"(%[" #SRC "]) \n\t" - - static void LD4(uint8_t* dst) { // Down-Left - int temp0, temp1, temp2, temp3, temp4; -@@ -873,24 +873,24 @@ - #define CLIPPING(SIZE) \ - "preceu.ph.qbl %[temp2], %[temp0] \n\t" \ - "preceu.ph.qbr %[temp0], %[temp0] \n\t" \ --".if "#SIZE" == 8 \n\t" \ -+".if " #SIZE " == 8 \n\t" \ - "preceu.ph.qbl %[temp3], %[temp1] \n\t" \ - "preceu.ph.qbr %[temp1], %[temp1] \n\t" \ - ".endif \n\t" \ - "addu.ph %[temp2], %[temp2], %[dst_1] \n\t" \ - "addu.ph %[temp0], %[temp0], %[dst_1] \n\t" \ --".if "#SIZE" == 8 \n\t" \ -+".if " #SIZE " == 8 \n\t" \ - "addu.ph %[temp3], %[temp3], %[dst_1] \n\t" \ - "addu.ph %[temp1], %[temp1], %[dst_1] \n\t" \ - ".endif \n\t" \ - "shll_s.ph %[temp2], %[temp2], 7 \n\t" \ - "shll_s.ph %[temp0], %[temp0], 7 \n\t" \ --".if "#SIZE" == 8 \n\t" \ -+".if " #SIZE " == 8 \n\t" \ - "shll_s.ph %[temp3], %[temp3], 7 \n\t" \ - "shll_s.ph %[temp1], %[temp1], 7 \n\t" \ - ".endif \n\t" \ - "precrqu_s.qb.ph %[temp0], %[temp2], %[temp0] \n\t" \ --".if "#SIZE" == 8 \n\t" \ -+".if " #SIZE " == 8 \n\t" \ - "precrqu_s.qb.ph %[temp1], %[temp3], %[temp1] \n\t" \ - ".endif \n\t" - -@@ -899,7 +899,7 @@ - int dst_1 = ((int)(DST)[-1] << 16) + (DST)[-1]; \ - int temp0, temp1, temp2, temp3; \ - __asm__ volatile ( \ -- ".if "#SIZE" < 8 \n\t" \ -+ ".if " #SIZE " < 8 \n\t" \ - "ulw %[temp0], 0(%[top]) \n\t" \ - "subu.ph %[dst_1], %[dst_1], %[top_1] \n\t" \ - CLIPPING(4) \ -@@ -911,7 +911,7 @@ - CLIPPING(8) \ - "usw %[temp0], 0(%[dst]) \n\t" \ - "usw %[temp1], 4(%[dst]) \n\t" \ -- ".if "#SIZE" == 16 \n\t" \ -+ ".if " #SIZE " == 16 \n\t" \ - "ulw %[temp0], 8(%[top]) \n\t" \ - "ulw %[temp1], 12(%[top]) \n\t" \ - CLIPPING(8) \ -diff --git a/Source/LibWebP/src/dsp/dsp.enc_mips32.c b/Source/LibWebP/src/dsp/dsp.enc_mips32.c -index c5837f1..b50e08b 100644 ---- a/Source/LibWebP/src/dsp/dsp.enc_mips32.c -+++ b/Source/LibWebP/src/dsp/dsp.enc_mips32.c -@@ -31,26 +31,26 @@ - // TEMP0..TEMP3 - registers for corresponding tmp elements - // TEMP4..TEMP5 - temporary registers - #define VERTICAL_PASS(A, B, C, D, TEMP4, TEMP0, TEMP1, TEMP2, TEMP3) \ -- "lh %[temp16], "#A"(%[temp20]) \n\t" \ -- "lh %[temp18], "#B"(%[temp20]) \n\t" \ -- "lh %[temp17], "#C"(%[temp20]) \n\t" \ -- "lh %[temp19], "#D"(%[temp20]) \n\t" \ -- "addu %["#TEMP4"], %[temp16], %[temp18] \n\t" \ -- "subu %[temp16], %[temp16], %[temp18] \n\t" \ -- "mul %["#TEMP0"], %[temp17], %[kC2] \n\t" \ -- "mul %[temp18], %[temp19], %[kC1] \n\t" \ -- "mul %[temp17], %[temp17], %[kC1] \n\t" \ -- "mul %[temp19], %[temp19], %[kC2] \n\t" \ -- "sra %["#TEMP0"], %["#TEMP0"], 16 \n\n" \ -- "sra %[temp18], %[temp18], 16 \n\n" \ -- "sra %[temp17], %[temp17], 16 \n\n" \ -- "sra %[temp19], %[temp19], 16 \n\n" \ -- "subu %["#TEMP2"], %["#TEMP0"], %[temp18] \n\t" \ -- "addu %["#TEMP3"], %[temp17], %[temp19] \n\t" \ -- "addu %["#TEMP0"], %["#TEMP4"], %["#TEMP3"] \n\t" \ -- "addu %["#TEMP1"], %[temp16], %["#TEMP2"] \n\t" \ -- "subu %["#TEMP2"], %[temp16], %["#TEMP2"] \n\t" \ -- "subu %["#TEMP3"], %["#TEMP4"], %["#TEMP3"] \n\t" -+ "lh %[temp16], " #A "(%[temp20]) \n\t" \ -+ "lh %[temp18], " #B "(%[temp20]) \n\t" \ -+ "lh %[temp17], " #C "(%[temp20]) \n\t" \ -+ "lh %[temp19], " #D "(%[temp20]) \n\t" \ -+ "addu %[" #TEMP4 "], %[temp16], %[temp18] \n\t" \ -+ "subu %[temp16], %[temp16], %[temp18] \n\t" \ -+ "mul %[" #TEMP0 "], %[temp17], %[kC2] \n\t" \ -+ "mul %[temp18], %[temp19], %[kC1] \n\t" \ -+ "mul %[temp17], %[temp17], %[kC1] \n\t" \ -+ "mul %[temp19], %[temp19], %[kC2] \n\t" \ -+ "sra %[" #TEMP0 "], %[" #TEMP0 "], 16 \n\n" \ -+ "sra %[temp18], %[temp18], 16 \n\n" \ -+ "sra %[temp17], %[temp17], 16 \n\n" \ -+ "sra %[temp19], %[temp19], 16 \n\n" \ -+ "subu %[" #TEMP2 "], %[" #TEMP0 "], %[temp18] \n\t" \ -+ "addu %[" #TEMP3 "], %[temp17], %[temp19] \n\t" \ -+ "addu %[" #TEMP0 "], %[" #TEMP4 "], %[" #TEMP3 "] \n\t" \ -+ "addu %[" #TEMP1 "], %[temp16], %[" #TEMP2 "] \n\t" \ -+ "subu %[" #TEMP2 "], %[temp16], %[" #TEMP2 "] \n\t" \ -+ "subu %[" #TEMP3 "], %[" #TEMP4 "], %[" #TEMP3 "] \n\t" - - // macro for one horizontal pass in ITransformOne - // MUL and STORE macros inlined -@@ -58,59 +58,59 @@ - // temp0..temp15 holds tmp[0]..tmp[15] - // A - offset in bytes to load from ref and store to dst buffer - // TEMP0, TEMP4, TEMP8 and TEMP12 - registers for corresponding tmp elements --#define HORIZONTAL_PASS(A, TEMP0, TEMP4, TEMP8, TEMP12) \ -- "addiu %["#TEMP0"], %["#TEMP0"], 4 \n\t" \ -- "addu %[temp16], %["#TEMP0"], %["#TEMP8"] \n\t" \ -- "subu %[temp17], %["#TEMP0"], %["#TEMP8"] \n\t" \ -- "mul %["#TEMP0"], %["#TEMP4"], %[kC2] \n\t" \ -- "mul %["#TEMP8"], %["#TEMP12"], %[kC1] \n\t" \ -- "mul %["#TEMP4"], %["#TEMP4"], %[kC1] \n\t" \ -- "mul %["#TEMP12"], %["#TEMP12"], %[kC2] \n\t" \ -- "sra %["#TEMP0"], %["#TEMP0"], 16 \n\t" \ -- "sra %["#TEMP8"], %["#TEMP8"], 16 \n\t" \ -- "sra %["#TEMP4"], %["#TEMP4"], 16 \n\t" \ -- "sra %["#TEMP12"], %["#TEMP12"], 16 \n\t" \ -- "subu %[temp18], %["#TEMP0"], %["#TEMP8"] \n\t" \ -- "addu %[temp19], %["#TEMP4"], %["#TEMP12"] \n\t" \ -- "addu %["#TEMP0"], %[temp16], %[temp19] \n\t" \ -- "addu %["#TEMP4"], %[temp17], %[temp18] \n\t" \ -- "subu %["#TEMP8"], %[temp17], %[temp18] \n\t" \ -- "subu %["#TEMP12"], %[temp16], %[temp19] \n\t" \ -- "lw %[temp20], 0(%[args]) \n\t" \ -- "sra %["#TEMP0"], %["#TEMP0"], 3 \n\t" \ -- "sra %["#TEMP4"], %["#TEMP4"], 3 \n\t" \ -- "sra %["#TEMP8"], %["#TEMP8"], 3 \n\t" \ -- "sra %["#TEMP12"], %["#TEMP12"], 3 \n\t" \ -- "lbu %[temp16], 0+"XSTR(BPS)"*"#A"(%[temp20]) \n\t" \ -- "lbu %[temp17], 1+"XSTR(BPS)"*"#A"(%[temp20]) \n\t" \ -- "lbu %[temp18], 2+"XSTR(BPS)"*"#A"(%[temp20]) \n\t" \ -- "lbu %[temp19], 3+"XSTR(BPS)"*"#A"(%[temp20]) \n\t" \ -- "addu %["#TEMP0"], %[temp16], %["#TEMP0"] \n\t" \ -- "addu %["#TEMP4"], %[temp17], %["#TEMP4"] \n\t" \ -- "addu %["#TEMP8"], %[temp18], %["#TEMP8"] \n\t" \ -- "addu %["#TEMP12"], %[temp19], %["#TEMP12"] \n\t" \ -- "slt %[temp16], %["#TEMP0"], $zero \n\t" \ -- "slt %[temp17], %["#TEMP4"], $zero \n\t" \ -- "slt %[temp18], %["#TEMP8"], $zero \n\t" \ -- "slt %[temp19], %["#TEMP12"], $zero \n\t" \ -- "movn %["#TEMP0"], $zero, %[temp16] \n\t" \ -- "movn %["#TEMP4"], $zero, %[temp17] \n\t" \ -- "movn %["#TEMP8"], $zero, %[temp18] \n\t" \ -- "movn %["#TEMP12"], $zero, %[temp19] \n\t" \ -- "addiu %[temp20], $zero, 255 \n\t" \ -- "slt %[temp16], %["#TEMP0"], %[temp20] \n\t" \ -- "slt %[temp17], %["#TEMP4"], %[temp20] \n\t" \ -- "slt %[temp18], %["#TEMP8"], %[temp20] \n\t" \ -- "slt %[temp19], %["#TEMP12"], %[temp20] \n\t" \ -- "movz %["#TEMP0"], %[temp20], %[temp16] \n\t" \ -- "movz %["#TEMP4"], %[temp20], %[temp17] \n\t" \ -- "lw %[temp16], 8(%[args]) \n\t" \ -- "movz %["#TEMP8"], %[temp20], %[temp18] \n\t" \ -- "movz %["#TEMP12"], %[temp20], %[temp19] \n\t" \ -- "sb %["#TEMP0"], 0+"XSTR(BPS)"*"#A"(%[temp16]) \n\t" \ -- "sb %["#TEMP4"], 1+"XSTR(BPS)"*"#A"(%[temp16]) \n\t" \ -- "sb %["#TEMP8"], 2+"XSTR(BPS)"*"#A"(%[temp16]) \n\t" \ -- "sb %["#TEMP12"], 3+"XSTR(BPS)"*"#A"(%[temp16]) \n\t" -+#define HORIZONTAL_PASS(A, TEMP0, TEMP4, TEMP8, TEMP12) \ -+ "addiu %[" #TEMP0 "], %[" #TEMP0 "], 4 \n\t" \ -+ "addu %[temp16], %[" #TEMP0 "], %[" #TEMP8 "] \n\t" \ -+ "subu %[temp17], %[" #TEMP0 "], %[" #TEMP8 "] \n\t" \ -+ "mul %[" #TEMP0 "], %[" #TEMP4 "], %[kC2] \n\t" \ -+ "mul %[" #TEMP8 "], %[" #TEMP12 "], %[kC1] \n\t" \ -+ "mul %[" #TEMP4 "], %[" #TEMP4 "], %[kC1] \n\t" \ -+ "mul %[" #TEMP12 "], %[" #TEMP12 "], %[kC2] \n\t" \ -+ "sra %[" #TEMP0 "], %[" #TEMP0 "], 16 \n\t" \ -+ "sra %[" #TEMP8 "], %[" #TEMP8 "], 16 \n\t" \ -+ "sra %[" #TEMP4 "], %[" #TEMP4 "], 16 \n\t" \ -+ "sra %[" #TEMP12 "], %[" #TEMP12 "], 16 \n\t" \ -+ "subu %[temp18], %[" #TEMP0 "], %[" #TEMP8 "] \n\t" \ -+ "addu %[temp19], %[" #TEMP4 "], %[" #TEMP12 "] \n\t" \ -+ "addu %[" #TEMP0 "], %[temp16], %[temp19] \n\t" \ -+ "addu %[" #TEMP4 "], %[temp17], %[temp18] \n\t" \ -+ "subu %[" #TEMP8 "], %[temp17], %[temp18] \n\t" \ -+ "subu %[" #TEMP12 "], %[temp16], %[temp19] \n\t" \ -+ "lw %[temp20], 0(%[args]) \n\t" \ -+ "sra %[" #TEMP0 "], %[" #TEMP0 "], 3 \n\t" \ -+ "sra %[" #TEMP4 "], %[" #TEMP4 "], 3 \n\t" \ -+ "sra %[" #TEMP8 "], %[" #TEMP8 "], 3 \n\t" \ -+ "sra %[" #TEMP12 "], %[" #TEMP12 "], 3 \n\t" \ -+ "lbu %[temp16], 0+"XSTR(BPS)"*" #A "(%[temp20]) \n\t" \ -+ "lbu %[temp17], 1+"XSTR(BPS)"*" #A "(%[temp20]) \n\t" \ -+ "lbu %[temp18], 2+"XSTR(BPS)"*" #A "(%[temp20]) \n\t" \ -+ "lbu %[temp19], 3+"XSTR(BPS)"*" #A "(%[temp20]) \n\t" \ -+ "addu %[" #TEMP0 "], %[temp16], %[" #TEMP0 "] \n\t" \ -+ "addu %[" #TEMP4 "], %[temp17], %[" #TEMP4 "] \n\t" \ -+ "addu %[" #TEMP8 "], %[temp18], %[" #TEMP8 "] \n\t" \ -+ "addu %[" #TEMP12 "], %[temp19], %[" #TEMP12 "] \n\t" \ -+ "slt %[temp16], %[" #TEMP0 "], $zero \n\t" \ -+ "slt %[temp17], %[" #TEMP4 "], $zero \n\t" \ -+ "slt %[temp18], %[" #TEMP8 "], $zero \n\t" \ -+ "slt %[temp19], %[" #TEMP12 "], $zero \n\t" \ -+ "movn %[" #TEMP0 "], $zero, %[temp16] \n\t" \ -+ "movn %[" #TEMP4 "], $zero, %[temp17] \n\t" \ -+ "movn %[" #TEMP8 "], $zero, %[temp18] \n\t" \ -+ "movn %[" #TEMP12 "], $zero, %[temp19] \n\t" \ -+ "addiu %[temp20], $zero, 255 \n\t" \ -+ "slt %[temp16], %[" #TEMP0 "], %[temp20] \n\t" \ -+ "slt %[temp17], %[" #TEMP4 "], %[temp20] \n\t" \ -+ "slt %[temp18], %[" #TEMP8 "], %[temp20] \n\t" \ -+ "slt %[temp19], %[" #TEMP12 "], %[temp20] \n\t" \ -+ "movz %[" #TEMP0 "], %[temp20], %[temp16] \n\t" \ -+ "movz %[" #TEMP4 "], %[temp20], %[temp17] \n\t" \ -+ "lw %[temp16], 8(%[args]) \n\t" \ -+ "movz %[" #TEMP8 "], %[temp20], %[temp18] \n\t" \ -+ "movz %[" #TEMP12 "], %[temp20], %[temp19] \n\t" \ -+ "sb %[" #TEMP0 "], 0+"XSTR(BPS)"*" #A "(%[temp16]) \n\t" \ -+ "sb %[" #TEMP4 "], 1+"XSTR(BPS)"*" #A "(%[temp16]) \n\t" \ -+ "sb %[" #TEMP8 "], 2+"XSTR(BPS)"*" #A "(%[temp16]) \n\t" \ -+ "sb %[" #TEMP12 "], 3+"XSTR(BPS)"*" #A "(%[temp16]) \n\t" - - // Does one or two inverse transforms. - static WEBP_INLINE void ITransformOne(const uint8_t* ref, const int16_t* in, -@@ -161,9 +161,9 @@ - // K - offset in bytes (kZigzag[n] * 4) - // N - offset in bytes (n * 2) - #define QUANTIZE_ONE(J, K, N) \ -- "lh %[temp0], "#J"(%[ppin]) \n\t" \ -- "lhu %[temp1], "#J"(%[ppsharpen]) \n\t" \ -- "lw %[temp2], "#K"(%[ppzthresh]) \n\t" \ -+ "lh %[temp0], " #J "(%[ppin]) \n\t" \ -+ "lhu %[temp1], " #J "(%[ppsharpen]) \n\t" \ -+ "lw %[temp2], " #K "(%[ppzthresh]) \n\t" \ - "sra %[sign], %[temp0], 15 \n\t" \ - "xor %[coeff], %[temp0], %[sign] \n\t" \ - "subu %[coeff], %[coeff], %[sign] \n\t" \ -@@ -172,9 +172,9 @@ - "addiu %[temp5], $zero, 0 \n\t" \ - "addiu %[level], $zero, 0 \n\t" \ - "beqz %[temp4], 2f \n\t" \ -- "lhu %[temp1], "#J"(%[ppiq]) \n\t" \ -- "lw %[temp2], "#K"(%[ppbias]) \n\t" \ -- "lhu %[temp3], "#J"(%[ppq]) \n\t" \ -+ "lhu %[temp1], " #J "(%[ppiq]) \n\t" \ -+ "lw %[temp2], " #K "(%[ppbias]) \n\t" \ -+ "lhu %[temp3], " #J "(%[ppq]) \n\t" \ - "mul %[level], %[coeff], %[temp1] \n\t" \ - "addu %[level], %[level], %[temp2] \n\t" \ - "sra %[level], %[level], 17 \n\t" \ -@@ -184,8 +184,8 @@ - "subu %[level], %[level], %[sign] \n\t" \ - "mul %[temp5], %[level], %[temp3] \n\t" \ - "2: \n\t" \ -- "sh %[temp5], "#J"(%[ppin]) \n\t" \ -- "sh %[level], "#N"(%[pout]) \n\t" -+ "sh %[temp5], " #J "(%[ppin]) \n\t" \ -+ "sh %[level], " #N "(%[pout]) \n\t" - - static int QuantizeBlock(int16_t in[16], int16_t out[16], - const VP8Matrix* const mtx) { -@@ -253,39 +253,39 @@ - // A - offset in bytes to load from a and b buffers - // E..H - offsets in bytes to store first results to tmp buffer - // E1..H1 - offsets in bytes to store second results to tmp buffer --#define HORIZONTAL_PASS(A, E, F, G, H, E1, F1, G1, H1) \ -- "lbu %[temp0], 0+"XSTR(BPS)"*"#A"(%[a]) \n\t" \ -- "lbu %[temp1], 1+"XSTR(BPS)"*"#A"(%[a]) \n\t" \ -- "lbu %[temp2], 2+"XSTR(BPS)"*"#A"(%[a]) \n\t" \ -- "lbu %[temp3], 3+"XSTR(BPS)"*"#A"(%[a]) \n\t" \ -- "lbu %[temp4], 0+"XSTR(BPS)"*"#A"(%[b]) \n\t" \ -- "lbu %[temp5], 1+"XSTR(BPS)"*"#A"(%[b]) \n\t" \ -- "lbu %[temp6], 2+"XSTR(BPS)"*"#A"(%[b]) \n\t" \ -- "lbu %[temp7], 3+"XSTR(BPS)"*"#A"(%[b]) \n\t" \ -- "addu %[temp8], %[temp0], %[temp2] \n\t" \ -- "subu %[temp0], %[temp0], %[temp2] \n\t" \ -- "addu %[temp2], %[temp1], %[temp3] \n\t" \ -- "subu %[temp1], %[temp1], %[temp3] \n\t" \ -- "addu %[temp3], %[temp4], %[temp6] \n\t" \ -- "subu %[temp4], %[temp4], %[temp6] \n\t" \ -- "addu %[temp6], %[temp5], %[temp7] \n\t" \ -- "subu %[temp5], %[temp5], %[temp7] \n\t" \ -- "addu %[temp7], %[temp8], %[temp2] \n\t" \ -- "subu %[temp2], %[temp8], %[temp2] \n\t" \ -- "addu %[temp8], %[temp0], %[temp1] \n\t" \ -- "subu %[temp0], %[temp0], %[temp1] \n\t" \ -- "addu %[temp1], %[temp3], %[temp6] \n\t" \ -- "subu %[temp3], %[temp3], %[temp6] \n\t" \ -- "addu %[temp6], %[temp4], %[temp5] \n\t" \ -- "subu %[temp4], %[temp4], %[temp5] \n\t" \ -- "sw %[temp7], "#E"(%[tmp]) \n\t" \ -- "sw %[temp2], "#H"(%[tmp]) \n\t" \ -- "sw %[temp8], "#F"(%[tmp]) \n\t" \ -- "sw %[temp0], "#G"(%[tmp]) \n\t" \ -- "sw %[temp1], "#E1"(%[tmp]) \n\t" \ -- "sw %[temp3], "#H1"(%[tmp]) \n\t" \ -- "sw %[temp6], "#F1"(%[tmp]) \n\t" \ -- "sw %[temp4], "#G1"(%[tmp]) \n\t" -+#define HORIZONTAL_PASS(A, E, F, G, H, E1, F1, G1, H1) \ -+ "lbu %[temp0], 0+"XSTR(BPS)"*" #A "(%[a]) \n\t" \ -+ "lbu %[temp1], 1+"XSTR(BPS)"*" #A "(%[a]) \n\t" \ -+ "lbu %[temp2], 2+"XSTR(BPS)"*" #A "(%[a]) \n\t" \ -+ "lbu %[temp3], 3+"XSTR(BPS)"*" #A "(%[a]) \n\t" \ -+ "lbu %[temp4], 0+"XSTR(BPS)"*" #A "(%[b]) \n\t" \ -+ "lbu %[temp5], 1+"XSTR(BPS)"*" #A "(%[b]) \n\t" \ -+ "lbu %[temp6], 2+"XSTR(BPS)"*" #A "(%[b]) \n\t" \ -+ "lbu %[temp7], 3+"XSTR(BPS)"*" #A "(%[b]) \n\t" \ -+ "addu %[temp8], %[temp0], %[temp2] \n\t" \ -+ "subu %[temp0], %[temp0], %[temp2] \n\t" \ -+ "addu %[temp2], %[temp1], %[temp3] \n\t" \ -+ "subu %[temp1], %[temp1], %[temp3] \n\t" \ -+ "addu %[temp3], %[temp4], %[temp6] \n\t" \ -+ "subu %[temp4], %[temp4], %[temp6] \n\t" \ -+ "addu %[temp6], %[temp5], %[temp7] \n\t" \ -+ "subu %[temp5], %[temp5], %[temp7] \n\t" \ -+ "addu %[temp7], %[temp8], %[temp2] \n\t" \ -+ "subu %[temp2], %[temp8], %[temp2] \n\t" \ -+ "addu %[temp8], %[temp0], %[temp1] \n\t" \ -+ "subu %[temp0], %[temp0], %[temp1] \n\t" \ -+ "addu %[temp1], %[temp3], %[temp6] \n\t" \ -+ "subu %[temp3], %[temp3], %[temp6] \n\t" \ -+ "addu %[temp6], %[temp4], %[temp5] \n\t" \ -+ "subu %[temp4], %[temp4], %[temp5] \n\t" \ -+ "sw %[temp7], " #E "(%[tmp]) \n\t" \ -+ "sw %[temp2], " #H "(%[tmp]) \n\t" \ -+ "sw %[temp8], " #F "(%[tmp]) \n\t" \ -+ "sw %[temp0], " #G "(%[tmp]) \n\t" \ -+ "sw %[temp1], " #E1 "(%[tmp]) \n\t" \ -+ "sw %[temp3], " #H1 "(%[tmp]) \n\t" \ -+ "sw %[temp6], " #F1 "(%[tmp]) \n\t" \ -+ "sw %[temp4], " #G1 "(%[tmp]) \n\t" - - // macro for one vertical pass in Disto4x4 (TTransform) - // two calls of function TTransform are merged into single one -@@ -300,10 +300,10 @@ - // A1..D1 - offsets in bytes to load second results from tmp buffer - // E..H - offsets in bytes to load from w buffer - #define VERTICAL_PASS(A, B, C, D, A1, B1, C1, D1, E, F, G, H) \ -- "lw %[temp0], "#A1"(%[tmp]) \n\t" \ -- "lw %[temp1], "#C1"(%[tmp]) \n\t" \ -- "lw %[temp2], "#B1"(%[tmp]) \n\t" \ -- "lw %[temp3], "#D1"(%[tmp]) \n\t" \ -+ "lw %[temp0], " #A1 "(%[tmp]) \n\t" \ -+ "lw %[temp1], " #C1 "(%[tmp]) \n\t" \ -+ "lw %[temp2], " #B1 "(%[tmp]) \n\t" \ -+ "lw %[temp3], " #D1 "(%[tmp]) \n\t" \ - "addu %[temp8], %[temp0], %[temp1] \n\t" \ - "subu %[temp0], %[temp0], %[temp1] \n\t" \ - "addu %[temp1], %[temp2], %[temp3] \n\t" \ -@@ -324,18 +324,18 @@ - "subu %[temp1], %[temp1], %[temp5] \n\t" \ - "subu %[temp0], %[temp0], %[temp6] \n\t" \ - "subu %[temp8], %[temp8], %[temp7] \n\t" \ -- "lhu %[temp4], "#E"(%[w]) \n\t" \ -- "lhu %[temp5], "#F"(%[w]) \n\t" \ -- "lhu %[temp6], "#G"(%[w]) \n\t" \ -- "lhu %[temp7], "#H"(%[w]) \n\t" \ -+ "lhu %[temp4], " #E "(%[w]) \n\t" \ -+ "lhu %[temp5], " #F "(%[w]) \n\t" \ -+ "lhu %[temp6], " #G "(%[w]) \n\t" \ -+ "lhu %[temp7], " #H "(%[w]) \n\t" \ - "madd %[temp4], %[temp3] \n\t" \ - "madd %[temp5], %[temp1] \n\t" \ - "madd %[temp6], %[temp0] \n\t" \ - "madd %[temp7], %[temp8] \n\t" \ -- "lw %[temp0], "#A"(%[tmp]) \n\t" \ -- "lw %[temp1], "#C"(%[tmp]) \n\t" \ -- "lw %[temp2], "#B"(%[tmp]) \n\t" \ -- "lw %[temp3], "#D"(%[tmp]) \n\t" \ -+ "lw %[temp0], " #A "(%[tmp]) \n\t" \ -+ "lw %[temp1], " #C "(%[tmp]) \n\t" \ -+ "lw %[temp2], " #B "(%[tmp]) \n\t" \ -+ "lw %[temp3], " #D "(%[tmp]) \n\t" \ - "addu %[temp8], %[temp0], %[temp1] \n\t" \ - "subu %[temp0], %[temp0], %[temp1] \n\t" \ - "addu %[temp1], %[temp2], %[temp3] \n\t" \ -@@ -412,71 +412,71 @@ - // temp0..temp15 holds tmp[0]..tmp[15] - // A - offset in bytes to load from src and ref buffers - // TEMP0..TEMP3 - registers for corresponding tmp elements --#define HORIZONTAL_PASS(A, TEMP0, TEMP1, TEMP2, TEMP3) \ -- "lw %["#TEMP1"], 0(%[args]) \n\t" \ -- "lw %["#TEMP2"], 4(%[args]) \n\t" \ -- "lbu %[temp16], 0+"XSTR(BPS)"*"#A"(%["#TEMP1"]) \n\t" \ -- "lbu %[temp17], 0+"XSTR(BPS)"*"#A"(%["#TEMP2"]) \n\t" \ -- "lbu %[temp18], 1+"XSTR(BPS)"*"#A"(%["#TEMP1"]) \n\t" \ -- "lbu %[temp19], 1+"XSTR(BPS)"*"#A"(%["#TEMP2"]) \n\t" \ -- "subu %[temp20], %[temp16], %[temp17] \n\t" \ -- "lbu %[temp16], 2+"XSTR(BPS)"*"#A"(%["#TEMP1"]) \n\t" \ -- "lbu %[temp17], 2+"XSTR(BPS)"*"#A"(%["#TEMP2"]) \n\t" \ -- "subu %["#TEMP0"], %[temp18], %[temp19] \n\t" \ -- "lbu %[temp18], 3+"XSTR(BPS)"*"#A"(%["#TEMP1"]) \n\t" \ -- "lbu %[temp19], 3+"XSTR(BPS)"*"#A"(%["#TEMP2"]) \n\t" \ -- "subu %["#TEMP1"], %[temp16], %[temp17] \n\t" \ -- "subu %["#TEMP2"], %[temp18], %[temp19] \n\t" \ -- "addu %["#TEMP3"], %[temp20], %["#TEMP2"] \n\t" \ -- "subu %["#TEMP2"], %[temp20], %["#TEMP2"] \n\t" \ -- "addu %[temp20], %["#TEMP0"], %["#TEMP1"] \n\t" \ -- "subu %["#TEMP0"], %["#TEMP0"], %["#TEMP1"] \n\t" \ -- "mul %[temp16], %["#TEMP2"], %[c5352] \n\t" \ -- "mul %[temp17], %["#TEMP2"], %[c2217] \n\t" \ -- "mul %[temp18], %["#TEMP0"], %[c5352] \n\t" \ -- "mul %[temp19], %["#TEMP0"], %[c2217] \n\t" \ -- "addu %["#TEMP1"], %["#TEMP3"], %[temp20] \n\t" \ -- "subu %[temp20], %["#TEMP3"], %[temp20] \n\t" \ -- "sll %["#TEMP0"], %["#TEMP1"], 3 \n\t" \ -- "sll %["#TEMP2"], %[temp20], 3 \n\t" \ -- "addiu %[temp16], %[temp16], 1812 \n\t" \ -- "addiu %[temp17], %[temp17], 937 \n\t" \ -- "addu %[temp16], %[temp16], %[temp19] \n\t" \ -- "subu %[temp17], %[temp17], %[temp18] \n\t" \ -- "sra %["#TEMP1"], %[temp16], 9 \n\t" \ -- "sra %["#TEMP3"], %[temp17], 9 \n\t" -+#define HORIZONTAL_PASS(A, TEMP0, TEMP1, TEMP2, TEMP3) \ -+ "lw %[" #TEMP1 "], 0(%[args]) \n\t" \ -+ "lw %[" #TEMP2 "], 4(%[args]) \n\t" \ -+ "lbu %[temp16], 0+"XSTR(BPS)"*" #A "(%[" #TEMP1 "]) \n\t" \ -+ "lbu %[temp17], 0+"XSTR(BPS)"*" #A "(%[" #TEMP2 "]) \n\t" \ -+ "lbu %[temp18], 1+"XSTR(BPS)"*" #A "(%[" #TEMP1 "]) \n\t" \ -+ "lbu %[temp19], 1+"XSTR(BPS)"*" #A "(%[" #TEMP2 "]) \n\t" \ -+ "subu %[temp20], %[temp16], %[temp17] \n\t" \ -+ "lbu %[temp16], 2+"XSTR(BPS)"*" #A "(%[" #TEMP1 "]) \n\t" \ -+ "lbu %[temp17], 2+"XSTR(BPS)"*" #A "(%[" #TEMP2 "]) \n\t" \ -+ "subu %[" #TEMP0 "], %[temp18], %[temp19] \n\t" \ -+ "lbu %[temp18], 3+"XSTR(BPS)"*" #A "(%[" #TEMP1 "]) \n\t" \ -+ "lbu %[temp19], 3+"XSTR(BPS)"*" #A "(%[" #TEMP2 "]) \n\t" \ -+ "subu %[" #TEMP1 "], %[temp16], %[temp17] \n\t" \ -+ "subu %[" #TEMP2 "], %[temp18], %[temp19] \n\t" \ -+ "addu %[" #TEMP3 "], %[temp20], %[" #TEMP2 "] \n\t" \ -+ "subu %[" #TEMP2 "], %[temp20], %[" #TEMP2 "] \n\t" \ -+ "addu %[temp20], %[" #TEMP0 "], %[" #TEMP1 "] \n\t" \ -+ "subu %[" #TEMP0 "], %[" #TEMP0 "], %[" #TEMP1 "] \n\t" \ -+ "mul %[temp16], %[" #TEMP2 "], %[c5352] \n\t" \ -+ "mul %[temp17], %[" #TEMP2 "], %[c2217] \n\t" \ -+ "mul %[temp18], %[" #TEMP0 "], %[c5352] \n\t" \ -+ "mul %[temp19], %[" #TEMP0 "], %[c2217] \n\t" \ -+ "addu %[" #TEMP1 "], %[" #TEMP3 "], %[temp20] \n\t" \ -+ "subu %[temp20], %[" #TEMP3 "], %[temp20] \n\t" \ -+ "sll %[" #TEMP0 "], %[" #TEMP1 "], 3 \n\t" \ -+ "sll %[" #TEMP2 "], %[temp20], 3 \n\t" \ -+ "addiu %[temp16], %[temp16], 1812 \n\t" \ -+ "addiu %[temp17], %[temp17], 937 \n\t" \ -+ "addu %[temp16], %[temp16], %[temp19] \n\t" \ -+ "subu %[temp17], %[temp17], %[temp18] \n\t" \ -+ "sra %[" #TEMP1 "], %[temp16], 9 \n\t" \ -+ "sra %[" #TEMP3 "], %[temp17], 9 \n\t" - - // macro for one vertical pass in FTransform - // temp0..temp15 holds tmp[0]..tmp[15] - // A..D - offsets in bytes to store to out buffer - // TEMP0, TEMP4, TEMP8 and TEMP12 - registers for corresponding tmp elements --#define VERTICAL_PASS(A, B, C, D, TEMP0, TEMP4, TEMP8, TEMP12) \ -- "addu %[temp16], %["#TEMP0"], %["#TEMP12"] \n\t" \ -- "subu %[temp19], %["#TEMP0"], %["#TEMP12"] \n\t" \ -- "addu %[temp17], %["#TEMP4"], %["#TEMP8"] \n\t" \ -- "subu %[temp18], %["#TEMP4"], %["#TEMP8"] \n\t" \ -- "mul %["#TEMP8"], %[temp19], %[c2217] \n\t" \ -- "mul %["#TEMP12"], %[temp18], %[c2217] \n\t" \ -- "mul %["#TEMP4"], %[temp19], %[c5352] \n\t" \ -- "mul %[temp18], %[temp18], %[c5352] \n\t" \ -- "addiu %[temp16], %[temp16], 7 \n\t" \ -- "addu %["#TEMP0"], %[temp16], %[temp17] \n\t" \ -- "sra %["#TEMP0"], %["#TEMP0"], 4 \n\t" \ -- "addu %["#TEMP12"], %["#TEMP12"], %["#TEMP4"] \n\t" \ -- "subu %["#TEMP4"], %[temp16], %[temp17] \n\t" \ -- "sra %["#TEMP4"], %["#TEMP4"], 4 \n\t" \ -- "addiu %["#TEMP8"], %["#TEMP8"], 30000 \n\t" \ -- "addiu %["#TEMP12"], %["#TEMP12"], 12000 \n\t" \ -- "addiu %["#TEMP8"], %["#TEMP8"], 21000 \n\t" \ -- "subu %["#TEMP8"], %["#TEMP8"], %[temp18] \n\t" \ -- "sra %["#TEMP12"], %["#TEMP12"], 16 \n\t" \ -- "sra %["#TEMP8"], %["#TEMP8"], 16 \n\t" \ -- "addiu %[temp16], %["#TEMP12"], 1 \n\t" \ -- "movn %["#TEMP12"], %[temp16], %[temp19] \n\t" \ -- "sh %["#TEMP0"], "#A"(%[temp20]) \n\t" \ -- "sh %["#TEMP4"], "#C"(%[temp20]) \n\t" \ -- "sh %["#TEMP8"], "#D"(%[temp20]) \n\t" \ -- "sh %["#TEMP12"], "#B"(%[temp20]) \n\t" -+#define VERTICAL_PASS(A, B, C, D, TEMP0, TEMP4, TEMP8, TEMP12) \ -+ "addu %[temp16], %[" #TEMP0 "], %[" #TEMP12 "] \n\t" \ -+ "subu %[temp19], %[" #TEMP0 "], %[" #TEMP12 "] \n\t" \ -+ "addu %[temp17], %[" #TEMP4 "], %[" #TEMP8 "] \n\t" \ -+ "subu %[temp18], %[" #TEMP4 "], %[" #TEMP8 "] \n\t" \ -+ "mul %[" #TEMP8 "], %[temp19], %[c2217] \n\t" \ -+ "mul %[" #TEMP12 "], %[temp18], %[c2217] \n\t" \ -+ "mul %[" #TEMP4 "], %[temp19], %[c5352] \n\t" \ -+ "mul %[temp18], %[temp18], %[c5352] \n\t" \ -+ "addiu %[temp16], %[temp16], 7 \n\t" \ -+ "addu %[" #TEMP0 "], %[temp16], %[temp17] \n\t" \ -+ "sra %[" #TEMP0 "], %[" #TEMP0 "], 4 \n\t" \ -+ "addu %[" #TEMP12 "], %[" #TEMP12 "], %[" #TEMP4 "] \n\t" \ -+ "subu %[" #TEMP4 "], %[temp16], %[temp17] \n\t" \ -+ "sra %[" #TEMP4 "], %[" #TEMP4 "], 4 \n\t" \ -+ "addiu %[" #TEMP8 "], %[" #TEMP8 "], 30000 \n\t" \ -+ "addiu %[" #TEMP12 "], %[" #TEMP12 "], 12000 \n\t" \ -+ "addiu %[" #TEMP8 "], %[" #TEMP8 "], 21000 \n\t" \ -+ "subu %[" #TEMP8 "], %[" #TEMP8 "], %[temp18] \n\t" \ -+ "sra %[" #TEMP12 "], %[" #TEMP12 "], 16 \n\t" \ -+ "sra %[" #TEMP8 "], %[" #TEMP8 "], 16 \n\t" \ -+ "addiu %[temp16], %[" #TEMP12 "], 1 \n\t" \ -+ "movn %[" #TEMP12 "], %[temp16], %[temp19] \n\t" \ -+ "sh %[" #TEMP0 "], " #A "(%[temp20]) \n\t" \ -+ "sh %[" #TEMP4 "], " #C "(%[temp20]) \n\t" \ -+ "sh %[" #TEMP8 "], " #D "(%[temp20]) \n\t" \ -+ "sh %[" #TEMP12 "], " #B "(%[temp20]) \n\t" - - static void FTransform(const uint8_t* src, const uint8_t* ref, int16_t* out) { - int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8; -@@ -516,14 +516,14 @@ - #if !defined(WORK_AROUND_GCC) - - #define GET_SSE_INNER(A, B, C, D) \ -- "lbu %[temp0], "#A"(%[a]) \n\t" \ -- "lbu %[temp1], "#A"(%[b]) \n\t" \ -- "lbu %[temp2], "#B"(%[a]) \n\t" \ -- "lbu %[temp3], "#B"(%[b]) \n\t" \ -- "lbu %[temp4], "#C"(%[a]) \n\t" \ -- "lbu %[temp5], "#C"(%[b]) \n\t" \ -- "lbu %[temp6], "#D"(%[a]) \n\t" \ -- "lbu %[temp7], "#D"(%[b]) \n\t" \ -+ "lbu %[temp0], " #A "(%[a]) \n\t" \ -+ "lbu %[temp1], " #A "(%[b]) \n\t" \ -+ "lbu %[temp2], " #B "(%[a]) \n\t" \ -+ "lbu %[temp3], " #B "(%[b]) \n\t" \ -+ "lbu %[temp4], " #C "(%[a]) \n\t" \ -+ "lbu %[temp5], " #C "(%[b]) \n\t" \ -+ "lbu %[temp6], " #D "(%[a]) \n\t" \ -+ "lbu %[temp7], " #D "(%[b]) \n\t" \ - "subu %[temp0], %[temp0], %[temp1] \n\t" \ - "subu %[temp2], %[temp2], %[temp3] \n\t" \ - "subu %[temp4], %[temp4], %[temp5] \n\t" \ -diff --git a/Source/LibWebP/src/dsp/dsp.enc_mips_dsp_r2.c b/Source/LibWebP/src/dsp/dsp.enc_mips_dsp_r2.c -index 56db07c..44f6fd2 100644 ---- a/Source/LibWebP/src/dsp/dsp.enc_mips_dsp_r2.c -+++ b/Source/LibWebP/src/dsp/dsp.enc_mips_dsp_r2.c -@@ -27,25 +27,25 @@ - // I - input (macro doesn't change it) - #define ADD_SUB_HALVES_X4(O0, O1, O2, O3, O4, O5, O6, O7, \ - I0, I1, I2, I3, I4, I5, I6, I7) \ -- "addq.ph %["#O0"], %["#I0"], %["#I1"] \n\t" \ -- "subq.ph %["#O1"], %["#I0"], %["#I1"] \n\t" \ -- "addq.ph %["#O2"], %["#I2"], %["#I3"] \n\t" \ -- "subq.ph %["#O3"], %["#I2"], %["#I3"] \n\t" \ -- "addq.ph %["#O4"], %["#I4"], %["#I5"] \n\t" \ -- "subq.ph %["#O5"], %["#I4"], %["#I5"] \n\t" \ -- "addq.ph %["#O6"], %["#I6"], %["#I7"] \n\t" \ -- "subq.ph %["#O7"], %["#I6"], %["#I7"] \n\t" -+ "addq.ph %[" #O0 "], %[" #I0 "], %[" #I1 "] \n\t" \ -+ "subq.ph %[" #O1 "], %[" #I0 "], %[" #I1 "] \n\t" \ -+ "addq.ph %[" #O2 "], %[" #I2 "], %[" #I3 "] \n\t" \ -+ "subq.ph %[" #O3 "], %[" #I2 "], %[" #I3 "] \n\t" \ -+ "addq.ph %[" #O4 "], %[" #I4 "], %[" #I5 "] \n\t" \ -+ "subq.ph %[" #O5 "], %[" #I4 "], %[" #I5 "] \n\t" \ -+ "addq.ph %[" #O6 "], %[" #I6 "], %[" #I7 "] \n\t" \ -+ "subq.ph %[" #O7 "], %[" #I6 "], %[" #I7 "] \n\t" - - // IO - input/output - #define ABS_X8(IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7) \ -- "absq_s.ph %["#IO0"], %["#IO0"] \n\t" \ -- "absq_s.ph %["#IO1"], %["#IO1"] \n\t" \ -- "absq_s.ph %["#IO2"], %["#IO2"] \n\t" \ -- "absq_s.ph %["#IO3"], %["#IO3"] \n\t" \ -- "absq_s.ph %["#IO4"], %["#IO4"] \n\t" \ -- "absq_s.ph %["#IO5"], %["#IO5"] \n\t" \ -- "absq_s.ph %["#IO6"], %["#IO6"] \n\t" \ -- "absq_s.ph %["#IO7"], %["#IO7"] \n\t" -+ "absq_s.ph %[" #IO0 "], %[" #IO0 "] \n\t" \ -+ "absq_s.ph %[" #IO1 "], %[" #IO1 "] \n\t" \ -+ "absq_s.ph %[" #IO2 "], %[" #IO2 "] \n\t" \ -+ "absq_s.ph %[" #IO3 "], %[" #IO3 "] \n\t" \ -+ "absq_s.ph %[" #IO4 "], %[" #IO4 "] \n\t" \ -+ "absq_s.ph %[" #IO5 "], %[" #IO5 "] \n\t" \ -+ "absq_s.ph %[" #IO6 "], %[" #IO6 "] \n\t" \ -+ "absq_s.ph %[" #IO7 "], %[" #IO7 "] \n\t" - - // dpa.w.ph $ac0 temp0 ,temp1 - // $ac += temp0[31..16] * temp1[31..16] + temp0[15..0] * temp1[15..0] -@@ -56,15 +56,15 @@ - #define MUL_HALF(O0, I0, I1, I2, I3, I4, I5, I6, I7, \ - I8, I9, I10, I11, I12, I13, I14, I15) \ - "mult $ac0, $zero, $zero \n\t" \ -- "dpa.w.ph $ac0, %["#I2"], %["#I0"] \n\t" \ -- "dpax.w.ph $ac0, %["#I5"], %["#I6"] \n\t" \ -- "dpa.w.ph $ac0, %["#I8"], %["#I9"] \n\t" \ -- "dpax.w.ph $ac0, %["#I11"], %["#I4"] \n\t" \ -- "dpa.w.ph $ac0, %["#I12"], %["#I7"] \n\t" \ -- "dpax.w.ph $ac0, %["#I13"], %["#I1"] \n\t" \ -- "dpa.w.ph $ac0, %["#I14"], %["#I3"] \n\t" \ -- "dpax.w.ph $ac0, %["#I15"], %["#I10"] \n\t" \ -- "mflo %["#O0"], $ac0 \n\t" -+ "dpa.w.ph $ac0, %[" #I2 "], %[" #I0 "] \n\t" \ -+ "dpax.w.ph $ac0, %[" #I5 "], %[" #I6 "] \n\t" \ -+ "dpa.w.ph $ac0, %[" #I8 "], %[" #I9 "] \n\t" \ -+ "dpax.w.ph $ac0, %[" #I11 "], %[" #I4 "] \n\t" \ -+ "dpa.w.ph $ac0, %[" #I12 "], %[" #I7 "] \n\t" \ -+ "dpax.w.ph $ac0, %[" #I13 "], %[" #I1 "] \n\t" \ -+ "dpa.w.ph $ac0, %[" #I14 "], %[" #I3 "] \n\t" \ -+ "dpax.w.ph $ac0, %[" #I15 "], %[" #I10 "] \n\t" \ -+ "mflo %[" #O0 "], $ac0 \n\t" - - #define OUTPUT_EARLY_CLOBBER_REGS_17() \ - OUTPUT_EARLY_CLOBBER_REGS_10(), \ -@@ -77,69 +77,69 @@ - // A - offset in bytes to load from src and ref buffers - // TEMP0..TEMP3 - registers for corresponding tmp elements - #define HORIZONTAL_PASS(A, TEMP0, TEMP1, TEMP2, TEMP3) \ -- "lw %["#TEMP0"], 0(%[args]) \n\t" \ -- "lw %["#TEMP1"], 4(%[args]) \n\t" \ -- "lw %["#TEMP2"], "XSTR(BPS)"*"#A"(%["#TEMP0"]) \n\t" \ -- "lw %["#TEMP3"], "XSTR(BPS)"*"#A"(%["#TEMP1"]) \n\t" \ -- "preceu.ph.qbl %["#TEMP0"], %["#TEMP2"] \n\t" \ -- "preceu.ph.qbl %["#TEMP1"], %["#TEMP3"] \n\t" \ -- "preceu.ph.qbr %["#TEMP2"], %["#TEMP2"] \n\t" \ -- "preceu.ph.qbr %["#TEMP3"], %["#TEMP3"] \n\t" \ -- "subq.ph %["#TEMP0"], %["#TEMP0"], %["#TEMP1"] \n\t" \ -- "subq.ph %["#TEMP2"], %["#TEMP2"], %["#TEMP3"] \n\t" \ -- "rotr %["#TEMP0"], %["#TEMP0"], 16 \n\t" \ -- "addq.ph %["#TEMP1"], %["#TEMP2"], %["#TEMP0"] \n\t" \ -- "subq.ph %["#TEMP3"], %["#TEMP2"], %["#TEMP0"] \n\t" \ -- "seh %["#TEMP0"], %["#TEMP1"] \n\t" \ -- "sra %[temp16], %["#TEMP1"], 16 \n\t" \ -- "seh %[temp19], %["#TEMP3"] \n\t" \ -- "sra %["#TEMP3"], %["#TEMP3"], 16 \n\t" \ -- "subu %["#TEMP2"], %["#TEMP0"], %[temp16] \n\t" \ -- "addu %["#TEMP0"], %["#TEMP0"], %[temp16] \n\t" \ -- "mul %[temp17], %[temp19], %[c2217] \n\t" \ -- "mul %[temp18], %["#TEMP3"], %[c5352] \n\t" \ -- "mul %["#TEMP1"], %[temp19], %[c5352] \n\t" \ -- "mul %[temp16], %["#TEMP3"], %[c2217] \n\t" \ -- "sll %["#TEMP2"], %["#TEMP2"], 3 \n\t" \ -- "sll %["#TEMP0"], %["#TEMP0"], 3 \n\t" \ -- "subu %["#TEMP3"], %[temp17], %[temp18] \n\t" \ -- "addu %["#TEMP1"], %[temp16], %["#TEMP1"] \n\t" \ -- "addiu %["#TEMP3"], %["#TEMP3"], 937 \n\t" \ -- "addiu %["#TEMP1"], %["#TEMP1"], 1812 \n\t" \ -- "sra %["#TEMP3"], %["#TEMP3"], 9 \n\t" \ -- "sra %["#TEMP1"], %["#TEMP1"], 9 \n\t" -+ "lw %[" #TEMP0 "], 0(%[args]) \n\t" \ -+ "lw %[" #TEMP1 "], 4(%[args]) \n\t" \ -+ "lw %[" #TEMP2 "], "XSTR(BPS)"*" #A "(%[" #TEMP0 "]) \n\t" \ -+ "lw %[" #TEMP3 "], "XSTR(BPS)"*" #A "(%[" #TEMP1 "]) \n\t" \ -+ "preceu.ph.qbl %[" #TEMP0 "], %[" #TEMP2 "] \n\t" \ -+ "preceu.ph.qbl %[" #TEMP1 "], %[" #TEMP3 "] \n\t" \ -+ "preceu.ph.qbr %[" #TEMP2 "], %[" #TEMP2 "] \n\t" \ -+ "preceu.ph.qbr %[" #TEMP3 "], %[" #TEMP3 "] \n\t" \ -+ "subq.ph %[" #TEMP0 "], %[" #TEMP0 "], %[" #TEMP1 "] \n\t" \ -+ "subq.ph %[" #TEMP2 "], %[" #TEMP2 "], %[" #TEMP3 "] \n\t" \ -+ "rotr %[" #TEMP0 "], %[" #TEMP0 "], 16 \n\t" \ -+ "addq.ph %[" #TEMP1 "], %[" #TEMP2 "], %[" #TEMP0 "] \n\t" \ -+ "subq.ph %[" #TEMP3 "], %[" #TEMP2 "], %[" #TEMP0 "] \n\t" \ -+ "seh %[" #TEMP0 "], %[" #TEMP1 "] \n\t" \ -+ "sra %[temp16], %[" #TEMP1 "], 16 \n\t" \ -+ "seh %[temp19], %[" #TEMP3 "] \n\t" \ -+ "sra %[" #TEMP3 "], %[" #TEMP3 "], 16 \n\t" \ -+ "subu %[" #TEMP2 "], %[" #TEMP0 "], %[temp16] \n\t" \ -+ "addu %[" #TEMP0 "], %[" #TEMP0 "], %[temp16] \n\t" \ -+ "mul %[temp17], %[temp19], %[c2217] \n\t" \ -+ "mul %[temp18], %[" #TEMP3 "], %[c5352] \n\t" \ -+ "mul %[" #TEMP1 "], %[temp19], %[c5352] \n\t" \ -+ "mul %[temp16], %[" #TEMP3 "], %[c2217] \n\t" \ -+ "sll %[" #TEMP2 "], %[" #TEMP2 "], 3 \n\t" \ -+ "sll %[" #TEMP0 "], %[" #TEMP0 "], 3 \n\t" \ -+ "subu %[" #TEMP3 "], %[temp17], %[temp18] \n\t" \ -+ "addu %[" #TEMP1 "], %[temp16], %[" #TEMP1 "] \n\t" \ -+ "addiu %[" #TEMP3 "], %[" #TEMP3 "], 937 \n\t" \ -+ "addiu %[" #TEMP1 "], %[" #TEMP1 "], 1812 \n\t" \ -+ "sra %[" #TEMP3 "], %[" #TEMP3 "], 9 \n\t" \ -+ "sra %[" #TEMP1 "], %[" #TEMP1 "], 9 \n\t" - - // macro for one vertical pass in FTransform - // temp0..temp15 holds tmp[0]..tmp[15] - // A..D - offsets in bytes to store to out buffer - // TEMP0, TEMP4, TEMP8 and TEMP12 - registers for corresponding tmp elements - #define VERTICAL_PASS(A, B, C, D, TEMP0, TEMP4, TEMP8, TEMP12) \ -- "addu %[temp16], %["#TEMP0"], %["#TEMP12"] \n\t" \ -- "subu %[temp19], %["#TEMP0"], %["#TEMP12"] \n\t" \ -- "addu %[temp17], %["#TEMP4"], %["#TEMP8"] \n\t" \ -- "subu %[temp18], %["#TEMP4"], %["#TEMP8"] \n\t" \ -- "mul %["#TEMP8"], %[temp19], %[c2217] \n\t" \ -- "mul %["#TEMP12"], %[temp18], %[c2217] \n\t" \ -- "mul %["#TEMP4"], %[temp19], %[c5352] \n\t" \ -- "mul %[temp18], %[temp18], %[c5352] \n\t" \ -- "addiu %[temp16], %[temp16], 7 \n\t" \ -- "addu %["#TEMP0"], %[temp16], %[temp17] \n\t" \ -- "sra %["#TEMP0"], %["#TEMP0"], 4 \n\t" \ -- "addu %["#TEMP12"], %["#TEMP12"], %["#TEMP4"] \n\t" \ -- "subu %["#TEMP4"], %[temp16], %[temp17] \n\t" \ -- "sra %["#TEMP4"], %["#TEMP4"], 4 \n\t" \ -- "addiu %["#TEMP8"], %["#TEMP8"], 30000 \n\t" \ -- "addiu %["#TEMP12"], %["#TEMP12"], 12000 \n\t" \ -- "addiu %["#TEMP8"], %["#TEMP8"], 21000 \n\t" \ -- "subu %["#TEMP8"], %["#TEMP8"], %[temp18] \n\t" \ -- "sra %["#TEMP12"], %["#TEMP12"], 16 \n\t" \ -- "sra %["#TEMP8"], %["#TEMP8"], 16 \n\t" \ -- "addiu %[temp16], %["#TEMP12"], 1 \n\t" \ -- "movn %["#TEMP12"], %[temp16], %[temp19] \n\t" \ -- "sh %["#TEMP0"], "#A"(%[temp20]) \n\t" \ -- "sh %["#TEMP4"], "#C"(%[temp20]) \n\t" \ -- "sh %["#TEMP8"], "#D"(%[temp20]) \n\t" \ -- "sh %["#TEMP12"], "#B"(%[temp20]) \n\t" -+ "addu %[temp16], %[" #TEMP0 "], %[" #TEMP12 "] \n\t" \ -+ "subu %[temp19], %[" #TEMP0 "], %[" #TEMP12 "] \n\t" \ -+ "addu %[temp17], %[" #TEMP4 "], %[" #TEMP8 "] \n\t" \ -+ "subu %[temp18], %[" #TEMP4 "], %[" #TEMP8 "] \n\t" \ -+ "mul %[" #TEMP8 "], %[temp19], %[c2217] \n\t" \ -+ "mul %[" #TEMP12 "], %[temp18], %[c2217] \n\t" \ -+ "mul %[" #TEMP4 "], %[temp19], %[c5352] \n\t" \ -+ "mul %[temp18], %[temp18], %[c5352] \n\t" \ -+ "addiu %[temp16], %[temp16], 7 \n\t" \ -+ "addu %[" #TEMP0 "], %[temp16], %[temp17] \n\t" \ -+ "sra %[" #TEMP0 "], %[" #TEMP0 "], 4 \n\t" \ -+ "addu %[" #TEMP12 "], %[" #TEMP12 "], %[" #TEMP4 "] \n\t" \ -+ "subu %[" #TEMP4 "], %[temp16], %[temp17] \n\t" \ -+ "sra %[" #TEMP4 "], %[" #TEMP4 "], 4 \n\t" \ -+ "addiu %[" #TEMP8 "], %[" #TEMP8 "], 30000 \n\t" \ -+ "addiu %[" #TEMP12 "], %[" #TEMP12 "], 12000 \n\t" \ -+ "addiu %[" #TEMP8 "], %[" #TEMP8 "], 21000 \n\t" \ -+ "subu %[" #TEMP8 "], %[" #TEMP8 "], %[temp18] \n\t" \ -+ "sra %[" #TEMP12 "], %[" #TEMP12 "], 16 \n\t" \ -+ "sra %[" #TEMP8 "], %[" #TEMP8 "], 16 \n\t" \ -+ "addiu %[temp16], %[" #TEMP12 "], 1 \n\t" \ -+ "movn %[" #TEMP12 "], %[temp16], %[temp19] \n\t" \ -+ "sh %[" #TEMP0 "], " #A "(%[temp20]) \n\t" \ -+ "sh %[" #TEMP4 "], " #C "(%[temp20]) \n\t" \ -+ "sh %[" #TEMP8 "], " #D "(%[temp20]) \n\t" \ -+ "sh %[" #TEMP12 "], " #B "(%[temp20]) \n\t" - - static void FTransform(const uint8_t* src, const uint8_t* ref, int16_t* out) { - const int c2217 = 2217; -@@ -329,11 +329,11 @@ - // Intra predictions - - #define FILL_PART(J, SIZE) \ -- "usw %[value], 0+"#J"*"XSTR(BPS)"(%[dst]) \n\t" \ -- "usw %[value], 4+"#J"*"XSTR(BPS)"(%[dst]) \n\t" \ -- ".if "#SIZE" == 16 \n\t" \ -- "usw %[value], 8+"#J"*"XSTR(BPS)"(%[dst]) \n\t" \ -- "usw %[value], 12+"#J"*"XSTR(BPS)"(%[dst]) \n\t" \ -+ "usw %[value], 0+" #J "*"XSTR(BPS)"(%[dst]) \n\t" \ -+ "usw %[value], 4+" #J "*"XSTR(BPS)"(%[dst]) \n\t" \ -+ ".if " #SIZE " == 16 \n\t" \ -+ "usw %[value], 8+" #J "*"XSTR(BPS)"(%[dst]) \n\t" \ -+ "usw %[value], 12+" #J "*"XSTR(BPS)"(%[dst]) \n\t" \ - ".endif \n\t" - - #define FILL_8_OR_16(DST, VALUE, SIZE) do { \ -@@ -348,7 +348,7 @@ - FILL_PART( 5, SIZE) \ - FILL_PART( 6, SIZE) \ - FILL_PART( 7, SIZE) \ -- ".if "#SIZE" == 16 \n\t" \ -+ ".if " #SIZE " == 16 \n\t" \ - FILL_PART( 8, 16) \ - FILL_PART( 9, 16) \ - FILL_PART(10, 16) \ -@@ -425,7 +425,7 @@ - CLIPPING() \ - "usw %[temp0], 0(%[dst]) \n\t" \ - "usw %[temp1], 4(%[dst]) \n\t" \ -- ".if "#SIZE" == 16 \n\t" \ -+ ".if " #SIZE " == 16 \n\t" \ - "ulw %[temp0], 8(%[top]) \n\t" \ - "ulw %[temp1], 12(%[top]) \n\t" \ - CLIPPING() \ -@@ -1060,8 +1060,8 @@ - #if !defined(WORK_AROUND_GCC) - - #define GET_SSE_INNER(A) \ -- "lw %[temp0], "#A"(%[a]) \n\t" \ -- "lw %[temp1], "#A"(%[b]) \n\t" \ -+ "lw %[temp0], " #A "(%[a]) \n\t" \ -+ "lw %[temp1], " #A "(%[b]) \n\t" \ - "preceu.ph.qbr %[temp2], %[temp0] \n\t" \ - "preceu.ph.qbl %[temp0], %[temp0] \n\t" \ - "preceu.ph.qbr %[temp3], %[temp1] \n\t" \ -@@ -1185,28 +1185,28 @@ - // N - offset in bytes (n * 2) - // N1 - offset in bytes ((n + 1) * 2) - #define QUANTIZE_ONE(J, K, N, N1) \ -- "ulw %[temp1], "#J"(%[ppin]) \n\t" \ -- "ulw %[temp2], "#J"(%[ppsharpen]) \n\t" \ -- "lhu %[temp3], "#K"(%[ppzthresh]) \n\t" \ -- "lhu %[temp6], "#K"+4(%[ppzthresh]) \n\t" \ -+ "ulw %[temp1], " #J "(%[ppin]) \n\t" \ -+ "ulw %[temp2], " #J "(%[ppsharpen]) \n\t" \ -+ "lhu %[temp3], " #K "(%[ppzthresh]) \n\t" \ -+ "lhu %[temp6], " #K "+4(%[ppzthresh]) \n\t" \ - "absq_s.ph %[temp4], %[temp1] \n\t" \ - "ins %[temp3], %[temp6], 16, 16 \n\t" \ - "addu.ph %[coeff], %[temp4], %[temp2] \n\t" \ - "shra.ph %[sign], %[temp1], 15 \n\t" \ - "li %[level], 0x10001 \n\t" \ - "cmp.lt.ph %[temp3], %[coeff] \n\t" \ -- "lhu %[temp1], "#J"(%[ppiq]) \n\t" \ -+ "lhu %[temp1], " #J "(%[ppiq]) \n\t" \ - "pick.ph %[temp5], %[level], $0 \n\t" \ -- "lw %[temp2], "#K"(%[ppbias]) \n\t" \ -+ "lw %[temp2], " #K "(%[ppbias]) \n\t" \ - "beqz %[temp5], 0f \n\t" \ -- "lhu %[temp3], "#J"(%[ppq]) \n\t" \ -+ "lhu %[temp3], " #J "(%[ppq]) \n\t" \ - "beq %[temp5], %[level], 1f \n\t" \ - "andi %[temp5], %[temp5], 0x1 \n\t" \ - "andi %[temp4], %[coeff], 0xffff \n\t" \ - "beqz %[temp5], 2f \n\t" \ - "mul %[level], %[temp4], %[temp1] \n\t" \ -- "sh $0, "#J"+2(%[ppin]) \n\t" \ -- "sh $0, "#N1"(%[pout]) \n\t" \ -+ "sh $0, " #J "+2(%[ppin]) \n\t" \ -+ "sh $0, " #N1 "(%[pout]) \n\t" \ - "addu %[level], %[level], %[temp2] \n\t" \ - "sra %[level], %[level], 17 \n\t" \ - "slt %[temp4], %[max_level], %[level] \n\t" \ -@@ -1216,15 +1216,15 @@ - "subu %[level], %[level], %[temp6] \n\t" \ - "mul %[temp5], %[level], %[temp3] \n\t" \ - "or %[ret], %[ret], %[level] \n\t" \ -- "sh %[level], "#N"(%[pout]) \n\t" \ -- "sh %[temp5], "#J"(%[ppin]) \n\t" \ -+ "sh %[level], " #N "(%[pout]) \n\t" \ -+ "sh %[temp5], " #J "(%[ppin]) \n\t" \ - "j 3f \n\t" \ - "2: \n\t" \ -- "lhu %[temp1], "#J"+2(%[ppiq]) \n\t" \ -+ "lhu %[temp1], " #J "+2(%[ppiq]) \n\t" \ - "srl %[temp5], %[coeff], 16 \n\t" \ - "mul %[level], %[temp5], %[temp1] \n\t" \ -- "lw %[temp2], "#K"+4(%[ppbias]) \n\t" \ -- "lhu %[temp3], "#J"+2(%[ppq]) \n\t" \ -+ "lw %[temp2], " #K "+4(%[ppbias]) \n\t" \ -+ "lhu %[temp3], " #J "+2(%[ppq]) \n\t" \ - "addu %[level], %[level], %[temp2] \n\t" \ - "sra %[level], %[level], 17 \n\t" \ - "srl %[temp6], %[sign], 16 \n\t" \ -@@ -1233,20 +1233,20 @@ - "xor %[level], %[level], %[temp6] \n\t" \ - "subu %[level], %[level], %[temp6] \n\t" \ - "mul %[temp5], %[level], %[temp3] \n\t" \ -- "sh $0, "#J"(%[ppin]) \n\t" \ -- "sh $0, "#N"(%[pout]) \n\t" \ -+ "sh $0, " #J "(%[ppin]) \n\t" \ -+ "sh $0, " #N "(%[pout]) \n\t" \ - "or %[ret], %[ret], %[level] \n\t" \ -- "sh %[temp5], "#J"+2(%[ppin]) \n\t" \ -- "sh %[level], "#N1"(%[pout]) \n\t" \ -+ "sh %[temp5], " #J "+2(%[ppin]) \n\t" \ -+ "sh %[level], " #N1 "(%[pout]) \n\t" \ - "j 3f \n\t" \ - "1: \n\t" \ -- "lhu %[temp1], "#J"(%[ppiq]) \n\t" \ -- "lw %[temp2], "#K"(%[ppbias]) \n\t" \ -- "ulw %[temp3], "#J"(%[ppq]) \n\t" \ -+ "lhu %[temp1], " #J "(%[ppiq]) \n\t" \ -+ "lw %[temp2], " #K "(%[ppbias]) \n\t" \ -+ "ulw %[temp3], " #J "(%[ppq]) \n\t" \ - "andi %[temp5], %[coeff], 0xffff \n\t" \ - "srl %[temp0], %[coeff], 16 \n\t" \ -- "lhu %[temp6], "#J"+2(%[ppiq]) \n\t" \ -- "lw %[coeff], "#K"+4(%[ppbias]) \n\t" \ -+ "lhu %[temp6], " #J "+2(%[ppiq]) \n\t" \ -+ "lw %[coeff], " #K "+4(%[ppbias]) \n\t" \ - "mul %[level], %[temp5], %[temp1] \n\t" \ - "mul %[temp4], %[temp0], %[temp6] \n\t" \ - "addu %[level], %[level], %[temp2] \n\t" \ -@@ -1259,15 +1259,15 @@ - "subu.ph %[level], %[level], %[sign] \n\t" \ - "mul.ph %[temp3], %[level], %[temp3] \n\t" \ - "or %[ret], %[ret], %[level] \n\t" \ -- "sh %[level], "#N"(%[pout]) \n\t" \ -+ "sh %[level], " #N "(%[pout]) \n\t" \ - "srl %[level], %[level], 16 \n\t" \ -- "sh %[level], "#N1"(%[pout]) \n\t" \ -- "usw %[temp3], "#J"(%[ppin]) \n\t" \ -+ "sh %[level], " #N1 "(%[pout]) \n\t" \ -+ "usw %[temp3], " #J "(%[ppin]) \n\t" \ - "j 3f \n\t" \ - "0: \n\t" \ -- "sh $0, "#N"(%[pout]) \n\t" \ -- "sh $0, "#N1"(%[pout]) \n\t" \ -- "usw $0, "#J"(%[ppin]) \n\t" \ -+ "sh $0, " #N "(%[pout]) \n\t" \ -+ "sh $0, " #N1 "(%[pout]) \n\t" \ -+ "usw $0, " #J "(%[ppin]) \n\t" \ - "3: \n\t" - - static int QuantizeBlock(int16_t in[16], int16_t out[16], -@@ -1326,37 +1326,37 @@ - // A, B, C, D - offset in bytes to load from in buffer - // TEMP0, TEMP1 - registers for corresponding tmp elements - #define HORIZONTAL_PASS_WHT(A, B, C, D, TEMP0, TEMP1) \ -- "lh %["#TEMP0"], "#A"(%[in]) \n\t" \ -- "lh %["#TEMP1"], "#B"(%[in]) \n\t" \ -- "lh %[temp8], "#C"(%[in]) \n\t" \ -- "lh %[temp9], "#D"(%[in]) \n\t" \ -- "ins %["#TEMP1"], %["#TEMP0"], 16, 16 \n\t" \ -+ "lh %[" #TEMP0 "], " #A "(%[in]) \n\t" \ -+ "lh %[" #TEMP1 "], " #B "(%[in]) \n\t" \ -+ "lh %[temp8], " #C "(%[in]) \n\t" \ -+ "lh %[temp9], " #D "(%[in]) \n\t" \ -+ "ins %[" #TEMP1 "], %[" #TEMP0 "], 16, 16 \n\t" \ - "ins %[temp9], %[temp8], 16, 16 \n\t" \ -- "subq.ph %[temp8], %["#TEMP1"], %[temp9] \n\t" \ -- "addq.ph %[temp9], %["#TEMP1"], %[temp9] \n\t" \ -- "precrq.ph.w %["#TEMP0"], %[temp8], %[temp9] \n\t" \ -+ "subq.ph %[temp8], %[" #TEMP1 "], %[temp9] \n\t" \ -+ "addq.ph %[temp9], %[" #TEMP1 "], %[temp9] \n\t" \ -+ "precrq.ph.w %[" #TEMP0 "], %[temp8], %[temp9] \n\t" \ - "append %[temp8], %[temp9], 16 \n\t" \ -- "subq.ph %["#TEMP1"], %["#TEMP0"], %[temp8] \n\t" \ -- "addq.ph %["#TEMP0"], %["#TEMP0"], %[temp8] \n\t" \ -- "rotr %["#TEMP1"], %["#TEMP1"], 16 \n\t" -+ "subq.ph %[" #TEMP1 "], %[" #TEMP0 "], %[temp8] \n\t" \ -+ "addq.ph %[" #TEMP0 "], %[" #TEMP0 "], %[temp8] \n\t" \ -+ "rotr %[" #TEMP1 "], %[" #TEMP1 "], 16 \n\t" - - // macro for one vertical pass in FTransformWHT - // temp0..temp7 holds tmp[0]..tmp[15] - // A, B, C, D - offsets in bytes to store to out buffer - // TEMP0, TEMP2, TEMP4 and TEMP6 - registers for corresponding tmp elements - #define VERTICAL_PASS_WHT(A, B, C, D, TEMP0, TEMP2, TEMP4, TEMP6) \ -- "addq.ph %[temp8], %["#TEMP0"], %["#TEMP4"] \n\t" \ -- "addq.ph %[temp9], %["#TEMP2"], %["#TEMP6"] \n\t" \ -- "subq.ph %["#TEMP2"], %["#TEMP2"], %["#TEMP6"] \n\t" \ -- "subq.ph %["#TEMP6"], %["#TEMP0"], %["#TEMP4"] \n\t" \ -- "addqh.ph %["#TEMP0"], %[temp8], %[temp9] \n\t" \ -- "subqh.ph %["#TEMP4"], %["#TEMP6"], %["#TEMP2"] \n\t" \ -- "addqh.ph %["#TEMP2"], %["#TEMP2"], %["#TEMP6"] \n\t" \ -- "subqh.ph %["#TEMP6"], %[temp8], %[temp9] \n\t" \ -- "usw %["#TEMP0"], "#A"(%[out]) \n\t" \ -- "usw %["#TEMP2"], "#B"(%[out]) \n\t" \ -- "usw %["#TEMP4"], "#C"(%[out]) \n\t" \ -- "usw %["#TEMP6"], "#D"(%[out]) \n\t" -+ "addq.ph %[temp8], %[" #TEMP0 "], %[" #TEMP4 "] \n\t" \ -+ "addq.ph %[temp9], %[" #TEMP2 "], %[" #TEMP6 "] \n\t" \ -+ "subq.ph %[" #TEMP2 "], %[" #TEMP2 "], %[" #TEMP6 "] \n\t" \ -+ "subq.ph %[" #TEMP6 "], %[" #TEMP0 "], %[" #TEMP4 "] \n\t" \ -+ "addqh.ph %[" #TEMP0 "], %[temp8], %[temp9] \n\t" \ -+ "subqh.ph %[" #TEMP4 "], %[" #TEMP6 "], %[" #TEMP2 "] \n\t" \ -+ "addqh.ph %[" #TEMP2 "], %[" #TEMP2 "], %[" #TEMP6 "] \n\t" \ -+ "subqh.ph %[" #TEMP6 "], %[temp8], %[temp9] \n\t" \ -+ "usw %[" #TEMP0 "], " #A "(%[out]) \n\t" \ -+ "usw %[" #TEMP2 "], " #B "(%[out]) \n\t" \ -+ "usw %[" #TEMP4 "], " #C "(%[out]) \n\t" \ -+ "usw %[" #TEMP6 "], " #D "(%[out]) \n\t" - - static void FTransformWHT(const int16_t* in, int16_t* out) { - int temp0, temp1, temp2, temp3, temp4; -@@ -1385,10 +1385,10 @@ - // convert 8 coeffs at time - // A, B, C, D - offsets in bytes to load from out buffer - #define CONVERT_COEFFS_TO_BIN(A, B, C, D) \ -- "ulw %[temp0], "#A"(%[out]) \n\t" \ -- "ulw %[temp1], "#B"(%[out]) \n\t" \ -- "ulw %[temp2], "#C"(%[out]) \n\t" \ -- "ulw %[temp3], "#D"(%[out]) \n\t" \ -+ "ulw %[temp0], " #A "(%[out]) \n\t" \ -+ "ulw %[temp1], " #B "(%[out]) \n\t" \ -+ "ulw %[temp2], " #C "(%[out]) \n\t" \ -+ "ulw %[temp3], " #D "(%[out]) \n\t" \ - "absq_s.ph %[temp0], %[temp0] \n\t" \ - "absq_s.ph %[temp1], %[temp1] \n\t" \ - "absq_s.ph %[temp2], %[temp2] \n\t" \ -diff --git a/Source/LibWebP/src/dsp/dsp.filters_mips_dsp_r2.c b/Source/LibWebP/src/dsp/dsp.filters_mips_dsp_r2.c -index 66f807d..8134af5 100644 ---- a/Source/LibWebP/src/dsp/dsp.filters_mips_dsp_r2.c -+++ b/Source/LibWebP/src/dsp/dsp.filters_mips_dsp_r2.c -@@ -48,7 +48,7 @@ - "srl %[temp0], %[length], 0x2 \n\t" \ - "beqz %[temp0], 4f \n\t" \ - " andi %[temp6], %[length], 0x3 \n\t" \ -- ".if "#INVERSE" \n\t" \ -+ ".if " #INVERSE " \n\t" \ - "lbu %[temp1], -1(%[src]) \n\t" \ - "1: \n\t" \ - "lbu %[temp2], 0(%[src]) \n\t" \ -@@ -84,7 +84,7 @@ - "lbu %[temp1], -1(%[src]) \n\t" \ - "lbu %[temp2], 0(%[src]) \n\t" \ - "addiu %[src], %[src], 1 \n\t" \ -- ".if "#INVERSE" \n\t" \ -+ ".if " #INVERSE " \n\t" \ - "addu %[temp3], %[temp1], %[temp2] \n\t" \ - "sb %[temp3], -1(%[src]) \n\t" \ - ".else \n\t" \ -@@ -131,7 +131,7 @@ - "ulw %[temp3], 4(%[src]) \n\t" \ - "ulw %[temp4], 4(%[pred]) \n\t" \ - "addiu %[src], %[src], 8 \n\t" \ -- ".if "#INVERSE" \n\t" \ -+ ".if " #INVERSE " \n\t" \ - "addu.qb %[temp5], %[temp1], %[temp2] \n\t" \ - "addu.qb %[temp6], %[temp3], %[temp4] \n\t" \ - ".else \n\t" \ -@@ -152,7 +152,7 @@ - "lbu %[temp2], 0(%[pred]) \n\t" \ - "addiu %[src], %[src], 1 \n\t" \ - "addiu %[pred], %[pred], 1 \n\t" \ -- ".if "#INVERSE" \n\t" \ -+ ".if " #INVERSE " \n\t" \ - "addu %[temp3], %[temp1], %[temp2] \n\t" \ - ".else \n\t" \ - "subu %[temp3], %[temp1], %[temp2] \n\t" \ -@@ -177,7 +177,7 @@ - __asm__ volatile ( \ - "lbu %[temp1], 0(%[src]) \n\t" \ - "lbu %[temp2], 0(%[pred]) \n\t" \ -- ".if "#INVERSE" \n\t" \ -+ ".if " #INVERSE " \n\t" \ - "addu %[temp3], %[temp1], %[temp2] \n\t" \ - ".else \n\t" \ - "subu %[temp3], %[temp1], %[temp2] \n\t" \ -diff --git a/Source/LibWebP/src/dsp/dsp.lossless_mips32.c b/Source/LibWebP/src/dsp/dsp.lossless_mips32.c -index 8ae5958..cdf0e26 100644 ---- a/Source/LibWebP/src/dsp/dsp.lossless_mips32.c -+++ b/Source/LibWebP/src/dsp/dsp.lossless_mips32.c - -@@ -278,28 +278,28 @@ - // literal_ and successive histograms could be unaligned - // so we must use ulw and usw - #define ADD_TO_OUT(A, B, C, D, E, P0, P1, P2) \ -- "ulw %[temp0], "#A"(%["#P0"]) \n\t" \ -- "ulw %[temp1], "#B"(%["#P0"]) \n\t" \ -- "ulw %[temp2], "#C"(%["#P0"]) \n\t" \ -- "ulw %[temp3], "#D"(%["#P0"]) \n\t" \ -- "ulw %[temp4], "#A"(%["#P1"]) \n\t" \ -- "ulw %[temp5], "#B"(%["#P1"]) \n\t" \ -- "ulw %[temp6], "#C"(%["#P1"]) \n\t" \ -- "ulw %[temp7], "#D"(%["#P1"]) \n\t" \ -+ "ulw %[temp0], " #A "(%[" #P0 "]) \n\t" \ -+ "ulw %[temp1], " #B "(%[" #P0 "]) \n\t" \ -+ "ulw %[temp2], " #C "(%[" #P0 "]) \n\t" \ -+ "ulw %[temp3], " #D "(%[" #P0 "]) \n\t" \ -+ "ulw %[temp4], " #A "(%[" #P1 "]) \n\t" \ -+ "ulw %[temp5], " #B "(%[" #P1 "]) \n\t" \ -+ "ulw %[temp6], " #C "(%[" #P1 "]) \n\t" \ -+ "ulw %[temp7], " #D "(%[" #P1 "]) \n\t" \ - "addu %[temp4], %[temp4], %[temp0] \n\t" \ - "addu %[temp5], %[temp5], %[temp1] \n\t" \ - "addu %[temp6], %[temp6], %[temp2] \n\t" \ - "addu %[temp7], %[temp7], %[temp3] \n\t" \ -- "addiu %["#P0"], %["#P0"], 16 \n\t" \ -- ".if "#E" == 1 \n\t" \ -- "addiu %["#P1"], %["#P1"], 16 \n\t" \ -+ "addiu %[" #P0 "], %[" #P0 "], 16 \n\t" \ -+ ".if " #E " == 1 \n\t" \ -+ "addiu %[" #P1 "], %[" #P1 "], 16 \n\t" \ - ".endif \n\t" \ -- "usw %[temp4], "#A"(%["#P2"]) \n\t" \ -- "usw %[temp5], "#B"(%["#P2"]) \n\t" \ -- "usw %[temp6], "#C"(%["#P2"]) \n\t" \ -- "usw %[temp7], "#D"(%["#P2"]) \n\t" \ -- "addiu %["#P2"], %["#P2"], 16 \n\t" \ -- "bne %["#P0"], %[LoopEnd], 1b \n\t" \ -+ "usw %[temp4], " #A "(%[" #P2 "]) \n\t" \ -+ "usw %[temp5], " #B "(%[" #P2 "]) \n\t" \ -+ "usw %[temp6], " #C "(%[" #P2 "]) \n\t" \ -+ "usw %[temp7], " #D "(%[" #P2 "]) \n\t" \ -+ "addiu %[" #P2 "], %[" #P2 "], 16 \n\t" \ -+ "bne %[" #P0 "], %[LoopEnd], 1b \n\t" \ - ".set pop \n\t" \ - - #define ASM_END_COMMON_0 \ -diff --git a/Source/LibWebP/src/dsp/dsp.lossless_mips_dsp_r2.c b/Source/LibWebP/src/dsp/dsp.lossless_mips_dsp_r2.c -index ad55f2c..90aed7f 100644 ---- a/Source/LibWebP/src/dsp/dsp.lossless_mips_dsp_r2.c -+++ b/Source/LibWebP/src/dsp/dsp.lossless_mips_dsp_r2.c -@@ -29,14 +29,14 @@ - for (x = 0; x < (width >> 2); ++x) { \ - int tmp1, tmp2, tmp3, tmp4; \ - __asm__ volatile ( \ -- ".ifc "#TYPE", uint8_t \n\t" \ -+ ".ifc " #TYPE ", uint8_t \n\t" \ - "lbu %[tmp1], 0(%[src]) \n\t" \ - "lbu %[tmp2], 1(%[src]) \n\t" \ - "lbu %[tmp3], 2(%[src]) \n\t" \ - "lbu %[tmp4], 3(%[src]) \n\t" \ - "addiu %[src], %[src], 4 \n\t" \ - ".endif \n\t" \ -- ".ifc "#TYPE", uint32_t \n\t" \ -+ ".ifc " #TYPE ", uint32_t \n\t" \ - "lw %[tmp1], 0(%[src]) \n\t" \ - "lw %[tmp2], 4(%[src]) \n\t" \ - "lw %[tmp3], 8(%[src]) \n\t" \ -@@ -55,7 +55,7 @@ - "lwx %[tmp2], %[tmp2](%[color_map]) \n\t" \ - "lwx %[tmp3], %[tmp3](%[color_map]) \n\t" \ - "lwx %[tmp4], %[tmp4](%[color_map]) \n\t" \ -- ".ifc "#TYPE", uint8_t \n\t" \ -+ ".ifc " #TYPE ", uint8_t \n\t" \ - "ext %[tmp1], %[tmp1], 8, 8 \n\t" \ - "ext %[tmp2], %[tmp2], 8, 8 \n\t" \ - "ext %[tmp3], %[tmp3], 8, 8 \n\t" \ -@@ -66,7 +66,7 @@ - "sb %[tmp4], 3(%[dst]) \n\t" \ - "addiu %[dst], %[dst], 4 \n\t" \ - ".endif \n\t" \ -- ".ifc "#TYPE", uint32_t \n\t" \ -+ ".ifc " #TYPE ", uint32_t \n\t" \ - "sw %[tmp1], 0(%[dst]) \n\t" \ - "sw %[tmp2], 4(%[dst]) \n\t" \ - "sw %[tmp3], 8(%[dst]) \n\t" \ -diff --git a/Source/LibWebP/src/dsp/mips_macro.h b/Source/LibWebP/src/dsp/mips_macro.h -index 4cfb23c..e09d2c4 100644 ---- a/Source/LibWebP/src/dsp/mips_macro.h -+++ b/Source/LibWebP/src/dsp/mips_macro.h -@@ -25,25 +25,25 @@ - // I - input (macro doesn't change it) - #define ADD_SUB_HALVES(O0, O1, \ - I0, I1) \ -- "addq.ph %["#O0"], %["#I0"], %["#I1"] \n\t" \ -- "subq.ph %["#O1"], %["#I0"], %["#I1"] \n\t" -+ "addq.ph %[" #O0 "], %[" #I0 "], %[" #I1 "] \n\t" \ -+ "subq.ph %[" #O1 "], %[" #I0 "], %[" #I1 "] \n\t" - - // O - output - // I - input (macro doesn't change it) - // I[0/1] - offset in bytes - #define LOAD_IN_X2(O0, O1, \ - I0, I1) \ -- "lh %["#O0"], "#I0"(%[in]) \n\t" \ -- "lh %["#O1"], "#I1"(%[in]) \n\t" -+ "lh %[" #O0 "], " #I0 "(%[in]) \n\t" \ -+ "lh %[" #O1 "], " #I1 "(%[in]) \n\t" - - // I0 - location - // I1..I9 - offsets in bytes - #define LOAD_WITH_OFFSET_X4(O0, O1, O2, O3, \ - I0, I1, I2, I3, I4, I5, I6, I7, I8, I9) \ -- "ulw %["#O0"], "#I1"+"XSTR(I9)"*"#I5"(%["#I0"]) \n\t" \ -- "ulw %["#O1"], "#I2"+"XSTR(I9)"*"#I6"(%["#I0"]) \n\t" \ -- "ulw %["#O2"], "#I3"+"XSTR(I9)"*"#I7"(%["#I0"]) \n\t" \ -- "ulw %["#O3"], "#I4"+"XSTR(I9)"*"#I8"(%["#I0"]) \n\t" -+ "ulw %[" #O0 "], " #I1 "+"XSTR(I9)"*" #I5 "(%[" #I0 "]) \n\t" \ -+ "ulw %[" #O1 "], " #I2 "+"XSTR(I9)"*" #I6 "(%[" #I0 "]) \n\t" \ -+ "ulw %[" #O2 "], " #I3 "+"XSTR(I9)"*" #I7 "(%[" #I0 "]) \n\t" \ -+ "ulw %[" #O3 "], " #I4 "+"XSTR(I9)"*" #I8 "(%[" #I0 "]) \n\t" - - // O - output - // IO - input/output -@@ -51,42 +51,42 @@ - #define MUL_SHIFT_SUM(O0, O1, O2, O3, O4, O5, O6, O7, \ - IO0, IO1, IO2, IO3, \ - I0, I1, I2, I3, I4, I5, I6, I7) \ -- "mul %["#O0"], %["#I0"], %[kC2] \n\t" \ -- "mul %["#O1"], %["#I0"], %[kC1] \n\t" \ -- "mul %["#O2"], %["#I1"], %[kC2] \n\t" \ -- "mul %["#O3"], %["#I1"], %[kC1] \n\t" \ -- "mul %["#O4"], %["#I2"], %[kC2] \n\t" \ -- "mul %["#O5"], %["#I2"], %[kC1] \n\t" \ -- "mul %["#O6"], %["#I3"], %[kC2] \n\t" \ -- "mul %["#O7"], %["#I3"], %[kC1] \n\t" \ -- "sra %["#O0"], %["#O0"], 16 \n\t" \ -- "sra %["#O1"], %["#O1"], 16 \n\t" \ -- "sra %["#O2"], %["#O2"], 16 \n\t" \ -- "sra %["#O3"], %["#O3"], 16 \n\t" \ -- "sra %["#O4"], %["#O4"], 16 \n\t" \ -- "sra %["#O5"], %["#O5"], 16 \n\t" \ -- "sra %["#O6"], %["#O6"], 16 \n\t" \ -- "sra %["#O7"], %["#O7"], 16 \n\t" \ -- "addu %["#IO0"], %["#IO0"], %["#I4"] \n\t" \ -- "addu %["#IO1"], %["#IO1"], %["#I5"] \n\t" \ -- "subu %["#IO2"], %["#IO2"], %["#I6"] \n\t" \ -- "subu %["#IO3"], %["#IO3"], %["#I7"] \n\t" -+ "mul %[" #O0 "], %[" #I0 "], %[kC2] \n\t" \ -+ "mul %[" #O1 "], %[" #I0 "], %[kC1] \n\t" \ -+ "mul %[" #O2 "], %[" #I1 "], %[kC2] \n\t" \ -+ "mul %[" #O3 "], %[" #I1 "], %[kC1] \n\t" \ -+ "mul %[" #O4 "], %[" #I2 "], %[kC2] \n\t" \ -+ "mul %[" #O5 "], %[" #I2 "], %[kC1] \n\t" \ -+ "mul %[" #O6 "], %[" #I3 "], %[kC2] \n\t" \ -+ "mul %[" #O7 "], %[" #I3 "], %[kC1] \n\t" \ -+ "sra %[" #O0 "], %[" #O0 "], 16 \n\t" \ -+ "sra %[" #O1 "], %[" #O1 "], 16 \n\t" \ -+ "sra %[" #O2 "], %[" #O2 "], 16 \n\t" \ -+ "sra %[" #O3 "], %[" #O3 "], 16 \n\t" \ -+ "sra %[" #O4 "], %[" #O4 "], 16 \n\t" \ -+ "sra %[" #O5 "], %[" #O5 "], 16 \n\t" \ -+ "sra %[" #O6 "], %[" #O6 "], 16 \n\t" \ -+ "sra %[" #O7 "], %[" #O7 "], 16 \n\t" \ -+ "addu %[" #IO0 "], %[" #IO0 "], %[" #I4 "] \n\t" \ -+ "addu %[" #IO1 "], %[" #IO1 "], %[" #I5 "] \n\t" \ -+ "subu %[" #IO2 "], %[" #IO2 "], %[" #I6 "] \n\t" \ -+ "subu %[" #IO3 "], %[" #IO3 "], %[" #I7 "] \n\t" - - // O - output - // I - input (macro doesn't change it) - #define INSERT_HALF_X2(O0, O1, \ - I0, I1) \ -- "ins %["#O0"], %["#I0"], 16, 16 \n\t" \ -- "ins %["#O1"], %["#I1"], 16, 16 \n\t" -+ "ins %[" #O0 "], %[" #I0 "], 16, 16 \n\t" \ -+ "ins %[" #O1 "], %[" #I1 "], 16, 16 \n\t" - - // O - output - // I - input (macro doesn't change it) - #define SRA_16(O0, O1, O2, O3, \ - I0, I1, I2, I3) \ -- "sra %["#O0"], %["#I0"], 16 \n\t" \ -- "sra %["#O1"], %["#I1"], 16 \n\t" \ -- "sra %["#O2"], %["#I2"], 16 \n\t" \ -- "sra %["#O3"], %["#I3"], 16 \n\t" -+ "sra %[" #O0 "], %[" #I0 "], 16 \n\t" \ -+ "sra %[" #O1 "], %[" #I1 "], 16 \n\t" \ -+ "sra %[" #O2 "], %[" #I2 "], 16 \n\t" \ -+ "sra %[" #O3 "], %[" #I3 "], 16 \n\t" - - // temp0[31..16 | 15..0] = temp8[31..16 | 15..0] + temp12[31..16 | 15..0] - // temp1[31..16 | 15..0] = temp8[31..16 | 15..0] - temp12[31..16 | 15..0] -@@ -96,22 +96,22 @@ - // I - input (macro doesn't change it) - #define SHIFT_R_SUM_X2(O0, O1, O2, O3, O4, O5, O6, O7, \ - I0, I1, I2, I3, I4, I5, I6, I7) \ -- "addq.ph %["#O0"], %["#I0"], %["#I4"] \n\t" \ -- "subq.ph %["#O1"], %["#I0"], %["#I4"] \n\t" \ -- "addq.ph %["#O2"], %["#I1"], %["#I5"] \n\t" \ -- "subq.ph %["#O3"], %["#I1"], %["#I5"] \n\t" \ -- "addq.ph %["#O4"], %["#I2"], %["#I6"] \n\t" \ -- "subq.ph %["#O5"], %["#I2"], %["#I6"] \n\t" \ -- "addq.ph %["#O6"], %["#I3"], %["#I7"] \n\t" \ -- "subq.ph %["#O7"], %["#I3"], %["#I7"] \n\t" \ -- "shra.ph %["#O0"], %["#O0"], 3 \n\t" \ -- "shra.ph %["#O1"], %["#O1"], 3 \n\t" \ -- "shra.ph %["#O2"], %["#O2"], 3 \n\t" \ -- "shra.ph %["#O3"], %["#O3"], 3 \n\t" \ -- "shra.ph %["#O4"], %["#O4"], 3 \n\t" \ -- "shra.ph %["#O5"], %["#O5"], 3 \n\t" \ -- "shra.ph %["#O6"], %["#O6"], 3 \n\t" \ -- "shra.ph %["#O7"], %["#O7"], 3 \n\t" -+ "addq.ph %[" #O0 "], %[" #I0 "], %[" #I4 "] \n\t" \ -+ "subq.ph %[" #O1 "], %[" #I0 "], %[" #I4 "] \n\t" \ -+ "addq.ph %[" #O2 "], %[" #I1 "], %[" #I5 "] \n\t" \ -+ "subq.ph %[" #O3 "], %[" #I1 "], %[" #I5 "] \n\t" \ -+ "addq.ph %[" #O4 "], %[" #I2 "], %[" #I6 "] \n\t" \ -+ "subq.ph %[" #O5 "], %[" #I2 "], %[" #I6 "] \n\t" \ -+ "addq.ph %[" #O6 "], %[" #I3 "], %[" #I7 "] \n\t" \ -+ "subq.ph %[" #O7 "], %[" #I3 "], %[" #I7 "] \n\t" \ -+ "shra.ph %[" #O0 "], %[" #O0 "], 3 \n\t" \ -+ "shra.ph %[" #O1 "], %[" #O1 "], 3 \n\t" \ -+ "shra.ph %[" #O2 "], %[" #O2 "], 3 \n\t" \ -+ "shra.ph %[" #O3 "], %[" #O3 "], 3 \n\t" \ -+ "shra.ph %[" #O4 "], %[" #O4 "], 3 \n\t" \ -+ "shra.ph %[" #O5 "], %[" #O5 "], 3 \n\t" \ -+ "shra.ph %[" #O6 "], %[" #O6 "], 3 \n\t" \ -+ "shra.ph %[" #O7 "], %[" #O7 "], 3 \n\t" - - // precrq.ph.w temp0, temp8, temp2 - // temp0 = temp8[31..16] | temp2[31..16] -@@ -123,14 +123,14 @@ - #define PACK_2_HALVES_TO_WORD(O0, O1, O2, O3, \ - IO0, IO1, IO2, IO3, \ - I0, I1, I2, I3) \ -- "precrq.ph.w %["#O0"], %["#I0"], %["#IO0"] \n\t" \ -- "precrq.ph.w %["#O1"], %["#I1"], %["#IO1"] \n\t" \ -- "ins %["#IO0"], %["#I0"], 16, 16 \n\t" \ -- "ins %["#IO1"], %["#I1"], 16, 16 \n\t" \ -- "precrq.ph.w %["#O2"], %["#I2"], %["#IO2"] \n\t" \ -- "precrq.ph.w %["#O3"], %["#I3"], %["#IO3"] \n\t" \ -- "ins %["#IO2"], %["#I2"], 16, 16 \n\t" \ -- "ins %["#IO3"], %["#I3"], 16, 16 \n\t" -+ "precrq.ph.w %[" #O0 "], %[" #I0 "], %[" #IO0 "] \n\t" \ -+ "precrq.ph.w %[" #O1 "], %[" #I1 "], %[" #IO1 "] \n\t" \ -+ "ins %[" #IO0 "], %[" #I0 "], 16, 16 \n\t" \ -+ "ins %[" #IO1 "], %[" #I1 "], 16, 16 \n\t" \ -+ "precrq.ph.w %[" #O2 "], %[" #I2 "], %[" #IO2 "] \n\t" \ -+ "precrq.ph.w %[" #O3 "], %[" #I3 "], %[" #IO3 "] \n\t" \ -+ "ins %[" #IO2 "], %[" #I2 "], 16, 16 \n\t" \ -+ "ins %[" #IO3 "], %[" #I3 "], 16, 16 \n\t" - - // preceu.ph.qbr temp0, temp8 - // temp0 = 0 | 0 | temp8[23..16] | temp8[7..0] -@@ -140,14 +140,14 @@ - // I - input (macro doesn't change it) - #define CONVERT_2_BYTES_TO_HALF(O0, O1, O2, O3, O4, O5, O6, O7, \ - I0, I1, I2, I3) \ -- "preceu.ph.qbr %["#O0"], %["#I0"] \n\t" \ -- "preceu.ph.qbl %["#O1"], %["#I0"] \n\t" \ -- "preceu.ph.qbr %["#O2"], %["#I1"] \n\t" \ -- "preceu.ph.qbl %["#O3"], %["#I1"] \n\t" \ -- "preceu.ph.qbr %["#O4"], %["#I2"] \n\t" \ -- "preceu.ph.qbl %["#O5"], %["#I2"] \n\t" \ -- "preceu.ph.qbr %["#O6"], %["#I3"] \n\t" \ -- "preceu.ph.qbl %["#O7"], %["#I3"] \n\t" -+ "preceu.ph.qbr %[" #O0 "], %[" #I0 "] \n\t" \ -+ "preceu.ph.qbl %[" #O1 "], %[" #I0 "] \n\t" \ -+ "preceu.ph.qbr %[" #O2 "], %[" #I1 "] \n\t" \ -+ "preceu.ph.qbl %[" #O3 "], %[" #I1 "] \n\t" \ -+ "preceu.ph.qbr %[" #O4 "], %[" #I2 "] \n\t" \ -+ "preceu.ph.qbl %[" #O5 "], %[" #I2 "] \n\t" \ -+ "preceu.ph.qbr %[" #O6 "], %[" #I3 "] \n\t" \ -+ "preceu.ph.qbl %[" #O7 "], %[" #I3 "] \n\t" - - // temp0[31..16 | 15..0] = temp0[31..16 | 15..0] + temp8[31..16 | 15..0] - // temp0[31..16 | 15..0] = temp0[31..16 <<(s) 7 | 15..0 <<(s) 7] -@@ -160,30 +160,30 @@ - #define STORE_SAT_SUM_X2(IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7, \ - I0, I1, I2, I3, I4, I5, I6, I7, \ - I8, I9, I10, I11, I12, I13) \ -- "addq.ph %["#IO0"], %["#IO0"], %["#I0"] \n\t" \ -- "addq.ph %["#IO1"], %["#IO1"], %["#I1"] \n\t" \ -- "addq.ph %["#IO2"], %["#IO2"], %["#I2"] \n\t" \ -- "addq.ph %["#IO3"], %["#IO3"], %["#I3"] \n\t" \ -- "addq.ph %["#IO4"], %["#IO4"], %["#I4"] \n\t" \ -- "addq.ph %["#IO5"], %["#IO5"], %["#I5"] \n\t" \ -- "addq.ph %["#IO6"], %["#IO6"], %["#I6"] \n\t" \ -- "addq.ph %["#IO7"], %["#IO7"], %["#I7"] \n\t" \ -- "shll_s.ph %["#IO0"], %["#IO0"], 7 \n\t" \ -- "shll_s.ph %["#IO1"], %["#IO1"], 7 \n\t" \ -- "shll_s.ph %["#IO2"], %["#IO2"], 7 \n\t" \ -- "shll_s.ph %["#IO3"], %["#IO3"], 7 \n\t" \ -- "shll_s.ph %["#IO4"], %["#IO4"], 7 \n\t" \ -- "shll_s.ph %["#IO5"], %["#IO5"], 7 \n\t" \ -- "shll_s.ph %["#IO6"], %["#IO6"], 7 \n\t" \ -- "shll_s.ph %["#IO7"], %["#IO7"], 7 \n\t" \ -- "precrqu_s.qb.ph %["#IO0"], %["#IO1"], %["#IO0"] \n\t" \ -- "precrqu_s.qb.ph %["#IO2"], %["#IO3"], %["#IO2"] \n\t" \ -- "precrqu_s.qb.ph %["#IO4"], %["#IO5"], %["#IO4"] \n\t" \ -- "precrqu_s.qb.ph %["#IO6"], %["#IO7"], %["#IO6"] \n\t" \ -- "usw %["#IO0"], "XSTR(I13)"*"#I9"(%["#I8"]) \n\t" \ -- "usw %["#IO2"], "XSTR(I13)"*"#I10"(%["#I8"]) \n\t" \ -- "usw %["#IO4"], "XSTR(I13)"*"#I11"(%["#I8"]) \n\t" \ -- "usw %["#IO6"], "XSTR(I13)"*"#I12"(%["#I8"]) \n\t" -+ "addq.ph %[" #IO0 "], %[" #IO0 "], %[" #I0 "] \n\t" \ -+ "addq.ph %[" #IO1 "], %[" #IO1 "], %[" #I1 "] \n\t" \ -+ "addq.ph %[" #IO2 "], %[" #IO2 "], %[" #I2 "] \n\t" \ -+ "addq.ph %[" #IO3 "], %[" #IO3 "], %[" #I3 "] \n\t" \ -+ "addq.ph %[" #IO4 "], %[" #IO4 "], %[" #I4 "] \n\t" \ -+ "addq.ph %[" #IO5 "], %[" #IO5 "], %[" #I5 "] \n\t" \ -+ "addq.ph %[" #IO6 "], %[" #IO6 "], %[" #I6 "] \n\t" \ -+ "addq.ph %[" #IO7 "], %[" #IO7 "], %[" #I7 "] \n\t" \ -+ "shll_s.ph %[" #IO0 "], %[" #IO0 "], 7 \n\t" \ -+ "shll_s.ph %[" #IO1 "], %[" #IO1 "], 7 \n\t" \ -+ "shll_s.ph %[" #IO2 "], %[" #IO2 "], 7 \n\t" \ -+ "shll_s.ph %[" #IO3 "], %[" #IO3 "], 7 \n\t" \ -+ "shll_s.ph %[" #IO4 "], %[" #IO4 "], 7 \n\t" \ -+ "shll_s.ph %[" #IO5 "], %[" #IO5 "], 7 \n\t" \ -+ "shll_s.ph %[" #IO6 "], %[" #IO6 "], 7 \n\t" \ -+ "shll_s.ph %[" #IO7 "], %[" #IO7 "], 7 \n\t" \ -+ "precrqu_s.qb.ph %[" #IO0 "], %[" #IO1 "], %[" #IO0 "] \n\t" \ -+ "precrqu_s.qb.ph %[" #IO2 "], %[" #IO3 "], %[" #IO2 "] \n\t" \ -+ "precrqu_s.qb.ph %[" #IO4 "], %[" #IO5 "], %[" #IO4 "] \n\t" \ -+ "precrqu_s.qb.ph %[" #IO6 "], %[" #IO7 "], %[" #IO6 "] \n\t" \ -+ "usw %[" #IO0 "], "XSTR(I13)"*" #I9 "(%[" #I8 "]) \n\t" \ -+ "usw %[" #IO2 "], "XSTR(I13)"*" #I10 "(%[" #I8 "]) \n\t" \ -+ "usw %[" #IO4 "], "XSTR(I13)"*" #I11 "(%[" #I8 "]) \n\t" \ -+ "usw %[" #IO6 "], "XSTR(I13)"*" #I12 "(%[" #I8 "]) \n\t" - - #define OUTPUT_EARLY_CLOBBER_REGS_10() \ - : [temp1]"=&r"(temp1), [temp2]"=&r"(temp2), [temp3]"=&r"(temp3), \ -diff --git a/Source/LibWebP/src/dsp/dsp.upsampling_mips_dsp_r2.c b/Source/LibWebP/src/dsp/dsp.upsampling_mips_dsp_r2.c -index 9c9665f..46f207b 100644 ---- a/Source/LibWebP/src/dsp/dsp.upsampling_mips_dsp_r2.c -+++ b/Source/LibWebP/src/dsp/dsp.upsampling_mips_dsp_r2.c -@@ -34,15 +34,15 @@ - G = G - t2 + kGCst; \ - B = B + kBCst; \ - __asm__ volatile ( \ -- "shll_s.w %["#R"], %["#R"], 9 \n\t" \ -- "shll_s.w %["#G"], %["#G"], 9 \n\t" \ -- "shll_s.w %["#B"], %["#B"], 9 \n\t" \ -- "precrqu_s.qb.ph %["#R"], %["#R"], $zero \n\t" \ -- "precrqu_s.qb.ph %["#G"], %["#G"], $zero \n\t" \ -- "precrqu_s.qb.ph %["#B"], %["#B"], $zero \n\t" \ -- "srl %["#R"], %["#R"], 24 \n\t" \ -- "srl %["#G"], %["#G"], 24 \n\t" \ -- "srl %["#B"], %["#B"], 24 \n\t" \ -+ "shll_s.w %[" #R "], %[" #R "], 9 \n\t" \ -+ "shll_s.w %[" #G "], %[" #G "], 9 \n\t" \ -+ "shll_s.w %[" #B "], %[" #B "], 9 \n\t" \ -+ "precrqu_s.qb.ph %[" #R "], %[" #R "], $zero \n\t" \ -+ "precrqu_s.qb.ph %[" #G "], %[" #G "], $zero \n\t" \ -+ "precrqu_s.qb.ph %[" #B "], %[" #B "], $zero \n\t" \ -+ "srl %[" #R "], %[" #R "], 24 \n\t" \ -+ "srl %[" #G "], %[" #G "], 24 \n\t" \ -+ "srl %[" #B "], %[" #B "], 24 \n\t" \ - : [R]"+r"(R), [G]"+r"(G), [B]"+r"(B) \ - : \ - ); \ -diff --git a/Source/LibWebP/src/dsp/dsp.yuv_mips_dsp_r2.c b/Source/LibWebP/src/dsp/dsp.yuv_mips_dsp_r2.c -index 43f02cc..45a2200 100644 ---- a/Source/LibWebP/src/dsp/dsp.yuv_mips_dsp_r2.c -+++ b/Source/LibWebP/src/dsp/dsp.yuv_mips_dsp_r2.c -@@ -39,12 +39,12 @@ - "addu %[temp5], %[temp0], %[temp1] \n\t" \ - "subu %[temp6], %[temp0], %[temp2] \n\t" \ - "addu %[temp7], %[temp0], %[temp4] \n\t" \ --".if "#K" \n\t" \ -+".if " #K " \n\t" \ - "lbu %[temp0], 1(%[y]) \n\t" \ - ".endif \n\t" \ - "shll_s.w %[temp5], %[temp5], 9 \n\t" \ - "shll_s.w %[temp6], %[temp6], 9 \n\t" \ --".if "#K" \n\t" \ -+".if " #K " \n\t" \ - "mul %[temp0], %[t_con_5], %[temp0] \n\t" \ - ".endif \n\t" \ - "shll_s.w %[temp7], %[temp7], 9 \n\t" \ -@@ -54,9 +54,9 @@ - "srl %[temp5], %[temp5], 24 \n\t" \ - "srl %[temp6], %[temp6], 24 \n\t" \ - "srl %[temp7], %[temp7], 24 \n\t" \ -- "sb %[temp5], "#R"(%[dst]) \n\t" \ -- "sb %[temp6], "#G"(%[dst]) \n\t" \ -- "sb %[temp7], "#B"(%[dst]) \n\t" \ -+ "sb %[temp5], " #R "(%[dst]) \n\t" \ -+ "sb %[temp6], " #G "(%[dst]) \n\t" \ -+ "sb %[temp7], " #B "(%[dst]) \n\t" \ - - #define ASM_CLOBBER_LIST() \ - : [temp0]"=&r"(temp0), [temp1]"=&r"(temp1), [temp2]"=&r"(temp2), \ diff --git a/gnu/packages/patches/freeimage-unbundle.patch b/gnu/packages/patches/freeimage-unbundle.patch index ca907d3276..4d9b8e25c9 100644 --- a/gnu/packages/patches/freeimage-unbundle.patch +++ b/gnu/packages/patches/freeimage-unbundle.patch @@ -1,4 +1,4 @@ -https://src.fedoraproject.org/cgit/rpms/freeimage.git/tree/FreeImage-3.17.0_unbundle.patch +https://src.fedoraproject.org/cgit/rpms/freeimage.git/tree/FreeImage_unbundle.patch diff -rupN FreeImage/genfipsrclist.sh FreeImage-new/genfipsrclist.sh --- FreeImage/genfipsrclist.sh 2015-02-20 10:52:16.000000000 +0100 @@ -25,10 +25,10 @@ diff -rupN FreeImage/gensrclist.sh FreeImage-new/gensrclist.sh #!/bin/sh -DIRLIST=". Source Source/Metadata Source/FreeImageToolkit Source/LibJPEG Source/LibPNG Source/LibTIFF4 Source/ZLib Source/LibOpenJPEG Source/OpenEXR Source/OpenEXR/Half Source/OpenEXR/Iex Source/OpenEXR/IlmImf Source/OpenEXR/IlmThread Source/OpenEXR/Imath Source/OpenEXR/IexMath Source/LibRawLite Source/LibRawLite/dcraw Source/LibRawLite/internal Source/LibRawLite/libraw Source/LibRawLite/src Source/LibWebP Source/LibJXR Source/LibJXR/common/include Source/LibJXR/image/sys Source/LibJXR/jxrgluelib" -+DIRLIST=". Source Source/Metadata Source/FreeImageToolkit Source/LibJXR Source/LibJXR/common/include Source/LibJXR/image/sys Source/LibJXR/jxrgluelib" ++DIRLIST=". Source Source/Metadata Source/FreeImageToolkit" echo "VER_MAJOR = 3" > Makefile.srcs - echo "VER_MINOR = 17.0" >> Makefile.srcs + echo "VER_MINOR = 18.0" >> Makefile.srcs diff -rupN FreeImage/Makefile.fip FreeImage-new/Makefile.fip --- FreeImage/Makefile.fip 2015-03-08 18:03:56.000000000 +0100 +++ FreeImage-new/Makefile.fip 2015-09-05 02:14:09.212684028 +0200 @@ -90,8 +90,8 @@ diff -rupN FreeImage/Makefile.gnu FreeImage-new/Makefile.gnu -# LibJXR -CXXFLAGS += -D__ANSI__ -CXXFLAGS += $(INCLUDE) -+override CFLAGS += $(INCLUDE) -D__ANSI__ $(shell pkg-config --cflags OpenEXR libopenjp2 libraw libpng libtiff-4 libwebp libwebpmux zlib) -+override LDFLAGS += -ljpeg $(shell pkg-config --libs OpenEXR libopenjp2 libraw libpng libtiff-4 libwebp libwebpmux zlib) ++override CFLAGS += $(INCLUDE) -D__ANSI__ -I/usr/include/jxrlib $(shell pkg-config --cflags OpenEXR libopenjp2 libraw libpng libtiff-4 libwebp libwebpmux zlib) ++override LDFLAGS += -ljpeg -ljpegxr -ljxrglue $(shell pkg-config --libs OpenEXR libopenjp2 libraw libpng libtiff-4 libwebp libwebpmux zlib) ifeq ($(shell sh -c 'uname -m 2>/dev/null || echo not'),x86_64) - CFLAGS += -fPIC @@ -215,6 +215,18 @@ diff -rupN FreeImage/Source/FreeImage/PluginJPEG.cpp FreeImage-new/Source/FreeIm } #include "FreeImage.h" +diff -rupN FreeImage/Source/FreeImage/PluginJXR.cpp FreeImage-new/Source/FreeImage/PluginJXR.cpp +--- FreeImage/Source/FreeImage/PluginJXR.cpp 2015-03-03 23:07:08.000000000 +0100 ++++ FreeImage-new/Source/FreeImage/PluginJXR.cpp 2018-07-31 23:37:58.561953201 +0200 +@@ -23,7 +23,7 @@ + #include "Utilities.h" + #include "../Metadata/FreeImageTag.h" + +-#include "../LibJXR/jxrgluelib/JXRGlue.h" ++#include + + // ========================================================== + // Plugin Interface diff -rupN FreeImage/Source/FreeImage/PluginPNG.cpp FreeImage-new/Source/FreeImage/PluginPNG.cpp --- FreeImage/Source/FreeImage/PluginPNG.cpp 2015-03-10 20:16:12.000000000 +0100 +++ FreeImage-new/Source/FreeImage/PluginPNG.cpp 2015-09-05 02:13:52.044353363 +0200 @@ -241,38 +253,39 @@ diff -rupN FreeImage/Source/FreeImage/PluginRAW.cpp FreeImage-new/Source/FreeIma #include "FreeImage.h" #include "Utilities.h" + diff -rupN FreeImage/Source/FreeImage/PluginTIFF.cpp FreeImage-new/Source/FreeImage/PluginTIFF.cpp --- FreeImage/Source/FreeImage/PluginTIFF.cpp 2015-03-02 02:07:08.000000000 +0100 +++ FreeImage-new/Source/FreeImage/PluginTIFF.cpp 2015-09-05 02:13:52.044353363 +0200 @@ -37,9 +37,9 @@ - - #include "FreeImage.h" - #include "Utilities.h" --#include "../LibTIFF4/tiffiop.h" -+#include - #include "../Metadata/FreeImageTag.h" --#include "../OpenEXR/Half/half.h" -+#include - - #include "FreeImageIO.h" - #include "PSDParser.h" -@@ -194,16 +194,6 @@ TIFFFdOpen(thandle_t handle, const char - return tif; - } - --/** --Open a TIFF file for reading or writing --@param name --@param mode --*/ --TIFF* --TIFFOpen(const char* name, const char* mode) { -- return 0; --} -- - // ---------------------------------------------------------- - // TIFF library FreeImage-specific routines. - // ---------------------------------------------------------- + + #include "FreeImage.h" + #include "Utilities.h" +-#include "../LibTIFF4/tiffiop.h" ++#include + #include "../Metadata/FreeImageTag.h" +-#include "../OpenEXR/Half/half.h" ++#include + + #include "FreeImageIO.h" + #include "PSDParser.h" +@@ -194,16 +194,6 @@ TIFFFdOpen(thandle_t handle, const char *name, const char *mode) { + return tif; + } + +-/** +-Open a TIFF file for reading or writing +-@param name +-@param mode +-*/ +-TIFF* +-TIFFOpen(const char* name, const char* mode) { +- return 0; +-} +- + // ---------------------------------------------------------- + // TIFF library FreeImage-specific routines. + // ---------------------------------------------------------- diff -rupN FreeImage/Source/FreeImage/PluginWebP.cpp FreeImage-new/Source/FreeImage/PluginWebP.cpp --- FreeImage/Source/FreeImage/PluginWebP.cpp 2015-03-02 02:07:08.000000000 +0100 +++ FreeImage-new/Source/FreeImage/PluginWebP.cpp 2015-09-05 02:13:52.044353363 +0200 @@ -282,15 +295,81 @@ diff -rupN FreeImage/Source/FreeImage/PluginWebP.cpp FreeImage-new/Source/FreeIm -#include "../LibWebP/src/webp/decode.h" -#include "../LibWebP/src/webp/encode.h" --#include "../LibWebP/src/enc/vp8enci.h" -#include "../LibWebP/src/webp/mux.h" +#include +#include -+// #include "../LibWebP/src/enc/vp8enci.h" +#include // ========================================================== // Plugin Interface + diff -rupN FreeImage/Source/FreeImage/PSDParser.cpp FreeImage-new/Source/FreeImage/PSDParser.cpp +--- FreeImage/Source/FreeImage/PSDParser.cpp 2016-02-11 03:18:02.000000000 +0100 ++++ FreeImage-new/Source/FreeImage/PSDParser.cpp 2018-08-01 00:17:18.323822675 +0200 +@@ -133,8 +133,8 @@ public: + template <> + class PSDGetValue<8> { + public: +- static inline UINT64 get(const BYTE * iprBuffer) { +- UINT64 v = ((const UINT64*)iprBuffer)[0]; ++ static inline uint64_t get(const BYTE * iprBuffer) { ++ uint64_t v = ((const uint64_t*)iprBuffer)[0]; + #ifndef FREEIMAGE_BIGENDIAN + SwapInt64(&v); + #endif +@@ -147,7 +147,7 @@ public: + + // -------------------------------------------------------------------------- + +-static UINT64 ++static uint64_t + psdReadSize(FreeImageIO *io, fi_handle handle, const psdHeaderInfo& header) { + if(header._Version == 1) { + BYTE Length[4]; +@@ -199,11 +199,11 @@ public: + template <> + class PSDSetValue<8> { + public: +- static inline void set(const BYTE * iprBuffer, UINT64 v) { ++ static inline void set(const BYTE * iprBuffer, uint64_t v) { + #ifndef FREEIMAGE_BIGENDIAN + SwapInt64(&v); + #endif +- ((UINT64*)iprBuffer)[0] = v; ++ ((uint64_t*)iprBuffer)[0] = v; + } + }; + +@@ -213,7 +213,7 @@ public: + // -------------------------------------------------------------------------- + + static inline bool +-psdWriteSize(FreeImageIO *io, fi_handle handle, const psdHeaderInfo& header, UINT64 v) { ++psdWriteSize(FreeImageIO *io, fi_handle handle, const psdHeaderInfo& header, uint64_t v) { + if(header._Version == 1) { + BYTE Length[4]; + psdSetLongValue(Length, sizeof(Length), (DWORD)v); +@@ -1063,10 +1063,10 @@ unsigned psdParser::GetChannelOffset(FIB + bool psdParser::ReadLayerAndMaskInfoSection(FreeImageIO *io, fi_handle handle) { + bool bSuccess = true; + +- UINT64 nTotalBytes = psdReadSize(io, handle, _headerInfo); ++ uint64_t nTotalBytes = psdReadSize(io, handle, _headerInfo); + + // Hack to handle large PSB files without using fseeko(). +- if (sizeof(long) < sizeof(UINT64)) { ++ if (sizeof(long) < sizeof(uint64_t)) { + const long offset = 0x10000000; + while (nTotalBytes > offset) { + if (io->seek_proc(handle, offset, SEEK_CUR) != 0) { +@@ -1672,7 +1672,7 @@ bool psdParser::WriteLayerAndMaskInfoSec + // Short section with no layers. + BYTE IntValue[4]; + +- UINT64 size; ++ uint64_t size; + if(_headerInfo._Version == 1) { + size = 8; + } else { diff -rupN FreeImage/Source/FreeImage/ZLibInterface.cpp FreeImage-new/Source/FreeImage/ZLibInterface.cpp --- FreeImage/Source/FreeImage/ZLibInterface.cpp 2015-03-02 02:07:10.000000000 +0100 +++ FreeImage-new/Source/FreeImage/ZLibInterface.cpp 2015-09-05 02:13:52.044353363 +0200 @@ -536,3 +615,21 @@ diff -rupN FreeImage/Source/Metadata/XTIFF.cpp FreeImage-new/Source/Metadata/XTI if(skip_write_field(tif, tag_id)) { // skip tags that are already handled by the LibTIFF writing process +diff -rupN FreeImage/Source/Utilities.h FreeImage-new/Source/Utilities.h +--- FreeImage/Source/Utilities.h 2016-04-11 15:15:32.000000000 +0200 ++++ FreeImage-new/Source/Utilities.h 2018-08-01 00:16:29.826825358 +0200 +@@ -446,12 +446,12 @@ SwapLong(DWORD *lp) { + } + + inline void +-SwapInt64(UINT64 *arg) { ++SwapInt64(uint64_t *arg) { + #if defined(_MSC_VER) && _MSC_VER >= 1310 + *arg = _byteswap_uint64(*arg); + #else + union Swap { +- UINT64 sv; ++ uint64_t sv; + DWORD ul[2]; + } tmp, result; + tmp.sv = *arg; -- cgit v1.2.3 From 3f3d712cc525d65c184cea4c2048a62a4ec87c73 Mon Sep 17 00:00:00 2001 From: Tobias Geerinckx-Rice Date: Thu, 26 Sep 2019 05:01:26 +0200 Subject: gnu: beets: Update to 1.4.9. * gnu/packages/music.scm (beets): Update to 1.4.9. [source]: Remove patch. [arguments]: Remove more Python 3.7 compatibility fixes. * gnu/packages/patches/beets-python-3.7-fix.patch: Delete file. * gnu/local.mk (dist_patch_DATA): Remove it. --- gnu/local.mk | 1 - gnu/packages/music.scm | 11 +---- gnu/packages/patches/beets-python-3.7-fix.patch | 57 ------------------------- 3 files changed, 2 insertions(+), 67 deletions(-) delete mode 100644 gnu/packages/patches/beets-python-3.7-fix.patch (limited to 'gnu/packages/patches') diff --git a/gnu/local.mk b/gnu/local.mk index 919e836b8c..49dc4e7b97 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -711,7 +711,6 @@ dist_patch_DATA = \ %D%/packages/patches/bash-completion-directories.patch \ %D%/packages/patches/bastet-change-source-of-unordered_set.patch \ %D%/packages/patches/bazaar-CVE-2017-14176.patch \ - %D%/packages/patches/beets-python-3.7-fix.patch \ %D%/packages/patches/beignet-correct-file-names.patch \ %D%/packages/patches/benchmark-unbundle-googletest.patch \ %D%/packages/patches/biber-fix-encoding-write.patch \ diff --git a/gnu/packages/music.scm b/gnu/packages/music.scm index b28b375067..508f2ea3bf 100644 --- a/gnu/packages/music.scm +++ b/gnu/packages/music.scm @@ -2813,14 +2813,13 @@ (define-public instantmusic (define-public beets (package (name "beets") - (version "1.4.7") + (version "1.4.9") (source (origin (method url-fetch) (uri (pypi-uri "beets" version)) - (patches (search-patches "beets-python-3.7-fix.patch")) (sha256 (base32 - "0w3gz69s9gf5ih69d4sddgh7ndj7658m621bp742zldvjakdncrs")))) + "0m40rjimvfgy1dv04p8f8d5dvi2855v4ix99a9xr900cmcn476yj")))) (build-system python-build-system) (arguments `(#:phases @@ -2829,12 +2828,6 @@ (define-public beets (lambda _ (setenv "HOME" (string-append (getcwd) "/tmp")) #t)) - (add-after 'unpack 'make-python3.7-compatible - (lambda _ - ;; See . - (substitute* "beets/autotag/hooks.py" - (("re\\._pattern_type") "re.Pattern")) - #t)) (replace 'check (lambda _ (invoke "nosetests" "-v")))))) diff --git a/gnu/packages/patches/beets-python-3.7-fix.patch b/gnu/packages/patches/beets-python-3.7-fix.patch deleted file mode 100644 index 43707cd9d0..0000000000 --- a/gnu/packages/patches/beets-python-3.7-fix.patch +++ /dev/null @@ -1,57 +0,0 @@ -Fix compatibility issue with Python 3.7: - -https://github.com/beetbox/beets/issues/2978 - -Patch copied from upstream source repository: - -https://github.com/beetbox/beets/commit/15d44f02a391764da1ce1f239caef819f08beed8 - -From 15d44f02a391764da1ce1f239caef819f08beed8 Mon Sep 17 00:00:00 2001 -From: Adrian Sampson -Date: Sun, 22 Jul 2018 12:34:19 -0400 -Subject: [PATCH] Fix Python 3.7 compatibility (#2978) - ---- - beets/autotag/hooks.py | 8 +++++++- - docs/changelog.rst | 2 ++ - 2 files changed, 9 insertions(+), 1 deletion(-) - -diff --git a/beets/autotag/hooks.py b/beets/autotag/hooks.py -index 3615a9333..1c62a54c5 100644 ---- a/beets/autotag/hooks.py -+++ b/beets/autotag/hooks.py -@@ -31,6 +31,12 @@ - - log = logging.getLogger('beets') - -+# The name of the type for patterns in re changed in Python 3.7. -+try: -+ Pattern = re._pattern_type -+except AttributeError: -+ Pattern = re.Pattern -+ - - # Classes used to represent candidate options. - -@@ -433,7 +439,7 @@ def _eq(self, value1, value2): - be a compiled regular expression, in which case it will be - matched against `value2`. - """ -- if isinstance(value1, re._pattern_type): -+ if isinstance(value1, Pattern): - return bool(value1.match(value2)) - return value1 == value2 - -#diff --git a/docs/changelog.rst b/docs/changelog.rst -#index be6de2904..d487f31f5 100644 -#--- a/docs/changelog.rst -#+++ b/docs/changelog.rst -#@@ -19,6 +19,8 @@ New features: -# -# Fixes: -# -#+* Fix compatibility Python 3.7 and its change to a name in the ``re`` module. -#+ :bug:`2978` -# * R128 normalization tags are now properly deleted from files when the values -# are missing. -# Thanks to :user:`autrimpo`. -- cgit v1.2.3 From 6eb1d20b682d1256bb4561517daa616b15fec22b Mon Sep 17 00:00:00 2001 From: Hartmut Goebel Date: Thu, 1 Aug 2019 15:27:28 +0200 Subject: gnu: Add debops. * gnu/packages/admin.scm (debops): New variable. * gnu/packages/patches/debops-constants-for-external-program-names.patch, gnu/packages/patches/debops-debops-defaults-fall-back-to-less.patch: New files. * gnu/local.mk: Add them. --- gnu/local.mk | 2 + gnu/packages/admin.scm | 98 ++++++++ ...bops-constants-for-external-program-names.patch | 276 +++++++++++++++++++++ .../debops-debops-defaults-fall-back-to-less.patch | 45 ++++ 4 files changed, 421 insertions(+) create mode 100644 gnu/packages/patches/debops-constants-for-external-program-names.patch create mode 100644 gnu/packages/patches/debops-debops-defaults-fall-back-to-less.patch (limited to 'gnu/packages/patches') diff --git a/gnu/local.mk b/gnu/local.mk index 49dc4e7b97..a6fe439904 100644 --- a/gnu/local.mk +++ b/gnu/local.mk @@ -765,6 +765,8 @@ dist_patch_DATA = \ %D%/packages/patches/dbus-helper-search-path.patch \ %D%/packages/patches/dbus-CVE-2019-12749.patch \ %D%/packages/patches/dealii-mpi-deprecations.patch \ + %D%/packages/patches/debops-constants-for-external-program-names.patch \ + %D%/packages/patches/debops-debops-defaults-fall-back-to-less.patch \ %D%/packages/patches/deja-dup-use-ref-keyword-for-iter.patch \ %D%/packages/patches/dfu-programmer-fix-libusb.patch \ %D%/packages/patches/diffutils-gets-undeclared.patch \ diff --git a/gnu/packages/admin.scm b/gnu/packages/admin.scm index 327abe455a..6d5e4b9fcc 100644 --- a/gnu/packages/admin.scm +++ b/gnu/packages/admin.scm @@ -26,6 +26,7 @@ ;;; Copyright © 2019 Brett Gilio ;;; Copyright © 2019 Björn Höfling ;;; Copyright © 2019 Jakob L. Kreuze +;;; Copyright © 2019 Hartmut Goebel ;;; ;;; This file is part of GNU Guix. ;;; @@ -60,6 +61,7 @@ (define-module (gnu packages admin) #:use-module (gnu packages base) #:use-module (gnu packages bash) #:use-module (gnu packages check) + #:use-module (gnu packages crypto) #:use-module (gnu packages cyrus-sasl) #:use-module (gnu packages dns) #:use-module (gnu packages file) @@ -112,6 +114,7 @@ (define-module (gnu packages admin) #:use-module (gnu packages boost) #:use-module (gnu packages elf) #:use-module (gnu packages mpi) + #:use-module (gnu packages version-control) #:use-module (gnu packages web)) (define-public aide @@ -1903,6 +1906,101 @@ (define-public ansible things like zero-downtime rolling updates with load balancers.") (license license:gpl3+))) +(define-public debops + (package + (name "debops") + (version "1.1.0") + (source + (origin + (method git-fetch) + (uri (git-reference + (url "https://github.com/debops/debops") + (commit (string-append "v" version)))) + (file-name (git-file-name name version)) + (sha256 + (base32 "052b2dykdn35pdpn9s4prawl6nl6yzih8nyf54hpvhpisvjrm1v5")) + (patches + (search-patches "debops-constants-for-external-program-names.patch" + "debops-debops-defaults-fall-back-to-less.patch")))) + (build-system python-build-system) + (native-inputs + `(("git" ,git))) + (inputs + `(("ansible" ,ansible) + ("encfs" ,encfs) + ("fuse" ,fuse) + ("util-linux" ,util-linux) ;; for umount + ("findutils" ,findutils) + ("gnupg" ,gnupg) + ("which" ,which))) + (propagated-inputs + `(("python-future" ,python-future) + ("python-distro" ,python-distro))) + (arguments + `(#:tests? #f + #:phases + (modify-phases %standard-phases + (add-after 'unpack 'nuke-debops-update + (lambda _ + (chmod "bin/debops-update" #o755) ; FIXME work-around git-fetch issue + (with-output-to-file "bin/debops-update" + (lambda () + (format #t "#!/bin/sh +echo 'debops is installed via guix. guix-update is useless in this case. +Please use `guix package -u debops` instead.'"))) + #t)) + ;; patch shebangs only in actuall scripts, not in files included in + ;; roles (which are to be delivered to the targte systems) + (delete `patch-generated-file-shebangs) + (replace 'patch-source-shebangs + (lambda _ + (for-each patch-shebang + (find-files "bin" + (lambda (file stat) + ;; Filter out symlinks. + (eq? 'regular (stat:type stat))) + #:stat lstat)))) + (add-after 'unpack 'fix-paths + (lambda _ + (define (substitute-program-names file) + ;; e.g. ANSIBLE_PLAYBOOK = '/gnu/store/…/bin/ansible-playbook' + (for-each + (lambda (name) + (let ((varname (string-upcase + (string-map + (lambda (c) (if (char=? c #\-) #\_ c)) + name)))) + (substitute* file + (((string-append "^(" varname " = )'.*'") line prefix) + (string-append prefix "'" (which name) "'"))))) + '("ansible-playbook" "encfs" "find" "fusermount" + "umount" "gpg" "ansible" "which"))) + (for-each substitute-program-names + '("bin/debops" + "bin/debops-padlock" + "bin/debops-task" + "debops/__init__.py" + "debops/cmds/__init__.py")) + #t))))) + (home-page "https://www.debops.org/") + (synopsis "Collection of general-purpose Ansible roles") + (description "The Ansible roles provided by that can be used to manage +Debian or Ubuntu hosts. In addition, a default set of Ansible playbooks can +be used to apply the provided roles in a controlled way, using Ansible +inventory groups. + +The roles are written with a high customization in mind, which can be done +using Ansible inventory. This way the role and playbook code can be shared +between multiple environments, with different configuration in to each one. + +Services can be managed on a single host, or spread between multiple hosts. +DebOps provides support for different SQL and NoSQL databases, web servers, +programming languages and specialized applications useful in a data center +environment or in a cluster. The project can also be used to deploy +virtualization environments using KVM/libvirt, Docker or LXC technologies to +manage virtual machines and/or containers.") + (license license:gpl3+))) + (define-public emacs-ansible-doc (let ((commit "86083a7bb2ed0468ca64e52076b06441a2f8e9e0")) (package diff --git a/gnu/packages/patches/debops-constants-for-external-program-names.patch b/gnu/packages/patches/debops-constants-for-external-program-names.patch new file mode 100644 index 0000000000..b3b34ed323 --- /dev/null +++ b/gnu/packages/patches/debops-constants-for-external-program-names.patch @@ -0,0 +1,276 @@ +From 78d5cddafebb28e2e54efeb781495b5607ddb356 Mon Sep 17 00:00:00 2001 +From: Hartmut Goebel +Date: Thu, 8 Aug 2019 15:19:48 +0200 +Subject: [PATCH] Scripts: Use constants for external program names. + +This makes it much, much easier to replace the program +with one using an absolute path. This is necessary for +e.g. Guix to keep references to these external programs. +--- + bin/debops | 10 +++++++--- + bin/debops-padlock | 21 +++++++++++++++------ + bin/debops-task | 7 +++++-- + bin/debops-update | 18 +++++++++++------- + debops/__init__.py | 17 ++++++++++++----- + debops/cmds/__init__.py | 6 +++++- + 6 files changed, 55 insertions(+), 24 deletions(-) + +diff --git a/bin/debops b/bin/debops +index 2b7ad3f88..caaeb892f 100755 +--- a/bin/debops ++++ b/bin/debops +@@ -59,6 +59,10 @@ ConfigFileHeader = """\ + # You can manipulate the contents of this file via `.debops.cfg`. + """ + ++# External programms used. List here for easy substitution for ++# hard-coded paths. ++ANSIBLE_PLAYBOOK = 'ansible-playbook' ++ + + def write_config(filename, config): + cfgparser = configparser.ConfigParser() +@@ -131,7 +135,7 @@ def gen_ansible_cfg(filename, config, project_root, playbooks_path, + os.path.join(playbooks_path, "roles"), + "/etc/ansible/roles"))) + +- ansible_version_out = subprocess.check_output(["ansible-playbook", ++ ansible_version_out = subprocess.check_output([ANSIBLE_PLAYBOOK, + "--version"]).decode() + + # Get first line and split by spaces to get second 'word'. +@@ -197,7 +201,7 @@ def main(cmd_args): + playbooks_path = '/nonexistent' + + # Make sure required commands are present +- require_commands('ansible-playbook') ++ require_commands(ANSIBLE_PLAYBOOK) + + # Check if user specified a potential playbook name as the first + # argument. If yes, use it as the playbook name and remove it from +@@ -256,7 +260,7 @@ def main(cmd_args): + print("Running Ansible playbooks:") + for element in play_list: + print(element) +- return subprocess.call(['ansible-playbook'] + play_list + arg_list) ++ return subprocess.call([ANSIBLE_PLAYBOOK] + play_list + arg_list) + finally: + if revert_unlock: + padlock_lock(encfs_encrypted) +diff --git a/bin/debops-padlock b/bin/debops-padlock +index bfdfb8e06..2a97716cd 100755 +--- a/bin/debops-padlock ++++ b/bin/debops-padlock +@@ -67,6 +67,14 @@ devrandom = os.environ.get('DEVRANDOM', "/dev/urandom") + + SCRIPT_FILENAME = 'padlock-script' + ++# External programms used. List here for easy substitution for ++# hard-coded paths. ++ENCFS = 'encfs' ++FIND = 'find' ++FUSERMOUNT = 'fusermount' ++UMOUNT = 'umount' ++GPG = 'gpg' ++ + # ---- DebOps environment setup ---- + + +@@ -80,9 +88,9 @@ def main(subcommand_func, **kwargs): + # Make sure required commands are present + # OS X compatibility + if sys.platform == 'darwin': +- require_commands('encfs', 'find', 'umount', 'gpg') ++ require_commands(ENCFS, FIND, UMOUNT, GPG) + else: +- require_commands('encfs', 'find', 'fusermount', 'gpg') ++ require_commands(ENCFS, FIND, FUSERMOUNT, GPG) + + inventory_path = find_inventorypath(project_root, required=False) + # If inventory hasn't been found automatically, assume it's the default +@@ -121,7 +129,7 @@ def init(encfs_decrypted, encfs_encrypted, recipients): + # Generate a random password and encrypt it with GPG keys of recipients. + print("Generating a random", ENCFS_KEYFILE_LENGTH, "char password") + pwd = gen_pwd() +- gpg = subprocess.Popen(['gpg', '--encrypt', '--armor', ++ gpg = subprocess.Popen([GPG, '--encrypt', '--armor', + '--output', encfs_keyfile] + recipients, + stdin=subprocess.PIPE) + gpg.communicate(pwd.encode('utf-8')) +@@ -133,9 +141,10 @@ def init(encfs_decrypted, encfs_encrypted, recipients): + # NB2: We can not use padlock_unlock here, because the config file + # does not yet exist. + encfs = subprocess.Popen([ +- 'encfs', encfs_encrypted, encfs_decrypted, ++ ENCFS, encfs_encrypted, encfs_decrypted, + '--extpass', +- 'gpg --decrypt --no-mdc-warning --output - '+shquote(encfs_keyfile)], ++ GPG + ' --decrypt --no-mdc-warning --output - ' ++ + shquote(encfs_keyfile)], + stdin=subprocess.PIPE) + encfs.communicate(('p\n'+pwd).encode('utf-8')) + +@@ -154,7 +163,7 @@ def init(encfs_decrypted, encfs_encrypted, recipients): + + # Protect the EncFS configuration file by also encrypting it with + # the GPG keys of recipients. +- subprocess.call(['gpg', '--encrypt', '--armor', ++ subprocess.call([GPG, '--encrypt', '--armor', + '--output', encfs_configfile+'.asc'] + + recipients + [encfs_configfile]) + os.remove(encfs_configfile) +diff --git a/bin/debops-task b/bin/debops-task +index 223e5f834..dc31ad4e6 100755 +--- a/bin/debops-task ++++ b/bin/debops-task +@@ -49,11 +49,14 @@ project_root = find_debops_project(required=True) + # todo: need to decide on semantics! + # config = read_config(project_root) + ++# External programms used. List here for easy substitution for ++# hard-coded paths. ++ANSIBLE = 'ansible' + + # ---- Main script ---- + + # Make sure required commands are present +-require_commands('ansible') ++require_commands(ANSIBLE) + + ansible_inventory = find_inventorypath(project_root) + +@@ -71,5 +74,5 @@ if INSECURE: + os.environ['ANSIBLE_HOST_KEY_CHECKING'] = 'False' + + # Run ansible with custom environment +-cmd = ['ansible'] + module + sys.argv[1:] ++cmd = [ANSIBLE] + module + sys.argv[1:] + subprocess.call(cmd) +diff --git a/bin/debops-update b/bin/debops-update +index 88c5e2c82..cc7e57cb0 100755 +--- a/bin/debops-update ++++ b/bin/debops-update +@@ -90,6 +90,10 @@ GALAXY_REQUIREMENTS = "galaxy/requirements.txt" + # Default Ansible Galaxy user account name + GALAXY_ACCOUNT = "debops" + ++# External programms used. List here for easy substitution for ++# hard-coded paths. ++GIT = 'git' ++ + + # ---- Functions ---- + +@@ -137,7 +141,7 @@ def clone_git_repository(repo_uri, branch, destination, dry_run=False): + if dry_run: + print("Cloning '%s' to %s..." % (repo_uri, destination)) + else: +- subprocess.call(['git', 'clone', '--quiet', '--branch', branch, ++ subprocess.call([GIT, 'clone', '--quiet', '--branch', branch, + repo_uri, destination]) + + +@@ -152,22 +156,22 @@ def update_git_repository(path, dry_run=False, remote_uri=False): + os.chdir(path) + + if dry_run: +- subprocess.call(['git', 'fetch']) +- subprocess.call(['git', 'diff', 'HEAD', 'origin', '--stat']) ++ subprocess.call([GIT, 'fetch']) ++ subprocess.call([GIT, 'diff', 'HEAD', 'origin', '--stat']) + else: + # Get the current sha of the head branch + current_sha = subprocess.check_output( +- ['git', 'rev-parse', 'HEAD']).strip() ++ [GIT, 'rev-parse', 'HEAD']).strip() + + # Fetch it silently and store the new sha +- subprocess.call(['git', 'fetch', '--quiet']) ++ subprocess.call([GIT, 'fetch', '--quiet']) + fetch_sha = subprocess.check_output( +- ['git', 'rev-parse', 'FETCH_HEAD']).strip() ++ [GIT, 'rev-parse', 'FETCH_HEAD']).strip() + + if current_sha != fetch_sha: + print() + print('--') +- subprocess.call(['git', 'merge', fetch_sha]) ++ subprocess.call([GIT, 'merge', fetch_sha]) + + if remote_uri: + compare_uri = (remote_uri + '/compare/' + current_sha[:7] +diff --git a/debops/__init__.py b/debops/__init__.py +index 1c2cedcb0..da8430e41 100644 +--- a/debops/__init__.py ++++ b/debops/__init__.py +@@ -93,6 +93,13 @@ ENCFS_KEYFILE = ".encfs6.keyfile" + # Length of the random EncFS password stored in encrypted keyfile + ENCFS_KEYFILE_LENGTH = 256 + ++# External programms used. List here for easy substitution for ++# hard-coded paths. ++ENCFS = 'encfs' ++FUSERMOUNT = 'fusermount' ++UMOUNT = 'umount' ++GPG = 'gpg' ++ + + # ---- Functions ---- + +@@ -180,9 +187,9 @@ def padlock_lock(encrypted_path): + return False + # OS X compatibility + if sys.platform == 'darwin': +- subprocess.call(['umount', decrypted_path]) ++ subprocess.call([UMOUNT, decrypted_path]) + else: +- subprocess.call(['fusermount', '-u', decrypted_path]) ++ subprocess.call([FUSERMOUNT, '-u', decrypted_path]) + return True + + +@@ -237,14 +244,14 @@ def padlock_unlock(encrypted_path): + # Start encfs. It will wait for input on the `configfile` named + # pipe. + encfs = subprocess.Popen([ +- 'encfs', encrypted_path, decrypted_path, ++ ENCFS, encrypted_path, decrypted_path, + '--extpass', +- 'gpg --decrypt --no-mdc-warning --output - %s' % shquote(keyfile)]) ++ GPG + ' --decrypt --no-mdc-warning --output - %s' % shquote(keyfile)]) + # now decrypt the config and write it into the named pipe + with open(configfile, 'w') as fh: + # NB: gpg must write to stdout to avoid it is asking whether + # the file should be overwritten +- subprocess.Popen(['gpg', ++ subprocess.Popen([GPG, + '--decrypt', '--no-mdc-warning', '--output', '-', + crypted_configfile], stdout=fh).wait() + encfs.wait() +diff --git a/debops/cmds/__init__.py b/debops/cmds/__init__.py +index b221fa191..9fabf43a5 100644 +--- a/debops/cmds/__init__.py ++++ b/debops/cmds/__init__.py +@@ -55,6 +55,10 @@ SCRIPT_NAME = os.path.basename(sys.argv[0]) + # command line) + INSECURE = bool(os.environ.get('INSECURE', False)) + ++# External programms used. List here for easy substitution for ++# hard-coded paths. ++WHICH = 'which' ++ + + def error_msg(message, severity="Error"): + """ +@@ -70,7 +74,7 @@ def require_commands(*cmd_names): + Check if required commands exist. + """ + def command_exists(cmd_name): +- which = "where" if platform.system() == "Windows" else "which" ++ which = "where" if platform.system() == "Windows" else WHICH + return not subprocess.call([which, cmd_name], + stdout=DEVNULL, stderr=subprocess.STDOUT) + +-- +2.21.0 + diff --git a/gnu/packages/patches/debops-debops-defaults-fall-back-to-less.patch b/gnu/packages/patches/debops-debops-defaults-fall-back-to-less.patch new file mode 100644 index 0000000000..bbb6b7c08e --- /dev/null +++ b/gnu/packages/patches/debops-debops-defaults-fall-back-to-less.patch @@ -0,0 +1,45 @@ +From 5059daf8bd59a83f520c14731173ea76ce8b8661 Mon Sep 17 00:00:00 2001 +From: Hartmut Goebel +Date: Sun, 8 Sep 2019 13:09:15 +0200 +Subject: [PATCH] [debops-defaults] If `view` is not available, try less, etc. + +--- + bin/debops-defaults | 21 +++++++++++++++------ + 1 file changed, 15 insertions(+), 6 deletions(-) + +diff --git a/bin/debops-defaults b/bin/debops-defaults +index 9dd87fe0a..3e3db4c41 100755 +--- a/bin/debops-defaults ++++ b/bin/debops-defaults +@@ -96,13 +96,22 @@ def main(role_list): + config = read_config(project_root) + playbooks_path = find_playbookpath(config, project_root, required=True) + +- # Make sure required commands are present +- require_commands('view') +- +- if sys.stdout.isatty(): ++ # Check if one of the output commands is present ++ sys.stdout = io.BytesIO() # suppress error message, if any ++ for cmd_args in (('view', '+set ft=yaml', '-'), ++ ('less', '-'), ++ ('more', '-')): ++ try: ++ require_commands(cmd_args[0]) ++ break ++ except SystemExit: ++ # this command was not found ++ cmd_args = None ++ sys.stdout = sys.__stdout__ ++ ++ if cmd_args and sys.stdout.isatty(): + # if script is run as standalone, redirect to view +- view = subprocess.Popen(['view', '+set ft=yaml', '-'], +- stdin=subprocess.PIPE) ++ view = subprocess.Popen(cmd_args, stdin=subprocess.PIPE) + try: + aggregate_defaults(playbooks_path, role_list, view.stdin) + except IOError as e: +-- +2.21.0 + -- cgit v1.2.3