diff options
Diffstat (limited to 'guix')
| -rw-r--r-- | guix/config.scm.in | 4 | ||||
| -rw-r--r-- | guix/lzlib.scm | 633 | ||||
| -rw-r--r-- | guix/self.scm | 1 |
3 files changed, 638 insertions, 0 deletions
diff --git a/guix/config.scm.in b/guix/config.scm.in index 247b15ed81..0ada0f3c38 100644 --- a/guix/config.scm.in +++ b/guix/config.scm.in @@ -34,6 +34,7 @@ %system %libz + %liblz %gzip %bzip2 %xz)) @@ -90,6 +91,9 @@ (define %libz "@LIBZ@") +(define %liblz + "@LIBLZ@") + (define %gzip "@GZIP@") diff --git a/guix/lzlib.scm b/guix/lzlib.scm new file mode 100644 index 0000000000..d596f0d95d --- /dev/null +++ b/guix/lzlib.scm @@ -0,0 +1,633 @@ +;;; GNU Guix --- Functional package management for GNU +;;; Copyright © 2019 Pierre Neidhardt <mail@ambrevar.xyz> +;;; +;;; This file is part of GNU Guix. +;;; +;;; GNU Guix is free software; you can redistribute it and/or modify it +;;; under the terms of the GNU General Public License as published by +;;; the Free Software Foundation; either version 3 of the License, or (at +;;; your option) any later version. +;;; +;;; GNU Guix is distributed in the hope that it will be useful, but +;;; WITHOUT ANY WARRANTY; without even the implied warranty of +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;;; GNU General Public License for more details. +;;; +;;; You should have received a copy of the GNU General Public License +;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>. + +(define-module (guix lzlib) + #:use-module (rnrs bytevectors) + #:use-module (rnrs arithmetic bitwise) + #:use-module (ice-9 binary-ports) + #:use-module (ice-9 match) + #:use-module (system foreign) + #:use-module (guix config) + #:export (lzlib-available? + make-lzip-input-port + make-lzip-output-port + call-with-lzip-input-port + call-with-lzip-output-port + %default-member-length-limit + %default-compression-level)) + +;;; Commentary: +;;; +;;; Bindings to the lzlib / liblz API. Some convenience functions are also +;;; provided (see the export). +;;; +;;; While the bindings are complete, the convenience functions only support +;;; single member archives. To decompress single member archives, we loop +;;; until lz-decompress-read returns 0. This is simpler. To support multiple +;;; members properly, we need (among others) to call lz-decompress-finish and +;;; loop over lz-decompress-read until lz-decompress-finished? returns #t. +;;; Otherwise a multi-member archive starting with an empty member would only +;;; decompress the empty member and stop there, resulting in truncated output. + +;;; Code: + +(define %lzlib + ;; File name of lzlib's shared library. When updating via 'guix pull', + ;; '%liblz' might be undefined so protect against it. + (delay (dynamic-link (if (defined? '%liblz) + %liblz + "liblz")))) + +(define (lzlib-available?) + "Return true if lzlib is available, #f otherwise." + (false-if-exception (force %lzlib))) + +(define (lzlib-procedure ret name parameters) + "Return a procedure corresponding to C function NAME in liblz, or #f if +either lzlib or the function could not be found." + (match (false-if-exception (dynamic-func name (force %lzlib))) + ((? pointer? ptr) + (pointer->procedure ret ptr parameters)) + (#f + #f))) + +(define-wrapped-pointer-type <lz-decoder> + ;; Scheme counterpart of the 'LZ_Decoder' opaque type. + lz-decoder? + pointer->lz-decoder + lz-decoder->pointer + (lambda (obj port) + (format port "#<lz-decoder ~a>" + (number->string (object-address obj) 16)))) + +(define-wrapped-pointer-type <lz-encoder> + ;; Scheme counterpart of the 'LZ_Encoder' opaque type. + lz-encoder? + pointer->lz-encoder + lz-encoder->pointer + (lambda (obj port) + (format port "#<lz-encoder ~a>" + (number->string (object-address obj) 16)))) + +;; From lzlib.h +(define %error-number-ok 0) +(define %error-number-bad-argument 1) +(define %error-number-mem-error 2) +(define %error-number-sequence-error 3) +(define %error-number-header-error 4) +(define %error-number-unexpected-eof 5) +(define %error-number-data-error 6) +(define %error-number-library-error 7) + + +;; Compression bindings. + +(define lz-compress-open + (let ((proc (lzlib-procedure '* "LZ_compress_open" (list int int uint64))) + ;; member-size is an "unsigned long long", and the C standard guarantees + ;; a minimum range of 0..2^64-1. + (unlimited-size (- (expt 2 64) 1))) + (lambda* (dictionary-size match-length-limit #:optional (member-size unlimited-size)) + "Initialize the internal stream state for compression and returns a +pointer that can only be used as the encoder argument for the other +lz-compress functions, or a null pointer if the encoder could not be +allocated. + +See the manual: (lzlib) Compression functions." + (let ((encoder-ptr (proc dictionary-size match-length-limit member-size))) + (if (not (= (lz-compress-error encoder-ptr) -1)) + (pointer->lz-encoder encoder-ptr) + (throw 'lzlib-error 'lz-compress-open)))))) + +(define lz-compress-close + (let ((proc (lzlib-procedure int "LZ_compress_close" '(*)))) + (lambda (encoder) + "Close encoder. ENCODER can no longer be used as an argument to any +lz-compress function. " + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-close ret) + ret))))) + +(define lz-compress-finish + (let ((proc (lzlib-procedure int "LZ_compress_finish" '(*)))) + (lambda (encoder) + "Tell that all the data for this member have already been written (with +the `lz-compress-write' function). It is safe to call `lz-compress-finish' as +many times as needed. After all the produced compressed data have been read +with `lz-compress-read' and `lz-compress-member-finished?' returns #t, a new +member can be started with 'lz-compress-restart-member'." + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-finish (lz-compress-error encoder)) + ret))))) + +(define lz-compress-restart-member + (let ((proc (lzlib-procedure int "LZ_compress_restart_member" (list '* uint64)))) + (lambda (encoder member-size) + "Start a new member in a multimember data stream. +Call this function only after `lz-compress-member-finished?' indicates that the +current member has been fully read (with the `lz-compress-read' function)." + (let ((ret (proc (lz-encoder->pointer encoder) member-size))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-restart-member + (lz-compress-error encoder)) + ret))))) + +(define lz-compress-sync-flush + (let ((proc (lzlib-procedure int "LZ_compress_sync_flush" (list '*)))) + (lambda (encoder) + "Make available to `lz-compress-read' all the data already written with +the `LZ-compress-write' function. First call `lz-compress-sync-flush'. Then +call 'lz-compress-read' until it returns 0. + +Repeated use of `LZ-compress-sync-flush' may degrade compression ratio, +so use it only when needed. " + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-sync-flush + (lz-compress-error encoder)) + ret))))) + +(define lz-compress-read + (let ((proc (lzlib-procedure int "LZ_compress_read" (list '* '* int)))) + (lambda* (encoder lzfile-bv #:optional (start 0) (count (bytevector-length lzfile-bv))) + "Read up to COUNT bytes from the encoder stream, storing the results in LZFILE-BV. +Return the number of uncompressed bytes written, a strictly positive integer." + (let ((ret (proc (lz-encoder->pointer encoder) + (bytevector->pointer lzfile-bv start) + count))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-read (lz-compress-error encoder)) + ret))))) + +(define lz-compress-write + (let ((proc (lzlib-procedure int "LZ_compress_write" (list '* '* int)))) + (lambda* (encoder bv #:optional (start 0) (count (bytevector-length bv))) + "Write up to COUNT bytes from BV to the encoder stream. Return the +number of uncompressed bytes written, a strictly positive integer." + (let ((ret (proc (lz-encoder->pointer encoder) + (bytevector->pointer bv start) + count))) + (if (< ret 0) + (throw 'lzlib-error 'lz-compress-write (lz-compress-error encoder)) + ret))))) + +(define lz-compress-write-size + (let ((proc (lzlib-procedure int "LZ_compress_write_size" '(*)))) + (lambda (encoder) + "The maximum number of bytes that can be immediately written through the +`lz-compress-write' function. + +It is guaranteed that an immediate call to `lz-compress-write' will accept a +SIZE up to the returned number of bytes. " + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-write-size (lz-compress-error encoder)) + ret))))) + +(define lz-compress-error + (let ((proc (lzlib-procedure int "LZ_compress_errno" '(*)))) + (lambda (encoder) + "ENCODER can be a Scheme object or a pointer." + (let* ((error-number (proc (if (lz-encoder? encoder) + (lz-encoder->pointer encoder) + encoder)))) + error-number)))) + +(define lz-compress-finished? + (let ((proc (lzlib-procedure int "LZ_compress_finished" '(*)))) + (lambda (encoder) + "Return #t if all the data have been read and `lz-compress-close' can +be safely called. Otherwise return #f." + (let ((ret (proc (lz-encoder->pointer encoder)))) + (match ret + (1 #t) + (0 #f) + (_ (throw 'lzlib-error 'lz-compress-finished? (lz-compress-error encoder)))))))) + +(define lz-compress-member-finished? + (let ((proc (lzlib-procedure int "LZ_compress_member_finished" '(*)))) + (lambda (encoder) + "Return #t if the current member, in a multimember data stream, has +been fully read and 'lz-compress-restart-member' can be safely called. +Otherwise return #f." + (let ((ret (proc (lz-encoder->pointer encoder)))) + (match ret + (1 #t) + (0 #f) + (_ (throw 'lzlib-error 'lz-compress-member-finished? (lz-compress-error encoder)))))))) + +(define lz-compress-data-position + (let ((proc (lzlib-procedure uint64 "LZ_compress_data_position" '(*)))) + (lambda (encoder) + "Return the number of input bytes already compressed in the current +member." + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-data-position + (lz-compress-error encoder)) + ret))))) + +(define lz-compress-member-position + (let ((proc (lzlib-procedure uint64 "LZ_compress_member_position" '(*)))) + (lambda (encoder) + "Return the number of compressed bytes already produced, but perhaps +not yet read, in the current member." + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-member-position + (lz-compress-error encoder)) + ret))))) + +(define lz-compress-total-in-size + (let ((proc (lzlib-procedure uint64 "LZ_compress_total_in_size" '(*)))) + (lambda (encoder) + "Return the total number of input bytes already compressed." + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-total-in-size + (lz-compress-error encoder)) + ret))))) + +(define lz-compress-total-out-size + (let ((proc (lzlib-procedure uint64 "LZ_compress_total_out_size" '(*)))) + (lambda (encoder) + "Return the total number of compressed bytes already produced, but +perhaps not yet read." + (let ((ret (proc (lz-encoder->pointer encoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-compress-total-out-size + (lz-compress-error encoder)) + ret))))) + + +;; Decompression bindings. + +(define lz-decompress-open + (let ((proc (lzlib-procedure '* "LZ_decompress_open" '()))) + (lambda () + "Initializes the internal stream state for decompression and returns a +pointer that can only be used as the decoder argument for the other +lz-decompress functions, or a null pointer if the decoder could not be +allocated. + +See the manual: (lzlib) Decompression functions." + (let ((decoder-ptr (proc))) + (if (not (= (lz-decompress-error decoder-ptr) -1)) + (pointer->lz-decoder decoder-ptr) + (throw 'lzlib-error 'lz-decompress-open)))))) + +(define lz-decompress-close + (let ((proc (lzlib-procedure int "LZ_decompress_close" '(*)))) + (lambda (decoder) + "Close decoder. DECODER can no longer be used as an argument to any +lz-decompress function. " + (let ((ret (proc (lz-decoder->pointer decoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-close ret) + ret))))) + +(define lz-decompress-finish + (let ((proc (lzlib-procedure int "LZ_decompress_finish" '(*)))) + (lambda (decoder) + "Tell that all the data for this stream have already been written (with +the `lz-decompress-write' function). It is safe to call +`lz-decompress-finish' as many times as needed." + (let ((ret (proc (lz-decoder->pointer decoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-finish (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-reset + (let ((proc (lzlib-procedure int "LZ_decompress_reset" '(*)))) + (lambda (decoder) + "Reset the internal state of DECODER as it was just after opening it +with the `lz-decompress-open' function. Data stored in the internal buffers +is discarded. Position counters are set to 0." + (let ((ret (proc (lz-decoder->pointer decoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-reset + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-sync-to-member + (let ((proc (lzlib-procedure int "LZ_decompress_sync_to_member" '(*)))) + (lambda (decoder) + "Reset the error state of DECODER and enters a search state that lasts +until a new member header (or the end of the stream) is found. After a +successful call to `lz-decompress-sync-to-member', data written with +`lz-decompress-write' will be consumed and 'lz-decompress-read' will return 0 +until a header is found. + +This function is useful to discard any data preceding the first member, or to +discard the rest of the current member, for example in case of a data +error. If the decoder is already at the beginning of a member, this function +does nothing." + (let ((ret (proc (lz-decoder->pointer decoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-sync-to-member + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-read + (let ((proc (lzlib-procedure int "LZ_decompress_read" (list '* '* int)))) + (lambda* (decoder file-bv #:optional (start 0) (count (bytevector-length file-bv))) + "Read up to COUNT bytes from the decoder stream, storing the results in FILE-BV. +Return the number of uncompressed bytes written, a non-negative positive integer." + (let ((ret (proc (lz-decoder->pointer decoder) + (bytevector->pointer file-bv start) + count))) + (if (< ret 0) + (throw 'lzlib-error 'lz-decompress-read (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-write + (let ((proc (lzlib-procedure int "LZ_decompress_write" (list '* '* int)))) + (lambda* (decoder bv #:optional (start 0) (count (bytevector-length bv))) + "Write up to COUNT bytes from BV to the decoder stream. Return the +number of uncompressed bytes written, a non-negative integer." + (let ((ret (proc (lz-decoder->pointer decoder) + (bytevector->pointer bv start) + count))) + (if (< ret 0) + (throw 'lzlib-error 'lz-decompress-write (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-write-size + (let ((proc (lzlib-procedure int "LZ_decompress_write_size" '(*)))) + (lambda (decoder) + "Return the maximum number of bytes that can be immediately written +through the `lz-decompress-write' function. + +It is guaranteed that an immediate call to `lz-decompress-write' will accept a +SIZE up to the returned number of bytes. " + (let ((ret (proc (lz-decoder->pointer decoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-write-size (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-error + (let ((proc (lzlib-procedure int "LZ_decompress_errno" '(*)))) + (lambda (decoder) + "DECODER can be a Scheme object or a pointer." + (let* ((error-number (proc (if (lz-decoder? decoder) + (lz-decoder->pointer decoder) + decoder)))) + error-number)))) + +(define lz-decompress-finished? + (let ((proc (lzlib-procedure int "LZ_decompress_finished" '(*)))) + (lambda (decoder) + "Return #t if all the data have been read and `lz-decompress-close' can +be safely called. Otherwise return #f." + (let ((ret (proc (lz-decoder->pointer decoder)))) + (match ret + (1 #t) + (0 #f) + (_ (throw 'lzlib-error 'lz-decompress-finished? (lz-decompress-error decoder)))))))) + +(define lz-decompress-member-finished? + (let ((proc (lzlib-procedure int "LZ_decompress_member_finished" '(*)))) + (lambda (decoder) + "Return #t if the current member, in a multimember data stream, has +been fully read and `lz-decompress-restart-member' can be safely called. +Otherwise return #f." + (let ((ret (proc (lz-decoder->pointer decoder)))) + (match ret + (1 #t) + (0 #f) + (_ (throw 'lzlib-error 'lz-decompress-member-finished? (lz-decompress-error decoder)))))))) + +(define lz-decompress-member-version + (let ((proc (lzlib-procedure int "LZ_decompress_member_version" '(*)))) + (lambda (decoder) + (let ((ret (proc (lz-decoder->pointer decoder)))) + "Return the version of current member from member header." + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-data-position + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-dictionary-size + (let ((proc (lzlib-procedure int "LZ_decompress_dictionary_size" '(*)))) + (lambda (decoder) + (let ((ret (proc (lz-decoder->pointer decoder)))) + "Return the dictionary size of current member from member header." + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-member-position + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-data-crc + (let ((proc (lzlib-procedure unsigned-int "LZ_decompress_data_crc" '(*)))) + (lambda (decoder) + (let ((ret (proc (lz-decoder->pointer decoder)))) + "Return the 32 bit Cyclic Redundancy Check of the data decompressed +from the current member. The returned value is valid only when +`lz-decompress-member-finished' returns #t. " + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-member-position + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-data-position + (let ((proc (lzlib-procedure uint64 "LZ_decompress_data_position" '(*)))) + (lambda (decoder) + "Return the number of decompressed bytes already produced, but perhaps +not yet read, in the current member." + (let ((ret (proc (lz-decoder->pointer decoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-data-position + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-member-position + (let ((proc (lzlib-procedure uint64 "LZ_decompress_member_position" '(*)))) + (lambda (decoder) + "Return the number of input bytes already decompressed in the current +member." + (let ((ret (proc (lz-decoder->pointer decoder)))) + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-member-position + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-total-in-size + (let ((proc (lzlib-procedure uint64 "LZ_decompress_total_in_size" '(*)))) + (lambda (decoder) + (let ((ret (proc (lz-decoder->pointer decoder)))) + "Return the total number of input bytes already compressed." + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-total-in-size + (lz-decompress-error decoder)) + ret))))) + +(define lz-decompress-total-out-size + (let ((proc (lzlib-procedure uint64 "LZ_decompress_total_out_size" '(*)))) + (lambda (decoder) + (let ((ret (proc (lz-decoder->pointer decoder)))) + "Return the total number of compressed bytes already produced, but +perhaps not yet read." + (if (= ret -1) + (throw 'lzlib-error 'lz-decompress-total-out-size + (lz-decompress-error decoder)) + ret))))) + + +;; High level functions. +(define %lz-decompress-input-buffer-size (* 64 1024)) + +(define* (lzread! decoder file-port bv + #:optional (start 0) (count (bytevector-length bv))) + "Read up to COUNT bytes from FILE-PORT into BV at offset START. Return the +number of uncompressed bytes actually read; it is zero if COUNT is zero or if +the end-of-stream has been reached." + ;; WARNING: Because we don't alternate between lz-reads and lz-writes, we can't + ;; process more than %lz-decompress-input-buffer-size from the file-port. + (when (> count %lz-decompress-input-buffer-size) + (set! count %lz-decompress-input-buffer-size)) + (let* ((written 0) + (read 0) + (file-bv (get-bytevector-n file-port count))) + (unless (eof-object? file-bv) + (begin + (while (and (< 0 (lz-decompress-write-size decoder)) + (< written (bytevector-length file-bv))) + (set! written (+ written + (lz-decompress-write decoder file-bv written + (- (bytevector-length file-bv) written))))))) + (let loop ((rd 0)) + (if (< start (bytevector-length bv)) + (begin + (set! rd (lz-decompress-read decoder bv start (- (bytevector-length bv) start))) + (set! start (+ start rd)) + (set! read (+ read rd))) + (set! rd 0)) + (unless (= rd 0) + (loop rd))) + read)) + +(define* (lzwrite encoder bv lz-port + #:optional (start 0) (count (bytevector-length bv))) + "Write up to COUNT bytes from BV at offset START into LZ-PORT. Return +the number of uncompressed bytes written, a non-negative integer." + (let ((written 0) + (read 0)) + (while (and (< 0 (lz-compress-write-size encoder)) + (< written count)) + (set! written (+ written + (lz-compress-write encoder bv (+ start written) (- count written))))) + (when (= written 0) + (lz-compress-finish encoder)) + (let ((lz-bv (make-bytevector written))) + (let loop ((rd 0)) + (set! rd (lz-compress-read encoder lz-bv 0 (bytevector-length lz-bv))) + (put-bytevector lz-port lz-bv 0 rd) + (set! read (+ read rd)) + (unless (= rd 0) + (loop rd)))) + ;; `written' is the total byte count of uncompressed data. + written)) + + +;;; +;;; Port interface. +;;; + +;; Alist of (levels (dictionary-size match-length-limit)). 0 is the fastest. +;; See bbexample.c in lzlib's source. +(define %compression-levels + `((0 (65535 16)) + (1 (,(bitwise-arithmetic-shift-left 1 20) 5)) + (2 (,(bitwise-arithmetic-shift-left 3 19) 6)) + (3 (,(bitwise-arithmetic-shift-left 1 21) 8)) + (4 (,(bitwise-arithmetic-shift-left 3 20) 12)) + (5 (,(bitwise-arithmetic-shift-left 1 22) 20)) + (6 (,(bitwise-arithmetic-shift-left 1 23) 36)) + (7 (,(bitwise-arithmetic-shift-left 1 24) 68)) + (8 (,(bitwise-arithmetic-shift-left 3 23) 132)) + (9 (,(bitwise-arithmetic-shift-left 1 25) 273)))) + +(define %default-compression-level + 6) + +(define* (make-lzip-input-port port) + "Return an input port that decompresses data read from PORT, a file port. +PORT is automatically closed when the resulting port is closed." + (define decoder (lz-decompress-open)) + + (define (read! bv start count) + (lzread! decoder port bv start count)) + + (make-custom-binary-input-port "lzip-input" read! #f #f + (lambda () + (lz-decompress-close decoder) + (close-port port)))) + +(define* (make-lzip-output-port port + #:key + (level %default-compression-level)) + "Return an output port that compresses data at the given LEVEL, using PORT, +a file port, as its sink. PORT is automatically closed when the resulting +port is closed." + (define encoder (apply lz-compress-open + (car (assoc-ref %compression-levels level)))) + + (define (write! bv start count) + (lzwrite encoder bv port start count)) + + (make-custom-binary-output-port "lzip-output" write! #f #f + (lambda () + (lz-compress-finish encoder) + ;; "lz-read" the trailing metadata added by `lz-compress-finish'. + (let ((lz-bv (make-bytevector (* 64 1024)))) + (let loop ((rd 0)) + (set! rd (lz-compress-read encoder lz-bv 0 (bytevector-length lz-bv))) + (put-bytevector port lz-bv 0 rd) + (unless (= rd 0) + (loop rd)))) + (lz-compress-close encoder) + (close-port port)))) + +(define* (call-with-lzip-input-port port proc) + "Call PROC with a port that wraps PORT and decompresses data read from it. +PORT is closed upon completion." + (let ((lzip (make-lzip-input-port port))) + (dynamic-wind + (const #t) + (lambda () + (proc lzip)) + (lambda () + (close-port lzip))))) + +(define* (call-with-lzip-output-port port proc + #:key + (level %default-compression-level)) + "Call PROC with an output port that wraps PORT and compresses data. PORT is +close upon completion." + (let ((lzip (make-lzip-output-port port + #:level level))) + (dynamic-wind + (const #t) + (lambda () + (proc lzip)) + (lambda () + (close-port lzip))))) + +;;; lzlib.scm ends here diff --git a/guix/self.scm b/guix/self.scm index 7098e4ea29..74ea65240c 100644 --- a/guix/self.scm +++ b/guix/self.scm @@ -925,6 +925,7 @@ Info manual." %store-database-directory %config-directory %libz + ;; TODO: %liblz %gzip %bzip2 %xz)) |