gnu: Add tlp service.

* gnu/services/pm.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add gnu/services/tlp.scm.
* doc/guix.texi (Power management Services): New section.

Signed-off-by: Clément Lassieur <clement@lassieur.org>

1 files changed, 505 insertions, 0 deletions

diff --git a/doc/guix.texi b/doc/guix.texi
index fb0862096a..5649b089c2 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -216,6 +216,7 @@ Services
 * VPN Services::                VPN daemons.
 * Network File System::         NFS related services.
 * Continuous Integration::      The Cuirass service.
+* Power management Services::   The TLP tool.
 * Miscellaneous Services::      Other services.
 
 Defining Services
@@ -8451,6 +8452,7 @@ declaration.
 * VPN Services::                VPN daemons.
 * Network File System::         NFS related services.
 * Continuous Integration::      The Cuirass service.
+* Power management Services::   The TLP tool.
 * Miscellaneous Services::      Other services.
 @end menu
 
@@ -13708,6 +13710,509 @@ The Cuirass package to use.
 @end table
 @end deftp
 
+@node Power management Services
+@subsubsection Power management Services
+
+@cindex power management with TLP
+The @code{(gnu services pm)} module provides a Guix service definition
+for the Linux power management tool TLP.
+
+TLP enables various powersaving modes in userspace and kernel.
+Contrary to @code{upower-service}, it is not a passive,
+monitoring tool, as it will apply custom settings each time a new power
+source is detected.  More information can be found at
+@uref{http://linrunner.de/en/tlp/tlp.html, TLP home page}.
+
+@deffn {Scheme Variable} tlp-service-type
+The service type for the TLP tool.  Its value should be a valid
+TLP configuration (see below).  For example:
+@example
+(service tlp-service-type (tlp-configuration))
+@end example
+@end deffn
+
+By default TLP does not need much configuration but most TLP parameters
+can be tweaked using @code{tlp-configuration}.
+
+Each parameter definition is preceded by its type; for example,
+@samp{boolean foo} indicates that the @code{foo} parameter
+should be specified as a boolean.  Types starting with
+@code{maybe-} denote parameters that won't show up in TLP config file
+when their value is @code{'disabled}.
+
+@c The following documentation was initially generated by
+@c (generate-tlp-documentation) in (gnu services pm).  Manually maintained
+@c documentation is better, so we shouldn't hesitate to edit below as
+@c needed.  However if the change you want to make to this documentation
+@c can be done in an automated way, it's probably easier to change
+@c (generate-documentation) than to make it below and have to deal with
+@c the churn as TLP updates.
+
+Available @code{tlp-configuration} fields are:
+
+@deftypevr {@code{tlp-configuration} parameter} package tlp
+The TLP package.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean tlp-enable?
+Set to true if you wish to enable TLP.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string tlp-default-mode
+Default mode when no power supply can be detected.  Alternatives are AC
+and BAT.
+
+Defaults to @samp{"AC"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} non-negative-integer disk-idle-secs-on-ac
+Number of seconds Linux kernel has to wait after the disk goes idle,
+before syncing on AC.
+
+Defaults to @samp{0}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} non-negative-integer disk-idle-secs-on-bat
+Same as @code{disk-idle-ac} but on BAT mode.
+
+Defaults to @samp{2}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} non-negative-integer max-lost-work-secs-on-ac
+Dirty pages flushing periodicity, expressed in seconds.
+
+Defaults to @samp{15}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} non-negative-integer max-lost-work-secs-on-bat
+Same as @code{max-lost-work-secs-on-ac} but on BAT mode.
+
+Defaults to @samp{60}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-space-separated-string-list cpu-scaling-governor-on-ac
+CPU frequency scaling governor on AC mode.  With intel_pstate driver,
+alternatives are powersave and performance.  With acpi-cpufreq driver,
+alternatives are ondemand, powersave, performance and conservative.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-space-separated-string-list cpu-scaling-governor-on-bat
+Same as @code{cpu-scaling-governor-on-ac} but on BAT mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-scaling-min-freq-on-ac
+Set the min available frequency for the scaling governor on AC.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-scaling-max-freq-on-ac
+Set the max available frequency for the scaling governor on AC.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-scaling-min-freq-on-bat
+Set the min available frequency for the scaling governor on BAT.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-scaling-max-freq-on-bat
+Set the max available frequency for the scaling governor on BAT.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-min-perf-on-ac
+Limit the min P-state to control the power dissipation of the CPU, in AC
+mode.  Values are stated as a percentage of the available performance.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-max-perf-on-ac
+Limit the max P-state to control the power dissipation of the CPU, in AC
+mode.  Values are stated as a percentage of the available performance.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-min-perf-on-bat
+Same as @code{cpu-min-perf-on-ac} on BAT mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-non-negative-integer cpu-max-perf-on-bat
+Same as @code{cpu-max-perf-on-ac} on BAT mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-boolean cpu-boost-on-ac?
+Enable CPU turbo boost feature on AC mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-boolean cpu-boost-on-bat?
+Same as @code{cpu-boost-on-ac?} on BAT mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean sched-powersave-on-ac?
+Allow Linux kernel to minimize the number of CPU cores/hyper-threads
+used under light load conditions.
+
+Defaults to @samp{#f}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean sched-powersave-on-bat?
+Same as @code{sched-powersave-on-ac?} but on BAT mode.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean nmi-watchdog?
+Enable Linux kernel NMI watchdog.
+
+Defaults to @samp{#f}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-string phc-controls
+For Linux kernels with PHC patch applied, change CPU voltages.  An
+example value would be @samp{"F:V F:V F:V F:V"}.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string energy-perf-policy-on-ac
+Set CPU performance versus energy saving policy on AC.  Alternatives are
+performance, normal, powersave.
+
+Defaults to @samp{"performance"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string energy-perf-policy-on-bat
+Same as @code{energy-perf-policy-ac} but on BAT mode.
+
+Defaults to @samp{"powersave"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} space-separated-string-list disks-devices
+Hard disk devices.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} space-separated-string-list disk-apm-level-on-ac
+Hard disk advanced power management level.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} space-separated-string-list disk-apm-level-on-bat
+Same as @code{disk-apm-bat} but on BAT mode.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-space-separated-string-list disk-spindown-timeout-on-ac
+Hard disk spin down timeout.  One value has to be specified for each
+declared hard disk.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-space-separated-string-list disk-spindown-timeout-on-bat
+Same as @code{disk-spindown-timeout-on-ac} but on BAT mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-space-separated-string-list disk-iosched
+Select IO scheduler for disk devices.  One value has to be specified for
+each declared hard disk.  Example alternatives are cfq, deadline and
+noop.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string sata-linkpwr-on-ac
+SATA aggressive link power management (ALPM) level.  Alternatives are
+min_power, medium_power, max_performance.
+
+Defaults to @samp{"max_performance"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string sata-linkpwr-on-bat
+Same as @code{sata-linkpwr-ac} but on BAT mode.
+
+Defaults to @samp{"min_power"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-string sata-linkpwr-blacklist
+Exclude specified SATA host devices for link power management.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-on-off-boolean ahci-runtime-pm-on-ac?
+Enable Runtime Power Management for AHCI controller and disks on AC
+mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-on-off-boolean ahci-runtime-pm-on-bat?
+Same as @code{ahci-runtime-pm-on-ac} on BAT mode.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} non-negative-integer ahci-runtime-pm-timeout
+Seconds of inactivity before disk is suspended.
+
+Defaults to @samp{15}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string pcie-aspm-on-ac
+PCI Express Active State Power Management level.  Alternatives are
+default, performance, powersave.
+
+Defaults to @samp{"performance"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string pcie-aspm-on-bat
+Same as @code{pcie-aspm-ac} but on BAT mode.
+
+Defaults to @samp{"powersave"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string radeon-power-profile-on-ac
+Radeon graphics clock speed level.  Alternatives are low, mid, high,
+auto, default.
+
+Defaults to @samp{"high"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string radeon-power-profile-on-bat
+Same as @code{radeon-power-ac} but on BAT mode.
+
+Defaults to @samp{"low"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string radeon-dpm-state-on-ac
+Radeon dynamic power management method (DPM).  Alternatives are battery,
+performance.
+
+Defaults to @samp{"performance"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string radeon-dpm-state-on-bat
+Same as @code{radeon-dpm-state-ac} but on BAT mode.
+
+Defaults to @samp{"battery"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string radeon-dpm-perf-level-on-ac
+Radeon DPM performance level.  Alternatives are auto, low, high.
+
+Defaults to @samp{"auto"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string radeon-dpm-perf-level-on-bat
+Same as @code{radeon-dpm-perf-ac} but on BAT mode.
+
+Defaults to @samp{"auto"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} on-off-boolean wifi-pwr-on-ac?
+Wifi power saving mode.
+
+Defaults to @samp{#f}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} on-off-boolean wifi-pwr-on-bat?
+Same as @code{wifi-power-ac?} but on BAT mode.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} y-n-boolean wol-disable?
+Disable wake on LAN.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} non-negative-integer sound-power-save-on-ac
+Timeout duration in seconds before activating audio power saving on
+Intel HDA and AC97 devices.  A value of 0 disables power saving.
+
+Defaults to @samp{0}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} non-negative-integer sound-power-save-on-bat
+Same as @code{sound-powersave-ac} but on BAT mode.
+
+Defaults to @samp{1}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} y-n-boolean sound-power-save-controller?
+Disable controller in powersaving mode on Intel HDA devices.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean bay-poweroff-on-bat?
+Enable optical drive in UltraBay/MediaBay on BAT mode.  Drive can be
+powered on again by releasing (and reinserting) the eject lever or by
+pressing the disc eject button on newer models.
+
+Defaults to @samp{#f}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string bay-device
+Name of the optical drive device to power off.
+
+Defaults to @samp{"sr0"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string runtime-pm-on-ac
+Runtime Power Management for PCI(e) bus devices.  Alternatives are on
+and auto.
+
+Defaults to @samp{"on"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} string runtime-pm-on-bat
+Same as @code{runtime-pm-ac} but on BAT mode.
+
+Defaults to @samp{"auto"}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean runtime-pm-all?
+Runtime Power Management for all PCI(e) bus devices, except blacklisted
+ones.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-space-separated-string-list runtime-pm-blacklist
+Exclude specified PCI(e) devices adresses from Runtime Power Management.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} space-separated-string-list runtime-pm-driver-blacklist
+Exclude PCI(e) devices assigned to the specified drivers from Runtime
+Power Management.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean usb-autosuspend?
+Enable USB autosuspend feature.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-string usb-blacklist
+Exclude specified devices from USB autosuspend.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean usb-blacklist-wwan?
+Exclude WWAN devices from USB autosuspend.
+
+Defaults to @samp{#t}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-string usb-whitelist
+Include specified devices into USB autosuspend, even if they are already
+excluded by the driver or via @code{usb-blacklist-wwan?}.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} maybe-boolean usb-autosuspend-disable-on-shutdown?
+Enable USB autosuspend before shutdown.
+
+Defaults to @samp{disabled}.
+
+@end deftypevr
+
+@deftypevr {@code{tlp-configuration} parameter} boolean restore-device-state-on-startup?
+Restore radio device state (bluetooth, wifi, wwan) from previous
+shutdown on system startup.
+
+Defaults to @samp{#f}.
+
+@end deftypevr
+
 @node Miscellaneous Services
 @subsubsection Miscellaneous Services